| [ 0.000000] Initializing cgroup subsys cpuset |
| [ 0.000000] Initializing cgroup subsys cpu |
| [ 0.000000] Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.51-1 |
| [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=7d581789-2cdd-423e-9a8b-b89626891401 ro quiet |
| [ 0.000000] BIOS-provided physical RAM map: |
| [ 0.000000] BIOS-e820: 0000000000000000 - 0000000000001000 type 16 |
| [ 0.000000] BIOS-e820: 0000000000001000 - 00000000000a0000 (usable) |
| [ 0.000000] BIOS-e820: 00000000000c0000 - 0000000000100000 (reserved) |
| [ 0.000000] BIOS-e820: 0000000000100000 - 000000003ffd0000 (usable) |
| [ 0.000000] BIOS-e820: 000000003ffd0000 - 0000000040000000 type 16 |
| [ 0.000000] NX (Execute Disable) protection: active |
| [ 0.000000] SMBIOS 2.7 present. |
| [ 0.000000] DMI: ASUS A8N-E, BIOS 4.0-5562-gcf6c9cc 02/27/2014 |
| [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) |
| [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) |
| [ 0.000000] No AGP bridge found |
| [ 0.000000] last_pfn = 0x3ffd0 max_arch_pfn = 0x400000000 |
| [ 0.000000] MTRR default type: uncachable |
| [ 0.000000] MTRR fixed ranges enabled: |
| [ 0.000000] 00000-9FFFF write-back |
| [ 0.000000] A0000-BFFFF uncachable |
| [ 0.000000] C0000-FFFFF write-back |
| [ 0.000000] MTRR variable ranges enabled: |
| [ 0.000000] 0 base 0000000000 mask FFC0000000 write-back |
| [ 0.000000] 1 disabled |
| [ 0.000000] 2 disabled |
| [ 0.000000] 3 disabled |
| [ 0.000000] 4 disabled |
| [ 0.000000] 5 disabled |
| [ 0.000000] 6 disabled |
| [ 0.000000] 7 disabled |
| [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 |
| [ 0.000000] found SMP MP-table at [ffff8800000f0400] f0400 |
| [ 0.000000] initial memory mapped : 0 - 20000000 |
| [ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480 |
| [ 0.000000] init_memory_mapping: 0000000000000000-000000003ffd0000 |
| [ 0.000000] 0000000000 - 003fe00000 page 2M |
| [ 0.000000] 003fe00000 - 003ffd0000 page 4k |
| [ 0.000000] kernel direct mapping tables up to 3ffd0000 @ 1fffd000-20000000 |
| [ 0.000000] RAMDISK: 36bfa000 - 375f5000 |
| [ 0.000000] ACPI: RSDP 00000000000f0800 00014 (v00 CORE ) |
| [ 0.000000] ACPI: RSDT 000000003ffe2630 00040 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: FACP 000000003ffe3e10 00074 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: DSDT 000000003ffe2740 016CC (v01 CORE CB-DSDT 00000001 INTL 20140114) |
| [ 0.000000] ACPI: FACS 000000003ffe2700 00040 |
| [ 0.000000] ACPI: MCFG 000000003ffe3f10 0002C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: HPET 000000003ffe3f40 00038 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: APIC 000000003ffe3f80 0005A (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SRAT 000000003ffe3fe0 00090 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SLIT 000000003ffe4070 0002D (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SSDT 000000003ffe40a0 00166 (v02 CORE COREBOOT 0000002A CORE 0000002A) |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0 |
| [ 0.000000] SRAT: Node 0 PXM 0 0-a0000 |
| [ 0.000000] SRAT: Node 0 PXM 0 100000-40000000 |
| [ 0.000000] NUMA: Initialized distance table, cnt=1 |
| [ 0.000000] NUMA: Node 0 [0,a0000) + [100000,3ffd0000) -> [0,3ffd0000) |
| [ 0.000000] Initmem setup node 0 0000000000000000-000000003ffd0000 |
| [ 0.000000] NODE_DATA [000000003ffca000 - 000000003ffcefff] |
| [ 0.000000] [ffffea0000000000-ffffea0000dfffff] PMD -> [ffff88003e600000-ffff88003f3fffff] on node 0 |
| [ 0.000000] Zone PFN ranges: |
| [ 0.000000] DMA 0x00000010 -> 0x00001000 |
| [ 0.000000] DMA32 0x00001000 -> 0x00100000 |
| [ 0.000000] Normal empty |
| [ 0.000000] Movable zone start PFN for each node |
| [ 0.000000] early_node_map[2] active PFN ranges |
| [ 0.000000] 0: 0x00000010 -> 0x000000a0 |
| [ 0.000000] 0: 0x00000100 -> 0x0003ffd0 |
| [ 0.000000] On node 0 totalpages: 261984 |
| [ 0.000000] DMA zone: 56 pages used for memmap |
| [ 0.000000] DMA zone: 6 pages reserved |
| [ 0.000000] DMA zone: 3922 pages, LIFO batch:0 |
| [ 0.000000] DMA32 zone: 3528 pages used for memmap |
| [ 0.000000] DMA32 zone: 254472 pages, LIFO batch:31 |
| [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) |
| [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) |
| [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) |
| [ 0.000000] ACPI: IRQ0 used by override. |
| [ 0.000000] ACPI: IRQ2 used by override. |
| [ 0.000000] ACPI: IRQ9 used by override. |
| [ 0.000000] Using ACPI (MADT) for SMP configuration information |
| [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 |
| [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs |
| [ 0.000000] nr_irqs_gsi: 40 |
| [ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000010000 |
| [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000c0000 |
| [ 0.000000] PM: Registered nosave memory: 00000000000c0000 - 0000000000100000 |
| [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:c0000000) |
| [ 0.000000] Booting paravirtualized kernel on bare hardware |
| [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:1 nr_node_ids:1 |
| [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88003fc00000 s82944 r8192 d23552 u2097152 |
| [ 0.000000] pcpu-alloc: s82944 r8192 d23552 u2097152 alloc=1*2097152 |
| [ 0.000000] pcpu-alloc: [0] 0 |
| [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 258394 |
| [ 0.000000] Policy zone: DMA32 |
| [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=7d581789-2cdd-423e-9a8b-b89626891401 ro quiet |
| [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) |
| [ 0.000000] Checking aperture... |
| [ 0.000000] No AGP bridge found |
| [ 0.000000] Node 0: aperture @ f8000000 size 64 MB |
| [ 0.000000] Memory: 1014752k/1048384k available (3426k kernel code, 448k absent, 33184k reserved, 3312k data, 576k init) |
| [ 0.000000] Hierarchical RCU implementation. |
| [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. |
| [ 0.000000] NR_IRQS:33024 nr_irqs:256 16 |
| [ 0.000000] Console: colour dummy device 80x25 |
| [ 0.000000] console [tty0] enabled |
| [ 0.000000] hpet clockevent registered |
| [ 0.000000] Fast TSC calibration using PIT |
| [ 0.000000] Detected 2010.308 MHz processor. |
| [ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4020.61 BogoMIPS (lpj=8041232) |
| [ 0.004010] pid_max: default: 32768 minimum: 301 |
| [ 0.004065] Security Framework initialized |
| [ 0.004073] AppArmor: AppArmor disabled by boot time parameter |
| [ 0.004193] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) |
| [ 0.005303] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) |
| [ 0.005875] Mount-cache hash table entries: 256 |
| [ 0.006080] Initializing cgroup subsys cpuacct |
| [ 0.006086] Initializing cgroup subsys memory |
| [ 0.006106] Initializing cgroup subsys devices |
| [ 0.006109] Initializing cgroup subsys freezer |
| [ 0.006112] Initializing cgroup subsys net_cls |
| [ 0.006115] Initializing cgroup subsys blkio |
| [ 0.006129] Initializing cgroup subsys perf_event |
| [ 0.006171] tseg: 0000000000 |
| [ 0.006189] mce: CPU supports 5 MCE banks |
| [ 0.006229] SMP alternatives: switching to UP code |
| [ 0.009892] Freeing SMP alternatives: 8k freed |
| [ 0.009899] ACPI: Core revision 20110623 |
| [ 0.011103] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 |
| [ 0.012000] ..MP-BIOS bug: 8254 timer not connected to IO-APIC |
| [ 0.012000] ...trying to set up timer (IRQ0) through the 8259A ... |
| [ 0.012000] ..... (found apic 0 pin 0) ... |
| [ 0.054512] ....... works. |
| [ 0.054513] CPU0: AMD Athlon(tm) 64 Processor 3200+ stepping 00 |
| [ 0.056003] Performance Events: AMD PMU driver. |
| [ 0.056003] ... version: 0 |
| [ 0.056003] ... bit width: 48 |
| [ 0.056003] ... generic registers: 4 |
| [ 0.056003] ... value mask: 0000ffffffffffff |
| [ 0.056003] ... max period: 00007fffffffffff |
| [ 0.056003] ... fixed-purpose events: 0 |
| [ 0.056003] ... event mask: 000000000000000f |
| [ 0.056003] NMI watchdog enabled, takes one hw-pmu counter. |
| [ 0.056003] Brought up 1 CPUs |
| [ 0.056003] Total of 1 processors activated (4020.61 BogoMIPS). |
| [ 0.056003] devtmpfs: initialized |
| [ 0.056582] print_constraints: dummy: |
| [ 0.056650] NET: Registered protocol family 16 |
| [ 0.056785] node 0 link 0: io port [1000, 2fff] |
| [ 0.056788] TOM: 0000000040000000 aka 1024M |
| [ 0.056792] node 0 link 0: mmio [fc000000, fc0fffff] |
| [ 0.056796] bus: [00, 05] on node 0 link 0 |
| [ 0.056799] bus: 00 index 0 [io 0x0000-0xffff] |
| [ 0.056802] bus: 00 index 1 [mem 0x40000000-0xfcffffffff] |
| [ 0.056814] ACPI: bus type pci registered |
| [ 0.056892] PCI: MMCONFIG has no entries |
| [ 0.056899] PCI: Using configuration type 1 for base access |
| [ 0.057838] bio: create slab <bio-0> at 0 |
| [ 0.057946] ACPI: Added _OSI(Module Device) |
| [ 0.057949] ACPI: Added _OSI(Processor Device) |
| [ 0.057952] ACPI: Added _OSI(3.0 _SCP Extensions) |
| [ 0.057954] ACPI: Added _OSI(Processor Aggregator Device) |
| [ 0.058236] ACPI: EC: Look up EC in DSDT |
| [ 0.059151] ACPI: Interpreter enabled |
| [ 0.059156] ACPI: (supports S0 S5) |
| [ 0.059170] ACPI: Using IOAPIC for interrupt routing |
| [ 0.059192] PCI: MMCONFIG has no entries |
| [ 0.061139] ACPI: No dock devices found. |
| [ 0.061141] HEST: Table not found. |
| [ 0.061145] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| [ 0.062739] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05]) |
| [ 0.065955] pci_root PNP0A03:00: host bridge window [io 0x0d00-0x2fff] |
| [ 0.065959] pci_root PNP0A03:00: host bridge window [mem 0xfc000000-0xfc0fffff] |
| [ 0.065962] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] |
| [ 0.065981] pci 0000:00:00.0: [10de:005e] type 0 class 0x000580 |
| [ 0.066051] pci 0000:00:01.0: [10de:0050] type 0 class 0x000601 |
| [ 0.066058] pci 0000:00:01.0: reg 10: [io 0x2400-0x247f] |
| [ 0.066087] pci 0000:00:01.1: [10de:0052] type 0 class 0x000c05 |
| [ 0.066095] pci 0000:00:01.1: reg 10: [io 0x2800-0x281f] |
| [ 0.066106] pci 0000:00:01.1: reg 20: [io 0x2480-0x24bf] |
| [ 0.066111] pci 0000:00:01.1: reg 24: [io 0x24c0-0x24ff] |
| [ 0.066125] pci 0000:00:01.1: PME# supported from D3hot D3cold |
| [ 0.066144] pci 0000:00:02.0: [10de:005a] type 0 class 0x000c03 |
| [ 0.066151] pci 0000:00:02.0: reg 10: [mem 0xfc000000-0xfc000fff] |
| [ 0.066175] pci 0000:00:02.0: supports D1 D2 |
| [ 0.066178] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.066192] pci 0000:00:02.1: [10de:005b] type 0 class 0x000c03 |
| [ 0.066201] pci 0000:00:02.1: reg 10: [mem 0xfc005000-0xfc0050ff] |
| [ 0.066230] pci 0000:00:02.1: supports D1 D2 |
| [ 0.066233] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.066253] pci 0000:00:04.0: [10de:0059] type 0 class 0x000401 |
| [ 0.066260] pci 0000:00:04.0: reg 10: [io 0x1c00-0x1cff] |
| [ 0.066265] pci 0000:00:04.0: reg 14: [io 0x2000-0x20ff] |
| [ 0.066270] pci 0000:00:04.0: reg 18: [mem 0xfc001000-0xfc001fff] |
| [ 0.066290] pci 0000:00:04.0: supports D1 D2 |
| [ 0.066303] pci 0000:00:06.0: [10de:0053] type 0 class 0x000101 |
| [ 0.066319] pci 0000:00:06.0: reg 20: [io 0x2820-0x282f] |
| [ 0.066346] pci 0000:00:07.0: [10de:0054] type 0 class 0x000101 |
| [ 0.066353] pci 0000:00:07.0: reg 10: [io 0x2850-0x2857] |
| [ 0.066358] pci 0000:00:07.0: reg 14: [io 0x2878-0x287b] |
| [ 0.066362] pci 0000:00:07.0: reg 18: [io 0x2858-0x285f] |
| [ 0.066367] pci 0000:00:07.0: reg 1c: [io 0x287c-0x287f] |
| [ 0.066372] pci 0000:00:07.0: reg 20: [io 0x2830-0x283f] |
| [ 0.066377] pci 0000:00:07.0: reg 24: [mem 0xfc002000-0xfc002fff] |
| [ 0.066401] pci 0000:00:08.0: [10de:0055] type 0 class 0x000101 |
| [ 0.066408] pci 0000:00:08.0: reg 10: [io 0x2860-0x2867] |
| [ 0.066413] pci 0000:00:08.0: reg 14: [io 0x2880-0x2883] |
| [ 0.066418] pci 0000:00:08.0: reg 18: [io 0x2868-0x286f] |
| [ 0.066423] pci 0000:00:08.0: reg 1c: [io 0x2884-0x2887] |
| [ 0.066428] pci 0000:00:08.0: reg 20: [io 0x2840-0x284f] |
| [ 0.066433] pci 0000:00:08.0: reg 24: [mem 0xfc003000-0xfc003fff] |
| [ 0.066456] pci 0000:00:09.0: [10de:005c] type 1 class 0x000604 |
| [ 0.066488] pci 0000:00:0a.0: [10de:0057] type 0 class 0x000680 |
| [ 0.066497] pci 0000:00:0a.0: reg 10: [mem 0xfc004000-0xfc004fff] |
| [ 0.066502] pci 0000:00:0a.0: reg 14: [io 0x2870-0x2877] |
| [ 0.066529] pci 0000:00:0a.0: supports D1 D2 |
| [ 0.066531] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.066549] pci 0000:00:0b.0: [10de:005d] type 1 class 0x000604 |
| [ 0.066574] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.066590] pci 0000:00:0c.0: [10de:005d] type 1 class 0x000604 |
| [ 0.066615] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.066632] pci 0000:00:0d.0: [10de:005d] type 1 class 0x000604 |
| [ 0.066656] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.066672] pci 0000:00:0e.0: [10de:005d] type 1 class 0x000604 |
| [ 0.066696] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.066717] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600 |
| [ 0.066738] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600 |
| [ 0.066756] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600 |
| [ 0.066773] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600 |
| [ 0.066822] pci 0000:00:09.0: PCI bridge to [bus 01-01] (subtractive decode) |
| [ 0.066828] pci 0000:00:09.0: bridge window [io 0x0d00-0x2fff] (subtractive decode) |
| [ 0.066831] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff] (subtractive decode) |
| [ 0.066835] pci 0000:00:09.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) |
| [ 0.066854] pci 0000:00:0b.0: PCI bridge to [bus 02-02] |
| [ 0.066875] pci 0000:00:0c.0: PCI bridge to [bus 03-03] |
| [ 0.066896] pci 0000:00:0d.0: PCI bridge to [bus 04-04] |
| [ 0.066916] pci 0000:00:0e.0: PCI bridge to [bus 05-05] |
| [ 0.066929] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] |
| [ 0.067071] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIC._PRT] |
| [ 0.067102] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e) |
| [ 0.075734] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled. |
| [ 0.075825] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled. |
| [ 0.075912] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled. |
| [ 0.076007] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled. |
| [ 0.076095] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled. |
| [ 0.076183] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled. |
| [ 0.076263] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 *21 22 23) |
| [ 0.076335] ACPI: PCI Interrupt Link [LUEH] (IRQs *20 21 22 23) |
| [ 0.076416] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 *22 23) |
| [ 0.076503] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled. |
| [ 0.076590] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled. |
| [ 0.076682] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 *23) |
| [ 0.076771] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 *22 23) |
| [ 0.076863] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 *23) |
| [ 0.077028] vgaarb: loaded |
| [ 0.077091] PCI: Using ACPI for IRQ routing |
| [ 0.077095] PCI: pci_cache_line_size set to 64 bytes |
| [ 0.077145] reserve RAM buffer: 000000003ffd0000 - 000000003fffffff |
| [ 0.077325] HPET: 3 timers in total, 0 timers will be used for per-cpu timer |
| [ 0.077331] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 |
| [ 0.077335] hpet0: 3 comparators, 32-bit 25.000000 MHz counter |
| [ 0.080105] Switching to clocksource hpet |
| [ 0.082646] pnp: PnP ACPI init |
| [ 0.082673] ACPI: bus type pnp registered |
| [ 0.084336] pnp 00:00: [bus 00-05] |
| [ 0.084340] pnp 00:00: [io 0x0d00-0x2fff window] |
| [ 0.084343] pnp 00:00: [mem 0xfc000000-0xfc0fffff window] |
| [ 0.084346] pnp 00:00: [io 0x0cf8-0x0cff] |
| [ 0.084351] pnp 00:00: [io 0x0000-0x0cf7 window] |
| [ 0.084407] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) |
| [ 0.084637] pnp 00:01: [io 0x0060] |
| [ 0.084639] pnp 00:01: [io 0x0064] |
| [ 0.084654] pnp 00:01: [irq 1] |
| [ 0.084694] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active) |
| [ 0.084728] pnp 00:02: [irq 12] |
| [ 0.084767] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active) |
| [ 0.084797] pnp 00:03: [io 0x0378-0x0387] |
| [ 0.084804] pnp 00:03: [irq 7] |
| [ 0.084841] pnp 00:03: Plug and Play ACPI device, IDs PNP0400 (active) |
| [ 0.084872] pnp 00:04: [io 0x03f0-0x03f7] |
| [ 0.084879] pnp 00:04: [irq 6] |
| [ 0.084881] pnp 00:04: [dma 2] |
| [ 0.084921] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active) |
| [ 0.084926] pnp: PnP ACPI: found 5 devices |
| [ 0.084928] ACPI: ACPI bus type pnp unregistered |
| [ 0.092019] PCI: max bus depth: 1 pci_try_num: 2 |
| [ 0.092051] pci 0000:00:09.0: PCI bridge to [bus 01-01] |
| [ 0.092056] pci 0000:00:0b.0: PCI bridge to [bus 02-02] |
| [ 0.092062] pci 0000:00:0c.0: PCI bridge to [bus 03-03] |
| [ 0.092067] pci 0000:00:0d.0: PCI bridge to [bus 04-04] |
| [ 0.092072] pci 0000:00:0e.0: PCI bridge to [bus 05-05] |
| [ 0.092083] pci 0000:00:09.0: setting latency timer to 64 |
| [ 0.092088] pci 0000:00:0b.0: setting latency timer to 64 |
| [ 0.092092] pci 0000:00:0c.0: setting latency timer to 64 |
| [ 0.092097] pci 0000:00:0d.0: setting latency timer to 64 |
| [ 0.092102] pci 0000:00:0e.0: setting latency timer to 64 |
| [ 0.092106] pci_bus 0000:00: resource 4 [io 0x0d00-0x2fff] |
| [ 0.092109] pci_bus 0000:00: resource 5 [mem 0xfc000000-0xfc0fffff] |
| [ 0.092112] pci_bus 0000:00: resource 6 [io 0x0000-0x0cf7] |
| [ 0.092115] pci_bus 0000:01: resource 4 [io 0x0d00-0x2fff] |
| [ 0.092118] pci_bus 0000:01: resource 5 [mem 0xfc000000-0xfc0fffff] |
| [ 0.092121] pci_bus 0000:01: resource 6 [io 0x0000-0x0cf7] |
| [ 0.092194] NET: Registered protocol family 2 |
| [ 0.092302] IP route cache hash table entries: 32768 (order: 6, 262144 bytes) |
| [ 0.093028] TCP established hash table entries: 131072 (order: 9, 2097152 bytes) |
| [ 0.095168] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) |
| [ 0.096254] TCP: Hash tables configured (established 131072 bind 65536) |
| [ 0.096258] TCP reno registered |
| [ 0.096274] UDP hash table entries: 512 (order: 2, 16384 bytes) |
| [ 0.096297] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) |
| [ 0.096448] NET: Registered protocol family 1 |
| [ 0.096684] ACPI: PCI Interrupt Link [LUOH] enabled at IRQ 21 |
| [ 0.096817] ACPI: PCI Interrupt Link [LUEH] enabled at IRQ 20 |
| [ 0.096871] pci 0000:00:00.0: Found disabled HT MSI Mapping |
| [ 0.096875] pci 0000:00:09.0: Enabling HT MSI Mapping |
| [ 0.096906] pci 0000:00:00.0: Found disabled HT MSI Mapping |
| [ 0.096912] pci 0000:00:0a.0: Enabling HT MSI Mapping |
| [ 0.096946] pci 0000:00:00.0: Found disabled HT MSI Mapping |
| [ 0.096951] pci 0000:00:0b.0: Enabling HT MSI Mapping |
| [ 0.096957] pci 0000:00:0b.0: Found enabled HT MSI Mapping |
| [ 0.096995] pci 0000:00:00.0: Found disabled HT MSI Mapping |
| [ 0.097000] pci 0000:00:0c.0: Enabling HT MSI Mapping |
| [ 0.097006] pci 0000:00:0c.0: Found enabled HT MSI Mapping |
| [ 0.097046] pci 0000:00:00.0: Found disabled HT MSI Mapping |
| [ 0.097051] pci 0000:00:0d.0: Enabling HT MSI Mapping |
| [ 0.097057] pci 0000:00:0d.0: Found enabled HT MSI Mapping |
| [ 0.097100] pci 0000:00:00.0: Found disabled HT MSI Mapping |
| [ 0.097105] pci 0000:00:0e.0: Enabling HT MSI Mapping |
| [ 0.097111] pci 0000:00:0e.0: Found enabled HT MSI Mapping |
| [ 0.097124] PCI: CLS 64 bytes, default 64 |
| [ 0.097200] Unpacking initramfs... |
| [ 0.423316] Freeing initrd memory: 10220k freed |
| [ 0.434559] platform rtc_cmos: registered platform RTC device (no PNP device found) |
| [ 0.434986] audit: initializing netlink socket (disabled) |
| [ 0.435001] type=2000 audit(1043305179.432:1): initialized |
| [ 0.452326] HugeTLB registered 2 MB page size, pre-allocated 0 pages |
| [ 0.452718] VFS: Disk quotas dquot_6.5.2 |
| [ 0.452749] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) |
| [ 0.452834] msgmni has been set to 2001 |
| [ 0.453012] alg: No test for stdrng (krng) |
| [ 0.453041] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) |
| [ 0.453045] io scheduler noop registered |
| [ 0.453047] io scheduler deadline registered |
| [ 0.453059] io scheduler cfq registered (default) |
| [ 0.453274] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 |
| [ 0.453306] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 |
| [ 0.453308] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 |
| [ 0.453554] ERST: Table is not found! |
| [ 0.453556] GHES: HEST is not enabled! |
| [ 0.453634] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
| [ 0.473933] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A |
| [ 0.474328] Linux agpgart interface v0.103 |
| [ 0.474458] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 |
| [ 0.477101] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| [ 0.477108] serio: i8042 AUX port at 0x60,0x64 irq 12 |
| [ 0.477260] mousedev: PS/2 mouse device common for all mice |
| [ 0.477330] rtc_cmos rtc_cmos: RTC can wake from S4 |
| [ 0.477447] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 |
| [ 0.477475] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs |
| [ 0.477486] cpuidle: using governor ladder |
| [ 0.477488] cpuidle: using governor menu |
| [ 0.477722] TCP cubic registered |
| [ 0.477759] NET: Registered protocol family 10 |
| [ 0.478317] Mobile IPv6 |
| [ 0.478320] NET: Registered protocol family 17 |
| [ 0.478325] Registering the dns_resolver key type |
| [ 0.478465] PM: Hibernation image not present or could not be loaded. |
| [ 0.478482] registered taskstats version 1 |
| [ 0.478855] rtc_cmos rtc_cmos: setting system clock to 2003-01-23 06:59:40 UTC (1043305180) |
| [ 0.478891] Initializing network drop monitor service |
| [ 0.480535] Freeing unused kernel memory: 576k freed |
| [ 0.480932] Write protecting the kernel read-only data: 6144k |
| [ 0.484484] Freeing unused kernel memory: 652k freed |
| [ 0.490799] Freeing unused kernel memory: 688k freed |
| [ 0.512238] udevd[44]: starting version 175 |
| [ 0.570226] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. |
| [ 0.584064] forcedeth 0000:00:0a.0: enabling device (0000 -> 0003) |
| [ 0.584247] ACPI: PCI Interrupt Link [LEMA] enabled at IRQ 23 |
| [ 0.584267] forcedeth 0000:00:0a.0: setting latency timer to 64 |
| [ 0.615959] usbcore: registered new interface driver usbfs |
| [ 0.615994] usbcore: registered new interface driver hub |
| [ 0.618760] SCSI subsystem initialized |
| [ 0.625865] usbcore: registered new device driver usb |
| [ 0.626503] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| [ 0.656374] libata version 3.00 loaded. |
| [ 0.676846] FDC 0 is a post-1991 82077 |
| [ 1.108721] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:e0:81:54:32:66 |
| [ 1.108727] forcedeth 0000:00:0a.0: highdma csum gbit lnktim desc-v3 |
| [ 1.109151] ehci_hcd 0000:00:02.1: setting latency timer to 64 |
| [ 1.109155] ehci_hcd 0000:00:02.1: EHCI Host Controller |
| [ 1.109188] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 |
| [ 1.109216] ehci_hcd 0000:00:02.1: debug port 1 |
| [ 1.109221] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported |
| [ 1.109247] ehci_hcd 0000:00:02.1: irq 20, io mem 0xfc005000 |
| [ 1.120012] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 |
| [ 1.120045] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 |
| [ 1.120049] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.120052] usb usb1: Product: EHCI Host Controller |
| [ 1.120054] usb usb1: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd |
| [ 1.120057] usb usb1: SerialNumber: 0000:00:02.1 |
| [ 1.120211] hub 1-0:1.0: USB hub found |
| [ 1.120218] hub 1-0:1.0: 10 ports detected |
| [ 1.120793] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver |
| [ 1.120846] ohci_hcd 0000:00:02.0: setting latency timer to 64 |
| [ 1.120849] ohci_hcd 0000:00:02.0: OHCI Host Controller |
| [ 1.120863] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 |
| [ 1.120898] ohci_hcd 0000:00:02.0: irq 21, io mem 0xfc000000 |
| [ 1.178030] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 |
| [ 1.178035] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.178039] usb usb2: Product: OHCI Host Controller |
| [ 1.178041] usb usb2: Manufacturer: Linux 3.2.0-4-amd64 ohci_hcd |
| [ 1.178044] usb usb2: SerialNumber: 0000:00:02.0 |
| [ 1.178307] hub 2-0:1.0: USB hub found |
| [ 1.178315] hub 2-0:1.0: 10 ports detected |
| [ 1.179667] sata_nv 0000:00:07.0: version 3.5 |
| [ 1.179852] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 22 |
| [ 1.179936] sata_nv 0000:00:07.0: setting latency timer to 64 |
| [ 1.180491] scsi0 : sata_nv |
| [ 1.182293] scsi1 : sata_nv |
| [ 1.182389] ata1: SATA max UDMA/133 cmd 0x2850 ctl 0x2878 bmdma 0x2830 irq 22 |
| [ 1.182393] ata2: SATA max UDMA/133 cmd 0x2858 ctl 0x287c bmdma 0x2838 irq 22 |
| [ 1.182691] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 22 |
| [ 1.182755] sata_nv 0000:00:08.0: setting latency timer to 64 |
| [ 1.183165] scsi2 : sata_nv |
| [ 1.183289] scsi3 : sata_nv |
| [ 1.183350] ata3: SATA max UDMA/133 cmd 0x2860 ctl 0x2880 bmdma 0x2840 irq 22 |
| [ 1.183354] ata4: SATA max UDMA/133 cmd 0x2868 ctl 0x2884 bmdma 0x2848 irq 22 |
| [ 1.183628] pata_amd 0000:00:06.0: version 0.4.1 |
| [ 1.183683] pata_amd 0000:00:06.0: setting latency timer to 64 |
| [ 1.184304] scsi4 : pata_amd |
| [ 1.184465] scsi5 : pata_amd |
| [ 1.184538] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x2820 irq 14 |
| [ 1.184541] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x2828 irq 15 |
| [ 1.432013] Refined TSC clocksource calibration: 2010.302 MHz. |
| [ 1.432019] Switching to clocksource tsc |
| [ 1.492009] ata1: SATA link down (SStatus 0 SControl 300) |
| [ 1.652014] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) |
| [ 1.660524] ata3.00: ATA-8: SanDisk SDSSDH2256G, X211200, max UDMA/133 |
| [ 1.660528] ata3.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 0/32) |
| [ 1.668497] ata3.00: configured for UDMA/133 |
| [ 1.804008] ata2: SATA link down (SStatus 0 SControl 300) |
| [ 1.804154] scsi 2:0:0:0: Direct-Access ATA SanDisk SDSSDH22 X211 PQ: 0 ANSI: 5 |
| [ 2.116009] ata4: SATA link down (SStatus 0 SControl 300) |
| [ 2.292270] sd 2:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB) |
| [ 2.292338] sd 2:0:0:0: [sda] Write Protect is off |
| [ 2.292342] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 |
| [ 2.292364] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 2.297762] sda: sda1 sda2 sda3 < sda5 sda6 sda7 > |
| [ 2.298417] sd 2:0:0:0: [sda] Attached SCSI disk |
| [ 2.301177] sd 2:0:0:0: Attached scsi generic sg0 type 0 |
| [ 2.433850] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) |
| [ 2.745789] udevd[289]: starting version 175 |
| [ 2.909929] i2c i2c-0: nForce2 SMBus adapter at 0x2480 |
| [ 2.909960] i2c i2c-1: nForce2 SMBus adapter at 0x24c0 |
| [ 2.924257] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 |
| [ 2.924265] ACPI: Power Button [PWRF] |
| [ 2.957552] udevd[332]: renamed network interface eth0 to eth1 |
| [ 3.024783] parport_pc 00:03: reported by Plug and Play ACPI |
| [ 3.024809] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] |
| [ 3.064899] ACPI: PCI Interrupt Link [LAUD] enabled at IRQ 23 |
| [ 3.064928] snd_intel8x0 0000:00:04.0: setting latency timer to 64 |
| [ 3.085525] input: PC Speaker as /devices/platform/pcspkr/input/input1 |
| [ 3.091137] EDAC MC: Ver: 2.1.0 |
| [ 3.101078] MCE: In-kernel MCE decoding enabled. |
| [ 3.108606] AMD64 EDAC driver v3.4.0 |
| [ 3.124452] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3200+ (1 cpu cores) (version 2.20.00) |
| [ 3.124738] [Firmware Bug]: powernow-k8: No PSB or ACPI _PSS objects |
| [ 3.124745] powernow-k8: Make sure that your BIOS is up to date and Cool'N'Quiet support is enabled in BIOS setup |
| [ 3.388010] intel8x0_measure_ac97_clock: measured 54637 usecs (2680 samples) |
| [ 3.388015] intel8x0: clocking to 46971 |
| [ 3.393766] EDAC amd64: DRAM ECC disabled. |
| [ 3.393773] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. |
| [ 3.393775] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. |
| [ 3.393777] (Note that use of the override may cause unknown side effects.) |
| [ 3.875714] EXT4-fs (sda6): re-mounted. Opts: (null) |
| [ 3.938235] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro |
| [ 4.022911] loop: module loaded |
| [ 4.747021] FAT-fs (sda5): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! |
| [ 5.246673] RPC: Registered named UNIX socket transport module. |
| [ 5.246678] RPC: Registered udp transport module. |
| [ 5.246680] RPC: Registered tcp transport module. |
| [ 5.246683] RPC: Registered tcp NFSv4.1 backchannel transport module. |
| [ 5.255496] FS-Cache: Loaded |
| [ 5.276851] FS-Cache: Netfs 'nfs' registered for caching |
| [ 5.287226] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). |
| [ 6.781838] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input2 |
| [ 6.986786] Bluetooth: Core ver 2.16 |
| [ 6.986828] NET: Registered protocol family 31 |
| [ 6.986831] Bluetooth: HCI device and connection manager initialized |
| [ 6.986835] Bluetooth: HCI socket layer initialized |
| [ 6.986837] Bluetooth: L2CAP socket layer initialized |
| [ 6.987199] Bluetooth: SCO socket layer initialized |
| [ 6.997466] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 |
| [ 6.997471] Bluetooth: BNEP filters: protocol multicast |
| [ 7.132807] lp0: using parport0 (interrupt-driven). |
| [ 7.136485] ppdev: user-space parallel port driver |
| [ 16.992010] eth1: no IPv6 routers present |