| |
| |
| coreboot-4.4-1882-g5b6bdcc Mon Oct 17 13:09:42 UTC 2016 romstage starting... |
| Disabling Watchdog reboot... done. |
| SMBus controller enabled. |
| Setting up static northbridge registers... done. |
| Initializing Graphics... |
| Back from haswell_early_initialization() |
| CPU id(40651) ucode:0000001c Intel(R) Celeron(R) 2955U @ 1.40GHz |
| AES NOT supported, TXT NOT supported, VT supported |
| PCH type: LP Mainstream, device id: 9c45, rev id 4 |
| SPD index 1 |
| CBFS: 'Master Header Locator' located CBFS at [400100:7fffc0) |
| CBFS: Locating 'spd.bin' |
| CBFS: Found @ offset db00 size 700 |
| Starting UEFI PEI System Agent |
| CBFS: 'Master Header Locator' located CBFS at [400100:7fffc0) |
| CBFS: Locating 'mrc.cache' |
| CBFS: Found @ offset fec0 size 10000 |
| find_current_mrc_cache_local: picked entry 0 from cache block |
| prepare_mrc_cache: at ffc10010, size fe0 checksum a5ef |
| CBFS: 'Master Header Locator' located CBFS at [400100:7fffc0) |
| CBFS: Locating 'mrc.bin' |
| CBFS: Found @ offset 39fec0 size 2e6e4 |
| System Agent: Starting up... |
| System Agent: Initializing PCH |
| install_ppi: overwrite GUID {ed097352-9041-445a-80b6-b29d509e8845} |
| install_ppi: overwrite GUID {908c7f8b-5c48-47fb-8357-f5fd4e235276} |
| System Agent: Initializing PCH (SMBUS) |
| System Agent: Initializing PCH (USB) |
| System Agent: Initializing PCH (SA Init) |
| System Agent: Initializing PCH (Me UMA) |
| System Agent: Initializing Memory |
| Copy SPD for Channel 0 Dimm 0 |
| Copy SPD for Channel 1 Dimm 0 |
| System Agent: Done. |
| Sanity checking heap. |
| System Agent Version 1.6.1 Build 2 |
| memcfg DDR3 clock 1600 MHz |
| memcfg channel assignment: A: 0, B 1, C 2 |
| memcfg channel[0] config (00780008): |
| ECC inactive |
| enhanced interleave mode on |
| rank interleave on |
| DIMMA 2048 MB width x16 single rank, selected |
| DIMMB 0 MB width x16 single rank |
| memcfg channel[1] config (00780008): |
| ECC inactive |
| enhanced interleave mode on |
| rank interleave on |
| DIMMA 2048 MB width x16 single rank, selected |
| DIMMB 0 MB width x16 single rank |
| ME: FW Partition Table : OK |
| ME: Bringup Loader Failure : NO |
| ME: Firmware Init Complete : NO |
| ME: Manufacturing Mode : NO |
| ME: Boot Options Present : NO |
| ME: Update In Progress : NO |
| ME: Current Working State : Normal |
| ME: Current Operation State : M0 with UMA |
| ME: Current Operation Mode : Normal |
| ME: Error Code : No Error |
| ME: Progress Phase : BUP Phase |
| ME: Power Management Event : Clean Moff->Mx wake |
| ME: Progress Phase State : M0 kernel load |
| CBMEM: |
| IMD: root @ 7f7ff000 254 entries. |
| IMD: root @ 7f7fec00 62 entries. |
| Relocate MRC DATA from ff7d0304 to 7f7dd000 (4064 bytes) |
| CBFS: 'Master Header Locator' located CBFS at [400100:7fffc0) |
| CBFS: Locating 'fallback/ramstage' |
| CBFS: Found @ offset 2a380 size 15f23 |
| Decompressing stage fallback/ramstage @ 0x7f798fc0 (256720 bytes) |
| Loading module at 7f799000 with entry 7f799000. filesize: 0x2db90 memsize: 0x3ea90 |
| Processing 3128 relocs. Offset value of 0x7f699000 |
| SeaBIOS (version rel-1.9.3-0-ge2fc41e) |
| BUILD: gcc: (coreboot toolchain v1.43 August 31st, 2016) 5.3.0 binutils: (GNU Binutils) 2.26.1 |
| Found coreboot cbmem console @ 7f7de000 |
| Found mainboard GOOGLE Peppy |
| Relocating init from 0x000e5480 to 0x7f6bfbc0 (size 45984) |
| Found CBFS header at 0xffc00138 |
| multiboot: eax=7f7c6200, ebx=7f7c61b4 |
| Found 15 PCI devices (max PCI bus is 01) |
| Copying SMBIOS entry point from 0x7f70b000 to 0x000f0800 |
| Copying ACPI RSDP from 0x7f71c000 to 0x000f07d0 |
| Using pmtimer, ioport 0x1008 |
| Scan for VGA option rom |
| Running option rom at c000:0003 |
| pmm call arg1=0 |
| Turning on vga text mode console |
| SeaBIOS (version rel-1.9.3-0-ge2fc41e) |
| XHCI init on dev 00:14.0: regs @ 0xe0500000, 13 ports, 32 slots, 32 byte contexts |
| XHCI protocol USB 2.00, 8 ports (offset 1), def 3018 |
| XHCI protocol USB 3.00, 4 ports (offset 10), def 1000 |
| XHCI extcap 0xc1 @ e0508040 |
| XHCI extcap 0xc0 @ e0508070 |
| XHCI extcap 0x1 @ e0508460 |
| XHCI extcap 0xa @ e0508480 |
| EHCI init on dev 00:1d.0 (regs=0xe0520020) |
| Found 0 lpt ports |
| Found 0 serial ports |
| AHCI controller at 1f.2, iobase e051f000, irq 10 |
| Searching bootorder for: /rom@img/memtest |
| Searching bootorder for: /rom@img/nvramcui |
| Searching bootorder for: /rom@img/coreinfo |
| Searching bootorder for: /pci@i0cf8/*@1f,2/drive@0/disk@0 |
| AHCI/0: registering: "AHCI/0: KINGSTON SNS4151S332G ATA-10 Hard-Disk (30533 MiBytes)" |
| PS2 keyboard initialized |
| XHCI no devices found |
| Initialized USB HUB (0 ports used) |
| All threads complete. |
| Scan for option roms |
| |
| Press ESC for boot menu. |
| |
| Select boot device: |
| |
| 1. AHCI/0: KINGSTON SNS4151S332G ATA-10 Hard-Disk (30533 MiByt |
| 2. Payload [memtest] |
| 3. Payload [nvramcui] |
| 4. Payload [coreinfo] |
| |
| Searching bootorder for: HALT |
| drive 0x000f0760: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 s=62533296 |
| Space available for UMB: c7800-ec800, f0000-f0760 |
| Returned 188416 bytes of ZoneHigh |
| e820 map has 9 items: |
| 0: 0000000000000000 - 000000000009fc00 = 1 RAM |
| 1: 000000000009fc00 - 00000000000a0000 = 2 RESERVED |
| 2: 00000000000f0000 - 0000000000100000 = 2 RESERVED |
| 3: 0000000000100000 - 000000007f6f9000 = 1 RAM |
| 4: 000000007f6f9000 - 0000000082200000 = 2 RESERVED |
| 5: 00000000f0000000 - 00000000f4000000 = 2 RESERVED |
| 6: 00000000fed10000 - 00000000fed1a000 = 2 RESERVED |
| 7: 00000000fed84000 - 00000000fed85000 = 2 RESERVED |
| 8: 0000000100000000 - 000000017ce00000 = 1 RAM |
| enter handle_19: |
| NULL |
| Booting from Hard Disk... |
| Booting from 0000:7c00 |
| |