| [ 0.000000] Initializing cgroup subsys cpuset |
| [ 0.000000] Initializing cgroup subsys cpu |
| [ 0.000000] Initializing cgroup subsys cpuacct |
| [ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt9-2 (2015-04-13) |
| [ 0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt-x86_64 rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt-x86_64 |
| [ 0.000000] e820: BIOS-provided physical RAM map: |
| [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff99fff] usable |
| [ 0.000000] BIOS-e820: [mem 0x00000000bff9a000-0x00000000cfffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable |
| [ 0.000000] NX (Execute Disable) protection: active |
| [ 0.000000] SMBIOS 2.7 present. |
| [ 0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS RAPTOR-NORMAL 12/11/2016 |
| [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable |
| [ 0.000000] AGP: No AGP bridge found |
| [ 0.000000] e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000 |
| [ 0.000000] MTRR default type: uncachable |
| [ 0.000000] MTRR fixed ranges enabled: |
| [ 0.000000] 00000-9FFFF write-back |
| [ 0.000000] A0000-BFFFF uncachable |
| [ 0.000000] C0000-FFFFF write-back |
| [ 0.000000] MTRR variable ranges enabled: |
| [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back |
| [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back |
| [ 0.000000] 2 base 0000F8000000 mask FFFFFC000000 write-combining |
| [ 0.000000] 3 disabled |
| [ 0.000000] 4 disabled |
| [ 0.000000] 5 disabled |
| [ 0.000000] 6 disabled |
| [ 0.000000] 7 disabled |
| [ 0.000000] TOM2: 0000000180000000 aka 6144M |
| [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 |
| [ 0.000000] e820: last_pfn = 0xbff9a max_arch_pfn = 0x400000000 |
| [ 0.000000] found SMP MP-table at [mem 0x000f0640-0x000f064f] mapped at [ffff8800000f0640] |
| [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 |
| [ 0.000000] Using GB pages for direct mapping |
| [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] |
| [ 0.000000] [mem 0x00000000-0x000fffff] page 4k |
| [ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE |
| [ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE |
| [ 0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE |
| [ 0.000000] init_memory_mapping: [mem 0x17fe00000-0x17fffffff] |
| [ 0.000000] [mem 0x17fe00000-0x17fffffff] page 1G |
| [ 0.000000] init_memory_mapping: [mem 0x17c000000-0x17fdfffff] |
| [ 0.000000] [mem 0x17c000000-0x17fdfffff] page 1G |
| [ 0.000000] init_memory_mapping: [mem 0x100000000-0x17bffffff] |
| [ 0.000000] [mem 0x100000000-0x17bffffff] page 1G |
| [ 0.000000] init_memory_mapping: [mem 0x00100000-0xbff99fff] |
| [ 0.000000] [mem 0x00100000-0x001fffff] page 4k |
| [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M |
| [ 0.000000] [mem 0x40000000-0x7fffffff] page 1G |
| [ 0.000000] [mem 0x80000000-0xbfdfffff] page 2M |
| [ 0.000000] [mem 0xbfe00000-0xbff99fff] page 4k |
| [ 0.000000] RAMDISK: [mem 0x7f24c000-0x7fffefff] |
| [ 0.000000] ACPI: Early table checksum verification disabled |
| [ 0.000000] ACPI: RSDP 0x00000000000F0810 000024 (v02 CORE ) |
| [ 0.000000] ACPI: XSDT 0x00000000BFFAB0E0 00006C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: FACP 0x00000000BFFAD8D0 000074 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: DSDT 0x00000000BFFAB280 002644 (v02 ASUS COREBOOT 00000001 INTL 20150619) |
| [ 0.000000] ACPI: FACS 0x00000000BFFAB240 000040 |
| [ 0.000000] ACPI: SSDT 0x00000000BFFAD9D0 000EEA (v02 CORE COREBOOT 0000002A CORE 0000002A) |
| [ 0.000000] ACPI: TCPA 0x00000000BFFAE8C0 000032 (v02 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: APIC 0x00000000BFFAE900 0000C6 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SRAT 0x00000000BFFAE9D0 000150 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SLIT 0x00000000BFFAEB20 000030 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: HPET 0x00000000BFFAEB50 000038 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SRAT 0x00000000BFFAEB90 000150 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SLIT 0x00000000BFFAECE0 000030 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0 |
| [ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0 |
| [ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0 |
| [ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0 |
| [ 0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1 |
| [ 0.000000] SRAT: PXM 1 -> APIC 0x05 -> Node 1 |
| [ 0.000000] SRAT: PXM 1 -> APIC 0x06 -> Node 1 |
| [ 0.000000] SRAT: PXM 1 -> APIC 0x07 -> Node 1 |
| [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff] |
| [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff] |
| [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x13fffffff] |
| [ 0.000000] SRAT: Node 1 PXM 1 [mem 0x140000000-0x17fffffff] |
| [ 0.000000] NUMA: Initialized distance table, cnt=2 |
| [ 0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xbfffffff] -> [mem 0x00000000-0xbfffffff] |
| [ 0.000000] NUMA: Node 0 [mem 0x00000000-0xbfffffff] + [mem 0x100000000-0x13fffffff] -> [mem 0x00000000-0x13fffffff] |
| [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff] |
| [ 0.000000] NODE_DATA [mem 0x13fffb000-0x13fffffff] |
| [ 0.000000] Initmem setup node 1 [mem 0x140000000-0x17fffffff] |
| [ 0.000000] NODE_DATA [mem 0x17fff8000-0x17fffcfff] |
| [ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013be00000-ffff88013f5fffff] on node 0 |
| [ 0.000000] [ffffea0004600000-ffffea00053fffff] PMD -> [ffff88017e600000-ffff88017f3fffff] on node 1 |
| [ 0.000000] Zone ranges: |
| [ 0.000000] DMA [mem 0x00001000-0x00ffffff] |
| [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] |
| [ 0.000000] Normal [mem 0x100000000-0x17fffffff] |
| [ 0.000000] Movable zone start for each node |
| [ 0.000000] Early memory node ranges |
| [ 0.000000] node 0: [mem 0x00001000-0x0009efff] |
| [ 0.000000] node 0: [mem 0x00100000-0xbff99fff] |
| [ 0.000000] node 0: [mem 0x100000000-0x13fffffff] |
| [ 0.000000] node 1: [mem 0x140000000-0x17fffffff] |
| [ 0.000000] On node 0 totalpages: 1048376 |
| [ 0.000000] DMA zone: 56 pages used for memmap |
| [ 0.000000] DMA zone: 21 pages reserved |
| [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 |
| [ 0.000000] DMA32 zone: 10695 pages used for memmap |
| [ 0.000000] DMA32 zone: 782234 pages, LIFO batch:31 |
| [ 0.000000] Normal zone: 3584 pages used for memmap |
| [ 0.000000] Normal zone: 262144 pages, LIFO batch:31 |
| [ 0.000000] On node 1 totalpages: 262144 |
| [ 0.000000] Normal zone: 3584 pages used for memmap |
| [ 0.000000] Normal zone: 262144 pages, LIFO batch:31 |
| [ 0.000000] ACPI: PM-Timer IO Port: 0x2008 |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) |
| [ 0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0]) |
| [ 0.000000] IOAPIC[0]: apic_id 24, version 17, address 0xfec00000, GSI 0-23 |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) |
| [ 0.000000] ACPI: IRQ9 used by override. |
| [ 0.000000] ACPI: IRQ14 used by override. |
| [ 0.000000] ACPI: IRQ15 used by override. |
| [ 0.000000] Using ACPI (MADT) for SMP configuration information |
| [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 |
| [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs |
| [ 0.000000] nr_irqs_gsi: 40 |
| [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xbff9a000-0xcfffffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xffffffff] |
| [ 0.000000] e820: [mem 0xd0000000-0xffffffff] available for PCI devices |
| [ 0.000000] Booting paravirtualized kernel on bare hardware |
| [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:2 |
| [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s80896 r8192 d21504 u524288 |
| [ 0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152 |
| [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [1] 4 5 6 7 |
| [ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 1292580 |
| [ 0.000000] Policy zone: Normal |
| [ 0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt-x86_64 rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt-x86_64 |
| [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) |
| [ 0.000000] AGP: Checking aperture... |
| [ 0.000000] AGP: No AGP bridge found |
| [ 0.000000] AGP: Node 0: aperture [bus addr 0xe5ea000000-0xe5ebffffff] (32MB) |
| [ 0.000000] Aperture beyond 4GB. Ignoring. |
| [ 0.000000] AGP: Your BIOS doesn't leave a aperture memory hole |
| [ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup |
| [ 0.000000] AGP: This costs you 64MB of RAM |
| [ 0.000000] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB) |
| [ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff] |
| [ 0.000000] Memory: 5012208K/5242080K available (5207K kernel code, 946K rwdata, 1832K rodata, 1204K init, 840K bss, 229872K reserved) |
| [ 0.000000] Hierarchical RCU implementation. |
| [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. |
| [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8. |
| [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 |
| [ 0.000000] NR_IRQS:33024 nr_irqs:744 16 |
| [ 0.000000] spurious 8259A interrupt: IRQ7. |
| [ 0.000000] Console: colour *CGA 80x25 |
| [ 0.000000] console [ttyS0] enabled |
| [ 0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl |
| [ 0.000000] hpet clockevent registered |
| [ 0.000000] tsc: Fast TSC calibration using PIT |
| [ 0.000000] tsc: Detected 1909.767 MHz processor |
| [ 0.000157] Calibrating delay loop (skipped), value calculated using timer frequency.. 3819.53 BogoMIPS (lpj=7639068) |
| [ 0.010795] pid_max: default: 32768 minimum: 301 |
| [ 0.015441] ACPI: Core revision 20140424 |
| [ 0.021832] ACPI: All ACPI Tables successfully acquired |
| [ 0.027186] Security Framework initialized |
| [ 0.031313] AppArmor: AppArmor disabled by boot time parameter |
| [ 0.037159] Yama: disabled by default; enable with sysctl kernel.yama.* |
| [ 0.044887] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) |
| [ 0.058040] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) |
| [ 0.067805] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) |
| [ 0.074704] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) |
| [ 0.082561] Initializing cgroup subsys memory |
| [ 0.086951] Initializing cgroup subsys devices |
| [ 0.091412] Initializing cgroup subsys freezer |
| [ 0.095876] Initializing cgroup subsys net_cls |
| [ 0.100332] Initializing cgroup subsys blkio |
| [ 0.104628] Initializing cgroup subsys perf_event |
| [ 0.109345] Initializing cgroup subsys net_prio |
| [ 0.113933] tseg: 0000000000 |
| [ 0.113944] CPU: Physical Processor ID: 0 |
| [ 0.117973] CPU: Processor Core ID: 0 |
| [ 0.121646] mce: CPU supports 6 MCE banks |
| [ 0.125682] LVT offset 0 assigned for vector 0xf9 |
| [ 0.130402] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8 |
| Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0 |
| tlb_flushall_shift: 6 |
| [ 0.145752] Freeing SMP alternatives memory: 20K (ffffffff81a1b000 - ffffffff81a20000) |
| [ 0.154762] ftrace: allocating 21614 entries in 85 pages |
| [ 0.170075] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0 |
| [ 0.215596] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 8347 (fam: 10, model: 02, stepping: 01) |
| [ 0.332519] Performance Events: AMD PMU driver. |
| [ 0.337090] ... version: 0 |
| [ 0.341102] ... bit width: 48 |
| [ 0.345200] ... generic registers: 4 |
| [ 0.349211] ... value mask: 0000ffffffffffff |
| [ 0.354512] ... max period: 00007fffffffffff |
| [ 0.359840] ... fixed-purpose events: 0 |
| [ 0.363862] ... event mask: 000000000000000f |
| [ 0.371711] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. |
| [ 0.379919] x86: Booting SMP configuration: |
| [ 0.384113] .... node #0, CPUs: #1 #2 #3 |
| [ 0.428495] .... node #1, CPUs: #4 #5 #6 #7 |
| [ 0.581248] x86: Booted up 2 nodes, 8 CPUs |
| [ 0.585550] smpboot: Total of 8 processors activated (30557.37 BogoMIPS) |
| [ 0.598074] devtmpfs: initialized |
| [ 0.609392] pinctrl core: initialized pinctrl subsystem |
| [ 0.614791] NET: Registered protocol family 16 |
| [ 0.619454] cpuidle: using governor ladder |
| [ 0.623560] cpuidle: using governor menu |
| [ 0.627496] node 0 link 1: io port [1000, 3fff] |
| [ 0.627499] TOM: 00000000c0000000 aka 3072M |
| [ 0.631692] Fam 10h mmconf [mem 0xc0000000-0xcfffffff] |
| [ 0.631695] node 0 link 1: mmio [fc000000, fc3fffff] |
| [ 0.631699] node 0 link 1: mmio [f8000000, fbffffff] |
| [ 0.631701] TOM2: 0000000180000000 aka 6144M |
| [ 0.635981] bus: [bus 00-05] on node 0 link 1 |
| [ 0.635983] bus: 00 [io 0x0000-0xffff] |
| [ 0.635984] bus: 00 [mem 0xd0000000-0xffffffff] |
| [ 0.635986] bus: 00 [mem 0x180000000-0xfcffffffff] |
| [ 0.636095] ACPI: bus type PCI registered |
| [ 0.640114] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 |
| [ 0.646730] PCI: Using configuration type 1 for base access |
| [ 0.652301] PCI: Using configuration type 1 for extended access |
| [ 0.669338] ACPI: Added _OSI(Module Device) |
| [ 0.673533] ACPI: Added _OSI(Processor Device) |
| [ 0.677983] ACPI: Added _OSI(3.0 _SCP Extensions) |
| [ 0.682695] ACPI: Added _OSI(Processor Aggregator Device) |
| [ 0.691677] ACPI: Interpreter enabled |
| [ 0.695358] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580) |
| [ 0.704630] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580) |
| [ 0.713894] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580) |
| [ 0.723167] ACPI: (supports S0 S1 S5) |
| [ 0.726834] ACPI: Using IOAPIC for interrupt routing |
| [ 0.731846] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| [ 0.760780] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05]) |
| [ 0.766973] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] |
| [ 0.775184] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] |
| [ 0.814573] acpi PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x03b0-0x03df] ignored |
| [ 0.824601] PCI host bridge to bus 0000:00 |
| [ 0.828705] pci_bus 0000:00: root bus resource [bus 00-05] |
| [ 0.834196] pci_bus 0000:00: root bus resource [io 0x0d00-0x3fff] |
| [ 0.840374] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] |
| [ 0.847251] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff] |
| [ 0.854123] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc3fffff] |
| [ 0.861003] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] |
| [ 0.867200] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000 |
| [ 0.867392] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100 |
| [ 0.867399] pci 0000:00:01.0: reg 0x10: [io 0x2c00-0x2c7f] |
| [ 0.867530] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500 |
| [ 0.867538] pci 0000:00:01.1: reg 0x10: [io 0x3000-0x301f] |
| [ 0.867564] pci 0000:00:01.1: reg 0x20: [io 0x2c80-0x2cbf] |
| [ 0.867584] pci 0000:00:01.1: reg 0x24: [io 0x2cc0-0x2cff] |
| [ 0.867618] pci 0000:00:01.1: PME# supported from D3hot D3cold |
| [ 0.867724] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310 |
| [ 0.867732] pci 0000:00:02.0: reg 0x10: [mem 0xfc300000-0xfc300fff] |
| [ 0.867780] pci 0000:00:02.0: supports D1 D2 |
| [ 0.867790] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.867841] pci 0000:00:02.0: System wakeup disabled by ACPI |
| [ 0.873563] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320 |
| [ 0.873579] pci 0000:00:02.1: reg 0x10: [mem 0xfc303000-0xfc3030ff] |
| [ 0.873635] pci 0000:00:02.1: supports D1 D2 |
| [ 0.873637] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.873683] pci 0000:00:02.1: System wakeup disabled by ACPI |
| [ 0.879406] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a |
| [ 0.879432] pci 0000:00:06.0: reg 0x20: [io 0x3020-0x302f] |
| [ 0.879457] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] |
| [ 0.886596] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io 0x03f6] |
| [ 0.893127] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] |
| [ 0.900265] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io 0x0376] |
| [ 0.906949] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185 |
| [ 0.906960] pci 0000:00:07.0: reg 0x10: [io 0x3050-0x3057] |
| [ 0.906965] pci 0000:00:07.0: reg 0x14: [io 0x3070-0x3073] |
| [ 0.906970] pci 0000:00:07.0: reg 0x18: [io 0x3058-0x305f] |
| [ 0.906975] pci 0000:00:07.0: reg 0x1c: [io 0x3074-0x3077] |
| [ 0.906979] pci 0000:00:07.0: reg 0x20: [io 0x3030-0x303f] |
| [ 0.906984] pci 0000:00:07.0: reg 0x24: [mem 0xfc301000-0xfc301fff] |
| [ 0.907159] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185 |
| [ 0.907167] pci 0000:00:08.0: reg 0x10: [io 0x3060-0x3067] |
| [ 0.907171] pci 0000:00:08.0: reg 0x14: [io 0x3078-0x307b] |
| [ 0.907176] pci 0000:00:08.0: reg 0x18: [io 0x3068-0x306f] |
| [ 0.907181] pci 0000:00:08.0: reg 0x1c: [io 0x307c-0x307f] |
| [ 0.907185] pci 0000:00:08.0: reg 0x20: [io 0x3040-0x304f] |
| [ 0.907190] pci 0000:00:08.0: reg 0x24: [mem 0xfc302000-0xfc302fff] |
| [ 0.907305] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400 |
| [ 0.907384] pci 0000:00:09.0: System wakeup disabled by ACPI |
| [ 0.913106] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400 |
| [ 0.913158] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.913203] pci 0000:00:0b.0: System wakeup disabled by ACPI |
| [ 0.918928] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400 |
| [ 0.918983] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.919029] pci 0000:00:0c.0: System wakeup disabled by ACPI |
| [ 0.924751] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400 |
| [ 0.924815] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.924870] pci 0000:00:0d.0: System wakeup disabled by ACPI |
| [ 0.930599] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400 |
| [ 0.930650] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.930744] pci 0000:00:0e.0: System wakeup disabled by ACPI |
| [ 0.936486] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000 |
| [ 0.936620] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000 |
| [ 0.936781] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000 |
| [ 0.936897] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000 |
| [ 0.936999] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000 |
| [ 0.937117] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000 |
| [ 0.937247] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000 |
| [ 0.937398] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000 |
| [ 0.937513] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000 |
| [ 0.937631] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000 |
| [ 0.937867] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000 |
| [ 0.937893] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref] |
| [ 0.937906] pci 0000:01:04.0: reg 0x14: [mem 0xfc000000-0xfc03ffff] |
| [ 0.937916] pci 0000:01:04.0: reg 0x18: [io 0x1000-0x107f] |
| [ 0.937961] pci 0000:01:04.0: supports D1 D2 |
| [ 0.938082] pci 0000:00:09.0: PCI bridge to [bus 01] |
| [ 0.943067] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff] |
| [ 0.943070] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff] |
| [ 0.943073] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref] |
| [ 0.943183] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000 |
| [ 0.943245] pci 0000:02:00.0: reg 0x10: [mem 0xfc100000-0xfc10ffff 64bit] |
| [ 0.943289] pci 0000:02:00.0: reg 0x30: [mem 0x68400000-0x6840ffff pref] |
| [ 0.943393] pci 0000:02:00.0: PME# supported from D3hot D3cold |
| [ 0.943476] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' |
| [ 0.953476] pci 0000:00:0b.0: PCI bridge to [bus 02] |
| [ 0.958443] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff] |
| [ 0.958544] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000 |
| [ 0.958581] pci 0000:03:00.0: reg 0x10: [mem 0xfc200000-0xfc20ffff 64bit] |
| [ 0.958684] pci 0000:03:00.0: PME# supported from D3hot D3cold |
| [ 0.958777] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' |
| [ 0.968775] pci 0000:00:0c.0: PCI bridge to [bus 03] |
| [ 0.973744] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff] |
| [ 0.973815] pci 0000:00:0d.0: PCI bridge to [bus 04] |
| [ 0.978859] pci 0000:00:0e.0: PCI bridge to [bus 05] |
| [ 0.983843] pci_bus 0000:00: on NUMA node 0 |
| [ 0.983943] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19) |
| [ 0.990073] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19) |
| [ 0.996213] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled. |
| [ 1.003513] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled. |
| [ 1.010815] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled. |
| [ 1.018131] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.025419] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23) |
| [ 1.031532] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23) |
| [ 1.037673] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.044964] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.052272] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.059560] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23) |
| [ 1.065698] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23) |
| [ 1.071842] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.079136] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.086440] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.093741] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. |
| [ 1.102262] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled. |
| [ 1.108719] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled. |
| [ 1.115173] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled. |
| [ 1.121634] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled. |
| [ 1.128395] ACPI: Enabled 1 GPEs in block 00 to 1F |
| [ 1.133516] vgaarb: setting as boot device: PCI:0000:01:04.0 |
| [ 1.139183] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none |
| [ 1.147279] vgaarb: loaded |
| [ 1.149994] vgaarb: bridge control possible 0000:01:04.0 |
| [ 1.155468] PCI: Using ACPI for IRQ routing |
| [ 1.159660] PCI: pci_cache_line_size set to 64 bytes |
| [ 1.159716] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] |
| [ 1.159720] e820: reserve RAM buffer [mem 0xbff9a000-0xbfffffff] |
| [ 1.160034] HPET: 3 timers in total, 0 timers will be used for per-cpu timer |
| [ 1.167085] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 |
| [ 1.172147] hpet0: 3 comparators, 32-bit 25.000000 MHz counter |
| [ 1.180838] Switched to clocksource hpet |
| [ 1.196623] pnp: PnP ACPI init |
| [ 1.199732] ACPI: bus type PNP registered |
| [ 1.204265] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) |
| [ 1.204351] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active) |
| [ 1.204433] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active) |
| [ 1.204532] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active) |
| [ 1.204570] pnp 00:04: [dma 2] |
| [ 1.204617] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active) |
| [ 1.204648] pnp: PnP ACPI: found 5 devices |
| [ 1.208757] ACPI: bus type PNP unregistered |
| [ 1.220786] pci 0000:02:00.0: can't claim BAR 6 [mem 0x68400000-0x6840ffff pref]: no compatible bridge window |
| [ 1.230742] pci 0000:00:09.0: PCI bridge to [bus 01] |
| [ 1.235718] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff] |
| [ 1.241826] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff] |
| [ 1.248618] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref] |
| [ 1.255854] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc110000-0xfc11ffff pref] |
| [ 1.263078] pci 0000:00:0b.0: PCI bridge to [bus 02] |
| [ 1.268049] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff] |
| [ 1.274846] pci 0000:00:0c.0: PCI bridge to [bus 03] |
| [ 1.279818] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff] |
| [ 1.286611] pci 0000:00:0d.0: PCI bridge to [bus 04] |
| [ 1.291586] pci 0000:00:0e.0: PCI bridge to [bus 05] |
| [ 1.296568] pci_bus 0000:00: resource 4 [io 0x0d00-0x3fff] |
| [ 1.296571] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff] |
| [ 1.296573] pci_bus 0000:00: resource 6 [mem 0xf8000000-0xfbffffff] |
| [ 1.296576] pci_bus 0000:00: resource 7 [mem 0xfc000000-0xfc3fffff] |
| [ 1.296578] pci_bus 0000:00: resource 8 [io 0x0000-0x0cf7] |
| [ 1.296581] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] |
| [ 1.296584] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff] |
| [ 1.296587] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref] |
| [ 1.296589] pci_bus 0000:02: resource 1 [mem 0xfc100000-0xfc1fffff] |
| [ 1.296592] pci_bus 0000:03: resource 1 [mem 0xfc200000-0xfc2fffff] |
| [ 1.296744] NET: Registered protocol family 2 |
| [ 1.301617] TCP established hash table entries: 65536 (order: 7, 524288 bytes) |
| [ 1.309288] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) |
| [ 1.316624] TCP: Hash tables configured (established 65536 bind 65536) |
| [ 1.323244] TCP: reno registered |
| [ 1.326509] UDP hash table entries: 4096 (order: 5, 131072 bytes) |
| [ 1.332715] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) |
| [ 1.339513] NET: Registered protocol family 1 |
| [ 1.344262] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23 |
| [ 1.350338] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22 |
| [ 1.356252] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.361783] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.367295] pci 0000:00:0b.0: Found disabled HT MSI Mapping |
| [ 1.372877] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.378425] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.383934] pci 0000:00:0c.0: Found disabled HT MSI Mapping |
| [ 1.389520] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.395066] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.400576] pci 0000:00:0d.0: Found disabled HT MSI Mapping |
| [ 1.406169] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.411713] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.417225] pci 0000:00:0e.0: Found disabled HT MSI Mapping |
| [ 1.422805] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.428324] pci 0000:01:04.0: Video device with shadowed ROM |
| [ 1.428333] PCI: CLS 64 bytes, default 64 |
| [ 1.428448] Unpacking initramfs... |
| [ 1.811969] Freeing initrd memory: 14028K (ffff88007f24c000 - ffff88007ffff000) |
| [ 1.819937] PCI-DMA: Disabling AGP. |
| [ 1.823613] PCI-DMA: aperture base @ b4000000 size 65536 KB |
| [ 1.829201] PCI-DMA: using GART IOMMU. |
| [ 1.832969] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture |
| [ 1.845001] platform rtc_cmos: registered platform RTC device (no PNP device found) |
| [ 1.853161] microcode: CPU0: patch_level=0x01000084 |
| [ 1.858049] microcode: CPU1: patch_level=0x01000084 |
| [ 1.862944] microcode: CPU2: patch_level=0x01000084 |
| [ 1.867846] microcode: CPU3: patch_level=0x01000084 |
| [ 1.872754] microcode: CPU4: patch_level=0x01000084 |
| [ 1.877649] microcode: CPU5: patch_level=0x01000084 |
| [ 1.882544] microcode: CPU6: patch_level=0x01000084 |
| [ 1.887440] microcode: CPU7: patch_level=0x01000084 |
| [ 1.892435] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba |
| [ 1.901233] LVT offset 1 assigned for vector 0x400 |
| [ 1.906048] IBS: LVT offset 1 assigned |
| [ 1.909843] perf: AMD IBS detected (0x00000007) |
| [ 1.915003] futex hash table entries: 2048 (order: 5, 131072 bytes) |
| [ 1.921390] audit: initializing netlink subsys (disabled) |
| [ 1.926815] audit: type=2000 audit(1481443701.660:1): initialized |
| [ 1.933702] HugeTLB registered 2 MB page size, pre-allocated 0 pages |
| [ 1.940110] zbud: loaded |
| [ 1.943005] VFS: Disk quotas dquot_6.5.2 |
| [ 1.946974] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) |
| [ 1.953514] msgmni has been set to 9945 |
| [ 1.957879] alg: No test for stdrng (krng) |
| [ 1.962036] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) |
| [ 1.969534] io scheduler noop registered |
| [ 1.973466] io scheduler deadline registered |
| [ 1.977815] io scheduler cfq registered (default) |
| [ 1.982737] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X |
| [ 1.982863] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X |
| [ 1.982970] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X |
| [ 1.983081] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X |
| [ 1.983248] aer 0000:00:0b.0:pcie02: service driver aer loaded |
| [ 1.983272] aer 0000:00:0c.0:pcie02: service driver aer loaded |
| [ 1.983295] aer 0000:00:0d.0:pcie02: service driver aer loaded |
| [ 1.983317] aer 0000:00:0e.0:pcie02: service driver aer loaded |
| [ 1.983341] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt |
| [ 1.990310] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt |
| [ 1.996838] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded |
| [ 1.996848] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt |
| [ 2.003811] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt |
| [ 2.010344] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded |
| [ 2.010354] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt |
| [ 2.017319] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded |
| [ 2.017328] pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt |
| [ 2.024297] pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded |
| [ 2.024330] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 |
| [ 2.029938] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 |
| [ 2.036645] GHES: HEST is not enabled! |
| [ 2.040526] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
| [ 2.067134] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A |
| [ 2.094813] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A |
| [ 2.102733] Linux agpgart interface v0.103 |
| [ 2.107055] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12 |
| [ 2.117401] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| [ 2.122455] serio: i8042 AUX port at 0x60,0x64 irq 12 |
| [ 2.127725] mousedev: PS/2 mouse device common for all mice |
| [ 2.133402] rtc_cmos rtc_cmos: RTC can wake from S4 |
| [ 2.138541] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 |
| [ 2.144938] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs |
| [ 2.152795] ledtrig-cpu: registered to indicate activity on CPUs |
| [ 2.158989] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com> |
| [ 2.165432] AMD IOMMUv2 functionality not available on this system |
| [ 2.171763] TCP: cubic registered |
| [ 2.175251] NET: Registered protocol family 10 |
| [ 2.180152] mip6: Mobile IPv6 |
| [ 2.183139] NET: Registered protocol family 17 |
| [ 2.187671] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 |
| [ 2.196324] mpls_gso: MPLS GSO support |
| [ 2.200964] registered taskstats version 1 |
| [ 2.205849] rtc_cmos rtc_cmos: setting system clock to 2016-12-11 08:08:23 UTC (1481443703) |
| [ 2.214272] PM: Hibernation image not present or could not be loaded. |
| [ 2.216066] Freeing unused kernel memory: 1204K (ffffffff818ee000 - ffffffff81a1b000) |
| [ 2.223924] Write protecting the kernel read-only data: 8192k |
| [ 2.233171] Freeing unused kernel memory: 924K (ffff880001519000 - ffff880001600000) |
| [ 2.241760] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000) |
| [ 2.275395] systemd-udevd[99]: starting version 215 |
| [ 2.281127] random: systemd-udevd urandom read with 3 bits of entropy available |
| [ 2.310576] SCSI subsystem initialized |
| [ 2.315034] ACPI: bus type USB registered |
| [ 2.319193] usbcore: registered new interface driver usbfs |
| [ 2.324805] usbcore: registered new interface driver hub |
| [ 2.324920] pps_core: LinuxPPS API ver. 1 registered |
| [ 2.324921] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> |
| [ 2.328541] FDC 0 is a post-1991 82077 |
| [ 2.348882] usbcore: registered new device driver usb |
| [ 2.349155] libata version 3.00 loaded. |
| [ 2.354381] PTP clock support registered |
| [ 2.358710] pata_amd 0000:00:06.0: version 0.4.1 |
| [ 2.359612] scsi0 : pata_amd |
| [ 2.362897] tg3.c:v3.137 (May 11, 2014) |
| [ 2.362996] scsi1 : pata_amd |
| [ 2.363085] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3020 irq 14 |
| [ 2.363087] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3028 irq 15 |
| [ 2.363174] sata_nv 0000:00:07.0: version 3.5 |
| [ 2.363448] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21 |
| [ 2.364025] scsi2 : sata_nv |
| [ 2.364209] scsi3 : sata_nv |
| [ 2.364285] ata3: SATA max UDMA/133 cmd 0x3050 ctl 0x3070 bmdma 0x3030 irq 21 |
| [ 2.364287] ata4: SATA max UDMA/133 cmd 0x3058 ctl 0x3074 bmdma 0x3038 irq 21 |
| [ 2.364496] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20 |
| [ 2.364937] scsi4 : sata_nv |
| [ 2.365102] scsi5 : sata_nv |
| [ 2.365165] ata5: SATA max UDMA/133 cmd 0x3060 ctl 0x3078 bmdma 0x3040 irq 20 |
| [ 2.365168] ata6: SATA max UDMA/133 cmd 0x3068 ctl 0x307c bmdma 0x3048 irq 20 |
| [ 2.434779] tg3 0000:02:00.0: enabling device (0004 -> 0006) |
| [ 2.440654] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| [ 2.440737] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17 |
| [ 2.453774] ehci-pci: EHCI PCI platform driver |
| [ 2.458519] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver |
| [ 2.459014] ehci-pci 0000:00:02.1: EHCI Host Controller |
| [ 2.459029] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1 |
| [ 2.459047] ehci-pci 0000:00:02.1: debug port 1 |
| [ 2.459097] ehci-pci 0000:00:02.1: cache line size of 64 is not supported |
| [ 2.459120] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc303000 |
| [ 2.468418] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00 |
| [ 2.468483] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 |
| [ 2.468485] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.468486] usb usb1: Product: EHCI Host Controller |
| [ 2.468488] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd |
| [ 2.468489] usb usb1: SerialNumber: 0000:00:02.1 |
| [ 2.468772] hub 1-0:1.0: USB hub found |
| [ 2.468782] hub 1-0:1.0: 10 ports detected |
| [ 2.531535] ohci-pci: OHCI PCI platform driver |
| [ 2.536216] ohci-pci 0000:00:02.0: OHCI PCI host controller |
| [ 2.541822] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2 |
| [ 2.549275] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc300000 |
| [ 2.563607] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:61:a2 |
| [ 2.573867] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) |
| [ 2.583602] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] |
| [ 2.591433] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit] |
| [ 2.598245] tg3 0000:03:00.0: enabling device (0004 -> 0006) |
| [ 2.604054] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16 |
| [ 2.610420] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 |
| [ 2.617219] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.624441] usb usb2: Product: OHCI PCI host controller |
| [ 2.629675] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd |
| [ 2.635774] usb usb2: SerialNumber: 0000:00:02.0 |
| [ 2.640609] hub 2-0:1.0: USB hub found |
| [ 2.644372] hub 2-0:1.0: 10 ports detected |
| [ 2.668343] ata3: SATA link down (SStatus 0 SControl 300) |
| [ 2.672351] ata5: SATA link down (SStatus 0 SControl 300) |
| [ 2.692214] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:63:95 |
| [ 2.702480] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) |
| [ 2.712213] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] |
| [ 2.720044] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit] |
| [ 2.844282] tsc: Refined TSC clocksource calibration: 1909.787 MHz |
| [ 3.000230] ata4: SATA link down (SStatus 0 SControl 300) |
| [ 3.316128] ata6: SATA link down (SStatus 0 SControl 300) |
| [ 3.340349] FS-Cache: Loaded |
| [ 3.348286] RPC: Registered named UNIX socket transport module. |
| [ 3.355387] RPC: Registered udp transport module. |
| [ 3.361492] RPC: Registered tcp transport module. |
| [ 3.367559] RPC: Registered tcp NFSv4.1 backchannel transport module. |
| [ 3.381062] FS-Cache: Netfs 'nfs' registered for caching |
| [ 3.398200] tg3 0000:02:00.0: irq 44 for MSI/MSI-X |
| [ 3.444184] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready |
| [ 3.848034] Switched to clocksource tsc |
| [ 6.759473] tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex |
| [ 6.766088] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX |
| [ 6.772983] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready |
| [ 7.594988] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR) |
| [ 7.608996] systemd[1]: Detected architecture 'x86-64'. |
| [ 7.655450] systemd[1]: Inserted module 'autofs4' |
| [ 7.662206] systemd[1]: Set hostname to <cb-test-tgt>. |
| [ 7.821398] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory. |
| [ 7.834131] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. |
| [ 7.849533] systemd[1]: Expecting device dev-ttyS0.device... |
| [ 7.862691] systemd[1]: Starting Forward Password Requests to Wall Directory Watch. |
| [ 7.870469] systemd[1]: Started Forward Password Requests to Wall Directory Watch. |
| [ 7.878072] systemd[1]: Starting Remote File Systems (Pre). |
| [ 7.894567] systemd[1]: Reached target Remote File Systems (Pre). |
| [ 7.900701] systemd[1]: Starting Encrypted Volumes. |
| [ 7.914590] systemd[1]: Reached target Encrypted Volumes. |
| [ 7.920047] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point. |
| [ 7.942559] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. |
| [ 7.951996] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch. |
| [ 7.960045] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. |
| [ 7.967974] systemd[1]: Starting Paths. |
| [ 7.982620] systemd[1]: Reached target Paths. |
| [ 7.987063] systemd[1]: Starting Swap. |
| [ 7.998538] systemd[1]: Reached target Swap. |
| [ 8.002833] systemd[1]: Starting Root Slice. |
| [ 8.014536] systemd[1]: Created slice Root Slice. |
| [ 8.019264] systemd[1]: Starting User and Session Slice. |
| [ 8.034522] systemd[1]: Created slice User and Session Slice. |
| [ 8.040295] systemd[1]: Starting Delayed Shutdown Socket. |
| [ 8.054510] systemd[1]: Listening on Delayed Shutdown Socket. |
| [ 8.060277] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. |
| [ 8.078509] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. |
| [ 8.085487] systemd[1]: Starting Journal Socket (/dev/log). |
| [ 8.102508] systemd[1]: Listening on Journal Socket (/dev/log). |
| [ 8.108473] systemd[1]: Starting udev Kernel Socket. |
| [ 8.122508] systemd[1]: Listening on udev Kernel Socket. |
| [ 8.127861] systemd[1]: Starting udev Control Socket. |
| [ 8.142491] systemd[1]: Listening on udev Control Socket. |
| [ 8.147922] systemd[1]: Starting Journal Socket. |
| [ 8.162478] systemd[1]: Listening on Journal Socket. |
| [ 8.167488] systemd[1]: Starting System Slice. |
| [ 8.182472] systemd[1]: Created slice System Slice. |
| [ 8.187380] systemd[1]: Starting system-getty.slice. |
| [ 8.202480] systemd[1]: Created slice system-getty.slice. |
| [ 8.207899] systemd[1]: Starting system-serial\x2dgetty.slice. |
| [ 8.222461] systemd[1]: Created slice system-serial\x2dgetty.slice. |
| [ 8.228780] systemd[1]: Starting Increase datagram queue length... |
| [ 8.247938] systemd[1]: Starting udev Coldplug all Devices... |
| [ 8.285141] systemd[1]: Starting Load Kernel Modules... |
| [ 8.302298] systemd[1]: Started Set Up Additional Binary Formats. |
| [ 8.308644] systemd[1]: Mounting Debug File System... |
| [ 8.324468] systemd[1]: Starting Create list of required static device nodes for the current kernel... |
| [ 8.348154] systemd[1]: Mounting POSIX Message Queue File System... |
| [ 8.363668] systemd[1]: Mounting Huge Pages File System... |
| [ 8.379695] systemd[1]: Starting Slices. |
| [ 8.394469] systemd[1]: Reached target Slices. |
| [ 8.399008] systemd[1]: Starting Remount Root and Kernel File Systems... |
| [ 8.426454] systemd[1]: Mounted Huge Pages File System. |
| [ 8.442400] systemd[1]: Mounted POSIX Message Queue File System. |
| [ 8.458450] systemd[1]: Mounted Debug File System. |
| [ 8.474413] systemd[1]: Started Increase datagram queue length. |
| [ 8.490377] systemd[1]: Started Load Kernel Modules. |
| [ 8.510449] systemd[1]: Started Create list of required static device nodes for the current kernel. |
| [ 8.534424] systemd[1]: Started Remount Root and Kernel File Systems. |
| [ 8.550370] systemd[1]: Started udev Coldplug all Devices. |
| [ 8.596270] systemd[1]: Started Various fixups to make systemd work better on Debian. |
| [ 8.604146] systemd[1]: Starting Load/Save Random Seed... |
| [ 8.619984] systemd[1]: Starting Create Static Device Nodes in /dev... |
| [ 8.639871] systemd[1]: Starting Apply Kernel Variables... |
| [ 8.656294] systemd[1]: Mounted Configuration File System. |
| [ 8.661902] systemd[1]: Mounted FUSE Control File System. |
| [ 8.667338] systemd[1]: Starting Syslog Socket. |
| [ 8.682398] systemd[1]: Listening on Syslog Socket. |
| [ 8.687382] systemd[1]: Starting Sockets. |
| [ 8.702367] systemd[1]: Reached target Sockets. |
| [ 8.706983] systemd[1]: Starting Journal Service... |
| [ 8.730321] systemd[1]: Started Journal Service. |
| [ 8.808743] systemd-udevd[211]: starting version 215 |
| [ 8.945772] systemd-journald[210]: Received request to flush runtime journal from PID 1 |
| [ 8.959824] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 |
| [ 8.969960] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 |
| [ 8.979008] ACPI: Power Button [PWRB] |
| [ 8.984465] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 |
| [ 8.992879] ACPI: Power Button [PWRF] |
| [ 8.998758] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled |
| [ 9.006677] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled |
| [ 9.014975] EDAC MC: Ver: 3.0.0 |
| [ 9.015001] input: PC Speaker as /devices/platform/pcspkr/input/input4 |
| [ 9.028743] i2c i2c-0: nForce2 SMBus adapter at 0x2c80 |
| [ 9.034103] i2c i2c-1: nForce2 SMBus adapter at 0x2cc0 |
| [ 9.040776] MCE: In-kernel MCE decoding enabled. |
| [ 9.047306] acpi-cpufreq: overriding BIOS provided _PSD data |
| [ 9.054623] AMD64 EDAC driver v3.4.0 |
| [ 9.058306] EDAC amd64: DRAM ECC enabled. |
| [ 9.059094] kvm: Nested Virtualization enabled |
| [ 9.059099] kvm: Nested Paging enabled |
| [ 9.070786] EDAC amd64: F10h detected (node 0). |
| [ 9.075394] EDAC MC: DCT0 chip selects: |
| [ 9.075410] EDAC amd64: MC: 0: 0MB 1: 0MB |
| [ 9.080139] EDAC amd64: MC: 2: 0MB 3: 0MB |
| [ 9.084850] EDAC amd64: MC: 4: 0MB 5: 0MB |
| [ 9.089554] EDAC amd64: MC: 6: 1024MB 7: 1024MB |
| [ 9.089560] EDAC MC: DCT1 chip selects: |
| [ 9.089561] EDAC amd64: MC: 0: 0MB 1: 0MB |
| [ 9.089561] EDAC amd64: MC: 2: 0MB 3: 0MB |
| [ 9.089562] EDAC amd64: MC: 4: 0MB 5: 0MB |
| [ 9.089563] EDAC amd64: MC: 6: 1024MB 7: 1024MB |
| [ 9.089564] EDAC amd64: using x4 syndromes. |
| [ 9.089565] EDAC amd64: MCT channel count: 2 |
| [ 9.089801] EDAC amd64: CS6: Registered DDR2 RAM |
| [ 9.089802] EDAC amd64: CS7: Registered DDR2 RAM |
| [ 9.090076] EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT) |
| [ 9.090175] EDAC amd64: DRAM ECC enabled. |
| [ 9.090191] EDAC amd64: F10h detected (node 1). |
| [ 9.090227] EDAC MC: DCT0 chip selects: |
| [ 9.090229] EDAC amd64: MC: 0: 1024MB 1: 0MB |
| [ 9.090230] EDAC amd64: MC: 2: 0MB 3: 0MB |
| [ 9.090231] EDAC amd64: MC: 4: 0MB 5: 0MB |
| [ 9.090231] EDAC amd64: MC: 6: 0MB 7: 0MB |
| [ 9.090232] EDAC MC: DCT1 chip selects: |
| [ 9.090233] EDAC amd64: MC: 0: 0MB 1: 0MB |
| [ 9.090234] EDAC amd64: MC: 2: 0MB 3: 0MB |
| [ 9.090234] EDAC amd64: MC: 4: 0MB 5: 0MB |
| [ 9.090235] EDAC amd64: MC: 6: 0MB 7: 0MB |
| [ 9.090236] EDAC amd64: using x4 syndromes. |
| [ 9.090237] EDAC amd64: MCT channel count: 1 |
| [ 9.090276] EDAC amd64: CS0: Registered DDR2 RAM |
| [ 9.090475] EDAC MC1: Giving out device to module amd64_edac controller F10h: DEV 0000:00:19.2 (INTERRUPT) |
| [ 9.090679] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED) |
| [ 9.346436] random: nonblocking pool is initialized |
| [ 39.495274] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS***** |