| [ 0.000000] Initializing cgroup subsys cpuset |
| [ 0.000000] Initializing cgroup subsys cpu |
| [ 0.000000] Initializing cgroup subsys cpuacct |
| [ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt9-2 (2015-04-13) |
| [ 0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt-x86_64 rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt-x86_64 |
| [ 0.000000] e820: BIOS-provided physical RAM map: |
| [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff99fff] usable |
| [ 0.000000] BIOS-e820: [mem 0x00000000bff9a000-0x00000000cfffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable |
| [ 0.000000] NX (Execute Disable) protection: active |
| [ 0.000000] SMBIOS 2.7 present. |
| [ 0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS RAPTOR-NORMAL 05/08/2016 |
| [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable |
| [ 0.000000] AGP: No AGP bridge found |
| [ 0.000000] e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000 |
| [ 0.000000] MTRR default type: uncachable |
| [ 0.000000] MTRR fixed ranges enabled: |
| [ 0.000000] 00000-9FFFF write-back |
| [ 0.000000] A0000-BFFFF uncachable |
| [ 0.000000] C0000-FFFFF write-back |
| [ 0.000000] MTRR variable ranges enabled: |
| [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back |
| [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back |
| [ 0.000000] 2 base 0000F8000000 mask FFFFFC000000 write-combining |
| [ 0.000000] 3 disabled |
| [ 0.000000] 4 disabled |
| [ 0.000000] 5 disabled |
| [ 0.000000] 6 disabled |
| [ 0.000000] 7 disabled |
| [ 0.000000] TOM2: 0000000180000000 aka 6144M |
| [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 |
| [ 0.000000] e820: last_pfn = 0xbff9a max_arch_pfn = 0x400000000 |
| [ 0.000000] found SMP MP-table at [mem 0x000f0820-0x000f082f] mapped at [ffff8800000f0820] |
| [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 |
| [ 0.000000] Using GB pages for direct mapping |
| [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] |
| [ 0.000000] [mem 0x00000000-0x000fffff] page 4k |
| [ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE |
| [ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE |
| [ 0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE |
| [ 0.000000] init_memory_mapping: [mem 0x17fe00000-0x17fffffff] |
| [ 0.000000] [mem 0x17fe00000-0x17fffffff] page 1G |
| [ 0.000000] init_memory_mapping: [mem 0x17c000000-0x17fdfffff] |
| [ 0.000000] [mem 0x17c000000-0x17fdfffff] page 1G |
| [ 0.000000] init_memory_mapping: [mem 0x100000000-0x17bffffff] |
| [ 0.000000] [mem 0x100000000-0x17bffffff] page 1G |
| [ 0.000000] init_memory_mapping: [mem 0x00100000-0xbff99fff] |
| [ 0.000000] [mem 0x00100000-0x001fffff] page 4k |
| [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M |
| [ 0.000000] [mem 0x40000000-0x7fffffff] page 1G |
| [ 0.000000] [mem 0x80000000-0xbfdfffff] page 2M |
| [ 0.000000] [mem 0xbfe00000-0xbff99fff] page 4k |
| [ 0.000000] RAMDISK: [mem 0x7f24c000-0x7fffefff] |
| [ 0.000000] ACPI: Early table checksum verification disabled |
| [ 0.000000] ACPI: RSDP 0x00000000000F09F0 000024 (v02 CORE ) |
| [ 0.000000] ACPI: XSDT 0x00000000BFFAB0E0 00006C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: FACP 0x00000000BFFAD8D0 000074 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: DSDT 0x00000000BFFAB280 002644 (v02 ASUS COREBOOT 00000001 INTL 20150619) |
| [ 0.000000] ACPI: FACS 0x00000000BFFAB240 000040 |
| [ 0.000000] ACPI: SSDT 0x00000000BFFAD9D0 000EA6 (v02 CORE COREBOOT 0000002A CORE 0000002A) |
| [ 0.000000] ACPI: TCPA 0x00000000BFFAE880 000032 (v02 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: APIC 0x00000000BFFAE8C0 0000C6 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SRAT 0x00000000BFFAE990 000150 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SLIT 0x00000000BFFAEAE0 000030 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: HPET 0x00000000BFFAEB10 000038 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SRAT 0x00000000BFFAEB50 000150 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SLIT 0x00000000BFFAECA0 000030 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0 |
| [ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0 |
| [ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0 |
| [ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0 |
| [ 0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1 |
| [ 0.000000] SRAT: PXM 1 -> APIC 0x05 -> Node 1 |
| [ 0.000000] SRAT: PXM 1 -> APIC 0x06 -> Node 1 |
| [ 0.000000] SRAT: PXM 1 -> APIC 0x07 -> Node 1 |
| [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff] |
| [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff] |
| [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x13fffffff] |
| [ 0.000000] SRAT: Node 1 PXM 1 [mem 0x140000000-0x17fffffff] |
| [ 0.000000] NUMA: Initialized distance table, cnt=2 |
| [ 0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xbfffffff] -> [mem 0x00000000-0xbfffffff] |
| [ 0.000000] NUMA: Node 0 [mem 0x00000000-0xbfffffff] + [mem 0x100000000-0x13fffffff] -> [mem 0x00000000-0x13fffffff] |
| [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff] |
| [ 0.000000] NODE_DATA [mem 0x13fffb000-0x13fffffff] |
| [ 0.000000] Initmem setup node 1 [mem 0x140000000-0x17fffffff] |
| [ 0.000000] NODE_DATA [mem 0x17fff8000-0x17fffcfff] |
| [ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013be00000-ffff88013f5fffff] on node 0 |
| [ 0.000000] [ffffea0004600000-ffffea00053fffff] PMD -> [ffff88017e600000-ffff88017f3fffff] on node 1 |
| [ 0.000000] Zone ranges: |
| [ 0.000000] DMA [mem 0x00001000-0x00ffffff] |
| [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] |
| [ 0.000000] Normal [mem 0x100000000-0x17fffffff] |
| [ 0.000000] Movable zone start for each node |
| [ 0.000000] Early memory node ranges |
| [ 0.000000] node 0: [mem 0x00001000-0x0009efff] |
| [ 0.000000] node 0: [mem 0x00100000-0xbff99fff] |
| [ 0.000000] node 0: [mem 0x100000000-0x13fffffff] |
| [ 0.000000] node 1: [mem 0x140000000-0x17fffffff] |
| [ 0.000000] On node 0 totalpages: 1048376 |
| [ 0.000000] DMA zone: 56 pages used for memmap |
| [ 0.000000] DMA zone: 21 pages reserved |
| [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 |
| [ 0.000000] DMA32 zone: 10695 pages used for memmap |
| [ 0.000000] DMA32 zone: 782234 pages, LIFO batch:31 |
| [ 0.000000] Normal zone: 3584 pages used for memmap |
| [ 0.000000] Normal zone: 262144 pages, LIFO batch:31 |
| [ 0.000000] On node 1 totalpages: 262144 |
| [ 0.000000] Normal zone: 3584 pages used for memmap |
| [ 0.000000] Normal zone: 262144 pages, LIFO batch:31 |
| [ 0.000000] ACPI: PM-Timer IO Port: 0x2008 |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) |
| [ 0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0]) |
| [ 0.000000] IOAPIC[0]: apic_id 24, version 17, address 0xfec00000, GSI 0-23 |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) |
| [ 0.000000] ACPI: IRQ9 used by override. |
| [ 0.000000] ACPI: IRQ14 used by override. |
| [ 0.000000] ACPI: IRQ15 used by override. |
| [ 0.000000] Using ACPI (MADT) for SMP configuration information |
| [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 |
| [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs |
| [ 0.000000] nr_irqs_gsi: 40 |
| [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xbff9a000-0xcfffffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xffffffff] |
| [ 0.000000] e820: [mem 0xd0000000-0xffffffff] available for PCI devices |
| [ 0.000000] Booting paravirtualized kernel on bare hardware |
| [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:2 |
| [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s80896 r8192 d21504 u524288 |
| [ 0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152 |
| [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [1] 4 5 6 7 |
| [ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 1292580 |
| [ 0.000000] Policy zone: Normal |
| [ 0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt-x86_64 rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt-x86_64 |
| [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) |
| [ 0.000000] AGP: Checking aperture... |
| [ 0.000000] AGP: No AGP bridge found |
| [ 0.000000] AGP: Node 0: aperture [bus addr 0xe5fa000000-0xe5fbffffff] (32MB) |
| [ 0.000000] Aperture beyond 4GB. Ignoring. |
| [ 0.000000] AGP: Your BIOS doesn't leave a aperture memory hole |
| [ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup |
| [ 0.000000] AGP: This costs you 64MB of RAM |
| [ 0.000000] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB) |
| [ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff] |
| [ 0.000000] Memory: 5012208K/5242080K available (5207K kernel code, 946K rwdata, 1832K rodata, 1204K init, 840K bss, 229872K reserved) |
| [ 0.000000] Hierarchical RCU implementation. |
| [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. |
| [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8. |
| [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 |
| [ 0.000000] NR_IRQS:33024 nr_irqs:744 16 |
| [ 0.000000] spurious 8259A interrupt: IRQ7. |
| [ 0.000000] Console: colour VGA+ 80x25 |
| [ 0.000000] console [ttyS0] enabled |
| [ 0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl |
| [ 0.000000] hpet clockevent registered |
| [ 0.000000] tsc: Fast TSC calibration using PIT |
| [ 0.000000] tsc: Detected 1909.643 MHz processor |
| [ 0.000158] Calibrating delay loop (skipped), value calculated using timer frequency.. 3819.28 BogoMIPS (lpj=7638572) |
| [ 0.010795] pid_max: default: 32768 minimum: 301 |
| [ 0.015441] ACPI: Core revision 20140424 |
| [ 0.021794] ACPI: All ACPI Tables successfully acquired |
| [ 0.027143] Security Framework initialized |
| [ 0.031271] AppArmor: AppArmor disabled by boot time parameter |
| [ 0.037107] Yama: disabled by default; enable with sysctl kernel.yama.* |
| [ 0.044823] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) |
| [ 0.057967] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) |
| [ 0.067674] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) |
| [ 0.074573] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) |
| [ 0.082422] Initializing cgroup subsys memory |
| [ 0.086802] Initializing cgroup subsys devices |
| [ 0.091274] Initializing cgroup subsys freezer |
| [ 0.095736] Initializing cgroup subsys net_cls |
| [ 0.100202] Initializing cgroup subsys blkio |
| [ 0.104488] Initializing cgroup subsys perf_event |
| [ 0.109207] Initializing cgroup subsys net_prio |
| [ 0.113795] tseg: 0000000000 |
| [ 0.113806] CPU: Physical Processor ID: 0 |
| [ 0.117826] CPU: Processor Core ID: 0 |
| [ 0.121499] mce: CPU supports 6 MCE banks |
| [ 0.125527] LVT offset 0 assigned for vector 0xf9 |
| [ 0.130247] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8 |
| Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0 |
| tlb_flushall_shift: 6 |
| [ 0.145588] Freeing SMP alternatives memory: 20K (ffffffff81a1b000 - ffffffff81a20000) |
| [ 0.154598] ftrace: allocating 21614 entries in 85 pages |
| [ 0.169932] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0 |
| [ 0.215447] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 8347 (fam: 10, model: 02, stepping: 01) |
| [ 0.332520] Performance Events: AMD PMU driver. |
| [ 0.337089] ... version: 0 |
| [ 0.341101] ... bit width: 48 |
| [ 0.345199] ... generic registers: 4 |
| [ 0.349214] ... value mask: 0000ffffffffffff |
| [ 0.354519] ... max period: 00007fffffffffff |
| [ 0.359849] ... fixed-purpose events: 0 |
| [ 0.363869] ... event mask: 000000000000000f |
| [ 0.371733] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. |
| [ 0.379936] x86: Booting SMP configuration: |
| [ 0.384131] .... node #0, CPUs: #1 #2 #3 |
| [ 0.428493] .... node #1, CPUs: #4 #5 #6 #7 |
| [ 0.581212] x86: Booted up 2 nodes, 8 CPUs |
| [ 0.585515] smpboot: Total of 8 processors activated (30556.37 BogoMIPS) |
| [ 0.598018] devtmpfs: initialized |
| [ 0.609320] pinctrl core: initialized pinctrl subsystem |
| [ 0.614722] NET: Registered protocol family 16 |
| [ 0.619386] cpuidle: using governor ladder |
| [ 0.623489] cpuidle: using governor menu |
| [ 0.627426] node 0 link 1: io port [1000, 3fff] |
| [ 0.627430] TOM: 00000000c0000000 aka 3072M |
| [ 0.631623] Fam 10h mmconf [mem 0xc0000000-0xcfffffff] |
| [ 0.631627] node 0 link 1: mmio [fc000000, fc3fffff] |
| [ 0.631630] node 0 link 1: mmio [f8000000, fbffffff] |
| [ 0.631632] TOM2: 0000000180000000 aka 6144M |
| [ 0.635912] bus: [bus 00-05] on node 0 link 1 |
| [ 0.635914] bus: 00 [io 0x0000-0xffff] |
| [ 0.635915] bus: 00 [mem 0xd0000000-0xffffffff] |
| [ 0.635917] bus: 00 [mem 0x180000000-0xfcffffffff] |
| [ 0.636025] ACPI: bus type PCI registered |
| [ 0.640045] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 |
| [ 0.646648] PCI: Using configuration type 1 for base access |
| [ 0.652224] PCI: Using configuration type 1 for extended access |
| [ 0.669336] ACPI: Added _OSI(Module Device) |
| [ 0.673531] ACPI: Added _OSI(Processor Device) |
| [ 0.677983] ACPI: Added _OSI(3.0 _SCP Extensions) |
| [ 0.682693] ACPI: Added _OSI(Processor Aggregator Device) |
| [ 0.691700] ACPI: Interpreter enabled |
| [ 0.695381] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580) |
| [ 0.704648] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580) |
| [ 0.713911] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580) |
| [ 0.723181] ACPI: (supports S0 S1 S5) |
| [ 0.726852] ACPI: Using IOAPIC for interrupt routing |
| [ 0.731861] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| [ 0.760296] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05]) |
| [ 0.766487] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] |
| [ 0.774696] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] |
| [ 0.812768] acpi PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x03b0-0x03df] ignored |
| [ 0.822770] PCI host bridge to bus 0000:00 |
| [ 0.826878] pci_bus 0000:00: root bus resource [bus 00-05] |
| [ 0.832369] pci_bus 0000:00: root bus resource [io 0x0d00-0x3fff] |
| [ 0.838555] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] |
| [ 0.845433] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff] |
| [ 0.852311] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc3fffff] |
| [ 0.859191] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] |
| [ 0.865388] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000 |
| [ 0.865596] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100 |
| [ 0.865604] pci 0000:00:01.0: reg 0x10: [io 0x2c00-0x2c7f] |
| [ 0.865737] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500 |
| [ 0.865745] pci 0000:00:01.1: reg 0x10: [io 0x3000-0x301f] |
| [ 0.865764] pci 0000:00:01.1: reg 0x20: [io 0x2c80-0x2cbf] |
| [ 0.865769] pci 0000:00:01.1: reg 0x24: [io 0x2cc0-0x2cff] |
| [ 0.865798] pci 0000:00:01.1: PME# supported from D3hot D3cold |
| [ 0.865896] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310 |
| [ 0.865904] pci 0000:00:02.0: reg 0x10: [mem 0xfc300000-0xfc300fff] |
| [ 0.865956] pci 0000:00:02.0: supports D1 D2 |
| [ 0.865966] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.866012] pci 0000:00:02.0: System wakeup disabled by ACPI |
| [ 0.871737] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320 |
| [ 0.871752] pci 0000:00:02.1: reg 0x10: [mem 0xfc303000-0xfc3030ff] |
| [ 0.871793] pci 0000:00:02.1: supports D1 D2 |
| [ 0.871795] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.871848] pci 0000:00:02.1: System wakeup disabled by ACPI |
| [ 0.877584] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a |
| [ 0.877613] pci 0000:00:06.0: reg 0x20: [io 0x3020-0x302f] |
| [ 0.877625] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] |
| [ 0.884758] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io 0x03f6] |
| [ 0.891290] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] |
| [ 0.898429] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io 0x0376] |
| [ 0.905060] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185 |
| [ 0.905071] pci 0000:00:07.0: reg 0x10: [io 0x3050-0x3057] |
| [ 0.905088] pci 0000:00:07.0: reg 0x14: [io 0x3070-0x3073] |
| [ 0.905099] pci 0000:00:07.0: reg 0x18: [io 0x3058-0x305f] |
| [ 0.905106] pci 0000:00:07.0: reg 0x1c: [io 0x3074-0x3077] |
| [ 0.905111] pci 0000:00:07.0: reg 0x20: [io 0x3030-0x303f] |
| [ 0.905116] pci 0000:00:07.0: reg 0x24: [mem 0xfc301000-0xfc301fff] |
| [ 0.905239] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185 |
| [ 0.905249] pci 0000:00:08.0: reg 0x10: [io 0x3060-0x3067] |
| [ 0.905254] pci 0000:00:08.0: reg 0x14: [io 0x3078-0x307b] |
| [ 0.905259] pci 0000:00:08.0: reg 0x18: [io 0x3068-0x306f] |
| [ 0.905263] pci 0000:00:08.0: reg 0x1c: [io 0x307c-0x307f] |
| [ 0.905268] pci 0000:00:08.0: reg 0x20: [io 0x3040-0x304f] |
| [ 0.905273] pci 0000:00:08.0: reg 0x24: [mem 0xfc302000-0xfc302fff] |
| [ 0.905370] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400 |
| [ 0.905455] pci 0000:00:09.0: System wakeup disabled by ACPI |
| [ 0.911178] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400 |
| [ 0.911230] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.911276] pci 0000:00:0b.0: System wakeup disabled by ACPI |
| [ 0.917000] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400 |
| [ 0.917079] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.917137] pci 0000:00:0c.0: System wakeup disabled by ACPI |
| [ 0.922864] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400 |
| [ 0.922925] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.923006] pci 0000:00:0d.0: System wakeup disabled by ACPI |
| [ 0.928721] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400 |
| [ 0.928760] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.928832] pci 0000:00:0e.0: System wakeup disabled by ACPI |
| [ 0.934573] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000 |
| [ 0.934713] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000 |
| [ 0.934802] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000 |
| [ 0.934898] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000 |
| [ 0.935032] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000 |
| [ 0.935148] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000 |
| [ 0.935304] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000 |
| [ 0.935419] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000 |
| [ 0.935544] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000 |
| [ 0.935651] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000 |
| [ 0.935852] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000 |
| [ 0.935877] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref] |
| [ 0.935897] pci 0000:01:04.0: reg 0x14: [mem 0xfc000000-0xfc03ffff] |
| [ 0.935910] pci 0000:01:04.0: reg 0x18: [io 0x1000-0x107f] |
| [ 0.935955] pci 0000:01:04.0: supports D1 D2 |
| [ 0.936068] pci 0000:00:09.0: PCI bridge to [bus 01] |
| [ 0.941038] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff] |
| [ 0.941041] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff] |
| [ 0.941044] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref] |
| [ 0.941149] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000 |
| [ 0.941212] pci 0000:02:00.0: reg 0x10: [mem 0xfc100000-0xfc10ffff 64bit] |
| [ 0.941256] pci 0000:02:00.0: reg 0x30: [mem 0x69630000-0x6963ffff pref] |
| [ 0.941340] pci 0000:02:00.0: PME# supported from D3hot D3cold |
| [ 0.941434] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' |
| [ 0.951430] pci 0000:00:0b.0: PCI bridge to [bus 02] |
| [ 0.956399] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff] |
| [ 0.956496] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000 |
| [ 0.956537] pci 0000:03:00.0: reg 0x10: [mem 0xfc200000-0xfc20ffff 64bit] |
| [ 0.956654] pci 0000:03:00.0: PME# supported from D3hot D3cold |
| [ 0.956771] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' |
| [ 0.966773] pci 0000:00:0c.0: PCI bridge to [bus 03] |
| [ 0.971743] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff] |
| [ 0.971820] pci 0000:00:0d.0: PCI bridge to [bus 04] |
| [ 0.976876] pci 0000:00:0e.0: PCI bridge to [bus 05] |
| [ 0.981859] pci_bus 0000:00: on NUMA node 0 |
| [ 0.981955] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19) |
| [ 0.988102] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19) |
| [ 0.994237] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled. |
| [ 1.001545] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled. |
| [ 1.008838] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled. |
| [ 1.016145] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.023433] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23) |
| [ 1.029565] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23) |
| [ 1.035694] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.042998] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.050302] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.057595] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23) |
| [ 1.063721] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23) |
| [ 1.069849] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.077146] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.084444] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.091733] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. |
| [ 1.100251] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled. |
| [ 1.106710] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled. |
| [ 1.113168] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled. |
| [ 1.119629] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled. |
| [ 1.126337] ACPI: Enabled 1 GPEs in block 00 to 1F |
| [ 1.131461] vgaarb: setting as boot device: PCI:0000:01:04.0 |
| [ 1.137129] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none |
| [ 1.145227] vgaarb: loaded |
| [ 1.147943] vgaarb: bridge control possible 0000:01:04.0 |
| [ 1.153428] PCI: Using ACPI for IRQ routing |
| [ 1.157623] PCI: pci_cache_line_size set to 64 bytes |
| [ 1.157680] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] |
| [ 1.157683] e820: reserve RAM buffer [mem 0xbff9a000-0xbfffffff] |
| [ 1.157990] HPET: 3 timers in total, 0 timers will be used for per-cpu timer |
| [ 1.165041] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 |
| [ 1.170093] hpet0: 3 comparators, 32-bit 25.000000 MHz counter |
| [ 1.178774] Switched to clocksource hpet |
| [ 1.194485] pnp: PnP ACPI init |
| [ 1.197591] ACPI: bus type PNP registered |
| [ 1.202123] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) |
| [ 1.202209] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active) |
| [ 1.202291] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active) |
| [ 1.202388] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active) |
| [ 1.202425] pnp 00:04: [dma 2] |
| [ 1.202473] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active) |
| [ 1.202495] pnp: PnP ACPI: found 5 devices |
| [ 1.206604] ACPI: bus type PNP unregistered |
| [ 1.218645] pci 0000:02:00.0: can't claim BAR 6 [mem 0x69630000-0x6963ffff pref]: no compatible bridge window |
| [ 1.228601] pci 0000:00:09.0: PCI bridge to [bus 01] |
| [ 1.233577] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff] |
| [ 1.239678] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff] |
| [ 1.246471] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref] |
| [ 1.253705] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc110000-0xfc11ffff pref] |
| [ 1.260927] pci 0000:00:0b.0: PCI bridge to [bus 02] |
| [ 1.265903] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff] |
| [ 1.272697] pci 0000:00:0c.0: PCI bridge to [bus 03] |
| [ 1.277666] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff] |
| [ 1.284462] pci 0000:00:0d.0: PCI bridge to [bus 04] |
| [ 1.289437] pci 0000:00:0e.0: PCI bridge to [bus 05] |
| [ 1.294420] pci_bus 0000:00: resource 4 [io 0x0d00-0x3fff] |
| [ 1.294423] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff] |
| [ 1.294425] pci_bus 0000:00: resource 6 [mem 0xf8000000-0xfbffffff] |
| [ 1.294428] pci_bus 0000:00: resource 7 [mem 0xfc000000-0xfc3fffff] |
| [ 1.294430] pci_bus 0000:00: resource 8 [io 0x0000-0x0cf7] |
| [ 1.294433] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] |
| [ 1.294436] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff] |
| [ 1.294439] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref] |
| [ 1.294441] pci_bus 0000:02: resource 1 [mem 0xfc100000-0xfc1fffff] |
| [ 1.294444] pci_bus 0000:03: resource 1 [mem 0xfc200000-0xfc2fffff] |
| [ 1.294589] NET: Registered protocol family 2 |
| [ 1.299491] TCP established hash table entries: 65536 (order: 7, 524288 bytes) |
| [ 1.307181] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) |
| [ 1.314516] TCP: Hash tables configured (established 65536 bind 65536) |
| [ 1.321114] TCP: reno registered |
| [ 1.324378] UDP hash table entries: 4096 (order: 5, 131072 bytes) |
| [ 1.330588] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) |
| [ 1.337374] NET: Registered protocol family 1 |
| [ 1.342124] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23 |
| [ 1.348212] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22 |
| [ 1.354125] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.359651] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.365172] pci 0000:00:0b.0: Found disabled HT MSI Mapping |
| [ 1.370755] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.376300] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.381809] pci 0000:00:0c.0: Found disabled HT MSI Mapping |
| [ 1.387396] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.392936] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.398452] pci 0000:00:0d.0: Found disabled HT MSI Mapping |
| [ 1.404040] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.409580] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.415094] pci 0000:00:0e.0: Found disabled HT MSI Mapping |
| [ 1.420673] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.426193] pci 0000:01:04.0: Video device with shadowed ROM |
| [ 1.426202] PCI: CLS 64 bytes, default 64 |
| [ 1.426309] Unpacking initramfs... |
| [ 1.809959] Freeing initrd memory: 14028K (ffff88007f24c000 - ffff88007ffff000) |
| [ 1.817883] PCI-DMA: Disabling AGP. |
| [ 1.822997] PCI-DMA: aperture base @ b4000000 size 65536 KB |
| [ 1.828584] PCI-DMA: using GART IOMMU. |
| [ 1.832341] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture |
| [ 1.844661] platform rtc_cmos: registered platform RTC device (no PNP device found) |
| [ 1.852835] microcode: CPU0: patch_level=0x01000084 |
| [ 1.857728] microcode: CPU1: patch_level=0x01000084 |
| [ 1.862624] microcode: CPU2: patch_level=0x01000084 |
| [ 1.867525] microcode: CPU3: patch_level=0x01000084 |
| [ 1.872429] microcode: CPU4: patch_level=0x01000084 |
| [ 1.877320] microcode: CPU5: patch_level=0x01000084 |
| [ 1.882214] microcode: CPU6: patch_level=0x01000084 |
| [ 1.887110] microcode: CPU7: patch_level=0x01000084 |
| [ 1.892104] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba |
| [ 1.900905] LVT offset 1 assigned for vector 0x400 |
| [ 1.905716] IBS: LVT offset 1 assigned |
| [ 1.909505] perf: AMD IBS detected (0x00000007) |
| [ 1.914664] futex hash table entries: 2048 (order: 5, 131072 bytes) |
| [ 1.921048] audit: initializing netlink subsys (disabled) |
| [ 1.926477] audit: type=2000 audit(1462694881.648:1): initialized |
| [ 1.933353] HugeTLB registered 2 MB page size, pre-allocated 0 pages |
| [ 1.939757] zbud: loaded |
| [ 1.942667] VFS: Disk quotas dquot_6.5.2 |
| [ 1.946637] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) |
| [ 1.953180] msgmni has been set to 9945 |
| [ 1.957569] alg: No test for stdrng (krng) |
| [ 1.961733] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) |
| [ 1.969244] io scheduler noop registered |
| [ 1.973183] io scheduler deadline registered |
| [ 1.977541] io scheduler cfq registered (default) |
| [ 1.982472] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X |
| [ 1.982609] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X |
| [ 1.982724] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X |
| [ 1.982863] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X |
| [ 1.983012] aer 0000:00:0b.0:pcie02: service driver aer loaded |
| [ 1.983040] aer 0000:00:0c.0:pcie02: service driver aer loaded |
| [ 1.983063] aer 0000:00:0d.0:pcie02: service driver aer loaded |
| [ 1.983084] aer 0000:00:0e.0:pcie02: service driver aer loaded |
| [ 1.983107] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt |
| [ 1.990075] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt |
| [ 1.996604] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded |
| [ 1.996614] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt |
| [ 2.003577] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt |
| [ 2.010109] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded |
| [ 2.010118] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt |
| [ 2.017083] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded |
| [ 2.017092] pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt |
| [ 2.024058] pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded |
| [ 2.024090] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 |
| [ 2.029695] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 |
| [ 2.036402] GHES: HEST is not enabled! |
| [ 2.040299] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
| [ 2.066902] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A |
| [ 2.094592] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A |
| [ 2.102521] Linux agpgart interface v0.103 |
| [ 2.106839] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12 |
| [ 2.117254] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| [ 2.122307] serio: i8042 AUX port at 0x60,0x64 irq 12 |
| [ 2.127606] mousedev: PS/2 mouse device common for all mice |
| [ 2.133281] rtc_cmos rtc_cmos: RTC can wake from S4 |
| [ 2.138418] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 |
| [ 2.144816] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs |
| [ 2.152675] ledtrig-cpu: registered to indicate activity on CPUs |
| [ 2.158866] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com> |
| [ 2.165312] AMD IOMMUv2 functionality not available on this system |
| [ 2.171641] TCP: cubic registered |
| [ 2.175115] NET: Registered protocol family 10 |
| [ 2.180007] mip6: Mobile IPv6 |
| [ 2.182990] NET: Registered protocol family 17 |
| [ 2.187525] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 |
| [ 2.196178] mpls_gso: MPLS GSO support |
| [ 2.200804] registered taskstats version 1 |
| [ 2.205679] rtc_cmos rtc_cmos: setting system clock to 2016-05-08 08:08:03 UTC (1462694883) |
| [ 2.214100] PM: Hibernation image not present or could not be loaded. |
| [ 2.215918] Freeing unused kernel memory: 1204K (ffffffff818ee000 - ffffffff81a1b000) |
| [ 2.223760] Write protecting the kernel read-only data: 8192k |
| [ 2.232994] Freeing unused kernel memory: 924K (ffff880001519000 - ffff880001600000) |
| [ 2.241576] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000) |
| [ 2.275661] systemd-udevd[99]: starting version 215 |
| [ 2.281438] random: systemd-udevd urandom read with 3 bits of entropy available |
| [ 2.312190] ACPI: bus type USB registered |
| [ 2.316457] usbcore: registered new interface driver usbfs |
| [ 2.316578] SCSI subsystem initialized |
| [ 2.325846] usbcore: registered new interface driver hub |
| [ 2.326474] FDC 0 is a post-1991 82077 |
| [ 2.336032] usbcore: registered new device driver usb |
| [ 2.341412] pps_core: LinuxPPS API ver. 1 registered |
| [ 2.346416] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> |
| [ 2.356049] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| [ 2.356308] libata version 3.00 loaded. |
| [ 2.363049] PTP clock support registered |
| [ 2.367315] ehci-pci: EHCI PCI platform driver |
| [ 2.372222] ehci-pci 0000:00:02.1: EHCI Host Controller |
| [ 2.377504] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1 |
| [ 2.384964] ehci-pci 0000:00:02.1: debug port 1 |
| [ 2.389594] ehci-pci 0000:00:02.1: cache line size of 64 is not supported |
| [ 2.389631] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc303000 |
| [ 2.389783] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver |
| [ 2.402012] tg3.c:v3.137 (May 11, 2014) |
| [ 2.405877] tg3 0000:02:00.0: enabling device (0004 -> 0006) |
| [ 2.410380] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00 |
| [ 2.410470] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 |
| [ 2.410472] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.410474] usb usb1: Product: EHCI Host Controller |
| [ 2.410475] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd |
| [ 2.410476] usb usb1: SerialNumber: 0000:00:02.1 |
| [ 2.410706] hub 1-0:1.0: USB hub found |
| [ 2.410715] hub 1-0:1.0: 10 ports detected |
| [ 2.411049] sata_nv 0000:00:07.0: version 3.5 |
| [ 2.411273] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21 |
| [ 2.411829] scsi0 : sata_nv |
| [ 2.463511] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17 |
| [ 2.463571] scsi1 : sata_nv |
| [ 2.463731] ata1: SATA max UDMA/133 cmd 0x3050 ctl 0x3070 bmdma 0x3030 irq 21 |
| [ 2.463736] ata2: SATA max UDMA/133 cmd 0x3058 ctl 0x3074 bmdma 0x3038 irq 21 |
| [ 2.486566] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20 |
| [ 2.486575] ohci-pci: OHCI PCI platform driver |
| [ 2.497348] scsi2 : sata_nv |
| [ 2.500341] scsi3 : sata_nv |
| [ 2.503213] ata3: SATA max UDMA/133 cmd 0x3060 ctl 0x3078 bmdma 0x3040 irq 20 |
| [ 2.510344] ata4: SATA max UDMA/133 cmd 0x3068 ctl 0x307c bmdma 0x3048 irq 20 |
| [ 2.517544] pata_amd 0000:00:06.0: version 0.4.1 |
| [ 2.518116] scsi4 : pata_amd |
| [ 2.521189] scsi5 : pata_amd |
| [ 2.524152] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3020 irq 14 |
| [ 2.531146] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3028 irq 15 |
| [ 2.533895] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:61:a2 |
| [ 2.533898] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) |
| [ 2.533900] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] |
| [ 2.533901] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit] |
| [ 2.534056] tg3 0000:03:00.0: enabling device (0004 -> 0006) |
| [ 2.534198] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16 |
| [ 2.584245] ohci-pci 0000:00:02.0: OHCI PCI host controller |
| [ 2.589876] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2 |
| [ 2.597398] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc300000 |
| [ 2.638828] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:63:95 |
| [ 2.649098] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) |
| [ 2.658840] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] |
| [ 2.660354] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 |
| [ 2.660356] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.660357] usb usb2: Product: OHCI PCI host controller |
| [ 2.660359] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd |
| [ 2.660360] usb usb2: SerialNumber: 0000:00:02.0 |
| [ 2.660570] hub 2-0:1.0: USB hub found |
| [ 2.660578] hub 2-0:1.0: 10 ports detected |
| [ 2.704484] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit] |
| [ 2.798243] ata1: SATA link down (SStatus 0 SControl 300) |
| [ 2.826228] ata3: SATA link down (SStatus 0 SControl 300) |
| [ 2.842217] tsc: Refined TSC clocksource calibration: 1909.786 MHz |
| [ 3.114125] ata2: SATA link down (SStatus 0 SControl 300) |
| [ 3.430017] ata4: SATA link down (SStatus 0 SControl 300) |
| [ 3.619450] FS-Cache: Loaded |
| [ 3.627416] RPC: Registered named UNIX socket transport module. |
| [ 3.634489] RPC: Registered udp transport module. |
| [ 3.640562] RPC: Registered tcp transport module. |
| [ 3.646653] RPC: Registered tcp NFSv4.1 backchannel transport module. |
| [ 3.660163] FS-Cache: Netfs 'nfs' registered for caching |
| [ 3.677564] tg3 0000:02:00.0: irq 44 for MSI/MSI-X |
| [ 3.722024] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready |
| [ 3.845961] Switched to clocksource tsc |
| [ 5.358726] tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex |
| [ 5.365259] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX |
| [ 5.372141] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready |
| [ 6.208009] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR) |
| [ 6.222054] systemd[1]: Detected architecture 'x86-64'. |
| [ 6.447864] systemd[1]: Inserted module 'autofs4' |
| [ 6.453886] systemd[1]: Set hostname to <cb-test-tgt>. |
| [ 6.536638] random: nonblocking pool is initialized |
| [ 6.697199] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory. |
| [ 6.709922] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. |
| [ 6.725304] systemd[1]: Expecting device dev-ttyS0.device... |
| [ 6.740929] systemd[1]: Starting Forward Password Requests to Wall Directory Watch. |
| [ 6.748653] systemd[1]: Started Forward Password Requests to Wall Directory Watch. |
| [ 6.756242] systemd[1]: Starting Remote File Systems (Pre). |
| [ 6.772968] systemd[1]: Reached target Remote File Systems (Pre). |
| [ 6.779139] systemd[1]: Starting Encrypted Volumes. |
| [ 6.792884] systemd[1]: Reached target Encrypted Volumes. |
| [ 6.798327] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point. |
| [ 6.820871] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. |
| [ 6.830291] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch. |
| [ 6.838339] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. |
| [ 6.846273] systemd[1]: Starting Paths. |
| [ 6.860956] systemd[1]: Reached target Paths. |
| [ 6.865399] systemd[1]: Starting Swap. |
| [ 6.876863] systemd[1]: Reached target Swap. |
| [ 6.881167] systemd[1]: Starting Root Slice. |
| [ 6.892859] systemd[1]: Created slice Root Slice. |
| [ 6.897587] systemd[1]: Starting User and Session Slice. |
| [ 6.912861] systemd[1]: Created slice User and Session Slice. |
| [ 6.918636] systemd[1]: Starting Delayed Shutdown Socket. |
| [ 6.932852] systemd[1]: Listening on Delayed Shutdown Socket. |
| [ 6.938618] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. |
| [ 6.956834] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. |
| [ 6.963808] systemd[1]: Starting Journal Socket (/dev/log). |
| [ 6.980823] systemd[1]: Listening on Journal Socket (/dev/log). |
| [ 6.986775] systemd[1]: Starting udev Kernel Socket. |
| [ 7.000829] systemd[1]: Listening on udev Kernel Socket. |
| [ 7.006175] systemd[1]: Starting udev Control Socket. |
| [ 7.020805] systemd[1]: Listening on udev Control Socket. |
| [ 7.026233] systemd[1]: Starting Journal Socket. |
| [ 7.040796] systemd[1]: Listening on Journal Socket. |
| [ 7.045807] systemd[1]: Starting System Slice. |
| [ 7.060792] systemd[1]: Created slice System Slice. |
| [ 7.065696] systemd[1]: Starting system-getty.slice. |
| [ 7.080793] systemd[1]: Created slice system-getty.slice. |
| [ 7.086217] systemd[1]: Starting system-serial\x2dgetty.slice. |
| [ 7.100774] systemd[1]: Created slice system-serial\x2dgetty.slice. |
| [ 7.107083] systemd[1]: Starting Increase datagram queue length... |
| [ 7.126157] systemd[1]: Starting udev Coldplug all Devices... |
| [ 7.355692] systemd[1]: Starting Load Kernel Modules... |
| [ 7.384781] systemd[1]: Started Set Up Additional Binary Formats. |
| [ 7.391118] systemd[1]: Mounting Debug File System... |
| [ 7.406411] systemd[1]: Starting Create list of required static device nodes for the current kernel... |
| [ 7.429767] systemd[1]: Mounting POSIX Message Queue File System... |
| [ 7.445993] systemd[1]: Mounting Huge Pages File System... |
| [ 7.461663] systemd[1]: Starting Slices. |
| [ 7.476719] systemd[1]: Reached target Slices. |
| [ 7.481265] systemd[1]: Starting Remount Root and Kernel File Systems... |
| [ 7.512713] systemd[1]: Mounted Huge Pages File System. |
| [ 7.528700] systemd[1]: Mounted POSIX Message Queue File System. |
| [ 7.544629] systemd[1]: Mounted Debug File System. |
| [ 7.560663] systemd[1]: Started Increase datagram queue length. |
| [ 7.576635] systemd[1]: Started Load Kernel Modules. |
| [ 7.596638] systemd[1]: Started Create list of required static device nodes for the current kernel. |
| [ 7.620669] systemd[1]: Started Remount Root and Kernel File Systems. |
| [ 7.636624] systemd[1]: Started udev Coldplug all Devices. |
| [ 7.682088] systemd[1]: Started Various fixups to make systemd work better on Debian. |
| [ 7.689953] systemd[1]: Starting Load/Save Random Seed... |
| [ 7.706196] systemd[1]: Starting Create Static Device Nodes in /dev... |
| [ 7.730153] systemd[1]: Starting Apply Kernel Variables... |
| [ 7.746185] systemd[1]: Mounted Configuration File System. |
| [ 7.751786] systemd[1]: Mounted FUSE Control File System. |
| [ 7.757213] systemd[1]: Starting Syslog Socket. |
| [ 7.772626] systemd[1]: Listening on Syslog Socket. |
| [ 7.777657] systemd[1]: Starting Sockets. |
| [ 7.792595] systemd[1]: Reached target Sockets. |
| [ 7.797228] systemd[1]: Starting Journal Service... |
| [ 7.824580] systemd[1]: Started Journal Service. |
| [ 7.958441] systemd-udevd[211]: starting version 215 |
| [ 8.227250] systemd-journald[208]: Received request to flush runtime journal from PID 1 |
| [ 8.731227] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 |
| [ 8.738461] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled |
| [ 8.748591] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled |
| [ 8.748825] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 |
| [ 8.748833] ACPI: Power Button [PWRB] |
| [ 8.748910] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 |
| [ 8.748912] ACPI: Power Button [PWRF] |
| [ 8.780186] EDAC MC: Ver: 3.0.0 |
| [ 8.780360] i2c i2c-0: nForce2 SMBus adapter at 0x2c80 |
| [ 8.780392] i2c i2c-1: nForce2 SMBus adapter at 0x2cc0 |
| [ 8.796979] input: PC Speaker as /devices/platform/pcspkr/input/input4 |
| [ 8.860226] MCE: In-kernel MCE decoding enabled. |
| [ 8.882481] acpi-cpufreq: overriding BIOS provided _PSD data |
| [ 8.892022] kvm: Nested Virtualization enabled |
| [ 8.896587] kvm: Nested Paging enabled |
| [ 8.901227] AMD64 EDAC driver v3.4.0 |
| [ 8.905067] EDAC amd64: DRAM ECC enabled. |
| [ 8.909193] EDAC amd64: F10h detected (node 0). |
| [ 8.913909] EDAC MC: DCT0 chip selects: |
| [ 8.913921] EDAC amd64: MC: 0: 0MB 1: 0MB |
| [ 8.918640] EDAC amd64: MC: 2: 0MB 3: 0MB |
| [ 8.923464] EDAC amd64: MC: 4: 0MB 5: 0MB |
| [ 8.928185] EDAC amd64: MC: 6: 1024MB 7: 1024MB |
| [ 8.932927] EDAC MC: DCT1 chip selects: |
| [ 8.932929] EDAC amd64: MC: 0: 0MB 1: 0MB |
| [ 8.937651] EDAC amd64: MC: 2: 0MB 3: 0MB |
| [ 8.942395] EDAC amd64: MC: 4: 0MB 5: 0MB |
| [ 8.947118] EDAC amd64: MC: 6: 1024MB 7: 1024MB |
| [ 8.951849] EDAC amd64: using x4 syndromes. |
| [ 8.956053] EDAC amd64: MCT channel count: 2 |
| [ 8.960452] EDAC amd64: CS6: Registered DDR2 RAM |
| [ 8.965107] EDAC amd64: CS7: Registered DDR2 RAM |
| [ 8.970178] EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT) |
| [ 8.981128] EDAC amd64: DRAM ECC enabled. |
| [ 8.986476] EDAC amd64: F10h detected (node 1). |
| [ 8.991960] EDAC MC: DCT0 chip selects: |
| [ 8.991964] EDAC amd64: MC: 0: 1024MB 1: 0MB |
| [ 8.996677] EDAC amd64: MC: 2: 0MB 3: 0MB |
| [ 9.001386] EDAC amd64: MC: 4: 0MB 5: 0MB |
| [ 9.006100] EDAC amd64: MC: 6: 0MB 7: 0MB |
| [ 9.010814] EDAC MC: DCT1 chip selects: |
| [ 9.010816] EDAC amd64: MC: 0: 0MB 1: 0MB |
| [ 9.015529] EDAC amd64: MC: 2: 0MB 3: 0MB |
| [ 9.020232] EDAC amd64: MC: 4: 0MB 5: 0MB |
| [ 9.024935] EDAC amd64: MC: 6: 0MB 7: 0MB |
| [ 9.029643] EDAC amd64: using x4 syndromes. |
| [ 9.033826] EDAC amd64: MCT channel count: 1 |
| [ 9.038151] EDAC amd64: CS0: Registered DDR2 RAM |
| [ 9.043008] EDAC MC1: Giving out device to module amd64_edac controller F10h: DEV 0000:00:19.2 (INTERRUPT) |
| [ 9.052802] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED) |
| [ 40.045896] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS***** |