blob: 0fe3cb6704c583853b0be99f1109760c73bf5c62 [file] [log] [blame]
[ 0.000000] Linux version 4.11.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #1 SMP Debian 4.11.6-1 (2017-06-19)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.11.0-1-amd64 root=UUID=f545d1ea-3103-4100-8a85-54db5c9634ad ro quiet iomem=relaxed
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16
[ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff0efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bff0f000-0x00000000bfffffff] type 16
[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000ce9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000042f5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: LENOVO 23255A9/23255A9, BIOS CBET4000 4.6-938-gb08d73b845 08/01/2017
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x42f600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-back
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0C0000000 mask FE0000000 uncachable
[ 0.000000] 1 base 0E0000000 mask FF0000000 write-combining
[ 0.000000] 2 base 0F0000000 mask FF0000000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: last_pfn = 0xbff0f max_arch_pfn = 0x400000000
[ 0.000000] Base memory trampoline at [ffff91f000099000] 99000 size 24576
[ 0.000000] BRK [0x395741000, 0x395741fff] PGTABLE
[ 0.000000] BRK [0x395742000, 0x395742fff] PGTABLE
[ 0.000000] BRK [0x395743000, 0x395743fff] PGTABLE
[ 0.000000] BRK [0x395744000, 0x395744fff] PGTABLE
[ 0.000000] BRK [0x395745000, 0x395745fff] PGTABLE
[ 0.000000] BRK [0x395746000, 0x395746fff] PGTABLE
[ 0.000000] BRK [0x395747000, 0x395747fff] PGTABLE
[ 0.000000] BRK [0x395748000, 0x395748fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x35789000-0x36bbbfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F2030 000024 (v02 CORE )
[ 0.000000] ACPI: XSDT 0x00000000BFF210E0 00005C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: FACP 0x00000000BFF24790 0000F4 (v04 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: DSDT 0x00000000BFF21280 00350F (v02 COREv4 COREBOOT 20110725 INTL 20161222)
[ 0.000000] ACPI: FACS 0x00000000BFF21240 000040
[ 0.000000] ACPI: FACS 0x00000000BFF21240 000040
[ 0.000000] ACPI: SSDT 0x00000000BFF24890 00189A (v02 CORE COREBOOT 0000002A CORE 0000002A)
[ 0.000000] ACPI: MCFG 0x00000000BFF26130 00003C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: TCPA 0x00000000BFF26170 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: APIC 0x00000000BFF261B0 00006C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: DMAR 0x00000000BFF26220 0000A8 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: HPET 0x00000000BFF282D0 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000042f5fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x42f5ef000-0x42f5f3fff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000042f5fffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009ffff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000bff0efff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000042f5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000042f5fffff]
[ 0.000000] On node 0 totalpages: 4125870
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 22 pages reserved
[ 0.000000] DMA zone: 3999 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12221 pages used for memmap
[ 0.000000] DMA32 zone: 782095 pages, LIFO batch:31
[ 0.000000] Normal zone: 52184 pages used for memmap
[ 0.000000] Normal zone: 3339776 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics memory at 0x00000000c0a00000-0x00000000ce9fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x508
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbff0f000-0xbfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xce9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcea00000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfed3ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed8ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfed91fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed92000-0xffffffff]
[ 0.000000] e820: [mem 0xcea00000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 37 pages/cpu @ffff91f42f200000 s111512 r8192 d31848 u524288
[ 0.000000] pcpu-alloc: s111512 r8192 d31848 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 4061379
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.11.0-1-amd64 root=UUID=f545d1ea-3103-4100-8a85-54db5c9634ad ro quiet iomem=relaxed
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 16142320K/16503480K available (6464K kernel code, 1175K rwdata, 2788K rodata, 1436K init, 684K bss, 361160K reserved, 0K cma-reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:33024 nr_irqs:456 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 2593.987 MHz processor
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5187.97 BogoMIPS (lpj=10375948)
[ 0.004000] pid_max: default: 32768 minimum: 301
[ 0.004000] ACPI: Core revision 20170119
[ 0.009548] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.009588] Security Framework initialized
[ 0.009589] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.009594] AppArmor: AppArmor disabled by boot time parameter
[ 0.010313] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.014033] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.015735] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.015748] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.015982] CPU: Physical Processor ID: 0
[ 0.015983] CPU: Processor Core ID: 0
[ 0.016007] mce: CPU supports 7 MCE banks
[ 0.016014] CPU0: Thermal monitoring enabled (TM1)
[ 0.016023] process: using mwait in idle threads
[ 0.016025] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.016026] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.016132] Freeing SMP alternatives memory: 24K
[ 0.017298] ftrace: allocating 25929 entries in 102 pages
[ 0.024071] smpboot: Max logical packages: 2
[ 0.024076] DMAR: Host address width 36
[ 0.024078] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.024086] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[ 0.024086] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.024090] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[ 0.024091] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.024092] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.024093] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.024367] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.024368] x2apic enabled
[ 0.024373] Switched APIC routing to cluster x2apic.
[ 0.024830] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.063768] TSC deadline timer enabled
[ 0.063771] smpboot: CPU0: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[ 0.063846] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.063865] ... version: 3
[ 0.063866] ... bit width: 48
[ 0.063866] ... generic registers: 4
[ 0.063867] ... value mask: 0000ffffffffffff
[ 0.063867] ... max period: 00007fffffffffff
[ 0.063868] ... fixed-purpose events: 3
[ 0.063868] ... event mask: 000000070000000f
[ 0.064000] smp: Bringing up secondary CPUs ...
[ 0.064000] x86: Booting SMP configuration:
[ 0.064000] .... node #0, CPUs: #1
[ 0.142025] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.142025] #2 #3
[ 0.302021] smp: Brought up 1 node, 4 CPUs
[ 0.302021] smpboot: Total of 4 processors activated (20755.72 BogoMIPS)
[ 0.304109] sched_clock: Marking stable (304000000, 0)->(305604848, -1604848)
[ 0.304500] devtmpfs: initialized
[ 0.304551] x86/mm: Memory block size: 128MB
[ 0.307420] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.307428] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.307484] pinctrl core: initialized pinctrl subsystem
[ 0.307583] NET: Registered protocol family 16
[ 0.307753] cpuidle: using governor ladder
[ 0.307775] cpuidle: using governor menu
[ 0.307777] PCCT header not found.
[ 0.307798] ACPI: bus type PCI registered
[ 0.307799] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.307856] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.307858] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.307866] PCI: Using configuration type 1 for base access
[ 0.307895] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.308704] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.308887] ACPI: Added _OSI(Module Device)
[ 0.308888] ACPI: Added _OSI(Processor Device)
[ 0.308889] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.308890] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.309004] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.310935] ACPI : EC: EC started
[ 0.310935] ACPI : EC: interrupt blocked
[ 0.310978] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
[ 0.310979] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.310980] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions
[ 0.310981] ACPI: Interpreter enabled
[ 0.310997] ACPI: (supports S0 S3 S4 S5)
[ 0.310997] ACPI: Using IOAPIC for interrupt routing
[ 0.311014] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.314700] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.314704] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.314748] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.314756] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.314803] acpi PNP0A08:00: ignoring host bridge window [mem 0x000c4000-0x000c7fff window] (conflicts with Video ROM [mem 0x000c0000-0x000c67ff])
[ 0.314936] PCI host bridge to bus 0000:00
[ 0.314938] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.314939] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.314940] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.314941] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.314942] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.314943] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.314944] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.314945] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.314946] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.314947] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.314948] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.314949] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.314950] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.314951] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.314952] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[ 0.314953] pci_bus 0000:00: root bus resource [mem 0xcea00000-0xf7ffffff window]
[ 0.314954] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[ 0.314955] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.314962] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.315042] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 0.315051] pci 0000:00:02.0: reg 0x10: [mem 0xf1000000-0xf13fffff 64bit]
[ 0.315057] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.315061] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
[ 0.315129] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000
[ 0.315136] pci 0000:00:04.0: reg 0x10: [mem 0xf1630000-0xf1637fff 64bit]
[ 0.315223] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.315243] pci 0000:00:14.0: reg 0x10: [mem 0xf1620000-0xf162ffff 64bit]
[ 0.315311] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.315344] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.315405] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.315484] pci 0000:00:16.0: reg 0x10: [mem 0xf1641000-0xf164100f 64bit]
[ 0.315816] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.315903] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[ 0.315917] pci 0000:00:19.0: reg 0x10: [mem 0xf1600000-0xf161ffff]
[ 0.315926] pci 0000:00:19.0: reg 0x14: [mem 0xf163c000-0xf163cfff]
[ 0.315934] pci 0000:00:19.0: reg 0x18: [io 0x3040-0x305f]
[ 0.315992] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.316049] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.316065] pci 0000:00:1a.0: reg 0x10: [mem 0xf163e000-0xf163e3ff]
[ 0.316148] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.316182] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.316213] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.316230] pci 0000:00:1b.0: reg 0x10: [mem 0xf1638000-0xf163bfff 64bit]
[ 0.316302] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.316340] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.316374] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.316500] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.316578] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 0.316703] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.316780] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[ 0.316907] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.316984] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.317001] pci 0000:00:1d.0: reg 0x10: [mem 0xf163f000-0xf163f3ff]
[ 0.317083] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.317116] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.317147] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100
[ 0.317308] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.317324] pci 0000:00:1f.2: reg 0x10: [io 0x3080-0x3087]
[ 0.317332] pci 0000:00:1f.2: reg 0x14: [io 0x3090-0x3093]
[ 0.317340] pci 0000:00:1f.2: reg 0x18: [io 0x3088-0x308f]
[ 0.317348] pci 0000:00:1f.2: reg 0x1c: [io 0x3094-0x3097]
[ 0.317356] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
[ 0.317364] pci 0000:00:1f.2: reg 0x24: [mem 0xf163d000-0xf163d7ff]
[ 0.317408] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.317465] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.317481] pci 0000:00:1f.3: reg 0x10: [mem 0xf1640000-0xf16400ff 64bit]
[ 0.317501] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.317662] pci 0000:01:00.0: [1180:e823] type 00 class 0x080501
[ 0.317693] pci 0000:01:00.0: MMC controller base frequency changed to 50Mhz.
[ 0.317728] pci 0000:01:00.0: reg 0x10: [mem 0xf1400000-0xf14000ff]
[ 0.318034] pci 0000:01:00.0: supports D1 D2
[ 0.318035] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.329348] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.329359] pci 0000:00:1c.0: bridge window [mem 0xf1400000-0xf14fffff]
[ 0.329473] pci 0000:02:00.0: [168c:0030] type 00 class 0x028000
[ 0.329515] pci 0000:02:00.0: reg 0x10: [mem 0xf1500000-0xf151ffff 64bit]
[ 0.329606] pci 0000:02:00.0: reg 0x30: [mem 0xf1520000-0xf152ffff pref]
[ 0.329721] pci 0000:02:00.0: supports D1
[ 0.329722] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
[ 0.341349] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.341360] pci 0000:00:1c.1: bridge window [mem 0xf1500000-0xf15fffff]
[ 0.341458] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.341462] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.341467] pci 0000:00:1c.2: bridge window [mem 0xf0800000-0xf0ffffff]
[ 0.341475] pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf07fffff 64bit pref]
[ 0.341586] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 12 14 15) *11
[ 0.341630] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.341672] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12 14 15) *11
[ 0.341713] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.341754] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12 14 15) *11
[ 0.341794] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.341834] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12 14 15) *11
[ 0.341874] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.342402] ACPI: Enabled 1 GPEs in block 00 to 3F
[ 0.342459] ACPI : EC: interrupt unblocked
[ 0.342465] ACPI : EC: event unblocked
[ 0.342472] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.342473] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
[ 0.342536] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.342538] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.342541] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.342541] vgaarb: loaded
[ 0.342603] PCI: Using ACPI for IRQ routing
[ 0.344073] PCI: pci_cache_line_size set to 64 bytes
[ 0.344156] e820: reserve RAM buffer [mem 0xbff0f000-0xbfffffff]
[ 0.344157] e820: reserve RAM buffer [mem 0x42f600000-0x42fffffff]
[ 0.344278] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.344283] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.346305] clocksource: Switched to clocksource hpet
[ 0.354199] VFS: Disk quotas dquot_6.6.0
[ 0.354226] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.354299] pnp: PnP ACPI init
[ 0.354399] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.354400] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.354401] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.354402] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.354404] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.354405] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.354406] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.354408] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.354409] system 00:00: [mem 0x20000000-0x201fffff] could not be reserved
[ 0.354410] system 00:00: [mem 0x40000000-0x401fffff] could not be reserved
[ 0.354413] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.354849] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.354851] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.354885] system 00:02: [io 0x0500-0x057f] has been reserved
[ 0.354886] system 00:02: [io 0x0480-0x04bf] has been reserved
[ 0.354888] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.354905] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.354932] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.354955] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.354978] pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active)
[ 0.354993] pnp: PnP ACPI: found 7 devices
[ 0.361064] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.361106] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.361113] pci 0000:00:1c.0: bridge window [mem 0xf1400000-0xf14fffff]
[ 0.361125] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.361131] pci 0000:00:1c.1: bridge window [mem 0xf1500000-0xf15fffff]
[ 0.361141] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.361144] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.361150] pci 0000:00:1c.2: bridge window [mem 0xf0800000-0xf0ffffff]
[ 0.361155] pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf07fffff 64bit pref]
[ 0.361163] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.361165] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.361166] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.361167] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.361168] pci_bus 0000:00: resource 8 [mem 0x000c8000-0x000cbfff window]
[ 0.361169] pci_bus 0000:00: resource 9 [mem 0x000cc000-0x000cffff window]
[ 0.361170] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window]
[ 0.361171] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window]
[ 0.361172] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window]
[ 0.361173] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window]
[ 0.361174] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window]
[ 0.361175] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window]
[ 0.361176] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window]
[ 0.361177] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window]
[ 0.361178] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff window]
[ 0.361179] pci_bus 0000:00: resource 19 [mem 0xcea00000-0xf7ffffff window]
[ 0.361180] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed44fff window]
[ 0.361181] pci_bus 0000:01: resource 1 [mem 0xf1400000-0xf14fffff]
[ 0.361182] pci_bus 0000:02: resource 1 [mem 0xf1500000-0xf15fffff]
[ 0.361183] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.361184] pci_bus 0000:03: resource 1 [mem 0xf0800000-0xf0ffffff]
[ 0.361185] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf07fffff 64bit pref]
[ 0.361272] NET: Registered protocol family 2
[ 0.361424] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.361615] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.361729] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.361763] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.361800] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.361876] NET: Registered protocol family 1
[ 0.361891] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.362477] PCI: CLS 64 bytes, default 64
[ 0.362523] Unpacking initramfs...
[ 0.691756] Freeing initrd memory: 20684K
[ 0.691845] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.691847] software IO TLB [mem 0xbbf0f000-0xbff0f000] (64MB) mapped at [ffff91f0bbf0f000-ffff91f0bff0efff]
[ 0.692166] audit: initializing netlink subsys (disabled)
[ 0.692211] audit: type=2000 audit(1501662548.688:1): state=initialized audit_enabled=0 res=1
[ 0.692492] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[ 0.692532] zbud: loaded
[ 0.693291] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 0.693322] io scheduler noop registered
[ 0.693323] io scheduler deadline registered
[ 0.693336] io scheduler cfq registered (default)
[ 0.693337] io scheduler mq-deadline registered
[ 0.694067] pcieport 0000:00:1c.0: Signaling PME with IRQ 26
[ 0.694087] pcieport 0000:00:1c.1: Signaling PME with IRQ 27
[ 0.694106] pcieport 0000:00:1c.2: Signaling PME with IRQ 28
[ 0.694127] pciehp 0000:00:1c.2:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[ 0.694166] efifb: probing for efifb
[ 0.694178] efifb: framebuffer at 0xe0000000, using 4160k, total 4160k
[ 0.694179] efifb: mode is 1376x768x32, linelength=5504, pages=1
[ 0.694179] efifb: scrolling: redraw
[ 0.694180] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.696419] Console: switching to colour frame buffer device 172x48
[ 0.698561] fb0: EFI VGA frame buffer device
[ 0.698567] intel_idle: MWAIT substates: 0x21120
[ 0.698568] intel_idle: v0.4.1 model 0x3A
[ 0.698694] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.699028] GHES: HEST is not enabled!
[ 0.699077] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.699410] Linux agpgart interface v0.103
[ 0.714411] tpm_tis 00:06: 1.2 TPM (device-id 0x0, rev-id 78)
[ 0.794716] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 0.794717] AMD IOMMUv2 functionality not available on this system
[ 0.795185] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.796928] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.796933] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.797045] mousedev: PS/2 mouse device common for all mice
[ 0.797083] rtc_cmos 00:03: RTC can wake from S4
[ 0.797207] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.797236] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.797243] intel_pstate: Intel P-state driver initializing
[ 0.797593] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.797973] NET: Registered protocol family 10
[ 0.798375] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.798500] Segment Routing with IPv6
[ 0.798531] mip6: Mobile IPv6
[ 0.798534] NET: Registered protocol family 17
[ 0.798539] mpls_gso: MPLS GSO support
[ 0.799012] microcode: sig=0x306a9, pf=0x10, revision=0x1b
[ 0.799162] microcode: Microcode Update Driver: v2.2.
[ 0.799347] registered taskstats version 1
[ 0.799373] zswap: loaded using pool lzo/zbud
[ 0.958906] rtc_cmos 00:03: setting system clock to 2017-08-02 08:29:09 UTC (1501662549)
[ 0.958957] PM: Hibernation image not present or could not be loaded.
[ 0.961139] Freeing unused kernel memory: 1436K
[ 0.961141] Write protecting the kernel read-only data: 12288k
[ 0.961930] Freeing unused kernel memory: 1712K
[ 0.967014] Freeing unused kernel memory: 1308K
[ 0.970041] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.063913] pps_core: LinuxPPS API ver. 1 registered
[ 1.063914] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 1.064183] PTP clock support registered
[ 1.064448] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 1.064654] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.064655] ACPI: Thermal Zone [THM0] (62 C)
[ 1.065319] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.065320] ACPI: Thermal Zone [THM1] (27 C)
[ 1.065341] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 1.065342] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.065419] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 1.065435] ACPI: bus type USB registered
[ 1.065455] usbcore: registered new interface driver usbfs
[ 1.065463] usbcore: registered new interface driver hub
[ 1.065480] usbcore: registered new device driver usb
[ 1.065696] sdhci: Secure Digital Host Controller Interface driver
[ 1.065697] sdhci: Copyright(c) Pierre Ossman
[ 1.065955] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.066029] sdhci-pci 0000:01:00.0: SDHCI controller found [1180:e823] (rev 4)
[ 1.066187] ehci-pci: EHCI PCI platform driver
[ 1.066425] mmc0: SDHCI controller on PCI [0000:01:00.0] using DMA
[ 1.070559] SCSI subsystem initialized
[ 1.071526] libata version 3.00 loaded.
[ 1.078002] AVX version of gcm_enc/dec engaged.
[ 1.078004] AES CTR mode by8 optimization enabled
[ 1.207982] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[ 1.333049] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 3c:97:0e:b6:6c:5b
[ 1.333050] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 1.333103] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
[ 1.333322] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.333328] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.333341] ehci-pci 0000:00:1a.0: debug port 2
[ 1.337263] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.337283] ehci-pci 0000:00:1a.0: irq 21, io mem 0xf163e000
[ 1.350412] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.350503] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.350506] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.350508] usb usb1: Product: EHCI Host Controller
[ 1.350509] usb usb1: Manufacturer: Linux 4.11.0-1-amd64 ehci_hcd
[ 1.350511] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.350853] hub 1-0:1.0: USB hub found
[ 1.350868] hub 1-0:1.0: 3 ports detected
[ 1.351277] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.351282] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.351295] ehci-pci 0000:00:1d.0: debug port 2
[ 1.355207] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.355223] ehci-pci 0000:00:1d.0: irq 19, io mem 0xf163f000
[ 1.370431] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.370529] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.370531] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.370532] usb usb2: Product: EHCI Host Controller
[ 1.370534] usb usb2: Manufacturer: Linux 4.11.0-1-amd64 ehci_hcd
[ 1.370536] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.370848] hub 2-0:1.0: USB hub found
[ 1.370861] hub 2-0:1.0: 3 ports detected
[ 1.371393] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.371407] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 1.372534] xhci_hcd 0000:00:14.0: hcc params 0x200071a1 hci version 0x100 quirks 0x0000b930
[ 1.372545] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.372729] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.372731] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.372733] usb usb3: Product: xHCI Host Controller
[ 1.372735] usb usb3: Manufacturer: Linux 4.11.0-1-amd64 xhci-hcd
[ 1.372736] usb usb3: SerialNumber: 0000:00:14.0
[ 1.373032] hub 3-0:1.0: USB hub found
[ 1.373048] hub 3-0:1.0: 4 ports detected
[ 1.373219] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.373225] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 1.373277] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.373279] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.373281] usb usb4: Product: xHCI Host Controller
[ 1.373283] usb usb4: Manufacturer: Linux 4.11.0-1-amd64 xhci-hcd
[ 1.373284] usb usb4: SerialNumber: 0000:00:14.0
[ 1.373586] hub 4-0:1.0: USB hub found
[ 1.373600] hub 4-0:1.0: 4 ports detected
[ 1.373830] ahci 0000:00:1f.2: version 3.0
[ 1.374166] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 1.384301] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl SATA mode
[ 1.384306] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst
[ 1.385757] scsi host0: ahci
[ 1.386048] scsi host1: ahci
[ 1.386266] scsi host2: ahci
[ 1.386540] scsi host3: ahci
[ 1.386715] scsi host4: ahci
[ 1.386913] scsi host5: ahci
[ 1.387015] ata1: SATA max UDMA/133 abar m2048@0xf163d000 port 0xf163d100 irq 31
[ 1.387018] ata2: SATA max UDMA/133 abar m2048@0xf163d000 port 0xf163d180 irq 31
[ 1.387021] ata3: SATA max UDMA/133 abar m2048@0xf163d000 port 0xf163d200 irq 31
[ 1.387023] ata4: DUMMY
[ 1.387024] ata5: DUMMY
[ 1.387025] ata6: DUMMY
[ 1.387387] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 1.678413] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.698415] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.698511] tsc: Refined TSC clocksource calibration: 2594.106 MHz
[ 1.698520] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x25647bfab01, max_idle_ns: 440795211785 ns
[ 1.701127] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.701877] ata1.00: ATA-9: WDC WD10SPCX-08HWST0, 01.01A01, max UDMA/133
[ 1.701880] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 1.702755] ata1.00: configured for UDMA/133
[ 1.703204] scsi 0:0:0:0: Direct-Access ATA WDC WD10SPCX-08H 1A01 PQ: 0 ANSI: 5
[ 1.826800] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.826803] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.827201] hub 1-1:1.0: USB hub found
[ 1.827372] hub 1-1:1.0: 6 ports detected
[ 1.831209] psmouse serio1: synaptics: queried max coordinates: x [..5768], y [..5062]
[ 1.846801] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.846805] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.847193] hub 2-1:1.0: USB hub found
[ 1.847404] hub 2-1:1.0: 8 ports detected
[ 1.861150] psmouse serio1: synaptics: queried min coordinates: x [1174..], y [790..]
[ 1.919754] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd002a3/0x940300/0x123800/0x0, board id: 1611, fw id: 1099905
[ 1.919766] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[ 1.957044] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
[ 2.001259] random: fast init done
[ 2.057213] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.114435] usb 1-1.4: new full-speed USB device number 3 using ehci-pci
[ 2.134433] usb 2-1.6: new full-speed USB device number 3 using ehci-pci
[ 2.227544] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=217f
[ 2.227547] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.227550] usb 1-1.4: Product: Broadcom Bluetooth Device
[ 2.227551] usb 1-1.4: Manufacturer: Broadcom Corp
[ 2.227553] usb 1-1.4: SerialNumber: 7CE9D3B7FC24
[ 2.252657] usb 2-1.6: New USB device found, idVendor=08e6, idProduct=34ec
[ 2.252661] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.252663] usb 2-1.6: Product: GemPC Express
[ 2.252665] usb 2-1.6: Manufacturer: Gemplus
[ 2.306439] usb 1-1.6: new high-speed USB device number 4 using ehci-pci
[ 2.373192] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.375507] ata3.00: ATA-8: LITEONIT LSS-32L6G-HP, DS51704, max UDMA/133
[ 2.375510] ata3.00: 62533296 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 2.376041] ata3.00: configured for UDMA/133
[ 2.376296] scsi 2:0:0:0: Direct-Access ATA LITEONIT LSS-32L 704 PQ: 0 ANSI: 5
[ 2.418445] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 2.418451] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 2.418501] sd 0:0:0:0: [sda] Write Protect is off
[ 2.418506] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.418562] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.418573] sd 2:0:0:0: [sdb] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB)
[ 2.418602] sd 2:0:0:0: [sdb] Write Protect is off
[ 2.418606] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.418656] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.420989] sdb: sdb1 sdb2 sdb3 sdb5 sdb6 sdb7
[ 2.421856] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 2.422243] usb 1-1.6: New USB device found, idVendor=04f2, idProduct=b2ea
[ 2.422244] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.422245] usb 1-1.6: Product: Integrated Camera
[ 2.422246] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd.
[ 2.562818] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8
[ 2.563284] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.586098] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 2.722616] clocksource: Switched to clocksource tsc
[ 2.780544] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input3
[ 3.814469] raid6: sse2x1 gen() 8675 MB/s
[ 3.882471] raid6: sse2x1 xor() 6923 MB/s
[ 3.950478] raid6: sse2x2 gen() 11085 MB/s
[ 4.018478] raid6: sse2x2 xor() 7981 MB/s
[ 4.086481] raid6: sse2x4 gen() 13096 MB/s
[ 4.154484] raid6: sse2x4 xor() 9715 MB/s
[ 4.154485] raid6: using algorithm sse2x4 gen() 13096 MB/s
[ 4.154486] raid6: .... xor() 9715 MB/s, rmw enabled
[ 4.154486] raid6: using ssse3x2 recovery algorithm
[ 4.154763] xor: automatically using best checksumming function avx
[ 4.154915] async_tx: api initialized (async)
[ 4.167554] Btrfs loaded, crc32c=crc32c-intel
[ 4.891007] PM: Starting manual resume from disk
[ 4.891013] PM: Hibernation image partition 8:2 present
[ 4.891014] PM: Looking for hibernation image.
[ 4.891261] PM: Image not found (code -22)
[ 4.891263] PM: Hibernation image not present or could not be loaded.
[ 4.993854] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[ 5.123571] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 5.127854] systemd[1]: systemd 234 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
[ 5.127955] systemd[1]: Detected architecture x86-64.
[ 5.128109] systemd[1]: Set hostname to <universi-mcbk52>.
[ 5.187652] random: crng init done
[ 5.274656] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 5.274737] systemd[1]: Listening on Journal Socket (/dev/log).
[ 5.274857] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 5.274870] systemd[1]: Reached target System Time Synchronized.
[ 5.274900] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 5.274930] systemd[1]: Listening on udev Control Socket.
[ 5.274968] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 5.296708] RPC: Registered named UNIX socket transport module.
[ 5.296709] RPC: Registered udp transport module.
[ 5.296710] RPC: Registered tcp transport module.
[ 5.296710] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 5.302841] EXT4-fs (sdb5): re-mounted. Opts: discard,user_xattr,errors=remount-ro
[ 5.319799] lp: driver loaded but no devices found
[ 5.323216] ppdev: user-space parallel port driver
[ 5.428732] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1f/PNP0C09:00/PNP0C0E:00/input/input4
[ 5.428737] ACPI: Sleep Button [SLPB]
[ 5.428904] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1f/PNP0C09:00/PNP0C0D:00/input/input5
[ 5.428982] ACPI: Lid Switch [LID]
[ 5.429036] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 5.429040] ACPI: Power Button [PWRF]
[ 5.438796] ACPI: AC Adapter [AC] (on-line)
[ 5.447063] ACPI: Battery Slot [BAT0] (battery present)
[ 5.447164] ACPI: Battery Slot [BAT1] (battery absent)
[ 5.475052] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 5.476124] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20170119/utaddress-247)
[ 5.476129] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.476132] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20170119/utaddress-247)
[ 5.476135] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.476136] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20170119/utaddress-247)
[ 5.476139] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.476139] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20170119/utaddress-247)
[ 5.476142] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.476143] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 5.478733] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.479174] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 5.479249] Non-volatile memory driver v1.3
[ 5.491212] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[ 5.491213] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 5.491214] thinkpad_acpi: ThinkPad BIOS CBET4000 4.6-938-gb08d73b845, EC G2HT35WW-3.22
[ 5.491215] thinkpad_acpi: Lenovo ThinkPad X230, model 23255A9
[ 5.494168] thinkpad_hwmon thinkpad_hwmon: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 5.494358] thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode
[ 5.494434] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 5.494435] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 5.496952] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 5.497845] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 5.498900] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input7
[ 5.503587] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 5.516152] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 5.516154] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 5.516154] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 5.516155] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ 5.525225] ath: phy0: Killer Wireless card detected
[ 5.536743] ath: phy0: ASPM enabled: 0x43
[ 5.536745] ath: EEPROM regdomain: 0x60
[ 5.536746] ath: EEPROM indicates we should expect a direct regpair map
[ 5.536748] ath: Country alpha2 being used: 00
[ 5.536748] ath: Regpair used: 0x60
[ 5.540117] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 5.540440] ieee80211 phy0: Atheros AR9300 Rev:3 mem=0xffffad52c25c0000, irq=17
[ 5.783450] EXT4-fs (sdb3): mounting ext2 file system using the ext4 subsystem
[ 5.784830] EXT4-fs (sdb3): mounted filesystem without journal. Opts: user_xattr
[ 5.890044] EXT4-fs (sdb7): mounted filesystem with ordered data mode. Opts: discard,user_xattr
[ 5.988857] iTCO_vendor_support: vendor-support=0
[ 5.989263] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 5.989302] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560)
[ 5.989549] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.041765] Adding 8389628k swap on /dev/sda2. Priority:-1 extents:1 across:8389628k FS
[ 7.017414] media: Linux media interface: v0.10
[ 7.023558] Bluetooth: Core ver 2.22
[ 7.023573] NET: Registered protocol family 31
[ 7.023574] Bluetooth: HCI device and connection manager initialized
[ 7.023577] Bluetooth: HCI socket layer initialized
[ 7.023580] Bluetooth: L2CAP socket layer initialized
[ 7.023587] Bluetooth: SCO socket layer initialized
[ 7.024252] Linux video capture interface: v2.00
[ 7.099157] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b2ea)
[ 7.099607] usbcore: registered new interface driver btusb
[ 7.100941] uvcvideo 1-1.6:1.0: Entity type for entity Extension 4 was not initialized!
[ 7.100947] uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized!
[ 7.100951] uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized!
[ 7.100955] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized!
[ 7.101146] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input9
[ 7.101270] usbcore: registered new interface driver uvcvideo
[ 7.101272] USB Video Class driver (1.1.1)
[ 7.522680] mei_me 0000:00:16.0: wait hw ready failed
[ 7.522727] mei_me 0000:00:16.0: hw_start failed ret = -62
[ 7.522781] mei_me 0000:00:16.0: H_RST is set = 0x80000015
[ 9.538748] mei_me 0000:00:16.0: wait hw ready failed
[ 9.538800] mei_me 0000:00:16.0: hw_start failed ret = -62
[ 9.538872] mei_me 0000:00:16.0: H_RST is set = 0x80000015
[ 9.559214] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: user_xattr
[ 9.600747] EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: discard,user_xattr
[ 9.605907] systemd-journald[297]: Received request to flush runtime journal from PID 1
[ 10.039368] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: user_xattr
[ 10.161870] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: user_xattr
[ 10.874176] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: user_xattr
[ 11.554856] mei_me 0000:00:16.0: wait hw ready failed
[ 11.554907] mei_me 0000:00:16.0: hw_start failed ret = -62
[ 11.554956] mei_me 0000:00:16.0: reset: reached maximal consecutive resets: disabling the device
[ 11.555021] mei_me 0000:00:16.0: reset failed ret = -19
[ 11.555061] mei_me 0000:00:16.0: link layer initialization failed.
[ 11.555109] mei_me 0000:00:16.0: init hw failure.
[ 11.555217] mei_me 0000:00:16.0: initialization failed.
[ 11.555901] [drm] Memory usable by graphics device = 2048M
[ 11.555905] checking generic (e0000000 410000) vs hw (e0000000 10000000)
[ 11.555907] fb: switching to inteldrmfb from EFI VGA
[ 11.556168] Console: switching to colour dummy device 80x25
[ 11.556291] [drm] Replacing VGA console driver
[ 11.614980] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 11.614982] [drm] Driver supports precise vblank timestamp query.
[ 11.615272] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 11.686447] [drm] Initialized i915 1.6.0 20170123 for 0000:00:02.0 on minor 0
[ 11.686593] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 11.687933] acpi device:03: registered as cooling_device4
[ 11.687992] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10
[ 11.688878] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: user_xattr
[ 11.702597] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 11.702598] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 11.702599] snd_hda_codec_realtek hdaudioC0D0: hp_outs=2 (0x15/0x1b/0x0/0x0/0x0)
[ 11.702600] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 11.702601] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 11.702602] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 11.702603] snd_hda_codec_realtek hdaudioC0D0: Dock Mic=0x19
[ 11.702604] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 11.767914] intel_rapl: Found RAPL domain package
[ 11.767916] intel_rapl: Found RAPL domain core
[ 11.767916] intel_rapl: Found RAPL domain uncore
[ 12.103694] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 12.103735] fbcon: inteldrmfb (fb0) is primary device
[ 12.107807] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 12.110041] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 12.110103] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 12.110160] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 12.110216] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 12.110271] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 12.110327] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 12.110382] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[ 13.374288] Console: switching to colour frame buffer device 172x48
[ 13.395288] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 17.982402] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: user_xattr
[ 18.538613] nfc: nfc_init: NFC Core ver 0.1
[ 18.538634] NET: Registered protocol family 39
[ 18.549805] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 18.549806] Bluetooth: BNEP filters: protocol multicast
[ 18.549809] Bluetooth: BNEP socket layer initialized
[ 21.350039] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 21.611631] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 21.624204] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 21.634825] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 21.651248] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 21.948446] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 22.645599] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 22.658458] Ebtables v2.0 registered
[ 24.205527] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 24.205572] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 29.385531] Bluetooth: RFCOMM TTY layer initialized
[ 29.385537] Bluetooth: RFCOMM socket layer initialized
[ 29.385541] Bluetooth: RFCOMM ver 1.11
[ 40.239358] fuse init (API version 7.26)