blob: bbec698beb25bc5e0131496cacfef0cd98d23629 [file] [log] [blame]
[ 0.000000] Linux version 4.11.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #1 SMP Debian 4.11.6-1 (2017-06-19)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.11.0-1-amd64 root=UUID=f545d1ea-3103-4100-8a85-54db5c9634ad ro quiet iomem=relaxed
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16
[ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff0dfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bff0e000-0x00000000bfffffff] type 16
[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000ce9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022f5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: LENOVO 23255A9/23255A9, BIOS CBET4000 4.6-890-g3dcbb4541b 07/27/2017
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x22f600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-back
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0C0000000 mask FE0000000 uncachable
[ 0.000000] 1 base 0E0000000 mask FF0000000 write-combining
[ 0.000000] 2 base 0F0000000 mask FF0000000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: last_pfn = 0xbff0e max_arch_pfn = 0x400000000
[ 0.000000] Base memory trampoline at [ffff96d680099000] 99000 size 24576
[ 0.000000] BRK [0xbc541000, 0xbc541fff] PGTABLE
[ 0.000000] BRK [0xbc542000, 0xbc542fff] PGTABLE
[ 0.000000] BRK [0xbc543000, 0xbc543fff] PGTABLE
[ 0.000000] BRK [0xbc544000, 0xbc544fff] PGTABLE
[ 0.000000] BRK [0xbc545000, 0xbc545fff] PGTABLE
[ 0.000000] BRK [0xbc546000, 0xbc546fff] PGTABLE
[ 0.000000] BRK [0xbc547000, 0xbc547fff] PGTABLE
[ 0.000000] BRK [0xbc548000, 0xbc548fff] PGTABLE
[ 0.000000] BRK [0xbc549000, 0xbc549fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x35789000-0x36bbbfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0000 000024 (v02 CORE )
[ 0.000000] ACPI: XSDT 0x00000000BFF200E0 00005C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: FACP 0x00000000BFF23790 0000F4 (v04 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: DSDT 0x00000000BFF20280 00350F (v02 COREv4 COREBOOT 20110725 INTL 20161222)
[ 0.000000] ACPI: FACS 0x00000000BFF20240 000040
[ 0.000000] ACPI: FACS 0x00000000BFF20240 000040
[ 0.000000] ACPI: SSDT 0x00000000BFF23890 00189A (v02 CORE COREBOOT 0000002A CORE 0000002A)
[ 0.000000] ACPI: MCFG 0x00000000BFF25130 00003C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: TCPA 0x00000000BFF25170 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: APIC 0x00000000BFF251B0 00006C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: DMAR 0x00000000BFF25220 0000A8 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: HPET 0x00000000BFF272D0 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000022f5fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x22f5f8000-0x22f5fcfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000022f5fffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009ffff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000bff0dfff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000022f5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000022f5fffff]
[ 0.000000] On node 0 totalpages: 2028717
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 22 pages reserved
[ 0.000000] DMA zone: 3999 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12221 pages used for memmap
[ 0.000000] DMA32 zone: 782094 pages, LIFO batch:31
[ 0.000000] Normal zone: 19416 pages used for memmap
[ 0.000000] Normal zone: 1242624 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics memory at 0x00000000c0a00000-0x00000000ce9fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x508
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbff0e000-0xbfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xce9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcea00000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfed3ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed8ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfed91fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed92000-0xffffffff]
[ 0.000000] e820: [mem 0xcea00000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 37 pages/cpu @ffff96d8af200000 s111512 r8192 d31848 u524288
[ 0.000000] pcpu-alloc: s111512 r8192 d31848 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1996994
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.11.0-1-amd64 root=UUID=f545d1ea-3103-4100-8a85-54db5c9634ad ro quiet iomem=relaxed
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 7884820K/8114868K available (6464K kernel code, 1175K rwdata, 2788K rodata, 1436K init, 684K bss, 230048K reserved, 0K cma-reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:33024 nr_irqs:456 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 2594.008 MHz processor
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5188.01 BogoMIPS (lpj=10376032)
[ 0.004000] pid_max: default: 32768 minimum: 301
[ 0.004000] ACPI: Core revision 20170119
[ 0.009549] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.009591] Security Framework initialized
[ 0.009592] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.009598] AppArmor: AppArmor disabled by boot time parameter
[ 0.009966] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.011864] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.012748] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.012755] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.012988] CPU: Physical Processor ID: 0
[ 0.012989] CPU: Processor Core ID: 0
[ 0.012996] mce: CPU supports 7 MCE banks
[ 0.013003] CPU0: Thermal monitoring enabled (TM1)
[ 0.013012] process: using mwait in idle threads
[ 0.013015] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.013016] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.013120] Freeing SMP alternatives memory: 24K
[ 0.014249] ftrace: allocating 25929 entries in 102 pages
[ 0.020071] smpboot: Max logical packages: 2
[ 0.020076] DMAR: Host address width 36
[ 0.020077] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.020086] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[ 0.020087] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.020090] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[ 0.020091] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.020092] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.020093] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.020392] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.020393] x2apic enabled
[ 0.020399] Switched APIC routing to cluster x2apic.
[ 0.020855] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.060675] TSC deadline timer enabled
[ 0.060678] smpboot: CPU0: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[ 0.060752] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.060771] ... version: 3
[ 0.060772] ... bit width: 48
[ 0.060772] ... generic registers: 4
[ 0.060773] ... value mask: 0000ffffffffffff
[ 0.060773] ... max period: 00007fffffffffff
[ 0.060773] ... fixed-purpose events: 3
[ 0.060774] ... event mask: 000000070000000f
[ 0.061232] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.061249] smp: Bringing up secondary CPUs ...
[ 0.061333] x86: Booting SMP configuration:
[ 0.061334] .... node #0, CPUs: #1 #2 #3
[ 0.302020] smp: Brought up 1 node, 4 CPUs
[ 0.302020] smpboot: Total of 4 processors activated (20755.65 BogoMIPS)
[ 0.304108] sched_clock: Marking stable (304000000, 0)->(302508165, 1491835)
[ 0.304380] devtmpfs: initialized
[ 0.304430] x86/mm: Memory block size: 128MB
[ 0.306729] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.306737] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.306790] pinctrl core: initialized pinctrl subsystem
[ 0.306887] NET: Registered protocol family 16
[ 0.307053] cpuidle: using governor ladder
[ 0.307076] cpuidle: using governor menu
[ 0.307078] PCCT header not found.
[ 0.307099] ACPI: bus type PCI registered
[ 0.307100] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.307155] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.307156] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.307163] PCI: Using configuration type 1 for base access
[ 0.307192] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.307934] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.308121] ACPI: Added _OSI(Module Device)
[ 0.308122] ACPI: Added _OSI(Processor Device)
[ 0.308122] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.308123] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.308237] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.310158] ACPI : EC: EC started
[ 0.310159] ACPI : EC: interrupt blocked
[ 0.310201] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
[ 0.310202] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.310203] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions
[ 0.310204] ACPI: Interpreter enabled
[ 0.310219] ACPI: (supports S0 S3 S4 S5)
[ 0.310220] ACPI: Using IOAPIC for interrupt routing
[ 0.310237] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.313998] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.314002] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.314045] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.314053] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.314230] PCI host bridge to bus 0000:00
[ 0.314232] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.314233] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.314234] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.314235] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.314236] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.314237] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.314238] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.314239] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.314240] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.314241] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.314242] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.314243] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.314244] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.314245] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.314246] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.314247] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[ 0.314248] pci_bus 0000:00: root bus resource [mem 0xcea00000-0xf7ffffff window]
[ 0.314249] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[ 0.314250] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.314257] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.314334] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 0.314343] pci 0000:00:02.0: reg 0x10: [mem 0xf1000000-0xf13fffff 64bit]
[ 0.314348] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.314352] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
[ 0.314420] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000
[ 0.314428] pci 0000:00:04.0: reg 0x10: [mem 0xf1630000-0xf1637fff 64bit]
[ 0.314514] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.314534] pci 0000:00:14.0: reg 0x10: [mem 0xf1620000-0xf162ffff 64bit]
[ 0.314601] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.314634] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.314696] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.314774] pci 0000:00:16.0: reg 0x10: [mem 0xf1641000-0xf164100f 64bit]
[ 0.315106] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.315194] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[ 0.315209] pci 0000:00:19.0: reg 0x10: [mem 0xf1600000-0xf161ffff]
[ 0.315217] pci 0000:00:19.0: reg 0x14: [mem 0xf163c000-0xf163cfff]
[ 0.315225] pci 0000:00:19.0: reg 0x18: [io 0x3040-0x305f]
[ 0.315284] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.315343] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.315360] pci 0000:00:1a.0: reg 0x10: [mem 0xf163e000-0xf163e3ff]
[ 0.315442] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.315476] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.315509] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.315524] pci 0000:00:1b.0: reg 0x10: [mem 0xf1638000-0xf163bfff 64bit]
[ 0.315597] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.315634] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.315670] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.315796] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.315876] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 0.316001] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.316079] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[ 0.316207] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.316286] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.316303] pci 0000:00:1d.0: reg 0x10: [mem 0xf163f000-0xf163f3ff]
[ 0.316386] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.316420] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.316450] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100
[ 0.316603] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.316619] pci 0000:00:1f.2: reg 0x10: [io 0x3080-0x3087]
[ 0.316627] pci 0000:00:1f.2: reg 0x14: [io 0x3090-0x3093]
[ 0.316634] pci 0000:00:1f.2: reg 0x18: [io 0x3088-0x308f]
[ 0.316642] pci 0000:00:1f.2: reg 0x1c: [io 0x3094-0x3097]
[ 0.316651] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
[ 0.316659] pci 0000:00:1f.2: reg 0x24: [mem 0xf163d000-0xf163d7ff]
[ 0.316702] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.316757] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.316772] pci 0000:00:1f.3: reg 0x10: [mem 0xf1640000-0xf16400ff 64bit]
[ 0.316793] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.316953] pci 0000:01:00.0: [1180:e823] type 00 class 0x080501
[ 0.316984] pci 0000:01:00.0: MMC controller base frequency changed to 50Mhz.
[ 0.317020] pci 0000:01:00.0: reg 0x10: [mem 0xf1400000-0xf14000ff]
[ 0.317335] pci 0000:01:00.0: supports D1 D2
[ 0.317336] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.329345] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.329356] pci 0000:00:1c.0: bridge window [mem 0xf1400000-0xf14fffff]
[ 0.329470] pci 0000:02:00.0: [168c:0030] type 00 class 0x028000
[ 0.329511] pci 0000:02:00.0: reg 0x10: [mem 0xf1500000-0xf151ffff 64bit]
[ 0.329594] pci 0000:02:00.0: reg 0x30: [mem 0xf1520000-0xf152ffff pref]
[ 0.329727] pci 0000:02:00.0: supports D1
[ 0.329728] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
[ 0.341348] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.341359] pci 0000:00:1c.1: bridge window [mem 0xf1500000-0xf15fffff]
[ 0.341451] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.341455] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.341459] pci 0000:00:1c.2: bridge window [mem 0xf0800000-0xf0ffffff]
[ 0.341467] pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf07fffff 64bit pref]
[ 0.341577] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 12 14 15) *11
[ 0.341621] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.341662] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12 14 15) *11
[ 0.341702] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.341743] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12 14 15) *11
[ 0.341784] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.341824] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12 14 15) *11
[ 0.341864] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.342386] ACPI: Enabled 1 GPEs in block 00 to 3F
[ 0.342446] ACPI : EC: interrupt unblocked
[ 0.342452] ACPI : EC: event unblocked
[ 0.342459] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.342460] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
[ 0.342521] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.342522] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.342525] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.342525] vgaarb: loaded
[ 0.342581] PCI: Using ACPI for IRQ routing
[ 0.344053] PCI: pci_cache_line_size set to 64 bytes
[ 0.344129] e820: reserve RAM buffer [mem 0xbff0e000-0xbfffffff]
[ 0.344130] e820: reserve RAM buffer [mem 0x22f600000-0x22fffffff]
[ 0.344252] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.344256] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.346279] clocksource: Switched to clocksource hpet
[ 0.354198] VFS: Disk quotas dquot_6.6.0
[ 0.354226] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.354311] pnp: PnP ACPI init
[ 0.354391] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.354392] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.354393] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.354395] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.354396] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.354397] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.354398] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.354400] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.354401] system 00:00: [mem 0x20000000-0x201fffff] could not be reserved
[ 0.354402] system 00:00: [mem 0x40000000-0x401fffff] could not be reserved
[ 0.354405] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.354812] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.354814] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.354851] system 00:02: [io 0x0500-0x057f] has been reserved
[ 0.354852] system 00:02: [io 0x0480-0x04bf] has been reserved
[ 0.354854] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.354873] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.354900] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.354924] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.354947] pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active)
[ 0.354963] pnp: PnP ACPI: found 7 devices
[ 0.361062] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.361103] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.361111] pci 0000:00:1c.0: bridge window [mem 0xf1400000-0xf14fffff]
[ 0.361122] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.361128] pci 0000:00:1c.1: bridge window [mem 0xf1500000-0xf15fffff]
[ 0.361140] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.361142] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.361149] pci 0000:00:1c.2: bridge window [mem 0xf0800000-0xf0ffffff]
[ 0.361153] pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf07fffff 64bit pref]
[ 0.361162] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.361163] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.361164] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.361165] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.361166] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.361167] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.361168] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.361169] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.361170] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.361171] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.361172] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.361173] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[ 0.361174] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[ 0.361175] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[ 0.361176] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[ 0.361177] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
[ 0.361178] pci_bus 0000:00: resource 20 [mem 0xcea00000-0xf7ffffff window]
[ 0.361179] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff window]
[ 0.361180] pci_bus 0000:01: resource 1 [mem 0xf1400000-0xf14fffff]
[ 0.361181] pci_bus 0000:02: resource 1 [mem 0xf1500000-0xf15fffff]
[ 0.361182] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.361183] pci_bus 0000:03: resource 1 [mem 0xf0800000-0xf0ffffff]
[ 0.361184] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf07fffff 64bit pref]
[ 0.361271] NET: Registered protocol family 2
[ 0.361412] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.361537] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.361722] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.361753] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.361782] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.361850] NET: Registered protocol family 1
[ 0.361861] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.362441] PCI: CLS 64 bytes, default 64
[ 0.362484] Unpacking initramfs...
[ 0.692153] Freeing initrd memory: 20684K
[ 0.692244] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.692246] software IO TLB [mem 0xb7600000-0xbb600000] (64MB) mapped at [ffff96d737600000-ffff96d73b5fffff]
[ 0.692565] audit: initializing netlink subsys (disabled)
[ 0.692612] audit: type=2000 audit(1501216701.688:1): state=initialized audit_enabled=0 res=1
[ 0.692889] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[ 0.692928] zbud: loaded
[ 0.693691] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 0.693722] io scheduler noop registered
[ 0.693723] io scheduler deadline registered
[ 0.693736] io scheduler cfq registered (default)
[ 0.693737] io scheduler mq-deadline registered
[ 0.694481] pcieport 0000:00:1c.0: Signaling PME with IRQ 26
[ 0.694501] pcieport 0000:00:1c.1: Signaling PME with IRQ 27
[ 0.694520] pcieport 0000:00:1c.2: Signaling PME with IRQ 28
[ 0.694541] pciehp 0000:00:1c.2:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[ 0.694581] efifb: probing for efifb
[ 0.694592] efifb: framebuffer at 0xe0000000, using 4160k, total 4160k
[ 0.694592] efifb: mode is 1376x768x32, linelength=5504, pages=1
[ 0.694593] efifb: scrolling: redraw
[ 0.694594] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.696824] Console: switching to colour frame buffer device 172x48
[ 0.698967] fb0: EFI VGA frame buffer device
[ 0.698974] intel_idle: MWAIT substates: 0x21120
[ 0.698975] intel_idle: v0.4.1 model 0x3A
[ 0.699106] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.699439] GHES: HEST is not enabled!
[ 0.699491] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.699817] Linux agpgart interface v0.103
[ 0.714377] tpm_tis 00:06: 1.2 TPM (device-id 0x0, rev-id 78)
[ 0.794683] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 0.794683] AMD IOMMUv2 functionality not available on this system
[ 0.795144] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.796735] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.796740] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.796854] mousedev: PS/2 mouse device common for all mice
[ 0.796892] rtc_cmos 00:03: RTC can wake from S4
[ 0.797018] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.797048] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.797058] intel_pstate: Intel P-state driver initializing
[ 0.797409] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.797787] NET: Registered protocol family 10
[ 0.798192] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.798490] Segment Routing with IPv6
[ 0.798513] mip6: Mobile IPv6
[ 0.798515] NET: Registered protocol family 17
[ 0.798519] mpls_gso: MPLS GSO support
[ 0.798979] microcode: sig=0x306a9, pf=0x10, revision=0x1b
[ 0.799115] microcode: Microcode Update Driver: v2.2.
[ 0.799330] registered taskstats version 1
[ 0.799355] zswap: loaded using pool lzo/zbud
[ 0.958864] rtc_cmos 00:03: setting system clock to 2017-07-28 04:38:22 UTC (1501216702)
[ 0.958911] PM: Hibernation image not present or could not be loaded.
[ 0.961104] Freeing unused kernel memory: 1436K
[ 0.961106] Write protecting the kernel read-only data: 12288k
[ 0.961884] Freeing unused kernel memory: 1712K
[ 0.966957] Freeing unused kernel memory: 1308K
[ 0.969895] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.056332] pps_core: LinuxPPS API ver. 1 registered
[ 1.056333] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 1.056558] PTP clock support registered
[ 1.057943] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 1.057945] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.058041] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 1.058140] ACPI: bus type USB registered
[ 1.058158] usbcore: registered new interface driver usbfs
[ 1.058165] usbcore: registered new interface driver hub
[ 1.058183] usbcore: registered new device driver usb
[ 1.058614] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.058770] ehci-pci: EHCI PCI platform driver
[ 1.059374] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 1.059910] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.059912] ACPI: Thermal Zone [THM0] (50 C)
[ 1.062987] SCSI subsystem initialized
[ 1.066825] AVX version of gcm_enc/dec engaged.
[ 1.066826] AES CTR mode by8 optimization enabled
[ 1.066889] sdhci: Secure Digital Host Controller Interface driver
[ 1.066889] sdhci: Copyright(c) Pierre Ossman
[ 1.067172] sdhci-pci 0000:01:00.0: SDHCI controller found [1180:e823] (rev 4)
[ 1.067576] mmc0: SDHCI controller on PCI [0000:01:00.0] using DMA
[ 1.070555] libata version 3.00 loaded.
[ 1.070657] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.070658] ACPI: Thermal Zone [THM1] (27 C)
[ 1.204405] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[ 1.329206] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 3c:97:0e:b6:6c:5b
[ 1.329208] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 1.329261] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
[ 1.329519] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.329525] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.329538] ehci-pci 0000:00:1a.0: debug port 2
[ 1.333437] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.333456] ehci-pci 0000:00:1a.0: irq 21, io mem 0xf163e000
[ 1.346411] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.346495] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.346498] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.346499] usb usb1: Product: EHCI Host Controller
[ 1.346501] usb usb1: Manufacturer: Linux 4.11.0-1-amd64 ehci_hcd
[ 1.346503] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.346808] hub 1-0:1.0: USB hub found
[ 1.346817] hub 1-0:1.0: 3 ports detected
[ 1.347177] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.347183] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.347199] ehci-pci 0000:00:1d.0: debug port 2
[ 1.351105] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.351122] ehci-pci 0000:00:1d.0: irq 19, io mem 0xf163f000
[ 1.366389] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.366462] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.366464] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.366466] usb usb2: Product: EHCI Host Controller
[ 1.366468] usb usb2: Manufacturer: Linux 4.11.0-1-amd64 ehci_hcd
[ 1.366470] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.366791] hub 2-0:1.0: USB hub found
[ 1.366800] hub 2-0:1.0: 3 ports detected
[ 1.367325] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.367339] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 1.368472] xhci_hcd 0000:00:14.0: hcc params 0x200071a1 hci version 0x100 quirks 0x0000b930
[ 1.368483] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.368646] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.368648] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.368650] usb usb3: Product: xHCI Host Controller
[ 1.368652] usb usb3: Manufacturer: Linux 4.11.0-1-amd64 xhci-hcd
[ 1.368653] usb usb3: SerialNumber: 0000:00:14.0
[ 1.368941] hub 3-0:1.0: USB hub found
[ 1.368955] hub 3-0:1.0: 4 ports detected
[ 1.369118] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.369123] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 1.369173] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.369175] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.369177] usb usb4: Product: xHCI Host Controller
[ 1.369179] usb usb4: Manufacturer: Linux 4.11.0-1-amd64 xhci-hcd
[ 1.369181] usb usb4: SerialNumber: 0000:00:14.0
[ 1.369353] hub 4-0:1.0: USB hub found
[ 1.369367] hub 4-0:1.0: 4 ports detected
[ 1.369862] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 1.370639] ahci 0000:00:1f.2: version 3.0
[ 1.370968] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 1.381092] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl SATA mode
[ 1.381097] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst
[ 1.382705] scsi host0: ahci
[ 1.383004] scsi host1: ahci
[ 1.383346] scsi host2: ahci
[ 1.383587] scsi host3: ahci
[ 1.383748] scsi host4: ahci
[ 1.383889] scsi host5: ahci
[ 1.383957] ata1: SATA max UDMA/133 abar m2048@0xf163d000 port 0xf163d100 irq 31
[ 1.383960] ata2: SATA max UDMA/133 abar m2048@0xf163d000 port 0xf163d180 irq 31
[ 1.383963] ata3: SATA max UDMA/133 abar m2048@0xf163d000 port 0xf163d200 irq 31
[ 1.383965] ata4: DUMMY
[ 1.383966] ata5: DUMMY
[ 1.383966] ata6: DUMMY
[ 1.674373] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.694374] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.697066] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.697814] ata1.00: ATA-9: WDC WD10SPCX-08HWST0, 01.01A01, max UDMA/133
[ 1.697817] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 1.698499] tsc: Refined TSC clocksource calibration: 2594.108 MHz
[ 1.698510] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x25647e07037, max_idle_ns: 440795273876 ns
[ 1.698548] ata1.00: configured for UDMA/133
[ 1.698998] scsi 0:0:0:0: Direct-Access ATA WDC WD10SPCX-08H 1A01 PQ: 0 ANSI: 5
[ 1.822968] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.822972] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.823389] hub 1-1:1.0: USB hub found
[ 1.823537] hub 1-1:1.0: 6 ports detected
[ 1.828379] psmouse serio1: synaptics: queried max coordinates: x [..5768], y [..5062]
[ 1.842969] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.842972] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.843404] hub 2-1:1.0: USB hub found
[ 1.843536] hub 2-1:1.0: 8 ports detected
[ 1.858503] psmouse serio1: synaptics: queried min coordinates: x [1174..], y [790..]
[ 1.919730] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd002a3/0x940300/0x123800/0x0, board id: 1611, fw id: 1099905
[ 1.919742] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[ 1.957597] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
[ 1.995492] random: fast init done
[ 2.045160] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.110392] usb 1-1.4: new full-speed USB device number 3 using ehci-pci
[ 2.130393] usb 2-1.6: new full-speed USB device number 3 using ehci-pci
[ 2.223335] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=217f
[ 2.223338] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.223341] usb 1-1.4: Product: Broadcom Bluetooth Device
[ 2.223343] usb 1-1.4: Manufacturer: Broadcom Corp
[ 2.223346] usb 1-1.4: SerialNumber: 7CE9D3B7FC24
[ 2.244586] usb 2-1.6: New USB device found, idVendor=08e6, idProduct=34ec
[ 2.244589] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.244591] usb 2-1.6: Product: GemPC Express
[ 2.244593] usb 2-1.6: Manufacturer: Gemplus
[ 2.302394] usb 1-1.6: new high-speed USB device number 4 using ehci-pci
[ 2.361170] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.363562] ata3.00: ATA-8: LITEONIT LSS-32L6G-HP, DS51704, max UDMA/133
[ 2.363565] ata3.00: 62533296 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 2.364292] ata3.00: configured for UDMA/133
[ 2.364665] scsi 2:0:0:0: Direct-Access ATA LITEONIT LSS-32L 704 PQ: 0 ANSI: 5
[ 2.402221] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 2.402227] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 2.402262] sd 0:0:0:0: [sda] Write Protect is off
[ 2.402266] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.402320] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.402503] sd 2:0:0:0: [sdb] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB)
[ 2.402560] sd 2:0:0:0: [sdb] Write Protect is off
[ 2.402564] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.402618] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.404994] sdb: sdb1 sdb2 sdb3 sdb5 sdb6 sdb7
[ 2.405912] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 2.418813] usb 1-1.6: New USB device found, idVendor=04f2, idProduct=b2ea
[ 2.418814] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.418815] usb 1-1.6: Product: Integrated Camera
[ 2.418815] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd.
[ 2.546908] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8
[ 2.547523] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.585994] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 2.722511] clocksource: Switched to clocksource tsc
[ 2.781606] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input3
[ 3.618414] raid6: sse2x1 gen() 8925 MB/s
[ 3.686409] raid6: sse2x1 xor() 6926 MB/s
[ 3.754415] raid6: sse2x2 gen() 11083 MB/s
[ 3.822416] raid6: sse2x2 xor() 7966 MB/s
[ 3.890420] raid6: sse2x4 gen() 13082 MB/s
[ 3.958421] raid6: sse2x4 xor() 9695 MB/s
[ 3.958422] raid6: using algorithm sse2x4 gen() 13082 MB/s
[ 3.958422] raid6: .... xor() 9695 MB/s, rmw enabled
[ 3.958423] raid6: using ssse3x2 recovery algorithm
[ 3.958654] xor: automatically using best checksumming function avx
[ 3.958770] async_tx: api initialized (async)
[ 3.971982] Btrfs loaded, crc32c=crc32c-intel
[ 4.742539] PM: Starting manual resume from disk
[ 4.742545] PM: Hibernation image partition 8:2 present
[ 4.742546] PM: Looking for hibernation image.
[ 4.742707] PM: Image not found (code -22)
[ 4.742708] PM: Hibernation image not present or could not be loaded.
[ 4.888901] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[ 4.942223] random: crng init done
[ 5.021197] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 5.025574] systemd[1]: systemd 234 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
[ 5.025674] systemd[1]: Detected architecture x86-64.
[ 5.025824] systemd[1]: Set hostname to <universi-mcbk52>.
[ 5.169638] systemd[1]: Created slice User and Session Slice.
[ 5.169697] systemd[1]: Listening on Journal Socket (/dev/log).
[ 5.169715] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 5.169725] systemd[1]: Reached target Libvirt guests shutdown.
[ 5.169738] systemd[1]: Listening on Syslog Socket.
[ 5.169821] systemd[1]: Created slice System Slice.
[ 5.169880] systemd[1]: Listening on Journal Audit Socket.
[ 5.184419] EXT4-fs (sdb5): re-mounted. Opts: discard,user_xattr,errors=remount-ro
[ 5.202914] RPC: Registered named UNIX socket transport module.
[ 5.202915] RPC: Registered udp transport module.
[ 5.202916] RPC: Registered tcp transport module.
[ 5.202916] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 5.205904] lp: driver loaded but no devices found
[ 5.210497] ppdev: user-space parallel port driver
[ 5.318170] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1f/PNP0C09:00/PNP0C0E:00/input/input4
[ 5.318175] ACPI: Sleep Button [SLPB]
[ 5.318422] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1f/PNP0C09:00/PNP0C0D:00/input/input5
[ 5.318507] ACPI: Lid Switch [LID]
[ 5.318561] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 5.318564] ACPI: Power Button [PWRF]
[ 5.339318] ACPI: Battery Slot [BAT0] (battery present)
[ 5.339428] ACPI: Battery Slot [BAT1] (battery absent)
[ 5.339551] ACPI: AC Adapter [AC] (off-line)
[ 5.375907] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.375938] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 5.381180] Non-volatile memory driver v1.3
[ 5.384568] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[ 5.384569] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 5.384570] thinkpad_acpi: ThinkPad BIOS CBET4000 4.6-890-g3dcbb4541b, EC G2HT35WW-3.22
[ 5.384571] thinkpad_acpi: Lenovo ThinkPad X230, model 23255A9
[ 5.384742] thinkpad_hwmon thinkpad_hwmon: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 5.384911] thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode
[ 5.384987] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 5.384987] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 5.387163] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 5.387237] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 5.388774] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input7
[ 5.438763] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 5.449183] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 5.449185] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 5.449186] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 5.449186] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ 5.502928] EXT4-fs (sdb3): mounting ext2 file system using the ext4 subsystem
[ 5.504821] EXT4-fs (sdb3): mounted filesystem without journal. Opts: user_xattr
[ 5.508373] EXT4-fs (sdb7): mounted filesystem with ordered data mode. Opts: discard,user_xattr
[ 5.577174] Adding 8389628k swap on /dev/sda2. Priority:-1 extents:1 across:8389628k FS
[ 5.917008] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: user_xattr
[ 6.915511] Bluetooth: Core ver 2.22
[ 6.915526] NET: Registered protocol family 31
[ 6.915527] Bluetooth: HCI device and connection manager initialized
[ 6.915530] Bluetooth: HCI socket layer initialized
[ 6.915532] Bluetooth: L2CAP socket layer initialized
[ 6.915539] Bluetooth: SCO socket layer initialized
[ 7.099664] usbcore: registered new interface driver btusb
[ 7.104496] media: Linux media interface: v0.10
[ 7.107409] Linux video capture interface: v2.00
[ 7.179178] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b2ea)
[ 7.181601] uvcvideo 1-1.6:1.0: Entity type for entity Extension 4 was not initialized!
[ 7.181607] uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized!
[ 7.181610] uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized!
[ 7.181613] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized!
[ 7.181777] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input9
[ 7.181894] usbcore: registered new interface driver uvcvideo
[ 7.181895] USB Video Class driver (1.1.1)
[ 7.362562] mei_me 0000:00:16.0: wait hw ready failed
[ 7.362587] mei_me 0000:00:16.0: hw_start failed ret = -62
[ 7.362618] mei_me 0000:00:16.0: H_RST is set = 0x80000015
[ 8.203738] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: user_xattr
[ 8.281841] EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: discard,user_xattr
[ 8.314140] systemd-journald[292]: Received request to flush runtime journal from PID 1
[ 8.765905] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: user_xattr
[ 8.827744] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: user_xattr
[ 8.893030] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: user_xattr
[ 9.165360] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: user_xattr
[ 9.182633] usb 2-1.8: new high-speed USB device number 4 using ehci-pci
[ 9.295007] usb 2-1.8: New USB device found, idVendor=17ef, idProduct=1009
[ 9.295010] usb 2-1.8: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 9.295302] hub 2-1.8:1.0: USB hub found
[ 9.295369] hub 2-1.8:1.0: 4 ports detected
[ 9.378658] mei_me 0000:00:16.0: wait hw ready failed
[ 9.378711] mei_me 0000:00:16.0: hw_start failed ret = -62
[ 9.378772] mei_me 0000:00:16.0: H_RST is set = 0x80000015
[ 9.721734] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 9.721736] Bluetooth: BNEP filters: protocol multicast
[ 9.721740] Bluetooth: BNEP socket layer initialized
[ 9.764181] nfc: nfc_init: NFC Core ver 0.1
[ 9.764203] NET: Registered protocol family 39
[ 11.394713] mei_me 0000:00:16.0: wait hw ready failed
[ 11.394758] mei_me 0000:00:16.0: hw_start failed ret = -62
[ 11.394791] mei_me 0000:00:16.0: reset: reached maximal consecutive resets: disabling the device
[ 11.394834] mei_me 0000:00:16.0: reset failed ret = -19
[ 11.394862] mei_me 0000:00:16.0: link layer initialization failed.
[ 11.394893] mei_me 0000:00:16.0: init hw failure.
[ 11.394974] mei_me 0000:00:16.0: initialization failed.
[ 11.395130] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 11.395290] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20170119/utaddress-247)
[ 11.395295] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 11.395298] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20170119/utaddress-247)
[ 11.395301] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 11.395302] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20170119/utaddress-247)
[ 11.395304] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 11.395305] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20170119/utaddress-247)
[ 11.395308] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 11.395308] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 11.395724] [drm] Memory usable by graphics device = 2048M
[ 11.395726] checking generic (e0000000 410000) vs hw (e0000000 10000000)
[ 11.395727] fb: switching to inteldrmfb from EFI VGA
[ 11.395848] Console: switching to colour dummy device 80x25
[ 11.397498] [drm] Replacing VGA console driver
[ 11.403503] iTCO_vendor_support: vendor-support=0
[ 11.404269] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 11.404321] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560)
[ 11.404462] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 11.447061] ath: phy0: Killer Wireless card detected
[ 11.456693] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 11.456694] [drm] Driver supports precise vblank timestamp query.
[ 11.457238] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 11.458430] ath: phy0: ASPM enabled: 0x43
[ 11.458432] ath: EEPROM regdomain: 0x60
[ 11.458432] ath: EEPROM indicates we should expect a direct regpair map
[ 11.458434] ath: Country alpha2 being used: 00
[ 11.458434] ath: Regpair used: 0x60
[ 11.462127] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 11.462482] ieee80211 phy0: Atheros AR9300 Rev:3 mem=0xffffa31941840000, irq=17
[ 11.530401] [drm] Initialized i915 1.6.0 20170123 for 0000:00:02.0 on minor 0
[ 11.530522] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 11.531800] acpi device:03: registered as cooling_device4
[ 11.531873] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10
[ 11.549731] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 11.549732] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 11.549733] snd_hda_codec_realtek hdaudioC0D0: hp_outs=2 (0x15/0x1b/0x0/0x0/0x0)
[ 11.549734] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 11.549734] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 11.549736] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 11.549737] snd_hda_codec_realtek hdaudioC0D0: Dock Mic=0x19
[ 11.549738] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 11.556705] intel_rapl: Found RAPL domain package
[ 11.556707] intel_rapl: Found RAPL domain core
[ 11.556707] intel_rapl: Found RAPL domain uncore
[ 11.946846] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 11.946893] fbcon: inteldrmfb (fb0) is primary device
[ 11.950745] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 11.953590] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 11.954329] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 11.954410] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 11.954482] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 11.954550] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 11.954617] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 11.954683] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[ 12.537652] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 12.802997] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 12.818966] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 12.829939] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 12.846921] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 13.108386] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 13.169918] Console: switching to colour frame buffer device 172x48
[ 13.188556] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 14.090845] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 14.105486] Ebtables v2.0 registered
[ 15.408814] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 15.408855] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 20.511713] Bluetooth: RFCOMM TTY layer initialized
[ 20.511718] Bluetooth: RFCOMM socket layer initialized
[ 20.511724] Bluetooth: RFCOMM ver 1.11
[ 359.197486] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready