blob: 746e78fc20639d6c8543a50184836889bbb0b239 [file] [log] [blame]
[ 0.000000] Linux version 4.9.0-3-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #1 SMP Debian 4.9.30-2 (2017-06-12)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.9.0-3-amd64 root=UUID=f545d1ea-3103-4100-8a85-54db5c9634ad ro quiet iomem=relaxed
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16
[ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff0efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bff0f000-0x00000000bfffffff] type 16
[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000c29fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043b5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: LENOVO 23255A9/23255A9, BIOS CBET4000 4.6-596-g12983db91d-dirty 06/28/2017
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x43b600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-back
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0C0000000 mask FE0000000 uncachable
[ 0.000000] 1 base 0E0000000 mask FF0000000 write-combining
[ 0.000000] 2 base 0F0000000 mask FF0000000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: last_pfn = 0xbff0f max_arch_pfn = 0x400000000
[ 0.000000] Base memory trampoline at [ffff8dafc0099000] 99000 size 24576
[ 0.000000] BRK [0x39872e000, 0x39872efff] PGTABLE
[ 0.000000] BRK [0x39872f000, 0x39872ffff] PGTABLE
[ 0.000000] BRK [0x398730000, 0x398730fff] PGTABLE
[ 0.000000] BRK [0x398731000, 0x398731fff] PGTABLE
[ 0.000000] BRK [0x398732000, 0x398732fff] PGTABLE
[ 0.000000] BRK [0x398733000, 0x398733fff] PGTABLE
[ 0.000000] BRK [0x398734000, 0x398734fff] PGTABLE
[ 0.000000] BRK [0x398735000, 0x398735fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x3584f000-0x36c1efff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0000 000024 (v02 CORE )
[ 0.000000] ACPI: XSDT 0x00000000BFF210E0 00005C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: FACP 0x00000000BFF24790 0000F4 (v04 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: DSDT 0x00000000BFF21280 00350F (v02 COREv4 COREBOOT 20110725 INTL 20161222)
[ 0.000000] ACPI: FACS 0x00000000BFF21240 000040
[ 0.000000] ACPI: FACS 0x00000000BFF21240 000040
[ 0.000000] ACPI: SSDT 0x00000000BFF24890 00189A (v02 CORE COREBOOT 0000002A CORE 0000002A)
[ 0.000000] ACPI: MCFG 0x00000000BFF26130 00003C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: TCPA 0x00000000BFF26170 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: APIC 0x00000000BFF261B0 00006C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: DMAR 0x00000000BFF26220 0000A8 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: HPET 0x00000000BFF282D0 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000043b5fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x43b5ef000-0x43b5f3fff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000043b5fffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009ffff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000bff0efff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000043b5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000043b5fffff]
[ 0.000000] On node 0 totalpages: 4175022
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 22 pages reserved
[ 0.000000] DMA zone: 3999 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12221 pages used for memmap
[ 0.000000] DMA32 zone: 782095 pages, LIFO batch:31
[ 0.000000] Normal zone: 52952 pages used for memmap
[ 0.000000] Normal zone: 3388928 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics memory at 0x00000000c0a00000-0x00000000c29fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x508
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbff0f000-0xbfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xc29fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc2a00000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfed3ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed8ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfed91fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed92000-0xffffffff]
[ 0.000000] e820: [mem 0xc2a00000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 35 pages/cpu @ffff8db3fb200000 s103512 r8192 d31656 u524288
[ 0.000000] pcpu-alloc: s103512 r8192 d31656 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 4109763
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.9.0-3-amd64 root=UUID=f545d1ea-3103-4100-8a85-54db5c9634ad ro quiet iomem=relaxed
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 16335332K/16700088K available (6187K kernel code, 1137K rwdata, 2856K rodata, 1392K init, 688K bss, 364756K reserved, 0K cma-reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:33024 nr_irqs:456 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2594.111 MHz processor
[ 0.000024] Calibrating delay loop (skipped), value calculated using timer frequency.. 5188.22 BogoMIPS (lpj=10376444)
[ 0.000026] pid_max: default: 32768 minimum: 301
[ 0.000039] ACPI: Core revision 20160831
[ 0.002574] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.002616] Security Framework initialized
[ 0.002617] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.002623] AppArmor: AppArmor disabled by boot time parameter
[ 0.003342] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.007067] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.008766] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.008779] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.009066] CPU: Physical Processor ID: 0
[ 0.009067] CPU: Processor Core ID: 0
[ 0.009074] mce: CPU supports 7 MCE banks
[ 0.009082] CPU0: Thermal monitoring enabled (TM1)
[ 0.009090] process: using mwait in idle threads
[ 0.009093] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.009093] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.009478] Freeing SMP alternatives memory: 24K (ffffffffb607a000 - ffffffffb6080000)
[ 0.011596] ftrace: allocating 25177 entries in 99 pages
[ 0.022536] smpboot: Max logical packages: 2
[ 0.022541] DMAR: Host address width 36
[ 0.022542] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.022550] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[ 0.022550] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.022554] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[ 0.022556] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.022556] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.022557] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.022833] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.022835] x2apic enabled
[ 0.022839] Switched APIC routing to cluster x2apic.
[ 0.023295] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.062984] TSC deadline timer enabled
[ 0.062987] smpboot: CPU0: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[ 0.062991] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.063017] ... version: 3
[ 0.063017] ... bit width: 48
[ 0.063018] ... generic registers: 4
[ 0.063018] ... value mask: 0000ffffffffffff
[ 0.063019] ... max period: 00007fffffffffff
[ 0.063019] ... fixed-purpose events: 3
[ 0.063019] ... event mask: 000000070000000f
[ 0.063542] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.063639] x86: Booting SMP configuration:
[ 0.063641] .... node #0, CPUs: #1 #2 #3
[ 0.305111] x86: Booted up 1 node, 4 CPUs
[ 0.305113] smpboot: Total of 4 processors activated (20756.33 BogoMIPS)
[ 0.308274] devtmpfs: initialized
[ 0.308338] x86/mm: Memory block size: 128MB
[ 0.311682] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.311690] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.311728] pinctrl core: initialized pinctrl subsystem
[ 0.311835] NET: Registered protocol family 16
[ 0.327830] cpuidle: using governor ladder
[ 0.343839] cpuidle: using governor menu
[ 0.343888] ACPI: bus type PCI registered
[ 0.343890] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.343972] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.343974] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.343982] PCI: Using configuration type 1 for base access
[ 0.344016] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.359998] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.360218] ACPI: Added _OSI(Module Device)
[ 0.360219] ACPI: Added _OSI(Processor Device)
[ 0.360219] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.360220] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.360351] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.362307] ACPI : EC: EC started
[ 0.362308] ACPI : EC: interrupt blocked
[ 0.362350] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
[ 0.362351] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.362352] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions
[ 0.362353] ACPI: Interpreter enabled
[ 0.362368] ACPI: (supports S0 S3 S4 S5)
[ 0.362369] ACPI: Using IOAPIC for interrupt routing
[ 0.362387] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.366330] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.366334] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.366378] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.366387] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.366569] PCI host bridge to bus 0000:00
[ 0.366571] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.366572] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.366573] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.366574] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.366575] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.366576] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.366577] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.366578] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.366579] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.366580] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.366581] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.366582] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.366583] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.366584] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.366585] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.366586] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[ 0.366587] pci_bus 0000:00: root bus resource [mem 0xc2a00000-0xf7ffffff window]
[ 0.366588] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[ 0.366589] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.366595] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.366681] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 0.366690] pci 0000:00:02.0: reg 0x10: [mem 0xf1000000-0xf13fffff 64bit]
[ 0.366695] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.366699] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
[ 0.366772] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000
[ 0.366780] pci 0000:00:04.0: reg 0x10: [mem 0xf1630000-0xf1637fff 64bit]
[ 0.366873] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.366893] pci 0000:00:14.0: reg 0x10: [mem 0xf1620000-0xf162ffff 64bit]
[ 0.366960] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.366994] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.367061] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.367138] pci 0000:00:16.0: reg 0x10: [mem 0xf1641000-0xf164100f 64bit]
[ 0.367468] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.367564] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[ 0.367578] pci 0000:00:19.0: reg 0x10: [mem 0xf1600000-0xf161ffff]
[ 0.367587] pci 0000:00:19.0: reg 0x14: [mem 0xf163c000-0xf163cfff]
[ 0.367595] pci 0000:00:19.0: reg 0x18: [io 0x3040-0x305f]
[ 0.367653] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.367717] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.367734] pci 0000:00:1a.0: reg 0x10: [mem 0xf163e000-0xf163e3ff]
[ 0.367816] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.367850] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.367892] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.367908] pci 0000:00:1b.0: reg 0x10: [mem 0xf1638000-0xf163bfff 64bit]
[ 0.367979] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.368017] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.368060] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.368184] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.368270] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 0.368394] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.368481] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[ 0.368606] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.368693] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.368710] pci 0000:00:1d.0: reg 0x10: [mem 0xf163f000-0xf163f3ff]
[ 0.368791] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.368825] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.368862] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100
[ 0.369022] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.369038] pci 0000:00:1f.2: reg 0x10: [io 0x3080-0x3087]
[ 0.369046] pci 0000:00:1f.2: reg 0x14: [io 0x3090-0x3093]
[ 0.369054] pci 0000:00:1f.2: reg 0x18: [io 0x3088-0x308f]
[ 0.369062] pci 0000:00:1f.2: reg 0x1c: [io 0x3094-0x3097]
[ 0.369070] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
[ 0.369078] pci 0000:00:1f.2: reg 0x24: [mem 0xf163d000-0xf163d7ff]
[ 0.369121] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.369189] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.369205] pci 0000:00:1f.3: reg 0x10: [mem 0xf1640000-0xf16400ff 64bit]
[ 0.369225] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.369393] pci 0000:01:00.0: [1180:e822] type 00 class 0x080501
[ 0.369426] pci 0000:01:00.0: MMC controller base frequency changed to 50Mhz.
[ 0.369465] pci 0000:01:00.0: reg 0x10: [mem 0xf1400000-0xf14000ff]
[ 0.369766] pci 0000:01:00.0: supports D1 D2
[ 0.369767] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.381177] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.381188] pci 0000:00:1c.0: bridge window [mem 0xf1400000-0xf14fffff]
[ 0.381306] pci 0000:02:00.0: [168c:0030] type 00 class 0x028000
[ 0.381347] pci 0000:02:00.0: reg 0x10: [mem 0xf1500000-0xf151ffff 64bit]
[ 0.381439] pci 0000:02:00.0: reg 0x30: [mem 0xf1520000-0xf152ffff pref]
[ 0.381557] pci 0000:02:00.0: supports D1
[ 0.381557] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
[ 0.393179] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.393189] pci 0000:00:1c.1: bridge window [mem 0xf1500000-0xf15fffff]
[ 0.393294] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.393298] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.393303] pci 0000:00:1c.2: bridge window [mem 0xf0800000-0xf0ffffff]
[ 0.393310] pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf07fffff 64bit pref]
[ 0.393421] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 12 14 15) *11
[ 0.393465] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.393507] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12 14 15) *11
[ 0.393547] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.393588] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12 14 15) *11
[ 0.393629] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.393669] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12 14 15) *11
[ 0.393709] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.394257] ACPI: Enabled 1 GPEs in block 00 to 3F
[ 0.394315] ACPI : EC: interrupt unblocked
[ 0.394321] ACPI : EC: event unblocked
[ 0.394327] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.394328] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
[ 0.394424] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.394425] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.394427] vgaarb: loaded
[ 0.394428] vgaarb: bridge control possible 0000:00:02.0
[ 0.394493] PCI: Using ACPI for IRQ routing
[ 0.395964] PCI: pci_cache_line_size set to 64 bytes
[ 0.396048] e820: reserve RAM buffer [mem 0xbff0f000-0xbfffffff]
[ 0.396049] e820: reserve RAM buffer [mem 0x43b600000-0x43bffffff]
[ 0.396187] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.396191] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.398213] clocksource: Switched to clocksource hpet
[ 0.404141] VFS: Disk quotas dquot_6.6.0
[ 0.404167] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.404250] pnp: PnP ACPI init
[ 0.404338] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.404339] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.404340] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.404341] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.404342] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.404344] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.404345] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.404346] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.404348] system 00:00: [mem 0x20000000-0x201fffff] could not be reserved
[ 0.404349] system 00:00: [mem 0x40000000-0x401fffff] could not be reserved
[ 0.404352] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.404801] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.404803] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.404843] system 00:02: [io 0x0500-0x057f] has been reserved
[ 0.404844] system 00:02: [io 0x0480-0x04bf] has been reserved
[ 0.404846] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.404867] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.404897] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.404923] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.404949] pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active)
[ 0.404965] pnp: PnP ACPI: found 7 devices
[ 0.411177] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.411218] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.411225] pci 0000:00:1c.0: bridge window [mem 0xf1400000-0xf14fffff]
[ 0.411237] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.411243] pci 0000:00:1c.1: bridge window [mem 0xf1500000-0xf15fffff]
[ 0.411254] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.411257] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.411263] pci 0000:00:1c.2: bridge window [mem 0xf0800000-0xf0ffffff]
[ 0.411267] pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf07fffff 64bit pref]
[ 0.411276] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.411277] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.411278] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.411279] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.411280] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.411281] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.411282] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.411283] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.411284] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.411285] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.411286] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.411287] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[ 0.411288] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[ 0.411289] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[ 0.411290] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[ 0.411291] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
[ 0.411292] pci_bus 0000:00: resource 20 [mem 0xc2a00000-0xf7ffffff window]
[ 0.411293] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff window]
[ 0.411295] pci_bus 0000:01: resource 1 [mem 0xf1400000-0xf14fffff]
[ 0.411296] pci_bus 0000:02: resource 1 [mem 0xf1500000-0xf15fffff]
[ 0.411297] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.411298] pci_bus 0000:03: resource 1 [mem 0xf0800000-0xf0ffffff]
[ 0.411299] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf07fffff 64bit pref]
[ 0.411382] NET: Registered protocol family 2
[ 0.411558] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.411751] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.411859] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.411886] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.411924] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.412000] NET: Registered protocol family 1
[ 0.412014] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.412592] PCI: CLS 64 bytes, default 64
[ 0.412637] Unpacking initramfs...
[ 0.737034] Freeing initrd memory: 20288K (ffff8daff584f000 - ffff8daff6c1f000)
[ 0.737075] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.737077] software IO TLB [mem 0xbbf0f000-0xbff0f000] (64MB) mapped at [ffff8db07bf0f000-ffff8db07ff0efff]
[ 0.737413] audit: initializing netlink subsys (disabled)
[ 0.737429] audit: type=2000 audit(1498703203.732:1): initialized
[ 0.737795] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[ 0.737836] zbud: loaded
[ 0.738498] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 0.738526] io scheduler noop registered
[ 0.738528] io scheduler deadline registered
[ 0.738539] io scheduler cfq registered (default)
[ 0.739267] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.739268] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.739273] pcie_pme 0000:00:1c.0:pcie001: service driver pcie_pme loaded
[ 0.739292] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[ 0.739293] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.739298] pcie_pme 0000:00:1c.1:pcie001: service driver pcie_pme loaded
[ 0.739316] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[ 0.739320] pcie_pme 0000:00:1c.2:pcie001: service driver pcie_pme loaded
[ 0.739328] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.739339] pciehp 0000:00:1c.2:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[ 0.739368] pciehp 0000:00:1c.2:pcie004: service driver pciehp loaded
[ 0.739371] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.739384] efifb: probing for efifb
[ 0.739397] efifb: framebuffer at 0xe0000000, using 4160k, total 4160k
[ 0.739397] efifb: mode is 1376x768x32, linelength=5504, pages=1
[ 0.739398] efifb: scrolling: redraw
[ 0.739399] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.741624] Console: switching to colour frame buffer device 172x48
[ 0.743764] fb0: EFI VGA frame buffer device
[ 0.743775] intel_idle: MWAIT substates: 0x21120
[ 0.743776] intel_idle: v0.4.1 model 0x3A
[ 0.743917] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.744265] GHES: HEST is not enabled!
[ 0.744322] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.744692] Linux agpgart interface v0.103
[ 0.758257] tpm_tis 00:06: 1.2 TPM (device-id 0x0, rev-id 78)
[ 0.870428] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 0.870429] AMD IOMMUv2 functionality not available on this system
[ 0.870787] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.872525] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.872529] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.872651] mousedev: PS/2 mouse device common for all mice
[ 0.872682] rtc_cmos 00:03: RTC can wake from S4
[ 0.872823] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.872852] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.872863] intel_pstate: Intel P-state driver initializing
[ 0.873283] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.873674] NET: Registered protocol family 10
[ 0.874095] mip6: Mobile IPv6
[ 0.874097] NET: Registered protocol family 17
[ 0.874101] mpls_gso: MPLS GSO support
[ 0.874485] microcode: sig=0x306a9, pf=0x10, revision=0x1b
[ 0.874592] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.874825] registered taskstats version 1
[ 0.874849] zswap: loaded using pool lzo/zbud
[ 0.878030] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 1.034816] rtc_cmos 00:03: setting system clock to 2017-06-29 02:26:44 UTC (1498703204)
[ 1.034874] PM: Hibernation image not present or could not be loaded.
[ 1.036882] Freeing unused kernel memory: 1392K (ffffffffb5f1e000 - ffffffffb607a000)
[ 1.036884] Write protecting the kernel read-only data: 12288k
[ 1.037693] Freeing unused kernel memory: 1988K (ffff8db357e0f000 - ffff8db358000000)
[ 1.042169] Freeing unused kernel memory: 1240K (ffff8db3582ca000 - ffff8db358400000)
[ 1.052136] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.143485] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.143574] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.143584] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.143595] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.144457] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.144490] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.146804] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.146916] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.146941] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.147559] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.185815] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.185818] ACPI: Thermal Zone [THM0] (63 C)
[ 1.185843] pps_core: LinuxPPS API ver. 1 registered
[ 1.185844] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 1.186193] PTP clock support registered
[ 1.186999] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.187001] ACPI: Thermal Zone [THM1] (27 C)
[ 1.187290] ACPI: bus type USB registered
[ 1.187319] usbcore: registered new interface driver usbfs
[ 1.187328] usbcore: registered new interface driver hub
[ 1.187356] usbcore: registered new device driver usb
[ 1.188308] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.188749] ehci-pci: EHCI PCI platform driver
[ 1.188955] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.188962] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.188976] ehci-pci 0000:00:1a.0: debug port 2
[ 1.189002] sdhci: Secure Digital Host Controller Interface driver
[ 1.189003] sdhci: Copyright(c) Pierre Ossman
[ 1.189344] sdhci-pci 0000:01:00.0: SDHCI controller found [1180:e822] (rev 7)
[ 1.190265] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 1.190266] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.191279] SCSI subsystem initialized
[ 1.192888] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.192915] ehci-pci 0000:00:1a.0: irq 21, io mem 0xf163e000
[ 1.193093] libata version 3.00 loaded.
[ 1.193977] mmc0: SDHCI controller on PCI [0000:01:00.0] using DMA
[ 1.199892] AVX version of gcm_enc/dec engaged.
[ 1.199893] AES CTR mode by8 optimization enabled
[ 1.206233] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.206305] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.206307] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.206309] usb usb1: Product: EHCI Host Controller
[ 1.206310] usb usb1: Manufacturer: Linux 4.9.0-3-amd64 ehci_hcd
[ 1.206311] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.206520] hub 1-0:1.0: USB hub found
[ 1.206534] hub 1-0:1.0: 3 ports detected
[ 1.206917] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.206924] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.206938] ehci-pci 0000:00:1d.0: debug port 2
[ 1.210832] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.210852] ehci-pci 0000:00:1d.0: irq 19, io mem 0xf163f000
[ 1.226230] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.226304] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.226306] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.226307] usb usb2: Product: EHCI Host Controller
[ 1.226308] usb usb2: Manufacturer: Linux 4.9.0-3-amd64 ehci_hcd
[ 1.226309] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.226452] hub 2-0:1.0: USB hub found
[ 1.226466] hub 2-0:1.0: 3 ports detected
[ 1.226797] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.226804] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 1.227893] xhci_hcd 0000:00:14.0: hcc params 0x200071a1 hci version 0x100 quirks 0x0000b930
[ 1.227899] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.228056] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.228057] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.228058] usb usb3: Product: xHCI Host Controller
[ 1.228059] usb usb3: Manufacturer: Linux 4.9.0-3-amd64 xhci-hcd
[ 1.228060] usb usb3: SerialNumber: 0000:00:14.0
[ 1.228168] hub 3-0:1.0: USB hub found
[ 1.228186] hub 3-0:1.0: 4 ports detected
[ 1.228343] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.228346] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 1.228413] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.228414] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.228415] usb usb4: Product: xHCI Host Controller
[ 1.228416] usb usb4: Manufacturer: Linux 4.9.0-3-amd64 xhci-hcd
[ 1.228417] usb usb4: SerialNumber: 0000:00:14.0
[ 1.228511] hub 4-0:1.0: USB hub found
[ 1.228528] hub 4-0:1.0: 4 ports detected
[ 1.228735] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 1.365714] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[ 1.482962] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 3c:97:0e:b6:6c:5b
[ 1.482964] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 1.483029] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
[ 1.483075] ahci 0000:00:1f.2: version 3.0
[ 1.483434] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 1.493563] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl SATA mode
[ 1.493567] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst
[ 1.494920] scsi host0: ahci
[ 1.495253] scsi host1: ahci
[ 1.495543] scsi host2: ahci
[ 1.495724] scsi host3: ahci
[ 1.495908] scsi host4: ahci
[ 1.496091] scsi host5: ahci
[ 1.496206] ata1: SATA max UDMA/133 abar m2048@0xf163d000 port 0xf163d100 irq 31
[ 1.496211] ata2: SATA max UDMA/133 abar m2048@0xf163d000 port 0xf163d180 irq 31
[ 1.496215] ata3: SATA max UDMA/133 abar m2048@0xf163d000 port 0xf163d200 irq 31
[ 1.496217] ata4: DUMMY
[ 1.496218] ata5: DUMMY
[ 1.496219] ata6: DUMMY
[ 1.496494] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 1.538265] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.558284] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.686664] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.686667] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.687084] hub 1-1:1.0: USB hub found
[ 1.687858] hub 1-1:1.0: 6 ports detected
[ 1.706812] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.706815] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.707221] hub 2-1:1.0: USB hub found
[ 1.707969] hub 2-1:1.0: 8 ports detected
[ 1.762249] tsc: Refined TSC clocksource calibration: 2594.107 MHz
[ 1.762260] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x25647d583cf, max_idle_ns: 440795304232 ns
[ 1.809101] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.809827] ata1.00: ATA-9: WDC WD10SPCX-08HWST0, 01.01A01, max UDMA/133
[ 1.809829] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 1.810596] ata1.00: configured for UDMA/133
[ 1.811104] scsi 0:0:0:0: Direct-Access ATA WDC WD10SPCX-08H 1A01 PQ: 0 ANSI: 5
[ 1.962772] psmouse serio1: synaptics: queried max coordinates: x [..5768], y [..5062]
[ 1.974255] usb 1-1.4: new full-speed USB device number 3 using ehci-pci
[ 1.993429] psmouse serio1: synaptics: queried min coordinates: x [1174..], y [790..]
[ 1.994254] usb 2-1.6: new full-speed USB device number 3 using ehci-pci
[ 2.012458] random: fast init done
[ 2.053376] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd002a3/0x940300/0x123800/0x0, board id: 1611, fw id: 1099905
[ 2.053388] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[ 2.087519] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=217f
[ 2.087523] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.087525] usb 1-1.4: Product: Broadcom Bluetooth Device
[ 2.087526] usb 1-1.4: Manufacturer: Broadcom Corp
[ 2.087528] usb 1-1.4: SerialNumber: 7CE9D3B7FC24
[ 2.091499] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input3
[ 2.108502] usb 2-1.6: New USB device found, idVendor=08e6, idProduct=34ec
[ 2.108519] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.108521] usb 2-1.6: Product: GemPC Express
[ 2.108522] usb 2-1.6: Manufacturer: Gemplus
[ 2.157201] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.166279] usb 1-1.6: new high-speed USB device number 4 using ehci-pci
[ 2.282418] usb 1-1.6: New USB device found, idVendor=04f2, idProduct=b2ea
[ 2.282423] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.282425] usb 1-1.6: Product: Integrated Camera
[ 2.282428] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd.
[ 2.473016] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.475356] ata3.00: ATA-8: LITEONIT LSS-32L6G-HP, DS51704, max UDMA/133
[ 2.475359] ata3.00: 62533296 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 2.475847] ata3.00: configured for UDMA/133
[ 2.476178] scsi 2:0:0:0: Direct-Access ATA LITEONIT LSS-32L 704 PQ: 0 ANSI: 5
[ 2.514139] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 2.514144] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 2.514264] sd 2:0:0:0: [sdb] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB)
[ 2.514347] sd 0:0:0:0: [sda] Write Protect is off
[ 2.514353] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.514400] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.514427] sd 2:0:0:0: [sdb] Write Protect is off
[ 2.514433] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.514499] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.516618] sdb: sdb1 sdb2 sdb3 sdb5 sdb6 sdb7
[ 2.517671] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 2.572549] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8
[ 2.574146] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.724146] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 2.786447] clocksource: Switched to clocksource tsc
[ 2.916786] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input4
[ 3.590004] md: linear personality registered for level -1
[ 3.592440] md: multipath personality registered for level -4
[ 3.594625] md: raid0 personality registered for level 0
[ 3.596645] md: raid1 personality registered for level 1
[ 3.666221] raid6: sse2x1 gen() 4590 MB/s
[ 3.734215] raid6: sse2x1 xor() 4739 MB/s
[ 3.802213] raid6: sse2x2 gen() 9638 MB/s
[ 3.870212] raid6: sse2x2 xor() 7862 MB/s
[ 3.938213] raid6: sse2x4 gen() 13074 MB/s
[ 4.006213] raid6: sse2x4 xor() 9682 MB/s
[ 4.006214] raid6: using algorithm sse2x4 gen() 13074 MB/s
[ 4.006214] raid6: .... xor() 9682 MB/s, rmw enabled
[ 4.006215] raid6: using ssse3x2 recovery algorithm
[ 4.006377] xor: automatically using best checksumming function avx
[ 4.006499] async_tx: api initialized (async)
[ 4.007813] md: raid6 personality registered for level 6
[ 4.007814] md: raid5 personality registered for level 5
[ 4.007815] md: raid4 personality registered for level 4
[ 4.012420] md: raid10 personality registered for level 10
[ 4.023807] Btrfs loaded, crc32c=crc32c-intel
[ 4.734953] PM: Starting manual resume from disk
[ 4.734959] PM: Hibernation image partition 8:2 present
[ 4.734960] PM: Looking for hibernation image.
[ 4.735215] PM: Image not found (code -22)
[ 4.735217] PM: Hibernation image not present or could not be loaded.
[ 4.812693] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[ 4.956637] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 4.961832] systemd[1]: systemd 233 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN default-hierarchy=hybrid)
[ 4.961982] systemd[1]: Detected architecture x86-64.
[ 4.962149] systemd[1]: Set hostname to <universi-mcbk52>.
[ 5.092759] random: crng init done
[ 5.110492] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 5.110697] systemd[1]: Created slice System Slice.
[ 5.110826] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 5.111364] systemd[1]: Mounting Debug File System...
[ 5.111876] systemd[1]: Mounting RPC Pipe File System...
[ 5.111960] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 5.111995] systemd[1]: Reached target Libvirt guests shutdown.
[ 5.130412] EXT4-fs (sdb5): re-mounted. Opts: discard,user_xattr,errors=remount-ro
[ 5.142468] RPC: Registered named UNIX socket transport module.
[ 5.142469] RPC: Registered udp transport module.
[ 5.142469] RPC: Registered tcp transport module.
[ 5.142470] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 5.150176] lp: driver loaded but no devices found
[ 5.152613] ppdev: user-space parallel port driver
[ 5.169392] Key type encrypted registered
[ 5.290954] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1f/PNP0C09:00/PNP0C0E:00/input/input5
[ 5.290958] ACPI: Sleep Button [SLPB]
[ 5.291567] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1f/PNP0C09:00/PNP0C0D:00/input/input6
[ 5.291570] ACPI: Lid Switch [LID]
[ 5.291629] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[ 5.291632] ACPI: Power Button [PWRF]
[ 5.294548] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 5.303444] ACPI: AC Adapter [AC] (on-line)
[ 5.310427] [drm] Initialized
[ 5.313284] ACPI: Battery Slot [BAT0] (battery present)
[ 5.313406] ACPI: Battery Slot [BAT1] (battery absent)
[ 5.318003] Non-volatile memory driver v1.3
[ 5.381316] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[ 5.381317] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 5.381318] thinkpad_acpi: ThinkPad BIOS CBET4000 4.6-596-g12983db91d-dirty, EC G2HT35WW-3.22
[ 5.381319] thinkpad_acpi: Lenovo ThinkPad X230, model 23255A9
[ 5.381364] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.384643] input: PC Speaker as /devices/platform/pcspkr/input/input9
[ 5.384705] thinkpad_acpi: possible tablet mode switch found; ThinkPad in laptop mode
[ 5.384795] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 5.384796] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 5.386443] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 5.396719] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 5.396809] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 5.399802] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input8
[ 5.405382] ath: phy0: Killer Wireless card detected
[ 5.416518] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 5.416520] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 5.416521] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 5.416521] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ 5.417709] ath: phy0: ASPM enabled: 0x43
[ 5.417711] ath: EEPROM regdomain: 0x60
[ 5.417712] ath: EEPROM indicates we should expect a direct regpair map
[ 5.417714] ath: Country alpha2 being used: 00
[ 5.417714] ath: Regpair used: 0x60
[ 5.436135] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 5.436336] ieee80211 phy0: Atheros AR9300 Rev:3 mem=0xffffa125c2460000, irq=17
[ 5.923730] EXT4-fs (sdb3): mounting ext2 file system using the ext4 subsystem
[ 5.925893] EXT4-fs (sdb3): mounted filesystem without journal. Opts: user_xattr
[ 5.952538] EXT4-fs (sdb7): mounted filesystem with ordered data mode. Opts: discard,user_xattr
[ 6.145977] Adding 8389628k swap on /dev/sda2. Priority:-1 extents:1 across:8389628k FS
[ 6.916946] Bluetooth: Core ver 2.22
[ 6.916965] NET: Registered protocol family 31
[ 6.916966] Bluetooth: HCI device and connection manager initialized
[ 6.916970] Bluetooth: HCI socket layer initialized
[ 6.916973] Bluetooth: L2CAP socket layer initialized
[ 6.916979] Bluetooth: SCO socket layer initialized
[ 6.919105] media: Linux media interface: v0.10
[ 6.924658] Linux video capture interface: v2.00
[ 7.094768] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b2ea)
[ 7.095313] usbcore: registered new interface driver btusb
[ 7.099123] uvcvideo 1-1.6:1.0: Entity type for entity Extension 4 was not initialized!
[ 7.099133] uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized!
[ 7.099138] uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized!
[ 7.099142] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized!
[ 7.099339] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input10
[ 7.100008] usbcore: registered new interface driver uvcvideo
[ 7.100010] USB Video Class driver (1.1.1)
[ 7.330253] mei_me 0000:00:16.0: wait hw ready failed
[ 7.330300] mei_me 0000:00:16.0: hw_start failed ret = -62
[ 7.330348] mei_me 0000:00:16.0: H_RST is set = 0x80000015
[ 7.990363] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: user_xattr
[ 8.350782] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: user_xattr
[ 8.417391] EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: discard,user_xattr
[ 8.422169] systemd-journald[283]: Received request to flush runtime journal from PID 1
[ 8.514429] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: user_xattr
[ 9.120572] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: user_xattr
[ 9.185190] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: user_xattr
[ 9.346232] mei_me 0000:00:16.0: wait hw ready failed
[ 9.346294] mei_me 0000:00:16.0: hw_start failed ret = -62
[ 9.346362] mei_me 0000:00:16.0: H_RST is set = 0x80000015
[ 9.624292] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: user_xattr
[ 10.303095] nfc: nfc_init: NFC Core ver 0.1
[ 10.303113] NET: Registered protocol family 39
[ 10.309937] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 10.309939] Bluetooth: BNEP filters: protocol multicast
[ 10.309942] Bluetooth: BNEP socket layer initialized
[ 11.366211] mei_me 0000:00:16.0: wait hw ready failed
[ 11.366213] mei_me 0000:00:16.0: hw_start failed ret = -62
[ 11.366215] mei_me 0000:00:16.0: reset: reached maximal consecutive resets: disabling the device
[ 11.366216] mei_me 0000:00:16.0: reset failed ret = -19
[ 11.366217] mei_me 0000:00:16.0: link layer initialization failed.
[ 11.366218] mei_me 0000:00:16.0: init hw failure.
[ 11.366331] mei_me 0000:00:16.0: initialization failed.
[ 11.366472] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20160831/utaddress-247)
[ 11.366477] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 11.366479] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20160831/utaddress-247)
[ 11.366483] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 11.366483] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20160831/utaddress-247)
[ 11.366486] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 11.366487] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20160831/utaddress-247)
[ 11.366489] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 11.366490] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 11.368688] [drm] Memory usable by graphics device = 2048M
[ 11.368690] checking generic (e0000000 410000) vs hw (e0000000 10000000)
[ 11.368691] fb: switching to inteldrmfb from EFI VGA
[ 11.368774] Console: switching to colour dummy device 80x25
[ 11.368831] [drm] Replacing VGA console driver
[ 11.370792] iTCO_vendor_support: vendor-support=0
[ 11.371621] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 11.371660] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560)
[ 11.372025] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 11.381752] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 11.381755] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 11.381757] snd_hda_codec_realtek hdaudioC0D0: hp_outs=2 (0x15/0x1b/0x0/0x0/0x0)
[ 11.381758] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 11.381759] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 11.381761] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 11.381762] snd_hda_codec_realtek hdaudioC0D0: Dock Mic=0x19
[ 11.381763] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 11.426253] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 11.426254] [drm] Driver supports precise vblank timestamp query.
[ 11.426514] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 11.475593] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 11.478310] acpi device:03: registered as cooling_device4
[ 11.478387] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input16
[ 11.671752] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 11.671763] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
[ 11.676347] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 11.677483] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 11.677994] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 11.678190] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 11.678841] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 11.680366] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 11.680760] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[ 11.681133] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
[ 11.783188] intel_rapl: Found RAPL domain package
[ 11.783190] intel_rapl: Found RAPL domain core
[ 11.783191] intel_rapl: Found RAPL domain uncore
[ 11.855942] fbcon: inteldrmfb (fb0) is primary device
[ 12.469359] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 12.726533] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 12.737226] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 12.748089] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 12.764735] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 13.067402] Console: switching to colour frame buffer device 172x48
[ 13.075773] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 13.087346] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 14.524803] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 14.536756] Ebtables v2.0 registered
[ 15.892313] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 15.892360] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 23.507867] Bluetooth: RFCOMM TTY layer initialized
[ 23.507877] Bluetooth: RFCOMM socket layer initialized
[ 23.507883] Bluetooth: RFCOMM ver 1.11
[ 54.237649] fuse init (API version 7.26)