blob: 6bb99c47fa74b9cd3d49e7b747090cc709f6808f [file] [log] [blame]
[ 0.000000] Linux version 4.9.0-3-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170425 (Debian 6.3.0-16) ) #1 SMP Debian 4.9.25-1 (2017-05-02)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.9.0-3-amd64 root=UUID=f545d1ea-3103-4100-8a85-54db5c9634ad ro quiet iomem=relaxed
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16
[ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff01fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bff02000-0x00000000bfffffff] type 16
[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000ce9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000042f5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: LENOVO 23255A9/23255A9, BIOS CBET4000 4.6-196-g0fb6568444 05/22/2017
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x42f600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-back
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0C0000000 mask FE0000000 uncachable
[ 0.000000] 1 base 0E0000000 mask FF0000000 write-combining
[ 0.000000] 2 base 0F0000000 mask FF0000000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: last_pfn = 0xbff02 max_arch_pfn = 0x400000000
[ 0.000000] Base memory trampoline at [ffff937a40099000] 99000 size 24576
[ 0.000000] BRK [0x25192e000, 0x25192efff] PGTABLE
[ 0.000000] BRK [0x25192f000, 0x25192ffff] PGTABLE
[ 0.000000] BRK [0x251930000, 0x251930fff] PGTABLE
[ 0.000000] BRK [0x251931000, 0x251931fff] PGTABLE
[ 0.000000] BRK [0x251932000, 0x251932fff] PGTABLE
[ 0.000000] BRK [0x251933000, 0x251933fff] PGTABLE
[ 0.000000] BRK [0x251934000, 0x251934fff] PGTABLE
[ 0.000000] BRK [0x251935000, 0x251935fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x35869000-0x36c2bfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0000 000024 (v02 CORE )
[ 0.000000] ACPI: XSDT 0x00000000BFF160E0 00005C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: FACP 0x00000000BFF19700 0000F4 (v04 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: DSDT 0x00000000BFF16280 00347A (v02 COREv4 COREBOOT 20110725 INTL 20161222)
[ 0.000000] ACPI: FACS 0x00000000BFF16240 000040
[ 0.000000] ACPI: FACS 0x00000000BFF16240 000040
[ 0.000000] ACPI: SSDT 0x00000000BFF19800 00189A (v02 CORE COREBOOT 0000002A CORE 0000002A)
[ 0.000000] ACPI: MCFG 0x00000000BFF1B0A0 00003C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: TCPA 0x00000000BFF1B0E0 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: APIC 0x00000000BFF1B120 00006C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: DMAR 0x00000000BFF1B190 0000A8 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: HPET 0x00000000BFF1B240 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000042f5fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x42f5ef000-0x42f5f3fff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000042f5fffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009ffff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000bff01fff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000042f5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000042f5fffff]
[ 0.000000] On node 0 totalpages: 4125857
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 22 pages reserved
[ 0.000000] DMA zone: 3999 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12221 pages used for memmap
[ 0.000000] DMA32 zone: 782082 pages, LIFO batch:31
[ 0.000000] Normal zone: 52184 pages used for memmap
[ 0.000000] Normal zone: 3339776 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics memory at 0x00000000c0a00000-0x00000000ce9fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x508
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbff02000-0xbfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xce9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcea00000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfed3ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed8ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfed91fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed92000-0xffffffff]
[ 0.000000] e820: [mem 0xcea00000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 35 pages/cpu @ffff937e6f200000 s103512 r8192 d31656 u524288
[ 0.000000] pcpu-alloc: s103512 r8192 d31656 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 4061366
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.9.0-3-amd64 root=UUID=f545d1ea-3103-4100-8a85-54db5c9634ad ro quiet iomem=relaxed
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 16142820K/16503428K available (6179K kernel code, 1136K rwdata, 2852K rodata, 1392K init, 688K bss, 360608K reserved, 0K cma-reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:33024 nr_irqs:456 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2593.987 MHz processor
[ 0.000024] Calibrating delay loop (skipped), value calculated using timer frequency.. 5187.97 BogoMIPS (lpj=10375948)
[ 0.000026] pid_max: default: 32768 minimum: 301
[ 0.000040] ACPI: Core revision 20160831
[ 0.002567] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.002608] Security Framework initialized
[ 0.002609] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.002615] AppArmor: AppArmor disabled by boot time parameter
[ 0.003339] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.007066] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.008766] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.008779] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.009062] CPU: Physical Processor ID: 0
[ 0.009063] CPU: Processor Core ID: 0
[ 0.009069] mce: CPU supports 7 MCE banks
[ 0.009078] CPU0: Thermal monitoring enabled (TM1)
[ 0.009087] process: using mwait in idle threads
[ 0.009090] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.009090] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.009474] Freeing SMP alternatives memory: 24K (ffffffff9ec7a000 - ffffffff9ec80000)
[ 0.011571] ftrace: allocating 25141 entries in 99 pages
[ 0.022580] smpboot: Max logical packages: 2
[ 0.022584] DMAR: Host address width 36
[ 0.022586] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.022594] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[ 0.022595] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.022598] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[ 0.022599] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.022600] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.022601] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.022877] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.022878] x2apic enabled
[ 0.022884] Switched APIC routing to cluster x2apic.
[ 0.023339] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.063028] TSC deadline timer enabled
[ 0.063031] smpboot: CPU0: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[ 0.063034] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.063061] ... version: 3
[ 0.063061] ... bit width: 48
[ 0.063062] ... generic registers: 4
[ 0.063062] ... value mask: 0000ffffffffffff
[ 0.063063] ... max period: 00007fffffffffff
[ 0.063063] ... fixed-purpose events: 3
[ 0.063063] ... event mask: 000000070000000f
[ 0.063586] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.063683] x86: Booting SMP configuration:
[ 0.063684] .... node #0, CPUs: #1 #2 #3
[ 0.305158] x86: Booted up 1 node, 4 CPUs
[ 0.305161] smpboot: Total of 4 processors activated (20755.45 BogoMIPS)
[ 0.308309] devtmpfs: initialized
[ 0.308371] x86/mm: Memory block size: 128MB
[ 0.311650] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.311659] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.311697] pinctrl core: initialized pinctrl subsystem
[ 0.311796] NET: Registered protocol family 16
[ 0.327870] cpuidle: using governor ladder
[ 0.339877] cpuidle: using governor menu
[ 0.339921] ACPI: bus type PCI registered
[ 0.339924] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.340006] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.340007] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.340015] PCI: Using configuration type 1 for base access
[ 0.340048] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.356034] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.356253] ACPI: Added _OSI(Module Device)
[ 0.356254] ACPI: Added _OSI(Processor Device)
[ 0.356254] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.356255] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.356381] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.358328] ACPI : EC: EC started
[ 0.358328] ACPI : EC: interrupt blocked
[ 0.358371] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
[ 0.358372] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.358374] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions
[ 0.358374] ACPI: Interpreter enabled
[ 0.358389] ACPI: (supports S0 S3 S4 S5)
[ 0.358390] ACPI: Using IOAPIC for interrupt routing
[ 0.358408] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.362283] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.362286] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.362330] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.362338] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.362516] PCI host bridge to bus 0000:00
[ 0.362517] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.362518] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.362519] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.362520] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.362521] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.362522] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.362523] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.362524] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.362525] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.362526] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.362527] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.362528] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.362529] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.362530] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.362531] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.362532] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[ 0.362533] pci_bus 0000:00: root bus resource [mem 0xcea00000-0xf7ffffff window]
[ 0.362534] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[ 0.362535] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.362541] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.362624] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 0.362634] pci 0000:00:02.0: reg 0x10: [mem 0xf1000000-0xf13fffff 64bit]
[ 0.362639] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.362643] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
[ 0.362715] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000
[ 0.362723] pci 0000:00:04.0: reg 0x10: [mem 0xf1630000-0xf1637fff 64bit]
[ 0.362814] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.362833] pci 0000:00:14.0: reg 0x10: [mem 0xf1620000-0xf162ffff 64bit]
[ 0.362901] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.362935] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.363001] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.363079] pci 0000:00:16.0: reg 0x10: [mem 0xf1641000-0xf164100f 64bit]
[ 0.363409] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.363502] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[ 0.363517] pci 0000:00:19.0: reg 0x10: [mem 0xf1600000-0xf161ffff]
[ 0.363525] pci 0000:00:19.0: reg 0x14: [mem 0xf163c000-0xf163cfff]
[ 0.363533] pci 0000:00:19.0: reg 0x18: [io 0x3040-0x305f]
[ 0.363592] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.363655] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.363672] pci 0000:00:1a.0: reg 0x10: [mem 0xf163e000-0xf163e3ff]
[ 0.363753] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.363787] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.363825] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.363841] pci 0000:00:1b.0: reg 0x10: [mem 0xf1638000-0xf163bfff 64bit]
[ 0.363913] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.363951] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.363992] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.364116] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.364203] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 0.364326] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.364412] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[ 0.364536] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.364621] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.364639] pci 0000:00:1d.0: reg 0x10: [mem 0xf163f000-0xf163f3ff]
[ 0.364720] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.364754] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.364791] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100
[ 0.364951] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.364966] pci 0000:00:1f.2: reg 0x10: [io 0x3080-0x3087]
[ 0.364973] pci 0000:00:1f.2: reg 0x14: [io 0x3090-0x3093]
[ 0.364982] pci 0000:00:1f.2: reg 0x18: [io 0x3088-0x308f]
[ 0.364989] pci 0000:00:1f.2: reg 0x1c: [io 0x3094-0x3097]
[ 0.364997] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
[ 0.365006] pci 0000:00:1f.2: reg 0x24: [mem 0xf163d000-0xf163d7ff]
[ 0.365049] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.365112] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.365127] pci 0000:00:1f.3: reg 0x10: [mem 0xf1640000-0xf16400ff 64bit]
[ 0.365147] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.365320] pci 0000:01:00.0: [1180:e823] type 00 class 0x080501
[ 0.365351] pci 0000:01:00.0: MMC controller base frequency changed to 50Mhz.
[ 0.365388] pci 0000:01:00.0: reg 0x10: [mem 0xf1400000-0xf14000ff]
[ 0.365692] pci 0000:01:00.0: supports D1 D2
[ 0.365693] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.377215] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.377226] pci 0000:00:1c.0: bridge window [mem 0xf1400000-0xf14fffff]
[ 0.377343] pci 0000:02:00.0: [168c:0030] type 00 class 0x028000
[ 0.377385] pci 0000:02:00.0: reg 0x10: [mem 0xf1500000-0xf151ffff 64bit]
[ 0.377477] pci 0000:02:00.0: reg 0x30: [mem 0xf1520000-0xf152ffff pref]
[ 0.377594] pci 0000:02:00.0: supports D1
[ 0.377595] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
[ 0.389217] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.389227] pci 0000:00:1c.1: bridge window [mem 0xf1500000-0xf15fffff]
[ 0.389332] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.389336] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.389341] pci 0000:00:1c.2: bridge window [mem 0xf0800000-0xf0ffffff]
[ 0.389348] pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf07fffff 64bit pref]
[ 0.389461] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 12 14 15) *11
[ 0.389505] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.389546] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12 14 15) *11
[ 0.389587] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.389627] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12 14 15) *11
[ 0.389668] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.389707] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12 14 15) *11
[ 0.389748] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.390300] ACPI: Enabled 1 GPEs in block 00 to 3F
[ 0.390357] ACPI : EC: interrupt unblocked
[ 0.390362] ACPI : EC: event unblocked
[ 0.390369] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.390370] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
[ 0.390465] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.390466] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.390468] vgaarb: loaded
[ 0.390468] vgaarb: bridge control possible 0000:00:02.0
[ 0.390529] PCI: Using ACPI for IRQ routing
[ 0.392002] PCI: pci_cache_line_size set to 64 bytes
[ 0.392079] e820: reserve RAM buffer [mem 0xbff02000-0xbfffffff]
[ 0.392080] e820: reserve RAM buffer [mem 0x42f600000-0x42fffffff]
[ 0.392211] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.392215] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.394237] clocksource: Switched to clocksource hpet
[ 0.400161] VFS: Disk quotas dquot_6.6.0
[ 0.400186] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.400262] pnp: PnP ACPI init
[ 0.400345] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.400347] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.400348] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.400349] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.400350] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.400351] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.400352] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.400354] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.400355] system 00:00: [mem 0x20000000-0x201fffff] could not be reserved
[ 0.400356] system 00:00: [mem 0x40000000-0x401fffff] could not be reserved
[ 0.400359] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.400764] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.400767] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.400806] system 00:02: [io 0x0500-0x057f] has been reserved
[ 0.400807] system 00:02: [io 0x0480-0x04bf] has been reserved
[ 0.400809] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.400829] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.400859] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.400884] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.400908] pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active)
[ 0.400925] pnp: PnP ACPI: found 7 devices
[ 0.407113] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.407155] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.407162] pci 0000:00:1c.0: bridge window [mem 0xf1400000-0xf14fffff]
[ 0.407172] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.407178] pci 0000:00:1c.1: bridge window [mem 0xf1500000-0xf15fffff]
[ 0.407189] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.407192] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.407198] pci 0000:00:1c.2: bridge window [mem 0xf0800000-0xf0ffffff]
[ 0.407202] pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf07fffff 64bit pref]
[ 0.407211] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.407212] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.407213] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.407214] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.407215] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.407216] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.407217] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.407218] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.407219] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.407220] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.407221] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.407222] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[ 0.407223] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[ 0.407224] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[ 0.407225] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[ 0.407226] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
[ 0.407227] pci_bus 0000:00: resource 20 [mem 0xcea00000-0xf7ffffff window]
[ 0.407228] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff window]
[ 0.407229] pci_bus 0000:01: resource 1 [mem 0xf1400000-0xf14fffff]
[ 0.407231] pci_bus 0000:02: resource 1 [mem 0xf1500000-0xf15fffff]
[ 0.407232] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.407233] pci_bus 0000:03: resource 1 [mem 0xf0800000-0xf0ffffff]
[ 0.407234] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf07fffff 64bit pref]
[ 0.407319] NET: Registered protocol family 2
[ 0.407499] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.407692] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.407798] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.407825] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.407864] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.407935] NET: Registered protocol family 1
[ 0.407948] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.408518] PCI: CLS 64 bytes, default 64
[ 0.408562] Unpacking initramfs...
[ 0.735691] Freeing initrd memory: 20236K (ffff937a75869000 - ffff937a76c2c000)
[ 0.735777] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.735779] software IO TLB [mem 0xbbf02000-0xbff02000] (64MB) mapped at [ffff937afbf02000-ffff937afff01fff]
[ 0.736089] audit: initializing netlink subsys (disabled)
[ 0.736103] audit: type=2000 audit(1495965953.732:1): initialized
[ 0.736466] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[ 0.736511] zbud: loaded
[ 0.737160] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 0.737190] io scheduler noop registered
[ 0.737190] io scheduler deadline registered
[ 0.737202] io scheduler cfq registered (default)
[ 0.737933] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.737935] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.737940] pcie_pme 0000:00:1c.0:pcie001: service driver pcie_pme loaded
[ 0.737957] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[ 0.737958] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.737963] pcie_pme 0000:00:1c.1:pcie001: service driver pcie_pme loaded
[ 0.737979] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[ 0.737983] pcie_pme 0000:00:1c.2:pcie001: service driver pcie_pme loaded
[ 0.737990] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.738000] pciehp 0000:00:1c.2:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[ 0.738028] pciehp 0000:00:1c.2:pcie004: service driver pciehp loaded
[ 0.738033] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.738046] efifb: probing for efifb
[ 0.738058] efifb: framebuffer at 0xe0000000, using 4224k, total 4224k
[ 0.738059] efifb: mode is 1366x768x32, linelength=5632, pages=1
[ 0.738060] efifb: scrolling: redraw
[ 0.738061] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.740472] Console: switching to colour frame buffer device 170x48
[ 0.742679] fb0: EFI VGA frame buffer device
[ 0.742686] intel_idle: MWAIT substates: 0x21120
[ 0.742686] intel_idle: v0.4.1 model 0x3A
[ 0.742827] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.743163] GHES: HEST is not enabled!
[ 0.743216] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.743569] Linux agpgart interface v0.103
[ 0.758347] tpm_tis 00:06: 1.2 TPM (device-id 0x0, rev-id 78)
[ 0.870559] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 0.870560] AMD IOMMUv2 functionality not available on this system
[ 0.870911] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.872699] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.872703] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.872965] mousedev: PS/2 mouse device common for all mice
[ 0.873001] rtc_cmos 00:03: RTC can wake from S4
[ 0.873186] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.873219] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.873232] intel_pstate: Intel P-state driver initializing
[ 0.873626] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.873993] NET: Registered protocol family 10
[ 0.874401] mip6: Mobile IPv6
[ 0.874403] NET: Registered protocol family 17
[ 0.874407] mpls_gso: MPLS GSO support
[ 0.874749] microcode: sig=0x306a9, pf=0x10, revision=0x1b
[ 0.874853] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.874895] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.875157] registered taskstats version 1
[ 0.875184] zswap: loaded using pool lzo/zbud
[ 1.034873] rtc_cmos 00:03: setting system clock to 2017-05-28 10:05:54 UTC (1495965954)
[ 1.034929] PM: Hibernation image not present or could not be loaded.
[ 1.036904] Freeing unused kernel memory: 1392K (ffffffff9eb1e000 - ffffffff9ec7a000)
[ 1.036906] Write protecting the kernel read-only data: 12288k
[ 1.037725] Freeing unused kernel memory: 1996K (ffff937c9100d000 - ffff937c91200000)
[ 1.042958] Freeing unused kernel memory: 1244K (ffff937c914c9000 - ffff937c91600000)
[ 1.053490] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.141607] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.141690] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.141701] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.141713] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.142575] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.142610] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.143770] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.143830] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.143846] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.144148] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.169043] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.169045] ACPI: Thermal Zone [THM0] (47 C)
[ 1.169080] pps_core: LinuxPPS API ver. 1 registered
[ 1.169081] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 1.169410] PTP clock support registered
[ 1.169928] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.169930] ACPI: Thermal Zone [THM1] (27 C)
[ 1.170024] ACPI: bus type USB registered
[ 1.170049] usbcore: registered new interface driver usbfs
[ 1.170061] usbcore: registered new interface driver hub
[ 1.170084] usbcore: registered new device driver usb
[ 1.170522] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 1.170523] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.170596] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 1.170939] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.171115] ehci-pci: EHCI PCI platform driver
[ 1.173429] SCSI subsystem initialized
[ 1.173446] sdhci: Secure Digital Host Controller Interface driver
[ 1.173447] sdhci: Copyright(c) Pierre Ossman
[ 1.173724] sdhci-pci 0000:01:00.0: SDHCI controller found [1180:e823] (rev 4)
[ 1.175183] mmc0: SDHCI controller on PCI [0000:01:00.0] using DMA
[ 1.178461] libata version 3.00 loaded.
[ 1.184958] AVX version of gcm_enc/dec engaged.
[ 1.184959] AES CTR mode by8 optimization enabled
[ 1.315998] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[ 1.441176] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 3c:97:0e:b6:6c:5b
[ 1.441179] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 1.441240] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
[ 1.441510] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.441518] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 1.442628] xhci_hcd 0000:00:14.0: hcc params 0x200071a1 hci version 0x100 quirks 0x0000b930
[ 1.442638] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.442953] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.442957] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.442959] usb usb1: Product: xHCI Host Controller
[ 1.442961] usb usb1: Manufacturer: Linux 4.9.0-3-amd64 xhci-hcd
[ 1.442963] usb usb1: SerialNumber: 0000:00:14.0
[ 1.443249] hub 1-0:1.0: USB hub found
[ 1.443285] hub 1-0:1.0: 4 ports detected
[ 1.443682] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.443688] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.444113] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.444117] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.444119] usb usb2: Product: xHCI Host Controller
[ 1.444121] usb usb2: Manufacturer: Linux 4.9.0-3-amd64 xhci-hcd
[ 1.444123] usb usb2: SerialNumber: 0000:00:14.0
[ 1.444394] hub 2-0:1.0: USB hub found
[ 1.444435] hub 2-0:1.0: 4 ports detected
[ 1.445058] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.445071] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.445090] ehci-pci 0000:00:1a.0: debug port 2
[ 1.449003] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.449029] ehci-pci 0000:00:1a.0: irq 21, io mem 0xf163e000
[ 1.462362] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.462422] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.462424] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.462425] usb usb3: Product: EHCI Host Controller
[ 1.462427] usb usb3: Manufacturer: Linux 4.9.0-3-amd64 ehci_hcd
[ 1.462429] usb usb3: SerialNumber: 0000:00:1a.0
[ 1.462767] hub 3-0:1.0: USB hub found
[ 1.462782] hub 3-0:1.0: 3 ports detected
[ 1.463279] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.463287] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 1.463304] ehci-pci 0000:00:1d.0: debug port 2
[ 1.467222] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.467242] ehci-pci 0000:00:1d.0: irq 19, io mem 0xf163f000
[ 1.482346] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.482407] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.482409] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.482411] usb usb4: Product: EHCI Host Controller
[ 1.482412] usb usb4: Manufacturer: Linux 4.9.0-3-amd64 ehci_hcd
[ 1.482414] usb usb4: SerialNumber: 0000:00:1d.0
[ 1.482734] hub 4-0:1.0: USB hub found
[ 1.482748] hub 4-0:1.0: 3 ports detected
[ 1.483075] ahci 0000:00:1f.2: version 3.0
[ 1.483399] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 1.493530] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl SATA mode
[ 1.493533] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst
[ 1.494444] scsi host0: ahci
[ 1.494753] scsi host1: ahci
[ 1.494944] scsi host2: ahci
[ 1.495127] scsi host3: ahci
[ 1.495302] scsi host4: ahci
[ 1.495547] scsi host5: ahci
[ 1.495671] ata1: SATA max UDMA/133 abar m2048@0xf163d000 port 0xf163d100 irq 31
[ 1.495674] ata2: SATA max UDMA/133 abar m2048@0xf163d000 port 0xf163d180 irq 31
[ 1.495678] ata3: SATA max UDMA/133 abar m2048@0xf163d000 port 0xf163d200 irq 31
[ 1.495680] ata4: DUMMY
[ 1.495681] ata5: DUMMY
[ 1.495683] ata6: DUMMY
[ 1.495981] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 1.762342] tsc: Refined TSC clocksource calibration: 2594.107 MHz
[ 1.762353] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x25647d583cf, max_idle_ns: 440795304232 ns
[ 1.790354] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 1.809124] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.809936] ata1.00: ATA-9: WDC WD10SPCX-08HWST0, 01.01A01, max UDMA/133
[ 1.809939] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 1.810353] usb 4-1: new high-speed USB device number 2 using ehci-pci
[ 1.810800] ata1.00: configured for UDMA/133
[ 1.811206] scsi 0:0:0:0: Direct-Access ATA WDC WD10SPCX-08H 1A01 PQ: 0 ANSI: 5
[ 1.928851] psmouse serio1: synaptics: queried max coordinates: x [..5768], y [..5062]
[ 1.939069] usb 3-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.939072] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.939484] hub 3-1:1.0: USB hub found
[ 1.939632] hub 3-1:1.0: 6 ports detected
[ 1.959076] usb 4-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.959079] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.959149] psmouse serio1: synaptics: queried min coordinates: x [1174..], y [790..]
[ 1.959472] hub 4-1:1.0: USB hub found
[ 1.959608] hub 4-1:1.0: 8 ports detected
[ 2.017761] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd002a3/0x940300/0x123800/0x0, board id: 1611, fw id: 1099905
[ 2.017770] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[ 2.055472] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
[ 2.119136] random: fast init done
[ 2.161108] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.226374] usb 3-1.4: new full-speed USB device number 3 using ehci-pci
[ 2.246391] usb 4-1.6: new full-speed USB device number 3 using ehci-pci
[ 2.339679] usb 3-1.4: New USB device found, idVendor=0a5c, idProduct=217f
[ 2.339682] usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.339684] usb 3-1.4: Product: Broadcom Bluetooth Device
[ 2.339686] usb 3-1.4: Manufacturer: Broadcom Corp
[ 2.339687] usb 3-1.4: SerialNumber: 7CE9D3B7FC24
[ 2.360553] usb 4-1.6: New USB device found, idVendor=08e6, idProduct=34ec
[ 2.360556] usb 4-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.360558] usb 4-1.6: Product: GemPC Express
[ 2.360559] usb 4-1.6: Manufacturer: Gemplus
[ 2.418380] usb 3-1.6: new high-speed USB device number 4 using ehci-pci
[ 2.477375] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.479689] ata3.00: ATA-8: LITEONIT LSS-32L6G-HP, DS51704, max UDMA/133
[ 2.479692] ata3.00: 62533296 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 2.480174] ata3.00: configured for UDMA/133
[ 2.480562] scsi 2:0:0:0: Direct-Access ATA LITEONIT LSS-32L 704 PQ: 0 ANSI: 5
[ 2.519171] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 2.519175] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 2.519282] sd 0:0:0:0: [sda] Write Protect is off
[ 2.519286] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.519332] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.519388] sd 2:0:0:0: [sdb] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB)
[ 2.519556] sd 2:0:0:0: [sdb] Write Protect is off
[ 2.519561] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.519611] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.521822] sdb: sdb1 sdb2 sdb3 sdb5 sdb6 sdb7
[ 2.522775] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 2.534292] usb 3-1.6: New USB device found, idVendor=04f2, idProduct=b2ea
[ 2.534295] usb 3-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.534297] usb 3-1.6: Product: Integrated Camera
[ 2.534298] usb 3-1.6: Manufacturer: Chicony Electronics Co., Ltd.
[ 2.667360] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8
[ 2.668648] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.685108] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 2.786590] clocksource: Switched to clocksource tsc
[ 2.878706] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input3
[ 4.006052] md: linear personality registered for level -1
[ 4.008233] md: multipath personality registered for level -4
[ 4.010433] md: raid0 personality registered for level 0
[ 4.012470] md: raid1 personality registered for level 1
[ 4.082418] raid6: sse2x1 gen() 4598 MB/s
[ 4.150419] raid6: sse2x1 xor() 4749 MB/s
[ 4.218422] raid6: sse2x2 gen() 9647 MB/s
[ 4.286421] raid6: sse2x2 xor() 7898 MB/s
[ 4.354427] raid6: sse2x4 gen() 13089 MB/s
[ 4.422430] raid6: sse2x4 xor() 9698 MB/s
[ 4.422430] raid6: using algorithm sse2x4 gen() 13089 MB/s
[ 4.422431] raid6: .... xor() 9698 MB/s, rmw enabled
[ 4.422431] raid6: using ssse3x2 recovery algorithm
[ 4.422625] xor: automatically using best checksumming function avx
[ 4.422780] async_tx: api initialized (async)
[ 4.423999] md: raid6 personality registered for level 6
[ 4.424001] md: raid5 personality registered for level 5
[ 4.424001] md: raid4 personality registered for level 4
[ 4.429272] md: raid10 personality registered for level 10
[ 4.438962] Btrfs loaded, crc32c=crc32c-intel
[ 5.140015] PM: Starting manual resume from disk
[ 5.140020] PM: Hibernation image partition 8:2 present
[ 5.140022] PM: Looking for hibernation image.
[ 5.140209] PM: Image not found (code -22)
[ 5.140210] PM: Hibernation image not present or could not be loaded.
[ 5.298291] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[ 5.435788] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 5.442119] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 5.442290] systemd[1]: Detected architecture x86-64.
[ 5.442480] systemd[1]: Set hostname to <universi-mcbk52>.
[ 5.515429] random: crng init done
[ 5.598525] systemd[1]: transmission-daemon.service: Cannot add dependency job, ignoring: Unit transmission-daemon.service is masked.
[ 5.598665] systemd[1]: hdapsd.service: Cannot add dependency job, ignoring: Unit hdapsd.service is masked.
[ 5.599769] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 5.599946] systemd[1]: Listening on Journal Audit Socket.
[ 5.599969] systemd[1]: Reached target Libvirt guests shutdown.
[ 5.600125] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 5.600168] systemd[1]: Listening on udev Kernel Socket.
[ 5.616744] EXT4-fs (sdb5): re-mounted. Opts: discard,user_xattr,errors=remount-ro
[ 5.638802] RPC: Registered named UNIX socket transport module.
[ 5.638803] RPC: Registered udp transport module.
[ 5.638804] RPC: Registered tcp transport module.
[ 5.638804] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 5.644624] lp: driver loaded but no devices found
[ 5.646385] ppdev: user-space parallel port driver
[ 5.662752] Key type encrypted registered
[ 5.772546] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1f/PNP0C09:00/PNP0C0E:00/input/input4
[ 5.772550] ACPI: Sleep Button [SLPB]
[ 5.772724] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1f/PNP0C09:00/PNP0C0D:00/input/input5
[ 5.772727] ACPI: Lid Switch [LID]
[ 5.772789] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 5.772791] ACPI: Power Button [PWRF]
[ 5.792528] ACPI: Battery Slot [BAT0] (battery present)
[ 5.792627] ACPI: Battery Slot [BAT1] (battery absent)
[ 5.792756] ACPI: AC Adapter [AC] (off-line)
[ 5.847116] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 5.852518] Non-volatile memory driver v1.3
[ 5.859721] [drm] Initialized
[ 5.860029] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.860068] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 5.860449] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[ 5.860449] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 5.860450] thinkpad_acpi: ThinkPad BIOS CBET4000 4.6-196-g0fb6568444, EC G2HT35WW-3.22
[ 5.860450] thinkpad_acpi: Lenovo ThinkPad X230, model 23255A9
[ 5.861892] thinkpad_acpi: possible tablet mode switch found; ThinkPad in laptop mode
[ 5.861980] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 5.861980] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 5.864438] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 5.864885] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 5.865944] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input7
[ 5.908690] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 5.915151] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 5.915153] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 5.915153] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 5.915154] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ 5.941522] ath: phy0: Killer Wireless card detected
[ 5.952989] ath: phy0: ASPM enabled: 0x43
[ 5.952992] ath: EEPROM regdomain: 0x60
[ 5.952992] ath: EEPROM indicates we should expect a direct regpair map
[ 5.952994] ath: Country alpha2 being used: 00
[ 5.952995] ath: Regpair used: 0x60
[ 5.956046] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 5.956321] ieee80211 phy0: Atheros AR9300 Rev:3 mem=0xffffad9602520000, irq=17
[ 6.294426] EXT4-fs (sdb3): mounting ext2 file system using the ext4 subsystem
[ 6.298877] EXT4-fs (sdb3): mounted filesystem without journal. Opts: user_xattr
[ 6.300820] EXT4-fs (sdb7): mounted filesystem with ordered data mode. Opts: discard,user_xattr
[ 6.527198] Adding 8389628k swap on /dev/sda2. Priority:-1 extents:1 across:8389628k FS
[ 7.384739] media: Linux media interface: v0.10
[ 7.387596] Bluetooth: Core ver 2.22
[ 7.387612] NET: Registered protocol family 31
[ 7.387613] Bluetooth: HCI device and connection manager initialized
[ 7.387618] Bluetooth: HCI socket layer initialized
[ 7.387621] Bluetooth: L2CAP socket layer initialized
[ 7.387633] Bluetooth: SCO socket layer initialized
[ 7.391337] Linux video capture interface: v2.00
[ 7.459500] usbcore: registered new interface driver btusb
[ 7.466867] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b2ea)
[ 7.468535] uvcvideo 3-1.6:1.0: Entity type for entity Extension 4 was not initialized!
[ 7.468538] uvcvideo 3-1.6:1.0: Entity type for entity Extension 3 was not initialized!
[ 7.468540] uvcvideo 3-1.6:1.0: Entity type for entity Processing 2 was not initialized!
[ 7.468542] uvcvideo 3-1.6:1.0: Entity type for entity Camera 1 was not initialized!
[ 7.468658] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.6/3-1.6:1.0/input/input9
[ 7.468735] usbcore: registered new interface driver uvcvideo
[ 7.468736] USB Video Class driver (1.1.1)
[ 7.874625] mei_me 0000:00:16.0: wait hw ready failed
[ 7.874676] mei_me 0000:00:16.0: hw_start failed ret = -62
[ 7.874730] mei_me 0000:00:16.0: H_RST is set = 0x80000015
[ 8.539401] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: user_xattr
[ 9.220931] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: user_xattr
[ 9.297940] EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: discard,user_xattr
[ 9.320169] systemd-journald[273]: Received request to flush runtime journal from PID 1
[ 9.395702] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: user_xattr
[ 9.770197] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: user_xattr
[ 9.822754] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: user_xattr
[ 9.890689] mei_me 0000:00:16.0: wait hw ready failed
[ 9.890715] mei_me 0000:00:16.0: hw_start failed ret = -62
[ 9.890745] mei_me 0000:00:16.0: H_RST is set = 0x80000015
[ 10.073179] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: user_xattr
[ 10.448101] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 10.448103] Bluetooth: BNEP filters: protocol multicast
[ 10.448107] Bluetooth: BNEP socket layer initialized
[ 10.541834] nfc: nfc_init: NFC Core ver 0.1
[ 10.541869] NET: Registered protocol family 39
[ 12.002794] mei_me 0000:00:16.0: wait hw ready failed
[ 12.002820] mei_me 0000:00:16.0: hw_start failed ret = -62
[ 12.002839] mei_me 0000:00:16.0: reset: reached maximal consecutive resets: disabling the device
[ 12.002864] mei_me 0000:00:16.0: reset failed ret = -19
[ 12.002880] mei_me 0000:00:16.0: link layer initialization failed.
[ 12.002899] mei_me 0000:00:16.0: init hw failure.
[ 12.003000] mei_me 0000:00:16.0: initialization failed.
[ 12.003118] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20160831/utaddress-247)
[ 12.003123] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 12.003126] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20160831/utaddress-247)
[ 12.003130] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 12.003131] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20160831/utaddress-247)
[ 12.003135] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 12.003135] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20160831/utaddress-247)
[ 12.003139] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 12.003139] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 12.005653] [drm] Memory usable by graphics device = 2048M
[ 12.005656] checking generic (e0000000 420000) vs hw (e0000000 10000000)
[ 12.005657] fb: switching to inteldrmfb from EFI VGA
[ 12.005807] Console: switching to colour dummy device 80x25
[ 12.008988] [drm] Replacing VGA console driver
[ 12.011414] iTCO_vendor_support: vendor-support=0
[ 12.012221] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 12.012268] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560)
[ 12.013260] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 12.019889] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 12.019891] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 12.019893] snd_hda_codec_realtek hdaudioC0D0: hp_outs=2 (0x15/0x1b/0x0/0x0/0x0)
[ 12.019894] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 12.019895] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 12.019897] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 12.019898] snd_hda_codec_realtek hdaudioC0D0: Dock Mic=0x19
[ 12.019899] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 12.042811] intel_rapl: Found RAPL domain package
[ 12.042812] intel_rapl: Found RAPL domain core
[ 12.042813] intel_rapl: Found RAPL domain uncore
[ 12.066836] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 12.066837] [drm] Driver supports precise vblank timestamp query.
[ 12.066841] i915 0000:00:02.0: Invalid PCI ROM header signature: expecting 0xaa55, got 0x7b42
[ 12.066845] [drm] failed to find VBIOS tables
[ 12.067075] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 12.308924] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 12.310113] acpi device:03: registered as cooling_device5
[ 12.310187] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input15
[ 12.311213] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 12.311219] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
[ 12.496444] fbcon: inteldrmfb (fb0) is primary device
[ 12.968355] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 13.231023] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 13.242084] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 13.253680] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 13.271536] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 13.597887] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 13.682802] Console: switching to colour frame buffer device 170x48
[ 13.703312] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 13.740860] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 13.741921] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 13.742055] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 13.742183] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 13.742304] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 13.742425] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 13.742544] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 13.742670] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[ 14.435778] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 14.450969] Ebtables v2.0 registered
[ 17.447742] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 17.495991] wlan0: authenticate with f8:1a:67:5a:c4:75
[ 17.507179] wlan0: send auth to f8:1a:67:5a:c4:75 (try 1/3)
[ 17.509090] wlan0: authenticated
[ 17.511056] wlan0: associate with f8:1a:67:5a:c4:75 (try 1/3)
[ 17.512656] wlan0: RX AssocResp from f8:1a:67:5a:c4:75 (capab=0x11 status=0 aid=5)
[ 17.512789] wlan0: associated
[ 17.512824] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 17.523566] ath: EEPROM regdomain: 0x8348
[ 17.523567] ath: EEPROM indicates we should expect a country code
[ 17.523568] ath: doing EEPROM country->regdmn map search
[ 17.523569] ath: country maps to regdmn code: 0x3a
[ 17.523570] ath: Country alpha2 being used: US
[ 17.523570] ath: Regpair used: 0x3a
[ 17.523571] ath: regdomain 0x8348 dynamically updated by country IE
[ 22.066546] Bluetooth: RFCOMM TTY layer initialized
[ 22.066554] Bluetooth: RFCOMM socket layer initialized
[ 22.066558] Bluetooth: RFCOMM ver 1.11
[ 25.267407] usb 4-1.8: new high-speed USB device number 4 using ehci-pci
[ 25.375797] usb 4-1.8: New USB device found, idVendor=17ef, idProduct=100a
[ 25.375800] usb 4-1.8: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 25.376094] hub 4-1.8:1.0: USB hub found
[ 25.376168] hub 4-1.8:1.0: 6 ports detected