blob: 322200b1130c8cb01d3c4144d231297c2e22d4db [file] [log] [blame]
[ 0.000000] Linux version 4.9.0-2-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170221 (Debian 6.3.0-8) ) #1 SMP Debian 4.9.13-1 (2017-02-27)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.9.0-2-amd64 root=UUID=f545d1ea-3103-4100-8a85-54db5c9634ad ro quiet iomem=relaxed
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16
[ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff0dfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bff0e000-0x00000000bfffffff] type 16
[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000ce9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000042f5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: LENOVO 23255A9/23255A9, BIOS CBET4000 4.5-1390-gf0eda827b8-dirty 03/24/2017
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x42f600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-back
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0C0000000 mask FE0000000 uncachable
[ 0.000000] 1 base 0E0000000 mask FF0000000 write-combining
[ 0.000000] 2 base 0F0000000 mask FF0000000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: last_pfn = 0xbff0e max_arch_pfn = 0x400000000
[ 0.000000] Base memory trampoline at [ffff8ccc40099000] 99000 size 24576
[ 0.000000] BRK [0x221f2b000, 0x221f2bfff] PGTABLE
[ 0.000000] BRK [0x221f2c000, 0x221f2cfff] PGTABLE
[ 0.000000] BRK [0x221f2d000, 0x221f2dfff] PGTABLE
[ 0.000000] BRK [0x221f2e000, 0x221f2efff] PGTABLE
[ 0.000000] BRK [0x221f2f000, 0x221f2ffff] PGTABLE
[ 0.000000] BRK [0x221f30000, 0x221f30fff] PGTABLE
[ 0.000000] BRK [0x221f31000, 0x221f31fff] PGTABLE
[ 0.000000] BRK [0x221f32000, 0x221f32fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x3582b000-0x36c0cfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F64B0 000024 (v02 CORE )
[ 0.000000] ACPI: XSDT 0x00000000BFF220E0 00005C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: FACP 0x00000000BFF25700 0000F4 (v04 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: DSDT 0x00000000BFF22280 00347D (v02 COREv4 COREBOOT 20110725 INTL 20161222)
[ 0.000000] ACPI: FACS 0x00000000BFF22240 000040
[ 0.000000] ACPI: FACS 0x00000000BFF22240 000040
[ 0.000000] ACPI: SSDT 0x00000000BFF25800 00189E (v02 CORE COREBOOT 0000002A CORE 0000002A)
[ 0.000000] ACPI: MCFG 0x00000000BFF270A0 00003C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: TCPA 0x00000000BFF270E0 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: APIC 0x00000000BFF27120 00006C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: DMAR 0x00000000BFF27190 0000A8 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: HPET 0x00000000BFF27240 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000042f5fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x42f5ef000-0x42f5f3fff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000042f5fffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009ffff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000bff0dfff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000042f5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000042f5fffff]
[ 0.000000] On node 0 totalpages: 4125869
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 22 pages reserved
[ 0.000000] DMA zone: 3999 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12221 pages used for memmap
[ 0.000000] DMA32 zone: 782094 pages, LIFO batch:31
[ 0.000000] Normal zone: 52184 pages used for memmap
[ 0.000000] Normal zone: 3339776 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics memory at 0x00000000c0a00000-0x00000000ce9fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x508
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbff0e000-0xbfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xce9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcea00000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfed3ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed8ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfed91fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed92000-0xffffffff]
[ 0.000000] e820: [mem 0xcea00000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 35 pages/cpu @ffff8cd06f200000 s103384 r8192 d31784 u524288
[ 0.000000] pcpu-alloc: s103384 r8192 d31784 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 4061378
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.9.0-2-amd64 root=UUID=f545d1ea-3103-4100-8a85-54db5c9634ad ro quiet iomem=relaxed
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 16142756K/16503476K available (6142K kernel code, 1129K rwdata, 2844K rodata, 1392K init, 684K bss, 360720K reserved, 0K cma-reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:33024 nr_irqs:456 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2593.995 MHz processor
[ 0.000024] Calibrating delay loop (skipped), value calculated using timer frequency.. 5187.99 BogoMIPS (lpj=10375980)
[ 0.000026] pid_max: default: 32768 minimum: 301
[ 0.000038] ACPI: Core revision 20160831
[ 0.002583] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.002624] Security Framework initialized
[ 0.002625] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.002630] AppArmor: AppArmor disabled by boot time parameter
[ 0.003344] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.007062] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.008762] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.008775] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.009064] CPU: Physical Processor ID: 0
[ 0.009064] CPU: Processor Core ID: 0
[ 0.009071] mce: CPU supports 7 MCE banks
[ 0.009079] CPU0: Thermal monitoring enabled (TM1)
[ 0.009088] process: using mwait in idle threads
[ 0.009091] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.009092] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.009502] Freeing SMP alternatives memory: 24K (ffffffff90e78000 - ffffffff90e7e000)
[ 0.011634] ftrace: allocating 24999 entries in 98 pages
[ 0.022358] smpboot: Max logical packages: 2
[ 0.022363] DMAR: Host address width 36
[ 0.022364] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.022372] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[ 0.022372] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.022375] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[ 0.022377] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.022377] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.022378] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.022652] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.022653] x2apic enabled
[ 0.022658] Switched APIC routing to cluster x2apic.
[ 0.023116] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.062805] TSC deadline timer enabled
[ 0.062808] smpboot: CPU0: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[ 0.062811] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.062838] ... version: 3
[ 0.062838] ... bit width: 48
[ 0.062839] ... generic registers: 4
[ 0.062839] ... value mask: 0000ffffffffffff
[ 0.062840] ... max period: 00007fffffffffff
[ 0.062840] ... fixed-purpose events: 3
[ 0.062841] ... event mask: 000000070000000f
[ 0.063375] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.063472] x86: Booting SMP configuration:
[ 0.063473] .... node #0, CPUs: #1 #2 #3
[ 0.304933] x86: Booted up 1 node, 4 CPUs
[ 0.304935] smpboot: Total of 4 processors activated (20755.36 BogoMIPS)
[ 0.308089] devtmpfs: initialized
[ 0.308151] x86/mm: Memory block size: 128MB
[ 0.311478] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.311487] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.311524] pinctrl core: initialized pinctrl subsystem
[ 0.311625] NET: Registered protocol family 16
[ 0.327651] cpuidle: using governor ladder
[ 0.339659] cpuidle: using governor menu
[ 0.339706] ACPI: bus type PCI registered
[ 0.339709] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.339790] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.339792] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.339800] PCI: Using configuration type 1 for base access
[ 0.339835] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.355836] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.356042] ACPI: Added _OSI(Module Device)
[ 0.356043] ACPI: Added _OSI(Processor Device)
[ 0.356043] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.356044] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.356172] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.358108] ACPI : EC: EC started
[ 0.358151] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
[ 0.358152] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.358153] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions
[ 0.358154] ACPI: Interpreter enabled
[ 0.358170] ACPI: (supports S0 S3 S4 S5)
[ 0.358170] ACPI: Using IOAPIC for interrupt routing
[ 0.358189] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.529979] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.529983] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.530026] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.530034] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.530080] acpi PNP0A08:00: ignoring host bridge window [mem 0x000c4000-0x000c7fff window] (conflicts with Video ROM [mem 0x000c0000-0x000c69ff])
[ 0.530216] PCI host bridge to bus 0000:00
[ 0.530218] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.530219] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.530220] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.530221] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.530222] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.530223] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.530224] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.530225] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.530226] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.530227] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.530228] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.530229] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.530230] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.530231] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.530232] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[ 0.530233] pci_bus 0000:00: root bus resource [mem 0xcea00000-0xf7ffffff window]
[ 0.530234] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[ 0.530235] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.530241] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.530324] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 0.530333] pci 0000:00:02.0: reg 0x10: [mem 0xf1000000-0xf13fffff 64bit]
[ 0.530339] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.530343] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
[ 0.530415] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000
[ 0.530423] pci 0000:00:04.0: reg 0x10: [mem 0xf1630000-0xf1637fff 64bit]
[ 0.530514] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.530534] pci 0000:00:14.0: reg 0x10: [mem 0xf1620000-0xf162ffff 64bit]
[ 0.530601] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.530635] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.530702] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.530779] pci 0000:00:16.0: reg 0x10: [mem 0xf1641000-0xf164100f 64bit]
[ 0.531112] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.531207] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[ 0.531222] pci 0000:00:19.0: reg 0x10: [mem 0xf1600000-0xf161ffff]
[ 0.531230] pci 0000:00:19.0: reg 0x14: [mem 0xf163c000-0xf163cfff]
[ 0.531238] pci 0000:00:19.0: reg 0x18: [io 0x3040-0x305f]
[ 0.531296] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.531360] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.531377] pci 0000:00:1a.0: reg 0x10: [mem 0xf163e000-0xf163e3ff]
[ 0.531459] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.531493] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.531531] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.531547] pci 0000:00:1b.0: reg 0x10: [mem 0xf1638000-0xf163bfff 64bit]
[ 0.531618] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.531655] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.531695] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.531818] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.531901] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 0.532024] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.532110] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[ 0.532237] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.532319] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.532337] pci 0000:00:1d.0: reg 0x10: [mem 0xf163f000-0xf163f3ff]
[ 0.532418] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.532452] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.532489] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100
[ 0.532649] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.532664] pci 0000:00:1f.2: reg 0x10: [io 0x3080-0x3087]
[ 0.532672] pci 0000:00:1f.2: reg 0x14: [io 0x3090-0x3093]
[ 0.532680] pci 0000:00:1f.2: reg 0x18: [io 0x3088-0x308f]
[ 0.532688] pci 0000:00:1f.2: reg 0x1c: [io 0x3094-0x3097]
[ 0.532696] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
[ 0.532704] pci 0000:00:1f.2: reg 0x24: [mem 0xf163d000-0xf163d7ff]
[ 0.532748] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.532812] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.532827] pci 0000:00:1f.3: reg 0x10: [mem 0xf1640000-0xf16400ff 64bit]
[ 0.532847] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.533016] pci 0000:01:00.0: [1180:e823] type 00 class 0x080501
[ 0.533053] pci 0000:01:00.0: MMC controller base frequency changed to 50Mhz.
[ 0.533099] pci 0000:01:00.0: reg 0x10: [mem 0xf1400000-0xf14000ff]
[ 0.533406] pci 0000:01:00.0: supports D1 D2
[ 0.533407] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.545099] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.545110] pci 0000:00:1c.0: bridge window [mem 0xf1400000-0xf14fffff]
[ 0.545229] pci 0000:02:00.0: [168c:0030] type 00 class 0x028000
[ 0.545270] pci 0000:02:00.0: reg 0x10: [mem 0xf1500000-0xf151ffff 64bit]
[ 0.545362] pci 0000:02:00.0: reg 0x30: [mem 0xf1520000-0xf152ffff pref]
[ 0.545479] pci 0000:02:00.0: supports D1
[ 0.545479] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
[ 0.557102] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.557113] pci 0000:00:1c.1: bridge window [mem 0xf1500000-0xf15fffff]
[ 0.557218] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.557222] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.557226] pci 0000:00:1c.2: bridge window [mem 0xf0800000-0xf0ffffff]
[ 0.557234] pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf07fffff 64bit pref]
[ 0.557346] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 12 14 15) *11
[ 0.557390] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.557431] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12 14 15) *11
[ 0.557472] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.557513] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12 14 15) *11
[ 0.557553] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.557593] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12 14 15) *11
[ 0.557634] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.589389] ACPI: Enabled 1 GPEs in block 00 to 3F
[ 0.589458] ACPI : EC: event unblocked
[ 0.589464] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.589466] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
[ 0.589558] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.589559] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.589561] vgaarb: loaded
[ 0.589562] vgaarb: bridge control possible 0000:00:02.0
[ 0.589626] PCI: Using ACPI for IRQ routing
[ 0.591097] PCI: pci_cache_line_size set to 64 bytes
[ 0.591173] e820: reserve RAM buffer [mem 0xbff0e000-0xbfffffff]
[ 0.591174] e820: reserve RAM buffer [mem 0x42f600000-0x42fffffff]
[ 0.591306] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.591311] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.593332] clocksource: Switched to clocksource hpet
[ 0.599183] VFS: Disk quotas dquot_6.6.0
[ 0.599207] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.599283] pnp: PnP ACPI init
[ 0.599365] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.599367] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.599368] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.599369] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.599371] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.599372] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.599373] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.599375] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.599376] system 00:00: [mem 0x20000000-0x201fffff] could not be reserved
[ 0.599377] system 00:00: [mem 0x40000000-0x401fffff] could not be reserved
[ 0.599380] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.599821] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.599823] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.599862] system 00:02: [io 0x0500-0x057f] has been reserved
[ 0.599863] system 00:02: [io 0x0480-0x04bf] has been reserved
[ 0.599865] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.599886] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.599916] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.599943] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.599969] pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active)
[ 0.599986] pnp: PnP ACPI: found 7 devices
[ 0.606191] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.606232] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.606239] pci 0000:00:1c.0: bridge window [mem 0xf1400000-0xf14fffff]
[ 0.606251] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.606257] pci 0000:00:1c.1: bridge window [mem 0xf1500000-0xf15fffff]
[ 0.606268] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.606271] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.606277] pci 0000:00:1c.2: bridge window [mem 0xf0800000-0xf0ffffff]
[ 0.606281] pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf07fffff 64bit pref]
[ 0.606290] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.606291] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.606292] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.606293] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.606294] pci_bus 0000:00: resource 8 [mem 0x000c8000-0x000cbfff window]
[ 0.606295] pci_bus 0000:00: resource 9 [mem 0x000cc000-0x000cffff window]
[ 0.606296] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window]
[ 0.606297] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window]
[ 0.606298] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window]
[ 0.606299] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window]
[ 0.606300] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window]
[ 0.606301] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window]
[ 0.606302] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window]
[ 0.606303] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window]
[ 0.606304] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff window]
[ 0.606305] pci_bus 0000:00: resource 19 [mem 0xcea00000-0xf7ffffff window]
[ 0.606306] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed44fff window]
[ 0.606308] pci_bus 0000:01: resource 1 [mem 0xf1400000-0xf14fffff]
[ 0.606309] pci_bus 0000:02: resource 1 [mem 0xf1500000-0xf15fffff]
[ 0.606310] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.606311] pci_bus 0000:03: resource 1 [mem 0xf0800000-0xf0ffffff]
[ 0.606312] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf07fffff 64bit pref]
[ 0.606398] NET: Registered protocol family 2
[ 0.606578] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.606768] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.606875] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.606902] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.606942] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.607016] NET: Registered protocol family 1
[ 0.607028] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.607601] PCI: CLS 64 bytes, default 64
[ 0.607646] Unpacking initramfs...
[ 0.931695] Freeing initrd memory: 20360K (ffff8ccc7582b000 - ffff8ccc76c0d000)
[ 0.931737] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.931739] software IO TLB [mem 0xbbf0e000-0xbff0e000] (64MB) mapped at [ffff8cccfbf0e000-ffff8cccfff0dfff]
[ 0.932059] audit: initializing netlink subsys (disabled)
[ 0.932076] audit: type=2000 audit(1490451303.928:1): initialized
[ 0.932345] Initialise system trusted keyrings
[ 0.932432] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[ 0.932469] zbud: loaded
[ 0.972919] Key type asymmetric registered
[ 0.972920] Asymmetric key parser 'x509' registered
[ 0.972936] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.972962] io scheduler noop registered
[ 0.972963] io scheduler deadline registered
[ 0.972978] io scheduler cfq registered (default)
[ 0.973691] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.973693] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.973698] pcie_pme 0000:00:1c.0:pcie001: service driver pcie_pme loaded
[ 0.973714] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[ 0.973715] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.973719] pcie_pme 0000:00:1c.1:pcie001: service driver pcie_pme loaded
[ 0.973736] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[ 0.973740] pcie_pme 0000:00:1c.2:pcie001: service driver pcie_pme loaded
[ 0.973750] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.973762] pciehp 0000:00:1c.2:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[ 0.973788] pciehp 0000:00:1c.2:pcie004: service driver pciehp loaded
[ 0.973792] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.973802] efifb: probing for efifb
[ 0.973812] efifb: framebuffer at 0xe0000000, using 4160k, total 4160k
[ 0.973813] efifb: mode is 1376x768x32, linelength=5504, pages=1
[ 0.973813] efifb: scrolling: redraw
[ 0.973814] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.976043] Console: switching to colour frame buffer device 172x48
[ 0.978186] fb0: EFI VGA frame buffer device
[ 0.978192] intel_idle: MWAIT substates: 0x21120
[ 0.978193] intel_idle: v0.4.1 model 0x3A
[ 0.978333] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.978685] GHES: HEST is not enabled!
[ 0.978730] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.979078] Linux agpgart interface v0.103
[ 0.979115] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 0.979115] AMD IOMMUv2 functionality not available on this system
[ 0.979414] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.981099] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.981102] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.981212] mousedev: PS/2 mouse device common for all mice
[ 0.981249] rtc_cmos 00:03: RTC can wake from S4
[ 0.981388] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.981422] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.981429] intel_pstate: Intel P-state driver initializing
[ 0.981696] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.982105] NET: Registered protocol family 10
[ 0.982537] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.982785] mip6: Mobile IPv6
[ 0.982788] NET: Registered protocol family 17
[ 0.982793] mpls_gso: MPLS GSO support
[ 0.983131] microcode: sig=0x306a9, pf=0x10, revision=0x1b
[ 0.983235] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.983478] registered taskstats version 1
[ 0.983481] Loading compiled-in X.509 certificates
[ 0.986026] alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256))
[ 0.986564] Loaded X.509 cert 'Debian Project: Ben Hutchings: 008a018dca80932630'
[ 0.986598] zswap: loaded using pool lzo/zbud
[ 0.987571] rtc_cmos 00:03: setting system clock to 2017-03-25 14:15:04 UTC (1490451304)
[ 0.987638] PM: Hibernation image not present or could not be loaded.
[ 0.989778] Freeing unused kernel memory: 1392K (ffffffff90d1c000 - ffffffff90e78000)
[ 0.989780] Write protecting the kernel read-only data: 12288k
[ 0.990624] Freeing unused kernel memory: 2032K (ffff8cce61604000 - ffff8cce61800000)
[ 0.995654] Freeing unused kernel memory: 1252K (ffff8cce61ac7000 - ffff8cce61c00000)
[ 1.006983] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.092889] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.093010] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.093027] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.093045] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.094436] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.094494] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.096430] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.096532] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.096557] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.097058] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.128619] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
[ 1.136175] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.136178] ACPI: Thermal Zone [THM0] (62 C)
[ 1.137046] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.137048] ACPI: Thermal Zone [THM1] (27 C)
[ 1.138858] pps_core: LinuxPPS API ver. 1 registered
[ 1.138859] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 1.139647] PTP clock support registered
[ 1.144903] ACPI: bus type USB registered
[ 1.144941] usbcore: registered new interface driver usbfs
[ 1.144958] usbcore: registered new interface driver hub
[ 1.144997] usbcore: registered new device driver usb
[ 1.146732] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 1.146734] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.146841] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 1.146851] sdhci: Secure Digital Host Controller Interface driver
[ 1.146852] sdhci: Copyright(c) Pierre Ossman
[ 1.148489] sdhci-pci 0000:01:00.0: SDHCI controller found [1180:e823] (rev 4)
[ 1.152049] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.152806] ehci-pci: EHCI PCI platform driver
[ 1.163702] SCSI subsystem initialized
[ 1.170093] mmc0: SDHCI controller on PCI [0000:01:00.0] using DMA
[ 1.171460] AVX version of gcm_enc/dec engaged.
[ 1.171461] AES CTR mode by8 optimization enabled
[ 1.173844] libata version 3.00 loaded.
[ 1.291405] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[ 1.416683] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 3c:97:0e:b6:6c:5b
[ 1.416686] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 1.416746] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
[ 1.417097] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.417122] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.417145] ehci-pci 0000:00:1a.0: debug port 2
[ 1.421079] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.421124] ehci-pci 0000:00:1a.0: irq 21, io mem 0xf163e000
[ 1.433425] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.433515] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.433517] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.433519] usb usb1: Product: EHCI Host Controller
[ 1.433521] usb usb1: Manufacturer: Linux 4.9.0-2-amd64 ehci_hcd
[ 1.433523] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.433882] hub 1-0:1.0: USB hub found
[ 1.433899] hub 1-0:1.0: 3 ports detected
[ 1.434411] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.434419] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.434436] ehci-pci 0000:00:1d.0: debug port 2
[ 1.438352] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.438379] ehci-pci 0000:00:1d.0: irq 19, io mem 0xf163f000
[ 1.453425] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.453491] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.453494] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.453496] usb usb2: Product: EHCI Host Controller
[ 1.453497] usb usb2: Manufacturer: Linux 4.9.0-2-amd64 ehci_hcd
[ 1.453499] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.453845] hub 2-0:1.0: USB hub found
[ 1.453860] hub 2-0:1.0: 3 ports detected
[ 1.454453] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.454465] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 1.455592] xhci_hcd 0000:00:14.0: hcc params 0x200071a1 hci version 0x100 quirks 0x0000b930
[ 1.455601] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.455881] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.455885] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.455888] usb usb3: Product: xHCI Host Controller
[ 1.455891] usb usb3: Manufacturer: Linux 4.9.0-2-amd64 xhci-hcd
[ 1.455894] usb usb3: SerialNumber: 0000:00:14.0
[ 1.456173] hub 3-0:1.0: USB hub found
[ 1.456219] hub 3-0:1.0: 4 ports detected
[ 1.456521] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.456527] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 1.456714] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.456716] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.456718] usb usb4: Product: xHCI Host Controller
[ 1.456719] usb usb4: Manufacturer: Linux 4.9.0-2-amd64 xhci-hcd
[ 1.456721] usb usb4: SerialNumber: 0000:00:14.0
[ 1.456909] hub 4-0:1.0: USB hub found
[ 1.456930] hub 4-0:1.0: 4 ports detected
[ 1.457478] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 1.459171] ahci 0000:00:1f.2: version 3.0
[ 1.459495] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 1.469616] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl SATA mode
[ 1.469620] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst
[ 1.471111] scsi host0: ahci
[ 1.471354] scsi host1: ahci
[ 1.471596] scsi host2: ahci
[ 1.471786] scsi host3: ahci
[ 1.471962] scsi host4: ahci
[ 1.472139] scsi host5: ahci
[ 1.472253] ata1: SATA max UDMA/133 abar m2048@0xf163d000 port 0xf163d100 irq 31
[ 1.472257] ata2: SATA max UDMA/133 abar m2048@0xf163d000 port 0xf163d180 irq 31
[ 1.472259] ata3: SATA max UDMA/133 abar m2048@0xf163d000 port 0xf163d200 irq 31
[ 1.472261] ata4: DUMMY
[ 1.472262] ata5: DUMMY
[ 1.472263] ata6: DUMMY
[ 1.761407] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.781432] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.784403] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.785186] ata1.00: ATA-9: WDC WD10SPCX-08HWST0, 01.01A01, max UDMA/133
[ 1.785189] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 1.785958] ata1.00: configured for UDMA/133
[ 1.786347] scsi 0:0:0:0: Direct-Access ATA WDC WD10SPCX-08H 1A01 PQ: 0 ANSI: 5
[ 1.909878] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.909881] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.910312] hub 1-1:1.0: USB hub found
[ 1.910468] hub 1-1:1.0: 6 ports detected
[ 1.929876] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.929879] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.930312] hub 2-1:1.0: USB hub found
[ 1.930455] hub 2-1:1.0: 8 ports detected
[ 1.942801] psmouse serio1: synaptics: queried max coordinates: x [..5768], y [..5062]
[ 1.953455] tsc: Refined TSC clocksource calibration: 2594.107 MHz
[ 1.953467] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x25647d583cf, max_idle_ns: 440795304232 ns
[ 1.972108] psmouse serio1: synaptics: queried min coordinates: x [1174..], y [790..]
[ 2.018426] random: fast init done
[ 2.031480] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd002a3/0x940300/0x123800/0x0, board id: 1611, fw id: 1099905
[ 2.031488] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[ 2.070233] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
[ 2.132260] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.197448] usb 1-1.4: new full-speed USB device number 3 using ehci-pci
[ 2.217465] usb 2-1.6: new full-speed USB device number 3 using ehci-pci
[ 2.310350] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=217f
[ 2.310353] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.310356] usb 1-1.4: Product: Broadcom Bluetooth Device
[ 2.310357] usb 1-1.4: Manufacturer: Broadcom Corp
[ 2.310374] usb 1-1.4: SerialNumber: 7CE9D3B7FC24
[ 2.331476] usb 2-1.6: New USB device found, idVendor=08e6, idProduct=34ec
[ 2.331494] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.331496] usb 2-1.6: Product: GemPC Express
[ 2.331498] usb 2-1.6: Manufacturer: Gemplus
[ 2.389461] usb 1-1.6: new high-speed USB device number 4 using ehci-pci
[ 2.409473] usb 2-1.8: new high-speed USB device number 4 using ehci-pci
[ 2.448349] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.450677] ata3.00: ATA-8: LITEONIT LSS-32L6G-HP, DS51704, max UDMA/133
[ 2.450680] ata3.00: 62533296 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 2.451119] ata3.00: configured for UDMA/133
[ 2.451560] scsi 2:0:0:0: Direct-Access ATA LITEONIT LSS-32L 704 PQ: 0 ANSI: 5
[ 2.488238] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 2.488243] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 2.488308] sd 0:0:0:0: [sda] Write Protect is off
[ 2.488310] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.488339] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.488375] sd 2:0:0:0: [sdb] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB)
[ 2.488502] sd 2:0:0:0: [sdb] Write Protect is off
[ 2.488506] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.488548] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.490498] sdb: sdb1 sdb2 sdb3 sdb5 sdb6 sdb7
[ 2.491303] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 2.505214] usb 1-1.6: New USB device found, idVendor=04f2, idProduct=b2ea
[ 2.505217] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.505220] usb 1-1.6: Product: Integrated Camera
[ 2.505221] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd.
[ 2.517902] usb 2-1.8: New USB device found, idVendor=17ef, idProduct=100a
[ 2.517905] usb 2-1.8: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.518309] hub 2-1.8:1.0: USB hub found
[ 2.518506] hub 2-1.8:1.0: 6 ports detected
[ 2.633301] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8
[ 2.634654] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.702447] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 2.896996] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input3
[ 2.977641] clocksource: Switched to clocksource tsc
[ 3.940993] md: linear personality registered for level -1
[ 3.943679] md: multipath personality registered for level -4
[ 3.946278] md: raid0 personality registered for level 0
[ 3.949724] md: raid1 personality registered for level 1
[ 4.021490] raid6: sse2x1 gen() 4787 MB/s
[ 4.089490] raid6: sse2x1 xor() 4890 MB/s
[ 4.157493] raid6: sse2x2 gen() 9866 MB/s
[ 4.225495] raid6: sse2x2 xor() 7958 MB/s
[ 4.293496] raid6: sse2x4 gen() 13087 MB/s
[ 4.361498] raid6: sse2x4 xor() 9697 MB/s
[ 4.361499] raid6: using algorithm sse2x4 gen() 13087 MB/s
[ 4.361499] raid6: .... xor() 9697 MB/s, rmw enabled
[ 4.361500] raid6: using ssse3x2 recovery algorithm
[ 4.361966] xor: automatically using best checksumming function avx
[ 4.362348] async_tx: api initialized (async)
[ 4.365833] md: raid6 personality registered for level 6
[ 4.365834] md: raid5 personality registered for level 5
[ 4.365835] md: raid4 personality registered for level 4
[ 4.368998] md: raid10 personality registered for level 10
[ 4.385984] Btrfs loaded, crc32c=crc32c-intel
[ 5.117499] PM: Starting manual resume from disk
[ 5.117505] PM: Hibernation image partition 8:2 present
[ 5.117506] PM: Looking for hibernation image.
[ 5.134521] PM: Image not found (code -22)
[ 5.134523] PM: Hibernation image not present or could not be loaded.
[ 5.242485] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[ 5.373676] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 5.380047] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 5.380194] systemd[1]: Detected architecture x86-64.
[ 5.380374] systemd[1]: Set hostname to <universi-mcbk52>.
[ 5.451839] random: crng init done
[ 5.531955] systemd[1]: transmission-daemon.service: Cannot add dependency job, ignoring: Unit transmission-daemon.service is masked.
[ 5.531997] systemd[1]: hdapsd.service: Cannot add dependency job, ignoring: Unit hdapsd.service is masked.
[ 5.533107] systemd[1]: Listening on Journal Socket (/dev/log).
[ 5.533229] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 5.533263] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 5.533452] systemd[1]: Created slice System Slice.
[ 5.534025] systemd[1]: Mounting RPC Pipe File System...
[ 5.552384] EXT4-fs (sdb5): re-mounted. Opts: discard,user_xattr,errors=remount-ro
[ 5.558798] lp: driver loaded but no devices found
[ 5.561857] ppdev: user-space parallel port driver
[ 5.567888] RPC: Registered named UNIX socket transport module.
[ 5.567890] RPC: Registered udp transport module.
[ 5.567890] RPC: Registered tcp transport module.
[ 5.567891] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 5.701835] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1f/PNP0C09:00/PNP0C0E:00/input/input4
[ 5.701839] ACPI: Sleep Button [SLPB]
[ 5.701993] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1f/PNP0C09:00/PNP0C0D:00/input/input5
[ 5.702074] ACPI: Lid Switch [LID]
[ 5.702131] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 5.702133] ACPI: Power Button [PWRF]
[ 5.721047] Non-volatile memory driver v1.3
[ 5.721338] ACPI: AC Adapter [AC] (on-line)
[ 5.721642] tpm_tis 00:06: 1.2 TPM (device-id 0x0, rev-id 78)
[ 5.726475] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[ 5.726476] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 5.726477] thinkpad_acpi: ThinkPad BIOS CBET4000 4.5-1390-gf0eda827b8-dirty, EC G2HT35WW-3.22
[ 5.726478] thinkpad_acpi: Lenovo ThinkPad X230, model 23255A9
[ 5.729237] [drm] Initialized
[ 5.730898] ACPI: Battery Slot [BAT0] (battery present)
[ 5.731008] ACPI: Battery Slot [BAT1] (battery absent)
[ 5.733445] thinkpad_acpi: possible tablet mode switch found; ThinkPad in laptop mode
[ 5.733526] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 5.733526] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 5.737755] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 5.737860] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 5.740025] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input7
[ 5.821601] tpm tpm0: A TPM error (6) occurred attempting to read a pcr value
[ 5.821643] tpm tpm0: TPM is disabled/deactivated (0x6)
[ 5.833933] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.834515] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 6.252590] EXT4-fs (sdb3): mounting ext2 file system using the ext4 subsystem
[ 6.255470] EXT4-fs (sdb3): mounted filesystem without journal. Opts: user_xattr
[ 6.258772] EXT4-fs (sdb7): mounted filesystem with ordered data mode. Opts: discard,user_xattr
[ 6.316915] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 6.343192] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 6.343194] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 6.343194] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 6.343195] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ 6.719755] Adding 8389628k swap on /dev/sda2. Priority:-1 extents:1 across:8389628k FS
[ 7.352893] Bluetooth: Core ver 2.22
[ 7.352917] NET: Registered protocol family 31
[ 7.352919] Bluetooth: HCI device and connection manager initialized
[ 7.352924] Bluetooth: HCI socket layer initialized
[ 7.352928] Bluetooth: L2CAP socket layer initialized
[ 7.352938] Bluetooth: SCO socket layer initialized
[ 7.430705] usbcore: registered new interface driver btusb
[ 7.629926] media: Linux media interface: v0.10
[ 7.636971] Linux video capture interface: v2.00
[ 7.714081] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b2ea)
[ 7.716102] uvcvideo 1-1.6:1.0: Entity type for entity Extension 4 was not initialized!
[ 7.716105] uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized!
[ 7.716106] uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized!
[ 7.716108] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized!
[ 7.716202] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input9
[ 7.716264] usbcore: registered new interface driver uvcvideo
[ 7.716265] USB Video Class driver (1.1.1)
[ 7.745693] mei_me 0000:00:16.0: wait hw ready failed
[ 7.745740] mei_me 0000:00:16.0: hw_start failed ret = -62
[ 7.745781] mei_me 0000:00:16.0: H_RST is set = 0x80000015
[ 7.747789] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: user_xattr
[ 7.792493] EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: discard,user_xattr
[ 7.796162] systemd-journald[279]: Received request to flush runtime journal from PID 1
[ 8.260980] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: user_xattr
[ 8.505183] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: user_xattr
[ 9.284089] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: user_xattr
[ 9.741352] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: user_xattr
[ 9.761777] mei_me 0000:00:16.0: wait hw ready failed
[ 9.761781] mei_me 0000:00:16.0: hw_start failed ret = -62
[ 9.761797] mei_me 0000:00:16.0: H_RST is set = 0x80000015
[ 9.956484] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: user_xattr
[ 10.352048] nfc: nfc_init: NFC Core ver 0.1
[ 10.352134] NET: Registered protocol family 39
[ 10.382964] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 10.382966] Bluetooth: BNEP filters: protocol multicast
[ 10.382969] Bluetooth: BNEP socket layer initialized
[ 11.777827] mei_me 0000:00:16.0: wait hw ready failed
[ 11.777859] mei_me 0000:00:16.0: hw_start failed ret = -62
[ 11.777889] mei_me 0000:00:16.0: reset: reached maximal consecutive resets: disabling the device
[ 11.777933] mei_me 0000:00:16.0: reset failed ret = -19
[ 11.777960] mei_me 0000:00:16.0: link layer initialization failed.
[ 11.777991] mei_me 0000:00:16.0: init hw failure.
[ 11.778124] mei_me 0000:00:16.0: initialization failed.
[ 11.778199] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 11.778539] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20160831/utaddress-247)
[ 11.778545] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 11.778548] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20160831/utaddress-247)
[ 11.778550] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 11.778551] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20160831/utaddress-247)
[ 11.778554] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 11.778555] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20160831/utaddress-247)
[ 11.778557] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 11.778558] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 11.778903] [drm] Memory usable by graphics device = 2048M
[ 11.778905] checking generic (e0000000 410000) vs hw (e0000000 10000000)
[ 11.778906] fb: switching to inteldrmfb from EFI VGA
[ 11.778952] Console: switching to colour dummy device 80x25
[ 11.779479] [drm] Replacing VGA console driver
[ 11.787237] iTCO_vendor_support: vendor-support=0
[ 11.789900] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 11.789944] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560)
[ 11.791510] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 11.800028] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 11.800030] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 11.800032] snd_hda_codec_realtek hdaudioC0D0: hp_outs=2 (0x15/0x1b/0x0/0x0/0x0)
[ 11.800033] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 11.800034] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 11.800036] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 11.800038] snd_hda_codec_realtek hdaudioC0D0: Dock Mic=0x19
[ 11.800039] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 11.837892] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 11.837893] [drm] Driver supports precise vblank timestamp query.
[ 11.838182] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 11.851177] ath: phy0: Killer Wireless card detected
[ 11.861712] ath: EEPROM regdomain: 0x60
[ 11.861714] ath: EEPROM indicates we should expect a direct regpair map
[ 11.861716] ath: Country alpha2 being used: 00
[ 11.861716] ath: Regpair used: 0x60
[ 11.864834] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 11.865117] ieee80211 phy0: Atheros AR9300 Rev:3 mem=0xffffb56f42080000, irq=17
[ 12.080802] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 12.082514] acpi device:03: registered as cooling_device4
[ 12.082596] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input15
[ 12.083942] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 12.083949] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
[ 12.087555] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 12.088786] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 12.088873] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 12.088954] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 12.089032] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 12.089109] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 12.089186] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 12.089259] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[ 12.146217] intel_rapl: Found RAPL domain package
[ 12.146219] intel_rapl: Found RAPL domain core
[ 12.146220] intel_rapl: Found RAPL domain uncore
[ 12.267452] fbcon: inteldrmfb (fb0) is primary device
[ 12.573507] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 12.830010] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 12.854433] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 12.865115] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 12.881431] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 13.135762] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 13.454519] Console: switching to colour frame buffer device 172x48
[ 13.475602] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 13.837673] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 13.854628] Ebtables v2.0 registered
[ 17.042055] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 17.070296] wlan0: authenticate with f8:1a:67:5a:c4:75
[ 17.081135] wlan0: send auth to f8:1a:67:5a:c4:75 (try 1/3)
[ 17.082451] wlan0: authenticated
[ 17.086081] wlan0: associate with f8:1a:67:5a:c4:75 (try 1/3)
[ 17.087532] wlan0: RX AssocResp from f8:1a:67:5a:c4:75 (capab=0x11 status=0 aid=2)
[ 17.087660] wlan0: associated
[ 17.087693] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 17.158487] ath: EEPROM regdomain: 0x809c
[ 17.158488] ath: EEPROM indicates we should expect a country code
[ 17.158488] ath: doing EEPROM country->regdmn map search
[ 17.158489] ath: country maps to regdmn code: 0x52
[ 17.158490] ath: Country alpha2 being used: CN
[ 17.158490] ath: Regpair used: 0x52
[ 17.158491] ath: regdomain 0x809c dynamically updated by country IE
[ 19.447746] systemd[1]: apt-daily.timer: Adding 11h 21min 55.459507s random time.
[ 19.810771] systemd[1]: apt-daily.timer: Adding 9h 12min 20.935474s random time.
[ 21.910273] Bluetooth: RFCOMM TTY layer initialized
[ 21.910281] Bluetooth: RFCOMM socket layer initialized
[ 21.910288] Bluetooth: RFCOMM ver 1.11