blob: 20f1a28bf22bbffca139114ab7b4a7505ea16272 [file] [log] [blame]
[ 2.180411] psmouse serio1: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 2.194115] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input8
[ 2.498997] Console: switching to colour frame buffer device 170x48
[ 2.505497] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 2.532644] clocksource: Switched to clocksource tsc
[ 2.593255] fbcondecor: console 0 using theme 'natural_gentoo'
[ 2.639337] fbcondecor: switched decor state to 'on' on console 0
[ 12.847210] Freeing unused kernel memory: 19432K (ffffffff81989000 - ffffffff82c83000)
[ 13.411927] libata version 3.00 loaded.
[ 13.493173] ahci 0000:00:1f.2: version 3.0
[ 13.493286] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 13.522998] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl SATA mode
[ 13.523003] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst
[ 13.524276] scsi host0: ahci
[ 13.524450] scsi host1: ahci
[ 13.524983] scsi host2: ahci
[ 13.525252] scsi host3: ahci
[ 13.525728] scsi host4: ahci
[ 13.526164] scsi host5: ahci
[ 13.526235] ata1: SATA max UDMA/133 abar m2048@0xe163d000 port 0xe163d100 irq 30
[ 13.526238] ata2: SATA max UDMA/133 abar m2048@0xe163d000 port 0xe163d180 irq 30
[ 13.526241] ata3: SATA max UDMA/133 abar m2048@0xe163d000 port 0xe163d200 irq 30
[ 13.526242] ata4: DUMMY
[ 13.526243] ata5: DUMMY
[ 13.526243] ata6: DUMMY
[ 13.873029] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 13.873877] ata1.00: READ LOG DMA EXT failed, trying unqueued
[ 13.873928] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 13.873932] ata1.00: ATA-9: Samsung SSD 840 PRO Series, DXM03B0Q, max UDMA/133
[ 13.873935] ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 13.875041] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 13.875147] ata1.00: configured for UDMA/133
[ 13.893331] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 3B0Q PQ: 0 ANSI: 5
[ 13.893803] ata1.00: Enabling discard_zeroes_data
[ 13.893847] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[ 13.894174] sd 0:0:0:0: [sda] Write Protect is off
[ 13.894184] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 13.894248] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 13.894494] ata1.00: Enabling discard_zeroes_data
[ 13.896222] sda: sda1 sda2 sda3
[ 13.896882] ata1.00: Enabling discard_zeroes_data
[ 13.897039] sd 0:0:0:0: [sda] Attached SCSI disk
[ 14.243056] ata2: SATA link down (SStatus 0 SControl 300)
[ 14.593056] ata3: SATA link down (SStatus 0 SControl 300)
[ 14.617284] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 14.679114] scsi: <fdomain> Detection failed (no card)
[ 14.765915] GDT-HA: Storage RAID Controller Driver. Version: 3.05
[ 14.851960] imm: Version 2.05 (for Linux 2.4.0)
[ 14.948419] Fusion MPT base driver 3.04.20
[ 14.948422] Copyright (c) 1999-2008 LSI Corporation
[ 14.953133] Fusion MPT SPI Host driver 3.04.20
[ 14.955997] Fusion MPT FC Host driver 3.04.20
[ 14.958908] Fusion MPT SAS Host driver 3.04.20
[ 14.967232] 3ware Storage Controller device driver for Linux v1.26.02.003.
[ 14.968984] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
[ 14.976593] HP CISS Driver (v 3.6.26)
[ 14.987533] Adaptec aacraid driver 1.2-1[41010]-ms
[ 14.990657] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[ 14.990957] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[ 14.994040] megasas: 06.808.16.00-rc1
[ 14.996848] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.26-k.
[ 15.008474] Emulex LightPulse Fibre Channel SCSI driver 11.0.0.0.
[ 15.008475] Copyright(c) 2004-2015 Emulex. All rights reserved.
[ 15.012227] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
[ 15.021887] ACPI: bus type USB registered
[ 15.021922] usbcore: registered new interface driver usbfs
[ 15.021934] usbcore: registered new interface driver hub
[ 15.021955] usbcore: registered new device driver usb
[ 15.022295] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 15.022431] ehci-pci: EHCI PCI platform driver
[ 15.022585] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 15.022591] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 15.022604] ehci-pci 0000:00:1a.0: debug port 2
[ 15.026516] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 15.026530] ehci-pci 0000:00:1a.0: irq 21, io mem 0xe163e000
[ 15.043023] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 15.043293] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 15.043296] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 15.043298] usb usb1: Product: EHCI Host Controller
[ 15.043309] usb usb1: Manufacturer: Linux 4.4.2-gentoo ehci_hcd
[ 15.043311] usb usb1: SerialNumber: 0000:00:1a.0
[ 15.043611] hub 1-0:1.0: USB hub found
[ 15.043626] hub 1-0:1.0: 3 ports detected
[ 15.044123] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 15.044132] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 15.044146] ehci-pci 0000:00:1d.0: debug port 2
[ 15.048061] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 15.048076] ehci-pci 0000:00:1d.0: irq 19, io mem 0xe163f000
[ 15.063027] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 15.063122] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 15.063125] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 15.063132] usb usb2: Product: EHCI Host Controller
[ 15.063135] usb usb2: Manufacturer: Linux 4.4.2-gentoo ehci_hcd
[ 15.063148] usb usb2: SerialNumber: 0000:00:1d.0
[ 15.063429] hub 2-0:1.0: USB hub found
[ 15.063445] hub 2-0:1.0: 3 ports detected
[ 15.093771] usbcore: registered new interface driver usb-storage
[ 15.095975] uhci_hcd: USB Universal Host Controller Interface driver
[ 15.098399] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 15.103547] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 15.103557] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 15.104705] xhci_hcd 0000:00:14.0: hcc params 0x200071a1 hci version 0x100 quirks 0x0000b930
[ 15.104713] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 15.104986] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 15.104988] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 15.104990] usb usb3: Product: xHCI Host Controller
[ 15.104992] usb usb3: Manufacturer: Linux 4.4.2-gentoo xhci-hcd
[ 15.104994] usb usb3: SerialNumber: 0000:00:14.0
[ 15.105193] hub 3-0:1.0: USB hub found
[ 15.105211] hub 3-0:1.0: 4 ports detected
[ 15.105404] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 15.105410] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 15.105499] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 15.105501] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 15.105503] usb usb4: Product: xHCI Host Controller
[ 15.105505] usb usb4: Manufacturer: Linux 4.4.2-gentoo xhci-hcd
[ 15.105506] usb usb4: SerialNumber: 0000:00:14.0
[ 15.105679] hub 4-0:1.0: USB hub found
[ 15.105695] hub 4-0:1.0: 4 ports detected
[ 15.114959] usbcore: registered new interface driver usbhid
[ 15.114961] usbhid: USB HID core driver
[ 15.216548] device-mapper: uevent: version 1.0.3
[ 15.216639] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[ 15.234156] md: raid0 personality registered for level 0
[ 15.235548] md: raid1 personality registered for level 1
[ 15.362997] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 15.382999] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 15.403000] raid6: sse2x1 gen() 8666 MB/s
[ 15.423003] usb 3-4: new high-speed USB device number 2 using xhci_hcd
[ 15.513338] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 15.513340] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 15.513502] hub 1-1:1.0: USB hub found
[ 15.513602] hub 1-1:1.0: 6 ports detected
[ 15.533339] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 15.533341] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 15.533496] hub 2-1:1.0: USB hub found
[ 15.533591] hub 2-1:1.0: 8 ports detected
[ 15.573006] raid6: sse2x1 xor() 6307 MB/s
[ 15.574214] usb 3-4: New USB device found, idVendor=05c6, idProduct=9205
[ 15.574216] usb 3-4: New USB device strings: Mfr=4, Product=3, SerialNumber=0
[ 15.574217] usb 3-4: Product: Qualcomm Gobi 2000
[ 15.574219] usb 3-4: Manufacturer: Qualcomm Incorporated
[ 15.743016] raid6: sse2x2 gen() 11007 MB/s
[ 15.793019] usb 1-1.5: new full-speed USB device number 3 using ehci-pci
[ 15.905002] usb 1-1.5: New USB device found, idVendor=8087, idProduct=07dc
[ 15.905004] usb 1-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 15.913024] raid6: sse2x2 xor() 7708 MB/s
[ 16.083030] raid6: sse2x4 gen() 12767 MB/s
[ 16.253032] raid6: sse2x4 xor() 9329 MB/s
[ 16.253034] raid6: using algorithm sse2x4 gen() 12767 MB/s
[ 16.253034] raid6: .... xor() 9329 MB/s, rmw enabled
[ 16.253035] raid6: using ssse3x2 recovery algorithm
[ 16.253258] async_tx: api initialized (async)
[ 16.253396] xor: automatically using best checksumming function:
[ 16.353036] avx : 24161.600 MB/sec
[ 16.353939] md: raid6 personality registered for level 6
[ 16.353941] md: raid5 personality registered for level 5
[ 16.353942] md: raid4 personality registered for level 4
[ 16.362449] md: raid10 personality registered for level 10
[ 16.363658] md: linear personality registered for level -1
[ 16.364779] md: multipath personality registered for level -4
[ 16.384461] JFS: nTxBlock = 8192, nTxLock = 65536
[ 16.389655] RPC: Registered named UNIX socket transport module.
[ 16.389656] RPC: Registered udp transport module.
[ 16.389657] RPC: Registered tcp transport module.
[ 16.389657] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 16.400906] fuse init (API version 7.23)
[ 16.407192] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 16.407194] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 16.411973] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
[ 16.414530] sky2: driver version 1.30
[ 16.416570] pps_core: LinuxPPS API ver. 1 registered
[ 16.416571] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 16.416822] PTP clock support registered
[ 16.426421] Loading iSCSI transport class v2.0-870.
[ 16.469533] device-mapper: multipath: version 1.10.0 loaded
[ 16.478629] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 16.520320] random: lvm urandom read with 18 bits of entropy available
[ 33.309665] UDF-fs: warning (device sda1): udf_fill_super: No partition found (2)
[ 33.311339] (mount,5004,1):ocfs2_fill_super:1028 ERROR: superblock probe failed!
[ 33.311343] (mount,5004,1):ocfs2_fill_super:1219 ERROR: status = -22
[ 33.311518] gfs2: gfs2 mount does not exist
[ 33.313872] EXT4-fs (sda2): couldn't mount as ext3 due to feature incompatibilities
[ 33.439686] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 39.896050] random: nonblocking pool is initialized
[ 41.320391] PM: Starting manual resume from disk
[ 41.950006] EXT4-fs (dm-7): couldn't mount as ext3 due to feature incompatibilities
[ 41.952860] EXT4-fs (dm-7): mounted filesystem with ordered data mode. Opts: (null)
[ 42.310074] EXT4-fs (dm-3): INFO: recovery required on readonly filesystem
[ 42.310077] EXT4-fs (dm-3): write access will be enabled during recovery
[ 42.316022] EXT4-fs (dm-3): recovery complete
[ 42.319536] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: discard
[ 42.897828] ppdev: user-space parallel port driver
[ 42.926947] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 42.926948] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 42.927036] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 42.964366] sdhci: Secure Digital Host Controller Interface driver
[ 42.964368] sdhci: Copyright(c) Pierre Ossman
[ 42.969062] rtc_cmos 00:03: RTC can wake from S4
[ 42.969675] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 42.969707] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[ 42.969729] Non-volatile memory driver v1.3
[ 42.970060] sdhci-pci 0000:01:00.0: SDHCI controller found [1180:e823] (rev 4)
[ 42.970136] sdhci-pci 0000:01:00.0: No vmmc regulator found
[ 42.970137] sdhci-pci 0000:01:00.0: No vqmmc regulator found
[ 42.971380] mmc0: SDHCI controller on PCI [0000:01:00.0] using DMA
[ 42.974845] thinkpad_acpi: tpacpi_acpi_handle_locate: trying to locate ACPI handle for ec, using HID PNP0C09
[ 42.974912] thinkpad_acpi: tpacpi_acpi_handle_locate: Found ACPI handle for ec
[ 42.974913] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[ 42.974913] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 42.974914] thinkpad_acpi: ThinkPad BIOS CBET4000 4.3-366-gab8f923, EC G2HT31WW-3.22
[ 42.974916] thinkpad_acpi: Lenovo ThinkPad X230, model 2325NR8
[ 42.974917] thinkpad_acpi: drv_acpi_handle_init: trying to locate ACPI handle for ecrd
[ 42.974919] thinkpad_acpi: drv_acpi_handle_init: ACPI handle for ecrd not found
[ 42.974920] thinkpad_acpi: drv_acpi_handle_init: trying to locate ACPI handle for ecwr
[ 42.974921] thinkpad_acpi: drv_acpi_handle_init: ACPI handle for ecwr not found
[ 42.975319] thinkpad_acpi: tpacpi_detect_brightness_capabilities: detecting firmware brightness interface capabilities
[ 42.975320] thinkpad_acpi: tpacpi_acpi_handle_locate: trying to locate ACPI handle for video, using HID NULL
[ 42.975331] thinkpad_acpi: tpacpi_acpi_handle_locate: Found ACPI handle for video
[ 42.975365] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[ 42.975366] thinkpad_acpi: ibm_init: probing for driver
[ 42.975367] thinkpad_acpi: ibm_init: driver installed
[ 42.975369] thinkpad_acpi: ibm_init: probing for hotkey
[ 42.975370] thinkpad_acpi: hotkey_init: initializing hotkey subdriver
[ 42.975371] thinkpad_acpi: drv_acpi_handle_init: trying to locate ACPI handle for hkey
[ 42.975375] thinkpad_acpi: drv_acpi_handle_init: Found ACPI handle HKEY for hkey
[ 42.975376] thinkpad_acpi: hotkey_init: hotkeys are supported
[ 42.975389] thinkpad_acpi: hotkey_init: firmware HKEY interface version: 0x100
[ 42.975394] thinkpad_acpi: hotkey_init: hotkey masks are supported
[ 42.975409] thinkpad_acpi: hotkey_init: using keymap number 1
[ 42.975411] thinkpad_acpi: hotkey_init: hotkey source mask 0x00000000, polling freq 10
[ 42.975412] thinkpad_acpi: hotkey_init: enabling firmware HKEY event interface...
[ 42.976072] thinkpad_acpi: hotkey_init: initial masks: user=0x078dffff, fw=0x078dffff, poll=0x00000000
[ 42.976075] thinkpad_acpi: register_tpacpi_subdriver: registering hotkey as an ACPI driver
[ 42.976111] thinkpad_acpi: setup_acpi_notify: setting up ACPI notify for hotkey
[ 42.976113] thinkpad_acpi: ibm_init: hotkey installed
[ 42.976115] thinkpad_acpi: ibm_init: probing for bluetooth
[ 42.976116] thinkpad_acpi: bluetooth_init: initializing bluetooth subdriver
[ 42.976117] thinkpad_acpi: drv_acpi_handle_init: trying to locate ACPI handle for hkey
[ 42.976121] thinkpad_acpi: drv_acpi_handle_init: Found ACPI handle HKEY for hkey
[ 42.976123] thinkpad_acpi: bluetooth_init: bluetooth is not supported, status 0x00
[ 42.976124] thinkpad_acpi: ibm_init: probing for wan
[ 42.976125] thinkpad_acpi: wan_init: initializing wan subdriver
[ 42.976126] thinkpad_acpi: drv_acpi_handle_init: trying to locate ACPI handle for hkey
[ 42.976128] thinkpad_acpi: drv_acpi_handle_init: Found ACPI handle HKEY for hkey
[ 42.976129] thinkpad_acpi: wan_init: wan is not supported, status 0x00
[ 42.976130] thinkpad_acpi: ibm_init: probing for video
[ 42.976131] thinkpad_acpi: video_init: initializing video subdriver
[ 42.976132] thinkpad_acpi: drv_acpi_handle_init: trying to locate ACPI handle for vid
[ 42.976137] thinkpad_acpi: drv_acpi_handle_init: ACPI handle for vid not found
[ 42.976138] thinkpad_acpi: video_init: video is not supported, mode 0
[ 42.976138] thinkpad_acpi: ibm_init: probing for light
[ 42.976139] thinkpad_acpi: light_init: initializing light subdriver
[ 42.976140] thinkpad_acpi: drv_acpi_handle_init: trying to locate ACPI handle for cmos
[ 42.976148] thinkpad_acpi: drv_acpi_handle_init: ACPI handle for cmos not found
[ 42.976149] thinkpad_acpi: light_init: light is not supported, light status is not supported
[ 42.976149] thinkpad_acpi: ibm_init: probing for cmos
[ 42.976150] thinkpad_acpi: cmos_init: initializing cmos commands subdriver
[ 42.976151] thinkpad_acpi: drv_acpi_handle_init: trying to locate ACPI handle for cmos
[ 42.976154] thinkpad_acpi: drv_acpi_handle_init: ACPI handle for cmos not found
[ 42.976154] thinkpad_acpi: cmos_init: cmos commands are not supported
[ 42.976157] thinkpad_acpi: ibm_init: probing for led
[ 42.976158] thinkpad_acpi: led_init: initializing LED subdriver
[ 42.976160] thinkpad_acpi: led_init: LED commands are supported, mode 3
[ 42.976226] thinkpad_acpi: ibm_init: led installed
[ 42.976228] thinkpad_acpi: ibm_init: probing for beep
[ 42.976229] thinkpad_acpi: beep_init: initializing beep subdriver
[ 42.976229] thinkpad_acpi: drv_acpi_handle_init: trying to locate ACPI handle for beep
[ 42.976232] thinkpad_acpi: drv_acpi_handle_init: Found ACPI handle BEEP for beep
[ 42.976233] thinkpad_acpi: beep_init: beep is supported
[ 42.976233] thinkpad_acpi: ibm_init: beep installed
[ 42.976235] thinkpad_acpi: ibm_init: probing for thermal
[ 42.976236] thinkpad_acpi: thermal_init: initializing thermal subdriver
[ 42.976980] Intel(R) Wireless WiFi driver for Linux
[ 42.976982] Copyright(c) 2003- 2015 Intel Corporation
[ 42.979039] thinkpad_acpi: thermal_init: thermal is supported, mode 3
[ 42.979052] thinkpad_acpi: ibm_init: thermal installed
[ 42.979056] thinkpad_acpi: ibm_init: probing for brightness
[ 42.979057] thinkpad_acpi: brightness_init: initializing brightness subdriver
[ 42.979095] thinkpad_acpi: brightness_init: brightness is supported
[ 42.979099] thinkpad_acpi: brightness_init: brightness: registering brightness hotkeys as change notification
[ 42.979805] thinkpad_acpi: ibm_init: brightness installed
[ 42.979807] thinkpad_acpi: ibm_init: probing for volume
[ 42.979808] thinkpad_acpi: volume_init: initializing volume subdriver
[ 42.979810] thinkpad_acpi: volume_init: driver auto-selected volume_mode=3
[ 42.979811] thinkpad_acpi: volume_init: mute is supported, volume control is not supported
[ 42.990310] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7260-17.ucode failed with error -2
[ 43.000512] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 43.000514] thinkpad_acpi: volume_init: registering volume hotkeys as change notification
[ 43.001220] thinkpad_acpi: ibm_init: volume installed
[ 43.001223] thinkpad_acpi: ibm_init: probing for fan
[ 43.001224] thinkpad_acpi: fan_init: initializing fan subdriver
[ 43.001610] thinkpad_acpi: fan_init: fan is supported, modes 2, 2
[ 43.001612] thinkpad_acpi: fan_init: fan control features disabled by parameter
[ 43.001685] thinkpad_acpi: ibm_init: fan installed
[ 43.001688] thinkpad_acpi: ibm_init: probing for mute_led
[ 43.001691] thinkpad_acpi: ibm_init: mute_led installed
[ 43.001774] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input9
[ 43.002287] iwlwifi 0000:02:00.0: loaded firmware version 16.242414.0 op_mode iwlmvm
[ 43.012110] Bluetooth: Core ver 2.21
[ 43.012122] NET: Registered protocol family 31
[ 43.012123] Bluetooth: HCI device and connection manager initialized
[ 43.012127] Bluetooth: HCI socket layer initialized
[ 43.012129] Bluetooth: L2CAP socket layer initialized
[ 43.012134] Bluetooth: SCO socket layer initialized
[ 43.039846] input: PC Speaker as /devices/platform/pcspkr/input/input10
[ 43.043847] usbcore: registered new interface driver btusb
[ 43.064759] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144
[ 43.064836] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
[ 43.065094] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
[ 43.067933] Bluetooth: hci0: read Intel version: 3707100180012d0d00
[ 43.071679] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.1.2d.d.bseq
[ 43.119564] usbcore: registered new interface driver usbserial
[ 43.119577] usbcore: registered new interface driver usbserial_generic
[ 43.119589] usbserial: USB Serial support registered for generic
[ 43.122126] usbcore: registered new interface driver cdc_wdm
[ 43.123379] usbcore: registered new interface driver qcserial
[ 43.123393] usbserial: USB Serial support registered for Qualcomm USB modem
[ 43.124484] qcserial 3-4:1.1: Qualcomm USB modem converter detected
[ 43.124588] usb 3-4: Qualcomm USB modem converter now attached to ttyUSB0
[ 43.125546] qcserial 3-4:1.2: Qualcomm USB modem converter detected
[ 43.125627] usb 3-4: Qualcomm USB modem converter now attached to ttyUSB1
[ 43.127153] qcserial 3-4:1.3: Qualcomm USB modem converter detected
[ 43.127362] usb 3-4: Qualcomm USB modem converter now attached to ttyUSB2
[ 43.130327] qmi_wwan 3-4:1.0: cdc-wdm0: USB WDM device
[ 43.130460] qmi_wwan 3-4:1.0 wwan0: register 'qmi_wwan' at usb-0000:00:14.0-4, WWAN/QMI device, fa:a0:25:24:bb:f1
[ 43.130497] usbcore: registered new interface driver qmi_wwan
[ 43.228955] e1000e 0000:00:19.0 eth0: registered PHC clock
[ 43.228959] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 3c:97:0e:77:a2:3b
[ 43.228961] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 43.229006] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
[ 43.229334] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 43.243246] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[ 43.256621] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 43.256624] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 43.256626] snd_hda_codec_realtek hdaudioC0D0: hp_outs=2 (0x15/0x1b/0x0/0x0/0x0)
[ 43.256627] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 43.256629] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 43.256631] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 43.256633] snd_hda_codec_realtek hdaudioC0D0: Dock Mic=0x19
[ 43.256634] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 43.263944] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[ 43.281631] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 43.281705] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 43.281771] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 43.281836] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 43.281897] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 43.281960] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 43.282025] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 43.284719] cfg80211: World regulatory domain updated:
[ 43.284721] cfg80211: DFS Master region: unset
[ 43.284722] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 43.284724] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 43.284726] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 43.284727] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 43.284728] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 43.284730] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 43.284731] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 43.284733] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 43.284734] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 43.314314] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 43.316554] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
[ 44.388033] EXT4-fs (dm-7): re-mounted. Opts: discard
[ 44.407536] EXT4-fs (dm-3): re-mounted. Opts: discard
[ 44.493237] Adding 16777212k swap on /dev/mapper/foonovo-swap. Priority:-1 extents:1 across:16777212k SS
[ 44.537277] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: discard
[ 44.550355] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: discard
[ 44.563981] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: discard
[ 44.577390] EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: discard
[ 44.593645] EXT4-fs (dm-8): mounted filesystem with ordered data mode. Opts: discard
[ 47.202988] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
[ 47.203293] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
[ 47.408409] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
[ 47.408678] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
[ 47.948614] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 47.948616] Bluetooth: BNEP filters: protocol multicast
[ 47.948619] Bluetooth: BNEP socket layer initialized
[ 48.036418] NET: Registered protocol family 10
[ 48.036624] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 48.036644] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 48.887243] Bluetooth: RFCOMM TTY layer initialized
[ 48.887249] Bluetooth: RFCOMM socket layer initialized
[ 48.887254] Bluetooth: RFCOMM ver 1.11
[ 50.923100] wlp2s0: authenticate with 4c:09:d4:30:40:27
[ 50.926098] wlp2s0: send auth to 4c:09:d4:30:40:27 (try 1/3)
[ 50.932674] wlp2s0: authenticated
[ 50.934685] wlp2s0: associate with 4c:09:d4:30:40:27 (try 1/3)
[ 50.937386] wlp2s0: RX AssocResp from 4c:09:d4:30:40:27 (capab=0x1011 status=0 aid=1)
[ 50.940809] wlp2s0: associated
[ 50.940852] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 50.943271] cfg80211: Regulatory domain changed to country: DE
[ 50.943273] cfg80211: DFS Master region: unset
[ 50.943274] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 50.943277] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 50.943279] cfg80211: (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 50.943280] cfg80211: (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 50.943282] cfg80211: (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2698 mBm), (0 s)
[ 50.943283] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[ 50.990612] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 4c:09:d4:30:40:27