| [ 0.000000] Initializing cgroup subsys cpuset |
| [ 0.000000] Initializing cgroup subsys cpu |
| [ 0.000000] Initializing cgroup subsys cpuacct |
| [ 0.000000] Linux version 3.13-1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.2 (Debian 4.8.2-14) ) #1 SMP Debian 3.13.4-1 (2014-02-22) |
| [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13-1-amd64 root=UUID=7278a628-211f-452e-a4ce-959ca7e8b94a ro quiet |
| [ 0.000000] e820: BIOS-provided physical RAM map: |
| [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16 |
| [ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable |
| [ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable |
| [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable |
| [ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000acecffff] usable |
| [ 0.000000] BIOS-e820: [mem 0x00000000aced0000-0x00000000acffffff] type 16 |
| [ 0.000000] BIOS-e820: [mem 0x00000000ad000000-0x00000000af9fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000044e5fffff] usable |
| [ 0.000000] NX (Execute Disable) protection: active |
| [ 0.000000] SMBIOS 2.7 present. |
| [ 0.000000] DMI: LENOVO 2325TLU, BIOS 4.0-5575-g4a082c6 02/27/2014 |
| [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable |
| [ 0.000000] No AGP bridge found |
| [ 0.000000] e820: last_pfn = 0x44e600 max_arch_pfn = 0x400000000 |
| [ 0.000000] MTRR default type: write-back |
| [ 0.000000] MTRR fixed ranges enabled: |
| [ 0.000000] 00000-9FFFF write-back |
| [ 0.000000] A0000-BFFFF uncachable |
| [ 0.000000] C0000-FFFFF write-back |
| [ 0.000000] MTRR variable ranges enabled: |
| [ 0.000000] 0 base 0AD000000 mask FFF000000 uncachable |
| [ 0.000000] 1 base 0AE000000 mask FFE000000 uncachable |
| [ 0.000000] 2 base 0B0000000 mask FF0000000 uncachable |
| [ 0.000000] 3 base 0C0000000 mask FF0000000 uncachable |
| [ 0.000000] 4 base 0D0000000 mask FF0000000 write-combining |
| [ 0.000000] 5 base 0E0000000 mask FE0000000 uncachable |
| [ 0.000000] 6 disabled |
| [ 0.000000] 7 disabled |
| [ 0.000000] 8 disabled |
| [ 0.000000] 9 disabled |
| [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 |
| [ 0.000000] e820: last_pfn = 0xaced0 max_arch_pfn = 0x400000000 |
| [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 |
| [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] |
| [ 0.000000] [mem 0x00000000-0x000fffff] page 4k |
| [ 0.000000] BRK [0x01a9b000, 0x01a9bfff] PGTABLE |
| [ 0.000000] BRK [0x01a9c000, 0x01a9cfff] PGTABLE |
| [ 0.000000] BRK [0x01a9d000, 0x01a9dfff] PGTABLE |
| [ 0.000000] init_memory_mapping: [mem 0x44e400000-0x44e5fffff] |
| [ 0.000000] [mem 0x44e400000-0x44e5fffff] page 2M |
| [ 0.000000] BRK [0x01a9e000, 0x01a9efff] PGTABLE |
| [ 0.000000] init_memory_mapping: [mem 0x44c000000-0x44e3fffff] |
| [ 0.000000] [mem 0x44c000000-0x44e3fffff] page 2M |
| [ 0.000000] init_memory_mapping: [mem 0x400000000-0x44bffffff] |
| [ 0.000000] [mem 0x400000000-0x44bffffff] page 2M |
| [ 0.000000] BRK [0x01a9f000, 0x01a9ffff] PGTABLE |
| [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff] |
| [ 0.000000] [mem 0x00100000-0x001fffff] page 4k |
| [ 0.000000] [mem 0x00200000-0x1fffffff] page 2M |
| [ 0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff] |
| [ 0.000000] [mem 0x20200000-0x3fffffff] page 2M |
| [ 0.000000] init_memory_mapping: [mem 0x40200000-0xacecffff] |
| [ 0.000000] [mem 0x40200000-0xacdfffff] page 2M |
| [ 0.000000] [mem 0xace00000-0xacecffff] page 4k |
| [ 0.000000] BRK [0x01aa0000, 0x01aa0fff] PGTABLE |
| [ 0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff] |
| [ 0.000000] [mem 0x100000000-0x3ffffffff] page 2M |
| [ 0.000000] RAMDISK: [mem 0x360a0000-0x37047fff] |
| [ 0.000000] ACPI: RSDP 00000000000f0000 000024 (v02 CORE ) |
| [ 0.000000] ACPI: XSDT 00000000acee16e0 00004C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: FACP 00000000acee4d70 0000F4 (v03 CORE COREBOOT 00000000 CORE 00000001) |
| [ 0.000000] ACPI: DSDT 00000000acee1850 00351A (v02 COREv4 COREBOOT 20110725 INTL 20140114) |
| [ 0.000000] ACPI: FACS 00000000acee1810 000040 |
| [ 0.000000] ACPI: HPET 00000000acee4e70 000038 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: APIC 00000000acee4eb0 00006C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: MCFG 00000000acee4f20 00003C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SSDT 00000000acee5e20 00122C (v02 CORE COREBOOT 0000002A CORE 0000002A) |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] No NUMA configuration found |
| [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000044e5fffff] |
| [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x44e5fffff] |
| [ 0.000000] NODE_DATA [mem 0x44e5ed000-0x44e5f1fff] |
| [ 0.000000] [ffffea0000000000-ffffea000f1fffff] PMD -> [ffff88043dc00000-ffff88044bdfffff] on node 0 |
| [ 0.000000] Zone ranges: |
| [ 0.000000] DMA [mem 0x00001000-0x00ffffff] |
| [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] |
| [ 0.000000] Normal [mem 0x100000000-0x44e5fffff] |
| [ 0.000000] Movable zone start for each node |
| [ 0.000000] Early memory node ranges |
| [ 0.000000] node 0: [mem 0x00001000-0x0009ffff] |
| [ 0.000000] node 0: [mem 0x00100000-0x1fffffff] |
| [ 0.000000] node 0: [mem 0x20200000-0x3fffffff] |
| [ 0.000000] node 0: [mem 0x40200000-0xacecffff] |
| [ 0.000000] node 0: [mem 0x100000000-0x44e5fffff] |
| [ 0.000000] On node 0 totalpages: 4173935 |
| [ 0.000000] DMA zone: 56 pages used for memmap |
| [ 0.000000] DMA zone: 22 pages reserved |
| [ 0.000000] DMA zone: 3999 pages, LIFO batch:0 |
| [ 0.000000] DMA32 zone: 9614 pages used for memmap |
| [ 0.000000] DMA32 zone: 703184 pages, LIFO batch:31 |
| [ 0.000000] Normal zone: 47397 pages used for memmap |
| [ 0.000000] Normal zone: 3466752 pages, LIFO batch:31 |
| [ 0.000000] ACPI: PM-Timer IO Port: 0x508 |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) |
| [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) |
| [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) |
| [ 0.000000] ACPI: IRQ0 used by override. |
| [ 0.000000] ACPI: IRQ2 used by override. |
| [ 0.000000] ACPI: IRQ9 used by override. |
| [ 0.000000] Using ACPI (MADT) for SMP configuration information |
| [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 |
| [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs |
| [ 0.000000] nr_irqs_gsi: 40 |
| [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xaced0000-0xacffffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xad000000-0xaf9fffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xafa00000-0xefffffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xffffffff] |
| [ 0.000000] e820: [mem 0xafa00000-0xefffffff] available for PCI devices |
| [ 0.000000] Booting paravirtualized kernel on bare hardware |
| [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 |
| [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88044e200000 s85824 r8192 d20672 u524288 |
| [ 0.000000] pcpu-alloc: s85824 r8192 d20672 u524288 alloc=1*2097152 |
| [ 0.000000] pcpu-alloc: [0] 0 1 2 3 |
| [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4116846 |
| [ 0.000000] Policy zone: Normal |
| [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13-1-amd64 root=UUID=7278a628-211f-452e-a4ce-959ca7e8b94a ro quiet |
| [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) |
| [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 |
| [ 0.000000] Checking aperture... |
| [ 0.000000] No AGP bridge found |
| [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area |
| [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! |
| [ 0.000000] Memory: 16370480K/16695740K available (4806K kernel code, 693K rwdata, 1620K rodata, 988K init, 952K bss, 325260K reserved) |
| [ 0.000000] Hierarchical RCU implementation. |
| [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. |
| [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4. |
| [ 0.000000] NR_IRQS:33024 nr_irqs:712 16 |
| [ 0.000000] Console: colour VGA+ 80x25 |
| [ 0.000000] console [tty0] enabled |
| [ 0.000000] hpet clockevent registered |
| [ 0.000000] tsc: Fast TSC calibration using PIT |
| [ 0.004000] tsc: Detected 2793.532 MHz processor |
| [ 0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 5587.06 BogoMIPS (lpj=11174128) |
| [ 0.000004] pid_max: default: 32768 minimum: 301 |
| [ 0.000023] Security Framework initialized |
| [ 0.000026] AppArmor: AppArmor disabled by boot time parameter |
| [ 0.000027] Yama: disabled by default; enable with sysctl kernel.yama.* |
| [ 0.000781] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) |
| [ 0.004300] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) |
| [ 0.005888] Mount-cache hash table entries: 256 |
| [ 0.006024] Initializing cgroup subsys memory |
| [ 0.006028] Initializing cgroup subsys devices |
| [ 0.006029] Initializing cgroup subsys freezer |
| [ 0.006030] Initializing cgroup subsys blkio |
| [ 0.006032] Initializing cgroup subsys perf_event |
| [ 0.006051] CPU: Physical Processor ID: 0 |
| [ 0.006052] CPU: Processor Core ID: 0 |
| [ 0.006373] mce: CPU supports 7 MCE banks |
| [ 0.006384] CPU0: Thermal monitoring enabled (TM1) |
| [ 0.006392] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0 |
| [ 0.006392] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 |
| [ 0.006392] tlb_flushall_shift: 2 |
| [ 0.006481] Freeing SMP alternatives memory: 20K (ffffffff819a6000 - ffffffff819ab000) |
| [ 0.007380] ACPI: Core revision 20131115 |
| [ 0.009001] ACPI: All ACPI Tables successfully acquired |
| [ 0.009674] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 |
| [ 0.049405] smpboot: CPU0: Intel(R) Core(TM) i5-3360M CPU @ 2.80GHz (fam: 06, model: 3a, stepping: 09) |
| [ 0.049411] TSC deadline timer enabled |
| [ 0.049418] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver. |
| [ 0.049423] ... version: 3 |
| [ 0.049424] ... bit width: 48 |
| [ 0.049425] ... generic registers: 4 |
| [ 0.049426] ... value mask: 0000ffffffffffff |
| [ 0.049426] ... max period: 0000ffffffffffff |
| [ 0.049427] ... fixed-purpose events: 3 |
| [ 0.049428] ... event mask: 000000070000000f |
| [ 0.049629] x86: Booting SMP configuration: |
| [ 0.063136] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. |
| [ 0.049630] .... node #0, CPUs: #1 #2 #3 |
| [ 0.090218] x86: Booted up 1 node, 4 CPUs |
| [ 0.090220] smpboot: Total of 4 processors activated (22348.25 BogoMIPS) |
| [ 0.093002] devtmpfs: initialized |
| [ 0.095807] NET: Registered protocol family 16 |
| [ 0.095873] cpuidle: using governor ladder |
| [ 0.095875] cpuidle: using governor menu |
| [ 0.095894] ACPI: bus type PCI registered |
| [ 0.095895] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 |
| [ 0.095949] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) |
| [ 0.095951] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 |
| [ 0.099641] PCI: Using configuration type 1 for base access |
| [ 0.100180] bio: create slab <bio-0> at 0 |
| [ 0.100264] ACPI: Added _OSI(Module Device) |
| [ 0.100266] ACPI: Added _OSI(Processor Device) |
| [ 0.100267] ACPI: Added _OSI(3.0 _SCP Extensions) |
| [ 0.100268] ACPI: Added _OSI(Processor Aggregator Device) |
| [ 0.102451] ACPI: Interpreter enabled |
| [ 0.102455] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580) |
| [ 0.102459] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580) |
| [ 0.102468] ACPI: (supports S0 S3 S4 S5) |
| [ 0.102469] ACPI: Using IOAPIC for interrupt routing |
| [ 0.102487] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| [ 0.102559] ACPI: No dock devices found. |
| [ 0.106262] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) |
| [ 0.106267] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] |
| [ 0.106305] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] |
| [ 0.106378] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge |
| [ 0.106496] PCI host bridge to bus 0000:00 |
| [ 0.106498] pci_bus 0000:00: root bus resource [bus 00-ff] |
| [ 0.106500] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] |
| [ 0.106501] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] |
| [ 0.106503] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] |
| [ 0.106504] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff] |
| [ 0.106505] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff] |
| [ 0.106506] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff] |
| [ 0.106508] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff] |
| [ 0.106509] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff] |
| [ 0.106510] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff] |
| [ 0.106512] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff] |
| [ 0.106513] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff] |
| [ 0.106515] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff] |
| [ 0.106516] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff] |
| [ 0.106517] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff] |
| [ 0.106518] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff] |
| [ 0.106520] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff] |
| [ 0.106521] pci_bus 0000:00: root bus resource [mem 0xafa00000-0xfebfffff] |
| [ 0.106522] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff] |
| [ 0.106529] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000 |
| [ 0.106597] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000 |
| [ 0.106606] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe03fffff 64bit] |
| [ 0.106611] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref] |
| [ 0.106615] pci 0000:00:02.0: reg 0x20: [io 0x1800-0x183f] |
| [ 0.106690] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330 |
| [ 0.106712] pci 0000:00:14.0: reg 0x10: [mem 0xe0620000-0xe062ffff 64bit] |
| [ 0.106779] pci 0000:00:14.0: PME# supported from D3hot D3cold |
| [ 0.106810] pci 0000:00:14.0: System wakeup disabled by ACPI |
| [ 0.106840] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000 |
| [ 0.106861] pci 0000:00:16.0: reg 0x10: [mem 0xe0636100-0xe063610f 64bit] |
| [ 0.106934] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold |
| [ 0.106994] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000 |
| [ 0.107011] pci 0000:00:19.0: reg 0x10: [mem 0xe0600000-0xe061ffff] |
| [ 0.107020] pci 0000:00:19.0: reg 0x14: [mem 0xe0634000-0xe0634fff] |
| [ 0.107027] pci 0000:00:19.0: reg 0x18: [io 0x1840-0x185f] |
| [ 0.107086] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold |
| [ 0.107141] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 |
| [ 0.107160] pci 0000:00:1a.0: reg 0x10: [mem 0xe0635800-0xe0635bff] |
| [ 0.107246] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold |
| [ 0.107278] pci 0000:00:1a.0: System wakeup disabled by ACPI |
| [ 0.107307] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300 |
| [ 0.107321] pci 0000:00:1b.0: reg 0x10: [mem 0xe0630000-0xe0633fff 64bit] |
| [ 0.107385] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold |
| [ 0.107416] pci 0000:00:1b.0: System wakeup disabled by ACPI |
| [ 0.107446] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400 |
| [ 0.107568] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold |
| [ 0.107638] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400 |
| [ 0.107764] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold |
| [ 0.107834] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400 |
| [ 0.107951] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold |
| [ 0.108023] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 |
| [ 0.108044] pci 0000:00:1d.0: reg 0x10: [mem 0xe0635c00-0xe0635fff] |
| [ 0.108129] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold |
| [ 0.108161] pci 0000:00:1d.0: System wakeup disabled by ACPI |
| [ 0.108188] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100 |
| [ 0.108338] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601 |
| [ 0.108357] pci 0000:00:1f.2: reg 0x10: [io 0x1880-0x1887] |
| [ 0.108366] pci 0000:00:1f.2: reg 0x14: [io 0x1890-0x1893] |
| [ 0.108374] pci 0000:00:1f.2: reg 0x18: [io 0x1888-0x188f] |
| [ 0.108382] pci 0000:00:1f.2: reg 0x1c: [io 0x1894-0x1897] |
| [ 0.108390] pci 0000:00:1f.2: reg 0x20: [io 0x1860-0x187f] |
| [ 0.108398] pci 0000:00:1f.2: reg 0x24: [mem 0xe0635000-0xe06357ff] |
| [ 0.108446] pci 0000:00:1f.2: PME# supported from D3hot |
| [ 0.108495] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500 |
| [ 0.108510] pci 0000:00:1f.3: reg 0x10: [mem 0xe0636000-0xe06360ff 64bit] |
| [ 0.108529] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f] |
| [ 0.108701] pci 0000:01:00.0: [1180:e823] type 00 class 0x080501 |
| [ 0.108726] pci 0000:01:00.0: MMC controller base frequency changed to 50Mhz. |
| [ 0.108746] pci 0000:01:00.0: proprietary Ricoh MMC controller disabled (via firewire function) |
| [ 0.108747] pci 0000:01:00.0: MMC cards are now supported by standard SDHCI controller |
| [ 0.108787] pci 0000:01:00.0: reg 0x10: [mem 0xe0400000-0xe04000ff] |
| [ 0.109068] pci 0000:01:00.0: supports D1 D2 |
| [ 0.109070] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.109182] pci 0000:01:00.1: [1180:e232] type 00 class 0x088000 |
| [ 0.109217] pci 0000:01:00.1: reg 0x10: [mem 0xe0400100-0xe04001ff] |
| [ 0.109492] pci 0000:01:00.1: supports D1 D2 |
| [ 0.109494] pci 0000:01:00.1: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.116933] pci 0000:00:1c.0: PCI bridge to [bus 01] |
| [ 0.116944] pci 0000:00:1c.0: bridge window [mem 0xe0400000-0xe04fffff] |
| [ 0.117189] pci 0000:02:00.0: [8086:0085] type 00 class 0x028000 |
| [ 0.117354] pci 0000:02:00.0: reg 0x10: [mem 0xe0500000-0xe0501fff 64bit] |
| [ 0.118058] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold |
| [ 0.129039] pci 0000:00:1c.1: PCI bridge to [bus 02] |
| [ 0.129047] pci 0000:00:1c.1: bridge window [mem 0xe0500000-0xe05fffff] |
| [ 0.129132] pci 0000:00:1c.2: PCI bridge to [bus 03] |
| [ 0.129315] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11, disabled. |
| [ 0.129354] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10, disabled. |
| [ 0.129391] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11, disabled. |
| [ 0.129427] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15), disabled. |
| [ 0.129463] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. |
| [ 0.129499] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. |
| [ 0.129536] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. |
| [ 0.129572] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. |
| [ 0.129912] ACPI: \_SB_.PCI0: notify handler is installed |
| [ 0.129936] Found 1 acpi root devices |
| [ 0.129967] ACPI : EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 |
| [ 0.130025] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none |
| [ 0.130028] vgaarb: loaded |
| [ 0.130028] vgaarb: bridge control possible 0000:00:02.0 |
| [ 0.130055] PCI: Using ACPI for IRQ routing |
| [ 0.131525] PCI: pci_cache_line_size set to 64 bytes |
| [ 0.131639] e820: reserve RAM buffer [mem 0xaced0000-0xafffffff] |
| [ 0.131641] e820: reserve RAM buffer [mem 0x44e600000-0x44fffffff] |
| [ 0.131716] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 |
| [ 0.131720] hpet0: 8 comparators, 64-bit 14.318180 MHz counter |
| [ 0.133741] Switched to clocksource hpet |
| [ 0.134936] pnp: PnP ACPI init |
| [ 0.134948] ACPI: bus type PNP registered |
| [ 0.134989] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved |
| [ 0.134991] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved |
| [ 0.134993] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved |
| [ 0.134994] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved |
| [ 0.134996] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved |
| [ 0.134998] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved |
| [ 0.134999] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved |
| [ 0.135001] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved |
| [ 0.135002] system 00:00: [mem 0x20000000-0x201fffff] has been reserved |
| [ 0.135004] system 00:00: [mem 0x40000000-0x401fffff] has been reserved |
| [ 0.135006] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) |
| [ 0.135269] pnp 00:01: [dma 4] |
| [ 0.135288] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) |
| [ 0.135304] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active) |
| [ 0.135371] system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved |
| [ 0.135373] system 00:03: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) |
| [ 0.135397] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) |
| [ 0.135422] system 00:05: [io 0x0500-0x057f] could not be reserved |
| [ 0.135423] system 00:05: [io 0x0480-0x04bf] has been reserved |
| [ 0.135425] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) |
| [ 0.135442] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) |
| [ 0.135468] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) |
| [ 0.135491] pnp 00:08: Plug and Play ACPI device, IDs PNP0f13 (active) |
| [ 0.135500] pnp: PnP ACPI: found 9 devices |
| [ 0.135501] ACPI: bus type PNP unregistered |
| [ 0.141341] pci 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000 |
| [ 0.141343] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 |
| [ 0.141345] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000 |
| [ 0.141349] pci 0000:00:1c.2: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000 |
| [ 0.141350] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 |
| [ 0.141352] pci 0000:00:1c.2: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 |
| [ 0.141356] pci 0000:00:1c.2: BAR 14: assigned [mem 0xafa00000-0xafbfffff] |
| [ 0.141359] pci 0000:00:1c.2: BAR 15: assigned [mem 0xafc00000-0xafdfffff 64bit pref] |
| [ 0.141360] pci 0000:00:1c.2: BAR 13: assigned [io 0x2000-0x2fff] |
| [ 0.141362] pci 0000:00:1c.0: PCI bridge to [bus 01] |
| [ 0.141370] pci 0000:00:1c.0: bridge window [mem 0xe0400000-0xe04fffff] |
| [ 0.141381] pci 0000:00:1c.1: PCI bridge to [bus 02] |
| [ 0.141387] pci 0000:00:1c.1: bridge window [mem 0xe0500000-0xe05fffff] |
| [ 0.141398] pci 0000:00:1c.2: PCI bridge to [bus 03] |
| [ 0.141401] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff] |
| [ 0.141408] pci 0000:00:1c.2: bridge window [mem 0xafa00000-0xafbfffff] |
| [ 0.141412] pci 0000:00:1c.2: bridge window [mem 0xafc00000-0xafdfffff 64bit pref] |
| [ 0.141421] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] |
| [ 0.141422] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] |
| [ 0.141424] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] |
| [ 0.141425] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff] |
| [ 0.141426] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff] |
| [ 0.141427] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff] |
| [ 0.141429] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff] |
| [ 0.141430] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff] |
| [ 0.141431] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff] |
| [ 0.141433] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff] |
| [ 0.141434] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff] |
| [ 0.141435] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff] |
| [ 0.141437] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff] |
| [ 0.141438] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff] |
| [ 0.141439] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff] |
| [ 0.141441] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff] |
| [ 0.141442] pci_bus 0000:00: resource 20 [mem 0xafa00000-0xfebfffff] |
| [ 0.141443] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff] |
| [ 0.141445] pci_bus 0000:01: resource 1 [mem 0xe0400000-0xe04fffff] |
| [ 0.141446] pci_bus 0000:02: resource 1 [mem 0xe0500000-0xe05fffff] |
| [ 0.141448] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff] |
| [ 0.141449] pci_bus 0000:03: resource 1 [mem 0xafa00000-0xafbfffff] |
| [ 0.141450] pci_bus 0000:03: resource 2 [mem 0xafc00000-0xafdfffff 64bit pref] |
| [ 0.141500] NET: Registered protocol family 2 |
| [ 0.141680] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) |
| [ 0.141892] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) |
| [ 0.141994] TCP: Hash tables configured (established 131072 bind 65536) |
| [ 0.142010] TCP: reno registered |
| [ 0.142025] UDP hash table entries: 8192 (order: 6, 262144 bytes) |
| [ 0.142070] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) |
| [ 0.142160] NET: Registered protocol family 1 |
| [ 0.142172] pci 0000:00:02.0: Boot video device |
| [ 0.142230] pci 0000:00:14.0: can't derive routing for PCI INT A |
| [ 0.142232] pci 0000:00:14.0: PCI INT A: no GSI |
| [ 0.142304] pci 0000:00:14.0: can't derive routing for PCI INT A |
| [ 0.142546] PCI: CLS 64 bytes, default 64 |
| [ 0.142582] Unpacking initramfs... |
| [ 0.374305] Freeing initrd memory: 16032K (ffff8800360a0000 - ffff880037048000) |
| [ 0.374310] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) |
| [ 0.374311] software IO TLB [mem 0xa8ed0000-0xaced0000] (64MB) mapped at [ffff8800a8ed0000-ffff8800acecffff] |
| [ 0.374474] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x17 |
| [ 0.374480] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x17 |
| [ 0.374488] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x17 |
| [ 0.374495] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x17 |
| [ 0.374540] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba |
| [ 0.374727] audit: initializing netlink socket (disabled) |
| [ 0.374736] type=2000 audit(1393503707.372:1): initialized |
| [ 0.386086] HugeTLB registered 2 MB page size, pre-allocated 0 pages |
| [ 0.386802] VFS: Disk quotas dquot_6.5.2 |
| [ 0.386820] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) |
| [ 0.386877] msgmni has been set to 32004 |
| [ 0.387116] alg: No test for stdrng (krng) |
| [ 0.387137] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) |
| [ 0.387165] io scheduler noop registered |
| [ 0.387167] io scheduler deadline registered |
| [ 0.387182] io scheduler cfq registered (default) |
| [ 0.387330] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X |
| [ 0.387480] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X |
| [ 0.387558] pcieport 0000:00:1c.2: enabling device (0104 -> 0107) |
| [ 0.387633] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X |
| [ 0.387746] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt |
| [ 0.387748] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt |
| [ 0.387749] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt |
| [ 0.387754] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded |
| [ 0.387774] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt |
| [ 0.387775] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt |
| [ 0.387780] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded |
| [ 0.387800] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt |
| [ 0.387805] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded |
| [ 0.387814] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 |
| [ 0.387848] pciehp 0000:00:1c.2:pcie04: HPC vendor_id 8086 device_id 1e14 ss_vid 8086 ss_did 1e14 |
| [ 0.387875] pciehp 0000:00:1c.2:pcie04: service driver pciehp loaded |
| [ 0.387878] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 |
| [ 0.387900] intel_idle: MWAIT substates: 0x21120 |
| [ 0.387901] intel_idle: v0.4 model 0x3A |
| [ 0.387902] intel_idle: lapic_timer_reliable_states 0xffffffff |
| [ 0.387989] GHES: HEST is not enabled! |
| [ 0.388031] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
| [ 0.388349] Linux agpgart interface v0.103 |
| [ 0.388413] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 |
| [ 0.390761] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| [ 0.390764] serio: i8042 AUX port at 0x60,0x64 irq 12 |
| [ 0.390853] mousedev: PS/2 mouse device common for all mice |
| [ 0.390886] rtc_cmos 00:06: RTC can wake from S4 |
| [ 0.391006] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 |
| [ 0.391032] rtc_cmos 00:06: alarms up to one month, 242 bytes nvram, hpet irqs |
| [ 0.391039] Intel P-state driver initializing. |
| [ 0.391048] Intel pstate controlling: cpu 0 |
| [ 0.391064] Intel pstate controlling: cpu 1 |
| [ 0.391075] Intel pstate controlling: cpu 2 |
| [ 0.391086] Intel pstate controlling: cpu 3 |
| [ 0.391104] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com> |
| [ 0.391105] AMD IOMMUv2 functionality not available on this system |
| [ 0.391191] TCP: cubic registered |
| [ 0.391247] NET: Registered protocol family 10 |
| [ 0.391394] mip6: Mobile IPv6 |
| [ 0.391396] NET: Registered protocol family 17 |
| [ 0.391398] mpls_gso: MPLS GSO support |
| [ 0.391582] registered taskstats version 1 |
| [ 0.392444] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 |
| [ 0.392528] rtc_cmos 00:06: setting system clock to 2014-02-27 12:21:47 UTC (1393503707) |
| [ 0.392551] PM: Hibernation image not present or could not be loaded. |
| [ 0.393003] Freeing unused kernel memory: 988K (ffffffff818af000 - ffffffff819a6000) |
| [ 0.393004] Write protecting the kernel read-only data: 8192k |
| [ 0.395259] Freeing unused kernel memory: 1328K (ffff8800014b4000 - ffff880001600000) |
| [ 0.395976] Freeing unused kernel memory: 428K (ffff880001795000 - ffff880001800000) |
| [ 0.439414] systemd-udevd[70]: starting version 204 |
| [ 0.448067] ACPI: bus type USB registered |
| [ 0.448093] usbcore: registered new interface driver usbfs |
| [ 0.448101] usbcore: registered new interface driver hub |
| [ 0.450367] usbcore: registered new device driver usb |
| [ 0.450713] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| [ 0.450870] ehci-pci: EHCI PCI platform driver |
| [ 0.450981] ehci-pci 0000:00:1a.0: EHCI Host Controller |
| [ 0.450987] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 |
| [ 0.451002] ehci-pci 0000:00:1a.0: debug port 2 |
| [ 0.451047] sdhci: Secure Digital Host Controller Interface driver |
| [ 0.451048] sdhci: Copyright(c) Pierre Ossman |
| [ 0.451204] sdhci-pci 0000:01:00.0: SDHCI controller found [1180:e823] (rev 4) |
| [ 0.451582] mmc0: SDHCI controller on PCI [0000:01:00.0] using DMA |
| [ 0.454909] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported |
| [ 0.454932] ehci-pci 0000:00:1a.0: irq 21, io mem 0xe0635800 |
| [ 0.455100] SCSI subsystem initialized |
| [ 0.455904] pps_core: LinuxPPS API ver. 1 registered |
| [ 0.455906] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> |
| [ 0.455915] libata version 3.00 loaded. |
| [ 0.456072] PTP clock support registered |
| [ 0.456666] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k |
| [ 0.456668] e1000e: Copyright(c) 1999 - 2013 Intel Corporation. |
| [ 0.457192] thermal LNXTHERM:00: registered as thermal_zone0 |
| [ 0.457195] ACPI: Thermal Zone [THM0] (63 C) |
| [ 0.458552] thermal LNXTHERM:01: registered as thermal_zone1 |
| [ 0.458555] ACPI: Thermal Zone [THM1] (27 C) |
| [ 0.466173] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 |
| [ 0.466209] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 |
| [ 0.466211] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 0.466213] usb usb1: Product: EHCI Host Controller |
| [ 0.466215] usb usb1: Manufacturer: Linux 3.13-1-amd64 ehci_hcd |
| [ 0.466216] usb usb1: SerialNumber: 0000:00:1a.0 |
| [ 0.466332] hub 1-0:1.0: USB hub found |
| [ 0.466464] hub 1-0:1.0: 3 ports detected |
| [ 0.466678] ehci-pci 0000:00:1d.0: EHCI Host Controller |
| [ 0.466684] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 |
| [ 0.466697] ehci-pci 0000:00:1d.0: debug port 2 |
| [ 0.470615] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported |
| [ 0.470635] ehci-pci 0000:00:1d.0: irq 19, io mem 0xe0635c00 |
| [ 0.472351] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni) |
| [ 0.475163] alg: No test for crc32 (crc32-pclmul) |
| [ 0.482186] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 |
| [ 0.482256] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 |
| [ 0.482258] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 0.482260] usb usb2: Product: EHCI Host Controller |
| [ 0.482261] usb usb2: Manufacturer: Linux 3.13-1-amd64 ehci_hcd |
| [ 0.482262] usb usb2: SerialNumber: 0000:00:1d.0 |
| [ 0.482352] hub 2-0:1.0: USB hub found |
| [ 0.482362] hub 2-0:1.0: 3 ports detected |
| [ 0.482570] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A |
| [ 0.482572] xhci_hcd 0000:00:14.0: PCI INT A: no GSI |
| [ 0.482597] xhci_hcd 0000:00:14.0: xHCI Host Controller |
| [ 0.482602] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 |
| [ 0.482702] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported |
| [ 0.482725] xhci_hcd 0000:00:14.0: irq 43 for MSI/MSI-X |
| [ 0.482826] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 |
| [ 0.482828] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 0.482829] usb usb3: Product: xHCI Host Controller |
| [ 0.482830] usb usb3: Manufacturer: Linux 3.13-1-amd64 xhci_hcd |
| [ 0.482831] usb usb3: SerialNumber: 0000:00:14.0 |
| [ 0.482922] hub 3-0:1.0: USB hub found |
| [ 0.482935] hub 3-0:1.0: 4 ports detected |
| [ 0.483046] xhci_hcd 0000:00:14.0: xHCI Host Controller |
| [ 0.483049] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 |
| [ 0.483125] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 |
| [ 0.483127] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 0.483128] usb usb4: Product: xHCI Host Controller |
| [ 0.483129] usb usb4: Manufacturer: Linux 3.13-1-amd64 xhci_hcd |
| [ 0.483130] usb usb4: SerialNumber: 0000:00:14.0 |
| [ 0.483206] hub 4-0:1.0: USB hub found |
| [ 0.483218] hub 4-0:1.0: 4 ports detected |
| [ 0.510251] ahci 0000:00:1f.2: version 3.0 |
| [ 0.510359] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X |
| [ 0.510385] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled |
| [ 0.526301] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl SATA mode |
| [ 0.526308] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst |
| [ 0.526677] scsi0 : ahci |
| [ 0.526755] scsi1 : ahci |
| [ 0.526810] scsi2 : ahci |
| [ 0.526860] scsi3 : ahci |
| [ 0.526911] scsi4 : ahci |
| [ 0.526955] scsi5 : ahci |
| [ 0.526977] ata1: SATA max UDMA/133 abar m2048@0xe0635000 port 0xe0635100 irq 44 |
| [ 0.526979] ata2: SATA max UDMA/133 abar m2048@0xe0635000 port 0xe0635180 irq 44 |
| [ 0.526982] ata3: SATA max UDMA/133 abar m2048@0xe0635000 port 0xe0635200 irq 44 |
| [ 0.526983] ata4: DUMMY |
| [ 0.526983] ata5: DUMMY |
| [ 0.526984] ata6: DUMMY |
| [ 0.527070] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode |
| [ 0.527088] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X |
| [ 0.726930] e1000e 0000:00:19.0 eth0: registered PHC clock |
| [ 0.726935] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 3c:97:0e:6a:16:ab |
| [ 0.726938] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection |
| [ 0.726999] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF |
| [ 0.778709] usb 1-1: new high-speed USB device number 2 using ehci-pci |
| [ 0.846743] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [ 0.847160] ata1.00: supports DRM functions and may not be fully accessible |
| [ 0.847401] ata1.00: disabling queued TRIM support |
| [ 0.847406] ata1.00: ATA-9: Crucial_CT960M500SSD1, MU02, max UDMA/133 |
| [ 0.847409] ata1.00: 1875385008 sectors, multi 16: LBA48 NCQ (depth 31/32), AA |
| [ 0.848355] ata1.00: supports DRM functions and may not be fully accessible |
| [ 0.848596] ata1.00: disabling queued TRIM support |
| [ 0.849191] ata1.00: configured for UDMA/133 |
| [ 0.849466] scsi 0:0:0:0: Direct-Access ATA Crucial_CT960M50 MU02 PQ: 0 ANSI: 5 |
| [ 0.911528] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 |
| [ 0.911534] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 0.911900] hub 1-1:1.0: USB hub found |
| [ 0.912077] hub 1-1:1.0: 6 ports detected |
| [ 1.022935] usb 2-1: new high-speed USB device number 2 using ehci-pci |
| [ 1.155534] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 |
| [ 1.155540] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 1.155936] hub 2-1:1.0: USB hub found |
| [ 1.156125] hub 2-1:1.0: 8 ports detected |
| [ 1.167120] ata2: SATA link down (SStatus 0 SControl 300) |
| [ 1.227370] usb 1-1.3: new full-speed USB device number 3 using ehci-pci |
| [ 1.321010] usb 1-1.3: New USB device found, idVendor=147e, idProduct=2020 |
| [ 1.321016] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 1.321019] usb 1-1.3: Product: Biometric Coprocessor |
| [ 1.321022] usb 1-1.3: Manufacturer: Auth |
| [ 1.375384] tsc: Refined TSC clocksource calibration: 2793.653 MHz |
| [ 1.391580] usb 1-1.4: new full-speed USB device number 4 using ehci-pci |
| [ 1.487491] ata3: SATA link down (SStatus 0 SControl 300) |
| [ 1.488148] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=21e6 |
| [ 1.488154] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [ 1.488157] usb 1-1.4: Product: BCM20702A0 |
| [ 1.488160] usb 1-1.4: Manufacturer: Broadcom Corp |
| [ 1.488162] usb 1-1.4: SerialNumber: 2016D8D6A3C7 |
| [ 1.493577] sd 0:0:0:0: [sda] 1875385008 512-byte logical blocks: (960 GB/894 GiB) |
| [ 1.493583] sd 0:0:0:0: [sda] 4096-byte physical blocks |
| [ 1.493768] sd 0:0:0:0: [sda] Write Protect is off |
| [ 1.493776] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 |
| [ 1.493839] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 1.495576] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 |
| [ 1.496559] sd 0:0:0:0: [sda] Attached SCSI disk |
| [ 1.498231] sd 0:0:0:0: Attached scsi generic sg0 type 0 |
| [ 1.559600] usb 1-1.6: new high-speed USB device number 5 using ehci-pci |
| [ 1.564832] device-mapper: uevent: version 1.0.3 |
| [ 1.564897] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com |
| [ 1.639618] raid6: sse2x1 6598 MB/s |
| [ 1.663218] usb 1-1.6: New USB device found, idVendor=5986, idProduct=02d2 |
| [ 1.663221] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 1.663223] usb 1-1.6: Product: Integrated Camera |
| [ 1.663225] usb 1-1.6: Manufacturer: Ricoh Company Ltd. |
| [ 1.707696] raid6: sse2x2 9930 MB/s |
| [ 1.735836] usb 2-1.4: new high-speed USB device number 3 using ehci-pci |
| [ 1.775782] raid6: sse2x4 13698 MB/s |
| [ 1.775783] raid6: using algorithm sse2x4 (13698 MB/s) |
| [ 1.775784] raid6: using ssse3x2 recovery algorithm |
| [ 1.775975] xor: automatically using best checksumming function: |
| [ 1.815830] avx : 26969.000 MB/sec |
| [ 1.817582] bio: create slab <bio-1> at 1 |
| [ 1.817726] Btrfs loaded |
| [ 1.829948] usb 2-1.4: config 1 has an invalid interface number: 1 but max is 0 |
| [ 1.829950] usb 2-1.4: config 1 has no interface number 0 |
| [ 1.831826] usb 2-1.4: New USB device found, idVendor=05c6, idProduct=9204 |
| [ 1.831829] usb 2-1.4: New USB device strings: Mfr=3, Product=2, SerialNumber=0 |
| [ 1.831830] usb 2-1.4: Product: Qualcomm Gobi 2000 |
| [ 1.831831] usb 2-1.4: Manufacturer: Qualcomm Incorporated |
| [ 1.882470] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled |
| [ 1.883867] XFS (sda4): Mounting Filesystem |
| [ 1.908972] XFS (sda4): Ending clean mount |
| [ 2.056417] systemd-udevd[416]: starting version 204 |
| [ 2.133655] mei_me 0000:00:16.0: irq 46 for MSI/MSI-X |
| [ 2.135180] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:23/PNP0C09:00/PNP0C0E:00/input/input2 |
| [ 2.135186] ACPI: Sleep Button [SLPB] |
| [ 2.135236] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:23/PNP0C09:00/PNP0C0D:00/input/input3 |
| [ 2.135350] ACPI: Lid Switch [LID] |
| [ 2.135411] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 |
| [ 2.135415] ACPI: Power Button [PWRF] |
| [ 2.144743] ACPI Warning: 0x0000000000000528-0x000000000000052f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251) |
| [ 2.144749] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 2.144752] ACPI Warning: 0x00000000000004b0-0x00000000000004bf SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251) |
| [ 2.144755] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 2.144756] ACPI Warning: 0x0000000000000480-0x00000000000004af SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251) |
| [ 2.144758] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 2.144760] lpc_ich: Resource conflict(s) found affecting gpio_ich |
| [ 2.144870] cfg80211: Calling CRDA to update world regulatory domain |
| [ 2.149786] [drm] Initialized drm 1.1.0 20060810 |
| [ 2.150098] Intel(R) Wireless WiFi driver for Linux, in-tree: |
| [ 2.150100] Copyright(c) 2003-2013 Intel Corporation |
| [ 2.150501] iwlwifi 0000:02:00.0: irq 47 for MSI/MSI-X |
| [ 2.150957] input: PC Speaker as /devices/platform/pcspkr/input/input5 |
| [ 2.151049] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) |
| [ 2.157242] iwlwifi 0000:02:00.0: firmware: direct-loading firmware iwlwifi-6000g2a-6.ucode |
| [ 2.157410] iwlwifi 0000:02:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm |
| [ 2.163878] Non-volatile memory driver v1.3 |
| [ 2.166815] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled |
| [ 2.166818] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled |
| [ 2.166820] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled |
| [ 2.166822] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0 |
| [ 2.167218] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S |
| [ 2.168462] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt |
| [ 2.176845] udevd[594]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory |
| [ 2.190696] udevd[613]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory |
| [ 2.191481] udevd[616]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory |
| [ 2.192192] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' |
| [ 2.197132] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X |
| [ 2.208219] udevd[655]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory |
| [ 2.210142] udevd[662]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory |
| [ 2.211865] udevd[664]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory |
| [ 2.212566] ACPI: AC Adapter [AC] (on-line) |
| [ 2.212643] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7 |
| [ 2.214504] udevd[671]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory |
| [ 2.215470] udevd[675]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory |
| [ 2.216441] Bluetooth: Core ver 2.17 |
| [ 2.216454] NET: Registered protocol family 31 |
| [ 2.216455] Bluetooth: HCI device and connection manager initialized |
| [ 2.216462] Bluetooth: HCI socket layer initialized |
| [ 2.216464] Bluetooth: L2CAP socket layer initialized |
| [ 2.216467] Bluetooth: SCO socket layer initialized |
| [ 2.216637] media: Linux media interface: v0.10 |
| [ 2.218828] udevd[688]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory |
| [ 2.219036] Linux video capture interface: v2.00 |
| [ 2.219407] usbcore: registered new interface driver btusb |
| [ 2.219949] udevd[694]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory |
| [ 2.220519] udevd[695]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory |
| [ 2.222683] udevd[698]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory |
| [ 2.223176] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:02d2) |
| [ 2.225620] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input8 |
| [ 2.225794] usbcore: registered new interface driver uvcvideo |
| [ 2.225796] USB Video Class driver (1.1.1) |
| [ 2.227968] usbcore: registered new interface driver usbserial |
| [ 2.227980] usbcore: registered new interface driver usbserial_generic |
| [ 2.227989] usbserial: USB Serial support registered for generic |
| [ 2.228855] acpi device:07: registered as cooling_device4 |
| [ 2.229329] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input9 |
| [ 2.229472] udevd[708]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory |
| [ 2.230048] usbcore: registered new interface driver qcserial |
| [ 2.230060] usbserial: USB Serial support registered for Qualcomm USB modem |
| [ 2.230083] qcserial 2-1.4:1.1: Qualcomm USB modem converter detected |
| [ 2.230164] usb 2-1.4: Qualcomm USB modem converter now attached to ttyUSB0 |
| [ 2.236869] ACPI: Battery Slot [BAT0] (battery present) |
| [ 2.236963] ACPI: Battery Slot [BAT1] (battery absent) |
| [ 2.240509] udevd[711]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory |
| [ 2.242491] iTCO_vendor_support: vendor-support=0 |
| [ 2.242908] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10 |
| [ 2.242936] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560) |
| [ 2.243138] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) |
| [ 2.263745] Failed to find thinkpad-acpi symbol tpacpi_led_set |
| [ 2.267671] cfg80211: World regulatory domain updated: |
| [ 2.267674] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) |
| [ 2.267675] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) |
| [ 2.267676] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) |
| [ 2.267678] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) |
| [ 2.267679] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) |
| [ 2.267680] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) |
| [ 2.269645] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16 |
| [ 2.269699] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 |
| [ 2.269739] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 |
| [ 2.269780] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 |
| [ 2.269829] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 |
| [ 2.269871] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 |
| [ 2.269909] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 |
| [ 2.271110] [drm] Memory usable by graphics device = 2048M |
| [ 2.289253] i915 0000:00:02.0: irq 49 for MSI/MSI-X |
| [ 2.289263] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). |
| [ 2.289265] [drm] Driver supports precise vblank timestamp query. |
| [ 2.289335] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem |
| [ 2.320148] random: alsactl urandom read with 90 bits of entropy available |
| [ 2.376614] Switched to clocksource tsc |
| [ 2.412574] [drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5 |
| [ 2.429819] fbcon: inteldrmfb (fb0) is primary device |
| [ 2.602120] random: nonblocking pool is initialized |
| [ 3.010644] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd002a3/0x940300/0x123800, board id: 1611, fw id: 1099905 |
| [ 3.010652] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0 |
| [ 3.050349] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6 |
| [ 3.202375] Console: switching to colour frame buffer device 170x48 |
| [ 3.206759] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device |
| [ 3.206762] i915 0000:00:02.0: registered panic notifier |
| [ 3.206788] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 |
| [ 3.822629] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off |
| [ 5.342429] usb 2-1.4: USB disconnect, device number 3 |
| [ 5.342712] qcserial ttyUSB0: Qualcomm USB modem converter now disconnected from ttyUSB0 |
| [ 5.342741] qcserial 2-1.4:1.1: device disconnected |
| [ 5.348983] udevd[1330]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory |
| [ 5.354021] udevd[1337]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory |
| [ 5.936073] psmouse serio2: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64 |
| [ 6.561946] usb 2-1.4: new high-speed USB device number 4 using ehci-pci |
| [ 6.665132] usb 2-1.4: New USB device found, idVendor=05c6, idProduct=9205 |
| [ 6.665139] usb 2-1.4: New USB device strings: Mfr=4, Product=3, SerialNumber=0 |
| [ 6.665143] usb 2-1.4: Product: Qualcomm Gobi 2000 |
| [ 6.665145] usb 2-1.4: Manufacturer: Qualcomm Incorporated |
| [ 6.669425] qcserial 2-1.4:1.1: Qualcomm USB modem converter detected |
| [ 6.669611] usb 2-1.4: Qualcomm USB modem converter now attached to ttyUSB0 |
| [ 6.670489] qcserial 2-1.4:1.2: Qualcomm USB modem converter detected |
| [ 6.670669] usb 2-1.4: Qualcomm USB modem converter now attached to ttyUSB1 |
| [ 6.671434] qcserial 2-1.4:1.3: Qualcomm USB modem converter detected |
| [ 6.671588] usb 2-1.4: Qualcomm USB modem converter now attached to ttyUSB2 |
| [ 6.686612] udevd[1356]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory |
| [ 6.689891] udevd[1363]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory |
| [ 6.691580] udevd[1371]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory |
| [ 6.698021] usbcore: registered new interface driver cdc_wdm |
| [ 6.701478] qmi_wwan 2-1.4:1.0: cdc-wdm0: USB WDM device |
| [ 6.701610] qmi_wwan 2-1.4:1.0 wwan0: register 'qmi_wwan' at usb-0000:00:1d.0-1.4, WWAN/QMI device, a2:e3:76:90:1a:2b |
| [ 6.701636] usbcore: registered new interface driver qmi_wwan |
| [ 6.702254] udevd[1383]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory |
| [ 7.242280] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 |
| [ 7.444156] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input17 |
| [ 12.565169] bio: create slab <bio-2> at 2 |
| [ 12.634363] bio: create slab <bio-2> at 2 |
| [ 12.690625] loop: module loaded |
| [ 12.697080] fuse init (API version 7.22) |
| [ 12.792377] FAT-fs (sda3): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! |
| [ 12.795337] FAT-fs (sda3): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. |
| [ 12.795874] XFS (dm-0): Mounting Filesystem |
| [ 12.819364] XFS (dm-0): Ending clean mount |
| [ 12.828103] FAT-fs (sda2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! |
| [ 12.828803] FAT-fs (sda2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. |
| [ 13.512370] Bluetooth: RFCOMM TTY layer initialized |
| [ 13.512378] Bluetooth: RFCOMM socket layer initialized |
| [ 13.512382] Bluetooth: RFCOMM ver 1.11 |
| [ 13.516495] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 |
| [ 13.516499] Bluetooth: BNEP filters: protocol multicast |
| [ 13.516506] Bluetooth: BNEP socket layer initialized |
| [ 13.519974] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S |
| [ 13.526903] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0 |
| [ 13.794181] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S |
| [ 13.801065] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0 |
| [ 13.891464] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 14.020079] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X |
| [ 14.123226] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X |
| [ 14.123477] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready |
| [ 14.369052] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input18 |
| [ 14.724257] type=1006 audit(1393503721.809:2): pid=3059 uid=0 old auid=4294967295 new auid=114 old ses=4294967295 new ses=1 res=1 |
| [ 14.739086] systemd-logind[3134]: New seat seat0. |
| [ 14.739514] systemd-logind[3134]: Watching system buttons on /dev/input/event3 (Power Button) |
| [ 14.739557] systemd-logind[3134]: Watching system buttons on /dev/input/event7 (Video Bus) |
| [ 14.739593] systemd-logind[3134]: Watching system buttons on /dev/input/event2 (Lid Switch) |
| [ 14.739631] systemd-logind[3134]: Watching system buttons on /dev/input/event1 (Sleep Button) |
| [ 14.740123] systemd-logind[3134]: New session 1 of user Debian-gdm. |
| [ 14.740188] systemd-logind[3134]: Linked /tmp/.X11-unix/X0 to /run/user/114/X11-display. |
| [ 18.874748] systemd-logind[3134]: New session c1 of user phcoder. |
| [ 18.874832] systemd-logind[3134]: Linked /tmp/.X11-unix/X0 to /run/user/1000/X11-display. |
| [ 21.208161] wlan0: authenticate with 00:24:37:96:06:b0 |
| [ 21.211553] wlan0: send auth to 00:24:37:96:06:b0 (try 1/3) |
| [ 21.213804] wlan0: authenticated |
| [ 21.213896] iwlwifi 0000:02:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP |
| [ 21.213899] iwlwifi 0000:02:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP |
| [ 21.215897] wlan0: associate with 00:24:37:96:06:b0 (try 1/3) |
| [ 21.218740] wlan0: RX AssocResp from 00:24:37:96:06:b0 (capab=0x451 status=0 aid=5) |
| [ 21.220458] wlan0: associated |
| [ 21.220477] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready |