blob: 2edb7db5320d1b3ac589759f6e70d805a377eabf [file] [log] [blame]
[ 0.000000] Linux version 4.6.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 5.4.0 20160609 (Debian 5.4.0-6) ) #1 SMP Debian 4.6.4-1 (2016-07-18)
[ 0.000000] Command line: BOOT_IMAGE=(ahci0,gpt4)/vmlinuz root=/dev/sda4 ro quiet
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16
[ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000bfe9cfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bfe9d000-0x00000000bfffffff] type 16
[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000c29fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023c5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: LENOVO 4294CTO/4294CTO, BIOS CBET4000 4.4-1399-gc6080c6 09/04/2016
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x23c600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-back
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0C0000000 mask FE0000000 uncachable
[ 0.000000] 1 base 0E0000000 mask FF0000000 write-combining
[ 0.000000] 2 base 0F0000000 mask FF0000000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: last_pfn = 0xbfe9d max_arch_pfn = 0x400000000
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] reserving inaccessible SNB gfx pages
[ 0.000000] BRK [0x01d36000, 0x01d36fff] PGTABLE
[ 0.000000] BRK [0x01d37000, 0x01d37fff] PGTABLE
[ 0.000000] BRK [0x01d38000, 0x01d38fff] PGTABLE
[ 0.000000] BRK [0x01d39000, 0x01d39fff] PGTABLE
[ 0.000000] BRK [0x01d3a000, 0x01d3afff] PGTABLE
[ 0.000000] BRK [0x01d3b000, 0x01d3bfff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x35bd1000-0x36ddffff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0000 000024 (v02 CORE )
[ 0.000000] ACPI: XSDT 0x00000000BFEB10E0 00005C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: FACP 0x00000000BFEB48B0 0000F4 (v04 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: DSDT 0x00000000BFEB1280 003627 (v02 COREv4 COREBOOT 20110725 INTL 20160318)
[ 0.000000] ACPI: FACS 0x00000000BFEB1240 000040
[ 0.000000] ACPI: FACS 0x00000000BFEB1240 000040
[ 0.000000] ACPI: SSDT 0x00000000BFEB49B0 001569 (v02 CORE COREBOOT 0000002A CORE 0000002A)
[ 0.000000] ACPI: MCFG 0x00000000BFEB5F20 00003C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: TCPA 0x00000000BFEB5F60 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: APIC 0x00000000BFEB5FA0 00006C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: DMAR 0x00000000BFEB6010 0000A8 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: HPET 0x00000000BFEB60C0 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000023c5fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x23c5f6000-0x23c5fafff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000023c5fffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009ffff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000001fffffff]
[ 0.000000] node 0: [mem 0x0000000020200000-0x000000003fffffff]
[ 0.000000] node 0: [mem 0x0000000040200000-0x00000000bfe9cfff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000023c5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000023c5fffff]
[ 0.000000] On node 0 totalpages: 2080828
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 159 pages reserved
[ 0.000000] DMA zone: 3999 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12203 pages used for memmap
[ 0.000000] DMA32 zone: 780957 pages, LIFO batch:31
[ 0.000000] Normal zone: 20248 pages used for memmap
[ 0.000000] Normal zone: 1295872 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0xc0a00000-0xc29fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x508
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbfe9d000-0xbfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xc29fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc2a00000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfed3ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed8ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfed91fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed92000-0xffffffff]
[ 0.000000] e820: [mem 0xc2a00000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 32 pages/cpu @ffff88023c200000 s93720 r8192 d29160 u524288
[ 0.000000] pcpu-alloc: s93720 r8192 d29160 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2048154
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=(ahci0,gpt4)/vmlinuz root=/dev/sda4 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8092704K/8323312K available (5932K kernel code, 1090K rwdata, 2700K rodata, 1336K init, 824K bss, 230608K reserved, 0K cma-reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:33024 nr_irqs:456 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2494.225 MHz processor
[ 0.000032] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.45 BogoMIPS (lpj=9976900)
[ 0.000035] pid_max: default: 32768 minimum: 301
[ 0.000046] ACPI: Core revision 20160108
[ 0.002987] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.003024] Security Framework initialized
[ 0.003026] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.003034] AppArmor: AppArmor disabled by boot time parameter
[ 0.003538] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.005147] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.005843] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.005853] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.006190] Disabling memory control group subsystem
[ 0.006218] CPU: Physical Processor ID: 0
[ 0.006219] CPU: Processor Core ID: 0
[ 0.006224] mce: CPU supports 7 MCE banks
[ 0.006235] CPU0: Thermal monitoring enabled (TM1)
[ 0.006242] process: using mwait in idle threads
[ 0.006245] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.006246] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.006632] Freeing SMP alternatives memory: 24K (ffffffff81c60000 - ffffffff81c66000)
[ 0.008612] ftrace: allocating 24381 entries in 96 pages
[ 0.019447] smpboot: Max logical packages: 2
[ 0.019451] smpboot: APIC(0) Converting physical 0 to logical package 0
[ 0.019462] DMAR: Host address width 36
[ 0.019464] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.019469] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[ 0.019470] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.019474] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[ 0.019476] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.019477] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.019479] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.019810] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.019813] x2apic enabled
[ 0.019819] Switched APIC routing to cluster x2apic.
[ 0.020276] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.059966] TSC deadline timer enabled
[ 0.059970] smpboot: CPU0: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[ 0.059993] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
[ 0.060014] ... version: 3
[ 0.060015] ... bit width: 48
[ 0.060015] ... generic registers: 4
[ 0.060016] ... value mask: 0000ffffffffffff
[ 0.060017] ... max period: 0000ffffffffffff
[ 0.060018] ... fixed-purpose events: 3
[ 0.060019] ... event mask: 000000070000000f
[ 0.060551] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.060646] x86: Booting SMP configuration:
[ 0.060648] .... node #0, CPUs: #1 #2 #3
[ 0.302127] x86: Booted up 1 node, 4 CPUs
[ 0.302131] smpboot: Total of 4 processors activated (19957.20 BogoMIPS)
[ 0.305472] devtmpfs: initialized
[ 0.305539] x86/mm: Memory block size: 128MB
[ 0.309090] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.309160] pinctrl core: initialized pinctrl subsystem
[ 0.309305] NET: Registered protocol family 16
[ 0.321158] cpuidle: using governor ladder
[ 0.326104] cpuidle: using governor menu
[ 0.326242] ACPI: bus type PCI registered
[ 0.326244] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.326328] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.326330] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.326340] PCI: Using configuration type 1 for base access
[ 0.326361] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.334321] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.334571] ACPI: Added _OSI(Module Device)
[ 0.334573] ACPI: Added _OSI(Processor Device)
[ 0.334574] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.334575] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.334792] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.336680] ACPI : EC: EC started
[ 0.336725] ACPI: Interpreter enabled
[ 0.336740] ACPI: (supports S0 S3 S4 S5)
[ 0.336741] ACPI: Using IOAPIC for interrupt routing
[ 0.336763] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.341069] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.341074] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.341122] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.341131] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.341331] PCI host bridge to bus 0000:00
[ 0.341334] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.341335] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.341337] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.341338] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.341340] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.341341] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.341343] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.341344] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.341346] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.341347] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.341349] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.341350] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.341352] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.341353] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.341355] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.341356] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[ 0.341358] pci_bus 0000:00: root bus resource [mem 0xc2a00000-0xf7ffffff window]
[ 0.341359] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[ 0.341361] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.341369] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[ 0.341457] pci 0000:00:02.0: [8086:0126] type 00 class 0x030000
[ 0.341466] pci 0000:00:02.0: reg 0x10: [mem 0xf1000000-0xf13fffff 64bit]
[ 0.341472] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.341476] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
[ 0.341552] pci 0000:00:04.0: [8086:0103] type 00 class 0x118000
[ 0.341561] pci 0000:00:04.0: reg 0x10: [mem 0xf1620000-0xf1627fff 64bit]
[ 0.341662] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[ 0.341677] pci 0000:00:19.0: reg 0x10: [mem 0xf1600000-0xf161ffff]
[ 0.341686] pci 0000:00:19.0: reg 0x14: [mem 0xf162c000-0xf162cfff]
[ 0.341695] pci 0000:00:19.0: reg 0x18: [io 0x3040-0x305f]
[ 0.341755] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.341826] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 0.341844] pci 0000:00:1a.0: reg 0x10: [mem 0xf162e000-0xf162e3ff]
[ 0.341927] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.341964] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.342009] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 0.342026] pci 0000:00:1b.0: reg 0x10: [mem 0xf1628000-0xf162bfff 64bit]
[ 0.342098] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.342138] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.342184] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 0.342298] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.342386] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[ 0.342511] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.342601] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[ 0.342724] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.342811] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
[ 0.342936] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.343024] pci 0000:00:1c.5: [8086:1c1c] type 01 class 0x060400
[ 0.343136] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.343222] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 0.343241] pci 0000:00:1d.0: reg 0x10: [mem 0xf162f000-0xf162f3ff]
[ 0.343324] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.343359] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.343401] pci 0000:00:1f.0: [8086:1c4f] type 00 class 0x060100
[ 0.343565] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[ 0.343582] pci 0000:00:1f.2: reg 0x10: [io 0x3080-0x3087]
[ 0.343591] pci 0000:00:1f.2: reg 0x14: [io 0x3090-0x3093]
[ 0.343600] pci 0000:00:1f.2: reg 0x18: [io 0x3088-0x308f]
[ 0.343608] pci 0000:00:1f.2: reg 0x1c: [io 0x3094-0x3097]
[ 0.343617] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
[ 0.343626] pci 0000:00:1f.2: reg 0x24: [mem 0xf162d000-0xf162d7ff]
[ 0.343671] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.343740] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 0.343756] pci 0000:00:1f.3: reg 0x10: [mem 0xf1630000-0xf16300ff 64bit]
[ 0.343777] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.343918] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.344138] pci 0000:02:00.0: [8086:088e] type 00 class 0x028000
[ 0.344307] pci 0000:02:00.0: reg 0x10: [mem 0xf1400000-0xf1401fff 64bit]
[ 0.345058] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.353336] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.353345] pci 0000:00:1c.1: bridge window [mem 0xf1400000-0xf14fffff]
[ 0.353435] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 0.353441] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.353446] pci 0000:00:1c.3: bridge window [mem 0xf0800000-0xf0ffffff]
[ 0.353454] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf07fffff 64bit pref]
[ 0.353551] pci 0000:04:00.0: [1180:e823] type 00 class 0x080501
[ 0.353586] pci 0000:04:00.0: MMC controller base frequency changed to 50Mhz.
[ 0.353624] pci 0000:04:00.0: reg 0x10: [mem 0xf1500000-0xf15000ff]
[ 0.353930] pci 0000:04:00.0: supports D1 D2
[ 0.353932] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.361224] pci 0000:00:1c.4: PCI bridge to [bus 04]
[ 0.361239] pci 0000:00:1c.4: bridge window [mem 0xf1500000-0xf15fffff]
[ 0.361343] pci 0000:00:1c.5: PCI bridge to [bus 05]
[ 0.361489] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 12 14 15) *11
[ 0.361538] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.361583] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12 14 15) *11
[ 0.361629] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.361673] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12 14 15) *11
[ 0.361718] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.361763] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12 14 15) *11
[ 0.361808] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.362472] ACPI: Enabled 1 GPEs in block 00 to 3F
[ 0.362523] ACPI : EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[ 0.362610] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.362612] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.362614] vgaarb: loaded
[ 0.362616] vgaarb: bridge control possible 0000:00:02.0
[ 0.362710] PCI: Using ACPI for IRQ routing
[ 0.364170] PCI: pci_cache_line_size set to 64 bytes
[ 0.364285] e820: reserve RAM buffer [mem 0xbfe9d000-0xbfffffff]
[ 0.364286] e820: reserve RAM buffer [mem 0x23c600000-0x23fffffff]
[ 0.364458] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.364463] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.366490] clocksource: Switched to clocksource hpet
[ 0.372335] VFS: Disk quotas dquot_6.6.0
[ 0.372362] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.372503] pnp: PnP ACPI init
[ 0.372595] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.372597] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.372599] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.372600] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.372602] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.372604] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.372606] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.372607] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.372609] system 00:00: [mem 0x20000000-0x201fffff] has been reserved
[ 0.372611] system 00:00: [mem 0x40000000-0x401fffff] has been reserved
[ 0.372615] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.373141] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.373144] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.373184] system 00:02: [io 0x0500-0x057f] could not be reserved
[ 0.373186] system 00:02: [io 0x0480-0x04bf] has been reserved
[ 0.373189] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.373212] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.373246] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.373275] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.373369] pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active)
[ 0.373386] pnp: PnP ACPI: found 7 devices
[ 0.379773] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.379838] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.379856] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.379863] pci 0000:00:1c.1: bridge window [mem 0xf1400000-0xf14fffff]
[ 0.379875] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 0.379878] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.379885] pci 0000:00:1c.3: bridge window [mem 0xf0800000-0xf0ffffff]
[ 0.379890] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf07fffff 64bit pref]
[ 0.379898] pci 0000:00:1c.4: PCI bridge to [bus 04]
[ 0.379905] pci 0000:00:1c.4: bridge window [mem 0xf1500000-0xf15fffff]
[ 0.379917] pci 0000:00:1c.5: PCI bridge to [bus 05]
[ 0.379935] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.379937] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.379938] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.379940] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.379941] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.379943] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.379944] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.379946] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.379947] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.379949] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.379950] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.379951] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[ 0.379953] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[ 0.379954] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[ 0.379956] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[ 0.379957] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
[ 0.379959] pci_bus 0000:00: resource 20 [mem 0xc2a00000-0xf7ffffff window]
[ 0.379960] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff window]
[ 0.379962] pci_bus 0000:02: resource 1 [mem 0xf1400000-0xf14fffff]
[ 0.379964] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.379965] pci_bus 0000:03: resource 1 [mem 0xf0800000-0xf0ffffff]
[ 0.379967] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf07fffff 64bit pref]
[ 0.379969] pci_bus 0000:04: resource 1 [mem 0xf1500000-0xf15fffff]
[ 0.380026] NET: Registered protocol family 2
[ 0.380191] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.380326] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.380453] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.380485] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.380512] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.380600] NET: Registered protocol family 1
[ 0.380618] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.381047] PCI: CLS 64 bytes, default 64
[ 0.381102] Unpacking initramfs...
[ 0.707278] Freeing initrd memory: 18492K (ffff880035bd1000 - ffff880036de0000)
[ 0.707334] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.707336] software IO TLB [mem 0xbbe9d000-0xbfe9d000] (64MB) mapped at [ffff8800bbe9d000-ffff8800bfe9cfff]
[ 0.707389] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 0.707390] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 0.707391] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 0.707392] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ 0.707772] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.707807] audit: initializing netlink subsys (disabled)
[ 0.707823] audit: type=2000 audit(1473621750.708:1): initialized
[ 0.708255] Initialise system trusted keyring
[ 0.708361] workingset: timestamp_bits=37 max_order=21 bucket_order=0
[ 0.708385] zbud: loaded
[ 0.755800] Key type asymmetric registered
[ 0.755804] Asymmetric key parser 'x509' registered
[ 0.755825] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.755859] io scheduler noop registered
[ 0.755862] io scheduler deadline registered
[ 0.755877] io scheduler cfq registered (default)
[ 0.756785] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.756792] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.756820] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[ 0.756822] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.756827] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[ 0.756853] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[ 0.756859] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[ 0.756885] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[ 0.756886] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[ 0.756892] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[ 0.756918] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
[ 0.756923] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
[ 0.756931] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.756945] pciehp 0000:00:1c.3:pcie04: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[ 0.756978] pciehp 0000:00:1c.3:pcie04: service driver pciehp loaded
[ 0.756982] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.757004] intel_idle: MWAIT substates: 0x21120
[ 0.757005] intel_idle: v0.4.1 model 0x2A
[ 0.757156] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.757179] GHES: HEST is not enabled!
[ 0.757241] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.757620] Linux agpgart interface v0.103
[ 0.757671] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 0.757672] AMD IOMMUv2 functionality not available on this system
[ 0.758014] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.762594] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.762599] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.762783] mousedev: PS/2 mouse device common for all mice
[ 0.762825] rtc_cmos 00:03: RTC can wake from S4
[ 0.762980] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.763012] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.763023] Intel P-state driver initializing.
[ 0.767261] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.814706] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.815390] NET: Registered protocol family 10
[ 0.815906] mip6: Mobile IPv6
[ 0.815915] NET: Registered protocol family 17
[ 0.815927] mpls_gso: MPLS GSO support
[ 0.816478] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x29
[ 0.816503] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x29
[ 0.816516] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x29
[ 0.816537] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x29
[ 0.816676] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.817090] registered taskstats version 1
[ 0.817146] Loading compiled-in X.509 certificates
[ 0.820251] alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256))
[ 0.821038] Loaded X.509 cert 'Debian Project: Ben Hutchings: 008a018dca80932630'
[ 0.821102] zswap: loaded using pool lzo/zbud
[ 0.821880] rtc_cmos 00:03: setting system clock to 2016-09-11 19:22:31 UTC (1473621751)
[ 0.822053] PM: Hibernation image not present or could not be loaded.
[ 0.825266] Freeing unused kernel memory: 1336K (ffffffff81b12000 - ffffffff81c60000)
[ 0.825271] Write protecting the kernel read-only data: 10240k
[ 0.825809] Freeing unused kernel memory: 196K (ffff8800015cf000 - ffff880001600000)
[ 0.833464] Freeing unused kernel memory: 1396K (ffff8800018a3000 - ffff880001a00000)
[ 0.849972] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.961744] random: systemd-udevd urandom read with 1 bits of entropy available
[ 1.012357] fjes: module verification failed: signature and/or required key missing - tainting kernel
[ 1.012700] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[ 1.037873] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.037878] ACPI: Thermal Zone [THM0] (64 C)
[ 1.038580] pps_core: LinuxPPS API ver. 1 registered
[ 1.038584] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 1.038958] PTP clock support registered
[ 1.039155] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.039159] ACPI: Thermal Zone [THM1] (27 C)
[ 1.040061] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 1.040064] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.040083] ACPI: bus type USB registered
[ 1.040114] usbcore: registered new interface driver usbfs
[ 1.040128] usbcore: registered new interface driver hub
[ 1.040154] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 1.040157] usbcore: registered new device driver usb
[ 1.040686] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.040886] ehci-pci: EHCI PCI platform driver
[ 1.046075] SCSI subsystem initialized
[ 1.048615] libata version 3.00 loaded.
[ 1.058090] sdhci: Secure Digital Host Controller Interface driver
[ 1.058093] sdhci: Copyright(c) Pierre Ossman
[ 1.058433] sdhci-pci 0000:04:00.0: SDHCI controller found [1180:e823] (rev 4)
[ 1.060546] mmc0: SDHCI controller on PCI [0000:04:00.0] using DMA
[ 1.069477] AVX version of gcm_enc/dec engaged.
[ 1.069481] AES CTR mode by8 optimization enabled
[ 1.294558] e1000e 0000:00:19.0 eth0: registered PHC clock
[ 1.294562] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) f0:de:f1:c9:0a:e5
[ 1.294563] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 1.294613] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
[ 1.294784] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.294794] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.294809] ehci-pci 0000:00:1a.0: debug port 2
[ 1.295940] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[ 1.298710] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.298744] ehci-pci 0000:00:1a.0: irq 21, io mem 0xf162e000
[ 1.310584] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.310636] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.310637] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.310639] usb usb1: Product: EHCI Host Controller
[ 1.310640] usb usb1: Manufacturer: Linux 4.6.0-1-amd64 ehci_hcd
[ 1.310641] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.310790] hub 1-0:1.0: USB hub found
[ 1.310798] hub 1-0:1.0: 3 ports detected
[ 1.311272] ahci 0000:00:1f.2: version 3.0
[ 1.311457] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 1.321605] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl SATA mode
[ 1.321617] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst
[ 1.322245] scsi host0: ahci
[ 1.322339] scsi host1: ahci
[ 1.322428] scsi host2: ahci
[ 1.322511] scsi host3: ahci
[ 1.322610] scsi host4: ahci
[ 1.322690] scsi host5: ahci
[ 1.322733] ata1: SATA max UDMA/133 abar m2048@0xf162d000 port 0xf162d100 irq 32
[ 1.322736] ata2: SATA max UDMA/133 abar m2048@0xf162d000 port 0xf162d180 irq 32
[ 1.322739] ata3: SATA max UDMA/133 abar m2048@0xf162d000 port 0xf162d200 irq 32
[ 1.322740] ata4: DUMMY
[ 1.322740] ata5: DUMMY
[ 1.322741] ata6: DUMMY
[ 1.322872] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.322878] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.322891] ehci-pci 0000:00:1d.0: debug port 2
[ 1.326789] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.326807] ehci-pci 0000:00:1d.0: irq 19, io mem 0xf162f000
[ 1.338548] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.338589] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.338590] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.338592] usb usb2: Product: EHCI Host Controller
[ 1.338593] usb usb2: Manufacturer: Linux 4.6.0-1-amd64 ehci_hcd
[ 1.338594] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.338716] hub 2-0:1.0: USB hub found
[ 1.338721] hub 2-0:1.0: 3 ports detected
[ 1.622658] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.634516] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.636628] ata1.00: supports DRM functions and may not be fully accessible
[ 1.636795] ata1.00: disabling queued TRIM support
[ 1.636802] ata1.00: ATA-9: Samsung SSD 840 EVO 120GB, EXT0DB6Q, max UDMA/133
[ 1.636807] ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 1.637014] ata1.00: supports DRM functions and may not be fully accessible
[ 1.637094] ata1.00: disabling queued TRIM support
[ 1.637102] ata1.00: configured for UDMA/133
[ 1.637557] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 DB6Q PQ: 0 ANSI: 5
[ 1.650626] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.706653] tsc: Refined TSC clocksource calibration: 2494.338 MHz
[ 1.706662] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f454f0625, max_idle_ns: 440795228661 ns
[ 1.755381] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.755392] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.756010] hub 1-1:1.0: USB hub found
[ 1.757309] hub 1-1:1.0: 6 ports detected
[ 1.783467] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.783477] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.783992] hub 2-1:1.0: USB hub found
[ 1.784118] hub 2-1:1.0: 8 ports detected
[ 1.970251] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.030653] usb 1-1.3: new full-speed USB device number 3 using ehci-pci
[ 2.048304] psmouse serio1: synaptics: queried max coordinates: x [..5472], y [..4448]
[ 2.054674] usb 2-1.3: new full-speed USB device number 3 using ehci-pci
[ 2.124702] usb 1-1.3: New USB device found, idVendor=147e, idProduct=2016
[ 2.124711] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.124715] usb 1-1.3: Product: Biometric Coprocessor
[ 2.124718] usb 1-1.3: Manufacturer: UPEK
[ 2.141199] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.0, id: 0x1e2b1, caps: 0xd001a3/0x940300/0x120c00/0x0, board id: 1611, fw id: 774180
[ 2.141224] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[ 2.151750] usb 2-1.3: New USB device found, idVendor=8087, idProduct=07da
[ 2.151760] usb 2-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.194683] usb 1-1.6: new high-speed USB device number 4 using ehci-pci
[ 2.199877] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
[ 2.222683] usb 2-1.4: new high-speed USB device number 4 using ehci-pci
[ 2.282219] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.294201] usb 1-1.6: New USB device found, idVendor=04f2, idProduct=b217
[ 2.294212] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.294218] usb 1-1.6: Product: Integrated Camera
[ 2.294223] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd.
[ 2.302975] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[ 2.303115] sd 0:0:0:0: [sda] Write Protect is off
[ 2.303123] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.303565] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.316533] sda: sda1 sda2 sda3 sda4 sda5
[ 2.317751] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.328903] usb 2-1.4: New USB device found, idVendor=0bdb, idProduct=190d
[ 2.328909] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.328921] usb 2-1.4: Product: F5521gw
[ 2.328923] usb 2-1.4: Manufacturer: Ericsson
[ 2.328925] usb 2-1.4: SerialNumber: 1B6D288CB004B6B0
[ 2.442608] usb 2-1.5: new full-speed USB device number 5 using ehci-pci
[ 2.458589] raid6: sse2x1 gen() 4647 MB/s
[ 2.526600] raid6: sse2x1 xor() 4685 MB/s
[ 2.537106] usb 2-1.5: New USB device found, idVendor=056a, idProduct=00e6
[ 2.537109] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.537111] usb 2-1.5: Product: ISD-V4
[ 2.537112] usb 2-1.5: Manufacturer: Tablet
[ 2.540054] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.551221] usbcore: registered new interface driver usbhid
[ 2.551224] usbhid: USB HID core driver
[ 2.552844] input: Wacom ISDv4 E6 Pen as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/0003:056A:00E6.0001/input/input4
[ 2.552934] wacom 0003:056A:00E6.0001: hidraw0: USB HID v1.11 Device [Tablet ISD-V4] on usb-0000:00:1d.0-1.5/input0
[ 2.553281] input: Wacom ISDv4 E6 Finger as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.1/0003:056A:00E6.0002/input/input8
[ 2.553353] wacom 0003:056A:00E6.0002: hidraw1: USB HID v1.11 Mouse [Tablet ISD-V4] on usb-0000:00:1d.0-1.5/input1
[ 2.594606] raid6: sse2x2 gen() 9445 MB/s
[ 2.662601] raid6: sse2x2 xor() 7599 MB/s
[ 2.730605] raid6: sse2x4 gen() 10618 MB/s
[ 2.798607] raid6: sse2x4 xor() 5295 MB/s
[ 2.798609] raid6: using algorithm sse2x4 gen() 10618 MB/s
[ 2.798610] raid6: .... xor() 5295 MB/s, rmw enabled
[ 2.798611] raid6: using ssse3x2 recovery algorithm
[ 2.798627] clocksource: Switched to clocksource tsc
[ 2.798889] xor: automatically using best checksumming function:
[ 2.838599] avx : 19818.000 MB/sec
[ 2.842106] Btrfs loaded
[ 2.949466] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 3.092963] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 3.359493] systemd[1]: systemd 231 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 3.359686] systemd[1]: Detected architecture x86-64.
[ 3.362015] systemd[1]: Set hostname to <cornaLaptop>.
[ 3.388106] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input3
[ 3.621440] systemd[1]: iodined.service: Cannot add dependency job, ignoring: Unit iodined.service is masked.
[ 3.623410] systemd[1]: Reached target Encrypted Volumes.
[ 3.623641] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 3.623955] systemd[1]: Created slice System Slice.
[ 3.624210] systemd[1]: Created slice system-getty.slice.
[ 3.624503] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 3.624598] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 3.624819] systemd[1]: Created slice User and Session Slice.
[ 3.624847] systemd[1]: Reached target Slices.
[ 3.624944] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 3.625175] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 3.625205] systemd[1]: Reached target User and Group Name Lookups.
[ 3.625267] systemd[1]: Listening on RPCbind Server Activation Socket.
[ 3.625339] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 3.625415] systemd[1]: Listening on udev Control Socket.
[ 3.625485] systemd[1]: Listening on Syslog Socket.
[ 3.625575] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 3.625629] systemd[1]: Listening on LVM2 poll daemon socket.
[ 3.625709] systemd[1]: Listening on Journal Socket.
[ 3.643063] systemd[1]: Starting Load Kernel Modules...
[ 3.644182] systemd[1]: Mounting Debug File System...
[ 3.645409] systemd[1]: Starting Uncomplicated firewall...
[ 3.646860] systemd[1]: Mounting POSIX Message Queue File System...
[ 3.648281] systemd[1]: Mounting RPC Pipe File System...
[ 3.659572] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
[ 3.660471] systemd[1]: Mounting Temporary Directory...
[ 3.661413] systemd[1]: Mounting Huge Pages File System...
[ 3.662689] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 3.662885] systemd[1]: Listening on Journal Socket (/dev/log).
[ 3.663006] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 3.663886] systemd[1]: Starting Set the console keyboard layout...
[ 3.665232] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 3.665734] systemd[1]: Listening on udev Kernel Socket.
[ 3.665974] systemd[1]: Listening on Journal Audit Socket.
[ 3.668802] systemd[1]: Starting Journal Service...
[ 3.670271] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ 3.670323] systemd[1]: Reached target Swap.
[ 3.672832] systemd[1]: Mounted Huge Pages File System.
[ 3.672904] systemd[1]: Mounted Debug File System.
[ 3.672935] systemd[1]: Mounted POSIX Message Queue File System.
[ 3.672970] systemd[1]: Mounted Temporary Directory.
[ 3.681226] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 3.682584] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 3.683985] EXT4-fs (sda4): re-mounted. Opts: discard,errors=remount-ro
[ 3.685586] systemd[1]: Started Remount Root and Kernel File Systems.
[ 3.686748] systemd[1]: Starting Load/Save Random Seed...
[ 3.690220] lp: driver loaded but no devices found
[ 3.694464] ppdev: user-space parallel port driver
[ 3.694494] systemd[1]: Starting udev Coldplug all Devices...
[ 3.717466] systemd[1]: Started Load/Save Random Seed.
[ 3.727584] systemd[1]: Started Load Kernel Modules.
[ 3.729889] RPC: Registered named UNIX socket transport module.
[ 3.729894] RPC: Registered udp transport module.
[ 3.729896] RPC: Registered tcp transport module.
[ 3.729898] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 3.742867] systemd[1]: Starting Apply Kernel Variables...
[ 3.744109] systemd[1]: Mounted RPC Pipe File System.
[ 3.744220] systemd[1]: Started Journal Service.
[ 3.748981] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 3.759051] systemd-journald[1023]: Received request to flush runtime journal from PID 1
[ 3.765365] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[ 3.780962] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 3.928130] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1f/PNP0C09:00/PNP0C0E:00/input/input10
[ 3.928134] ACPI: Sleep Button [SLPB]
[ 3.928179] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1f/PNP0C09:00/PNP0C0D:00/input/input11
[ 3.928295] ACPI: Lid Switch [LID]
[ 3.928354] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input12
[ 3.928357] ACPI: Power Button [PWRF]
[ 3.938305] [drm] Initialized drm 1.1.0 20060810
[ 3.938476] tpm_tis 00:06: 1.2 TPM (device-id 0x0, rev-id 78)
[ 3.941253] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 3.956289] [drm] Memory usable by graphics device = 2048M
[ 3.956294] [drm] Replacing VGA console driver
[ 3.957202] Console: switching to colour dummy device 80x25
[ 3.958969] ACPI: AC Adapter [AC] (off-line)
[ 3.963113] Non-volatile memory driver v1.3
[ 3.966773] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[ 3.966776] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 3.966778] thinkpad_acpi: ThinkPad BIOS CBET4000 4.4-1399-gc6080c6, EC 8DHT34WW-3.20
[ 3.966779] thinkpad_acpi: Lenovo ThinkPad X220 Tablet, model 4294CTO
[ 3.967858] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 3.967861] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 3.979498] ACPI: Battery Slot [BAT0] (battery present)
[ 3.979641] ACPI: Battery Slot [BAT1] (battery absent)
[ 3.985584] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 3.985993] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 3.987228] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input13
[ 3.988302] Intel(R) Wireless WiFi driver for Linux
[ 3.988305] Copyright(c) 2003- 2015 Intel Corporation
[ 3.991787] iwlwifi 0000:02:00.0: firmware: direct-loading firmware iwlwifi-6000g2b-6.ucode
[ 3.991961] iwlwifi 0000:02:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[ 3.998817] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.005844] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 4.005848] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[ 4.005851] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
[ 4.005853] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Advanced-N 6235 AGN, REV=0xB0
[ 4.005912] iwlwifi 0000:02:00.0: L1 Disabled - LTR Disabled
[ 4.014735] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 4.014738] [drm] Driver supports precise vblank timestamp query.
[ 4.015202] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 4.015506] input: PC Speaker as /devices/platform/pcspkr/input/input14
[ 4.065191] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 4.066822] acpi device:03: registered as cooling_device4
[ 4.066899] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input15
[ 4.067314] [drm] Initialized i915 1.6.0 20160229 for 0000:00:02.0 on minor 0
[ 4.068182] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20160108/utaddress-255)
[ 4.068189] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.068194] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20160108/utaddress-255)
[ 4.068198] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.068200] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20160108/utaddress-255)
[ 4.068203] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.068205] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20160108/utaddress-255)
[ 4.068208] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.068209] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 4.068383] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 4.081815] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 4.084132] snd_hda_codec_conexant hdaudioC0D0: CX20590: BIOS auto-probing.
[ 4.084610] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20590: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker
[ 4.084614] snd_hda_codec_conexant hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 4.084616] snd_hda_codec_conexant hdaudioC0D0: hp_outs=2 (0x1c/0x19/0x0/0x0/0x0)
[ 4.084618] snd_hda_codec_conexant hdaudioC0D0: mono: mono_out=0x0
[ 4.084620] snd_hda_codec_conexant hdaudioC0D0: inputs:
[ 4.084623] snd_hda_codec_conexant hdaudioC0D0: Internal Mic=0x23
[ 4.084625] snd_hda_codec_conexant hdaudioC0D0: Mic=0x1b
[ 4.084627] snd_hda_codec_conexant hdaudioC0D0: Dock Mic=0x1a
[ 4.086499] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication
[ 4.094711] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 4.095073] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 4.095146] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[ 4.095240] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
[ 4.095428] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
[ 4.095517] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21
[ 4.095589] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input22
[ 4.095657] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input23
[ 4.133264] intel_rapl: Found RAPL domain package
[ 4.133267] intel_rapl: Found RAPL domain core
[ 4.133269] intel_rapl: Found RAPL domain uncore
[ 4.170809] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 4.184578] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 4.251679] iTCO_vendor_support: vendor-support=0
[ 4.254993] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 4.255041] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0560)
[ 4.255172] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 4.259873] random: nonblocking pool is initialized
[ 4.270678] [drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
[ 4.273043] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
[ 4.329922] snd_hda_codec_conexant hdaudioC0D0: num_steps = 0 for NID=0x13 (ctl = Beep Playback Volume)
[ 4.330277] snd_hda_codec_conexant hdaudioC0D0: num_steps = 0 for NID=0x13 (ctl = Beep Playback Volume)
[ 4.402812] snd_hda_codec_conexant hdaudioC0D0: num_steps = 0 for NID=0x13 (ctl = Beep Playback Volume)
[ 4.402994] snd_hda_codec_conexant hdaudioC0D0: num_steps = 0 for NID=0x13 (ctl = Beep Playback Volume)
[ 4.592001] fbcon: inteldrmfb (fb0) is primary device
[ 4.617533] systemd[1]: apt-daily.timer: Adding 8h 12min 29.971265s random time.
[ 5.543039] media: Linux media interface: v0.10
[ 5.549283] Linux video capture interface: v2.00
[ 5.560915] Bluetooth: Core ver 2.21
[ 5.560934] NET: Registered protocol family 31
[ 5.560935] Bluetooth: HCI device and connection manager initialized
[ 5.560941] Bluetooth: HCI socket layer initialized
[ 5.560944] Bluetooth: L2CAP socket layer initialized
[ 5.560953] Bluetooth: SCO socket layer initialized
[ 5.623564] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b217)
[ 5.624344] usbcore: registered new interface driver btusb
[ 5.626479] uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized!
[ 5.626485] uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized!
[ 5.626488] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized!
[ 5.626688] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input24
[ 5.626874] usbcore: registered new interface driver uvcvideo
[ 5.626876] USB Video Class driver (1.1.1)
[ 5.740294] Console: switching to colour frame buffer device 170x48
[ 5.746257] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 5.799392] systemd[1]: apt-daily.timer: Adding 10h 23min 30.119722s random time.
[ 6.007104] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 6.010333] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 6.263177] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 6.367221] cdc_acm 2-1.4:1.1: ttyACM0: USB ACM device
[ 6.368866] cdc_acm 2-1.4:1.3: ttyACM1: USB ACM device
[ 6.371267] cdc_acm 2-1.4:1.9: ttyACM2: USB ACM device
[ 6.371872] usbcore: registered new interface driver cdc_acm
[ 6.371876] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 6.372513] cdc_wdm 2-1.4:1.5: cdc-wdm0: USB WDM device
[ 6.372605] cdc_wdm 2-1.4:1.8: cdc-wdm1: USB WDM device
[ 6.372642] usbcore: registered new interface driver cdc_wdm
[ 6.394226] cdc_ncm 2-1.4:1.6: MAC-Address: 02:80:37:ec:02:00
[ 6.394605] cdc_ncm 2-1.4:1.6 wwan0: register 'cdc_ncm' at usb-0000:00:1d.0-1.4, Mobile Broadband Network Device, 02:80:37:ec:02:00
[ 6.394650] usbcore: registered new interface driver cdc_ncm
[ 6.397996] usbcore: registered new interface driver cdc_mbim
[ 6.403639] cdc_ncm 2-1.4:1.6 wwp0s29u1u4i6: renamed from wwan0
[ 6.412760] usb 2-1.4: usbfs: interface 1 claimed by cdc_acm while 'usb_modeswitch' sets config #2
[ 6.412770] usb 2-1.4: usbfs: interface 1 claimed by cdc_acm while 'usb_modeswitch' sets config #2
[ 6.412775] usb 2-1.4: usbfs: interface 1 claimed by cdc_acm while 'usb_modeswitch' sets config #2
[ 6.412779] usb 2-1.4: usbfs: interface 1 claimed by cdc_acm while 'usb_modeswitch' sets config #2
[ 6.412783] usb 2-1.4: usbfs: interface 1 claimed by cdc_acm while 'usb_modeswitch' sets config #2
[ 6.575111] Ebtables v2.0 registered
[ 6.844756] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[ 6.852685] tun: Universal TUN/TAP device driver, 1.6
[ 6.852693] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 6.903060] virbr0: port 1(virbr0-nic) entered blocking state
[ 6.903067] virbr0: port 1(virbr0-nic) entered disabled state
[ 6.903221] device virbr0-nic entered promiscuous mode
[ 7.035611] virbr0: port 1(virbr0-nic) entered blocking state
[ 7.035616] virbr0: port 1(virbr0-nic) entered listening state
[ 7.433527] virbr0: port 1(virbr0-nic) entered disabled state
[ 7.441360] device virbr0-nic left promiscuous mode
[ 7.441399] virbr0: port 1(virbr0-nic) entered disabled state
[ 7.578404] systemd[1]: apt-daily.timer: Adding 10h 45min 11.641355s random time.
[ 7.866744] systemd[1]: apt-daily.timer: Adding 26min 17.318934s random time.
[ 7.911096] cdc_wdm 2-1.4:1.8: wdm_int_callback - 0 bytes
[ 7.913116] cdc_wdm 2-1.4:1.5: wdm_int_callback - 0 bytes
[ 12.470177] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[ 12.483489] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[ 14.309659] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 14.309664] Bluetooth: BNEP filters: protocol multicast
[ 14.309668] Bluetooth: BNEP socket layer initialized
[ 14.324979] Bluetooth: RFCOMM TTY layer initialized
[ 14.325000] Bluetooth: RFCOMM socket layer initialized
[ 14.325005] Bluetooth: RFCOMM ver 1.11
[ 21.629030] fuse init (API version 7.24)
[ 68.036413] IPv6: ADDRCONF(NETDEV_UP): wwp0s29u1u4i6: link is not ready
[ 68.044257] cdc_ncm 2-1.4:1.6 wwp0s29u1u4i6: network connection: disconnected
[ 68.052254] cdc_ncm 2-1.4:1.6 wwp0s29u1u4i6: network connection: disconnected
[ 68.068259] cdc_ncm 2-1.4:1.6 wwp0s29u1u4i6: 21 mbit/s downlink 5 mbit/s uplink
[ 68.076264] cdc_ncm 2-1.4:1.6 wwp0s29u1u4i6: network connection: connected