blob: 9d023fb8673fe3884b01fe960b639ebdb9e2da39 [file] [log] [blame]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.51-1
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=7d581789-2cdd-423e-9a8b-b89626891401 ro quiet
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000b76d0000 (usable)
[ 0.000000] BIOS-e820: 00000000b76d0000 - 00000000b8000000 (reserved)
[ 0.000000] BIOS-e820: 00000000b9c00000 - 00000000bc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000d0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fee00000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: LENOVO 3626EN1, BIOS 4.0-5405-gdec9198 02/01/2014
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0xb76d0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-back
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0B7800000 mask FFF800000 uncachable
[ 0.000000] 1 base 0B8000000 mask FF8000000 uncachable
[ 0.000000] 2 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [ffff8800000fde70] fde70
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000b76d0000
[ 0.000000] 0000000000 - 00b7600000 page 2M
[ 0.000000] 00b7600000 - 00b76d0000 page 4k
[ 0.000000] kernel direct mapping tables up to b76d0000 @ 1fffb000-20000000
[ 0.000000] RAMDISK: 36bfa000 - 375f5000
[ 0.000000] ACPI: RSDP 00000000000fde40 00024 (v02 CORE )
[ 0.000000] ACPI: XSDT 00000000b76e2ee0 0004C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: HPET 00000000b76e3010 00038 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: APIC 00000000b76e3050 00084 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: MCFG 00000000b76e30e0 0003C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: FACP 00000000b76e6d60 000F4 (v03 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: DSDT 00000000b76e3160 03AF1 (v03 COREv4 COREBOOT 20130325 INTL 20140114)
[ 0.000000] ACPI: FACS 00000000b76e3120 00040
[ 0.000000] ACPI: SSDT 00000000b76e6e60 00C34 (v02 CORE COREBOOT 0000002A CORE 0000002A)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-00000000b76d0000
[ 0.000000] Initmem setup node 0 0000000000000000-00000000b76d0000
[ 0.000000] NODE_DATA [00000000b76cb000 - 00000000b76cffff]
[ 0.000000] [ffffea0000000000-ffffea00029fffff] PMD -> [ffff8800b4000000-ffff8800b69fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000b76d0
[ 0.000000] On node 0 totalpages: 751199
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3922 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 10216 pages used for memmap
[ 0.000000] DMA32 zone: 737000 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x508
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at bc000000 (gap: bc000000:14000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff8800b7400000 s82944 r8192 d23552 u524288
[ 0.000000] pcpu-alloc: s82944 r8192 d23552 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 740922
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=7d581789-2cdd-423e-9a8b-b89626891401 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 2942592k/3005248k available (3426k kernel code, 452k absent, 62204k reserved, 3312k data, 576k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:712 16
[ 0.000000] Extended CMOS year: 300
[ 0.000000] WARNING: Persistent clock returned invalid value!
[ 0.000000] Check your CMOS/BIOS settings.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.004000] Detected 2128.029 MHz processor.
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4256.05 BogoMIPS (lpj=8512116)
[ 0.000007] pid_max: default: 32768 minimum: 301
[ 0.000047] Security Framework initialized
[ 0.000052] AppArmor: AppArmor disabled by boot time parameter
[ 0.000315] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.001960] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.002714] Mount-cache hash table entries: 256
[ 0.002843] Initializing cgroup subsys cpuacct
[ 0.002848] Initializing cgroup subsys memory
[ 0.002860] Initializing cgroup subsys devices
[ 0.002864] Initializing cgroup subsys freezer
[ 0.002866] Initializing cgroup subsys net_cls
[ 0.002868] Initializing cgroup subsys blkio
[ 0.002874] Initializing cgroup subsys perf_event
[ 0.002904] CPU: Physical Processor ID: 0
[ 0.002905] CPU: Processor Core ID: 0
[ 0.002911] mce: CPU supports 9 MCE banks
[ 0.002924] CPU0: Thermal monitoring enabled (TM1)
[ 0.002932] using mwait in idle threads.
[ 0.003365] ACPI: Core revision 20110623
[ 0.006955] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.046623] CPU0: Intel(R) Core(TM) i7 CPU L 640 @ 2.13GHz stepping 02
[ 0.151668] Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver.
[ 0.151676] ... version: 3
[ 0.151678] ... bit width: 48
[ 0.151679] ... generic registers: 4
[ 0.151680] ... value mask: 0000ffffffffffff
[ 0.151682] ... max period: 000000007fffffff
[ 0.151683] ... fixed-purpose events: 3
[ 0.151685] ... event mask: 000000070000000f
[ 0.151890] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.152015] Booting Node 0, Processors #1
[ 0.152018] smpboot cpu 1: start_ip = 9a000
[ 0.259770] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.259915] #2
[ 0.259917] smpboot cpu 2: start_ip = 9a000
[ 0.367682] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.367821] #3 Ok.
[ 0.367822] smpboot cpu 3: start_ip = 9a000
[ 0.475690] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.475735] Brought up 4 CPUs
[ 0.475737] Total of 4 processors activated (17023.80 BogoMIPS).
[ 0.478861] devtmpfs: initialized
[ 0.483069] print_constraints: dummy:
[ 0.483136] NET: Registered protocol family 16
[ 0.483246] ACPI: bus type pci registered
[ 0.483314] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.483317] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.496742] PCI: Using configuration type 1 for base access
[ 0.497555] bio: create slab <bio-0> at 0
[ 0.497666] ACPI: Added _OSI(Module Device)
[ 0.497668] ACPI: Added _OSI(Processor Device)
[ 0.497671] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.497673] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.498676] ACPI: EC: Look up EC in DSDT
[ 0.502046] ACPI: Interpreter enabled
[ 0.502050] ACPI: (supports S0 S3 S4 S5)
[ 0.502078] ACPI: Using IOAPIC for interrupt routing
[ 0.507139] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[ 0.507536] ACPI: ACPI Dock Station Driver: 1 docks/bays found
[ 0.507539] HEST: Table not found.
[ 0.507542] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.507686] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.507893] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.507896] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.507898] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.507901] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000c3fff]
[ 0.507903] pci_root PNP0A08:00: host bridge window [mem 0x000c4000-0x000c7fff]
[ 0.507905] pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000cbfff]
[ 0.507908] pci_root PNP0A08:00: host bridge window [mem 0x000cc000-0x000cffff]
[ 0.507910] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[ 0.507912] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 0.507915] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.507917] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
[ 0.507919] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
[ 0.507922] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
[ 0.507924] pci_root PNP0A08:00: host bridge window [mem 0x000e8000-0x000ebfff]
[ 0.507926] pci_root PNP0A08:00: host bridge window [mem 0x000ec000-0x000effff]
[ 0.507929] pci_root PNP0A08:00: host bridge window [mem 0x000f0000-0x000fffff]
[ 0.507931] pci_root PNP0A08:00: host bridge window [mem 0x00000000-0xfebfffff]
[ 0.507933] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff]
[ 0.507937] pci_root PNP0A08:00: host bridge window expanded to [mem 0x00000000-0xfebfffff]; [mem 0x00000000-0xfebfffff] ignored
[ 0.507954] pci 0000:00:00.0: [8086:0044] type 0 class 0x000600
[ 0.507974] DMAR: Disabling batched IOTLB flush on Ironlake
[ 0.507998] pci 0000:00:01.0: [8086:0045] type 1 class 0x000604
[ 0.508032] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.508048] pci 0000:00:02.0: [8086:0046] type 0 class 0x000300
[ 0.508059] pci 0000:00:02.0: reg 10: [mem 0xcf800000-0xcfbfffff 64bit]
[ 0.508066] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.508071] pci 0000:00:02.0: reg 20: [io 0x1840-0x1847]
[ 0.508136] pci 0000:00:16.0: [8086:3b64] type 0 class 0x000780
[ 0.508164] pci 0000:00:16.0: reg 10: [mem 0xcfd27100-0xcfd2710f 64bit]
[ 0.508254] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.508289] pci 0000:00:19.0: [8086:10ea] type 0 class 0x000200
[ 0.508307] pci 0000:00:19.0: reg 10: [mem 0xcfd00000-0xcfd1ffff]
[ 0.508315] pci 0000:00:19.0: reg 14: [mem 0xcfd24000-0xcfd24fff]
[ 0.508325] pci 0000:00:19.0: reg 18: [io 0x1800-0x181f]
[ 0.508385] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.508412] pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03
[ 0.508433] pci 0000:00:1a.0: reg 10: [mem 0xcfd26800-0xcfd26bff]
[ 0.508522] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.508548] pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403
[ 0.508563] pci 0000:00:1b.0: reg 10: [mem 0xcfd20000-0xcfd23fff 64bit]
[ 0.508629] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.508653] pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604
[ 0.508723] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.508749] pci 0000:00:1c.3: [8086:3b48] type 1 class 0x000604
[ 0.508814] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.508837] pci 0000:00:1c.4: [8086:3b4a] type 1 class 0x000604
[ 0.508902] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.508934] pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03
[ 0.508954] pci 0000:00:1d.0: reg 10: [mem 0xcfd26c00-0xcfd26fff]
[ 0.509038] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.509062] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.509128] pci 0000:00:1f.0: [8086:3b07] type 0 class 0x000601
[ 0.509251] pci 0000:00:1f.2: [8086:3b2f] type 0 class 0x000106
[ 0.509275] pci 0000:00:1f.2: reg 10: [io 0x1848-0x184f]
[ 0.509285] pci 0000:00:1f.2: reg 14: [io 0x1858-0x185b]
[ 0.509295] pci 0000:00:1f.2: reg 18: [io 0x1850-0x1857]
[ 0.509306] pci 0000:00:1f.2: reg 1c: [io 0x185c-0x185f]
[ 0.509315] pci 0000:00:1f.2: reg 20: [io 0x1820-0x183f]
[ 0.509326] pci 0000:00:1f.2: reg 24: [mem 0xcfd26000-0xcfd267ff]
[ 0.509386] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.509410] pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05
[ 0.509424] pci 0000:00:1f.3: reg 10: [mem 0xcfd27000-0xcfd270ff 64bit]
[ 0.509445] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
[ 0.509482] pci 0000:00:1f.6: [8086:3b32] type 0 class 0x001180
[ 0.509505] pci 0000:00:1f.6: reg 10: [mem 0xcfd25000-0xcfd25fff 64bit]
[ 0.509604] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.509644] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.509689] pci 0000:00:1c.3: PCI bridge to [bus 03-03]
[ 0.509858] pci 0000:04:00.0: [8086:4238] type 0 class 0x000280
[ 0.509987] pci 0000:04:00.0: reg 10: [mem 0xcfc00000-0xcfc01fff 64bit]
[ 0.510632] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[ 0.510848] pci 0000:00:1c.4: PCI bridge to [bus 04-04]
[ 0.510854] pci 0000:00:1c.4: bridge window [mem 0xcfc00000-0xcfcfffff]
[ 0.510917] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
[ 0.510928] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.510930] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.510933] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfebfffff] (subtractive decode)
[ 0.510936] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
[ 0.510939] pci 0000:00:1e.0: bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
[ 0.510941] pci 0000:00:1e.0: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
[ 0.510944] pci 0000:00:1e.0: bridge window [mem 0x000cc000-0x000cffff] (subtractive decode)
[ 0.510947] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[ 0.510949] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.510953] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.510956] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[ 0.510958] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[ 0.510961] pci 0000:00:1e.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[ 0.510964] pci 0000:00:1e.0: bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
[ 0.510966] pci 0000:00:1e.0: bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
[ 0.510969] pci 0000:00:1e.0: bridge window [mem 0x000f0000-0x000fffff] (subtractive decode)
[ 0.510972] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
[ 0.510993] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.511249] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.511560] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 0.511918] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[ 0.512261] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.512307] pci0000:00: ACPI _OSC control (0x1d) granted
[ 0.516269] ACPI: PCI Root Bridge [UNCR] (domain 0000 [bus ff])
[ 0.516319] pci 0000:ff:00.0: [8086:2c62] type 0 class 0x000600
[ 0.516341] pci 0000:ff:00.1: [8086:2d01] type 0 class 0x000600
[ 0.516364] pci 0000:ff:02.0: [8086:2d10] type 0 class 0x000600
[ 0.516384] pci 0000:ff:02.1: [8086:2d11] type 0 class 0x000600
[ 0.516404] pci 0000:ff:02.2: [8086:2d12] type 0 class 0x000600
[ 0.516424] pci 0000:ff:02.3: [8086:2d13] type 0 class 0x000600
[ 0.516459] pci0000:ff: Requesting ACPI _OSC control (0x1d)
[ 0.516462] pci0000:ff: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.516464] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.516762] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.516819] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.516871] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.516923] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.516975] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.517027] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.517079] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.517131] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.517240] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.517251] vgaarb: loaded
[ 0.517252] vgaarb: bridge control possible 0000:00:02.0
[ 0.517303] PCI: Using ACPI for IRQ routing
[ 0.526033] PCI: pci_cache_line_size set to 64 bytes
[ 0.526154] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.526156] reserve RAM buffer: 00000000b76d0000 - 00000000b7ffffff
[ 0.526279] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.526285] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.528306] Switching to clocksource hpet
[ 0.530212] pnp: PnP ACPI init
[ 0.530229] ACPI: bus type pnp registered
[ 0.530330] pnp 00:00: [bus 00-ff]
[ 0.530333] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.530336] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.530338] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.530341] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.530343] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.530345] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.530349] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.530351] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.530353] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.530355] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.530357] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.530360] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.530362] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.530364] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.530366] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.530368] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.530370] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.530372] pnp 00:00: [mem 0x00000000-0xfebfffff window]
[ 0.530375] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 0.530424] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.530446] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
[ 0.530448] pnp 00:01: [mem 0xfed10000-0xfed13fff]
[ 0.530450] pnp 00:01: [mem 0xfed18000-0xfed18fff]
[ 0.530452] pnp 00:01: [mem 0xfed19000-0xfed19fff]
[ 0.530454] pnp 00:01: [mem 0xe0000000-0xe3ffffff]
[ 0.530456] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
[ 0.530458] pnp 00:01: [mem 0xfed40000-0xfed44fff]
[ 0.530460] pnp 00:01: [mem 0xfed45000-0xfed8ffff]
[ 0.530462] pnp 00:01: [mem 0x20000000-0x201fffff]
[ 0.530464] pnp 00:01: [mem 0x40000000-0x401fffff]
[ 0.530512] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.530515] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.530518] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.530521] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.530524] system 00:01: [mem 0xe0000000-0xe3ffffff] has been reserved
[ 0.530527] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.530530] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.530533] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.530536] system 00:01: [mem 0x20000000-0x201fffff] could not be reserved
[ 0.530539] system 00:01: [mem 0x40000000-0x401fffff] could not be reserved
[ 0.530542] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.530981] pnp 00:02: [io 0x0000-0x001f]
[ 0.530984] pnp 00:02: [io 0x0081-0x0091]
[ 0.530986] pnp 00:02: [io 0x0093-0x009f]
[ 0.530988] pnp 00:02: [io 0x00c0-0x00df]
[ 0.530990] pnp 00:02: [dma 4]
[ 0.531031] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.531041] pnp 00:03: [mem 0xff000000-0xffffffff]
[ 0.531078] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.531159] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[ 0.531217] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.531221] system 00:04: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.531235] pnp 00:05: [io 0x00f0]
[ 0.531244] pnp 00:05: [irq 13]
[ 0.531282] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.531294] pnp 00:06: [io 0x002e-0x002f]
[ 0.531296] pnp 00:06: [io 0x004e-0x004f]
[ 0.531298] pnp 00:06: [io 0x0061]
[ 0.531300] pnp 00:06: [io 0x0063]
[ 0.531302] pnp 00:06: [io 0x0065]
[ 0.531304] pnp 00:06: [io 0x0067]
[ 0.531305] pnp 00:06: [io 0x0080]
[ 0.531307] pnp 00:06: [io 0x0092]
[ 0.531309] pnp 00:06: [io 0x00b2-0x00b3]
[ 0.531311] pnp 00:06: [io 0x0500-0x057f]
[ 0.531313] pnp 00:06: [io 0x0480-0x04bf]
[ 0.531370] system 00:06: [io 0x0500-0x057f] has been reserved
[ 0.531373] system 00:06: [io 0x0480-0x04bf] has been reserved
[ 0.531376] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.531387] pnp 00:07: [io 0x0070-0x0077]
[ 0.531426] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.531447] pnp 00:08: [io 0x0060]
[ 0.531449] pnp 00:08: [io 0x0064]
[ 0.531455] pnp 00:08: [irq 1]
[ 0.531495] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.531515] pnp 00:09: [irq 12]
[ 0.531553] pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.531571] pnp 00:0a: [bus ff]
[ 0.531617] pnp 00:0a: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.531748] pnp: PnP ACPI: found 11 devices
[ 0.531750] ACPI: ACPI bus type pnp unregistered
[ 0.538698] PCI: max bus depth: 1 pci_try_num: 2
[ 0.538738] pci 0000:00:1c.3: BAR 14: assigned [mem 0xbc000000-0xbc1fffff]
[ 0.538742] pci 0000:00:1c.3: BAR 15: assigned [mem 0xbc200000-0xbc3fffff 64bit pref]
[ 0.538746] pci 0000:00:1c.3: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.538748] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.538754] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.538764] pci 0000:00:1c.3: PCI bridge to [bus 03-03]
[ 0.538767] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.538772] pci 0000:00:1c.3: bridge window [mem 0xbc000000-0xbc1fffff]
[ 0.538777] pci 0000:00:1c.3: bridge window [mem 0xbc200000-0xbc3fffff 64bit pref]
[ 0.538783] pci 0000:00:1c.4: PCI bridge to [bus 04-04]
[ 0.538788] pci 0000:00:1c.4: bridge window [mem 0xcfc00000-0xcfcfffff]
[ 0.538796] pci 0000:00:1e.0: PCI bridge to [bus 05-05]
[ 0.538818] pci 0000:00:01.0: setting latency timer to 64
[ 0.538830] pci 0000:00:1c.0: setting latency timer to 64
[ 0.538837] pci 0000:00:1c.3: enabling device (0000 -> 0003)
[ 0.538846] pci 0000:00:1c.3: setting latency timer to 64
[ 0.538854] pci 0000:00:1c.4: setting latency timer to 64
[ 0.538859] pci 0000:00:1e.0: setting latency timer to 64
[ 0.538863] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.538865] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.538868] pci_bus 0000:00: resource 6 [mem 0x00000000-0xfebfffff]
[ 0.538870] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.538872] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.538874] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.538876] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
[ 0.538879] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
[ 0.538881] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
[ 0.538883] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
[ 0.538885] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
[ 0.538887] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
[ 0.538889] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
[ 0.538892] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
[ 0.538894] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
[ 0.538896] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff]
[ 0.538898] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed44fff]
[ 0.538901] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.538903] pci_bus 0000:03: resource 1 [mem 0xbc000000-0xbc1fffff]
[ 0.538905] pci_bus 0000:03: resource 2 [mem 0xbc200000-0xbc3fffff 64bit pref]
[ 0.538908] pci_bus 0000:04: resource 1 [mem 0xcfc00000-0xcfcfffff]
[ 0.538910] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
[ 0.538912] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
[ 0.538914] pci_bus 0000:05: resource 6 [mem 0x00000000-0xfebfffff]
[ 0.538916] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.538919] pci_bus 0000:05: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.538921] pci_bus 0000:05: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.538923] pci_bus 0000:05: resource 10 [mem 0x000cc000-0x000cffff]
[ 0.538925] pci_bus 0000:05: resource 11 [mem 0x000d0000-0x000d3fff]
[ 0.538927] pci_bus 0000:05: resource 12 [mem 0x000d4000-0x000d7fff]
[ 0.538929] pci_bus 0000:05: resource 13 [mem 0x000d8000-0x000dbfff]
[ 0.538932] pci_bus 0000:05: resource 14 [mem 0x000dc000-0x000dffff]
[ 0.538934] pci_bus 0000:05: resource 15 [mem 0x000e0000-0x000e3fff]
[ 0.538936] pci_bus 0000:05: resource 16 [mem 0x000e4000-0x000e7fff]
[ 0.538938] pci_bus 0000:05: resource 17 [mem 0x000e8000-0x000ebfff]
[ 0.538940] pci_bus 0000:05: resource 18 [mem 0x000ec000-0x000effff]
[ 0.538942] pci_bus 0000:05: resource 19 [mem 0x000f0000-0x000fffff]
[ 0.538945] pci_bus 0000:05: resource 20 [mem 0xfed40000-0xfed44fff]
[ 0.539020] NET: Registered protocol family 2
[ 0.539159] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.540070] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.543127] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.543512] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.543515] TCP reno registered
[ 0.543524] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.543554] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.543709] NET: Registered protocol family 1
[ 0.543729] pci 0000:00:02.0: Boot video device
[ 0.543746] pci 0000:00:1a.0: enabling device (0004 -> 0006)
[ 0.543797] pci 0000:00:1d.0: enabling device (0004 -> 0006)
[ 0.543876] PCI: CLS 64 bytes, default 64
[ 0.543932] Unpacking initramfs...
[ 0.781646] Freeing initrd memory: 10220k freed
[ 0.784584] audit: initializing netlink socket (disabled)
[ 0.784602] type=2000 audit(0.628:1): initialized
[ 0.800714] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.801425] VFS: Disk quotas dquot_6.5.2
[ 0.801456] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.801533] msgmni has been set to 5767
[ 0.801696] alg: No test for stdrng (krng)
[ 0.801728] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.801732] io scheduler noop registered
[ 0.801733] io scheduler deadline registered
[ 0.801753] io scheduler cfq registered (default)
[ 0.801850] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.801880] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.801947] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.801981] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.802047] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.802082] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
[ 0.802161] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.802196] pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X
[ 0.802289] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[ 0.802292] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[ 0.802311] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.802316] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.802333] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[ 0.802337] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[ 0.802355] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[ 0.802357] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[ 0.802361] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[ 0.802379] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.802448] pciehp 0000:00:1c.3:pcie04: HPC vendor_id 8086 device_id 3b48 ss_vid 0 ss_did 0
[ 0.802475] pciehp 0000:00:1c.3:pcie04: service driver pciehp loaded
[ 0.802483] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.802485] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.802807] intel_idle: MWAIT substates: 0x21120
[ 0.802809] intel_idle: v0.4 model 0x25
[ 0.802811] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.802813] intel_idle: unaware of model 0x25 MWAIT 4 please contact lenb@kernel.org
[ 0.802856] ERST: Table is not found!
[ 0.802857] GHES: HEST is not enabled!
[ 0.802914] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.984456] Linux agpgart interface v0.103
[ 0.984540] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
[ 0.984566] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 0.985465] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[ 0.985640] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 0.985790] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.990984] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.990994] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.991143] mousedev: PS/2 mouse device common for all mice
[ 0.991194] rtc_cmos 00:07: RTC can wake from S4
[ 0.991323] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 0.991353] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.991449] cpuidle: using governor ladder
[ 0.991544] cpuidle: using governor menu
[ 0.991757] TCP cubic registered
[ 0.991919] NET: Registered protocol family 10
[ 0.992636] Mobile IPv6
[ 0.992639] NET: Registered protocol family 17
[ 0.992643] Registering the dns_resolver key type
[ 0.992820] PM: Hibernation image not present or could not be loaded.
[ 0.992834] registered taskstats version 1
[ 0.993455] rtc_cmos 00:07: setting system clock to 2014-02-01 17:41:02 UTC (1391276462)
[ 0.993496] Initializing network drop monitor service
[ 0.994865] Freeing unused kernel memory: 576k freed
[ 0.994956] Write protecting the kernel read-only data: 6144k
[ 0.997926] Freeing unused kernel memory: 652k freed
[ 1.000966] Freeing unused kernel memory: 688k freed
[ 1.001434] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.015102] udevd[58]: starting version 175
[ 1.030955] usbcore: registered new interface driver usbfs
[ 1.030990] usbcore: registered new interface driver hub
[ 1.040547] e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k
[ 1.040551] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
[ 1.040603] e1000e 0000:00:19.0: setting latency timer to 64
[ 1.040702] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[ 1.045201] SCSI subsystem initialized
[ 1.047725] usbcore: registered new device driver usb
[ 1.048244] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.048799] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.048803] ACPI: Thermal Zone [THM0] (40 C)
[ 1.050197] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.050200] ACPI: Thermal Zone [THM1] (27 C)
[ 1.057691] libata version 3.00 loaded.
[ 1.220584] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 5c:ff:35:04:d6:6d
[ 1.220588] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 1.220632] e1000e 0000:00:19.0: eth0: MAC: 9, PHY: 10, PBA No: A002FF-0FF
[ 1.220767] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.220772] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 1.220806] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.220843] ehci_hcd 0000:00:1a.0: debug port 2
[ 1.224733] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 1.224762] ehci_hcd 0000:00:1a.0: irq 23, io mem 0xcfd26800
[ 1.240117] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.240159] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.240164] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.240169] usb usb1: Product: EHCI Host Controller
[ 1.240172] usb usb1: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[ 1.240175] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.240435] hub 1-0:1.0: USB hub found
[ 1.240442] hub 1-0:1.0: 6 ports detected
[ 1.240558] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.240563] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 1.240573] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.240604] ehci_hcd 0000:00:1d.0: debug port 2
[ 1.244498] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 1.244518] ehci_hcd 0000:00:1d.0: irq 19, io mem 0xcfd26c00
[ 1.260120] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.260155] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.260160] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.260164] usb usb2: Product: EHCI Host Controller
[ 1.260168] usb usb2: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[ 1.260171] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.260438] hub 2-0:1.0: USB hub found
[ 1.260446] hub 2-0:1.0: 8 ports detected
[ 1.260547] ahci 0000:00:1f.2: version 3.0
[ 1.260616] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
[ 1.260665] ahci: SSS flag set, parallel bus scan disabled
[ 1.260706] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x33 impl SATA mode
[ 1.260712] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst
[ 1.260718] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.261763] scsi0 : ahci
[ 1.261907] scsi1 : ahci
[ 1.262009] scsi2 : ahci
[ 1.262114] scsi3 : ahci
[ 1.262214] scsi4 : ahci
[ 1.262315] scsi5 : ahci
[ 1.262458] ata1: SATA max UDMA/133 abar m2048@0xcfd26000 port 0xcfd26100 irq 45
[ 1.262462] ata2: SATA max UDMA/133 abar m2048@0xcfd26000 port 0xcfd26180 irq 45
[ 1.262464] ata3: DUMMY
[ 1.262465] ata4: DUMMY
[ 1.262468] ata5: SATA max UDMA/133 abar m2048@0xcfd26000 port 0xcfd26300 irq 45
[ 1.262471] ata6: SATA max UDMA/133 abar m2048@0xcfd26000 port 0xcfd26380 irq 45
[ 1.551988] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 1.579981] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.581378] ata1.00: ATA-8: ST9160310AS, SD04, max UDMA/133
[ 1.581384] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.583118] ata1.00: configured for UDMA/133
[ 1.583474] scsi 0:0:0:0: Direct-Access ATA ST9160310AS SD04 PQ: 0 ANSI: 5
[ 1.684610] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[ 1.684616] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.685143] hub 1-1:1.0: USB hub found
[ 1.685327] hub 1-1:1.0: 6 ports detected
[ 1.779898] Refined TSC clocksource calibration: 2128.000 MHz.
[ 1.779906] Switching to clocksource tsc
[ 1.795839] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 1.899838] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.928513] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[ 1.928519] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.929118] hub 2-1:1.0: USB hub found
[ 1.929349] hub 2-1:1.0: 8 ports detected
[ 1.999974] usb 1-1.3: new full-speed USB device number 3 using ehci_hcd
[ 2.096304] usb 1-1.3: New USB device found, idVendor=0a5c, idProduct=217f
[ 2.096310] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.096314] usb 1-1.3: Product: Broadcom Bluetooth Device
[ 2.096318] usb 1-1.3: Manufacturer: Broadcom Corp
[ 2.096321] usb 1-1.3: SerialNumber: 78DD08B4DE0B
[ 2.167907] usb 1-1.4: new full-speed USB device number 4 using ehci_hcd
[ 2.219703] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.261372] usb 1-1.4: New USB device found, idVendor=147e, idProduct=2016
[ 2.261378] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.261382] usb 1-1.4: Product: Biometric Coprocessor
[ 2.261385] usb 1-1.4: Manufacturer: UPEK
[ 2.331831] usb 1-1.6: new high-speed USB device number 5 using ehci_hcd
[ 2.433925] usb 1-1.6: New USB device found, idVendor=17ef, idProduct=4816
[ 2.433931] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.433936] usb 1-1.6: Product: Integrated Camera
[ 2.433939] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd.
[ 2.507763] usb 2-1.4: new high-speed USB device number 3 using ehci_hcd
[ 2.539572] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.543973] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 2.544062] sd 0:0:0:0: [sda] Write Protect is off
[ 2.544067] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.544121] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.601724] usb 2-1.4: config 1 has an invalid interface number: 1 but max is 0
[ 2.601730] usb 2-1.4: config 1 has no interface number 0
[ 2.603822] usb 2-1.4: New USB device found, idVendor=05c6, idProduct=9204
[ 2.603828] usb 2-1.4: New USB device strings: Mfr=3, Product=2, SerialNumber=0
[ 2.603832] usb 2-1.4: Product: Qualcomm Gobi 2000
[ 2.603836] usb 2-1.4: Manufacturer: Qualcomm Incorporated
[ 2.840491] sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
[ 2.841341] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.842892] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.175710] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 6.327476] udevd[363]: starting version 175
[ 7.449753] udevd[431]: renamed network interface eth0 to eth1
[ 7.506236] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:22/PNP0C09:00/PNP0C0E:00/input/input1
[ 7.506246] ACPI: Sleep Button [SLPB]
[ 7.506324] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:22/PNP0C09:00/PNP0C0D:00/input/input2
[ 7.506478] ACPI: Lid Switch [LID]
[ 7.506546] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 7.506551] ACPI: Power Button [PWRF]
[ 7.561558] ACPI: Requesting acpi_cpufreq
[ 7.601529] acpi device:06: registered as cooling_device0
[ 7.601645] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
[ 7.601655] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 7.717895] cfg80211: Calling CRDA to update world regulatory domain
[ 7.728572] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 7.795434] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ 7.838396] ACPI: AC Adapter [AC] (on-line)
[ 7.839051] ACPI: Battery Slot [BAT0] (battery absent)
[ 7.839197] ACPI: Battery Slot [BAT1] (battery absent)
[ 7.870947] iTCO_vendor_support: vendor-support=0
[ 7.927577] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 7.927672] iTCO_wdt: Found a QM57 TCO device (Version=2, TCOBASE=0x0560)
[ 7.927753] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 7.942298] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 18, expected 21)
[ 7.942336] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled
[ 7.942549] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
[ 8.121681] [drm] Initialized drm 1.1.0 20060810
[ 8.194581] i915 0000:00:02.0: setting latency timer to 64
[ 8.204824] i915 0000:00:02.0: irq 46 for MSI/MSI-X
[ 8.204830] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 8.204832] [drm] Driver supports precise vblank timestamp query.
[ 8.204900] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 8.225374] Bluetooth: Core ver 2.16
[ 8.225406] NET: Registered protocol family 31
[ 8.225409] Bluetooth: HCI device and connection manager initialized
[ 8.225413] Bluetooth: HCI socket layer initialized
[ 8.225416] Bluetooth: L2CAP socket layer initialized
[ 8.225423] Bluetooth: SCO socket layer initialized
[ 8.272103] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 8.272393] usbcore: registered new interface driver btusb
[ 8.370457] Non-volatile memory driver v1.3
[ 8.403312] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
[ 8.403314] Copyright(c) 2003-2011 Intel Corporation
[ 8.403436] iwlwifi 0000:04:00.0: setting latency timer to 64
[ 8.403480] iwlwifi 0000:04:00.0: pci_resource_len = 0x00002000
[ 8.403483] iwlwifi 0000:04:00.0: pci_resource_base = ffffc90000650000
[ 8.403486] iwlwifi 0000:04:00.0: HW Revision ID = 0x35
[ 8.403621] iwlwifi 0000:04:00.0: irq 47 for MSI/MSI-X
[ 8.403701] iwlwifi 0000:04:00.0: Detected Intel(R) Centrino(R) Ultimate-N 6300 AGN, REV=0x74
[ 8.403811] iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S
[ 8.414747] iwlwifi 0000:04:00.0: device EEPROM VER=0x436, CALIB=0x6
[ 8.414750] iwlwifi 0000:04:00.0: Device SKU: 0X1f0
[ 8.414752] iwlwifi 0000:04:00.0: Valid Tx ant: 0X7, Valid Rx ant: 0X7
[ 8.414784] iwlwifi 0000:04:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
[ 8.707899] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd047b3/0xb40000/0xa0000
[ 8.707916] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[ 8.708492] fbcon: inteldrmfb (fb0) is primary device
[ 8.765959] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[ 8.891651] Console: switching to colour frame buffer device 160x50
[ 8.895849] fb0: inteldrmfb frame buffer device
[ 8.895851] drm: registered panic notifier
[ 8.895882] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 8.896041] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[ 8.896073] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 9.000041] cfg80211: World regulatory domain updated:
[ 9.000044] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 9.000048] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9.000052] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 9.000055] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 9.000058] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9.000061] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9.021583] iwlwifi 0000:04:00.0: firmware: agent loaded iwlwifi-6000-4.ucode into memory
[ 9.021592] iwlwifi 0000:04:00.0: loaded firmware version 9.221.4.1 build 25532
[ 9.022060] Registered led device: phy0-led
[ 9.266752] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 9.297177] udevd[413]: renamed network interface wlan0 to wlan1
[ 9.696361] Linux media interface: v0.10
[ 9.725792] Linux video capture interface: v2.00
[ 9.737501] usbcore: registered new interface driver usbserial
[ 9.737512] USB Serial support registered for generic
[ 9.737566] usbcore: registered new interface driver usbserial_generic
[ 9.737568] usbserial: USB Serial Driver core
[ 9.756019] USB Serial support registered for Qualcomm USB modem
[ 9.756053] qcserial 2-1.4:1.1: Qualcomm USB modem converter detected
[ 9.756179] usb 2-1.4: Qualcomm USB modem converter now attached to ttyUSB0
[ 9.756202] usbcore: registered new interface driver qcserial
[ 9.885583] uvcvideo: Found UVC 1.00 device Integrated Camera (17ef:4816)
[ 9.887576] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input7
[ 9.887741] usbcore: registered new interface driver uvcvideo
[ 9.887745] USB Video Class driver (1.1.1)
[ 11.943607] hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x000f0000
[ 12.205549] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
[ 12.219672] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 12.219918] input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 13.143111] intel ips 0000:00:1f.6: i915 driver attached, reenabling gpu turbo
[ 14.077068] EXT4-fs (sda6): re-mounted. Opts: (null)
[ 14.380416] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[ 14.576680] loop: module loaded
[ 15.399627] FAT-fs (sda5): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 16.730258] RPC: Registered named UNIX socket transport module.
[ 16.730264] RPC: Registered udp transport module.
[ 16.730267] RPC: Registered tcp transport module.
[ 16.730269] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 16.780332] FS-Cache: Loaded
[ 16.798362] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 16.839188] FS-Cache: Netfs 'nfs' registered for caching
[ 16.879486] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 17.096368] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input10
[ 19.097033] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input11
[ 20.984078] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 20.984082] Bluetooth: BNEP filters: protocol multicast
[ 20.994313] Bluetooth: RFCOMM TTY layer initialized
[ 20.994323] Bluetooth: RFCOMM socket layer initialized
[ 20.994328] Bluetooth: RFCOMM ver 1.11
[ 21.447827] lp: driver loaded but no devices found
[ 21.657521] ppdev: user-space parallel port driver
[ 23.750801] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[ 23.806598] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[ 23.807363] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 23.827847] iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S
[ 23.828025] iwlwifi 0000:04:00.0: Radio type=0x0-0x3-0x1
[ 24.070515] iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S
[ 24.070710] iwlwifi 0000:04:00.0: Radio type=0x0-0x3-0x1
[ 24.204513] ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 25.368280] e1000e: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx
[ 25.368288] e1000e 0000:00:19.0: eth1: 10/100 speed: disabling TSO
[ 25.368951] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 36.009397] eth1: no IPv6 routers present