blob: b62270336157b8e5ecacb3c6e3c3b1a5dedc6c3f [file] [log] [blame]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.0.0-2-686-pae (debian-kernel@lists.debian.org) (gcc version 4.9.2 (Debian 4.9.2-18) ) #1 SMP Debian 4.0.4-1 (2015-05-26)
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c7f9dfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c7f9e000-0x00000000dfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: ASROCK E350M1/E350M1, BIOS 4.0-9989-gf2dfef0 06/13/2015
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x21f000 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-back
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FF8000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000021f000000 aka 8688M
[ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
[ 0.000000] found SMP MP-table at [mem 0x000f7910-0x000f791f] mapped at [c00f7910]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01dfffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x37600000-0x377fffff]
[ 0.000000] [mem 0x37600000-0x377fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x20000000-0x375fffff]
[ 0.000000] [mem 0x20000000-0x375fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x37800000-0x379fdfff]
[ 0.000000] [mem 0x37800000-0x379fdfff] page 4k
[ 0.000000] BRK [0x01814000, 0x01814fff] PGTABLE
[ 0.000000] BRK [0x01815000, 0x01816fff] PGTABLE
[ 0.000000] BRK [0x01817000, 0x01817fff] PGTABLE
[ 0.000000] BRK [0x01818000, 0x01818fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x35fa4000-0x36fc9fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F7B10 000024 (v02 CORE )
[ 0.000000] ACPI: XSDT 0x00000000C7FB80E0 000064 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: FACP 0x00000000C7FBA860 0000F4 (v04 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: DSDT 0x00000000C7FB8250 00260E (v02 ASROCK COREBOOT 00010001 INTL 20140926)
[ 0.000000] ACPI: FACS 0x00000000C7FB8210 000040
[ 0.000000] ACPI: SSDT 0x00000000C7FBA960 000045 (v02 CORE COREBOOT 0000002A CORE 0000002A)
[ 0.000000] ACPI: TCPA 0x00000000C7FBA9B0 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: APIC 0x00000000C7FBA9F0 00005C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: HEST 0x00000000C7FBAA50 000028 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: SSDT 0x00000000C7FBAA80 00168E (v02 AMD ALIB 00000001 MSFT 04000000)
[ 0.000000] ACPI: SSDT 0x00000000C7FBC110 0003DE (v01 AMD POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: HPET 0x00000000C7FBC4F0 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 7798MB HIGHMEM available.
[ 0.000000] 889MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 379fe000
[ 0.000000] low ram: 0 - 379fe000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] Normal [mem 0x0000000001000000-0x00000000379fdfff]
[ 0.000000] HighMem [mem 0x00000000379fe000-0x000000021effffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000c7f9dfff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000021effffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000021effffff]
[ 0.000000] On node 0 totalpages: 1994556
[ 0.000000] free_area_init_node: node 0, pgdat c16cbf00, node_mem_map f1348024
[ 0.000000] DMA zone: 36 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 1967 pages used for memmap
[ 0.000000] Normal zone: 223742 pages, LIFO batch:31
[ 0.000000] HighMem zone: 1766816 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 17 pages/cpu @f79ca000 s40524 r0 d29108 u69632
[ 0.000000] pcpu-alloc: s40524 r0 d29108 u69632 alloc=17*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1992553
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.0.0-2-686-pae root=UUID=0198e82a-32df-4f18-bec0-3e08802b084d ro quiet noisapnp pcie_aspm=force pcie_aspm.policy=powersave nmi_watchdog=0
[ 0.000000] PCIe ASPM is forcibly enabled
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000379fe:0021f000)
[ 0.000000] Initializing Movable for node 0 (00000000:00000000)
[ 0.000000] Memory: 7874136K/7978224K available (4930K kernel code, 571K rwdata, 1536K rodata, 664K init, 468K bss, 104088K reserved, 0K cma-reserved, 7067264K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)
.init : 0xc16e3000 - 0xc1789000 ( 664 kB)
.data : 0xc14d0d88 - 0xc16e1f40 (2116 kB)
.text : 0xc1000000 - 0xc14d0d88 (4931 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:2304 nr_irqs:440 16
[ 0.000000] CPU 0 irqstacks, hard=f742a000 soft=f742c000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1599.868 MHz processor
[ 0.000058] Calibrating delay loop (skipped), value calculated using timer frequency.. 3199.73 BogoMIPS (lpj=6399472)
[ 0.000066] pid_max: default: 32768 minimum: 301
[ 0.000083] ACPI: Core revision 20150204
[ 0.006506] ACPI: All ACPI Tables successfully acquired
[ 0.006551] Security Framework initialized
[ 0.006572] AppArmor: AppArmor disabled by boot time parameter
[ 0.006575] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.006610] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.006615] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.006992] Initializing cgroup subsys blkio
[ 0.006999] Initializing cgroup subsys memory
[ 0.007008] Initializing cgroup subsys devices
[ 0.007015] Initializing cgroup subsys freezer
[ 0.007022] Initializing cgroup subsys net_cls
[ 0.007028] Initializing cgroup subsys perf_event
[ 0.007034] Initializing cgroup subsys net_prio
[ 0.007076] CPU: Physical Processor ID: 0
[ 0.007079] CPU: Processor Core ID: 0
[ 0.007085] mce: CPU supports 6 MCE banks
[ 0.007104] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[ 0.007107] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
[ 0.007416] Freeing SMP alternatives memory: 24K (c1789000 - c178f000)
[ 0.009780] ftrace: allocating 21472 entries in 42 pages
[ 0.029454] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.029928] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.176506] smpboot: CPU0: AMD E-350D APU with Radeon(tm) HD Graphics (fam: 14, model: 02, stepping: 00)
[ 0.176567] Performance Events: AMD PMU driver.
[ 0.176577] ... version: 0
[ 0.176580] ... bit width: 48
[ 0.176583] ... generic registers: 4
[ 0.176586] ... value mask: 0000ffffffffffff
[ 0.176589] ... max period: 00007fffffffffff
[ 0.176591] ... fixed-purpose events: 0
[ 0.176594] ... event mask: 000000000000000f
[ 0.177789] CPU 1 irqstacks, hard=f752a000 soft=f752c000
[ 0.177795] x86: Booting SMP configuration:
[ 0.177799] .... node #0, CPUs: #1
[ 0.188801] Initializing CPU#1
[ 0.191001] x86: Booted up 1 node, 2 CPUs
[ 0.191008] smpboot: Total of 2 processors activated (6399.47 BogoMIPS)
[ 0.191948] devtmpfs: initialized
[ 0.192818] pinctrl core: initialized pinctrl subsystem
[ 0.193132] NET: Registered protocol family 16
[ 0.203340] cpuidle: using governor ladder
[ 0.212787] cpuidle: using governor menu
[ 0.213137] ACPI: bus type PCI registered
[ 0.213143] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.213561] PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
[ 0.213567] PCI: PCI BIOS revision 2.10 entry at 0xfd800, last bus=3
[ 0.213570] PCI: Using configuration type 1 for base access
[ 0.213573] PCI: Using configuration type 1 for extended access
[ 0.224777] ACPI: Added _OSI(Module Device)
[ 0.224785] ACPI: Added _OSI(Processor Device)
[ 0.224789] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.224793] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.227116] ACPI: Executed 2 blocks of module-level executable AML code
[ 0.231469] ACPI: Interpreter enabled
[ 0.231492] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150204/hwxface-580)
[ 0.231519] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.231523] ACPI: Using IOAPIC for interrupt routing
[ 0.231555] HEST: Table parsing has been initialized.
[ 0.231562] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.238579] ACPI: Power Resource [PFN0] (on)
[ 0.238993] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.239006] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.239157] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.239658] PCI host bridge to bus 0000:00
[ 0.239666] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.239672] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.239677] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.239682] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.239686] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff]
[ 0.239703] pci 0000:00:00.0: [1022:1510] type 00 class 0x060000
[ 0.239906] pci 0000:00:01.0: [1002:9802] type 00 class 0x030000
[ 0.239926] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff pref]
[ 0.239937] pci 0000:00:01.0: reg 0x14: [io 0x2000-0x20ff]
[ 0.239948] pci 0000:00:01.0: reg 0x18: [mem 0xf0100000-0xf013ffff]
[ 0.240021] pci 0000:00:01.0: supports D1 D2
[ 0.240103] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.240197] pci 0000:00:01.1: [1002:1314] type 00 class 0x040300
[ 0.240214] pci 0000:00:01.1: reg 0x10: [mem 0xf0140000-0xf0143fff]
[ 0.240297] pci 0000:00:01.1: supports D1 D2
[ 0.240377] pci 0000:00:01.1: System wakeup disabled by ACPI
[ 0.240579] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[ 0.240607] pci 0000:00:11.0: reg 0x10: [io 0x2410-0x2417]
[ 0.240622] pci 0000:00:11.0: reg 0x14: [io 0x2420-0x2423]
[ 0.240637] pci 0000:00:11.0: reg 0x18: [io 0x2418-0x241f]
[ 0.240652] pci 0000:00:11.0: reg 0x1c: [io 0x2424-0x2427]
[ 0.240666] pci 0000:00:11.0: reg 0x20: [io 0x2400-0x240f]
[ 0.240681] pci 0000:00:11.0: reg 0x24: [mem 0xf014b000-0xf014b3ff]
[ 0.240965] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[ 0.240986] pci 0000:00:12.0: reg 0x10: [mem 0xf0148000-0xf0148fff]
[ 0.241137] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.241304] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[ 0.241332] pci 0000:00:12.2: reg 0x10: [mem 0xf014b400-0xf014b4ff]
[ 0.241448] pci 0000:00:12.2: supports D1 D2
[ 0.241453] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.241537] pci 0000:00:12.2: System wakeup disabled by ACPI
[ 0.241701] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[ 0.241722] pci 0000:00:13.0: reg 0x10: [mem 0xf0149000-0xf0149fff]
[ 0.241873] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.242038] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[ 0.242066] pci 0000:00:13.2: reg 0x10: [mem 0xf014b500-0xf014b5ff]
[ 0.242182] pci 0000:00:13.2: supports D1 D2
[ 0.242186] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.242269] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 0.242435] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.242743] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[ 0.242775] pci 0000:00:14.2: reg 0x10: [mem 0xf0144000-0xf0147fff 64bit]
[ 0.242870] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.243098] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[ 0.243400] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.243526] pci 0000:00:14.4: System wakeup disabled by ACPI
[ 0.243681] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[ 0.243702] pci 0000:00:14.5: reg 0x10: [mem 0xf014a000-0xf014afff]
[ 0.243855] pci 0000:00:14.5: System wakeup disabled by ACPI
[ 0.244020] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
[ 0.244132] pci 0000:00:15.0: supports D1 D2
[ 0.244221] pci 0000:00:15.0: System wakeup disabled by ACPI
[ 0.244382] pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400
[ 0.244501] pci 0000:00:15.1: supports D1 D2
[ 0.244600] pci 0000:00:15.1: System wakeup disabled by ACPI
[ 0.244763] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000
[ 0.244941] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000
[ 0.245111] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000
[ 0.245280] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000
[ 0.245465] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000
[ 0.245631] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000
[ 0.245801] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000
[ 0.245968] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000
[ 0.246405] pci 0000:00:14.4: PCI bridge to [bus 01] (subtractive decode)
[ 0.246421] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.246426] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.246430] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.246435] pci 0000:00:14.4: bridge window [mem 0xe0000000-0xffffffff] (subtractive decode)
[ 0.246616] pci 0000:00:15.0: PCI bridge to [bus 02]
[ 0.246834] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[ 0.246864] pci 0000:03:00.0: reg 0x10: [io 0x1000-0x10ff]
[ 0.246905] pci 0000:03:00.0: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref]
[ 0.246932] pci 0000:03:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
[ 0.247068] pci 0000:03:00.0: supports D1 D2
[ 0.247072] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.252823] pci 0000:00:15.1: PCI bridge to [bus 03]
[ 0.252842] pci 0000:00:15.1: bridge window [io 0x1000-0x1fff]
[ 0.252857] pci 0000:00:15.1: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.252899] pci_bus 0000:00: on NUMA node 0
[ 0.253771] ACPI: PCI Interrupt Link [INTA] (IRQs 3 4 5 7 10 11 12 15) *0
[ 0.254014] ACPI: PCI Interrupt Link [INTB] (IRQs 3 4 5 7 10 11 12 15) *0
[ 0.254189] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 5 7 10 11 12 15) *0
[ 0.254287] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 7 10 11 12 15) *0
[ 0.254456] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 11 12 15) *0
[ 0.254553] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *0
[ 0.254645] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0
[ 0.254742] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0
[ 0.255094] ACPI: Enabled 6 GPEs in block 00 to 1F
[ 0.255587] vgaarb: setting as boot device: PCI:0000:00:01.0
[ 0.255597] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.255609] vgaarb: loaded
[ 0.255612] vgaarb: bridge control possible 0000:00:01.0
[ 0.255973] PCI: Using ACPI for IRQ routing
[ 0.255988] PCI: pci_cache_line_size set to 64 bytes
[ 0.256149] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.256155] e820: reserve RAM buffer [mem 0xc7f9e000-0xc7ffffff]
[ 0.256158] e820: reserve RAM buffer [mem 0x21f000000-0x21fffffff]
[ 0.256634] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.256644] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.258806] Switched to clocksource hpet
[ 0.271155] pnp: PnP ACPI init
[ 0.271636] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.271937] pnp: PnP ACPI: found 1 devices
[ 0.271947] PnPBIOS: Disabled by ACPI PNP
[ 0.318045] pci 0000:00:14.4: PCI bridge to [bus 01]
[ 0.318071] pci 0000:00:15.0: PCI bridge to [bus 02]
[ 0.318089] pci 0000:00:15.1: PCI bridge to [bus 03]
[ 0.318096] pci 0000:00:15.1: bridge window [io 0x1000-0x1fff]
[ 0.318109] pci 0000:00:15.1: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.318121] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.318126] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.318131] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.318135] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xffffffff]
[ 0.318140] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7 window]
[ 0.318145] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff window]
[ 0.318149] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.318153] pci_bus 0000:01: resource 7 [mem 0xe0000000-0xffffffff]
[ 0.318158] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
[ 0.318163] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.318338] NET: Registered protocol family 2
[ 0.318792] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.318912] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.318962] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.319009] TCP: reno registered
[ 0.319014] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.319028] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.319221] NET: Registered protocol family 1
[ 0.319257] pci 0000:00:01.0: Video device with shadowed ROM
[ 0.321699] PCI: CLS 64 bytes, default 64
[ 0.321806] Unpacking initramfs...
[ 0.979171] Freeing initrd memory: 16536K (f5fa4000 - f6fca000)
[ 0.979876] microcode: CPU0: patch_level=0x05000119
[ 0.980001] microcode: CPU1: patch_level=0x05000119
[ 0.980343] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.980365] LVT offset 0 assigned for vector 0x400
[ 0.980496] perf: AMD IBS detected (0x000000ff)
[ 0.981538] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.981699] audit: initializing netlink subsys (disabled)
[ 0.981737] audit: type=2000 audit(1434175918.868:1): initialized
[ 0.982638] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.982681] zpool: loaded
[ 0.982916] VFS: Disk quotas dquot_6.5.2
[ 0.983020] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.984489] alg: No test for stdrng (krng)
[ 0.984542] bounce: pool size: 64 pages
[ 0.984668] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.984750] io scheduler noop registered
[ 0.984757] io scheduler deadline registered
[ 0.984792] io scheduler cfq registered (default)
[ 0.986073] pcieport 0000:00:15.0: Signaling PME through PCIe PME interrupt
[ 0.986082] pcie_pme 0000:00:15.0:pcie01: service driver pcie_pme loaded
[ 0.986120] pcieport 0000:00:15.1: Signaling PME through PCIe PME interrupt
[ 0.986125] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 0.986133] pcie_pme 0000:00:15.1:pcie01: service driver pcie_pme loaded
[ 0.986149] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.986189] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.986315] GHES: Failed to enable APEI firmware first mode.
[ 0.986329] isapnp: ISA Plug & Play support disabled
[ 0.986706] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.007518] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.009425] Linux agpgart interface v0.103
[ 1.009874] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.014004] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.014027] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.014945] mousedev: PS/2 mouse device common for all mice
[ 1.015158] rtc_cmos 00:00: RTC can wake from S4
[ 1.015614] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[ 1.015732] rtc_cmos 00:00: alarms up to one day, 114 bytes nvram, hpet irqs
[ 1.015777] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.016118] TCP: cubic registered
[ 1.016253] NET: Registered protocol family 10
[ 1.016685] mip6: Mobile IPv6
[ 1.016693] NET: Registered protocol family 17
[ 1.016704] mpls_gso: MPLS GSO support
[ 1.017122] Using IPI No-Shortcut mode
[ 1.017890] registered taskstats version 1
[ 1.018850] rtc_cmos 00:00: setting system clock to 2015-06-13 06:11:59 UTC (1434175919)
[ 1.018963] PM: Hibernation image not present or could not be loaded.
[ 1.019548] Freeing unused kernel memory: 664K (c16e3000 - c1789000)
[ 1.019816] Write protecting the kernel text: 4932k
[ 1.019957] Write protecting the kernel read-only data: 1544k
[ 1.019960] NX-protecting the kernel data: 3260k
[ 1.113827] systemd-udevd[64]: starting version 215
[ 1.114596] random: systemd-udevd urandom read with 0 bits of entropy available
[ 1.133588] SCSI subsystem initialized
[ 1.141546] ACPI: bus type USB registered
[ 1.141614] usbcore: registered new interface driver usbfs
[ 1.141645] usbcore: registered new interface driver hub
[ 1.147075] usbcore: registered new device driver usb
[ 1.148160] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.148547] ehci-pci: EHCI PCI platform driver
[ 1.148980] QUIRK: Enable AMD PLL fix
[ 1.149029] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 1.149045] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.149061] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.149147] ehci-pci 0000:00:12.2: debug port 1
[ 1.149227] ehci-pci 0000:00:12.2: irq 17, io mem 0xf014b400
[ 1.149732] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.150255] libata version 3.00 loaded.
[ 1.159061] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.159193] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.159199] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.159203] usb usb1: Product: EHCI Host Controller
[ 1.159208] usb usb1: Manufacturer: Linux 4.0.0-2-686-pae ehci_hcd
[ 1.159212] usb usb1: SerialNumber: 0000:00:12.2
[ 1.159524] hub 1-0:1.0: USB hub found
[ 1.159540] hub 1-0:1.0: 5 ports detected
[ 1.161099] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 1.161116] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.161126] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.161142] ehci-pci 0000:00:13.2: debug port 1
[ 1.161197] ehci-pci 0000:00:13.2: irq 17, io mem 0xf014b500
[ 1.166131] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.166139] ACPI: Thermal Zone [TZ00] (40 C)
[ 1.170410] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.171084] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.171227] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.171232] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.171237] usb usb2: Product: EHCI Host Controller
[ 1.171241] usb usb2: Manufacturer: Linux 4.0.0-2-686-pae ehci_hcd
[ 1.171245] usb usb2: SerialNumber: 0000:00:13.2
[ 1.171572] hub 2-0:1.0: USB hub found
[ 1.171590] hub 2-0:1.0: 5 ports detected
[ 1.171643] r8169 0000:03:00.0 eth0: RTL8168e/8111e at 0xf823c000, bc:5f:f4:c8:d3:98, XID 0c200000 IRQ 26
[ 1.171650] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.172123] ahci 0000:00:11.0: version 3.0
[ 1.172640] ohci-pci: OHCI PCI platform driver
[ 1.172745] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 1.172753] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part
[ 1.175929] scsi host0: ahci
[ 1.176344] scsi host1: ahci
[ 1.176753] scsi host2: ahci
[ 1.177110] scsi host3: ahci
[ 1.177349] scsi host4: ahci
[ 1.177552] scsi host5: ahci
[ 1.177747] ata1: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b100 irq 19
[ 1.177753] ata2: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b180 irq 19
[ 1.177759] ata3: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b200 irq 19
[ 1.177764] ata4: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b280 irq 19
[ 1.177768] ata5: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b300 irq 19
[ 1.177773] ata6: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b380 irq 19
[ 1.178228] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 1.178256] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 1.178399] ohci-pci 0000:00:12.0: irq 18, io mem 0xf0148000
[ 1.235464] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.235473] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.235478] usb usb3: Product: OHCI PCI host controller
[ 1.235482] usb usb3: Manufacturer: Linux 4.0.0-2-686-pae ohci_hcd
[ 1.235486] usb usb3: SerialNumber: 0000:00:12.0
[ 1.236107] hub 3-0:1.0: USB hub found
[ 1.236132] hub 3-0:1.0: 5 ports detected
[ 1.236795] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 1.236809] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 4
[ 1.236862] ohci-pci 0000:00:13.0: irq 18, io mem 0xf0149000
[ 1.295333] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.295342] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.295347] usb usb4: Product: OHCI PCI host controller
[ 1.295351] usb usb4: Manufacturer: Linux 4.0.0-2-686-pae ohci_hcd
[ 1.295355] usb usb4: SerialNumber: 0000:00:13.0
[ 1.295999] hub 4-0:1.0: USB hub found
[ 1.296026] hub 4-0:1.0: 5 ports detected
[ 1.296698] ohci-pci 0000:00:14.5: OHCI PCI host controller
[ 1.296712] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 5
[ 1.296760] ohci-pci 0000:00:14.5: irq 18, io mem 0xf014a000
[ 1.355329] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.355338] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.355343] usb usb5: Product: OHCI PCI host controller
[ 1.355347] usb usb5: Manufacturer: Linux 4.0.0-2-686-pae ohci_hcd
[ 1.355351] usb usb5: SerialNumber: 0000:00:14.5
[ 1.355969] hub 5-0:1.0: USB hub found
[ 1.355994] hub 5-0:1.0: 2 ports detected
[ 1.483242] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.495212] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.495265] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.495307] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.495361] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.495392] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.632769] usb 2-1: New USB device found, idVendor=148f, idProduct=2870
[ 1.632786] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.632795] usb 2-1: Product: 802.11 n WLAN
[ 1.632803] usb 2-1: Manufacturer: Ralink
[ 1.667134] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.667926] ata3.00: ATA-9: M4-CT256M4SSD2, 070H, max UDMA/100
[ 1.667936] ata3.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.668732] ata3.00: configured for UDMA/100
[ 1.669370] scsi 2:0:0:0: Direct-Access ATA M4-CT256M4SSD2 070H PQ: 0 ANSI: 5
[ 1.676592] usb 3-1: new low-speed USB device number 2 using ohci-pci
[ 1.678652] sd 2:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[ 1.678797] sd 2:0:0:0: [sda] Write Protect is off
[ 1.678844] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.678893] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.679725] sda: sda1 sda2
[ 1.681340] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.682613] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 1.740498] device-mapper: uevent: version 1.0.3
[ 1.740677] device-mapper: ioctl: 4.30.0-ioctl (2014-12-22) initialised: dm-devel@redhat.com
[ 1.845447] usb 3-1: New USB device found, idVendor=1241, idProduct=1122
[ 1.845464] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.850391] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.859557] usbcore: registered new interface driver usbhid
[ 1.859564] usbhid: USB HID core driver
[ 1.861181] input: HID 1241:1122 as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/0003:1241:1122.0001/input/input2
[ 1.861364] hid-generic 0003:1241:1122.0001: input,hidraw0: USB HID v1.00 Mouse [HID 1241:1122] on usb-0000:00:12.0-1/input0
[ 1.979186] tsc: Refined TSC clocksource calibration: 1599.999 MHz
[ 1.983143] usb 3-2: new low-speed USB device number 3 using ohci-pci
[ 2.155413] usb 3-2: New USB device found, idVendor=046d, idProduct=c312
[ 2.155430] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.155439] usb 3-2: Product: USB Multimedia Keyboard
[ 2.155447] usb 3-2: Manufacturer: LITEON Technology
[ 2.164232] input: LITEON Technology USB Multimedia Keyboard as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/0003:046D:C312.0002/input/input3
[ 2.219563] hid-generic 0003:046D:C312.0002: input,hidraw1: USB HID v1.10 Keyboard [LITEON Technology USB Multimedia Keyboard] on usb-0000:00:12.0-2/input0
[ 2.979478] Switched to clocksource tsc
[ 9.706338] NET: Registered protocol family 38
[ 10.083700] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 10.743764] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 10.743898] systemd[1]: Found ordering cycle on basic.target/start
[ 10.743907] systemd[1]: Found dependency on sysinit.target/start
[ 10.743914] systemd[1]: Found dependency on rpcbind.service/start
[ 10.743922] systemd[1]: Found dependency on network-online.target/start
[ 10.743928] systemd[1]: Found dependency on network.target/start
[ 10.743935] systemd[1]: Found dependency on systemd-networkd.service/start
[ 10.743941] systemd[1]: Found dependency on dbus.service/start
[ 10.743947] systemd[1]: Found dependency on basic.target/start
[ 10.743954] systemd[1]: Breaking ordering cycle by deleting job rpcbind.service/start
[ 10.743962] systemd[1]: Job rpcbind.service/start deleted to break ordering cycle starting with basic.target/start
[ 10.821918] random: nonblocking pool is initialized
[ 11.910430] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
[ 12.040367] lp: driver loaded but no devices found
[ 12.053066] ppdev: user-space parallel port driver
[ 12.079968] parport0: PC-style at 0x378 [PCSPP,EPP]
[ 12.079985] parport0: irq 0 detected
[ 12.122453] systemd-udevd[245]: starting version 215
[ 12.175123] lp0: using parport0 (polling).
[ 12.197429] fuse init (API version 7.23)
[ 12.215514] w83627ehf: Found NCT6775F chip at 0x290
[ 12.429257] ACPI: acpi_idle registered with cpuidle
[ 12.433627] acpi-cpufreq: overriding BIOS provided _PSD data
[ 12.479753] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B07 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0B (\SMB0) (20150204/utaddress-254)
[ 12.479773] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 12.480595] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[ 12.480606] ACPI: Power Button [PWRB]
[ 12.480729] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 12.480734] ACPI: Power Button [PWRF]
[ 12.488798] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[ 12.488925] sp5100_tco: PCI Revision ID: 0x42
[ 12.489041] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
[ 12.489056] sp5100_tco: Last reboot was not triggered by watchdog.
[ 12.489182] sp5100_tco: initialized (0xf839eb00). heartbeat=60 sec (nowayout=0)
[ 12.510584] [drm] Initialized drm 1.1.0 20060810
[ 12.620747] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 12.627126] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input6
[ 12.663374] sound hdaudioC1D0: ALC892: SKU not ready 0x00000100
[ 12.663990] sound hdaudioC1D0: autoconfig for ALC892: line_outs=4 (0x14/0x16/0x15/0x17/0x0) type:line
[ 12.663996] sound hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 12.664001] sound hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 12.664006] sound hdaudioC1D0: mono: mono_out=0x0
[ 12.664010] sound hdaudioC1D0: dig-out=0x1e/0x0
[ 12.664014] sound hdaudioC1D0: inputs:
[ 12.664019] sound hdaudioC1D0: Rear Mic=0x18
[ 12.664024] sound hdaudioC1D0: Front Mic=0x19
[ 12.664028] sound hdaudioC1D0: Line=0x1a
[ 12.664032] sound hdaudioC1D0: CD=0x1c
[ 12.721800] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/sound/card1/hdaudioC1D0/input7
[ 12.726930] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input8
[ 12.727019] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input9
[ 12.727102] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
[ 12.727185] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
[ 12.727266] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card1/input12
[ 12.727349] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card1/input13
[ 12.727431] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card1/input14
[ 12.727507] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input15
[ 12.931403] r8169 0000:03:00.0 eth10: renamed from eth0
[ 12.943863] [drm] radeon kernel modesetting enabled.
[ 12.947123] systemd-udevd[281]: renamed network interface eth0 to eth10
[ 12.948344] kvm: Nested Virtualization enabled
[ 12.948354] kvm: Nested Paging enabled
[ 12.985047] [drm] initializing kernel modesetting (PALM 0x1002:0x9802 0x1002:0x9802).
[ 12.985084] [drm] register mmio base: 0xF0100000
[ 12.985087] [drm] register mmio size: 262144
[ 12.985178] ATOM BIOS: AMD
[ 12.985451] radeon 0000:00:01.0: VRAM: 384M 0x0000000000000000 - 0x0000000017FFFFFF (384M used)
[ 12.985459] radeon 0000:00:01.0: GTT: 1024M 0x0000000018000000 - 0x0000000057FFFFFF
[ 12.985464] [drm] Detected VRAM RAM=384M, BAR=256M
[ 12.985467] [drm] RAM width 32bits DDR
[ 13.035290] cfg80211: Calling CRDA to update world regulatory domain
[ 13.139359] [TTM] Zone kernel: Available graphics memory: 412048 kiB
[ 13.139368] [TTM] Zone highmem: Available graphics memory: 3945680 kiB
[ 13.139371] [TTM] Initializing pool allocator
[ 13.139384] [TTM] Initializing DMA pool allocator
[ 13.139446] [drm] radeon: 384M of VRAM memory ready
[ 13.139450] [drm] radeon: 1024M of GTT memory ready.
[ 13.139487] [drm] Loading PALM Microcode
[ 13.165639] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/PALM_pfp.bin
[ 13.170749] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/PALM_me.bin
[ 13.179362] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,discard
[ 13.182775] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/SUMO_rlc.bin
[ 13.182923] [drm] Internal thermal controller without fan control
[ 13.183049] [drm] Found smc ucode version: 0x00010601
[ 13.183150] [drm] radeon: dpm initialized
[ 13.195085] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/SUMO_uvd.bin
[ 13.195186] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 13.206232] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
[ 13.206449] radeon 0000:00:01.0: WB enabled
[ 13.206458] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000018000c00 and cpu addr 0xffac8c00
[ 13.206464] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000018000c0c and cpu addr 0xffac8c0c
[ 13.208297] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xf8bb2118
[ 13.215337] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 13.215346] [drm] Driver supports precise vblank timestamp query.
[ 13.215355] radeon 0000:00:01.0: radeon: MSI limited to 32-bit
[ 13.215411] radeon 0000:00:01.0: radeon: using MSI.
[ 13.215452] [drm] radeon: irq initialized.
[ 13.240369] [drm] ring test on 0 succeeded in 1 usecs
[ 13.240385] [drm] ring test on 3 succeeded in 3 usecs
[ 13.247254] usb 2-1: reset high-speed USB device number 2 using ehci-pci
[ 13.303161] [drm] ring test on 5 succeeded in 1 usecs
[ 13.313484] cfg80211: World regulatory domain updated:
[ 13.313497] cfg80211: DFS Master region: unset
[ 13.313502] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 13.313508] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 13.313512] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 13.313517] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 13.313522] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 13.313527] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 13.313531] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 13.313535] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 13.313539] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 13.323354] [drm] UVD initialized successfully.
[ 13.326078] [drm] ib test on ring 0 succeeded in 0 usecs
[ 13.326123] [drm] ib test on ring 3 succeeded in 0 usecs
[ 13.388472] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 2872, rev 0202 detected
[ 13.442998] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0001 detected
[ 13.466740] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 13.467455] usbcore: registered new interface driver rt2800usb
[ 13.491274] rt2800usb 2-1:1.0 wlan1: renamed from wlan0
[ 13.496244] systemd-udevd[276]: renamed network interface wlan0 to wlan1
[ 13.636531] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: discard
[ 13.682049] systemd-journald[233]: Received request to flush runtime journal from PID 1
[ 13.846878] [drm] ib test on ring 5 succeeded
[ 13.868241] [drm] Radeon Display Connectors
[ 13.868249] [drm] Connector 0:
[ 13.868252] [drm] HDMI-A-1
[ 13.868254] [drm] HPD1
[ 13.868259] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[ 13.868262] [drm] Encoders:
[ 13.868265] [drm] DFP1: INTERNAL_UNIPHY
[ 13.868267] [drm] Connector 1:
[ 13.868270] [drm] HDMI-A-2
[ 13.868272] [drm] HPD2
[ 13.868276] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[ 13.868278] [drm] Encoders:
[ 13.868280] [drm] DFP2: INTERNAL_UNIPHY
[ 13.868282] [drm] Connector 2:
[ 13.868285] [drm] VGA-1
[ 13.868288] [drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
[ 13.868290] [drm] Encoders:
[ 13.868293] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 13.909473] [drm] fb mappable at 0xE0478000
[ 13.909478] [drm] vram apper at 0xE0000000
[ 13.909481] [drm] size 5242880
[ 13.909483] [drm] fb depth is 24
[ 13.909485] [drm] pitch is 5120
[ 13.909693] fbcon: radeondrmfb (fb0) is primary device
[ 13.952340] Console: switching to colour frame buffer device 160x64
[ 13.963275] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
[ 13.963277] radeon 0000:00:01.0: registered panic notifier
[ 13.975119] [drm] Initialized radeon 2.41.0 20080528 for 0000:00:01.0 on minor 0
[ 14.453603] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[ 14.454586] rt2800usb 2-1:1.0: firmware: direct-loading firmware rt2870.bin
[ 14.454614] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
[ 14.670659] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 15.283349] r8169 0000:03:00.0: firmware: direct-loading firmware rtl_nic/rtl8168e-2.fw
[ 15.588162] r8169 0000:03:00.0 eth10: link down
[ 15.588310] IPv6: ADDRCONF(NETDEV_UP): eth10: link is not ready
[ 30.698949] wlan1: authenticate with 34:31:c4:05:4c:e7
[ 30.747065] wlan1: send auth to 34:31:c4:05:4c:e7 (try 1/3)
[ 30.749478] wlan1: authenticated
[ 30.751728] wlan1: associate with 34:31:c4:05:4c:e7 (try 1/3)
[ 30.759298] wlan1: RX AssocResp from 34:31:c4:05:4c:e7 (capab=0x431 status=0 aid=6)
[ 30.775785] wlan1: associated
[ 30.775817] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 30.779491] cfg80211: Calling CRDA for country: DE
[ 30.816213] cfg80211: Regulatory domain changed to country: DE
[ 30.816227] cfg80211: DFS Master region: ETSI
[ 30.816231] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 30.816238] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 30.816245] cfg80211: (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 30.816251] cfg80211: (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 30.816256] cfg80211: (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2698 mBm), (0 s)
[ 30.816261] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)