| |
| coreboot-4.11-1594-g6daa8c3ba5-dirty Fri Mar 13 02:50:21 UTC 2020 bootblock starting (log level: 7)... |
| Timestamp - end of bootblock: 5179724420 |
| FMAP: Found "FLASH" version 1.1 at 0xb10000. |
| FMAP: base = 0xff400000 size = 0xc00000 #areas = 4 |
| FMAP: area COREBOOT found @ b10200 (982528 bytes) |
| CBFS: Locating 'fallback/romstage' |
| CBFS: Found @ offset 80 size 8dc4 |
| Timestamp - starting to load romstage: 5180065280 |
| Timestamp - finished loading romstage: 5180109974 |
| BS: bootblock times (exec / console): total (unknown) / 0 ms |
| |
| |
| coreboot-4.11-1594-g6daa8c3ba5-dirty Fri Mar 13 02:50:21 UTC 2020 romstage starting (log level: 7)... |
| Disabling Watchdog reboot... done. |
| SMBus controller enabled |
| Setting up static northbridge registers... done. |
| Started PEG11 link training. |
| Temporarily hiding PEG11. |
| Started PEG10 link training. |
| Temporarily hiding PEG10. |
| Initializing IGD... |
| Back from haswell_early_initialization() |
| Timestamp - before RAM initialization: 5182735441 |
| CPU id(306c3) ucode:00000027 Intel(R) Core(TM) i5-4300M CPU @ 2.60GHz |
| AES supported, TXT supported, VT supported |
| PCH type: QM87, device id: 8c4f, rev id 5 |
| Starting UEFI PEI System Agent |
| FMAP: area RW_MRC_CACHE found @ b00000 (65536 bytes) |
| MRC: no data in 'RW_MRC_CACHE' |
| FMAP: area COREBOOT found @ b10200 (982528 bytes) |
| CBFS: Locating 'mrc.bin' |
| CBFS: Found @ offset 8fdc0 size 2e6e4 |
| System Agent: Starting up... |
| System Agent: Initializing PCH |
| install_ppi: overwrite GUID {ed097352-9041-445a-80b6-b29d509e8845} |
| install_ppi: overwrite GUID {908c7f8b-5c48-47fb-8357-f5fd4e235276} |
| System Agent: Initializing PCH (SMBUS) |
| System Agent: Initializing PCH (USB) |
| System Agent: Initializing PCH (SA Init) |
| System Agent: Initializing PCH (Me UMA) |
| System Agent: Initializing Memory |
| System Agent: Done. |
| Sanity checking heap. |
| System Agent Version 1.6.1 Build 2 |
| memcfg DDR3 clock 1600 MHz |
| memcfg channel assignment: A: 0, B 1, C 2 |
| memcfg channel[0] config (00620010): |
| ECC inactive |
| enhanced interleave mode on |
| rank interleave on |
| DIMMA 4096 MB width x8 or x32 dual rank, selected |
| DIMMB 0 MB width x8 or x32 single rank |
| memcfg channel[1] config (00620010): |
| ECC inactive |
| enhanced interleave mode on |
| rank interleave on |
| DIMMA 4096 MB width x8 or x32 dual rank, selected |
| DIMMB 0 MB width x8 or x32 single rank |
| Timestamp - after RAM initialization: 21571893239 |
| ME: FW Partition Table : OK |
| ME: Bringup Loader Failure : NO |
| ME: Firmware Init Complete : NO |
| ME: Manufacturing Mode : YES |
| ME: Boot Options Present : NO |
| ME: Update In Progress : NO |
| ME: Current Working State : Initializing |
| ME: Current Operation State : Bring up |
| ME: Current Operation Mode : Debug |
| ME: Error Code : No Error |
| ME: Progress Phase : BUP Phase |
| ME: Power Management Event : Clean Moff->Mx wake |
| ME: Progress Phase State : 0x4d |
| CBMEM: |
| IMD: root @ 0x7f7ff000 254 entries. |
| IMD: root @ 0x7f7fec00 62 entries. |
| External stage cache: |
| IMD: root @ 0x7fbff000 254 entries. |
| IMD: root @ 0x7fbfec00 62 entries. |
| Unhiding PEG10. |
| Unhiding PEG11. |
| FMAP: area COREBOOT found @ b10200 (982528 bytes) |
| CBFS: Locating 'cmos_layout.bin' |
| CBFS: Found @ offset 37a40 size 574 |
| SMM Memory Map |
| SMRAM : 0x7f800000 0x800000 |
| Subregion 0: 0x7f800000 0x300000 |
| Subregion 1: 0x7fb00000 0x100000 |
| Subregion 2: 0x7fc00000 0x400000 |
| MTRR Range: Start=7f000000 End=80000000 (Size 1000000) |
| MTRR Range: Start=ff800000 End=0 (Size 800000) |
| FMAP: area COREBOOT found @ b10200 (982528 bytes) |
| CBFS: Locating 'fallback/postcar' |
| CBFS: Found @ offset 38000 size 5d7c |
| Decompressing stage fallback/postcar @ 0x7f7d0fc0 (40016 bytes) |
| Loading module at 0x7f7d1000 with entry 0x7f7d1000. filesize: 0x5890 memsize: 0x9c10 |
| Processing 292 relocs. Offset value of 0x7d7d1000 |
| Timestamp - end of romstage: 21592812956 |
| BS: romstage times (exec / console): total (unknown) / 1 ms |
| |
| |
| coreboot-4.11-1594-g6daa8c3ba5-dirty Fri Mar 13 02:50:21 UTC 2020 postcar starting (log level: 7)... |
| usbdebug: Failed hardware init |
| Timestamp - start of postcar: 21595950103 |
| Timestamp - end of postcar: 21595964624 |
| FMAP: area COREBOOT found @ b10200 (982528 bytes) |
| CBFS: Locating 'fallback/ramstage' |
| CBFS: Found @ offset 13f40 size 1bfd8 |
| Timestamp - starting to load ramstage: 21596013296 |
| Decompressing stage fallback/ramstage @ 0x7f781fc0 (318840 bytes) |
| Timestamp - starting LZMA decompress (ignore for x86): 21596042481 |
| Timestamp - finished LZMA decompress (ignore for x86): 21702953129 |
| Loading module at 0x7f782000 with entry 0x7f782000. filesize: 0x38518 memsize: 0x4dd38 |
| Processing 3874 relocs. Offset value of 0x7e982000 |
| Timestamp - finished loading ramstage: 21703523699 |
| BS: postcar times (exec / console): total (unknown) / 0 ms |
| |
| |
| coreboot-4.11-1594-g6daa8c3ba5-dirty Fri Mar 13 02:50:21 UTC 2020 ramstage starting (log level: 7)... |
| usbdebug: Failed hardware init |
| Timestamp - start of ramstage: 21704005713 |
| Normal boot |
| Timestamp - device enumeration: 21704030452 |
| Enumerating buses... |
| Root Device scanning... |
| CPU_CLUSTER: 0 enabled |
| DOMAIN: 0000 enabled |
| DOMAIN: 0000 scanning... |
| PCI: pci_scan_bus for bus 00 |
| PCI: 00:00.0 [8086/0c04] enabled |
| PCI: Static device PCI: 00:01.0 not found, disabling it. |
| PCI: 00:01.1 [8086/0c05] enabled |
| PCI: 00:02.0 [8086/0416] enabled |
| PCI: 00:03.0 [8086/0c0c] enabled |
| PCI: 00:04.0 [8086/0c03] enabled |
| PCI: 00:14.0 [8086/8c31] enabled |
| PCI: 00:16.0 [8086/8c3a] enabled |
| PCI: 00:16.1: Disabling device |
| PCI: 00:16.2: Disabling device |
| PCI: 00:16.3: Disabling device |
| PCI: 00:19.0 [8086/153a] enabled |
| PCI: 00:1a.0 [8086/8c2d] enabled |
| PCI: 00:1b.0 [8086/8c20] enabled |
| PCIe Root Port 1 ASPM is disabled |
| PCI: 00:1c.0 [8086/8c10] enabled |
| PCIe Root Port 2 ASPM is disabled |
| PCI: 00:1c.1 [8086/8c12] enabled |
| PCI: 00:1c.2 [8086/8c14] disabled |
| PCI: 00:1c.3 [8086/8c16] disabled |
| PCI: 00:1c.4 [8086/8c18] disabled |
| PCI: 00:1d.0 [8086/8c26] enabled |
| PCI: 00:1f.0 [8086/8c4f] enabled |
| PCI: 00:1f.2 [8086/8c03] enabled |
| PCI: 00:1f.3 [8086/8c22] enabled |
| PCI: 00:1f.5: Disabling device |
| PCI: 00:1f.6: Disabling device |
| PCI: Leftover static devices: |
| PCI: 00:01.0 |
| PCI: 00:16.1 |
| PCI: 00:16.2 |
| PCI: 00:16.3 |
| PCI: 00:1c.5 |
| PCI: 00:1c.6 |
| PCI: 00:1c.7 |
| PCI: 00:1f.5 |
| PCI: 00:1f.6 |
| PCI: Check your devicetree.cb. |
| PCI: 00:01.1 scanning... |
| PCI: pci_scan_bus for bus 01 |
| scan_bus: bus PCI: 00:01.1 finished in 0 msecs |
| PCI: 00:1c.0 scanning... |
| PCI: pci_scan_bus for bus 02 |
| PCI: 02:00.0 [10ec/5227] enabled |
| Enabling Common Clock Configuration |
| ASPM: Enabled L0s and L1 |
| PCIe: Max_Payload_Size adjusted to 128 |
| scan_bus: bus PCI: 00:1c.0 finished in 0 msecs |
| PCI: 00:1c.1 scanning... |
| PCI: pci_scan_bus for bus 03 |
| PCI: 03:00.0 [168c/0034] enabled |
| Enabling Common Clock Configuration |
| PCIE CLK PM is not supported by endpoint |
| ASPM: Enabled L0s and L1 |
| PCIe: Max_Payload_Size adjusted to 128 |
| Failed to enable LTR for dev = PCI: 03:00.0 |
| scan_bus: bus PCI: 00:1c.1 finished in 0 msecs |
| PCI: 00:1f.0 scanning... |
| No CMOS option 'touchpad'. |
| PMH7: ID 05 Revision 12 |
| PNP: 00ff.1 enabled |
| H8: EC Firmware ID GLHT29WW-3.23, Version 2.01B |
| H8: BDC detection not implemented. Assuming BDC installed |
| No CMOS option 'bluetooth'. |
| H8: WWAN detection not implemented. Assuming WWAN installed |
| No CMOS option 'wwan'. |
| PNP: 00ff.2 enabled |
| PNP: 0c31.0 enabled |
| scan_bus: bus PCI: 00:1f.0 finished in 4 msecs |
| PCI: 00:1f.3 scanning... |
| scan_bus: bus PCI: 00:1f.3 finished in 0 msecs |
| scan_bus: bus DOMAIN: 0000 finished in 5 msecs |
| scan_bus: bus Root Device finished in 5 msecs |
| done |
| BS: BS_DEV_ENUMERATE run times (exec / console): 6 / 0 ms |
| FMAP: area RW_MRC_CACHE found @ b00000 (65536 bytes) |
| MRC: Checking cached data update for 'RW_MRC_CACHE'. |
| flash size 0x2800000 bytes |
| SF: Detected 00 0000 with sector size 0x1000, total 0x2800000 |
| SF size 0x2800000 does not correspond to CONFIG_ROM_SIZE 0xc00000!! |
| MRC: no data in 'RW_MRC_CACHE' |
| MRC: cache data 'RW_MRC_CACHE' needs update. |
| SF: Successfully written 2 bytes @ 0xb00000 |
| SF: Successfully written 2 bytes @ 0xb00002 |
| SF: Successfully written 4068 bytes @ 0xb00020 |
| BS: BS_DEV_ENUMERATE exit times (exec / console): 9 / 0 ms |
| Timestamp - device configuration: 21742298773 |
| found VGA at PCI: 00:02.0 |
| Setting up VGA for PCI: 00:02.0 |
| Setting PCI_BRIDGE_CTL_VGA for bridge DOMAIN: 0000 |
| Setting PCI_BRIDGE_CTL_VGA for bridge Root Device |
| Allocating resources... |
| Reading resources... |
| mc_add_fixed_mmio_resources: Adding PCIEXBAR @ 60 0xf0000000-0xf3ffffff. |
| mc_add_fixed_mmio_resources: Adding MCHBAR @ 48 0xfed10000-0xfed17fff. |
| mc_add_fixed_mmio_resources: Adding DMIBAR @ 68 0xfed18000-0xfed18fff. |
| mc_add_fixed_mmio_resources: Adding EPBAR @ 40 0xfed19000-0xfed19fff. |
| mc_add_fixed_mmio_resources: Adding GDXCBAR @ 5420 0xfed84000-0xfed84fff. |
| MC MAP: TOM: 0x200000000 |
| MC MAP: TOUUD: 0x27de00000 |
| MC MAP: MESEG_BASE: 0x7ffff00000 |
| MC MAP: MESEG_LIMIT: 0xfffff |
| MC MAP: REMAP_BASE: 0x200000000 |
| MC MAP: REMAP_LIMIT: 0x27ddfffff |
| MC MAP: TOLUD: 0x82200000 |
| MC MAP: BGSM: 0x80000000 |
| MC MAP: BDSM: 0x80200000 |
| MC MAP: TESGMB: 0x7f800000 |
| MC MAP: GGC: 0x209 |
| PCI: 00:1a.0 EHCI BAR hook registered |
| More than one caller of pci_ehci_read_resources from PCI: 00:1d.0 |
| PNP: 00ff.1 missing read_resources |
| PNP: 00ff.2 missing read_resources |
| Done reading resources. |
| skipping PNP: 00ff.2@60 fixed resource, size=0! |
| skipping PNP: 00ff.2@62 fixed resource, size=0! |
| skipping PNP: 00ff.2@64 fixed resource, size=0! |
| skipping PNP: 00ff.2@66 fixed resource, size=0! |
| Setting resources... |
| PCI: 00:01.1 1c <- [0x000000ffff - 0x000000fffe] size 0x00000000 gran 0x0c bus 01 io |
| PCI: 00:01.1 24 <- [0x00efffffff - 0x00effffffe] size 0x00000000 gran 0x14 bus 01 prefmem |
| PCI: 00:01.1 20 <- [0x00efffffff - 0x00effffffe] size 0x00000000 gran 0x14 bus 01 mem |
| PCI: 00:02.0 10 <- [0x00e0000000 - 0x00e03fffff] size 0x00400000 gran 0x16 mem64 |
| PCI: 00:02.0 18 <- [0x00d0000000 - 0x00dfffffff] size 0x10000000 gran 0x1c prefmem64 |
| PCI: 00:02.0 20 <- [0x0000001800 - 0x000000183f] size 0x00000040 gran 0x06 io |
| PCI: 00:03.0 10 <- [0x00e0638000 - 0x00e063bfff] size 0x00004000 gran 0x0e mem64 |
| PCI: 00:04.0 10 <- [0x00e0630000 - 0x00e0637fff] size 0x00008000 gran 0x0f mem64 |
| PCI: 00:14.0 10 <- [0x00e0620000 - 0x00e062ffff] size 0x00010000 gran 0x10 mem64 |
| PCI: 00:16.0 10 <- [0x00e0645000 - 0x00e064500f] size 0x00000010 gran 0x04 mem64 |
| PCI: 00:19.0 10 <- [0x00e0600000 - 0x00e061ffff] size 0x00020000 gran 0x11 mem |
| PCI: 00:19.0 14 <- [0x00e0640000 - 0x00e0640fff] size 0x00001000 gran 0x0c mem |
| PCI: 00:19.0 18 <- [0x0000001840 - 0x000000185f] size 0x00000020 gran 0x05 io |
| PCI: 00:1a.0 EHCI Debug Port hook triggered |
| PCI: 00:1a.0 10 <- [0x00e0642000 - 0x00e06423ff] size 0x00000400 gran 0x0a mem |
| PCI: 00:1a.0 10 <- [0x00e0642000 - 0x00e06423ff] size 0x00000400 gran 0x0a mem |
| PCI: 00:1a.0 EHCI Debug Port relocated |
| PCI: 00:1b.0 10 <- [0x00e063c000 - 0x00e063ffff] size 0x00004000 gran 0x0e mem64 |
| PCI: 00:1c.0 1c <- [0x000000ffff - 0x000000fffe] size 0x00000000 gran 0x0c bus 02 io |
| PCI: 00:1c.0 24 <- [0x00efffffff - 0x00effffffe] size 0x00000000 gran 0x14 bus 02 prefmem |
| PCI: 00:1c.0 20 <- [0x00e0400000 - 0x00e04fffff] size 0x00100000 gran 0x14 bus 02 mem |
| PCI: 02:00.0 10 <- [0x00e0400000 - 0x00e0400fff] size 0x00001000 gran 0x0c mem |
| PCI: 00:1c.1 1c <- [0x000000ffff - 0x000000fffe] size 0x00000000 gran 0x0c bus 03 io |
| PCI: 00:1c.1 24 <- [0x00efffffff - 0x00effffffe] size 0x00000000 gran 0x14 bus 03 prefmem |
| PCI: 00:1c.1 20 <- [0x00e0500000 - 0x00e05fffff] size 0x00100000 gran 0x14 bus 03 mem |
| PCI: 03:00.0 10 <- [0x00e0500000 - 0x00e057ffff] size 0x00080000 gran 0x13 mem64 |
| PCI: 03:00.0 30 <- [0x00e0580000 - 0x00e058ffff] size 0x00010000 gran 0x10 romem |
| PCI: 00:1d.0 10 <- [0x00e0643000 - 0x00e06433ff] size 0x00000400 gran 0x0a mem |
| PNP: 00ff.1 missing set_resources |
| PNP: 00ff.2 missing set_resources |
| PCI: 00:1f.2 10 <- [0x0000001880 - 0x0000001887] size 0x00000008 gran 0x03 io |
| PCI: 00:1f.2 14 <- [0x0000001890 - 0x0000001893] size 0x00000004 gran 0x02 io |
| PCI: 00:1f.2 18 <- [0x0000001888 - 0x000000188f] size 0x00000008 gran 0x03 io |
| PCI: 00:1f.2 1c <- [0x0000001894 - 0x0000001897] size 0x00000004 gran 0x02 io |
| PCI: 00:1f.2 20 <- [0x0000001860 - 0x000000187f] size 0x00000020 gran 0x05 io |
| PCI: 00:1f.2 24 <- [0x00e0641000 - 0x00e06417ff] size 0x00000800 gran 0x0b mem |
| PCI: 00:1f.3 10 <- [0x00e0644000 - 0x00e06440ff] size 0x00000100 gran 0x08 mem64 |
| Done setting resources. |
| Done allocating resources. |
| BS: BS_DEV_RESOURCES run times (exec / console): 2 / 0 ms |
| Timestamp - device enable: 21746609963 |
| Enabling resources... |
| PCI: 00:00.0 subsystem <- 17aa/220e |
| PCI: 00:00.0 cmd <- 06 |
| PCI: 00:01.1 bridge ctrl <- 0013 |
| PCI: 00:01.1 cmd <- 00 |
| PCI: 00:02.0 subsystem <- 17aa/220e |
| PCI: 00:02.0 cmd <- 03 |
| PCI: 00:03.0 subsystem <- 17aa/220e |
| PCI: 00:03.0 cmd <- 02 |
| PCI: 00:04.0 cmd <- 02 |
| PCI: 00:14.0 subsystem <- 17aa/220e |
| PCI: 00:14.0 cmd <- 102 |
| PCI: 00:16.0 subsystem <- 17aa/220e |
| PCI: 00:16.0 cmd <- 02 |
| PCI: 00:19.0 subsystem <- 17aa/220e |
| PCI: 00:19.0 cmd <- 103 |
| PCI: 00:1a.0 subsystem <- 17aa/220e |
| PCI: 00:1a.0 cmd <- 106 |
| PCI: 00:1b.0 subsystem <- 17aa/220e |
| PCI: 00:1b.0 cmd <- 102 |
| PCI: 00:1c.0 bridge ctrl <- 0013 |
| PCI: 00:1c.0 subsystem <- 17aa/220e |
| PCI: 00:1c.0 cmd <- 06 |
| PCI: 00:1c.1 bridge ctrl <- 0013 |
| PCI: 00:1c.1 subsystem <- 17aa/220e |
| PCI: 00:1c.1 cmd <- 06 |
| PCI: 00:1d.0 subsystem <- 17aa/220e |
| PCI: 00:1d.0 cmd <- 102 |
| PCI: 00:1f.0 subsystem <- 17aa/220e |
| PCI: 00:1f.0 cmd <- 107 |
| PCI: 00:1f.2 subsystem <- 17aa/220e |
| PCI: 00:1f.2 cmd <- 103 |
| PCI: 00:1f.3 subsystem <- 17aa/220e |
| PCI: 00:1f.3 cmd <- 103 |
| PCI: 02:00.0 cmd <- 02 |
| PCI: 03:00.0 cmd <- 02 |
| done. |
| Found TPM ST33ZP24 by ST Microelectronics |
| TPM: Startup |
| TPM: command 0x99 returned 0x0 |
| TPM: Asserting physical presence |
| TPM: command 0x4000000a returned 0x0 |
| TPM: command 0x65 returned 0x0 |
| TPM: flags disable=0, deactivated=0, nvlocked=1 |
| TPM: setup succeeded |
| BS: BS_DEV_INIT entry times (exec / console): 64 / 0 ms |
| Timestamp - device initialization: 21913902296 |
| Initializing devices... |
| Root Device init |
| Root Device init finished in 0 msecs |
| CPU_CLUSTER: 0 init |
| MTRR: Physical address space: |
| 0x0000000000000000 - 0x00000000000a0000 size 0x000a0000 type 6 |
| 0x00000000000a0000 - 0x00000000000c0000 size 0x00020000 type 0 |
| 0x00000000000c0000 - 0x0000000080000000 size 0x7ff40000 type 6 |
| 0x0000000080000000 - 0x00000000d0000000 size 0x50000000 type 0 |
| 0x00000000d0000000 - 0x00000000e0000000 size 0x10000000 type 1 |
| 0x00000000e0000000 - 0x0000000100000000 size 0x20000000 type 0 |
| 0x0000000100000000 - 0x000000027de00000 size 0x17de00000 type 6 |
| MTRR: Fixed MSR 0x250 0x0606060606060606 |
| MTRR: Fixed MSR 0x258 0x0606060606060606 |
| MTRR: Fixed MSR 0x259 0x0000000000000000 |
| MTRR: Fixed MSR 0x268 0x0606060606060606 |
| MTRR: Fixed MSR 0x269 0x0606060606060606 |
| MTRR: Fixed MSR 0x26a 0x0606060606060606 |
| MTRR: Fixed MSR 0x26b 0x0606060606060606 |
| MTRR: Fixed MSR 0x26c 0x0606060606060606 |
| MTRR: Fixed MSR 0x26d 0x0606060606060606 |
| MTRR: Fixed MSR 0x26e 0x0606060606060606 |
| MTRR: Fixed MSR 0x26f 0x0606060606060606 |
| CPU physical address size: 39 bits |
| MTRR: default type WB/UC MTRR counts: 4/4. |
| MTRR: UC selected as default type. |
| MTRR: 0 base 0x0000000000000000 mask 0x0000007f80000000 type 6 |
| MTRR: 1 base 0x00000000d0000000 mask 0x0000007ff0000000 type 1 |
| MTRR: 2 base 0x0000000100000000 mask 0x0000007f00000000 type 6 |
| MTRR: 3 base 0x0000000200000000 mask 0x0000007f80000000 type 6 |
| |
| MTRR check |
| Fixed MTRRs : Enabled |
| Variable MTRRs: Enabled |
| |
| Initializing VR config. |
| CPU has 2 cores, 4 threads enabled. |
| Setting up SMI for CPU |
| Will perform SMM setup. |
| FMAP: area COREBOOT found @ b10200 (982528 bytes) |
| CBFS: Locating 'cpu_microcode_blob.bin' |
| CBFS: Found @ offset 8ec0 size b000 |
| microcode: sig=0x306c3 pf=0x10 revision=0x27 |
| CPU: Intel(R) Core(TM) i5-4300M CPU @ 2.60GHz. |
| Loading module at 0x00030000 with entry 0x00030000. filesize: 0x170 memsize: 0x170 |
| Processing 16 relocs. Offset value of 0x00030000 |
| Attempting to start 3 APs |
| Waiting for 10ms after sending INIT. |
| Waiting for 1st SIPI to complete...done. |
| Waiting for 2nd SIPI to complete...AP: slot 1 apic_id 1. |
| done. |
| AP: slot 2 apic_id 2. |
| AP: slot 3 apic_id 3. |
| Loading module at 0x00038000 with entry 0x00038000. filesize: 0x1b8 memsize: 0x1b8 |
| Processing 13 relocs. Offset value of 0x00038000 |
| SMM Module: stub loaded at 0x00038000. Will call 0x7f7a1835(0x00000000) |
| Installing SMM handler to 0x7f800000 |
| Loading module at 0x7f810000 with entry 0x7f8105b4. filesize: 0x1d90 memsize: 0x5de8 |
| Processing 97 relocs. Offset value of 0x7f810000 |
| Loading module at 0x7f808000 with entry 0x7f808000. filesize: 0x1b8 memsize: 0x1b8 |
| Processing 13 relocs. Offset value of 0x7f808000 |
| SMM Module: placing jmp sequence at 0x7f807c00 rel16 0x03fd |
| SMM Module: placing jmp sequence at 0x7f807800 rel16 0x07fd |
| SMM Module: placing jmp sequence at 0x7f807400 rel16 0x0bfd |
| SMM Module: stub loaded at 0x7f808000. Will call 0x7f8105b4(0x00000000) |
| Initializing Southbridge SMI... |
| SMI_STS: MCSMI PM1 |
| WAK PWRBTN BM TMROF New SMBASE 0x7f800000 |
| In relocation handler: cpu 0 |
| New SMBASE=0x7f800000 IEDBASE=0x7fc00000 |
| Writing SMRR. base = 0x7f800006, mask=0xff800800 |
| Relocation complete. |
| microcode: Update skipped, already up-to-date |
| New SMBASE 0x7f7ffc00 |
| In relocation handler: cpu 1 |
| New SMBASE=0x7f7ffc00 IEDBASE=0x7fc00000 |
| Writing SMRR. base = 0x7f800006, mask=0xff800800 |
| Relocation complete. |
| microcode: Update skipped, already up-to-date |
| New SMBASE 0x7f7ff800 |
| In relocation handler: cpu 2 |
| New SMBASE=0x7f7ff800 IEDBASE=0x7fc00000 |
| Writing SMRR. base = 0x7f800006, mask=0xff800800 |
| Relocation complete. |
| microcode: Update skipped, already up-to-date |
| New SMBASE 0x7f7ff400 |
| In relocation handler: cpu 3 |
| New SMBASE=0x7f7ff400 IEDBASE=0x7fc00000 |
| Writing SMRR. base = 0x7f800006, mask=0xff800800 |
| Relocation complete. |
| microcode: Update skipped, already up-to-date |
| Initializing CPU #0 |
| CPU: vendor Intel device 306c3 |
| CPU: family 06, model 3c, stepping 03 |
| Setting up local APIC... |
| apic_id: 0x00 done. |
| VMX status: enabled |
| IA32_FEATURE_CONTROL status: locked |
| haswell: energy policy set to 6 |
| haswell: frequency set to 2600 |
| Turbo is available but hidden |
| Turbo is available and visible |
| CPU #0 initialized |
| Initializing CPU #1 |
| Initializing CPU #2 |
| Initializing CPU #3 |
| CPU: vendor Intel device 306c3 |
| CPU: family 06, model 3c, stepping 03 |
| CPU: vendor Intel device 306c3 |
| CPU: family 06, model 3c, stepping 03 |
| Setting up local APIC... |
| CPU: vendor Intel device 306c3 |
| CPU: family 06, model 3c, stepping 03 |
| Setting up local APIC... |
| apic_id: 0x02 done. |
| Setting up local APIC... |
| VMX status: enabled |
| apic_id: 0x03 done. |
| IA32_FEATURE_CONTROL status: locked |
| VMX status: enabled |
| apic_id: 0x01 done. |
| IA32_FEATURE_CONTROL status: locked |
| VMX status: enabled |
| IA32_FEATURE_CONTROL status: locked |
| haswell: energy policy set to 6 |
| haswell: frequency set to 2600 |
| haswell: energy policy set to 6 |
| CPU #2 initialized |
| haswell: energy policy set to 6 |
| haswell: frequency set to 2600 |
| CPU #3 initialized |
| haswell: frequency set to 2600 |
| CPU #1 initialized |
| bsp_do_flight_plan done after 1 msecs. |
| Enabling SMIs. |
| Locking SMM. |
| CPU_CLUSTER: 0 init finished in 16 msecs |
| PCI: 00:00.0 init |
| Disabling PEG12. |
| Disabling PEG10. |
| Disabling "device 7". |
| Set BIOS_RESET_CPL |
| CPU TDP: 37 Watts |
| PCI: 00:00.0 init finished in 1 msecs |
| PCI: 00:01.1 init |
| PCI: 00:01.1 init finished in 0 msecs |
| PCI: 00:02.0 init |
| GT Power Management Init |
| GT Power Management Init (post VBIOS) |
| |
| [0.300497] CONFIG => |
| [0.300499] (Primary => |
| [0.300499] (Port => eDP , |
| [0.300500] Framebuffer => |
| [0.300500] (Width => 1920, |
| [0.300501] Height => 1080, |
| [0.300502] Start_X => 0, |
| [0.300502] Start_Y => 0, |
| [0.300503] Stride => 1920, |
| [0.300504] V_Stride => 1080, |
| [0.300505] Tiling => Linear , |
| [0.300506] Rotation => No_Rotation, |
| [0.300507] Offset => 0x00000000, |
| [0.300508] BPC => 8), |
| [0.300508] Mode => |
| [0.300509] (Dotclock => 140100000, |
| [0.300510] H_Visible => 1920, |
| [0.300511] H_Sync_Begin => 1980, |
| [0.300512] H_Sync_End => 2016, |
| [0.300513] H_Total => 2092, |
| [0.300514] V_Visible => 1080, |
| [0.300515] V_Sync_Begin => 1083, |
| [0.300516] V_Sync_End => 1088, |
| [0.300517] V_Total => 1116, |
| [0.300518] H_Sync_Active_High => True, |
| [0.300519] V_Sync_Active_High => False, |
| [0.300520] BPC => 6)), |
| [0.300521] Secondary => |
| [0.300521] (Port => Disabled, |
| [0.300522] Framebuffer => |
| [0.300522] (Width => 1, |
| [0.300523] Height => 1, |
| [0.300523] Start_X => 0, |
| [0.300524] Start_Y => 0, |
| [0.300524] Stride => 1, |
| [0.300525] V_Stride => 1, |
| [0.300525] Tiling => Linear , |
| [0.300526] Rotation => No_Rotation, |
| [0.300527] Offset => 0x00000000, |
| [0.300528] BPC => 8), |
| [0.300528] Mode => |
| [0.300529] (Dotclock => 1000000, |
| [0.300530] H_Visible => 1, |
| [0.300531] H_Sync_Begin => 1, |
| [0.300532] H_Sync_End => 1, |
| [0.300533] H_Total => 1, |
| [0.300534] V_Visible => 1, |
| [0.300535] V_Sync_Begin => 1, |
| [0.300536] V_Sync_End => 1, |
| [0.300537] V_Total => 1, |
| [0.300538] H_Sync_Active_High => False, |
| [0.300539] V_Sync_Active_High => False, |
| [0.300540] BPC => 5)), |
| [0.300541] Tertiary => |
| [0.300541] (Port => Disabled, |
| [0.300542] Framebuffer => |
| [0.300542] (Width => 1, |
| [0.300543] Height => 1, |
| [0.300543] Start_X => 0, |
| [0.300544] Start_Y => 0, |
| [0.300544] Stride => 1, |
| [0.300545] V_Stride => 1, |
| [0.300545] Tiling => Linear , |
| [0.300546] Rotation => No_Rotation, |
| [0.300547] Offset => 0x00000000, |
| [0.300548] BPC => 8), |
| [0.300548] Mode => |
| [0.300549] (Dotclock => 1000000, |
| [0.300550] H_Visible => 1, |
| [0.300551] H_Sync_Begin => 1, |
| [0.300552] H_Sync_End => 1, |
| [0.300553] H_Total => 1, |
| [0.300554] V_Visible => 1, |
| [0.300555] V_Sync_Begin => 1, |
| [0.300556] V_Sync_End => 1, |
| [0.300557] V_Total => 1, |
| [0.300558] H_Sync_Active_High => False, |
| [0.300559] V_Sync_Active_High => False, |
| [0.300560] BPC => 5))); |
| PCI: 00:02.0 init finished in 206 msecs |
| PCI: 00:03.0 init |
| Mini-HD: base = 0xe0638000 |
| HDA: No codec! |
| PCI: 00:03.0 init finished in 51 msecs |
| PCI: 00:04.0 init |
| PCI: 00:04.0 init finished in 0 msecs |
| PCI: 00:14.0 init |
| IOBP: set 0xe5004001 to 0x000000ce |
| PCI: 00:14.0 init finished in 0 msecs |
| PCI: 00:16.0 init |
| ME: FW Partition Table : OK |
| ME: Bringup Loader Failure : NO |
| ME: Firmware Init Complete : NO |
| ME: Manufacturing Mode : YES |
| ME: Boot Options Present : NO |
| ME: Update In Progress : NO |
| ME: Current Working State : Initializing |
| ME: Current Operation State : Bring up |
| ME: Current Operation Mode : Debug |
| ME: Error Code : No Error |
| ME: Progress Phase : BUP Phase |
| ME: Power Management Event : Clean Moff->Mx wake |
| ME: Progress Phase State : 0x4d |
| intel_me_path: mbp is not ready! |
| ME: BIOS path: Error |
| ME: MBP not ready |
| PCI: 00:16.0 init finished in 0 msecs |
| PCI: 00:19.0 init |
| PCI: 00:19.0 init finished in 0 msecs |
| PCI: 00:1a.0 init |
| EHCI: Setting up controller.. IOBP: set 0xe5004001 to 0x000000ce |
| done. |
| PCI: 00:1a.0 init finished in 0 msecs |
| PCI: 00:1b.0 init |
| Azalia: base = 0xe063c000 |
| Azalia: codec_mask = 01 |
| HDA: Initializing codec #0 |
| HDA: codec viddid: 10ec0292 |
| HDA: verb loaded. |
| PCI: 00:1b.0 init finished in 3 msecs |
| PCI: 00:1c.0 init |
| Initializing PCH PCIe bridge. |
| PCI: 00:1c.0 init finished in 0 msecs |
| PCI: 00:1c.1 init |
| Initializing PCH PCIe bridge. |
| PCI: 00:1c.1 init finished in 0 msecs |
| PCI: 00:1d.0 init |
| EHCI: Setting up controller.. IOBP: set 0xe5004001 to 0x000000ce |
| done. |
| PCI: 00:1d.0 init finished in 0 msecs |
| PCI: 00:1f.0 init |
| pch: lpc_init |
| IOAPIC: Initializing IOAPIC at 0xfec00000 |
| IOAPIC: Bootstrap Processor Local APIC = 0x00 |
| IOAPIC: ID = 0x02 |
| Set power off after power failure. |
| NMI sources enabled. |
| LynxPoint PM init |
| RTC: failed = 0x0 |
| RTC Init |
| Disabling ACPI via APMC: |
| done. |
| PCI: 00:1f.0 init finished in 0 msecs |
| PCI: 00:1f.2 init |
| SATA: Initializing... |
| SATA: Controller in AHCI mode. |
| ABAR: 0xe0641000 |
| PCI: 00:1f.2 init finished in 0 msecs |
| PCI: 00:1f.3 init |
| PCI: 00:1f.3 init finished in 0 msecs |
| PCI: 02:00.0 init |
| PCI: 02:00.0 init finished in 0 msecs |
| PCI: 03:00.0 init |
| PCI: 03:00.0 init finished in 0 msecs |
| PNP: 00ff.2 init |
| PNP: 00ff.2 init finished in 0 msecs |
| Devices initialized |
| BS: BS_DEV_INIT run times (exec / console): 277 / 1 ms |
| Finalize devices... |
| PCI: 00:1f.0 final |
| Devices finalized |
| Timestamp - device setup done: 22646439283 |
| Timestamp - cbmem post: 22646444879 |
| Timestamp - write tables: 22646448711 |
| FMAP: area COREBOOT found @ b10200 (982528 bytes) |
| CBFS: Locating 'fallback/dsdt.aml' |
| CBFS: Found @ offset 3ddc0 size 3833 |
| FMAP: area COREBOOT found @ b10200 (982528 bytes) |
| CBFS: Locating 'fallback/slic' |
| CBFS: 'fallback/slic' not found. |
| ACPI: Writing ACPI tables at 7f744000. |
| ACPI: * FACS |
| ACPI: * DSDT |
| ACPI: * FADT |
| ACPI: added table 1/32, length now 40 |
| ACPI: * SSDT |
| Found 1 CPU(s) with 4 core(s) each. |
| PSS: 2601MHz power 37000 control 0x2100 status 0x2100 |
| PSS: 2600MHz power 37000 control 0x1a00 status 0x1a00 |
| PSS: 2000MHz power 26518 control 0x1400 status 0x1400 |
| PSS: 1600MHz power 20229 control 0x1000 status 0x1000 |
| PSS: 1200MHz power 14447 control 0xc00 status 0xc00 |
| PSS: 800MHz power 9143 control 0x800 status 0x800 |
| PSS: 2601MHz power 37000 control 0x2100 status 0x2100 |
| PSS: 2600MHz power 37000 control 0x1a00 status 0x1a00 |
| PSS: 2000MHz power 26518 control 0x1400 status 0x1400 |
| PSS: 1600MHz power 20229 control 0x1000 status 0x1000 |
| PSS: 1200MHz power 14447 control 0xc00 status 0xc00 |
| PSS: 800MHz power 9143 control 0x800 status 0x800 |
| PSS: 2601MHz power 37000 control 0x2100 status 0x2100 |
| PSS: 2600MHz power 37000 control 0x1a00 status 0x1a00 |
| PSS: 2000MHz power 26518 control 0x1400 status 0x1400 |
| PSS: 1600MHz power 20229 control 0x1000 status 0x1000 |
| PSS: 1200MHz power 14447 control 0xc00 status 0xc00 |
| PSS: 800MHz power 9143 control 0x800 status 0x800 |
| PSS: 2601MHz power 37000 control 0x2100 status 0x2100 |
| PSS: 2600MHz power 37000 control 0x1a00 status 0x1a00 |
| PSS: 2000MHz power 26518 control 0x1400 status 0x1400 |
| PSS: 1600MHz power 20229 control 0x1000 status 0x1000 |
| PSS: 1200MHz power 14447 control 0xc00 status 0xc00 |
| PSS: 800MHz power 9143 control 0x800 status 0x800 |
| Generating ACPI PIRQ entries |
| ACPI: * H8 |
| H8: BDC detection not implemented. Assuming BDC installed |
| H8: WWAN detection not implemented. Assuming WWAN installed |
| \_SB.PCI0.LPCB.TPM.TPM: LPC TPM PNP: 0c31.0 |
| ACPI: added table 2/32, length now 44 |
| ACPI: * MCFG |
| ACPI: added table 3/32, length now 48 |
| ACPI: * TCPA |
| TCPA log created at 0x7f734000 |
| ACPI: added table 4/32, length now 52 |
| ACPI: * MADT |
| ACPI: added table 5/32, length now 56 |
| current = 7f7496d0 |
| ACPI: * DMAR |
| ACPI: added table 6/32, length now 60 |
| FMAP: area COREBOOT found @ b10200 (982528 bytes) |
| CBFS: Locating 'vbt.bin' |
| CBFS: Found @ offset 37300 size 598 |
| Timestamp - starting LZMA decompress (ignore for x86): 22656570755 |
| Timestamp - finished LZMA decompress (ignore for x86): 22657772043 |
| Found a VBT of 4608 bytes after decompression |
| GMA: Found VBT in CBFS |
| GMA: Found valid VBT in CBFS |
| ACPI: * HPET |
| ACPI: added table 7/32, length now 64 |
| ACPI: * SSDT2 |
| ACPI: added table 8/32, length now 68 |
| current = 7f74b810 |
| ACPI: done. |
| ACPI tables: 30736 bytes. |
| smbios_write_tables: 7f733000 |
| Create SMBIOS type 17 |
| SMBIOS tables: 878 bytes. |
| Writing table forward entry at 0x00000500 |
| Wrote coreboot table at: 0x00000500, 0x10 bytes, checksum 68 |
| Writing coreboot table at 0x7f768000 |
| FMAP: area COREBOOT found @ b10200 (982528 bytes) |
| CBFS: Locating 'cmos_layout.bin' |
| CBFS: Found @ offset 37a40 size 574 |
| 0. 0000000000000000-0000000000000fff: CONFIGURATION TABLES |
| 1. 0000000000001000-000000000009ffff: RAM |
| 2. 00000000000a0000-00000000000fffff: RESERVED |
| 3. 0000000000100000-000000007f732fff: RAM |
| 4. 000000007f733000-000000007f781fff: CONFIGURATION TABLES |
| 5. 000000007f782000-000000007f7cffff: RAMSTAGE |
| 6. 000000007f7d0000-000000007f7fffff: CONFIGURATION TABLES |
| 7. 000000007f800000-00000000821fffff: RESERVED |
| 8. 00000000f0000000-00000000f3ffffff: RESERVED |
| 9. 00000000fed10000-00000000fed19fff: RESERVED |
| 10. 00000000fed40000-00000000fed44fff: RESERVED |
| 11. 00000000fed84000-00000000fed84fff: RESERVED |
| 12. 00000000fed90000-00000000fed91fff: RESERVED |
| 13. 0000000100000000-000000027ddfffff: RAM |
| FMAP: area COREBOOT found @ b10200 (982528 bytes) |
| Wrote coreboot table at: 0x7f768000, 0x96c bytes, checksum caec |
| coreboot table: 2436 bytes. |
| IMD ROOT 0. 0x7f7ff000 0x00001000 |
| IMD SMALL 1. 0x7f7fe000 0x00001000 |
| CONSOLE 2. 0x7f7de000 0x00020000 |
| TIME STAMP 3. 0x7f7dd000 0x00000910 |
| MRC DATA 4. 0x7f7dc000 0x00000fe4 |
| ROMSTG STCK 5. 0x7f7db000 0x00001000 |
| AFTER CAR 6. 0x7f7d0000 0x0000b000 |
| RAMSTAGE 7. 0x7f781000 0x0004f000 |
| ACPI GNVS 8. 0x7f780000 0x00001000 |
| SMM BACKUP 9. 0x7f770000 0x00010000 |
| COREBOOT 10. 0x7f768000 0x00008000 |
| ACPI 11. 0x7f744000 0x00024000 |
| TCPA TCGLOG12. 0x7f734000 0x00010000 |
| SMBIOS 13. 0x7f733000 0x00000800 |
| IMD small region: |
| IMD ROOT 0. 0x7f7fec00 0x00000400 |
| USBDEBUG 1. 0x7f7feba0 0x00000050 |
| FMAP 2. 0x7f7feac0 0x000000e0 |
| MEM INFO 3. 0x7f7fe900 0x000001b9 |
| ROMSTAGE 4. 0x7f7fe8e0 0x00000004 |
| Timestamp - finalize chips: 22660919951 |
| BS: BS_WRITE_TABLES run times (exec / console): 6 / 0 ms |
| Timestamp - load payload: 22660929415 |
| FMAP: area COREBOOT found @ b10200 (982528 bytes) |
| CBFS: Locating 'fallback/payload' |
| CBFS: Found @ offset 41640 size 10c1b |
| Checking segment from ROM address 0xfff51878 |
| Payload being loaded at below 1MiB without region being marked as RAM usable. |
| Checking segment from ROM address 0xfff51894 |
| Loading segment from ROM address 0xfff51878 |
| code (compression=1) |
| New segment dstaddr 0x000e0280 memsize 0x1fd80 srcaddr 0xfff518b0 filesize 0x10be3 |
| Loading Segment: addr: 0x000e0280 memsz: 0x000000000001fd80 filesz: 0x0000000000010be3 |
| using LZMA |
| Timestamp - starting LZMA decompress (ignore for x86): 22661386551 |
| Timestamp - finished LZMA decompress (ignore for x86): 22718947299 |
| Loading segment from ROM address 0xfff51894 |
| Entry Point 0x000fd25e |
| BS: BS_PAYLOAD_LOAD run times (exec / console): 22 / 0 ms |
| ICH-NM10-PCH: watchdog disabled |
| Jumping to boot code at 0x000fd25e(0x7f768000) |
| Timestamp - selfboot jump: 22719046723 |
| SeaBIOS (version rel-1.13.0-0-gf21b5a4) |
| BUILD: gcc: (coreboot toolchain va87a741b41 2019-12-19) 8.3.0 binutils: (GNU Binutils) 2.33.1 |
| Found coreboot cbmem console @ 7f7de000 |
| Found mainboard LENOVO ThinkPad T440p |
| Relocating init from 0x000e1960 to 0x7f6e5d60 (size 53760) |
| Found CBFS header at 0xfff10238 |
| multiboot: eax=7f7b9b00, ebx=7f7b9ac4 |
| Found 20 PCI devices (max PCI bus is 03) |
| Copying SMBIOS entry point from 0x7f733000 to 0x000f6780 |
| Copying ACPI RSDP from 0x7f744000 to 0x000f6750 |
| Using pmtimer, ioport 0x508 |
| Scan for VGA option rom |
| Running option rom at c000:0003 |
| pmm call arg1=0 |
| Turning on vga text mode console |
| SeaBIOS (version rel-1.13.0-0-gf21b5a4) |
| XHCI init on dev 00:14.0: regs @ 0xe0620000, 21 ports, 32 slots, 32 byte contexts |
| XHCI protocol USB 2.00, 15 ports (offset 1), def 3001 |
| XHCI protocol USB 3.00, 6 ports (offset 16), def 1000 |
| XHCI extcap 0xc1 @ 0xe0628040 |
| XHCI extcap 0xc0 @ 0xe0628070 |
| XHCI extcap 0x1 @ 0xe062846c |
| EHCI init on dev 00:1a.0 (regs=0xe0642020) |
| EHCI init on dev 00:1d.0 (regs=0xe0643020) |
| AHCI controller at 00:1f.2, iobase 0xe0641000, irq 10 |
| Found 0 lpt ports |
| Found 0 serial ports |
| Discarding ps2 data aa (status=11) |
| Searching bootorder for: /pci@i0cf8/*@1f,2/drive@5/disk@0 |
| Searching bios-geometry for: /pci@i0cf8/*@1f,2/drive@5/disk@0 |
| AHCI/5: registering: "DVD/CD [AHCI/5: MATSHITADVD-RAM UJ8E2 ATAPI-8 DVD/CD]" |
| Searching bootorder for: /pci@i0cf8/*@1f,2/drive@0/disk@0 |
| AHCI/0: Set transfer mode to UDMA-6 |
| Searching bios-geometry for: /pci@i0cf8/*@1f,2/drive@0/disk@0 |
| AHCI/0: registering: "AHCI/0: Crucial_CT1024MX200SSD1 ATA-10 Hard-Disk (931 GiBytes)" |
| XHCI no devices found |
| Initialized USB HUB (0 ports used) |
| Initialized USB HUB (0 ports used) |
| PS2 keyboard initialized |
| All threads complete. |
| Scan for option roms |
| |
| Press ESC for boot menu. |
| |
| Searching bootorder for: HALT |
| drive 0x000f6690: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 s=1953525168 |
| Space available for UMB: c7000-ed800, f5fa0-f6660 |
| Returned 180224 bytes of ZoneHigh |
| e820 map has 11 items: |
| 0: 0000000000000000 - 000000000009fc00 = 1 RAM |
| 1: 000000000009fc00 - 00000000000a0000 = 2 RESERVED |
| 2: 00000000000f0000 - 0000000000100000 = 2 RESERVED |
| 3: 0000000000100000 - 000000007f71f000 = 1 RAM |
| 4: 000000007f71f000 - 0000000082200000 = 2 RESERVED |
| 5: 00000000f0000000 - 00000000f4000000 = 2 RESERVED |
| 6: 00000000fed10000 - 00000000fed1a000 = 2 RESERVED |
| 7: 00000000fed40000 - 00000000fed45000 = 2 RESERVED |
| 8: 00000000fed84000 - 00000000fed85000 = 2 RESERVED |
| 9: 00000000fed90000 - 00000000fed92000 = 2 RESERVED |
| 10: 0000000100000000 - 000000027de00000 = 1 RAM |
| enter handle_19: |
| NULL |
| Booting from DVD/CD... |
| Device reports MEDIUM NOT PRESENT |
| scsi_is_ready returned -1 |
| Boot failed: Could not read from CDROM (code 0003) |
| enter handle_18: |
| NULL |
| Booting from Hard Disk... |
| Booting from 0000:7c00 |
| |