blob: 037d94e2d2a73bc3467e3ec7692adbaf9f858ce6 [file] [log] [blame]
[ 0.000000] Linux version 4.19.80-2-lts (linux-lts@archlinux) (gcc version 9.2.0 (GCC)) #1 SMP @1572016702
[ 0.000000] Command line: BOOT_IMAGE=../vmlinuz-linux-lts root=/dev/sda2 rw rootflags=subvol=arch initrd=../initramfs-linux-lts.img
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007f71dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007f71e000-0x00000000821fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed84000-0x00000000fed84fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000047ddfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: LENOVO ThinkPad T440p/ThinkPad T440p, BIOS 4.10-1253-g5331a7cff9 10/30/2019
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2693.811 MHz processor
[ 0.000996] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000998] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.001002] last_pfn = 0x47de00 max_arch_pfn = 0x400000000
[ 0.001006] MTRR default type: write-back
[ 0.001006] MTRR fixed ranges enabled:
[ 0.001007] 00000-9FFFF write-back
[ 0.001008] A0000-BFFFF uncachable
[ 0.001009] C0000-FFFFF write-back
[ 0.001009] MTRR variable ranges enabled:
[ 0.001010] 0 base 0080000000 mask 7FC0000000 uncachable
[ 0.001011] 1 base 00C0000000 mask 7FF0000000 uncachable
[ 0.001012] 2 base 00D0000000 mask 7FF0000000 write-combining
[ 0.001013] 3 base 00E0000000 mask 7FE0000000 uncachable
[ 0.001013] 4 disabled
[ 0.001013] 5 disabled
[ 0.001014] 6 disabled
[ 0.001014] 7 disabled
[ 0.001014] 8 disabled
[ 0.001015] 9 disabled
[ 0.001834] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.001952] last_pfn = 0x7f71e max_arch_pfn = 0x400000000
[ 0.009532] Scanning 1 areas for low memory corruption
[ 0.009535] Using GB pages for direct mapping
[ 0.009537] BRK [0x340e01000, 0x340e01fff] PGTABLE
[ 0.009538] BRK [0x340e02000, 0x340e02fff] PGTABLE
[ 0.009539] BRK [0x340e03000, 0x340e03fff] PGTABLE
[ 0.009564] BRK [0x340e04000, 0x340e04fff] PGTABLE
[ 0.009566] BRK [0x340e05000, 0x340e05fff] PGTABLE
[ 0.009640] BRK [0x340e06000, 0x340e06fff] PGTABLE
[ 0.009660] BRK [0x340e07000, 0x340e07fff] PGTABLE
[ 0.009694] RAMDISK: [mem 0x7ee2a000-0x7f71dfff]
[ 0.009698] ACPI: Early table checksum verification disabled
[ 0.009748] ACPI: RSDP 0x00000000000F6770 000024 (v02 COREv4)
[ 0.009751] ACPI: XSDT 0x000000007F7430E0 000064 (v01 COREv4 COREBOOT 00000000 CORE 20190703)
[ 0.009756] ACPI: FACP 0x000000007F7468C0 0000F4 (v04 COREv4 COREBOOT 00000000 CORE 20190703)
[ 0.009761] ACPI: DSDT 0x000000007F743280 00363A (v02 COREv4 COREBOOT 20141018 INTL 20190703)
[ 0.009764] ACPI: FACS 0x000000007F743240 000040
[ 0.009766] ACPI: FACS 0x000000007F743240 000040
[ 0.009768] ACPI: SSDT 0x000000007F7469C0 002D22 (v02 COREv4 COREBOOT 0000002A CORE 20190703)
[ 0.009770] ACPI: MCFG 0x000000007F7496F0 00003C (v01 COREv4 COREBOOT 00000000 CORE 20190703)
[ 0.009773] ACPI: TCPA 0x000000007F749730 000032 (v02 COREv4 COREBOOT 00000000 CORE 20190703)
[ 0.009775] ACPI: APIC 0x000000007F749770 00008C (v02 COREv4 COREBOOT 00000000 CORE 20190703)
[ 0.009777] ACPI: DMAR 0x000000007F749800 0000A0 (v01 COREv4 COREBOOT 00000000 CORE 20190703)
[ 0.009780] ACPI: HPET 0x000000007F74B8A0 000038 (v01 COREv4 COREBOOT 00000000 CORE 00000000)
[ 0.009782] ACPI: SSDT 0x000000007F74B8E0 00005C (v02 COREv4 SERIALIO 0000002B CORE 20190703)
[ 0.009789] ACPI: Local APIC address 0xfee00000
[ 0.009873] No NUMA configuration found
[ 0.009874] Faking a node at [mem 0x0000000000000000-0x000000047ddfffff]
[ 0.009877] NODE_DATA(0) allocated [mem 0x47ddfc000-0x47ddfffff]
[ 0.009897] Zone ranges:
[ 0.009898] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.009899] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.009900] Normal [mem 0x0000000100000000-0x000000047ddfffff]
[ 0.009901] Device empty
[ 0.009902] Movable zone start for each node
[ 0.009902] Early memory node ranges
[ 0.009903] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.009904] node 0: [mem 0x0000000000100000-0x000000007f71dfff]
[ 0.009904] node 0: [mem 0x0000000100000000-0x000000047ddfffff]
[ 0.009907] Reserved but unavailable: 98 pages
[ 0.009908] Initmem setup node 0 [mem 0x0000000000001000-0x000000047ddfffff]
[ 0.009909] On node 0 totalpages: 4183228
[ 0.009910] DMA zone: 64 pages used for memmap
[ 0.009910] DMA zone: 21 pages reserved
[ 0.009911] DMA zone: 3998 pages, LIFO batch:0
[ 0.009985] DMA32 zone: 8093 pages used for memmap
[ 0.009986] DMA32 zone: 517918 pages, LIFO batch:63
[ 0.020194] Normal zone: 57208 pages used for memmap
[ 0.020195] Normal zone: 3661312 pages, LIFO batch:63
[ 0.084349] Reserving Intel graphics memory at [mem 0x80200000-0x821fffff]
[ 0.084563] ACPI: PM-Timer IO Port: 0x508
[ 0.084565] ACPI: Local APIC address 0xfee00000
[ 0.084581] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.084583] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.084584] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.084585] ACPI: IRQ0 used by override.
[ 0.084586] ACPI: IRQ9 used by override.
[ 0.084588] Using ACPI (MADT) for SMP configuration information
[ 0.084589] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.084593] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.084602] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.084603] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.084603] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.084604] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.084605] PM: Registered nosave memory: [mem 0x7f71e000-0x821fffff]
[ 0.084605] PM: Registered nosave memory: [mem 0x82200000-0xefffffff]
[ 0.084606] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
[ 0.084606] PM: Registered nosave memory: [mem 0xf4000000-0xfed0ffff]
[ 0.084606] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[ 0.084607] PM: Registered nosave memory: [mem 0xfed1a000-0xfed3ffff]
[ 0.084607] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[ 0.084608] PM: Registered nosave memory: [mem 0xfed45000-0xfed83fff]
[ 0.084608] PM: Registered nosave memory: [mem 0xfed84000-0xfed84fff]
[ 0.084609] PM: Registered nosave memory: [mem 0xfed85000-0xfed8ffff]
[ 0.084609] PM: Registered nosave memory: [mem 0xfed90000-0xfed91fff]
[ 0.084609] PM: Registered nosave memory: [mem 0xfed92000-0xffffffff]
[ 0.084611] [mem 0x82200000-0xefffffff] available for PCI devices
[ 0.084612] Booting paravirtualized kernel on bare hardware
[ 0.084614] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.184257] random: get_random_bytes called from start_kernel+0x93/0x530 with crng_init=0
[ 0.184262] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:8 nr_node_ids:1
[ 0.184430] percpu: Embedded 45 pages/cpu s147456 r8192 d28672 u262144
[ 0.184435] pcpu-alloc: s147456 r8192 d28672 u262144 alloc=1*2097152
[ 0.184436] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.184450] Built 1 zonelists, mobility grouping on. Total pages: 4117842
[ 0.184451] Policy zone: Normal
[ 0.184452] Kernel command line: BOOT_IMAGE=../vmlinuz-linux-lts root=/dev/sda2 rw rootflags=subvol=arch initrd=../initramfs-linux-lts.img
[ 0.187764] Calgary: detecting Calgary via BIOS EBDA area
[ 0.187770] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.228053] Memory: 16365292K/16732912K available (12300K kernel code, 1362K rwdata, 3564K rodata, 1600K init, 3788K bss, 367620K reserved, 0K cma-reserved)
[ 0.228134] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.228139] Kernel/User page tables isolation: enabled
[ 0.236193] ftrace: allocating 36065 entries in 141 pages
[ 0.249050] rcu: Hierarchical RCU implementation.
[ 0.249051] rcu: RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8.
[ 0.249051] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.250348] NR_IRQS: 20736, nr_irqs: 488, preallocated irqs: 16
[ 0.250826] Console: colour dummy device 80x25
[ 0.250830] console [tty0] enabled
[ 0.250844] ACPI: Core revision 20180810
[ 0.250983] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.250992] hpet clockevent registered
[ 0.250995] APIC: Switch to symmetric I/O mode setup
[ 0.250997] DMAR: Host address width 39
[ 0.250998] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.251001] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
[ 0.251002] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.251004] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da
[ 0.251006] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.251006] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.251007] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.251439] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.251440] x2apic enabled
[ 0.251446] Switched APIC routing to cluster x2apic.
[ 0.251919] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.300995] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x26d467e3d94, max_idle_ns: 440795288097 ns
[ 0.301006] Calibrating delay loop (skipped), value calculated using timer frequency.. 5387.62 BogoMIPS (lpj=26938110)
[ 0.301008] pid_max: default: 32768 minimum: 301
[ 0.301032] Security Framework initialized
[ 0.301032] Yama: becoming mindful.
[ 0.301037] AppArmor: AppArmor disabled by boot time parameter
[ 0.303183] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.304261] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.304302] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.304335] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.304524] CPU0: Thermal monitoring enabled (TM1)
[ 0.304537] process: using mwait in idle threads
[ 0.304540] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[ 0.304540] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.304541] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.304542] Spectre V2 : Mitigation: Full generic retpoline
[ 0.304543] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.304543] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.304549] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.304550] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[ 0.304551] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.304572] MDS: Mitigation: Clear CPU buffers
[ 0.308482] Freeing SMP alternatives memory: 28K
[ 0.310232] TSC deadline timer enabled
[ 0.310235] smpboot: CPU0: Intel(R) Core(TM) i7-4800MQ CPU @ 2.70GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[ 0.310306] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.310345] ... version: 3
[ 0.310345] ... bit width: 48
[ 0.310345] ... generic registers: 4
[ 0.310346] ... value mask: 0000ffffffffffff
[ 0.310346] ... max period: 00007fffffffffff
[ 0.310347] ... fixed-purpose events: 3
[ 0.310347] ... event mask: 000000070000000f
[ 0.310375] rcu: Hierarchical SRCU implementation.
[ 0.310996] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.310996] smp: Bringing up secondary CPUs ...
[ 0.310996] x86: Booting SMP configuration:
[ 0.310996] .... node #0, CPUs: #1
[ 0.310996] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[ 0.310996] #2 #3 #4 #5 #6 #7
[ 0.310996] smp: Brought up 1 node, 8 CPUs
[ 0.310996] smpboot: Max logical packages: 1
[ 0.310996] smpboot: Total of 8 processors activated (43100.97 BogoMIPS)
[ 0.311367] devtmpfs: initialized
[ 0.311367] x86/mm: Memory block size: 128MB
[ 0.311928] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.311928] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.311928] pinctrl core: initialized pinctrl subsystem
[ 0.311928] RTC time: 11:16:40, date: 10/30/19
[ 0.311928] NET: Registered protocol family 16
[ 0.311928] audit: initializing netlink subsys (disabled)
[ 0.311928] audit: type=2000 audit(1572434200.060:1): state=initialized audit_enabled=0 res=1
[ 0.311928] cpuidle: using governor ladder
[ 0.311928] cpuidle: using governor menu
[ 0.311928] ACPI: bus type PCI registered
[ 0.311928] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.311928] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.311928] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.311928] PCI: Using configuration type 1 for base access
[ 0.311928] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.311928] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.311928] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.311928] ACPI: Added _OSI(Module Device)
[ 0.311928] ACPI: Added _OSI(Processor Device)
[ 0.311928] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.311928] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.311928] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.311928] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.314387] ACPI: 3 ACPI AML tables successfully acquired and loaded
[ 0.315838] ACPI: EC: EC started
[ 0.315839] ACPI: EC: interrupt blocked
[ 0.316151] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
[ 0.316153] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.316154] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions
[ 0.316154] ACPI: Interpreter enabled
[ 0.316168] ACPI: (supports S0 S3 S4 S5)
[ 0.316169] ACPI: Using IOAPIC for interrupt routing
[ 0.316185] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.320999] ACPI: Power Resource [FPWR] (off)
[ 0.321207] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.321211] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.321248] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[ 0.321256] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.321312] acpi PNP0A08:00: ignoring host bridge window [mem 0x000c4000-0x000c7fff window] (conflicts with Video ROM [mem 0x000c0000-0x000c69ff])
[ 0.321440] PCI host bridge to bus 0000:00
[ 0.321441] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.321442] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.321443] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.321444] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.321445] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.321447] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.321448] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.321450] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.321451] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.321452] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.321453] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.321454] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.321455] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.321456] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.321456] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[ 0.321457] pci_bus 0000:00: root bus resource [mem 0x82200001-0xefffffff window]
[ 0.321458] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[ 0.321459] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.321465] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
[ 0.321542] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
[ 0.321573] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.321631] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000
[ 0.321641] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe03fffff 64bit]
[ 0.321646] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.321649] pci 0000:00:02.0: reg 0x20: [io 0x1800-0x183f]
[ 0.321710] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[ 0.321718] pci 0000:00:03.0: reg 0x10: [mem 0xe0638000-0xe063bfff 64bit]
[ 0.321785] pci 0000:00:04.0: [8086:0c03] type 00 class 0x118000
[ 0.321794] pci 0000:00:04.0: reg 0x10: [mem 0xe0630000-0xe0637fff 64bit]
[ 0.321885] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[ 0.321909] pci 0000:00:14.0: reg 0x10: [mem 0xe0620000-0xe062ffff 64bit]
[ 0.321978] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.322065] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[ 0.322160] pci 0000:00:16.0: reg 0x10: [mem 0xe0645000-0xe064500f 64bit]
[ 0.322476] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.322584] pci 0000:00:19.0: [8086:153a] type 00 class 0x020000
[ 0.322605] pci 0000:00:19.0: reg 0x10: [mem 0xe0600000-0xe061ffff]
[ 0.322613] pci 0000:00:19.0: reg 0x14: [mem 0xe0640000-0xe0640fff]
[ 0.322621] pci 0000:00:19.0: reg 0x18: [io 0x1840-0x185f]
[ 0.322687] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.322745] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[ 0.322765] pci 0000:00:1a.0: reg 0x10: [mem 0xe0642000-0xe06423ff]
[ 0.322844] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.322903] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[ 0.322926] pci 0000:00:1b.0: reg 0x10: [mem 0xe063c000-0xe063ffff 64bit]
[ 0.323007] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.323068] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[ 0.323154] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.323231] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400
[ 0.323317] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.323394] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
[ 0.323475] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.323544] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
[ 0.323625] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.323694] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400
[ 0.323775] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.323847] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[ 0.323868] pci 0000:00:1d.0: reg 0x10: [mem 0xe0643000-0xe06433ff]
[ 0.323947] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.324012] pci 0000:00:1f.0: [8086:8c4f] type 00 class 0x060100
[ 0.324199] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
[ 0.324219] pci 0000:00:1f.2: reg 0x10: [io 0x1880-0x1887]
[ 0.324227] pci 0000:00:1f.2: reg 0x14: [io 0x1890-0x1893]
[ 0.324235] pci 0000:00:1f.2: reg 0x18: [io 0x1888-0x188f]
[ 0.324243] pci 0000:00:1f.2: reg 0x1c: [io 0x1894-0x1897]
[ 0.324252] pci 0000:00:1f.2: reg 0x20: [io 0x1860-0x187f]
[ 0.324260] pci 0000:00:1f.2: reg 0x24: [mem 0xe0641000-0xe06417ff]
[ 0.324303] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.324359] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[ 0.324380] pci 0000:00:1f.3: reg 0x10: [mem 0xe0644000-0xe06440ff 64bit]
[ 0.324403] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.324488] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.324606] pci 0000:02:00.0: [10ec:5227] type 00 class 0xff0000
[ 0.324713] pci 0000:02:00.0: reg 0x10: [mem 0xe0400000-0xe0400fff]
[ 0.325236] pci 0000:02:00.0: supports D1 D2
[ 0.325237] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.325554] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.325559] pci 0000:00:1c.0: bridge window [mem 0xe0400000-0xe04fffff]
[ 0.325622] pci 0000:03:00.0: [168c:0034] type 00 class 0x028000
[ 0.325676] pci 0000:03:00.0: reg 0x10: [mem 0xe0500000-0xe057ffff 64bit]
[ 0.325756] pci 0000:03:00.0: reg 0x30: [mem 0xe0580000-0xe058ffff pref]
[ 0.325873] pci 0000:03:00.0: supports D1
[ 0.325874] pci 0000:03:00.0: PME# supported from D0 D1 D3hot
[ 0.326013] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.326018] pci 0000:00:1c.1: bridge window [mem 0xe0500000-0xe05fffff]
[ 0.326025] pci 0000:00:1c.2: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.326032] pci 0000:00:1c.3: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.326040] pci 0000:00:1c.4: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.326095] pci 0000:00:1c.2: PCI bridge to [bus 04-ff]
[ 0.326098] pci 0000:00:1c.2: bridge window [io 0x0000-0x0fff]
[ 0.326101] pci 0000:00:1c.2: bridge window [mem 0x00000000-0x000fffff]
[ 0.326106] pci 0000:00:1c.2: bridge window [mem 0x00000000-0x000fffff 64bit pref]
[ 0.326108] pci_bus 0000:04: busn_res: [bus 04-ff] end is updated to 04
[ 0.326146] pci 0000:00:1c.3: PCI bridge to [bus 05-ff]
[ 0.326149] pci 0000:00:1c.3: bridge window [io 0x0000-0x0fff]
[ 0.326152] pci 0000:00:1c.3: bridge window [mem 0x00000000-0x000fffff]
[ 0.326157] pci 0000:00:1c.3: bridge window [mem 0x00000000-0x000fffff 64bit pref]
[ 0.326158] pci_bus 0000:05: busn_res: [bus 05-ff] end is updated to 05
[ 0.326197] pci 0000:00:1c.4: PCI bridge to [bus 06-ff]
[ 0.326200] pci 0000:00:1c.4: bridge window [io 0x0000-0x0fff]
[ 0.326203] pci 0000:00:1c.4: bridge window [mem 0x00000000-0x000fffff]
[ 0.326208] pci 0000:00:1c.4: bridge window [mem 0x00000000-0x000fffff 64bit pref]
[ 0.326209] pci_bus 0000:06: busn_res: [bus 06-ff] end is updated to 06
[ 0.326320] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 12 14 15) *11, disabled.
[ 0.326372] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 11 12 14 15) *10, disabled.
[ 0.326422] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 12 14 15), disabled.
[ 0.326470] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 11 12 14 15) *9, disabled.
[ 0.326518] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 *6 7 10 12 14 15), disabled.
[ 0.326566] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.326615] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12 14 15) *11, disabled.
[ 0.326662] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 11 12 14 15), disabled.
[ 0.327250] ACPI: EC: interrupt unblocked
[ 0.327258] ACPI: EC: event unblocked
[ 0.327264] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.327265] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
[ 0.327310] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.327310] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.327310] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.327310] vgaarb: loaded
[ 0.327310] ACPI: bus type USB registered
[ 0.327310] usbcore: registered new interface driver usbfs
[ 0.327310] usbcore: registered new interface driver hub
[ 0.327310] usbcore: registered new device driver usb
[ 0.327310] pps_core: LinuxPPS API ver. 1 registered
[ 0.327310] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.327310] PTP clock support registered
[ 0.327310] EDAC MC: Ver: 3.0.0
[ 0.327310] PCI: Using ACPI for IRQ routing
[ 0.327310] PCI: pci_cache_line_size set to 64 bytes
[ 0.327310] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.327310] e820: reserve RAM buffer [mem 0x7f71e000-0x7fffffff]
[ 0.327310] e820: reserve RAM buffer [mem 0x47de00000-0x47fffffff]
[ 0.330997] NetLabel: Initializing
[ 0.330997] NetLabel: domain hash size = 128
[ 0.330997] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.330997] NetLabel: unlabeled traffic allowed by default
[ 0.331043] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.331047] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.333061] clocksource: Switched to clocksource tsc-early
[ 0.339522] VFS: Disk quotas dquot_6.6.0
[ 0.339534] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.339590] pnp: PnP ACPI init
[ 0.339683] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.339684] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.339685] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.339686] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.339688] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.339689] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.339690] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.339692] system 00:00: [mem 0xfed45000-0xfed8ffff] could not be reserved
[ 0.339695] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.340083] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.340086] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.340163] system 00:02: [io 0x0500-0x05fe] has been reserved
[ 0.340165] system 00:02: [io 0x0480-0x04ff] has been reserved
[ 0.340167] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.340183] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.340207] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.340225] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.340244] pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active)
[ 0.340258] pnp: PnP ACPI: found 7 devices
[ 0.345694] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.345748] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.345754] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.345759] pci 0000:00:1c.0: bridge window [mem 0xe0400000-0xe04fffff]
[ 0.345767] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.345771] pci 0000:00:1c.1: bridge window [mem 0xe0500000-0xe05fffff]
[ 0.345779] pci 0000:00:1c.2: PCI bridge to [bus 04]
[ 0.345790] pci 0000:00:1c.3: PCI bridge to [bus 05]
[ 0.345800] pci 0000:00:1c.4: PCI bridge to [bus 06]
[ 0.345812] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.345813] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.345814] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.345815] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.345816] pci_bus 0000:00: resource 8 [mem 0x000c8000-0x000cbfff window]
[ 0.345817] pci_bus 0000:00: resource 9 [mem 0x000cc000-0x000cffff window]
[ 0.345818] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window]
[ 0.345818] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window]
[ 0.345819] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window]
[ 0.345820] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window]
[ 0.345821] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window]
[ 0.345822] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window]
[ 0.345823] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window]
[ 0.345823] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window]
[ 0.345824] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff window]
[ 0.345825] pci_bus 0000:00: resource 19 [mem 0x82200001-0xefffffff window]
[ 0.345826] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed44fff window]
[ 0.345827] pci_bus 0000:02: resource 1 [mem 0xe0400000-0xe04fffff]
[ 0.345828] pci_bus 0000:03: resource 1 [mem 0xe0500000-0xe05fffff]
[ 0.345902] NET: Registered protocol family 2
[ 0.346064] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes)
[ 0.346103] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.346234] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.346337] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.346368] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.346403] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.346464] NET: Registered protocol family 1
[ 0.346468] NET: Registered protocol family 44
[ 0.346476] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.347108] PCI: CLS 64 bytes, default 64
[ 0.347137] Unpacking initramfs...
[ 0.464159] Freeing initrd memory: 9168K
[ 0.531024] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.531026] software IO TLB: mapped [mem 0x7ae2a000-0x7ee2a000] (64MB)
[ 0.531161] Scanning for low memory corruption every 60 seconds
[ 0.531604] Initialise system trusted keyrings
[ 0.531611] Key type blacklist registered
[ 0.531655] workingset: timestamp_bits=41 max_order=22 bucket_order=0
[ 0.532531] zbud: loaded
[ 0.533640] Key type asymmetric registered
[ 0.533641] Asymmetric key parser 'x509' registered
[ 0.533648] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[ 0.533675] io scheduler noop registered
[ 0.533676] io scheduler deadline registered (default)
[ 0.533700] io scheduler cfq registered
[ 0.533700] io scheduler mq-deadline registered (default)
[ 0.533701] io scheduler kyber registered
[ 0.533718] io scheduler bfq registered
[ 0.534840] pcieport 0000:00:1c.0: AER enabled with IRQ 27
[ 0.534861] pcieport 0000:00:1c.1: AER enabled with IRQ 28
[ 0.534873] pcieport 0000:00:01.0: Signaling PME with IRQ 26
[ 0.534882] pcieport 0000:00:1c.0: Signaling PME with IRQ 27
[ 0.534892] pcieport 0000:00:1c.1: Signaling PME with IRQ 28
[ 0.534905] pcieport 0000:00:1c.2: Signaling PME with IRQ 29
[ 0.534918] pcieport 0000:00:1c.3: Signaling PME with IRQ 30
[ 0.534931] pcieport 0000:00:1c.4: Signaling PME with IRQ 31
[ 0.534950] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.535000] intel_idle: MWAIT substates: 0x42120
[ 0.535000] intel_idle: v0.4.1 model 0x3C
[ 0.535236] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.535280] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:24/PNP0C09:00/PNP0C0E:00/input/input0
[ 0.535293] ACPI: Sleep Button [SLPB]
[ 0.535331] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:24/PNP0C09:00/PNP0C0D:00/input/input1
[ 0.535339] ACPI: Lid Switch [LID]
[ 0.535371] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.535378] ACPI: Power Button [PWRF]
[ 0.537700] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.537701] ACPI: Thermal Zone [THM0] (54 C)
[ 0.538358] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.538359] ACPI: Thermal Zone [THM1] (27 C)
[ 0.538484] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.538801] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 0.538802] AMD IOMMUv2 functionality not available on this system
[ 0.539316] usbcore: registered new interface driver usbserial_generic
[ 0.539319] usbserial: USB Serial support registered for generic
[ 0.539336] rtc_cmos 00:03: RTC can wake from S4
[ 0.539500] rtc_cmos 00:03: registered as rtc0
[ 0.539511] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.539547] intel_pstate: Intel P-state driver initializing
[ 0.539906] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.540405] NET: Registered protocol family 10
[ 0.551690] Segment Routing with IPv6
[ 0.551707] NET: Registered protocol family 17
[ 0.552434] mce: Using 9 MCE banks
[ 0.552446] RAS: Correctable Errors collector initialized.
[ 0.552493] microcode: sig=0x306c3, pf=0x10, revision=0x27
[ 0.552597] microcode: Microcode Update Driver: v2.2.
[ 0.552605] sched_clock: Marking stable (552132401, 461455)->(565465507, -12871651)
[ 0.552796] registered taskstats version 1
[ 0.552802] Loading compiled-in X.509 certificates
[ 0.555336] Loaded X.509 cert 'Build time autogenerated kernel key: 680fbf86a75ff84b3f3ca2ff67595ed56d7bdc47'
[ 0.555355] zswap: loaded using pool lzo/zbud
[ 0.559007] Key type big_key registered
[ 0.559269] Magic number: 7:166:278
[ 0.559288] tty tty15: hash matches
[ 0.559359] rtc_cmos 00:03: setting system clock to 2019-10-30 11:16:40 UTC (1572434200)
[ 0.772058] Freeing unused decrypted memory: 2040K
[ 0.928938] Freeing unused kernel image memory: 1600K
[ 1.161126] Write protecting the kernel read-only data: 18432k
[ 1.166185] Freeing unused kernel image memory: 2008K
[ 1.166560] Freeing unused kernel image memory: 532K
[ 1.185034] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.185035] x86/mm: Checking user space page tables
[ 1.191446] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.191447] Run /init as init process
[ 1.196314] fbcon: Taking over console
[ 1.240649] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.242150] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.242266] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.242270] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.244506] ehci-pci: EHCI PCI platform driver
[ 1.244703] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.244708] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.244718] ehci-pci 0000:00:1a.0: debug port 2
[ 1.246528] SCSI subsystem initialized
[ 1.248626] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.248636] ehci-pci 0000:00:1a.0: irq 16, io mem 0xe0642000
[ 1.251289] libata version 3.00 loaded.
[ 1.253450] ahci 0000:00:1f.2: version 3.0
[ 1.253622] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 1.253652] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x23 impl SATA mode
[ 1.253653] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pio slum part apst
[ 1.253977] scsi host0: ahci
[ 1.254092] scsi host1: ahci
[ 1.254158] scsi host2: ahci
[ 1.254250] scsi host3: ahci
[ 1.256327] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.258194] scsi host4: ahci
[ 1.258283] scsi host5: ahci
[ 1.258335] ata1: SATA max UDMA/133 abar m2048@0xe0641000 port 0xe0641100 irq 33
[ 1.258337] ata2: SATA max UDMA/133 abar m2048@0xe0641000 port 0xe0641180 irq 33
[ 1.258337] ata3: DUMMY
[ 1.258338] ata4: DUMMY
[ 1.258339] ata5: DUMMY
[ 1.258340] ata6: SATA max UDMA/133 abar m2048@0xe0641000 port 0xe0641380 irq 33
[ 1.271024] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.271129] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 1.271131] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.271132] usb usb1: Product: EHCI Host Controller
[ 1.271133] usb usb1: Manufacturer: Linux 4.19.80-2-lts ehci_hcd
[ 1.271133] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.271260] hub 1-0:1.0: USB hub found
[ 1.271272] hub 1-0:1.0: 2 ports detected
[ 1.271390] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.271396] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.272459] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
[ 1.272464] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.272651] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 1.272652] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.272653] usb usb2: Product: xHCI Host Controller
[ 1.272654] usb usb2: Manufacturer: Linux 4.19.80-2-lts xhci-hcd
[ 1.272655] usb usb2: SerialNumber: 0000:00:14.0
[ 1.272759] hub 2-0:1.0: USB hub found
[ 1.272785] hub 2-0:1.0: 15 ports detected
[ 1.273184] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.273185] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.273190] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
[ 1.273191] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 1.273194] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 1.273206] ehci-pci 0000:00:1d.0: debug port 2
[ 1.273256] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
[ 1.273257] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.273258] usb usb4: Product: xHCI Host Controller
[ 1.273259] usb usb4: Manufacturer: Linux 4.19.80-2-lts xhci-hcd
[ 1.273260] usb usb4: SerialNumber: 0000:00:14.0
[ 1.273342] hub 4-0:1.0: USB hub found
[ 1.273360] hub 4-0:1.0: 6 ports detected
[ 1.277097] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.277110] ehci-pci 0000:00:1d.0: irq 23, io mem 0xe0643000
[ 1.301089] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.301523] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[ 1.301526] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.301527] usb usb3: Product: EHCI Host Controller
[ 1.301529] usb usb3: Manufacturer: Linux 4.19.80-2-lts ehci_hcd
[ 1.301530] usb usb3: SerialNumber: 0000:00:1d.0
[ 1.301831] hub 3-0:1.0: USB hub found
[ 1.301869] hub 3-0:1.0: 2 ports detected
[ 1.583780] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.584179] ata1.00: supports DRM functions and may not be fully accessible
[ 1.585380] ata1.00: ATA-10: Crucial_CT1024MX200SSD1, MU04, max UDMA/133
[ 1.585385] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.589945] ata1.00: supports DRM functions and may not be fully accessible
[ 1.595706] ata1.00: configured for UDMA/133
[ 1.601406] tsc: Refined TSC clocksource calibration: 2693.761 MHz
[ 1.601423] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x26d438c619d, max_idle_ns: 440795237946 ns
[ 1.601492] clocksource: Switched to clocksource tsc
[ 1.606314] scsi 0:0:0:0: Direct-Access ATA Crucial_CT1024MX MU04 PQ: 0 ANSI: 5
[ 1.631095] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.631100] usb 2-10: new high-speed USB device number 2 using xhci_hcd
[ 1.661098] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 1.813395] usb 2-10: config 1 has an invalid interface number: 8 but max is 3
[ 1.813400] usb 2-10: config 1 has no interface number 1
[ 1.814013] usb 2-10: New USB device found, idVendor=1199, idProduct=9079, bcdDevice= 0.06
[ 1.814018] usb 2-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.814021] usb 2-10: Product: Sierra Wireless EM7455 Qualcomm Snapdragon X7 LTE-A
[ 1.814024] usb 2-10: Manufacturer: Sierra Wireless, Incorporated
[ 1.814027] usb 2-10: SerialNumber: LF54854940021013
[ 1.831513] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05
[ 1.831519] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.831879] hub 1-1:1.0: USB hub found
[ 1.831933] hub 1-1:1.0: 6 ports detected
[ 1.861615] usb 3-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05
[ 1.861620] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.862056] hub 3-1:1.0: USB hub found
[ 1.862229] hub 3-1:1.0: 8 ports detected
[ 1.933405] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.961096] usb 2-11: new full-speed USB device number 3 using xhci_hcd
[ 2.142145] usb 2-11: New USB device found, idVendor=0cf3, idProduct=e006, bcdDevice= 0.01
[ 2.142150] usb 2-11: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.263617] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.265134] ata6.00: ATAPI: MATSHITADVD-RAM UJ8E2, SB01, max UDMA/133
[ 2.266646] ata6.00: configured for UDMA/133
[ 2.279208] scsi 5:0:0:0: CD-ROM MATSHITA DVD-RAM UJ8E2 SB01 PQ: 0 ANSI: 5
[ 2.291082] usb 2-12: new high-speed USB device number 4 using xhci_hcd
[ 2.340032] ata1.00: Enabling discard_zeroes_data
[ 2.340092] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 2.340096] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 2.340108] sd 0:0:0:0: [sda] Write Protect is off
[ 2.340112] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.340129] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.340354] ata1.00: Enabling discard_zeroes_data
[ 2.342422] sda: sda1 sda2 sda3 sda4 sda5
[ 2.343105] ata1.00: Enabling discard_zeroes_data
[ 2.343362] sd 0:0:0:0: [sda] supports TCG Opal
[ 2.343366] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.356638] random: fast init done
[ 2.531024] raid6: sse2x1 gen() 12959 MB/s
[ 2.559161] usb 2-12: New USB device found, idVendor=04f2, idProduct=b39a, bcdDevice=26.03
[ 2.559162] usb 2-12: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.559172] usb 2-12: Product: Integrated Camera
[ 2.559173] usb 2-12: Manufacturer: SunplusIT INC.
[ 2.701019] raid6: sse2x1 xor() 8778 MB/s
[ 2.871020] raid6: sse2x2 gen() 15315 MB/s
[ 3.041021] raid6: sse2x2 xor() 10025 MB/s
[ 3.211022] raid6: sse2x4 gen() 18364 MB/s
[ 3.381019] raid6: sse2x4 xor() 11390 MB/s
[ 3.551020] raid6: avx2x1 gen() 25203 MB/s
[ 3.721022] raid6: avx2x1 xor() 16781 MB/s
[ 3.891020] raid6: avx2x2 gen() 29352 MB/s
[ 4.061020] raid6: avx2x2 xor() 18008 MB/s
[ 4.231019] raid6: avx2x4 gen() 33217 MB/s
[ 4.401021] raid6: avx2x4 xor() 21205 MB/s
[ 4.401021] raid6: using algorithm avx2x4 gen() 33217 MB/s
[ 4.401022] raid6: .... xor() 21205 MB/s, rmw enabled
[ 4.401022] raid6: using avx2x2 recovery algorithm
[ 4.401897] xor: automatically using best checksumming function avx
[ 4.432205] Btrfs loaded, crc32c=crc32c-intel
[ 4.434965] BTRFS: device fsid 2c366ba5-ae1a-48ef-895d-745c6adb516c devid 1 transid 86497 /dev/sda2
[ 4.503775] sr 5:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.503777] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 4.504001] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 5.176695] BTRFS info (device sda2): disk space caching is enabled
[ 5.176697] BTRFS info (device sda2): has skinny extents
[ 5.186414] BTRFS info (device sda2): enabling ssd optimizations
[ 5.405133] systemd[1]: systemd 243.78-1-arch running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 5.431172] systemd[1]: Detected architecture x86-64.
[ 5.435755] systemd[1]: Set hostname to <mylaptop>.
[ 5.530961] systemd[1]: /usr/lib/systemd/system/virtlogd.socket:6: ListenStream= references a path below legacy directory /var/run/, updating /var/run/libvirt/virtlogd-sock → /run/libvirt/virtlogd-sock; please update the unit file accordingly.
[ 5.531238] systemd[1]: /usr/lib/systemd/system/virtlogd-admin.socket:8: ListenStream= references a path below legacy directory /var/run/, updating /var/run/libvirt/virtlogd-admin-sock → /run/libvirt/virtlogd-admin-sock; please update the unit file accordingly.
[ 5.533920] systemd[1]: /usr/lib/systemd/system/libvirtd-admin.socket:9: ListenStream= references a path below legacy directory /var/run/, updating /var/run/libvirt/libvirt-admin-sock → /run/libvirt/libvirt-admin-sock; please update the unit file accordingly.
[ 5.534046] systemd[1]: /usr/lib/systemd/system/libvirtd-ro.socket:9: ListenStream= references a path below legacy directory /var/run/, updating /var/run/libvirt/libvirt-sock-ro → /run/libvirt/libvirt-sock-ro; please update the unit file accordingly.
[ 5.534161] systemd[1]: /usr/lib/systemd/system/libvirtd.socket:7: ListenStream= references a path below legacy directory /var/run/, updating /var/run/libvirt/libvirt-sock → /run/libvirt/libvirt-sock; please update the unit file accordingly.
[ 5.534244] systemd[1]: /usr/lib/systemd/system/virtlockd.socket:6: ListenStream= references a path below legacy directory /var/run/, updating /var/run/libvirt/virtlockd-sock → /run/libvirt/virtlockd-sock; please update the unit file accordingly.
[ 5.534429] systemd[1]: /usr/lib/systemd/system/virtlockd-admin.socket:8: ListenStream= references a path below legacy directory /var/run/, updating /var/run/libvirt/virtlockd-admin-sock → /run/libvirt/virtlockd-admin-sock; please update the unit file accordingly.
[ 5.555899] random: lvm: uninitialized urandom read (4 bytes read)
[ 5.556876] BTRFS info (device sda2): use lzo compression, level 0
[ 5.556880] BTRFS info (device sda2): turning on discard
[ 5.556885] BTRFS info (device sda2): disk space caching is enabled
[ 5.769015] audit: type=1130 audit(1572434205.692:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.780665] audit: type=1130 audit(1572434205.702:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.821308] EDAC ie31200: No ECC support
[ 5.839104] ACPI: AC Adapter [AC] (off-line)
[ 5.842651] Non-volatile memory driver v1.3
[ 5.847519] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 5.847520] Linux agpgart interface v0.103
[ 5.847521] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 5.847873] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 5.855727] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 5.866457] media: Linux media interface: v0.10
[ 5.869654] battery: ACPI: Battery Slot [BAT0] (battery present)
[ 5.869794] battery: ACPI: Battery Slot [BAT1] (battery absent)
[ 5.875002] usbcore: registered new interface driver qcserial
[ 5.875012] usbserial: USB Serial support registered for Qualcomm USB modem
[ 5.875435] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 5.878030] tpm_tis 00:06: 1.2 TPM (device-id 0x0, rev-id 78)
[ 5.881053] usbcore: registered new interface driver cdc_wdm
[ 5.884065] qcserial 2-10:1.0: Qualcomm USB modem converter detected
[ 5.884136] usb 2-10: Qualcomm USB modem converter now attached to ttyUSB0
[ 5.885214] qcserial 2-10:1.2: Qualcomm USB modem converter detected
[ 5.885275] usb 2-10: Qualcomm USB modem converter now attached to ttyUSB1
[ 5.886313] qcserial 2-10:1.3: Qualcomm USB modem converter detected
[ 5.886370] usb 2-10: Qualcomm USB modem converter now attached to ttyUSB2
[ 5.916540] Adding 8190972k swap on /dev/sda5. Priority:-2 extents:1 across:8190972k SSFS
[ 5.965625] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[ 5.991608] audit: type=1131 audit(1572434205.922:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=haveged comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
[ 6.060210] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 28:d2:44:fe:69:21
[ 6.060211] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 6.060241] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: 1000FF-0FF
[ 6.072128] audit: type=1130 audit(1572434206.002:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 6.079461] qmi_wwan 2-10:1.8: cdc-wdm0: USB WDM device
[ 6.079644] qmi_wwan 2-10:1.8 wwan0: register 'qmi_wwan' at usb-0000:00:14.0-10, WWAN/QMI device, ee:52:bf:07:90:c1
[ 6.079682] usbcore: registered new interface driver qmi_wwan
[ 6.091985] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[ 6.091987] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 6.091987] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 6.091988] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 6.091989] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 6.094778] videodev: Linux video capture interface: v2.00
[ 6.095028] Bluetooth: Core ver 2.22
[ 6.095042] NET: Registered protocol family 31
[ 6.095043] Bluetooth: HCI device and connection manager initialized
[ 6.095046] Bluetooth: HCI socket layer initialized
[ 6.095048] Bluetooth: L2CAP socket layer initialized
[ 6.095052] Bluetooth: SCO socket layer initialized
[ 6.100946] audit: type=1130 audit(1572434206.022:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-fsck@dev-disk-by\x2duuid-6f855176\x2d3959\x2d4b18\x2da64e\x2d78a2d1bb2290 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 6.104055] audit: type=1130 audit(1572434206.032:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=haveged comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 6.104058] audit: type=1131 audit(1572434206.032:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=haveged comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 6.104060] audit: type=1130 audit(1572434206.032:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=haveged comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 6.113123] audit: type=1130 audit(1572434206.042:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-fsck@dev-disk-by\x2duuid-c004bd8e\x2d64d4\x2d4086\x2daa1f\x2d1c17b9823994 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 6.122333] audit: type=1130 audit(1572434206.052:11): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-fsck@dev-disk-by\x2duuid-b5515833\x2d76b8\x2d4894\x2db033\x2d6e58c3346ca5 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 6.127792] usbcore: registered new interface driver btusb
[ 6.130771] cryptd: max_cpu_qlen set to 1000
[ 6.132794] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3232: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 6.132796] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 6.132797] snd_hda_codec_realtek hdaudioC1D0: hp_outs=2 (0x16/0x15/0x0/0x0/0x0)
[ 6.132798] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 6.132799] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 6.132800] snd_hda_codec_realtek hdaudioC1D0: Dock Mic=0x19
[ 6.132802] snd_hda_codec_realtek hdaudioC1D0: Mic=0x1a
[ 6.132803] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12
[ 6.144052] AVX2 version of gcm_enc/dec engaged.
[ 6.144053] AES CTR mode by8 optimization enabled
[ 6.153300] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 6.156213] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 6.159931] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 6.159934] cfg80211: failed to load regulatory.db
[ 6.213959] usbcore: registered new interface driver ath3k
[ 6.213985] usb 2-11: USB disconnect, device number 3
[ 6.231830] iTCO_vendor_support: vendor-support=0
[ 6.235605] e1000e 0000:00:19.0 eno0: renamed from eth0
[ 6.272088] qmi_wwan 2-10:1.8 wwp0s20u10i8: renamed from wwan0
[ 6.272459] gpio_ich: GPIO from 436 to 511 on gpio_ich
[ 6.288745] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[ 6.292712] EXT4-fs (sda1): mounted filesystem without journal. Opts: block_validity,barrier,user_xattr,acl,stripe=4
[ 6.298592] VFIO - User Level meta-driver version: 0.3
[ 6.298680] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 6.298738] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x0560)
[ 6.299399] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.302922] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: discard,data=ordered
[ 6.303422] intel-spi intel-spi: s25fl064k (8192 Kbytes)
[ 6.307199] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: discard,data=ordered
[ 6.317097] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b39a)
[ 6.319067] systemd-journald[294]: Received client request to flush runtime journal.
[ 6.327967] Creating 1 MTD partitions on "intel-spi":
[ 6.327970] 0x000000000000-0x000000c00000 : "BIOS"
[ 6.327971] mtd: partition "BIOS" extends beyond the end of device "intel-spi" -- size truncated to 0x800000
[ 6.342532] uvcvideo 2-12:1.0: Entity type for entity Extension 4 was not initialized!
[ 6.342535] uvcvideo 2-12:1.0: Entity type for entity Extension 3 was not initialized!
[ 6.342536] uvcvideo 2-12:1.0: Entity type for entity Processing 2 was not initialized!
[ 6.342537] uvcvideo 2-12:1.0: Entity type for entity Camera 1 was not initialized!
[ 6.342596] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:14.0/usb2/2-12/2-12:1.0/input/input8
[ 6.342646] usbcore: registered new interface driver uvcvideo
[ 6.342647] USB Video Class driver (1.1.1)
[ 6.381488] snd_hda_codec_realtek hdaudioC1D0: Failed to find thinkpad-acpi symbol tpacpi_led_set
[ 6.453150] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input7
[ 6.453289] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9
[ 6.453333] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
[ 6.453377] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
[ 6.453418] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
[ 6.479423] [drm] Replacing VGA console driver
[ 6.522723] psmouse serio1: synaptics: queried max coordinates: x [..5112], y [..3834]
[ 6.530939] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 6.530940] [drm] Driver supports precise vblank timestamp query.
[ 6.530959] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 6.551608] psmouse serio1: synaptics: queried min coordinates: x [1024..], y [1024..]
[ 6.551612] psmouse serio1: synaptics: Your touchpad (PNP: PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
[ 6.554280] ath: phy0: ASPM enabled: 0x43
[ 6.554283] ath: EEPROM regdomain: 0x6a
[ 6.554283] ath: EEPROM indicates we should expect a direct regpair map
[ 6.554285] ath: Country alpha2 being used: 00
[ 6.554285] ath: Regpair used: 0x6a
[ 6.574309] random: crng init done
[ 6.602665] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 6.602965] ieee80211 phy0: Atheros AR9462 Rev:3 mem=0xffffb85602880000, irq=17
[ 6.604510] ath9k 0000:03:00.0 wlp3s0: renamed from wlan0
[ 6.608174] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd001a3/0x940300/0x127c00/0x0, board id: 2722, fw id: 1484859
[ 6.608179] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[ 6.631013] usb 2-11: new full-speed USB device number 5 using xhci_hcd
[ 6.642163] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[ 6.645368] mousedev: PS/2 mouse device common for all mice
[ 6.766630] intel_rapl: Found RAPL domain package
[ 6.766631] intel_rapl: Found RAPL domain core
[ 6.766632] intel_rapl: Found RAPL domain uncore
[ 6.766633] intel_rapl: Found RAPL domain dram
[ 6.877097] [drm] Initialized i915 1.6.0 20180719 for 0000:00:02.0 on minor 0
[ 6.877246] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 6.931111] acpi device:05: registered as cooling_device10
[ 6.931148] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input14
[ 6.931303] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 7.262051] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 7.282617] fbcon: inteldrmfb (fb0) is primary device
[ 7.456121] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input13
[ 7.786591] IPv6: ADDRCONF(NETDEV_UP): eno0: link is not ready
[ 8.021248] IPv6: ADDRCONF(NETDEV_UP): eno0: link is not ready
[ 8.024873] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 8.037173] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 8.051749] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 8.430514] Console: switching to colour frame buffer device 240x67
[ 8.452028] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 8.558709] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15
[ 8.636973] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 9.556006] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 9.560931] tun: Universal TUN/TAP device driver, 1.6
[ 9.561394] virbr0: port 1(virbr0-nic) entered blocking state
[ 9.561395] virbr0: port 1(virbr0-nic) entered disabled state
[ 9.561437] device virbr0-nic entered promiscuous mode
[ 9.793390] virbr0: port 1(virbr0-nic) entered blocking state
[ 9.793392] virbr0: port 1(virbr0-nic) entered listening state
[ 9.828230] virbr0: port 1(virbr0-nic) entered disabled state
[ 9.951667] L1TF CPU bug present and SMT on, data leak possible. See CVE-2018-3646 and https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/l1tf.html for details.
[ 11.611745] kauditd_printk_skb: 181 callbacks suppressed
[ 11.611747] audit: type=1131 audit(1572434211.542:91): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 11.862272] usb 2-11: New USB device found, idVendor=0cf3, idProduct=e006, bcdDevice= 0.02
[ 11.862278] usb 2-11: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 11.879303] audit: type=1130 audit(1572434211.802:92): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 12.213705] audit: type=1006 audit(1572434212.142:93): pid=463 uid=0 old-auid=4294967295 auid=1000 tty=tty1 old-ses=4294967295 ses=1 res=1
[ 12.226210] audit: type=1130 audit(1572434212.152:94): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 12.230754] audit: type=1006 audit(1572434212.152:95): pid=698 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=2 res=1
[ 12.291139] audit: type=1130 audit(1572434212.222:96): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 12.721902] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 14.593408] fuse init (API version 7.27)
[ 15.769692] audit: type=1130 audit(1572434215.692:97): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=rtkit-daemon comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 15.966937] audit: type=1130 audit(1572434215.892:98): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=upower comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 16.004697] audit: type=1130 audit(1572434215.932:99): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=udisks2 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 16.832682] wlp3s0: authenticate with 90:83:4b:42:b7:51
[ 16.845925] wlp3s0: send auth to 90:83:4b:42:b7:51 (try 1/3)
[ 16.849316] wlp3s0: authenticated
[ 16.861028] wlp3s0: associate with 90:83:4b:42:b7:51 (try 1/3)
[ 16.865589] wlp3s0: RX AssocResp from 90:83:4b:42:b7:51 (capab=0x411 status=0 aid=2)
[ 16.865735] wlp3s0: associated
[ 16.881920] audit: type=1131 audit(1572434216.812:100): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 16.895379] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[ 17.005530] audit: type=1131 audit(1572434216.932:101): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dnsmasq comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 17.018275] audit: type=1130 audit(1572434216.942:102): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dnsmasq comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 33.016189] audit: type=1131 audit(1572434232.942:103): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 37.753044] audit: type=1131 audit(1572434238.428:104): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 187.873167] audit: type=1130 audit(1572434388.542:105): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=pcscd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 259.903773] audit: type=1131 audit(1572434460.586:106): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=pcscd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'