blob: bec63eee49079c5b1a7a811f5f963bdb8a56951d [file] [log] [blame]
[ 0.000000] Linux version 5.19.17 (root@z-mp.slackware.lan) (gcc (GCC) 12.2.0, GNU ld version 2.39-slack151) #1 SMP PREEMPT_DYNAMIC Mon Oct 24 13:00:29 CDT 2022
[ 0.000000] Command line: BOOT_IMAGE=/boot/generic initrd=/boot/initrd.img load_ramdisk=1 prompt_ramdisk=0 rw printk.time=0 kbd=us cryptomgr.notests
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
[ 0.000000] signal: max sigframe size: 1520
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007f735fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007f736000-0x0000000083ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001fbffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 3.0.0 present.
[ 0.000000] DMI: Acer G43T-AM3/G43T-AM3, BIOS 4.22-352-gc7932e267da0 01/05/2024
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2833.087 MHz processor
[ 0.001105] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.001110] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.001117] last_pfn = 0x1fc000 max_arch_pfn = 0x400000000
[ 0.004153] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.004576] last_pfn = 0x7f736 max_arch_pfn = 0x400000000
[ 0.018528] RAMDISK: [mem 0x7e4d0000-0x7f735fff]
[ 0.018533] ACPI: Early table checksum verification disabled
[ 0.018538] ACPI: RSDP 0x00000000000F61B0 000024 (v02 COREv4)
[ 0.018544] ACPI: XSDT 0x000000007F74B0E0 000054 (v01 COREv4 COREBOOT 00000000 CORE 20200717)
[ 0.018552] ACPI: FACP 0x000000007F74D5E0 000114 (v06 COREv4 COREBOOT 00000000 CORE 20200717)
[ 0.018559] ACPI: DSDT 0x000000007F74B280 00235B (v02 COREv4 COREBOOT 20090811 INTL 20200717)
[ 0.018565] ACPI: FACS 0x000000007F74B240 000040
[ 0.018569] ACPI: FACS 0x000000007F74B240 000040
[ 0.018573] ACPI: SSDT 0x000000007F74D700 00068C (v02 COREv4 COREBOOT 00000000 CORE 20200717)
[ 0.018578] ACPI: MCFG 0x000000007F74DD90 00003C (v01 COREv4 COREBOOT 00000000 CORE 20200717)
[ 0.018583] ACPI: APIC 0x000000007F74DDD0 000072 (v03 COREv4 COREBOOT 00000000 CORE 20200717)
[ 0.018588] ACPI: SPCR 0x000000007F74DE50 000058 (v04 COREv4 COREBOOT 00000000 CORE 20200717)
[ 0.018593] ACPI: HPET 0x000000007F74DEB0 000038 (v01 COREv4 COREBOOT 00000000 CORE 20200717)
[ 0.018597] ACPI: Reserving FACP table memory at [mem 0x7f74d5e0-0x7f74d6f3]
[ 0.018599] ACPI: Reserving DSDT table memory at [mem 0x7f74b280-0x7f74d5da]
[ 0.018600] ACPI: Reserving FACS table memory at [mem 0x7f74b240-0x7f74b27f]
[ 0.018602] ACPI: Reserving FACS table memory at [mem 0x7f74b240-0x7f74b27f]
[ 0.018603] ACPI: Reserving SSDT table memory at [mem 0x7f74d700-0x7f74dd8b]
[ 0.018605] ACPI: Reserving MCFG table memory at [mem 0x7f74dd90-0x7f74ddcb]
[ 0.018607] ACPI: Reserving APIC table memory at [mem 0x7f74ddd0-0x7f74de41]
[ 0.018608] ACPI: Reserving SPCR table memory at [mem 0x7f74de50-0x7f74dea7]
[ 0.018610] ACPI: Reserving HPET table memory at [mem 0x7f74deb0-0x7f74dee7]
[ 0.018670] No NUMA configuration found
[ 0.018671] Faking a node at [mem 0x0000000000000000-0x00000001fbffffff]
[ 0.018676] NODE_DATA(0) allocated [mem 0x1fbffb000-0x1fbffffff]
[ 0.018711] Zone ranges:
[ 0.018712] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.018714] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.018717] Normal [mem 0x0000000100000000-0x00000001fbffffff]
[ 0.018719] Device empty
[ 0.018721] Movable zone start for each node
[ 0.018722] Early memory node ranges
[ 0.018722] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.018724] node 0: [mem 0x0000000000100000-0x000000007f735fff]
[ 0.018726] node 0: [mem 0x0000000100000000-0x00000001fbffffff]
[ 0.018729] Initmem setup node 0 [mem 0x0000000000001000-0x00000001fbffffff]
[ 0.018736] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.018787] On node 0, zone DMA: 97 pages in unavailable ranges
[ 0.105030] On node 0, zone Normal: 2250 pages in unavailable ranges
[ 0.105828] On node 0, zone Normal: 16384 pages in unavailable ranges
[ 0.105836] Reserving Intel graphics memory at [mem 0x80000000-0x83ffffff]
[ 0.106042] ACPI: PM-Timer IO Port: 0x508
[ 0.106054] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.106067] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.106072] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.106075] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.106081] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.106083] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.106092] ACPI: SPCR: console: uart,io,0x3f8
[ 0.106095] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.106114] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.106117] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.106118] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.106120] PM: hibernation: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.106122] PM: hibernation: Registered nosave memory: [mem 0x7f736000-0x83ffffff]
[ 0.106123] PM: hibernation: Registered nosave memory: [mem 0x84000000-0xdfffffff]
[ 0.106125] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.106126] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xfed0ffff]
[ 0.106127] PM: hibernation: Registered nosave memory: [mem 0xfed10000-0xffffffff]
[ 0.106130] [mem 0x84000000-0xdfffffff] available for PCI devices
[ 0.106132] Booting paravirtualized kernel on bare hardware
[ 0.106138] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.114763] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[ 0.116185] percpu: Embedded 59 pages/cpu s204800 r8192 d28672 u524288
[ 0.116193] pcpu-alloc: s204800 r8192 d28672 u524288 alloc=1*2097152
[ 0.116198] pcpu-alloc: [0] 0 1 2 3
[ 0.116230] Fallback order for Node 0: 0
[ 0.116236] Built 1 zonelists, mobility grouping on. Total pages: 1529689
[ 0.116238] Policy zone: Normal
[ 0.116240] Kernel command line: BOOT_IMAGE=/boot/generic initrd=/boot/initrd.img load_ramdisk=1 prompt_ramdisk=0 rw printk.time=0 kbd=us cryptomgr.notests
[ 0.116325] ignoring the deprecated load_ramdisk= option
[ 0.116341] ignoring the deprecated prompt_ramdisk= option
[ 0.116380] Unknown kernel command line parameters "BOOT_IMAGE=/boot/generic kbd=us", will be passed to user space.
[ 0.120381] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.122861] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.122947] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.297703] Memory: 5984020K/6216528K available (14345K kernel code, 2609K rwdata, 4748K rodata, 1900K init, 3368K bss, 232248K reserved, 0K cma-reserved)
[ 0.298208] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.298239] Kernel/User page tables isolation: enabled
[ 0.298271] ftrace: allocating 44052 entries in 173 pages
[ 0.309965] ftrace: allocated 173 pages with 5 groups
[ 0.310089] Dynamic Preempt: full
[ 0.310161] rcu: Preemptible hierarchical RCU implementation.
[ 0.310163] rcu: CONFIG_RCU_FANOUT set to non-default value of 32.
[ 0.310164] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.310166] Trampoline variant of Tasks RCU enabled.
[ 0.310167] Rude variant of Tasks RCU enabled.
[ 0.310168] Tracing variant of Tasks RCU enabled.
[ 0.310169] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 0.310170] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.312135] NR_IRQS: 16640, nr_irqs: 456, preallocated irqs: 16
[ 0.312330] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.313256] Console: colour VGA+ 80x25
[ 0.318730] printk: console [tty0] enabled
[ 0.318808] ACPI: Core revision 20220331
[ 0.318949] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.319031] APIC: Switch to symmetric I/O mode setup
[ 0.319414] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.324032] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x28d658e14fc, max_idle_ns: 440795254868 ns
[ 0.324110] Calibrating delay loop (skipped), value calculated using timer frequency.. 5666.17 BogoMIPS (lpj=2833087)
[ 0.324182] pid_max: default: 32768 minimum: 301
[ 0.324319] LSM: Security Framework initializing
[ 0.324471] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.324571] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.325133] CPU0: Thermal monitoring enabled (TM2)
[ 0.325189] process: using mwait in idle threads
[ 0.325235] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.325280] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[ 0.325329] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.325395] Spectre V2 : Mitigation: Retpolines
[ 0.325437] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.325487] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[ 0.325534] Speculative Store Bypass: Vulnerable
[ 0.325579] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.325626] MMIO Stale Data: Unknown: No mitigations
[ 0.343214] Freeing SMP alternatives memory: 44K
[ 0.445491] smpboot: CPU0: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz (family: 0x6, model: 0x17, stepping: 0xa)
[ 0.445836] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.445887] cblist_init_generic: Setting shift to 2 and lim to 1.
[ 0.445968] cblist_init_generic: Setting shift to 2 and lim to 1.
[ 0.446045] cblist_init_generic: Setting shift to 2 and lim to 1.
[ 0.446105] Performance Events: PEBS fmt0+, Core2 events, 4-deep LBR, Intel PMU driver.
[ 0.446105] ... version: 2
[ 0.446105] ... bit width: 40
[ 0.446105] ... generic registers: 2
[ 0.446105] ... value mask: 000000ffffffffff
[ 0.446105] ... max period: 000000007fffffff
[ 0.446105] ... fixed-purpose events: 3
[ 0.446105] ... event mask: 0000000700000003
[ 0.446275] rcu: Hierarchical SRCU implementation.
[ 0.446319] rcu: Max phase no-delay instances is 400.
[ 0.446552] smp: Bringing up secondary CPUs ...
[ 0.446779] x86: Booting SMP configuration:
[ 0.446821] .... node #0, CPUs: #1 #2 #3
[ 0.453152] smp: Brought up 1 node, 4 CPUs
[ 0.453222] smpboot: Max logical packages: 1
[ 0.453264] smpboot: Total of 4 processors activated (22664.69 BogoMIPS)
[ 0.455109] devtmpfs: initialized
[ 0.455233] x86/mm: Memory block size: 128MB
[ 0.457229] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.457304] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.457420] pinctrl core: initialized pinctrl subsystem
[ 0.458245] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.458479] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[ 0.458536] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.458592] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.458664] audit: initializing netlink subsys (disabled)
[ 0.458716] audit: type=2000 audit(1704646150.139:1): state=initialized audit_enabled=0 res=1
[ 0.458716] thermal_sys: Registered thermal governor 'fair_share'
[ 0.458716] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.458716] thermal_sys: Registered thermal governor 'step_wise'
[ 0.458716] thermal_sys: Registered thermal governor 'user_space'
[ 0.459119] cpuidle: using governor ladder
[ 0.459216] cpuidle: using governor menu
[ 0.459240] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.459398] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.459470] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.459541] PCI: Using configuration type 1 for base access
[ 0.463213] HugeTLB: can optimize 7 vmemmap pages for hugepages-2048kB
[ 0.463264] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.463521] cryptd: max_cpu_qlen set to 1000
[ 0.463922] raid6: skipped pq benchmark and selected sse2x4
[ 0.463968] raid6: using ssse3x2 recovery algorithm
[ 0.464076] ACPI: Added _OSI(Module Device)
[ 0.464109] ACPI: Added _OSI(Processor Device)
[ 0.464152] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.464195] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.464240] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.464284] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.464328] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.465917] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.466914] ACPI: Interpreter enabled
[ 0.466979] ACPI: PM: (supports S0 S1 S3 S4 S5)
[ 0.467023] ACPI: Using IOAPIC for interrupt routing
[ 0.467109] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.467178] PCI: Ignoring E820 reservations for host bridge windows
[ 0.472901] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.472956] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[ 0.473065] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability LTR DPC]
[ 0.473168] acpi PNP0A08:00: ignoring host bridge window [mem 0x000c4000-0x000c7fff window] (conflicts with Video ROM [mem 0x000c0000-0x000c71ff])
[ 0.473507] PCI host bridge to bus 0000:00
[ 0.473551] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.473601] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.473649] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000c3fff window]
[ 0.473699] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000fffff window]
[ 0.473749] pci_bus 0000:00: root bus resource [mem 0x84000000-0xfebfffff window]
[ 0.473800] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[ 0.473850] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.473913] pci 0000:00:00.0: [8086:2e20] type 00 class 0x060000
[ 0.473981] pci 0000:00:00.0: DMAR: Disabling IOMMU for graphics on this chipset
[ 0.474031] pci 0000:00:00.0: DMAR: Forcing write-buffer flush capability
[ 0.474217] pci 0000:00:02.0: [8086:2e22] type 00 class 0x030000
[ 0.474273] pci 0000:00:02.0: reg 0x10: [mem 0xfdc00000-0xfdffffff 64bit]
[ 0.474328] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.474381] pci 0000:00:02.0: reg 0x20: [io 0xeef8-0xeeff]
[ 0.474443] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.474593] pci 0000:00:02.1: [8086:2e23] type 00 class 0x038000
[ 0.474649] pci 0000:00:02.1: reg 0x10: [mem 0xfdb00000-0xfdbfffff 64bit]
[ 0.474822] pci 0000:00:19.0: [8086:10ce] type 00 class 0x020000
[ 0.474882] pci 0000:00:19.0: reg 0x10: [mem 0xfd8e0000-0xfd8fffff]
[ 0.474936] pci 0000:00:19.0: reg 0x14: [mem 0xfd8db000-0xfd8dbfff]
[ 0.474990] pci 0000:00:19.0: reg 0x18: [io 0xefe0-0xefff]
[ 0.475093] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.475178] pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
[ 0.475263] pci 0000:00:1a.0: reg 0x20: [io 0xefc0-0xefdf]
[ 0.475454] pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300
[ 0.475539] pci 0000:00:1a.1: reg 0x20: [io 0xefa0-0xefbf]
[ 0.475729] pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300
[ 0.475815] pci 0000:00:1a.2: reg 0x20: [io 0xef80-0xef9f]
[ 0.476009] pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
[ 0.476119] pci 0000:00:1a.7: reg 0x10: [mem 0xfd8d9000-0xfd8d93ff]
[ 0.476251] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.476415] pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300
[ 0.476477] pci 0000:00:1b.0: reg 0x10: [mem 0xfd8dc000-0xfd8dffff 64bit]
[ 0.476601] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.476772] pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400
[ 0.476897] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.477077] pci 0000:00:1c.1: [8086:3a42] type 01 class 0x060400
[ 0.477183] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.477364] pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
[ 0.477449] pci 0000:00:1d.0: reg 0x20: [io 0xef60-0xef7f]
[ 0.477633] pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
[ 0.477718] pci 0000:00:1d.1: reg 0x20: [io 0xef40-0xef5f]
[ 0.477908] pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
[ 0.477994] pci 0000:00:1d.2: reg 0x20: [io 0xef20-0xef3f]
[ 0.478218] pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
[ 0.478281] pci 0000:00:1d.7: reg 0x10: [mem 0xfd8d8000-0xfd8d83ff]
[ 0.478410] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.478576] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.478768] pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100
[ 0.478891] pci 0000:00:1f.0: quirk: [io 0x0500-0x057f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.478946] pci 0000:00:1f.0: quirk: [io 0x0580-0x05bf] claimed by ICH6 GPIO
[ 0.478997] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff)
[ 0.479184] pci 0000:00:1f.2: [8086:3a22] type 00 class 0x010601
[ 0.479243] pci 0000:00:1f.2: reg 0x10: [io 0xeef0-0xeef7]
[ 0.479296] pci 0000:00:1f.2: reg 0x14: [io 0xeee4-0xeee7]
[ 0.479348] pci 0000:00:1f.2: reg 0x18: [io 0xeee8-0xeeef]
[ 0.479400] pci 0000:00:1f.2: reg 0x1c: [io 0xeee0-0xeee3]
[ 0.479452] pci 0000:00:1f.2: reg 0x20: [io 0xef00-0xef1f]
[ 0.479504] pci 0000:00:1f.2: reg 0x24: [mem 0xfd8da000-0xfd8da7ff]
[ 0.479591] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.479742] pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500
[ 0.479805] pci 0000:00:1f.3: reg 0x10: [mem 0xfd8d7000-0xfd8d70ff 64bit]
[ 0.479872] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.480145] pci 0000:01:00.0: [1912:0015] type 00 class 0x0c0330
[ 0.480240] pci 0000:01:00.0: reg 0x10: [mem 0xfda00000-0xfda01fff 64bit]
[ 0.480570] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.480748] pci 0000:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x1 link at 0000:00:1c.0 (capable of 4.000 Gb/s with 5.0 GT/s PCIe x1 link)
[ 0.480993] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.481043] pci 0000:00:1c.0: bridge window [mem 0xfda00000-0xfdafffff]
[ 0.481178] pci 0000:02:00.0: [1106:3403] type 00 class 0x0c0010
[ 0.481250] pci 0000:02:00.0: reg 0x10: [mem 0xfd900000-0xfd9007ff 64bit]
[ 0.481309] pci 0000:02:00.0: reg 0x18: [io 0xf000-0xf0ff]
[ 0.481465] pci 0000:02:00.0: supports D2
[ 0.481507] pci 0000:02:00.0: PME# supported from D2 D3hot D3cold
[ 0.484128] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.484176] pci 0000:00:1c.1: bridge window [io 0xf000-0xffff]
[ 0.484225] pci 0000:00:1c.1: bridge window [mem 0xfd900000-0xfd9fffff]
[ 0.484294] pci_bus 0000:03: extended config space not accessible
[ 0.484465] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
[ 0.484523] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.484591] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.484659] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000c3fff window] (subtractive decode)
[ 0.484729] pci 0000:00:1e.0: bridge window [mem 0x000c8000-0x000fffff window] (subtractive decode)
[ 0.484799] pci 0000:00:1e.0: bridge window [mem 0x84000000-0xfebfffff window] (subtractive decode)
[ 0.484869] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode)
[ 0.485120] ACPI: PCI: Interrupt link LNKA configured for IRQ 11
[ 0.485232] ACPI: PCI: Interrupt link LNKB configured for IRQ 11
[ 0.485342] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[ 0.485451] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[ 0.485559] ACPI: PCI: Interrupt link LNKE configured for IRQ 11
[ 0.485674] ACPI: PCI: Interrupt link LNKF configured for IRQ 11
[ 0.485782] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[ 0.485890] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[ 0.486621] iommu: Default domain type: Translated
[ 0.486666] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.486900] SCSI subsystem initialized
[ 0.487003] libata version 3.00 loaded.
[ 0.487020] ACPI: bus type USB registered
[ 0.487089] usbcore: registered new interface driver usbfs
[ 0.487118] usbcore: registered new interface driver hub
[ 0.487172] usbcore: registered new device driver usb
[ 0.487242] pps_core: LinuxPPS API ver. 1 registered
[ 0.487286] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.487357] PTP clock support registered
[ 0.487464] EDAC MC: Ver: 3.0.0
[ 0.487992] PCI: Using ACPI for IRQ routing
[ 0.493841] PCI: pci_cache_line_size set to 64 bytes
[ 0.493949] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.493958] e820: reserve RAM buffer [mem 0x7f736000-0x7fffffff]
[ 0.494012] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.494059] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.494104] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.494111] vgaarb: loaded
[ 0.494271] hpet: 4 channels of 0 reserved for per-cpu timers
[ 0.494319] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.494368] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.496144] clocksource: Switched to clocksource tsc-early
[ 0.496361] VFS: Disk quotas dquot_6.6.0
[ 0.496424] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.496550] pnp: PnP ACPI init
[ 0.496706] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.496815] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.496865] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.496913] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.496961] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.497010] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.497645] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.497697] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.498031] system 00:02: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.498158] system 00:03: [io 0x0500-0x057f] has been reserved
[ 0.498206] system 00:03: [io 0x0580-0x05bf] has been reserved
[ 0.498700] system 00:05: [io 0x0a10-0x0a17] has been reserved
[ 0.498749] system 00:05: [io 0x0a00-0x0a03] has been reserved
[ 0.499181] pnp: PnP ACPI: found 9 devices
[ 0.506257] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.506430] NET: Registered PF_INET protocol family
[ 0.506771] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.509653] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 0.509804] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.509859] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.510078] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.510478] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.510709] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear)
[ 0.510812] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.510916] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.511086] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.511309] RPC: Registered named UNIX socket transport module.
[ 0.511355] RPC: Registered udp transport module.
[ 0.511398] RPC: Registered tcp transport module.
[ 0.511440] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.511487] NET: Registered PF_XDP protocol family
[ 0.511553] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.511603] pci 0000:00:1c.0: bridge window [mem 0xfda00000-0xfdafffff]
[ 0.511657] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.511708] pci 0000:00:1c.1: bridge window [io 0xf000-0xffff]
[ 0.511757] pci 0000:00:1c.1: bridge window [mem 0xfd900000-0xfd9fffff]
[ 0.511810] pci 0000:00:1e.0: PCI bridge to [bus 03]
[ 0.511862] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.511909] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.511956] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000c3fff window]
[ 0.512003] pci_bus 0000:00: resource 7 [mem 0x000c8000-0x000fffff window]
[ 0.512051] pci_bus 0000:00: resource 8 [mem 0x84000000-0xfebfffff window]
[ 0.512100] pci_bus 0000:00: resource 9 [mem 0xfed40000-0xfed44fff window]
[ 0.512148] pci_bus 0000:01: resource 1 [mem 0xfda00000-0xfdafffff]
[ 0.512195] pci_bus 0000:02: resource 0 [io 0xf000-0xffff]
[ 0.512240] pci_bus 0000:02: resource 1 [mem 0xfd900000-0xfd9fffff]
[ 0.512287] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window]
[ 0.512333] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window]
[ 0.512379] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000c3fff window]
[ 0.512427] pci_bus 0000:03: resource 7 [mem 0x000c8000-0x000fffff window]
[ 0.512476] pci_bus 0000:03: resource 8 [mem 0x84000000-0xfebfffff window]
[ 0.512523] pci_bus 0000:03: resource 9 [mem 0xfed40000-0xfed44fff window]
[ 0.514702] PCI: CLS 64 bytes, default 64
[ 0.514751] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.514834] software IO TLB: mapped [mem 0x000000007a4d0000-0x000000007e4d0000] (64MB)
[ 0.514952] Trying to unpack rootfs image as initramfs...
[ 0.521762] Initialise system trusted keyrings
[ 0.521827] Key type blacklist registered
[ 0.521913] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[ 0.524782] zbud: loaded
[ 0.525214] NFS: Registering the id_resolver key type
[ 0.525264] Key type id_resolver registered
[ 0.525305] Key type id_legacy registered
[ 0.525392] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.525446] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 0.525505] romfs: ROMFS MTD (C) 2007 Red Hat, Inc.
[ 0.539342] xor: measuring software checksum speed
[ 0.540289] prefetch64-sse : 10949 MB/sec
[ 0.541387] generic_sse : 9338 MB/sec
[ 0.541431] xor: using function: prefetch64-sse (10949 MB/sec)
[ 0.541477] async_tx: api initialized (async)
[ 0.541520] Key type asymmetric registered
[ 0.541562] Asymmetric key parser 'x509' registered
[ 0.541605] Running certificate verification selftests
[ 1.566123] tsc: Refined TSC clocksource calibration: 2833.288 MHz
[ 1.566184] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x28d716a0116, max_idle_ns: 440795224731 ns
[ 1.566286] clocksource: Switched to clocksource tsc
[ 3.350649] Freeing initrd memory: 18840K
[ 3.356447] Loaded X.509 cert 'Certificate verification self-testing key: f58703bb33ce1b73ee02eccdee5b8817518fe3db'
[ 3.361020] alg: self-tests for CTR-KDF (hmac(sha256)) passed
[ 3.361111] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[ 3.361217] io scheduler mq-deadline registered
[ 3.361525] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[ 3.361785] pcieport 0000:00:1c.0: PME: Signaling with IRQ 24
[ 3.362101] pcieport 0000:00:1c.1: PME: Signaling with IRQ 25
[ 3.362339] tsc: Marking TSC unstable due to TSC halts in idle
[ 3.362450] clocksource: Checking clocksource tsc synchronization from CPU 3 to CPUs 0-2.
[ 3.362541] clocksource: Switched to clocksource hpet
[ 3.365204] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 3.369656] brd: module loaded
[ 3.370212] ahci 0000:00:1f.2: version 3.0
[ 3.370409] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 3.370493] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 3.370546] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ccc
[ 3.371492] scsi host0: ahci
[ 3.371758] scsi host1: ahci
[ 3.371980] scsi host2: ahci
[ 3.372217] scsi host3: ahci
[ 3.372472] scsi host4: ahci
[ 3.372710] scsi host5: ahci
[ 3.372825] ata1: SATA max UDMA/133 abar m2048@0xfd8da000 port 0xfd8da100 irq 26
[ 3.372875] ata2: SATA max UDMA/133 abar m2048@0xfd8da000 port 0xfd8da180 irq 26
[ 3.372924] ata3: SATA max UDMA/133 abar m2048@0xfd8da000 port 0xfd8da200 irq 26
[ 3.372973] ata4: SATA max UDMA/133 abar m2048@0xfd8da000 port 0xfd8da280 irq 26
[ 3.373021] ata5: SATA max UDMA/133 abar m2048@0xfd8da000 port 0xfd8da300 irq 26
[ 3.373069] ata6: SATA max UDMA/133 abar m2048@0xfd8da000 port 0xfd8da380 irq 26
[ 3.374399] scsi host6: pata_legacy
[ 3.374498] ata7: PATA max PIO4 cmd 0x1f0 ctl 0x3f6 irq 14
[ 3.683316] ata1: SATA link down (SStatus 0 SControl 300)
[ 6.430147] floppy0: no floppy controllers found
[ 6.739315] ata2: SATA link down (SStatus 0 SControl 300)
[ 7.043315] ata3: SATA link down (SStatus 0 SControl 300)
[ 7.347314] ata4: SATA link down (SStatus 0 SControl 300)
[ 7.651314] ata5: SATA link down (SStatus 0 SControl 300)
[ 7.955319] ata6: SATA link down (SStatus 0 SControl 300)
[ 7.961442] scsi host6: pata_legacy
[ 7.961533] ata8: PATA max PIO4 cmd 0x170 ctl 0x376 irq 15
[ 8.124317] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 8.124741] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 8.124828] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 8.125004] mousedev: PS/2 mouse device common for all mice
[ 8.125101] rtc_cmos 00:04: RTC can wake from S4
[ 8.125426] rtc_cmos 00:04: registered as rtc0
[ 8.125490] rtc_cmos 00:04: alarms up to one month, 242 bytes nvram, hpet irqs
[ 8.125741] device-mapper: uevent: version 1.0.3
[ 8.125872] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com
[ 8.125926] intel_pstate: CPU model not supported
[ 8.126231] Initializing XFRM netlink socket
[ 8.126279] NET: Registered PF_PACKET protocol family
[ 8.126401] Key type dns_resolver registered
[ 8.126784] microcode: sig=0x1067a, pf=0x10, revision=0xa0b
[ 8.126850] microcode: Microcode Update Driver: v2.2.
[ 8.126856] IPI shorthand broadcast: enabled
[ 8.127234] registered taskstats version 1
[ 8.127283] Loading compiled-in X.509 certificates
[ 8.127463] zswap: loaded using pool lzo/zbud
[ 8.127717] Key type ._fscrypt registered
[ 8.127759] Key type .fscrypt registered
[ 8.127799] Key type fscrypt-provisioning registered
[ 8.131403] Key type encrypted registered
[ 8.136172] RAS: Correctable Errors collector initialized.
[ 8.142849] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 8.152878] Unstable clock detected, switching default tracing clock to "global"
If you want to keep using the local clock, then add:
"trace_clock=local"
on the kernel command line
[ 8.155193] Freeing unused decrypted memory: 2036K
[ 8.155882] Freeing unused kernel image (initmem) memory: 1900K
[ 8.160122] Write protecting the kernel read-only data: 22528k
[ 8.161275] Freeing unused kernel image (text/rodata gap) memory: 2036K
[ 8.162169] Freeing unused kernel image (rodata/data gap) memory: 1396K
[ 8.162259] rodata_test: all tests were successful
[ 8.162323] Run /init as init process
[ 8.162364] with arguments:
[ 8.162365] /init
[ 8.162367] with environment:
[ 8.162368] HOME=/
[ 8.162369] TERM=linux
[ 8.162370] BOOT_IMAGE=/boot/generic
[ 8.162372] kbd=us
[ 8.438117] random: crng init done
[ 8.451647] udevd[205]: starting eudev-3.2.11
[ 8.479089] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 8.493258] loop: module loaded
[ 8.511634] xhci_hcd 0000:01:00.0: failed to load firmware renesas_usb_fw.mem, fallback to ROM
[ 8.511897] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 8.512003] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
[ 8.517409] xhci_hcd 0000:01:00.0: hcc params 0x014051cf hci version 0x100 quirks 0x0000001100000090
[ 8.517947] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 8.518044] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
[ 8.518102] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
[ 8.520941] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.19
[ 8.520994] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.521043] usb usb1: Product: xHCI Host Controller
[ 8.521085] usb usb1: Manufacturer: Linux 5.19.17 xhci-hcd
[ 8.521142] usb usb1: SerialNumber: 0000:01:00.0
[ 8.521328] hub 1-0:1.0: USB hub found
[ 8.521439] hub 1-0:1.0: 2 ports detected
[ 8.521662] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 8.521749] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.19
[ 8.521803] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.521852] usb usb2: Product: xHCI Host Controller
[ 8.521898] usb usb2: Manufacturer: Linux 5.19.17 xhci-hcd
[ 8.521943] usb usb2: SerialNumber: 0000:01:00.0
[ 8.522134] hub 2-0:1.0: USB hub found
[ 8.522246] hub 2-0:1.0: 2 ports detected
[ 8.526260] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 8.528835] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 8.530909] ehci-pci: EHCI PCI platform driver
[ 8.531121] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 8.531230] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 3
[ 8.531297] ehci-pci 0000:00:1a.7: debug port 1
[ 8.535250] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfd8d9000
[ 8.542124] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 8.542306] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.19
[ 8.542359] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.542408] usb usb3: Product: EHCI Host Controller
[ 8.542451] usb usb3: Manufacturer: Linux 5.19.17 ehci_hcd
[ 8.542495] usb usb3: SerialNumber: 0000:00:1a.7
[ 8.542688] hub 3-0:1.0: USB hub found
[ 8.542745] hub 3-0:1.0: 6 ports detected
[ 8.543255] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 8.543389] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 4
[ 8.543451] ehci-pci 0000:00:1d.7: debug port 1
[ 8.547426] ehci-pci 0000:00:1d.7: irq 16, io mem 0xfd8d8000
[ 8.554123] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 8.554213] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.19
[ 8.554266] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.554314] usb usb4: Product: EHCI Host Controller
[ 8.554357] usb usb4: Manufacturer: Linux 5.19.17 ehci_hcd
[ 8.554401] usb usb4: SerialNumber: 0000:00:1d.7
[ 8.554588] hub 4-0:1.0: USB hub found
[ 8.554643] hub 4-0:1.0: 6 ports detected
[ 8.555281] ohci-pci: OHCI PCI platform driver
[ 8.559753] uhci_hcd: USB Universal Host Controller Interface driver
[ 8.559923] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 8.560031] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 5
[ 8.560117] uhci_hcd 0000:00:1a.0: irq 16, io port 0x0000efc0
[ 8.560232] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.19
[ 8.560286] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.560336] usb usb5: Product: UHCI Host Controller
[ 8.560382] usb usb5: Manufacturer: Linux 5.19.17 uhci_hcd
[ 8.560427] usb usb5: SerialNumber: 0000:00:1a.0
[ 8.560596] hub 5-0:1.0: USB hub found
[ 8.560651] hub 5-0:1.0: 2 ports detected
[ 8.561024] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 8.561155] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 6
[ 8.561244] uhci_hcd 0000:00:1a.1: irq 17, io port 0x0000efa0
[ 8.561356] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.19
[ 8.561410] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.561462] usb usb6: Product: UHCI Host Controller
[ 8.561508] usb usb6: Manufacturer: Linux 5.19.17 uhci_hcd
[ 8.561555] usb usb6: SerialNumber: 0000:00:1a.1
[ 8.561736] hub 6-0:1.0: USB hub found
[ 8.561794] hub 6-0:1.0: 2 ports detected
[ 8.562202] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 8.562367] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 7
[ 8.562445] uhci_hcd 0000:00:1a.2: irq 18, io port 0x0000ef80
[ 8.562560] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.19
[ 8.562621] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.562676] usb usb7: Product: UHCI Host Controller
[ 8.562729] usb usb7: Manufacturer: Linux 5.19.17 uhci_hcd
[ 8.562785] usb usb7: SerialNumber: 0000:00:1a.2
[ 8.563013] hub 7-0:1.0: USB hub found
[ 8.563068] hub 7-0:1.0: 2 ports detected
[ 8.563584] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 8.563691] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 8
[ 8.563771] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000ef60
[ 8.563883] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.19
[ 8.563938] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.563988] usb usb8: Product: UHCI Host Controller
[ 8.564032] usb usb8: Manufacturer: Linux 5.19.17 uhci_hcd
[ 8.564085] usb usb8: SerialNumber: 0000:00:1d.0
[ 8.564343] hub 8-0:1.0: USB hub found
[ 8.564399] hub 8-0:1.0: 2 ports detected
[ 8.564768] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 8.564901] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 9
[ 8.564979] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000ef40
[ 8.565098] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.19
[ 8.565172] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.565225] usb usb9: Product: UHCI Host Controller
[ 8.565278] usb usb9: Manufacturer: Linux 5.19.17 uhci_hcd
[ 8.565327] usb usb9: SerialNumber: 0000:00:1d.1
[ 8.565552] hub 9-0:1.0: USB hub found
[ 8.565609] hub 9-0:1.0: 2 ports detected
[ 8.565959] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 8.566088] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 10
[ 8.566186] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000ef20
[ 8.566342] usb usb10: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.19
[ 8.566400] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.566452] usb usb10: Product: UHCI Host Controller
[ 8.566502] usb usb10: Manufacturer: Linux 5.19.17 uhci_hcd
[ 8.566553] usb usb10: SerialNumber: 0000:00:1d.2
[ 8.566763] hub 10-0:1.0: USB hub found
[ 8.566820] hub 10-0:1.0: 2 ports detected
[ 8.582567] sdhci: Secure Digital Host Controller Interface driver
[ 8.582617] sdhci: Copyright(c) Pierre Ossman
[ 8.602843] usbcore: registered new interface driver usb-storage
[ 8.605376] usbcore: registered new interface driver uas
[ 8.609564] hid: raw HID events driver (C) Jiri Kosina
[ 8.612520] usbcore: registered new interface driver usbhid
[ 8.612571] usbhid: USB HID core driver
[ 8.730784] ntfs: driver 2.1.32 [Flags: R/W MODULE].
[ 8.753908] NET: Registered PF_ALG protocol family
[ 8.784127] usb 3-3: new high-speed USB device number 2 using ehci-pci
[ 8.928221] usb 3-3: New USB device found, idVendor=0781, idProduct=5581, bcdDevice= 1.00
[ 8.928275] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 8.928323] usb 3-3: Product: Ultra
[ 8.928364] usb 3-3: Manufacturer: SanDisk
[ 8.928405] usb 3-3: SerialNumber: 4C530001211202102191
[ 8.928768] usb-storage 3-3:1.0: USB Mass Storage device detected
[ 8.928993] scsi host6: usb-storage 3-3:1.0
[ 9.951737] scsi 6:0:0:0: Direct-Access SanDisk Ultra 1.00 PQ: 0 ANSI: 6
[ 9.952608] sd 6:0:0:0: [sda] 60062500 512-byte logical blocks: (30.8 GB/28.6 GiB)
[ 9.954354] sd 6:0:0:0: [sda] Write Protect is off
[ 9.954400] sd 6:0:0:0: [sda] Mode Sense: 43 00 00 00
[ 9.955357] sd 6:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 9.980005] sda: sda1 sda2 sda3
[ 9.980256] sd 6:0:0:0: [sda] Attached SCSI removable disk
[ 14.187008] EXT4-fs (sda3): INFO: recovery required on readonly filesystem
[ 14.187064] EXT4-fs (sda3): write access will be enabled during recovery
[ 14.466942] EXT4-fs (sda3): recovery complete
[ 14.469476] EXT4-fs (sda3): mounted filesystem with ordered data mode. Quota mode: none.
[ 15.528295] loop0: detected capacity change from 0 to 43128
[ 15.552145] /dev/loop0: Can't open blockdev
[ 15.574319] loop1: detected capacity change from 0 to 1189720
[ 15.583140] /dev/loop1: Can't open blockdev
[ 15.600690] loop2: detected capacity change from 0 to 412456
[ 15.613147] /dev/loop2: Can't open blockdev
[ 15.628297] loop3: detected capacity change from 0 to 1180024
[ 15.636143] /dev/loop3: Can't open blockdev
[ 15.653899] loop4: detected capacity change from 0 to 134336
[ 15.662146] /dev/loop4: Can't open blockdev
[ 15.676961] loop5: detected capacity change from 0 to 16112
[ 15.684145] /dev/loop5: Can't open blockdev
[ 15.698054] loop6: detected capacity change from 0 to 336080
[ 15.718138] /dev/loop6: Can't open blockdev
[ 15.734398] loop7: detected capacity change from 0 to 2445880
[ 15.745136] /dev/loop7: Can't open blockdev
[ 15.762138] loop8: detected capacity change from 0 to 1258568
[ 15.780144] /dev/loop8: Can't open blockdev
[ 15.803047] loop9: detected capacity change from 0 to 289216
[ 15.819162] /dev/loop9: Can't open blockdev
[ 15.885784] loop10: detected capacity change from 0 to 324528
[ 15.891161] /dev/loop10: Can't open blockdev
[ 15.973418] loop11: detected capacity change from 0 to 13328
[ 15.978141] /dev/loop11: Can't open blockdev
[ 16.045294] loop12: detected capacity change from 0 to 978720
[ 16.056150] /dev/loop12: Can't open blockdev
[ 16.080960] loop13: detected capacity change from 0 to 651160
[ 16.086168] /dev/loop13: Can't open blockdev
[ 16.162657] loop14: detected capacity change from 0 to 45864
[ 16.173142] /dev/loop14: Can't open blockdev
[ 16.248151] loop15: detected capacity change from 0 to 7960
[ 16.257147] /dev/loop15: Can't open blockdev
[ 16.286050] loop16: detected capacity change from 0 to 192
[ 16.292150] /dev/loop16: Can't open blockdev
[ 16.305781] loop17: detected capacity change from 0 to 7576
[ 16.322144] /dev/loop17: Can't open blockdev
[ 16.345456] loop18: detected capacity change from 0 to 16344
[ 16.352150] /dev/loop18: Can't open blockdev
[ 16.440901] EXT4-fs (sda3): re-mounted. Quota mode: none.
[ 18.032412] udevd[1189]: starting eudev-3.2.11
[ 18.202766] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 18.206149] ACPI: button: Power Button [PWRF]
[ 18.311823] Linux agpgart interface v0.103
[ 18.408918] e1000e: Intel(R) PRO/1000 Network Driver
[ 18.408970] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 18.409233] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 18.537162] firewire_ohci 0000:02:00.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
[ 18.566431] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:25:11:51:29:42
[ 18.566503] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 18.566568] e1000e 0000:00:19.0 eth0: MAC: 7, PHY: 8, PBA No: FFFFFF-0FF
[ 18.611211] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20220331/utaddress-204)
[ 18.611317] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[ 18.611365] ACPI Warning: SystemIO range 0x00000000000005B0-0x00000000000005BF conflicts with OpRegion 0x0000000000000580-0x00000000000005BB (\GPIO) (20220331/utaddress-204)
[ 18.611463] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[ 18.611510] ACPI Warning: SystemIO range 0x0000000000000580-0x00000000000005AF conflicts with OpRegion 0x0000000000000580-0x00000000000005BB (\GPIO) (20220331/utaddress-204)
[ 18.611606] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[ 18.611652] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 18.631179] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 18.677659] ACPI: bus type drm_connector registered
[ 18.967405] snd_hda_codec_realtek hdaudioC0D0: ALC888: SKU not ready 0x411111f0
[ 18.968120] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC888: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 18.968195] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 18.968248] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 18.968301] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 18.968349] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x1e
[ 18.968398] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 18.968444] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 18.968493] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 18.968542] snd_hda_codec_realtek hdaudioC0D0: Line=0x1c
[ 19.024665] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[ 19.024816] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 19.024947] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 19.025074] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 19.025250] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 19.025412] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 19.025595] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 19.025745] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 19.025887] input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 19.035774] intel_powerclamp: No package C-state available
[ 19.038220] firewire_core 0000:02:00.0: created device fw0: GUID 00001921ff3cf3ce, S400
[ 19.054472] intel_powerclamp: No package C-state available
[ 19.080294] intel_powerclamp: No package C-state available
[ 19.131331] intel_powerclamp: No package C-state available
[ 19.404328] pci 0000:00:00.0: Intel G45/G43 Chipset
[ 19.404410] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 19.405964] pci 0000:00:00.0: detected 65536K stolen memory
[ 19.408767] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 19.409449] Console: switching to colour dummy device 80x25
[ 19.443745] e1000e 0000:00:19.0 eth126: renamed from eth0
[ 19.450207] e1000e 0000:00:19.0 eth1: renamed from eth126
[ 19.461438] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 19.470857] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
[ 19.517318] fbcon: i915drmfb (fb0) is primary device
[ 19.539543] Console: switching to colour frame buffer device 240x75
[ 19.558618] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[ 19.831474] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input4
[ 21.134292] NET: Registered PF_INET6 protocol family
[ 21.139191] Segment Routing with IPv6
[ 21.139195] RPL Segment Routing with IPv6
[ 21.139206] In-situ OAM (IOAM) with IPv6
[ 28.355984] e1000e 0000:00:19.0 eth1: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 28.356156] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 30.242825] i915 0000:00:02.0: [drm] *ERROR* CPU pipe A FIFO underrun
[ 31.312813] fuse: init (API version 7.36)