| [ 0.000000] Initializing cgroup subsys cpuset |
| [ 0.000000] Initializing cgroup subsys cpu |
| [ 0.000000] Linux version 3.8.0-21-generic (buildd@allspice) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-1ubuntu1) ) #32-Ubuntu SMP Tue May 14 22:16:46 UTC 2013 (Ubuntu 3.8.0-21.32-generic 3.8.8) |
| [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.8.0-21-generic root=UUID=03d4f0d9-2880-48e2-a0fc-0591c740aa45 ro |
| [ 0.000000] KERNEL supported cpus: |
| [ 0.000000] Intel GenuineIntel |
| [ 0.000000] AMD AuthenticAMD |
| [ 0.000000] Centaur CentaurHauls |
| [ 0.000000] e820: BIOS-provided physical RAM map: |
| [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16 |
| [ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable |
| [ 0.000000] BIOS-e820: [mem 0x00000000000c0000-0x000000003ffcffff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000003ffd0000-0x000000003fffffff] type 16 |
| [ 0.000000] NX (Execute Disable) protection: active |
| [ 0.000000] SMBIOS 2.7 present. |
| [ 0.000000] DMI: ASUS A8N-E, BIOS 4.0-5356-g63e35f2 01/26/2014 |
| [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved |
| [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable |
| [ 0.000000] No AGP bridge found |
| [ 0.000000] e820: last_pfn = 0x3ffd0 max_arch_pfn = 0x400000000 |
| [ 0.000000] MTRR default type: uncachable |
| [ 0.000000] MTRR fixed ranges enabled: |
| [ 0.000000] 00000-9FFFF write-back |
| [ 0.000000] A0000-BFFFF uncachable |
| [ 0.000000] C0000-FFFFF write-back |
| [ 0.000000] MTRR variable ranges enabled: |
| [ 0.000000] 0 base 0000000000 mask FFC0000000 write-back |
| [ 0.000000] 1 disabled |
| [ 0.000000] 2 disabled |
| [ 0.000000] 3 disabled |
| [ 0.000000] 4 disabled |
| [ 0.000000] 5 disabled |
| [ 0.000000] 6 disabled |
| [ 0.000000] 7 disabled |
| [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 |
| [ 0.000000] found SMP MP-table at [mem 0x000f0400-0x000f040f] mapped at [ffff8800000f0400] |
| [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff] |
| [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 |
| [ 0.000000] init_memory_mapping: [mem 0x00000000-0x3ffcffff] |
| [ 0.000000] [mem 0x00000000-0x3fdfffff] page 2M |
| [ 0.000000] [mem 0x3fe00000-0x3ffcffff] page 4k |
| [ 0.000000] kernel direct mapping tables up to 0x3ffcffff @ [mem 0x1fffd000-0x1fffffff] |
| [ 0.000000] RAMDISK: [mem 0x35fea000-0x36fecfff] |
| [ 0.000000] ACPI: RSDP 00000000000f0800 00014 (v00 CORE ) |
| [ 0.000000] ACPI: RSDT 000000003ffe2630 00040 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: FACP 000000003ffe3e10 00074 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: DSDT 000000003ffe2740 016CC (v01 CORE CB-DSDT 00000001 INTL 20131218) |
| [ 0.000000] ACPI: FACS 000000003ffe2700 00040 |
| [ 0.000000] ACPI: MCFG 000000003ffe3f10 0002C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: HPET 000000003ffe3f40 00038 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: APIC 000000003ffe3f80 0005A (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SRAT 000000003ffe3fe0 00090 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SLIT 000000003ffe4070 0002D (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SSDT 000000003ffe40a0 00166 (v02 CORE COREBOOT 0000002A CORE 0000002A) |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0 |
| [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff] |
| [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0x3fffffff] |
| [ 0.000000] NUMA: Initialized distance table, cnt=1 |
| [ 0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0x3ffcffff] -> [mem 0x00000000-0x3ffcffff] |
| [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x3ffcffff] |
| [ 0.000000] NODE_DATA [mem 0x3ffca000-0x3ffcefff] |
| [ 0.000000] [ffffea0000000000-ffffea0000ffffff] PMD -> [ffff88003e600000-ffff88003f5fffff] on node 0 |
| [ 0.000000] Zone ranges: |
| [ 0.000000] DMA [mem 0x00010000-0x00ffffff] |
| [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] |
| [ 0.000000] Normal empty |
| [ 0.000000] Movable zone start for each node |
| [ 0.000000] Early memory node ranges |
| [ 0.000000] node 0: [mem 0x00010000-0x0009ffff] |
| [ 0.000000] node 0: [mem 0x00100000-0x3ffcffff] |
| [ 0.000000] On node 0 totalpages: 261984 |
| [ 0.000000] DMA zone: 64 pages used for memmap |
| [ 0.000000] DMA zone: 7 pages reserved |
| [ 0.000000] DMA zone: 3913 pages, LIFO batch:0 |
| [ 0.000000] DMA32 zone: 4032 pages used for memmap |
| [ 0.000000] DMA32 zone: 253968 pages, LIFO batch:31 |
| [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) |
| [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) |
| [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) |
| [ 0.000000] ACPI: IRQ0 used by override. |
| [ 0.000000] ACPI: IRQ2 used by override. |
| [ 0.000000] ACPI: IRQ9 used by override. |
| [ 0.000000] Using ACPI (MADT) for SMP configuration information |
| [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 |
| [ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs |
| [ 0.000000] nr_irqs_gsi: 40 |
| [ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000010000 |
| [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 |
| [ 0.000000] e820: [mem 0x40000000-0xffffffff] available for PCI devices |
| [ 0.000000] Booting paravirtualized kernel on bare hardware |
| [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:1 nr_node_ids:1 |
| [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88003fc00000 s85056 r8192 d21440 u2097152 |
| [ 0.000000] pcpu-alloc: s85056 r8192 d21440 u2097152 alloc=1*2097152 |
| [ 0.000000] pcpu-alloc: [0] 0 |
| [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 257881 |
| [ 0.000000] Policy zone: DMA32 |
| [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.8.0-21-generic root=UUID=03d4f0d9-2880-48e2-a0fc-0591c740aa45 ro |
| [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) |
| [ 0.000000] __ex_table already sorted, skipping sort |
| [ 0.000000] Checking aperture... |
| [ 0.000000] No AGP bridge found |
| [ 0.000000] Node 0: aperture @ f8000000 size 64 MB |
| [ 0.000000] Memory: 999224k/1048384k available (7006k kernel code, 448k absent, 48712k reserved, 6238k data, 992k init) |
| [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 |
| [ 0.000000] Hierarchical RCU implementation. |
| [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. |
| [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=1. |
| [ 0.000000] NR_IRQS:16640 nr_irqs:256 16 |
| [ 0.000000] Console: colour dummy device 80x25 |
| [ 0.000000] console [tty0] enabled |
| [ 0.000000] allocated 4194304 bytes of page_cgroup |
| [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups |
| [ 0.000000] hpet clockevent registered |
| [ 0.000000] tsc: Fast TSC calibration using PIT |
| [ 0.000000] tsc: Detected 2010.140 MHz processor |
| [ 0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 4020.28 BogoMIPS (lpj=8040560) |
| [ 0.004016] pid_max: default: 32768 minimum: 301 |
| [ 0.004061] Security Framework initialized |
| [ 0.004089] AppArmor: AppArmor initialized |
| [ 0.004093] Yama: becoming mindful. |
| [ 0.004296] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) |
| [ 0.005466] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) |
| [ 0.006039] Mount-cache hash table entries: 256 |
| [ 0.008017] spurious 8259A interrupt: IRQ7. |
| [ 0.008070] Initializing cgroup subsys cpuacct |
| [ 0.008078] Initializing cgroup subsys memory |
| [ 0.008098] Initializing cgroup subsys devices |
| [ 0.008104] Initializing cgroup subsys freezer |
| [ 0.008110] Initializing cgroup subsys blkio |
| [ 0.008115] Initializing cgroup subsys perf_event |
| [ 0.008123] Initializing cgroup subsys hugetlb |
| [ 0.008165] tseg: 0000000000 |
| [ 0.008189] mce: CPU supports 5 MCE banks |
| [ 0.008211] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4 |
| [ 0.008211] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4 |
| [ 0.008211] tlb_flushall_shift: 4 |
| [ 0.015616] Freeing SMP alternatives: 24k freed |
| [ 0.017840] ACPI: Core revision 20121018 |
| [ 0.018746] ftrace: allocating 26690 entries in 105 pages |
| [ 0.036384] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 |
| [ 0.040000] ..MP-BIOS bug: 8254 timer not connected to IO-APIC |
| [ 0.040000] ...trying to set up timer (IRQ0) through the 8259A ... |
| [ 0.040000] ..... (found apic 0 pin 0) ... |
| [ 0.079782] ....... works. |
| [ 0.079786] smpboot: CPU0: AMD Athlon(tm) 64 Processor 3200+ (fam: 0f, model: 1f, stepping: 00) |
| [ 0.080000] Performance Events: AMD PMU driver. |
| [ 0.080000] ... version: 0 |
| [ 0.080000] ... bit width: 48 |
| [ 0.080000] ... generic registers: 4 |
| [ 0.080000] ... value mask: 0000ffffffffffff |
| [ 0.080000] ... max period: 00007fffffffffff |
| [ 0.080000] ... fixed-purpose events: 0 |
| [ 0.080000] ... event mask: 000000000000000f |
| [ 0.080000] Brought up 1 CPUs |
| [ 0.080000] smpboot: Total of 1 processors activated (4020.28 BogoMIPS) |
| [ 0.080000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. |
| [ 0.080000] devtmpfs: initialized |
| [ 0.080212] EVM: security.selinux |
| [ 0.080216] EVM: security.SMACK64 |
| [ 0.080219] EVM: security.capability |
| [ 0.081836] regulator-dummy: no parameters |
| [ 0.081923] NET: Registered protocol family 16 |
| [ 0.082077] node 0 link 0: io port [1000, 2fff] |
| [ 0.082080] TOM: 0000000040000000 aka 1024M |
| [ 0.082087] node 0 link 0: mmio [fc000000, fc1fffff] |
| [ 0.082092] bus: [bus 00-05] on node 0 link 0 |
| [ 0.082094] bus: 00 [io 0x0000-0xffff] |
| [ 0.082096] bus: 00 [mem 0x40000000-0xfcffffffff] |
| [ 0.082155] ACPI: bus type pci registered |
| [ 0.082225] PCI: MMCONFIG has no entries |
| [ 0.082230] PCI: Using configuration type 1 for base access |
| [ 0.083427] bio: create slab <bio-0> at 0 |
| [ 0.083571] ACPI: Added _OSI(Module Device) |
| [ 0.083577] ACPI: Added _OSI(Processor Device) |
| [ 0.083582] ACPI: Added _OSI(3.0 _SCP Extensions) |
| [ 0.083588] ACPI: Added _OSI(Processor Aggregator Device) |
| [ 0.083903] ACPI: EC: Look up EC in DSDT |
| [ 0.084855] ACPI: Interpreter enabled |
| [ 0.084863] ACPI: (supports S0 S5) |
| [ 0.084878] ACPI: Using IOAPIC for interrupt routing |
| [ 0.084902] PCI: MMCONFIG has no entries |
| [ 0.086397] ACPI: No dock devices found. |
| [ 0.086406] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| [ 0.087539] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05]) |
| [ 0.087547] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] |
| [ 0.089859] pci_root PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. |
| [ 0.089903] PCI host bridge to bus 0000:00 |
| [ 0.089911] pci_bus 0000:00: root bus resource [bus 00-05] |
| [ 0.089918] pci_bus 0000:00: root bus resource [io 0x0d00-0x2fff] |
| [ 0.089925] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc1fffff] |
| [ 0.089933] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] |
| [ 0.089953] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000 |
| [ 0.090030] pci 0000:00:01.0: [10de:0050] type 00 class 0x060100 |
| [ 0.090037] pci 0000:00:01.0: reg 10: [io 0x2400-0x247f] |
| [ 0.090069] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500 |
| [ 0.090077] pci 0000:00:01.1: reg 10: [io 0x2800-0x281f] |
| [ 0.090090] pci 0000:00:01.1: reg 20: [io 0x2480-0x24bf] |
| [ 0.090095] pci 0000:00:01.1: reg 24: [io 0x24c0-0x24ff] |
| [ 0.090110] pci 0000:00:01.1: PME# supported from D3hot D3cold |
| [ 0.090128] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310 |
| [ 0.090136] pci 0000:00:02.0: reg 10: [mem 0xfc100000-0xfc100fff] |
| [ 0.090162] pci 0000:00:02.0: supports D1 D2 |
| [ 0.090165] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.090179] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320 |
| [ 0.090188] pci 0000:00:02.1: reg 10: [mem 0xfc105000-0xfc1050ff] |
| [ 0.090219] pci 0000:00:02.1: supports D1 D2 |
| [ 0.090222] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.090241] pci 0000:00:04.0: [10de:0059] type 00 class 0x040100 |
| [ 0.090249] pci 0000:00:04.0: reg 10: [io 0x1c00-0x1cff] |
| [ 0.090254] pci 0000:00:04.0: reg 14: [io 0x2000-0x20ff] |
| [ 0.090259] pci 0000:00:04.0: reg 18: [mem 0xfc101000-0xfc101fff] |
| [ 0.090281] pci 0000:00:04.0: supports D1 D2 |
| [ 0.090293] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a |
| [ 0.090310] pci 0000:00:06.0: reg 20: [io 0x2820-0x282f] |
| [ 0.090336] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185 |
| [ 0.090344] pci 0000:00:07.0: reg 10: [io 0x2850-0x2857] |
| [ 0.090349] pci 0000:00:07.0: reg 14: [io 0x2878-0x287b] |
| [ 0.090354] pci 0000:00:07.0: reg 18: [io 0x2858-0x285f] |
| [ 0.090359] pci 0000:00:07.0: reg 1c: [io 0x287c-0x287f] |
| [ 0.090365] pci 0000:00:07.0: reg 20: [io 0x2830-0x283f] |
| [ 0.090370] pci 0000:00:07.0: reg 24: [mem 0xfc102000-0xfc102fff] |
| [ 0.090393] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185 |
| [ 0.090401] pci 0000:00:08.0: reg 10: [io 0x2860-0x2867] |
| [ 0.090406] pci 0000:00:08.0: reg 14: [io 0x2880-0x2883] |
| [ 0.090411] pci 0000:00:08.0: reg 18: [io 0x2868-0x286f] |
| [ 0.090416] pci 0000:00:08.0: reg 1c: [io 0x2884-0x2887] |
| [ 0.090421] pci 0000:00:08.0: reg 20: [io 0x2840-0x284f] |
| [ 0.090427] pci 0000:00:08.0: reg 24: [mem 0xfc103000-0xfc103fff] |
| [ 0.090449] pci 0000:00:09.0: [10de:005c] type 01 class 0x060401 |
| [ 0.090480] pci 0000:00:0a.0: [10de:0057] type 00 class 0x068000 |
| [ 0.090489] pci 0000:00:0a.0: reg 10: [mem 0xfc104000-0xfc104fff] |
| [ 0.090494] pci 0000:00:0a.0: reg 14: [io 0x2870-0x2877] |
| [ 0.090524] pci 0000:00:0a.0: supports D1 D2 |
| [ 0.090526] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.090542] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400 |
| [ 0.090569] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.090584] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400 |
| [ 0.090611] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.090626] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400 |
| [ 0.090652] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.090667] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400 |
| [ 0.090693] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.090713] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000 |
| [ 0.090734] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000 |
| [ 0.090752] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000 |
| [ 0.090773] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000 |
| [ 0.090814] pci 0000:01:06.0: [1033:0035] type 00 class 0x0c0310 |
| [ 0.090826] pci 0000:01:06.0: reg 10: [mem 0xfc000000-0xfc000fff] |
| [ 0.090868] pci 0000:01:06.0: supports D1 D2 |
| [ 0.090871] pci 0000:01:06.0: PME# supported from D0 D1 D2 D3hot |
| [ 0.090887] pci 0000:01:06.1: [1033:0035] type 00 class 0x0c0310 |
| [ 0.090898] pci 0000:01:06.1: reg 10: [mem 0xfc001000-0xfc001fff] |
| [ 0.090940] pci 0000:01:06.1: supports D1 D2 |
| [ 0.090942] pci 0000:01:06.1: PME# supported from D0 D1 D2 D3hot |
| [ 0.090958] pci 0000:01:06.2: [1033:00e0] type 00 class 0x0c0320 |
| [ 0.090969] pci 0000:01:06.2: reg 10: [mem 0xfc002000-0xfc0020ff] |
| [ 0.091011] pci 0000:01:06.2: supports D1 D2 |
| [ 0.091014] pci 0000:01:06.2: PME# supported from D0 D1 D2 D3hot |
| [ 0.091043] pci 0000:00:09.0: PCI bridge to [bus 01] (subtractive decode) |
| [ 0.091052] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff] |
| [ 0.091057] pci 0000:00:09.0: bridge window [io 0x0d00-0x2fff] (subtractive decode) |
| [ 0.091060] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc1fffff] (subtractive decode) |
| [ 0.091062] pci 0000:00:09.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) |
| [ 0.091083] pci 0000:00:0b.0: PCI bridge to [bus 02] |
| [ 0.091109] pci 0000:00:0c.0: PCI bridge to [bus 03] |
| [ 0.091135] pci 0000:00:0d.0: PCI bridge to [bus 04] |
| [ 0.091160] pci 0000:00:0e.0: PCI bridge to [bus 05] |
| [ 0.091189] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIC._PRT] |
| [ 0.091215] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM |
| [ 0.091224] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08) |
| [ 0.092360] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled. |
| [ 0.092438] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled. |
| [ 0.092513] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled. |
| [ 0.092587] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled. |
| [ 0.092661] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled. |
| [ 0.092739] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled. |
| [ 0.092814] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 *21 22 23) |
| [ 0.092875] ACPI: PCI Interrupt Link [LUEH] (IRQs *20 21 22 23) |
| [ 0.092944] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 *22 23) |
| [ 0.093022] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled. |
| [ 0.093096] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled. |
| [ 0.093175] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 *23) |
| [ 0.093248] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 *22 23) |
| [ 0.093325] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 *23) |
| [ 0.093505] vgaarb: loaded |
| [ 0.093791] SCSI subsystem initialized |
| [ 0.093797] ACPI: bus type scsi registered |
| [ 0.093891] libata version 3.00 loaded. |
| [ 0.093918] ACPI: bus type usb registered |
| [ 0.093954] usbcore: registered new interface driver usbfs |
| [ 0.093968] usbcore: registered new interface driver hub |
| [ 0.094004] usbcore: registered new device driver usb |
| [ 0.094133] PCI: Using ACPI for IRQ routing |
| [ 0.094141] PCI: pci_cache_line_size set to 64 bytes |
| [ 0.094195] e820: reserve RAM buffer [mem 0x3ffd0000-0x3fffffff] |
| [ 0.094345] NetLabel: Initializing |
| [ 0.094351] NetLabel: domain hash size = 128 |
| [ 0.094355] NetLabel: protocols = UNLABELED CIPSOv4 |
| [ 0.094377] NetLabel: unlabeled traffic allowed by default |
| [ 0.094455] HPET: 3 timers in total, 0 timers will be used for per-cpu timer |
| [ 0.094464] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 |
| [ 0.094471] hpet0: 3 comparators, 32-bit 25.000000 MHz counter |
| [ 0.096072] Switching to clocksource hpet |
| [ 0.106442] AppArmor: AppArmor Filesystem Enabled |
| [ 0.106515] pnp: PnP ACPI init |
| [ 0.106548] ACPI: bus type pnp registered |
| [ 0.106859] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 (active) |
| [ 0.106912] pnp 00:01: Plug and Play ACPI device, IDs PNP0f13 (active) |
| [ 0.106958] pnp 00:02: Plug and Play ACPI device, IDs PNP0400 (active) |
| [ 0.106989] pnp 00:03: [dma 2] |
| [ 0.107009] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active) |
| [ 0.107014] pnp: PnP ACPI: found 4 devices |
| [ 0.107020] ACPI: ACPI bus type pnp unregistered |
| [ 0.113398] pci 0000:00:09.0: PCI bridge to [bus 01] |
| [ 0.113412] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff] |
| [ 0.113419] pci 0000:00:0b.0: PCI bridge to [bus 02] |
| [ 0.113427] pci 0000:00:0c.0: PCI bridge to [bus 03] |
| [ 0.113434] pci 0000:00:0d.0: PCI bridge to [bus 04] |
| [ 0.113441] pci 0000:00:0e.0: PCI bridge to [bus 05] |
| [ 0.113457] pci 0000:00:09.0: setting latency timer to 64 |
| [ 0.113467] pci_bus 0000:00: resource 4 [io 0x0d00-0x2fff] |
| [ 0.113470] pci_bus 0000:00: resource 5 [mem 0xfc000000-0xfc1fffff] |
| [ 0.113473] pci_bus 0000:00: resource 6 [io 0x0000-0x0cf7] |
| [ 0.113476] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff] |
| [ 0.113479] pci_bus 0000:01: resource 4 [io 0x0d00-0x2fff] |
| [ 0.113481] pci_bus 0000:01: resource 5 [mem 0xfc000000-0xfc1fffff] |
| [ 0.113484] pci_bus 0000:01: resource 6 [io 0x0000-0x0cf7] |
| [ 0.113559] NET: Registered protocol family 2 |
| [ 0.113775] TCP established hash table entries: 8192 (order: 5, 131072 bytes) |
| [ 0.113928] TCP bind hash table entries: 8192 (order: 5, 131072 bytes) |
| [ 0.114052] TCP: Hash tables configured (established 8192 bind 8192) |
| [ 0.114174] TCP: reno registered |
| [ 0.114181] UDP hash table entries: 512 (order: 2, 16384 bytes) |
| [ 0.114206] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) |
| [ 0.114306] NET: Registered protocol family 1 |
| [ 0.114559] ACPI: PCI Interrupt Link [LUOH] enabled at IRQ 21 |
| [ 0.114691] ACPI: PCI Interrupt Link [LUEH] enabled at IRQ 20 |
| [ 0.114752] pci 0000:00:00.0: Found disabled HT MSI Mapping |
| [ 0.114761] pci 0000:00:09.0: Enabling HT MSI Mapping |
| [ 0.114796] pci 0000:00:00.0: Found disabled HT MSI Mapping |
| [ 0.114806] pci 0000:00:0a.0: Enabling HT MSI Mapping |
| [ 0.114844] pci 0000:00:00.0: Found disabled HT MSI Mapping |
| [ 0.114853] pci 0000:00:0b.0: Enabling HT MSI Mapping |
| [ 0.114863] pci 0000:00:0b.0: Found enabled HT MSI Mapping |
| [ 0.114905] pci 0000:00:00.0: Found disabled HT MSI Mapping |
| [ 0.114914] pci 0000:00:0c.0: Enabling HT MSI Mapping |
| [ 0.114925] pci 0000:00:0c.0: Found enabled HT MSI Mapping |
| [ 0.114969] pci 0000:00:00.0: Found disabled HT MSI Mapping |
| [ 0.114978] pci 0000:00:0d.0: Enabling HT MSI Mapping |
| [ 0.114989] pci 0000:00:0d.0: Found enabled HT MSI Mapping |
| [ 0.115036] pci 0000:00:00.0: Found disabled HT MSI Mapping |
| [ 0.115045] pci 0000:00:0e.0: Enabling HT MSI Mapping |
| [ 0.115055] pci 0000:00:0e.0: Found enabled HT MSI Mapping |
| [ 0.115184] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 19 |
| [ 0.115300] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 18 |
| [ 0.115408] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 17 |
| [ 0.115431] PCI: CLS 64 bytes, default 64 |
| [ 0.115516] Trying to unpack rootfs image as initramfs... |
| [ 0.524283] Freeing initrd memory: 16396k freed |
| [ 0.542747] platform rtc_cmos: registered platform RTC device (no PNP device found) |
| [ 0.543058] Initialise module verification |
| [ 0.543128] audit: initializing netlink socket (disabled) |
| [ 0.543154] type=2000 audit(1390755856.540:1): initialized |
| [ 0.579736] HugeTLB registered 2 MB page size, pre-allocated 0 pages |
| [ 0.581976] VFS: Disk quotas dquot_6.5.2 |
| [ 0.582059] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) |
| [ 0.582843] fuse init (API version 7.20) |
| [ 0.582952] msgmni has been set to 1983 |
| [ 0.583389] Key type asymmetric registered |
| [ 0.583394] Asymmetric key parser 'x509' registered |
| [ 0.583446] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) |
| [ 0.583485] io scheduler noop registered |
| [ 0.583490] io scheduler deadline registered (default) |
| [ 0.583498] io scheduler cfq registered |
| [ 0.583747] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 |
| [ 0.583772] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 |
| [ 0.583920] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 |
| [ 0.583932] ACPI: Power Button [PWRF] |
| [ 0.585106] GHES: HEST is not enabled! |
| [ 0.585222] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled |
| [ 0.605558] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A |
| [ 0.607055] Linux agpgart interface v0.103 |
| [ 0.608807] brd: module loaded |
| [ 0.609712] loop: module loaded |
| [ 0.610280] libphy: Fixed MDIO Bus: probed |
| [ 0.610367] tun: Universal TUN/TAP device driver, 1.6 |
| [ 0.610373] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> |
| [ 0.610430] PPP generic driver version 2.4.2 |
| [ 0.610485] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| [ 0.610492] ehci-pci: EHCI PCI platform driver |
| [ 0.610555] ehci-pci 0000:00:02.1: setting latency timer to 64 |
| [ 0.610559] ehci-pci 0000:00:02.1: EHCI Host Controller |
| [ 0.610572] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1 |
| [ 0.610591] ehci-pci 0000:00:02.1: debug port 1 |
| [ 0.610624] ehci-pci 0000:00:02.1: cache line size of 64 is not supported |
| [ 0.610659] ehci-pci 0000:00:02.1: irq 20, io mem 0xfc105000 |
| [ 0.620027] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00 |
| [ 0.620080] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 |
| [ 0.620089] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 0.620097] usb usb1: Product: EHCI Host Controller |
| [ 0.620103] usb usb1: Manufacturer: Linux 3.8.0-21-generic ehci_hcd |
| [ 0.620111] usb usb1: SerialNumber: 0000:00:02.1 |
| [ 0.620231] hub 1-0:1.0: USB hub found |
| [ 0.620241] hub 1-0:1.0: 10 ports detected |
| [ 0.620456] ehci-pci 0000:01:06.2: EHCI Host Controller |
| [ 0.620466] ehci-pci 0000:01:06.2: new USB bus registered, assigned bus number 2 |
| [ 0.620514] ehci-pci 0000:01:06.2: irq 17, io mem 0xfc002000 |
| [ 0.632014] ehci-pci 0000:01:06.2: USB 2.0 started, EHCI 1.00 |
| [ 0.632040] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 |
| [ 0.632049] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 0.632057] usb usb2: Product: EHCI Host Controller |
| [ 0.632063] usb usb2: Manufacturer: Linux 3.8.0-21-generic ehci_hcd |
| [ 0.632070] usb usb2: SerialNumber: 0000:01:06.2 |
| [ 0.632171] hub 2-0:1.0: USB hub found |
| [ 0.632178] hub 2-0:1.0: 5 ports detected |
| [ 0.632322] ehci-platform: EHCI generic platform driver |
| [ 0.632338] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver |
| [ 0.632370] ohci_hcd 0000:00:02.0: setting latency timer to 64 |
| [ 0.632374] ohci_hcd 0000:00:02.0: OHCI Host Controller |
| [ 0.632388] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3 |
| [ 0.632422] ohci_hcd 0000:00:02.0: irq 21, io mem 0xfc100000 |
| [ 0.690010] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 |
| [ 0.690019] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 0.690027] usb usb3: Product: OHCI Host Controller |
| [ 0.690033] usb usb3: Manufacturer: Linux 3.8.0-21-generic ohci_hcd |
| [ 0.690040] usb usb3: SerialNumber: 0000:00:02.0 |
| [ 0.690145] hub 3-0:1.0: USB hub found |
| [ 0.690154] hub 3-0:1.0: 10 ports detected |
| [ 0.690334] ohci_hcd 0000:01:06.0: OHCI Host Controller |
| [ 0.690344] ohci_hcd 0000:01:06.0: new USB bus registered, assigned bus number 4 |
| [ 0.690374] ohci_hcd 0000:01:06.0: irq 19, io mem 0xfc000000 |
| [ 0.773788] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 |
| [ 0.773797] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 0.773805] usb usb4: Product: OHCI Host Controller |
| [ 0.773811] usb usb4: Manufacturer: Linux 3.8.0-21-generic ohci_hcd |
| [ 0.773818] usb usb4: SerialNumber: 0000:01:06.0 |
| [ 0.773915] hub 4-0:1.0: USB hub found |
| [ 0.773930] hub 4-0:1.0: 3 ports detected |
| [ 0.774037] ohci_hcd 0000:01:06.1: OHCI Host Controller |
| [ 0.774047] ohci_hcd 0000:01:06.1: new USB bus registered, assigned bus number 5 |
| [ 0.774077] ohci_hcd 0000:01:06.1: irq 18, io mem 0xfc001000 |
| [ 0.857782] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 |
| [ 0.857789] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 0.857794] usb usb5: Product: OHCI Host Controller |
| [ 0.857799] usb usb5: Manufacturer: Linux 3.8.0-21-generic ohci_hcd |
| [ 0.857804] usb usb5: SerialNumber: 0000:01:06.1 |
| [ 0.857897] hub 5-0:1.0: USB hub found |
| [ 0.857906] hub 5-0:1.0: 2 ports detected |
| [ 0.857995] uhci_hcd: USB Universal Host Controller Interface driver |
| [ 0.858086] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 |
| [ 0.860708] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| [ 0.860717] serio: i8042 AUX port at 0x60,0x64 irq 12 |
| [ 0.860809] mousedev: PS/2 mouse device common for all mice |
| [ 0.860910] rtc_cmos rtc_cmos: RTC can wake from S4 |
| [ 0.881191] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 |
| [ 0.881222] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs |
| [ 0.881362] device-mapper: uevent: version 1.0.3 |
| [ 0.881445] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com |
| [ 0.881464] cpuidle: using governor ladder |
| [ 0.881469] cpuidle: using governor menu |
| [ 0.881475] ledtrig-cpu: registered to indicate activity on CPUs |
| [ 0.881482] EFI Variables Facility v0.08 2004-May-17 |
| [ 0.881762] ashmem: initialized |
| [ 0.881916] TCP: cubic registered |
| [ 0.882045] NET: Registered protocol family 10 |
| [ 0.882309] NET: Registered protocol family 17 |
| [ 0.882329] Key type dns_resolver registered |
| [ 0.882532] Loading module verification certificates |
| [ 0.883936] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: da639d7d39047796a6cdf66158dce65752f170ea' |
| [ 0.883970] registered taskstats version 1 |
| [ 0.887556] Key type trusted registered |
| [ 0.890770] Key type encrypted registered |
| [ 0.894273] rtc_cmos rtc_cmos: setting system clock to 2014-01-26 17:04:18 UTC (1390755858) |
| [ 0.894555] [Firmware Bug]: powernow-k8: No PSB or ACPI _PSS objects |
| [ 0.894561] powernow-k8: Make sure that your BIOS is up to date and Cool'N'Quiet support is enabled in BIOS setup |
| [ 0.894591] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found |
| [ 0.894595] EDD information not available. |
| [ 0.896833] Freeing unused kernel memory: 992k freed |
| [ 0.897735] Write protecting the kernel read-only data: 12288k |
| [ 0.902561] Freeing unused kernel memory: 1176k freed |
| [ 0.904044] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 |
| [ 0.909525] Freeing unused kernel memory: 1080k freed |
| [ 0.934680] udevd[88]: starting version 175 |
| [ 0.936095] usb 1-3: new high-speed USB device number 2 using ehci-pci |
| [ 1.069567] usb 1-3: New USB device found, idVendor=0525, idProduct=127a |
| [ 1.069585] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [ 1.069591] usb 1-3: Product: Ajays USB 2.0 Debug Cable |
| [ 1.069595] usb 1-3: Manufacturer: Ajays Technology |
| [ 1.069600] usb 1-3: SerialNumber: Ajays002 |
| [ 1.102986] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. |
| [ 1.116072] forcedeth 0000:00:0a.0: enabling device (0000 -> 0003) |
| [ 1.116279] ACPI: PCI Interrupt Link [LEMA] enabled at IRQ 23 |
| [ 1.116316] forcedeth 0000:00:0a.0: setting latency timer to 64 |
| [ 1.118577] Disabling lock debugging due to kernel taint |
| [ 1.163973] FDC 0 is a post-1991 82077 |
| [ 1.180092] usb 2-2: new high-speed USB device number 2 using ehci-pci |
| [ 1.323972] usb 2-2: New USB device found, idVendor=13fe, idProduct=4100 |
| [ 1.323987] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [ 1.323993] usb 2-2: Product: USB DISK 2.0 |
| [ 1.323998] usb 2-2: Manufacturer: |
| [ 1.324009] usb 2-2: SerialNumber: 0701392CAF3D5516 |
| [ 1.328613] Initializing USB Mass Storage driver... |
| [ 1.328800] scsi0 : usb-storage 2-2:1.0 |
| [ 1.329152] usbcore: registered new interface driver usb-storage |
| [ 1.329159] USB Mass Storage support registered. |
| [ 1.540027] tsc: Refined TSC clocksource calibration: 2010.302 MHz |
| [ 1.540045] Switching to clocksource tsc |
| [ 1.640521] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 66:32:54:81:e0:00 |
| [ 1.640530] forcedeth 0000:00:0a.0: highdma csum gbit lnktim desc-v3 |
| [ 1.641047] pata_amd 0000:00:06.0: version 0.4.1 |
| [ 1.641106] pata_amd 0000:00:06.0: setting latency timer to 64 |
| [ 1.642374] scsi1 : pata_amd |
| [ 1.642539] scsi2 : pata_amd |
| [ 1.642586] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x2820 irq 14 |
| [ 1.642592] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x2828 irq 15 |
| [ 1.644287] sata_nv 0000:00:07.0: version 3.5 |
| [ 1.644482] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 22 |
| [ 1.644577] sata_nv 0000:00:07.0: setting latency timer to 64 |
| [ 1.645830] scsi3 : sata_nv |
| [ 1.646024] scsi4 : sata_nv |
| [ 1.646071] ata3: SATA max UDMA/133 cmd 0x2850 ctl 0x2878 bmdma 0x2830 irq 22 |
| [ 1.646078] ata4: SATA max UDMA/133 cmd 0x2858 ctl 0x287c bmdma 0x2838 irq 22 |
| [ 1.646320] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 22 |
| [ 1.646392] sata_nv 0000:00:08.0: setting latency timer to 64 |
| [ 1.646768] scsi5 : sata_nv |
| [ 1.646885] scsi6 : sata_nv |
| [ 1.646934] ata5: SATA max UDMA/133 cmd 0x2860 ctl 0x2880 bmdma 0x2840 irq 22 |
| [ 1.646939] ata6: SATA max UDMA/133 cmd 0x2868 ctl 0x2884 bmdma 0x2848 irq 22 |
| [ 1.956016] ata3: SATA link down (SStatus 0 SControl 300) |
| [ 2.120014] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) |
| [ 2.128267] ata5.00: ATA-8: HGST HTS725050A7E630, GH2ZB550, max UDMA/133 |
| [ 2.128274] ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) |
| [ 2.144241] ata5.00: configured for UDMA/133 |
| [ 2.284008] ata4: SATA link down (SStatus 0 SControl 300) |
| [ 2.284180] scsi 5:0:0:0: Direct-Access ATA HGST HTS725050A7 GH2Z PQ: 0 ANSI: 5 |
| [ 2.285455] sd 5:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) |
| [ 2.285468] sd 5:0:0:0: [sda] 4096-byte physical blocks |
| [ 2.285522] sd 5:0:0:0: [sda] Write Protect is off |
| [ 2.285528] sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00 |
| [ 2.285552] sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 2.285895] sd 5:0:0:0: Attached scsi generic sg0 type 0 |
| [ 2.330313] scsi 0:0:0:0: Direct-Access USB DISK 2.0 PMAP PQ: 0 ANSI: 4 |
| [ 2.331090] sd 0:0:0:0: Attached scsi generic sg1 type 0 |
| [ 2.356061] sda: sda1 sda2 sda3 sda4 sda5 |
| [ 2.356565] sd 5:0:0:0: [sda] Attached SCSI disk |
| [ 2.596067] ata6: SATA link down (SStatus 0 SControl 300) |
| [ 2.666753] EXT4-fs (sda4): INFO: recovery required on readonly filesystem |
| [ 2.666770] EXT4-fs (sda4): write access will be enabled during recovery |
| [ 3.000039] EXT4-fs (sda4): recovery complete |
| [ 3.008251] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null) |
| [ 6.369342] sd 0:0:0:0: [sdb] 60604416 512-byte logical blocks: (31.0 GB/28.8 GiB) |
| [ 6.371701] sd 0:0:0:0: [sdb] Write Protect is off |
| [ 6.371708] sd 0:0:0:0: [sdb] Mode Sense: 23 00 00 00 |
| [ 6.373452] sd 0:0:0:0: [sdb] No Caching mode page present |
| [ 6.373458] sd 0:0:0:0: [sdb] Assuming drive cache: write through |
| [ 6.382451] sd 0:0:0:0: [sdb] No Caching mode page present |
| [ 6.382457] sd 0:0:0:0: [sdb] Assuming drive cache: write through |
| [ 6.385717] sdb: sdb1 |
| [ 6.393076] sd 0:0:0:0: [sdb] No Caching mode page present |
| [ 6.393083] sd 0:0:0:0: [sdb] Assuming drive cache: write through |
| [ 6.393088] sd 0:0:0:0: [sdb] Attached SCSI removable disk |
| [ 7.306249] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready |
| [ 7.368985] udevd[318]: starting version 175 |
| [ 7.489524] lp: driver loaded but no devices found |
| [ 7.637761] EXT4-fs (sda4): re-mounted. Opts: errors=remount-ro |
| [ 7.759956] i2c i2c-0: nForce2 SMBus adapter at 0x2480 |
| [ 7.759985] i2c i2c-1: nForce2 SMBus adapter at 0x24c0 |
| [ 7.952492] parport_pc 00:02: reported by Plug and Play ACPI |
| [ 7.952521] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] |
| [ 8.097305] lp0: using parport0 (interrupt-driven). |
| [ 8.437393] type=1400 audit(1390755866.040:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=569 comm="apparmor_parser" |
| [ 8.445613] type=1400 audit(1390755866.048:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=569 comm="apparmor_parser" |
| [ 8.445953] type=1400 audit(1390755866.048:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=569 comm="apparmor_parser" |
| [ 8.525645] Bluetooth: Core ver 2.16 |
| [ 8.525690] NET: Registered protocol family 31 |
| [ 8.525693] Bluetooth: HCI device and connection manager initialized |
| [ 8.525707] Bluetooth: HCI socket layer initialized |
| [ 8.525711] Bluetooth: L2CAP socket layer initialized |
| [ 8.525728] Bluetooth: SCO socket layer initialized |
| [ 8.566350] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 |
| [ 8.566358] Bluetooth: BNEP filters: protocol multicast |
| [ 8.566375] Bluetooth: BNEP socket layer initialized |
| [ 8.576808] Bluetooth: RFCOMM TTY layer initialized |
| [ 8.576831] Bluetooth: RFCOMM socket layer initialized |
| [ 8.576833] Bluetooth: RFCOMM ver 1.11 |
| [ 8.648851] usbcore: registered new interface driver usbserial |
| [ 8.655854] usbcore: registered new interface driver usbserial_generic |
| [ 8.670631] usbserial: USB Serial support registered for generic |
| [ 8.699713] init: avahi-cups-reload main process (593) terminated with status 1 |
| [ 8.734543] usbcore: registered new interface driver usb_debug |
| [ 8.735765] usbserial: USB Serial support registered for debug |
| [ 8.735800] usb_debug 1-3:1.0: debug converter detected |
| [ 8.736522] ppdev: user-space parallel port driver |
| [ 8.742872] MCE: In-kernel MCE decoding enabled. |
| [ 8.748121] usb 1-3: debug converter now attached to ttyUSB0 |
| [ 8.773991] type=1400 audit(1390755866.376:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=608 comm="apparmor_parser" |
| [ 8.779938] type=1400 audit(1390755866.380:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=608 comm="apparmor_parser" |
| [ 8.813234] EDAC MC: Ver: 3.0.0 |
| [ 8.850893] AMD64 EDAC driver v3.4.0 |
| [ 8.850961] EDAC amd64: DRAM ECC disabled. |
| [ 8.850966] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. |
| [ 8.850966] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. |
| [ 8.850966] (Note that use of the override may cause unknown side effects.) |
| [ 8.970227] microcode: AMD CPU family 0xf not supported |
| [ 9.226699] ACPI: PCI Interrupt Link [LAUD] enabled at IRQ 23 |
| [ 9.226741] snd_intel8x0 0000:00:04.0: setting latency timer to 64 |
| [ 9.572052] intel8x0_measure_ac97_clock: measured 53465 usecs (2624 samples) |
| [ 9.572058] intel8x0: clocking to 46945 |
| [ 9.784250] init: failsafe main process (699) killed by TERM signal |
| [ 9.966037] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input2 |
| [ 10.206112] type=1400 audit(1390755867.808:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=814 comm="apparmor_parser" |
| [ 10.206587] type=1400 audit(1390755867.808:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=814 comm="apparmor_parser" |
| [ 10.227395] type=1400 audit(1390755867.828:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=817 comm="apparmor_parser" |
| [ 10.227862] type=1400 audit(1390755867.828:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper//chromium_browser" pid=817 comm="apparmor_parser" |
| [ 10.243665] type=1400 audit(1390755867.844:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=818 comm="apparmor_parser" |
| [ 11.484545] init: udev-fallback-graphics main process (975) terminated with status 1 |
| [ 11.877024] init: plymouth-splash main process (1079) terminated with status 1 |
| [ 12.626135] init: lightdm main process (982) terminated with status 1 |
| [ 12.644473] init: plymouth-ready (startup) main process (230) terminated with status 1 |
| [ 12.686103] init: plymouth-stop pre-start process (1312) terminated with status 1 |
| [ 31.560111] init: failsafe-x main process (1525) terminated with status 1 |