blob: e914e1b11f0825a342b2837412690660e61ecea0 [file] [log] [blame]
[ 0.000000] Linux version 4.12.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 6.4.0 20170805 (Debian 6.4.0-3) ) #1 SMP Debian 4.12.6-1 (2017-08-12)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.12.0-1-amd64 root=UUID=f545d1ea-3103-4100-8a85-54db5c9634ad ro quiet iomem=relaxed
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16
[ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007feeffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007fef0000-0x000000007fffffff] type 16
[ 0.000000] BIOS-e820: [mem 0x0000000080000000-0x000000008e9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000002715fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: LENOVO 23539LU/23539LU, BIOS CBET4000 4.6-1360-g2997a97a3a 09/06/2017
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x271600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-back
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 080000000 mask FC0000000 uncachable
[ 0.000000] 1 base 0C0000000 mask FE0000000 uncachable
[ 0.000000] 2 base 0E0000000 mask FF0000000 write-combining
[ 0.000000] 3 base 0F0000000 mask FF0000000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: last_pfn = 0x7fef0 max_arch_pfn = 0x400000000
[ 0.000000] Base memory trampoline at [ffff896f40099000] 99000 size 24576
[ 0.000000] BRK [0x189554000, 0x189554fff] PGTABLE
[ 0.000000] BRK [0x189555000, 0x189555fff] PGTABLE
[ 0.000000] BRK [0x189556000, 0x189556fff] PGTABLE
[ 0.000000] BRK [0x189557000, 0x189557fff] PGTABLE
[ 0.000000] BRK [0x189558000, 0x189558fff] PGTABLE
[ 0.000000] BRK [0x189559000, 0x189559fff] PGTABLE
[ 0.000000] BRK [0x18955a000, 0x18955afff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x356f7000-0x36b72fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F2030 000024 (v02 CORE )
[ 0.000000] ACPI: XSDT 0x000000007FF020E0 00005C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: FACP 0x000000007FF057E0 0000F4 (v04 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: DSDT 0x000000007FF02280 00355B (v02 COREv4 COREBOOT 20110725 INTL 20161222)
[ 0.000000] ACPI: FACS 0x000000007FF02240 000040
[ 0.000000] ACPI: FACS 0x000000007FF02240 000040
[ 0.000000] ACPI: SSDT 0x000000007FF058E0 0018AD (v02 CORE COREBOOT 0000002A CORE 0000002A)
[ 0.000000] ACPI: MCFG 0x000000007FF07190 00003C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: TCPA 0x000000007FF071D0 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: APIC 0x000000007FF07210 00006C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: DMAR 0x000000007FF07280 0000A8 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: HPET 0x000000007FF07330 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000002715fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x2715f6000-0x2715fafff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x00000002715fffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009ffff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000007feeffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x00000002715fffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000002715fffff]
[ 0.000000] On node 0 totalpages: 2036879
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 22 pages reserved
[ 0.000000] DMA zone: 3999 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 8124 pages used for memmap
[ 0.000000] DMA32 zone: 519920 pages, LIFO batch:31
[ 0.000000] Normal zone: 23640 pages used for memmap
[ 0.000000] Normal zone: 1512960 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics memory at 0x0000000080a00000-0x000000008e9fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x508
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7fef0000-0x7fffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x80000000-0x8e9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8ea00000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfed3ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed8ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfed91fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed92000-0xffffffff]
[ 0.000000] e820: [mem 0x8ea00000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 38 pages/cpu @ffff8971b1200000 s114776 r8192 d32680 u524288
[ 0.000000] pcpu-alloc: s114776 r8192 d32680 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2005029
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.12.0-1-amd64 root=UUID=f545d1ea-3103-4100-8a85-54db5c9634ad ro quiet iomem=relaxed
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 7915028K/8147516K available (6481K kernel code, 1145K rwdata, 2908K rodata, 1468K init, 704K bss, 232488K reserved, 0K cma-reserved)
[ 0.000000] ftrace: allocating 28155 entries in 110 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:33024 nr_irqs:456 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 2593.987 MHz processor
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5187.97 BogoMIPS (lpj=10375948)
[ 0.004000] pid_max: default: 32768 minimum: 301
[ 0.004000] ACPI: Core revision 20170303
[ 0.009252] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.009291] Security Framework initialized
[ 0.009293] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.009298] AppArmor: AppArmor disabled by boot time parameter
[ 0.009642] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.011535] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.012418] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.012424] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.012660] CPU: Physical Processor ID: 0
[ 0.012661] CPU: Processor Core ID: 0
[ 0.012668] mce: CPU supports 7 MCE banks
[ 0.012675] CPU0: Thermal monitoring enabled (TM1)
[ 0.012683] process: using mwait in idle threads
[ 0.012686] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.012687] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.012794] Freeing SMP alternatives memory: 24K
[ 0.013978] smpboot: Max logical packages: 2
[ 0.013982] DMAR: Host address width 36
[ 0.013984] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.013992] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[ 0.013992] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.013995] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[ 0.013997] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.013998] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.013999] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.014350] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.014351] x2apic enabled
[ 0.014356] Switched APIC routing to cluster x2apic.
[ 0.014806] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.054506] TSC deadline timer enabled
[ 0.054509] smpboot: CPU0: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[ 0.054582] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.054601] ... version: 3
[ 0.054602] ... bit width: 48
[ 0.054602] ... generic registers: 4
[ 0.054603] ... value mask: 0000ffffffffffff
[ 0.054604] ... max period: 00007fffffffffff
[ 0.054604] ... fixed-purpose events: 3
[ 0.054604] ... event mask: 000000070000000f
[ 0.055076] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.055092] smp: Bringing up secondary CPUs ...
[ 0.055176] x86: Booting SMP configuration:
[ 0.055177] .... node #0, CPUs: #1 #2 #3
[ 0.294020] smp: Brought up 1 node, 4 CPUs
[ 0.294020] smpboot: Total of 4 processors activated (20755.50 BogoMIPS)
[ 0.296109] sched_clock: Marking stable (296000000, 0)->(292343924, 3656076)
[ 0.296382] devtmpfs: initialized
[ 0.296431] x86/mm: Memory block size: 128MB
[ 0.298904] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.298911] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.298956] pinctrl core: initialized pinctrl subsystem
[ 0.299050] NET: Registered protocol family 16
[ 0.299215] cpuidle: using governor ladder
[ 0.299246] cpuidle: using governor menu
[ 0.299247] PCCT header not found.
[ 0.299269] ACPI: bus type PCI registered
[ 0.299271] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.299321] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.299323] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.299330] PCI: Using configuration type 1 for base access
[ 0.299363] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.300163] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.300341] ACPI: Added _OSI(Module Device)
[ 0.300342] ACPI: Added _OSI(Processor Device)
[ 0.300343] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.300343] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.300460] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.302397] ACPI : EC: EC started
[ 0.302398] ACPI : EC: interrupt blocked
[ 0.302440] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
[ 0.302441] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.302442] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions
[ 0.302443] ACPI: Interpreter enabled
[ 0.302459] ACPI: (supports S0 S3 S4 S5)
[ 0.302459] ACPI: Using IOAPIC for interrupt routing
[ 0.302476] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.306769] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.306773] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.306817] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.306825] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.306870] acpi PNP0A08:00: ignoring host bridge window [mem 0x000c4000-0x000c7fff window] (conflicts with Video ROM [mem 0x000c0000-0x000c67ff])
[ 0.307004] PCI host bridge to bus 0000:00
[ 0.307006] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.307007] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.307008] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.307009] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.307010] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.307011] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.307012] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.307013] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.307014] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.307015] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.307016] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.307017] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.307018] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.307020] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.307021] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[ 0.307022] pci_bus 0000:00: root bus resource [mem 0x8ea00001-0xf7ffffff window]
[ 0.307023] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[ 0.307024] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.307031] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.307108] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[ 0.307136] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.307192] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 0.307201] pci 0000:00:02.0: reg 0x10: [mem 0xf1400000-0xf17fffff 64bit]
[ 0.307206] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.307211] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
[ 0.307276] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000
[ 0.307284] pci 0000:00:04.0: reg 0x10: [mem 0xf1930000-0xf1937fff 64bit]
[ 0.307369] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.307390] pci 0000:00:14.0: reg 0x10: [mem 0xf1920000-0xf192ffff 64bit]
[ 0.307457] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.307490] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.307523] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[ 0.307538] pci 0000:00:19.0: reg 0x10: [mem 0xf1900000-0xf191ffff]
[ 0.307546] pci 0000:00:19.0: reg 0x14: [mem 0xf193c000-0xf193cfff]
[ 0.307555] pci 0000:00:19.0: reg 0x18: [io 0x3040-0x305f]
[ 0.307613] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.307672] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.307690] pci 0000:00:1a.0: reg 0x10: [mem 0xf193e000-0xf193e3ff]
[ 0.307771] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.307805] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.307837] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.307854] pci 0000:00:1b.0: reg 0x10: [mem 0xf1938000-0xf193bfff 64bit]
[ 0.307925] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.307962] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.307997] pci 0000:00:1c.0: [8086:1e12] type 01 class 0x060400
[ 0.308128] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.308210] pci 0000:00:1c.1: [8086:1e14] type 01 class 0x060400
[ 0.308339] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.308418] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.308435] pci 0000:00:1d.0: reg 0x10: [mem 0xf193f000-0xf193f3ff]
[ 0.308517] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.308551] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.308580] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100
[ 0.308734] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.308750] pci 0000:00:1f.2: reg 0x10: [io 0x3080-0x3087]
[ 0.308757] pci 0000:00:1f.2: reg 0x14: [io 0x3090-0x3093]
[ 0.308765] pci 0000:00:1f.2: reg 0x18: [io 0x3088-0x308f]
[ 0.308774] pci 0000:00:1f.2: reg 0x1c: [io 0x3094-0x3097]
[ 0.308782] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
[ 0.308790] pci 0000:00:1f.2: reg 0x24: [mem 0xf193d000-0xf193d7ff]
[ 0.308833] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.308889] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.308905] pci 0000:00:1f.3: reg 0x10: [mem 0xf1940000-0xf19400ff 64bit]
[ 0.308925] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.309013] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.309102] pci 0000:02:00.0: [168c:0030] type 00 class 0x028000
[ 0.309148] pci 0000:02:00.0: reg 0x10: [mem 0xf1800000-0xf181ffff 64bit]
[ 0.309232] pci 0000:02:00.0: reg 0x30: [mem 0xf1820000-0xf182ffff pref]
[ 0.309375] pci 0000:02:00.0: supports D1
[ 0.309376] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
[ 0.321361] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.321367] pci 0000:00:1c.0: bridge window [mem 0xf1800000-0xf18fffff]
[ 0.321557] pci 0000:03:00.0: [1180:e823] type 00 class 0x080500
[ 0.321597] pci 0000:03:00.0: MMC controller base frequency changed to 50Mhz.
[ 0.321633] pci 0000:03:00.0: reg 0x10: [mem 0xf0800000-0xf08000ff]
[ 0.321942] pci 0000:03:00.0: supports D1 D2
[ 0.321943] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.333561] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.333565] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 0.333568] pci 0000:00:1c.1: bridge window [mem 0xf0000000-0xf08fffff]
[ 0.333576] pci 0000:00:1c.1: bridge window [mem 0xf0c00000-0xf13fffff 64bit pref]
[ 0.333684] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 12 14 15) *11
[ 0.333731] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.333773] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12 14 15) *11
[ 0.333815] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.333856] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12 14 15) *11
[ 0.333897] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.333938] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12 14 15) *11
[ 0.333979] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.334519] ACPI: Enabled 1 GPEs in block 00 to 3F
[ 0.334602] ACPI : EC: interrupt unblocked
[ 0.334608] ACPI : EC: event unblocked
[ 0.334615] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.334616] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
[ 0.334686] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.334688] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.334691] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.334691] vgaarb: loaded
[ 0.334729] EDAC MC: Ver: 3.0.0
[ 0.335047] PCI: Using ACPI for IRQ routing
[ 0.336519] PCI: pci_cache_line_size set to 64 bytes
[ 0.336665] e820: reserve RAM buffer [mem 0x7fef0000-0x7fffffff]
[ 0.336666] e820: reserve RAM buffer [mem 0x271600000-0x273ffffff]
[ 0.336800] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.336804] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.338827] clocksource: Switched to clocksource hpet
[ 0.346779] VFS: Disk quotas dquot_6.6.0
[ 0.346800] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.346884] pnp: PnP ACPI init
[ 0.346977] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.346979] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.346980] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.346981] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.346982] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.346984] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.346985] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.346986] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.346988] system 00:00: [mem 0x20000000-0x201fffff] could not be reserved
[ 0.346989] system 00:00: [mem 0x40000000-0x401fffff] could not be reserved
[ 0.346992] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.347425] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.347427] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.347462] system 00:02: [io 0x0500-0x057f] has been reserved
[ 0.347463] system 00:02: [io 0x0480-0x04bf] has been reserved
[ 0.347465] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.347483] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.347511] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.347534] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.347558] pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active)
[ 0.347574] pnp: PnP ACPI: found 7 devices
[ 0.353731] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.353765] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.353771] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.353778] pci 0000:00:1c.0: bridge window [mem 0xf1800000-0xf18fffff]
[ 0.353789] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.353791] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 0.353797] pci 0000:00:1c.1: bridge window [mem 0xf0000000-0xf08fffff]
[ 0.353802] pci 0000:00:1c.1: bridge window [mem 0xf0c00000-0xf13fffff 64bit pref]
[ 0.353811] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.353812] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.353813] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.353814] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.353815] pci_bus 0000:00: resource 8 [mem 0x000c8000-0x000cbfff window]
[ 0.353816] pci_bus 0000:00: resource 9 [mem 0x000cc000-0x000cffff window]
[ 0.353817] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window]
[ 0.353818] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window]
[ 0.353819] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window]
[ 0.353820] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window]
[ 0.353821] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window]
[ 0.353822] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window]
[ 0.353823] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window]
[ 0.353824] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window]
[ 0.353825] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff window]
[ 0.353826] pci_bus 0000:00: resource 19 [mem 0x8ea00001-0xf7ffffff window]
[ 0.353827] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed44fff window]
[ 0.353828] pci_bus 0000:02: resource 1 [mem 0xf1800000-0xf18fffff]
[ 0.353830] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.353831] pci_bus 0000:03: resource 1 [mem 0xf0000000-0xf08fffff]
[ 0.353832] pci_bus 0000:03: resource 2 [mem 0xf0c00000-0xf13fffff 64bit pref]
[ 0.353899] NET: Registered protocol family 2
[ 0.354042] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.354166] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.354351] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.354383] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.354411] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.354470] NET: Registered protocol family 1
[ 0.354484] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.355209] PCI: CLS 64 bytes, default 64
[ 0.355245] Unpacking initramfs...
[ 0.689625] Freeing initrd memory: 20976K
[ 0.689670] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.689673] software IO TLB [mem 0x7bef0000-0x7fef0000] (64MB) mapped at [ffff896fbbef0000-ffff896fbfeeffff]
[ 0.689999] audit: initializing netlink subsys (disabled)
[ 0.690051] audit: type=2000 audit(1504695601.687:1): state=initialized audit_enabled=0 res=1
[ 0.690334] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[ 0.690374] zbud: loaded
[ 1.010280] Key type asymmetric registered
[ 1.010281] Asymmetric key parser 'x509' registered
[ 1.010294] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 1.010324] io scheduler noop registered
[ 1.010324] io scheduler deadline registered
[ 1.010333] io scheduler cfq registered (default)
[ 1.010333] io scheduler mq-deadline registered
[ 1.011020] pcieport 0000:00:01.0: Signaling PME with IRQ 26
[ 1.011039] pcieport 0000:00:1c.0: Signaling PME with IRQ 27
[ 1.011060] pcieport 0000:00:1c.1: Signaling PME with IRQ 28
[ 1.011081] pciehp 0000:00:1c.1:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[ 1.011121] efifb: probing for efifb
[ 1.011133] efifb: framebuffer at 0xe0000000, using 5632k, total 5632k
[ 1.011134] efifb: mode is 1600x900x32, linelength=6400, pages=1
[ 1.011134] efifb: scrolling: redraw
[ 1.011135] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.014061] Console: switching to colour frame buffer device 200x56
[ 1.016891] fb0: EFI VGA frame buffer device
[ 1.016897] intel_idle: MWAIT substates: 0x21120
[ 1.016898] intel_idle: v0.4.1 model 0x3A
[ 1.017030] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.017323] GHES: HEST is not enabled!
[ 1.017368] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.017693] Linux agpgart interface v0.103
[ 1.030907] tpm_tis 00:06: 1.2 TPM (device-id 0x0, rev-id 78)
[ 1.111204] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 1.111204] AMD IOMMUv2 functionality not available on this system
[ 1.111569] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.113415] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.113419] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.113490] mousedev: PS/2 mouse device common for all mice
[ 1.113518] rtc_cmos 00:03: RTC can wake from S4
[ 1.113669] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.113701] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.113711] intel_pstate: Intel P-state driver initializing
[ 1.113909] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.114213] NET: Registered protocol family 10
[ 1.114560] Segment Routing with IPv6
[ 1.114586] mip6: Mobile IPv6
[ 1.114588] NET: Registered protocol family 17
[ 1.114592] mpls_gso: MPLS GSO support
[ 1.114990] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.115015] microcode: sig=0x306a9, pf=0x10, revision=0x1b
[ 1.115118] microcode: Microcode Update Driver: v2.2.
[ 1.115314] registered taskstats version 1
[ 1.115340] zswap: loaded using pool lzo/zbud
[ 1.275584] rtc_cmos 00:03: setting system clock to 2017-09-06 11:00:02 UTC (1504695602)
[ 1.275630] PM: Hibernation image not present or could not be loaded.
[ 1.278372] Freeing unused kernel memory: 1468K
[ 1.278374] Write protecting the kernel read-only data: 12288k
[ 1.279181] Freeing unused kernel memory: 1696K
[ 1.284293] Freeing unused kernel memory: 1188K
[ 1.287088] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.372697] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 1.373054] pps_core: LinuxPPS API ver. 1 registered
[ 1.373055] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 1.373108] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.373110] ACPI: Thermal Zone [THM0] (60 C)
[ 1.373300] PTP clock support registered
[ 1.373821] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.373822] ACPI: Thermal Zone [THM1] (27 C)
[ 1.374204] ACPI: bus type USB registered
[ 1.374221] usbcore: registered new interface driver usbfs
[ 1.374229] usbcore: registered new interface driver hub
[ 1.374244] usbcore: registered new device driver usb
[ 1.374302] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 1.374302] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.374415] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 1.374728] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.374938] ehci-pci: EHCI PCI platform driver
[ 1.375750] sdhci: Secure Digital Host Controller Interface driver
[ 1.375750] sdhci: Copyright(c) Pierre Ossman
[ 1.375989] sdhci-pci 0000:03:00.0: SDHCI controller found [1180:e823] (rev 4)
[ 1.376520] sdhci-pci 0000:03:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
[ 1.376643] mmc0: SDHCI controller on PCI [0000:03:00.0] using DMA
[ 1.379370] SCSI subsystem initialized
[ 1.380567] libata version 3.00 loaded.
[ 1.387228] AVX version of gcm_enc/dec engaged.
[ 1.387229] AES CTR mode by8 optimization enabled
[ 1.520674] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[ 1.638619] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 3c:97:0e:84:1e:a5
[ 1.638621] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 1.638674] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
[ 1.638938] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.638946] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.638958] ehci-pci 0000:00:1a.0: debug port 2
[ 1.642866] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.642915] ehci-pci 0000:00:1a.0: irq 21, io mem 0xf193e000
[ 1.658957] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.659057] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.659060] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.659062] usb usb1: Product: EHCI Host Controller
[ 1.659064] usb usb1: Manufacturer: Linux 4.12.0-1-amd64 ehci_hcd
[ 1.659066] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.659406] hub 1-0:1.0: USB hub found
[ 1.659416] hub 1-0:1.0: 3 ports detected
[ 1.659874] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.659885] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.659905] ehci-pci 0000:00:1d.0: debug port 2
[ 1.663829] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.663855] ehci-pci 0000:00:1d.0: irq 19, io mem 0xf193f000
[ 1.678968] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.679071] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.679074] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.679076] usb usb2: Product: EHCI Host Controller
[ 1.679078] usb usb2: Manufacturer: Linux 4.12.0-1-amd64 ehci_hcd
[ 1.679080] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.679380] hub 2-0:1.0: USB hub found
[ 1.679391] hub 2-0:1.0: 3 ports detected
[ 1.679919] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.679933] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 1.681057] xhci_hcd 0000:00:14.0: hcc params 0x200071a1 hci version 0x100 quirks 0x0000b930
[ 1.681064] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.681213] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.681215] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.681217] usb usb3: Product: xHCI Host Controller
[ 1.681219] usb usb3: Manufacturer: Linux 4.12.0-1-amd64 xhci-hcd
[ 1.681221] usb usb3: SerialNumber: 0000:00:14.0
[ 1.681435] hub 3-0:1.0: USB hub found
[ 1.681450] hub 3-0:1.0: 4 ports detected
[ 1.681614] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.681619] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 1.681669] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.681671] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.681673] usb usb4: Product: xHCI Host Controller
[ 1.681675] usb usb4: Manufacturer: Linux 4.12.0-1-amd64 xhci-hcd
[ 1.681676] usb usb4: SerialNumber: 0000:00:14.0
[ 1.681866] hub 4-0:1.0: USB hub found
[ 1.681880] hub 4-0:1.0: 4 ports detected
[ 1.682439] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 1.683491] ahci 0000:00:1f.2: version 3.0
[ 1.683790] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 1.693913] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x17 impl SATA mode
[ 1.693918] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst
[ 1.695020] scsi host0: ahci
[ 1.695299] scsi host1: ahci
[ 1.695610] scsi host2: ahci
[ 1.695891] scsi host3: ahci
[ 1.696086] scsi host4: ahci
[ 1.696254] scsi host5: ahci
[ 1.696333] ata1: SATA max UDMA/133 abar m2048@0xf193d000 port 0xf193d100 irq 31
[ 1.696336] ata2: SATA max UDMA/133 abar m2048@0xf193d000 port 0xf193d180 irq 31
[ 1.696339] ata3: SATA max UDMA/133 abar m2048@0xf193d000 port 0xf193d200 irq 31
[ 1.696340] ata4: DUMMY
[ 1.696344] ata5: SATA max UDMA/133 abar m2048@0xf193d000 port 0xf193d300 irq 31
[ 1.696345] ata6: DUMMY
[ 1.698923] tsc: Refined TSC clocksource calibration: 2594.104 MHz
[ 1.698933] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x25647a45c02, max_idle_ns: 440795287674 ns
[ 1.986949] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 2.006947] usb 3-4: new high-speed USB device number 2 using xhci_hcd
[ 2.006950] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 2.009683] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.011977] ata1.00: ATA-8: LITEONIT LSS-32L6G-HP, DS51704, max UDMA/133
[ 2.011980] ata1.00: 62533296 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 2.012465] ata1.00: configured for UDMA/133
[ 2.012857] scsi 0:0:0:0: Direct-Access ATA LITEONIT LSS-32L 704 PQ: 0 ANSI: 5
[ 2.082775] psmouse serio1: synaptics: queried max coordinates: x [..5470], y [..4498]
[ 2.135397] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 2.135400] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.135831] hub 1-1:1.0: USB hub found
[ 2.136031] hub 1-1:1.0: 6 ports detected
[ 2.144782] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b1/0xb40000/0xa0000/0x0, board id: 0, fw id: 920262
[ 2.144792] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[ 2.163395] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 2.163399] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.163824] hub 2-1:1.0: USB hub found
[ 2.163986] hub 2-1:1.0: 8 ports detected
[ 2.166973] usb 3-4: New USB device found, idVendor=1e0e, idProduct=9001
[ 2.166976] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.166978] usb 3-4: Product: Android
[ 2.166980] usb 3-4: Manufacturer: Android
[ 2.166982] usb 3-4: SerialNumber: Mdm9x25
[ 2.169356] random: fast init done
[ 2.175299] usb-storage 3-4:1.7: USB Mass Storage device detected
[ 2.175488] scsi host6: usb-storage 3-4:1.7
[ 2.175635] usbcore: registered new interface driver usb-storage
[ 2.176210] usbcore: registered new interface driver uas
[ 2.183419] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
[ 2.357666] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.358405] ata2.00: ATA-9: WDC WD10SPCX-08HWST0, 01.01A01, max UDMA/133
[ 2.358408] ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 2.359179] ata2.00: configured for UDMA/133
[ 2.359598] scsi 1:0:0:0: Direct-Access ATA WDC WD10SPCX-08H 1A01 PQ: 0 ANSI: 5
[ 2.422965] usb 1-1.3: new full-speed USB device number 3 using ehci-pci
[ 2.450970] usb 2-1.5: new high-speed USB device number 3 using ehci-pci
[ 2.532160] usb 1-1.3: New USB device found, idVendor=147e, idProduct=2020
[ 2.532164] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.532166] usb 1-1.3: Product: Biometric Coprocessor
[ 2.532168] usb 1-1.3: Manufacturer: Auth
[ 2.559418] usb 2-1.5: New USB device found, idVendor=17ef, idProduct=1009
[ 2.559422] usb 2-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.559846] hub 2-1.5:1.0: USB hub found
[ 2.560047] hub 2-1.5:1.0: 4 ports detected
[ 2.610972] usb 1-1.4: new full-speed USB device number 4 using ehci-pci
[ 2.713633] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.723143] clocksource: Switched to clocksource tsc
[ 2.723517] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=217f
[ 2.723520] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.723522] usb 1-1.4: Product: Broadcom Bluetooth Device
[ 2.723524] usb 1-1.4: Manufacturer: Broadcom Corp
[ 2.723526] usb 1-1.4: SerialNumber: 7CE9D3B7FC24
[ 2.802974] usb 1-1.6: new high-speed USB device number 5 using ehci-pci
[ 2.829849] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 2.846980] usb 2-1.5.2: new high-speed USB device number 4 using ehci-pci
[ 2.918796] usb 1-1.6: New USB device found, idVendor=5986, idProduct=02d5
[ 2.918800] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.918802] usb 1-1.6: Product: Integrated Camera
[ 2.918804] usb 1-1.6: Manufacturer: Ricoh Company Ltd.
[ 2.955548] usb 2-1.5.2: New USB device found, idVendor=1a40, idProduct=0101
[ 2.955552] usb 2-1.5.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.955554] usb 2-1.5.2: Product: USB 2.0 Hub
[ 2.955813] hub 2-1.5.2:1.0: USB hub found
[ 2.955886] hub 2-1.5.2:1.0: 4 ports detected
[ 3.025503] ata5: SATA link down (SStatus 0 SControl 300)
[ 3.028647] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input3
[ 3.029603] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 3.029609] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 3.029645] sd 1:0:0:0: [sdb] Write Protect is off
[ 3.029651] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.029725] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.029779] sd 0:0:0:0: [sda] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB)
[ 3.029810] sd 0:0:0:0: [sda] Write Protect is off
[ 3.029815] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.029870] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.034186] sda: sda1 sda2 sda3 sda5 sda6 sda7
[ 3.034975] usb 2-1.5.4: new full-speed USB device number 5 using ehci-pci
[ 3.035040] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.148805] usb 2-1.5.4: New USB device found, idVendor=04e6, idProduct=5116
[ 3.148809] usb 2-1.5.4: New USB device strings: Mfr=1, Product=2, SerialNumber=5
[ 3.148811] usb 2-1.5.4: Product: SCR33xx v2.0 USB SC Reader
[ 3.148813] usb 2-1.5.4: Manufacturer: Identive
[ 3.148815] usb 2-1.5.4: SerialNumber: 53311647700432
[ 3.204247] scsi 6:0:0:0: CD-ROM Linux File-Stor Gadget 0000 PQ: 0 ANSI: 2
[ 3.210764] sr 6:0:0:0: [sr0] scsi-1 drive
[ 3.210768] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.211087] sr 6:0:0:0: Attached scsi CD-ROM sr0
[ 4.734708] sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7 sdb8
[ 4.735349] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 5.851081] raid6: sse2x1 gen() 8956 MB/s
[ 5.919085] raid6: sse2x1 xor() 6977 MB/s
[ 5.987091] raid6: sse2x2 gen() 11129 MB/s
[ 6.055092] raid6: sse2x2 xor() 7983 MB/s
[ 6.123097] raid6: sse2x4 gen() 13092 MB/s
[ 6.191098] raid6: sse2x4 xor() 9696 MB/s
[ 6.191099] raid6: using algorithm sse2x4 gen() 13092 MB/s
[ 6.191099] raid6: .... xor() 9696 MB/s, rmw enabled
[ 6.191100] raid6: using ssse3x2 recovery algorithm
[ 6.191344] xor: automatically using best checksumming function avx
[ 6.191497] async_tx: api initialized (async)
[ 6.207666] Btrfs loaded, crc32c=crc32c-intel
[ 6.930400] PM: Starting manual resume from disk
[ 6.930406] PM: Hibernation image partition 8:18 present
[ 6.930408] PM: Looking for hibernation image.
[ 6.930570] PM: Image not found (code -22)
[ 6.930572] PM: Hibernation image not present or could not be loaded.
[ 7.075078] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 7.191026] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 7.195450] systemd[1]: systemd 234 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
[ 7.195586] systemd[1]: Detected architecture x86-64.
[ 7.195736] systemd[1]: Set hostname to <universi-mcbk52>.
[ 7.245468] random: crng init done
[ 7.331708] systemd[1]: Listening on Journal Socket.
[ 7.331782] systemd[1]: Listening on udev Kernel Socket.
[ 7.331811] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 7.331847] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 7.331990] systemd[1]: Created slice System Slice.
[ 7.332104] systemd[1]: Created slice system-getty.slice.
[ 7.332606] systemd[1]: Mounting Kernel Debug File System...
[ 7.344546] EXT4-fs (sda5): re-mounted. Opts: discard,user_xattr,errors=remount-ro
[ 7.351995] RPC: Registered named UNIX socket transport module.
[ 7.351997] RPC: Registered udp transport module.
[ 7.351998] RPC: Registered tcp transport module.
[ 7.351998] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 7.361973] lp: driver loaded but no devices found
[ 7.367723] ppdev: user-space parallel port driver
[ 7.475585] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1f/PNP0C09:00/PNP0C0E:00/input/input4
[ 7.475589] ACPI: Sleep Button [SLPB]
[ 7.475746] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 7.476347] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1f/PNP0C09:00/PNP0C0D:00/input/input5
[ 7.477042] ACPI: Lid Switch [LID]
[ 7.477098] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 7.477101] ACPI: Power Button [PWRF]
[ 7.477422] acpi device:03: registered as cooling_device4
[ 7.477487] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[ 7.482515] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 7.493025] ACPI: AC Adapter [AC] (on-line)
[ 7.501169] ACPI: Battery Slot [BAT0] (battery present)
[ 7.501261] ACPI: Battery Slot [BAT1] (battery absent)
[ 7.552655] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20170303/utaddress-247)
[ 7.552662] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.552664] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20170303/utaddress-247)
[ 7.552667] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.552668] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20170303/utaddress-247)
[ 7.552671] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.552672] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20170303/utaddress-247)
[ 7.552675] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.552676] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 7.552885] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 7.552931] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 7.552973] sr 6:0:0:0: Attached scsi generic sg2 type 5
[ 7.553987] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 7.560061] Non-volatile memory driver v1.3
[ 7.561250] [drm] Memory usable by graphics device = 2048M
[ 7.561253] checking generic (e0000000 580000) vs hw (e0000000 10000000)
[ 7.561254] fb: switching to inteldrmfb from EFI VGA
[ 7.561294] Console: switching to colour dummy device 80x25
[ 7.567021] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[ 7.567023] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 7.567023] thinkpad_acpi: ThinkPad BIOS CBET4000 4.6-1360-g2997a97a3a, EC G7HT39WW-3.22
[ 7.567024] thinkpad_acpi: Lenovo ThinkPad T430s, model 23539LU
[ 7.567481] thinkpad_hwmon thinkpad_hwmon: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 7.567707] thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode
[ 7.567721] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 7.567722] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 7.569128] [drm] Replacing VGA console driver
[ 7.569206] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 7.569206] [drm] Driver supports precise vblank timestamp query.
[ 7.569211] i915 0000:00:02.0: Invalid PCI ROM data signature: expecting 0x52494350, got 0xe934aa55
[ 7.569216] [drm] Failed to find VBIOS tables (VBT)
[ 7.569562] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 7.576664] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 7.577300] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 7.578586] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input9
[ 7.581010] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 7.581011] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 7.581012] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 7.581013] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ 7.584347] ath: phy0: Killer Wireless card detected
[ 7.595977] ath: phy0: ASPM enabled: 0x43
[ 7.595980] ath: EEPROM regdomain: 0x60
[ 7.595980] ath: EEPROM indicates we should expect a direct regpair map
[ 7.595981] ath: Country alpha2 being used: 00
[ 7.595982] ath: Regpair used: 0x60
[ 7.600113] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 7.600441] ieee80211 phy0: Atheros AR9300 Rev:3 mem=0xffffa2d9c15a0000, irq=17
[ 7.650322] [drm] Initialized i915 1.6.0 20170403 for 0000:00:02.0 on minor 0
[ 7.670635] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 7.670637] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 7.670639] snd_hda_codec_realtek hdaudioC0D0: hp_outs=2 (0x15/0x1b/0x0/0x0/0x0)
[ 7.670640] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 7.670641] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 7.670643] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 7.670645] snd_hda_codec_realtek hdaudioC0D0: Dock Mic=0x19
[ 7.670646] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 7.690632] EXT4-fs (sda3): mounting ext2 file system using the ext4 subsystem
[ 7.691748] EXT4-fs (sda3): mounted filesystem without journal. Opts: user_xattr
[ 7.695255] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: discard,user_xattr
[ 7.698904] intel_rapl: Found RAPL domain package
[ 7.698906] intel_rapl: Found RAPL domain core
[ 7.698907] intel_rapl: Found RAPL domain uncore
[ 7.764532] iTCO_vendor_support: vendor-support=0
[ 7.764975] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 7.765018] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560)
[ 7.765121] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 8.067312] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 8.067357] fbcon: inteldrmfb (fb0) is primary device
[ 8.070287] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 8.072151] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 8.072231] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 8.072321] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 8.072401] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 8.072480] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 8.072561] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 8.072632] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 8.476373] Adding 8389628k swap on /dev/sdb2. Priority:-1 extents:1 across:8389628k FS
[ 8.581859] usbcore: registered new interface driver cdc_wdm
[ 8.583191] qmi_wwan 3-4:1.5: cdc-wdm0: USB WDM device
[ 8.584240] qmi_wwan 3-4:1.5 wwan0: register 'qmi_wwan' at usb-0000:00:14.0-4, WWAN/QMI device, 7e:f3:e9:9f:b8:87
[ 8.584302] usbcore: registered new interface driver qmi_wwan
[ 8.874346] Console: switching to colour frame buffer device 200x56
[ 8.897121] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 8.897229] usbcore: registered new interface driver usbserial
[ 8.897259] usbcore: registered new interface driver usbserial_generic
[ 8.897287] usbserial: USB Serial support registered for generic
[ 8.902358] usbcore: registered new interface driver option
[ 8.902387] usbserial: USB Serial support registered for GSM modem (1-port)
[ 8.902618] option 3-4:1.0: GSM modem (1-port) converter detected
[ 8.903646] usb 3-4: GSM modem (1-port) converter now attached to ttyUSB0
[ 8.903768] option 3-4:1.1: GSM modem (1-port) converter detected
[ 8.903931] usb 3-4: GSM modem (1-port) converter now attached to ttyUSB1
[ 8.904033] option 3-4:1.2: GSM modem (1-port) converter detected
[ 8.904183] usb 3-4: GSM modem (1-port) converter now attached to ttyUSB2
[ 8.904302] option 3-4:1.3: GSM modem (1-port) converter detected
[ 8.904431] usb 3-4: GSM modem (1-port) converter now attached to ttyUSB3
[ 8.904541] option 3-4:1.4: GSM modem (1-port) converter detected
[ 8.904667] usb 3-4: GSM modem (1-port) converter now attached to ttyUSB4
[ 8.909856] qmi_wwan 3-4:1.5 wwp0s20u4i5: renamed from wwan0
[ 9.086074] media: Linux media interface: v0.10
[ 9.090311] Linux video capture interface: v2.00
[ 9.101348] Bluetooth: Core ver 2.22
[ 9.101362] NET: Registered protocol family 31
[ 9.101363] Bluetooth: HCI device and connection manager initialized
[ 9.101366] Bluetooth: HCI socket layer initialized
[ 9.101368] Bluetooth: L2CAP socket layer initialized
[ 9.101374] Bluetooth: SCO socket layer initialized
[ 9.167772] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:02d5)
[ 9.170055] uvcvideo 1-1.6:1.0: Entity type for entity Extension 4 was not initialized!
[ 9.170061] uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized!
[ 9.170064] uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized!
[ 9.170067] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized!
[ 9.170356] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input18
[ 9.170539] usbcore: registered new interface driver uvcvideo
[ 9.170542] USB Video Class driver (1.1.1)
[ 9.174911] usbcore: registered new interface driver btusb
[ 9.378140] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: user_xattr
[ 10.542757] EXT4-fs (sdb8): mounted filesystem with ordered data mode. Opts: user_xattr
[ 11.066974] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: user_xattr
[ 11.109997] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: discard,user_xattr
[ 11.144312] systemd-journald[303]: Received request to flush runtime journal from PID 1
[ 11.261425] EXT4-fs (sdb7): mounted filesystem with ordered data mode. Opts: user_xattr
[ 11.341481] EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: user_xattr
[ 11.425463] EXT4-fs (sdb4): mounted filesystem with ordered data mode. Opts: user_xattr
[ 11.775039] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 11.775041] Bluetooth: BNEP filters: protocol multicast
[ 11.775044] Bluetooth: BNEP socket layer initialized
[ 11.851208] nfc: nfc_init: NFC Core ver 0.1
[ 11.851224] NET: Registered protocol family 39
[ 11.965266] ata1.00: configured for UDMA/133
[ 11.965270] ata1: EH complete
[ 12.018835] ata2.00: configured for UDMA/133
[ 12.018840] ata2: EH complete
[ 14.532896] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 14.791881] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 14.803576] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 14.814178] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 14.830330] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 15.150423] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 17.755462] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 17.766306] Ebtables v2.0 registered
[ 22.637046] Bluetooth: RFCOMM TTY layer initialized
[ 22.637053] Bluetooth: RFCOMM socket layer initialized
[ 22.637058] Bluetooth: RFCOMM ver 1.11
[ 34.611224] fuse init (API version 7.26)
[ 39.437069] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 39.442688] ISOFS: changing to secondary root