blob: 522f71966fee33fb512710b56f3173137bd1a3da [file] [log] [blame]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.60-1+deb7u3
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=7d581789-2cdd-423e-9a8b-b89626891401 ro quiet
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 0000000000001000 type 16
[ 0.000000] BIOS-e820: 0000000000001000 - 00000000000a0000 (usable)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bdad5000 (usable)
[ 0.000000] BIOS-e820: 00000000bdad5000 - 00000000bdc00000 type 16
[ 0.000000] BIOS-e820: 00000000bdc00000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000013c000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Lenovo 7458CY9/7458CY9, BIOS CBET4000 4.0-6709-g67584f2 08/14/2014
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x13c000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FFFF00000 uncachable
[ 0.000000] 1 base 0BDC00000 mask FFFC00000 uncachable
[ 0.000000] 2 base 0BE000000 mask FFE000000 uncachable
[ 0.000000] 3 base 0C0000000 mask FF0000000 uncachable
[ 0.000000] 4 base 0D0000000 mask FF0000000 write-combining
[ 0.000000] 5 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0xbdad5 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000f0000] f0000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bdad5000
[ 0.000000] 0000000000 - 00bda00000 page 2M
[ 0.000000] 00bda00000 - 00bdad5000 page 4k
[ 0.000000] kernel direct mapping tables up to bdad5000 @ 1fffb000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-000000013c000000
[ 0.000000] 0100000000 - 013c000000 page 2M
[ 0.000000] kernel direct mapping tables up to 13c000000 @ bdad3000-bdad5000
[ 0.000000] RAMDISK: 36bee000 - 375ef000
[ 0.000000] ACPI: RSDP 00000000000f0400 00024 (v02 CORE )
[ 0.000000] ACPI: XSDT 00000000bdbde0e0 00054 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: HPET 00000000bdbde210 00038 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: APIC 00000000bdbde250 00068 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: MCFG 00000000bdbde2c0 0003C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: DMAR 00000000bdbde300 000A8 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: FACP 00000000bdbe1ae0 000F4 (v03 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: DSDT 00000000bdbde3f0 035E1 (v03 COREv4 COREBOOT 20090419 INTL 20140724)
[ 0.000000] ACPI: FACS 00000000bdbde3b0 00040
[ 0.000000] ACPI: SSDT 00000000bdbe1be0 002EC (v02 CORE COREBOOT 0000002A CORE 0000002A)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000013c000000
[ 0.000000] Initmem setup node 0 0000000000000000-000000013c000000
[ 0.000000] NODE_DATA [000000013bffb000 - 000000013bffffff]
[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880137600000-ffff88013adfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0013c000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x000000a0
[ 0.000000] 0: 0x00000100 -> 0x000bdad5
[ 0.000000] 0: 0x00100000 -> 0x0013c000
[ 0.000000] On node 0 totalpages: 1022565
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3922 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 758541 pages, LIFO batch:31
[ 0.000000] Normal zone: 3360 pages used for memmap
[ 0.000000] Normal zone: 242400 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x608
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000010000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bdad5000 - 00000000bdc00000
[ 0.000000] PM: Registered nosave memory: 00000000bdc00000 - 00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000
[ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:30000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88013bc00000 s82944 r8192 d23552 u1048576
[ 0.000000] pcpu-alloc: s82944 r8192 d23552 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1004863
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=7d581789-2cdd-423e-9a8b-b89626891401 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3947860k/5177344k available (3431k kernel code, 1087084k absent, 142400k reserved, 3308k data, 580k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:512 16
[ 0.000000] Extended CMOS year: 300
[ 0.000000] WARNING: Persistent clock returned invalid value!
[ 0.000000] Check your CMOS/BIOS settings.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Detected 2400.171 MHz processor.
[ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.34 BogoMIPS (lpj=9600684)
[ 0.004010] pid_max: default: 32768 minimum: 301
[ 0.004070] Security Framework initialized
[ 0.004077] AppArmor: AppArmor disabled by boot time parameter
[ 0.008090] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.010267] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.011298] Mount-cache hash table entries: 256
[ 0.011471] Initializing cgroup subsys cpuacct
[ 0.011478] Initializing cgroup subsys memory
[ 0.011494] Initializing cgroup subsys devices
[ 0.011499] Initializing cgroup subsys freezer
[ 0.011501] Initializing cgroup subsys net_cls
[ 0.011505] Initializing cgroup subsys blkio
[ 0.011514] Initializing cgroup subsys perf_event
[ 0.011556] CPU: Physical Processor ID: 0
[ 0.011558] CPU: Processor Core ID: 0
[ 0.011561] mce: CPU supports 6 MCE banks
[ 0.011572] CPU0: Thermal monitoring enabled (TM2)
[ 0.011577] using mwait in idle threads.
[ 0.012254] ACPI: Core revision 20110623
[ 0.016092] DMAR: Host address width 40
[ 0.016096] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.016114] IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c9008020e30260 ecap 1000
[ 0.016117] DMAR: DRHD base: 0x000000fed91000 flags: 0x0
[ 0.016125] IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c0000020630260 ecap 1000
[ 0.016128] DMAR: DRHD base: 0x000000fed92000 flags: 0x0
[ 0.016136] IOMMU 2: reg_base_addr fed92000 ver 1:0 cap c0000020630270 ecap 1000
[ 0.016139] DMAR: DRHD base: 0x000000fed93000 flags: 0x1
[ 0.016146] IOMMU 3: reg_base_addr fed93000 ver 1:0 cap c9008020630260 ecap 1000
[ 0.016617] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.056789] CPU0: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz stepping 06
[ 0.060003] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.060003] ... version: 2
[ 0.060003] ... bit width: 40
[ 0.060003] ... generic registers: 2
[ 0.060003] ... value mask: 000000ffffffffff
[ 0.060003] ... max period: 000000007fffffff
[ 0.060003] ... fixed-purpose events: 3
[ 0.060003] ... event mask: 0000000700000003
[ 0.060003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.060003] Booting Node 0, Processors #1 Ok.
[ 0.060003] smpboot cpu 1: start_ip = 9a000
[ 0.148043] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.148089] Brought up 2 CPUs
[ 0.148093] Total of 2 processors activated (9600.49 BogoMIPS).
[ 0.150660] devtmpfs: initialized
[ 0.155277] print_constraints: dummy:
[ 0.155277] NET: Registered protocol family 16
[ 0.155277] ACPI: bus type pci registered
[ 0.155277] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.155277] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.163659] PCI: Using configuration type 1 for base access
[ 0.164578] bio: create slab <bio-0> at 0
[ 0.164578] ACPI: Added _OSI(Module Device)
[ 0.164578] ACPI: Added _OSI(Processor Device)
[ 0.164578] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.164578] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.165266] ACPI: EC: Look up EC in DSDT
[ 0.168999] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.169453] ACPI: Interpreter enabled
[ 0.169459] ACPI: (supports S0 S3 S4 S5)
[ 0.169491] ACPI: Using IOAPIC for interrupt routing
[ 0.176696] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[ 0.176908] ACPI: No dock devices found.
[ 0.176910] HEST: Table not found.
[ 0.176915] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.177037] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.177223] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.177227] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.177230] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.177234] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000c3fff]
[ 0.177237] pci_root PNP0A08:00: host bridge window [mem 0x000c4000-0x000c7fff]
[ 0.177240] pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000cbfff]
[ 0.177243] pci_root PNP0A08:00: host bridge window [mem 0x000cc000-0x000cffff]
[ 0.177247] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[ 0.177250] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 0.177253] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.177257] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
[ 0.177260] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
[ 0.177263] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
[ 0.177267] pci_root PNP0A08:00: host bridge window [mem 0x000e8000-0x000ebfff]
[ 0.177270] pci_root PNP0A08:00: host bridge window [mem 0x000ec000-0x000effff]
[ 0.177273] pci_root PNP0A08:00: host bridge window [mem 0x000f0000-0x000fffff]
[ 0.177277] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff]
[ 0.177280] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff]
[ 0.177301] pci 0000:00:00.0: [8086:2a40] type 0 class 0x000600
[ 0.177326] DMAR: Forcing write-buffer flush capability
[ 0.177328] DMAR: Disabling IOMMU for graphics on this chipset
[ 0.177359] pci 0000:00:02.0: [8086:2a42] type 0 class 0x000300
[ 0.177375] pci 0000:00:02.0: reg 10: [mem 0xe0000000-0xe03fffff 64bit]
[ 0.177385] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.177393] pci 0000:00:02.0: reg 20: [io 0x1c00-0x1c07]
[ 0.177437] pci 0000:00:02.1: [8086:2a43] type 0 class 0x000380
[ 0.177450] pci 0000:00:02.1: reg 10: [mem 0xe0400000-0xe04fffff 64bit]
[ 0.177512] pci 0000:00:03.0: [8086:2a44] type 0 class 0x000780
[ 0.177531] pci 0000:00:03.0: reg 10: [mem 0xe0626100-0xe062610f 64bit]
[ 0.177591] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.177665] pci 0000:00:19.0: [8086:10f5] type 0 class 0x000200
[ 0.177693] pci 0000:00:19.0: reg 10: [mem 0xe0600000-0xe061ffff]
[ 0.177706] pci 0000:00:19.0: reg 14: [mem 0xe0624000-0xe0624fff]
[ 0.177719] pci 0000:00:19.0: reg 18: [io 0x1800-0x181f]
[ 0.177818] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.177850] pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03
[ 0.177913] pci 0000:00:1a.0: reg 20: [io 0x1820-0x183f]
[ 0.177990] pci 0000:00:1a.1: [8086:2938] type 0 class 0x000c03
[ 0.178052] pci 0000:00:1a.1: reg 20: [io 0x1840-0x185f]
[ 0.178128] pci 0000:00:1a.2: [8086:2939] type 0 class 0x000c03
[ 0.178191] pci 0000:00:1a.2: reg 20: [io 0x1860-0x187f]
[ 0.178280] pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03
[ 0.178309] pci 0000:00:1a.7: reg 10: [mem 0xe0625800-0xe0625bff]
[ 0.178430] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.178473] pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403
[ 0.178496] pci 0000:00:1b.0: reg 10: [mem 0xe0620000-0xe0623fff 64bit]
[ 0.178604] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.178640] pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604
[ 0.178753] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.178792] pci 0000:00:1c.1: [8086:2942] type 1 class 0x000604
[ 0.178904] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.178943] pci 0000:00:1c.2: [8086:2944] type 1 class 0x000604
[ 0.179055] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.179093] pci 0000:00:1c.3: [8086:2946] type 1 class 0x000604
[ 0.179207] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.179251] pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03
[ 0.179313] pci 0000:00:1d.0: reg 20: [io 0x1880-0x189f]
[ 0.179390] pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03
[ 0.179452] pci 0000:00:1d.1: reg 20: [io 0x18a0-0x18bf]
[ 0.179529] pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03
[ 0.179591] pci 0000:00:1d.2: reg 20: [io 0x18c0-0x18df]
[ 0.179681] pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03
[ 0.179709] pci 0000:00:1d.7: reg 10: [mem 0xe0625c00-0xe0625fff]
[ 0.179831] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.179864] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.179966] pci 0000:00:1f.0: [8086:2917] type 0 class 0x000601
[ 0.180159] pci 0000:00:1f.2: [8086:2929] type 0 class 0x000106
[ 0.180190] pci 0000:00:1f.2: reg 10: [io 0x1c08-0x1c0f]
[ 0.180203] pci 0000:00:1f.2: reg 14: [io 0x1c18-0x1c1b]
[ 0.180217] pci 0000:00:1f.2: reg 18: [io 0x1c10-0x1c17]
[ 0.180230] pci 0000:00:1f.2: reg 1c: [io 0x1c1c-0x1c1f]
[ 0.180242] pci 0000:00:1f.2: reg 20: [io 0x18e0-0x18ff]
[ 0.180256] pci 0000:00:1f.2: reg 24: [mem 0xe0625000-0xe06257ff]
[ 0.180333] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.180363] pci 0000:00:1f.3: [8086:2930] type 0 class 0x000c05
[ 0.180387] pci 0000:00:1f.3: reg 10: [mem 0xe0626000-0xe06260ff 64bit]
[ 0.180421] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
[ 0.180525] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.180640] pci 0000:02:00.0: [8086:4236] type 0 class 0x000280
[ 0.180683] pci 0000:02:00.0: reg 10: [mem 0xe0500000-0xe0501fff 64bit]
[ 0.180888] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.188036] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[ 0.188046] pci 0000:00:1c.1: bridge window [mem 0xe0500000-0xe05fffff]
[ 0.188116] pci 0000:00:1c.2: PCI bridge to [bus 03-03]
[ 0.188192] pci 0000:00:1c.3: PCI bridge to [bus 04-04]
[ 0.188298] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
[ 0.188313] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.188317] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.188320] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.188324] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
[ 0.188328] pci 0000:00:1e.0: bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
[ 0.188331] pci 0000:00:1e.0: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
[ 0.188335] pci 0000:00:1e.0: bridge window [mem 0x000cc000-0x000cffff] (subtractive decode)
[ 0.188338] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[ 0.188342] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.188346] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.188349] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[ 0.188353] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[ 0.188357] pci 0000:00:1e.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[ 0.188360] pci 0000:00:1e.0: bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
[ 0.188364] pci 0000:00:1e.0: bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
[ 0.188368] pci 0000:00:1e.0: bridge window [mem 0x000f0000-0x000fffff] (subtractive decode)
[ 0.188372] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
[ 0.188375] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
[ 0.188412] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.188605] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.188674] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.188742] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.188809] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 0.188926] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.189284] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.189331] pci0000:00: ACPI _OSC control (0x1d) granted
[ 0.199884] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.199959] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.200043] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.200115] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.200186] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.200258] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.200330] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.200403] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.200658] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.200658] vgaarb: loaded
[ 0.200658] vgaarb: bridge control possible 0000:00:02.0
[ 0.200658] PCI: Using ACPI for IRQ routing
[ 0.202672] PCI: pci_cache_line_size set to 64 bytes
[ 0.202795] reserve RAM buffer: 00000000bdad5000 - 00000000bfffffff
[ 0.202943] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.202950] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.202957] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.208173] Switching to clocksource hpet
[ 0.210609] pnp: PnP ACPI init
[ 0.210628] ACPI: bus type pnp registered
[ 0.210727] pnp 00:00: [bus 00-ff]
[ 0.210731] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.210734] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.210739] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.210743] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.210746] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.210749] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.210752] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.210755] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.210758] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.210761] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.210764] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.210768] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.210771] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.210774] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.210777] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.210780] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.210783] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.210786] pnp 00:00: [mem 0xc0000000-0xfebfffff window]
[ 0.210790] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 0.210866] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.210895] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
[ 0.210898] pnp 00:01: [mem 0xfed14000-0xfed17fff]
[ 0.210901] pnp 00:01: [mem 0xfed18000-0xfed18fff]
[ 0.210904] pnp 00:01: [mem 0xfed19000-0xfed19fff]
[ 0.210907] pnp 00:01: [mem 0xf0000000-0xf3ffffff]
[ 0.210909] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
[ 0.210912] pnp 00:01: [mem 0xfed40000-0xfed44fff]
[ 0.210915] pnp 00:01: [mem 0xfed45000-0xfed8ffff]
[ 0.210982] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.210987] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.210991] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.210995] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.210999] system 00:01: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.211003] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.211007] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.211011] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.211016] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.211578] pnp 00:02: [io 0x0000-0x001f]
[ 0.211582] pnp 00:02: [io 0x0081-0x0091]
[ 0.211584] pnp 00:02: [io 0x0093-0x009f]
[ 0.211587] pnp 00:02: [io 0x00c0-0x00df]
[ 0.211592] pnp 00:02: [dma 4]
[ 0.211652] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.211666] pnp 00:03: [mem 0xff000000-0xffffffff]
[ 0.211735] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.211907] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[ 0.211994] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.211999] system 00:04: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.212027] pnp 00:05: [io 0x00f0]
[ 0.212038] pnp 00:05: [irq 13]
[ 0.212097] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.212114] pnp 00:06: [io 0x002e-0x002f]
[ 0.212117] pnp 00:06: [io 0x004e-0x004f]
[ 0.212119] pnp 00:06: [io 0x0061]
[ 0.212122] pnp 00:06: [io 0x0063]
[ 0.212124] pnp 00:06: [io 0x0065]
[ 0.212127] pnp 00:06: [io 0x0067]
[ 0.212129] pnp 00:06: [io 0x0080]
[ 0.212132] pnp 00:06: [io 0x0092]
[ 0.212134] pnp 00:06: [io 0x00b2-0x00b3]
[ 0.212137] pnp 00:06: [io 0x0800-0x080f]
[ 0.212139] pnp 00:06: [io 0x0600-0x067f]
[ 0.212142] pnp 00:06: [io 0x0580-0x05bf]
[ 0.212292] system 00:06: [io 0x0800-0x080f] has been reserved
[ 0.212297] system 00:06: [io 0x0600-0x067f] has been reserved
[ 0.212301] system 00:06: [io 0x0580-0x05bf] has been reserved
[ 0.212305] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.212323] pnp 00:07: [io 0x0070-0x0077]
[ 0.212385] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.212413] pnp 00:08: [io 0x0060]
[ 0.212416] pnp 00:08: [io 0x0064]
[ 0.212424] pnp 00:08: [irq 1]
[ 0.212487] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.212517] pnp 00:09: [irq 12]
[ 0.212579] pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.212609] pnp: PnP ACPI: found 10 devices
[ 0.212611] ACPI: ACPI bus type pnp unregistered
[ 0.220640] PCI: max bus depth: 1 pci_try_num: 2
[ 0.220703] pci 0000:00:1c.3: BAR 14: assigned [mem 0xc0000000-0xc01fffff]
[ 0.220712] pci 0000:00:1c.3: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref]
[ 0.220717] pci 0000:00:1c.3: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.220721] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.220737] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[ 0.220744] pci 0000:00:1c.1: bridge window [mem 0xe0500000-0xe05fffff]
[ 0.220756] pci 0000:00:1c.2: PCI bridge to [bus 03-03]
[ 0.220771] pci 0000:00:1c.3: PCI bridge to [bus 04-04]
[ 0.220776] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.220783] pci 0000:00:1c.3: bridge window [mem 0xc0000000-0xc01fffff]
[ 0.220789] pci 0000:00:1c.3: bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
[ 0.220798] pci 0000:00:1e.0: PCI bridge to [bus 05-05]
[ 0.220834] pci 0000:00:1c.0: setting latency timer to 64
[ 0.220843] pci 0000:00:1c.1: can't derive routing for PCI INT B
[ 0.220846] pci 0000:00:1c.1: PCI INT B: no GSI - using ISA IRQ 11
[ 0.220859] pci 0000:00:1c.1: setting latency timer to 64
[ 0.220867] pci 0000:00:1c.2: can't derive routing for PCI INT C
[ 0.220870] pci 0000:00:1c.2: PCI INT C: no GSI - using ISA IRQ 11
[ 0.220880] pci 0000:00:1c.2: setting latency timer to 64
[ 0.220888] pci 0000:00:1c.3: enabling device (0104 -> 0107)
[ 0.220892] pci 0000:00:1c.3: can't derive routing for PCI INT D
[ 0.220895] pci 0000:00:1c.3: PCI INT D: no GSI - using ISA IRQ 11
[ 0.220904] pci 0000:00:1c.3: setting latency timer to 64
[ 0.220917] pci 0000:00:1e.0: setting latency timer to 64
[ 0.220922] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.220925] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.220929] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.220932] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.220935] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.220938] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.220941] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
[ 0.220944] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
[ 0.220947] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
[ 0.220950] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
[ 0.220953] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
[ 0.220956] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
[ 0.220959] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
[ 0.220963] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
[ 0.220966] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
[ 0.220969] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff]
[ 0.220972] pci_bus 0000:00: resource 20 [mem 0xc0000000-0xfebfffff]
[ 0.220975] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff]
[ 0.220979] pci_bus 0000:02: resource 1 [mem 0xe0500000-0xe05fffff]
[ 0.220982] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff]
[ 0.220985] pci_bus 0000:04: resource 1 [mem 0xc0000000-0xc01fffff]
[ 0.220989] pci_bus 0000:04: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]
[ 0.220992] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
[ 0.220995] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
[ 0.220998] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.221002] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.221005] pci_bus 0000:05: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.221008] pci_bus 0000:05: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.221011] pci_bus 0000:05: resource 10 [mem 0x000cc000-0x000cffff]
[ 0.221014] pci_bus 0000:05: resource 11 [mem 0x000d0000-0x000d3fff]
[ 0.221017] pci_bus 0000:05: resource 12 [mem 0x000d4000-0x000d7fff]
[ 0.221020] pci_bus 0000:05: resource 13 [mem 0x000d8000-0x000dbfff]
[ 0.221023] pci_bus 0000:05: resource 14 [mem 0x000dc000-0x000dffff]
[ 0.221026] pci_bus 0000:05: resource 15 [mem 0x000e0000-0x000e3fff]
[ 0.221029] pci_bus 0000:05: resource 16 [mem 0x000e4000-0x000e7fff]
[ 0.221032] pci_bus 0000:05: resource 17 [mem 0x000e8000-0x000ebfff]
[ 0.221035] pci_bus 0000:05: resource 18 [mem 0x000ec000-0x000effff]
[ 0.221038] pci_bus 0000:05: resource 19 [mem 0x000f0000-0x000fffff]
[ 0.221042] pci_bus 0000:05: resource 20 [mem 0xc0000000-0xfebfffff]
[ 0.221045] pci_bus 0000:05: resource 21 [mem 0xfed40000-0xfed44fff]
[ 0.221121] NET: Registered protocol family 2
[ 0.221320] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.222809] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.226807] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.227324] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.227328] TCP reno registered
[ 0.227343] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.227388] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.227573] NET: Registered protocol family 1
[ 0.227596] pci 0000:00:02.0: Boot video device
[ 0.227918] PCI: CLS 64 bytes, default 64
[ 0.227984] Unpacking initramfs...
[ 0.553378] Freeing initrd memory: 10244k freed
[ 0.557357] DMAR: Device scope device [0000:00:03.01] not found
[ 0.557361] DMAR: Device scope device [0000:00:03.01] not found
[ 0.557364] DMAR: Device scope device [0000:00:03.02] not found
[ 0.557367] DMAR: Device scope device [0000:00:03.02] not found
[ 0.557370] DMAR: Device scope device [0000:00:03.03] not found
[ 0.557373] DMAR: Device scope device [0000:00:03.03] not found
[ 0.557378] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.557383] Placing 64MB software IO TLB between ffff8800b9ad3000 - ffff8800bdad3000
[ 0.557386] software IO TLB at phys 0xb9ad3000 - 0xbdad3000
[ 0.557985] audit: initializing netlink socket (disabled)
[ 0.558006] type=2000 audit(0.552:1): initialized
[ 0.576625] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.577608] VFS: Disk quotas dquot_6.5.2
[ 0.577650] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.577747] msgmni has been set to 7730
[ 0.577957] alg: No test for stdrng (krng)
[ 0.577995] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.578000] io scheduler noop registered
[ 0.578003] io scheduler deadline registered
[ 0.578025] io scheduler cfq registered (default)
[ 0.578150] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.578216] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.578341] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.578400] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 0.578520] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.578578] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[ 0.578703] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.578761] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[ 0.578945] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.578952] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.578979] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[ 0.578983] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.578989] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[ 0.579015] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[ 0.579022] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[ 0.579050] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[ 0.579056] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[ 0.579083] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.579162] pciehp 0000:00:1c.3:pcie04: HPC vendor_id 8086 device_id 2946 ss_vid 17aa ss_did 20f3
[ 0.579196] pciehp 0000:00:1c.3:pcie04: service driver pciehp loaded
[ 0.579209] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.579212] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.579716] intel_idle: does not run on family 6 model 23
[ 0.579753] ERST: Table is not found!
[ 0.579755] GHES: HEST is not enabled!
[ 0.579843] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.624558] Linux agpgart interface v0.103
[ 0.624682] agpgart-intel 0000:00:00.0: Intel GM45 Chipset
[ 0.624804] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 0.626254] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[ 0.626418] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 0.626593] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.640508] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.640519] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.640709] mousedev: PS/2 mouse device common for all mice
[ 0.640774] rtc_cmos 00:07: RTC can wake from S4
[ 0.640934] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 0.640969] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.640983] cpuidle: using governor ladder
[ 0.640986] cpuidle: using governor menu
[ 0.641254] TCP cubic registered
[ 0.641313] NET: Registered protocol family 10
[ 0.641939] Mobile IPv6
[ 0.641943] NET: Registered protocol family 17
[ 0.641948] Registering the dns_resolver key type
[ 0.642135] PM: Hibernation image not present or could not be loaded.
[ 0.642148] registered taskstats version 1
[ 0.642938] rtc_cmos 00:07: setting system clock to 2014-08-14 07:02:00 UTC (1407999720)
[ 0.642982] Initializing network drop monitor service
[ 0.644895] Freeing unused kernel memory: 580k freed
[ 0.645039] Write protecting the kernel read-only data: 6144k
[ 0.648735] Freeing unused kernel memory: 648k freed
[ 0.652700] Freeing unused kernel memory: 688k freed
[ 0.654576] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.667154] udevd[49]: starting version 175
[ 0.690251] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 0.690255] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 0.690288] e1000e 0000:00:19.0: can't derive routing for PCI INT A
[ 0.690291] e1000e 0000:00:19.0: PCI INT A: no GSI - using ISA IRQ 11
[ 0.690312] e1000e 0000:00:19.0: setting latency timer to 64
[ 0.690402] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 0.690457] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[ 0.699394] usbcore: registered new interface driver usbfs
[ 0.699426] usbcore: registered new interface driver hub
[ 0.737239] usbcore: registered new device driver usb
[ 0.737680] SCSI subsystem initialized
[ 0.737854] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.741543] libata version 3.00 loaded.
[ 0.754781] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.765271] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.765275] ACPI: Thermal Zone [THM0] (42 C)
[ 0.768585] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.768589] ACPI: Thermal Zone [THM1] (36 C)
[ 0.924465] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:1f:16:18:14:a3
[ 0.924471] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 0.924501] e1000e 0000:00:19.0: eth0: MAC: 7, PHY: 8, PBA No: 1008FF-0FF
[ 0.924578] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.924584] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.924612] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.924653] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.928532] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 0.928557] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe0625800
[ 0.944022] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.944071] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.944075] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.944078] usb usb1: Product: EHCI Host Controller
[ 0.944081] usb usb1: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[ 0.944083] usb usb1: SerialNumber: 0000:00:1a.7
[ 0.944249] hub 1-0:1.0: USB hub found
[ 0.944256] hub 1-0:1.0: 6 ports detected
[ 0.944373] ahci 0000:00:1f.2: version 3.0
[ 0.944445] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
[ 0.944494] ahci: SSS flag set, parallel bus scan disabled
[ 0.944527] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[ 0.944532] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ccc
[ 0.944539] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.945192] scsi0 : ahci
[ 0.945323] scsi1 : ahci
[ 0.945420] scsi2 : ahci
[ 0.945514] scsi3 : ahci
[ 0.945650] ata1: SATA max UDMA/133 abar m2048@0xe0625000 port 0xe0625100 irq 45
[ 0.945655] ata2: SATA max UDMA/133 abar m2048@0xe0625000 port 0xe0625180 irq 45
[ 0.945658] ata3: DUMMY
[ 0.945660] ata4: DUMMY
[ 0.945705] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.945711] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.945724] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2
[ 0.945773] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820
[ 0.945829] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.945832] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.945835] usb usb2: Product: UHCI Host Controller
[ 0.945838] usb usb2: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[ 0.945841] usb usb2: SerialNumber: 0000:00:1a.0
[ 0.946005] hub 2-0:1.0: USB hub found
[ 0.946012] hub 2-0:1.0: 2 ports detected
[ 0.946124] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.946128] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.946139] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 3
[ 0.946185] uhci_hcd 0000:00:1a.1: irq 17, io base 0x00001840
[ 0.946231] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.946235] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.946238] usb usb3: Product: UHCI Host Controller
[ 0.946241] usb usb3: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[ 0.946243] usb usb3: SerialNumber: 0000:00:1a.1
[ 0.946388] hub 3-0:1.0: USB hub found
[ 0.946394] hub 3-0:1.0: 2 ports detected
[ 0.946494] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 0.946499] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.946509] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 4
[ 0.946542] uhci_hcd 0000:00:1a.2: irq 18, io base 0x00001860
[ 0.946587] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.946591] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.946594] usb usb4: Product: UHCI Host Controller
[ 0.946597] usb usb4: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[ 0.946599] usb usb4: SerialNumber: 0000:00:1a.2
[ 0.946739] hub 4-0:1.0: USB hub found
[ 0.946745] hub 4-0:1.0: 2 ports detected
[ 0.946851] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.946856] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.946867] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 0.946900] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001880
[ 0.946944] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.946948] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.946951] usb usb5: Product: UHCI Host Controller
[ 0.946954] usb usb5: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[ 0.946956] usb usb5: SerialNumber: 0000:00:1d.0
[ 0.947098] hub 5-0:1.0: USB hub found
[ 0.947105] hub 5-0:1.0: 2 ports detected
[ 0.947209] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.947214] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.947226] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 0.947259] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018a0
[ 0.947304] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.947307] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.947311] usb usb6: Product: UHCI Host Controller
[ 0.947313] usb usb6: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[ 0.947316] usb usb6: SerialNumber: 0000:00:1d.1
[ 0.947447] hub 6-0:1.0: USB hub found
[ 0.947453] hub 6-0:1.0: 2 ports detected
[ 0.947555] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.947559] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.947569] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 0.947602] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018c0
[ 0.947647] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.947651] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.947654] usb usb7: Product: UHCI Host Controller
[ 0.947657] usb usb7: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[ 0.947659] usb usb7: SerialNumber: 0000:00:1d.2
[ 0.947794] hub 7-0:1.0: USB hub found
[ 0.947800] hub 7-0:1.0: 2 ports detected
[ 0.947927] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.947932] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.947942] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8
[ 0.947978] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.951873] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 0.951883] ehci_hcd 0000:00:1d.7: irq 16, io mem 0xe0625c00
[ 0.964019] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.964046] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.964050] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.964053] usb usb8: Product: EHCI Host Controller
[ 0.964056] usb usb8: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[ 0.964058] usb usb8: SerialNumber: 0000:00:1d.7
[ 0.964223] hub 8-0:1.0: USB hub found
[ 0.964230] hub 8-0:1.0: 6 ports detected
[ 1.264037] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.264685] ata1.00: ATA-8: SanDisk SDSSDH2256G, X211200, max UDMA/133
[ 1.264689] ata1.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 1.265365] ata1.00: configured for UDMA/133
[ 1.265528] scsi 0:0:0:0: Direct-Access ATA SanDisk SDSSDH22 X211 PQ: 0 ANSI: 5
[ 1.556020] Refined TSC clocksource calibration: 2400.084 MHz.
[ 1.556026] Switching to clocksource tsc
[ 1.584021] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.589420] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[ 1.589524] sd 0:0:0:0: [sda] Write Protect is off
[ 1.589528] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.589564] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.594781] sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
[ 1.595366] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.597533] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.632058] usb 3-1: new full-speed USB device number 2 using uhci_hcd
[ 1.804234] usb 3-1: New USB device found, idVendor=08ff, idProduct=2810
[ 1.804239] usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.804242] usb 3-1: Product: Fingerprint Sensor
[ 2.044012] usb 3-2: new full-speed USB device number 3 using uhci_hcd
[ 2.215233] usb 3-2: New USB device found, idVendor=0a5c, idProduct=2145
[ 2.215238] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.215241] usb 3-2: Product: ThinkPad Bluetooth with Enhanced Data Rate II
[ 2.215244] usb 3-2: Manufacturer: Lenovo Computer Corp
[ 2.440414] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 2.680041] usb 8-4: new high-speed USB device number 2 using ehci_hcd
[ 2.752054] udevd[341]: starting version 175
[ 2.875952] ACPI: Requesting acpi_cpufreq
[ 2.876319] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2d/PNP0C09:00/PNP0C0E:00/input/input1
[ 2.876328] ACPI: Sleep Button [SLPB]
[ 2.876404] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2d/PNP0C09:00/PNP0C0D:00/input/input2
[ 2.878873] ACPI: Lid Switch [LID]
[ 2.882298] Monitor-Mwait will be used to enter C-1 state
[ 2.882305] Monitor-Mwait will be used to enter C-2 state
[ 2.882311] Marking TSC unstable due to TSC halts in idle
[ 2.882320] ACPI: acpi_idle registered with cpuidle
[ 2.886161] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 2.886168] ACPI: Power Button [PWRF]
[ 2.890161] Switching to clocksource hpet
[ 2.903084] [drm] Initialized drm 1.1.0 20060810
[ 2.916222] acpi device:07: registered as cooling_device2
[ 2.916291] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
[ 2.916297] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 2.919081] cfg80211: Calling CRDA to update world regulatory domain
[ 2.928741] i915 0000:00:02.0: setting latency timer to 64
[ 2.952727] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
[ 2.952730] Copyright(c) 2003-2011 Intel Corporation
[ 2.952794] iwlwifi 0000:02:00.0: setting latency timer to 64
[ 2.952814] iwlwifi 0000:02:00.0: pci_resource_len = 0x00002000
[ 2.952816] iwlwifi 0000:02:00.0: pci_resource_base = ffffc90000668000
[ 2.952818] iwlwifi 0000:02:00.0: HW Revision ID = 0x0
[ 2.952895] iwlwifi 0000:02:00.0: irq 46 for MSI/MSI-X
[ 2.952938] iwlwifi 0000:02:00.0: Detected Intel(R) Ultimate N WiFi Link 5300 AGN, REV=0x24
[ 2.952995] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
[ 2.974782] iwlwifi 0000:02:00.0: device EEPROM VER=0x11e, CALIB=0x4
[ 2.974785] iwlwifi 0000:02:00.0: Device SKU: 0Xf0
[ 3.003579] i915 0000:00:02.0: irq 47 for MSI/MSI-X
[ 3.003589] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 3.003591] [drm] Driver supports precise vblank timestamp query.
[ 3.004487] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 3.032712] Non-volatile memory driver v1.3
[ 3.034135] iTCO_vendor_support: vendor-support=0
[ 3.047760] ACPI: Battery Slot [BAT0] (battery present)
[ 3.047882] ACPI: Battery Slot [BAT1] (battery absent)
[ 3.049044] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 3.049140] iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x0660)
[ 3.049217] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 3.049650] ACPI: AC Adapter [AC] (off-line)
[ 3.051789] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 3.063740] iwlwifi 0000:02:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
[ 3.088216] Bluetooth: Core ver 2.16
[ 3.088234] NET: Registered protocol family 31
[ 3.088236] Bluetooth: HCI device and connection manager initialized
[ 3.088239] Bluetooth: HCI socket layer initialized
[ 3.088240] Bluetooth: L2CAP socket layer initialized
[ 3.088260] Bluetooth: SCO socket layer initialized
[ 3.091396] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 3.096775] usbcore: registered new interface driver btusb
[ 3.148847] iwlwifi 0000:02:00.0: firmware: agent loaded iwlwifi-5000-5.ucode into memory
[ 3.148853] iwlwifi 0000:02:00.0: loaded firmware version 8.83.5.1 build 33692
[ 3.149075] Registered led device: phy0-led
[ 3.154732] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 3.161305] cfg80211: World regulatory domain updated:
[ 3.161308] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 3.161310] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 3.161313] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 3.161315] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[ 3.161317] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[ 3.161319] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[ 3.161322] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
[ 3.582972] usb 8-4: New USB device found, idVendor=0bdb, idProduct=1900
[ 3.582981] usb 8-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.582988] usb 8-4: Product: Ericsson F3507g Mobile Broadband Minicard Composite Device
[ 3.582994] usb 8-4: Manufacturer: Ericsson
[ 3.583000] usb 8-4: SerialNumber: 3541430222940450
[ 3.681321] fbcon: inteldrmfb (fb0) is primary device
[ 3.713105] cdc_acm 8-4:1.1: ttyACM0: USB ACM device
[ 3.713903] cdc_acm 8-4:1.3: ttyACM1: USB ACM device
[ 3.714905] cdc_acm 8-4:1.9: ttyACM2: USB ACM device
[ 3.715895] usbcore: registered new interface driver cdc_acm
[ 3.715898] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 3.723587] cdc_ether 8-4:1.7: wwan0: register 'cdc_ether' at usb-0000:00:1d.7-4, Mobile Broadband Network Device, 02:80:37:ec:02:00
[ 3.723614] usbcore: registered new interface driver cdc_ether
[ 3.723883] cdc_wdm 8-4:1.5: cdc-wdm-176: USB WDM device
[ 3.723969] cdc_wdm 8-4:1.6: cdc-wdm-175: USB WDM device
[ 3.723987] usbcore: registered new interface driver cdc_wdm
[ 3.842511] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 3.860753] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input6
[ 4.169623] Console: switching to colour frame buffer device 160x50
[ 4.179064] fb0: inteldrmfb frame buffer device
[ 4.179068] drm: registered panic notifier
[ 4.179107] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 4.179329] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[ 4.179366] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 4.224097] hda_codec: CX20561 (Hermosa): BIOS auto-probing.
[ 4.225534] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
[ 4.227428] ACPI: resource 0000:00:1f.3 [io 0x0400-0x041f] conflicts with ACPI region SMBI [io 0x400-0x41f]
[ 4.227436] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.685143] EXT4-fs (sda6): re-mounted. Opts: (null)
[ 4.746136] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[ 4.783042] loop: module loaded
[ 5.184987] FAT-fs (sda5): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 5.693595] RPC: Registered named UNIX socket transport module.
[ 5.693603] RPC: Registered udp transport module.
[ 5.693608] RPC: Registered tcp transport module.
[ 5.693612] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 5.703985] FS-Cache: Loaded
[ 5.722978] FS-Cache: Netfs 'nfs' registered for caching
[ 5.734271] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 6.390127] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 6.390130] Bluetooth: BNEP filters: protocol multicast
[ 6.390998] Bluetooth: RFCOMM TTY layer initialized
[ 6.391003] Bluetooth: RFCOMM socket layer initialized
[ 6.391004] Bluetooth: RFCOMM ver 1.11
[ 6.457517] lp: driver loaded but no devices found
[ 6.464867] ppdev: user-space parallel port driver
[ 6.560326] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[ 6.664179] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[ 6.665716] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6.673325] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
[ 6.676259] iwlwifi 0000:02:00.0: Radio type=0x0-0x2-0x0
[ 6.828943] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
[ 6.831872] iwlwifi 0000:02:00.0: Radio type=0x0-0x2-0x0
[ 6.880819] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 7.156392] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input8
[ 13.319148] wlan0: authenticate with f0:84:2f:e4:66:79 (try 1)
[ 13.320931] wlan0: authenticated
[ 13.327172] wlan0: associate with f0:84:2f:e4:66:79 (try 1)
[ 13.330368] wlan0: RX AssocResp from f0:84:2f:e4:66:79 (capab=0x411 status=0 aid=4)
[ 13.330370] wlan0: associated
[ 13.340295] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 13.340345] cfg80211: Calling CRDA for country: CH
[ 13.350319] cfg80211: Regulatory domain changed to country: CH
[ 13.350327] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 13.350335] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 13.350343] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[ 13.350349] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[ 13.350356] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2700 mBm)
[ 13.350363] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
[ 21.310109] iwlwifi 0000:02:00.0: Tx aggregation enabled on ra = f0:84:2f:e4:66:79 tid = 0