| [ 0.000000] Initializing cgroup subsys cpuset |
| [ 0.000000] Initializing cgroup subsys cpu |
| [ 0.000000] Initializing cgroup subsys cpuacct |
| [ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01) |
| [ 0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.1:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=tty0 console=ttyS0,115200n8 rw BOOT_IMAGE=vmlinuz-cb-test-tgt |
| [ 0.000000] e820: BIOS-provided physical RAM map: |
| [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff9afff] usable |
| [ 0.000000] BIOS-e820: [mem 0x00000000bff9b000-0x00000000cfffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable |
| [ 0.000000] NX (Execute Disable) protection: active |
| [ 0.000000] SMBIOS 2.7 present. |
| [ 0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS 4.1-317-g43213be-dirty 08/20/2015 |
| [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable |
| [ 0.000000] AGP: No AGP bridge found |
| [ 0.000000] e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000 |
| [ 0.000000] MTRR default type: uncachable |
| [ 0.000000] MTRR fixed ranges enabled: |
| [ 0.000000] 00000-9FFFF write-back |
| [ 0.000000] A0000-BFFFF uncachable |
| [ 0.000000] C0000-FFFFF write-back |
| [ 0.000000] MTRR variable ranges enabled: |
| [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back |
| [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back |
| [ 0.000000] 2 base 0000F8000000 mask FFFFFC000000 write-combining |
| [ 0.000000] 3 disabled |
| [ 0.000000] 4 disabled |
| [ 0.000000] 5 disabled |
| [ 0.000000] 6 disabled |
| [ 0.000000] 7 disabled |
| [ 0.000000] TOM2: 0000000180000000 aka 6144M |
| [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 |
| [ 0.000000] e820: last_pfn = 0xbff9b max_arch_pfn = 0x400000000 |
| [ 0.000000] found SMP MP-table at [mem 0x000f1cf0-0x000f1cff] mapped at [ffff8800000f1cf0] |
| [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 |
| [ 0.000000] Using GB pages for direct mapping |
| [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] |
| [ 0.000000] [mem 0x00000000-0x000fffff] page 4k |
| [ 0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE |
| [ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE |
| [ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE |
| [ 0.000000] init_memory_mapping: [mem 0x17fe00000-0x17fffffff] |
| [ 0.000000] [mem 0x17fe00000-0x17fffffff] page 1G |
| [ 0.000000] init_memory_mapping: [mem 0x17c000000-0x17fdfffff] |
| [ 0.000000] [mem 0x17c000000-0x17fdfffff] page 1G |
| [ 0.000000] init_memory_mapping: [mem 0x100000000-0x17bffffff] |
| [ 0.000000] [mem 0x100000000-0x17bffffff] page 1G |
| [ 0.000000] init_memory_mapping: [mem 0x00100000-0xbff9afff] |
| [ 0.000000] [mem 0x00100000-0x001fffff] page 4k |
| [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M |
| [ 0.000000] [mem 0x40000000-0x7fffffff] page 1G |
| [ 0.000000] [mem 0x80000000-0xbfdfffff] page 2M |
| [ 0.000000] [mem 0xbfe00000-0xbff9afff] page 4k |
| [ 0.000000] RAMDISK: [mem 0x7f775000-0x7fffefff] |
| [ 0.000000] ACPI: Early table checksum verification disabled |
| [ 0.000000] ACPI: RSDP 0x00000000000F1EC0 000024 (v02 CORE ) |
| [ 0.000000] ACPI: XSDT 0x00000000BFFB40E0 00006C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: FACP 0x00000000BFFB68D0 000074 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: DSDT 0x00000000BFFB4280 002644 (v02 ASUS COREBOOT 00000001 INTL 20150204) |
| [ 0.000000] ACPI: FACS 0x00000000BFFB4240 000040 |
| [ 0.000000] ACPI: SSDT 0x00000000BFFB69D0 000E57 (v02 CORE COREBOOT 0000002A CORE 0000002A) |
| [ 0.000000] ACPI: TCPA 0x00000000BFFB7830 000032 (v02 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: APIC 0x00000000BFFB7870 0000C6 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SRAT 0x00000000BFFB7940 000178 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SLIT 0x00000000BFFB7AB8 000030 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: HPET 0x00000000BFFB7AF0 000038 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SRAT 0x00000000BFFB7B30 000178 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SLIT 0x00000000BFFB7CA8 000030 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0 |
| [ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0 |
| [ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0 |
| [ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0 |
| [ 0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1 |
| [ 0.000000] SRAT: PXM 1 -> APIC 0x05 -> Node 1 |
| [ 0.000000] SRAT: PXM 1 -> APIC 0x06 -> Node 1 |
| [ 0.000000] SRAT: PXM 1 -> APIC 0x07 -> Node 1 |
| [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff] |
| [ 0.000000] SRAT: Node 2 PXM 7 [mem 0x00100000-0xbfffffff] |
| [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff] |
| [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x13fffffff] |
| [ 0.000000] SRAT: Node 1 PXM 1 [mem 0x140000000-0x17fffffff] |
| [ 0.000000] NUMA: Initialized distance table, cnt=3 |
| [ 0.000000] NUMA: node 2 [mem 0x00100000-0xbfffffff] overlaps with node 0 [mem 0x00100000-0xbfffffff] |
| [ 0.000000] Scanning NUMA topology in Northbridge 24 |
| [ 0.000000] Number of physical nodes 2 |
| [ 0.000000] Node 0 MemBase 0000000000000000 Limit 0000000140000000 |
| [ 0.000000] Node 1 MemBase 0000000140000000 Limit 0000000180000000 |
| [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff] |
| [ 0.000000] NODE_DATA [mem 0x13fffb000-0x13fffffff] |
| [ 0.000000] Initmem setup node 1 [mem 0x140000000-0x17fffffff] |
| [ 0.000000] NODE_DATA [mem 0x17fff9000-0x17fffdfff] |
| [ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013be00000-ffff88013f5fffff] on node 0 |
| [ 0.000000] [ffffea0004600000-ffffea00053fffff] PMD -> [ffff88017e600000-ffff88017f3fffff] on node 1 |
| [ 0.000000] Zone ranges: |
| [ 0.000000] DMA [mem 0x00001000-0x00ffffff] |
| [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] |
| [ 0.000000] Normal [mem 0x100000000-0x17fffffff] |
| [ 0.000000] Movable zone start for each node |
| [ 0.000000] Early memory node ranges |
| [ 0.000000] node 0: [mem 0x00001000-0x0009efff] |
| [ 0.000000] node 0: [mem 0x00100000-0xbff9afff] |
| [ 0.000000] node 0: [mem 0x100000000-0x13fffffff] |
| [ 0.000000] node 1: [mem 0x140000000-0x17fffffff] |
| [ 0.000000] On node 0 totalpages: 1048377 |
| [ 0.000000] DMA zone: 56 pages used for memmap |
| [ 0.000000] DMA zone: 21 pages reserved |
| [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 |
| [ 0.000000] DMA32 zone: 10695 pages used for memmap |
| [ 0.000000] DMA32 zone: 782235 pages, LIFO batch:31 |
| [ 0.000000] Normal zone: 3584 pages used for memmap |
| [ 0.000000] Normal zone: 262144 pages, LIFO batch:31 |
| [ 0.000000] On node 1 totalpages: 262144 |
| [ 0.000000] Normal zone: 3584 pages used for memmap |
| [ 0.000000] Normal zone: 262144 pages, LIFO batch:31 |
| [ 0.000000] ACPI: PM-Timer IO Port: 0x2008 |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) |
| [ 0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0]) |
| [ 0.000000] IOAPIC[0]: apic_id 24, version 17, address 0xfec00000, GSI 0-23 |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) |
| [ 0.000000] ACPI: IRQ9 used by override. |
| [ 0.000000] ACPI: IRQ14 used by override. |
| [ 0.000000] ACPI: IRQ15 used by override. |
| [ 0.000000] Using ACPI (MADT) for SMP configuration information |
| [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 |
| [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs |
| [ 0.000000] nr_irqs_gsi: 40 |
| [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xbff9b000-0xcfffffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xffffffff] |
| [ 0.000000] e820: [mem 0xd0000000-0xffffffff] available for PCI devices |
| [ 0.000000] Booting paravirtualized kernel on bare hardware |
| [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:2 |
| [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s80896 r8192 d21504 u524288 |
| [ 0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152 |
| [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [1] 4 5 6 7 |
| [ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 1292581 |
| [ 0.000000] Policy zone: Normal |
| [ 0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.1:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=tty0 console=ttyS0,115200n8 rw BOOT_IMAGE=vmlinuz-cb-test-tgt |
| [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) |
| [ 0.000000] AGP: Checking aperture... |
| [ 0.000000] AGP: No AGP bridge found |
| [ 0.000000] AGP: Node 0: aperture [bus addr 0xe5fa000000-0xe5fbffffff] (32MB) |
| [ 0.000000] Aperture beyond 4GB. Ignoring. |
| [ 0.000000] AGP: Your BIOS doesn't leave a aperture memory hole |
| [ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup |
| [ 0.000000] AGP: This costs you 64MB of RAM |
| [ 0.000000] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB) |
| [ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff] |
| [ 0.000000] Memory: 5017492K/5242084K available (5203K kernel code, 943K rwdata, 1832K rodata, 1204K init, 840K bss, 224592K reserved) |
| [ 0.000000] Hierarchical RCU implementation. |
| [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. |
| [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8. |
| [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 |
| [ 0.000000] NR_IRQS:33024 nr_irqs:744 16 |
| [ 0.000000] spurious 8259A interrupt: IRQ7. |
| [ 0.000000] Console: colour VGA+ 80x25 |
| [ 0.000000] console [tty0] enabled |
| [ 0.000000] console [ttyS0] enabled |
| [ 0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl |
| [ 0.000000] hpet clockevent registered |
| [ 0.000000] tsc: Fast TSC calibration using PIT |
| [ 0.000000] tsc: Detected 1909.839 MHz processor |
| [ 0.000159] Calibrating delay loop (skipped), value calculated using timer frequency.. 3819.67 BogoMIPS (lpj=7639356) |
| [ 0.010953] pid_max: default: 32768 minimum: 301 |
| [ 0.015676] ACPI: Core revision 20140424 |
| [ 0.022120] ACPI: All ACPI Tables successfully acquired |
| [ 0.027627] Security Framework initialized |
| [ 0.031806] AppArmor: AppArmor disabled by boot time parameter |
| [ 0.037715] Yama: disabled by default; enable with sysctl kernel.yama.* |
| [ 0.045530] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) |
| [ 0.058856] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) |
| [ 0.068770] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) |
| [ 0.075792] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) |
| [ 0.083757] Initializing cgroup subsys memory |
| [ 0.088217] Initializing cgroup subsys devices |
| [ 0.092761] Initializing cgroup subsys freezer |
| [ 0.097286] Initializing cgroup subsys net_cls |
| [ 0.101846] Initializing cgroup subsys blkio |
| [ 0.106202] Initializing cgroup subsys perf_event |
| [ 0.111000] Initializing cgroup subsys net_prio |
| [ 0.115666] tseg: 0000000000 |
| [ 0.115680] CPU: Physical Processor ID: 0 |
| [ 0.119799] CPU: Processor Core ID: 0 |
| [ 0.124593] mce: CPU supports 6 MCE banks |
| [ 0.128739] LVT offset 0 assigned for vector 0xf9 |
| [ 0.133530] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8 |
| Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0 |
| tlb_flushall_shift: 6 |
| [ 0.149020] Freeing SMP alternatives memory: 20K (ffffffff81a1a000 - ffffffff81a1f000) |
| [ 0.158156] ftrace: allocating 21601 entries in 85 pages |
| [ 0.173666] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0 |
| [ 0.219310] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 8347 (fam: 10, model: 02, stepping: 01) |
| [ 0.336310] Performance Events: AMD PMU driver. |
| [ 0.341036] ... version: 0 |
| [ 0.345120] ... bit width: 48 |
| [ 0.349313] ... generic registers: 4 |
| [ 0.353411] ... value mask: 0000ffffffffffff |
| [ 0.358811] ... max period: 00007fffffffffff |
| [ 0.364200] ... fixed-purpose events: 0 |
| [ 0.368303] ... event mask: 000000000000000f |
| [ 0.376324] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. |
| [ 0.384663] x86: Booting SMP configuration: |
| [ 0.388933] .... node #0, CPUs: #1 #2 #3 |
| [ 0.433520] .... node #1, CPUs: #4 #5 #6 #7 |
| [ 0.585100] x86: Booted up 2 nodes, 8 CPUs |
| [ 0.589543] smpboot: Total of 8 processors activated (30557.95 BogoMIPS) |
| [ 0.602173] devtmpfs: initialized |
| [ 0.614192] pinctrl core: initialized pinctrl subsystem |
| [ 0.619659] NET: Registered protocol family 16 |
| [ 0.624389] cpuidle: using governor ladder |
| [ 0.628564] cpuidle: using governor menu |
| [ 0.632564] node 0 link 1: io port [1000, 3fff] |
| [ 0.632568] TOM: 00000000c0000000 aka 3072M |
| [ 0.636828] Fam 10h mmconf [mem 0xc0000000-0xcfffffff] |
| [ 0.636832] node 0 link 1: mmio [fc000000, fc3fffff] |
| [ 0.636835] node 0 link 1: mmio [f8000000, fbffffff] |
| [ 0.636837] TOM2: 0000000180000000 aka 6144M |
| [ 0.641176] bus: [bus 00-05] on node 0 link 1 |
| [ 0.641178] bus: 00 [io 0x0000-0xffff] |
| [ 0.641180] bus: 00 [mem 0xd0000000-0xffffffff] |
| [ 0.641181] bus: 00 [mem 0x180000000-0xfcffffffff] |
| [ 0.641289] ACPI: bus type PCI registered |
| [ 0.645380] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 |
| [ 0.652060] PCI: Using configuration type 1 for base access |
| [ 0.657710] PCI: Using configuration type 1 for extended access |
| [ 0.664328] mtrr: your CPUs had inconsistent variable MTRR settings |
| [ 0.670702] mtrr: probably your BIOS does not setup all CPUs. |
| [ 0.676527] mtrr: corrected configuration. |
| [ 0.693203] ACPI: Added _OSI(Module Device) |
| [ 0.697500] ACPI: Added _OSI(Processor Device) |
| [ 0.702019] ACPI: Added _OSI(3.0 _SCP Extensions) |
| [ 0.706806] ACPI: Added _OSI(Processor Aggregator Device) |
| [ 0.715883] ACPI: Interpreter enabled |
| [ 0.719630] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580) |
| [ 0.729070] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580) |
| [ 0.738518] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580) |
| [ 0.747972] ACPI: (supports S0 S1 S5) |
| [ 0.751726] ACPI: Using IOAPIC for interrupt routing |
| [ 0.756816] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| [ 0.784808] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05]) |
| [ 0.791079] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] |
| [ 0.799395] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] |
| [ 0.837215] acpi PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x03b0-0x03df] ignored |
| [ 0.847337] PCI host bridge to bus 0000:00 |
| [ 0.851523] pci_bus 0000:00: root bus resource [bus 00-05] |
| [ 0.857098] pci_bus 0000:00: root bus resource [io 0x0d00-0x3fff] |
| [ 0.863364] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] |
| [ 0.870329] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff] |
| [ 0.877296] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc3fffff] |
| [ 0.884267] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] |
| [ 0.890557] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000 |
| [ 0.890745] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100 |
| [ 0.890752] pci 0000:00:01.0: reg 0x10: [io 0x2c00-0x2c7f] |
| [ 0.890890] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500 |
| [ 0.890898] pci 0000:00:01.1: reg 0x10: [io 0x3000-0x301f] |
| [ 0.890922] pci 0000:00:01.1: reg 0x20: [io 0x2c80-0x2cbf] |
| [ 0.890926] pci 0000:00:01.1: reg 0x24: [io 0x2cc0-0x2cff] |
| [ 0.890986] pci 0000:00:01.1: PME# supported from D3hot D3cold |
| [ 0.891088] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310 |
| [ 0.891098] pci 0000:00:02.0: reg 0x10: [mem 0xfc300000-0xfc300fff] |
| [ 0.891134] pci 0000:00:02.0: supports D1 D2 |
| [ 0.891143] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.891215] pci 0000:00:02.0: System wakeup disabled by ACPI |
| [ 0.897038] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320 |
| [ 0.897053] pci 0000:00:02.1: reg 0x10: [mem 0xfc303000-0xfc3030ff] |
| [ 0.897094] pci 0000:00:02.1: supports D1 D2 |
| [ 0.897096] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.897147] pci 0000:00:02.1: System wakeup disabled by ACPI |
| [ 0.902955] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a |
| [ 0.902981] pci 0000:00:06.0: reg 0x20: [io 0x3020-0x302f] |
| [ 0.903009] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] |
| [ 0.910235] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io 0x03f6] |
| [ 0.916853] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] |
| [ 0.924079] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io 0x0376] |
| [ 0.930797] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185 |
| [ 0.930805] pci 0000:00:07.0: reg 0x10: [io 0x3050-0x3057] |
| [ 0.930812] pci 0000:00:07.0: reg 0x14: [io 0x3070-0x3073] |
| [ 0.930817] pci 0000:00:07.0: reg 0x18: [io 0x3058-0x305f] |
| [ 0.930822] pci 0000:00:07.0: reg 0x1c: [io 0x3074-0x3077] |
| [ 0.930826] pci 0000:00:07.0: reg 0x20: [io 0x3030-0x303f] |
| [ 0.930831] pci 0000:00:07.0: reg 0x24: [mem 0xfc301000-0xfc301fff] |
| [ 0.930982] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185 |
| [ 0.930998] pci 0000:00:08.0: reg 0x10: [io 0x3060-0x3067] |
| [ 0.931013] pci 0000:00:08.0: reg 0x14: [io 0x3078-0x307b] |
| [ 0.931018] pci 0000:00:08.0: reg 0x18: [io 0x3068-0x306f] |
| [ 0.931032] pci 0000:00:08.0: reg 0x1c: [io 0x307c-0x307f] |
| [ 0.931047] pci 0000:00:08.0: reg 0x20: [io 0x3040-0x304f] |
| [ 0.931062] pci 0000:00:08.0: reg 0x24: [mem 0xfc302000-0xfc302fff] |
| [ 0.931217] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400 |
| [ 0.931340] pci 0000:00:09.0: System wakeup disabled by ACPI |
| [ 0.937126] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400 |
| [ 0.937175] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.937228] pci 0000:00:0b.0: System wakeup disabled by ACPI |
| [ 0.943043] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400 |
| [ 0.943098] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.943148] pci 0000:00:0c.0: System wakeup disabled by ACPI |
| [ 0.948947] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400 |
| [ 0.948987] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.949044] pci 0000:00:0d.0: System wakeup disabled by ACPI |
| [ 0.954854] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400 |
| [ 0.954895] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.954960] pci 0000:00:0e.0: System wakeup disabled by ACPI |
| [ 0.960771] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000 |
| [ 0.960932] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000 |
| [ 0.961036] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000 |
| [ 0.961148] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000 |
| [ 0.961292] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000 |
| [ 0.961399] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000 |
| [ 0.961550] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000 |
| [ 0.961699] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000 |
| [ 0.961830] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000 |
| [ 0.962035] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000 |
| [ 0.962217] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000 |
| [ 0.962242] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref] |
| [ 0.962259] pci 0000:01:04.0: reg 0x14: [mem 0xfc000000-0xfc03ffff] |
| [ 0.962274] pci 0000:01:04.0: reg 0x18: [io 0x1000-0x107f] |
| [ 0.962309] pci 0000:01:04.0: supports D1 D2 |
| [ 0.962435] pci 0000:00:09.0: PCI bridge to [bus 01] |
| [ 0.967489] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff] |
| [ 0.967493] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff] |
| [ 0.967496] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref] |
| [ 0.967612] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000 |
| [ 0.967646] pci 0000:02:00.0: reg 0x10: [mem 0xfc100000-0xfc10ffff 64bit] |
| [ 0.967682] pci 0000:02:00.0: reg 0x30: [mem 0x68400000-0x6840ffff pref] |
| [ 0.967773] pci 0000:02:00.0: PME# supported from D3hot D3cold |
| [ 0.967866] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' |
| [ 0.977999] pci 0000:00:0b.0: PCI bridge to [bus 02] |
| [ 0.983049] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff] |
| [ 0.983158] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000 |
| [ 0.983190] pci 0000:03:00.0: reg 0x10: [mem 0xfc200000-0xfc20ffff 64bit] |
| [ 0.983299] pci 0000:03:00.0: PME# supported from D3hot D3cold |
| [ 0.983388] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' |
| [ 0.993523] pci 0000:00:0c.0: PCI bridge to [bus 03] |
| [ 0.998575] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff] |
| [ 0.998649] pci 0000:00:0d.0: PCI bridge to [bus 04] |
| [ 1.003779] pci 0000:00:0e.0: PCI bridge to [bus 05] |
| [ 1.008852] pci_bus 0000:00: on NUMA node 0 |
| [ 1.008950] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19) |
| [ 1.015389] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19) |
| [ 1.021817] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled. |
| [ 1.029478] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled. |
| [ 1.037140] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled. |
| [ 1.044827] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.052487] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23) |
| [ 1.058919] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23) |
| [ 1.065329] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.072986] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.080631] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.088297] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23) |
| [ 1.094716] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23) |
| [ 1.101150] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.108810] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.116476] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.124158] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. |
| [ 1.133271] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled. |
| [ 1.139998] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled. |
| [ 1.146713] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled. |
| [ 1.153436] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled. |
| [ 1.160399] ACPI: Enabled 1 GPEs in block 00 to 1F |
| [ 1.165672] vgaarb: setting as boot device: PCI:0000:01:04.0 |
| [ 1.171451] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none |
| [ 1.179654] vgaarb: loaded |
| [ 1.182456] vgaarb: bridge control possible 0000:01:04.0 |
| [ 1.188023] PCI: Using ACPI for IRQ routing |
| [ 1.192297] PCI: pci_cache_line_size set to 64 bytes |
| [ 1.192354] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] |
| [ 1.192358] e820: reserve RAM buffer [mem 0xbff9b000-0xbfffffff] |
| [ 1.192671] HPET: 3 timers in total, 0 timers will be used for per-cpu timer |
| [ 1.199806] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 |
| [ 1.205072] hpet0: 3 comparators, 32-bit 25.000000 MHz counter |
| [ 1.213804] Switched to clocksource hpet |
| [ 1.229386] pnp: PnP ACPI init |
| [ 1.232600] ACPI: bus type PNP registered |
| [ 1.237235] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) |
| [ 1.237315] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active) |
| [ 1.237413] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active) |
| [ 1.237492] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active) |
| [ 1.237533] pnp 00:04: [dma 2] |
| [ 1.237575] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active) |
| [ 1.237597] pnp: PnP ACPI: found 5 devices |
| [ 1.241794] ACPI: bus type PNP unregistered |
| [ 1.253885] pci 0000:02:00.0: can't claim BAR 6 [mem 0x68400000-0x6840ffff pref]: no compatible bridge window |
| [ 1.263953] pci 0000:00:09.0: PCI bridge to [bus 01] |
| [ 1.269023] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff] |
| [ 1.275203] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff] |
| [ 1.282076] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref] |
| [ 1.289415] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc110000-0xfc11ffff pref] |
| [ 1.296779] pci 0000:00:0b.0: PCI bridge to [bus 02] |
| [ 1.301834] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff] |
| [ 1.308707] pci 0000:00:0c.0: PCI bridge to [bus 03] |
| [ 1.313750] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff] |
| [ 1.320627] pci 0000:00:0d.0: PCI bridge to [bus 04] |
| [ 1.325667] pci 0000:00:0e.0: PCI bridge to [bus 05] |
| [ 1.330718] pci_bus 0000:00: resource 4 [io 0x0d00-0x3fff] |
| [ 1.330721] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff] |
| [ 1.330724] pci_bus 0000:00: resource 6 [mem 0xf8000000-0xfbffffff] |
| [ 1.330727] pci_bus 0000:00: resource 7 [mem 0xfc000000-0xfc3fffff] |
| [ 1.330729] pci_bus 0000:00: resource 8 [io 0x0000-0x0cf7] |
| [ 1.330732] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] |
| [ 1.330735] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff] |
| [ 1.330737] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref] |
| [ 1.330740] pci_bus 0000:02: resource 1 [mem 0xfc100000-0xfc1fffff] |
| [ 1.330743] pci_bus 0000:03: resource 1 [mem 0xfc200000-0xfc2fffff] |
| [ 1.330874] NET: Registered protocol family 2 |
| [ 1.335808] TCP established hash table entries: 65536 (order: 7, 524288 bytes) |
| [ 1.343628] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) |
| [ 1.351044] TCP: Hash tables configured (established 65536 bind 65536) |
| [ 1.357732] TCP: reno registered |
| [ 1.361052] UDP hash table entries: 4096 (order: 5, 131072 bytes) |
| [ 1.367330] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) |
| [ 1.374202] NET: Registered protocol family 1 |
| [ 1.379042] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23 |
| [ 1.385200] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22 |
| [ 1.391231] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.396846] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.402455] pci 0000:00:0b.0: Found disabled HT MSI Mapping |
| [ 1.408139] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.413775] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.419347] pci 0000:00:0c.0: Found disabled HT MSI Mapping |
| [ 1.425006] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.430623] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.436207] pci 0000:00:0d.0: Found disabled HT MSI Mapping |
| [ 1.441867] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.447474] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.453066] pci 0000:00:0e.0: Found disabled HT MSI Mapping |
| [ 1.458725] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.464323] pci 0000:01:04.0: Video device with shadowed ROM |
| [ 1.464332] PCI: CLS 64 bytes, default 64 |
| [ 1.464440] Unpacking initramfs... |
| [ 1.697408] Freeing initrd memory: 8744K (ffff88007f775000 - ffff88007ffff000) |
| [ 1.705398] PCI-DMA: Disabling AGP. |
| [ 1.710605] PCI-DMA: aperture base @ b4000000 size 65536 KB |
| [ 1.716271] PCI-DMA: using GART IOMMU. |
| [ 1.720093] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture |
| [ 1.732173] platform rtc_cmos: registered platform RTC device (no PNP device found) |
| [ 1.740523] microcode: CPU0: patch_level=0x01000096 |
| [ 1.745525] microcode: CPU1: patch_level=0x01000096 |
| [ 1.750533] microcode: CPU2: patch_level=0x01000096 |
| [ 1.755545] microcode: CPU3: patch_level=0x01000096 |
| [ 1.760559] microcode: CPU4: patch_level=0x01000096 |
| [ 1.765553] microcode: CPU5: patch_level=0x01000096 |
| [ 1.771637] microcode: CPU6: patch_level=0x01000096 |
| [ 1.776625] microcode: CPU7: patch_level=0x01000096 |
| [ 1.781709] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba |
| [ 1.790659] LVT offset 1 assigned for vector 0x400 |
| [ 1.795572] IBS: LVT offset 1 assigned |
| [ 1.799444] perf: AMD IBS detected (0x00000007) |
| [ 1.804669] futex hash table entries: 2048 (order: 5, 131072 bytes) |
| [ 1.811151] audit: initializing netlink subsys (disabled) |
| [ 1.816663] audit: type=2000 audit(1440099252.628:1): initialized |
| [ 1.823627] HugeTLB registered 2 MB page size, pre-allocated 0 pages |
| [ 1.830128] zbud: loaded |
| [ 1.833088] VFS: Disk quotas dquot_6.5.2 |
| [ 1.837138] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) |
| [ 1.843783] msgmni has been set to 9945 |
| [ 1.848230] alg: No test for stdrng (krng) |
| [ 1.852529] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) |
| [ 1.860178] io scheduler noop registered |
| [ 1.864214] io scheduler deadline registered |
| [ 1.868642] io scheduler cfq registered (default) |
| [ 1.873686] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X |
| [ 1.873839] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X |
| [ 1.873965] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X |
| [ 1.874091] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X |
| [ 1.874262] aer 0000:00:0b.0:pcie02: service driver aer loaded |
| [ 1.874291] aer 0000:00:0c.0:pcie02: service driver aer loaded |
| [ 1.874317] aer 0000:00:0d.0:pcie02: service driver aer loaded |
| [ 1.874343] aer 0000:00:0e.0:pcie02: service driver aer loaded |
| [ 1.874364] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt |
| [ 1.881473] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt |
| [ 1.888094] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded |
| [ 1.888105] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt |
| [ 1.895147] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt |
| [ 1.901758] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded |
| [ 1.901769] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt |
| [ 1.908810] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded |
| [ 1.908821] pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt |
| [ 1.915873] pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded |
| [ 1.915903] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 |
| [ 1.921596] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 |
| [ 1.928426] GHES: HEST is not enabled! |
| [ 1.932375] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
| [ 1.959160] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A |
| [ 1.986937] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A |
| [ 1.994981] Linux agpgart interface v0.103 |
| [ 1.999414] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12 |
| [ 2.010096] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| [ 2.015196] serio: i8042 AUX port at 0x60,0x64 irq 12 |
| [ 2.020531] mousedev: PS/2 mouse device common for all mice |
| [ 2.026334] rtc_cmos rtc_cmos: RTC can wake from S4 |
| [ 2.031525] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 |
| [ 2.038030] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs |
| [ 2.046013] ledtrig-cpu: registered to indicate activity on CPUs |
| [ 2.052276] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com> |
| [ 2.058809] AMD IOMMUv2 functionality not available on this system |
| [ 2.065214] TCP: cubic registered |
| [ 2.068769] NET: Registered protocol family 10 |
| [ 2.073718] mip6: Mobile IPv6 |
| [ 2.076785] NET: Registered protocol family 17 |
| [ 2.081371] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 |
| [ 2.090132] mpls_gso: MPLS GSO support |
| [ 2.094858] registered taskstats version 1 |
| [ 2.099808] rtc_cmos rtc_cmos: setting system clock to 2015-08-20 19:34:14 UTC (1440099254) |
| [ 2.108396] PM: Hibernation image not present or could not be loaded. |
| [ 2.110209] Freeing unused kernel memory: 1204K (ffffffff818ed000 - ffffffff81a1a000) |
| [ 2.118215] Write protecting the kernel read-only data: 8192k |
| [ 2.127543] Freeing unused kernel memory: 928K (ffff880001518000 - ffff880001600000) |
| [ 2.136284] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000) |
| [ 2.160353] systemd-udevd[99]: starting version 215 |
| [ 2.166211] random: systemd-udevd urandom read with 4 bits of entropy available |
| [ 2.197954] pps_core: LinuxPPS API ver. 1 registered |
| [ 2.203014] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> |
| [ 2.212676] ACPI: bus type USB registered |
| [ 2.216991] usbcore: registered new interface driver usbfs |
| [ 2.217043] PTP clock support registered |
| [ 2.226686] usbcore: registered new interface driver hub |
| [ 2.232369] usbcore: registered new device driver usb |
| [ 2.232448] tg3.c:v3.137 (May 11, 2014) |
| [ 2.232461] tg3 0000:02:00.0: enabling device (0004 -> 0006) |
| [ 2.232665] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17 |
| [ 2.254048] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| [ 2.261705] ehci-pci: EHCI PCI platform driver |
| [ 2.266484] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver |
| [ 2.266591] ehci-pci 0000:00:02.1: EHCI Host Controller |
| [ 2.266605] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1 |
| [ 2.266624] ehci-pci 0000:00:02.1: debug port 1 |
| [ 2.266670] ehci-pci 0000:00:02.1: cache line size of 64 is not supported |
| [ 2.266698] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc303000 |
| [ 2.277463] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00 |
| [ 2.277541] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 |
| [ 2.277543] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.277545] usb usb1: Product: EHCI Host Controller |
| [ 2.277546] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd |
| [ 2.277547] usb usb1: SerialNumber: 0000:00:02.1 |
| [ 2.277925] hub 1-0:1.0: USB hub found |
| [ 2.277934] hub 1-0:1.0: 10 ports detected |
| [ 2.340378] ohci-pci: OHCI PCI platform driver |
| [ 2.345202] ohci-pci 0000:00:02.0: OHCI PCI host controller |
| [ 2.350943] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2 |
| [ 2.358526] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc300000 |
| [ 2.388859] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:61:a2 |
| [ 2.399252] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) |
| [ 2.409139] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] |
| [ 2.417110] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit] |
| [ 2.425462] tg3 0000:03:00.0: enabling device (0004 -> 0006) |
| [ 2.426074] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 |
| [ 2.426076] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.426078] usb usb2: Product: OHCI PCI host controller |
| [ 2.426079] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd |
| [ 2.426080] usb usb2: SerialNumber: 0000:00:02.0 |
| [ 2.426272] hub 2-0:1.0: USB hub found |
| [ 2.426282] hub 2-0:1.0: 10 ports detected |
| [ 2.469723] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16 |
| [ 2.525870] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:63:95 |
| [ 2.536296] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) |
| [ 2.546166] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] |
| [ 2.554124] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit] |
| [ 2.567401] FS-Cache: Loaded |
| [ 2.574635] RPC: Registered named UNIX socket transport module. |
| [ 2.581265] RPC: Registered udp transport module. |
| [ 2.587332] RPC: Registered tcp transport module. |
| [ 2.593487] RPC: Registered tcp NFSv4.1 backchannel transport module. |
| [ 2.605801] FS-Cache: Netfs 'nfs' registered for caching |
| [ 2.619760] tg3 0000:02:00.0: irq 44 for MSI/MSI-X |
| [ 2.665429] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready |
| [ 2.729302] tsc: Refined TSC clocksource calibration: 1909.787 MHz |
| [ 3.733036] Switched to clocksource tsc |
| [ 4.236976] tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex |
| [ 4.243650] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX |
| [ 4.250613] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready |
| [ 7.472091] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR) |
| [ 7.485955] systemd[1]: Detected architecture 'x86-64'. |
| [ 9.151485] systemd[1]: Inserted module 'autofs4' |
| [ 9.160493] systemd[1]: Set hostname to <cb-test-tgt>. |
| [ 9.366486] random: nonblocking pool is initialized |
| [ 11.059365] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory. |
| [ 11.072386] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. |
| [ 11.087948] systemd[1]: Expecting device dev-ttyS0.device... |
| [ 11.102463] systemd[1]: Starting Forward Password Requests to Wall Directory Watch. |
| [ 11.110308] systemd[1]: Started Forward Password Requests to Wall Directory Watch. |
| [ 11.118016] systemd[1]: Starting Remote File Systems (Pre). |
| [ 11.134514] systemd[1]: Reached target Remote File Systems (Pre). |
| [ 11.140895] systemd[1]: Starting Encrypted Volumes. |
| [ 11.154422] systemd[1]: Reached target Encrypted Volumes. |
| [ 11.159947] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch. |
| [ 11.168160] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. |
| [ 11.176228] systemd[1]: Starting Paths. |
| [ 11.190493] systemd[1]: Reached target Paths. |
| [ 11.195180] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point. |
| [ 11.218411] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. |
| [ 11.227988] systemd[1]: Starting Swap. |
| [ 11.242397] systemd[1]: Reached target Swap. |
| [ 11.246805] systemd[1]: Starting Root Slice. |
| [ 11.258400] systemd[1]: Created slice Root Slice. |
| [ 11.263237] systemd[1]: Starting User and Session Slice. |
| [ 11.278384] systemd[1]: Created slice User and Session Slice. |
| [ 11.284261] systemd[1]: Starting Delayed Shutdown Socket. |
| [ 11.298369] systemd[1]: Listening on Delayed Shutdown Socket. |
| [ 11.304231] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. |
| [ 11.322360] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. |
| [ 11.329441] systemd[1]: Starting Journal Socket (/dev/log). |
| [ 11.346362] systemd[1]: Listening on Journal Socket (/dev/log). |
| [ 11.352428] systemd[1]: Starting udev Kernel Socket. |
| [ 11.370355] systemd[1]: Listening on udev Kernel Socket. |
| [ 11.375821] systemd[1]: Starting udev Control Socket. |
| [ 11.390345] systemd[1]: Listening on udev Control Socket. |
| [ 11.395899] systemd[1]: Starting Journal Socket. |
| [ 11.410327] systemd[1]: Listening on Journal Socket. |
| [ 11.415415] systemd[1]: Starting System Slice. |
| [ 11.430324] systemd[1]: Created slice System Slice. |
| [ 11.435324] systemd[1]: Starting system-getty.slice. |
| [ 11.450326] systemd[1]: Created slice system-getty.slice. |
| [ 11.455868] systemd[1]: Starting system-serial\x2dgetty.slice. |
| [ 11.470318] systemd[1]: Created slice system-serial\x2dgetty.slice. |
| [ 11.476751] systemd[1]: Starting Increase datagram queue length... |
| [ 11.495362] systemd[1]: Mounting Debug File System... |
| [ 11.511383] systemd[1]: Mounting POSIX Message Queue File System... |
| [ 11.562146] systemd[1]: Starting Load Kernel Modules... |
| [ 11.913236] systemd[1]: Started Set Up Additional Binary Formats. |
| [ 11.922406] systemd[1]: Starting Create list of required static device nodes for the current kernel... |
| [ 11.947822] systemd[1]: Starting udev Coldplug all Devices... |
| [ 11.963639] systemd[1]: Mounting Huge Pages File System... |
| [ 11.979918] systemd[1]: Starting Slices. |
| [ 11.994173] systemd[1]: Reached target Slices. |
| [ 11.998922] systemd[1]: Starting Remount Root and Kernel File Systems... |
| [ 12.921936] systemd[1]: Started Increase datagram queue length. |
| [ 12.928782] systemd[1]: Starting Syslog Socket. |
| [ 12.941893] systemd[1]: Listening on Syslog Socket. |
| [ 12.946967] systemd[1]: Starting Sockets. |
| [ 12.961861] systemd[1]: Reached target Sockets. |
| [ 12.966665] systemd[1]: Starting Journal Service... |
| [ 12.993877] systemd[1]: Started Journal Service. |
| [ 15.713682] systemd-udevd[188]: starting version 215 |
| [ 15.746481] systemd-journald[172]: Received request to flush runtime journal from PID 1 |
| [ 23.482134] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled |
| [ 23.490455] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled |
| [ 23.617938] EDAC MC: Ver: 3.0.0 |
| [ 24.282507] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 |
| [ 24.478944] MCE: In-kernel MCE decoding enabled. |
| [ 24.484720] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 |
| [ 24.493188] ACPI: Power Button [PWRB] |
| [ 24.497044] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 |
| [ 24.504561] ACPI: Power Button [PWRF] |
| [ 24.865667] SCSI subsystem initialized |
| [ 24.973548] FDC 0 is a post-1991 82077 |
| [ 24.997004] AMD64 EDAC driver v3.4.0 |
| [ 25.000805] EDAC amd64: DRAM ECC enabled. |
| [ 25.004943] EDAC amd64: F10h detected (node 0). |
| [ 25.009582] EDAC MC: DCT0 chip selects: |
| [ 25.009584] EDAC amd64: MC: 0: 0MB 1: 0MB |
| [ 25.014378] EDAC amd64: MC: 2: 0MB 3: 0MB |
| [ 25.019176] EDAC amd64: MC: 4: 0MB 5: 0MB |
| [ 25.023966] EDAC amd64: MC: 6: 1024MB 7: 1024MB |
| [ 25.028758] EDAC MC: DCT1 chip selects: |
| [ 25.028760] EDAC amd64: MC: 0: 0MB 1: 0MB |
| [ 25.033549] EDAC amd64: MC: 2: 0MB 3: 0MB |
| [ 25.038340] EDAC amd64: MC: 4: 0MB 5: 0MB |
| [ 25.043131] EDAC amd64: MC: 6: 1024MB 7: 1024MB |
| [ 25.047921] EDAC amd64: using x4 syndromes. |
| [ 25.052234] EDAC amd64: MCT channel count: 2 |
| [ 25.056722] EDAC amd64: CS6: Registered DDR2 RAM |
| [ 25.061535] EDAC amd64: CS7: Registered DDR2 RAM |
| [ 25.066522] EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT) |
| [ 25.076372] EDAC amd64: DRAM ECC enabled. |
| [ 25.080559] EDAC amd64: F10h detected (node 1). |
| [ 25.085206] EDAC MC: DCT0 chip selects: |
| [ 25.085208] EDAC amd64: MC: 0: 1024MB 1: 0MB |
| [ 25.090006] EDAC amd64: MC: 2: 0MB 3: 0MB |
| [ 25.094789] EDAC amd64: MC: 4: 0MB 5: 0MB |
| [ 25.099580] EDAC amd64: MC: 6: 0MB 7: 0MB |
| [ 25.104369] EDAC MC: DCT1 chip selects: |
| [ 25.104371] EDAC amd64: MC: 0: 0MB 1: 0MB |
| [ 25.109151] EDAC amd64: MC: 2: 0MB 3: 0MB |
| [ 25.113931] EDAC amd64: MC: 4: 0MB 5: 0MB |
| [ 25.118707] EDAC amd64: MC: 6: 0MB 7: 0MB |
| [ 25.123488] EDAC amd64: using x4 syndromes. |
| [ 25.127741] EDAC amd64: MCT channel count: 1 |
| [ 25.132127] EDAC amd64: CS0: Registered DDR2 RAM |
| [ 25.137029] EDAC MC1: Giving out device to module amd64_edac controller F10h: DEV 0000:00:19.2 (INTERRUPT) |
| [ 25.146888] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED) |
| [ 25.432972] libata version 3.00 loaded. |
| [ 25.486393] i2c i2c-0: nForce2 SMBus adapter at 0x2c80 |
| [ 25.491710] i2c i2c-1: nForce2 SMBus adapter at 0x2cc0 |
| [ 25.602866] sata_nv 0000:00:07.0: version 3.5 |
| [ 25.603164] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21 |
| [ 25.609622] scsi0 : sata_nv |
| [ 25.612736] scsi1 : sata_nv |
| [ 25.615704] ata1: SATA max UDMA/133 cmd 0x3050 ctl 0x3070 bmdma 0x3030 irq 21 |
| [ 25.622951] ata2: SATA max UDMA/133 cmd 0x3058 ctl 0x3074 bmdma 0x3038 irq 21 |
| [ 25.630546] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20 |
| [ 25.630680] acpi-cpufreq: overriding BIOS provided _PSD data |
| [ 25.643684] scsi2 : sata_nv |
| [ 25.647127] scsi3 : sata_nv |
| [ 25.650266] ata3: SATA max UDMA/133 cmd 0x3060 ctl 0x3078 bmdma 0x3040 irq 20 |
| [ 25.657516] ata4: SATA max UDMA/133 cmd 0x3068 ctl 0x307c bmdma 0x3048 irq 20 |
| [ 25.665448] input: PC Speaker as /devices/platform/pcspkr/input/input4 |
| [ 25.676863] pata_amd 0000:00:06.0: version 0.4.1 |
| [ 25.678115] scsi4 : pata_amd |
| [ 25.682371] scsi5 : pata_amd |
| [ 25.686420] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3020 irq 14 |
| [ 25.694221] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3028 irq 15 |
| [ 25.941295] ata1: SATA link down (SStatus 0 SControl 300) |
| [ 25.973276] ata3: SATA link down (SStatus 0 SControl 300) |
| [ 26.257176] ata2: SATA link down (SStatus 0 SControl 300) |
| [ 26.525511] kvm: Nested Virtualization enabled |
| [ 26.530067] kvm: Nested Paging enabled |
| [ 26.573085] ata4: SATA link down (SStatus 0 SControl 300) |
| [ 65.646097] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS***** |