| [ 0.000000] Initializing cgroup subsys cpuset |
| [ 0.000000] Initializing cgroup subsys cpu |
| [ 0.000000] Initializing cgroup subsys cpuacct |
| [ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01) |
| [ 0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=192.168.1.50:/mnt/udata/nfsroots/cb-test-tgt,v3,hard,nointr,tcp ip=192.168.20.36::192.168.20.1:255.255.255.0:embed-o-matic:eth0:off console=tty0 console=ttyS0,115200n8 rw BOOT_IMAGE=vmlinuz-cb-test-tgt |
| [ 0.000000] e820: BIOS-provided physical RAM map: |
| [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dffaafff] usable |
| [ 0.000000] BIOS-e820: [mem 0x00000000dffab000-0x00000000efffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000019fffffff] usable |
| [ 0.000000] NX (Execute Disable) protection: active |
| [ 0.000000] SMBIOS 2.7 present. |
| [ 0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS 4.0-8312-gcea2fcd-dirty 03/15/2015 |
| [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable |
| [ 0.000000] AGP: No AGP bridge found |
| [ 0.000000] e820: last_pfn = 0x1a0000 max_arch_pfn = 0x400000000 |
| [ 0.000000] MTRR default type: uncachable |
| [ 0.000000] MTRR fixed ranges enabled: |
| [ 0.000000] 00000-9FFFF write-back |
| [ 0.000000] A0000-BFFFF uncachable |
| [ 0.000000] C0000-FFFFF write-back |
| [ 0.000000] MTRR variable ranges enabled: |
| [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back |
| [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back |
| [ 0.000000] 2 base 0000C0000000 mask FFFFE0000000 write-back |
| [ 0.000000] 3 base 0000F8000000 mask FFFFFC000000 write-combining |
| [ 0.000000] 4 disabled |
| [ 0.000000] 5 disabled |
| [ 0.000000] 6 disabled |
| [ 0.000000] 7 disabled |
| [ 0.000000] TOM2: 00000001a0000000 aka 6656M |
| [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 |
| [ 0.000000] e820: last_pfn = 0xdffab max_arch_pfn = 0x400000000 |
| [ 0.000000] found SMP MP-table at [mem 0x000f1490-0x000f149f] mapped at [ffff8800000f1490] |
| [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 |
| [ 0.000000] Using GB pages for direct mapping |
| [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] |
| [ 0.000000] [mem 0x00000000-0x000fffff] page 4k |
| [ 0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE |
| [ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE |
| [ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE |
| [ 0.000000] init_memory_mapping: [mem 0x19fe00000-0x19fffffff] |
| [ 0.000000] [mem 0x19fe00000-0x19fffffff] page 2M |
| [ 0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE |
| [ 0.000000] init_memory_mapping: [mem 0x19c000000-0x19fdfffff] |
| [ 0.000000] [mem 0x19c000000-0x19fdfffff] page 2M |
| [ 0.000000] init_memory_mapping: [mem 0x180000000-0x19bffffff] |
| [ 0.000000] [mem 0x180000000-0x19bffffff] page 2M |
| [ 0.000000] init_memory_mapping: [mem 0x00100000-0xdffaafff] |
| [ 0.000000] [mem 0x00100000-0x001fffff] page 4k |
| [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M |
| [ 0.000000] [mem 0x40000000-0xbfffffff] page 1G |
| [ 0.000000] [mem 0xc0000000-0xdfdfffff] page 2M |
| [ 0.000000] [mem 0xdfe00000-0xdffaafff] page 4k |
| [ 0.000000] init_memory_mapping: [mem 0x100000000-0x17fffffff] |
| [ 0.000000] [mem 0x100000000-0x17fffffff] page 1G |
| [ 0.000000] RAMDISK: [mem 0x7f775000-0x7fffefff] |
| [ 0.000000] ACPI: Early table checksum verification disabled |
| [ 0.000000] ACPI: RSDP 0x00000000000F16B0 000024 (v02 CORE ) |
| [ 0.000000] ACPI: XSDT 0x00000000DFFB40E0 000064 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: FACP 0x00000000DFFB68A0 000074 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: DSDT 0x00000000DFFB4250 002644 (v02 ASUS COREBOOT 00000001 INTL 20140114) |
| [ 0.000000] ACPI: FACS 0x00000000DFFB4210 000040 |
| [ 0.000000] ACPI: SSDT 0x00000000DFFB69A0 0010DF (v02 CORE COREBOOT 0000002A CORE 0000002A) |
| [ 0.000000] ACPI: APIC 0x00000000DFFB7A80 0000FE (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SRAT 0x00000000DFFB7B80 000190 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SLIT 0x00000000DFFB7D10 000030 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: HPET 0x00000000DFFB7D40 000038 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SRAT 0x00000000DFFB7D80 000190 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SLIT 0x00000000DFFB7F10 000030 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0 |
| [ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0 |
| [ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0 |
| [ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0 |
| [ 0.000000] SRAT: PXM 0 -> APIC 0x04 -> Node 0 |
| [ 0.000000] SRAT: PXM 0 -> APIC 0x05 -> Node 0 |
| [ 0.000000] SRAT: PXM 1 -> APIC 0x08 -> Node 1 |
| [ 0.000000] SRAT: PXM 1 -> APIC 0x09 -> Node 1 |
| [ 0.000000] SRAT: PXM 1 -> APIC 0x0a -> Node 1 |
| [ 0.000000] SRAT: PXM 1 -> APIC 0x0b -> Node 1 |
| [ 0.000000] SRAT: PXM 1 -> APIC 0x0c -> Node 1 |
| [ 0.000000] SRAT: PXM 1 -> APIC 0x0d -> Node 1 |
| [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff] |
| [ 0.000000] SRAT: Node 2 PXM 7 [mem 0x00100000-0xdfffffff] |
| [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xdfffffff] |
| [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x19fffffff] |
| [ 0.000000] NUMA: Initialized distance table, cnt=3 |
| [ 0.000000] NUMA: node 2 [mem 0x00100000-0xdfffffff] overlaps with node 0 [mem 0x00100000-0xdfffffff] |
| [ 0.000000] Scanning NUMA topology in Northbridge 24 |
| [ 0.000000] Number of physical nodes 2 |
| [ 0.000000] Node 0 MemBase 0000000000000000 Limit 00000001a0000000 |
| [ 0.000000] Skipping disabled node 1 |
| [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x19fffffff] |
| [ 0.000000] NODE_DATA [mem 0x19fff9000-0x19fffdfff] |
| [ 0.000000] [ffffea0000000000-ffffea0005bfffff] PMD -> [ffff880199600000-ffff88019ebfffff] on node 0 |
| [ 0.000000] Zone ranges: |
| [ 0.000000] DMA [mem 0x00001000-0x00ffffff] |
| [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] |
| [ 0.000000] Normal [mem 0x100000000-0x19fffffff] |
| [ 0.000000] Movable zone start for each node |
| [ 0.000000] Early memory node ranges |
| [ 0.000000] node 0: [mem 0x00001000-0x0009efff] |
| [ 0.000000] node 0: [mem 0x00100000-0xdffaafff] |
| [ 0.000000] node 0: [mem 0x100000000-0x19fffffff] |
| [ 0.000000] On node 0 totalpages: 1572681 |
| [ 0.000000] DMA zone: 56 pages used for memmap |
| [ 0.000000] DMA zone: 21 pages reserved |
| [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 |
| [ 0.000000] DMA32 zone: 12487 pages used for memmap |
| [ 0.000000] DMA32 zone: 913323 pages, LIFO batch:31 |
| [ 0.000000] Normal zone: 8960 pages used for memmap |
| [ 0.000000] Normal zone: 655360 pages, LIFO batch:31 |
| [ 0.000000] ACPI: PM-Timer IO Port: 0x2008 |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x08] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x09] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x0a] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x0b] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0c] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0d] enabled) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1]) |
| [ 0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0]) |
| [ 0.000000] IOAPIC[0]: apic_id 24, version 17, address 0xfec00000, GSI 0-23 |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) |
| [ 0.000000] ACPI: IRQ9 used by override. |
| [ 0.000000] ACPI: IRQ14 used by override. |
| [ 0.000000] ACPI: IRQ15 used by override. |
| [ 0.000000] Using ACPI (MADT) for SMP configuration information |
| [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 |
| [ 0.000000] smpboot: Allowing 12 CPUs, 0 hotplug CPUs |
| [ 0.000000] nr_irqs_gsi: 40 |
| [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xdffab000-0xefffffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xffffffff] |
| [ 0.000000] e820: [mem 0xf0000000-0xffffffff] available for PCI devices |
| [ 0.000000] Booting paravirtualized kernel on bare hardware |
| [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:12 nr_node_ids:1 |
| [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88019fc00000 s80896 r8192 d21504 u131072 |
| [ 0.000000] pcpu-alloc: s80896 r8192 d21504 u131072 alloc=1*2097152 |
| [ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 -- -- -- -- |
| [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1551157 |
| [ 0.000000] Policy zone: Normal |
| [ 0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=192.168.1.50:/mnt/udata/nfsroots/cb-test-tgt,v3,hard,nointr,tcp ip=192.168.20.36::192.168.20.1:255.255.255.0:embed-o-matic:eth0:off console=tty0 console=ttyS0,115200n8 rw BOOT_IMAGE=vmlinuz-cb-test-tgt |
| [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) |
| [ 0.000000] AGP: Checking aperture... |
| [ 0.000000] AGP: No AGP bridge found |
| [ 0.000000] AGP: Node 0: aperture [bus addr 0x7000000000-0x7001ffffff] (32MB) |
| [ 0.000000] Aperture beyond 4GB. Ignoring. |
| [ 0.000000] AGP: Your BIOS doesn't leave a aperture memory hole |
| [ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup |
| [ 0.000000] AGP: This costs you 64MB of RAM |
| [ 0.000000] AGP: Mapping aperture over RAM [mem 0xd4000000-0xd7ffffff] (65536KB) |
| [ 0.000000] PM: Registered nosave memory: [mem 0xd4000000-0xd7ffffff] |
| [ 0.000000] Memory: 6049436K/6290724K available (5203K kernel code, 943K rwdata, 1832K rodata, 1204K init, 840K bss, 241288K reserved) |
| [ 0.000000] Hierarchical RCU implementation. |
| [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. |
| [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=12. |
| [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=12 |
| [ 0.000000] NR_IRQS:33024 nr_irqs:776 16 |
| [ 0.000000] spurious 8259A interrupt: IRQ7. |
| [ 0.000000] Console: colour VGA+ 80x25 |
| [ 0.000000] console [tty0] enabled |
| [ 0.000000] console [ttyS0] enabled |
| [ 0.000000] hpet clockevent registered |
| [ 0.000000] tsc: Fast TSC calibration using PIT |
| [ 0.000000] tsc: Detected 2412.202 MHz processor |
| [ 0.000032] Calibrating delay loop (skipped), value calculated using timer frequency.. 4824.40 BogoMIPS (lpj=9648808) |
| [ 0.010826] pid_max: default: 32768 minimum: 301 |
| [ 0.015533] ACPI: Core revision 20140424 |
| [ 0.021228] ACPI: All ACPI Tables successfully acquired |
| [ 0.026685] Security Framework initialized |
| [ 0.030873] AppArmor: AppArmor disabled by boot time parameter |
| [ 0.036786] Yama: disabled by default; enable with sysctl kernel.yama.* |
| [ 0.044099] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) |
| [ 0.056738] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) |
| [ 0.066450] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) |
| [ 0.073436] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) |
| [ 0.081300] Initializing cgroup subsys memory |
| [ 0.085747] Initializing cgroup subsys devices |
| [ 0.090284] Initializing cgroup subsys freezer |
| [ 0.094810] Initializing cgroup subsys net_cls |
| [ 0.100397] Initializing cgroup subsys blkio |
| [ 0.104746] Initializing cgroup subsys perf_event |
| [ 0.109525] Initializing cgroup subsys net_prio |
| [ 0.114164] tseg: 0000000000 |
| [ 0.114175] CPU: Physical Processor ID: 0 |
| [ 0.118269] CPU: Processor Core ID: 0 |
| [ 0.122011] mce: CPU supports 6 MCE banks |
| [ 0.126105] LVT offset 0 assigned for vector 0xf9 |
| [ 0.130893] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8 |
| Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0 |
| tlb_flushall_shift: 6 |
| [ 0.146358] Freeing SMP alternatives memory: 20K (ffffffff81a1a000 - ffffffff81a1f000) |
| [ 0.155270] ftrace: allocating 21601 entries in 85 pages |
| [ 0.168632] Switched APIC routing to physical flat. |
| [ 0.173948] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0 |
| [ 0.219593] smpboot: CPU0: Six-Core AMD Opteron(tm) Processor 2431 (fam: 10, model: 08, stepping: 00) |
| [ 0.337095] Performance Events: AMD PMU driver. |
| [ 0.341763] ... version: 0 |
| [ 0.345844] ... bit width: 48 |
| [ 0.350010] ... generic registers: 4 |
| [ 0.354079] ... value mask: 0000ffffffffffff |
| [ 0.359464] ... max period: 00007fffffffffff |
| [ 0.364852] ... fixed-purpose events: 0 |
| [ 0.368936] ... event mask: 000000000000000f |
| [ 0.376399] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. |
| [ 0.384684] x86: Booting SMP configuration: |
| [ 0.388939] .... node #0, CPUs: #1 |
| [ 0.406727] do_IRQ: 1.55 No irq handler for vector (irq -1) |
| [ 0.419917] #2 |
| [ 0.419917] do_IRQ: 2.55 No irq handler for vector (irq -1) |
| [ 0.433098] #3 |
| [ 0.433098] do_IRQ: 3.55 No irq handler for vector (irq -1) |
| [ 0.446275] #4 |
| [ 0.446275] do_IRQ: 4.55 No irq handler for vector (irq -1) |
| [ 0.459452] #5 |
| [ 0.459453] do_IRQ: 5.55 No irq handler for vector (irq -1) |
| [ 0.569470] #6 |
| [ 0.569471] do_IRQ: 6.55 No irq handler for vector (irq -1) |
| [ 0.582642] #7 |
| [ 0.582642] do_IRQ: 7.55 No irq handler for vector (irq -1) |
| [ 0.595817] #8 |
| [ 0.595817] do_IRQ: 8.55 No irq handler for vector (irq -1) |
| [ 0.608998] #9 |
| [ 0.608998] do_IRQ: 9.55 No irq handler for vector (irq -1) |
| [ 0.622176] #10 |
| [ 0.622176] do_IRQ: 10.55 No irq handler for vector (irq -1) |
| [ 0.635349] #11 |
| [ 0.635349] x86: Booted up 1 node, 12 CPUs |
| [ 0.641447] smpboot: Total of 12 processors activated (57895.89 BogoMIPS) |
| [ 0.662623] devtmpfs: initialized |
| [ 0.672817] pinctrl core: initialized pinctrl subsystem |
| [ 0.678247] NET: Registered protocol family 16 |
| [ 0.682921] cpuidle: using governor ladder |
| [ 0.687092] cpuidle: using governor menu |
| [ 0.691094] node 0 link 1: io port [1000, 3fff] |
| [ 0.691097] TOM: 00000000e0000000 aka 3584M |
| [ 0.695343] Fam 10h mmconf [mem 0xe0000000-0xefffffff] |
| [ 0.695346] node 0 link 1: mmio [fc000000, fc3fffff] |
| [ 0.695349] node 0 link 1: mmio [f8000000, fbffffff] |
| [ 0.695350] TOM2: 00000001a0000000 aka 6656M |
| [ 0.699697] bus: [bus 00-05] on node 0 link 1 |
| [ 0.699699] bus: 00 [io 0x0000-0xffff] |
| [ 0.699700] bus: 00 [mem 0xf0000000-0xffffffff] |
| [ 0.699702] bus: 00 [mem 0x1a0000000-0xfcffffffff] |
| [ 0.699790] ACPI: bus type PCI registered |
| [ 0.703868] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 |
| [ 0.710528] PCI: Using configuration type 1 for base access |
| [ 0.716178] PCI: Using configuration type 1 for extended access |
| [ 0.722732] mtrr: your CPUs had inconsistent variable MTRR settings |
| [ 0.729085] mtrr: probably your BIOS does not setup all CPUs. |
| [ 0.734905] mtrr: corrected configuration. |
| [ 0.750479] ACPI: Added _OSI(Module Device) |
| [ 0.754758] ACPI: Added _OSI(Processor Device) |
| [ 0.759283] ACPI: Added _OSI(3.0 _SCP Extensions) |
| [ 0.764074] ACPI: Added _OSI(Processor Aggregator Device) |
| [ 0.772244] ACPI: Interpreter enabled |
| [ 0.775983] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580) |
| [ 0.785431] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580) |
| [ 0.794882] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580) |
| [ 0.804341] ACPI: (supports S0 S1 S5) |
| [ 0.808078] ACPI: Using IOAPIC for interrupt routing |
| [ 0.813151] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| [ 0.833503] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05]) |
| [ 0.839782] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] |
| [ 0.848098] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] |
| [ 0.871274] acpi PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x03b0-0x03df] ignored |
| [ 0.881357] PCI host bridge to bus 0000:00 |
| [ 0.885530] pci_bus 0000:00: root bus resource [bus 00-05] |
| [ 0.891104] pci_bus 0000:00: root bus resource [io 0x0d00-0x3fff] |
| [ 0.897367] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff] |
| [ 0.904331] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc3fffff] |
| [ 0.911283] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] |
| [ 0.917555] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000 |
| [ 0.917698] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100 |
| [ 0.917708] pci 0000:00:01.0: reg 0x10: [io 0x2c00-0x2c7f] |
| [ 0.917803] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500 |
| [ 0.917812] pci 0000:00:01.1: reg 0x10: [io 0x3000-0x301f] |
| [ 0.917828] pci 0000:00:01.1: reg 0x20: [io 0x2c80-0x2cbf] |
| [ 0.917832] pci 0000:00:01.1: reg 0x24: [io 0x2cc0-0x2cff] |
| [ 0.917849] pci 0000:00:01.1: PME# supported from D3hot D3cold |
| [ 0.917927] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310 |
| [ 0.917936] pci 0000:00:02.0: reg 0x10: [mem 0xfc300000-0xfc300fff] |
| [ 0.917960] pci 0000:00:02.0: supports D1 D2 |
| [ 0.917970] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.918010] pci 0000:00:02.0: System wakeup disabled by ACPI |
| [ 0.923792] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320 |
| [ 0.923801] pci 0000:00:02.1: reg 0x10: [mem 0xfc303000-0xfc3030ff] |
| [ 0.923839] pci 0000:00:02.1: supports D1 D2 |
| [ 0.923840] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.923881] pci 0000:00:02.1: System wakeup disabled by ACPI |
| [ 0.929680] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a |
| [ 0.929703] pci 0000:00:06.0: reg 0x20: [io 0x3020-0x302f] |
| [ 0.929713] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] |
| [ 0.936932] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io 0x03f6] |
| [ 0.943542] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] |
| [ 0.950764] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io 0x0376] |
| [ 0.957451] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185 |
| [ 0.957460] pci 0000:00:07.0: reg 0x10: [io 0x3050-0x3057] |
| [ 0.957464] pci 0000:00:07.0: reg 0x14: [io 0x3070-0x3073] |
| [ 0.957468] pci 0000:00:07.0: reg 0x18: [io 0x3058-0x305f] |
| [ 0.957472] pci 0000:00:07.0: reg 0x1c: [io 0x3074-0x3077] |
| [ 0.957476] pci 0000:00:07.0: reg 0x20: [io 0x3030-0x303f] |
| [ 0.957480] pci 0000:00:07.0: reg 0x24: [mem 0xfc301000-0xfc301fff] |
| [ 0.957565] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185 |
| [ 0.957577] pci 0000:00:08.0: reg 0x10: [io 0x3060-0x3067] |
| [ 0.957581] pci 0000:00:08.0: reg 0x14: [io 0x3078-0x307b] |
| [ 0.957585] pci 0000:00:08.0: reg 0x18: [io 0x3068-0x306f] |
| [ 0.957589] pci 0000:00:08.0: reg 0x1c: [io 0x307c-0x307f] |
| [ 0.957593] pci 0000:00:08.0: reg 0x20: [io 0x3040-0x304f] |
| [ 0.957597] pci 0000:00:08.0: reg 0x24: [mem 0xfc302000-0xfc302fff] |
| [ 0.957679] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400 |
| [ 0.957737] pci 0000:00:09.0: System wakeup disabled by ACPI |
| [ 0.963529] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400 |
| [ 0.963569] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.963610] pci 0000:00:0b.0: System wakeup disabled by ACPI |
| [ 0.969404] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400 |
| [ 0.969441] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.969482] pci 0000:00:0c.0: System wakeup disabled by ACPI |
| [ 0.975278] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400 |
| [ 0.975313] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.975356] pci 0000:00:0d.0: System wakeup disabled by ACPI |
| [ 0.981139] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400 |
| [ 0.981165] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.981217] pci 0000:00:0e.0: System wakeup disabled by ACPI |
| [ 0.987013] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000 |
| [ 0.987099] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000 |
| [ 0.987176] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000 |
| [ 0.987255] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000 |
| [ 0.987339] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000 |
| [ 0.987416] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000 |
| [ 0.987516] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000 |
| [ 0.987598] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000 |
| [ 0.987682] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000 |
| [ 0.987766] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000 |
| [ 0.987882] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000 |
| [ 0.987892] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref] |
| [ 0.987900] pci 0000:01:04.0: reg 0x14: [mem 0xfc000000-0xfc03ffff] |
| [ 0.987909] pci 0000:01:04.0: reg 0x18: [io 0x1000-0x107f] |
| [ 0.987942] pci 0000:01:04.0: supports D1 D2 |
| [ 0.988014] pci 0000:00:09.0: PCI bridge to [bus 01] |
| [ 0.993060] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff] |
| [ 0.993063] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff] |
| [ 0.993065] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref] |
| [ 0.993125] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000 |
| [ 0.993157] pci 0000:02:00.0: reg 0x10: [mem 0xfc100000-0xfc10ffff 64bit] |
| [ 0.993190] pci 0000:02:00.0: reg 0x30: [mem 0x61c00000-0x61c0ffff pref] |
| [ 0.993254] pci 0000:02:00.0: PME# supported from D3hot D3cold |
| [ 0.993321] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' |
| [ 1.003443] pci 0000:00:0b.0: PCI bridge to [bus 02] |
| [ 1.008490] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff] |
| [ 1.008560] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000 |
| [ 1.008575] pci 0000:03:00.0: reg 0x10: [mem 0xfc200000-0xfc20ffff 64bit] |
| [ 1.008671] pci 0000:03:00.0: PME# supported from D3hot D3cold |
| [ 1.008729] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' |
| [ 1.018852] pci 0000:00:0c.0: PCI bridge to [bus 03] |
| [ 1.023901] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff] |
| [ 1.023945] pci 0000:00:0d.0: PCI bridge to [bus 04] |
| [ 1.029038] pci 0000:00:0e.0: PCI bridge to [bus 05] |
| [ 1.034101] pci_bus 0000:00: on NUMA node 0 |
| [ 1.034170] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19) |
| [ 1.040577] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19) |
| [ 1.046980] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled. |
| [ 1.054614] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled. |
| [ 1.062252] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled. |
| [ 1.069886] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.077501] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23) |
| [ 1.083876] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23) |
| [ 1.090289] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.097921] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.105555] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.113194] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23) |
| [ 1.119594] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23) |
| [ 1.125999] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.133654] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.141285] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.148910] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. |
| [ 1.158017] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled. |
| [ 1.164710] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled. |
| [ 1.171409] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled. |
| [ 1.178109] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled. |
| [ 1.184994] ACPI: Enabled 1 GPEs in block 00 to 1F |
| [ 1.190168] vgaarb: setting as boot device: PCI:0000:01:04.0 |
| [ 1.195938] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none |
| [ 1.204144] vgaarb: loaded |
| [ 1.206933] vgaarb: bridge control possible 0000:01:04.0 |
| [ 1.212444] PCI: Using ACPI for IRQ routing |
| [ 1.216711] PCI: pci_cache_line_size set to 64 bytes |
| [ 1.216757] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] |
| [ 1.216760] e820: reserve RAM buffer [mem 0xdffab000-0xdfffffff] |
| [ 1.216979] HPET: 3 timers in total, 0 timers will be used for per-cpu timer |
| [ 1.224120] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 |
| [ 1.229407] hpet0: 3 comparators, 32-bit 25.000000 MHz counter |
| [ 1.238424] Switched to clocksource hpet |
| [ 1.250352] pnp: PnP ACPI init |
| [ 1.253523] ACPI: bus type PNP registered |
| [ 1.257997] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) |
| [ 1.258047] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active) |
| [ 1.258105] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active) |
| [ 1.258157] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active) |
| [ 1.258185] pnp 00:04: [dma 2] |
| [ 1.258210] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active) |
| [ 1.258226] pnp: PnP ACPI: found 5 devices |
| [ 1.262404] ACPI: bus type PNP unregistered |
| [ 1.273727] pci 0000:02:00.0: can't claim BAR 6 [mem 0x61c00000-0x61c0ffff pref]: no compatible bridge window |
| [ 1.283797] pci 0000:00:09.0: PCI bridge to [bus 01] |
| [ 1.288847] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff] |
| [ 1.295021] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff] |
| [ 1.301895] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref] |
| [ 1.309230] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc110000-0xfc11ffff pref] |
| [ 1.316561] pci 0000:00:0b.0: PCI bridge to [bus 02] |
| [ 1.321603] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff] |
| [ 1.328476] pci 0000:00:0c.0: PCI bridge to [bus 03] |
| [ 1.333518] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff] |
| [ 1.340388] pci 0000:00:0d.0: PCI bridge to [bus 04] |
| [ 1.345435] pci 0000:00:0e.0: PCI bridge to [bus 05] |
| [ 1.350486] pci_bus 0000:00: resource 4 [io 0x0d00-0x3fff] |
| [ 1.350488] pci_bus 0000:00: resource 5 [mem 0xf8000000-0xfbffffff] |
| [ 1.350490] pci_bus 0000:00: resource 6 [mem 0xfc000000-0xfc3fffff] |
| [ 1.350492] pci_bus 0000:00: resource 7 [io 0x0000-0x0cf7] |
| [ 1.350494] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] |
| [ 1.350496] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff] |
| [ 1.350498] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref] |
| [ 1.350500] pci_bus 0000:02: resource 1 [mem 0xfc100000-0xfc1fffff] |
| [ 1.350503] pci_bus 0000:03: resource 1 [mem 0xfc200000-0xfc2fffff] |
| [ 1.350652] NET: Registered protocol family 2 |
| [ 1.355587] TCP established hash table entries: 65536 (order: 7, 524288 bytes) |
| [ 1.363280] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) |
| [ 1.370673] TCP: Hash tables configured (established 65536 bind 65536) |
| [ 1.377361] TCP: reno registered |
| [ 1.380676] UDP hash table entries: 4096 (order: 5, 131072 bytes) |
| [ 1.386961] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) |
| [ 1.393798] NET: Registered protocol family 1 |
| [ 1.398495] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23 |
| [ 1.404582] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22 |
| [ 1.410520] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.416127] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.421704] pci 0000:00:0b.0: Found disabled HT MSI Mapping |
| [ 1.427361] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.434088] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.439663] pci 0000:00:0c.0: Found disabled HT MSI Mapping |
| [ 1.445322] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.450938] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.456505] pci 0000:00:0d.0: Found disabled HT MSI Mapping |
| [ 1.462162] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.467786] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.473355] pci 0000:00:0e.0: Found disabled HT MSI Mapping |
| [ 1.479016] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.484605] pci 0000:01:04.0: Video device with shadowed ROM |
| [ 1.484612] PCI: CLS 64 bytes, default 64 |
| [ 1.484693] Unpacking initramfs... |
| [ 1.675623] Freeing initrd memory: 8744K (ffff88007f775000 - ffff88007ffff000) |
| [ 1.683316] PCI-DMA: Disabling AGP. |
| [ 1.687064] PCI-DMA: aperture base @ d4000000 size 65536 KB |
| [ 1.692724] PCI-DMA: using GART IOMMU. |
| [ 1.696570] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture |
| [ 1.709417] platform rtc_cmos: registered platform RTC device (no PNP device found) |
| [ 1.717783] microcode: CPU0: patch_level=0x00000000 |
| [ 1.722759] microcode: CPU1: patch_level=0x00000000 |
| [ 1.727733] microcode: CPU2: patch_level=0x00000000 |
| [ 1.732708] microcode: CPU3: patch_level=0x00000000 |
| [ 1.737690] microcode: CPU4: patch_level=0x00000000 |
| [ 1.742671] microcode: CPU5: patch_level=0x00000000 |
| [ 1.747649] microcode: CPU6: patch_level=0x00000000 |
| [ 1.752637] microcode: CPU7: patch_level=0x00000000 |
| [ 1.757630] microcode: CPU8: patch_level=0x00000000 |
| [ 1.762614] microcode: CPU9: patch_level=0x00000000 |
| [ 1.767612] microcode: CPU10: patch_level=0x00000000 |
| [ 1.772689] microcode: CPU11: patch_level=0x00000000 |
| [ 1.777825] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba |
| [ 1.786753] LVT offset 1 assigned for vector 0x400 |
| [ 1.791632] IBS: LVT offset 1 assigned |
| [ 1.795493] perf: AMD IBS detected (0x0000001f) |
| [ 1.800616] futex hash table entries: 4096 (order: 6, 262144 bytes) |
| [ 1.807090] audit: initializing netlink subsys (disabled) |
| [ 1.812599] audit: type=2000 audit(1426462443.612:1): initialized |
| [ 1.819180] HugeTLB registered 2 MB page size, pre-allocated 0 pages |
| [ 1.825648] zbud: loaded |
| [ 1.828589] VFS: Disk quotas dquot_6.5.2 |
| [ 1.832624] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) |
| [ 1.839230] msgmni has been set to 11961 |
| [ 1.843657] alg: No test for stdrng (krng) |
| [ 1.847907] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) |
| [ 1.855525] io scheduler noop registered |
| [ 1.859526] io scheduler deadline registered |
| [ 1.863938] io scheduler cfq registered (default) |
| [ 1.868889] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X |
| [ 1.868991] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X |
| [ 1.869084] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X |
| [ 1.869175] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X |
| [ 1.869299] aer 0000:00:0b.0:pcie02: service driver aer loaded |
| [ 1.869320] aer 0000:00:0c.0:pcie02: service driver aer loaded |
| [ 1.869342] aer 0000:00:0d.0:pcie02: service driver aer loaded |
| [ 1.869364] aer 0000:00:0e.0:pcie02: service driver aer loaded |
| [ 1.869380] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt |
| [ 1.876434] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt |
| [ 1.883046] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded |
| [ 1.883054] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt |
| [ 1.890102] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt |
| [ 1.896721] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded |
| [ 1.896729] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt |
| [ 1.903778] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded |
| [ 1.903785] pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt |
| [ 1.910842] pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded |
| [ 1.910861] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 |
| [ 1.916532] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 |
| [ 1.923331] GHES: HEST is not enabled! |
| [ 1.927241] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
| [ 1.953934] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A |
| [ 1.981778] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A |
| [ 1.989619] Linux agpgart interface v0.103 |
| [ 1.993963] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12 |
| [ 2.004313] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| [ 2.009385] serio: i8042 AUX port at 0x60,0x64 irq 12 |
| [ 2.014664] mousedev: PS/2 mouse device common for all mice |
| [ 2.020433] rtc_cmos rtc_cmos: RTC can wake from S4 |
| [ 2.025573] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 |
| [ 2.032051] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs |
| [ 2.040014] ledtrig-cpu: registered to indicate activity on CPUs |
| [ 2.046202] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com> |
| [ 2.052737] AMD IOMMUv2 functionality not available on this system |
| [ 2.059111] TCP: cubic registered |
| [ 2.062633] NET: Registered protocol family 10 |
| [ 2.067526] mip6: Mobile IPv6 |
| [ 2.070568] NET: Registered protocol family 17 |
| [ 2.075100] mpls_gso: MPLS GSO support |
| [ 2.079668] registered taskstats version 1 |
| [ 2.084333] rtc_cmos rtc_cmos: setting system clock to 2015-03-15 23:34:05 UTC (1426462445) |
| [ 2.092903] PM: Hibernation image not present or could not be loaded. |
| [ 2.094157] Freeing unused kernel memory: 1204K (ffffffff818ed000 - ffffffff81a1a000) |
| [ 2.102107] Write protecting the kernel read-only data: 8192k |
| [ 2.110477] Freeing unused kernel memory: 928K (ffff880001518000 - ffff880001600000) |
| [ 2.118918] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000) |
| [ 2.134807] systemd-udevd[120]: starting version 215 |
| [ 2.140245] random: systemd-udevd urandom read with 3 bits of entropy available |
| [ 2.158839] pps_core: LinuxPPS API ver. 1 registered |
| [ 2.163923] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> |
| [ 2.173354] ACPI: bus type USB registered |
| [ 2.177507] usbcore: registered new interface driver usbfs |
| [ 2.183109] usbcore: registered new interface driver hub |
| [ 2.183157] PTP clock support registered |
| [ 2.192608] usbcore: registered new device driver usb |
| [ 2.197986] tg3.c:v3.137 (May 11, 2014) |
| [ 2.201977] tg3 0000:02:00.0: enabling device (0004 -> 0006) |
| [ 2.207793] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| [ 2.207915] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17 |
| [ 2.220556] ehci-pci: EHCI PCI platform driver |
| [ 2.225203] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver |
| [ 2.225296] ehci-pci 0000:00:02.1: EHCI Host Controller |
| [ 2.225303] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1 |
| [ 2.225313] ehci-pci 0000:00:02.1: debug port 1 |
| [ 2.225348] ehci-pci 0000:00:02.1: cache line size of 64 is not supported |
| [ 2.225369] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc303000 |
| [ 2.235647] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00 |
| [ 2.235692] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 |
| [ 2.235694] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.235695] usb usb1: Product: EHCI Host Controller |
| [ 2.235696] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd |
| [ 2.235697] usb usb1: SerialNumber: 0000:00:02.1 |
| [ 2.235898] hub 1-0:1.0: USB hub found |
| [ 2.235906] hub 1-0:1.0: 10 ports detected |
| [ 2.298787] ohci-pci: OHCI PCI platform driver |
| [ 2.303481] ohci-pci 0000:00:02.0: OHCI PCI host controller |
| [ 2.309145] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2 |
| [ 2.316674] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc300000 |
| [ 2.353774] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:61:a2 |
| [ 2.364161] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) |
| [ 2.374015] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] |
| [ 2.377866] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 |
| [ 2.377868] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.377869] usb usb2: Product: OHCI PCI host controller |
| [ 2.377870] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd |
| [ 2.377871] usb usb2: SerialNumber: 0000:00:02.0 |
| [ 2.378006] hub 2-0:1.0: USB hub found |
| [ 2.378014] hub 2-0:1.0: 10 ports detected |
| [ 2.420275] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit] |
| [ 2.427158] tg3 0000:03:00.0: enabling device (0004 -> 0006) |
| [ 2.433006] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16 |
| [ 2.483231] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:63:95 |
| [ 2.493617] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) |
| [ 2.503473] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] |
| [ 2.511408] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit] |
| [ 2.522354] FS-Cache: Loaded |
| [ 2.528475] RPC: Registered named UNIX socket transport module. |
| [ 2.534704] RPC: Registered udp transport module. |
| [ 2.540835] RPC: Registered tcp transport module. |
| [ 2.546965] RPC: Registered tcp NFSv4.1 backchannel transport module. |
| [ 2.557950] FS-Cache: Netfs 'nfs' registered for caching |
| [ 2.572582] tg3 0000:02:00.0: irq 44 for MSI/MSI-X |
| [ 2.620174] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready |
| [ 2.708226] tsc: Refined TSC clocksource calibration: 2412.362 MHz |
| [ 3.713541] Switched to clocksource tsc |
| [ 4.213218] tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex |
| [ 4.219847] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX |
| [ 4.226831] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready |
| [ 5.087958] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR) |
| [ 5.101760] systemd[1]: Detected architecture 'x86-64'. |
| [ 5.310789] systemd[1]: Inserted module 'autofs4' |
| [ 5.317050] systemd[1]: Set hostname to <cb-test-tgt>. |
| [ 5.349886] random: nonblocking pool is initialized |
| [ 5.620789] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory. |
| [ 5.633649] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. |
| [ 5.648872] systemd[1]: Expecting device dev-ttyS0.device... |
| [ 5.663888] systemd[1]: Starting Forward Password Requests to Wall Directory Watch. |
| [ 5.671768] systemd[1]: Started Forward Password Requests to Wall Directory Watch. |
| [ 5.679460] systemd[1]: Starting Remote File Systems (Pre). |
| [ 5.695913] systemd[1]: Reached target Remote File Systems (Pre). |
| [ 5.702123] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point. |
| [ 5.723944] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. |
| [ 5.733467] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch. |
| [ 5.741611] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. |
| [ 5.749648] systemd[1]: Starting Paths. |
| [ 5.763990] systemd[1]: Reached target Paths. |
| [ 5.768442] systemd[1]: Starting Encrypted Volumes. |
| [ 5.784009] systemd[1]: Reached target Encrypted Volumes. |
| [ 5.789498] systemd[1]: Starting Swap. |
| [ 5.804046] systemd[1]: Reached target Swap. |
| [ 5.808435] systemd[1]: Starting Root Slice. |
| [ 5.828072] systemd[1]: Created slice Root Slice. |
| [ 5.832880] systemd[1]: Starting User and Session Slice. |
| [ 5.848086] systemd[1]: Created slice User and Session Slice. |
| [ 5.853941] systemd[1]: Starting Delayed Shutdown Socket. |
| [ 5.868120] systemd[1]: Listening on Delayed Shutdown Socket. |
| [ 5.873971] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. |
| [ 5.892146] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. |
| [ 5.899226] systemd[1]: Starting Journal Socket (/dev/log). |
| [ 5.916180] systemd[1]: Listening on Journal Socket (/dev/log). |
| [ 5.922193] systemd[1]: Starting Syslog Socket. |
| [ 5.936209] systemd[1]: Listening on Syslog Socket. |
| [ 5.941214] systemd[1]: Starting udev Kernel Socket. |
| [ 5.956229] systemd[1]: Listening on udev Kernel Socket. |
| [ 5.961665] systemd[1]: Starting udev Control Socket. |
| [ 5.976250] systemd[1]: Listening on udev Control Socket. |
| [ 5.981744] systemd[1]: Starting Journal Socket. |
| [ 5.996274] systemd[1]: Listening on Journal Socket. |
| [ 6.001361] systemd[1]: Starting Sockets. |
| [ 6.016297] systemd[1]: Reached target Sockets. |
| [ 6.020925] systemd[1]: Starting System Slice. |
| [ 6.036325] systemd[1]: Created slice System Slice. |
| [ 6.041317] systemd[1]: Starting system-getty.slice. |
| [ 6.056353] systemd[1]: Created slice system-getty.slice. |
| [ 6.061843] systemd[1]: Starting system-serial\x2dgetty.slice. |
| [ 6.076391] systemd[1]: Created slice system-serial\x2dgetty.slice. |
| [ 6.083377] systemd[1]: Starting Create list of required static device nodes for the current kernel... |
| [ 6.104864] systemd[1]: Mounting Debug File System... |
| [ 6.141356] systemd[1]: Started Set Up Additional Binary Formats. |
| [ 6.147604] systemd[1]: Mounting Huge Pages File System... |
| [ 6.201713] systemd[1]: Starting Load Kernel Modules... |
| [ 6.217080] systemd[1]: Mounting POSIX Message Queue File System... |
| [ 6.232998] systemd[1]: Starting udev Coldplug all Devices... |
| [ 6.249055] systemd[1]: Starting Journal Service... |
| [ 6.272620] systemd[1]: Started Journal Service. |
| [ 6.912650] systemd-udevd[207]: starting version 215 |
| [ 7.196398] systemd-journald[188]: Received request to flush runtime journal from PID 1 |
| [ 7.647901] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled |
| [ 7.655798] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled |
| [ 7.663840] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 |
| [ 7.672315] ACPI: Power Button [PWRB] |
| [ 7.676110] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 |
| [ 7.683622] ACPI: Power Button [PWRF] |
| [ 7.863272] input: PC Speaker as /devices/platform/pcspkr/input/input4 |
| [ 7.873730] EDAC MC: Ver: 3.0.0 |
| [ 7.903030] MCE: In-kernel MCE decoding enabled. |
| [ 7.914491] FDC 0 is a post-1991 82077 |
| [ 7.938435] SCSI subsystem initialized |
| [ 7.942579] acpi-cpufreq: overriding BIOS provided _PSD data |
| [ 7.960981] AMD64 EDAC driver v3.4.0 |
| [ 8.030863] w83793 0-002f: Registered watchdog chardev major 10, minor: 130 |
| [ 8.037974] i2c i2c-0: nForce2 SMBus adapter at 0x2c80 |
| [ 8.050788] libata version 3.00 loaded. |
| [ 8.084805] kvm: Nested Virtualization enabled |
| [ 8.089386] kvm: Nested Paging enabled |
| [ 9.929651] *****RAPTOR ENGINEERING KFSN4-DRE AUTOMATED TEST BOOT SUCCESS***** |
| [ 11.282726] i2c i2c-1: nForce2 SMBus adapter at 0x2cc0 |
| [ 11.288132] EDAC amd64: DRAM ECC enabled. |
| [ 11.288159] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 |
| [ 11.299085] EDAC amd64: F10h detected (node 0). |
| [ 11.303733] EDAC MC: DCT0 chip selects: |
| [ 11.303736] EDAC amd64: MC: 0: 1024MB 1: 1024MB |
| [ 11.308520] EDAC amd64: MC: 2: 1024MB 3: 1024MB |
| [ 11.313311] EDAC amd64: MC: 4: 1024MB 5: 1024MB |
| [ 11.318087] EDAC amd64: MC: 6: 0MB 7: 0MB |
| [ 11.322872] EDAC MC: DCT1 chip selects: |
| [ 11.322878] EDAC amd64: MC: 0: 0MB 1: 0MB |
| [ 11.327672] EDAC amd64: MC: 2: 0MB 3: 0MB |
| [ 11.332453] EDAC amd64: MC: 4: 0MB 5: 0MB |
| [ 11.337253] EDAC amd64: MC: 6: 0MB 7: 0MB |
| [ 11.342049] EDAC amd64: using x4 syndromes. |
| [ 11.346326] EDAC amd64: MCT channel count: 1 |
| [ 11.350744] EDAC amd64: CS0: Registered DDR2 RAM |
| [ 11.355480] EDAC amd64: CS1: Registered DDR2 RAM |
| [ 11.360190] EDAC amd64: CS2: Registered DDR2 RAM |
| [ 11.364902] EDAC amd64: CS3: Registered DDR2 RAM |
| [ 11.369612] EDAC amd64: CS4: Registered DDR2 RAM |
| [ 11.374315] EDAC amd64: CS5: Registered DDR2 RAM |
| [ 11.379785] EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT) |
| [ 11.389683] EDAC amd64: DRAM ECC disabled. |
| [ 11.393905] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. |
| Either enable ECC checking or force module loading by setting 'ecc_enable_override'. |
| (Note that use of the override may cause unknown side effects.) |
| [ 11.418518] sata_nv 0000:00:07.0: version 3.5 |
| [ 11.418549] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED) |
| [ 11.418906] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21 |
| [ 11.419585] scsi0 : sata_nv |
| [ 11.438371] scsi1 : sata_nv |
| [ 11.441371] ata1: SATA max UDMA/133 cmd 0x3050 ctl 0x3070 bmdma 0x3030 irq 21 |
| [ 11.448620] ata2: SATA max UDMA/133 cmd 0x3058 ctl 0x3074 bmdma 0x3038 irq 21 |
| [ 11.456110] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20 |
| [ 11.462290] scsi2 : sata_nv |
| [ 11.465302] scsi3 : sata_nv |
| [ 11.468221] ata3: SATA max UDMA/133 cmd 0x3060 ctl 0x3078 bmdma 0x3040 irq 20 |
| [ 11.475455] ata4: SATA max UDMA/133 cmd 0x3068 ctl 0x307c bmdma 0x3048 irq 20 |
| [ 11.482760] pata_amd 0000:00:06.0: version 0.4.1 |
| [ 11.483590] scsi4 : pata_amd |
| [ 11.486757] scsi5 : pata_amd |
| [ 11.489824] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3020 irq 14 |
| [ 11.496903] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3028 irq 15 |
| [ 11.767317] ata1: SATA link down (SStatus 0 SControl 300) |
| [ 11.791338] ata3: SATA link down (SStatus 0 SControl 300) |
| [ 12.083697] ata2: SATA link down (SStatus 0 SControl 300) |
| [ 12.400087] ata4: SATA link down (SStatus 0 SControl 300) |