| [ 0.000000] Initializing cgroup subsys cpuset |
| [ 0.000000] Initializing cgroup subsys cpu |
| [ 0.000000] Initializing cgroup subsys cpuacct |
| [ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01) |
| [ 0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=192.168.1.50:/mnt/udata/nfsroots/cb-test-tgt,v3,hard,nointr,tcp ip=192.168.20.36::192.168.20.1:255.255.255.0:embed-o-matic:eth0:off console=tty0 console=ttyS0,115200n8 rw BOOT_IMAGE=vmlinuz-cb-test-tgt |
| [ 0.000000] e820: BIOS-provided physical RAM map: |
| [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dffaefff] usable |
| [ 0.000000] BIOS-e820: [mem 0x00000000dffaf000-0x00000000efffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000019fffffff] usable |
| [ 0.000000] NX (Execute Disable) protection: active |
| [ 0.000000] SMBIOS 2.7 present. |
| [ 0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS 4.0-8325-g5179419 03/17/2015 |
| [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable |
| [ 0.000000] AGP: No AGP bridge found |
| [ 0.000000] e820: last_pfn = 0x1a0000 max_arch_pfn = 0x400000000 |
| [ 0.000000] MTRR default type: uncachable |
| [ 0.000000] MTRR fixed ranges enabled: |
| [ 0.000000] 00000-9FFFF write-back |
| [ 0.000000] A0000-BFFFF uncachable |
| [ 0.000000] C0000-FFFFF write-back |
| [ 0.000000] MTRR variable ranges enabled: |
| [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back |
| [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back |
| [ 0.000000] 2 base 0000C0000000 mask FFFFE0000000 write-back |
| [ 0.000000] 3 base 0000F8000000 mask FFFFFC000000 write-combining |
| [ 0.000000] 4 disabled |
| [ 0.000000] 5 disabled |
| [ 0.000000] 6 disabled |
| [ 0.000000] 7 disabled |
| [ 0.000000] TOM2: 00000001a0000000 aka 6656M |
| [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 |
| [ 0.000000] e820: last_pfn = 0xdffaf max_arch_pfn = 0x400000000 |
| [ 0.000000] found SMP MP-table at [mem 0x000f1490-0x000f149f] mapped at [ffff8800000f1490] |
| [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 |
| [ 0.000000] Using GB pages for direct mapping |
| [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] |
| [ 0.000000] [mem 0x00000000-0x000fffff] page 4k |
| [ 0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE |
| [ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE |
| [ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE |
| [ 0.000000] init_memory_mapping: [mem 0x19fe00000-0x19fffffff] |
| [ 0.000000] [mem 0x19fe00000-0x19fffffff] page 2M |
| [ 0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE |
| [ 0.000000] init_memory_mapping: [mem 0x19c000000-0x19fdfffff] |
| [ 0.000000] [mem 0x19c000000-0x19fdfffff] page 2M |
| [ 0.000000] init_memory_mapping: [mem 0x180000000-0x19bffffff] |
| [ 0.000000] [mem 0x180000000-0x19bffffff] page 2M |
| [ 0.000000] init_memory_mapping: [mem 0x00100000-0xdffaefff] |
| [ 0.000000] [mem 0x00100000-0x001fffff] page 4k |
| [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M |
| [ 0.000000] [mem 0x40000000-0xbfffffff] page 1G |
| [ 0.000000] [mem 0xc0000000-0xdfdfffff] page 2M |
| [ 0.000000] [mem 0xdfe00000-0xdffaefff] page 4k |
| [ 0.000000] init_memory_mapping: [mem 0x100000000-0x17fffffff] |
| [ 0.000000] [mem 0x100000000-0x17fffffff] page 1G |
| [ 0.000000] RAMDISK: [mem 0x7f775000-0x7fffefff] |
| [ 0.000000] ACPI: Early table checksum verification disabled |
| [ 0.000000] ACPI: RSDP 0x00000000000F16B0 000024 (v02 CORE ) |
| [ 0.000000] ACPI: XSDT 0x00000000DFFB80E0 000064 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: FACP 0x00000000DFFBA8A0 000074 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: DSDT 0x00000000DFFB8250 002644 (v02 ASUS COREBOOT 00000001 INTL 20140114) |
| [ 0.000000] ACPI: FACS 0x00000000DFFB8210 000040 |
| [ 0.000000] ACPI: SSDT 0x00000000DFFBA9A0 0010DF (v02 CORE COREBOOT 0000002A CORE 0000002A) |
| [ 0.000000] ACPI: APIC 0x00000000DFFBBA80 0000FE (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SRAT 0x00000000DFFBBB80 000190 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SLIT 0x00000000DFFBBD10 000030 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: HPET 0x00000000DFFBBD40 000038 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SRAT 0x00000000DFFBBD80 000190 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SLIT 0x00000000DFFBBF10 000030 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0 |
| [ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0 |
| [ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0 |
| [ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0 |
| [ 0.000000] SRAT: PXM 0 -> APIC 0x04 -> Node 0 |
| [ 0.000000] SRAT: PXM 0 -> APIC 0x05 -> Node 0 |
| [ 0.000000] SRAT: PXM 1 -> APIC 0x08 -> Node 1 |
| [ 0.000000] SRAT: PXM 1 -> APIC 0x09 -> Node 1 |
| [ 0.000000] SRAT: PXM 1 -> APIC 0x0a -> Node 1 |
| [ 0.000000] SRAT: PXM 1 -> APIC 0x0b -> Node 1 |
| [ 0.000000] SRAT: PXM 1 -> APIC 0x0c -> Node 1 |
| [ 0.000000] SRAT: PXM 1 -> APIC 0x0d -> Node 1 |
| [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff] |
| [ 0.000000] SRAT: Node 2 PXM 7 [mem 0x00100000-0xdfffffff] |
| [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xdfffffff] |
| [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x19fffffff] |
| [ 0.000000] NUMA: Initialized distance table, cnt=3 |
| [ 0.000000] NUMA: node 2 [mem 0x00100000-0xdfffffff] overlaps with node 0 [mem 0x00100000-0xdfffffff] |
| [ 0.000000] Scanning NUMA topology in Northbridge 24 |
| [ 0.000000] Number of physical nodes 2 |
| [ 0.000000] Node 0 MemBase 0000000000000000 Limit 00000001a0000000 |
| [ 0.000000] Skipping disabled node 1 |
| [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x19fffffff] |
| [ 0.000000] NODE_DATA [mem 0x19fff9000-0x19fffdfff] |
| [ 0.000000] [ffffea0000000000-ffffea0005bfffff] PMD -> [ffff880199600000-ffff88019ebfffff] on node 0 |
| [ 0.000000] Zone ranges: |
| [ 0.000000] DMA [mem 0x00001000-0x00ffffff] |
| [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] |
| [ 0.000000] Normal [mem 0x100000000-0x19fffffff] |
| [ 0.000000] Movable zone start for each node |
| [ 0.000000] Early memory node ranges |
| [ 0.000000] node 0: [mem 0x00001000-0x0009efff] |
| [ 0.000000] node 0: [mem 0x00100000-0xdffaefff] |
| [ 0.000000] node 0: [mem 0x100000000-0x19fffffff] |
| [ 0.000000] On node 0 totalpages: 1572685 |
| [ 0.000000] DMA zone: 56 pages used for memmap |
| [ 0.000000] DMA zone: 21 pages reserved |
| [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 |
| [ 0.000000] DMA32 zone: 12487 pages used for memmap |
| [ 0.000000] DMA32 zone: 913327 pages, LIFO batch:31 |
| [ 0.000000] Normal zone: 8960 pages used for memmap |
| [ 0.000000] Normal zone: 655360 pages, LIFO batch:31 |
| [ 0.000000] ACPI: PM-Timer IO Port: 0x2008 |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x08] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x09] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x0a] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x0b] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0c] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0d] enabled) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1]) |
| [ 0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0]) |
| [ 0.000000] IOAPIC[0]: apic_id 24, version 17, address 0xfec00000, GSI 0-23 |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) |
| [ 0.000000] ACPI: IRQ9 used by override. |
| [ 0.000000] ACPI: IRQ14 used by override. |
| [ 0.000000] ACPI: IRQ15 used by override. |
| [ 0.000000] Using ACPI (MADT) for SMP configuration information |
| [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 |
| [ 0.000000] smpboot: Allowing 12 CPUs, 0 hotplug CPUs |
| [ 0.000000] nr_irqs_gsi: 40 |
| [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xdffaf000-0xefffffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xffffffff] |
| [ 0.000000] e820: [mem 0xf0000000-0xffffffff] available for PCI devices |
| [ 0.000000] Booting paravirtualized kernel on bare hardware |
| [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:12 nr_node_ids:1 |
| [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88019fc00000 s80896 r8192 d21504 u131072 |
| [ 0.000000] pcpu-alloc: s80896 r8192 d21504 u131072 alloc=1*2097152 |
| [ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 -- -- -- -- |
| [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1551161 |
| [ 0.000000] Policy zone: Normal |
| [ 0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=192.168.1.50:/mnt/udata/nfsroots/cb-test-tgt,v3,hard,nointr,tcp ip=192.168.20.36::192.168.20.1:255.255.255.0:embed-o-matic:eth0:off console=tty0 console=ttyS0,115200n8 rw BOOT_IMAGE=vmlinuz-cb-test-tgt |
| [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) |
| [ 0.000000] AGP: Checking aperture... |
| [ 0.000000] AGP: No AGP bridge found |
| [ 0.000000] AGP: Node 0: aperture [bus addr 0x7000000000-0x7001ffffff] (32MB) |
| [ 0.000000] Aperture beyond 4GB. Ignoring. |
| [ 0.000000] AGP: Your BIOS doesn't leave a aperture memory hole |
| [ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup |
| [ 0.000000] AGP: This costs you 64MB of RAM |
| [ 0.000000] AGP: Mapping aperture over RAM [mem 0xd4000000-0xd7ffffff] (65536KB) |
| [ 0.000000] PM: Registered nosave memory: [mem 0xd4000000-0xd7ffffff] |
| [ 0.000000] Memory: 6049452K/6290740K available (5203K kernel code, 943K rwdata, 1832K rodata, 1204K init, 840K bss, 241288K reserved) |
| [ 0.000000] Hierarchical RCU implementation. |
| [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. |
| [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=12. |
| [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=12 |
| [ 0.000000] NR_IRQS:33024 nr_irqs:776 16 |
| [ 0.000000] spurious 8259A interrupt: IRQ7. |
| [ 0.000000] Console: colour VGA+ 80x25 |
| [ 0.000000] console [tty0] enabled |
| [ 0.000000] console [ttyS0] enabled |
| [ 0.000000] hpet clockevent registered |
| [ 0.000000] tsc: Fast TSC calibration using PIT |
| [ 0.000000] tsc: Detected 2412.300 MHz processor |
| [ 0.000031] Calibrating delay loop (skipped), value calculated using timer frequency.. 4824.60 BogoMIPS (lpj=9649200) |
| [ 0.010801] pid_max: default: 32768 minimum: 301 |
| [ 0.015497] ACPI: Core revision 20140424 |
| [ 0.021161] ACPI: All ACPI Tables successfully acquired |
| [ 0.026595] Security Framework initialized |
| [ 0.030772] AppArmor: AppArmor disabled by boot time parameter |
| [ 0.036676] Yama: disabled by default; enable with sysctl kernel.yama.* |
| [ 0.043976] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) |
| [ 0.056713] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) |
| [ 0.066463] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) |
| [ 0.073433] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) |
| [ 0.081280] Initializing cgroup subsys memory |
| [ 0.085732] Initializing cgroup subsys devices |
| [ 0.090256] Initializing cgroup subsys freezer |
| [ 0.094769] Initializing cgroup subsys net_cls |
| [ 0.100340] Initializing cgroup subsys blkio |
| [ 0.104682] Initializing cgroup subsys perf_event |
| [ 0.109450] Initializing cgroup subsys net_prio |
| [ 0.114076] tseg: 0000000000 |
| [ 0.114086] CPU: Physical Processor ID: 0 |
| [ 0.118165] CPU: Processor Core ID: 0 |
| [ 0.121897] mce: CPU supports 6 MCE banks |
| [ 0.125980] LVT offset 0 assigned for vector 0xf9 |
| [ 0.130759] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8 |
| Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0 |
| tlb_flushall_shift: 6 |
| [ 0.146182] Freeing SMP alternatives memory: 20K (ffffffff81a1a000 - ffffffff81a1f000) |
| [ 0.155056] ftrace: allocating 21601 entries in 85 pages |
| [ 0.168286] Switched APIC routing to physical flat. |
| [ 0.173595] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0 |
| [ 0.219137] smpboot: CPU0: Six-Core AMD Opteron(tm) Processor 2431 (fam: 10, model: 08, stepping: 00) |
| [ 0.336314] Performance Events: AMD PMU driver. |
| [ 0.340969] ... version: 0 |
| [ 0.345041] ... bit width: 48 |
| [ 0.349204] ... generic registers: 4 |
| [ 0.353272] ... value mask: 0000ffffffffffff |
| [ 0.358634] ... max period: 00007fffffffffff |
| [ 0.364011] ... fixed-purpose events: 0 |
| [ 0.368086] ... event mask: 000000000000000f |
| [ 0.375498] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. |
| [ 0.383756] x86: Booting SMP configuration: |
| [ 0.388006] .... node #0, CPUs: #1 |
| [ 0.405752] do_IRQ: 1.55 No irq handler for vector (irq -1) |
| [ 0.418910] #2 |
| [ 0.418911] do_IRQ: 2.55 No irq handler for vector (irq -1) |
| [ 0.432060] #3 |
| [ 0.432060] do_IRQ: 3.55 No irq handler for vector (irq -1) |
| [ 0.445203] #4 |
| [ 0.445203] do_IRQ: 4.55 No irq handler for vector (irq -1) |
| [ 0.458350] #5 |
| [ 0.458351] do_IRQ: 5.55 No irq handler for vector (irq -1) |
| [ 0.568114] #6 |
| [ 0.568114] do_IRQ: 6.55 No irq handler for vector (irq -1) |
| [ 0.581257] #7 |
| [ 0.581258] do_IRQ: 7.55 No irq handler for vector (irq -1) |
| [ 0.594402] #8 |
| [ 0.594403] do_IRQ: 8.55 No irq handler for vector (irq -1) |
| [ 0.607553] #9 |
| [ 0.607554] do_IRQ: 9.55 No irq handler for vector (irq -1) |
| [ 0.620701] #10 |
| [ 0.620701] do_IRQ: 10.55 No irq handler for vector (irq -1) |
| [ 0.633842] #11 |
| [ 0.633842] x86: Booted up 1 node, 12 CPUs |
| [ 0.639930] smpboot: Total of 12 processors activated (57896.99 BogoMIPS) |
| [ 0.661033] devtmpfs: initialized |
| [ 0.671198] pinctrl core: initialized pinctrl subsystem |
| [ 0.676637] NET: Registered protocol family 16 |
| [ 0.681301] cpuidle: using governor ladder |
| [ 0.685466] cpuidle: using governor menu |
| [ 0.689459] node 0 link 1: io port [1000, 3fff] |
| [ 0.689462] TOM: 00000000e0000000 aka 3584M |
| [ 0.693707] Fam 10h mmconf [mem 0xe0000000-0xefffffff] |
| [ 0.693710] node 0 link 1: mmio [fc000000, fc3fffff] |
| [ 0.693713] node 0 link 1: mmio [f8000000, fbffffff] |
| [ 0.693714] TOM2: 00000001a0000000 aka 6656M |
| [ 0.698053] bus: [bus 00-05] on node 0 link 1 |
| [ 0.698054] bus: 00 [io 0x0000-0xffff] |
| [ 0.698056] bus: 00 [mem 0xf0000000-0xffffffff] |
| [ 0.698057] bus: 00 [mem 0x1a0000000-0xfcffffffff] |
| [ 0.698145] ACPI: bus type PCI registered |
| [ 0.702213] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 |
| [ 0.708855] PCI: Using configuration type 1 for base access |
| [ 0.714494] PCI: Using configuration type 1 for extended access |
| [ 0.721032] mtrr: your CPUs had inconsistent variable MTRR settings |
| [ 0.727364] mtrr: probably your BIOS does not setup all CPUs. |
| [ 0.733176] mtrr: corrected configuration. |
| [ 0.748753] ACPI: Added _OSI(Module Device) |
| [ 0.753027] ACPI: Added _OSI(Processor Device) |
| [ 0.757541] ACPI: Added _OSI(3.0 _SCP Extensions) |
| [ 0.762319] ACPI: Added _OSI(Processor Aggregator Device) |
| [ 0.770450] ACPI: Interpreter enabled |
| [ 0.774187] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580) |
| [ 0.783616] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580) |
| [ 0.793047] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580) |
| [ 0.802482] ACPI: (supports S0 S1 S5) |
| [ 0.806217] ACPI: Using IOAPIC for interrupt routing |
| [ 0.811265] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| [ 0.831551] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05]) |
| [ 0.837803] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] |
| [ 0.846104] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] |
| [ 0.869144] acpi PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x03b0-0x03df] ignored |
| [ 0.879208] PCI host bridge to bus 0000:00 |
| [ 0.883361] pci_bus 0000:00: root bus resource [bus 00-05] |
| [ 0.888920] pci_bus 0000:00: root bus resource [io 0x0d00-0x3fff] |
| [ 0.895173] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff] |
| [ 0.902116] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc3fffff] |
| [ 0.909052] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] |
| [ 0.915310] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000 |
| [ 0.915453] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100 |
| [ 0.915459] pci 0000:00:01.0: reg 0x10: [io 0x2c00-0x2c7f] |
| [ 0.915557] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500 |
| [ 0.915566] pci 0000:00:01.1: reg 0x10: [io 0x3000-0x301f] |
| [ 0.915581] pci 0000:00:01.1: reg 0x20: [io 0x2c80-0x2cbf] |
| [ 0.915585] pci 0000:00:01.1: reg 0x24: [io 0x2cc0-0x2cff] |
| [ 0.915603] pci 0000:00:01.1: PME# supported from D3hot D3cold |
| [ 0.915684] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310 |
| [ 0.915693] pci 0000:00:02.0: reg 0x10: [mem 0xfc300000-0xfc300fff] |
| [ 0.915725] pci 0000:00:02.0: supports D1 D2 |
| [ 0.915731] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.915771] pci 0000:00:02.0: System wakeup disabled by ACPI |
| [ 0.921550] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320 |
| [ 0.921560] pci 0000:00:02.1: reg 0x10: [mem 0xfc303000-0xfc3030ff] |
| [ 0.921597] pci 0000:00:02.1: supports D1 D2 |
| [ 0.921599] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.921632] pci 0000:00:02.1: System wakeup disabled by ACPI |
| [ 0.927422] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a |
| [ 0.927445] pci 0000:00:06.0: reg 0x20: [io 0x3020-0x302f] |
| [ 0.927454] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] |
| [ 0.934659] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io 0x03f6] |
| [ 0.941254] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] |
| [ 0.948452] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io 0x0376] |
| [ 0.955129] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185 |
| [ 0.955138] pci 0000:00:07.0: reg 0x10: [io 0x3050-0x3057] |
| [ 0.955142] pci 0000:00:07.0: reg 0x14: [io 0x3070-0x3073] |
| [ 0.955146] pci 0000:00:07.0: reg 0x18: [io 0x3058-0x305f] |
| [ 0.955150] pci 0000:00:07.0: reg 0x1c: [io 0x3074-0x3077] |
| [ 0.955154] pci 0000:00:07.0: reg 0x20: [io 0x3030-0x303f] |
| [ 0.955158] pci 0000:00:07.0: reg 0x24: [mem 0xfc301000-0xfc301fff] |
| [ 0.955243] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185 |
| [ 0.955255] pci 0000:00:08.0: reg 0x10: [io 0x3060-0x3067] |
| [ 0.955260] pci 0000:00:08.0: reg 0x14: [io 0x3078-0x307b] |
| [ 0.955263] pci 0000:00:08.0: reg 0x18: [io 0x3068-0x306f] |
| [ 0.955267] pci 0000:00:08.0: reg 0x1c: [io 0x307c-0x307f] |
| [ 0.955271] pci 0000:00:08.0: reg 0x20: [io 0x3040-0x304f] |
| [ 0.955275] pci 0000:00:08.0: reg 0x24: [mem 0xfc302000-0xfc302fff] |
| [ 0.955357] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400 |
| [ 0.955419] pci 0000:00:09.0: System wakeup disabled by ACPI |
| [ 0.961200] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400 |
| [ 0.961240] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.961281] pci 0000:00:0b.0: System wakeup disabled by ACPI |
| [ 0.967060] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400 |
| [ 0.967097] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.967137] pci 0000:00:0c.0: System wakeup disabled by ACPI |
| [ 0.972914] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400 |
| [ 0.972949] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.972992] pci 0000:00:0d.0: System wakeup disabled by ACPI |
| [ 0.978771] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400 |
| [ 0.978797] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.978849] pci 0000:00:0e.0: System wakeup disabled by ACPI |
| [ 0.984626] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000 |
| [ 0.984712] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000 |
| [ 0.984789] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000 |
| [ 0.984865] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000 |
| [ 0.984948] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000 |
| [ 0.985025] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000 |
| [ 0.985120] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000 |
| [ 0.985199] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000 |
| [ 0.985281] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000 |
| [ 0.985368] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000 |
| [ 0.985488] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000 |
| [ 0.985501] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref] |
| [ 0.985509] pci 0000:01:04.0: reg 0x14: [mem 0xfc000000-0xfc03ffff] |
| [ 0.985518] pci 0000:01:04.0: reg 0x18: [io 0x1000-0x107f] |
| [ 0.985552] pci 0000:01:04.0: supports D1 D2 |
| [ 0.985615] pci 0000:00:09.0: PCI bridge to [bus 01] |
| [ 0.990655] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff] |
| [ 0.990658] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff] |
| [ 0.990660] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref] |
| [ 0.990720] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000 |
| [ 0.990740] pci 0000:02:00.0: reg 0x10: [mem 0xfc100000-0xfc10ffff 64bit] |
| [ 0.990773] pci 0000:02:00.0: reg 0x30: [mem 0x29400000-0x2940ffff pref] |
| [ 0.990846] pci 0000:02:00.0: PME# supported from D3hot D3cold |
| [ 0.990906] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' |
| [ 1.001005] pci 0000:00:0b.0: PCI bridge to [bus 02] |
| [ 1.006039] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff] |
| [ 1.006100] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000 |
| [ 1.006131] pci 0000:03:00.0: reg 0x10: [mem 0xfc200000-0xfc20ffff 64bit] |
| [ 1.006218] pci 0000:03:00.0: PME# supported from D3hot D3cold |
| [ 1.006280] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' |
| [ 1.016370] pci 0000:00:0c.0: PCI bridge to [bus 03] |
| [ 1.021401] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff] |
| [ 1.021446] pci 0000:00:0d.0: PCI bridge to [bus 04] |
| [ 1.026530] pci 0000:00:0e.0: PCI bridge to [bus 05] |
| [ 1.031583] pci_bus 0000:00: on NUMA node 0 |
| [ 1.031658] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19) |
| [ 1.038054] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19) |
| [ 1.044441] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled. |
| [ 1.052066] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled. |
| [ 1.059693] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled. |
| [ 1.067305] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.074912] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23) |
| [ 1.081280] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23) |
| [ 1.087684] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.095309] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.102918] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.110526] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23) |
| [ 1.116886] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23) |
| [ 1.123285] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.130912] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.138530] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.146131] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. |
| [ 1.155214] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled. |
| [ 1.161893] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled. |
| [ 1.168579] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled. |
| [ 1.175253] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled. |
| [ 1.182126] ACPI: Enabled 1 GPEs in block 00 to 1F |
| [ 1.187289] vgaarb: setting as boot device: PCI:0000:01:04.0 |
| [ 1.193045] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none |
| [ 1.201227] vgaarb: loaded |
| [ 1.204008] vgaarb: bridge control possible 0000:01:04.0 |
| [ 1.209504] PCI: Using ACPI for IRQ routing |
| [ 1.213762] PCI: pci_cache_line_size set to 64 bytes |
| [ 1.213808] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] |
| [ 1.213811] e820: reserve RAM buffer [mem 0xdffaf000-0xdfffffff] |
| [ 1.214029] HPET: 3 timers in total, 0 timers will be used for per-cpu timer |
| [ 1.221153] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 |
| [ 1.226430] hpet0: 3 comparators, 32-bit 25.000000 MHz counter |
| [ 1.235420] Switched to clocksource hpet |
| [ 1.247326] pnp: PnP ACPI init |
| [ 1.250487] ACPI: bus type PNP registered |
| [ 1.254949] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) |
| [ 1.255001] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active) |
| [ 1.255058] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active) |
| [ 1.255110] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active) |
| [ 1.255138] pnp 00:04: [dma 2] |
| [ 1.255164] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active) |
| [ 1.255180] pnp: PnP ACPI: found 5 devices |
| [ 1.259357] ACPI: bus type PNP unregistered |
| [ 1.270659] pci 0000:02:00.0: can't claim BAR 6 [mem 0x29400000-0x2940ffff pref]: no compatible bridge window |
| [ 1.280706] pci 0000:00:09.0: PCI bridge to [bus 01] |
| [ 1.285745] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff] |
| [ 1.291904] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff] |
| [ 1.298762] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref] |
| [ 1.306078] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc110000-0xfc11ffff pref] |
| [ 1.313395] pci 0000:00:0b.0: PCI bridge to [bus 02] |
| [ 1.318425] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff] |
| [ 1.325280] pci 0000:00:0c.0: PCI bridge to [bus 03] |
| [ 1.330312] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff] |
| [ 1.337167] pci 0000:00:0d.0: PCI bridge to [bus 04] |
| [ 1.342200] pci 0000:00:0e.0: PCI bridge to [bus 05] |
| [ 1.347238] pci_bus 0000:00: resource 4 [io 0x0d00-0x3fff] |
| [ 1.347241] pci_bus 0000:00: resource 5 [mem 0xf8000000-0xfbffffff] |
| [ 1.347243] pci_bus 0000:00: resource 6 [mem 0xfc000000-0xfc3fffff] |
| [ 1.347245] pci_bus 0000:00: resource 7 [io 0x0000-0x0cf7] |
| [ 1.347247] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] |
| [ 1.347249] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff] |
| [ 1.347251] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref] |
| [ 1.347253] pci_bus 0000:02: resource 1 [mem 0xfc100000-0xfc1fffff] |
| [ 1.347255] pci_bus 0000:03: resource 1 [mem 0xfc200000-0xfc2fffff] |
| [ 1.347399] NET: Registered protocol family 2 |
| [ 1.352328] TCP established hash table entries: 65536 (order: 7, 524288 bytes) |
| [ 1.359992] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) |
| [ 1.367321] TCP: Hash tables configured (established 65536 bind 65536) |
| [ 1.374001] TCP: reno registered |
| [ 1.377307] UDP hash table entries: 4096 (order: 5, 131072 bytes) |
| [ 1.383558] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) |
| [ 1.390365] NET: Registered protocol family 1 |
| [ 1.395044] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23 |
| [ 1.401107] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22 |
| [ 1.407029] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.412616] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.418177] pci 0000:00:0b.0: Found disabled HT MSI Mapping |
| [ 1.423823] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.430540] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.436094] pci 0000:00:0c.0: Found disabled HT MSI Mapping |
| [ 1.441739] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.447338] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.452900] pci 0000:00:0d.0: Found disabled HT MSI Mapping |
| [ 1.458535] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.464144] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.469699] pci 0000:00:0e.0: Found disabled HT MSI Mapping |
| [ 1.475345] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.480921] pci 0000:01:04.0: Video device with shadowed ROM |
| [ 1.480928] PCI: CLS 64 bytes, default 64 |
| [ 1.481005] Unpacking initramfs... |
| [ 1.670680] Freeing initrd memory: 8744K (ffff88007f775000 - ffff88007ffff000) |
| [ 1.678365] PCI-DMA: Disabling AGP. |
| [ 1.682117] PCI-DMA: aperture base @ d4000000 size 65536 KB |
| [ 1.687765] PCI-DMA: using GART IOMMU. |
| [ 1.691587] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture |
| [ 1.704387] platform rtc_cmos: registered platform RTC device (no PNP device found) |
| [ 1.712730] microcode: CPU0: patch_level=0x00000000 |
| [ 1.717701] microcode: CPU1: patch_level=0x00000000 |
| [ 1.722664] microcode: CPU2: patch_level=0x00000000 |
| [ 1.727629] microcode: CPU3: patch_level=0x00000000 |
| [ 1.732597] microcode: CPU4: patch_level=0x00000000 |
| [ 1.737565] microcode: CPU5: patch_level=0x00000000 |
| [ 1.742533] microcode: CPU6: patch_level=0x00000000 |
| [ 1.747510] microcode: CPU7: patch_level=0x00000000 |
| [ 1.752491] microcode: CPU8: patch_level=0x00000000 |
| [ 1.757464] microcode: CPU9: patch_level=0x00000000 |
| [ 1.762448] microcode: CPU10: patch_level=0x00000000 |
| [ 1.767515] microcode: CPU11: patch_level=0x00000000 |
| [ 1.772635] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba |
| [ 1.781541] LVT offset 1 assigned for vector 0x400 |
| [ 1.786407] IBS: LVT offset 1 assigned |
| [ 1.790260] perf: AMD IBS detected (0x0000001f) |
| [ 1.795373] futex hash table entries: 4096 (order: 6, 262144 bytes) |
| [ 1.801839] audit: initializing netlink subsys (disabled) |
| [ 1.807339] audit: type=2000 audit(1426576243.612:1): initialized |
| [ 1.813901] HugeTLB registered 2 MB page size, pre-allocated 0 pages |
| [ 1.820356] zbud: loaded |
| [ 1.823277] VFS: Disk quotas dquot_6.5.2 |
| [ 1.827310] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) |
| [ 1.833902] msgmni has been set to 11961 |
| [ 1.838328] alg: No test for stdrng (krng) |
| [ 1.842561] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) |
| [ 1.850163] io scheduler noop registered |
| [ 1.854162] io scheduler deadline registered |
| [ 1.858569] io scheduler cfq registered (default) |
| [ 1.863501] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X |
| [ 1.863604] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X |
| [ 1.863698] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X |
| [ 1.863792] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X |
| [ 1.863915] aer 0000:00:0b.0:pcie02: service driver aer loaded |
| [ 1.863937] aer 0000:00:0c.0:pcie02: service driver aer loaded |
| [ 1.863959] aer 0000:00:0d.0:pcie02: service driver aer loaded |
| [ 1.863981] aer 0000:00:0e.0:pcie02: service driver aer loaded |
| [ 1.863997] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt |
| [ 1.871033] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt |
| [ 1.877628] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded |
| [ 1.877636] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt |
| [ 1.884668] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt |
| [ 1.891264] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded |
| [ 1.891272] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt |
| [ 1.898303] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded |
| [ 1.898310] pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt |
| [ 1.905343] pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded |
| [ 1.905362] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 |
| [ 1.911035] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 |
| [ 1.917808] GHES: HEST is not enabled! |
| [ 1.921707] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
| [ 1.948341] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A |
| [ 1.976108] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A |
| [ 1.983921] Linux agpgart interface v0.103 |
| [ 1.988251] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12 |
| [ 1.998581] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| [ 2.003643] serio: i8042 AUX port at 0x60,0x64 irq 12 |
| [ 2.008904] mousedev: PS/2 mouse device common for all mice |
| [ 2.014656] rtc_cmos rtc_cmos: RTC can wake from S4 |
| [ 2.019788] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 |
| [ 2.026247] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs |
| [ 2.034191] ledtrig-cpu: registered to indicate activity on CPUs |
| [ 2.040366] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com> |
| [ 2.046879] AMD IOMMUv2 functionality not available on this system |
| [ 2.053233] TCP: cubic registered |
| [ 2.056764] NET: Registered protocol family 10 |
| [ 2.061633] mip6: Mobile IPv6 |
| [ 2.064673] NET: Registered protocol family 17 |
| [ 2.069188] mpls_gso: MPLS GSO support |
| [ 2.073740] registered taskstats version 1 |
| [ 2.078391] rtc_cmos rtc_cmos: setting system clock to 2015-03-17 07:10:45 UTC (1426576245) |
| [ 2.086938] PM: Hibernation image not present or could not be loaded. |
| [ 2.088193] Freeing unused kernel memory: 1204K (ffffffff818ed000 - ffffffff81a1a000) |
| [ 2.096122] Write protecting the kernel read-only data: 8192k |
| [ 2.104488] Freeing unused kernel memory: 928K (ffff880001518000 - ffff880001600000) |
| [ 2.112915] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000) |
| [ 2.128789] systemd-udevd[120]: starting version 215 |
| [ 2.134214] random: systemd-udevd urandom read with 3 bits of entropy available |
| [ 2.151913] pps_core: LinuxPPS API ver. 1 registered |
| [ 2.156989] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> |
| [ 2.166381] ACPI: bus type USB registered |
| [ 2.170504] usbcore: registered new interface driver usbfs |
| [ 2.176091] usbcore: registered new interface driver hub |
| [ 2.176168] PTP clock support registered |
| [ 2.185554] usbcore: registered new device driver usb |
| [ 2.190905] tg3.c:v3.137 (May 11, 2014) |
| [ 2.194843] tg3 0000:02:00.0: enabling device (0004 -> 0006) |
| [ 2.200681] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| [ 2.200763] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17 |
| [ 2.213372] ehci-pci: EHCI PCI platform driver |
| [ 2.218016] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver |
| [ 2.218083] ehci-pci 0000:00:02.1: EHCI Host Controller |
| [ 2.218090] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1 |
| [ 2.218102] ehci-pci 0000:00:02.1: debug port 1 |
| [ 2.218144] ehci-pci 0000:00:02.1: cache line size of 64 is not supported |
| [ 2.218162] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc303000 |
| [ 2.226314] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00 |
| [ 2.226348] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 |
| [ 2.226349] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.226350] usb usb1: Product: EHCI Host Controller |
| [ 2.226352] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd |
| [ 2.226353] usb usb1: SerialNumber: 0000:00:02.1 |
| [ 2.226589] hub 1-0:1.0: USB hub found |
| [ 2.226597] hub 1-0:1.0: 10 ports detected |
| [ 2.291430] ohci-pci: OHCI PCI platform driver |
| [ 2.296079] ohci-pci 0000:00:02.0: OHCI PCI host controller |
| [ 2.301727] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2 |
| [ 2.309240] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc300000 |
| [ 2.332159] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:61:a2 |
| [ 2.342530] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) |
| [ 2.352356] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] |
| [ 2.360271] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit] |
| [ 2.367115] tg3 0000:03:00.0: enabling device (0004 -> 0006) |
| [ 2.372183] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 |
| [ 2.372185] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.372186] usb usb2: Product: OHCI PCI host controller |
| [ 2.372187] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd |
| [ 2.372188] usb usb2: SerialNumber: 0000:00:02.0 |
| [ 2.372329] hub 2-0:1.0: USB hub found |
| [ 2.372337] hub 2-0:1.0: 10 ports detected |
| [ 2.411245] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16 |
| [ 2.453313] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:63:95 |
| [ 2.463677] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) |
| [ 2.473508] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] |
| [ 2.481423] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit] |
| [ 2.492389] FS-Cache: Loaded |
| [ 2.498471] RPC: Registered named UNIX socket transport module. |
| [ 2.504670] RPC: Registered udp transport module. |
| [ 2.510774] RPC: Registered tcp transport module. |
| [ 2.516893] RPC: Registered tcp NFSv4.1 backchannel transport module. |
| [ 2.527771] FS-Cache: Netfs 'nfs' registered for caching |
| [ 2.538475] tg3 0000:02:00.0: irq 44 for MSI/MSI-X |
| [ 2.585955] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready |
| [ 2.701765] tsc: Refined TSC clocksource calibration: 2412.362 MHz |
| [ 3.704714] Switched to clocksource tsc |
| [ 4.175266] tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex |
| [ 4.181871] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX |
| [ 4.188833] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready |
| [ 6.479392] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR) |
| [ 6.493166] systemd[1]: Detected architecture 'x86-64'. |
| [ 7.007979] random: nonblocking pool is initialized |
| [ 7.013960] systemd[1]: Inserted module 'autofs4' |
| [ 7.054509] systemd[1]: Set hostname to <cb-test-tgt>. |
| [ 8.519221] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory. |
| [ 8.532044] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. |
| [ 8.547246] systemd[1]: Expecting device dev-ttyS0.device... |
| [ 8.563178] systemd[1]: Starting Forward Password Requests to Wall Directory Watch. |
| [ 8.571033] systemd[1]: Started Forward Password Requests to Wall Directory Watch. |
| [ 8.578707] systemd[1]: Starting Remote File Systems (Pre). |
| [ 8.595108] systemd[1]: Reached target Remote File Systems (Pre). |
| [ 8.601297] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point. |
| [ 8.623075] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. |
| [ 8.632578] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch. |
| [ 8.640714] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. |
| [ 8.648730] systemd[1]: Starting Paths. |
| [ 8.663045] systemd[1]: Reached target Paths. |
| [ 8.667478] systemd[1]: Starting Encrypted Volumes. |
| [ 8.683026] systemd[1]: Reached target Encrypted Volumes. |
| [ 8.688527] systemd[1]: Starting Swap. |
| [ 8.702991] systemd[1]: Reached target Swap. |
| [ 8.707348] systemd[1]: Starting Root Slice. |
| [ 8.726986] systemd[1]: Created slice Root Slice. |
| [ 8.731786] systemd[1]: Starting User and Session Slice. |
| [ 8.746963] systemd[1]: Created slice User and Session Slice. |
| [ 8.752809] systemd[1]: Starting Delayed Shutdown Socket. |
| [ 8.766941] systemd[1]: Listening on Delayed Shutdown Socket. |
| [ 8.772793] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. |
| [ 8.790896] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. |
| [ 8.797965] systemd[1]: Starting Journal Socket (/dev/log). |
| [ 8.814873] systemd[1]: Listening on Journal Socket (/dev/log). |
| [ 8.820879] systemd[1]: Starting Syslog Socket. |
| [ 8.834852] systemd[1]: Listening on Syslog Socket. |
| [ 8.839837] systemd[1]: Starting udev Kernel Socket. |
| [ 8.854826] systemd[1]: Listening on udev Kernel Socket. |
| [ 8.860250] systemd[1]: Starting udev Control Socket. |
| [ 8.874804] systemd[1]: Listening on udev Control Socket. |
| [ 8.880289] systemd[1]: Starting Journal Socket. |
| [ 8.894777] systemd[1]: Listening on Journal Socket. |
| [ 8.899836] systemd[1]: Starting Sockets. |
| [ 8.914756] systemd[1]: Reached target Sockets. |
| [ 8.919397] systemd[1]: Starting System Slice. |
| [ 8.934732] systemd[1]: Created slice System Slice. |
| [ 8.939716] systemd[1]: Starting system-getty.slice. |
| [ 8.954714] systemd[1]: Created slice system-getty.slice. |
| [ 8.960204] systemd[1]: Starting system-serial\x2dgetty.slice. |
| [ 8.974683] systemd[1]: Created slice system-serial\x2dgetty.slice. |
| [ 8.981578] systemd[1]: Starting Create list of required static device nodes for the current kernel... |
| [ 9.003140] systemd[1]: Mounting Debug File System... |
| [ 9.058757] systemd[1]: Started Set Up Additional Binary Formats. |
| [ 9.064964] systemd[1]: Mounting Huge Pages File System... |
| [ 9.083743] systemd[1]: Starting Load Kernel Modules... |
| [ 9.099048] systemd[1]: Mounting POSIX Message Queue File System... |
| [ 9.115014] systemd[1]: Starting udev Coldplug all Devices... |
| [ 9.130947] systemd[1]: Starting Journal Service... |
| [ 9.154496] systemd[1]: Started Journal Service. |
| [ 10.064959] systemd-udevd[206]: starting version 215 |
| [ 10.370888] systemd-journald[186]: Received request to flush runtime journal from PID 1 |
| [ 12.238249] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 |
| [ 12.246742] input: PC Speaker as /devices/platform/pcspkr/input/input2 |
| [ 12.253487] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled |
| [ 12.261325] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled |
| [ 12.309307] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3 |
| [ 12.317767] ACPI: Power Button [PWRB] |
| [ 12.321566] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 |
| [ 12.329048] ACPI: Power Button [PWRF] |
| [ 12.360868] SCSI subsystem initialized |
| [ 12.511543] libata version 3.00 loaded. |
| [ 12.526736] w83793 0-002f: Registered watchdog chardev major 10, minor: 130 |
| [ 12.533836] i2c i2c-0: nForce2 SMBus adapter at 0x2c80 |
| [ 12.558512] FDC 0 is a post-1991 82077 |
| [ 12.641010] EDAC MC: Ver: 3.0.0 |
| [ 12.683509] acpi-cpufreq: overriding BIOS provided _PSD data |
| [ 12.900438] MCE: In-kernel MCE decoding enabled. |
| [ 12.905811] kvm: Nested Virtualization enabled |
| [ 12.910362] kvm: Nested Paging enabled |
| [ 13.025134] AMD64 EDAC driver v3.4.0 |
| [ 13.199604] *****RAPTOR ENGINEERING KFSN4-DRE AUTOMATED TEST BOOT SUCCESS***** |
| [ 15.766976] i2c i2c-1: nForce2 SMBus adapter at 0x2cc0 |
| [ 15.772291] pata_amd 0000:00:06.0: version 0.4.1 |
| [ 15.773056] scsi0 : pata_amd |
| [ 15.776292] scsi1 : pata_amd |
| [ 15.779350] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3020 irq 14 |
| [ 15.786401] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3028 irq 15 |
| [ 15.793519] sata_nv 0000:00:07.0: version 3.5 |
| [ 15.793940] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21 |
| [ 15.800360] scsi2 : sata_nv |
| [ 15.803408] scsi3 : sata_nv |
| [ 15.806327] ata3: SATA max UDMA/133 cmd 0x3050 ctl 0x3070 bmdma 0x3030 irq 21 |
| [ 15.813551] ata4: SATA max UDMA/133 cmd 0x3058 ctl 0x3074 bmdma 0x3038 irq 21 |
| [ 15.820961] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20 |
| [ 15.827187] scsi4 : sata_nv |
| [ 15.830193] scsi5 : sata_nv |
| [ 15.833139] ata5: SATA max UDMA/133 cmd 0x3060 ctl 0x3078 bmdma 0x3040 irq 20 |
| [ 15.840361] ata6: SATA max UDMA/133 cmd 0x3068 ctl 0x307c bmdma 0x3048 irq 20 |
| [ 15.847635] EDAC amd64: DRAM ECC enabled. |
| [ 15.851771] EDAC amd64: F10h detected (node 0). |
| [ 15.856416] EDAC MC: DCT0 chip selects: |
| [ 15.856421] EDAC amd64: MC: 0: 1024MB 1: 1024MB |
| [ 15.861210] EDAC amd64: MC: 2: 1024MB 3: 1024MB |
| [ 15.866003] EDAC amd64: MC: 4: 1024MB 5: 1024MB |
| [ 15.870783] EDAC amd64: MC: 6: 0MB 7: 0MB |
| [ 15.875569] EDAC MC: DCT1 chip selects: |
| [ 15.875573] EDAC amd64: MC: 0: 0MB 1: 0MB |
| [ 15.880349] EDAC amd64: MC: 2: 0MB 3: 0MB |
| [ 15.885143] EDAC amd64: MC: 4: 0MB 5: 0MB |
| [ 15.889930] EDAC amd64: MC: 6: 0MB 7: 0MB |
| [ 15.894717] EDAC amd64: using x4 syndromes. |
| [ 15.898984] EDAC amd64: MCT channel count: 1 |
| [ 15.903390] EDAC amd64: CS0: Registered DDR2 RAM |
| [ 15.908115] EDAC amd64: CS1: Registered DDR2 RAM |
| [ 15.912818] EDAC amd64: CS2: Registered DDR2 RAM |
| [ 15.917517] EDAC amd64: CS3: Registered DDR2 RAM |
| [ 15.922225] EDAC amd64: CS4: Registered DDR2 RAM |
| [ 15.926914] EDAC amd64: CS5: Registered DDR2 RAM |
| [ 15.932333] EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT) |
| [ 15.942160] EDAC amd64: DRAM ECC disabled. |
| [ 15.946359] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. |
| Either enable ECC checking or force module loading by setting 'ecc_enable_override'. |
| (Note that use of the override may cause unknown side effects.) |
| [ 15.970916] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED) |
| [ 16.130560] ata3: SATA link down (SStatus 0 SControl 300) |
| [ 16.158533] ata5: SATA link down (SStatus 0 SControl 300) |
| [ 16.446202] ata4: SATA link down (SStatus 0 SControl 300) |
| [ 16.761841] ata6: SATA link down (SStatus 0 SControl 300) |