blob: fcf5a6fba44569515cedde46bf2fed76681a9737 [file] [log] [blame]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16-2-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.3 (Debian 4.8.3-11) ) #1 SMP Debian 3.16.3-2 (2014-09-20)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.16-2-amd64 root=UUID=7d4748f5-6bf2-44dd-a78c-7c82355091e1 ro quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c7fbdfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c7fbe000-0x00000000dfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000f8ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: ASROCK E350M1/E350M1, BIOS 4.0-7057-g9ebb3f5 10/17/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x21f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-back
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FF8000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000021f000000 aka 8688M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0xc7fbe max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f4040-0x000f404f] mapped at [ffff8800000f4040]
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01af1000, 0x01af1fff] PGTABLE
[ 0.000000] BRK [0x01af2000, 0x01af2fff] PGTABLE
[ 0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x21ee00000-0x21effffff]
[ 0.000000] [mem 0x21ee00000-0x21effffff] page 2M
[ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x21c000000-0x21edfffff]
[ 0.000000] [mem 0x21c000000-0x21edfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x21bffffff]
[ 0.000000] [mem 0x200000000-0x21bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xc7fbdfff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0xbfffffff] page 1G
[ 0.000000] [mem 0xc0000000-0xc7dfffff] page 2M
[ 0.000000] [mem 0xc7e00000-0xc7fbdfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[ 0.000000] [mem 0x100000000-0x1ffffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x3626e000-0x3712efff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F4020 000014 (v00 CORE )
[ 0.000000] ACPI: RSDT 0x00000000C7FE2624 000040 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: FACP 0x00000000C7FE4D18 0000F4 (v04 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: DSDT 0x00000000C7FE26C8 00260E (v02 ASROCK COREBOOT 00010001 INTL 20140926)
[ 0.000000] ACPI: FACS 0x00000000C7FE4CD8 000040
[ 0.000000] ACPI: HPET 0x00000000C7FE4E10 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: APIC 0x00000000C7FE4E48 00005C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: HEST 0x00000000C7FE4EA8 000028 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: SSDT 0x00000000C7FE4ED0 00168E (v02 AMD ALIB 00000001 MSFT 04000000)
[ 0.000000] ACPI: SSDT 0x00000000C7FE6560 0003DE (v01 AMD POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 0x00000000C7FE6940 000045 (v02 CORE COREBOOT 0000002A CORE 0000002A)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021effffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x21effffff]
[ 0.000000] NODE_DATA [mem 0x21eff9000-0x21effdfff]
[ 0.000000] [ffffea0000000000-ffffea00077fffff] PMD -> [ffff880216c00000-ffff88021d7fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x21effffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0xc7fbdfff]
[ 0.000000] node 0: [mem 0x100000000-0x21effffff]
[ 0.000000] On node 0 totalpages: 1994588
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 11144 pages used for memmap
[ 0.000000] DMA32 zone: 815038 pages, LIFO batch:31
[ 0.000000] Normal zone: 16072 pages used for memmap
[ 0.000000] Normal zone: 1175552 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc7fbe000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xf8ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf9000000-0xffffffff]
[ 0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88021ec00000 s85824 r8192 d20672 u1048576
[ 0.000000] pcpu-alloc: s85824 r8192 d20672 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1967295
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16-2-amd64 root=UUID=7d4748f5-6bf2-44dd-a78c-7c82355091e1 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 7774788K/7978352K available (5188K kernel code, 941K rwdata, 1824K rodata, 1196K init, 840K bss, 203564K reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:33024 nr_irqs:512 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1599.993 MHz processor
[ 0.000055] Calibrating delay loop (skipped), value calculated using timer frequency.. 3199.98 BogoMIPS (lpj=6399972)
[ 0.000061] pid_max: default: 32768 minimum: 301
[ 0.000082] ACPI: Core revision 20140424
[ 0.006420] ACPI: All ACPI Tables successfully acquired
[ 0.006490] Security Framework initialized
[ 0.006513] AppArmor: AppArmor disabled by boot time parameter
[ 0.006516] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.007621] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.013570] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.016315] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.016341] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.017011] Initializing cgroup subsys memory
[ 0.017031] Initializing cgroup subsys devices
[ 0.017050] Initializing cgroup subsys freezer
[ 0.017057] Initializing cgroup subsys net_cls
[ 0.017069] Initializing cgroup subsys blkio
[ 0.017079] Initializing cgroup subsys perf_event
[ 0.017084] Initializing cgroup subsys net_prio
[ 0.017139] tseg: 0000000000
[ 0.017152] CPU: Physical Processor ID: 0
[ 0.017154] CPU: Processor Core ID: 0
[ 0.017158] mce: CPU supports 6 MCE banks
[ 0.017177] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
tlb_flushall_shift: 6
[ 0.017386] Freeing SMP alternatives memory: 20K (ffffffff81a18000 - ffffffff81a1d000)
[ 0.019847] ftrace: allocating 21542 entries in 85 pages
[ 0.039580] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.079278] smpboot: CPU0: AMD E-350 Processor (fam: 14, model: 01, stepping: 00)
[ 0.184555] Performance Events: AMD PMU driver.
[ 0.184565] ... version: 0
[ 0.184568] ... bit width: 48
[ 0.184570] ... generic registers: 4
[ 0.184573] ... value mask: 0000ffffffffffff
[ 0.184575] ... max period: 00007fffffffffff
[ 0.184577] ... fixed-purpose events: 0
[ 0.184580] ... event mask: 000000000000000f
[ 0.188009] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.188291] x86: Booting SMP configuration:
[ 0.188296] .... node #0, CPUs: #1
[ 0.201505] x86: Booted up 1 node, 2 CPUs
[ 0.201510] smpboot: Total of 2 processors activated (6399.97 BogoMIPS)
[ 0.202406] devtmpfs: initialized
[ 0.213199] pinctrl core: initialized pinctrl subsystem
[ 0.213438] NET: Registered protocol family 16
[ 0.213764] cpuidle: using governor ladder
[ 0.213769] cpuidle: using governor menu
[ 0.214032] ACPI: bus type PCI registered
[ 0.214037] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.214312] PCI: Using configuration type 1 for base access
[ 0.214315] PCI: Using configuration type 1 for extended access
[ 0.214798] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.214800] mtrr: probably your BIOS does not setup all CPUs.
[ 0.214803] mtrr: corrected configuration.
[ 0.227656] ACPI: Added _OSI(Module Device)
[ 0.227664] ACPI: Added _OSI(Processor Device)
[ 0.227667] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.227670] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.229969] ACPI: Executed 2 blocks of module-level executable AML code
[ 0.234663] ACPI: Interpreter enabled
[ 0.234683] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[ 0.234710] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.234714] ACPI: Using IOAPIC for interrupt routing
[ 0.234751] HEST: Table parsing has been initialized.
[ 0.234758] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.253675] ACPI: Power Resource [PFN0] (on)
[ 0.254086] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.254098] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.254248] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.254817] PCI host bridge to bus 0000:00
[ 0.254824] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.254829] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.254834] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.254839] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.254843] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff]
[ 0.254860] pci 0000:00:00.0: [1022:1510] type 00 class 0x060000
[ 0.255052] pci 0000:00:01.0: [1002:9802] type 00 class 0x030000
[ 0.255071] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff pref]
[ 0.255081] pci 0000:00:01.0: reg 0x14: [io 0x1000-0x10ff]
[ 0.255092] pci 0000:00:01.0: reg 0x18: [mem 0xf0000000-0xf003ffff]
[ 0.255158] pci 0000:00:01.0: supports D1 D2
[ 0.255241] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.255332] pci 0000:00:01.1: [1002:1314] type 00 class 0x040300
[ 0.255348] pci 0000:00:01.1: reg 0x10: [mem 0xf0040000-0xf0043fff]
[ 0.255424] pci 0000:00:01.1: supports D1 D2
[ 0.255503] pci 0000:00:01.1: System wakeup disabled by ACPI
[ 0.255691] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[ 0.255718] pci 0000:00:11.0: reg 0x10: [io 0x1410-0x1417]
[ 0.255733] pci 0000:00:11.0: reg 0x14: [io 0x1420-0x1423]
[ 0.255747] pci 0000:00:11.0: reg 0x18: [io 0x1418-0x141f]
[ 0.255761] pci 0000:00:11.0: reg 0x1c: [io 0x1424-0x1427]
[ 0.255775] pci 0000:00:11.0: reg 0x20: [io 0x1400-0x140f]
[ 0.255789] pci 0000:00:11.0: reg 0x24: [mem 0xf004b000-0xf004b3ff]
[ 0.256060] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[ 0.256080] pci 0000:00:12.0: reg 0x10: [mem 0xf0048000-0xf0048fff]
[ 0.256226] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.256392] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[ 0.256419] pci 0000:00:12.2: reg 0x10: [mem 0xf004b400-0xf004b4ff]
[ 0.256529] pci 0000:00:12.2: supports D1 D2
[ 0.256533] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.256617] pci 0000:00:12.2: System wakeup disabled by ACPI
[ 0.256776] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[ 0.256797] pci 0000:00:13.0: reg 0x10: [mem 0xf0049000-0xf0049fff]
[ 0.256943] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.257103] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[ 0.257130] pci 0000:00:13.2: reg 0x10: [mem 0xf004b500-0xf004b5ff]
[ 0.257240] pci 0000:00:13.2: supports D1 D2
[ 0.257244] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.257326] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 0.257480] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.257790] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[ 0.257821] pci 0000:00:14.2: reg 0x10: [mem 0xf0044000-0xf0047fff 64bit]
[ 0.257910] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.258134] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[ 0.258425] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.258546] pci 0000:00:14.4: System wakeup disabled by ACPI
[ 0.258634] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[ 0.258654] pci 0000:00:14.5: reg 0x10: [mem 0xf004a000-0xf004afff]
[ 0.258801] pci 0000:00:14.5: System wakeup disabled by ACPI
[ 0.258961] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000
[ 0.259130] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000
[ 0.259294] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000
[ 0.259460] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000
[ 0.259638] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000
[ 0.259802] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000
[ 0.259967] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000
[ 0.260130] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000
[ 0.260525] pci 0000:00:14.4: PCI bridge to [bus 01] (subtractive decode)
[ 0.260541] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.260546] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.260550] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.260555] pci 0000:00:14.4: bridge window [mem 0xe0000000-0xffffffff] (subtractive decode)
[ 0.261331] ACPI: PCI Interrupt Link [INTA] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[ 0.261589] ACPI: PCI Interrupt Link [INTB] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[ 0.261832] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[ 0.262003] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[ 0.262174] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[ 0.262345] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *0, disabled.
[ 0.262480] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[ 0.262660] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[ 0.263000] ACPI: Enabled 6 GPEs in block 00 to 1F
[ 0.263500] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.263516] vgaarb: loaded
[ 0.263519] vgaarb: bridge control possible 0000:00:01.0
[ 0.263677] PCI: Using ACPI for IRQ routing
[ 0.263683] PCI: pci_cache_line_size set to 64 bytes
[ 0.263822] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.263827] e820: reserve RAM buffer [mem 0xc7fbe000-0xc7ffffff]
[ 0.263830] e820: reserve RAM buffer [mem 0x21f000000-0x21fffffff]
[ 0.264195] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.264203] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.266385] Switched to clocksource hpet
[ 0.278128] pnp: PnP ACPI init
[ 0.278169] ACPI: bus type PNP registered
[ 0.278649] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.278941] pnp: PnP ACPI: found 1 devices
[ 0.278945] ACPI: bus type PNP unregistered
[ 0.301778] pci 0000:00:14.4: PCI bridge to [bus 01]
[ 0.301808] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.301813] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.301817] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.301822] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xffffffff]
[ 0.301827] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
[ 0.301831] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
[ 0.301835] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.301839] pci_bus 0000:01: resource 7 [mem 0xe0000000-0xffffffff]
[ 0.302032] NET: Registered protocol family 2
[ 0.302777] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.303207] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.303785] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.303882] TCP: reno registered
[ 0.303917] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.304014] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.304501] NET: Registered protocol family 1
[ 0.304546] pci 0000:00:01.0: Boot video device
[ 0.359909] PCI: CLS 64 bytes, default 64
[ 0.360046] Unpacking initramfs...
[ 0.926962] Freeing initrd memory: 15108K (ffff88003626e000 - ffff88003712f000)
[ 0.927037] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.927043] software IO TLB [mem 0xc3fbe000-0xc7fbe000] (64MB) mapped at [ffff8800c3fbe000-ffff8800c7fbdfff]
[ 0.927567] microcode: CPU0: patch_level=0x05000028
[ 0.927689] microcode: CPU1: patch_level=0x05000028
[ 0.928048] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.928067] LVT offset 0 assigned for vector 0x400
[ 0.928194] perf: AMD IBS detected (0x000000ff)
[ 0.929268] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.929446] audit: initializing netlink subsys (disabled)
[ 0.929499] audit: type=2000 audit(1413564185.816:1): initialized
[ 0.930618] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.930678] zbud: loaded
[ 0.931361] VFS: Disk quotas dquot_6.5.2
[ 0.931505] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.931737] msgmni has been set to 15214
[ 0.934341] alg: No test for stdrng (krng)
[ 0.934680] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.934899] io scheduler noop registered
[ 0.934908] io scheduler deadline registered
[ 0.935085] io scheduler cfq registered (default)
[ 0.935303] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.935345] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.935553] GHES: Failed to enable APEI firmware first mode.
[ 0.935960] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.956678] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.958745] Linux agpgart interface v0.103
[ 0.958980] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.963102] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.963123] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.963996] mousedev: PS/2 mouse device common for all mice
[ 0.964219] rtc_cmos 00:00: RTC can wake from S4
[ 0.964656] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[ 0.964783] rtc_cmos 00:00: alarms up to one day, 114 bytes nvram, hpet irqs
[ 0.964824] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.964956] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[ 0.964960] AMD IOMMUv2 functionality not available on this system
[ 0.965154] TCP: cubic registered
[ 0.965342] NET: Registered protocol family 10
[ 0.966051] mip6: Mobile IPv6
[ 0.966059] NET: Registered protocol family 17
[ 0.966069] mpls_gso: MPLS GSO support
[ 0.967836] registered taskstats version 1
[ 0.969029] rtc_cmos 00:00: setting system clock to 2014-10-17 16:43:06 UTC (1413564186)
[ 0.969164] PM: Hibernation image not present or could not be loaded.
[ 0.971662] Freeing unused kernel memory: 1196K (ffffffff818ed000 - ffffffff81a18000)
[ 0.971672] Write protecting the kernel read-only data: 8192k
[ 0.977228] Freeing unused kernel memory: 944K (ffff880001514000 - ffff880001600000)
[ 0.978666] Freeing unused kernel memory: 224K (ffff8800017c8000 - ffff880001800000)
[ 1.011894] systemd-udevd[60]: starting version 215
[ 1.012550] random: systemd-udevd urandom read with 2 bits of entropy available
[ 1.034038] ACPI: bus type USB registered
[ 1.034113] usbcore: registered new interface driver usbfs
[ 1.034138] usbcore: registered new interface driver hub
[ 1.042696] usbcore: registered new device driver usb
[ 1.045601] SCSI subsystem initialized
[ 1.045930] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.047080] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.047548] ehci-pci: EHCI PCI platform driver
[ 1.047903] QUIRK: Enable AMD PLL fix
[ 1.047941] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 1.047956] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.047971] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.048056] ehci-pci 0000:00:12.2: debug port 1
[ 1.048130] ehci-pci 0000:00:12.2: irq 17, io mem 0xf004b400
[ 1.052304] libata version 3.00 loaded.
[ 1.058535] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.058667] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.058672] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.058677] usb usb1: Product: EHCI Host Controller
[ 1.058681] usb usb1: Manufacturer: Linux 3.16-2-amd64 ehci_hcd
[ 1.058685] usb usb1: SerialNumber: 0000:00:12.2
[ 1.058975] hub 1-0:1.0: USB hub found
[ 1.058994] hub 1-0:1.0: 5 ports detected
[ 1.059762] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 1.059776] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.059788] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.059804] ehci-pci 0000:00:13.2: debug port 1
[ 1.059862] ehci-pci 0000:00:13.2: irq 17, io mem 0xf004b500
[ 1.063336] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.063345] ACPI: Thermal Zone [TZ00] (40 C)
[ 1.067147] ACPI: Fan [FAN0] (on)
[ 1.070489] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.070633] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.070638] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.070643] usb usb2: Product: EHCI Host Controller
[ 1.070647] usb usb2: Manufacturer: Linux 3.16-2-amd64 ehci_hcd
[ 1.070651] usb usb2: SerialNumber: 0000:00:13.2
[ 1.070938] hub 2-0:1.0: USB hub found
[ 1.070957] hub 2-0:1.0: 5 ports detected
[ 1.071938] ohci-pci: OHCI PCI platform driver
[ 1.072325] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 1.072340] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 1.072409] ohci-pci 0000:00:12.0: irq 18, io mem 0xf0048000
[ 1.130709] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.130719] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.130724] usb usb3: Product: OHCI PCI host controller
[ 1.130728] usb usb3: Manufacturer: Linux 3.16-2-amd64 ohci_hcd
[ 1.130732] usb usb3: SerialNumber: 0000:00:12.0
[ 1.131009] hub 3-0:1.0: USB hub found
[ 1.131028] hub 3-0:1.0: 5 ports detected
[ 1.131365] ahci 0000:00:11.0: version 3.0
[ 1.131912] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 1.131919] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part
[ 1.134254] scsi0 : ahci
[ 1.134971] scsi1 : ahci
[ 1.135335] scsi2 : ahci
[ 1.135510] scsi3 : ahci
[ 1.135707] scsi4 : ahci
[ 1.135946] scsi5 : ahci
[ 1.136063] ata1: SATA max UDMA/133 abar m1024@0xf004b000 port 0xf004b100 irq 19
[ 1.136069] ata2: SATA max UDMA/133 abar m1024@0xf004b000 port 0xf004b180 irq 19
[ 1.136074] ata3: SATA max UDMA/133 abar m1024@0xf004b000 port 0xf004b200 irq 19
[ 1.136079] ata4: SATA max UDMA/133 abar m1024@0xf004b000 port 0xf004b280 irq 19
[ 1.136084] ata5: SATA max UDMA/133 abar m1024@0xf004b000 port 0xf004b300 irq 19
[ 1.136088] ata6: SATA max UDMA/133 abar m1024@0xf004b000 port 0xf004b380 irq 19
[ 1.136581] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 1.136600] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 4
[ 1.136654] ohci-pci 0000:00:13.0: irq 18, io mem 0xf0049000
[ 1.194794] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.194803] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.194808] usb usb4: Product: OHCI PCI host controller
[ 1.194812] usb usb4: Manufacturer: Linux 3.16-2-amd64 ohci_hcd
[ 1.194816] usb usb4: SerialNumber: 0000:00:13.0
[ 1.195430] hub 4-0:1.0: USB hub found
[ 1.195457] hub 4-0:1.0: 5 ports detected
[ 1.196101] ohci-pci 0000:00:14.5: OHCI PCI host controller
[ 1.196115] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 5
[ 1.196170] ohci-pci 0000:00:14.5: irq 18, io mem 0xf004a000
[ 1.254850] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.254860] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.254865] usb usb5: Product: OHCI PCI host controller
[ 1.254869] usb usb5: Manufacturer: Linux 3.16-2-amd64 ohci_hcd
[ 1.254873] usb usb5: SerialNumber: 0000:00:14.5
[ 1.255481] hub 5-0:1.0: USB hub found
[ 1.255507] hub 5-0:1.0: 2 ports detected
[ 1.370810] usb 1-2: new high-speed USB device number 2 using ehci-pci
[ 1.454674] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.454728] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.454791] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.454821] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.454852] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.626668] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.627436] ata1.00: ATA-9: SanDisk SDSSDP064G, 2.0.0, max UDMA/133
[ 1.627452] ata1.00: 125045424 sectors, multi 1: LBA48 NCQ (depth 31/32)
[ 1.628081] ata1.00: configured for UDMA/133
[ 1.628625] scsi 0:0:0:0: Direct-Access ATA SanDisk SDSSDP06 0 PQ: 0 ANSI: 5
[ 1.661993] sd 0:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
[ 1.662114] sd 0:0:0:0: [sda] Write Protect is off
[ 1.662120] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.662158] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.663065] sda: sda1
[ 1.663655] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.664776] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.816589] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 1.926528] tsc: Refined TSC clocksource calibration: 1599.999 MHz
[ 2.225664] fuse init (API version 7.23)
[ 2.364475] systemd-udevd[169]: starting version 215
[ 2.527982] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 2.527996] ACPI: Power Button [PWRB]
[ 2.528115] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 2.528120] ACPI: Power Button [PWRF]
[ 2.531590] ACPI: acpi_idle registered with cpuidle
[ 2.548592] acpi-cpufreq: overriding BIOS provided _PSD data
[ 2.563442] [drm] Initialized drm 1.1.0 20060810
[ 2.575460] ACPI Warning: SystemIO range 0x0000000000000b00-0x0000000000000b07 conflicts with OpRegion 0x0000000000000b00-0x0000000000000b0b (\SMB0) (20140424/utaddress-258)
[ 2.575478] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.579178] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[ 2.579302] sp5100_tco: PCI Revision ID: 0x42
[ 2.579345] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
[ 2.579359] sp5100_tco: Last reboot was not triggered by watchdog.
[ 2.582973] sp5100_tco: initialized (0xffffc90000e3ab00). heartbeat=60 sec (nowayout=0)
[ 2.587623] snd_hda_intel 0000:00:01.1: irq 40 for MSI/MSI-X
[ 2.607952] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 2.640845] [drm] radeon kernel modesetting enabled.
[ 2.642012] kvm: Nested Virtualization enabled
[ 2.642022] kvm: Nested Paging enabled
[ 2.645623] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input7
[ 2.647451] [drm] initializing kernel modesetting (PALM 0x1002:0x9802 0x1002:0x9802).
[ 2.647479] [drm] register mmio base: 0xF0000000
[ 2.647481] [drm] register mmio size: 262144
[ 2.647574] ATOM BIOS: AMD
[ 2.647662] radeon 0000:00:01.0: VRAM: 384M 0x0000000000000000 - 0x0000000017FFFFFF (384M used)
[ 2.647668] radeon 0000:00:01.0: GTT: 1024M 0x0000000018000000 - 0x0000000057FFFFFF
[ 2.647672] [drm] Detected VRAM RAM=384M, BAR=256M
[ 2.647675] [drm] RAM width 32bits DDR
[ 2.650196] sound hdaudioC1D0: ALC892: SKU not ready 0x00000100
[ 2.650709] sound hdaudioC1D0: autoconfig: line_outs=4 (0x14/0x16/0x15/0x17/0x0) type:line
[ 2.650715] sound hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 2.650723] sound hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 2.650727] sound hdaudioC1D0: mono: mono_out=0x0
[ 2.650731] sound hdaudioC1D0: dig-out=0x1e/0x0
[ 2.650734] sound hdaudioC1D0: inputs:
[ 2.650740] sound hdaudioC1D0: Rear Mic=0x18
[ 2.650744] sound hdaudioC1D0: Front Mic=0x19
[ 2.650748] sound hdaudioC1D0: Line=0x1a
[ 2.650751] sound hdaudioC1D0: CD=0x1c
[ 2.673459] [TTM] Zone kernel: Available graphics memory: 3896140 kiB
[ 2.673468] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 2.673471] [TTM] Initializing pool allocator
[ 2.673482] [TTM] Initializing DMA pool allocator
[ 2.673528] [drm] radeon: 384M of VRAM memory ready
[ 2.673534] [drm] radeon: 1024M of GTT memory ready.
[ 2.673574] [drm] Loading PALM Microcode
[ 2.675365] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/PALM_pfp.bin
[ 2.676410] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/PALM_me.bin
[ 2.677699] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/SUMO_rlc.bin
[ 2.677718] [drm] Internal thermal controller without fan control
[ 2.677827] [drm] Found smc ucode version: 0x00010601
[ 2.677918] [drm] radeon: dpm initialized
[ 2.680912] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/SUMO_uvd.bin
[ 2.681063] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 2.706897] [drm] PCIE GART of 1024M enabled (table at 0x0000000000273000).
[ 2.709163] radeon 0000:00:01.0: WB enabled
[ 2.709176] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000018000c00 and cpu addr 0xffff8800c3a52c00
[ 2.709181] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000018000c0c and cpu addr 0xffff8800c3a52c0c
[ 2.709970] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90000fb2118
[ 2.709975] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.709978] [drm] Driver supports precise vblank timestamp query.
[ 2.710018] radeon 0000:00:01.0: irq 41 for MSI/MSI-X
[ 2.710046] radeon 0000:00:01.0: radeon: using MSI.
[ 2.710085] [drm] radeon: irq initialized.
[ 2.735817] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/sound/card1/hdaudioC1D0/input8
[ 2.736511] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input9
[ 2.736650] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
[ 2.736795] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
[ 2.736929] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card1/input12
[ 2.737067] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card1/input13
[ 2.737204] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card1/input14
[ 2.737342] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card1/input15
[ 2.737477] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input16
[ 2.746429] [drm] ring test on 0 succeeded in 1 usecs
[ 2.746494] [drm] ring test on 3 succeeded in 1 usecs
[ 2.804101] [drm] ring test on 5 succeeded in 1 usecs
[ 2.824099] [drm] UVD initialized successfully.
[ 2.824908] [drm] ib test on ring 0 succeeded in 0 usecs
[ 2.824954] [drm] ib test on ring 3 succeeded in 0 usecs
[ 2.845889] [drm] ib test on ring 5 succeeded
[ 2.866999] [drm] Radeon Display Connectors
[ 2.867005] [drm] Connector 0:
[ 2.867008] [drm] HDMI-A-1
[ 2.867011] [drm] HPD1
[ 2.867015] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[ 2.867018] [drm] Encoders:
[ 2.867020] [drm] DFP1: INTERNAL_UNIPHY
[ 2.867023] [drm] Connector 1:
[ 2.867025] [drm] HDMI-A-2
[ 2.867027] [drm] HPD2
[ 2.867030] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[ 2.867032] [drm] Encoders:
[ 2.867034] [drm] DFP2: INTERNAL_UNIPHY
[ 2.867036] [drm] Connector 2:
[ 2.867038] [drm] VGA-1
[ 2.867041] [drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
[ 2.867043] [drm] Encoders:
[ 2.867046] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 2.907886] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 2.935111] Switched to clocksource tsc
[ 2.942916] systemd-journald[150]: Received request to flush runtime journal from PID 1
[ 2.948239] [drm] fb mappable at 0xE0477000
[ 2.948249] [drm] vram apper at 0xE0000000
[ 2.948252] [drm] size 3686400
[ 2.948254] [drm] fb depth is 24
[ 2.948257] [drm] pitch is 5120
[ 2.948486] fbcon: radeondrmfb (fb0) is primary device
[ 2.978214] Console: switching to colour frame buffer device 160x45
[ 2.985601] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
[ 2.985607] radeon 0000:00:01.0: registered panic notifier
[ 2.990553] [drm] Initialized radeon 2.39.0 20080528 for 0000:00:01.0 on minor 0
[ 3.186113] random: nonblocking pool is initialized
[ 16.482695] usb 1-2: device descriptor read/64, error -110
[ 31.698469] usb 1-2: device descriptor read/64, error -110
[ 31.918576] usb 1-2: new high-speed USB device number 3 using ehci-pci
[ 47.031099] usb 1-2: device descriptor read/64, error -110
[ 62.246640] usb 1-2: device descriptor read/64, error -110
[ 62.462925] usb 1-2: new high-speed USB device number 4 using ehci-pci
[ 67.483142] usb 1-2: device descriptor read/8, error -110
[ 72.603053] usb 1-2: device descriptor read/8, error -110
[ 72.819106] usb 1-2: new high-speed USB device number 5 using ehci-pci
[ 77.839135] usb 1-2: device descriptor read/8, error -110
[ 82.958952] usb 1-2: device descriptor read/8, error -110
[ 83.063184] usb usb1-port2: unable to enumerate USB device
[ 83.394844] usb 4-2: new low-speed USB device number 2 using ohci-pci
[ 83.588156] usb 4-2: New USB device found, idVendor=046d, idProduct=c31b
[ 83.588174] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 83.588183] usb 4-2: Product: Logitech USB Keyboard
[ 83.588191] usb 4-2: Manufacturer: Logitech
[ 83.676689] hidraw: raw HID events driver (C) Jiri Kosina
[ 83.704737] usbcore: registered new interface driver usbhid
[ 83.704771] usbhid: USB HID core driver
[ 83.709728] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:13.0/usb4/4-2/4-2:1.0/0003:046D:C31B.0001/input/input17
[ 83.710905] hid-generic 0003:046D:C31B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:13.0-2/input0
[ 83.716515] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:13.0/usb4/4-2/4-2:1.1/0003:046D:C31B.0002/input/input18
[ 83.716921] hid-generic 0003:046D:C31B.0002: input,hidraw1: USB HID v1.11 Device [Logitech Logitech USB Keyboard] on usb-0000:00:13.0-2/input1
[ 83.994865] usb 3-2: new full-speed USB device number 2 using ohci-pci
[ 99.130852] usb 3-2: device descriptor read/64, error -110
[ 114.370845] usb 3-2: device descriptor read/64, error -110
[ 114.611008] usb 3-2: new full-speed USB device number 3 using ohci-pci
[ 129.746694] usb 3-2: device descriptor read/64, error -110
[ 144.986819] usb 3-2: device descriptor read/64, error -110
[ 145.226824] usb 3-2: new full-speed USB device number 4 using ohci-pci
[ 150.247125] usb 3-2: device descriptor read/8, error -110
[ 155.367114] usb 3-2: device descriptor read/8, error -110
[ 155.606817] usb 3-2: new full-speed USB device number 5 using ohci-pci
[ 160.627122] usb 3-2: device descriptor read/8, error -110
[ 165.747125] usb 3-2: device descriptor read/8, error -110
[ 165.850910] usb usb3-port2: unable to enumerate USB device