blob: 1c37e2ae11e85c64cba2310a8414d955a68a20c5 [file] [log] [blame]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.11.0-13-generic (root@amd-desktop) (gcc version 4.8.1 (Ubuntu/Linaro 4.8.1-10ubuntu9) ) #20 SMP Wed Nov 27 05:54:32 EST 2013 (Ubuntu 3.11.0-13.20-generic 3.11.6)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.11.0-13-generic root=UUID=39bae622-efc7-4a51-9545-aa6bd5df8382 ro crashkernel=384M-2G:64M,2G-:128M quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf10efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf10f000-0x00000000dfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: AMD DB-FT3/DB-FT3, BIOS 4.0-7005-gb9a0809 10/09/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x120000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-back
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 0080000000 mask FFC0000000 write-back
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 base 00FFC00000 mask FFFFC00000 write-protect
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000120000000 aka 4608M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0xbf10f max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f1a60-0x000f1a6f] mapped at [ffff8800000f1a60]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01fd1000, 0x01fd1fff] PGTABLE
[ 0.000000] BRK [0x01fd2000, 0x01fd2fff] PGTABLE
[ 0.000000] BRK [0x01fd3000, 0x01fd3fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x11fe00000-0x11fffffff]
[ 0.000000] [mem 0x11fe00000-0x11fffffff] page 2M
[ 0.000000] BRK [0x01fd4000, 0x01fd4fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x11c000000-0x11fdfffff]
[ 0.000000] [mem 0x11c000000-0x11fdfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x11bffffff]
[ 0.000000] [mem 0x100000000-0x11bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbf10efff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0xbeffffff] page 2M
[ 0.000000] [mem 0xbf000000-0xbf10efff] page 4k
[ 0.000000] RAMDISK: [mem 0x35eaa000-0x36f4cfff]
[ 0.000000] Reserving 128MB of memory at 720MB for crashkernel (System RAM: 3568MB)
[ 0.000000] ACPI: RSDP 00000000000f1a40 00014 (v00 CORE )
[ 0.000000] ACPI: RSDT 00000000bf132624 00040 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: FACP 00000000bf133d48 000F4 (v04 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: DSDT 00000000bf1326c8 01640 (v02 AMD COREBOOT 00010001 INTL 20130626)
[ 0.000000] ACPI: FACS 00000000bf133d08 00040
[ 0.000000] ACPI: HPET 00000000bf133e40 00038 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: APIC 00000000bf133e78 0007E (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: HEST 00000000bf133ef8 001D0 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: SSDT 00000000bf1340d0 046D1 (v02 AMD AGESA 00000002 MSFT 04000000)
[ 0.000000] ACPI: SSDT 00000000bf1387b0 00CB4 (v01 AMD AGESA 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 00000000bf139464 00045 (v02 CORE COREBOOT 0000002A CORE 0000002A)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000011fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x11fffffff]
[ 0.000000] NODE_DATA [mem 0x11fff9000-0x11fffdfff]
[ 0.000000] [ffffea0000000000-ffffea00047fffff] PMD -> [ffff88011be00000-ffff88011f5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x11fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0xbf10efff]
[ 0.000000] node 0: [mem 0x100000000-0x11fffffff]
[ 0.000000] On node 0 totalpages: 913581
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12165 pages used for memmap
[ 0.000000] DMA32 zone: 778511 pages, LIFO batch:31
[ 0.000000] Normal zone: 2048 pages used for memmap
[ 0.000000] Normal zone: 131072 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x818
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfec20000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 5, version 33, address 0xfec20000, GSI 24-55
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 72
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf10f000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xffffffff]
[ 0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88011fc00000 s86720 r8192 d23872 u524288
[ 0.000000] pcpu-alloc: s86720 r8192 d23872 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 899283
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.11.0-13-generic root=UUID=39bae622-efc7-4a51-9545-aa6bd5df8382 ro crashkernel=384M-2G:64M,2G-:128M quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 0 size 32 MB
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ b4000000
[ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
[ 0.000000] Memory: 3300240K/3654324K available (7141K kernel code, 1081K rwdata, 3260K rodata, 1364K init, 1420K bss, 354084K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-255.
[ 0.000000] NR_IRQS:16640 nr_irqs:1024 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 14680064 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 1996.309 MHz processor
[ 0.000004] Calibrating delay loop (skipped), value calculated using timer frequency.. 3992.61 BogoMIPS (lpj=7985236)
[ 0.000009] pid_max: default: 32768 minimum: 301
[ 0.000051] Security Framework initialized
[ 0.000079] AppArmor: AppArmor initialized
[ 0.000082] Yama: becoming mindful.
[ 0.000592] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.002295] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.003021] Mount-cache hash table entries: 256
[ 0.003324] Initializing cgroup subsys memory
[ 0.003343] Initializing cgroup subsys devices
[ 0.003346] Initializing cgroup subsys freezer
[ 0.003349] Initializing cgroup subsys blkio
[ 0.003351] Initializing cgroup subsys perf_event
[ 0.003356] Initializing cgroup subsys hugetlb
[ 0.003389] tseg: 0000000000
[ 0.003399] CPU: Physical Processor ID: 0
[ 0.003401] CPU: Processor Core ID: 0
[ 0.003404] mce: CPU supports 6 MCE banks
[ 0.003413] LVT offset 1 assigned for vector 0xf9
[ 0.003421] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[ 0.003421] Last level dTLB entries: 4KB 512, 2MB 256, 4MB 128
[ 0.003421] tlb_flushall_shift: 5
[ 0.003584] Freeing SMP alternatives memory: 28K (ffffffff81e65000 - ffffffff81e6c000)
[ 0.006776] ACPI: Core revision 20130517
[ 0.012031] ACPI: All ACPI Tables successfully acquired
[ 0.012040] ftrace: allocating 27803 entries in 109 pages
[ 0.029456] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.069154] smpboot: CPU0: AMD Eng Sample: 2M201079J4461_00/20/08/06_9830 (fam: 16, model: 00, stepping: 01)
[ 0.175692] Performance Events: AMD PMU driver.
[ 0.175699] ... version: 0
[ 0.175701] ... bit width: 48
[ 0.175703] ... generic registers: 4
[ 0.175705] ... value mask: 0000ffffffffffff
[ 0.175707] ... max period: 00007fffffffffff
[ 0.175709] ... fixed-purpose events: 0
[ 0.175711] ... event mask: 000000000000000f
[ 0.178396] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.178543] smpboot: Booting Node 0, Processors #1 #2 #3 OK
[ 0.218240] Brought up 4 CPUs
[ 0.218248] smpboot: Total of 4 processors activated (15970.47 BogoMIPS)
[ 0.219343] devtmpfs: initialized
[ 0.221325] EVM: security.selinux
[ 0.221327] EVM: security.SMACK64
[ 0.221330] EVM: security.capability
[ 0.222986] regulator-dummy: no parameters
[ 0.223019] RTC time: 18:41:26, date: 03/19/14
[ 0.223080] NET: Registered protocol family 16
[ 0.223348] ACPI: bus type PCI registered
[ 0.223352] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.223427] PCI: Using configuration type 1 for base access
[ 0.223429] PCI: Using configuration type 1 for extended access
[ 0.223717] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.223720] mtrr: probably your BIOS does not setup all CPUs.
[ 0.223721] mtrr: corrected configuration.
[ 0.225001] bio: create slab <bio-0> at 0
[ 0.225286] ACPI: Added _OSI(Module Device)
[ 0.225289] ACPI: Added _OSI(Processor Device)
[ 0.225291] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.225294] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.226318] ACPI: EC: Look up EC in DSDT
[ 0.227431] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.233143] ACPI: Interpreter enabled
[ 0.233177] ACPI: (supports S0 S1 S2 S3 S4 S5)
[ 0.233179] ACPI: Using IOAPIC for interrupt routing
[ 0.233199] HEST: Table parsing has been initialized.
[ 0.233204] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.233296] ACPI: No dock devices found.
[ 0.237516] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.237610] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
[ 0.237694] acpi PNP0A08:00: ACPI _OSC control (0x1d) granted
[ 0.237816] acpi PNP0A08:00: host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x03b0-0x03df] ignored
[ 0.237963] PCI host bridge to bus 0000:00
[ 0.237968] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.237972] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.237975] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.237979] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.237982] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.237986] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff]
[ 0.237998] pci 0000:00:00.0: [1022:1536] type 00 class 0x060000
[ 0.238134] pci 0000:00:01.0: [1002:9830] type 00 class 0x030000
[ 0.238151] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.238164] pci 0000:00:01.0: reg 0x18: [mem 0xf0000000-0xf07fffff 64bit pref]
[ 0.238173] pci 0000:00:01.0: reg 0x20: [io 0x2000-0x20ff]
[ 0.238182] pci 0000:00:01.0: reg 0x24: [mem 0xf0a00000-0xf0a3ffff]
[ 0.238191] pci 0000:00:01.0: reg 0x30: [mem 0xf0a40000-0xf0a5ffff pref]
[ 0.238232] pci 0000:00:01.0: supports D1 D2
[ 0.238236] pci 0000:00:01.0: PME# supported from D1 D2 D3hot
[ 0.238344] pci 0000:00:01.1: [1002:9840] type 00 class 0x040300
[ 0.238359] pci 0000:00:01.1: reg 0x10: [mem 0xf0a60000-0xf0a63fff 64bit]
[ 0.238427] pci 0000:00:01.1: supports D1 D2
[ 0.238526] pci 0000:00:02.0: [1022:1538] type 00 class 0x060000
[ 0.238650] pci 0000:00:02.3: [1022:1439] type 01 class 0x060400
[ 0.238728] pci 0000:00:02.3: PME# supported from D0 D3hot D3cold
[ 0.238799] pci 0000:00:02.3: System wakeup disabled by ACPI
[ 0.238875] pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
[ 0.238896] pci 0000:00:10.0: reg 0x10: [mem 0xf0a68000-0xf0a69fff 64bit]
[ 0.238992] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[ 0.239067] pci 0000:00:10.0: System wakeup disabled by ACPI
[ 0.239127] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
[ 0.239145] pci 0000:00:11.0: reg 0x10: [io 0x2410-0x2417]
[ 0.239155] pci 0000:00:11.0: reg 0x14: [io 0x2420-0x2423]
[ 0.239165] pci 0000:00:11.0: reg 0x18: [io 0x2418-0x241f]
[ 0.239175] pci 0000:00:11.0: reg 0x1c: [io 0x2424-0x2427]
[ 0.239185] pci 0000:00:11.0: reg 0x20: [io 0x2400-0x240f]
[ 0.239195] pci 0000:00:11.0: reg 0x24: [mem 0xf0a6c000-0xf0a6c3ff]
[ 0.239236] pci 0000:00:11.0: PME# supported from D3hot
[ 0.239340] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
[ 0.239359] pci 0000:00:12.0: reg 0x10: [mem 0xf0a6a000-0xf0a6afff]
[ 0.239491] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.239545] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
[ 0.239565] pci 0000:00:12.2: reg 0x10: [mem 0xf0a6c400-0xf0a6c4ff]
[ 0.239645] pci 0000:00:12.2: supports D1 D2
[ 0.239648] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.239720] pci 0000:00:12.2: System wakeup disabled by ACPI
[ 0.239776] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
[ 0.239794] pci 0000:00:13.0: reg 0x10: [mem 0xf0a6b000-0xf0a6bfff]
[ 0.239927] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.239986] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
[ 0.240006] pci 0000:00:13.2: reg 0x10: [mem 0xf0a6c500-0xf0a6c5ff]
[ 0.240086] pci 0000:00:13.2: supports D1 D2
[ 0.240089] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.240154] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 0.240206] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
[ 0.240356] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
[ 0.240378] pci 0000:00:14.2: reg 0x10: [mem 0xf0a64000-0xf0a67fff 64bit]
[ 0.240446] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.240544] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
[ 0.240693] pci 0000:00:14.7: [1022:7813] type 00 class 0x080501
[ 0.240711] pci 0000:00:14.7: reg 0x10: [mem 0xf0a6c600-0xf0a6c6ff 64bit]
[ 0.240841] pci 0000:00:18.0: [1022:1530] type 00 class 0x060000
[ 0.240942] pci 0000:00:18.1: [1022:1531] type 00 class 0x060000
[ 0.241043] pci 0000:00:18.2: [1022:1532] type 00 class 0x060000
[ 0.241142] pci 0000:00:18.3: [1022:1533] type 00 class 0x060000
[ 0.241247] pci 0000:00:18.4: [1022:1534] type 00 class 0x060000
[ 0.241347] pci 0000:00:18.5: [1022:1535] type 00 class 0x060000
[ 0.241536] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[ 0.241554] pci 0000:01:00.0: reg 0x10: [io 0x1000-0x10ff]
[ 0.241584] pci 0000:01:00.0: reg 0x18: [mem 0xf0804000-0xf0804fff 64bit pref]
[ 0.241603] pci 0000:01:00.0: reg 0x20: [mem 0xf0800000-0xf0803fff 64bit pref]
[ 0.241679] pci 0000:01:00.0: supports D1 D2
[ 0.241682] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.241764] pci 0000:01:00.1: [10ec:816a] type 00 class 0x070002
[ 0.241783] pci 0000:01:00.1: reg 0x10: [io 0x1400-0x14ff]
[ 0.241811] pci 0000:01:00.1: reg 0x18: [mem 0xf090c000-0xf090cfff 64bit]
[ 0.241830] pci 0000:01:00.1: reg 0x20: [mem 0xf0900000-0xf0903fff 64bit]
[ 0.241906] pci 0000:01:00.1: supports D1 D2
[ 0.241909] pci 0000:01:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.241988] pci 0000:01:00.2: [10ec:816b] type 00 class 0x070002
[ 0.242006] pci 0000:01:00.2: reg 0x10: [io 0x1800-0x18ff]
[ 0.242035] pci 0000:01:00.2: reg 0x18: [mem 0xf090d000-0xf090dfff 64bit]
[ 0.242053] pci 0000:01:00.2: reg 0x20: [mem 0xf0904000-0xf0907fff 64bit]
[ 0.242129] pci 0000:01:00.2: supports D1 D2
[ 0.242132] pci 0000:01:00.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.242210] pci 0000:01:00.3: [10ec:816c] type 00 class 0x0c0701
[ 0.242229] pci 0000:01:00.3: reg 0x10: [io 0x1c00-0x1cff]
[ 0.242257] pci 0000:01:00.3: reg 0x18: [mem 0xf090e000-0xf090e0ff 64bit]
[ 0.242276] pci 0000:01:00.3: reg 0x20: [mem 0xf0908000-0xf090bfff 64bit]
[ 0.242352] pci 0000:01:00.3: supports D1 D2
[ 0.242355] pci 0000:01:00.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.247729] pci 0000:00:02.3: PCI bridge to [bus 01]
[ 0.247737] pci 0000:00:02.3: bridge window [io 0x1000-0x1fff]
[ 0.247742] pci 0000:00:02.3: bridge window [mem 0xf0900000-0xf09fffff]
[ 0.247749] pci 0000:00:02.3: bridge window [mem 0xf0800000-0xf08fffff 64bit pref]
[ 0.247933] ACPI: PCI Interrupt Link [INTA] (IRQs *3 4 5 7 10 11 12 15)
[ 0.248017] ACPI: PCI Interrupt Link [INTB] (IRQs 3 *4 5 7 10 11 12 15)
[ 0.248099] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 *5 7 10 11 12 15)
[ 0.248179] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 *7 10 11 12 15)
[ 0.248259] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 *11 12 15)
[ 0.248339] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *10
[ 0.248415] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0
[ 0.248495] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0
[ 0.248769] ACPI: Enabled 5 GPEs in block 00 to 1F
[ 0.248780] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.248815] Found 1 acpi root devices
[ 0.248968] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.248975] vgaarb: loaded
[ 0.248976] vgaarb: bridge control possible 0000:00:01.0
[ 0.249271] SCSI subsystem initialized
[ 0.249275] ACPI: bus type ATA registered
[ 0.249353] libata version 3.00 loaded.
[ 0.249378] ACPI: bus type USB registered
[ 0.249404] usbcore: registered new interface driver usbfs
[ 0.249420] usbcore: registered new interface driver hub
[ 0.249459] usbcore: registered new device driver usb
[ 0.249638] PCI: Using ACPI for IRQ routing
[ 0.249642] PCI: pci_cache_line_size set to 64 bytes
[ 0.249703] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.249706] e820: reserve RAM buffer [mem 0xbf10f000-0xbfffffff]
[ 0.249846] NetLabel: Initializing
[ 0.249849] NetLabel: domain hash size = 128
[ 0.249851] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.249867] NetLabel: unlabeled traffic allowed by default
[ 0.249970] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.249976] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.252029] Switched to clocksource hpet
[ 0.259906] AppArmor: AppArmor Filesystem Enabled
[ 0.259958] pnp: PnP ACPI init
[ 0.259988] ACPI: bus type PNP registered
[ 0.260255] system 00:00: [mem 0xfec10002-0xfec11001] has been reserved
[ 0.260262] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.260316] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.260358] pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.260377] pnp 00:03: [dma 4]
[ 0.260411] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.260456] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.260641] pnp: PnP ACPI: found 5 devices
[ 0.260644] ACPI: bus type PNP unregistered
[ 0.268259] pci 0000:00:02.3: PCI bridge to [bus 01]
[ 0.268265] pci 0000:00:02.3: bridge window [io 0x1000-0x1fff]
[ 0.268271] pci 0000:00:02.3: bridge window [mem 0xf0900000-0xf09fffff]
[ 0.268277] pci 0000:00:02.3: bridge window [mem 0xf0800000-0xf08fffff 64bit pref]
[ 0.268378] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.268382] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.268385] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.268389] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.268392] pci_bus 0000:00: resource 8 [mem 0xe0000000-0xffffffff]
[ 0.268395] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
[ 0.268399] pci_bus 0000:01: resource 1 [mem 0xf0900000-0xf09fffff]
[ 0.268402] pci_bus 0000:01: resource 2 [mem 0xf0800000-0xf08fffff 64bit pref]
[ 0.268453] NET: Registered protocol family 2
[ 0.268725] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.268940] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.269091] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.269139] TCP: reno registered
[ 0.269153] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.269183] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.269296] NET: Registered protocol family 1
[ 0.269317] pci 0000:00:01.0: Boot video device
[ 0.324593] PCI: CLS 64 bytes, default 64
[ 0.324669] Trying to unpack rootfs image as initramfs...
[ 0.753911] Freeing initrd memory: 17036K (ffff880035eaa000 - ffff880036f4d000)
[ 0.753923] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.753927] software IO TLB [mem 0xbb10f000-0xbf10f000] (64MB) mapped at [ffff8800bb10f000-ffff8800bf10efff]
[ 0.754182] perf: AMD NB counters detected
[ 0.754191] perf: AMD L2I counters detected
[ 0.754216] LVT offset 0 assigned for vector 0x400
[ 0.754250] perf: AMD IBS detected (0x000000ff)
[ 0.754304] Scanning for low memory corruption every 60 seconds
[ 0.754750] Initialise module verification
[ 0.754821] audit: initializing netlink socket (disabled)
[ 0.754839] type=2000 audit(1395254486.644:1): initialized
[ 0.797625] bounce pool size: 64 pages
[ 0.797640] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.799532] zbud: loaded
[ 0.799710] VFS: Disk quotas dquot_6.5.2
[ 0.799775] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.800553] fuse init (API version 7.22)
[ 0.800678] msgmni has been set to 6479
[ 0.801370] Key type asymmetric registered
[ 0.801374] Asymmetric key parser 'x509' registered
[ 0.801444] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.801506] io scheduler noop registered
[ 0.801510] io scheduler deadline registered (default)
[ 0.801560] io scheduler cfq registered
[ 0.801746] pcieport 0000:00:02.3: irq 72 for MSI/MSI-X
[ 0.801858] pcieport 0000:00:02.3: Signaling PME through PCIe PME interrupt
[ 0.801863] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.801866] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
[ 0.801869] pci 0000:01:00.2: Signaling PME through PCIe PME interrupt
[ 0.801872] pci 0000:01:00.3: Signaling PME through PCIe PME interrupt
[ 0.801877] pcie_pme 0000:00:02.3:pcie01: service driver pcie_pme loaded
[ 0.801897] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.801919] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.802092] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.802100] ACPI: Power Button [PWRB]
[ 0.802159] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.802163] ACPI: Power Button [PWRF]
[ 0.802248] ACPI: acpi_idle registered with cpuidle
[ 0.802543] GHES: Failed to enable APEI firmware first mode.
[ 0.802647] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.823372] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.825651] Linux agpgart interface v0.103
[ 0.827588] brd: module loaded
[ 0.828722] loop: module loaded
[ 0.829278] libphy: Fixed MDIO Bus: probed
[ 0.829412] tun: Universal TUN/TAP device driver, 1.6
[ 0.829414] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.829479] PPP generic driver version 2.4.2
[ 0.829535] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.829538] ehci-pci: EHCI PCI platform driver
[ 0.829670] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 0.829680] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 0.829690] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 0.829703] ehci-pci 0000:00:12.2: debug port 1
[ 0.829757] ehci-pci 0000:00:12.2: irq 17, io mem 0xf0a6c400
[ 0.840130] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 0.840161] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.840164] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.840167] usb usb1: Product: EHCI Host Controller
[ 0.840170] usb usb1: Manufacturer: Linux 3.11.0-13-generic ehci_hcd
[ 0.840173] usb usb1: SerialNumber: 0000:00:12.2
[ 0.840308] hub 1-0:1.0: USB hub found
[ 0.840316] hub 1-0:1.0: 4 ports detected
[ 0.840524] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 0.840532] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 0.840538] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 0.840550] ehci-pci 0000:00:13.2: debug port 1
[ 0.840576] ehci-pci 0000:00:13.2: irq 17, io mem 0xf0a6c500
[ 0.852142] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 0.852163] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.852167] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.852169] usb usb2: Product: EHCI Host Controller
[ 0.852172] usb usb2: Manufacturer: Linux 3.11.0-13-generic ehci_hcd
[ 0.852175] usb usb2: SerialNumber: 0000:00:13.2
[ 0.852293] hub 2-0:1.0: USB hub found
[ 0.852299] hub 2-0:1.0: 4 ports detected
[ 0.852423] ehci-platform: EHCI generic platform driver
[ 0.852434] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.852436] ohci-platform: OHCI generic platform driver
[ 0.852445] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.852561] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 0.852569] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3
[ 0.852786] xhci_hcd 0000:00:10.0: irq 73 for MSI/MSI-X
[ 0.852797] xhci_hcd 0000:00:10.0: irq 74 for MSI/MSI-X
[ 0.852807] xhci_hcd 0000:00:10.0: irq 75 for MSI/MSI-X
[ 0.852816] xhci_hcd 0000:00:10.0: irq 76 for MSI/MSI-X
[ 0.852826] xhci_hcd 0000:00:10.0: irq 77 for MSI/MSI-X
[ 0.852936] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.852940] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.852943] usb usb3: Product: xHCI Host Controller
[ 0.852945] usb usb3: Manufacturer: Linux 3.11.0-13-generic xhci_hcd
[ 0.852948] usb usb3: SerialNumber: 0000:00:10.0
[ 0.853034] xHCI xhci_add_endpoint called for root hub
[ 0.853037] xHCI xhci_check_bandwidth called for root hub
[ 0.853068] hub 3-0:1.0: USB hub found
[ 0.853076] hub 3-0:1.0: 2 ports detected
[ 0.853165] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 0.853170] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 4
[ 0.856155] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.856158] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.856161] usb usb4: Product: xHCI Host Controller
[ 0.856164] usb usb4: Manufacturer: Linux 3.11.0-13-generic xhci_hcd
[ 0.856167] usb usb4: SerialNumber: 0000:00:10.0
[ 0.856261] xHCI xhci_add_endpoint called for root hub
[ 0.856264] xHCI xhci_check_bandwidth called for root hub
[ 0.856293] hub 4-0:1.0: USB hub found
[ 0.856301] hub 4-0:1.0: 2 ports detected
[ 0.864202] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.752267] tsc: Refined TSC clocksource calibration: 1996.384 MHz
[ 1.882266] i8042: No controller found
[ 1.882388] mousedev: PS/2 mouse device common for all mice
[ 1.882556] rtc_cmos 00:01: RTC can wake from S4
[ 1.882693] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 1.882719] rtc_cmos 00:01: alarms up to one day, 114 bytes nvram, hpet irqs
[ 1.882810] device-mapper: uevent: version 1.0.3
[ 1.882899] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
[ 1.882982] cpuidle: using governor ladder
[ 1.883079] cpuidle: using governor menu
[ 1.883095] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.883227] TCP: cubic registered
[ 1.883363] NET: Registered protocol family 10
[ 1.883652] NET: Registered protocol family 17
[ 1.883666] Key type dns_resolver registered
[ 1.884064] PM: Hibernation image not present or could not be loaded.
[ 1.884070] Loading module verification certificates
[ 1.885700] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: f27c94f79b8e017f1b6771433b38db3e1a5f77e1'
[ 1.885720] registered taskstats version 1
[ 1.889308] Key type trusted registered
[ 1.892154] Key type encrypted registered
[ 1.894947] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.895405] Magic number: 6:451:696
[ 1.895552] rtc_cmos 00:01: setting system clock to 2014-03-19 18:41:28 UTC (1395254488)
[ 1.895750] acpi-cpufreq: overriding BIOS provided _PSD data
[ 1.896003] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.896005] EDD information not available.
[ 1.898004] Freeing unused kernel memory: 1364K (ffffffff81d10000 - ffffffff81e65000)
[ 1.898009] Write protecting the kernel read-only data: 12288k
[ 1.902401] Freeing unused kernel memory: 1040K (ffff8800016fc000 - ffff880001800000)
[ 1.905670] Freeing unused kernel memory: 836K (ffff880001b2f000 - ffff880001c00000)
[ 1.921577] systemd-udevd[114]: starting version 204
[ 1.942943] r8168: module verification failed: signature and/or required key missing - tainting kernel
[ 1.943431] r8168 Gigabit Ethernet driver 8.038.00-NAPI loaded
[ 1.943611] r8168 0000:01:00.0: irq 78 for MSI/MSI-X
[ 1.948166] sdhci: Secure Digital Host Controller Interface driver
[ 1.948172] sdhci: Copyright(c) Pierre Ossman
[ 1.950515] sdhci-pci 0000:00:14.7: SDHCI controller found [1022:7813] (rev 1)
[ 1.950675] mmc0: no vqmmc regulator found
[ 1.950678] mmc0: no vmmc regulator found
[ 1.950798] mmc0: SDHCI controller on PCI [0000:00:14.7] using ADMA
[ 1.951247] ahci 0000:00:11.0: version 3.0
[ 1.951388] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 1.951394] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio deso sadm sds
[ 1.953298] scsi0 : ahci
[ 1.955125] scsi1 : ahci
[ 1.955205] ata1: SATA max UDMA/133 abar m1024@0xf0a6c000 port 0xf0a6c100 irq 19
[ 1.955209] ata2: SATA max UDMA/133 abar m1024@0xf0a6c000 port 0xf0a6c180 irq 19
[ 1.968626] eth%d: 0xffffc9000074e000, 00:00:1a:1b:34:2c, IRQ 78
[ 1.969743] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.
[ 1.969755] r8168 Copyright (C) 2013 Realtek NIC software team <nicfae@realtek.com>
[ 1.969755] This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>.
[ 1.969755] This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>.
[ 2.272377] ata1: SATA link down (SStatus 0 SControl 300)
[ 2.444371] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.445543] ata2.00: ATA-8: ST3750525AS, JC45, max UDMA/133
[ 2.445547] ata2.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 2.446921] ata2.00: configured for UDMA/133
[ 2.447124] scsi 1:0:0:0: Direct-Access ATA ST3750525AS JC45 PQ: 0 ANSI: 5
[ 2.447343] sd 1:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
[ 2.447388] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 2.447494] sd 1:0:0:0: [sda] Write Protect is off
[ 2.447499] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.447559] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.480371] sda: sda1 sda2 sda3 < sda5 sda6 > sda4
[ 2.481147] sd 1:0:0:0: [sda] Attached SCSI disk
[ 2.752500] Switched to clocksource tsc
[ 3.388043] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 9.365728] Adding 1757180k swap on /dev/sda6. Priority:-1 extents:1 across:1757180k FS
[ 9.397803] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 9.471425] systemd-udevd[285]: starting version 204
[ 9.538948] lp: driver loaded but no devices found
[ 9.568139] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[ 9.568146] AMD IOMMUv2 functionality not available on this system
[ 9.580119] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 9.580127] Disabling lock debugging due to kernel taint
[ 9.585520] ohci-pci: OHCI PCI platform driver
[ 9.585801] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 9.585821] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 5
[ 9.585893] ohci-pci 0000:00:12.0: irq 18, io mem 0xf0a6a000
[ 9.607524] <6>[fglrx] Maximum main memory to use for locked dma buffers: 3093 MBytes.
[ 9.607547] <6>[fglrx] vendor: 1002 device: 9830 count: 1
[ 9.609030] <6>[fglrx] ioport: bar 4, base 0x2000, size: 0x100
[ 9.614475] <6>[fglrx] Kernel PAT support is enabled
[ 9.614510] <6>[fglrx] module loaded - fglrx 13.30.1 [Nov 12 2013] with 1 minors
[ 9.625179] MCE: In-kernel MCE decoding enabled.
[ 9.632806] microcode: CPU0: patch_level=0x0700010b
[ 9.645414] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 9.645422] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.645425] usb usb5: Product: OHCI PCI host controller
[ 9.645429] usb usb5: Manufacturer: Linux 3.11.0-13-generic ohci_hcd
[ 9.645432] usb usb5: SerialNumber: 0000:00:12.0
[ 9.645613] hub 5-0:1.0: USB hub found
[ 9.645624] hub 5-0:1.0: 4 ports detected
[ 9.645805] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 9.646989] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 9.647004] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 6
[ 9.647031] ohci-pci 0000:00:13.0: irq 18, io mem 0xf0a6b000
[ 9.705426] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 9.705435] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.705439] usb usb6: Product: OHCI PCI host controller
[ 9.705442] usb usb6: Manufacturer: Linux 3.11.0-13-generic ohci_hcd
[ 9.705445] usb usb6: SerialNumber: 0000:00:13.0
[ 9.705648] hub 6-0:1.0: USB hub found
[ 9.705659] hub 6-0:1.0: 4 ports detected
[ 9.706113] hda-intel 0000:00:01.1: Using LPIB position fix
[ 9.706160] snd_hda_intel 0000:00:01.1: irq 79 for MSI/MSI-X
[ 9.707037] EDAC MC: Ver: 3.0.0
[ 9.708533] hda-intel 0000:00:01.1: Enable sync_write for stable communication
[ 9.714272] input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/sound/card0/input2
[ 9.714401] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input3
[ 9.714832] hda-intel 0000:00:14.2: Using LPIB position fix
[ 9.714880] snd_hda_intel 0000:00:14.2: irq 80 for MSI/MSI-X
[ 9.719301] hda-intel 0000:00:14.2: Enable sync_write for stable communication
[ 9.719850] AMD64 EDAC driver v3.4.0
[ 9.728899] SKU: Nid=0x1d sku_cfg=0x40130605
[ 9.728907] SKU: port_connectivity=0x1
[ 9.728909] SKU: enable_pcbeep=0x1
[ 9.728911] SKU: check_sum=0x00000003
[ 9.728913] SKU: customization=0x00000006
[ 9.728915] SKU: external_amp=0x0
[ 9.728916] SKU: platform_type=0x1
[ 9.728918] SKU: swap=0x0
[ 9.728919] SKU: override=0x1
[ 9.729118] autoconfig: line_outs=1 (0x21/0x0/0x0/0x0/0x0) type:hp
[ 9.729120] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 9.729123] hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 9.729124] mono: mono_out=0x0
[ 9.729126] dig-out=0x1e/0x0
[ 9.729127] inputs:
[ 9.729133] Mic=0x18
[ 9.729135] Line=0x1a
[ 9.729137] realtek: No valid SSID, checking pincfg 0x40130605 for NID 0x1d
[ 9.729139] realtek: Enabling init ASM_ID=0x0605 CODEC_ID=10ec0272
[ 9.739419] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input4
[ 9.739545] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input5
[ 9.739648] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input6
[ 9.740081] EDAC amd64: DRAM ECC enabled.
[ 9.740094] EDAC amd64: F16h detected (node 0).
[ 9.740130] EDAC MC: DCT0 chip selects:
[ 9.740133] EDAC amd64: MC: 0: 0MB 1: 0MB
[ 9.740136] EDAC amd64: MC: 2: 2048MB 3: 2048MB
[ 9.740138] EDAC amd64: MC: 4: 0MB 5: 0MB
[ 9.740140] EDAC amd64: MC: 6: 0MB 7: 0MB
[ 9.740142] EDAC MC: DCT1 chip selects:
[ 9.740144] EDAC amd64: MC: 0: 0MB 1: 0MB
[ 9.740146] EDAC amd64: MC: 2: 0MB 3: 0MB
[ 9.740148] EDAC amd64: MC: 4: 0MB 5: 0MB
[ 9.740150] EDAC amd64: MC: 6: 0MB 7: 0MB
[ 9.740152] EDAC amd64: using x4 syndromes.
[ 9.740154] EDAC amd64: MCT channel count: 1
[ 9.740198] EDAC amd64: CS2: Unbuffered DDR3 RAM
[ 9.740201] EDAC amd64: CS3: Unbuffered DDR3 RAM
[ 9.740352] EDAC MC0: Giving out device to 'amd64_edac' 'F16h': DEV 0000:00:18.2
[ 9.740392] EDAC PCI0: Giving out device to module 'amd64_edac' controller 'EDAC PCI controller': DEV '0000:00:18.2' (POLLED)
[ 9.767428] type=1400 audit(1395268896.365:2): apparmor="STATUS" operation="profile_load" parent=325 profile="unconfined" name="/sbin/dhclient" pid=355 comm="apparmor_parser"
[ 9.767441] type=1400 audit(1395268896.365:3): apparmor="STATUS" operation="profile_load" parent=325 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=355 comm="apparmor_parser"
[ 9.767450] type=1400 audit(1395268896.365:4): apparmor="STATUS" operation="profile_load" parent=325 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=355 comm="apparmor_parser"
[ 9.768371] type=1400 audit(1395268896.365:5): apparmor="STATUS" operation="profile_replace" parent=325 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=355 comm="apparmor_parser"
[ 9.768384] type=1400 audit(1395268896.365:6): apparmor="STATUS" operation="profile_replace" parent=325 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=355 comm="apparmor_parser"
[ 9.768928] type=1400 audit(1395268896.365:7): apparmor="STATUS" operation="profile_replace" parent=325 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=355 comm="apparmor_parser"
[ 9.869210] microcode: failed to load file amd-ucode/microcode_amd_fam16h.bin
[ 9.869236] microcode: CPU1: patch_level=0x0700010b
[ 9.869249] microcode: CPU2: patch_level=0x0700010b
[ 9.869258] microcode: CPU3: patch_level=0x0700010b
[ 9.869461] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 9.944424] kvm: Nested Virtualization enabled
[ 9.944433] kvm: Nested Paging enabled
[ 10.213458] usb 5-3: new full-speed USB device number 2 using ohci-pci
[ 10.386538] usb 5-3: New USB device found, idVendor=046d, idProduct=c52e
[ 10.386542] usb 5-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 10.386546] usb 5-3: Product: USB Receiver
[ 10.386550] usb 5-3: Manufacturer: Logitech
[ 10.503631] hidraw: raw HID events driver (C) Jiri Kosina
[ 10.514623] usbcore: registered new interface driver usbhid
[ 10.514629] usbhid: USB HID core driver
[ 10.518272] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb5/5-3/5-3:1.0/input/input7
[ 10.518988] hid-generic 0003:046D:C52E.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:12.0-3/input0
[ 10.519546] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb5/5-3/5-3:1.1/input/input8
[ 10.519818] hid-generic 0003:046D:C52E.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:12.0-3/input1
[ 10.803391] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[ 11.179051] init: failsafe main process (564) killed by TERM signal
[ 11.501265] Bluetooth: Core ver 2.16
[ 11.501301] NET: Registered protocol family 31
[ 11.501304] Bluetooth: HCI device and connection manager initialized
[ 11.501319] Bluetooth: HCI socket layer initialized
[ 11.501323] Bluetooth: L2CAP socket layer initialized
[ 11.501332] Bluetooth: SCO socket layer initialized
[ 11.506485] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 11.506492] Bluetooth: BNEP filters: protocol multicast
[ 11.506506] Bluetooth: BNEP socket layer initialized
[ 11.508058] Bluetooth: RFCOMM TTY layer initialized
[ 11.508080] Bluetooth: RFCOMM socket layer initialized
[ 11.508083] Bluetooth: RFCOMM ver 1.11
[ 11.667194] type=1400 audit(1395268898.265:8): apparmor="STATUS" operation="profile_load" parent=664 profile="unconfined" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=669 comm="apparmor_parser"
[ 11.667210] type=1400 audit(1395268898.265:9): apparmor="STATUS" operation="profile_load" parent=664 profile="unconfined" name="chromium_browser" pid=669 comm="apparmor_parser"
[ 11.667250] type=1400 audit(1395268898.265:10): apparmor="STATUS" operation="profile_load" parent=664 profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=670 comm="apparmor_parser"
[ 11.667261] type=1400 audit(1395268898.265:11): apparmor="STATUS" operation="profile_load" parent=664 profile="unconfined" name="chromium_browser" pid=670 comm="apparmor_parser"
[ 11.756401] init: avahi-cups-reload main process (680) terminated with status 1
[ 11.777508] ppdev: user-space parallel port driver
[ 12.605128] IPv6: ADDRCONF(NETDEV_UP): eth7: link is not ready
[ 12.605585] IPv6: ADDRCONF(NETDEV_UP): eth7: link is not ready
[ 12.960854] init: plymouth-stop pre-start process (1014) terminated with status 1
[ 13.046737] vesafb: mode is 1920x1200x32, linelength=7680, pages=0
[ 13.046745] vesafb: scrolling: redraw
[ 13.046749] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 13.047696] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90001200000, using 9024k, total 9024k
[ 13.048274] Console: switching to colour frame buffer device 240x75
[ 13.059647] fb0: VESA VGA frame buffer device
[ 13.119925] init: plymouth-splash main process (1041) terminated with status 1
[ 13.691184] fglrx_pci 0000:00:01.0: irq 81 for MSI/MSI-X
[ 13.692813] <6>[fglrx] Firegl kernel thread PID: 1051
[ 13.692950] <6>[fglrx] Firegl kernel thread PID: 1052
[ 13.693080] <6>[fglrx] Firegl kernel thread PID: 1053
[ 13.693254] <6>[fglrx] IRQ 81 Enabled
[ 13.704105] <6>[fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 13.704109] <6>[fglrx] Reserved FB block: Unshared offset:fc69000, size:3000
[ 13.704112] <6>[fglrx] Reserved FB block: Unshared offset:fc6c000, size:394000
[ 13.704115] <6>[fglrx] Reserved FB block: Unshared offset:1ffc8000, size:38000
[ 151.621891] r8168: eth7: link up
[ 151.621961] IPv6: ADDRCONF(NETDEV_CHANGE): eth7: link becomes ready