| [ 0.000000] Initializing cgroup subsys cpuset |
| [ 0.000000] Initializing cgroup subsys cpu |
| [ 0.000000] Initializing cgroup subsys cpuacct |
| [ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt9-2 (2015-04-13) |
| [ 0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt-i386 rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt-i386 |
| [ 0.000000] e820: BIOS-provided physical RAM map: |
| [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff99fff] usable |
| [ 0.000000] BIOS-e820: [mem 0x00000000bff9a000-0x00000000cfffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable |
| [ 0.000000] NX (Execute Disable) protection: active |
| [ 0.000000] SMBIOS 2.7 present. |
| [ 0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS RAPTOR-NORMAL 05/06/2017 |
| [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable |
| [ 0.000000] AGP: No AGP bridge found |
| [ 0.000000] e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000 |
| [ 0.000000] MTRR default type: uncachable |
| [ 0.000000] MTRR fixed ranges enabled: |
| [ 0.000000] 00000-9FFFF write-back |
| [ 0.000000] A0000-BFFFF uncachable |
| [ 0.000000] C0000-FFFFF write-back |
| [ 0.000000] MTRR variable ranges enabled: |
| [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back |
| [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back |
| [ 0.000000] 2 base 0000F8000000 mask FFFFFC000000 write-combining |
| [ 0.000000] 3 disabled |
| [ 0.000000] 4 disabled |
| [ 0.000000] 5 disabled |
| [ 0.000000] 6 disabled |
| [ 0.000000] 7 disabled |
| [ 0.000000] TOM2: 0000000180000000 aka 6144M |
| [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 |
| [ 0.000000] e820: last_pfn = 0xbff9a max_arch_pfn = 0x400000000 |
| [ 0.000000] found SMP MP-table at [mem 0x000f0600-0x000f060f] mapped at [ffff8800000f0600] |
| [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 |
| [ 0.000000] Using GB pages for direct mapping |
| [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] |
| [ 0.000000] [mem 0x00000000-0x000fffff] page 4k |
| [ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE |
| [ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE |
| [ 0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE |
| [ 0.000000] init_memory_mapping: [mem 0x17fe00000-0x17fffffff] |
| [ 0.000000] [mem 0x17fe00000-0x17fffffff] page 1G |
| [ 0.000000] init_memory_mapping: [mem 0x17c000000-0x17fdfffff] |
| [ 0.000000] [mem 0x17c000000-0x17fdfffff] page 1G |
| [ 0.000000] init_memory_mapping: [mem 0x100000000-0x17bffffff] |
| [ 0.000000] [mem 0x100000000-0x17bffffff] page 1G |
| [ 0.000000] init_memory_mapping: [mem 0x00100000-0xbff99fff] |
| [ 0.000000] [mem 0x00100000-0x001fffff] page 4k |
| [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M |
| [ 0.000000] [mem 0x40000000-0x7fffffff] page 1G |
| [ 0.000000] [mem 0x80000000-0xbfdfffff] page 2M |
| [ 0.000000] [mem 0xbfe00000-0xbff99fff] page 4k |
| [ 0.000000] RAMDISK: [mem 0x7f24c000-0x7fffefff] |
| [ 0.000000] ACPI: Early table checksum verification disabled |
| [ 0.000000] ACPI: RSDP 0x00000000000F07D0 000024 (v02 CORE ) |
| [ 0.000000] ACPI: XSDT 0x00000000BFFAB0E0 00006C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: FACP 0x00000000BFFAD910 000074 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: DSDT 0x00000000BFFAB280 002687 (v02 ASUS COREBOOT 00000001 INTL 20160831) |
| [ 0.000000] ACPI: FACS 0x00000000BFFAB240 000040 |
| [ 0.000000] ACPI: SSDT 0x00000000BFFADA10 000EEA (v02 CORE COREBOOT 0000002A CORE 0000002A) |
| [ 0.000000] ACPI: TCPA 0x00000000BFFAE900 000032 (v02 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: APIC 0x00000000BFFAE940 0000C6 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SRAT 0x00000000BFFAEA10 000150 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SLIT 0x00000000BFFAEB60 000030 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: HPET 0x00000000BFFAEB90 000038 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SRAT 0x00000000BFFAEBD0 000150 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SLIT 0x00000000BFFAED20 000030 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0 |
| [ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0 |
| [ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0 |
| [ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0 |
| [ 0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1 |
| [ 0.000000] SRAT: PXM 1 -> APIC 0x05 -> Node 1 |
| [ 0.000000] SRAT: PXM 1 -> APIC 0x06 -> Node 1 |
| [ 0.000000] SRAT: PXM 1 -> APIC 0x07 -> Node 1 |
| [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff] |
| [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff] |
| [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x13fffffff] |
| [ 0.000000] SRAT: Node 1 PXM 1 [mem 0x140000000-0x17fffffff] |
| [ 0.000000] NUMA: Initialized distance table, cnt=2 |
| [ 0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xbfffffff] -> [mem 0x00000000-0xbfffffff] |
| [ 0.000000] NUMA: Node 0 [mem 0x00000000-0xbfffffff] + [mem 0x100000000-0x13fffffff] -> [mem 0x00000000-0x13fffffff] |
| [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff] |
| [ 0.000000] NODE_DATA [mem 0x13fffb000-0x13fffffff] |
| [ 0.000000] Initmem setup node 1 [mem 0x140000000-0x17fffffff] |
| [ 0.000000] NODE_DATA [mem 0x17fff8000-0x17fffcfff] |
| [ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013be00000-ffff88013f5fffff] on node 0 |
| [ 0.000000] [ffffea0004600000-ffffea00053fffff] PMD -> [ffff88017e600000-ffff88017f3fffff] on node 1 |
| [ 0.000000] Zone ranges: |
| [ 0.000000] DMA [mem 0x00001000-0x00ffffff] |
| [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] |
| [ 0.000000] Normal [mem 0x100000000-0x17fffffff] |
| [ 0.000000] Movable zone start for each node |
| [ 0.000000] Early memory node ranges |
| [ 0.000000] node 0: [mem 0x00001000-0x0009efff] |
| [ 0.000000] node 0: [mem 0x00100000-0xbff99fff] |
| [ 0.000000] node 0: [mem 0x100000000-0x13fffffff] |
| [ 0.000000] node 1: [mem 0x140000000-0x17fffffff] |
| [ 0.000000] On node 0 totalpages: 1048376 |
| [ 0.000000] DMA zone: 56 pages used for memmap |
| [ 0.000000] DMA zone: 21 pages reserved |
| [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 |
| [ 0.000000] DMA32 zone: 10695 pages used for memmap |
| [ 0.000000] DMA32 zone: 782234 pages, LIFO batch:31 |
| [ 0.000000] Normal zone: 3584 pages used for memmap |
| [ 0.000000] Normal zone: 262144 pages, LIFO batch:31 |
| [ 0.000000] On node 1 totalpages: 262144 |
| [ 0.000000] Normal zone: 3584 pages used for memmap |
| [ 0.000000] Normal zone: 262144 pages, LIFO batch:31 |
| [ 0.000000] ACPI: PM-Timer IO Port: 0x2008 |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) |
| [ 0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0]) |
| [ 0.000000] IOAPIC[0]: apic_id 24, version 17, address 0xfec00000, GSI 0-23 |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) |
| [ 0.000000] ACPI: IRQ9 used by override. |
| [ 0.000000] ACPI: IRQ14 used by override. |
| [ 0.000000] ACPI: IRQ15 used by override. |
| [ 0.000000] Using ACPI (MADT) for SMP configuration information |
| [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 |
| [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs |
| [ 0.000000] nr_irqs_gsi: 40 |
| [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xbff9a000-0xcfffffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xffffffff] |
| [ 0.000000] e820: [mem 0xd0000000-0xffffffff] available for PCI devices |
| [ 0.000000] Booting paravirtualized kernel on bare hardware |
| [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:2 |
| [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s80896 r8192 d21504 u524288 |
| [ 0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152 |
| [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [1] 4 5 6 7 |
| [ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 1292580 |
| [ 0.000000] Policy zone: Normal |
| [ 0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt-i386 rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt-i386 |
| [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) |
| [ 0.000000] AGP: Checking aperture... |
| [ 0.000000] AGP: No AGP bridge found |
| [ 0.000000] AGP: Node 0: aperture [bus addr 0xf5fa000000-0xf5fbffffff] (32MB) |
| [ 0.000000] Aperture beyond 4GB. Ignoring. |
| [ 0.000000] AGP: Your BIOS doesn't leave a aperture memory hole |
| [ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup |
| [ 0.000000] AGP: This costs you 64MB of RAM |
| [ 0.000000] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB) |
| [ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff] |
| [ 0.000000] Memory: 5012208K/5242080K available (5207K kernel code, 946K rwdata, 1832K rodata, 1204K init, 840K bss, 229872K reserved) |
| [ 0.000000] Hierarchical RCU implementation. |
| [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. |
| [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8. |
| [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 |
| [ 0.000000] NR_IRQS:33024 nr_irqs:744 16 |
| [ 0.000000] spurious 8259A interrupt: IRQ7. |
| [ 0.000000] Console: colour *CGA 80x25 |
| [ 0.000000] console [ttyS0] enabled |
| [ 0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl |
| [ 0.000000] hpet clockevent registered |
| [ 0.000000] tsc: Fast TSC calibration using PIT |
| [ 0.000000] tsc: Detected 1909.652 MHz processor |
| [ 0.000151] Calibrating delay loop (skipped), value calculated using timer frequency.. 3819.30 BogoMIPS (lpj=7638608) |
| [ 0.010786] pid_max: default: 32768 minimum: 301 |
| [ 0.015432] ACPI: Core revision 20140424 |
| [ 0.021781] ACPI: All ACPI Tables successfully acquired |
| [ 0.027144] Security Framework initialized |
| [ 0.031271] AppArmor: AppArmor disabled by boot time parameter |
| [ 0.037115] Yama: disabled by default; enable with sysctl kernel.yama.* |
| [ 0.044825] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) |
| [ 0.057877] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) |
| [ 0.067591] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) |
| [ 0.074493] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) |
| [ 0.082322] Initializing cgroup subsys memory |
| [ 0.086701] Initializing cgroup subsys devices |
| [ 0.091167] Initializing cgroup subsys freezer |
| [ 0.095624] Initializing cgroup subsys net_cls |
| [ 0.100083] Initializing cgroup subsys blkio |
| [ 0.104367] Initializing cgroup subsys perf_event |
| [ 0.109080] Initializing cgroup subsys net_prio |
| [ 0.113655] tseg: 0000000000 |
| [ 0.113666] CPU: Physical Processor ID: 0 |
| [ 0.117688] CPU: Processor Core ID: 0 |
| [ 0.121369] mce: CPU supports 6 MCE banks |
| [ 0.125405] LVT offset 0 assigned for vector 0xf9 |
| [ 0.130135] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8 |
| Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0 |
| tlb_flushall_shift: 6 |
| [ 0.145483] Freeing SMP alternatives memory: 20K (ffffffff81a1b000 - ffffffff81a20000) |
| [ 0.154487] ftrace: allocating 21614 entries in 85 pages |
| [ 0.169789] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0 |
| [ 0.215307] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 8347 (fam: 10, model: 02, stepping: 01) |
| [ 0.332519] Performance Events: AMD PMU driver. |
| [ 0.337089] ... version: 0 |
| [ 0.341101] ... bit width: 48 |
| [ 0.345203] ... generic registers: 4 |
| [ 0.349219] ... value mask: 0000ffffffffffff |
| [ 0.354531] ... max period: 00007fffffffffff |
| [ 0.359840] ... fixed-purpose events: 0 |
| [ 0.363869] ... event mask: 000000000000000f |
| [ 0.371709] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. |
| [ 0.379914] x86: Booting SMP configuration: |
| [ 0.384102] .... node #0, CPUs: #1 #2 #3 |
| [ 0.428458] .... node #1, CPUs: #4 #5 #6 #7 |
| [ 0.581197] x86: Booted up 2 nodes, 8 CPUs |
| [ 0.585498] smpboot: Total of 8 processors activated (30556.39 BogoMIPS) |
| [ 0.597964] devtmpfs: initialized |
| [ 0.609288] pinctrl core: initialized pinctrl subsystem |
| [ 0.614687] NET: Registered protocol family 16 |
| [ 0.619357] cpuidle: using governor ladder |
| [ 0.623464] cpuidle: using governor menu |
| [ 0.627402] node 0 link 1: io port [1000, 3fff] |
| [ 0.627405] TOM: 00000000c0000000 aka 3072M |
| [ 0.631598] Fam 10h mmconf [mem 0xc0000000-0xcfffffff] |
| [ 0.631602] node 0 link 1: mmio [fc000000, fc3fffff] |
| [ 0.631605] node 0 link 1: mmio [f8000000, fbffffff] |
| [ 0.631607] TOM2: 0000000180000000 aka 6144M |
| [ 0.635885] bus: [bus 00-05] on node 0 link 1 |
| [ 0.635886] bus: 00 [io 0x0000-0xffff] |
| [ 0.635888] bus: 00 [mem 0xd0000000-0xffffffff] |
| [ 0.635890] bus: 00 [mem 0x180000000-0xfcffffffff] |
| [ 0.635995] ACPI: bus type PCI registered |
| [ 0.640011] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 |
| [ 0.646619] PCI: Using configuration type 1 for base access |
| [ 0.652199] PCI: Using configuration type 1 for extended access |
| [ 0.669375] ACPI: Added _OSI(Module Device) |
| [ 0.673567] ACPI: Added _OSI(Processor Device) |
| [ 0.678018] ACPI: Added _OSI(3.0 _SCP Extensions) |
| [ 0.682730] ACPI: Added _OSI(Processor Aggregator Device) |
| [ 0.689203] ACPI: Executed 1 blocks of module-level executable AML code |
| [ 0.698376] ACPI: Interpreter enabled |
| [ 0.702061] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580) |
| [ 0.711326] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580) |
| [ 0.720608] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580) |
| [ 0.729881] ACPI: (supports S0 S1 S5) |
| [ 0.733550] ACPI: Using IOAPIC for interrupt routing |
| [ 0.738557] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| [ 0.766971] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05]) |
| [ 0.773158] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] |
| [ 0.781371] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] |
| [ 0.821028] acpi PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x03b0-0x03df] ignored |
| [ 0.831041] PCI host bridge to bus 0000:00 |
| [ 0.835142] pci_bus 0000:00: root bus resource [bus 00-05] |
| [ 0.840634] pci_bus 0000:00: root bus resource [io 0x0d00-0x3fff] |
| [ 0.846820] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] |
| [ 0.853697] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff] |
| [ 0.860569] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc3fffff] |
| [ 0.867446] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] |
| [ 0.873637] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000 |
| [ 0.873838] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100 |
| [ 0.873846] pci 0000:00:01.0: reg 0x10: [io 0x2c00-0x2c7f] |
| [ 0.873977] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500 |
| [ 0.873985] pci 0000:00:01.1: reg 0x10: [io 0x3000-0x301f] |
| [ 0.874000] pci 0000:00:01.1: reg 0x20: [io 0x2c80-0x2cbf] |
| [ 0.874005] pci 0000:00:01.1: reg 0x24: [io 0x2cc0-0x2cff] |
| [ 0.874024] pci 0000:00:01.1: PME# supported from D3hot D3cold |
| [ 0.874141] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310 |
| [ 0.874149] pci 0000:00:02.0: reg 0x10: [mem 0xfc300000-0xfc300fff] |
| [ 0.874199] pci 0000:00:02.0: supports D1 D2 |
| [ 0.874209] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.874253] pci 0000:00:02.0: System wakeup disabled by ACPI |
| [ 0.879976] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320 |
| [ 0.879991] pci 0000:00:02.1: reg 0x10: [mem 0xfc303000-0xfc3030ff] |
| [ 0.880056] pci 0000:00:02.1: supports D1 D2 |
| [ 0.880066] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.880109] pci 0000:00:02.1: System wakeup disabled by ACPI |
| [ 0.885835] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a |
| [ 0.885870] pci 0000:00:06.0: reg 0x20: [io 0x3020-0x302f] |
| [ 0.885890] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] |
| [ 0.893023] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io 0x03f6] |
| [ 0.899554] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] |
| [ 0.906684] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io 0x0376] |
| [ 0.913345] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185 |
| [ 0.913356] pci 0000:00:07.0: reg 0x10: [io 0x3050-0x3057] |
| [ 0.913361] pci 0000:00:07.0: reg 0x14: [io 0x3070-0x3073] |
| [ 0.913365] pci 0000:00:07.0: reg 0x18: [io 0x3058-0x305f] |
| [ 0.913370] pci 0000:00:07.0: reg 0x1c: [io 0x3074-0x3077] |
| [ 0.913374] pci 0000:00:07.0: reg 0x20: [io 0x3030-0x303f] |
| [ 0.913379] pci 0000:00:07.0: reg 0x24: [mem 0xfc301000-0xfc301fff] |
| [ 0.913576] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185 |
| [ 0.913590] pci 0000:00:08.0: reg 0x10: [io 0x3060-0x3067] |
| [ 0.913595] pci 0000:00:08.0: reg 0x14: [io 0x3078-0x307b] |
| [ 0.913599] pci 0000:00:08.0: reg 0x18: [io 0x3068-0x306f] |
| [ 0.913604] pci 0000:00:08.0: reg 0x1c: [io 0x307c-0x307f] |
| [ 0.913608] pci 0000:00:08.0: reg 0x20: [io 0x3040-0x304f] |
| [ 0.913613] pci 0000:00:08.0: reg 0x24: [mem 0xfc302000-0xfc302fff] |
| [ 0.913727] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400 |
| [ 0.913798] pci 0000:00:09.0: System wakeup disabled by ACPI |
| [ 0.919529] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400 |
| [ 0.919573] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.919624] pci 0000:00:0b.0: System wakeup disabled by ACPI |
| [ 0.925343] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400 |
| [ 0.925413] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.925471] pci 0000:00:0c.0: System wakeup disabled by ACPI |
| [ 0.931195] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400 |
| [ 0.931256] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.931359] pci 0000:00:0d.0: System wakeup disabled by ACPI |
| [ 0.937085] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400 |
| [ 0.937136] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.937182] pci 0000:00:0e.0: System wakeup disabled by ACPI |
| [ 0.942921] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000 |
| [ 0.943077] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000 |
| [ 0.943205] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000 |
| [ 0.943322] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000 |
| [ 0.943455] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000 |
| [ 0.943597] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000 |
| [ 0.943721] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000 |
| [ 0.943837] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000 |
| [ 0.943945] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000 |
| [ 0.944107] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000 |
| [ 0.944318] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000 |
| [ 0.944347] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref] |
| [ 0.944354] pci 0000:01:04.0: reg 0x14: [mem 0xfc000000-0xfc03ffff] |
| [ 0.944363] pci 0000:01:04.0: reg 0x18: [io 0x1000-0x107f] |
| [ 0.944398] pci 0000:01:04.0: supports D1 D2 |
| [ 0.944483] pci 0000:00:09.0: PCI bridge to [bus 01] |
| [ 0.949459] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff] |
| [ 0.949463] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff] |
| [ 0.949466] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref] |
| [ 0.949544] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000 |
| [ 0.949606] pci 0000:02:00.0: reg 0x10: [mem 0xfc100000-0xfc10ffff 64bit] |
| [ 0.949641] pci 0000:02:00.0: reg 0x30: [mem 0x68400000-0x6840ffff pref] |
| [ 0.949747] pci 0000:02:00.0: PME# supported from D3hot D3cold |
| [ 0.949894] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' |
| [ 0.959894] pci 0000:00:0b.0: PCI bridge to [bus 02] |
| [ 0.964863] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff] |
| [ 0.964952] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000 |
| [ 0.964987] pci 0000:03:00.0: reg 0x10: [mem 0xfc200000-0xfc20ffff 64bit] |
| [ 0.965096] pci 0000:03:00.0: PME# supported from D3hot D3cold |
| [ 0.965189] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' |
| [ 0.975185] pci 0000:00:0c.0: PCI bridge to [bus 03] |
| [ 0.980155] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff] |
| [ 0.980229] pci 0000:00:0d.0: PCI bridge to [bus 04] |
| [ 0.985286] pci 0000:00:0e.0: PCI bridge to [bus 05] |
| [ 0.990271] pci_bus 0000:00: on NUMA node 0 |
| [ 0.990377] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19) |
| [ 0.996519] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19) |
| [ 1.002676] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled. |
| [ 1.009983] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled. |
| [ 1.017279] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled. |
| [ 1.024572] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.031869] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23) |
| [ 1.037995] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23) |
| [ 1.044129] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.051412] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.058723] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.066020] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23) |
| [ 1.072156] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23) |
| [ 1.078289] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.085579] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.092872] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.100163] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. |
| [ 1.108689] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled. |
| [ 1.115141] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled. |
| [ 1.121594] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled. |
| [ 1.128054] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled. |
| [ 1.134839] ACPI: Enabled 1 GPEs in block 00 to 1F |
| [ 1.139961] vgaarb: setting as boot device: PCI:0000:01:04.0 |
| [ 1.145628] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none |
| [ 1.153716] vgaarb: loaded |
| [ 1.156433] vgaarb: bridge control possible 0000:01:04.0 |
| [ 1.161916] PCI: Using ACPI for IRQ routing |
| [ 1.166105] PCI: pci_cache_line_size set to 64 bytes |
| [ 1.166161] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] |
| [ 1.166165] e820: reserve RAM buffer [mem 0xbff9a000-0xbfffffff] |
| [ 1.166473] HPET: 3 timers in total, 0 timers will be used for per-cpu timer |
| [ 1.173530] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 |
| [ 1.178602] hpet0: 3 comparators, 32-bit 25.000000 MHz counter |
| [ 1.187277] Switched to clocksource hpet |
| [ 1.202898] pnp: PnP ACPI init |
| [ 1.206003] ACPI: bus type PNP registered |
| [ 1.210527] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) |
| [ 1.210613] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active) |
| [ 1.210694] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active) |
| [ 1.210791] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active) |
| [ 1.210827] pnp 00:04: [dma 2] |
| [ 1.210876] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active) |
| [ 1.210907] pnp: PnP ACPI: found 5 devices |
| [ 1.215013] ACPI: bus type PNP unregistered |
| [ 1.227028] pci 0000:02:00.0: can't claim BAR 6 [mem 0x68400000-0x6840ffff pref]: no compatible bridge window |
| [ 1.236982] pci 0000:00:09.0: PCI bridge to [bus 01] |
| [ 1.241956] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff] |
| [ 1.248058] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff] |
| [ 1.254848] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref] |
| [ 1.262082] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc110000-0xfc11ffff pref] |
| [ 1.269309] pci 0000:00:0b.0: PCI bridge to [bus 02] |
| [ 1.274278] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff] |
| [ 1.281073] pci 0000:00:0c.0: PCI bridge to [bus 03] |
| [ 1.286046] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff] |
| [ 1.292839] pci 0000:00:0d.0: PCI bridge to [bus 04] |
| [ 1.297815] pci 0000:00:0e.0: PCI bridge to [bus 05] |
| [ 1.302796] pci_bus 0000:00: resource 4 [io 0x0d00-0x3fff] |
| [ 1.302799] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff] |
| [ 1.302801] pci_bus 0000:00: resource 6 [mem 0xf8000000-0xfbffffff] |
| [ 1.302804] pci_bus 0000:00: resource 7 [mem 0xfc000000-0xfc3fffff] |
| [ 1.302806] pci_bus 0000:00: resource 8 [io 0x0000-0x0cf7] |
| [ 1.302810] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] |
| [ 1.302812] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff] |
| [ 1.302815] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref] |
| [ 1.302818] pci_bus 0000:02: resource 1 [mem 0xfc100000-0xfc1fffff] |
| [ 1.302821] pci_bus 0000:03: resource 1 [mem 0xfc200000-0xfc2fffff] |
| [ 1.302970] NET: Registered protocol family 2 |
| [ 1.307877] TCP established hash table entries: 65536 (order: 7, 524288 bytes) |
| [ 1.315569] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) |
| [ 1.322918] TCP: Hash tables configured (established 65536 bind 65536) |
| [ 1.329524] TCP: reno registered |
| [ 1.332785] UDP hash table entries: 4096 (order: 5, 131072 bytes) |
| [ 1.338993] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) |
| [ 1.345789] NET: Registered protocol family 1 |
| [ 1.350528] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23 |
| [ 1.356608] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22 |
| [ 1.362523] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.368047] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.373571] pci 0000:00:0b.0: Found disabled HT MSI Mapping |
| [ 1.379159] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.384707] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.390224] pci 0000:00:0c.0: Found disabled HT MSI Mapping |
| [ 1.395810] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.401375] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.406893] pci 0000:00:0d.0: Found disabled HT MSI Mapping |
| [ 1.412485] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.418028] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.423550] pci 0000:00:0e.0: Found disabled HT MSI Mapping |
| [ 1.429129] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.434650] pci 0000:01:04.0: Video device with shadowed ROM |
| [ 1.434659] PCI: CLS 64 bytes, default 64 |
| [ 1.434769] Unpacking initramfs... |
| [ 1.817874] Freeing initrd memory: 14028K (ffff88007f24c000 - ffff88007ffff000) |
| [ 1.825805] PCI-DMA: Disabling AGP. |
| [ 1.829475] PCI-DMA: aperture base @ b4000000 size 65536 KB |
| [ 1.835058] PCI-DMA: using GART IOMMU. |
| [ 1.838821] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture |
| [ 1.850735] platform rtc_cmos: registered platform RTC device (no PNP device found) |
| [ 1.858894] microcode: CPU0: patch_level=0x01000084 |
| [ 1.863785] microcode: CPU1: patch_level=0x01000084 |
| [ 1.868678] microcode: CPU2: patch_level=0x01000084 |
| [ 1.873582] microcode: CPU3: patch_level=0x01000084 |
| [ 1.878488] microcode: CPU4: patch_level=0x01000084 |
| [ 1.883384] microcode: CPU5: patch_level=0x01000084 |
| [ 1.888278] microcode: CPU6: patch_level=0x01000084 |
| [ 1.893176] microcode: CPU7: patch_level=0x01000084 |
| [ 1.898167] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba |
| [ 1.906965] LVT offset 1 assigned for vector 0x400 |
| [ 1.911772] IBS: LVT offset 1 assigned |
| [ 1.915561] perf: AMD IBS detected (0x00000007) |
| [ 1.920720] futex hash table entries: 2048 (order: 5, 131072 bytes) |
| [ 1.927115] audit: initializing netlink subsys (disabled) |
| [ 1.932544] audit: type=2000 audit(1494050977.660:1): initialized |
| [ 1.939422] HugeTLB registered 2 MB page size, pre-allocated 0 pages |
| [ 1.945828] zbud: loaded |
| [ 1.948738] VFS: Disk quotas dquot_6.5.2 |
| [ 1.952709] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) |
| [ 1.959250] msgmni has been set to 9945 |
| [ 1.963605] alg: No test for stdrng (krng) |
| [ 1.967767] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) |
| [ 1.975265] io scheduler noop registered |
| [ 1.979201] io scheduler deadline registered |
| [ 1.983549] io scheduler cfq registered (default) |
| [ 1.988479] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X |
| [ 1.988609] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X |
| [ 1.988720] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X |
| [ 1.988826] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X |
| [ 1.988993] aer 0000:00:0b.0:pcie02: service driver aer loaded |
| [ 1.989017] aer 0000:00:0c.0:pcie02: service driver aer loaded |
| [ 1.989044] aer 0000:00:0d.0:pcie02: service driver aer loaded |
| [ 1.989065] aer 0000:00:0e.0:pcie02: service driver aer loaded |
| [ 1.989088] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt |
| [ 1.996054] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt |
| [ 2.002582] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded |
| [ 2.002592] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt |
| [ 2.009556] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt |
| [ 2.016088] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded |
| [ 2.016098] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt |
| [ 2.023063] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded |
| [ 2.023073] pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt |
| [ 2.030037] pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded |
| [ 2.030067] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 |
| [ 2.035670] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 |
| [ 2.042383] GHES: HEST is not enabled! |
| [ 2.046275] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
| [ 2.072920] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A |
| [ 2.100590] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A |
| [ 2.108507] Linux agpgart interface v0.103 |
| [ 2.112818] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12 |
| [ 2.123437] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| [ 2.128417] serio: i8042 AUX port at 0x60,0x64 irq 12 |
| [ 2.133682] mousedev: PS/2 mouse device common for all mice |
| [ 2.139354] rtc_cmos rtc_cmos: RTC can wake from S4 |
| [ 2.144490] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 |
| [ 2.150892] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs |
| [ 2.158758] ledtrig-cpu: registered to indicate activity on CPUs |
| [ 2.164947] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com> |
| [ 2.171393] AMD IOMMUv2 functionality not available on this system |
| [ 2.177722] TCP: cubic registered |
| [ 2.181207] NET: Registered protocol family 10 |
| [ 2.186107] mip6: Mobile IPv6 |
| [ 2.189090] NET: Registered protocol family 17 |
| [ 2.193621] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 |
| [ 2.202278] mpls_gso: MPLS GSO support |
| [ 2.206898] registered taskstats version 1 |
| [ 2.211760] rtc_cmos rtc_cmos: setting system clock to 2017-05-06 06:09:39 UTC (1494050979) |
| [ 2.220180] PM: Hibernation image not present or could not be loaded. |
| [ 2.221971] Freeing unused kernel memory: 1204K (ffffffff818ee000 - ffffffff81a1b000) |
| [ 2.229825] Write protecting the kernel read-only data: 8192k |
| [ 2.239027] Freeing unused kernel memory: 924K (ffff880001519000 - ffff880001600000) |
| [ 2.247637] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000) |
| [ 2.280423] systemd-udevd[99]: starting version 215 |
| [ 2.286161] random: systemd-udevd urandom read with 4 bits of entropy available |
| [ 2.315274] SCSI subsystem initialized |
| [ 2.320627] pps_core: LinuxPPS API ver. 1 registered |
| [ 2.320691] ACPI: bus type USB registered |
| [ 2.320755] usbcore: registered new interface driver usbfs |
| [ 2.320774] usbcore: registered new interface driver hub |
| [ 2.321298] usbcore: registered new device driver usb |
| [ 2.334963] FDC 0 is a post-1991 82077 |
| [ 2.349302] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> |
| [ 2.359675] libata version 3.00 loaded. |
| [ 2.359802] PTP clock support registered |
| [ 2.364060] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| [ 2.371001] sata_nv 0000:00:07.0: version 3.5 |
| [ 2.371337] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21 |
| [ 2.377732] ehci-pci: EHCI PCI platform driver |
| [ 2.377812] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver |
| [ 2.377814] tg3.c:v3.137 (May 11, 2014) |
| [ 2.377829] tg3 0000:02:00.0: enabling device (0004 -> 0006) |
| [ 2.378059] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17 |
| [ 2.378220] scsi0 : sata_nv |
| [ 2.406833] scsi1 : sata_nv |
| [ 2.409726] ata1: SATA max UDMA/133 cmd 0x3050 ctl 0x3070 bmdma 0x3030 irq 21 |
| [ 2.416863] ata2: SATA max UDMA/133 cmd 0x3058 ctl 0x3074 bmdma 0x3038 irq 21 |
| [ 2.424202] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20 |
| [ 2.430403] scsi2 : sata_nv |
| [ 2.433390] scsi3 : sata_nv |
| [ 2.436260] ata3: SATA max UDMA/133 cmd 0x3060 ctl 0x3078 bmdma 0x3040 irq 20 |
| [ 2.443407] ata4: SATA max UDMA/133 cmd 0x3068 ctl 0x307c bmdma 0x3048 irq 20 |
| [ 2.446303] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:61:a2 |
| [ 2.446306] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) |
| [ 2.446308] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] |
| [ 2.446310] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit] |
| [ 2.446438] tg3 0000:03:00.0: enabling device (0004 -> 0006) |
| [ 2.446622] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16 |
| [ 2.496521] pata_amd 0000:00:06.0: version 0.4.1 |
| [ 2.497154] scsi4 : pata_amd |
| [ 2.500224] scsi5 : pata_amd |
| [ 2.503182] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3020 irq 14 |
| [ 2.510151] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3028 irq 15 |
| [ 2.517382] ehci-pci 0000:00:02.1: EHCI Host Controller |
| [ 2.522687] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1 |
| [ 2.530145] ehci-pci 0000:00:02.1: debug port 1 |
| [ 2.531592] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:63:95 |
| [ 2.531595] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) |
| [ 2.531597] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] |
| [ 2.531598] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit] |
| [ 2.569290] ehci-pci 0000:00:02.1: cache line size of 64 is not supported |
| [ 2.569320] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc303000 |
| [ 2.586824] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00 |
| [ 2.592662] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 |
| [ 2.599457] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.606681] usb usb1: Product: EHCI Host Controller |
| [ 2.611568] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd |
| [ 2.617665] usb usb1: SerialNumber: 0000:00:02.1 |
| [ 2.622574] hub 1-0:1.0: USB hub found |
| [ 2.626350] hub 1-0:1.0: 10 ports detected |
| [ 2.631534] ohci-pci: OHCI PCI platform driver |
| [ 2.636175] ohci-pci 0000:00:02.0: OHCI PCI host controller |
| [ 2.641770] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2 |
| [ 2.649211] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc300000 |
| [ 2.712811] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 |
| [ 2.719605] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.726817] usb usb2: Product: OHCI PCI host controller |
| [ 2.732045] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd |
| [ 2.734772] ata1: SATA link down (SStatus 0 SControl 300) |
| [ 2.743542] usb usb2: SerialNumber: 0000:00:02.0 |
| [ 2.748364] hub 2-0:1.0: USB hub found |
| [ 2.752127] hub 2-0:1.0: 10 ports detected |
| [ 2.806742] ata3: SATA link down (SStatus 0 SControl 300) |
| [ 2.846723] tsc: Refined TSC clocksource calibration: 1909.786 MHz |
| [ 3.046656] ata2: SATA link down (SStatus 0 SControl 300) |
| [ 3.362534] ata4: SATA link down (SStatus 0 SControl 300) |
| [ 3.551537] FS-Cache: Loaded |
| [ 3.559500] RPC: Registered named UNIX socket transport module. |
| [ 3.566613] RPC: Registered udp transport module. |
| [ 3.572708] RPC: Registered tcp transport module. |
| [ 3.578800] RPC: Registered tcp NFSv4.1 backchannel transport module. |
| [ 3.592436] FS-Cache: Netfs 'nfs' registered for caching |
| [ 3.609056] tg3 0000:02:00.0: irq 44 for MSI/MSI-X |
| [ 3.654539] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready |
| [ 3.850464] Switched to clocksource tsc |
| [ 6.739726] tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex |
| [ 6.746344] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX |
| [ 6.753235] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready |
| [ 7.807846] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR) |
| [ 7.821867] systemd[1]: Detected architecture 'x86-64'. |
| [ 7.871366] systemd[1]: Inserted module 'autofs4' |
| [ 7.877579] systemd[1]: Set hostname to <cb-test-tgt>. |
| [ 8.035106] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory. |
| [ 8.047833] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. |
| [ 8.063235] systemd[1]: Expecting device dev-ttyS0.device... |
| [ 8.077064] systemd[1]: Starting Forward Password Requests to Wall Directory Watch. |
| [ 8.084858] systemd[1]: Started Forward Password Requests to Wall Directory Watch. |
| [ 8.092463] systemd[1]: Starting Remote File Systems (Pre). |
| [ 8.108932] systemd[1]: Reached target Remote File Systems (Pre). |
| [ 8.115072] systemd[1]: Starting Encrypted Volumes. |
| [ 8.128920] systemd[1]: Reached target Encrypted Volumes. |
| [ 8.134373] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point. |
| [ 8.157011] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. |
| [ 8.166493] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch. |
| [ 8.174603] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. |
| [ 8.182541] systemd[1]: Starting Paths. |
| [ 8.196923] systemd[1]: Reached target Paths. |
| [ 8.201318] systemd[1]: Starting Swap. |
| [ 8.212888] systemd[1]: Reached target Swap. |
| [ 8.217181] systemd[1]: Starting Root Slice. |
| [ 8.228890] systemd[1]: Created slice Root Slice. |
| [ 8.233619] systemd[1]: Starting User and Session Slice. |
| [ 8.248892] systemd[1]: Created slice User and Session Slice. |
| [ 8.254659] systemd[1]: Starting Delayed Shutdown Socket. |
| [ 8.268870] systemd[1]: Listening on Delayed Shutdown Socket. |
| [ 8.274633] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. |
| [ 8.292864] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. |
| [ 8.299844] systemd[1]: Starting Journal Socket (/dev/log). |
| [ 8.316874] systemd[1]: Listening on Journal Socket (/dev/log). |
| [ 8.322841] systemd[1]: Starting udev Kernel Socket. |
| [ 8.336944] systemd[1]: Listening on udev Kernel Socket. |
| [ 8.342340] systemd[1]: Starting udev Control Socket. |
| [ 8.356859] systemd[1]: Listening on udev Control Socket. |
| [ 8.362302] systemd[1]: Starting Journal Socket. |
| [ 8.376830] systemd[1]: Listening on Journal Socket. |
| [ 8.381841] systemd[1]: Starting System Slice. |
| [ 8.396827] systemd[1]: Created slice System Slice. |
| [ 8.401732] systemd[1]: Starting system-getty.slice. |
| [ 8.416822] systemd[1]: Created slice system-getty.slice. |
| [ 8.422244] systemd[1]: Starting system-serial\x2dgetty.slice. |
| [ 8.436831] systemd[1]: Created slice system-serial\x2dgetty.slice. |
| [ 8.443156] systemd[1]: Starting Increase datagram queue length... |
| [ 8.462029] systemd[1]: Starting udev Coldplug all Devices... |
| [ 8.494282] systemd[1]: Starting Load Kernel Modules... |
| [ 8.512106] systemd[1]: Started Set Up Additional Binary Formats. |
| [ 8.518360] systemd[1]: Mounting Debug File System... |
| [ 8.534180] systemd[1]: Starting Create list of required static device nodes for the current kernel... |
| [ 8.557861] systemd[1]: Mounting POSIX Message Queue File System... |
| [ 8.573573] systemd[1]: Mounting Huge Pages File System... |
| [ 8.589870] systemd[1]: Starting Slices. |
| [ 8.604785] systemd[1]: Reached target Slices. |
| [ 8.609294] systemd[1]: Starting Remount Root and Kernel File Systems... |
| [ 8.636799] systemd[1]: Mounted Huge Pages File System. |
| [ 8.652754] systemd[1]: Mounted POSIX Message Queue File System. |
| [ 8.668803] systemd[1]: Mounted Debug File System. |
| [ 8.684778] systemd[1]: Started Increase datagram queue length. |
| [ 8.700788] systemd[1]: Started Load Kernel Modules. |
| [ 8.720774] systemd[1]: Started Create list of required static device nodes for the current kernel. |
| [ 8.744777] systemd[1]: Started Remount Root and Kernel File Systems. |
| [ 8.760740] systemd[1]: Started udev Coldplug all Devices. |
| [ 8.806612] systemd[1]: Started Various fixups to make systemd work better on Debian. |
| [ 8.814505] systemd[1]: Starting Load/Save Random Seed... |
| [ 8.830416] systemd[1]: Starting Create Static Device Nodes in /dev... |
| [ 8.850202] systemd[1]: Starting Apply Kernel Variables... |
| [ 8.867047] systemd[1]: Mounted Configuration File System. |
| [ 8.872923] systemd[1]: Mounted FUSE Control File System. |
| [ 8.878523] systemd[1]: Starting Syslog Socket. |
| [ 8.892759] systemd[1]: Listening on Syslog Socket. |
| [ 8.897736] systemd[1]: Starting Sockets. |
| [ 8.912724] systemd[1]: Reached target Sockets. |
| [ 8.917330] systemd[1]: Starting Journal Service... |
| [ 8.944734] systemd[1]: Started Journal Service. |
| [ 9.019865] systemd-udevd[212]: starting version 215 |
| [ 9.147276] systemd-journald[211]: Received request to flush runtime journal from PID 1 |
| [ 9.155753] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled |
| [ 9.164942] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled |
| [ 9.174995] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 |
| [ 9.183297] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 |
| [ 9.191878] ACPI: Power Button [PWRB] |
| [ 9.196764] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 |
| [ 9.204651] ACPI: Power Button [PWRF] |
| [ 9.205148] acpi-cpufreq: overriding BIOS provided _PSD data |
| [ 9.215041] input: PC Speaker as /devices/platform/pcspkr/input/input4 |
| [ 9.215467] EDAC MC: Ver: 3.0.0 |
| [ 9.228019] i2c i2c-0: nForce2 SMBus adapter at 0x2c80 |
| [ 9.233714] i2c i2c-1: nForce2 SMBus adapter at 0x2cc0 |
| [ 9.242444] MCE: In-kernel MCE decoding enabled. |
| [ 9.257528] AMD64 EDAC driver v3.4.0 |
| [ 9.261469] EDAC amd64: DRAM ECC enabled. |
| [ 9.265735] EDAC amd64: F10h detected (node 0). |
| [ 9.270372] EDAC MC: DCT0 chip selects: |
| [ 9.270376] EDAC amd64: MC: 0: 0MB 1: 0MB |
| [ 9.275152] EDAC amd64: MC: 2: 0MB 3: 0MB |
| [ 9.279906] EDAC amd64: MC: 4: 0MB 5: 0MB |
| [ 9.284643] EDAC amd64: MC: 6: 2048MB 7: 2048MB |
| [ 9.289382] EDAC MC: DCT1 chip selects: |
| [ 9.289384] EDAC amd64: MC: 0: 0MB 1: 0MB |
| [ 9.294119] EDAC amd64: MC: 2: 0MB 3: 0MB |
| [ 9.298856] EDAC amd64: MC: 4: 0MB 5: 0MB |
| [ 9.303594] EDAC amd64: MC: 6: 1024MB 7: 1024MB |
| [ 9.308322] EDAC amd64: using x4 syndromes. |
| [ 9.312673] EDAC amd64: CS6: Registered DDR2 RAM |
| [ 9.317327] EDAC amd64: CS7: Registered DDR2 RAM |
| [ 9.322167] kvm: Nested Virtualization enabled |
| [ 9.322315] EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT) |
| [ 9.322545] EDAC amd64: DRAM ECC enabled. |
| [ 9.341572] EDAC amd64: F10h detected (node 1). |
| [ 9.341596] kvm: Nested Paging enabled |
| [ 9.351290] EDAC MC: DCT0 chip selects: |
| [ 9.351294] EDAC amd64: MC: 0: 1024MB 1: 0MB |
| [ 9.357008] EDAC amd64: MC: 2: 0MB 3: 0MB |
| [ 9.361760] EDAC amd64: MC: 4: 0MB 5: 0MB |
| [ 9.366509] EDAC amd64: MC: 6: 0MB 7: 0MB |
| [ 9.371224] EDAC MC: DCT1 chip selects: |
| [ 9.371228] EDAC amd64: MC: 0: 0MB 1: 0MB |
| [ 9.375952] EDAC amd64: MC: 2: 0MB 3: 0MB |
| [ 9.375955] EDAC amd64: MC: 4: 0MB 5: 0MB |
| [ 9.375964] EDAC amd64: MC: 6: 0MB 7: 0MB |
| [ 9.375966] EDAC amd64: using x4 syndromes. |
| [ 9.375969] EDAC amd64: MCT channel count: 1 |
| [ 9.376370] EDAC amd64: CS0: Registered DDR2 RAM |
| [ 9.376564] EDAC MC1: Giving out device to module amd64_edac controller F10h: DEV 0000:00:19.2 (INTERRUPT) |
| [ 9.376639] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED) |
| [ 9.518888] random: nonblocking pool is initialized |
| [ 39.673884] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS***** |