| [ 0.000000] Initializing cgroup subsys cpuset |
| [ 0.000000] Initializing cgroup subsys cpu |
| [ 0.000000] Initializing cgroup subsys cpuacct |
| [ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01) |
| [ 0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.1:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=tty0 console=ttyS0,115200n8 rw BOOT_IMAGE=vmlinuz-cb-test-tgt |
| [ 0.000000] e820: BIOS-provided physical RAM map: |
| [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff9afff] usable |
| [ 0.000000] BIOS-e820: [mem 0x00000000bff9b000-0x00000000cfffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable |
| [ 0.000000] NX (Execute Disable) protection: active |
| [ 0.000000] SMBIOS 2.7 present. |
| [ 0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS 4.0-9959-g28a28e2-dirty 06/10/2015 |
| [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable |
| [ 0.000000] AGP: No AGP bridge found |
| [ 0.000000] e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000 |
| [ 0.000000] MTRR default type: uncachable |
| [ 0.000000] MTRR fixed ranges enabled: |
| [ 0.000000] 00000-9FFFF write-back |
| [ 0.000000] A0000-BFFFF uncachable |
| [ 0.000000] C0000-FFFFF write-back |
| [ 0.000000] MTRR variable ranges enabled: |
| [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back |
| [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back |
| [ 0.000000] 2 base 0000F8000000 mask FFFFFC000000 write-combining |
| [ 0.000000] 3 disabled |
| [ 0.000000] 4 disabled |
| [ 0.000000] 5 disabled |
| [ 0.000000] 6 disabled |
| [ 0.000000] 7 disabled |
| [ 0.000000] TOM2: 0000000180000000 aka 6144M |
| [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 |
| [ 0.000000] e820: last_pfn = 0xbff9b max_arch_pfn = 0x400000000 |
| [ 0.000000] found SMP MP-table at [mem 0x000f1cf0-0x000f1cff] mapped at [ffff8800000f1cf0] |
| [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 |
| [ 0.000000] Using GB pages for direct mapping |
| [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] |
| [ 0.000000] [mem 0x00000000-0x000fffff] page 4k |
| [ 0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE |
| [ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE |
| [ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE |
| [ 0.000000] init_memory_mapping: [mem 0x17fe00000-0x17fffffff] |
| [ 0.000000] [mem 0x17fe00000-0x17fffffff] page 1G |
| [ 0.000000] init_memory_mapping: [mem 0x17c000000-0x17fdfffff] |
| [ 0.000000] [mem 0x17c000000-0x17fdfffff] page 1G |
| [ 0.000000] init_memory_mapping: [mem 0x100000000-0x17bffffff] |
| [ 0.000000] [mem 0x100000000-0x17bffffff] page 1G |
| [ 0.000000] init_memory_mapping: [mem 0x00100000-0xbff9afff] |
| [ 0.000000] [mem 0x00100000-0x001fffff] page 4k |
| [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M |
| [ 0.000000] [mem 0x40000000-0x7fffffff] page 1G |
| [ 0.000000] [mem 0x80000000-0xbfdfffff] page 2M |
| [ 0.000000] [mem 0xbfe00000-0xbff9afff] page 4k |
| [ 0.000000] RAMDISK: [mem 0x7f775000-0x7fffefff] |
| [ 0.000000] ACPI: Early table checksum verification disabled |
| [ 0.000000] ACPI: RSDP 0x00000000000F1EC0 000024 (v02 CORE ) |
| [ 0.000000] ACPI: XSDT 0x00000000BFFB40E0 00006C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: FACP 0x00000000BFFB68A0 000074 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: DSDT 0x00000000BFFB4250 002644 (v02 ASUS COREBOOT 00000001 INTL 20150204) |
| [ 0.000000] ACPI: FACS 0x00000000BFFB4210 000040 |
| [ 0.000000] ACPI: SSDT 0x00000000BFFB69A0 000E57 (v02 CORE COREBOOT 0000002A CORE 0000002A) |
| [ 0.000000] ACPI: TCPA 0x00000000BFFB7800 000032 (v02 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: APIC 0x00000000BFFB7840 0000C6 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SRAT 0x00000000BFFB7910 000178 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SLIT 0x00000000BFFB7A88 000030 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: HPET 0x00000000BFFB7AC0 000038 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SRAT 0x00000000BFFB7B00 000178 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SLIT 0x00000000BFFB7C78 000030 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0 |
| [ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0 |
| [ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0 |
| [ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0 |
| [ 0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1 |
| [ 0.000000] SRAT: PXM 1 -> APIC 0x05 -> Node 1 |
| [ 0.000000] SRAT: PXM 1 -> APIC 0x06 -> Node 1 |
| [ 0.000000] SRAT: PXM 1 -> APIC 0x07 -> Node 1 |
| [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff] |
| [ 0.000000] SRAT: Node 2 PXM 7 [mem 0x00100000-0xbfffffff] |
| [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff] |
| [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x13fffffff] |
| [ 0.000000] SRAT: Node 1 PXM 1 [mem 0x140000000-0x17fffffff] |
| [ 0.000000] NUMA: Initialized distance table, cnt=3 |
| [ 0.000000] NUMA: node 2 [mem 0x00100000-0xbfffffff] overlaps with node 0 [mem 0x00100000-0xbfffffff] |
| [ 0.000000] Scanning NUMA topology in Northbridge 24 |
| [ 0.000000] Number of physical nodes 2 |
| [ 0.000000] Node 0 MemBase 0000000000000000 Limit 0000000140000000 |
| [ 0.000000] Node 1 MemBase 0000000140000000 Limit 0000000180000000 |
| [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff] |
| [ 0.000000] NODE_DATA [mem 0x13fffb000-0x13fffffff] |
| [ 0.000000] Initmem setup node 1 [mem 0x140000000-0x17fffffff] |
| [ 0.000000] NODE_DATA [mem 0x17fff9000-0x17fffdfff] |
| [ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013be00000-ffff88013f5fffff] on node 0 |
| [ 0.000000] [ffffea0004600000-ffffea00053fffff] PMD -> [ffff88017e600000-ffff88017f3fffff] on node 1 |
| [ 0.000000] Zone ranges: |
| [ 0.000000] DMA [mem 0x00001000-0x00ffffff] |
| [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] |
| [ 0.000000] Normal [mem 0x100000000-0x17fffffff] |
| [ 0.000000] Movable zone start for each node |
| [ 0.000000] Early memory node ranges |
| [ 0.000000] node 0: [mem 0x00001000-0x0009efff] |
| [ 0.000000] node 0: [mem 0x00100000-0xbff9afff] |
| [ 0.000000] node 0: [mem 0x100000000-0x13fffffff] |
| [ 0.000000] node 1: [mem 0x140000000-0x17fffffff] |
| [ 0.000000] On node 0 totalpages: 1048377 |
| [ 0.000000] DMA zone: 56 pages used for memmap |
| [ 0.000000] DMA zone: 21 pages reserved |
| [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 |
| [ 0.000000] DMA32 zone: 10695 pages used for memmap |
| [ 0.000000] DMA32 zone: 782235 pages, LIFO batch:31 |
| [ 0.000000] Normal zone: 3584 pages used for memmap |
| [ 0.000000] Normal zone: 262144 pages, LIFO batch:31 |
| [ 0.000000] On node 1 totalpages: 262144 |
| [ 0.000000] Normal zone: 3584 pages used for memmap |
| [ 0.000000] Normal zone: 262144 pages, LIFO batch:31 |
| [ 0.000000] ACPI: PM-Timer IO Port: 0x2008 |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) |
| [ 0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0]) |
| [ 0.000000] IOAPIC[0]: apic_id 24, version 17, address 0xfec00000, GSI 0-23 |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) |
| [ 0.000000] ACPI: IRQ9 used by override. |
| [ 0.000000] ACPI: IRQ14 used by override. |
| [ 0.000000] ACPI: IRQ15 used by override. |
| [ 0.000000] Using ACPI (MADT) for SMP configuration information |
| [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 |
| [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs |
| [ 0.000000] nr_irqs_gsi: 40 |
| [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xbff9b000-0xcfffffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xffffffff] |
| [ 0.000000] e820: [mem 0xd0000000-0xffffffff] available for PCI devices |
| [ 0.000000] Booting paravirtualized kernel on bare hardware |
| [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:2 |
| [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s80896 r8192 d21504 u524288 |
| [ 0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152 |
| [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [1] 4 5 6 7 |
| [ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 1292581 |
| [ 0.000000] Policy zone: Normal |
| [ 0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.1:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=tty0 console=ttyS0,115200n8 rw BOOT_IMAGE=vmlinuz-cb-test-tgt |
| [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) |
| [ 0.000000] AGP: Checking aperture... |
| [ 0.000000] AGP: No AGP bridge found |
| [ 0.000000] AGP: Node 0: aperture [bus addr 0xe5ea000000-0xe5ebffffff] (32MB) |
| [ 0.000000] Aperture beyond 4GB. Ignoring. |
| [ 0.000000] AGP: Your BIOS doesn't leave a aperture memory hole |
| [ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup |
| [ 0.000000] AGP: This costs you 64MB of RAM |
| [ 0.000000] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB) |
| [ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff] |
| [ 0.000000] Memory: 5017492K/5242084K available (5203K kernel code, 943K rwdata, 1832K rodata, 1204K init, 840K bss, 224592K reserved) |
| [ 0.000000] Hierarchical RCU implementation. |
| [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. |
| [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8. |
| [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 |
| [ 0.000000] NR_IRQS:33024 nr_irqs:744 16 |
| [ 0.000000] spurious 8259A interrupt: IRQ7. |
| [ 0.000000] Console: colour VGA+ 80x25 |
| [ 0.000000] console [tty0] enabled |
| [ 0.000000] console [ttyS0] enabled |
| [ 0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl |
| [ 0.000000] hpet clockevent registered |
| [ 0.000000] tsc: Fast TSC calibration using PIT |
| [ 0.000000] tsc: Detected 1909.692 MHz processor |
| [ 0.000158] Calibrating delay loop (skipped), value calculated using timer frequency.. 3819.38 BogoMIPS (lpj=7638768) |
| [ 0.010953] pid_max: default: 32768 minimum: 301 |
| [ 0.015675] ACPI: Core revision 20140424 |
| [ 0.022100] ACPI: All ACPI Tables successfully acquired |
| [ 0.027600] Security Framework initialized |
| [ 0.031779] AppArmor: AppArmor disabled by boot time parameter |
| [ 0.037689] Yama: disabled by default; enable with sysctl kernel.yama.* |
| [ 0.045509] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) |
| [ 0.058831] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) |
| [ 0.068698] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) |
| [ 0.075712] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) |
| [ 0.083672] Initializing cgroup subsys memory |
| [ 0.088141] Initializing cgroup subsys devices |
| [ 0.092691] Initializing cgroup subsys freezer |
| [ 0.097216] Initializing cgroup subsys net_cls |
| [ 0.101761] Initializing cgroup subsys blkio |
| [ 0.106116] Initializing cgroup subsys perf_event |
| [ 0.110912] Initializing cgroup subsys net_prio |
| [ 0.115570] tseg: 0000000000 |
| [ 0.115584] CPU: Physical Processor ID: 0 |
| [ 0.119703] CPU: Processor Core ID: 0 |
| [ 0.124508] mce: CPU supports 6 MCE banks |
| [ 0.128649] LVT offset 0 assigned for vector 0xf9 |
| [ 0.133443] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8 |
| Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0 |
| tlb_flushall_shift: 6 |
| [ 0.148922] Freeing SMP alternatives memory: 20K (ffffffff81a1a000 - ffffffff81a1f000) |
| [ 0.158058] ftrace: allocating 21601 entries in 85 pages |
| [ 0.173503] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0 |
| [ 0.219143] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 8347 (fam: 10, model: 02, stepping: 01) |
| [ 0.336309] Performance Events: AMD PMU driver. |
| [ 0.341021] ... version: 0 |
| [ 0.345102] ... bit width: 48 |
| [ 0.349279] ... generic registers: 4 |
| [ 0.353369] ... value mask: 0000ffffffffffff |
| [ 0.358752] ... max period: 00007fffffffffff |
| [ 0.364121] ... fixed-purpose events: 0 |
| [ 0.368208] ... event mask: 000000000000000f |
| [ 0.376185] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. |
| [ 0.384524] x86: Booting SMP configuration: |
| [ 0.388793] .... node #0, CPUs: #1 #2 #3 |
| [ 0.433373] .... node #1, CPUs: #4 #5 #6 #7 |
| [ 0.585087] x86: Booted up 2 nodes, 8 CPUs |
| [ 0.589517] smpboot: Total of 8 processors activated (30556.72 BogoMIPS) |
| [ 0.602107] devtmpfs: initialized |
| [ 0.614107] pinctrl core: initialized pinctrl subsystem |
| [ 0.619587] NET: Registered protocol family 16 |
| [ 0.624322] cpuidle: using governor ladder |
| [ 0.628505] cpuidle: using governor menu |
| [ 0.632510] node 0 link 1: io port [1000, 3fff] |
| [ 0.632514] TOM: 00000000c0000000 aka 3072M |
| [ 0.636768] Fam 10h mmconf [mem 0xc0000000-0xcfffffff] |
| [ 0.636772] node 0 link 1: mmio [fc000000, fc3fffff] |
| [ 0.636776] node 0 link 1: mmio [f8000000, fbffffff] |
| [ 0.636778] TOM2: 0000000180000000 aka 6144M |
| [ 0.641118] bus: [bus 00-05] on node 0 link 1 |
| [ 0.641120] bus: 00 [io 0x0000-0xffff] |
| [ 0.641122] bus: 00 [mem 0xd0000000-0xffffffff] |
| [ 0.641124] bus: 00 [mem 0x180000000-0xfcffffffff] |
| [ 0.641230] ACPI: bus type PCI registered |
| [ 0.645318] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 |
| [ 0.651996] PCI: Using configuration type 1 for base access |
| [ 0.657641] PCI: Using configuration type 1 for extended access |
| [ 0.664267] mtrr: your CPUs had inconsistent variable MTRR settings |
| [ 0.670618] mtrr: probably your BIOS does not setup all CPUs. |
| [ 0.676449] mtrr: corrected configuration. |
| [ 0.693212] ACPI: Added _OSI(Module Device) |
| [ 0.697517] ACPI: Added _OSI(Processor Device) |
| [ 0.702039] ACPI: Added _OSI(3.0 _SCP Extensions) |
| [ 0.706822] ACPI: Added _OSI(Processor Aggregator Device) |
| [ 0.715882] ACPI: Interpreter enabled |
| [ 0.719638] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580) |
| [ 0.729077] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580) |
| [ 0.738517] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580) |
| [ 0.747948] ACPI: (supports S0 S1 S5) |
| [ 0.751700] ACPI: Using IOAPIC for interrupt routing |
| [ 0.756782] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| [ 0.784006] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05]) |
| [ 0.790264] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] |
| [ 0.798569] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] |
| [ 0.836176] acpi PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x03b0-0x03df] ignored |
| [ 0.846313] PCI host bridge to bus 0000:00 |
| [ 0.850502] pci_bus 0000:00: root bus resource [bus 00-05] |
| [ 0.856079] pci_bus 0000:00: root bus resource [io 0x0d00-0x3fff] |
| [ 0.862353] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff] |
| [ 0.869320] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc3fffff] |
| [ 0.876272] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] |
| [ 0.882559] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000 |
| [ 0.882741] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100 |
| [ 0.882749] pci 0000:00:01.0: reg 0x10: [io 0x2c00-0x2c7f] |
| [ 0.882873] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500 |
| [ 0.882881] pci 0000:00:01.1: reg 0x10: [io 0x3000-0x301f] |
| [ 0.882906] pci 0000:00:01.1: reg 0x20: [io 0x2c80-0x2cbf] |
| [ 0.882911] pci 0000:00:01.1: reg 0x24: [io 0x2cc0-0x2cff] |
| [ 0.882941] pci 0000:00:01.1: PME# supported from D3hot D3cold |
| [ 0.883042] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310 |
| [ 0.883056] pci 0000:00:02.0: reg 0x10: [mem 0xfc300000-0xfc300fff] |
| [ 0.883083] pci 0000:00:02.0: supports D1 D2 |
| [ 0.883094] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.883155] pci 0000:00:02.0: System wakeup disabled by ACPI |
| [ 0.888957] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320 |
| [ 0.888972] pci 0000:00:02.1: reg 0x10: [mem 0xfc303000-0xfc3030ff] |
| [ 0.889016] pci 0000:00:02.1: supports D1 D2 |
| [ 0.889019] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.889066] pci 0000:00:02.1: System wakeup disabled by ACPI |
| [ 0.894885] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a |
| [ 0.894929] pci 0000:00:06.0: reg 0x20: [io 0x3020-0x302f] |
| [ 0.894940] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] |
| [ 0.902174] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io 0x03f6] |
| [ 0.908795] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] |
| [ 0.916016] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io 0x0376] |
| [ 0.922729] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185 |
| [ 0.922740] pci 0000:00:07.0: reg 0x10: [io 0x3050-0x3057] |
| [ 0.922745] pci 0000:00:07.0: reg 0x14: [io 0x3070-0x3073] |
| [ 0.922749] pci 0000:00:07.0: reg 0x18: [io 0x3058-0x305f] |
| [ 0.922754] pci 0000:00:07.0: reg 0x1c: [io 0x3074-0x3077] |
| [ 0.922758] pci 0000:00:07.0: reg 0x20: [io 0x3030-0x303f] |
| [ 0.922763] pci 0000:00:07.0: reg 0x24: [mem 0xfc301000-0xfc301fff] |
| [ 0.922902] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185 |
| [ 0.922914] pci 0000:00:08.0: reg 0x10: [io 0x3060-0x3067] |
| [ 0.922924] pci 0000:00:08.0: reg 0x14: [io 0x3078-0x307b] |
| [ 0.922928] pci 0000:00:08.0: reg 0x18: [io 0x3068-0x306f] |
| [ 0.922942] pci 0000:00:08.0: reg 0x1c: [io 0x307c-0x307f] |
| [ 0.922957] pci 0000:00:08.0: reg 0x20: [io 0x3040-0x304f] |
| [ 0.922971] pci 0000:00:08.0: reg 0x24: [mem 0xfc302000-0xfc302fff] |
| [ 0.923146] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400 |
| [ 0.923221] pci 0000:00:09.0: System wakeup disabled by ACPI |
| [ 0.929012] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400 |
| [ 0.929062] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.929116] pci 0000:00:0b.0: System wakeup disabled by ACPI |
| [ 0.934925] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400 |
| [ 0.934978] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.935078] pci 0000:00:0c.0: System wakeup disabled by ACPI |
| [ 0.940879] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400 |
| [ 0.940919] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.940983] pci 0000:00:0d.0: System wakeup disabled by ACPI |
| [ 0.946778] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400 |
| [ 0.946817] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.946874] pci 0000:00:0e.0: System wakeup disabled by ACPI |
| [ 0.952701] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000 |
| [ 0.952895] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000 |
| [ 0.953010] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000 |
| [ 0.953133] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000 |
| [ 0.953289] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000 |
| [ 0.953402] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000 |
| [ 0.953556] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000 |
| [ 0.953683] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000 |
| [ 0.953824] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000 |
| [ 0.953981] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000 |
| [ 0.954181] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000 |
| [ 0.954200] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref] |
| [ 0.954214] pci 0000:01:04.0: reg 0x14: [mem 0xfc000000-0xfc03ffff] |
| [ 0.954228] pci 0000:01:04.0: reg 0x18: [io 0x1000-0x107f] |
| [ 0.954263] pci 0000:01:04.0: supports D1 D2 |
| [ 0.954358] pci 0000:00:09.0: PCI bridge to [bus 01] |
| [ 0.959408] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff] |
| [ 0.959412] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff] |
| [ 0.959415] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref] |
| [ 0.959513] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000 |
| [ 0.959542] pci 0000:02:00.0: reg 0x10: [mem 0xfc100000-0xfc10ffff 64bit] |
| [ 0.959579] pci 0000:02:00.0: reg 0x30: [mem 0x78400000-0x7840ffff pref] |
| [ 0.959662] pci 0000:02:00.0: PME# supported from D3hot D3cold |
| [ 0.959750] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' |
| [ 0.969867] pci 0000:00:0b.0: PCI bridge to [bus 02] |
| [ 0.974928] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff] |
| [ 0.975027] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000 |
| [ 0.975052] pci 0000:03:00.0: reg 0x10: [mem 0xfc200000-0xfc20ffff 64bit] |
| [ 0.975167] pci 0000:03:00.0: PME# supported from D3hot D3cold |
| [ 0.975252] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' |
| [ 0.985370] pci 0000:00:0c.0: PCI bridge to [bus 03] |
| [ 0.990427] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff] |
| [ 0.990497] pci 0000:00:0d.0: PCI bridge to [bus 04] |
| [ 0.995632] pci 0000:00:0e.0: PCI bridge to [bus 05] |
| [ 1.000698] pci_bus 0000:00: on NUMA node 0 |
| [ 1.000799] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19) |
| [ 1.007225] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19) |
| [ 1.013657] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled. |
| [ 1.021308] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled. |
| [ 1.028963] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled. |
| [ 1.036615] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.044324] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23) |
| [ 1.050743] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23) |
| [ 1.057166] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.064803] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.072453] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.080107] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23) |
| [ 1.086533] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23) |
| [ 1.092975] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.100641] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.108294] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled. |
| [ 1.115985] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. |
| [ 1.125094] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled. |
| [ 1.131800] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled. |
| [ 1.138517] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled. |
| [ 1.145249] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled. |
| [ 1.152218] ACPI: Enabled 1 GPEs in block 00 to 1F |
| [ 1.157480] vgaarb: setting as boot device: PCI:0000:01:04.0 |
| [ 1.163274] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none |
| [ 1.171465] vgaarb: loaded |
| [ 1.174262] vgaarb: bridge control possible 0000:01:04.0 |
| [ 1.179832] PCI: Using ACPI for IRQ routing |
| [ 1.184109] PCI: pci_cache_line_size set to 64 bytes |
| [ 1.184166] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] |
| [ 1.184169] e820: reserve RAM buffer [mem 0xbff9b000-0xbfffffff] |
| [ 1.184499] HPET: 3 timers in total, 0 timers will be used for per-cpu timer |
| [ 1.191636] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 |
| [ 1.196903] hpet0: 3 comparators, 32-bit 25.000000 MHz counter |
| [ 1.205650] Switched to clocksource hpet |
| [ 1.221305] pnp: PnP ACPI init |
| [ 1.224544] ACPI: bus type PNP registered |
| [ 1.229153] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) |
| [ 1.229240] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active) |
| [ 1.229323] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active) |
| [ 1.229418] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active) |
| [ 1.229456] pnp 00:04: [dma 2] |
| [ 1.229503] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active) |
| [ 1.229525] pnp: PnP ACPI: found 5 devices |
| [ 1.233721] ACPI: bus type PNP unregistered |
| [ 1.245787] pci 0000:02:00.0: can't claim BAR 6 [mem 0x78400000-0x7840ffff pref]: no compatible bridge window |
| [ 1.255899] pci 0000:00:09.0: PCI bridge to [bus 01] |
| [ 1.260939] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff] |
| [ 1.267110] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff] |
| [ 1.273983] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref] |
| [ 1.281317] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc110000-0xfc11ffff pref] |
| [ 1.288679] pci 0000:00:0b.0: PCI bridge to [bus 02] |
| [ 1.293730] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff] |
| [ 1.300606] pci 0000:00:0c.0: PCI bridge to [bus 03] |
| [ 1.305650] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff] |
| [ 1.312526] pci 0000:00:0d.0: PCI bridge to [bus 04] |
| [ 1.317592] pci 0000:00:0e.0: PCI bridge to [bus 05] |
| [ 1.322644] pci_bus 0000:00: resource 4 [io 0x0d00-0x3fff] |
| [ 1.322647] pci_bus 0000:00: resource 5 [mem 0xf8000000-0xfbffffff] |
| [ 1.322649] pci_bus 0000:00: resource 6 [mem 0xfc000000-0xfc3fffff] |
| [ 1.322652] pci_bus 0000:00: resource 7 [io 0x0000-0x0cf7] |
| [ 1.322655] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] |
| [ 1.322658] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff] |
| [ 1.322660] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref] |
| [ 1.322663] pci_bus 0000:02: resource 1 [mem 0xfc100000-0xfc1fffff] |
| [ 1.322666] pci_bus 0000:03: resource 1 [mem 0xfc200000-0xfc2fffff] |
| [ 1.322798] NET: Registered protocol family 2 |
| [ 1.327751] TCP established hash table entries: 65536 (order: 7, 524288 bytes) |
| [ 1.335568] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) |
| [ 1.342990] TCP: Hash tables configured (established 65536 bind 65536) |
| [ 1.349669] TCP: reno registered |
| [ 1.352995] UDP hash table entries: 4096 (order: 5, 131072 bytes) |
| [ 1.359264] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) |
| [ 1.366106] NET: Registered protocol family 1 |
| [ 1.370935] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23 |
| [ 1.377137] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22 |
| [ 1.383122] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.388736] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.394329] pci 0000:00:0b.0: Found disabled HT MSI Mapping |
| [ 1.399981] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.405610] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.411212] pci 0000:00:0c.0: Found disabled HT MSI Mapping |
| [ 1.416874] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.422498] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.428092] pci 0000:00:0d.0: Found disabled HT MSI Mapping |
| [ 1.433750] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.439367] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.444957] pci 0000:00:0e.0: Found disabled HT MSI Mapping |
| [ 1.450619] pci 0000:00:00.0: Found enabled HT MSI Mapping |
| [ 1.456211] pci 0000:01:04.0: Video device with shadowed ROM |
| [ 1.456219] PCI: CLS 64 bytes, default 64 |
| [ 1.456328] Unpacking initramfs... |
| [ 1.689225] Freeing initrd memory: 8744K (ffff88007f775000 - ffff88007ffff000) |
| [ 1.697199] PCI-DMA: Disabling AGP. |
| [ 1.702439] PCI-DMA: aperture base @ b4000000 size 65536 KB |
| [ 1.708136] PCI-DMA: using GART IOMMU. |
| [ 1.711973] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture |
| [ 1.724427] platform rtc_cmos: registered platform RTC device (no PNP device found) |
| [ 1.732766] microcode: CPU0: patch_level=0x01000096 |
| [ 1.737764] microcode: CPU1: patch_level=0x01000096 |
| [ 1.742769] microcode: CPU2: patch_level=0x01000096 |
| [ 1.747773] microcode: CPU3: patch_level=0x01000096 |
| [ 1.752782] microcode: CPU4: patch_level=0x01000096 |
| [ 1.757781] microcode: CPU5: patch_level=0x01000096 |
| [ 1.762775] microcode: CPU6: patch_level=0x01000096 |
| [ 1.768852] microcode: CPU7: patch_level=0x01000096 |
| [ 1.773926] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba |
| [ 1.782867] LVT offset 1 assigned for vector 0x400 |
| [ 1.787781] IBS: LVT offset 1 assigned |
| [ 1.791653] perf: AMD IBS detected (0x00000007) |
| [ 1.796878] futex hash table entries: 2048 (order: 5, 131072 bytes) |
| [ 1.803366] audit: initializing netlink subsys (disabled) |
| [ 1.808876] audit: type=2000 audit(1433914327.620:1): initialized |
| [ 1.815818] HugeTLB registered 2 MB page size, pre-allocated 0 pages |
| [ 1.822325] zbud: loaded |
| [ 1.825335] VFS: Disk quotas dquot_6.5.2 |
| [ 1.829383] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) |
| [ 1.836018] msgmni has been set to 9945 |
| [ 1.840464] alg: No test for stdrng (krng) |
| [ 1.844737] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) |
| [ 1.852395] io scheduler noop registered |
| [ 1.856430] io scheduler deadline registered |
| [ 1.860887] io scheduler cfq registered (default) |
| [ 1.865922] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X |
| [ 1.866050] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X |
| [ 1.866164] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X |
| [ 1.866277] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X |
| [ 1.866445] aer 0000:00:0b.0:pcie02: service driver aer loaded |
| [ 1.866473] aer 0000:00:0c.0:pcie02: service driver aer loaded |
| [ 1.866499] aer 0000:00:0d.0:pcie02: service driver aer loaded |
| [ 1.866525] aer 0000:00:0e.0:pcie02: service driver aer loaded |
| [ 1.866546] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt |
| [ 1.873625] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt |
| [ 1.880264] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded |
| [ 1.880274] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt |
| [ 1.887316] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt |
| [ 1.893924] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded |
| [ 1.893934] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt |
| [ 1.900979] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded |
| [ 1.900988] pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt |
| [ 1.908031] pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded |
| [ 1.908063] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 |
| [ 1.913764] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 |
| [ 1.920600] GHES: HEST is not enabled! |
| [ 1.924566] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
| [ 1.951359] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A |
| [ 1.979143] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A |
| [ 1.987170] Linux agpgart interface v0.103 |
| [ 1.991585] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12 |
| [ 2.002119] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| [ 2.007212] serio: i8042 AUX port at 0x60,0x64 irq 12 |
| [ 2.012558] mousedev: PS/2 mouse device common for all mice |
| [ 2.018330] rtc_cmos rtc_cmos: RTC can wake from S4 |
| [ 2.023542] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 |
| [ 2.030028] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs |
| [ 2.038016] ledtrig-cpu: registered to indicate activity on CPUs |
| [ 2.044290] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com> |
| [ 2.050821] AMD IOMMUv2 functionality not available on this system |
| [ 2.057242] TCP: cubic registered |
| [ 2.060795] NET: Registered protocol family 10 |
| [ 2.065766] mip6: Mobile IPv6 |
| [ 2.068830] NET: Registered protocol family 17 |
| [ 2.073442] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 |
| [ 2.082221] mpls_gso: MPLS GSO support |
| [ 2.086932] registered taskstats version 1 |
| [ 2.091899] rtc_cmos rtc_cmos: setting system clock to 2015-06-10 05:32:08 UTC (1433914328) |
| [ 2.100476] PM: Hibernation image not present or could not be loaded. |
| [ 2.102301] Freeing unused kernel memory: 1204K (ffffffff818ed000 - ffffffff81a1a000) |
| [ 2.110302] Write protecting the kernel read-only data: 8192k |
| [ 2.119628] Freeing unused kernel memory: 928K (ffff880001518000 - ffff880001600000) |
| [ 2.128350] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000) |
| [ 2.152308] systemd-udevd[99]: starting version 215 |
| [ 2.158173] random: systemd-udevd urandom read with 3 bits of entropy available |
| [ 2.188251] ACPI: bus type USB registered |
| [ 2.192573] usbcore: registered new interface driver usbfs |
| [ 2.198229] usbcore: registered new interface driver hub |
| [ 2.203846] usbcore: registered new device driver usb |
| [ 2.203853] pps_core: LinuxPPS API ver. 1 registered |
| [ 2.203854] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> |
| [ 2.223868] PTP clock support registered |
| [ 2.228209] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| [ 2.235229] tg3.c:v3.137 (May 11, 2014) |
| [ 2.239215] tg3 0000:02:00.0: enabling device (0004 -> 0006) |
| [ 2.245131] ehci-pci: EHCI PCI platform driver |
| [ 2.245241] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17 |
| [ 2.255801] ehci-pci 0000:00:02.1: EHCI Host Controller |
| [ 2.261184] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1 |
| [ 2.268767] ehci-pci 0000:00:02.1: debug port 1 |
| [ 2.268885] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver |
| [ 2.279742] ehci-pci 0000:00:02.1: cache line size of 64 is not supported |
| [ 2.279779] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc303000 |
| [ 2.297317] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00 |
| [ 2.303295] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 |
| [ 2.310174] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.312840] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:61:a2 |
| [ 2.312843] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) |
| [ 2.312845] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] |
| [ 2.312847] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit] |
| [ 2.312980] tg3 0000:03:00.0: enabling device (0004 -> 0006) |
| [ 2.313169] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16 |
| [ 2.363931] usb usb1: Product: EHCI Host Controller |
| [ 2.368890] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd |
| [ 2.375070] usb usb1: SerialNumber: 0000:00:02.1 |
| [ 2.380052] hub 1-0:1.0: USB hub found |
| [ 2.383942] hub 1-0:1.0: 10 ports detected |
| [ 2.389160] ohci-pci: OHCI PCI platform driver |
| [ 2.393966] ohci-pci 0000:00:02.0: OHCI PCI host controller |
| [ 2.399682] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2 |
| [ 2.407258] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc300000 |
| [ 2.421739] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:63:95 |
| [ 2.432200] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) |
| [ 2.442067] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] |
| [ 2.450005] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit] |
| [ 2.467296] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 |
| [ 2.474236] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.481567] usb usb2: Product: OHCI PCI host controller |
| [ 2.486889] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd |
| [ 2.493073] usb usb2: SerialNumber: 0000:00:02.0 |
| [ 2.497976] hub 2-0:1.0: USB hub found |
| [ 2.501862] hub 2-0:1.0: 10 ports detected |
| [ 2.512706] FS-Cache: Loaded |
| [ 2.519213] RPC: Registered named UNIX socket transport module. |
| [ 2.525868] RPC: Registered udp transport module. |
| [ 2.531958] RPC: Registered tcp transport module. |
| [ 2.538056] RPC: Registered tcp NFSv4.1 backchannel transport module. |
| [ 2.550471] FS-Cache: Netfs 'nfs' registered for caching |
| [ 2.568391] tg3 0000:02:00.0: irq 44 for MSI/MSI-X |
| [ 2.613275] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready |
| [ 2.721144] tsc: Refined TSC clocksource calibration: 1909.786 MHz |
| [ 3.724897] Switched to clocksource tsc |
| [ 4.248498] tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex |
| [ 4.255171] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX |
| [ 4.262133] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready |
| [ 10.577985] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR) |
| [ 10.592189] systemd[1]: Detected architecture 'x86-64'. |
| [ 12.811969] random: nonblocking pool is initialized |
| [ 13.404408] systemd[1]: Inserted module 'autofs4' |
| [ 13.413663] systemd[1]: Set hostname to <cb-test-tgt>. |
| [ 16.594025] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory. |
| [ 16.606921] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. |
| [ 16.622534] systemd[1]: Expecting device dev-ttyS0.device... |
| [ 16.636485] systemd[1]: Starting Forward Password Requests to Wall Directory Watch. |
| [ 16.644471] systemd[1]: Started Forward Password Requests to Wall Directory Watch. |
| [ 16.652207] systemd[1]: Starting Remote File Systems (Pre). |
| [ 16.668442] systemd[1]: Reached target Remote File Systems (Pre). |
| [ 16.674836] systemd[1]: Starting Encrypted Volumes. |
| [ 16.688366] systemd[1]: Reached target Encrypted Volumes. |
| [ 16.693939] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch. |
| [ 16.702126] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. |
| [ 16.710175] systemd[1]: Starting Paths. |
| [ 16.724337] systemd[1]: Reached target Paths. |
| [ 16.728832] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point. |
| [ 16.752335] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. |
| [ 16.761913] systemd[1]: Starting Swap. |
| [ 16.776322] systemd[1]: Reached target Swap. |
| [ 16.780722] systemd[1]: Starting Root Slice. |
| [ 16.792315] systemd[1]: Created slice Root Slice. |
| [ 16.797146] systemd[1]: Starting User and Session Slice. |
| [ 16.812310] systemd[1]: Created slice User and Session Slice. |
| [ 16.818201] systemd[1]: Starting Delayed Shutdown Socket. |
| [ 16.832304] systemd[1]: Listening on Delayed Shutdown Socket. |
| [ 16.838207] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. |
| [ 16.856278] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. |
| [ 16.863361] systemd[1]: Starting Journal Socket (/dev/log). |
| [ 16.892266] systemd[1]: Listening on Journal Socket (/dev/log). |
| [ 16.898356] systemd[1]: Starting udev Kernel Socket. |
| [ 16.912259] systemd[1]: Listening on udev Kernel Socket. |
| [ 16.918802] systemd[1]: Starting udev Control Socket. |
| [ 16.932254] systemd[1]: Listening on udev Control Socket. |
| [ 16.937818] systemd[1]: Starting Journal Socket. |
| [ 16.952247] systemd[1]: Listening on Journal Socket. |
| [ 16.957377] systemd[1]: Starting System Slice. |
| [ 16.972258] systemd[1]: Created slice System Slice. |
| [ 16.977254] systemd[1]: Starting system-getty.slice. |
| [ 16.992246] systemd[1]: Created slice system-getty.slice. |
| [ 16.997798] systemd[1]: Starting system-serial\x2dgetty.slice. |
| [ 17.012253] systemd[1]: Created slice system-serial\x2dgetty.slice. |
| [ 17.018676] systemd[1]: Starting Increase datagram queue length... |
| [ 17.037125] systemd[1]: Mounting Debug File System... |
| [ 17.053092] systemd[1]: Mounting POSIX Message Queue File System... |
| [ 17.259021] systemd[1]: Starting Load Kernel Modules... |
| [ 19.824455] systemd[1]: Started Set Up Additional Binary Formats. |
| [ 20.090450] systemd[1]: Starting Create list of required static device nodes for the current kernel... |
| [ 20.112358] systemd[1]: Starting udev Coldplug all Devices... |
| [ 20.128105] systemd[1]: Mounting Huge Pages File System... |
| [ 20.144139] systemd[1]: Starting Slices. |
| [ 20.159156] systemd[1]: Reached target Slices. |
| [ 20.163751] systemd[1]: Starting Remount Root and Kernel File Systems... |
| [ 20.191171] systemd[1]: Started Increase datagram queue length. |
| [ 20.200483] systemd[1]: Starting Syslog Socket. |
| [ 20.215179] systemd[1]: Listening on Syslog Socket. |
| [ 20.220322] systemd[1]: Starting Sockets. |
| [ 20.235126] systemd[1]: Reached target Sockets. |
| [ 20.239891] systemd[1]: Starting Journal Service... |
| [ 20.263132] systemd[1]: Started Journal Service. |
| [ 24.028259] systemd-udevd[191]: starting version 215 |
| [ 24.059417] systemd-journald[171]: Received request to flush runtime journal from PID 1 |
| [ 35.549214] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled |
| [ 35.557212] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled |
| [ 35.695473] EDAC MC: Ver: 3.0.0 |
| [ 35.775191] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 |
| [ 36.438439] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 |
| [ 36.447074] ACPI: Power Button [PWRB] |
| [ 36.450974] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 |
| [ 36.458503] ACPI: Power Button [PWRF] |
| [ 36.550130] MCE: In-kernel MCE decoding enabled. |
| [ 36.871848] SCSI subsystem initialized |
| [ 37.033200] FDC 0 is a post-1991 82077 |
| [ 37.092880] acpi-cpufreq: overriding BIOS provided _PSD data |
| [ 37.258404] AMD64 EDAC driver v3.4.0 |
| [ 37.262197] EDAC amd64: DRAM ECC enabled. |
| [ 37.266318] EDAC amd64: F10h detected (node 0). |
| [ 37.270966] EDAC MC: DCT0 chip selects: |
| [ 37.270969] EDAC amd64: MC: 0: 0MB 1: 0MB |
| [ 37.275795] EDAC amd64: MC: 2: 0MB 3: 0MB |
| [ 37.280596] EDAC amd64: MC: 4: 0MB 5: 0MB |
| [ 37.285392] EDAC amd64: MC: 6: 1024MB 7: 1024MB |
| [ 37.290192] EDAC MC: DCT1 chip selects: |
| [ 37.290195] EDAC amd64: MC: 0: 0MB 1: 0MB |
| [ 37.294992] EDAC amd64: MC: 2: 0MB 3: 0MB |
| [ 37.299783] EDAC amd64: MC: 4: 0MB 5: 0MB |
| [ 37.304572] EDAC amd64: MC: 6: 1024MB 7: 1024MB |
| [ 37.309375] EDAC amd64: using x4 syndromes. |
| [ 37.313656] EDAC amd64: MCT channel count: 2 |
| [ 37.318071] EDAC amd64: CS6: Registered DDR2 RAM |
| [ 37.322803] EDAC amd64: CS7: Registered DDR2 RAM |
| [ 37.327831] EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT) |
| [ 37.337683] EDAC amd64: DRAM ECC enabled. |
| [ 37.341849] EDAC amd64: F10h detected (node 1). |
| [ 37.346524] EDAC MC: DCT0 chip selects: |
| [ 37.346528] EDAC amd64: MC: 0: 1024MB 1: 0MB |
| [ 37.351327] EDAC amd64: MC: 2: 0MB 3: 0MB |
| [ 37.356129] EDAC amd64: MC: 4: 0MB 5: 0MB |
| [ 37.360933] EDAC amd64: MC: 6: 0MB 7: 0MB |
| [ 37.365736] EDAC MC: DCT1 chip selects: |
| [ 37.365738] EDAC amd64: MC: 0: 0MB 1: 0MB |
| [ 37.370540] EDAC amd64: MC: 2: 0MB 3: 0MB |
| [ 37.375342] EDAC amd64: MC: 4: 0MB 5: 0MB |
| [ 37.380141] EDAC amd64: MC: 6: 0MB 7: 0MB |
| [ 37.384928] EDAC amd64: using x4 syndromes. |
| [ 37.389216] EDAC amd64: MCT channel count: 1 |
| [ 37.393638] EDAC amd64: CS0: Registered DDR2 RAM |
| [ 37.398586] EDAC MC1: Giving out device to module amd64_edac controller F10h: DEV 0000:00:19.2 (INTERRUPT) |
| [ 37.408444] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED) |
| [ 37.447769] libata version 3.00 loaded. |
| [ 37.514192] i2c i2c-0: nForce2 SMBus adapter at 0x2c80 |
| [ 37.519599] i2c i2c-1: nForce2 SMBus adapter at 0x2cc0 |
| [ 37.556827] input: PC Speaker as /devices/platform/pcspkr/input/input4 |
| [ 37.681984] sata_nv 0000:00:07.0: version 3.5 |
| [ 37.682364] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21 |
| [ 37.689332] scsi0 : sata_nv |
| [ 37.692504] scsi1 : sata_nv |
| [ 37.695539] ata1: SATA max UDMA/133 cmd 0x3050 ctl 0x3070 bmdma 0x3030 irq 21 |
| [ 37.702801] ata2: SATA max UDMA/133 cmd 0x3058 ctl 0x3074 bmdma 0x3038 irq 21 |
| [ 37.710378] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20 |
| [ 37.717084] scsi2 : sata_nv |
| [ 37.720343] scsi3 : sata_nv |
| [ 37.723470] ata3: SATA max UDMA/133 cmd 0x3060 ctl 0x3078 bmdma 0x3040 irq 20 |
| [ 37.730692] ata4: SATA max UDMA/133 cmd 0x3068 ctl 0x307c bmdma 0x3048 irq 20 |
| [ 37.738006] pata_amd 0000:00:06.0: version 0.4.1 |
| [ 37.738910] scsi4 : pata_amd |
| [ 37.742188] scsi5 : pata_amd |
| [ 37.745277] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3020 irq 14 |
| [ 37.752366] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3028 irq 15 |
| [ 38.020935] ata1: SATA link down (SStatus 0 SControl 300) |
| [ 38.048931] ata3: SATA link down (SStatus 0 SControl 300) |
| [ 38.336824] ata2: SATA link down (SStatus 0 SControl 300) |
| [ 38.652719] ata4: SATA link down (SStatus 0 SControl 300) |
| [ 38.738861] kvm: Nested Virtualization enabled |
| [ 38.743474] kvm: Nested Paging enabled |
| [ 87.331604] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS***** |