| [ 0.000000] Linux version 4.19.0-6-amd64 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Debian 4.19.67-2+deb10u2 (2019-11-11) |
| [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-6-amd64 root=UUID=17ed7bcd-6b74-425d-baf6-c79db7db2a14 ro console=ttyS0,115200 earlyprint=serial,ttyS0,115200 initrd=http://ftp.nl.debian.org/debian/dists/stable/main/installer-amd64/current/images/netboot/debian-installer/amd64/initrd.gz quiet |
| [ 0.000000] x86/fpu: x87 FPU will use FXSAVE |
| [ 0.000000] BIOS-provided physical RAM map: |
| [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dfd44fff] usable |
| [ 0.000000] BIOS-e820: [mem 0x00000000dfd45000-0x00000000dfffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011effffff] usable |
| [ 0.000000] NX (Execute Disable) protection: active |
| [ 0.000000] SMBIOS 2.8 present. |
| [ 0.000000] DMI: PC Engines apu1/apu1, BIOS 4.11-268-gb6161be9de 12/03/2019 |
| [ 0.000000] tsc: Fast TSC calibration using PIT |
| [ 0.000000] tsc: Detected 1000.089 MHz processor |
| [ 0.001419] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| [ 0.001428] e820: remove [mem 0x000a0000-0x000fffff] usable |
| [ 0.001444] last_pfn = 0x11f000 max_arch_pfn = 0x400000000 |
| [ 0.001457] MTRR default type: uncachable |
| [ 0.001460] MTRR fixed ranges enabled: |
| [ 0.001465] 00000-9FFFF write-back |
| [ 0.001469] A0000-BFFFF uncachable |
| [ 0.001473] C0000-FFFFF write-back |
| [ 0.001475] MTRR variable ranges enabled: |
| [ 0.001481] 0 base 0FFE00000 mask FFFE00000 write-protect |
| [ 0.001486] 1 base 0C0000000 mask FE0000000 write-back |
| [ 0.001490] 2 base 080000000 mask FC0000000 write-back |
| [ 0.001494] 3 base 000000000 mask F80000000 write-back |
| [ 0.001496] 4 disabled |
| [ 0.001498] 5 disabled |
| [ 0.001500] 6 disabled |
| [ 0.001502] 7 disabled |
| [ 0.001506] TOM2: 000000011f000000 aka 4592M |
| [ 0.001758] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT |
| [ 0.001871] last_pfn = 0xdfd45 max_arch_pfn = 0x400000000 |
| [ 0.009833] found SMP MP-table at [mem 0x000f6080-0x000f608f] |
| [ 0.010158] Using GB pages for direct mapping |
| [ 0.010165] BRK [0x12201000, 0x12201fff] PGTABLE |
| [ 0.010171] BRK [0x12202000, 0x12202fff] PGTABLE |
| [ 0.010175] BRK [0x12203000, 0x12203fff] PGTABLE |
| [ 0.010269] BRK [0x12204000, 0x12204fff] PGTABLE |
| [ 0.010278] BRK [0x12205000, 0x12205fff] PGTABLE |
| [ 0.010455] BRK [0x12206000, 0x12206fff] PGTABLE |
| [ 0.010553] BRK [0x12207000, 0x12207fff] PGTABLE |
| [ 0.010853] RAMDISK: [mem 0x34ec9000-0x3675bfff] |
| [ 0.010915] ACPI: Early table checksum verification disabled |
| [ 0.011089] ACPI: RSDP 0x00000000000F6250 000024 (v02 COREv4) |
| [ 0.011101] ACPI: XSDT 0x00000000DFD480E0 00005C (v01 COREv4 COREBOOT 00000000 CORE 20180531) |
| [ 0.011120] ACPI: FACP 0x00000000DFD4A8C0 0000F4 (v04 COREv4 COREBOOT 00000000 CORE 20180531) |
| [ 0.011139] ACPI: DSDT 0x00000000DFD48280 002634 (v02 COREv4 COREBOOT 00010001 INTL 20180531) |
| [ 0.011151] ACPI: FACS 0x00000000DFD48240 000040 |
| [ 0.011160] ACPI: FACS 0x00000000DFD48240 000040 |
| [ 0.011169] ACPI: SSDT 0x00000000DFD4A9C0 0001EA (v02 COREv4 COREBOOT 0000002A CORE 20180531) |
| [ 0.011181] ACPI: APIC 0x00000000DFD4ABB0 00005C (v02 COREv4 COREBOOT 00000000 CORE 20180531) |
| [ 0.011191] ACPI: HEST 0x00000000DFD4AC10 000198 (v01 COREv4 COREBOOT 00000000 CORE 20180531) |
| [ 0.011202] ACPI: SSDT 0x00000000DFD4ADB0 00168E (v02 AMD ALIB 00000001 MSFT 04000000) |
| [ 0.011213] ACPI: SSDT 0x00000000DFD4C440 00030C (v01 AMD POWERNOW 00000001 AMD 00000001) |
| [ 0.011224] ACPI: HPET 0x00000000DFD4C750 000038 (v01 COREv4 COREBOOT 00000000 CORE 20180531) |
| [ 0.011250] ACPI: Local APIC address 0xfee00000 |
| [ 0.011578] No NUMA configuration found |
| [ 0.011582] Faking a node at [mem 0x0000000000000000-0x000000011effffff] |
| [ 0.011596] NODE_DATA(0) allocated [mem 0x11effb000-0x11effffff] |
| [ 0.011712] Zone ranges: |
| [ 0.011715] DMA [mem 0x0000000000001000-0x0000000000ffffff] |
| [ 0.011720] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] |
| [ 0.011724] Normal [mem 0x0000000100000000-0x000000011effffff] |
| [ 0.011728] Device empty |
| [ 0.011732] Movable zone start for each node |
| [ 0.011734] Early memory node ranges |
| [ 0.011737] node 0: [mem 0x0000000000001000-0x000000000009efff] |
| [ 0.011740] node 0: [mem 0x0000000000100000-0x00000000dfd44fff] |
| [ 0.011743] node 0: [mem 0x0000000100000000-0x000000011effffff] |
| [ 0.011756] Reserved but unavailable: 98 pages |
| [ 0.011762] Initmem setup node 0 [mem 0x0000000000001000-0x000000011effffff] |
| [ 0.011767] On node 0 totalpages: 1043683 |
| [ 0.011770] DMA zone: 64 pages used for memmap |
| [ 0.011773] DMA zone: 21 pages reserved |
| [ 0.011776] DMA zone: 3998 pages, LIFO batch:0 |
| [ 0.012213] DMA32 zone: 14262 pages used for memmap |
| [ 0.012216] DMA32 zone: 912709 pages, LIFO batch:63 |
| [ 0.108867] Normal zone: 1984 pages used for memmap |
| [ 0.108871] Normal zone: 126976 pages, LIFO batch:31 |
| [ 0.122374] ACPI: PM-Timer IO Port: 0x808 |
| [ 0.122383] ACPI: Local APIC address 0xfee00000 |
| [ 0.122462] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 |
| [ 0.122469] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) |
| [ 0.122476] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) |
| [ 0.122480] ACPI: IRQ0 used by override. |
| [ 0.122484] ACPI: IRQ9 used by override. |
| [ 0.122490] Using ACPI (MADT) for SMP configuration information |
| [ 0.122495] ACPI: HPET id: 0x43538210 base: 0xfed00000 |
| [ 0.122508] smpboot: Allowing 2 CPUs, 0 hotplug CPUs |
| [ 0.122546] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] |
| [ 0.122552] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] |
| [ 0.122555] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] |
| [ 0.122558] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] |
| [ 0.122562] PM: Registered nosave memory: [mem 0xdfd45000-0xdfffffff] |
| [ 0.122565] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff] |
| [ 0.122567] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] |
| [ 0.122569] PM: Registered nosave memory: [mem 0xfc000000-0xfed3ffff] |
| [ 0.122572] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff] |
| [ 0.122574] PM: Registered nosave memory: [mem 0xfed45000-0xffffffff] |
| [ 0.122581] [mem 0xe0000000-0xf7ffffff] available for PCI devices |
| [ 0.122583] Booting paravirtualized kernel on bare hardware |
| [ 0.122592] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns |
| [ 0.569556] random: get_random_bytes called from start_kernel+0x93/0x52c with crng_init=0 |
| [ 0.569586] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1 |
| [ 0.571222] percpu: Embedded 45 pages/cpu s144408 r8192 d31720 u1048576 |
| [ 0.571248] pcpu-alloc: s144408 r8192 d31720 u1048576 alloc=1*2097152 |
| [ 0.571253] pcpu-alloc: [0] 0 1 |
| [ 0.571323] Built 1 zonelists, mobility grouping on. Total pages: 1027352 |
| [ 0.571326] Policy zone: Normal |
| [ 0.571334] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-6-amd64 root=UUID=17ed7bcd-6b74-425d-baf6-c79db7db2a14 ro console=ttyS0,115200 earlyprint=serial,ttyS0,115200 initrd=http://ftp.nl.debian.org/debian/dists/stable/main/installer-amd64/current/images/netboot/debian-installer/amd64/initrd.gz quiet |
| [ 0.616601] Calgary: detecting Calgary via BIOS EBDA area |
| [ 0.616609] Calgary: Unable to locate Rio Grande table in EBDA - bailing! |
| [ 0.682896] Memory: 3992864K/4174732K available (10252K kernel code, 1243K rwdata, 3324K rodata, 1584K init, 2280K bss, 181868K reserved, 0K cma-reserved) |
| [ 0.683355] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 |
| [ 0.683383] ftrace: allocating 31872 entries in 125 pages |
| [ 0.722658] rcu: Hierarchical RCU implementation. |
| [ 0.722666] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2. |
| [ 0.722670] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 |
| [ 0.735458] NR_IRQS: 33024, nr_irqs: 440, preallocated irqs: 16 |
| [ 0.736044] spurious 8259A interrupt: IRQ7. |
| [ 0.736472] Console: colour dummy device 80x25 |
| [ 0.736562] console [ttyS0] enabled |
| [ 0.736643] ACPI: Core revision 20180810 |
| [ 0.737186] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns |
| [ 0.737211] hpet clockevent registered |
| [ 0.737223] APIC: Switch to symmetric I/O mode setup |
| [ 0.737759] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 |
| [ 0.757268] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0xe6a6b29a9f, max_idle_ns: 440795230319 ns |
| [ 0.757302] Calibrating delay loop (skipped), value calculated using timer frequency.. 2000.17 BogoMIPS (lpj=4000356) |
| [ 0.757311] pid_max: default: 32768 minimum: 301 |
| [ 0.757441] Security Framework initialized |
| [ 0.757446] Yama: disabled by default; enable with sysctl kernel.yama.* |
| [ 0.757513] AppArmor: AppArmor initialized |
| [ 0.760788] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) |
| [ 0.762518] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) |
| [ 0.762656] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) |
| [ 0.762715] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) |
| [ 0.763468] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4 |
| [ 0.763473] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0 |
| [ 0.763478] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization |
| [ 0.763486] Spectre V2 : Mitigation: Full AMD retpoline |
| [ 0.763488] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch |
| [ 0.763490] Speculative Store Bypass: Vulnerable |
| [ 0.763927] Freeing SMP alternatives memory: 24K |
| [ 0.769273] smpboot: CPU0: AMD G-T40E Processor (family: 0x14, model: 0x2, stepping: 0x0) |
| [ 0.769273] Performance Events: AMD PMU driver. |
| [ 0.769273] ... version: 0 |
| [ 0.769273] ... bit width: 48 |
| [ 0.769273] ... generic registers: 4 |
| [ 0.769273] ... value mask: 0000ffffffffffff |
| [ 0.769273] ... max period: 00007fffffffffff |
| [ 0.769273] ... fixed-purpose events: 0 |
| [ 0.769273] ... event mask: 000000000000000f |
| [ 0.769273] rcu: Hierarchical SRCU implementation. |
| [ 0.769273] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. |
| [ 0.769273] smp: Bringing up secondary CPUs ... |
| [ 0.769273] x86: Booting SMP configuration: |
| [ 0.769273] .... node #0, CPUs: #1 |
| [ 0.005334] do_IRQ: 1.55 No irq handler for vector |
| [ 0.773457] smp: Brought up 1 node, 2 CPUs |
| [ 0.773457] smpboot: Max logical packages: 1 |
| [ 0.773457] smpboot: Total of 2 processors activated (4000.35 BogoMIPS) |
| [ 0.774469] devtmpfs: initialized |
| [ 0.774469] x86/mm: Memory block size: 128MB |
| [ 0.777651] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns |
| [ 0.777688] futex hash table entries: 512 (order: 3, 32768 bytes) |
| [ 0.777901] pinctrl core: initialized pinctrl subsystem |
| [ 0.778499] NET: Registered protocol family 16 |
| [ 0.778812] audit: initializing netlink subsys (disabled) |
| [ 0.778866] audit: type=2000 audit(1575457843.040:1): state=initialized audit_enabled=0 res=1 |
| [ 0.781656] cpuidle: using governor ladder |
| [ 0.781672] cpuidle: using governor menu |
| [ 0.781769] ACPI: bus type PCI registered |
| [ 0.781769] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 |
| [ 0.781769] PCI: Using configuration type 1 for base access |
| [ 0.781769] PCI: Using configuration type 1 for extended access |
| [ 0.781877] mtrr: your CPUs had inconsistent variable MTRR settings |
| [ 0.781877] mtrr: probably your BIOS does not setup all CPUs. |
| [ 0.781877] mtrr: corrected configuration. |
| [ 0.785502] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages |
| [ 0.785502] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages |
| [ 0.785607] ACPI: Added _OSI(Module Device) |
| [ 0.785611] ACPI: Added _OSI(Processor Device) |
| [ 0.785613] ACPI: Added _OSI(3.0 _SCP Extensions) |
| [ 0.785617] ACPI: Added _OSI(Processor Aggregator Device) |
| [ 0.785620] ACPI: Added _OSI(Linux-Dell-Video) |
| [ 0.785624] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) |
| [ 0.796147] ACPI: 4 ACPI AML tables successfully acquired and loaded |
| [ 0.799986] ACPI: Interpreter enabled |
| [ 0.800049] ACPI: (supports S0 S1 S3 S4 S5) |
| [ 0.800054] ACPI: Using IOAPIC for interrupt routing |
| [ 0.800108] HEST: Table parsing has been initialized. |
| [ 0.800117] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| [ 0.800603] ACPI: Enabled 18 GPEs in block 00 to 1F |
| [ 0.811434] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) |
| [ 0.811452] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] |
| [ 0.811605] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] |
| [ 0.812475] PCI host bridge to bus 0000:00 |
| [ 0.812483] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] |
| [ 0.812488] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] |
| [ 0.812493] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] |
| [ 0.812498] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff] |
| [ 0.812504] pci_bus 0000:00: root bus resource [bus 00-ff] |
| [ 0.812526] pci 0000:00:00.0: [1022:1510] type 00 class 0x060000 |
| [ 0.812903] pci 0000:00:04.0: [1022:1512] type 01 class 0x060400 |
| [ 0.812960] pci 0000:00:04.0: enabling Extended Tags |
| [ 0.813034] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold |
| [ 0.813348] pci 0000:00:05.0: [1022:1513] type 01 class 0x060400 |
| [ 0.813402] pci 0000:00:05.0: enabling Extended Tags |
| [ 0.813470] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold |
| [ 0.813749] pci 0000:00:06.0: [1022:1514] type 01 class 0x060400 |
| [ 0.813803] pci 0000:00:06.0: enabling Extended Tags |
| [ 0.813870] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold |
| [ 0.814220] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601 |
| [ 0.814258] pci 0000:00:11.0: reg 0x10: [io 0x4010-0x4017] |
| [ 0.814274] pci 0000:00:11.0: reg 0x14: [io 0x4020-0x4023] |
| [ 0.814290] pci 0000:00:11.0: reg 0x18: [io 0x4018-0x401f] |
| [ 0.814305] pci 0000:00:11.0: reg 0x1c: [io 0x4024-0x4027] |
| [ 0.814321] pci 0000:00:11.0: reg 0x20: [io 0x4000-0x400f] |
| [ 0.814337] pci 0000:00:11.0: reg 0x24: [mem 0xf7f03000-0xf7f033ff] |
| [ 0.814687] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 |
| [ 0.814718] pci 0000:00:12.0: reg 0x10: [mem 0xf7f00000-0xf7f00fff] |
| [ 0.815108] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 |
| [ 0.815143] pci 0000:00:12.2: reg 0x10: [mem 0xf7f04000-0xf7f040ff] |
| [ 0.815270] pci 0000:00:12.2: supports D1 D2 |
| [ 0.815274] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot |
| [ 0.815586] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 |
| [ 0.815617] pci 0000:00:13.0: reg 0x10: [mem 0xf7f01000-0xf7f01fff] |
| [ 0.816002] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 |
| [ 0.816037] pci 0000:00:13.2: reg 0x10: [mem 0xf7f05000-0xf7f050ff] |
| [ 0.816164] pci 0000:00:13.2: supports D1 D2 |
| [ 0.816168] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot |
| [ 0.816480] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 |
| [ 0.816874] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 |
| [ 0.817289] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 |
| [ 0.817663] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310 |
| [ 0.817695] pci 0000:00:16.0: reg 0x10: [mem 0xf7f02000-0xf7f02fff] |
| [ 0.818078] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320 |
| [ 0.818114] pci 0000:00:16.2: reg 0x10: [mem 0xf7f06000-0xf7f060ff] |
| [ 0.818241] pci 0000:00:16.2: supports D1 D2 |
| [ 0.818245] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot |
| [ 0.818560] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000 |
| [ 0.818844] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000 |
| [ 0.819115] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000 |
| [ 0.819391] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000 |
| [ 0.819674] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000 |
| [ 0.819951] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000 |
| [ 0.820231] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000 |
| [ 0.820503] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000 |
| [ 0.820949] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000 |
| [ 0.820989] pci 0000:01:00.0: reg 0x10: [io 0x1000-0x10ff] |
| [ 0.821024] pci 0000:01:00.0: reg 0x18: [mem 0xf7a00000-0xf7a00fff 64bit] |
| [ 0.821047] pci 0000:01:00.0: reg 0x20: [mem 0xf7900000-0xf7903fff 64bit pref] |
| [ 0.821178] pci 0000:01:00.0: supports D1 D2 |
| [ 0.821182] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.833385] pci 0000:00:04.0: PCI bridge to [bus 01] |
| [ 0.833401] pci 0000:00:04.0: bridge window [io 0x1000-0x1fff] |
| [ 0.833409] pci 0000:00:04.0: bridge window [mem 0xf7a00000-0xf7afffff] |
| [ 0.833419] pci 0000:00:04.0: bridge window [mem 0xf7900000-0xf79fffff 64bit pref] |
| [ 0.833621] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 |
| [ 0.833664] pci 0000:02:00.0: reg 0x10: [io 0x2000-0x20ff] |
| [ 0.833700] pci 0000:02:00.0: reg 0x18: [mem 0xf7c00000-0xf7c00fff 64bit] |
| [ 0.833723] pci 0000:02:00.0: reg 0x20: [mem 0xf7b00000-0xf7b03fff 64bit pref] |
| [ 0.833872] pci 0000:02:00.0: supports D1 D2 |
| [ 0.833877] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.845385] pci 0000:00:05.0: PCI bridge to [bus 02] |
| [ 0.845401] pci 0000:00:05.0: bridge window [io 0x2000-0x2fff] |
| [ 0.845409] pci 0000:00:05.0: bridge window [mem 0xf7c00000-0xf7cfffff] |
| [ 0.845418] pci 0000:00:05.0: bridge window [mem 0xf7b00000-0xf7bfffff 64bit pref] |
| [ 0.845631] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000 |
| [ 0.845675] pci 0000:03:00.0: reg 0x10: [io 0x3000-0x30ff] |
| [ 0.845710] pci 0000:03:00.0: reg 0x18: [mem 0xf7e00000-0xf7e00fff 64bit] |
| [ 0.845733] pci 0000:03:00.0: reg 0x20: [mem 0xf7d00000-0xf7d03fff 64bit pref] |
| [ 0.845883] pci 0000:03:00.0: supports D1 D2 |
| [ 0.845887] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.857385] pci 0000:00:06.0: PCI bridge to [bus 03] |
| [ 0.857401] pci 0000:00:06.0: bridge window [io 0x3000-0x3fff] |
| [ 0.857409] pci 0000:00:06.0: bridge window [mem 0xf7e00000-0xf7efffff] |
| [ 0.857419] pci 0000:00:06.0: bridge window [mem 0xf7d00000-0xf7dfffff 64bit pref] |
| [ 0.857506] pci_bus 0000:04: extended config space not accessible |
| [ 0.857720] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode) |
| [ 0.857737] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) |
| [ 0.857742] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) |
| [ 0.857747] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) |
| [ 0.857751] pci 0000:00:14.4: bridge window [mem 0xe0000000-0xffffffff] (subtractive decode) |
| [ 0.859311] ACPI: PCI Interrupt Link [INTA] (IRQs 3 4 5 7 *10 11 12 15) |
| [ 0.859577] ACPI: PCI Interrupt Link [INTB] (IRQs 3 4 5 7 10 *11 12 15) |
| [ 0.859835] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 5 7 *10 11 12 15) |
| [ 0.860099] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 7 10 *11 12 15) |
| [ 0.860355] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 *10 11 12 15) |
| [ 0.860611] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *11 |
| [ 0.860860] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 *10 11 12 15) |
| [ 0.861295] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 *11 12 15) |
| [ 0.861875] vgaarb: loaded |
| [ 0.861875] pps_core: LinuxPPS API ver. 1 registered |
| [ 0.861875] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> |
| [ 0.861875] PTP clock support registered |
| [ 0.861875] EDAC MC: Ver: 3.0.0 |
| [ 0.862109] PCI: Using ACPI for IRQ routing |
| [ 0.862109] PCI: pci_cache_line_size set to 64 bytes |
| [ 0.862109] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] |
| [ 0.862109] e820: reserve RAM buffer [mem 0xdfd45000-0xdfffffff] |
| [ 0.862109] e820: reserve RAM buffer [mem 0x11f000000-0x11fffffff] |
| [ 0.862109] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 |
| [ 0.862109] hpet0: 3 comparators, 32-bit 14.318180 MHz counter |
| [ 0.865302] clocksource: Switched to clocksource tsc-early |
| [ 0.905628] VFS: Disk quotas dquot_6.6.0 |
| [ 0.905710] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) |
| [ 0.906121] AppArmor: AppArmor Filesystem Enabled |
| [ 0.906191] pnp: PnP ACPI init |
| [ 0.906909] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) |
| [ 0.907349] pnp: PnP ACPI: found 1 devices |
| [ 0.920883] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns |
| [ 0.921013] pci 0000:00:04.0: PCI bridge to [bus 01] |
| [ 0.921022] pci 0000:00:04.0: bridge window [io 0x1000-0x1fff] |
| [ 0.921030] pci 0000:00:04.0: bridge window [mem 0xf7a00000-0xf7afffff] |
| [ 0.921038] pci 0000:00:04.0: bridge window [mem 0xf7900000-0xf79fffff 64bit pref] |
| [ 0.921047] pci 0000:00:05.0: PCI bridge to [bus 02] |
| [ 0.921052] pci 0000:00:05.0: bridge window [io 0x2000-0x2fff] |
| [ 0.921060] pci 0000:00:05.0: bridge window [mem 0xf7c00000-0xf7cfffff] |
| [ 0.921066] pci 0000:00:05.0: bridge window [mem 0xf7b00000-0xf7bfffff 64bit pref] |
| [ 0.921076] pci 0000:00:06.0: PCI bridge to [bus 03] |
| [ 0.921081] pci 0000:00:06.0: bridge window [io 0x3000-0x3fff] |
| [ 0.921087] pci 0000:00:06.0: bridge window [mem 0xf7e00000-0xf7efffff] |
| [ 0.921093] pci 0000:00:06.0: bridge window [mem 0xf7d00000-0xf7dfffff 64bit pref] |
| [ 0.921104] pci 0000:00:14.4: PCI bridge to [bus 04] |
| [ 0.921176] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] |
| [ 0.921180] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] |
| [ 0.921185] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] |
| [ 0.921189] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xffffffff] |
| [ 0.921194] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] |
| [ 0.921198] pci_bus 0000:01: resource 1 [mem 0xf7a00000-0xf7afffff] |
| [ 0.921202] pci_bus 0000:01: resource 2 [mem 0xf7900000-0xf79fffff 64bit pref] |
| [ 0.921207] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] |
| [ 0.921211] pci_bus 0000:02: resource 1 [mem 0xf7c00000-0xf7cfffff] |
| [ 0.921215] pci_bus 0000:02: resource 2 [mem 0xf7b00000-0xf7bfffff 64bit pref] |
| [ 0.921220] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff] |
| [ 0.921224] pci_bus 0000:03: resource 1 [mem 0xf7e00000-0xf7efffff] |
| [ 0.921228] pci_bus 0000:03: resource 2 [mem 0xf7d00000-0xf7dfffff 64bit pref] |
| [ 0.921233] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window] |
| [ 0.921238] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window] |
| [ 0.921242] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff] |
| [ 0.921246] pci_bus 0000:04: resource 7 [mem 0xe0000000-0xffffffff] |
| [ 0.921468] NET: Registered protocol family 2 |
| [ 0.922339] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes) |
| [ 0.922421] TCP established hash table entries: 32768 (order: 6, 262144 bytes) |
| [ 0.922673] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) |
| [ 0.923048] TCP: Hash tables configured (established 32768 bind 32768) |
| [ 0.923280] UDP hash table entries: 2048 (order: 4, 65536 bytes) |
| [ 0.923354] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) |
| [ 0.923609] NET: Registered protocol family 1 |
| [ 0.923630] NET: Registered protocol family 44 |
| [ 0.927256] PCI: CLS 64 bytes, default 64 |
| [ 0.927411] Unpacking initramfs... |
| [ 2.410169] Freeing initrd memory: 25164K |
| [ 2.410362] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) |
| [ 2.410386] software IO TLB: mapped [mem 0xdbd45000-0xdfd45000] (64MB) |
| [ 2.410480] LVT offset 0 assigned for vector 0x400 |
| [ 2.410709] perf: AMD IBS detected (0x000000ff) |
| [ 2.412934] Initialise system trusted keyrings |
| [ 2.412965] Key type blacklist registered |
| [ 2.413422] workingset: timestamp_bits=40 max_order=20 bucket_order=0 |
| [ 2.418507] zbud: loaded |
| [ 3.252791] Key type asymmetric registered |
| [ 3.252798] Asymmetric key parser 'x509' registered |
| [ 3.252848] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) |
| [ 3.253005] io scheduler noop registered |
| [ 3.253008] io scheduler deadline registered |
| [ 3.253148] io scheduler cfq registered (default) |
| [ 3.253152] io scheduler mq-deadline registered |
| [ 3.255142] pcieport 0000:00:04.0: Signaling PME with IRQ 24 |
| [ 3.255202] pcieport 0000:00:05.0: Signaling PME with IRQ 25 |
| [ 3.255256] pcieport 0000:00:06.0: Signaling PME with IRQ 26 |
| [ 3.255343] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 |
| [ 3.256007] GHES: Failed to enable APEI firmware first mode. |
| [ 3.256431] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
| [ 3.277313] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A |
| [ 3.298429] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A |
| [ 3.300523] Linux agpgart interface v0.103 |
| [ 3.301205] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de> |
| [ 3.301207] AMD IOMMUv2 functionality not available on this system |
| [ 3.302025] i8042: PNP: No PS/2 controller found. |
| [ 3.302027] i8042: Probing ports directly. |
| [ 3.425463] tsc: Refined TSC clocksource calibration: 999.999 MHz |
| [ 3.425484] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1cd42c7a813, max_idle_ns: 881590565951 ns |
| [ 5.256994] i8042: No controller found |
| [ 5.257025] clocksource: Switched to clocksource tsc |
| [ 5.257818] mousedev: PS/2 mouse device common for all mice |
| [ 5.258024] rtc_cmos 00:00: RTC can wake from S4 |
| [ 5.258513] rtc_cmos 00:00: registered as rtc0 |
| [ 5.258570] rtc_cmos 00:00: alarms up to one day, 114 bytes nvram, hpet irqs |
| [ 5.258777] ledtrig-cpu: registered to indicate activity on CPUs |
| [ 5.259706] NET: Registered protocol family 10 |
| [ 5.292130] Segment Routing with IPv6 |
| [ 5.292204] mip6: Mobile IPv6 |
| [ 5.292213] NET: Registered protocol family 17 |
| [ 5.292764] mpls_gso: MPLS GSO support |
| [ 5.293359] mce: Using 6 MCE banks |
| [ 5.293484] microcode: CPU0: patch_level=0x05000119 |
| [ 5.293563] microcode: CPU1: patch_level=0x05000119 |
| [ 5.293826] microcode: Microcode Update Driver: v2.2. |
| [ 5.293861] sched_clock: Marking stable (5292472172, 1334720)->(5403310839, -109503947) |
| [ 5.294654] registered taskstats version 1 |
| [ 5.294658] Loading compiled-in X.509 certificates |
| [ 5.485871] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' |
| [ 5.485968] Loaded X.509 cert 'Debian Secure Boot Signer: 00a7468def' |
| [ 5.486060] zswap: loaded using pool lzo/zbud |
| [ 5.486342] AppArmor: AppArmor sha1 policy hashing enabled |
| [ 5.487444] rtc_cmos 00:00: setting system clock to 2019-12-04 11:10:48 UTC (1575457848) |
| [ 5.495073] Freeing unused kernel image memory: 1584K |
| [ 5.509592] Write protecting the kernel read-only data: 16384k |
| [ 5.512377] Freeing unused kernel image memory: 2028K |
| [ 5.513218] Freeing unused kernel image memory: 772K |
| [ 5.543746] x86/mm: Checked W+X mappings: passed, no W+X pages found. |
| [ 5.543769] Run /init as init process |
| [ 5.900732] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 |
| [ 5.900747] piix4_smbus 0000:00:14.0: Using register 0x2c for SMBus port selection |
| [ 5.901132] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20 |
| [ 5.933607] libphy: r8169: probed |
| [ 5.934453] r8169 0000:01:00.0 eth0: RTL8168e/8111e, 00:0d:b9:46:15:70, XID 2c200000, IRQ 27 |
| [ 5.934460] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] |
| [ 5.977108] libphy: r8169: probed |
| [ 5.977953] r8169 0000:02:00.0 eth1: RTL8168e/8111e, 00:0d:b9:46:15:71, XID 2c200000, IRQ 28 |
| [ 5.977959] r8169 0000:02:00.0 eth1: jumbo features [frames: 9200 bytes, tx checksumming: ko] |
| [ 5.980751] SCSI subsystem initialized |
| [ 6.025409] libphy: r8169: probed |
| [ 6.026264] r8169 0000:03:00.0 eth2: RTL8168e/8111e, 00:0d:b9:46:15:72, XID 2c200000, IRQ 29 |
| [ 6.026271] r8169 0000:03:00.0 eth2: jumbo features [frames: 9200 bytes, tx checksumming: ko] |
| [ 6.037943] ACPI: bus type USB registered |
| [ 6.038030] usbcore: registered new interface driver usbfs |
| [ 6.038064] usbcore: registered new interface driver hub |
| [ 6.038149] usbcore: registered new device driver usb |
| [ 6.086942] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| [ 6.096425] ehci-pci: EHCI PCI platform driver |
| [ 6.096918] QUIRK: Enable AMD PLL fix |
| [ 6.097028] ehci-pci 0000:00:12.2: EHCI Host Controller |
| [ 6.097050] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 |
| [ 6.097067] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround |
| [ 6.097130] ehci-pci 0000:00:12.2: debug port 1 |
| [ 6.097254] ehci-pci 0000:00:12.2: irq 17, io mem 0xf7f04000 |
| [ 6.108241] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver |
| [ 6.109453] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 |
| [ 6.109743] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 |
| [ 6.109749] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 6.109754] usb usb1: Product: EHCI Host Controller |
| [ 6.109758] usb usb1: Manufacturer: Linux 4.19.0-6-amd64 ehci_hcd |
| [ 6.109762] usb usb1: SerialNumber: 0000:00:12.2 |
| [ 6.110215] hub 1-0:1.0: USB hub found |
| [ 6.110244] hub 1-0:1.0: 5 ports detected |
| [ 6.112123] ehci-pci 0000:00:13.2: EHCI Host Controller |
| [ 6.112152] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 |
| [ 6.112168] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround |
| [ 6.112231] ehci-pci 0000:00:13.2: debug port 1 |
| [ 6.112312] ehci-pci 0000:00:13.2: irq 17, io mem 0xf7f05000 |
| [ 6.125894] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 |
| [ 6.126136] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 |
| [ 6.126142] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 6.126146] usb usb2: Product: EHCI Host Controller |
| [ 6.126150] usb usb2: Manufacturer: Linux 4.19.0-6-amd64 ehci_hcd |
| [ 6.126154] usb usb2: SerialNumber: 0000:00:13.2 |
| [ 6.126588] hub 2-0:1.0: USB hub found |
| [ 6.126617] hub 2-0:1.0: 5 ports detected |
| [ 6.127661] ehci-pci 0000:00:16.2: EHCI Host Controller |
| [ 6.127681] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3 |
| [ 6.127693] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround |
| [ 6.127757] ehci-pci 0000:00:16.2: debug port 1 |
| [ 6.127836] ehci-pci 0000:00:16.2: irq 17, io mem 0xf7f06000 |
| [ 6.129485] libata version 3.00 loaded. |
| [ 6.142012] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00 |
| [ 6.142284] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 |
| [ 6.142290] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 6.142295] usb usb3: Product: EHCI Host Controller |
| [ 6.142299] usb usb3: Manufacturer: Linux 4.19.0-6-amd64 ehci_hcd |
| [ 6.142303] usb usb3: SerialNumber: 0000:00:16.2 |
| [ 6.142749] hub 3-0:1.0: USB hub found |
| [ 6.142778] hub 3-0:1.0: 4 ports detected |
| [ 6.146717] ohci-pci: OHCI PCI platform driver |
| [ 6.147207] ohci-pci 0000:00:12.0: OHCI PCI host controller |
| [ 6.147229] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4 |
| [ 6.147395] ohci-pci 0000:00:12.0: irq 18, io mem 0xf7f00000 |
| [ 6.154487] ahci 0000:00:11.0: version 3.0 |
| [ 6.155270] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode |
| [ 6.155278] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part |
| [ 6.160039] r8169 0000:01:00.0 enp1s0: renamed from eth0 |
| [ 6.160204] scsi host0: ahci |
| [ 6.160916] scsi host1: ahci |
| [ 6.161566] scsi host2: ahci |
| [ 6.162136] scsi host3: ahci |
| [ 6.162677] scsi host4: ahci |
| [ 6.163227] scsi host5: ahci |
| [ 6.163614] ata1: SATA max UDMA/133 abar m1024@0xf7f03000 port 0xf7f03100 irq 19 |
| [ 6.163621] ata2: SATA max UDMA/133 abar m1024@0xf7f03000 port 0xf7f03180 irq 19 |
| [ 6.163626] ata3: SATA max UDMA/133 abar m1024@0xf7f03000 port 0xf7f03200 irq 19 |
| [ 6.163631] ata4: SATA max UDMA/133 abar m1024@0xf7f03000 port 0xf7f03280 irq 19 |
| [ 6.163636] ata5: SATA max UDMA/133 abar m1024@0xf7f03000 port 0xf7f03300 irq 19 |
| [ 6.163640] ata6: SATA max UDMA/133 abar m1024@0xf7f03000 port 0xf7f03380 irq 19 |
| [ 6.174552] r8169 0000:02:00.0 enp2s0: renamed from eth1 |
| [ 6.194717] r8169 0000:03:00.0 enp3s0: renamed from eth2 |
| [ 6.214279] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 |
| [ 6.214289] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 6.214293] usb usb4: Product: OHCI PCI host controller |
| [ 6.214297] usb usb4: Manufacturer: Linux 4.19.0-6-amd64 ohci_hcd |
| [ 6.214301] usb usb4: SerialNumber: 0000:00:12.0 |
| [ 6.217966] hub 4-0:1.0: USB hub found |
| [ 6.218045] hub 4-0:1.0: 5 ports detected |
| [ 6.219453] ohci-pci 0000:00:13.0: OHCI PCI host controller |
| [ 6.219474] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 |
| [ 6.219593] ohci-pci 0000:00:13.0: irq 18, io mem 0xf7f01000 |
| [ 6.281769] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 |
| [ 6.281778] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 6.281782] usb usb5: Product: OHCI PCI host controller |
| [ 6.281786] usb usb5: Manufacturer: Linux 4.19.0-6-amd64 ohci_hcd |
| [ 6.281790] usb usb5: SerialNumber: 0000:00:13.0 |
| [ 6.282611] hub 5-0:1.0: USB hub found |
| [ 6.282653] hub 5-0:1.0: 5 ports detected |
| [ 6.283666] ohci-pci 0000:00:16.0: OHCI PCI host controller |
| [ 6.283685] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 6 |
| [ 6.283757] ohci-pci 0000:00:16.0: irq 18, io mem 0xf7f02000 |
| [ 6.345785] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19 |
| [ 6.345794] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 6.345799] usb usb6: Product: OHCI PCI host controller |
| [ 6.345803] usb usb6: Manufacturer: Linux 4.19.0-6-amd64 ohci_hcd |
| [ 6.345806] usb usb6: SerialNumber: 0000:00:16.0 |
| [ 6.346654] hub 6-0:1.0: USB hub found |
| [ 6.346686] hub 6-0:1.0: 4 ports detected |
| [ 6.477583] usb 3-1: new high-speed USB device number 2 using ehci-pci |
| [ 6.486964] ata3: SATA link down (SStatus 0 SControl 300) |
| [ 6.487028] ata4: SATA link down (SStatus 0 SControl 300) |
| [ 6.487076] ata5: SATA link down (SStatus 0 SControl 300) |
| [ 6.487110] ata6: SATA link down (SStatus 0 SControl 300) |
| [ 6.487149] ata2: SATA link down (SStatus 0 SControl 300) |
| [ 6.636699] usb 3-1: New USB device found, idVendor=058f, idProduct=6366, bcdDevice= 1.00 |
| [ 6.636710] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [ 6.636715] usb 3-1: Product: Flash Card Reader/Writer |
| [ 6.636720] usb 3-1: Manufacturer: Generic |
| [ 6.636725] usb 3-1: SerialNumber: 058F63666485 |
| [ 6.641485] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [ 6.641926] ata1.00: ATA-11: SATA SSD, SBFM01.2, max UDMA/133 |
| [ 6.641934] ata1.00: 58626288 sectors, multi 16: LBA48 NCQ (depth 32), AA |
| [ 6.642274] ata1.00: configured for UDMA/133 |
| [ 6.647328] scsi 0:0:0:0: Direct-Access ATA SATA SSD 01.2 PQ: 0 ANSI: 5 |
| [ 6.665896] usb-storage 3-1:1.0: USB Mass Storage device detected |
| [ 6.667492] scsi host6: usb-storage 3-1:1.0 |
| [ 6.667870] usbcore: registered new interface driver usb-storage |
| [ 6.674207] usbcore: registered new interface driver uas |
| [ 6.686860] sd 0:0:0:0: [sda] 58626288 512-byte logical blocks: (30.0 GB/28.0 GiB) |
| [ 6.686890] sd 0:0:0:0: [sda] Write Protect is off |
| [ 6.686895] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 |
| [ 6.686933] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 6.689445] sda: sda1 sda2 < sda5 > |
| [ 6.691509] sd 0:0:0:0: [sda] Attached SCSI disk |
| [ 6.833403] PM: Image not found (code -22) |
| [ 6.969241] cryptd: max_cpu_qlen set to 1000 |
| [ 7.243524] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) |
| [ 7.295348] random: fast init done |
| [ 7.578823] systemd[1]: Inserted module 'autofs4' |
| [ 7.636689] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) |
| [ 7.653879] systemd[1]: Detected architecture x86-64. |
| [ 7.659928] systemd[1]: Set hostname to <debian>. |
| [ 7.661529] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument |
| [ 7.682753] scsi 6:0:0:0: Direct-Access Multiple Card Reader 1.00 PQ: 0 ANSI: 4 |
| [ 7.686237] sd 6:0:0:0: [sdb] Attached SCSI removable disk |
| [ 8.067403] random: systemd: uninitialized urandom read (16 bytes read) |
| [ 8.071624] random: systemd: uninitialized urandom read (16 bytes read) |
| [ 8.074915] systemd[1]: Created slice system-getty.slice. |
| [ 8.075130] random: systemd: uninitialized urandom read (16 bytes read) |
| [ 8.075640] systemd[1]: Listening on udev Control Socket. |
| [ 8.075938] systemd[1]: Listening on udev Kernel Socket. |
| [ 8.076153] systemd[1]: Listening on initctl Compatibility Named Pipe. |
| [ 8.076673] systemd[1]: Listening on Journal Socket. |
| [ 8.079932] systemd[1]: Mounting Kernel Debug File System... |
| [ 8.234694] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro |
| [ 8.698752] audit: type=1400 audit(1575457851.707:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=232 comm="apparmor_parser" |
| [ 8.698767] audit: type=1400 audit(1575457851.707:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=232 comm="apparmor_parser" |
| [ 8.701426] audit: type=1400 audit(1575457851.707:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=233 comm="apparmor_parser" |
| [ 8.701441] audit: type=1400 audit(1575457851.707:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=233 comm="apparmor_parser" |
| [ 8.701449] audit: type=1400 audit(1575457851.707:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=233 comm="apparmor_parser" |
| [ 8.756959] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 |
| [ 8.768650] ACPI: Power Button [PWRF] |
| [ 8.770971] acpi_cpufreq: overriding BIOS provided _PSD data |
| [ 8.824440] systemd-journald[203]: Received request to flush runtime journal from PID 1 |
| [ 8.915571] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver |
| [ 8.915873] sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address |
| [ 8.918724] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0) |
| [ 8.971999] sd 0:0:0:0: Attached scsi generic sg0 type 0 |
| [ 8.983213] sd 6:0:0:0: Attached scsi generic sg1 type 0 |
| [ 9.024002] input: PC Speaker as /devices/platform/pcspkr/input/input1 |
| [ 9.526940] kvm: Nested Virtualization enabled |
| [ 9.526951] kvm: Nested Paging enabled |
| [ 9.722887] Adding 4174844k swap on /dev/sda5. Priority:-2 extents:1 across:4174844k SSFS |
| [ 9.847255] r8169 0000:01:00.0: firmware: failed to load rtl_nic/rtl8168e-2.fw (-2) |
| [ 9.855038] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware |
| [ 9.864499] r8169 0000:01:00.0: Direct firmware load for rtl_nic/rtl8168e-2.fw failed with error -2 |
| [ 9.864512] r8169 0000:01:00.0 enp1s0: unable to load firmware patch rtl_nic/rtl8168e-2.fw (-2) |
| [ 9.868759] RTL8211DN Gigabit Ethernet r8169-100:00: attached PHY driver [RTL8211DN Gigabit Ethernet] (mii_bus:phy_addr=r8169-100:00, irq=IGNORE) |
| [ 9.978126] r8169 0000:01:00.0 enp1s0: Link is Down |
| [ 9.978276] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready |
| [ 12.487119] r8169 0000:01:00.0 enp1s0: Link is Up - 1Gbps/Full - flow control rx/tx |
| [ 12.487146] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready |
| [ 136.317439] random: crng init done |
| [ 136.317452] random: 7 urandom warning(s) missed due to ratelimiting |