| [ 0.000000] Linux version 5.0.0-00001-gea5c13d68f20 (martin@laptop) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1)) #49 SMP Mon Mar 4 10:53:24 CET 2019 |
| [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.0.0-00001-gea5c13d68f20 root=UUID=5e6b38be-bc16-475b-8de3-1e5acbc60d52 ro iomem=relaxed |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' |
| [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 |
| [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. |
| [ 0.000000] BIOS-provided physical RAM map: |
| [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff1ffff] usable |
| [ 0.000000] BIOS-e820: [mem 0x00000000bff20000-0x00000000c29fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043d5fffff] usable |
| [ 0.000000] NX (Execute Disable) protection: active |
| [ 0.000000] SMBIOS 2.7 present. |
| [ 0.000000] DMI: LENOVO 232566G/232566G, BIOS CBET4000 4.9-973-g9276fe4089-dirty 03/08/2019 |
| [ 0.000000] tsc: Fast TSC calibration using PIT |
| [ 0.000000] tsc: Detected 2893.294 MHz processor |
| [ 0.001000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| [ 0.001001] e820: remove [mem 0x000a0000-0x000fffff] usable |
| [ 0.001004] last_pfn = 0x43d600 max_arch_pfn = 0x400000000 |
| [ 0.001009] MTRR default type: write-back |
| [ 0.001009] MTRR fixed ranges enabled: |
| [ 0.001010] 00000-9FFFF write-back |
| [ 0.001011] A0000-BFFFF uncachable |
| [ 0.001012] C0000-FFFFF write-back |
| [ 0.001012] MTRR variable ranges enabled: |
| [ 0.001014] 0 base 0C0000000 mask FF0000000 uncachable |
| [ 0.001014] 1 base 0D0000000 mask FF0000000 write-combining |
| [ 0.001015] 2 base 0E0000000 mask FE0000000 uncachable |
| [ 0.001016] 3 disabled |
| [ 0.001016] 4 disabled |
| [ 0.001016] 5 disabled |
| [ 0.001017] 6 disabled |
| [ 0.001017] 7 disabled |
| [ 0.001017] 8 disabled |
| [ 0.001018] 9 disabled |
| [ 0.001773] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT |
| [ 0.002139] last_pfn = 0xbff20 max_arch_pfn = 0x400000000 |
| [ 0.011830] Base memory trampoline at [(____ptrval____)] 99000 size 24576 |
| [ 0.011835] BRK [0x15a801000, 0x15a801fff] PGTABLE |
| [ 0.011837] BRK [0x15a802000, 0x15a802fff] PGTABLE |
| [ 0.011837] BRK [0x15a803000, 0x15a803fff] PGTABLE |
| [ 0.011865] BRK [0x15a804000, 0x15a804fff] PGTABLE |
| [ 0.011867] BRK [0x15a805000, 0x15a805fff] PGTABLE |
| [ 0.011948] BRK [0x15a806000, 0x15a806fff] PGTABLE |
| [ 0.011958] BRK [0x15a807000, 0x15a807fff] PGTABLE |
| [ 0.011978] BRK [0x15a808000, 0x15a808fff] PGTABLE |
| [ 0.012131] RAMDISK: [mem 0x35427000-0x36a0afff] |
| [ 0.012136] ACPI: Early table checksum verification disabled |
| [ 0.012192] ACPI: RSDP 0x00000000000F6770 000024 (v02 COREv4) |
| [ 0.012196] ACPI: XSDT 0x00000000BFF440E0 00005C (v01 COREv4 COREBOOT 00000000 CORE 00000000) |
| [ 0.012201] ACPI: FACP 0x00000000BFF47B20 0000F4 (v04 COREv4 COREBOOT 00000000 CORE 00000000) |
| [ 0.012205] ACPI: DSDT 0x00000000BFF44280 00389F (v02 COREv4 COREBOOT 20110725 INTL 20180810) |
| [ 0.012208] ACPI: FACS 0x00000000BFF44240 000040 |
| [ 0.012210] ACPI: FACS 0x00000000BFF44240 000040 |
| [ 0.012212] ACPI: SSDT 0x00000000BFF47C20 001A8B (v02 COREv4 COREBOOT 0000002A CORE 00000000) |
| [ 0.012215] ACPI: MCFG 0x00000000BFF496B0 00003C (v01 COREv4 COREBOOT 00000000 CORE 00000000) |
| [ 0.012217] ACPI: TCPA 0x00000000BFF496F0 000032 (v02 COREv4 COREBOOT 00000000 CORE 00000000) |
| [ 0.012220] ACPI: APIC 0x00000000BFF49730 00006C (v02 COREv4 COREBOOT 00000000 CORE 00000000) |
| [ 0.012222] ACPI: DMAR 0x00000000BFF497A0 0000D0 (v01 COREv4 COREBOOT 00000000 CORE 00000000) |
| [ 0.012225] ACPI: HPET 0x00000000BFF4B870 000038 (v01 COREv4 COREBOOT 00000000 CORE 00000000) |
| [ 0.012232] ACPI: Local APIC address 0xfee00000 |
| [ 0.012307] No NUMA configuration found |
| [ 0.012308] Faking a node at [mem 0x0000000000000000-0x000000043d5fffff] |
| [ 0.012311] NODE_DATA(0) allocated [mem 0x43d5ef000-0x43d5f3fff] |
| [ 0.012339] Zone ranges: |
| [ 0.012340] DMA [mem 0x0000000000001000-0x0000000000ffffff] |
| [ 0.012342] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] |
| [ 0.012343] Normal [mem 0x0000000100000000-0x000000043d5fffff] |
| [ 0.012344] Device empty |
| [ 0.012344] Movable zone start for each node |
| [ 0.012345] Early memory node ranges |
| [ 0.012346] node 0: [mem 0x0000000000001000-0x000000000009efff] |
| [ 0.012347] node 0: [mem 0x0000000000100000-0x00000000bff1ffff] |
| [ 0.012348] node 0: [mem 0x0000000100000000-0x000000043d5fffff] |
| [ 0.012356] Zeroed struct page in unavailable ranges: 322 pages |
| [ 0.012357] Initmem setup node 0 [mem 0x0000000000001000-0x000000043d5fffff] |
| [ 0.012359] On node 0 totalpages: 4183230 |
| [ 0.012360] DMA zone: 64 pages used for memmap |
| [ 0.012361] DMA zone: 21 pages reserved |
| [ 0.012361] DMA zone: 3998 pages, LIFO batch:0 |
| [ 0.012456] DMA32 zone: 12221 pages used for memmap |
| [ 0.012457] DMA32 zone: 782112 pages, LIFO batch:63 |
| [ 0.031035] Normal zone: 53080 pages used for memmap |
| [ 0.031036] Normal zone: 3397120 pages, LIFO batch:63 |
| [ 0.108052] Reserving Intel graphics memory at [mem 0xc0a00000-0xc29fffff] |
| [ 0.108245] ACPI: PM-Timer IO Port: 0x508 |
| [ 0.108247] ACPI: Local APIC address 0xfee00000 |
| [ 0.108262] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 |
| [ 0.108265] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) |
| [ 0.108266] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) |
| [ 0.108268] ACPI: IRQ0 used by override. |
| [ 0.108269] ACPI: IRQ9 used by override. |
| [ 0.108271] Using ACPI (MADT) for SMP configuration information |
| [ 0.108273] ACPI: HPET id: 0x8086a701 base: 0xfed00000 |
| [ 0.108278] smpboot: Allowing 4 CPUs, 0 hotplug CPUs |
| [ 0.108287] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] |
| [ 0.108289] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] |
| [ 0.108290] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] |
| [ 0.108291] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] |
| [ 0.108292] PM: Registered nosave memory: [mem 0xbff20000-0xc29fffff] |
| [ 0.108293] PM: Registered nosave memory: [mem 0xc2a00000-0xefffffff] |
| [ 0.108294] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff] |
| [ 0.108294] PM: Registered nosave memory: [mem 0xf4000000-0xfed3ffff] |
| [ 0.108295] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff] |
| [ 0.108296] PM: Registered nosave memory: [mem 0xfed45000-0xfed8ffff] |
| [ 0.108297] PM: Registered nosave memory: [mem 0xfed90000-0xfed91fff] |
| [ 0.108297] PM: Registered nosave memory: [mem 0xfed92000-0xffffffff] |
| [ 0.108299] [mem 0xc2a00000-0xefffffff] available for PCI devices |
| [ 0.108300] Booting paravirtualized kernel on bare hardware |
| [ 0.108303] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns |
| [ 0.197944] random: get_random_bytes called from start_kernel+0x94/0x4a8 with crng_init=0 |
| [ 0.197950] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 |
| [ 0.198126] percpu: Embedded 44 pages/cpu @(____ptrval____) s142680 r8192 d29352 u524288 |
| [ 0.198133] pcpu-alloc: s142680 r8192 d29352 u524288 alloc=1*2097152 |
| [ 0.198133] pcpu-alloc: [0] 0 1 2 3 |
| [ 0.198149] Built 1 zonelists, mobility grouping on. Total pages: 4117844 |
| [ 0.198150] Policy zone: Normal |
| [ 0.198152] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.0.0-00001-gea5c13d68f20 root=UUID=5e6b38be-bc16-475b-8de3-1e5acbc60d52 ro iomem=relaxed |
| [ 0.201661] Calgary: detecting Calgary via BIOS EBDA area |
| [ 0.201666] Calgary: Unable to locate Rio Grande table in EBDA - bailing! |
| [ 0.243863] Memory: 16356772K/16732920K available (10243K kernel code, 1152K rwdata, 3184K rodata, 1588K init, 2420K bss, 376148K reserved, 0K cma-reserved) |
| [ 0.243947] Kernel/User page tables isolation: enabled |
| [ 0.243962] ftrace: allocating 31295 entries in 123 pages |
| [ 0.255121] rcu: Hierarchical RCU implementation. |
| [ 0.255123] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4. |
| [ 0.255124] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. |
| [ 0.255125] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 |
| [ 0.257806] NR_IRQS: 33024, nr_irqs: 456, preallocated irqs: 16 |
| [ 0.258403] Console: colour dummy device 80x25 |
| [ 0.258511] printk: console [tty0] enabled |
| [ 0.258527] ACPI: Core revision 20181213 |
| [ 0.258666] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns |
| [ 0.258678] hpet clockevent registered |
| [ 0.258683] APIC: Switch to symmetric I/O mode setup |
| [ 0.258686] DMAR: Host address width 36 |
| [ 0.258687] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 |
| [ 0.258693] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a |
| [ 0.258695] DMAR: RMRR base: 0x000000c0800000 end: 0x000000c29fffff |
| [ 0.258697] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 |
| [ 0.258701] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a |
| [ 0.258704] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 |
| [ 0.258706] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 |
| [ 0.258708] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. |
| [ 0.259136] DMAR-IR: Enabled IRQ remapping in x2apic mode |
| [ 0.259139] x2apic enabled |
| [ 0.259145] Switched APIC routing to cluster x2apic. |
| [ 0.259592] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 |
| [ 0.278684] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x29b483f0c36, max_idle_ns: 440795226749 ns |
| [ 0.278698] Calibrating delay loop (skipped), value calculated using timer frequency.. 5786.58 BogoMIPS (lpj=11573176) |
| [ 0.278702] pid_max: default: 32768 minimum: 301 |
| [ 0.278743] LSM: Security Framework initializing |
| [ 0.278746] Yama: becoming mindful. |
| [ 0.278753] AppArmor: AppArmor disabled by boot time parameter |
| [ 0.281091] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) |
| [ 0.282282] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) |
| [ 0.282343] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) |
| [ 0.282384] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) |
| [ 0.282581] mce: CPU supports 7 MCE banks |
| [ 0.282592] mce: CPU0: Thermal monitoring enabled (TM1) |
| [ 0.282600] process: using mwait in idle threads |
| [ 0.282603] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 |
| [ 0.282605] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 |
| [ 0.282608] Spectre V2 : Mitigation: Full generic retpoline |
| [ 0.282609] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch |
| [ 0.282611] Spectre V2 : Enabling Restricted Speculation for firmware calls |
| [ 0.282620] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier |
| [ 0.282622] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl |
| [ 0.282625] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp |
| [ 0.282785] Freeing SMP alternatives memory: 28K |
| [ 0.284394] TSC deadline timer enabled |
| [ 0.284397] smpboot: CPU0: Intel(R) Core(TM) i7-3520M CPU @ 2.90GHz (family: 0x6, model: 0x3a, stepping: 0x9) |
| [ 0.284488] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. |
| [ 0.284510] ... version: 3 |
| [ 0.284511] ... bit width: 48 |
| [ 0.284512] ... generic registers: 4 |
| [ 0.284514] ... value mask: 0000ffffffffffff |
| [ 0.284516] ... max period: 00007fffffffffff |
| [ 0.284517] ... fixed-purpose events: 3 |
| [ 0.284519] ... event mask: 000000070000000f |
| [ 0.284551] rcu: Hierarchical SRCU implementation. |
| [ 0.285040] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. |
| [ 0.285083] smp: Bringing up secondary CPUs ... |
| [ 0.285166] x86: Booting SMP configuration: |
| [ 0.285168] .... node #0, CPUs: #1 #2 #3 |
| [ 0.289111] smp: Brought up 1 node, 4 CPUs |
| [ 0.289111] smpboot: Max logical packages: 1 |
| [ 0.289111] smpboot: Total of 4 processors activated (23146.35 BogoMIPS) |
| [ 0.291068] devtmpfs: initialized |
| [ 0.291068] x86/mm: Memory block size: 128MB |
| [ 0.291971] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns |
| [ 0.291971] futex hash table entries: 1024 (order: 4, 65536 bytes) |
| [ 0.291971] pinctrl core: initialized pinctrl subsystem |
| [ 0.291971] NET: Registered protocol family 16 |
| [ 0.291971] audit: initializing netlink subsys (disabled) |
| [ 0.291971] audit: type=2000 audit(1552027538.032:1): state=initialized audit_enabled=0 res=1 |
| [ 0.291971] cpuidle: using governor ladder |
| [ 0.291971] cpuidle: using governor menu |
| [ 0.291971] ACPI: bus type PCI registered |
| [ 0.291971] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 |
| [ 0.291971] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) |
| [ 0.291971] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 |
| [ 0.291971] PCI: Using configuration type 1 for base access |
| [ 0.291971] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on |
| [ 0.291971] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages |
| [ 0.291971] ACPI: Added _OSI(Module Device) |
| [ 0.291971] ACPI: Added _OSI(Processor Device) |
| [ 0.291971] ACPI: Added _OSI(3.0 _SCP Extensions) |
| [ 0.291971] ACPI: Added _OSI(Processor Aggregator Device) |
| [ 0.291971] ACPI: Added _OSI(Linux-Dell-Video) |
| [ 0.291971] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) |
| [ 0.291971] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) |
| [ 0.296667] ACPI: 2 ACPI AML tables successfully acquired and loaded |
| [ 0.297547] ACPI: EC: EC started |
| [ 0.297550] ACPI: EC: interrupt blocked |
| [ 0.297835] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC |
| [ 0.297838] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62 |
| [ 0.297841] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions |
| [ 0.297843] ACPI: Interpreter enabled |
| [ 0.297860] ACPI: (supports S0 S3 S4 S5) |
| [ 0.297861] ACPI: Using IOAPIC for interrupt routing |
| [ 0.297878] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| [ 0.297998] ACPI: Enabled 1 GPEs in block 00 to 3F |
| [ 0.301433] ACPI: Power Resource [FPWR] (off) |
| [ 0.301711] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) |
| [ 0.301716] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] |
| [ 0.301762] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability LTR] |
| [ 0.301771] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge |
| [ 0.301823] acpi PNP0A08:00: ignoring host bridge window [mem 0x000c4000-0x000c7fff window] (conflicts with Video ROM [mem 0x000c0000-0x000c6bff]) |
| [ 0.301974] PCI host bridge to bus 0000:00 |
| [ 0.301977] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] |
| [ 0.301980] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] |
| [ 0.301982] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] |
| [ 0.301985] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] |
| [ 0.301988] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] |
| [ 0.301990] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window] |
| [ 0.301993] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] |
| [ 0.301995] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] |
| [ 0.301998] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] |
| [ 0.302001] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] |
| [ 0.302003] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] |
| [ 0.302006] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] |
| [ 0.302009] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window] |
| [ 0.302011] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window] |
| [ 0.302014] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window] |
| [ 0.302017] pci_bus 0000:00: root bus resource [mem 0xc2a00001-0xefffffff window] |
| [ 0.302020] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] |
| [ 0.302023] pci_bus 0000:00: root bus resource [bus 00-ff] |
| [ 0.302030] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000 |
| [ 0.302114] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000 |
| [ 0.302125] pci 0000:00:02.0: reg 0x10: [mem 0xe1000000-0xe13fffff 64bit] |
| [ 0.302130] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref] |
| [ 0.302134] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f] |
| [ 0.302204] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000 |
| [ 0.302213] pci 0000:00:04.0: reg 0x10: [mem 0xe1630000-0xe1637fff 64bit] |
| [ 0.302302] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330 |
| [ 0.302326] pci 0000:00:14.0: reg 0x10: [mem 0xe1620000-0xe162ffff 64bit] |
| [ 0.302393] pci 0000:00:14.0: PME# supported from D3hot D3cold |
| [ 0.302491] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000 |
| [ 0.302592] pci 0000:00:16.0: reg 0x10: [mem 0xe1642000-0xe164200f 64bit] |
| [ 0.302915] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold |
| [ 0.303037] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000 |
| [ 0.303056] pci 0000:00:19.0: reg 0x10: [mem 0xe1600000-0xe161ffff] |
| [ 0.303064] pci 0000:00:19.0: reg 0x14: [mem 0xe163c000-0xe163cfff] |
| [ 0.303072] pci 0000:00:19.0: reg 0x18: [io 0x3040-0x305f] |
| [ 0.303129] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold |
| [ 0.303195] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 |
| [ 0.303216] pci 0000:00:1a.0: reg 0x10: [mem 0xe163f000-0xe163f3ff] |
| [ 0.303296] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold |
| [ 0.303368] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300 |
| [ 0.303390] pci 0000:00:1b.0: reg 0x10: [mem 0xe1638000-0xe163bfff 64bit] |
| [ 0.303460] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold |
| [ 0.303535] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400 |
| [ 0.303675] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold |
| [ 0.303775] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400 |
| [ 0.303914] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold |
| [ 0.304015] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400 |
| [ 0.304181] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold |
| [ 0.304281] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 |
| [ 0.304302] pci 0000:00:1d.0: reg 0x10: [mem 0xe1640000-0xe16403ff] |
| [ 0.304383] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold |
| [ 0.304456] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100 |
| [ 0.304620] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601 |
| [ 0.304640] pci 0000:00:1f.2: reg 0x10: [io 0x3080-0x3087] |
| [ 0.304648] pci 0000:00:1f.2: reg 0x14: [io 0x3090-0x3093] |
| [ 0.304656] pci 0000:00:1f.2: reg 0x18: [io 0x3088-0x308f] |
| [ 0.304664] pci 0000:00:1f.2: reg 0x1c: [io 0x3094-0x3097] |
| [ 0.304672] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f] |
| [ 0.304680] pci 0000:00:1f.2: reg 0x24: [mem 0xe163e000-0xe163e7ff] |
| [ 0.304722] pci 0000:00:1f.2: PME# supported from D3hot |
| [ 0.304789] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500 |
| [ 0.304808] pci 0000:00:1f.3: reg 0x10: [mem 0xe1641000-0xe16410ff 64bit] |
| [ 0.304827] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f] |
| [ 0.304906] pci 0000:00:1f.6: [8086:1e24] type 00 class 0x118000 |
| [ 0.304930] pci 0000:00:1f.6: reg 0x10: [mem 0xe163d000-0xe163dfff 64bit] |
| [ 0.305138] pci 0000:01:00.0: [1180:e822] type 00 class 0x080501 |
| [ 0.305178] pci 0000:01:00.0: MMC controller base frequency changed to 50Mhz. |
| [ 0.305239] pci 0000:01:00.0: reg 0x10: [mem 0xe1400000-0xe14000ff] |
| [ 0.305552] pci 0000:01:00.0: supports D1 D2 |
| [ 0.305553] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.305756] pci 0000:00:1c.0: PCI bridge to [bus 01] |
| [ 0.305763] pci 0000:00:1c.0: bridge window [mem 0xe1400000-0xe14fffff] |
| [ 0.305864] pci 0000:02:00.0: [168c:002b] type 00 class 0x028000 |
| [ 0.305944] pci 0000:02:00.0: reg 0x10: [mem 0xe1500000-0xe150ffff 64bit] |
| [ 0.306223] pci 0000:02:00.0: supports D1 |
| [ 0.306224] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold |
| [ 0.306445] pci 0000:00:1c.1: PCI bridge to [bus 02] |
| [ 0.306452] pci 0000:00:1c.1: bridge window [mem 0xe1500000-0xe15fffff] |
| [ 0.306515] pci 0000:00:1c.2: PCI bridge to [bus 03] |
| [ 0.306522] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff] |
| [ 0.306526] pci 0000:00:1c.2: bridge window [mem 0xe0800000-0xe0ffffff] |
| [ 0.306535] pci 0000:00:1c.2: bridge window [mem 0xe0000000-0xe07fffff 64bit pref] |
| [ 0.306684] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.306731] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.306773] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.306814] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.306855] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.306895] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.306935] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.306975] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.307589] ACPI: EC: interrupt unblocked |
| [ 0.307603] ACPI: EC: event unblocked |
| [ 0.307613] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62 |
| [ 0.307616] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events |
| [ 0.307683] pci 0000:00:02.0: vgaarb: setting as boot VGA device |
| [ 0.307683] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none |
| [ 0.307683] pci 0000:00:02.0: vgaarb: bridge control possible |
| [ 0.307683] vgaarb: loaded |
| [ 0.307683] pps_core: LinuxPPS API ver. 1 registered |
| [ 0.307683] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> |
| [ 0.307683] PTP clock support registered |
| [ 0.307683] EDAC MC: Ver: 3.0.0 |
| [ 0.307683] PCI: Using ACPI for IRQ routing |
| [ 0.308175] PCI: pci_cache_line_size set to 64 bytes |
| [ 0.308259] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] |
| [ 0.308260] e820: reserve RAM buffer [mem 0xbff20000-0xbfffffff] |
| [ 0.308261] e820: reserve RAM buffer [mem 0x43d600000-0x43fffffff] |
| [ 0.308356] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 |
| [ 0.308356] hpet0: 8 comparators, 64-bit 14.318180 MHz counter |
| [ 0.310704] clocksource: Switched to clocksource tsc-early |
| [ 0.319393] VFS: Disk quotas dquot_6.6.0 |
| [ 0.319412] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) |
| [ 0.319475] pnp: PnP ACPI init |
| [ 0.319614] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved |
| [ 0.319618] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved |
| [ 0.319622] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved |
| [ 0.319625] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved |
| [ 0.319628] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved |
| [ 0.319630] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved |
| [ 0.319633] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved |
| [ 0.319636] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved |
| [ 0.319639] system 00:00: [mem 0x20000000-0x201fffff] could not be reserved |
| [ 0.319641] system 00:00: [mem 0x40000000-0x401fffff] could not be reserved |
| [ 0.319647] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) |
| [ 0.320090] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved |
| [ 0.320096] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) |
| [ 0.320131] system 00:02: [io 0x0500-0x057f] has been reserved |
| [ 0.320135] system 00:02: [io 0x0480-0x04bf] has been reserved |
| [ 0.320139] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) |
| [ 0.320158] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) |
| [ 0.320186] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) |
| [ 0.320207] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active) |
| [ 0.320229] pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active) |
| [ 0.320245] pnp: PnP ACPI: found 7 devices |
| [ 0.325905] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns |
| [ 0.325948] pci 0000:00:1c.0: PCI bridge to [bus 01] |
| [ 0.325956] pci 0000:00:1c.0: bridge window [mem 0xe1400000-0xe14fffff] |
| [ 0.325969] pci 0000:00:1c.1: PCI bridge to [bus 02] |
| [ 0.325976] pci 0000:00:1c.1: bridge window [mem 0xe1500000-0xe15fffff] |
| [ 0.325988] pci 0000:00:1c.2: PCI bridge to [bus 03] |
| [ 0.325992] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff] |
| [ 0.326000] pci 0000:00:1c.2: bridge window [mem 0xe0800000-0xe0ffffff] |
| [ 0.326006] pci 0000:00:1c.2: bridge window [mem 0xe0000000-0xe07fffff 64bit pref] |
| [ 0.326017] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] |
| [ 0.326018] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] |
| [ 0.326019] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] |
| [ 0.326020] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] |
| [ 0.326022] pci_bus 0000:00: resource 8 [mem 0x000c8000-0x000cbfff window] |
| [ 0.326023] pci_bus 0000:00: resource 9 [mem 0x000cc000-0x000cffff window] |
| [ 0.326024] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window] |
| [ 0.326025] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window] |
| [ 0.326026] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window] |
| [ 0.326027] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window] |
| [ 0.326029] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window] |
| [ 0.326030] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window] |
| [ 0.326031] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window] |
| [ 0.326032] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window] |
| [ 0.326033] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff window] |
| [ 0.326034] pci_bus 0000:00: resource 19 [mem 0xc2a00001-0xefffffff window] |
| [ 0.326036] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed44fff window] |
| [ 0.326037] pci_bus 0000:01: resource 1 [mem 0xe1400000-0xe14fffff] |
| [ 0.326038] pci_bus 0000:02: resource 1 [mem 0xe1500000-0xe15fffff] |
| [ 0.326040] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff] |
| [ 0.326041] pci_bus 0000:03: resource 1 [mem 0xe0800000-0xe0ffffff] |
| [ 0.326042] pci_bus 0000:03: resource 2 [mem 0xe0000000-0xe07fffff 64bit pref] |
| [ 0.326121] NET: Registered protocol family 2 |
| [ 0.326245] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes) |
| [ 0.326290] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) |
| [ 0.326465] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) |
| [ 0.326585] TCP: Hash tables configured (established 131072 bind 65536) |
| [ 0.326616] UDP hash table entries: 8192 (order: 6, 262144 bytes) |
| [ 0.326657] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) |
| [ 0.326740] NET: Registered protocol family 1 |
| [ 0.326753] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] |
| [ 0.327265] PCI: CLS 64 bytes, default 64 |
| [ 0.327299] Unpacking initramfs... |
| [ 0.652098] Freeing initrd memory: 22416K |
| [ 0.652189] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) |
| [ 0.652193] software IO TLB: mapped [mem 0xbbf20000-0xbff20000] (64MB) |
| [ 0.652788] Initialise system trusted keyrings |
| [ 0.652833] workingset: timestamp_bits=40 max_order=22 bucket_order=0 |
| [ 0.652862] zbud: loaded |
| [ 0.946755] Key type asymmetric registered |
| [ 0.946759] Asymmetric key parser 'x509' registered |
| [ 0.946771] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) |
| [ 0.946803] io scheduler mq-deadline registered |
| [ 0.946805] io scheduler kyber registered |
| [ 0.947085] pcieport 0000:00:1c.0: Signaling PME with IRQ 26 |
| [ 0.947307] pcieport 0000:00:1c.1: Signaling PME with IRQ 27 |
| [ 0.947517] pcieport 0000:00:1c.2: Signaling PME with IRQ 28 |
| [ 0.947545] pciehp 0000:00:1c.2:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+ |
| [ 0.947677] intel_idle: MWAIT substates: 0x21120 |
| [ 0.947678] intel_idle: v0.4.1 model 0x3A |
| [ 0.947843] intel_idle: lapic_timer_reliable_states 0xffffffff |
| [ 0.948406] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
| [ 0.948853] Linux agpgart interface v0.103 |
| [ 0.954730] tpm_tis 00:06: 1.2 TPM (device-id 0x0, rev-id 78) |
| [ 1.007028] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de> |
| [ 1.007032] AMD-Vi: AMD IOMMUv2 functionality not available on this system |
| [ 1.007558] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 |
| [ 1.009244] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| [ 1.009250] serio: i8042 AUX port at 0x60,0x64 irq 12 |
| [ 1.009511] mousedev: PS/2 mouse device common for all mice |
| [ 1.009562] rtc_cmos 00:03: RTC can wake from S4 |
| [ 1.009797] rtc_cmos 00:03: registered as rtc0 |
| [ 1.009824] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs |
| [ 1.009836] intel_pstate: Intel P-state driver initializing |
| [ 1.010102] ledtrig-cpu: registered to indicate activity on CPUs |
| [ 1.010485] NET: Registered protocol family 10 |
| [ 1.010899] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 |
| [ 1.010948] Segment Routing with IPv6 |
| [ 1.010985] mip6: Mobile IPv6 |
| [ 1.010991] NET: Registered protocol family 17 |
| [ 1.010998] mpls_gso: MPLS GSO support |
| [ 1.011411] microcode: sig=0x306a9, pf=0x10, revision=0x20 |
| [ 1.011528] microcode: Microcode Update Driver: v2.2. |
| [ 1.011547] sched_clock: Marking stable (1010815874, 703772)->(1017430901, -5911255) |
| [ 1.011895] registered taskstats version 1 |
| [ 1.011900] Loading compiled-in X.509 certificates |
| [ 1.011930] zswap: loaded using pool lzo/zbud |
| [ 1.012079] ima: Allocated hash algorithm: sha256 |
| [ 1.142783] No architecture policies found |
| [ 1.143532] rtc_cmos 00:03: setting system clock to 2019-03-08T06:45:39 UTC (1552027539) |
| [ 1.145732] Freeing unused kernel image memory: 1588K |
| [ 1.162727] Write protecting the kernel read-only data: 16384k |
| [ 1.163554] Freeing unused kernel image memory: 2016K |
| [ 1.163937] Freeing unused kernel image memory: 912K |
| [ 1.179175] x86/mm: Checked W+X mappings: passed, no W+X pages found. |
| [ 1.179177] x86/mm: Checking user space page tables |
| [ 1.185194] x86/mm: Checked W+X mappings: passed, no W+X pages found. |
| [ 1.185197] Run /init as init process |
| [ 1.249954] random: systemd-udevd: uninitialized urandom read (16 bytes read) |
| [ 1.250021] random: systemd-udevd: uninitialized urandom read (16 bytes read) |
| [ 1.250030] random: systemd-udevd: uninitialized urandom read (16 bytes read) |
| [ 1.276764] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k |
| [ 1.276771] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. |
| [ 1.276954] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode |
| [ 1.279317] ACPI: bus type USB registered |
| [ 1.279342] usbcore: registered new interface driver usbfs |
| [ 1.279355] usbcore: registered new interface driver hub |
| [ 1.279386] usbcore: registered new device driver usb |
| [ 1.280612] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| [ 1.282186] ehci-pci: EHCI PCI platform driver |
| [ 1.282364] ehci-pci 0000:00:1a.0: EHCI Host Controller |
| [ 1.282373] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 |
| [ 1.282388] ehci-pci 0000:00:1a.0: debug port 2 |
| [ 1.285501] SCSI subsystem initialized |
| [ 1.286286] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported |
| [ 1.286305] ehci-pci 0000:00:1a.0: irq 19, io mem 0xe163f000 |
| [ 1.288482] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt |
| [ 1.289061] libata version 3.00 loaded. |
| [ 1.290296] ahci 0000:00:1f.2: version 3.0 |
| [ 1.290457] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled |
| [ 1.293415] thermal LNXTHERM:00: registered as thermal_zone0 |
| [ 1.293418] ACPI: Thermal Zone [THM0] (59 C) |
| [ 1.296022] thermal LNXTHERM:01: registered as thermal_zone1 |
| [ 1.296027] ACPI: Thermal Zone [THM1] (27 C) |
| [ 1.296521] sdhci: Secure Digital Host Controller Interface driver |
| [ 1.296525] sdhci: Copyright(c) Pierre Ossman |
| [ 1.297469] sdhci-pci 0000:01:00.0: SDHCI controller found [1180:e822] (rev 7) |
| [ 1.297760] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes |
| [ 1.298007] mmc0: SDHCI controller on PCI [0000:01:00.0] using DMA |
| [ 1.298707] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 |
| [ 1.298759] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00 |
| [ 1.298764] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.298768] usb usb1: Product: EHCI Host Controller |
| [ 1.298771] usb usb1: Manufacturer: Linux 5.0.0-00001-gea5c13d68f20 ehci_hcd |
| [ 1.298773] usb usb1: SerialNumber: 0000:00:1a.0 |
| [ 1.298867] hub 1-0:1.0: USB hub found |
| [ 1.298873] hub 1-0:1.0: 3 ports detected |
| [ 1.298982] xhci_hcd 0000:00:14.0: xHCI Host Controller |
| [ 1.298993] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 |
| [ 1.300060] xhci_hcd 0000:00:14.0: hcc params 0x200071a1 hci version 0x100 quirks 0x000000000000b930 |
| [ 1.300069] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported |
| [ 1.300233] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00 |
| [ 1.300237] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.300241] usb usb2: Product: xHCI Host Controller |
| [ 1.300244] usb usb2: Manufacturer: Linux 5.0.0-00001-gea5c13d68f20 xhci-hcd |
| [ 1.300248] usb usb2: SerialNumber: 0000:00:14.0 |
| [ 1.300349] hub 2-0:1.0: USB hub found |
| [ 1.300362] hub 2-0:1.0: 4 ports detected |
| [ 1.300529] xhci_hcd 0000:00:14.0: xHCI Host Controller |
| [ 1.300536] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 |
| [ 1.300542] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed |
| [ 1.300563] ehci-pci 0000:00:1d.0: EHCI Host Controller |
| [ 1.300585] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.00 |
| [ 1.300589] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.300593] usb usb3: Product: xHCI Host Controller |
| [ 1.300596] usb usb3: Manufacturer: Linux 5.0.0-00001-gea5c13d68f20 xhci-hcd |
| [ 1.300600] usb usb3: SerialNumber: 0000:00:14.0 |
| [ 1.300698] hub 3-0:1.0: USB hub found |
| [ 1.300712] hub 3-0:1.0: 4 ports detected |
| [ 1.300873] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4 |
| [ 1.300888] ehci-pci 0000:00:1d.0: debug port 2 |
| [ 1.300980] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl SATA mode |
| [ 1.300986] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst |
| [ 1.304781] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported |
| [ 1.305394] ehci-pci 0000:00:1d.0: irq 18, io mem 0xe1640000 |
| [ 1.306705] scsi host0: ahci |
| [ 1.306921] scsi host1: ahci |
| [ 1.307211] scsi host2: ahci |
| [ 1.307319] scsi host3: ahci |
| [ 1.307610] scsi host4: ahci |
| [ 1.311974] scsi host5: ahci |
| [ 1.312029] ata1: SATA max UDMA/133 abar m2048@0xe163e000 port 0xe163e100 irq 30 |
| [ 1.312034] ata2: SATA max UDMA/133 abar m2048@0xe163e000 port 0xe163e180 irq 30 |
| [ 1.312037] ata3: SATA max UDMA/133 abar m2048@0xe163e000 port 0xe163e200 irq 30 |
| [ 1.312039] ata4: DUMMY |
| [ 1.312040] ata5: DUMMY |
| [ 1.312042] ata6: DUMMY |
| [ 1.318698] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 |
| [ 1.318743] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00 |
| [ 1.318747] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.318749] usb usb4: Product: EHCI Host Controller |
| [ 1.318751] usb usb4: Manufacturer: Linux 5.0.0-00001-gea5c13d68f20 ehci_hcd |
| [ 1.318753] usb usb4: SerialNumber: 0000:00:1d.0 |
| [ 1.318852] hub 4-0:1.0: USB hub found |
| [ 1.318858] hub 4-0:1.0: 3 ports detected |
| [ 1.421414] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock |
| [ 1.546191] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 3c:97:0e:5f:1b:41 |
| [ 1.546195] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection |
| [ 1.546247] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF |
| [ 1.547278] e1000e 0000:00:19.0 enp0s25: renamed from eth0 |
| [ 1.625494] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [ 1.625865] ata1.00: supports DRM functions and may not be fully accessible |
| [ 1.626720] ata1.00: ATA-10: Crucial_CT525MX300SSD1, M0CR060, max UDMA/133 |
| [ 1.626729] ata1.00: 1025610768 sectors, multi 16: LBA48 NCQ (depth 32), AA |
| [ 1.629026] ata1.00: supports DRM functions and may not be fully accessible |
| [ 1.631824] ata1.00: configured for UDMA/133 |
| [ 1.634718] usb 1-1: new high-speed USB device number 2 using ehci-pci |
| [ 1.642358] scsi 0:0:0:0: Direct-Access ATA Crucial_CT525MX3 R060 PQ: 0 ANSI: 5 |
| [ 1.654731] usb 4-1: new high-speed USB device number 2 using ehci-pci |
| [ 1.666724] tsc: Refined TSC clocksource calibration: 2893.427 MHz |
| [ 1.666743] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29b502105a9, max_idle_ns: 440795323709 ns |
| [ 1.666790] clocksource: Switched to clocksource tsc |
| [ 1.791186] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 |
| [ 1.791197] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 1.791608] hub 1-1:1.0: USB hub found |
| [ 1.791748] hub 1-1:1.0: 6 ports detected |
| [ 1.811160] usb 4-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 |
| [ 1.811172] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 1.811587] hub 4-1:1.0: USB hub found |
| [ 1.811749] hub 4-1:1.0: 8 ports detected |
| [ 1.957258] ata2: SATA link down (SStatus 0 SControl 300) |
| [ 1.975419] random: fast init done |
| [ 2.049487] psmouse serio1: synaptics: queried max coordinates: x [..5768], y [..5062] |
| [ 2.078726] usb 1-1.4: new full-speed USB device number 3 using ehci-pci |
| [ 2.079513] psmouse serio1: synaptics: queried min coordinates: x [1174..], y [790..] |
| [ 2.139771] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd002a3/0x940300/0x123800/0x0, board id: 1611, fw id: 1099905 |
| [ 2.139793] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0 |
| [ 2.176678] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2 |
| [ 2.190638] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=21e6, bcdDevice= 1.12 |
| [ 2.190649] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [ 2.190656] usb 1-1.4: Product: BCM20702A0 |
| [ 2.190661] usb 1-1.4: Manufacturer: Broadcom Corp |
| [ 2.190666] usb 1-1.4: SerialNumber: 7CE9D3E5DCBD |
| [ 2.270729] usb 1-1.5: new full-speed USB device number 4 using ehci-pci |
| [ 2.273117] ata3: SATA link down (SStatus 0 SControl 300) |
| [ 2.277750] ata1.00: Enabling discard_zeroes_data |
| [ 2.277912] sd 0:0:0:0: [sda] 1025610768 512-byte logical blocks: (525 GB/489 GiB) |
| [ 2.277927] sd 0:0:0:0: [sda] Write Protect is off |
| [ 2.277931] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 |
| [ 2.277955] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 2.278076] ata1.00: Enabling discard_zeroes_data |
| [ 2.281940] sda: sda1 sda2 < sda5 > |
| [ 2.282213] ata1.00: Enabling discard_zeroes_data |
| [ 2.282313] sd 0:0:0:0: [sda] Attached SCSI disk |
| [ 2.341335] PM: Image not found (code -22) |
| [ 2.383488] usb 1-1.5: New USB device found, idVendor=13d3, idProduct=3304, bcdDevice= 0.01 |
| [ 2.383497] usb 1-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 2.410558] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) |
| [ 2.462728] usb 1-1.6: new high-speed USB device number 5 using ehci-pci |
| [ 2.532099] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) |
| [ 2.550959] systemd[1]: Detected architecture x86-64. |
| [ 2.552933] systemd[1]: Set hostname to <laptop>. |
| [ 2.582505] usb 1-1.6: New USB device found, idVendor=04f2, idProduct=b2ea, bcdDevice= 5.18 |
| [ 2.582514] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 2.582518] usb 1-1.6: Product: Integrated Camera |
| [ 2.582521] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd. |
| [ 2.638055] systemd[1]: Listening on Journal Socket. |
| [ 2.638221] systemd[1]: Reached target Remote File Systems. |
| [ 2.638314] systemd[1]: Listening on Journal Socket (/dev/log). |
| [ 2.638401] systemd[1]: Listening on udev Kernel Socket. |
| [ 2.638501] systemd[1]: Listening on Device-mapper event daemon FIFOs. |
| [ 2.638607] systemd[1]: Started Forward Password Requests to Wall Directory Watch. |
| [ 2.638729] systemd[1]: Listening on udev Control Socket. |
| [ 2.657561] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro |
| [ 2.658426] lp: driver loaded but no devices found |
| [ 2.663045] ppdev: user-space parallel port driver |
| [ 2.681198] Key type encrypted registered |
| [ 2.727739] systemd-journald[228]: Received request to flush runtime journal from PID 1 |
| [ 2.806090] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 |
| [ 2.814398] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:29/PNP0C09:00/PNP0C0E:00/input/input4 |
| [ 2.814502] ACPI: Sleep Button [SLPB] |
| [ 2.814565] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:29/PNP0C09:00/PNP0C0D:00/input/input5 |
| [ 2.814579] ACPI: Lid Switch [LID] |
| [ 2.814637] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6 |
| [ 2.814649] ACPI: Power Button [PWRF] |
| [ 2.864472] ACPI: AC Adapter [AC] (on-line) |
| [ 2.872861] battery: ACPI: Battery Slot [BAT0] (battery present) |
| [ 2.873007] battery: ACPI: Battery Slot [BAT1] (battery absent) |
| [ 2.891039] media: Linux media interface: v0.10 |
| [ 2.891872] sd 0:0:0:0: Attached scsi generic sg0 type 0 |
| [ 2.894572] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20181213/utaddress-213) |
| [ 2.894585] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 2.894590] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20181213/utaddress-213) |
| [ 2.894597] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 2.894601] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20181213/utaddress-213) |
| [ 2.894608] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 2.894611] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20181213/utaddress-213) |
| [ 2.894617] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 2.894621] lpc_ich: Resource conflict(s) found affecting gpio_ich |
| [ 2.907197] Non-volatile memory driver v1.3 |
| [ 2.908111] cfg80211: Loading compiled-in X.509 certificates for regulatory database |
| [ 2.911188] thinkpad_acpi: ThinkPad ACPI Extras v0.26 |
| [ 2.911193] thinkpad_acpi: http://ibm-acpi.sf.net/ |
| [ 2.911195] thinkpad_acpi: ThinkPad BIOS CBET4000 4.9-973-g9276fe4089-dirty, EC G2HT35WW-3.22 |
| [ 2.911198] thinkpad_acpi: Lenovo ThinkPad X230, model 232566G |
| [ 2.912105] input: PC Speaker as /devices/platform/pcspkr/input/input7 |
| [ 2.913347] Error: Driver 'pcspkr' is already registered, aborting... |
| [ 2.915563] videodev: Linux video capture interface: v2.00 |
| [ 2.915891] thinkpad_acpi: radio switch found; radios are enabled |
| [ 2.916955] thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode |
| [ 2.917047] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver |
| [ 2.917051] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... |
| [ 2.923713] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked |
| [ 2.939102] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one |
| [ 2.939196] thinkpad_acpi: Console audio control enabled, mode: monitor (read only) |
| [ 2.941300] thinkpad_acpi: battery 1 registered (start 0, stop 100) |
| [ 2.941304] battery: new extension: ThinkPad Battery Extension |
| [ 2.941368] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input8 |
| [ 2.943549] [drm] Replacing VGA console driver |
| [ 2.945892] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b2ea) |
| [ 2.952005] uvcvideo 1-1.6:1.0: Entity type for entity Extension 4 was not initialized! |
| [ 2.952013] uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized! |
| [ 2.952017] uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized! |
| [ 2.952021] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized! |
| [ 2.952100] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input9 |
| [ 2.952171] usbcore: registered new interface driver uvcvideo |
| [ 2.952174] USB Video Class driver (1.1.1) |
| [ 2.977141] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer |
| [ 2.977146] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules |
| [ 2.977148] RAPL PMU: hw unit of domain package 2^-16 Joules |
| [ 2.977150] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules |
| [ 2.981729] Adding 16731132k swap on /dev/sda5. Priority:-2 extents:1 across:16731132k SSFS |
| [ 2.982578] cryptd: max_cpu_qlen set to 1000 |
| [ 2.986339] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' |
| [ 2.988125] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 |
| [ 2.988131] cfg80211: failed to load regulatory.db |
| [ 2.988540] AVX version of gcm_enc/dec engaged. |
| [ 2.988543] AES CTR mode by8 optimization enabled |
| [ 2.993801] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). |
| [ 2.993806] [drm] Driver supports precise vblank timestamp query. |
| [ 3.006106] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem |
| [ 3.011779] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input3 |
| [ 3.025452] Bluetooth: Core ver 2.22 |
| [ 3.025467] NET: Registered protocol family 31 |
| [ 3.025469] Bluetooth: HCI device and connection manager initialized |
| [ 3.025472] Bluetooth: HCI socket layer initialized |
| [ 3.025475] Bluetooth: L2CAP socket layer initialized |
| [ 3.025481] Bluetooth: SCO socket layer initialized |
| [ 3.047679] usbcore: registered new interface driver btusb |
| [ 3.048598] usb 1-1.5: Direct firmware load for ath3k-1.fw failed with error -2 |
| [ 3.048604] Bluetooth: Firmware file "ath3k-1.fw" not found |
| [ 3.048610] ath3k: probe of 1-1.5:1.0 failed with error -2 |
| [ 3.048627] usbcore: registered new interface driver ath3k |
| [ 3.064523] ath: phy0: Set BT/WLAN RX diversity capability |
| [ 3.115963] [drm] Initialized i915 1.6.0 20181204 for 0000:00:02.0 on minor 0 |
| [ 3.116133] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) |
| [ 3.116965] ath: phy0: ASPM enabled: 0x43 |
| [ 3.116969] ath: EEPROM regdomain: 0x60 |
| [ 3.116970] ath: EEPROM indicates we should expect a direct regpair map |
| [ 3.116971] ath: Country alpha2 being used: 00 |
| [ 3.116972] ath: Regpair used: 0x60 |
| [ 3.117636] iTCO_vendor_support: vendor-support=0 |
| [ 3.119869] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 |
| [ 3.119920] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560) |
| [ 3.120011] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) |
| [ 3.127720] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' |
| [ 3.127966] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffb323c1fa0000, irq=17 |
| [ 3.139524] acpi device:0d: registered as cooling_device5 |
| [ 3.139589] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10 |
| [ 3.139701] snd_hda_intel 0000:00:1b.0: Linked as a consumer to 0000:00:02.0 |
| [ 3.139763] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) |
| [ 3.160620] Bluetooth: hci0: BCM: chip id 63 |
| [ 3.161616] Bluetooth: hci0: BCM: features 0x07 |
| [ 3.176325] random: crng init done |
| [ 3.176331] random: 7 urandom warning(s) missed due to ratelimiting |
| [ 3.177622] Bluetooth: hci0: laptop |
| [ 3.178620] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000 |
| [ 3.178642] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-21e6.hcd failed with error -2 |
| [ 3.178648] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-21e6.hcd not found |
| [ 3.204045] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker |
| [ 3.204053] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) |
| [ 3.204057] snd_hda_codec_realtek hdaudioC0D0: hp_outs=2 (0x15/0x1b/0x0/0x0/0x0) |
| [ 3.204061] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 |
| [ 3.204064] snd_hda_codec_realtek hdaudioC0D0: inputs: |
| [ 3.204067] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18 |
| [ 3.204070] snd_hda_codec_realtek hdaudioC0D0: Dock Mic=0x19 |
| [ 3.204073] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12 |
| [ 3.223961] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 |
| [ 3.224253] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 |
| [ 3.224316] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 |
| [ 3.224375] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 |
| [ 3.224434] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 |
| [ 3.224495] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16 |
| [ 3.224559] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17 |
| [ 3.224655] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18 |
| [ 3.232536] ath9k 0000:02:00.0 wlp2s0: renamed from wlan0 |
| [ 3.284331] intel_rapl: Found RAPL domain package |
| [ 3.284337] intel_rapl: Found RAPL domain core |
| [ 3.284339] intel_rapl: Found RAPL domain uncore |
| [ 3.287115] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 |
| [ 3.287121] Bluetooth: BNEP filters: protocol multicast |
| [ 3.287126] Bluetooth: BNEP socket layer initialized |
| [ 3.345435] fbcon: inteldrmfb (fb0) is primary device |
| [ 4.193182] Console: switching to colour frame buffer device 170x48 |
| [ 4.214885] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device |
| [ 4.898705] mei_me 0000:00:16.0: wait hw ready failed |
| [ 4.899223] mei_me 0000:00:16.0: hw_start failed ret = -62 |
| [ 4.899737] mei_me 0000:00:16.0: H_RST is set = 0x80000015 |
| [ 5.144361] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. |
| [ 5.148428] tun: Universal TUN/TAP device driver, 1.6 |
| [ 5.222827] virbr0: port 1(virbr0-nic) entered blocking state |
| [ 5.222831] virbr0: port 1(virbr0-nic) entered disabled state |
| [ 5.223077] device virbr0-nic entered promiscuous mode |
| [ 5.410145] virbr0: port 1(virbr0-nic) entered blocking state |
| [ 5.410152] virbr0: port 1(virbr0-nic) entered listening state |
| [ 5.454585] virbr0: port 1(virbr0-nic) entered disabled state |
| [ 6.132433] wlp2s0: authenticate with 2c:59:8a:70:7a:57 |
| [ 6.146809] wlp2s0: send auth to 2c:59:8a:70:7a:57 (try 1/3) |
| [ 6.250825] wlp2s0: send auth to 2c:59:8a:70:7a:57 (try 2/3) |
| [ 6.276607] wlp2s0: authenticated |
| [ 6.278840] wlp2s0: associate with 2c:59:8a:70:7a:57 (try 1/3) |
| [ 6.341231] wlp2s0: RX AssocResp from 2c:59:8a:70:7a:57 (capab=0x431 status=0 aid=3) |
| [ 6.341469] wlp2s0: associated |
| [ 6.432932] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready |
| [ 6.914752] mei_me 0000:00:16.0: wait hw ready failed |
| [ 6.914761] mei_me 0000:00:16.0: hw_start failed ret = -62 |
| [ 6.914782] mei_me 0000:00:16.0: H_RST is set = 0x80000015 |
| [ 8.930818] mei_me 0000:00:16.0: wait hw ready failed |
| [ 8.930829] mei_me 0000:00:16.0: hw_start failed ret = -62 |
| [ 8.930839] mei_me 0000:00:16.0: reset: reached maximal consecutive resets: disabling the device |
| [ 8.930843] mei_me 0000:00:16.0: reset failed ret = -19 |
| [ 8.930846] mei_me 0000:00:16.0: link layer initialization failed. |
| [ 8.930850] mei_me 0000:00:16.0: init hw failure. |
| [ 8.930982] mei_me 0000:00:16.0: initialization failed. |
| [ 10.377630] Bridge firewalling registered |
| [ 10.411030] Initializing XFRM netlink socket |
| [ 10.942308] Bluetooth: RFCOMM TTY layer initialized |
| [ 10.942317] Bluetooth: RFCOMM socket layer initialized |
| [ 10.942324] Bluetooth: RFCOMM ver 1.11 |
| [ 17.764398] fuse init (API version 7.28) |
| [ 394.664375] atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0). |
| [ 394.664385] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known. |
| [ 394.664762] atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0). |
| [ 394.664778] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known. |
| [ 394.725701] wlp2s0: deauthenticating from 2c:59:8a:70:7a:57 by local choice (Reason: 3=DEAUTH_LEAVING) |
| [ 399.697701] PM: suspend entry (deep) |
| [ 399.697707] PM: Syncing filesystems ... done. |
| [ 399.702284] Freezing user space processes ... (elapsed 0.001 seconds) done. |
| [ 399.704086] OOM killer disabled. |
| [ 399.704087] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. |
| [ 399.705213] printk: Suspending console(s) (use no_console_suspend to debug) |
| [ 399.849578] sd 0:0:0:0: [sda] Synchronizing SCSI cache |
| [ 399.853090] sd 0:0:0:0: [sda] Stopping disk |
| [ 400.050344] e1000e: EEE TX LPI TIMER: 00000011 |
| [ 400.146275] ACPI: EC: interrupt blocked |
| [ 400.185893] ACPI: Preparing to enter system sleep state S3 |
| [ 400.188818] ACPI: EC: event blocked |
| [ 400.188819] ACPI: EC: EC stopped |
| [ 400.188819] PM: Saving platform NVS memory |
| [ 400.188821] Disabling non-boot CPUs ... |
| [ 400.189436] IRQ 19: no longer affine to CPU1 |
| [ 400.189444] IRQ 27: no longer affine to CPU1 |
| [ 400.189449] IRQ 30: no longer affine to CPU1 |
| [ 400.189454] IRQ 31: no longer affine to CPU1 |
| [ 400.190488] smpboot: CPU 1 is now offline |
| [ 400.192383] IRQ 33: no longer affine to CPU2 |
| [ 400.193447] smpboot: CPU 2 is now offline |
| [ 400.195045] IRQ 1: no longer affine to CPU3 |
| [ 400.195050] IRQ 8: no longer affine to CPU3 |
| [ 400.195054] IRQ 9: no longer affine to CPU3 |
| [ 400.195058] IRQ 12: no longer affine to CPU3 |
| [ 400.195062] IRQ 16: no longer affine to CPU3 |
| [ 400.196085] smpboot: CPU 3 is now offline |
| [ 400.198479] ACPI: Low-level resume complete |
| [ 400.198518] ACPI: EC: EC started |
| [ 400.198518] PM: Restoring platform NVS memory |
| [ 400.198840] Enabling non-boot CPUs ... |
| [ 400.199257] x86: Booting SMP configuration: |
| [ 400.199257] smpboot: Booting Node 0 Processor 1 APIC 0x1 |
| [ 400.201819] cache: parent cpu1 should not be sleeping |
| [ 400.202360] CPU1 is up |
| [ 400.202799] smpboot: Booting Node 0 Processor 2 APIC 0x2 |
| [ 400.205275] cache: parent cpu2 should not be sleeping |
| [ 400.205634] CPU2 is up |
| [ 400.206084] smpboot: Booting Node 0 Processor 3 APIC 0x3 |
| [ 400.208691] cache: parent cpu3 should not be sleeping |
| [ 400.209066] CPU3 is up |
| [ 400.215727] ACPI: Waking up from system sleep state S3 |
| [ 400.218505] ACPI: EC: interrupt unblocked |
| [ 400.255318] sdhci-pci 0000:01:00.0: MMC controller base frequency changed to 50Mhz. |
| [ 400.279476] ACPI: EC: event unblocked |
| [ 400.280680] ath: phy0: ASPM enabled: 0x43 |
| [ 400.281230] sd 0:0:0:0: [sda] Starting disk |
| [ 400.534732] usb 1-1.4: reset full-speed USB device number 3 using ehci-pci |
| [ 400.593181] ata3: SATA link down (SStatus 0 SControl 300) |
| [ 400.593281] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [ 400.593309] ata2: SATA link down (SStatus 0 SControl 300) |
| [ 400.594550] ata1.00: supports DRM functions and may not be fully accessible |
| [ 400.663238] ata1.00: supports DRM functions and may not be fully accessible |
| [ 400.717655] ata1.00: configured for UDMA/133 |
| [ 400.722794] usb 1-1.5: reset full-speed USB device number 4 using ehci-pci |
| [ 400.731584] ata1.00: Enabling discard_zeroes_data |
| [ 400.910769] usb 1-1.6: reset high-speed USB device number 5 using ehci-pci |
| [ 400.988610] psmouse serio1: synaptics: queried max coordinates: x [..5768], y [..5062] |
| [ 401.020097] psmouse serio1: synaptics: queried min coordinates: x [1174..], y [790..] |
| [ 401.127059] OOM killer enabled. |
| [ 401.127062] Restarting tasks ... done. |
| [ 401.157193] video LNXVIDEO:00: Restoring backlight state |
| [ 401.206796] PM: suspend exit |
| [ 401.248939] Bluetooth: hci0: BCM: chip id 63 |
| [ 401.249936] Bluetooth: hci0: BCM: features 0x07 |
| [ 401.266070] Bluetooth: hci0: BCM20702A |
| [ 401.266948] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000 |
| [ 401.266965] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-21e6.hcd failed with error -2 |
| [ 401.266968] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-21e6.hcd not found |
| [ 401.375117] e1000e: enp0s25 NIC Link is Down |
| [ 402.884173] wlp2s0: authenticate with 2c:59:8a:70:7a:57 |
| [ 402.898595] wlp2s0: send auth to 2c:59:8a:70:7a:57 (try 1/3) |
| [ 402.999757] wlp2s0: authenticated |
| [ 403.002475] wlp2s0: associate with 2c:59:8a:70:7a:57 (try 1/3) |
| [ 403.076614] wlp2s0: RX AssocResp from 2c:59:8a:70:7a:57 (capab=0x431 status=0 aid=4) |
| [ 403.076841] wlp2s0: associated |
| [ 403.111121] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready |