| [ 0.235000] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) |
| [ 0.235032] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) |
| [ 0.235241] mce: CPU supports 7 MCE banks |
| [ 0.235252] CPU0: Thermal monitoring enabled (TM1) |
| [ 0.235261] process: using mwait in idle threads |
| [ 0.235264] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 |
| [ 0.235266] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 |
| [ 0.235269] Spectre V2 : Mitigation: Full generic retpoline |
| [ 0.235270] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch |
| [ 0.235272] Spectre V2 : Enabling Restricted Speculation for firmware calls |
| [ 0.235281] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier |
| [ 0.235284] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl |
| [ 0.235286] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp |
| [ 0.235436] Freeing SMP alternatives memory: 32K |
| [ 0.237078] TSC deadline timer enabled |
| [ 0.237081] smpboot: CPU0: Intel(R) Core(TM) i7-3520M CPU @ 2.90GHz (family: 0x6, model: 0x3a, stepping: 0x9) |
| [ 0.237174] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. |
| [ 0.237196] ... version: 3 |
| [ 0.237198] ... bit width: 48 |
| [ 0.237200] ... generic registers: 4 |
| [ 0.237201] ... value mask: 0000ffffffffffff |
| [ 0.237203] ... max period: 00007fffffffffff |
| [ 0.237204] ... fixed-purpose events: 3 |
| [ 0.237206] ... event mask: 000000070000000f |
| [ 0.237244] rcu: Hierarchical SRCU implementation. |
| [ 0.237764] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. |
| [ 0.237808] smp: Bringing up secondary CPUs ... |
| [ 0.237893] x86: Booting SMP configuration: |
| [ 0.237895] .... node #0, CPUs: #1 #2 #3 |
| [ 0.242283] smp: Brought up 1 node, 4 CPUs |
| [ 0.242283] smpboot: Max logical packages: 1 |
| [ 0.242283] smpboot: Total of 4 processors activated (23146.32 BogoMIPS) |
| [ 0.244126] devtmpfs: initialized |
| [ 0.244126] x86/mm: Memory block size: 128MB |
| [ 0.244544] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns |
| [ 0.244544] futex hash table entries: 1024 (order: 4, 65536 bytes) |
| [ 0.244544] pinctrl core: initialized pinctrl subsystem |
| [ 0.244544] NET: Registered protocol family 16 |
| [ 0.244544] audit: initializing netlink subsys (disabled) |
| [ 0.244544] audit: type=2000 audit(1545221188.032:1): state=initialized audit_enabled=0 res=1 |
| [ 0.244544] cpuidle: using governor ladder |
| [ 0.244544] cpuidle: using governor menu |
| [ 0.244544] ACPI: bus type PCI registered |
| [ 0.244544] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 |
| [ 0.244544] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) |
| [ 0.244544] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 |
| [ 0.244544] PCI: Using configuration type 1 for base access |
| [ 0.244544] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on |
| [ 0.244815] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages |
| [ 0.244815] ACPI: Added _OSI(Module Device) |
| [ 0.244815] ACPI: Added _OSI(Processor Device) |
| [ 0.244815] ACPI: Added _OSI(3.0 _SCP Extensions) |
| [ 0.244815] ACPI: Added _OSI(Processor Aggregator Device) |
| [ 0.244815] ACPI: Added _OSI(Linux-Dell-Video) |
| [ 0.244815] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) |
| [ 0.248884] ACPI: 2 ACPI AML tables successfully acquired and loaded |
| [ 0.249755] ACPI: EC: EC started |
| [ 0.249757] ACPI: EC: interrupt blocked |
| [ 0.250054] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC |
| [ 0.250057] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62 |
| [ 0.250060] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions |
| [ 0.250062] ACPI: Interpreter enabled |
| [ 0.250077] ACPI: (supports S0 S3 S4 S5) |
| [ 0.250079] ACPI: Using IOAPIC for interrupt routing |
| [ 0.250095] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| [ 0.250213] ACPI: Enabled 1 GPEs in block 00 to 3F |
| [ 0.253482] ACPI: Power Resource [FPWR] (off) |
| [ 0.253755] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) |
| [ 0.253760] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] |
| [ 0.253806] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability LTR] |
| [ 0.253815] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge |
| [ 0.253866] acpi PNP0A08:00: ignoring host bridge window [mem 0x000c4000-0x000c7fff window] (conflicts with Video ROM [mem 0x000c0000-0x000c6bff]) |
| [ 0.254017] PCI host bridge to bus 0000:00 |
| [ 0.254020] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] |
| [ 0.254023] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] |
| [ 0.254025] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] |
| [ 0.254029] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] |
| [ 0.254032] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] |
| [ 0.254034] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window] |
| [ 0.254037] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] |
| [ 0.254040] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] |
| [ 0.254043] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] |
| [ 0.254045] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] |
| [ 0.254048] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] |
| [ 0.254051] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] |
| [ 0.254054] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window] |
| [ 0.254056] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window] |
| [ 0.254059] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window] |
| [ 0.254062] pci_bus 0000:00: root bus resource [mem 0xc2a00001-0xefffffff window] |
| [ 0.254065] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] |
| [ 0.254068] pci_bus 0000:00: root bus resource [bus 00-ff] |
| [ 0.254076] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000 |
| [ 0.254158] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000 |
| [ 0.254168] pci 0000:00:02.0: reg 0x10: [mem 0xe1000000-0xe13fffff 64bit] |
| [ 0.254174] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref] |
| [ 0.254178] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f] |
| [ 0.254247] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000 |
| [ 0.254255] pci 0000:00:04.0: reg 0x10: [mem 0xe1630000-0xe1637fff 64bit] |
| [ 0.254343] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330 |
| [ 0.254367] pci 0000:00:14.0: reg 0x10: [mem 0xe1620000-0xe162ffff 64bit] |
| [ 0.254433] pci 0000:00:14.0: PME# supported from D3hot D3cold |
| [ 0.254532] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000 |
| [ 0.254627] pci 0000:00:16.0: reg 0x10: [mem 0xe1642000-0xe164200f 64bit] |
| [ 0.254952] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold |
| [ 0.255071] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000 |
| [ 0.255089] pci 0000:00:19.0: reg 0x10: [mem 0xe1600000-0xe161ffff] |
| [ 0.255097] pci 0000:00:19.0: reg 0x14: [mem 0xe163c000-0xe163cfff] |
| [ 0.255105] pci 0000:00:19.0: reg 0x18: [io 0x3040-0x305f] |
| [ 0.255162] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold |
| [ 0.255227] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 |
| [ 0.255248] pci 0000:00:1a.0: reg 0x10: [mem 0xe163f000-0xe163f3ff] |
| [ 0.255328] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold |
| [ 0.255399] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300 |
| [ 0.255420] pci 0000:00:1b.0: reg 0x10: [mem 0xe1638000-0xe163bfff 64bit] |
| [ 0.255490] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold |
| [ 0.255566] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400 |
| [ 0.255705] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold |
| [ 0.255804] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400 |
| [ 0.255944] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold |
| [ 0.256042] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400 |
| [ 0.256207] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold |
| [ 0.256306] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 |
| [ 0.256327] pci 0000:00:1d.0: reg 0x10: [mem 0xe1640000-0xe16403ff] |
| [ 0.256407] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold |
| [ 0.256478] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100 |
| [ 0.256642] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601 |
| [ 0.256662] pci 0000:00:1f.2: reg 0x10: [io 0x3080-0x3087] |
| [ 0.256670] pci 0000:00:1f.2: reg 0x14: [io 0x3090-0x3093] |
| [ 0.256678] pci 0000:00:1f.2: reg 0x18: [io 0x3088-0x308f] |
| [ 0.256686] pci 0000:00:1f.2: reg 0x1c: [io 0x3094-0x3097] |
| [ 0.256694] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f] |
| [ 0.256702] pci 0000:00:1f.2: reg 0x24: [mem 0xe163e000-0xe163e7ff] |
| [ 0.256744] pci 0000:00:1f.2: PME# supported from D3hot |
| [ 0.256809] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500 |
| [ 0.256827] pci 0000:00:1f.3: reg 0x10: [mem 0xe1641000-0xe16410ff 64bit] |
| [ 0.256847] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f] |
| [ 0.256923] pci 0000:00:1f.6: [8086:1e24] type 00 class 0x118000 |
| [ 0.256946] pci 0000:00:1f.6: reg 0x10: [mem 0xe163d000-0xe163dfff 64bit] |
| [ 0.257149] pci 0000:01:00.0: [1180:e823] type 00 class 0x080501 |
| [ 0.257191] pci 0000:01:00.0: MMC controller base frequency changed to 50Mhz. |
| [ 0.257244] pci 0000:01:00.0: reg 0x10: [mem 0xe1400000-0xe14000ff] |
| [ 0.257554] pci 0000:01:00.0: supports D1 D2 |
| [ 0.257555] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.257782] pci 0000:00:1c.0: PCI bridge to [bus 01] |
| [ 0.257789] pci 0000:00:1c.0: bridge window [mem 0xe1400000-0xe14fffff] |
| [ 0.257891] pci 0000:02:00.0: [168c:002b] type 00 class 0x028000 |
| [ 0.257969] pci 0000:02:00.0: reg 0x10: [mem 0xe1500000-0xe150ffff 64bit] |
| [ 0.258247] pci 0000:02:00.0: supports D1 |
| [ 0.258248] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold |
| [ 0.258466] pci 0000:00:1c.1: PCI bridge to [bus 02] |
| [ 0.258473] pci 0000:00:1c.1: bridge window [mem 0xe1500000-0xe15fffff] |
| [ 0.258535] pci 0000:00:1c.2: PCI bridge to [bus 03] |
| [ 0.258541] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff] |
| [ 0.258546] pci 0000:00:1c.2: bridge window [mem 0xe0800000-0xe0ffffff] |
| [ 0.258554] pci 0000:00:1c.2: bridge window [mem 0xe0000000-0xe07fffff 64bit pref] |
| [ 0.258702] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.258745] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.258786] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.258826] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.258866] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.258906] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.258945] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.258985] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.259698] ACPI: EC: interrupt unblocked |
| [ 0.259717] ACPI: EC: event unblocked |
| [ 0.259726] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62 |
| [ 0.259730] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events |
| [ 0.259797] pci 0000:00:02.0: vgaarb: setting as boot VGA device |
| [ 0.259797] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none |
| [ 0.259797] pci 0000:00:02.0: vgaarb: bridge control possible |
| [ 0.259797] vgaarb: loaded |
| [ 0.259875] pps_core: LinuxPPS API ver. 1 registered |
| [ 0.259877] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> |
| [ 0.259881] PTP clock support registered |
| [ 0.259888] EDAC MC: Ver: 3.0.0 |
| [ 0.259979] PCI: Using ACPI for IRQ routing |
| [ 0.261350] PCI: pci_cache_line_size set to 64 bytes |
| [ 0.261435] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] |
| [ 0.261436] e820: reserve RAM buffer [mem 0xbff24000-0xbfffffff] |
| [ 0.261437] e820: reserve RAM buffer [mem 0x23d600000-0x23fffffff] |
| [ 0.261532] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 |
| [ 0.261532] hpet0: 8 comparators, 64-bit 14.318180 MHz counter |
| [ 0.261917] clocksource: Switched to clocksource tsc-early |
| [ 0.268187] VFS: Disk quotas dquot_6.6.0 |
| [ 0.268210] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) |
| [ 0.268277] pnp: PnP ACPI init |
| [ 0.268417] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved |
| [ 0.268421] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved |
| [ 0.268424] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved |
| [ 0.268426] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved |
| [ 0.268429] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved |
| [ 0.268432] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved |
| [ 0.268435] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved |
| [ 0.268437] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved |
| [ 0.268440] system 00:00: [mem 0x20000000-0x201fffff] could not be reserved |
| [ 0.268443] system 00:00: [mem 0x40000000-0x401fffff] could not be reserved |
| [ 0.268449] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) |
| [ 0.268858] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved |
| [ 0.268864] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) |
| [ 0.268896] system 00:02: [io 0x0500-0x057f] has been reserved |
| [ 0.268899] system 00:02: [io 0x0480-0x04bf] has been reserved |
| [ 0.268904] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) |
| [ 0.268921] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) |
| [ 0.268948] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) |
| [ 0.268969] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active) |
| [ 0.268991] pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active) |
| [ 0.269006] pnp: PnP ACPI: found 7 devices |
| [ 0.274632] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns |
| [ 0.274677] pci 0000:00:1c.0: PCI bridge to [bus 01] |
| [ 0.274685] pci 0000:00:1c.0: bridge window [mem 0xe1400000-0xe14fffff] |
| [ 0.274698] pci 0000:00:1c.1: PCI bridge to [bus 02] |
| [ 0.274705] pci 0000:00:1c.1: bridge window [mem 0xe1500000-0xe15fffff] |
| [ 0.274718] pci 0000:00:1c.2: PCI bridge to [bus 03] |
| [ 0.274721] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff] |
| [ 0.274729] pci 0000:00:1c.2: bridge window [mem 0xe0800000-0xe0ffffff] |
| [ 0.274735] pci 0000:00:1c.2: bridge window [mem 0xe0000000-0xe07fffff 64bit pref] |
| [ 0.274746] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] |
| [ 0.274747] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] |
| [ 0.274748] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] |
| [ 0.274749] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] |
| [ 0.274751] pci_bus 0000:00: resource 8 [mem 0x000c8000-0x000cbfff window] |
| [ 0.274752] pci_bus 0000:00: resource 9 [mem 0x000cc000-0x000cffff window] |
| [ 0.274753] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window] |
| [ 0.274754] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window] |
| [ 0.274755] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window] |
| [ 0.274757] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window] |
| [ 0.274758] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window] |
| [ 0.274759] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window] |
| [ 0.274760] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window] |
| [ 0.274761] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window] |
| [ 0.274762] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff window] |
| [ 0.274764] pci_bus 0000:00: resource 19 [mem 0xc2a00001-0xefffffff window] |
| [ 0.274765] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed44fff window] |
| [ 0.274766] pci_bus 0000:01: resource 1 [mem 0xe1400000-0xe14fffff] |
| [ 0.274768] pci_bus 0000:02: resource 1 [mem 0xe1500000-0xe15fffff] |
| [ 0.274769] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff] |
| [ 0.274770] pci_bus 0000:03: resource 1 [mem 0xe0800000-0xe0ffffff] |
| [ 0.274771] pci_bus 0000:03: resource 2 [mem 0xe0000000-0xe07fffff 64bit pref] |
| [ 0.274847] NET: Registered protocol family 2 |
| [ 0.274975] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes) |
| [ 0.275006] TCP established hash table entries: 65536 (order: 7, 524288 bytes) |
| [ 0.275140] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) |
| [ 0.275350] TCP: Hash tables configured (established 65536 bind 65536) |
| [ 0.275378] UDP hash table entries: 4096 (order: 5, 131072 bytes) |
| [ 0.275409] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) |
| [ 0.275473] NET: Registered protocol family 1 |
| [ 0.275486] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] |
| [ 0.275969] PCI: CLS 64 bytes, default 64 |
| [ 0.276003] Unpacking initramfs... |
| [ 0.608327] Freeing initrd memory: 22512K |
| [ 0.608425] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) |
| [ 0.608428] software IO TLB: mapped [mem 0xbbf24000-0xbff24000] (64MB) |
| [ 0.608996] Initialise system trusted keyrings |
| [ 0.609043] workingset: timestamp_bits=40 max_order=21 bucket_order=0 |
| [ 0.609070] zbud: loaded |
| [ 0.902360] Key type asymmetric registered |
| [ 0.902363] Asymmetric key parser 'x509' registered |
| [ 0.902376] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) |
| [ 0.902407] io scheduler noop registered |
| [ 0.902409] io scheduler deadline registered |
| [ 0.902423] io scheduler cfq registered (default) |
| [ 0.902425] io scheduler mq-deadline registered |
| [ 0.902427] io scheduler kyber registered |
| [ 0.902685] pcieport 0000:00:1c.0: Signaling PME with IRQ 26 |
| [ 0.902892] pcieport 0000:00:1c.1: Signaling PME with IRQ 27 |
| [ 0.903094] pcieport 0000:00:1c.2: Signaling PME with IRQ 28 |
| [ 0.903122] pciehp 0000:00:1c.2:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+ |
| [ 0.903247] intel_idle: MWAIT substates: 0x21120 |
| [ 0.903248] intel_idle: v0.4.1 model 0x3A |
| [ 0.903392] intel_idle: lapic_timer_reliable_states 0xffffffff |
| [ 0.904007] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
| [ 0.904474] Linux agpgart interface v0.103 |
| [ 0.911908] tpm_tis 00:06: 1.2 TPM (device-id 0x0, rev-id 78) |
| [ 0.964253] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de> |
| [ 0.964256] AMD IOMMUv2 functionality not available on this system |
| [ 0.964768] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 |
| [ 0.966712] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| [ 0.966719] serio: i8042 AUX port at 0x60,0x64 irq 12 |
| [ 0.966949] mousedev: PS/2 mouse device common for all mice |
| [ 0.966999] rtc_cmos 00:03: RTC can wake from S4 |
| [ 0.967205] rtc_cmos 00:03: registered as rtc0 |
| [ 0.967227] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs |
| [ 0.967239] intel_pstate: Intel P-state driver initializing |
| [ 0.967551] ledtrig-cpu: registered to indicate activity on CPUs |
| [ 0.967933] NET: Registered protocol family 10 |
| [ 0.968334] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 |
| [ 0.968339] Segment Routing with IPv6 |
| [ 0.968390] mip6: Mobile IPv6 |
| [ 0.968397] NET: Registered protocol family 17 |
| [ 0.968408] mpls_gso: MPLS GSO support |
| [ 0.968965] microcode: sig=0x306a9, pf=0x10, revision=0x20 |
| [ 0.969077] microcode: Microcode Update Driver: v2.2. |
| [ 0.969095] sched_clock: Marking stable (968357525, 707226)->(977506433, -8441682) |
| [ 0.969473] registered taskstats version 1 |
| [ 0.969478] Loading compiled-in X.509 certificates |
| [ 0.969510] zswap: loaded using pool lzo/zbud |
| [ 0.969676] ima: Allocated hash algorithm: sha256 |
| [ 1.100680] rtc_cmos 00:03: setting system clock to 2018-12-19 12:06:28 UTC (1545221188) |
| [ 1.102878] Freeing unused kernel image memory: 1592K |
| [ 1.115893] Write protecting the kernel read-only data: 16384k |
| [ 1.116716] Freeing unused kernel image memory: 2016K |
| [ 1.117101] Freeing unused kernel image memory: 936K |
| [ 1.128059] x86/mm: Checked W+X mappings: passed, no W+X pages found. |
| [ 1.128062] x86/mm: Checking user space page tables |
| [ 1.134751] x86/mm: Checked W+X mappings: passed, no W+X pages found. |
| [ 1.134754] Run /init as init process |
| [ 1.199623] random: systemd-udevd: uninitialized urandom read (16 bytes read) |
| [ 1.199686] random: systemd-udevd: uninitialized urandom read (16 bytes read) |
| [ 1.199695] random: systemd-udevd: uninitialized urandom read (16 bytes read) |
| [ 1.221598] thermal LNXTHERM:00: registered as thermal_zone0 |
| [ 1.221605] ACPI: Thermal Zone [THM0] (49 C) |
| [ 1.222548] thermal LNXTHERM:01: registered as thermal_zone1 |
| [ 1.222553] ACPI: Thermal Zone [THM1] (27 C) |
| [ 1.223996] ACPI: bus type USB registered |
| [ 1.224025] usbcore: registered new interface driver usbfs |
| [ 1.224038] usbcore: registered new interface driver hub |
| [ 1.225619] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt |
| [ 1.225743] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k |
| [ 1.225747] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. |
| [ 1.225812] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode |
| [ 1.228810] SCSI subsystem initialized |
| [ 1.228951] sdhci: Secure Digital Host Controller Interface driver |
| [ 1.228955] sdhci: Copyright(c) Pierre Ossman |
| [ 1.231371] usbcore: registered new device driver usb |
| [ 1.233510] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| [ 1.233709] ehci-pci: EHCI PCI platform driver |
| [ 1.233863] ehci-pci 0000:00:1a.0: EHCI Host Controller |
| [ 1.233873] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 |
| [ 1.233890] ehci-pci 0000:00:1a.0: debug port 2 |
| [ 1.237808] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported |
| [ 1.237900] ehci-pci 0000:00:1a.0: irq 21, io mem 0xe163f000 |
| [ 1.237955] libata version 3.00 loaded. |
| [ 1.238816] sdhci-pci 0000:01:00.0: SDHCI controller found [1180:e823] (rev 4) |
| [ 1.239030] ahci 0000:00:1f.2: version 3.0 |
| [ 1.241812] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes |
| [ 1.241866] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled |
| [ 1.242209] mmc0: SDHCI controller on PCI [0000:01:00.0] using DMA |
| [ 1.251897] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 |
| [ 1.251979] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl SATA mode |
| [ 1.251981] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.20 |
| [ 1.251982] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.251986] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst |
| [ 1.251991] usb usb1: Product: EHCI Host Controller |
| [ 1.251993] usb usb1: Manufacturer: Linux 4.20.0-rc7-00001-g33d43b5b46b9 ehci_hcd |
| [ 1.251995] usb usb1: SerialNumber: 0000:00:1a.0 |
| [ 1.252134] hub 1-0:1.0: USB hub found |
| [ 1.252144] hub 1-0:1.0: 3 ports detected |
| [ 1.252431] ehci-pci 0000:00:1d.0: EHCI Host Controller |
| [ 1.252440] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 |
| [ 1.252455] ehci-pci 0000:00:1d.0: debug port 2 |
| [ 1.252510] scsi host0: ahci |
| [ 1.252589] scsi host1: ahci |
| [ 1.253153] scsi host2: ahci |
| [ 1.253213] scsi host3: ahci |
| [ 1.253356] scsi host4: ahci |
| [ 1.253446] scsi host5: ahci |
| [ 1.253478] ata1: SATA max UDMA/133 abar m2048@0xe163e000 port 0xe163e100 irq 30 |
| [ 1.253481] ata2: SATA max UDMA/133 abar m2048@0xe163e000 port 0xe163e180 irq 30 |
| [ 1.253485] ata3: SATA max UDMA/133 abar m2048@0xe163e000 port 0xe163e200 irq 30 |
| [ 1.253487] ata4: DUMMY |
| [ 1.253488] ata5: DUMMY |
| [ 1.253489] ata6: DUMMY |
| [ 1.256361] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported |
| [ 1.256378] ehci-pci 0000:00:1d.0: irq 19, io mem 0xe1640000 |
| [ 1.271940] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 |
| [ 1.272018] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.20 |
| [ 1.272037] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.272040] usb usb2: Product: EHCI Host Controller |
| [ 1.272043] usb usb2: Manufacturer: Linux 4.20.0-rc7-00001-g33d43b5b46b9 ehci_hcd |
| [ 1.272046] usb usb2: SerialNumber: 0000:00:1d.0 |
| [ 1.272274] hub 2-0:1.0: USB hub found |
| [ 1.272287] hub 2-0:1.0: 3 ports detected |
| [ 1.272485] xhci_hcd 0000:00:14.0: xHCI Host Controller |
| [ 1.272499] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 |
| [ 1.273578] xhci_hcd 0000:00:14.0: hcc params 0x200071a1 hci version 0x100 quirks 0x000000000000b930 |
| [ 1.273588] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported |
| [ 1.273770] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.20 |
| [ 1.273775] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.273779] usb usb3: Product: xHCI Host Controller |
| [ 1.273782] usb usb3: Manufacturer: Linux 4.20.0-rc7-00001-g33d43b5b46b9 xhci-hcd |
| [ 1.273785] usb usb3: SerialNumber: 0000:00:14.0 |
| [ 1.273948] hub 3-0:1.0: USB hub found |
| [ 1.273964] hub 3-0:1.0: 4 ports detected |
| [ 1.274148] xhci_hcd 0000:00:14.0: xHCI Host Controller |
| [ 1.274156] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 |
| [ 1.274163] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed |
| [ 1.274215] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.20 |
| [ 1.274220] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.274224] usb usb4: Product: xHCI Host Controller |
| [ 1.274228] usb usb4: Manufacturer: Linux 4.20.0-rc7-00001-g33d43b5b46b9 xhci-hcd |
| [ 1.274233] usb usb4: SerialNumber: 0000:00:14.0 |
| [ 1.274395] hub 4-0:1.0: USB hub found |
| [ 1.274411] hub 4-0:1.0: 4 ports detected |
| [ 1.373953] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock |
| [ 1.498824] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 3c:97:0e:5f:1b:41 |
| [ 1.498828] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection |
| [ 1.498882] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF |
| [ 1.500041] e1000e 0000:00:19.0 enp0s25: renamed from eth0 |
| [ 1.566391] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [ 1.566771] ata1.00: supports DRM functions and may not be fully accessible |
| [ 1.567631] ata1.00: ATA-10: Crucial_CT525MX300SSD1, M0CR060, max UDMA/133 |
| [ 1.567642] ata1.00: 1025610768 sectors, multi 16: LBA48 NCQ (depth 32), AA |
| [ 1.570007] ata1.00: supports DRM functions and may not be fully accessible |
| [ 1.572877] ata1.00: configured for UDMA/133 |
| [ 1.583418] scsi 0:0:0:0: Direct-Access ATA Crucial_CT525MX3 R060 PQ: 0 ANSI: 5 |
| [ 1.587897] usb 1-1: new high-speed USB device number 2 using ehci-pci |
| [ 1.607900] usb 2-1: new high-speed USB device number 2 using ehci-pci |
| [ 1.619901] tsc: Refined TSC clocksource calibration: 2893.425 MHz |
| [ 1.619920] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29b4fff0c46, max_idle_ns: 440795237523 ns |
| [ 1.619963] clocksource: Switched to clocksource tsc |
| [ 1.744287] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 |
| [ 1.744299] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 1.744700] hub 1-1:1.0: USB hub found |
| [ 1.744876] hub 1-1:1.0: 6 ports detected |
| [ 1.764266] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 |
| [ 1.764278] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 1.764539] hub 2-1:1.0: USB hub found |
| [ 1.764603] hub 2-1:1.0: 8 ports detected |
| [ 1.898429] ata2: SATA link down (SStatus 0 SControl 300) |
| [ 1.942221] random: fast init done |
| [ 1.988720] psmouse serio1: synaptics: queried max coordinates: x [..5768], y [..5062] |
| [ 2.018905] psmouse serio1: synaptics: queried min coordinates: x [1174..], y [790..] |
| [ 2.031897] usb 1-1.4: new full-speed USB device number 3 using ehci-pci |
| [ 2.077215] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd002a3/0x940300/0x123800/0x0, board id: 1611, fw id: 1099905 |
| [ 2.077237] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0 |
| [ 2.115781] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2 |
| [ 2.144133] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=21e6, bcdDevice= 1.12 |
| [ 2.144145] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [ 2.144152] usb 1-1.4: Product: BCM20702A0 |
| [ 2.144157] usb 1-1.4: Manufacturer: Broadcom Corp |
| [ 2.144162] usb 1-1.4: SerialNumber: 7CE9D3E5DCBD |
| [ 2.214376] ata3: SATA link down (SStatus 0 SControl 300) |
| [ 2.219137] ata1.00: Enabling discard_zeroes_data |
| [ 2.219290] sd 0:0:0:0: [sda] 1025610768 512-byte logical blocks: (525 GB/489 GiB) |
| [ 2.219308] sd 0:0:0:0: [sda] Write Protect is off |
| [ 2.219312] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 |
| [ 2.219335] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 2.219452] ata1.00: Enabling discard_zeroes_data |
| [ 2.220400] sda: sda1 sda2 < sda5 > |
| [ 2.220560] ata1.00: Enabling discard_zeroes_data |
| [ 2.220684] sd 0:0:0:0: [sda] Attached SCSI disk |
| [ 2.223873] usb 1-1.5: new full-speed USB device number 4 using ehci-pci |
| [ 2.266866] PM: Image not found (code -22) |
| [ 2.336032] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) |
| [ 2.340843] usb 1-1.5: New USB device found, idVendor=13d3, idProduct=3304, bcdDevice= 0.01 |
| [ 2.340847] usb 1-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 2.419879] usb 1-1.6: new high-speed USB device number 5 using ehci-pci |
| [ 2.444314] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) |
| [ 2.464212] systemd[1]: Detected architecture x86-64. |
| [ 2.467533] systemd[1]: Set hostname to <laptop>. |
| [ 2.539728] usb 1-1.6: New USB device found, idVendor=04f2, idProduct=b2ea, bcdDevice= 5.18 |
| [ 2.539735] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 2.539738] usb 1-1.6: Product: Integrated Camera |
| [ 2.539739] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd. |
| [ 2.547743] systemd[1]: Listening on LVM2 metadata daemon socket. |
| [ 2.547882] systemd[1]: Started Forward Password Requests to Wall Directory Watch. |
| [ 2.548049] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. |
| [ 2.548103] systemd[1]: Listening on fsck to fsckd communication Socket. |
| [ 2.548175] systemd[1]: Listening on Journal Audit Socket. |
| [ 2.548209] systemd[1]: Reached target Remote File Systems. |
| [ 2.548257] systemd[1]: Listening on udev Kernel Socket. |
| [ 2.674617] lp: driver loaded but no devices found |
| [ 2.693469] ppdev: user-space parallel port driver |
| [ 2.749017] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 |
| [ 2.756295] Key type encrypted registered |
| [ 2.788391] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro |
| [ 2.813394] systemd-journald[231]: Received request to flush runtime journal from PID 1 |
| [ 2.895749] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:29/PNP0C09:00/PNP0C0E:00/input/input4 |
| [ 2.895887] ACPI: Sleep Button [SLPB] |
| [ 2.895946] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:29/PNP0C09:00/PNP0C0D:00/input/input5 |
| [ 2.895958] ACPI: Lid Switch [LID] |
| [ 2.896011] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6 |
| [ 2.896022] ACPI: Power Button [PWRF] |
| [ 2.945407] ACPI: AC Adapter [AC] (off-line) |
| [ 2.946493] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input3 |
| [ 2.954502] battery: ACPI: Battery Slot [BAT0] (battery present) |
| [ 2.954645] battery: ACPI: Battery Slot [BAT1] (battery absent) |
| [ 2.981611] sd 0:0:0:0: Attached scsi generic sg0 type 0 |
| [ 2.983844] cfg80211: Loading compiled-in X.509 certificates for regulatory database |
| [ 2.993899] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20181003/utaddress-213) |
| [ 2.993912] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 2.993917] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20181003/utaddress-213) |
| [ 2.993924] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 2.993928] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20181003/utaddress-213) |
| [ 2.993934] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 2.993938] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20181003/utaddress-213) |
| [ 2.993944] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 2.993947] lpc_ich: Resource conflict(s) found affecting gpio_ich |
| [ 3.024448] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' |
| [ 3.027667] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 |
| [ 3.027672] cfg80211: failed to load regulatory.db |
| [ 3.054270] Non-volatile memory driver v1.3 |
| [ 3.070775] input: PC Speaker as /devices/platform/pcspkr/input/input7 |
| [ 3.072474] Bluetooth: Core ver 2.22 |
| [ 3.072492] NET: Registered protocol family 31 |
| [ 3.072495] Bluetooth: HCI device and connection manager initialized |
| [ 3.072501] Bluetooth: HCI socket layer initialized |
| [ 3.072505] Bluetooth: L2CAP socket layer initialized |
| [ 3.072510] Bluetooth: SCO socket layer initialized |
| [ 3.074761] thinkpad_acpi: ThinkPad ACPI Extras v0.26 |
| [ 3.074773] thinkpad_acpi: http://ibm-acpi.sf.net/ |
| [ 3.074776] thinkpad_acpi: ThinkPad BIOS CBET4000 4.8-2601-g2ca2acc51f-dirty, EC G2HT35WW-3.22 |
| [ 3.074779] thinkpad_acpi: Lenovo ThinkPad X230, model 232566G |
| [ 3.084288] thinkpad_acpi: radio switch found; radios are enabled |
| [ 3.084409] thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode |
| [ 3.084499] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver |
| [ 3.084503] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... |
| [ 3.086414] Error: Driver 'pcspkr' is already registered, aborting... |
| [ 3.087687] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked |
| [ 3.087740] media: Linux media interface: v0.10 |
| [ 3.090967] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one |
| [ 3.091046] thinkpad_acpi: Console audio control enabled, mode: monitor (read only) |
| [ 3.092632] thinkpad_acpi: battery 1 registered (start 0, stop 0) |
| [ 3.092637] battery: new extension: ThinkPad Battery Extension |
| [ 3.092865] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input8 |
| [ 3.137191] usbcore: registered new interface driver btusb |
| [ 3.143066] videodev: Linux video capture interface: v2.00 |
| [ 3.145811] [drm] Replacing VGA console driver |
| [ 3.148410] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer |
| [ 3.148417] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules |
| [ 3.148420] RAPL PMU: hw unit of domain package 2^-16 Joules |
| [ 3.148422] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules |
| [ 3.150027] usb 1-1.5: Direct firmware load for ath3k-1.fw failed with error -2 |
| [ 3.150031] Bluetooth: Firmware file "ath3k-1.fw" not found |
| [ 3.150035] ath3k: probe of 1-1.5:1.0 failed with error -2 |
| [ 3.150050] usbcore: registered new interface driver ath3k |
| [ 3.155828] Adding 16731132k swap on /dev/sda5. Priority:-2 extents:1 across:16731132k SSFS |
| [ 3.196343] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). |
| [ 3.196350] [drm] Driver supports precise vblank timestamp query. |
| [ 3.196578] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem |
| [ 3.254198] Bluetooth: hci0: BCM: chip id 63 |
| [ 3.255213] Bluetooth: hci0: BCM: features 0x07 |
| [ 3.264609] [drm] Initialized i915 1.6.0 20180921 for 0000:00:02.0 on minor 0 |
| [ 3.264761] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) |
| [ 3.271212] Bluetooth: hci0: BCM20702A |
| [ 3.272214] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000 |
| [ 3.272249] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-21e6.hcd failed with error -2 |
| [ 3.272269] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-21e6.hcd not found |
| [ 3.289055] acpi device:0d: registered as cooling_device5 |
| [ 3.289173] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9 |
| [ 3.289421] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) |
| [ 3.494523] fbcon: inteldrmfb (fb0) is primary device |
| [ 3.515516] iTCO_vendor_support: vendor-support=0 |
| [ 3.528500] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker |
| [ 3.528502] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) |
| [ 3.528503] snd_hda_codec_realtek hdaudioC0D0: hp_outs=2 (0x15/0x1b/0x0/0x0/0x0) |
| [ 3.528504] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 |
| [ 3.528505] snd_hda_codec_realtek hdaudioC0D0: inputs: |
| [ 3.528506] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18 |
| [ 3.528507] snd_hda_codec_realtek hdaudioC0D0: Dock Mic=0x19 |
| [ 3.528508] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12 |
| [ 3.536831] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 |
| [ 3.536890] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560) |
| [ 3.539613] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) |
| [ 3.539927] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b2ea) |
| [ 3.541396] cryptd: max_cpu_qlen set to 1000 |
| [ 3.542485] ath: phy0: Set BT/WLAN RX diversity capability |
| [ 3.550553] uvcvideo 1-1.6:1.0: Entity type for entity Extension 4 was not initialized! |
| [ 3.550556] uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized! |
| [ 3.550558] uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized! |
| [ 3.550559] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized! |
| [ 3.550632] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input15 |
| [ 3.550692] usbcore: registered new interface driver uvcvideo |
| [ 3.550693] USB Video Class driver (1.1.1) |
| [ 3.594617] ath: phy0: ASPM enabled: 0x43 |
| [ 3.594619] ath: EEPROM regdomain: 0x60 |
| [ 3.594620] ath: EEPROM indicates we should expect a direct regpair map |
| [ 3.594621] ath: Country alpha2 being used: 00 |
| [ 3.594622] ath: Regpair used: 0x60 |
| [ 3.598714] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' |
| [ 3.598995] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffba4b813c0000, irq=17 |
| [ 3.600950] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 |
| [ 3.601251] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 |
| [ 3.601303] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 |
| [ 3.601358] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 |
| [ 3.601415] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 |
| [ 3.601482] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16 |
| [ 3.602014] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17 |
| [ 3.602073] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18 |
| [ 3.605584] AVX version of gcm_enc/dec engaged. |
| [ 3.605585] AES CTR mode by8 optimization enabled |
| [ 3.648607] ath9k 0000:02:00.0 wlp2s0: renamed from wlan0 |
| [ 3.930044] intel_rapl: Found RAPL domain package |
| [ 3.930046] intel_rapl: Found RAPL domain core |
| [ 3.930048] intel_rapl: Found RAPL domain uncore |
| [ 4.308620] Console: switching to colour frame buffer device 172x48 |
| [ 4.345774] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device |
| [ 4.807791] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 |
| [ 4.808372] Bluetooth: BNEP filters: protocol multicast |
| [ 4.808870] Bluetooth: BNEP socket layer initialized |
| [ 5.011880] mei_me 0000:00:16.0: wait hw ready failed |
| [ 5.012403] mei_me 0000:00:16.0: hw_start failed ret = -62 |
| [ 5.012917] mei_me 0000:00:16.0: H_RST is set = 0x80000015 |
| [ 5.567967] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready |
| [ 5.828293] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready |
| [ 5.832520] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| [ 5.849023] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| [ 5.872737] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| [ 5.945710] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| [ 6.330760] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. |
| [ 6.337135] tun: Universal TUN/TAP device driver, 1.6 |
| [ 6.400135] virbr0: port 1(virbr0-nic) entered blocking state |
| [ 6.400142] virbr0: port 1(virbr0-nic) entered disabled state |
| [ 6.400299] device virbr0-nic entered promiscuous mode |
| [ 6.560069] virbr0: port 1(virbr0-nic) entered blocking state |
| [ 6.560075] virbr0: port 1(virbr0-nic) entered listening state |
| [ 6.590832] virbr0: port 1(virbr0-nic) entered disabled state |
| [ 7.027878] mei_me 0000:00:16.0: wait hw ready failed |
| [ 7.027883] mei_me 0000:00:16.0: hw_start failed ret = -62 |
| [ 7.027897] mei_me 0000:00:16.0: H_RST is set = 0x80000015 |
| [ 7.068112] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| [ 7.120995] wlp2s0: authenticate with e8:df:70:34:c3:00 |
| [ 7.135339] wlp2s0: send auth to e8:df:70:34:c3:00 (try 1/3) |
| [ 7.138962] wlp2s0: authenticated |
| [ 7.139909] wlp2s0: associate with e8:df:70:34:c3:00 (try 1/3) |
| [ 7.146028] wlp2s0: RX AssocResp from e8:df:70:34:c3:00 (capab=0x431 status=0 aid=4) |
| [ 7.146242] wlp2s0: associated |
| [ 7.152898] ath: EEPROM regdomain: 0x8028 |
| [ 7.152900] ath: EEPROM indicates we should expect a country code |
| [ 7.152902] ath: doing EEPROM country->regdmn map search |
| [ 7.152903] ath: country maps to regdmn code: 0x37 |
| [ 7.152904] ath: Country alpha2 being used: AT |
| [ 7.152905] ath: Regpair used: 0x37 |
| [ 7.152906] ath: regdomain 0x8028 dynamically updated by country element |
| [ 7.179226] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready |
| [ 9.043959] mei_me 0000:00:16.0: wait hw ready failed |
| [ 9.043976] mei_me 0000:00:16.0: hw_start failed ret = -62 |
| [ 9.043991] mei_me 0000:00:16.0: reset: reached maximal consecutive resets: disabling the device |
| [ 9.044000] mei_me 0000:00:16.0: reset failed ret = -19 |
| [ 9.044008] mei_me 0000:00:16.0: link layer initialization failed. |
| [ 9.044016] mei_me 0000:00:16.0: init hw failure. |
| [ 9.044142] mei_me 0000:00:16.0: initialization failed. |
| [ 12.211960] random: crng init done |
| [ 12.211976] random: 7 urandom warning(s) missed due to ratelimiting |
| [ 12.672084] Bridge firewalling registered |
| [ 12.847461] Initializing XFRM netlink socket |
| [ 12.881006] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready |
| [ 14.183669] Bluetooth: RFCOMM TTY layer initialized |
| [ 14.183678] Bluetooth: RFCOMM socket layer initialized |
| [ 14.183686] Bluetooth: RFCOMM ver 1.11 |
| [ 20.544182] fuse init (API version 7.28) |
| [ 844.804248] atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0). |
| [ 844.804260] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known. |
| [ 844.804607] atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0). |
| [ 844.804623] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known. |
| [ 844.845989] wlp2s0: deauthenticating from e8:df:70:34:c3:00 by local choice (Reason: 3=DEAUTH_LEAVING) |
| [ 844.887794] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| [ 848.742199] PM: suspend entry (deep) |
| [ 848.742203] PM: Syncing filesystems ... done. |
| [ 848.753204] Freezing user space processes ... (elapsed 0.001 seconds) done. |
| [ 848.755156] OOM killer disabled. |
| [ 848.755157] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. |
| [ 848.756302] printk: Suspending console(s) (use no_console_suspend to debug) |
| [ 848.899181] sd 0:0:0:0: [sda] Synchronizing SCSI cache |
| [ 848.902633] sd 0:0:0:0: [sda] Stopping disk |
| [ 849.091504] e1000e: EEE TX LPI TIMER: 00000011 |
| [ 849.188017] ACPI: EC: interrupt blocked |
| [ 849.227634] ACPI: Preparing to enter system sleep state S3 |
| [ 849.230600] ACPI: EC: event blocked |
| [ 849.230601] ACPI: EC: EC stopped |
| [ 849.230602] PM: Saving platform NVS memory |
| [ 849.230603] Disabling non-boot CPUs ... |
| [ 849.243588] IRQ 21: no longer affine to CPU1 |
| [ 849.243595] IRQ 26: no longer affine to CPU1 |
| [ 849.243599] IRQ 27: no longer affine to CPU1 |
| [ 849.243606] IRQ 33: no longer affine to CPU1 |
| [ 849.244620] smpboot: CPU 1 is now offline |
| [ 849.263681] IRQ 30: no longer affine to CPU2 |
| [ 849.264713] smpboot: CPU 2 is now offline |
| [ 849.279425] IRQ 1: no longer affine to CPU3 |
| [ 849.279431] IRQ 8: no longer affine to CPU3 |
| [ 849.279435] IRQ 9: no longer affine to CPU3 |
| [ 849.279439] IRQ 12: no longer affine to CPU3 |
| [ 849.279443] IRQ 17: no longer affine to CPU3 |
| [ 849.280476] smpboot: CPU 3 is now offline |
| [ 849.283110] ACPI: Low-level resume complete |
| [ 849.283147] ACPI: EC: EC started |
| [ 849.283147] PM: Restoring platform NVS memory |
| [ 849.283482] Enabling non-boot CPUs ... |
| [ 849.283897] x86: Booting SMP configuration: |
| [ 849.283897] smpboot: Booting Node 0 Processor 1 APIC 0x1 |
| [ 849.286438] cache: parent cpu1 should not be sleeping |
| [ 849.286939] CPU1 is up |
| [ 849.287336] smpboot: Booting Node 0 Processor 2 APIC 0x2 |
| [ 849.289807] cache: parent cpu2 should not be sleeping |
| [ 849.290155] CPU2 is up |
| [ 849.290584] smpboot: Booting Node 0 Processor 3 APIC 0x3 |
| [ 849.293053] cache: parent cpu3 should not be sleeping |
| [ 849.293424] CPU3 is up |
| [ 849.296777] ACPI: Waking up from system sleep state S3 |
| [ 849.299195] ACPI: EC: interrupt unblocked |
| [ 849.340890] sdhci-pci 0000:01:00.0: MMC controller base frequency changed to 50Mhz. |
| [ 849.359865] ACPI: EC: event unblocked |
| [ 849.361085] ath: phy0: ASPM enabled: 0x43 |
| [ 849.364570] sd 0:0:0:0: [sda] Starting disk |
| [ 849.616786] usb 1-1.4: reset full-speed USB device number 3 using ehci-pci |
| [ 849.675980] ata2: SATA link down (SStatus 0 SControl 300) |
| [ 849.676020] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [ 849.676057] ata3: SATA link down (SStatus 0 SControl 300) |
| [ 849.681563] ata1.00: supports DRM functions and may not be fully accessible |
| [ 849.749556] ata1.00: supports DRM functions and may not be fully accessible |
| [ 849.803678] ata1.00: configured for UDMA/133 |
| [ 849.804739] usb 1-1.5: reset full-speed USB device number 4 using ehci-pci |
| [ 849.817195] ata1.00: Enabling discard_zeroes_data |
| [ 849.992729] usb 1-1.6: reset high-speed USB device number 5 using ehci-pci |
| [ 850.067946] psmouse serio1: synaptics: queried max coordinates: x [..5768], y [..5062] |
| [ 850.099505] psmouse serio1: synaptics: queried min coordinates: x [1174..], y [790..] |
| [ 850.206618] OOM killer enabled. |
| [ 850.206621] Restarting tasks ... done. |
| [ 850.250050] video LNXVIDEO:00: Restoring backlight state |
| [ 850.284802] PM: suspend exit |
| [ 850.327427] Bluetooth: hci0: BCM: chip id 63 |
| [ 850.328379] Bluetooth: hci0: BCM: features 0x07 |
| [ 850.344349] Bluetooth: hci0: BCM20702A |
| [ 850.348357] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000 |
| [ 850.348373] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-21e6.hcd failed with error -2 |
| [ 850.348376] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-21e6.hcd not found |
| [ 850.496313] e1000e: enp0s25 NIC Link is Down |
| [ 850.497961] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready |
| [ 850.757062] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready |
| [ 850.759567] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| [ 850.779019] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| [ 850.803455] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| [ 850.867927] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| [ 851.975692] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| [ 852.030729] wlp2s0: authenticate with e8:df:70:34:c3:00 |
| [ 852.045014] wlp2s0: send auth to e8:df:70:34:c3:00 (try 1/3) |
| [ 852.048338] wlp2s0: authenticated |
| [ 852.048663] wlp2s0: associate with e8:df:70:34:c3:00 (try 1/3) |
| [ 852.054868] wlp2s0: RX AssocResp from e8:df:70:34:c3:00 (capab=0x431 status=0 aid=5) |
| [ 852.055083] wlp2s0: associated |
| [ 852.061845] ath: EEPROM regdomain: 0x8028 |
| [ 852.061846] ath: EEPROM indicates we should expect a country code |
| [ 852.061848] ath: doing EEPROM country->regdmn map search |
| [ 852.061849] ath: country maps to regdmn code: 0x37 |
| [ 852.061850] ath: Country alpha2 being used: AT |
| [ 852.061851] ath: Regpair used: 0x37 |
| [ 852.061852] ath: regdomain 0x8028 dynamically updated by country element |
| [ 852.062747] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready |
| [ 1770.936693] atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0). |
| [ 1770.936703] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known. |
| [ 1770.936992] atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0). |
| [ 1770.937003] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known. |
| [ 1771.004261] wlp2s0: deauthenticating from e8:df:70:34:c3:00 by local choice (Reason: 3=DEAUTH_LEAVING) |
| [ 1771.044672] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| [ 1774.723493] PM: suspend entry (deep) |
| [ 1774.723499] PM: Syncing filesystems ... done. |
| [ 1774.757958] Freezing user space processes ... (elapsed 0.002 seconds) done. |
| [ 1774.760521] OOM killer disabled. |
| [ 1774.760523] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. |
| [ 1774.761812] printk: Suspending console(s) (use no_console_suspend to debug) |
| [ 1774.931866] sd 0:0:0:0: [sda] Synchronizing SCSI cache |
| [ 1774.935372] sd 0:0:0:0: [sda] Stopping disk |
| [ 1775.128241] e1000e: EEE TX LPI TIMER: 00000011 |
| [ 1775.224827] ACPI: EC: interrupt blocked |
| [ 1775.264308] ACPI: Preparing to enter system sleep state S3 |
| [ 1775.267199] ACPI: EC: event blocked |
| [ 1775.267200] ACPI: EC: EC stopped |
| [ 1775.267201] PM: Saving platform NVS memory |
| [ 1775.267202] Disabling non-boot CPUs ... |
| [ 1775.280240] irq_migrate_all_off_this_cpu: 4 callbacks suppressed |
| [ 1775.280242] IRQ 21: no longer affine to CPU1 |
| [ 1775.280248] IRQ 26: no longer affine to CPU1 |
| [ 1775.280253] IRQ 27: no longer affine to CPU1 |
| [ 1775.280259] IRQ 33: no longer affine to CPU1 |
| [ 1775.281272] smpboot: CPU 1 is now offline |
| [ 1775.300340] IRQ 30: no longer affine to CPU2 |
| [ 1775.301362] smpboot: CPU 2 is now offline |
| [ 1775.316079] IRQ 1: no longer affine to CPU3 |
| [ 1775.316085] IRQ 8: no longer affine to CPU3 |
| [ 1775.316089] IRQ 9: no longer affine to CPU3 |
| [ 1775.316092] IRQ 12: no longer affine to CPU3 |
| [ 1775.316097] IRQ 17: no longer affine to CPU3 |
| [ 1775.317130] smpboot: CPU 3 is now offline |
| [ 1775.319796] ACPI: Low-level resume complete |
| [ 1775.319833] ACPI: EC: EC started |
| [ 1775.319833] PM: Restoring platform NVS memory |
| [ 1775.320167] Enabling non-boot CPUs ... |
| [ 1775.320606] x86: Booting SMP configuration: |
| [ 1775.320606] smpboot: Booting Node 0 Processor 1 APIC 0x1 |
| [ 1775.323138] cache: parent cpu1 should not be sleeping |
| [ 1775.323633] CPU1 is up |
| [ 1775.324054] smpboot: Booting Node 0 Processor 2 APIC 0x2 |
| [ 1775.326518] cache: parent cpu2 should not be sleeping |
| [ 1775.326860] CPU2 is up |
| [ 1775.327308] smpboot: Booting Node 0 Processor 3 APIC 0x3 |
| [ 1775.329769] cache: parent cpu3 should not be sleeping |
| [ 1775.330139] CPU3 is up |
| [ 1775.333480] ACPI: Waking up from system sleep state S3 |
| [ 1775.335850] pci 0000:00:16.0: Refused to change power state, currently in D3 |
| [ 1775.335959] ACPI: EC: interrupt unblocked |
| [ 1775.374028] sdhci-pci 0000:01:00.0: MMC controller base frequency changed to 50Mhz. |
| [ 1775.375670] ACPI: EC: event unblocked |
| [ 1775.376964] ath: phy0: ASPM enabled: 0x43 |
| [ 1775.377461] sd 0:0:0:0: [sda] Starting disk |
| [ 1775.629409] usb 1-1.4: reset full-speed USB device number 3 using ehci-pci |
| [ 1775.691830] ata2: SATA link down (SStatus 0 SControl 300) |
| [ 1775.691863] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [ 1775.691919] ata3: SATA link down (SStatus 0 SControl 300) |
| [ 1775.698028] ata1.00: supports DRM functions and may not be fully accessible |
| [ 1775.765669] ata1.00: supports DRM functions and may not be fully accessible |
| [ 1775.817442] usb 1-1.5: reset full-speed USB device number 4 using ehci-pci |
| [ 1775.819698] ata1.00: configured for UDMA/133 |
| [ 1775.832764] ata1.00: Enabling discard_zeroes_data |
| [ 1776.005408] usb 1-1.6: reset high-speed USB device number 5 using ehci-pci |
| [ 1776.081429] psmouse serio1: synaptics: queried max coordinates: x [..5768], y [..5062] |
| [ 1776.112749] psmouse serio1: synaptics: queried min coordinates: x [1174..], y [790..] |
| [ 1776.219218] OOM killer enabled. |
| [ 1776.219222] Restarting tasks ... done. |
| [ 1776.276594] video LNXVIDEO:00: Restoring backlight state |
| [ 1776.325421] PM: suspend exit |
| [ 1776.347329] Bluetooth: hci0: BCM: chip id 63 |
| [ 1776.348423] Bluetooth: hci0: BCM: features 0x07 |
| [ 1776.364364] Bluetooth: hci0: BCM20702A |
| [ 1776.365389] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000 |
| [ 1776.365406] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-21e6.hcd failed with error -2 |
| [ 1776.365410] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-21e6.hcd not found |
| [ 1776.485054] e1000e: enp0s25 NIC Link is Down |
| [ 1776.486677] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready |
| [ 1776.745693] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready |
| [ 1776.748490] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| [ 1776.768017] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| [ 1776.792436] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| [ 1776.854838] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| [ 1777.964859] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| [ 1778.012583] wlp2s0: authenticate with e8:df:70:34:c3:00 |
| [ 1778.026888] wlp2s0: send auth to e8:df:70:34:c3:00 (try 1/3) |
| [ 1778.030361] wlp2s0: authenticated |
| [ 1778.033337] wlp2s0: associate with e8:df:70:34:c3:00 (try 1/3) |
| [ 1778.038644] wlp2s0: RX AssocResp from e8:df:70:34:c3:00 (capab=0x431 status=0 aid=5) |
| [ 1778.038849] wlp2s0: associated |
| [ 1778.046441] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready |
| [ 1778.047423] ath: EEPROM regdomain: 0x8028 |
| [ 1778.047425] ath: EEPROM indicates we should expect a country code |
| [ 1778.047426] ath: doing EEPROM country->regdmn map search |
| [ 1778.047428] ath: country maps to regdmn code: 0x37 |
| [ 1778.047429] ath: Country alpha2 being used: AT |
| [ 1778.047430] ath: Regpair used: 0x37 |
| [ 1778.047432] ath: regdomain 0x8028 dynamically updated by country element |
| [ 3487.005210] perf: interrupt took too long (2523 > 2500), lowering kernel.perf_event_max_sample_rate to 79250 |
| [ 5676.395538] perf: interrupt took too long (3178 > 3153), lowering kernel.perf_event_max_sample_rate to 62750 |
| [ 5856.910900] atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0). |
| [ 5856.910910] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known. |
| [ 5856.911191] atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0). |
| [ 5856.911200] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known. |
| [ 5856.991511] wlp2s0: deauthenticating from e8:df:70:34:c3:00 by local choice (Reason: 3=DEAUTH_LEAVING) |
| [ 5857.244626] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| [ 5860.720243] PM: suspend entry (deep) |
| [ 5860.720248] PM: Syncing filesystems ... done. |
| [ 5860.738116] Freezing user space processes ... (elapsed 0.002 seconds) done. |
| [ 5860.740322] OOM killer disabled. |
| [ 5860.740324] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. |
| [ 5860.741715] printk: Suspending console(s) (use no_console_suspend to debug) |
| [ 5860.909542] sd 0:0:0:0: [sda] Synchronizing SCSI cache |
| [ 5860.913790] sd 0:0:0:0: [sda] Stopping disk |
| [ 5861.105086] e1000e: EEE TX LPI TIMER: 00000011 |
| [ 5861.198354] ACPI: EC: interrupt blocked |
| [ 5861.237970] ACPI: Preparing to enter system sleep state S3 |
| [ 5861.240914] ACPI: EC: event blocked |
| [ 5861.240915] ACPI: EC: EC stopped |
| [ 5861.240916] PM: Saving platform NVS memory |
| [ 5861.240917] Disabling non-boot CPUs ... |
| [ 5861.253948] irq_migrate_all_off_this_cpu: 4 callbacks suppressed |
| [ 5861.253951] IRQ 21: no longer affine to CPU1 |
| [ 5861.253957] IRQ 26: no longer affine to CPU1 |
| [ 5861.253962] IRQ 27: no longer affine to CPU1 |
| [ 5861.253968] IRQ 33: no longer affine to CPU1 |
| [ 5861.254981] smpboot: CPU 1 is now offline |
| [ 5861.274027] IRQ 30: no longer affine to CPU2 |
| [ 5861.275049] smpboot: CPU 2 is now offline |
| [ 5861.289762] IRQ 1: no longer affine to CPU3 |
| [ 5861.289767] IRQ 8: no longer affine to CPU3 |
| [ 5861.289771] IRQ 9: no longer affine to CPU3 |
| [ 5861.289775] IRQ 12: no longer affine to CPU3 |
| [ 5861.289780] IRQ 17: no longer affine to CPU3 |
| [ 5861.290814] smpboot: CPU 3 is now offline |
| [ 5861.293289] ACPI: Low-level resume complete |
| [ 5861.293325] ACPI: EC: EC started |
| [ 5861.293325] PM: Restoring platform NVS memory |
| [ 5861.293654] Enabling non-boot CPUs ... |
| [ 5861.294010] x86: Booting SMP configuration: |
| [ 5861.294011] smpboot: Booting Node 0 Processor 1 APIC 0x1 |
| [ 5861.296543] cache: parent cpu1 should not be sleeping |
| [ 5861.297043] CPU1 is up |
| [ 5861.297387] smpboot: Booting Node 0 Processor 2 APIC 0x2 |
| [ 5861.299853] cache: parent cpu2 should not be sleeping |
| [ 5861.300198] CPU2 is up |
| [ 5861.300570] smpboot: Booting Node 0 Processor 3 APIC 0x3 |
| [ 5861.303030] cache: parent cpu3 should not be sleeping |
| [ 5861.303406] CPU3 is up |
| [ 5861.306739] ACPI: Waking up from system sleep state S3 |
| [ 5861.309094] pci 0000:00:16.0: Refused to change power state, currently in D3 |
| [ 5861.309253] ACPI: EC: interrupt unblocked |
| [ 5861.347672] sdhci-pci 0000:01:00.0: MMC controller base frequency changed to 50Mhz. |
| [ 5861.349253] ACPI: EC: event unblocked |
| [ 5861.350537] ath: phy0: ASPM enabled: 0x43 |
| [ 5861.350814] sd 0:0:0:0: [sda] Starting disk |
| [ 5861.603080] usb 1-1.4: reset full-speed USB device number 3 using ehci-pci |
| [ 5861.661517] ata3: SATA link down (SStatus 0 SControl 300) |
| [ 5861.661550] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [ 5861.665481] ata2: SATA link down (SStatus 0 SControl 300) |
| [ 5861.665523] ata1.00: supports DRM functions and may not be fully accessible |
| [ 5861.734199] ata1.00: supports DRM functions and may not be fully accessible |
| [ 5861.787447] ata1.00: configured for UDMA/133 |
| [ 5861.791122] usb 1-1.6: reset high-speed USB device number 5 using ehci-pci |
| [ 5861.801345] ata1.00: Enabling discard_zeroes_data |
| [ 5861.983112] usb 1-1.5: reset full-speed USB device number 4 using ehci-pci |
| [ 5862.052295] psmouse serio1: synaptics: queried max coordinates: x [..5768], y [..5062] |
| [ 5862.083715] psmouse serio1: synaptics: queried min coordinates: x [1174..], y [790..] |
| [ 5862.190467] OOM killer enabled. |
| [ 5862.190471] Restarting tasks ... done. |
| [ 5862.216094] video LNXVIDEO:00: Restoring backlight state |
| [ 5862.263241] PM: suspend exit |
| [ 5862.316897] Bluetooth: hci0: BCM: chip id 63 |
| [ 5862.317884] Bluetooth: hci0: BCM: features 0x07 |
| [ 5862.333879] Bluetooth: hci0: BCM20702A |
| [ 5862.334874] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000 |
| [ 5862.348337] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-21e6.hcd failed with error -2 |
| [ 5862.348344] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-21e6.hcd not found |
| [ 5862.666680] e1000e: enp0s25 NIC Link is Down |
| [ 5862.672648] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready |
| [ 5862.931280] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready |
| [ 5862.936654] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| [ 5862.956145] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| [ 5862.980779] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| [ 5863.043945] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| [ 5864.195000] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| [ 5864.258608] wlp2s0: authenticate with e8:df:70:34:c3:00 |
| [ 5864.272976] wlp2s0: send auth to e8:df:70:34:c3:00 (try 1/3) |
| [ 5864.276521] wlp2s0: authenticated |
| [ 5864.279117] wlp2s0: associate with e8:df:70:34:c3:00 (try 1/3) |
| [ 5864.288115] wlp2s0: RX AssocResp from e8:df:70:34:c3:00 (capab=0x431 status=0 aid=3) |
| [ 5864.288331] wlp2s0: associated |
| [ 5864.295892] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready |
| [ 5864.298860] ath: EEPROM regdomain: 0x8028 |
| [ 5864.298862] ath: EEPROM indicates we should expect a country code |
| [ 5864.298863] ath: doing EEPROM country->regdmn map search |
| [ 5864.298865] ath: country maps to regdmn code: 0x37 |
| [ 5864.298866] ath: Country alpha2 being used: AT |
| [ 5864.298868] ath: Regpair used: 0x37 |
| [ 5864.298870] ath: regdomain 0x8028 dynamically updated by country element |
| [ 8667.367290] perf: interrupt took too long (3973 > 3972), lowering kernel.perf_event_max_sample_rate to 50250 |
| [ 9812.266554] atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0). |
| [ 9812.266564] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known. |
| [ 9812.266846] atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0). |
| [ 9812.266858] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known. |
| [ 9812.323275] wlp2s0: deauthenticating from e8:df:70:34:c3:00 by local choice (Reason: 3=DEAUTH_LEAVING) |
| [ 9812.557635] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| [ 9815.676649] PM: suspend entry (deep) |
| [ 9815.676653] PM: Syncing filesystems ... done. |
| [ 9815.686483] Freezing user space processes ... (elapsed 0.002 seconds) done. |
| [ 9815.688580] OOM killer disabled. |
| [ 9815.688582] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. |
| [ 9815.689962] printk: Suspending console(s) (use no_console_suspend to debug) |
| [ 9815.833089] sd 0:0:0:0: [sda] Synchronizing SCSI cache |
| [ 9815.836568] sd 0:0:0:0: [sda] Stopping disk |
| [ 9816.030475] e1000e: EEE TX LPI TIMER: 00000011 |
| [ 9816.125304] ACPI: EC: interrupt blocked |
| [ 9816.165525] ACPI: Preparing to enter system sleep state S3 |
| [ 9816.168831] ACPI: EC: event blocked |
| [ 9816.168832] ACPI: EC: EC stopped |
| [ 9816.168833] PM: Saving platform NVS memory |
| [ 9816.168834] Disabling non-boot CPUs ... |
| [ 9816.181484] irq_migrate_all_off_this_cpu: 4 callbacks suppressed |
| [ 9816.181487] IRQ 21: no longer affine to CPU1 |
| [ 9816.181493] IRQ 26: no longer affine to CPU1 |
| [ 9816.181497] IRQ 27: no longer affine to CPU1 |
| [ 9816.181503] IRQ 33: no longer affine to CPU1 |
| [ 9816.182516] smpboot: CPU 1 is now offline |
| [ 9816.201570] IRQ 30: no longer affine to CPU2 |
| [ 9816.202591] smpboot: CPU 2 is now offline |
| [ 9816.217308] IRQ 1: no longer affine to CPU3 |
| [ 9816.217314] IRQ 8: no longer affine to CPU3 |
| [ 9816.217317] IRQ 9: no longer affine to CPU3 |
| [ 9816.217321] IRQ 12: no longer affine to CPU3 |
| [ 9816.217325] IRQ 17: no longer affine to CPU3 |
| [ 9816.218360] smpboot: CPU 3 is now offline |
| [ 9816.220933] ACPI: Low-level resume complete |
| [ 9816.220968] ACPI: EC: EC started |
| [ 9816.220969] PM: Restoring platform NVS memory |
| [ 9816.221327] Enabling non-boot CPUs ... |
| [ 9816.221687] x86: Booting SMP configuration: |
| [ 9816.221688] smpboot: Booting Node 0 Processor 1 APIC 0x1 |
| [ 9816.224223] cache: parent cpu1 should not be sleeping |
| [ 9816.224725] CPU1 is up |
| [ 9816.225072] smpboot: Booting Node 0 Processor 2 APIC 0x2 |
| [ 9816.227547] cache: parent cpu2 should not be sleeping |
| [ 9816.227895] CPU2 is up |
| [ 9816.228269] smpboot: Booting Node 0 Processor 3 APIC 0x3 |
| [ 9816.230733] cache: parent cpu3 should not be sleeping |
| [ 9816.231104] CPU3 is up |
| [ 9816.234450] ACPI: Waking up from system sleep state S3 |
| [ 9816.236687] pci 0000:00:16.0: Refused to change power state, currently in D3 |
| [ 9816.236791] ACPI: EC: interrupt unblocked |
| [ 9816.275222] sdhci-pci 0000:01:00.0: MMC controller base frequency changed to 50Mhz. |
| [ 9816.276883] ACPI: EC: event unblocked |
| [ 9816.278137] ath: phy0: ASPM enabled: 0x43 |
| [ 9816.278149] sd 0:0:0:0: [sda] Starting disk |
| [ 9816.530639] usb 1-1.4: reset full-speed USB device number 3 using ehci-pci |
| [ 9816.589011] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [ 9816.589064] ata3: SATA link down (SStatus 0 SControl 300) |
| [ 9816.590498] ata1.00: supports DRM functions and may not be fully accessible |
| [ 9816.593001] ata2: SATA link down (SStatus 0 SControl 300) |
| [ 9816.658692] ata1.00: supports DRM functions and may not be fully accessible |
| [ 9816.712271] ata1.00: configured for UDMA/133 |
| [ 9816.718622] usb 1-1.6: reset high-speed USB device number 5 using ehci-pci |
| [ 9816.726327] ata1.00: Enabling discard_zeroes_data |
| [ 9816.910611] usb 1-1.5: reset full-speed USB device number 4 using ehci-pci |
| [ 9816.987944] psmouse serio1: synaptics: queried max coordinates: x [..5768], y [..5062] |
| [ 9817.019508] psmouse serio1: synaptics: queried min coordinates: x [1174..], y [790..] |
| [ 9817.127212] OOM killer enabled. |
| [ 9817.127216] Restarting tasks ... done. |
| [ 9817.160463] video LNXVIDEO:00: Restoring backlight state |
| [ 9817.170615] PM: suspend exit |
| [ 9817.248561] Bluetooth: hci0: BCM: chip id 63 |
| [ 9817.249654] Bluetooth: hci0: BCM: features 0x07 |
| [ 9817.266396] Bluetooth: hci0: BCM20702A |
| [ 9817.267408] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000 |
| [ 9817.267440] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-21e6.hcd failed with error -2 |
| [ 9817.267443] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-21e6.hcd not found |
| [ 9817.426207] e1000e: enp0s25 NIC Link is Down |
| [ 9817.428249] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready |
| [ 9817.690984] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready |
| [ 9817.693227] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| [ 9817.712230] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| [ 9817.736494] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| [ 9817.805048] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| [ 9818.914519] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| [ 9818.967952] wlp2s0: authenticate with e8:df:70:34:c3:00 |
| [ 9818.982282] wlp2s0: send auth to e8:df:70:34:c3:00 (try 1/3) |
| [ 9818.986493] wlp2s0: authenticated |
| [ 9818.990562] wlp2s0: associate with e8:df:70:34:c3:00 (try 1/3) |
| [ 9818.998217] wlp2s0: RX AssocResp from e8:df:70:34:c3:00 (capab=0x431 status=0 aid=5) |
| [ 9818.998439] wlp2s0: associated |
| [ 9819.006208] ath: EEPROM regdomain: 0x8028 |
| [ 9819.006210] ath: EEPROM indicates we should expect a country code |
| [ 9819.006211] ath: doing EEPROM country->regdmn map search |
| [ 9819.006212] ath: country maps to regdmn code: 0x37 |
| [ 9819.006213] ath: Country alpha2 being used: AT |
| [ 9819.006214] ath: Regpair used: 0x37 |
| [ 9819.006215] ath: regdomain 0x8028 dynamically updated by country element |
| [ 9819.008089] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready |
| [10242.120302] atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0). |
| [10242.120311] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known. |
| [10242.120635] atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0). |
| [10242.120643] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known. |
| [10242.165224] wlp2s0: deauthenticating from e8:df:70:34:c3:00 by local choice (Reason: 3=DEAUTH_LEAVING) |
| [10242.203135] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| [10245.663993] PM: suspend entry (deep) |
| [10245.663999] PM: Syncing filesystems ... done. |
| [10245.673045] Freezing user space processes ... (elapsed 0.001 seconds) done. |
| [10245.675014] OOM killer disabled. |
| [10245.675015] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. |
| [10245.676470] printk: Suspending console(s) (use no_console_suspend to debug) |
| [10245.824568] sd 0:0:0:0: [sda] Synchronizing SCSI cache |
| [10245.828068] sd 0:0:0:0: [sda] Stopping disk |
| [10246.014944] e1000e: EEE TX LPI TIMER: 00000011 |
| [10246.108819] ACPI: EC: interrupt blocked |
| [10246.148912] ACPI: Preparing to enter system sleep state S3 |
| [10246.151895] ACPI: EC: event blocked |
| [10246.151896] ACPI: EC: EC stopped |
| [10246.151897] PM: Saving platform NVS memory |
| [10246.151898] Disabling non-boot CPUs ... |
| [10246.164960] irq_migrate_all_off_this_cpu: 4 callbacks suppressed |
| [10246.164963] IRQ 21: no longer affine to CPU1 |
| [10246.164970] IRQ 26: no longer affine to CPU1 |
| [10246.164974] IRQ 27: no longer affine to CPU1 |
| [10246.164980] IRQ 33: no longer affine to CPU1 |
| [10246.165993] smpboot: CPU 1 is now offline |
| [10246.181047] IRQ 30: no longer affine to CPU2 |
| [10246.182074] smpboot: CPU 2 is now offline |
| [10246.196780] IRQ 1: no longer affine to CPU3 |
| [10246.196786] IRQ 8: no longer affine to CPU3 |
| [10246.196789] IRQ 9: no longer affine to CPU3 |
| [10246.196794] IRQ 12: no longer affine to CPU3 |
| [10246.196798] IRQ 17: no longer affine to CPU3 |
| [10246.197834] smpboot: CPU 3 is now offline |
| [10246.200366] ACPI: Low-level resume complete |
| [10246.200402] ACPI: EC: EC started |
| [10246.200403] PM: Restoring platform NVS memory |
| [10246.200725] Enabling non-boot CPUs ... |
| [10246.201105] x86: Booting SMP configuration: |
| [10246.201106] smpboot: Booting Node 0 Processor 1 APIC 0x1 |
| [10246.203639] cache: parent cpu1 should not be sleeping |
| [10246.204142] CPU1 is up |
| [10246.204505] smpboot: Booting Node 0 Processor 2 APIC 0x2 |
| [10246.206970] cache: parent cpu2 should not be sleeping |
| [10246.207334] CPU2 is up |
| [10246.207723] smpboot: Booting Node 0 Processor 3 APIC 0x3 |
| [10246.210197] cache: parent cpu3 should not be sleeping |
| [10246.210579] CPU3 is up |
| [10246.213924] ACPI: Waking up from system sleep state S3 |
| [10246.216286] pci 0000:00:16.0: Refused to change power state, currently in D3 |
| [10246.216391] ACPI: EC: interrupt unblocked |
| [10246.258237] sdhci-pci 0000:01:00.0: MMC controller base frequency changed to 50Mhz. |
| [10246.260009] ACPI: EC: event unblocked |
| [10246.261446] ath: phy0: ASPM enabled: 0x43 |
| [10246.269002] sd 0:0:0:0: [sda] Starting disk |
| [10246.514059] usb 1-1.5: reset full-speed USB device number 4 using ehci-pci |
| [10246.576544] ata3: SATA link down (SStatus 0 SControl 300) |
| [10246.576579] ata2: SATA link down (SStatus 0 SControl 300) |
| [10246.576611] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [10246.581499] ata1.00: supports DRM functions and may not be fully accessible |
| [10246.649900] ata1.00: supports DRM functions and may not be fully accessible |
| [10246.702127] usb 1-1.4: reset full-speed USB device number 3 using ehci-pci |
| [10246.704081] ata1.00: configured for UDMA/133 |
| [10246.717136] ata1.00: Enabling discard_zeroes_data |
| [10246.890092] usb 1-1.6: reset high-speed USB device number 5 using ehci-pci |
| [10246.966984] psmouse serio1: synaptics: queried max coordinates: x [..5768], y [..5062] |
| [10246.998114] psmouse serio1: synaptics: queried min coordinates: x [1174..], y [790..] |
| [10247.104347] OOM killer enabled. |
| [10247.104351] Restarting tasks ... done. |
| [10247.127996] video LNXVIDEO:00: Restoring backlight state |
| [10247.190120] PM: suspend exit |
| [10247.227687] Bluetooth: hci0: BCM: chip id 63 |
| [10247.228693] Bluetooth: hci0: BCM: features 0x07 |
| [10247.244686] Bluetooth: hci0: BCM20702A |
| [10247.245681] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000 |
| [10247.245695] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-21e6.hcd failed with error -2 |
| [10247.245699] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-21e6.hcd not found |
| [10247.357597] e1000e: enp0s25 NIC Link is Down |
| [10247.359181] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready |
| [10247.618403] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready |
| [10247.620690] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| [10247.639608] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| [10247.663894] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| [10247.734476] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| [10248.858395] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| [10248.930494] wlp2s0: authenticate with e8:df:70:34:c3:00 |
| [10248.944838] wlp2s0: send auth to e8:df:70:34:c3:00 (try 1/3) |
| [10248.948643] wlp2s0: authenticated |
| [10248.950003] wlp2s0: associate with e8:df:70:34:c3:00 (try 1/3) |
| [10248.956439] wlp2s0: RX AssocResp from e8:df:70:34:c3:00 (capab=0x431 status=0 aid=5) |
| [10248.956669] wlp2s0: associated |
| [10248.961978] ath: EEPROM regdomain: 0x8028 |
| [10248.961980] ath: EEPROM indicates we should expect a country code |
| [10248.961981] ath: doing EEPROM country->regdmn map search |
| [10248.961981] ath: country maps to regdmn code: 0x37 |
| [10248.961982] ath: Country alpha2 being used: AT |
| [10248.961983] ath: Regpair used: 0x37 |
| [10248.961984] ath: regdomain 0x8028 dynamically updated by country element |
| [10248.966114] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready |
| [11943.347632] perf: interrupt took too long (5005 > 4966), lowering kernel.perf_event_max_sample_rate to 39750 |
| [15768.315752] perf: interrupt took too long (6315 > 6256), lowering kernel.perf_event_max_sample_rate to 31500 |
| [26981.357015] wlp2s0: authenticate with e8:df:70:34:c3:00 |
| [26981.375347] wlp2s0: send auth to e8:df:70:34:c3:00 (try 1/3) |
| [26981.737829] wlp2s0: authenticated |
| [26981.741720] wlp2s0: associate with e8:df:70:34:c3:00 (try 1/3) |
| [26981.747101] wlp2s0: RX AssocResp from e8:df:70:34:c3:00 (capab=0x431 status=0 aid=5) |
| [26981.747326] wlp2s0: associated |
| [26981.756244] ath: EEPROM regdomain: 0x8028 |
| [26981.756246] ath: EEPROM indicates we should expect a country code |
| [26981.756247] ath: doing EEPROM country->regdmn map search |
| [26981.756248] ath: country maps to regdmn code: 0x37 |
| [26981.756249] ath: Country alpha2 being used: AT |
| [26981.756249] ath: Regpair used: 0x37 |
| [26981.756251] ath: regdomain 0x8028 dynamically updated by country element |
| [27242.729823] usb 1-1.2: new high-speed USB device number 6 using ehci-pci |
| [27242.840198] usb 1-1.2: New USB device found, idVendor=090c, idProduct=1000, bcdDevice=11.00 |
| [27242.840208] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [27242.840213] usb 1-1.2: Product: USB DISK |
| [27242.840217] usb 1-1.2: Manufacturer: SMI Corporation |
| [27242.913050] usb-storage 1-1.2:1.0: USB Mass Storage device detected |
| [27242.913260] scsi host6: usb-storage 1-1.2:1.0 |
| [27242.913395] usbcore: registered new interface driver usb-storage |
| [27242.914800] usbcore: registered new interface driver uas |
| [27244.066153] scsi 6:0:0:0: Direct-Access SMI USB DISK 1100 PQ: 0 ANSI: 4 |
| [27244.067333] sd 6:0:0:0: Attached scsi generic sg1 type 0 |
| [27244.070307] sd 6:0:0:0: [sdb] 15974400 512-byte logical blocks: (8.18 GB/7.62 GiB) |
| [27244.071168] sd 6:0:0:0: [sdb] Write Protect is off |
| [27244.071176] sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00 |
| [27244.072050] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [27244.079350] sdb: sdb1 |
| [27244.084414] sd 6:0:0:0: [sdb] Attached SCSI removable disk |
| [27244.376916] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. |
| [27390.730924] usb 1-1.2: USB disconnect, device number 6 |
| [36749.300236] fe[23464]: segfault at 7fa0c66ada69 ip 00007fa10e77f000 sp 00007ffca50146a8 error 6 |
| [36749.300251] Code: Bad RIP value. |
| [36749.300562] fe[23465]: segfault at 0 ip 00007fa10e77f005 sp 00007ffca50146a8 error 4 |
| [36749.300573] Code: Bad RIP value. |
| [36749.300879] fe[23466]: segfault at 0 ip 00007fa10e77f00a sp 00007ffca50146a8 error 6 |
| [36749.300890] Code: Bad RIP value. |
| [36749.301198] fe[23467]: segfault at 0 ip 00007fa10e77f014 sp 00007ffca50146a8 error 6 |
| [36749.301209] Code: Bad RIP value. |
| [36749.301510] fe[23468]: segfault at 7fa10e279394 ip 00007fa10e77f004 sp 00007ffca50146a8 error 7 |
| [36749.301521] Code: Bad RIP value. |
| [36749.301841] traps: fe[23469] general protection fault ip:7fa10e77f004 sp:7ffca500bb88 error:0 |
| [36749.302041] fe[23470]: segfault at ffffffffffffffa6 ip 00007fa10e77f007 sp 00007ffca50146a8 error 5 |
| [36749.302050] Code: Bad RIP value. |
| [36749.302217] fe[23471]: segfault at 0 ip 0000000000000000 sp 00007ffca501ebdd error 14 in fe[55f6dfe99000+1000] |
| [36749.302225] Code: Bad RIP value. |
| [36749.302385] traps: fe[23472] general protection fault ip:7fa10e77f002 sp:7ffca50146a8 error:dfe8 |
| [36749.302537] fe[23473]: segfault at 7fa10e279400 ip 00007fa10e77f000 sp 00007ffca50146a8 error 7 |
| [36749.302544] Code: Bad RIP value. |
| [36821.299999] show_signal_msg: 843 callbacks suppressed |
| [36821.300004] fe[24359]: segfault at 0 ip 00007f5e39f7700a sp 00007fffa6514d48 error 6 |
| [36821.300019] Code: Bad RIP value. |
| [36821.300333] fe[24360]: segfault at b8425b73 ip 00007f5e39f77026 sp 00007fffa6514d48 error 6 |
| [36821.300344] Code: Bad RIP value. |
| [36821.300658] traps: fe[24361] trap invalid opcode ip:7f5e39f77000 sp:7fffa6514d48 error:0 |
| [36821.300967] fe[24362]: segfault at d ip 00007f5e39f77000 sp 00007fffa6514d48 error 4 |
| [36821.300978] Code: Bad RIP value. |
| [36821.301289] traps: fe[24363] trap invalid opcode ip:7f5e39f77005 sp:7fffa6514d48 error:0 |
| [36821.301600] fe[24364]: segfault at 600 ip 00007f5e39f77001 sp 00007fffa6514d48 error 4 |
| [36821.301611] Code: Bad RIP value. |
| [36821.301920] fe[24365]: segfault at ffffffffffffffca ip 00007f5e39f77000 sp 00007fffa6514d48 error 7 |
| [36821.301931] Code: Bad RIP value. |
| [36821.302236] fe[24366]: segfault at 7f5e39f76fa9 ip 00007f5e39f77000 sp 00007fffa6514d48 error 4 |
| [36821.302246] Code: Bad RIP value. |
| [36821.302505] traps: fe[24367] general protection fault ip:7f5e39f77008 sp:7fffa6514d48 error:6ea |
| [36821.302721] fe[24368]: segfault at 7f5e7194b982 ip 00007f5e39f77000 sp 00007fffa6514d48 error 6 |
| [36821.302738] Code: Bad RIP value. |
| [41619.600217] usb 1-1.2: new high-speed USB device number 7 using ehci-pci |
| [41619.711167] usb 1-1.2: New USB device found, idVendor=1e68, idProduct=0035, bcdDevice= 0.35 |
| [41619.711176] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [41619.711180] usb 1-1.2: Product: TrekStor USB-Stick CS |
| [41619.711184] usb 1-1.2: Manufacturer: TrekStor USB-Stick CS |
| [41619.711188] usb 1-1.2: SerialNumber: AA000000000948 |
| [41619.711900] usb-storage 1-1.2:1.0: USB Mass Storage device detected |
| [41619.713056] scsi host6: usb-storage 1-1.2:1.0 |
| [41621.126733] scsi 6:0:0:0: Direct-Access TrekStor TrekStor USB CS PQ: 0 ANSI: 0 CCS |
| [41621.127960] sd 6:0:0:0: Attached scsi generic sg1 type 0 |
| [41621.128619] sd 6:0:0:0: [sdb] 15257600 512-byte logical blocks: (7.81 GB/7.28 GiB) |
| [41621.129478] sd 6:0:0:0: [sdb] Write Protect is off |
| [41621.129487] sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00 |
| [41621.130353] sd 6:0:0:0: [sdb] No Caching mode page found |
| [41621.130361] sd 6:0:0:0: [sdb] Assuming drive cache: write through |
| [41621.134463] sdb: sdb1 |
| [41621.137223] sd 6:0:0:0: [sdb] Attached SCSI removable disk |
| [41972.040428] usb 1-1.2: USB disconnect, device number 7 |
| [45356.174863] atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0). |
| [45356.174874] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known. |
| [45356.175174] atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0). |
| [45356.175186] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known. |
| [45356.291945] wlp2s0: deauthenticating from e8:df:70:34:c3:00 by local choice (Reason: 3=DEAUTH_LEAVING) |
| [45356.355990] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| [45359.617789] PM: suspend entry (deep) |
| [45359.617794] PM: Syncing filesystems ... done. |
| [45359.631511] Freezing user space processes ... (elapsed 0.002 seconds) done. |
| [45359.633556] OOM killer disabled. |
| [45359.633558] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. |
| [45359.634763] printk: Suspending console(s) (use no_console_suspend to debug) |
| [45359.802029] sd 0:0:0:0: [sda] Synchronizing SCSI cache |
| [45359.805603] sd 0:0:0:0: [sda] Stopping disk |
| [45360.004546] e1000e: EEE TX LPI TIMER: 00000011 |
| [45360.098591] ACPI: EC: interrupt blocked |
| [45360.138522] ACPI: Preparing to enter system sleep state S3 |
| [45360.141544] ACPI: EC: event blocked |
| [45360.141544] ACPI: EC: EC stopped |
| [45360.141545] PM: Saving platform NVS memory |
| [45360.141546] Disabling non-boot CPUs ... |
| [45360.154541] irq_migrate_all_off_this_cpu: 4 callbacks suppressed |
| [45360.154544] IRQ 21: no longer affine to CPU1 |
| [45360.154550] IRQ 26: no longer affine to CPU1 |
| [45360.154555] IRQ 27: no longer affine to CPU1 |
| [45360.154561] IRQ 33: no longer affine to CPU1 |
| [45360.156123] smpboot: CPU 1 is now offline |
| [45360.170619] IRQ 30: no longer affine to CPU2 |
| [45360.172245] smpboot: CPU 2 is now offline |
| [45360.186371] IRQ 1: no longer affine to CPU3 |
| [45360.186376] IRQ 8: no longer affine to CPU3 |
| [45360.186379] IRQ 9: no longer affine to CPU3 |
| [45360.186383] IRQ 12: no longer affine to CPU3 |
| [45360.186388] IRQ 17: no longer affine to CPU3 |
| [45360.187412] smpboot: CPU 3 is now offline |
| [45360.189987] ACPI: Low-level resume complete |
| [45360.190022] ACPI: EC: EC started |
| [45360.190022] PM: Restoring platform NVS memory |
| [45360.190358] Enabling non-boot CPUs ... |
| [45360.190747] x86: Booting SMP configuration: |
| [45360.190747] smpboot: Booting Node 0 Processor 1 APIC 0x1 |
| [45360.193283] cache: parent cpu1 should not be sleeping |
| [45360.193787] CPU1 is up |
| [45360.194163] smpboot: Booting Node 0 Processor 2 APIC 0x2 |
| [45360.196629] cache: parent cpu2 should not be sleeping |
| [45360.196983] CPU2 is up |
| [45360.197385] smpboot: Booting Node 0 Processor 3 APIC 0x3 |
| [45360.199847] cache: parent cpu3 should not be sleeping |
| [45360.200236] CPU3 is up |
| [45360.203581] ACPI: Waking up from system sleep state S3 |
| [45360.205921] pci_raw_set_power_state: 5697 callbacks suppressed |
| [45360.205924] pci 0000:00:16.0: Refused to change power state, currently in D3 |
| [45360.206021] ACPI: EC: interrupt unblocked |
| [45360.244258] sdhci-pci 0000:01:00.0: MMC controller base frequency changed to 50Mhz. |
| [45360.246150] ACPI: EC: event unblocked |
| [45360.247396] ath: phy0: ASPM enabled: 0x43 |
| [45360.247870] sd 0:0:0:0: [sda] Starting disk |
| [45360.503679] usb 1-1.5: reset full-speed USB device number 4 using ehci-pci |
| [45360.562027] ata3: SATA link down (SStatus 0 SControl 300) |
| [45360.562078] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [45360.562150] ata2: SATA link down (SStatus 0 SControl 300) |
| [45360.563074] ata1.00: supports DRM functions and may not be fully accessible |
| [45360.631499] ata1.00: supports DRM functions and may not be fully accessible |
| [45360.685290] ata1.00: configured for UDMA/133 |
| [45360.691651] usb 1-1.6: reset high-speed USB device number 5 using ehci-pci |
| [45360.698839] ata1.00: Enabling discard_zeroes_data |
| [45360.883692] usb 1-1.4: reset full-speed USB device number 3 using ehci-pci |
| [45360.951757] psmouse serio1: synaptics: queried max coordinates: x [..5768], y [..5062] |
| [45360.983025] psmouse serio1: synaptics: queried min coordinates: x [1174..], y [790..] |
| [45361.088899] OOM killer enabled. |
| [45361.088902] Restarting tasks ... done. |
| [45361.116760] video LNXVIDEO:00: Restoring backlight state |
| [45361.163847] PM: suspend exit |
| [45361.213817] Bluetooth: hci0: BCM: chip id 63 |
| [45361.214817] Bluetooth: hci0: BCM: features 0x07 |
| [45361.230818] Bluetooth: hci0: BCM20702A |
| [45361.234814] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000 |
| [45361.243696] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-21e6.hcd failed with error -2 |
| [45361.243701] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-21e6.hcd not found |
| [45361.427220] e1000e: enp0s25 NIC Link is Down |
| [45361.437487] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready |
| [45361.695925] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready |
| [45361.697909] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| [45361.716921] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| [45361.741458] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| [45361.810672] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| [45362.925320] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| [45362.968603] wlp2s0: authenticate with e8:df:70:34:c3:00 |
| [45362.983023] wlp2s0: send auth to e8:df:70:34:c3:00 (try 1/3) |
| [45362.989523] wlp2s0: authenticated |
| [45362.995618] wlp2s0: associate with e8:df:70:34:c3:00 (try 1/3) |
| [45363.001721] wlp2s0: RX AssocResp from e8:df:70:34:c3:00 (capab=0x431 status=0 aid=5) |
| [45363.001964] wlp2s0: associated |
| [45363.008209] ath: EEPROM regdomain: 0x8028 |
| [45363.008211] ath: EEPROM indicates we should expect a country code |
| [45363.008212] ath: doing EEPROM country->regdmn map search |
| [45363.008212] ath: country maps to regdmn code: 0x37 |
| [45363.008214] ath: Country alpha2 being used: AT |
| [45363.008215] ath: Regpair used: 0x37 |
| [45363.008216] ath: regdomain 0x8028 dynamically updated by country element |
| [45363.026760] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready |
| [45594.138578] atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0). |
| [45594.138593] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known. |
| [45594.139012] atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0). |
| [45594.139021] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known. |
| [45594.197062] wlp2s0: deauthenticating from e8:df:70:34:c3:00 by local choice (Reason: 3=DEAUTH_LEAVING) |
| [45594.233948] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| [45597.602703] PM: suspend entry (deep) |
| [45597.602710] PM: Syncing filesystems ... done. |
| [45597.616625] Freezing user space processes ... (elapsed 0.002 seconds) done. |
| [45597.618843] OOM killer disabled. |
| [45597.618845] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. |
| [45597.620186] printk: Suspending console(s) (use no_console_suspend to debug) |
| [45597.801011] sd 0:0:0:0: [sda] Synchronizing SCSI cache |
| [45597.804465] sd 0:0:0:0: [sda] Stopping disk |
| [45597.988463] e1000e: EEE TX LPI TIMER: 00000011 |
| [45598.085811] ACPI: EC: interrupt blocked |
| [45598.125480] ACPI: Preparing to enter system sleep state S3 |
| [45598.128411] ACPI: EC: event blocked |
| [45598.128412] ACPI: EC: EC stopped |
| [45598.128413] PM: Saving platform NVS memory |
| [45598.128414] Disabling non-boot CPUs ... |
| [45598.141418] irq_migrate_all_off_this_cpu: 4 callbacks suppressed |
| [45598.141421] IRQ 21: no longer affine to CPU1 |
| [45598.141428] IRQ 26: no longer affine to CPU1 |
| [45598.141433] IRQ 27: no longer affine to CPU1 |
| [45598.141439] IRQ 33: no longer affine to CPU1 |
| [45598.142454] smpboot: CPU 1 is now offline |
| [45598.157518] IRQ 30: no longer affine to CPU2 |
| [45598.158539] smpboot: CPU 2 is now offline |
| [45598.173252] IRQ 1: no longer affine to CPU3 |
| [45598.173258] IRQ 8: no longer affine to CPU3 |
| [45598.173262] IRQ 9: no longer affine to CPU3 |
| [45598.173266] IRQ 12: no longer affine to CPU3 |
| [45598.173270] IRQ 17: no longer affine to CPU3 |
| [45598.174304] smpboot: CPU 3 is now offline |
| [45598.176812] ACPI: Low-level resume complete |
| [45598.176850] ACPI: EC: EC started |
| [45598.176850] PM: Restoring platform NVS memory |
| [45598.177172] Enabling non-boot CPUs ... |
| [45598.177577] x86: Booting SMP configuration: |
| [45598.177577] smpboot: Booting Node 0 Processor 1 APIC 0x1 |
| [45598.180162] cache: parent cpu1 should not be sleeping |
| [45598.180664] CPU1 is up |
| [45598.181058] smpboot: Booting Node 0 Processor 2 APIC 0x2 |
| [45598.183553] cache: parent cpu2 should not be sleeping |
| [45598.183908] CPU2 is up |
| [45598.184323] smpboot: Booting Node 0 Processor 3 APIC 0x3 |
| [45598.186814] cache: parent cpu3 should not be sleeping |
| [45598.187197] CPU3 is up |
| [45598.190552] ACPI: Waking up from system sleep state S3 |
| [45598.192904] pci 0000:00:16.0: Refused to change power state, currently in D3 |
| [45598.193008] ACPI: EC: interrupt unblocked |
| [45598.235173] sdhci-pci 0000:01:00.0: MMC controller base frequency changed to 50Mhz. |
| [45598.236710] ACPI: EC: event unblocked |
| [45598.238180] sd 0:0:0:0: [sda] Starting disk |
| [45598.238857] ath: phy0: ASPM enabled: 0x43 |
| [45598.494551] usb 1-1.4: reset full-speed USB device number 3 using ehci-pci |
| [45598.552956] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [45598.552983] ata2: SATA link down (SStatus 0 SControl 300) |
| [45598.553050] ata3: SATA link down (SStatus 0 SControl 300) |
| [45598.559643] ata1.00: supports DRM functions and may not be fully accessible |
| [45598.626144] ata1.00: supports DRM functions and may not be fully accessible |
| [45598.677663] ata1.00: configured for UDMA/133 |
| [45598.682588] usb 1-1.5: reset full-speed USB device number 4 using ehci-pci |
| [45598.690810] ata1.00: Enabling discard_zeroes_data |
| [45598.870592] usb 1-1.6: reset high-speed USB device number 5 using ehci-pci |
| [45598.944705] psmouse serio1: synaptics: queried max coordinates: x [..5768], y [..5062] |
| [45598.976294] psmouse serio1: synaptics: queried min coordinates: x [1174..], y [790..] |
| [45599.082621] OOM killer enabled. |
| [45599.082625] Restarting tasks ... done. |
| [45599.113869] video LNXVIDEO:00: Restoring backlight state |
| [45599.158685] PM: suspend exit |
| [45599.201125] Bluetooth: hci0: BCM: chip id 63 |
| [45599.202115] Bluetooth: hci0: BCM: features 0x07 |
| [45599.218147] Bluetooth: hci0: BCM20702A |
| [45599.219178] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000 |
| [45599.219196] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-21e6.hcd failed with error -2 |
| [45599.219200] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-21e6.hcd not found |
| [45599.326124] e1000e: enp0s25 NIC Link is Down |
| [45599.327932] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready |
| [45599.586844] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready |
| [45599.589135] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| [45599.608213] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| [45599.632665] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| [45599.706385] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| [45600.826140] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| [45600.880932] wlp2s0: authenticate with e8:df:70:34:c3:00 |
| [45600.895422] wlp2s0: send auth to e8:df:70:34:c3:00 (try 1/3) |
| [45600.899343] wlp2s0: authenticated |
| [45600.902556] wlp2s0: associate with e8:df:70:34:c3:00 (try 1/3) |
| [45600.908381] wlp2s0: RX AssocResp from e8:df:70:34:c3:00 (capab=0x431 status=0 aid=5) |
| [45600.908589] wlp2s0: associated |
| [45600.916162] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready |
| [45600.916868] ath: EEPROM regdomain: 0x8028 |
| [45600.916870] ath: EEPROM indicates we should expect a country code |
| [45600.916871] ath: doing EEPROM country->regdmn map search |
| [45600.916872] ath: country maps to regdmn code: 0x37 |
| [45600.916874] ath: Country alpha2 being used: AT |
| [45600.916875] ath: Regpair used: 0x37 |
| [45600.916876] ath: regdomain 0x8028 dynamically updated by country element |
| [46247.056800] atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0). |
| [46247.056810] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known. |
| [46247.057096] atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0). |
| [46247.057103] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known. |
| [46247.114321] wlp2s0: deauthenticating from e8:df:70:34:c3:00 by local choice (Reason: 3=DEAUTH_LEAVING) |
| [46247.151600] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| [46250.610035] PM: suspend entry (deep) |
| [46250.610042] PM: Syncing filesystems ... done. |
| [46250.623109] Freezing user space processes ... (elapsed 0.002 seconds) done. |
| [46250.625191] OOM killer disabled. |
| [46250.625193] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. |
| [46250.626396] printk: Suspending console(s) (use no_console_suspend to debug) |
| [46250.772311] sd 0:0:0:0: [sda] Synchronizing SCSI cache |
| [46250.775722] sd 0:0:0:0: [sda] Stopping disk |
| [46250.963946] e1000e: EEE TX LPI TIMER: 00000011 |
| [46251.057156] ACPI: EC: interrupt blocked |
| [46251.096858] ACPI: Preparing to enter system sleep state S3 |
| [46251.099806] ACPI: EC: event blocked |
| [46251.099806] ACPI: EC: EC stopped |
| [46251.099807] PM: Saving platform NVS memory |
| [46251.099809] Disabling non-boot CPUs ... |
| [46251.112813] irq_migrate_all_off_this_cpu: 4 callbacks suppressed |
| [46251.112816] IRQ 21: no longer affine to CPU1 |
| [46251.112822] IRQ 26: no longer affine to CPU1 |
| [46251.112827] IRQ 27: no longer affine to CPU1 |
| [46251.112833] IRQ 33: no longer affine to CPU1 |
| [46251.113846] smpboot: CPU 1 is now offline |
| [46251.128910] IRQ 30: no longer affine to CPU2 |
| [46251.129930] smpboot: CPU 2 is now offline |
| [46251.144652] IRQ 1: no longer affine to CPU3 |
| [46251.144657] IRQ 8: no longer affine to CPU3 |
| [46251.144661] IRQ 9: no longer affine to CPU3 |
| [46251.144665] IRQ 12: no longer affine to CPU3 |
| [46251.144670] IRQ 17: no longer affine to CPU3 |
| [46251.145704] smpboot: CPU 3 is now offline |
| [46251.148345] ACPI: Low-level resume complete |
| [46251.148380] ACPI: EC: EC started |
| [46251.148381] PM: Restoring platform NVS memory |
| [46251.148735] Enabling non-boot CPUs ... |
| [46251.149154] x86: Booting SMP configuration: |
| [46251.149155] smpboot: Booting Node 0 Processor 1 APIC 0x1 |
| [46251.151696] cache: parent cpu1 should not be sleeping |
| [46251.152195] CPU1 is up |
| [46251.152597] smpboot: Booting Node 0 Processor 2 APIC 0x2 |
| [46251.155076] cache: parent cpu2 should not be sleeping |
| [46251.155428] CPU2 is up |
| [46251.155854] smpboot: Booting Node 0 Processor 3 APIC 0x3 |
| [46251.158328] cache: parent cpu3 should not be sleeping |
| [46251.158701] CPU3 is up |
| [46251.161815] ACPI: Waking up from system sleep state S3 |
| [46251.164121] pci 0000:00:16.0: Refused to change power state, currently in D3 |
| [46251.164227] ACPI: EC: interrupt unblocked |
| [46251.202539] sdhci-pci 0000:01:00.0: MMC controller base frequency changed to 50Mhz. |
| [46251.204164] ACPI: EC: event unblocked |
| [46251.205417] ath: phy0: ASPM enabled: 0x43 |
| [46251.209383] sd 0:0:0:0: [sda] Starting disk |
| [46251.461975] usb 1-1.6: reset high-speed USB device number 5 using ehci-pci |
| [46251.516339] ata3: SATA link down (SStatus 0 SControl 300) |
| [46251.516506] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [46251.518774] ata1.00: supports DRM functions and may not be fully accessible |
| [46251.520334] ata2: SATA link down (SStatus 0 SControl 300) |
| [46251.586764] ata1.00: supports DRM functions and may not be fully accessible |
| [46251.640967] ata1.00: configured for UDMA/133 |
| [46251.654016] usb 1-1.4: reset full-speed USB device number 3 using ehci-pci |
| [46251.654407] ata1.00: Enabling discard_zeroes_data |
| [46251.841967] usb 1-1.5: reset full-speed USB device number 4 using ehci-pci |
| [46251.907407] psmouse serio1: synaptics: queried max coordinates: x [..5768], y [..5062] |
| [46251.938638] psmouse serio1: synaptics: queried min coordinates: x [1174..], y [790..] |
| [46252.043486] OOM killer enabled. |
| [46252.043490] Restarting tasks ... done. |
| [46252.075704] video LNXVIDEO:00: Restoring backlight state |
| [46252.110039] PM: suspend exit |
| [46252.163777] Bluetooth: hci0: BCM: chip id 63 |
| [46252.164771] Bluetooth: hci0: BCM: features 0x07 |
| [46252.180850] Bluetooth: hci0: BCM20702A |
| [46252.181858] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000 |
| [46252.181888] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-21e6.hcd failed with error -2 |
| [46252.181937] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-21e6.hcd not found |
| [46252.277724] e1000e: enp0s25 NIC Link is Down |
| [46252.279611] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready |
| [46252.538247] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready |
| [46252.540604] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| [46252.559656] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| [46252.584014] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| [46252.636822] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| [46252.969458] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 |
| [46253.168041] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input19 |
| [46253.752856] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| [46253.798608] wlp2s0: authenticate with e8:df:70:34:c3:00 |
| [46253.812931] wlp2s0: send auth to e8:df:70:34:c3:00 (try 1/3) |
| [46253.816563] wlp2s0: authenticated |
| [46253.817949] wlp2s0: associate with e8:df:70:34:c3:00 (try 1/3) |
| [46253.824618] wlp2s0: RX AssocResp from e8:df:70:34:c3:00 (capab=0x431 status=0 aid=8) |
| [46253.824836] wlp2s0: associated |
| [46253.829693] ath: EEPROM regdomain: 0x8028 |
| [46253.829694] ath: EEPROM indicates we should expect a country code |
| [46253.829695] ath: doing EEPROM country->regdmn map search |
| [46253.829695] ath: country maps to regdmn code: 0x37 |
| [46253.829696] ath: Country alpha2 being used: AT |
| [46253.829697] ath: Regpair used: 0x37 |
| [46253.829698] ath: regdomain 0x8028 dynamically updated by country element |
| [46253.832337] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready |
| [46297.506061] usb 1-1.2: new high-speed USB device number 8 using ehci-pci |
| [46297.616854] usb 1-1.2: New USB device found, idVendor=1e68, idProduct=0035, bcdDevice= 0.35 |
| [46297.616864] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [46297.616868] usb 1-1.2: Product: TrekStor USB-Stick CS |
| [46297.616872] usb 1-1.2: Manufacturer: TrekStor USB-Stick CS |
| [46297.616876] usb 1-1.2: SerialNumber: AA000000000948 |
| [46297.617672] usb-storage 1-1.2:1.0: USB Mass Storage device detected |
| [46297.618511] scsi host6: usb-storage 1-1.2:1.0 |
| [46299.019908] scsi 6:0:0:0: Direct-Access TrekStor TrekStor USB CS PQ: 0 ANSI: 0 CCS |
| [46299.020971] sd 6:0:0:0: Attached scsi generic sg1 type 0 |
| [46299.021507] sd 6:0:0:0: [sdb] 15257600 512-byte logical blocks: (7.81 GB/7.28 GiB) |
| [46299.022253] sd 6:0:0:0: [sdb] Write Protect is off |
| [46299.022256] sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00 |
| [46299.023010] sd 6:0:0:0: [sdb] No Caching mode page found |
| [46299.023013] sd 6:0:0:0: [sdb] Assuming drive cache: write through |
| [46299.026984] sdb: sdb1 |
| [46299.029751] sd 6:0:0:0: [sdb] Attached SCSI removable disk |
| [46496.196422] usb 1-1.2: USB disconnect, device number 8 |
| [46497.291275] atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0). |
| [46497.291285] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known. |
| [46497.291571] atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0). |
| [46497.291583] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known. |
| [46497.351918] wlp2s0: deauthenticating from e8:df:70:34:c3:00 by local choice (Reason: 3=DEAUTH_LEAVING) |
| [46497.389089] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| [46500.625325] PM: suspend entry (deep) |
| [46500.625330] PM: Syncing filesystems ... done. |
| [46500.635194] Freezing user space processes ... (elapsed 0.002 seconds) done. |
| [46500.637291] OOM killer disabled. |
| [46500.637294] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. |
| [46500.638397] printk: Suspending console(s) (use no_console_suspend to debug) |
| [46500.774336] sd 0:0:0:0: [sda] Synchronizing SCSI cache |
| [46500.777800] sd 0:0:0:0: [sda] Stopping disk |
| [46500.974775] e1000e: EEE TX LPI TIMER: 00000011 |
| [46501.067452] ACPI: EC: interrupt blocked |
| [46501.106862] ACPI: Preparing to enter system sleep state S3 |
| [46501.109779] ACPI: EC: event blocked |
| [46501.109780] ACPI: EC: EC stopped |
| [46501.109781] PM: Saving platform NVS memory |
| [46501.109782] Disabling non-boot CPUs ... |
| [46501.122795] irq_migrate_all_off_this_cpu: 4 callbacks suppressed |
| [46501.122798] IRQ 21: no longer affine to CPU1 |
| [46501.122805] IRQ 26: no longer affine to CPU1 |
| [46501.122809] IRQ 27: no longer affine to CPU1 |
| [46501.122816] IRQ 33: no longer affine to CPU1 |
| [46501.124454] smpboot: CPU 1 is now offline |
| [46501.138926] IRQ 30: no longer affine to CPU2 |
| [46501.139951] smpboot: CPU 2 is now offline |
| [46501.158646] IRQ 1: no longer affine to CPU3 |
| [46501.158651] IRQ 8: no longer affine to CPU3 |
| [46501.158655] IRQ 9: no longer affine to CPU3 |
| [46501.158659] IRQ 12: no longer affine to CPU3 |
| [46501.158663] IRQ 17: no longer affine to CPU3 |
| [46501.159695] smpboot: CPU 3 is now offline |
| [46501.162395] ACPI: Low-level resume complete |
| [46501.162430] ACPI: EC: EC started |
| [46501.162431] PM: Restoring platform NVS memory |
| [46501.162753] Enabling non-boot CPUs ... |
| [46501.163137] x86: Booting SMP configuration: |
| [46501.163138] smpboot: Booting Node 0 Processor 1 APIC 0x1 |
| [46501.165706] cache: parent cpu1 should not be sleeping |
| [46501.166201] CPU1 is up |
| [46501.166570] smpboot: Booting Node 0 Processor 2 APIC 0x2 |
| [46501.169067] cache: parent cpu2 should not be sleeping |
| [46501.169407] CPU2 is up |
| [46501.169804] smpboot: Booting Node 0 Processor 3 APIC 0x3 |
| [46501.172306] cache: parent cpu3 should not be sleeping |
| [46501.172676] CPU3 is up |
| [46501.176019] ACPI: Waking up from system sleep state S3 |
| [46501.178411] pci 0000:00:16.0: Refused to change power state, currently in D3 |
| [46501.178517] ACPI: EC: interrupt unblocked |
| [46501.216571] sdhci-pci 0000:01:00.0: MMC controller base frequency changed to 50Mhz. |
| [46501.218418] ACPI: EC: event unblocked |
| [46501.219609] ath: phy0: ASPM enabled: 0x43 |
| [46501.220087] sd 0:0:0:0: [sda] Starting disk |
| [46501.475934] usb 1-1.4: reset full-speed USB device number 3 using ehci-pci |
| [46501.534384] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [46501.534437] ata2: SATA link down (SStatus 0 SControl 300) |
| [46501.534465] ata3: SATA link down (SStatus 0 SControl 300) |
| [46501.540074] ata1.00: supports DRM functions and may not be fully accessible |
| [46501.608517] ata1.00: supports DRM functions and may not be fully accessible |
| [46501.660007] ata1.00: configured for UDMA/133 |
| [46501.664027] usb 1-1.5: reset full-speed USB device number 4 using ehci-pci |
| [46501.673196] ata1.00: Enabling discard_zeroes_data |
| [46501.851982] usb 1-1.6: reset high-speed USB device number 5 using ehci-pci |
| [46501.927534] psmouse serio1: synaptics: queried max coordinates: x [..5768], y [..5062] |
| [46501.958871] psmouse serio1: synaptics: queried min coordinates: x [1174..], y [790..] |
| [46502.065567] OOM killer enabled. |
| [46502.065571] Restarting tasks ... done. |
| [46502.101028] video LNXVIDEO:00: Restoring backlight state |
| [46502.151963] PM: suspend exit |
| [46502.194250] Bluetooth: hci0: BCM: chip id 63 |
| [46502.195244] Bluetooth: hci0: BCM: features 0x07 |
| [46502.211266] Bluetooth: hci0: BCM20702A |
| [46502.212247] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000 |
| [46502.212284] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-21e6.hcd failed with error -2 |
| [46502.212287] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-21e6.hcd not found |
| [46502.311475] e1000e: enp0s25 NIC Link is Down |
| [46502.313295] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready |
| [46502.564146] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready |
| [46502.566334] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| [46502.585764] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| [46502.610074] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| [46502.671440] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| [46503.777267] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| [46503.860104] wlp2s0: authenticate with e8:df:70:34:c3:00 |
| [46503.874390] wlp2s0: send auth to e8:df:70:34:c3:00 (try 1/3) |
| [46503.877744] wlp2s0: authenticated |
| [46503.879943] wlp2s0: associate with e8:df:70:34:c3:00 (try 1/3) |
| [46503.887694] wlp2s0: RX AssocResp from e8:df:70:34:c3:00 (capab=0x431 status=0 aid=3) |
| [46503.887934] wlp2s0: associated |
| [46503.895230] ath: EEPROM regdomain: 0x8028 |
| [46503.895232] ath: EEPROM indicates we should expect a country code |
| [46503.895233] ath: doing EEPROM country->regdmn map search |
| [46503.895234] ath: country maps to regdmn code: 0x37 |
| [46503.895235] ath: Country alpha2 being used: AT |
| [46503.895236] ath: Regpair used: 0x37 |
| [46503.895238] ath: regdomain 0x8028 dynamically updated by country element |
| [46503.897612] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready |
| [79159.012337] atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0). |
| [79159.012345] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known. |
| [79159.012658] atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0). |
| [79159.012678] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known. |
| [79159.074488] wlp2s0: deauthenticating from e8:df:70:34:c3:00 by local choice (Reason: 3=DEAUTH_LEAVING) |
| [79159.116900] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| [79161.603811] PM: suspend entry (deep) |
| [79161.603815] PM: Syncing filesystems ... done. |
| [79161.614782] Freezing user space processes ... (elapsed 0.002 seconds) done. |
| [79161.616934] OOM killer disabled. |
| [79161.616936] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. |
| [79161.618124] printk: Suspending console(s) (use no_console_suspend to debug) |
| [79161.790162] sd 0:0:0:0: [sda] Synchronizing SCSI cache |
| [79161.793626] sd 0:0:0:0: [sda] Stopping disk |
| [79161.985635] e1000e: EEE TX LPI TIMER: 00000011 |
| [79162.083194] ACPI: EC: interrupt blocked |
| [79162.122642] ACPI: Preparing to enter system sleep state S3 |
| [79162.125694] ACPI: EC: event blocked |
| [79162.125695] ACPI: EC: EC stopped |
| [79162.125695] PM: Saving platform NVS memory |
| [79162.125697] Disabling non-boot CPUs ... |
| [79162.138565] irq_migrate_all_off_this_cpu: 4 callbacks suppressed |
| [79162.138567] IRQ 21: no longer affine to CPU1 |
| [79162.138575] IRQ 26: no longer affine to CPU1 |
| [79162.138580] IRQ 27: no longer affine to CPU1 |
| [79162.138586] IRQ 33: no longer affine to CPU1 |
| [79162.140218] smpboot: CPU 1 is now offline |
| [79162.154655] IRQ 30: no longer affine to CPU2 |
| [79162.156286] smpboot: CPU 2 is now offline |
| [79162.186428] IRQ 1: no longer affine to CPU3 |
| [79162.186433] IRQ 8: no longer affine to CPU3 |
| [79162.186437] IRQ 9: no longer affine to CPU3 |
| [79162.186441] IRQ 12: no longer affine to CPU3 |
| [79162.186445] IRQ 17: no longer affine to CPU3 |
| [79162.187469] smpboot: CPU 3 is now offline |
| [79162.190128] ACPI: Low-level resume complete |
| [79162.190165] ACPI: EC: EC started |
| [79162.190165] PM: Restoring platform NVS memory |
| [79162.190518] Enabling non-boot CPUs ... |
| [79162.190917] x86: Booting SMP configuration: |
| [79162.190918] smpboot: Booting Node 0 Processor 1 APIC 0x1 |
| [79162.193447] cache: parent cpu1 should not be sleeping |
| [79162.193946] CPU1 is up |
| [79162.194334] smpboot: Booting Node 0 Processor 2 APIC 0x2 |
| [79162.196797] cache: parent cpu2 should not be sleeping |
| [79162.197150] CPU2 is up |
| [79162.197560] smpboot: Booting Node 0 Processor 3 APIC 0x3 |
| [79162.200022] cache: parent cpu3 should not be sleeping |
| [79162.200402] CPU3 is up |
| [79162.203753] ACPI: Waking up from system sleep state S3 |
| [79162.205981] pci 0000:00:16.0: Refused to change power state, currently in D3 |
| [79162.206091] ACPI: EC: interrupt unblocked |
| [79162.244310] sdhci-pci 0000:01:00.0: MMC controller base frequency changed to 50Mhz. |
| [79162.246118] ACPI: EC: event unblocked |
| [79162.247589] ath: phy0: ASPM enabled: 0x43 |
| [79162.254536] sd 0:0:0:0: [sda] Starting disk |
| [79162.503681] usb 1-1.6: reset high-speed USB device number 5 using ehci-pci |
| [79162.562079] ata2: SATA link down (SStatus 0 SControl 300) |
| [79162.562193] ata3: SATA link down (SStatus 0 SControl 300) |
| [79162.562226] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [79162.569061] ata1.00: supports DRM functions and may not be fully accessible |
| [79162.637260] ata1.00: supports DRM functions and may not be fully accessible |
| [79162.691166] ata1.00: configured for UDMA/133 |
| [79162.695758] usb 1-1.5: reset full-speed USB device number 4 using ehci-pci |
| [79162.704702] ata1.00: Enabling discard_zeroes_data |
| [79162.883728] usb 1-1.4: reset full-speed USB device number 3 using ehci-pci |
| [79162.951716] psmouse serio1: synaptics: queried max coordinates: x [..5768], y [..5062] |
| [79162.982874] psmouse serio1: synaptics: queried min coordinates: x [1174..], y [790..] |
| [79163.088876] OOM killer enabled. |
| [79163.088879] Restarting tasks ... done. |
| [79163.123781] video LNXVIDEO:00: Restoring backlight state |
| [79163.171867] PM: suspend exit |
| [79163.213497] Bluetooth: hci0: BCM: chip id 63 |
| [79163.214491] Bluetooth: hci0: BCM: features 0x07 |
| [79163.230495] Bluetooth: hci0: BCM20702A |
| [79163.231488] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000 |
| [79163.231518] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-21e6.hcd failed with error -2 |
| [79163.231522] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-21e6.hcd not found |
| [79163.387272] e1000e: enp0s25 NIC Link is Down |
| [79163.388963] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready |
| [79163.640054] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready |
| [79163.642746] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| [79163.662122] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| [79163.686343] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| [79163.740850] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| [79164.020186] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 |
| [79164.209951] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input20 |
| [79165.926115] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| [79165.982020] wlp2s0: authenticate with e8:df:70:34:c3:00 |
| [79165.996394] wlp2s0: send auth to e8:df:70:34:c3:00 (try 1/3) |
| [79165.999698] wlp2s0: authenticated |
| [79166.003697] wlp2s0: associate with e8:df:70:34:c3:00 (try 1/3) |
| [79166.009066] wlp2s0: RX AssocResp from e8:df:70:34:c3:00 (capab=0x431 status=0 aid=5) |
| [79166.009228] wlp2s0: associated |
| [79166.015425] ath: EEPROM regdomain: 0x8028 |
| [79166.015427] ath: EEPROM indicates we should expect a country code |
| [79166.015428] ath: doing EEPROM country->regdmn map search |
| [79166.015429] ath: country maps to regdmn code: 0x37 |
| [79166.015430] ath: Country alpha2 being used: AT |
| [79166.015430] ath: Regpair used: 0x37 |
| [79166.015432] ath: regdomain 0x8028 dynamically updated by country element |
| [79166.017615] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready |