blob: 885c8c9e4364b1cd70f8a2ff570a4f52678634e7 [file] [log] [blame]
[ 0.000000] Linux version 5.10.0-9-amd64 (debian-kernel@lists.debian.org) (gcc-10 (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Debian 5.10.70-1 (2021-09-30)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-5.10.0-9-amd64 root=/dev/mapper/black--vg-root ro quiet iomem=relaxed
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ff14fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007ff15000-0x00000000829fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000047d5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 3.0 present.
[ 0.000000] DMI: LENOVO 2325QL5/2325QL5, BIOS CBET4000 4.15-543-g74d2218cc7 12/15/2021
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2893.569 MHz processor
[ 0.000471] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000474] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000478] last_pfn = 0x47d600 max_arch_pfn = 0x400000000
[ 0.000482] MTRR default type: uncachable
[ 0.000483] MTRR fixed ranges enabled:
[ 0.000484] 00000-9FFFF write-back
[ 0.000485] A0000-BFFFF uncachable
[ 0.000485] C0000-FFFFF write-back
[ 0.000486] MTRR variable ranges enabled:
[ 0.000488] 0 base 000000000 mask F80000000 write-back
[ 0.000489] 1 base 090000000 mask FF0000000 write-combining
[ 0.000490] 2 base 100000000 mask F00000000 write-back
[ 0.000491] 3 base 200000000 mask E00000000 write-back
[ 0.000491] 4 base 400000000 mask F80000000 write-back
[ 0.000492] 5 base 47D600000 mask FFFE00000 uncachable
[ 0.000493] 6 base 47D800000 mask FFF800000 uncachable
[ 0.000494] 7 base 47E000000 mask FFE000000 uncachable
[ 0.000495] 8 disabled
[ 0.000495] 9 disabled
[ 0.000793] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.001027] last_pfn = 0x7ff15 max_arch_pfn = 0x400000000
[ 0.010986] RAMDISK: [mem 0x3287d000-0x35435fff]
[ 0.010989] ACPI: Early table checksum verification disabled
[ 0.010992] ACPI: RSDP 0x00000000000F6790 000024 (v02 COREv4)
[ 0.010996] ACPI: XSDT 0x000000007FF380E0 00005C (v01 COREv4 COREBOOT 00000000 CORE 20210331)
[ 0.011001] ACPI: FACP 0x000000007FF3BAF0 000114 (v06 COREv4 COREBOOT 00000000 CORE 20210331)
[ 0.011006] ACPI: DSDT 0x000000007FF38280 00386D (v02 COREv4 COREBOOT 20110725 INTL 20210331)
[ 0.011010] ACPI: FACS 0x000000007FF38240 000040
[ 0.011012] ACPI: FACS 0x000000007FF38240 000040
[ 0.011015] ACPI: SSDT 0x000000007FF3BC10 0017BB (v02 COREv4 COREBOOT 0000002A CORE 20210331)
[ 0.011018] ACPI: MCFG 0x000000007FF3D3D0 00003C (v01 COREv4 COREBOOT 00000000 CORE 20210331)
[ 0.011021] ACPI: TCPA 0x000000007FF3D410 000032 (v02 COREv4 COREBOOT 00000000 CORE 20210331)
[ 0.011024] ACPI: APIC 0x000000007FF3D450 00006C (v03 COREv4 COREBOOT 00000000 CORE 20210331)
[ 0.011026] ACPI: DMAR 0x000000007FF3D4C0 0000C0 (v01 COREv4 COREBOOT 00000000 CORE 20210331)
[ 0.011029] ACPI: HPET 0x000000007FF3D580 000038 (v01 COREv4 COREBOOT 00000000 CORE 20210331)
[ 0.011032] ACPI: Reserving FACP table memory at [mem 0x7ff3baf0-0x7ff3bc03]
[ 0.011033] ACPI: Reserving DSDT table memory at [mem 0x7ff38280-0x7ff3baec]
[ 0.011034] ACPI: Reserving FACS table memory at [mem 0x7ff38240-0x7ff3827f]
[ 0.011035] ACPI: Reserving FACS table memory at [mem 0x7ff38240-0x7ff3827f]
[ 0.011035] ACPI: Reserving SSDT table memory at [mem 0x7ff3bc10-0x7ff3d3ca]
[ 0.011036] ACPI: Reserving MCFG table memory at [mem 0x7ff3d3d0-0x7ff3d40b]
[ 0.011037] ACPI: Reserving TCPA table memory at [mem 0x7ff3d410-0x7ff3d441]
[ 0.011038] ACPI: Reserving APIC table memory at [mem 0x7ff3d450-0x7ff3d4bb]
[ 0.011038] ACPI: Reserving DMAR table memory at [mem 0x7ff3d4c0-0x7ff3d57f]
[ 0.011039] ACPI: Reserving HPET table memory at [mem 0x7ff3d580-0x7ff3d5b7]
[ 0.011047] ACPI: Local APIC address 0xfee00000
[ 0.011097] No NUMA configuration found
[ 0.011098] Faking a node at [mem 0x0000000000000000-0x000000047d5fffff]
[ 0.011108] NODE_DATA(0) allocated [mem 0x47d5c9000-0x47d5f2fff]
[ 0.011513] Zone ranges:
[ 0.011514] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.011515] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.011517] Normal [mem 0x0000000100000000-0x000000047d5fffff]
[ 0.011518] Device empty
[ 0.011519] Movable zone start for each node
[ 0.011522] Early memory node ranges
[ 0.011523] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.011524] node 0: [mem 0x0000000000100000-0x000000007ff14fff]
[ 0.011525] node 0: [mem 0x0000000100000000-0x000000047d5fffff]
[ 0.011528] Initmem setup node 0 [mem 0x0000000000001000-0x000000047d5fffff]
[ 0.011529] On node 0 totalpages: 4183219
[ 0.011530] DMA zone: 64 pages used for memmap
[ 0.011531] DMA zone: 21 pages reserved
[ 0.011532] DMA zone: 3998 pages, LIFO batch:0
[ 0.011533] DMA32 zone: 8125 pages used for memmap
[ 0.011534] DMA32 zone: 519957 pages, LIFO batch:63
[ 0.011535] Normal zone: 57176 pages used for memmap
[ 0.011535] Normal zone: 3659264 pages, LIFO batch:63
[ 0.011539] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.011574] On node 0, zone DMA: 97 pages in unavailable ranges
[ 0.016547] On node 0, zone Normal: 235 pages in unavailable ranges
[ 0.016653] On node 0, zone Normal: 10752 pages in unavailable ranges
[ 0.016661] Reserving Intel graphics memory at [mem 0x80a00000-0x829fffff]
[ 0.016853] ACPI: PM-Timer IO Port: 0x508
[ 0.016855] ACPI: Local APIC address 0xfee00000
[ 0.016870] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.016872] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.016874] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.016876] ACPI: IRQ0 used by override.
[ 0.016877] ACPI: IRQ9 used by override.
[ 0.016879] Using ACPI (MADT) for SMP configuration information
[ 0.016880] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.016884] TSC deadline timer available
[ 0.016886] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.016896] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.016898] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.016898] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.016899] PM: hibernation: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.016900] PM: hibernation: Registered nosave memory: [mem 0x7ff15000-0x829fffff]
[ 0.016901] PM: hibernation: Registered nosave memory: [mem 0x82a00000-0xefffffff]
[ 0.016902] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
[ 0.016903] PM: hibernation: Registered nosave memory: [mem 0xf4000000-0xfed3ffff]
[ 0.016903] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[ 0.016904] PM: hibernation: Registered nosave memory: [mem 0xfed45000-0xfed8ffff]
[ 0.016904] PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfed91fff]
[ 0.016905] PM: hibernation: Registered nosave memory: [mem 0xfed92000-0xffffffff]
[ 0.016907] [mem 0x82a00000-0xefffffff] available for PCI devices
[ 0.016908] Booting paravirtualized kernel on bare hardware
[ 0.016911] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.020774] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.020968] percpu: Embedded 54 pages/cpu s184152 r8192 d28840 u524288
[ 0.020974] pcpu-alloc: s184152 r8192 d28840 u524288 alloc=1*2097152
[ 0.020975] pcpu-alloc: [0] 0 1 2 3
[ 0.021000] Built 1 zonelists, mobility grouping on. Total pages: 4117833
[ 0.021001] Policy zone: Normal
[ 0.021003] Kernel command line: BOOT_IMAGE=/vmlinuz-5.10.0-9-amd64 root=/dev/mapper/black--vg-root ro quiet iomem=relaxed
[ 0.021918] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ 0.022357] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.022403] mem auto-init: stack:off, heap alloc:on, heap free:off
[ 0.036461] Memory: 2116240K/16732876K available (12295K kernel code, 2544K rwdata, 7560K rodata, 2392K init, 3700K bss, 433524K reserved, 0K cma-reserved)
[ 0.036469] random: get_random_u64 called from __kmem_cache_create+0x2a/0x540 with crng_init=0
[ 0.036575] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.036586] Kernel/User page tables isolation: enabled
[ 0.036601] ftrace: allocating 36426 entries in 143 pages
[ 0.048587] ftrace: allocated 143 pages with 5 groups
[ 0.048686] rcu: Hierarchical RCU implementation.
[ 0.048688] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[ 0.048689] Rude variant of Tasks RCU enabled.
[ 0.048689] Tracing variant of Tasks RCU enabled.
[ 0.048690] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.048691] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.052425] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16
[ 0.052644] random: crng done (trusting CPU's manufacturer)
[ 0.052664] spurious 8259A interrupt: IRQ7.
[ 0.052980] Console: colour dummy device 80x25
[ 0.052992] printk: console [tty0] enabled
[ 0.053005] ACPI: Core revision 20200925
[ 0.053075] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.053089] APIC: Switch to symmetric I/O mode setup
[ 0.053091] DMAR: Host address width 36
[ 0.053092] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.053097] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[ 0.053098] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.053101] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[ 0.053101] DMAR: RMRR base: 0x00000080800000 end: 0x000000829fffff
[ 0.053104] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.053105] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.053105] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.053562] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.053563] x2apic enabled
[ 0.053570] Switched APIC routing to cluster x2apic.
[ 0.054014] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.073089] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x29b587d8064, max_idle_ns: 440795286777 ns
[ 0.073093] Calibrating delay loop (skipped), value calculated using timer frequency.. 5787.13 BogoMIPS (lpj=11574276)
[ 0.073096] pid_max: default: 32768 minimum: 301
[ 0.073119] LSM: Security Framework initializing
[ 0.073128] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.073153] AppArmor: AppArmor initialized
[ 0.073155] TOMOYO Linux initialized
[ 0.073194] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.073227] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.073474] mce: CPU0: Thermal monitoring enabled (TM1)
[ 0.073484] process: using mwait in idle threads
[ 0.073486] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.073487] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.073489] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.073491] Spectre V2 : Mitigation: Full generic retpoline
[ 0.073492] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.073492] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.073494] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.073495] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[ 0.073496] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.073499] SRBDS: Vulnerable: No microcode
[ 0.073499] MDS: Mitigation: Clear CPU buffers
[ 0.073612] Freeing SMP alternatives memory: 32K
[ 0.075312] smpboot: CPU0: Intel(R) Core(TM) i7-3520M CPU @ 2.90GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[ 0.075452] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.075460] ... version: 3
[ 0.075461] ... bit width: 48
[ 0.075461] ... generic registers: 4
[ 0.075462] ... value mask: 0000ffffffffffff
[ 0.075462] ... max period: 00007fffffffffff
[ 0.075463] ... fixed-purpose events: 3
[ 0.075464] ... event mask: 000000070000000f
[ 0.075584] rcu: Hierarchical SRCU implementation.
[ 0.076054] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.076104] smp: Bringing up secondary CPUs ...
[ 0.076186] x86: Booting SMP configuration:
[ 0.076188] .... node #0, CPUs: #1
[ 0.077091] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[ 0.077091] #2 #3
[ 0.079528] smp: Brought up 1 node, 4 CPUs
[ 0.079528] smpboot: Max logical packages: 1
[ 0.079528] smpboot: Total of 4 processors activated (23148.55 BogoMIPS)
[ 0.109629] node 0 deferred pages initialised in 32ms
[ 0.109659] devtmpfs: initialized
[ 0.109659] x86/mm: Memory block size: 128MB
[ 0.110197] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.110197] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.110197] pinctrl core: initialized pinctrl subsystem
[ 0.110197] NET: Registered protocol family 16
[ 0.110197] audit: initializing netlink subsys (disabled)
[ 0.110197] audit: type=2000 audit(1639653341.056:1): state=initialized audit_enabled=0 res=1
[ 0.110197] thermal_sys: Registered thermal governor 'fair_share'
[ 0.110197] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.110197] thermal_sys: Registered thermal governor 'step_wise'
[ 0.110197] thermal_sys: Registered thermal governor 'user_space'
[ 0.110197] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.110197] cpuidle: using governor ladder
[ 0.110197] cpuidle: using governor menu
[ 0.110197] ACPI: bus type PCI registered
[ 0.110197] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.110197] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.110197] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.110197] PCI: Using configuration type 1 for base access
[ 0.110197] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.110197] Kprobes globally optimized
[ 0.110197] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.261153] ACPI: Added _OSI(Module Device)
[ 0.261154] ACPI: Added _OSI(Processor Device)
[ 0.261155] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.261156] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.261157] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.261158] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.261159] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.263221] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.263924] ACPI: EC: EC started
[ 0.263925] ACPI: EC: interrupt blocked
[ 0.264237] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.264239] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC used to handle transactions
[ 0.264240] ACPI: Interpreter enabled
[ 0.264255] ACPI: (supports S0 S3 S4 S5)
[ 0.264256] ACPI: Using IOAPIC for interrupt routing
[ 0.264272] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.264384] ACPI: Enabled 1 GPEs in block 00 to 3F
[ 0.264384] ACPI: Power Resource [FPWR] (off)
[ 0.264384] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.264384] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.264384] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[ 0.264384] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.264384] acpi PNP0A08:00: ignoring host bridge window [mem 0x000c4000-0x000c7fff window] (conflicts with Video ROM [mem 0x000c0000-0x000c6dff])
[ 0.264384] PCI host bridge to bus 0000:00
[ 0.264384] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.264384] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.264384] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.264384] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.264384] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.264384] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.264384] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.264384] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.264384] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.264384] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.264384] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.264384] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.264384] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.264384] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.264384] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[ 0.264384] pci_bus 0000:00: root bus resource [mem 0x82a00000-0xefffffff window]
[ 0.264384] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[ 0.264384] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.264384] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.264384] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 0.264384] pci 0000:00:02.0: reg 0x10: [mem 0x82c00000-0x82ffffff 64bit]
[ 0.264384] pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit pref]
[ 0.264384] pci 0000:00:02.0: reg 0x20: [io 0x1000-0x103f]
[ 0.264384] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000
[ 0.264384] pci 0000:00:04.0: reg 0x10: [mem 0x83830000-0x83837fff 64bit]
[ 0.264384] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.264384] pci 0000:00:14.0: reg 0x10: [mem 0x83820000-0x8382ffff 64bit]
[ 0.264429] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.264551] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.264630] pci 0000:00:16.0: reg 0x10: [mem 0x83842000-0x8384200f 64bit]
[ 0.264954] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.265076] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[ 0.265089] pci 0000:00:19.0: reg 0x10: [mem 0x83800000-0x8381ffff]
[ 0.265098] pci 0000:00:19.0: reg 0x14: [mem 0x8383c000-0x8383cfff]
[ 0.265106] pci 0000:00:19.0: reg 0x18: [io 0x1040-0x105f]
[ 0.265164] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.265232] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.265248] pci 0000:00:1a.0: reg 0x10: [mem 0x8383f000-0x8383f3ff]
[ 0.265328] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.265409] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.265426] pci 0000:00:1b.0: reg 0x10: [mem 0x83838000-0x8383bfff 64bit]
[ 0.265503] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.265592] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.265741] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.265776] pci 0000:00:1c.0: Enabling MPC IRBNCE
[ 0.265779] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled
[ 0.265871] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 0.266018] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.266051] pci 0000:00:1c.1: Enabling MPC IRBNCE
[ 0.266054] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled
[ 0.266145] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[ 0.266315] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.266348] pci 0000:00:1c.2: Enabling MPC IRBNCE
[ 0.266350] pci 0000:00:1c.2: Intel PCH root port ACS workaround enabled
[ 0.266419] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.266434] pci 0000:00:1d.0: reg 0x10: [mem 0x83840000-0x838403ff]
[ 0.266515] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.266594] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100
[ 0.266761] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.266773] pci 0000:00:1f.2: reg 0x10: [io 0x1080-0x1087]
[ 0.266781] pci 0000:00:1f.2: reg 0x14: [io 0x1090-0x1093]
[ 0.266788] pci 0000:00:1f.2: reg 0x18: [io 0x1088-0x108f]
[ 0.266795] pci 0000:00:1f.2: reg 0x1c: [io 0x1094-0x1097]
[ 0.266803] pci 0000:00:1f.2: reg 0x20: [io 0x1060-0x107f]
[ 0.266810] pci 0000:00:1f.2: reg 0x24: [mem 0x8383e000-0x8383e7ff]
[ 0.266849] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.266918] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.266934] pci 0000:00:1f.3: reg 0x10: [mem 0x83841000-0x838410ff 64bit]
[ 0.266954] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.267041] pci 0000:00:1f.6: [8086:1e24] type 00 class 0x118000
[ 0.267060] pci 0000:00:1f.6: reg 0x10: [mem 0x8383d000-0x8383dfff 64bit]
[ 0.267295] pci 0000:01:00.0: MMC controller base frequency changed to 50Mhz.
[ 0.267302] pci 0000:01:00.0: [1180:e823] type 00 class 0x080501
[ 0.267351] pci 0000:01:00.0: reg 0x10: [mem 0x82a00000-0x82a000ff]
[ 0.267674] pci 0000:01:00.0: supports D1 D2
[ 0.267675] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.267915] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.267921] pci 0000:00:1c.0: bridge window [mem 0x82a00000-0x82afffff]
[ 0.268029] pci 0000:02:00.0: [168c:002b] type 00 class 0x028000
[ 0.268072] pci 0000:02:00.0: reg 0x10: [mem 0x82b00000-0x82b0ffff 64bit]
[ 0.268298] pci 0000:02:00.0: supports D1
[ 0.268299] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold
[ 0.268485] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.268490] pci 0000:00:1c.1: bridge window [mem 0x82b00000-0x82bfffff]
[ 0.268555] pci 0000:00:1c.2: PCI bridge to [bus 03-0b]
[ 0.268560] pci 0000:00:1c.2: bridge window [io 0x2000-0x3fff]
[ 0.268565] pci 0000:00:1c.2: bridge window [mem 0x83000000-0x837fffff]
[ 0.268572] pci 0000:00:1c.2: bridge window [mem 0x47d600000-0x48d5fffff 64bit pref]
[ 0.268731] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.268775] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.268814] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.268853] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.268892] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.268934] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.268973] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.269012] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.269630] ACPI: EC: interrupt unblocked
[ 0.269631] ACPI: EC: event unblocked
[ 0.269637] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.269637] ACPI: EC: GPE=0x11
[ 0.269639] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC initialization complete
[ 0.269640] ACPI: \_SB_.PCI0.LPCB.EC__: EC: Used to handle transactions and events
[ 0.269691] iommu: Default domain type: Translated
[ 0.273104] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.273104] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.273104] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.273104] vgaarb: loaded
[ 0.273162] EDAC MC: Ver: 3.0.0
[ 0.273247] NetLabel: Initializing
[ 0.273247] NetLabel: domain hash size = 128
[ 0.273247] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.273247] NetLabel: unlabeled traffic allowed by default
[ 0.273247] PCI: Using ACPI for IRQ routing
[ 0.274944] PCI: pci_cache_line_size set to 64 bytes
[ 0.274948] pci 0000:00:1c.2: can't claim BAR 15 [mem 0x47d600000-0x48d5fffff 64bit pref]: no compatible bridge window
[ 0.275023] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.275026] e820: reserve RAM buffer [mem 0x7ff15000-0x7fffffff]
[ 0.275027] e820: reserve RAM buffer [mem 0x47d600000-0x47fffffff]
[ 0.275049] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.275054] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.277112] clocksource: Switched to clocksource tsc-early
[ 0.286507] VFS: Disk quotas dquot_6.6.0
[ 0.286521] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.286625] AppArmor: AppArmor Filesystem Enabled
[ 0.286641] pnp: PnP ACPI init
[ 0.286809] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.286811] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.286812] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.286813] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.286814] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.286815] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.286816] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.286817] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.286819] system 00:00: [mem 0x20000000-0x201fffff] could not be reserved
[ 0.286820] system 00:00: [mem 0x40000000-0x401fffff] could not be reserved
[ 0.286826] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.287262] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.287265] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.287299] system 00:02: [io 0x0500-0x057f] has been reserved
[ 0.287300] system 00:02: [io 0x0480-0x04bf] has been reserved
[ 0.287303] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.287318] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.287342] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.287361] pnp 00:05: Plug and Play ACPI device, IDs LEN0020 PNP0f13 (active)
[ 0.287380] pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active)
[ 0.287396] pnp: PnP ACPI: found 7 devices
[ 0.293036] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.293088] NET: Registered protocol family 2
[ 0.293227] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.295166] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 0.295238] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.295435] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.295508] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.295549] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.295590] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.295771] NET: Registered protocol family 1
[ 0.295776] NET: Registered protocol family 44
[ 0.295788] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03-0b] add_size 200000 add_align 100000
[ 0.295803] pci 0000:00:1c.2: BAR 15: assigned [mem 0x83900000-0x83afffff 64bit pref]
[ 0.295806] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.295813] pci 0000:00:1c.0: bridge window [mem 0x82a00000-0x82afffff]
[ 0.295824] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.295830] pci 0000:00:1c.1: bridge window [mem 0x82b00000-0x82bfffff]
[ 0.295841] pci 0000:00:1c.2: PCI bridge to [bus 03-0b]
[ 0.295844] pci 0000:00:1c.2: bridge window [io 0x2000-0x3fff]
[ 0.295850] pci 0000:00:1c.2: bridge window [mem 0x83000000-0x837fffff]
[ 0.295854] pci 0000:00:1c.2: bridge window [mem 0x83900000-0x83afffff 64bit pref]
[ 0.295863] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.295864] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.295865] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.295866] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.295867] pci_bus 0000:00: resource 8 [mem 0x000c8000-0x000cbfff window]
[ 0.295868] pci_bus 0000:00: resource 9 [mem 0x000cc000-0x000cffff window]
[ 0.295869] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window]
[ 0.295870] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window]
[ 0.295871] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window]
[ 0.295872] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window]
[ 0.295873] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window]
[ 0.295874] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window]
[ 0.295875] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window]
[ 0.295876] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window]
[ 0.295877] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff window]
[ 0.295878] pci_bus 0000:00: resource 19 [mem 0x82a00000-0xefffffff window]
[ 0.295879] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed44fff window]
[ 0.295880] pci_bus 0000:01: resource 1 [mem 0x82a00000-0x82afffff]
[ 0.295881] pci_bus 0000:02: resource 1 [mem 0x82b00000-0x82bfffff]
[ 0.295882] pci_bus 0000:03: resource 0 [io 0x2000-0x3fff]
[ 0.295883] pci_bus 0000:03: resource 1 [mem 0x83000000-0x837fffff]
[ 0.295884] pci_bus 0000:03: resource 2 [mem 0x83900000-0x83afffff 64bit pref]
[ 0.295942] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.296440] PCI: CLS 64 bytes, default 64
[ 0.296487] Trying to unpack rootfs image as initramfs...
[ 0.911492] Freeing initrd memory: 44772K
[ 0.911534] DMAR: No ATSR found
[ 0.911565] DMAR: dmar0: Using Queued invalidation
[ 0.911570] DMAR: dmar1: Using Queued invalidation
[ 0.983377] pci 0000:00:00.0: Adding to iommu group 0
[ 0.983386] pci 0000:00:02.0: Adding to iommu group 1
[ 0.983394] pci 0000:00:04.0: Adding to iommu group 2
[ 0.983401] pci 0000:00:14.0: Adding to iommu group 3
[ 0.983412] pci 0000:00:16.0: Adding to iommu group 4
[ 0.983420] pci 0000:00:19.0: Adding to iommu group 5
[ 0.983428] pci 0000:00:1a.0: Adding to iommu group 6
[ 0.983435] pci 0000:00:1b.0: Adding to iommu group 7
[ 0.983443] pci 0000:00:1c.0: Adding to iommu group 8
[ 0.983451] pci 0000:00:1c.1: Adding to iommu group 9
[ 0.983460] pci 0000:00:1c.2: Adding to iommu group 10
[ 0.983468] pci 0000:00:1d.0: Adding to iommu group 11
[ 0.983485] pci 0000:00:1f.0: Adding to iommu group 12
[ 0.983493] pci 0000:00:1f.2: Adding to iommu group 12
[ 0.983501] pci 0000:00:1f.3: Adding to iommu group 12
[ 0.983508] pci 0000:00:1f.6: Adding to iommu group 12
[ 0.983519] pci 0000:01:00.0: Adding to iommu group 13
[ 0.983527] pci 0000:02:00.0: Adding to iommu group 14
[ 0.985381] DMAR: Intel(R) Virtualization Technology for Directed I/O
[ 0.985382] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.985384] software IO TLB: mapped [mem 0x000000007bf15000-0x000000007ff15000] (64MB)
[ 0.985743] Initialise system trusted keyrings
[ 0.985752] Key type blacklist registered
[ 0.985792] workingset: timestamp_bits=36 max_order=22 bucket_order=0
[ 0.986762] zbud: loaded
[ 0.986908] integrity: Platform Keyring initialized
[ 0.986910] Key type asymmetric registered
[ 0.986911] Asymmetric key parser 'x509' registered
[ 0.986918] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.986956] io scheduler mq-deadline registered
[ 0.987221] pcieport 0000:00:1c.0: PME: Signaling with IRQ 26
[ 0.987434] pcieport 0000:00:1c.1: PME: Signaling with IRQ 27
[ 0.987635] pcieport 0000:00:1c.2: PME: Signaling with IRQ 28
[ 0.987665] pcieport 0000:00:1c.2: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[ 0.987802] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.987812] intel_idle: MWAIT substates: 0x21120
[ 0.987813] intel_idle: v0.5.1 model 0x3A
[ 0.987973] intel_idle: Local APIC timer is reliable in all C-states
[ 0.989347] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.989349] ACPI: Thermal Zone [THM0] (55 C)
[ 0.990227] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.990229] ACPI: Thermal Zone [THM1] (27 C)
[ 0.990327] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.990750] Linux agpgart interface v0.103
[ 0.990781] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 0.990782] AMD-Vi: AMD IOMMUv2 functionality not available on this system
[ 0.990976] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.992487] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.992491] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.992572] mousedev: PS/2 mouse device common for all mice
[ 0.992605] rtc_cmos 00:03: RTC can wake from S4
[ 0.992784] rtc_cmos 00:03: registered as rtc0
[ 0.992810] rtc_cmos 00:03: setting system clock to 2021-12-16T11:15:42 UTC (1639653342)
[ 0.992824] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.992832] intel_pstate: Intel P-state driver initializing
[ 0.993022] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.993225] NET: Registered protocol family 10
[ 0.993755] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.999381] Segment Routing with IPv6
[ 0.999401] mip6: Mobile IPv6
[ 0.999403] NET: Registered protocol family 17
[ 0.999448] mpls_gso: MPLS GSO support
[ 0.999658] microcode: sig=0x306a9, pf=0x10, revision=0x21
[ 0.999669] microcode: Microcode Update Driver: v2.2.
[ 0.999673] IPI shorthand broadcast: enabled
[ 0.999679] sched_clock: Marking stable (999138638, 469785)->(1004595395, -4986972)
[ 0.999746] registered taskstats version 1
[ 0.999748] Loading compiled-in X.509 certificates
[ 1.027794] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[ 1.027807] Loaded X.509 cert 'Debian Secure Boot Signer 2021 - linux: 4b6ef5abca669825178e052c84667ccbc0531f8c'
[ 1.027823] zswap: loaded using pool lzo/zbud
[ 1.027958] Key type ._fscrypt registered
[ 1.027959] Key type .fscrypt registered
[ 1.027960] Key type fscrypt-provisioning registered
[ 1.027990] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.028990] Freeing unused kernel image (initmem) memory: 2392K
[ 1.053211] Write protecting the kernel read-only data: 22528k
[ 1.053681] Freeing unused kernel image (text/rodata gap) memory: 2040K
[ 1.053798] Freeing unused kernel image (rodata/data gap) memory: 632K
[ 1.096959] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.096960] x86/mm: Checking user space page tables
[ 1.137309] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.137314] Run /init as init process
[ 1.137315] with arguments:
[ 1.137316] /init
[ 1.137316] with environment:
[ 1.137317] HOME=/
[ 1.137317] TERM=linux
[ 1.137318] BOOT_IMAGE=/vmlinuz-5.10.0-9-amd64
[ 1.233835] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:29/PNP0C09:00/PNP0C0E:00/input/input2
[ 1.249258] ACPI: Sleep Button [SLPB]
[ 1.249486] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:29/PNP0C09:00/PNP0C0D:00/input/input3
[ 1.249653] ACPI: Lid Switch [LID]
[ 1.249761] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 1.249855] ACPI: Power Button [PWRF]
[ 1.250726] battery: ACPI: Battery Slot [BAT0] (battery present)
[ 1.250856] battery: ACPI: Battery Slot [BAT1] (battery absent)
[ 1.257717] pps_core: LinuxPPS API ver. 1 registered
[ 1.257719] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 1.259251] PTP clock support registered
[ 1.274119] ACPI: bus type USB registered
[ 1.274147] usbcore: registered new interface driver usbfs
[ 1.274155] usbcore: registered new interface driver hub
[ 1.274166] usbcore: registered new device driver usb
[ 1.275680] e1000e: Intel(R) PRO/1000 Network Driver
[ 1.275681] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.275867] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 1.278833] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.279770] ehci-pci: EHCI PCI platform driver
[ 1.279924] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.279930] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.279943] ehci-pci 0000:00:1a.0: debug port 2
[ 1.283879] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.285635] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20200925/utaddress-204)
[ 1.285641] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.285644] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20200925/utaddress-204)
[ 1.285648] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.285648] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20200925/utaddress-204)
[ 1.285652] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.285652] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20200925/utaddress-204)
[ 1.285656] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.285656] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 1.286541] sdhci: Secure Digital Host Controller Interface driver
[ 1.286542] sdhci: Copyright(c) Pierre Ossman
[ 1.293985] ehci-pci 0000:00:1a.0: irq 19, io mem 0x8383f000
[ 1.301956] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 1.302134] i2c i2c-0: 2/2 memory slots populated (from DMI)
[ 1.302535] i2c i2c-0: Successfully instantiated SPD at 0x50
[ 1.303996] i2c i2c-0: Successfully instantiated SPD at 0x51
[ 1.305496] SCSI subsystem initialized
[ 1.311367] cryptd: max_cpu_qlen set to 1000
[ 1.318031] sdhci-pci 0000:01:00.0: SDHCI controller found [1180:e823] (rev 4)
[ 1.318248] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes
[ 1.324198] AVX version of gcm_enc/dec engaged.
[ 1.324200] AES CTR mode by8 optimization enabled
[ 1.328059] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.328135] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[ 1.328137] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.328139] usb usb1: Product: EHCI Host Controller
[ 1.328140] usb usb1: Manufacturer: Linux 5.10.0-9-amd64 ehci_hcd
[ 1.328141] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.328283] hub 1-0:1.0: USB hub found
[ 1.328293] hub 1-0:1.0: 3 ports detected
[ 1.328608] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.328614] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.328627] ehci-pci 0000:00:1d.0: debug port 2
[ 1.332549] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.332569] ehci-pci 0000:00:1d.0: irq 18, io mem 0x83840000
[ 1.340936] mmc0: SDHCI controller on PCI [0000:01:00.0] using DMA
[ 1.345129] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.345204] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[ 1.345206] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.345208] usb usb2: Product: EHCI Host Controller
[ 1.345209] usb usb2: Manufacturer: Linux 5.10.0-9-amd64 ehci_hcd
[ 1.345210] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.345370] hub 2-0:1.0: USB hub found
[ 1.345390] hub 2-0:1.0: 3 ports detected
[ 1.345540] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.345549] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 1.346550] libata version 3.00 loaded.
[ 1.346643] xhci_hcd 0000:00:14.0: hcc params 0x200071a1 hci version 0x100 quirks 0x000000000000b930
[ 1.346650] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.346816] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.346820] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 1.346824] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 1.346879] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[ 1.346881] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.346883] usb usb3: Product: xHCI Host Controller
[ 1.346884] usb usb3: Manufacturer: Linux 5.10.0-9-amd64 xhci-hcd
[ 1.346885] usb usb3: SerialNumber: 0000:00:14.0
[ 1.351368] ahci 0000:00:1f.2: version 3.0
[ 1.351568] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 1.351724] hub 3-0:1.0: USB hub found
[ 1.351742] hub 3-0:1.0: 4 ports detected
[ 1.351974] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
[ 1.351976] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.351978] usb usb4: Product: xHCI Host Controller
[ 1.351980] usb usb4: Manufacturer: Linux 5.10.0-9-amd64 xhci-hcd
[ 1.351981] usb usb4: SerialNumber: 0000:00:14.0
[ 1.352101] hub 4-0:1.0: USB hub found
[ 1.352117] hub 4-0:1.0: 4 ports detected
[ 1.361662] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl SATA mode
[ 1.361665] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst
[ 1.362335] scsi host0: ahci
[ 1.362587] scsi host1: ahci
[ 1.362792] scsi host2: ahci
[ 1.367777] scsi host3: ahci
[ 1.372975] scsi host4: ahci
[ 1.373509] scsi host5: ahci
[ 1.373553] ata1: SATA max UDMA/133 abar m2048@0x8383e000 port 0x8383e100 irq 31
[ 1.373556] ata2: SATA max UDMA/133 abar m2048@0x8383e000 port 0x8383e180 irq 31
[ 1.373558] ata3: SATA max UDMA/133 abar m2048@0x8383e000 port 0x8383e200 irq 31
[ 1.373560] ata4: DUMMY
[ 1.373561] ata5: DUMMY
[ 1.373562] ata6: DUMMY
[ 1.399064] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[ 1.426879] i915 0000:00:02.0: [drm] VT-d active for gfx access
[ 1.426881] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 1.426913] i915 0000:00:02.0: [drm] DMAR active, disabling use of stolen memory
[ 1.477973] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.496884] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 3c:97:0e:7b:c3:aa
[ 1.496887] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 1.496930] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
[ 1.498098] e1000e 0000:00:19.0 eno0: renamed from eth0
[ 1.530497] [drm] Initialized i915 1.6.0 20200917 for 0000:00:02.0 on minor 0
[ 1.530715] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.557767] acpi device:0d: registered as cooling_device5
[ 1.557811] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 1.581170] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.613196] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.687728] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.688596] ata1.00: supports DRM functions and may not be fully accessible
[ 1.688650] ata1.00: ATA-10: CT1000MX500SSD1, M3CR033, max UDMA/133
[ 1.688654] ata1.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 1.689655] ata1.00: supports DRM functions and may not be fully accessible
[ 1.690509] ata1.00: configured for UDMA/133
[ 1.700839] scsi 0:0:0:0: Direct-Access ATA CT1000MX500SSD1 033 PQ: 0 ANSI: 5
[ 1.741537] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 1.741541] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.741817] hub 1-1:1.0: USB hub found
[ 1.741881] hub 1-1:1.0: 6 ports detected
[ 1.771616] fbcon: i915drmfb (fb0) is primary device
[ 1.773537] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 1.773540] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.773872] hub 2-1:1.0: USB hub found
[ 1.774017] hub 2-1:1.0: 8 ports detected
[ 2.005182] tsc: Refined TSC clocksource calibration: 2893.426 MHz
[ 2.005198] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29b500ca33a, max_idle_ns: 440795203665 ns
[ 2.005239] clocksource: Switched to clocksource tsc
[ 2.015988] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.029182] usb 1-1.4: new full-speed USB device number 3 using ehci-pci
[ 2.138306] psmouse serio1: synaptics: queried max coordinates: x [..5768], y [..5062]
[ 2.149842] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=21e6, bcdDevice= 1.12
[ 2.149846] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.149848] usb 1-1.4: Product: BCM20702A0
[ 2.149851] usb 1-1.4: Manufacturer: Broadcom Corp
[ 2.149852] usb 1-1.4: SerialNumber: 9C2A70849024
[ 2.169341] psmouse serio1: synaptics: queried min coordinates: x [1174..], y [790..]
[ 2.229183] usb 1-1.6: new high-speed USB device number 4 using ehci-pci
[ 2.230467] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd002a3/0x940300/0x123800/0x0, board id: 1611, fw id: 1099905
[ 2.230481] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[ 2.269342] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[ 2.332123] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.349460] usb 1-1.6: New USB device found, idVendor=04f2, idProduct=b2ea, bcdDevice= 5.18
[ 2.349464] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.349466] usb 1-1.6: Product: Integrated Camera
[ 2.349468] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd.
[ 2.568980] i915 0000:00:02.0: [drm] *ERROR* uncleared fifo underrun on pipe A
[ 2.568983] i915 0000:00:02.0: [drm] *ERROR* CPU pipe A FIFO underrun
[ 2.569101] i915 0000:00:02.0: [drm] *ERROR* uncleared pch fifo underrun on pch transcoder A
[ 2.569106] i915 0000:00:02.0: [drm] *ERROR* PCH transcoder A FIFO underrun
[ 2.585335] Console: switching to colour frame buffer device 170x48
[ 2.608129] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[ 2.635708] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 2.635713] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 2.635727] sd 0:0:0:0: [sda] Write Protect is off
[ 2.635730] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.635752] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.655750] sda: sda1 sda2 < sda5 >
[ 2.697415] sd 0:0:0:0: [sda] supports TCG Opal
[ 2.697419] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.862604] device-mapper: uevent: version 1.0.3
[ 2.862689] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com
[ 2.920729] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 3.122113] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input7
[ 8.167065] PM: Image not found (code -22)
[ 8.271177] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[ 8.316744] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[ 8.439937] systemd[1]: Inserted module 'autofs4'
[ 8.457837] systemd[1]: systemd 247.3-6 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
[ 8.477425] systemd[1]: Detected architecture x86-64.
[ 8.478248] systemd[1]: Set hostname to <black>.
[ 8.839958] systemd[1]: /lib/systemd/system/plymouth-start.service:16: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
[ 8.864835] systemd[1]: Queued start job for default target Graphical Interface.
[ 8.894316] systemd[1]: Created slice system-getty.slice.
[ 8.894645] systemd[1]: Created slice system-modprobe.slice.
[ 8.894913] systemd[1]: Created slice Cryptsetup Units Slice.
[ 8.895153] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 8.895390] systemd[1]: Created slice system-tor.slice.
[ 8.895600] systemd[1]: Created slice User and Session Slice.
[ 8.895732] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 8.895890] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 8.895954] systemd[1]: Reached target User and Group Name Lookups.
[ 8.895967] systemd[1]: Reached target Remote File Systems.
[ 8.895977] systemd[1]: Reached target Slices.
[ 8.896057] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 8.896162] systemd[1]: Listening on LVM2 poll daemon socket.
[ 8.896242] systemd[1]: Listening on Syslog Socket.
[ 8.896322] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 8.896367] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 8.896507] systemd[1]: Listening on Journal Audit Socket.
[ 8.896584] systemd[1]: Listening on Journal Socket (/dev/log).
[ 8.896678] systemd[1]: Listening on Journal Socket.
[ 8.897005] systemd[1]: Listening on udev Control Socket.
[ 8.897086] systemd[1]: Listening on udev Kernel Socket.
[ 8.897791] systemd[1]: Mounting Huge Pages File System...
[ 8.898491] systemd[1]: Mounting POSIX Message Queue File System...
[ 8.899427] systemd[1]: Mounting Kernel Debug File System...
[ 8.900478] systemd[1]: Mounting Kernel Trace File System...
[ 8.900705] systemd[1]: Finished Availability of block devices.
[ 8.901860] systemd[1]: Starting Set the console keyboard layout...
[ 8.902772] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 8.903560] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ 8.904583] systemd[1]: Starting Load Kernel Module configfs...
[ 8.905620] systemd[1]: Starting Load Kernel Module drm...
[ 8.906655] systemd[1]: Starting Load Kernel Module fuse...
[ 8.907645] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 8.907709] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 8.909775] systemd[1]: Starting Journal Service...
[ 8.912812] systemd[1]: Starting Load Kernel Modules...
[ 8.913782] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 8.914733] systemd[1]: Starting Coldplug All udev Devices...
[ 8.916896] systemd[1]: Mounted Huge Pages File System.
[ 8.917048] systemd[1]: Mounted POSIX Message Queue File System.
[ 8.917177] systemd[1]: Mounted Kernel Debug File System.
[ 8.917297] systemd[1]: Mounted Kernel Trace File System.
[ 8.917982] systemd[1]: Finished Set the console keyboard layout.
[ 8.918473] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 8.918825] systemd[1]: modprobe@configfs.service: Succeeded.
[ 8.919083] systemd[1]: Finished Load Kernel Module configfs.
[ 8.919367] systemd[1]: modprobe@drm.service: Succeeded.
[ 8.919584] systemd[1]: Finished Load Kernel Module drm.
[ 8.921188] systemd[1]: Mounting Kernel Configuration File System...
[ 8.922926] fuse: init (API version 7.32)
[ 8.923653] systemd[1]: modprobe@fuse.service: Succeeded.
[ 8.923825] systemd[1]: Finished Load Kernel Module fuse.
[ 8.923960] systemd[1]: Mounted Kernel Configuration File System.
[ 8.924817] systemd[1]: Mounting FUSE Control File System...
[ 8.927356] systemd[1]: Mounted FUSE Control File System.
[ 8.930915] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro
[ 8.932924] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 8.933486] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 8.933522] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[ 8.934260] systemd[1]: Starting Load/Save Random Seed...
[ 8.935203] systemd[1]: Starting Create System Users...
[ 8.935827] systemd[1]: Finished Load Kernel Modules.
[ 8.937028] systemd[1]: Starting Apply Kernel Variables...
[ 8.948427] systemd[1]: Finished Apply Kernel Variables.
[ 8.953513] systemd[1]: Finished Load/Save Random Seed.
[ 8.954046] systemd[1]: Finished Create System Users.
[ 8.954261] systemd[1]: Condition check resulted in First Boot Complete being skipped.
[ 8.955316] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 8.970156] systemd[1]: Finished Create Static Device Nodes in /dev.
[ 8.972144] systemd[1]: Starting Rule-based Manager for Device Events and Files...
[ 8.974431] systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
[ 8.974715] systemd[1]: Reached target Local File Systems (Pre).
[ 9.003817] systemd[1]: Started Journal Service.
[ 9.010219] systemd-journald[425]: Received client request to flush runtime journal.
[ 9.174021] ACPI: AC Adapter [AC] (on-line)
[ 9.249607] at24 0-0050: supply vcc not found, using dummy regulator
[ 9.249894] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 9.250234] at24 0-0050: 256 byte spd EEPROM, read-only
[ 9.250266] at24 0-0051: supply vcc not found, using dummy regulator
[ 9.250862] at24 0-0051: 256 byte spd EEPROM, read-only
[ 9.285697] iTCO_vendor_support: vendor-support=0
[ 9.296313] mc: Linux media interface: v0.10
[ 9.305070] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 9.305383] cfg80211: Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf'
[ 9.305662] cfg80211: Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
[ 9.305982] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 9.307653] platform regulatory.0: firmware: direct-loading firmware regulatory.db
[ 9.308521] platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s
[ 9.314675] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 9.342328] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 9.342386] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560)
[ 9.343627] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 9.345484] Non-volatile memory driver v1.3
[ 9.349222] tpm_tis 00:06: 1.2 TPM (device-id 0x0, rev-id 78)
[ 9.353852] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[ 9.371824] videodev: Linux video capture interface: v2.00
[ 9.377453] thinkpad_acpi: ThinkPad ACPI Extras v0.26
[ 9.377455] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 9.377456] thinkpad_acpi: ThinkPad BIOS CBET4000 4.15-543-g74d2218cc7, EC G2HT35WW-3.22
[ 9.377457] thinkpad_acpi: Lenovo ThinkPad X230, model 2325QL5
[ 9.382632] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 9.382634] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 9.382635] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 9.382636] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ 9.406393] thinkpad_acpi: radio switch found; radios are enabled
[ 9.406936] thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode
[ 9.406948] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 9.406948] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 9.410617] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[ 9.415669] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 9.430613] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 9.443459] thinkpad_acpi: battery 1 registered (start 0, stop 100)
[ 9.443466] battery: new extension: ThinkPad Battery Extension
[ 9.443513] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input9
[ 9.461676] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b2ea)
[ 9.479215] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input10
[ 9.479323] usbcore: registered new interface driver uvcvideo
[ 9.479324] USB Video Class driver (1.1.1)
[ 9.532570] ath: phy0: ASPM enabled: 0x43
[ 9.532575] ath: EEPROM regdomain: 0x60
[ 9.532577] ath: EEPROM indicates we should expect a direct regpair map
[ 9.532579] ath: Country alpha2 being used: 00
[ 9.532579] ath: Regpair used: 0x60
[ 9.534491] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 9.534806] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffb3ca40530000, irq=17
[ 9.589477] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[ 9.596650] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[ 9.596663] ext2 filesystem being mounted at /boot supports timestamps until 2038 (0x7fffffff)
[ 9.628734] Adding 999420k swap on /dev/mapper/black--vg-swap_1. Priority:-2 extents:1 across:999420k SSFS
[ 9.643263] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 9.644195] Bluetooth: Core ver 2.22
[ 9.644216] NET: Registered protocol family 31
[ 9.644217] Bluetooth: HCI device and connection manager initialized
[ 9.644221] Bluetooth: HCI socket layer initialized
[ 9.644223] Bluetooth: L2CAP socket layer initialized
[ 9.644232] Bluetooth: SCO socket layer initialized
[ 9.653177] ath9k 0000:02:00.0 wlp2s0: renamed from wlan0
[ 9.662533] audit: type=1400 audit(1639653351.164:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=564 comm="apparmor_parser"
[ 9.662538] audit: type=1400 audit(1639653351.164:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=564 comm="apparmor_parser"
[ 9.676282] audit: type=1400 audit(1639653351.176:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="system_tor" pid=563 comm="apparmor_parser"
[ 9.676692] usbcore: registered new interface driver btusb
[ 9.686136] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 9.686140] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 9.686142] snd_hda_codec_realtek hdaudioC0D0: hp_outs=2 (0x15/0x1b/0x0/0x0/0x0)
[ 9.686144] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 9.686145] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 9.686146] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 9.686148] snd_hda_codec_realtek hdaudioC0D0: Dock Mic=0x19
[ 9.686149] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 9.691544] audit: type=1400 audit(1639653351.192:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=569 comm="apparmor_parser"
[ 9.712113] audit: type=1400 audit(1639653351.212:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=577 comm="apparmor_parser"
[ 9.712118] audit: type=1400 audit(1639653351.212:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=577 comm="apparmor_parser"
[ 9.712120] audit: type=1400 audit(1639653351.212:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=577 comm="apparmor_parser"
[ 9.727157] intel_rapl_common: Found RAPL domain package
[ 9.727158] intel_rapl_common: Found RAPL domain core
[ 9.727159] intel_rapl_common: Found RAPL domain uncore
[ 9.739213] audit: type=1400 audit(1639653351.240:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=588 comm="apparmor_parser"
[ 9.743066] usb 1-1.4: USB disconnect, device number 3
[ 9.749265] audit: type=1400 audit(1639653351.252:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=580 comm="apparmor_parser"
[ 9.774961] audit: type=1400 audit(1639653351.276:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=565 comm="apparmor_parser"
[ 9.775287] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 9.775340] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 9.775393] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 9.775446] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 9.775498] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 9.775555] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 9.775604] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 9.775656] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[ 9.969965] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 9.969968] Bluetooth: BNEP filters: protocol multicast
[ 9.969971] Bluetooth: BNEP socket layer initialized
[ 11.353113] mei_me 0000:00:16.0: wait hw ready failed
[ 11.353121] mei_me 0000:00:16.0: hw_start failed ret = -62
[ 11.353139] mei_me 0000:00:16.0: H_RST is set = 0x80000015
[ 11.701128] Bluetooth: hci0: command 0x0c03 tx timeout
[ 12.698151] wlp2s0: authenticate with 60:14:66:ff:9f:1a
[ 12.717995] wlp2s0: send auth to 60:14:66:ff:9f:1a (try 1/3)
[ 12.720689] wlp2s0: authenticated
[ 12.721121] wlp2s0: associate with 60:14:66:ff:9f:1a (try 1/3)
[ 12.728090] wlp2s0: RX AssocResp from 60:14:66:ff:9f:1a (capab=0x411 status=0 aid=2)
[ 12.728294] wlp2s0: associated
[ 12.728451] ath: EEPROM regdomain: 0x8028
[ 12.728453] ath: EEPROM indicates we should expect a country code
[ 12.728454] ath: doing EEPROM country->regdmn map search
[ 12.728464] ath: country maps to regdmn code: 0x37
[ 12.728465] ath: Country alpha2 being used: AT
[ 12.728465] ath: Regpair used: 0x37
[ 12.728467] ath: regdomain 0x8028 dynamically updated by country element
[ 12.751781] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 13.365127] mei_me 0000:00:16.0: wait hw ready failed
[ 13.365134] mei_me 0000:00:16.0: hw_start failed ret = -62
[ 13.365153] mei_me 0000:00:16.0: H_RST is set = 0x80000015
[ 13.580216] rfkill: input handler disabled
[ 15.381196] mei_me 0000:00:16.0: wait hw ready failed
[ 15.381211] mei_me 0000:00:16.0: hw_start failed ret = -62
[ 15.381222] mei_me 0000:00:16.0: reset: reached maximal consecutive resets: disabling the device
[ 15.381227] mei_me 0000:00:16.0: reset failed ret = -19
[ 15.381230] mei_me 0000:00:16.0: link layer initialization failed.
[ 15.381233] mei_me 0000:00:16.0: init hw failure.
[ 15.381379] mei_me 0000:00:16.0: initialization failed.
[ 16.795673] kauditd_printk_skb: 7 callbacks suppressed
[ 16.795674] audit: type=1400 audit(1639653358.296:19): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=1156 comm="apparmor_parser"
[ 16.873336] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 16.874861] Bridge firewalling registered
[ 16.989858] Initializing XFRM netlink socket
[ 17.640302] rfkill: input handler enabled
[ 19.733112] Bluetooth: hci0: BCM: Reset failed (-110)
[ 19.824884] rfkill: input handler disabled