| [ 0.000000] Linux version 4.19.86-gentoo (root@nobby) (gcc version 9.2.0 (Gentoo Hardened 9.2.0-r2 p3)) #1 SMP Wed Dec 4 13:33:22 CET 2019 |
| [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.19.86-gentoo root=/dev/mapper/vg_main-gentoo ro quiet dolvm crypt_root=/dev/sda2 root_trim=yes acpi_backlight=video thinkpad-acpi.fan_control=1 ath9k.blink=1 ath9k.nohwcrypt=1 |
| [ 0.000000] x86/fpu: x87 FPU will use FXSAVE |
| [ 0.000000] BIOS-provided physical RAM map: |
| [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf743fff] usable |
| [ 0.000000] BIOS-e820: [mem 0x00000000bf744000-0x00000000bfffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000c1c00000-0x00000000c3ffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000d0000000-0x00000000efffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fedfffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001fbffffff] usable |
| [ 0.000000] BIOS-e820: [mem 0x00000001fc000000-0x00000001ffffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000200000000-0x0000000237ffffff] usable |
| [ 0.000000] NX (Execute Disable) protection: active |
| [ 0.000000] SMBIOS 2.8 present. |
| [ 0.000000] DMI: LENOVO 3626F7U/3626F7U, BIOS CBET4000 4.11-dirty 11/19/2019 |
| [ 0.000000] tsc: Fast TSC calibration using PIT |
| [ 0.000000] tsc: Detected 2527.010 MHz processor |
| [ 0.002171] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| [ 0.002173] e820: remove [mem 0x000a0000-0x000fffff] usable |
| [ 0.002178] last_pfn = 0x238000 max_arch_pfn = 0x400000000 |
| [ 0.002181] MTRR default type: write-back |
| [ 0.002181] MTRR fixed ranges enabled: |
| [ 0.002182] 00000-9FFFF write-back |
| [ 0.002183] A0000-BFFFF uncachable |
| [ 0.002184] C0000-FFFFF write-back |
| [ 0.002184] MTRR variable ranges enabled: |
| [ 0.002185] 0 base 0BF800000 mask FFF800000 uncachable |
| [ 0.002186] 1 base 0C0000000 mask FF0000000 uncachable |
| [ 0.002187] 2 base 0D0000000 mask FF0000000 write-combining |
| [ 0.002188] 3 base 0E0000000 mask FE0000000 uncachable |
| [ 0.002188] 4 disabled |
| [ 0.002188] 5 disabled |
| [ 0.002189] 6 disabled |
| [ 0.002189] 7 disabled |
| [ 0.002930] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT |
| [ 0.003016] last_pfn = 0xbf744 max_arch_pfn = 0x400000000 |
| [ 0.003033] BRK [0x02801000, 0x02801fff] PGTABLE |
| [ 0.003036] BRK [0x02802000, 0x02802fff] PGTABLE |
| [ 0.003037] BRK [0x02803000, 0x02803fff] PGTABLE |
| [ 0.003083] BRK [0x02804000, 0x02804fff] PGTABLE |
| [ 0.003324] BRK [0x02805000, 0x02805fff] PGTABLE |
| [ 0.003331] BRK [0x02806000, 0x02806fff] PGTABLE |
| [ 0.003386] RAMDISK: [mem 0x3780c000-0x37bfdfff] |
| [ 0.003391] ACPI: Early table checksum verification disabled |
| [ 0.003454] ACPI: RSDP 0x00000000000F6250 000024 (v02 COREv4) |
| [ 0.003458] ACPI: XSDT 0x00000000BF7580E0 000054 (v01 COREv4 COREBOOT 00000000 CORE 20190703) |
| [ 0.003464] ACPI: FACP 0x00000000BF75BDF0 0000F4 (v04 COREv4 COREBOOT 00000000 CORE 20190703) |
| [ 0.003469] ACPI: DSDT 0x00000000BF758280 003B6F (v02 COREv4 COREBOOT 20130325 INTL 20190703) |
| [ 0.003472] ACPI: FACS 0x00000000BF758240 000040 |
| [ 0.003474] ACPI: FACS 0x00000000BF758240 000040 |
| [ 0.003476] ACPI: SSDT 0x00000000BF75BEF0 00157B (v02 COREv4 COREBOOT 0000002A CORE 20190703) |
| [ 0.003479] ACPI: MCFG 0x00000000BF75D470 00003C (v01 COREv4 COREBOOT 00000000 CORE 20190703) |
| [ 0.003482] ACPI: TCPA 0x00000000BF75D4B0 000032 (v02 COREv4 COREBOOT 00000000 CORE 20190703) |
| [ 0.003485] ACPI: APIC 0x00000000BF75D4F0 000084 (v02 COREv4 COREBOOT 00000000 CORE 20190703) |
| [ 0.003488] ACPI: HPET 0x00000000BF75F580 000038 (v01 COREv4 COREBOOT 00000000 CORE 20190703) |
| [ 0.003497] ACPI: Local APIC address 0xfee00000 |
| [ 0.003517] Zone ranges: |
| [ 0.003517] DMA [mem 0x0000000000001000-0x0000000000ffffff] |
| [ 0.003519] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] |
| [ 0.003520] Normal [mem 0x0000000100000000-0x0000000237ffffff] |
| [ 0.003521] Movable zone start for each node |
| [ 0.003521] Early memory node ranges |
| [ 0.003522] node 0: [mem 0x0000000000001000-0x000000000009efff] |
| [ 0.003522] node 0: [mem 0x0000000000100000-0x00000000bf743fff] |
| [ 0.003523] node 0: [mem 0x0000000100000000-0x00000001fbffffff] |
| [ 0.003523] node 0: [mem 0x0000000200000000-0x0000000237ffffff] |
| [ 0.003527] Reserved but unavailable: 98 pages |
| [ 0.003528] Initmem setup node 0 [mem 0x0000000000001000-0x0000000237ffffff] |
| [ 0.003530] On node 0 totalpages: 2045666 |
| [ 0.003531] DMA zone: 64 pages used for memmap |
| [ 0.003531] DMA zone: 21 pages reserved |
| [ 0.003532] DMA zone: 3998 pages, LIFO batch:0 |
| [ 0.003607] DMA32 zone: 12190 pages used for memmap |
| [ 0.003608] DMA32 zone: 780100 pages, LIFO batch:63 |
| [ 0.018596] Normal zone: 19968 pages used for memmap |
| [ 0.018598] Normal zone: 1261568 pages, LIFO batch:63 |
| [ 0.041714] Reserving Intel graphics memory at [mem 0xc2000000-0xc3ffffff] |
| [ 0.041856] ACPI: PM-Timer IO Port: 0x508 |
| [ 0.041858] ACPI: Local APIC address 0xfee00000 |
| [ 0.041865] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) |
| [ 0.041866] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) |
| [ 0.041866] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) |
| [ 0.041867] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) |
| [ 0.041880] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 |
| [ 0.041882] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) |
| [ 0.041884] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) |
| [ 0.041885] ACPI: IRQ0 used by override. |
| [ 0.041886] ACPI: IRQ9 used by override. |
| [ 0.041888] Using ACPI (MADT) for SMP configuration information |
| [ 0.041889] ACPI: HPET id: 0x8086a701 base: 0xfed00000 |
| [ 0.041895] smpboot: Allowing 4 CPUs, 0 hotplug CPUs |
| [ 0.041908] [mem 0xf0000000-0xfecfffff] available for PCI devices |
| [ 0.041912] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns |
| [ 0.225344] random: get_random_bytes called from start_kernel+0x88/0x469 with crng_init=0 |
| [ 0.225354] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 |
| [ 0.225750] percpu: Embedded 41 pages/cpu s128536 r8192 d31208 u524288 |
| [ 0.225757] pcpu-alloc: s128536 r8192 d31208 u524288 alloc=1*2097152 |
| [ 0.225758] pcpu-alloc: [0] 0 1 2 3 |
| [ 0.225778] Built 1 zonelists, mobility grouping on. Total pages: 2013423 |
| [ 0.225780] Kernel command line: BOOT_IMAGE=/vmlinuz-4.19.86-gentoo root=/dev/mapper/vg_main-gentoo ro quiet dolvm crypt_root=/dev/sda2 root_trim=yes acpi_backlight=video thinkpad-acpi.fan_control=1 ath9k.blink=1 ath9k.nohwcrypt=1 |
| [ 0.227190] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) |
| [ 0.227825] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) |
| [ 0.269292] Memory: 7945900K/8182664K available (12296K kernel code, 530K rwdata, 2672K rodata, 908K init, 1352K bss, 236764K reserved, 0K cma-reserved) |
| [ 0.269338] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 |
| [ 0.269343] Kernel/User page tables isolation: enabled |
| [ 0.269427] rcu: Hierarchical RCU implementation. |
| [ 0.269441] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 |
| [ 0.272070] Console: colour VGA+ 80x25 |
| [ 0.272075] console [tty0] enabled |
| [ 0.272080] ACPI: Core revision 20180810 |
| [ 0.272231] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns |
| [ 0.272243] hpet clockevent registered |
| [ 0.272249] APIC: Switch to symmetric I/O mode setup |
| [ 0.272760] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 |
| [ 0.277247] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x246ce5136c6, max_idle_ns: 440795238417 ns |
| [ 0.277261] Calibrating delay loop (skipped), value calculated using timer frequency.. 5054.02 BogoMIPS (lpj=2527010) |
| [ 0.277263] pid_max: default: 32768 minimum: 301 |
| [ 0.277312] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) |
| [ 0.277339] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) |
| [ 0.277504] CPU0: Thermal monitoring enabled (TM1) |
| [ 0.277512] process: using mwait in idle threads |
| [ 0.277515] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7 |
| [ 0.277516] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 |
| [ 0.277518] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization |
| [ 0.277520] Spectre V2 : Mitigation: Full generic retpoline |
| [ 0.277521] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch |
| [ 0.277521] Spectre V2 : Enabling Restricted Speculation for firmware calls |
| [ 0.277526] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier |
| [ 0.277527] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl |
| [ 0.277529] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp |
| [ 0.277542] MDS: Vulnerable: Clear CPU buffers attempted, no microcode |
| [ 0.277720] Freeing SMP alternatives memory: 32K |
| [ 0.379911] smpboot: CPU0: Intel(R) Core(TM) i5 CPU M 540 @ 2.53GHz (family: 0x6, model: 0x25, stepping: 0x2) |
| [ 0.380002] Performance Events: PEBS fmt1+, Westmere events, 16-deep LBR, Intel PMU driver. |
| [ 0.380021] core: CPUID marked event: 'bus cycles' unavailable |
| [ 0.380024] ... version: 3 |
| [ 0.380024] ... bit width: 48 |
| [ 0.380025] ... generic registers: 4 |
| [ 0.380026] ... value mask: 0000ffffffffffff |
| [ 0.380026] ... max period: 000000007fffffff |
| [ 0.380027] ... fixed-purpose events: 3 |
| [ 0.380027] ... event mask: 000000070000000f |
| [ 0.380065] rcu: Hierarchical SRCU implementation. |
| [ 0.380166] smp: Bringing up secondary CPUs ... |
| [ 0.380233] x86: Booting SMP configuration: |
| [ 0.380233] .... node #0, CPUs: #1 |
| [ 0.380365] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. |
| [ 0.381359] #2 #3 |
| [ 0.383281] smp: Brought up 1 node, 4 CPUs |
| [ 0.383281] smpboot: Max logical packages: 1 |
| [ 0.383281] smpboot: Total of 4 processors activated (20216.08 BogoMIPS) |
| [ 0.384530] devtmpfs: initialized |
| [ 0.385393] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns |
| [ 0.385393] futex hash table entries: 1024 (order: 4, 65536 bytes) |
| [ 0.385522] NET: Registered protocol family 16 |
| [ 0.385746] cpuidle: using governor menu |
| [ 0.385746] ACPI: bus type PCI registered |
| [ 0.385746] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) |
| [ 0.385746] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 |
| [ 0.385746] PCI: Using configuration type 1 for base access |
| [ 0.389429] cryptd: max_cpu_qlen set to 1000 |
| [ 0.389429] ACPI: Added _OSI(Module Device) |
| [ 0.389429] ACPI: Added _OSI(Processor Device) |
| [ 0.389429] ACPI: Added _OSI(3.0 _SCP Extensions) |
| [ 0.389429] ACPI: Added _OSI(Processor Aggregator Device) |
| [ 0.389429] ACPI: Added _OSI(Linux-Dell-Video) |
| [ 0.389429] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) |
| [ 0.392522] ACPI: 2 ACPI AML tables successfully acquired and loaded |
| [ 0.393551] ACPI: EC: EC started |
| [ 0.393552] ACPI: EC: interrupt blocked |
| [ 0.394144] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC |
| [ 0.394146] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62 |
| [ 0.394148] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions |
| [ 0.394148] ACPI: Interpreter enabled |
| [ 0.394166] ACPI: (supports S0 S3 S5) |
| [ 0.394167] ACPI: Using IOAPIC for interrupt routing |
| [ 0.394189] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| [ 0.394324] ACPI: Enabled 2 GPEs in block 00 to 3F |
| [ 0.399153] acpi ACPI0003:01: ACPI dock station (docks/bays count: 1) |
| [ 0.399223] ACPI: Power Resource [FPWR] (off) |
| [ 0.399544] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) |
| [ 0.399548] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] |
| [ 0.399595] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability LTR] |
| [ 0.399675] PCI host bridge to bus 0000:00 |
| [ 0.399678] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] |
| [ 0.399679] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] |
| [ 0.399681] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] |
| [ 0.399682] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] |
| [ 0.399683] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] |
| [ 0.399684] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] |
| [ 0.399685] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window] |
| [ 0.399686] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] |
| [ 0.399687] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] |
| [ 0.399688] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] |
| [ 0.399689] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] |
| [ 0.399690] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] |
| [ 0.399692] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] |
| [ 0.399693] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window] |
| [ 0.399694] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window] |
| [ 0.399695] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window] |
| [ 0.399696] pci_bus 0000:00: root bus resource [mem 0xc4000000-0xfebfffff window] |
| [ 0.399697] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] |
| [ 0.399699] pci_bus 0000:00: root bus resource [bus 00-ff] |
| [ 0.399708] pci 0000:00:00.0: [8086:0044] type 00 class 0x060000 |
| [ 0.399799] pci 0000:00:02.0: [8086:0046] type 00 class 0x030000 |
| [ 0.399809] pci 0000:00:02.0: reg 0x10: [mem 0xcf800000-0xcfbfffff 64bit] |
| [ 0.399815] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref] |
| [ 0.399819] pci 0000:00:02.0: reg 0x20: [io 0x1840-0x1847] |
| [ 0.399917] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000 |
| [ 0.399948] pci 0000:00:16.0: reg 0x10: [mem 0xcfd2a000-0xcfd2a00f 64bit] |
| [ 0.400035] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold |
| [ 0.400110] pci 0000:00:19.0: [8086:10ea] type 00 class 0x020000 |
| [ 0.400130] pci 0000:00:19.0: reg 0x10: [mem 0xcfd00000-0xcfd1ffff] |
| [ 0.400137] pci 0000:00:19.0: reg 0x14: [mem 0xcfd24000-0xcfd24fff] |
| [ 0.400144] pci 0000:00:19.0: reg 0x18: [io 0x1800-0x181f] |
| [ 0.400201] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold |
| [ 0.400270] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320 |
| [ 0.400292] pci 0000:00:1a.0: reg 0x10: [mem 0xcfd27000-0xcfd273ff] |
| [ 0.400370] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold |
| [ 0.400442] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300 |
| [ 0.400462] pci 0000:00:1b.0: reg 0x10: [mem 0xcfd20000-0xcfd23fff 64bit] |
| [ 0.400530] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold |
| [ 0.400592] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400 |
| [ 0.400658] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold |
| [ 0.400728] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400 |
| [ 0.400793] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold |
| [ 0.400862] pci 0000:00:1c.3: [8086:3b48] type 01 class 0x060400 |
| [ 0.400926] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold |
| [ 0.400996] pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400 |
| [ 0.401065] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold |
| [ 0.401143] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320 |
| [ 0.401164] pci 0000:00:1d.0: reg 0x10: [mem 0xcfd28000-0xcfd283ff] |
| [ 0.401240] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold |
| [ 0.401310] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401 |
| [ 0.401405] pci 0000:00:1f.0: [8086:3b07] type 00 class 0x060100 |
| [ 0.401565] pci 0000:00:1f.2: [8086:3b2f] type 00 class 0x010601 |
| [ 0.401588] pci 0000:00:1f.2: reg 0x10: [io 0x1848-0x184f] |
| [ 0.401597] pci 0000:00:1f.2: reg 0x14: [io 0x1858-0x185b] |
| [ 0.401606] pci 0000:00:1f.2: reg 0x18: [io 0x1850-0x1857] |
| [ 0.401615] pci 0000:00:1f.2: reg 0x1c: [io 0x185c-0x185f] |
| [ 0.401624] pci 0000:00:1f.2: reg 0x20: [io 0x1820-0x183f] |
| [ 0.401633] pci 0000:00:1f.2: reg 0x24: [mem 0xcfd26000-0xcfd267ff] |
| [ 0.401685] pci 0000:00:1f.2: PME# supported from D3hot |
| [ 0.401752] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500 |
| [ 0.401770] pci 0000:00:1f.3: reg 0x10: [mem 0xcfd29000-0xcfd290ff 64bit] |
| [ 0.401789] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f] |
| [ 0.401865] pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000 |
| [ 0.401888] pci 0000:00:1f.6: reg 0x10: [mem 0xcfd25000-0xcfd25fff 64bit] |
| [ 0.402033] pci 0000:00:1c.0: PCI bridge to [bus 01] |
| [ 0.402075] pci 0000:00:1c.1: PCI bridge to [bus 02] |
| [ 0.402118] pci 0000:00:1c.3: PCI bridge to [bus 03] |
| [ 0.402173] pci 0000:04:00.0: [168c:002a] type 00 class 0x028000 |
| [ 0.402207] pci 0000:04:00.0: reg 0x10: [mem 0xcfc00000-0xcfc0ffff 64bit] |
| [ 0.402337] pci 0000:04:00.0: supports D1 |
| [ 0.402338] pci 0000:04:00.0: PME# supported from D0 D1 D3hot |
| [ 0.402395] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' |
| [ 0.402404] pci 0000:00:1c.4: PCI bridge to [bus 04] |
| [ 0.402409] pci 0000:00:1c.4: bridge window [mem 0xcfc00000-0xcfcfffff] |
| [ 0.402428] pci_bus 0000:05: extended config space not accessible |
| [ 0.402474] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode) |
| [ 0.402482] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) |
| [ 0.402484] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) |
| [ 0.402485] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) |
| [ 0.402486] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000c3fff window] (subtractive decode) |
| [ 0.402487] pci 0000:00:1e.0: bridge window [mem 0x000c4000-0x000c7fff window] (subtractive decode) |
| [ 0.402488] pci 0000:00:1e.0: bridge window [mem 0x000c8000-0x000cbfff window] (subtractive decode) |
| [ 0.402490] pci 0000:00:1e.0: bridge window [mem 0x000cc000-0x000cffff window] (subtractive decode) |
| [ 0.402491] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode) |
| [ 0.402492] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode) |
| [ 0.402493] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode) |
| [ 0.402494] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode) |
| [ 0.402496] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode) |
| [ 0.402497] pci 0000:00:1e.0: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode) |
| [ 0.402498] pci 0000:00:1e.0: bridge window [mem 0x000e8000-0x000ebfff window] (subtractive decode) |
| [ 0.402499] pci 0000:00:1e.0: bridge window [mem 0x000ec000-0x000effff window] (subtractive decode) |
| [ 0.402500] pci 0000:00:1e.0: bridge window [mem 0x000f0000-0x000fffff window] (subtractive decode) |
| [ 0.402502] pci 0000:00:1e.0: bridge window [mem 0xc4000000-0xfebfffff window] (subtractive decode) |
| [ 0.402503] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode) |
| [ 0.402526] pci_bus 0000:00: on NUMA node 0 |
| [ 0.402627] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.402674] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.402720] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.402766] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.402812] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.402857] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.402902] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.402948] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.403728] ACPI: PCI Root Bridge [UNCR] (domain 0000 [bus ff]) |
| [ 0.403731] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] |
| [ 0.403735] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM |
| [ 0.403760] PCI host bridge to bus 0000:ff |
| [ 0.403762] pci_bus 0000:ff: busn_res: can not insert [bus ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff]) |
| [ 0.403764] pci_bus 0000:ff: root bus resource [bus ff] |
| [ 0.403769] pci 0000:ff:00.0: [8086:2c62] type 00 class 0x060000 |
| [ 0.403811] pci 0000:ff:00.1: [8086:2d01] type 00 class 0x060000 |
| [ 0.403857] pci 0000:ff:02.0: [8086:2d10] type 00 class 0x060000 |
| [ 0.403895] pci 0000:ff:02.1: [8086:2d11] type 00 class 0x060000 |
| [ 0.403933] pci 0000:ff:02.2: [8086:2d12] type 00 class 0x060000 |
| [ 0.403973] pci 0000:ff:02.3: [8086:2d13] type 00 class 0x060000 |
| [ 0.404019] pci_bus 0000:ff: on NUMA node 0 |
| [ 0.404340] ACPI: EC: interrupt unblocked |
| [ 0.404348] ACPI: EC: event unblocked |
| [ 0.404353] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62 |
| [ 0.404355] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events |
| [ 0.404414] pci 0000:00:02.0: vgaarb: setting as boot VGA device |
| [ 0.404414] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none |
| [ 0.404414] pci 0000:00:02.0: vgaarb: bridge control possible |
| [ 0.404414] vgaarb: loaded |
| [ 0.404414] SCSI subsystem initialized |
| [ 0.404414] libata version 3.00 loaded. |
| [ 0.404414] ACPI: bus type USB registered |
| [ 0.404415] usbcore: registered new interface driver usbfs |
| [ 0.404426] usbcore: registered new interface driver hub |
| [ 0.404443] usbcore: registered new device driver usb |
| [ 0.404465] pps_core: LinuxPPS API ver. 1 registered |
| [ 0.404466] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> |
| [ 0.404470] PTP clock support registered |
| [ 0.404510] Advanced Linux Sound Architecture Driver Initialized. |
| [ 0.404523] PCI: Using ACPI for IRQ routing |
| [ 0.413276] PCI: pci_cache_line_size set to 64 bytes |
| [ 0.413330] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] |
| [ 0.413332] e820: reserve RAM buffer [mem 0xbf744000-0xbfffffff] |
| [ 0.413468] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 |
| [ 0.413468] hpet0: 8 comparators, 64-bit 14.318180 MHz counter |
| [ 0.415271] clocksource: Switched to clocksource tsc-early |
| [ 0.416993] pnp: PnP ACPI init |
| [ 0.417122] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved |
| [ 0.417124] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved |
| [ 0.417126] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved |
| [ 0.417128] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved |
| [ 0.417130] system 00:00: [mem 0xe0000000-0xe3ffffff] has been reserved |
| [ 0.417131] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved |
| [ 0.417133] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved |
| [ 0.417135] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved |
| [ 0.417137] system 00:00: [mem 0x20000000-0x201fffff] could not be reserved |
| [ 0.417139] system 00:00: [mem 0x40000000-0x401fffff] could not be reserved |
| [ 0.417146] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) |
| [ 0.417728] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved |
| [ 0.417736] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) |
| [ 0.417783] system 00:02: [io 0x0500-0x057f] has been reserved |
| [ 0.417786] system 00:02: [io 0x0480-0x04bf] has been reserved |
| [ 0.417792] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) |
| [ 0.417817] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) |
| [ 0.417856] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) |
| [ 0.417890] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active) |
| [ 0.417923] pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active) |
| [ 0.418075] pnp: PnP ACPI: found 7 devices |
| [ 0.422626] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns |
| [ 0.422663] pci 0000:00:1c.0: PCI bridge to [bus 01] |
| [ 0.422674] pci 0000:00:1c.1: PCI bridge to [bus 02] |
| [ 0.422683] pci 0000:00:1c.3: PCI bridge to [bus 03] |
| [ 0.422692] pci 0000:00:1c.4: PCI bridge to [bus 04] |
| [ 0.422697] pci 0000:00:1c.4: bridge window [mem 0xcfc00000-0xcfcfffff] |
| [ 0.422703] pci 0000:00:1e.0: PCI bridge to [bus 05] |
| [ 0.422713] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] |
| [ 0.422715] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] |
| [ 0.422717] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] |
| [ 0.422718] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] |
| [ 0.422719] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window] |
| [ 0.422720] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window] |
| [ 0.422722] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window] |
| [ 0.422723] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window] |
| [ 0.422724] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window] |
| [ 0.422725] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window] |
| [ 0.422726] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window] |
| [ 0.422727] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window] |
| [ 0.422728] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window] |
| [ 0.422730] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window] |
| [ 0.422731] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window] |
| [ 0.422732] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window] |
| [ 0.422733] pci_bus 0000:00: resource 20 [mem 0xc4000000-0xfebfffff window] |
| [ 0.422734] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff window] |
| [ 0.422736] pci_bus 0000:04: resource 1 [mem 0xcfc00000-0xcfcfffff] |
| [ 0.422737] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7 window] |
| [ 0.422738] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff window] |
| [ 0.422740] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window] |
| [ 0.422741] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000c3fff window] |
| [ 0.422742] pci_bus 0000:05: resource 8 [mem 0x000c4000-0x000c7fff window] |
| [ 0.422743] pci_bus 0000:05: resource 9 [mem 0x000c8000-0x000cbfff window] |
| [ 0.422744] pci_bus 0000:05: resource 10 [mem 0x000cc000-0x000cffff window] |
| [ 0.422745] pci_bus 0000:05: resource 11 [mem 0x000d0000-0x000d3fff window] |
| [ 0.422746] pci_bus 0000:05: resource 12 [mem 0x000d4000-0x000d7fff window] |
| [ 0.422747] pci_bus 0000:05: resource 13 [mem 0x000d8000-0x000dbfff window] |
| [ 0.422748] pci_bus 0000:05: resource 14 [mem 0x000dc000-0x000dffff window] |
| [ 0.422750] pci_bus 0000:05: resource 15 [mem 0x000e0000-0x000e3fff window] |
| [ 0.422751] pci_bus 0000:05: resource 16 [mem 0x000e4000-0x000e7fff window] |
| [ 0.422752] pci_bus 0000:05: resource 17 [mem 0x000e8000-0x000ebfff window] |
| [ 0.422753] pci_bus 0000:05: resource 18 [mem 0x000ec000-0x000effff window] |
| [ 0.422754] pci_bus 0000:05: resource 19 [mem 0x000f0000-0x000fffff window] |
| [ 0.422755] pci_bus 0000:05: resource 20 [mem 0xc4000000-0xfebfffff window] |
| [ 0.422756] pci_bus 0000:05: resource 21 [mem 0xfed40000-0xfed44fff window] |
| [ 0.422825] NET: Registered protocol family 2 |
| [ 0.422940] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes) |
| [ 0.422971] TCP established hash table entries: 65536 (order: 7, 524288 bytes) |
| [ 0.423137] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) |
| [ 0.423447] TCP: Hash tables configured (established 65536 bind 65536) |
| [ 0.423492] UDP hash table entries: 4096 (order: 5, 131072 bytes) |
| [ 0.423548] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) |
| [ 0.423635] NET: Registered protocol family 1 |
| [ 0.423752] RPC: Registered named UNIX socket transport module. |
| [ 0.423752] RPC: Registered udp transport module. |
| [ 0.423753] RPC: Registered tcp transport module. |
| [ 0.423754] RPC: Registered tcp NFSv4.1 backchannel transport module. |
| [ 0.423892] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] |
| [ 0.424240] PCI: CLS 64 bytes, default 64 |
| [ 0.424277] Unpacking initramfs... |
| [ 0.869427] Freeing initrd memory: 4040K |
| [ 0.869447] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) |
| [ 0.869449] software IO TLB: mapped [mem 0xbb744000-0xbf744000] (64MB) |
| [ 0.870349] Initialise system trusted keyrings |
| [ 0.870380] workingset: timestamp_bits=62 max_order=21 bucket_order=0 |
| [ 0.872340] NFS: Registering the id_resolver key type |
| [ 0.872347] Key type id_resolver registered |
| [ 0.872347] Key type id_legacy registered |
| [ 0.872392] SGI XFS with security attributes, no debug enabled |
| [ 0.873294] Key type asymmetric registered |
| [ 0.873296] Asymmetric key parser 'x509' registered |
| [ 0.873310] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) |
| [ 0.873312] io scheduler noop registered |
| [ 0.873337] io scheduler cfq registered (default) |
| [ 0.873625] pcieport 0000:00:1c.0: Signaling PME with IRQ 24 |
| [ 0.873801] pcieport 0000:00:1c.1: Signaling PME with IRQ 25 |
| [ 0.873961] pcieport 0000:00:1c.3: Signaling PME with IRQ 26 |
| [ 0.874113] pcieport 0000:00:1c.4: Signaling PME with IRQ 27 |
| [ 0.874213] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled |
| [ 0.874651] Non-volatile memory driver v1.3 |
| [ 0.874653] Linux agpgart interface v0.103 |
| [ 0.874737] intel_idle: MWAIT substates: 0x1120 |
| [ 0.874738] intel_idle: v0.4.1 model 0x25 |
| [ 0.874869] intel_idle: lapic_timer_reliable_states 0xffffffff |
| [ 0.875093] ACPI: AC Adapter [AC] (on-line) |
| [ 0.875161] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:21/PNP0C09:00/PNP0C0E:00/input/input0 |
| [ 0.875175] ACPI: Sleep Button [SLPB] |
| [ 0.875210] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:21/PNP0C09:00/PNP0C0D:00/input/input1 |
| [ 0.875215] ACPI: Lid Switch [LID] |
| [ 0.875253] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 |
| [ 0.875260] ACPI: Power Button [PWRF] |
| [ 0.877965] thermal LNXTHERM:00: registered as thermal_zone0 |
| [ 0.877967] ACPI: Thermal Zone [THM0] (40 C) |
| [ 0.879088] thermal LNXTHERM:01: registered as thermal_zone1 |
| [ 0.879089] ACPI: Thermal Zone [THM1] (27 C) |
| [ 0.879468] pci 0000:00:00.0: Intel HD Graphics Chipset |
| [ 0.879496] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable |
| [ 0.879975] pci 0000:00:00.0: detected 32768K stolen memory |
| [ 0.880075] [drm] Replacing VGA console driver |
| [ 0.880850] Console: switching to colour dummy device 80x25 |
| [ 0.891875] random: fast init done |
| [ 0.893284] battery: ACPI: Battery Slot [BAT0] (battery present) |
| [ 0.893453] battery: ACPI: Battery Slot [BAT1] (battery absent) |
| [ 0.933740] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). |
| [ 0.933741] [drm] Driver supports precise vblank timestamp query. |
| [ 0.934046] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem |
| [ 0.963310] [drm] RC6 disabled, disabling runtime PM support |
| [ 0.965232] [drm] Initialized i915 1.6.0 20180719 for 0000:00:02.0 on minor 0 |
| [ 0.965356] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) |
| [ 0.974442] acpi device:05: registered as cooling_device5 |
| [ 0.974496] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3 |
| [ 0.975867] loop: module loaded |
| [ 0.975970] ahci 0000:00:1f.2: version 3.0 |
| [ 0.976139] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled |
| [ 0.976163] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3 impl SATA mode |
| [ 0.976165] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst |
| [ 0.976610] scsi host0: ahci |
| [ 0.976785] scsi host1: ahci |
| [ 0.976890] scsi host2: ahci |
| [ 0.976958] scsi host3: ahci |
| [ 0.977032] scsi host4: ahci |
| [ 0.977109] scsi host5: ahci |
| [ 0.977148] ata1: SATA max UDMA/133 abar m2048@0xcfd26000 port 0xcfd26100 irq 29 |
| [ 0.977151] ata2: SATA max UDMA/133 abar m2048@0xcfd26000 port 0xcfd26180 irq 29 |
| [ 0.977152] ata3: DUMMY |
| [ 0.977153] ata4: DUMMY |
| [ 0.977153] ata5: DUMMY |
| [ 0.977154] ata6: DUMMY |
| [ 0.977193] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k |
| [ 0.977194] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. |
| [ 0.977324] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode |
| [ 0.991906] fbcon: inteldrmfb (fb0) is primary device |
| [ 1.133802] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:26:2d:fb:7f:aa |
| [ 1.133803] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection |
| [ 1.133864] e1000e 0000:00:19.0 eth0: MAC: 9, PHY: 10, PBA No: A002FF-0FF |
| [ 1.284887] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) |
| [ 1.286871] ata1.00: supports DRM functions and may not be fully accessible |
| [ 1.287260] ata1.00: NCQ Send/Recv Log not supported |
| [ 1.287261] ata1.00: ATA-9: Samsung SSD 840 EVO 250GB, EXT0BB6Q, max UDMA/133 |
| [ 1.287262] ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 32), AA |
| [ 1.287946] ata1.00: supports DRM functions and may not be fully accessible |
| [ 1.288296] ata1.00: NCQ Send/Recv Log not supported |
| [ 1.288792] ata1.00: configured for UDMA/133 |
| [ 1.564705] ath: EEPROM regdomain: 0x0 |
| [ 1.564706] ath: EEPROM indicates default country code should be used |
| [ 1.564707] ath: doing EEPROM country->regdmn map search |
| [ 1.564708] ath: country maps to regdmn code: 0x3a |
| [ 1.564709] ath: Country alpha2 being used: US |
| [ 1.564709] ath: Regpair used: 0x3a |
| [ 1.570774] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' |
| [ 1.570956] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 |
| [ 1.570957] cfg80211: failed to load regulatory.db |
| [ 1.570992] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xffffc90000460000, irq=16 |
| [ 1.571052] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| [ 1.571053] ehci-pci: EHCI PCI platform driver |
| [ 1.571171] ehci-pci 0000:00:1a.0: EHCI Host Controller |
| [ 1.571178] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 |
| [ 1.571191] ehci-pci 0000:00:1a.0: debug port 2 |
| [ 1.575131] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported |
| [ 1.575145] ehci-pci 0000:00:1a.0: irq 19, io mem 0xcfd27000 |
| [ 1.581308] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 |
| [ 1.581347] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 |
| [ 1.581349] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.581350] usb usb1: Product: EHCI Host Controller |
| [ 1.581351] usb usb1: Manufacturer: Linux 4.19.86-gentoo ehci_hcd |
| [ 1.581352] usb usb1: SerialNumber: 0000:00:1a.0 |
| [ 1.581515] hub 1-0:1.0: USB hub found |
| [ 1.581524] hub 1-0:1.0: 2 ports detected |
| [ 1.581720] ehci-pci 0000:00:1d.0: EHCI Host Controller |
| [ 1.581724] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 |
| [ 1.581736] ehci-pci 0000:00:1d.0: debug port 2 |
| [ 1.583069] Console: switching to colour frame buffer device 160x50 |
| [ 1.585631] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported |
| [ 1.585642] ehci-pci 0000:00:1d.0: irq 18, io mem 0xcfd28000 |
| [ 1.592350] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 |
| [ 1.592406] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 |
| [ 1.592409] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.592411] usb usb2: Product: EHCI Host Controller |
| [ 1.592414] usb usb2: Manufacturer: Linux 4.19.86-gentoo ehci_hcd |
| [ 1.592416] usb usb2: SerialNumber: 0000:00:1d.0 |
| [ 1.592697] hub 2-0:1.0: USB hub found |
| [ 1.592711] hub 2-0:1.0: 2 ports detected |
| [ 1.592839] usbcore: registered new interface driver usb-storage |
| [ 1.592870] usbcore: registered new interface driver usbserial_generic |
| [ 1.592893] usbserial: USB Serial support registered for generic |
| [ 1.592905] usbcore: registered new interface driver ftdi_sio |
| [ 1.592913] usbserial: USB Serial support registered for FTDI USB Serial Device |
| [ 1.592940] usbcore: registered new interface driver mct_u232 |
| [ 1.592948] usbserial: USB Serial support registered for MCT U232 |
| [ 1.592960] usbcore: registered new interface driver pl2303 |
| [ 1.592969] usbserial: USB Serial support registered for pl2303 |
| [ 1.593019] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 |
| [ 1.596324] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| [ 1.596329] serio: i8042 AUX port at 0x60,0x64 irq 12 |
| [ 1.596438] mousedev: PS/2 mouse device common for all mice |
| [ 1.596928] rtc_cmos 00:03: RTC can wake from S4 |
| [ 1.597126] rtc_cmos 00:03: registered as rtc0 |
| [ 1.597127] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs |
| [ 1.597269] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt |
| [ 1.599407] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device |
| [ 1.599557] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 BB6Q PQ: 0 ANSI: 5 |
| [ 1.599617] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com |
| [ 1.599700] usbcore: registered new interface driver usbhid |
| [ 1.599700] usbhid: USB HID core driver |
| [ 1.599774] sd 0:0:0:0: Attached scsi generic sg0 type 0 |
| [ 1.599824] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB) |
| [ 1.599831] thinkpad_acpi: ThinkPad ACPI Extras v0.26 |
| [ 1.599832] thinkpad_acpi: http://ibm-acpi.sf.net/ |
| [ 1.599833] thinkpad_acpi: ThinkPad BIOS CBET4000 4.11-dirty, EC 6QHT34WW-3.18 |
| [ 1.599834] thinkpad_acpi: Lenovo ThinkPad X201, model 3626F7U |
| [ 1.599836] sd 0:0:0:0: [sda] Write Protect is off |
| [ 1.599838] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 |
| [ 1.599869] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 1.600886] thinkpad_acpi: radio switch found; radios are enabled |
| [ 1.601029] thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode |
| [ 1.601040] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver |
| [ 1.601040] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... |
| [ 1.601771] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 |
| [ 1.602965] sda: sda1 sda2 |
| [ 1.603058] thinkpad_acpi: rfkill switch tpacpi_wwan_sw: radio is unblocked |
| [ 1.603403] sd 0:0:0:0: [sda] Attached SCSI disk |
| [ 1.605622] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one |
| [ 1.605623] thinkpad_acpi: volume: disabled as there is no ALSA support in this kernel |
| [ 1.609726] thinkpad_acpi: battery 1 registered (start 0, stop 100) |
| [ 1.609734] battery: new extension: ThinkPad Battery Extension |
| [ 1.609802] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input5 |
| [ 1.610817] usbcore: registered new interface driver snd-usb-audio |
| [ 1.611223] NET: Registered protocol family 10 |
| [ 1.611484] Segment Routing with IPv6 |
| [ 1.611502] NET: Registered protocol family 17 |
| [ 1.611514] 8021q: 802.1Q VLAN Support v1.8 |
| [ 1.611524] Key type dns_resolver registered |
| [ 1.611762] mce: Using 9 MCE banks |
| [ 1.611801] microcode: sig=0x20652, pf=0x10, revision=0x11 |
| [ 1.611843] microcode: Microcode Update Driver: v2.2. |
| [ 1.611861] SSE version of gcm_enc/dec engaged. |
| [ 1.612136] sched_clock: Marking stable (1609626006, 2505931)->(1617165075, -5033138) |
| [ 1.612300] registered taskstats version 1 |
| [ 1.612301] Loading compiled-in X.509 certificates |
| [ 1.612726] cfg80211: Loading compiled-in X.509 certificates for regulatory database |
| [ 1.613547] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' |
| [ 1.613551] ALSA device list: |
| [ 1.613552] No soundcards found. |
| [ 1.613856] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops 0xffffffff81e7b5a0) |
| [ 1.622827] snd_hda_codec_conexant hdaudioC0D0: CX20585: BIOS auto-probing. |
| [ 1.623322] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20585: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker |
| [ 1.623324] snd_hda_codec_conexant hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) |
| [ 1.623327] snd_hda_codec_conexant hdaudioC0D0: hp_outs=2 (0x1c/0x19/0x0/0x0/0x0) |
| [ 1.623329] snd_hda_codec_conexant hdaudioC0D0: mono: mono_out=0x0 |
| [ 1.623330] snd_hda_codec_conexant hdaudioC0D0: inputs: |
| [ 1.623333] snd_hda_codec_conexant hdaudioC0D0: Internal Mic=0x23 |
| [ 1.623335] snd_hda_codec_conexant hdaudioC0D0: Mic=0x1b |
| [ 1.623337] snd_hda_codec_conexant hdaudioC0D0: Dock Mic=0x1a |
| [ 1.624668] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication |
| [ 1.627939] snd_hda_codec_generic hdaudioC0D3: autoconfig for Generic: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line |
| [ 1.627941] snd_hda_codec_generic hdaudioC0D3: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) |
| [ 1.627943] snd_hda_codec_generic hdaudioC0D3: hp_outs=0 (0x0/0x0/0x0/0x0/0x0) |
| [ 1.627944] snd_hda_codec_generic hdaudioC0D3: mono: mono_out=0x0 |
| [ 1.627945] snd_hda_codec_generic hdaudioC0D3: dig-out=0x5/0x0 |
| [ 1.627946] snd_hda_codec_generic hdaudioC0D3: inputs: |
| [ 1.629038] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 |
| [ 1.629089] input: HDA Intel MID Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 |
| [ 1.629140] input: HDA Intel MID Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 |
| [ 1.629186] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 |
| [ 1.629231] input: HDA Intel MID HDMI as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 |
| [ 1.903375] tsc: Refined TSC clocksource calibration: 2526.999 MHz |
| [ 1.903382] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x246cdab5d1d, max_idle_ns: 440795263955 ns |
| [ 1.903445] clocksource: Switched to clocksource tsc |
| [ 1.905321] usb 1-1: new high-speed USB device number 2 using ehci-pci |
| [ 1.910494] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) |
| [ 1.913102] ata2.00: ATAPI: HL-DT-ST DVDRAM GU40N, QX20, max UDMA/133 |
| [ 1.913291] usb 2-1: new high-speed USB device number 2 using ehci-pci |
| [ 1.916045] ata2.00: configured for UDMA/133 |
| [ 1.917878] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GU40N QX20 PQ: 0 ANSI: 5 |
| [ 1.956699] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray |
| [ 1.956701] cdrom: Uniform CD-ROM driver Revision: 3.20 |
| [ 1.956920] sr 1:0:0:0: Attached scsi CD-ROM sr0 |
| [ 1.957027] sr 1:0:0:0: Attached scsi generic sg1 type 5 |
| [ 1.957740] Freeing unused kernel image memory: 908K |
| [ 1.967629] Write protecting the kernel read-only data: 18432k |
| [ 1.968620] Freeing unused kernel image memory: 2012K |
| [ 1.969141] Freeing unused kernel image memory: 1424K |
| [ 1.969238] rodata_test: all tests were successful |
| [ 1.969424] Run /init as init process |
| [ 2.033573] usb 1-1: New USB device found, idVendor=8087, idProduct=0020, bcdDevice= 0.00 |
| [ 2.033576] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 2.033886] hub 1-1:1.0: USB hub found |
| [ 2.033937] hub 1-1:1.0: 6 ports detected |
| [ 2.041615] usb 2-1: New USB device found, idVendor=8087, idProduct=0020, bcdDevice= 0.00 |
| [ 2.041619] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 2.041870] hub 2-1:1.0: USB hub found |
| [ 2.041939] hub 2-1:1.0: 8 ports detected |
| [ 2.319273] usb 2-1.1: new high-speed USB device number 3 using ehci-pci |
| [ 2.400862] random: lvm: uninitialized urandom read (4 bytes read) |
| [ 2.411783] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=0159, bcdDevice=58.88 |
| [ 2.411787] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [ 2.411790] usb 2-1.1: Product: USB2.0-CRW |
| [ 2.411793] usb 2-1.1: Manufacturer: Generic |
| [ 2.411795] usb 2-1.1: SerialNumber: 20071114173400000 |
| [ 2.416780] usb-storage 2-1.1:1.0: USB Mass Storage device detected |
| [ 2.416937] scsi host6: usb-storage 2-1.1:1.0 |
| [ 2.437476] psmouse serio1: synaptics: queried max coordinates: x [..5888], y [..4810] |
| [ 2.481378] usb 2-1.4: new high-speed USB device number 4 using ehci-pci |
| [ 2.519208] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd047b1/0xb40000/0xa0000/0x0, board id: 0, fw id: 615624 |
| [ 2.519214] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0 |
| [ 2.562287] usb 2-1.4: New USB device found, idVendor=12d1, idProduct=15c1, bcdDevice= 1.02 |
| [ 2.562291] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [ 2.562294] usb 2-1.4: Product: HUAWEI Mobile V7R11 |
| [ 2.562297] usb 2-1.4: Manufacturer: Huawei Technologies Co., Ltd. |
| [ 2.562299] usb 2-1.4: SerialNumber: 0123456789ABCDEF |
| [ 2.571432] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7 |
| [ 3.323917] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 |
| [ 3.442247] scsi 6:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS |
| [ 3.442511] sd 6:0:0:0: Attached scsi generic sg2 type 0 |
| [ 3.594608] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input13 |
| [ 4.803284] random: crng init done |
| [ 6.209647] XFS (dm-5): Mounting V4 Filesystem |
| [ 6.270162] XFS (dm-5): Ending clean mount |
| [ 7.816620] udevd[3252]: starting version 3.2.9 |
| [ 7.848511] udevd[3252]: starting eudev-3.2.9 |
| [ 7.925933] udevd[3288]: error opening ATTR{/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/host6/scsi_host/host6/link_power_management_policy} for writing: Permission denied |
| [ 7.968823] usbcore: registered new interface driver option |
| [ 7.968839] usbserial: USB Serial support registered for GSM modem (1-port) |
| [ 7.968942] option 2-1.4:2.2: GSM modem (1-port) converter detected |
| [ 7.969929] usb 2-1.4: GSM modem (1-port) converter now attached to ttyUSB0 |
| [ 7.969986] option 2-1.4:2.3: GSM modem (1-port) converter detected |
| [ 7.970063] usb 2-1.4: GSM modem (1-port) converter now attached to ttyUSB1 |
| [ 7.970109] option 2-1.4:2.4: GSM modem (1-port) converter detected |
| [ 7.970364] usb 2-1.4: GSM modem (1-port) converter now attached to ttyUSB2 |
| [ 7.970416] option 2-1.4:2.5: GSM modem (1-port) converter detected |
| [ 7.970487] usb 2-1.4: GSM modem (1-port) converter now attached to ttyUSB3 |
| [ 7.970536] option 2-1.4:2.6: GSM modem (1-port) converter detected |
| [ 7.970597] usb 2-1.4: GSM modem (1-port) converter now attached to ttyUSB4 |
| [ 9.226530] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem |
| [ 9.235051] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null) |
| [ 9.238197] XFS (dm-6): Mounting V5 Filesystem |
| [ 9.354858] XFS (dm-6): Ending clean mount |
| [ 9.396531] XFS (dm-9): Mounting V5 Filesystem |
| [ 9.447120] XFS (dm-9): Ending clean mount |
| [ 9.468907] XFS (dm-7): Mounting V5 Filesystem |
| [ 9.536499] XFS (dm-7): Ending clean mount |
| [ 10.599600] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready |
| [ 10.612003] usb 2-1.1: USB disconnect, device number 3 |
| [ 10.619293] sd 6:0:0:0: [sdb] Attached SCSI removable disk |
| [ 10.622664] udevd[3288]: inotify_add_watch(7, /dev/sdb, 10) failed: No such file or directory |
| [ 10.624439] udevd[3292]: inotify_add_watch(7, /dev/sdb, 10) failed: No such file or directory |
| [ 10.633632] udevd[3293]: error opening ATTR{/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/host6/scsi_host/host6/link_power_management_policy} for writing: No such file or directory |
| [ 10.657813] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 13.216444] wlan0: authenticate with 04:f0:21:3b:fc:7a |
| [ 13.237145] wlan0: send auth to 04:f0:21:3b:fc:7a (try 1/3) |
| [ 13.239227] wlan0: authenticated |
| [ 13.240361] wlan0: associate with 04:f0:21:3b:fc:7a (try 1/3) |
| [ 13.242454] wlan0: RX AssocResp from 04:f0:21:3b:fc:7a (capab=0x11 status=0 aid=1) |
| [ 13.242595] wlan0: associated |
| [ 13.255360] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready |
| [ 59.055374] usb 1-1.2: new high-speed USB device number 3 using ehci-pci |
| [ 59.135290] usb 1-1.2: New USB device found, idVendor=11b0, idProduct=6298, bcdDevice= 1.08 |
| [ 59.135294] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [ 59.135297] usb 1-1.2: Product: SNA-DC/U |
| [ 59.135299] usb 1-1.2: Manufacturer: Kingston |
| [ 59.135301] usb 1-1.2: SerialNumber: 365643524652573920202020 |
| [ 59.135662] usb-storage 1-1.2:1.0: USB Mass Storage device detected |
| [ 59.135935] scsi host6: usb-storage 1-1.2:1.0 |
| [ 59.141359] udevd[4722]: error opening ATTR{/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host6/scsi_host/host6/link_power_management_policy} for writing: Permission denied |
| [ 60.144324] scsi 6:0:0:0: Direct-Access Kingston SNA-DC/U 1.08 PQ: 0 ANSI: 4 |
| [ 60.144557] sd 6:0:0:0: Attached scsi generic sg2 type 0 |
| [ 60.145102] sd 6:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/233 GiB) |
| [ 60.145853] sd 6:0:0:0: [sdb] Write Protect is off |
| [ 60.145857] sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00 |
| [ 60.146492] sd 6:0:0:0: [sdb] No Caching mode page found |
| [ 60.146497] sd 6:0:0:0: [sdb] Assuming drive cache: write through |
| [ 60.213725] sdb: sdb1 sdb2 |
| [ 60.216389] sd 6:0:0:0: [sdb] Attached SCSI disk |
| [ 62.153075] EXT4-fs (sdb1): mounting ext3 file system using the ext4 subsystem |
| [ 62.515040] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) |
| [ 148.112540] ACPI: \_SB_.DOCK: undocking |
| [ 148.113790] ACPI: \_SB_.DOCK: No _EJ0 support for device |
| [ 148.616181] PM: suspend entry (deep) |
| [ 148.616184] PM: Syncing filesystems ... done. |
| [ 148.638899] Freezing user space processes ... (elapsed 0.001 seconds) done. |
| [ 148.640205] OOM killer disabled. |
| [ 148.640206] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. |
| [ 148.641348] Suspending console(s) (use no_console_suspend to debug) |
| [ 148.811316] sd 0:0:0:0: [sda] Synchronizing SCSI cache |
| [ 148.814314] sd 0:0:0:0: [sda] Stopping disk |
| [ 148.860642] wlan0: deauthenticating from 04:f0:21:3b:fc:7a by local choice (Reason: 3=DEAUTH_LEAVING) |
| [ 148.861212] e1000e: EEE TX LPI TIMER: 00000000 |
| [ 149.167846] ACPI: EC: interrupt blocked |
| [ 149.191435] ACPI: Preparing to enter system sleep state S3 |
| [ 149.202895] ACPI: EC: event blocked |
| [ 149.202896] ACPI: EC: EC stopped |
| [ 149.202897] PM: Saving platform NVS memory |
| [ 149.202898] Disabling non-boot CPUs ... |
| [ 149.209732] smpboot: CPU 1 is now offline |
| [ 149.218024] smpboot: CPU 2 is now offline |
| [ 149.224641] smpboot: CPU 3 is now offline |
| [ 149.225585] ACPI: Low-level resume complete |
| [ 149.225624] ACPI: EC: EC started |
| [ 149.225625] PM: Restoring platform NVS memory |
| [ 149.225953] Enabling non-boot CPUs ... |
| [ 149.225987] x86: Booting SMP configuration: |
| [ 149.225988] smpboot: Booting Node 0 Processor 1 APIC 0x1 |
| [ 149.228311] cache: parent cpu1 should not be sleeping |
| [ 149.228709] CPU1 is up |
| [ 149.228727] smpboot: Booting Node 0 Processor 2 APIC 0x4 |
| [ 149.231037] cache: parent cpu2 should not be sleeping |
| [ 149.231350] CPU2 is up |
| [ 149.231367] smpboot: Booting Node 0 Processor 3 APIC 0x5 |
| [ 149.233659] cache: parent cpu3 should not be sleeping |
| [ 149.234004] CPU3 is up |
| [ 149.235653] ACPI: Waking up from system sleep state S3 |
| [ 149.244343] pci 0000:00:16.0: Refused to change power state, currently in D3 |
| [ 149.244449] ACPI: EC: interrupt unblocked |
| [ 149.306752] ACPI: EC: event unblocked |
| [ 149.307653] ACPI: button: The lid device is not compliant to SW_LID. |
| [ 149.307796] sd 0:0:0:0: [sda] Starting disk |
| [ 149.614603] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) |
| [ 149.620176] ata2.00: configured for UDMA/133 |
| [ 149.665217] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) |
| [ 149.665482] ata1.00: supports DRM functions and may not be fully accessible |
| [ 149.665961] ata1.00: NCQ Send/Recv Log not supported |
| [ 149.666864] ata1.00: supports DRM functions and may not be fully accessible |
| [ 149.667355] ata1.00: NCQ Send/Recv Log not supported |
| [ 149.667925] ata1.00: configured for UDMA/133 |
| [ 150.012676] psmouse serio1: synaptics: queried max coordinates: x [..5888], y [..4810] |
| [ 151.464246] usb 1-1.2: reset high-speed USB device number 3 using ehci-pci |
| [ 151.668340] OOM killer enabled. |
| [ 151.668341] Restarting tasks ... done. |
| [ 151.685245] video LNXVIDEO:00: Restoring backlight state |
| [ 151.688232] PM: suspend exit |
| [ 151.734251] usb 2-1.1: new high-speed USB device number 5 using ehci-pci |
| [ 151.825941] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=0159, bcdDevice=58.88 |
| [ 151.825944] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [ 151.825947] usb 2-1.1: Product: USB2.0-CRW |
| [ 151.825949] usb 2-1.1: Manufacturer: Generic |
| [ 151.825950] usb 2-1.1: SerialNumber: 20071114173400000 |
| [ 151.830938] usb-storage 2-1.1:1.0: USB Mass Storage device detected |
| [ 151.831159] scsi host7: usb-storage 2-1.1:1.0 |
| [ 151.831612] usb 2-1.4: USB disconnect, device number 4 |
| [ 151.832016] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 |
| [ 151.832049] option 2-1.4:2.2: device disconnected |
| [ 151.832393] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 |
| [ 151.832417] option 2-1.4:2.3: device disconnected |
| [ 151.833038] udevd[5004]: error opening ATTR{/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/host7/scsi_host/host7/link_power_management_policy} for writing: Permission denied |
| [ 151.833049] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2 |
| [ 151.833075] option 2-1.4:2.4: device disconnected |
| [ 151.833456] option1 ttyUSB3: GSM modem (1-port) converter now disconnected from ttyUSB3 |
| [ 151.833481] option 2-1.4:2.5: device disconnected |
| [ 151.833746] option1 ttyUSB4: GSM modem (1-port) converter now disconnected from ttyUSB4 |
| [ 151.833772] option 2-1.4:2.6: device disconnected |
| [ 152.883009] scsi 7:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS |
| [ 152.883248] sd 7:0:0:0: Attached scsi generic sg3 type 0 |
| [ 153.321210] usb 2-1.4: new high-speed USB device number 6 using ehci-pci |
| [ 153.401660] usb 2-1.4: New USB device found, idVendor=12d1, idProduct=15c1, bcdDevice= 1.02 |
| [ 153.401664] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [ 153.401666] usb 2-1.4: Product: HUAWEI Mobile V7R11 |
| [ 153.401670] usb 2-1.4: Manufacturer: Huawei Technologies Co., Ltd. |
| [ 153.401673] usb 2-1.4: SerialNumber: 0123456789ABCDEF |
| [ 153.404217] option 2-1.4:2.2: GSM modem (1-port) converter detected |
| [ 153.404308] usb 2-1.4: GSM modem (1-port) converter now attached to ttyUSB0 |
| [ 153.404717] option 2-1.4:2.3: GSM modem (1-port) converter detected |
| [ 153.404789] usb 2-1.4: GSM modem (1-port) converter now attached to ttyUSB1 |
| [ 153.405022] option 2-1.4:2.4: GSM modem (1-port) converter detected |
| [ 153.405064] usb 2-1.4: GSM modem (1-port) converter now attached to ttyUSB2 |
| [ 153.405318] option 2-1.4:2.5: GSM modem (1-port) converter detected |
| [ 153.405404] usb 2-1.4: GSM modem (1-port) converter now attached to ttyUSB3 |
| [ 153.405702] option 2-1.4:2.6: GSM modem (1-port) converter detected |
| [ 153.405770] usb 2-1.4: GSM modem (1-port) converter now attached to ttyUSB4 |
| [ 154.216913] wlan0: authenticate with 04:f0:21:3b:fc:7a |
| [ 154.238516] wlan0: send auth to 04:f0:21:3b:fc:7a (try 1/3) |
| [ 154.240441] wlan0: authenticated |
| [ 154.241214] wlan0: associate with 04:f0:21:3b:fc:7a (try 1/3) |
| [ 154.243264] wlan0: RX AssocResp from 04:f0:21:3b:fc:7a (capab=0x11 status=0 aid=1) |
| [ 154.243400] wlan0: associated |
| [ 156.174349] ACPI: \_SB_.DOCK: undocking |
| [ 156.175629] ACPI: \_SB_.DOCK: No _EJ0 support for device |
| [ 156.677059] PM: suspend entry (deep) |
| [ 156.677062] PM: Syncing filesystems ... done. |
| [ 156.680299] Freezing user space processes ... |
| [ 159.987860] sd 7:0:0:0: [sdc] Attached SCSI removable disk |
| [ 163.615908] usb 2-1.1: USB disconnect, device number 5 |
| [ 163.631311] (elapsed 6.951 seconds) done. |
| [ 163.631316] OOM killer disabled. |
| [ 163.631317] Freezing remaining freezable tasks ... (elapsed 0.128 seconds) done. |
| [ 163.759972] Suspending console(s) (use no_console_suspend to debug) |
| [ 163.938232] sd 0:0:0:0: [sda] Synchronizing SCSI cache |
| [ 163.939472] sd 0:0:0:0: [sda] Stopping disk |
| [ 163.987465] wlan0: deauthenticating from 04:f0:21:3b:fc:7a by local choice (Reason: 3=DEAUTH_LEAVING) |
| [ 163.987765] e1000e: EEE TX LPI TIMER: 00000000 |
| [ 164.301789] ACPI: EC: interrupt blocked |
| [ 164.325360] ACPI: Preparing to enter system sleep state S3 |
| [ 164.336505] ACPI: EC: event blocked |
| [ 164.336506] ACPI: EC: EC stopped |
| [ 164.336507] PM: Saving platform NVS memory |
| [ 164.336508] Disabling non-boot CPUs ... |
| [ 164.343648] smpboot: CPU 1 is now offline |
| [ 164.351811] smpboot: CPU 2 is now offline |
| [ 164.357561] smpboot: CPU 3 is now offline |
| [ 164.358425] ACPI: Low-level resume complete |
| [ 164.358465] ACPI: EC: EC started |
| [ 164.358465] PM: Restoring platform NVS memory |
| [ 164.358793] Enabling non-boot CPUs ... |
| [ 164.358827] x86: Booting SMP configuration: |
| [ 164.358828] smpboot: Booting Node 0 Processor 1 APIC 0x1 |
| [ 164.361174] cache: parent cpu1 should not be sleeping |
| [ 164.361576] CPU1 is up |
| [ 164.361594] smpboot: Booting Node 0 Processor 2 APIC 0x4 |
| [ 164.363930] cache: parent cpu2 should not be sleeping |
| [ 164.364241] CPU2 is up |
| [ 164.364260] smpboot: Booting Node 0 Processor 3 APIC 0x5 |
| [ 164.366573] cache: parent cpu3 should not be sleeping |
| [ 164.366925] CPU3 is up |
| [ 164.368575] ACPI: Waking up from system sleep state S3 |
| [ 164.377066] pci 0000:00:16.0: Refused to change power state, currently in D3 |
| [ 164.377180] ACPI: EC: interrupt unblocked |
| [ 164.403407] ACPI: EC: event unblocked |
| [ 164.403832] sd 0:0:0:0: [sda] Starting disk |
| [ 164.710700] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) |
| [ 164.716262] ata2.00: configured for UDMA/133 |
| [ 164.815180] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) |
| [ 164.815524] ata1.00: supports DRM functions and may not be fully accessible |
| [ 164.816096] ata1.00: NCQ Send/Recv Log not supported |
| [ 164.817203] ata1.00: supports DRM functions and may not be fully accessible |
| [ 164.817637] ata1.00: NCQ Send/Recv Log not supported |
| [ 164.818076] ata1.00: configured for UDMA/133 |
| [ 165.145015] psmouse serio1: synaptics: queried max coordinates: x [..5888], y [..4810] |
| [ 166.763644] OOM killer enabled. |
| [ 166.763645] Restarting tasks ... done. |
| [ 166.766006] usb 1-1.2: USB disconnect, device number 3 |
| [ 166.766277] udevd[5001]: error opening ATTR{/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/host7/scsi_host/host7/link_power_management_policy} for writing: No such file or directory |
| [ 166.773929] udevd[5005]: inotify_add_watch(7, /dev/sdc, 10) failed: No such file or directory |
| [ 166.777824] udevd[5004]: inotify_add_watch(7, /dev/sdc, 10) failed: No such file or directory |
| [ 166.781747] video LNXVIDEO:00: Restoring backlight state |
| [ 166.784161] PM: suspend exit |
| [ 166.825339] udevd[5060]: error opening ATTR{/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host6/scsi_host/host6/link_power_management_policy} for writing: No such file or directory |
| [ 166.831127] usb 2-1.1: new high-speed USB device number 7 using ehci-pci |
| [ 166.921852] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=0159, bcdDevice=58.88 |
| [ 166.921855] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [ 166.921858] usb 2-1.1: Product: USB2.0-CRW |
| [ 166.921860] usb 2-1.1: Manufacturer: Generic |
| [ 166.921862] usb 2-1.1: SerialNumber: 20071114173400000 |
| [ 166.926842] usb-storage 2-1.1:1.0: USB Mass Storage device detected |
| [ 166.927066] scsi host7: usb-storage 2-1.1:1.0 |
| [ 166.927517] usb 2-1.4: USB disconnect, device number 6 |
| [ 166.927926] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 |
| [ 166.927943] option 2-1.4:2.2: device disconnected |
| [ 166.928065] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 |
| [ 166.928087] option 2-1.4:2.3: device disconnected |
| [ 166.928571] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2 |
| [ 166.928603] option 2-1.4:2.4: device disconnected |
| [ 166.928627] udevd[5004]: error opening ATTR{/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/host7/scsi_host/host7/link_power_management_policy} for writing: Permission denied |
| [ 166.929407] option1 ttyUSB3: GSM modem (1-port) converter now disconnected from ttyUSB3 |
| [ 166.929430] option 2-1.4:2.5: device disconnected |
| [ 166.929820] option1 ttyUSB4: GSM modem (1-port) converter now disconnected from ttyUSB4 |
| [ 166.929841] option 2-1.4:2.6: device disconnected |
| [ 167.089203] usb 1-1.2: new high-speed USB device number 4 using ehci-pci |
| [ 167.168944] usb 1-1.2: New USB device found, idVendor=11b0, idProduct=6298, bcdDevice= 1.08 |
| [ 167.168948] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [ 167.168950] usb 1-1.2: Product: SNA-DC/U |
| [ 167.168953] usb 1-1.2: Manufacturer: Kingston |
| [ 167.168955] usb 1-1.2: SerialNumber: 365643524652573920202020 |
| [ 167.169320] usb-storage 1-1.2:1.0: USB Mass Storage device detected |
| [ 167.169489] scsi host8: usb-storage 1-1.2:1.0 |
| [ 167.170675] udevd[5004]: error opening ATTR{/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/scsi_host/host8/link_power_management_policy} for writing: Permission denied |
| [ 167.818393] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 167.987806] scsi 7:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS |
| [ 167.988067] sd 7:0:0:0: Attached scsi generic sg2 type 0 |
| [ 168.177984] scsi 8:0:0:0: Direct-Access Kingston SNA-DC/U 1.08 PQ: 0 ANSI: 4 |
| [ 168.178186] sd 8:0:0:0: Attached scsi generic sg3 type 0 |
| [ 168.178764] sd 8:0:0:0: [sdd] 488397168 512-byte logical blocks: (250 GB/233 GiB) |
| [ 168.179443] sd 8:0:0:0: [sdd] Write Protect is off |
| [ 168.179446] sd 8:0:0:0: [sdd] Mode Sense: 23 00 00 00 |
| [ 168.180140] sd 8:0:0:0: [sdd] No Caching mode page found |
| [ 168.180143] sd 8:0:0:0: [sdd] Assuming drive cache: write through |
| [ 168.243543] sdd: sdd1 sdd2 |
| [ 168.246542] sd 8:0:0:0: [sdd] Attached SCSI disk |
| [ 168.418131] usb 2-1.4: new high-speed USB device number 8 using ehci-pci |
| [ 168.498578] usb 2-1.4: New USB device found, idVendor=12d1, idProduct=15c1, bcdDevice= 1.02 |
| [ 168.498582] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [ 168.498585] usb 2-1.4: Product: HUAWEI Mobile V7R11 |
| [ 168.498588] usb 2-1.4: Manufacturer: Huawei Technologies Co., Ltd. |
| [ 168.498590] usb 2-1.4: SerialNumber: 0123456789ABCDEF |
| [ 168.501236] option 2-1.4:2.2: GSM modem (1-port) converter detected |
| [ 168.501340] usb 2-1.4: GSM modem (1-port) converter now attached to ttyUSB0 |
| [ 168.501677] option 2-1.4:2.3: GSM modem (1-port) converter detected |
| [ 168.501731] usb 2-1.4: GSM modem (1-port) converter now attached to ttyUSB1 |
| [ 168.501978] option 2-1.4:2.4: GSM modem (1-port) converter detected |
| [ 168.502027] usb 2-1.4: GSM modem (1-port) converter now attached to ttyUSB2 |
| [ 168.502330] option 2-1.4:2.5: GSM modem (1-port) converter detected |
| [ 168.502382] usb 2-1.4: GSM modem (1-port) converter now attached to ttyUSB3 |
| [ 168.502573] option 2-1.4:2.6: GSM modem (1-port) converter detected |
| [ 168.502617] usb 2-1.4: GSM modem (1-port) converter now attached to ttyUSB4 |
| [ 171.346012] wlan0: authenticate with 04:f0:21:3b:fc:7a |
| [ 171.367404] wlan0: send auth to 04:f0:21:3b:fc:7a (try 1/3) |
| [ 171.369351] wlan0: authenticated |
| [ 171.370120] wlan0: associate with 04:f0:21:3b:fc:7a (try 1/3) |
| [ 171.372277] wlan0: RX AssocResp from 04:f0:21:3b:fc:7a (capab=0x11 status=0 aid=1) |
| [ 171.372411] wlan0: associated |
| [ 171.377531] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready |
| [ 175.090310] sd 7:0:0:0: [sdc] Attached SCSI removable disk |
| [ 179.314127] usb 2-1.1: USB disconnect, device number 7 |
| [ 179.323516] udevd[5060]: inotify_add_watch(7, /dev/sdc, 10) failed: No such file or directory |
| [ 179.325798] udevd[5004]: inotify_add_watch(7, /dev/sdc, 10) failed: No such file or directory |
| [ 179.333464] udevd[5060]: error opening ATTR{/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/host7/scsi_host/host7/link_power_management_policy} for writing: No such file or directory |
| [ 184.070724] EXT4-fs error (device sdb1): ext4_find_entry:1454: inode #2326529: comm git: reading directory lblock 0 |
| [ 184.070741] EXT4-fs error (device sdb1): ext4_find_entry:1454: inode #2326529: comm git: reading directory lblock 0 |
| [ 184.070751] EXT4-fs error (device sdb1): ext4_find_entry:1454: inode #2326529: comm git: reading directory lblock 0 |
| [ 184.070766] EXT4-fs error (device sdb1): ext4_find_entry:1454: inode #2: comm git: reading directory lblock 0 |
| [ 184.070774] EXT4-fs error (device sdb1): ext4_find_entry:1454: inode #2: comm git: reading directory lblock 0 |
| [ 184.070783] EXT4-fs error (device sdb1): ext4_find_entry:1454: inode #2: comm git: reading directory lblock 0 |
| [ 185.647595] EXT4-fs error (device sdb1): ext4_find_entry:1454: inode #2326529: comm git: reading directory lblock 0 |
| [ 185.647609] EXT4-fs error (device sdb1): ext4_find_entry:1454: inode #2326529: comm git: reading directory lblock 0 |
| [ 185.647618] EXT4-fs error (device sdb1): ext4_find_entry:1454: inode #2326529: comm git: reading directory lblock 0 |
| [ 185.647630] EXT4-fs error (device sdb1): ext4_find_entry:1454: inode #2: comm git: reading directory lblock 0 |
| [ 190.018474] EXT4-fs warning (device sdb1): htree_dirblock_to_tree:995: inode #2326529: lblock 0: comm ls: error -5 reading directory block |
| [ 193.120431] EXT4-fs warning (device sdb1): htree_dirblock_to_tree:995: inode #2326529: lblock 0: comm ls: error -5 reading directory block |
| [ 203.054512] EXT4-fs warning (device sdb1): htree_dirblock_to_tree:995: inode #2326529: lblock 0: comm ls: error -5 reading directory block |
| [ 207.774286] Buffer I/O error on dev sdb1, logical block 13074946, lost sync page write |
| [ 207.774290] JBD2: Error -5 detected when updating journal superblock for sdb1-8. |
| [ 207.774291] Aborting journal on device sdb1-8. |
| [ 207.774294] Buffer I/O error on dev sdb1, logical block 13074946, lost sync page write |
| [ 207.774295] JBD2: Error -5 detected when updating journal superblock for sdb1-8. |
| [ 212.550587] usb 1-1.2: USB disconnect, device number 4 |
| [ 212.565482] udevd[5144]: error opening ATTR{/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host8/scsi_host/host8/link_power_management_policy} for writing: No such file or directory |
| [ 220.553204] usb 1-1.2: new high-speed USB device number 5 using ehci-pci |
| [ 220.632833] usb 1-1.2: New USB device found, idVendor=11b0, idProduct=6298, bcdDevice= 1.08 |
| [ 220.632836] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [ 220.632838] usb 1-1.2: Product: SNA-DC/U |
| [ 220.632840] usb 1-1.2: Manufacturer: Kingston |
| [ 220.632842] usb 1-1.2: SerialNumber: 365643524652573920202020 |
| [ 220.633100] usb-storage 1-1.2:1.0: USB Mass Storage device detected |
| [ 220.633305] scsi host6: usb-storage 1-1.2:1.0 |
| [ 220.635321] udevd[5150]: error opening ATTR{/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/host6/scsi_host/host6/link_power_management_policy} for writing: Permission denied |
| [ 221.682207] scsi 6:0:0:0: Direct-Access Kingston SNA-DC/U 1.08 PQ: 0 ANSI: 4 |
| [ 221.682431] sd 6:0:0:0: Attached scsi generic sg2 type 0 |
| [ 221.683184] sd 6:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/233 GiB) |
| [ 221.683923] sd 6:0:0:0: [sdb] Write Protect is off |
| [ 221.683928] sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00 |
| [ 221.684677] sd 6:0:0:0: [sdb] No Caching mode page found |
| [ 221.684681] sd 6:0:0:0: [sdb] Assuming drive cache: write through |
| [ 221.751398] sdb: sdb1 sdb2 |
| [ 221.754201] sd 6:0:0:0: [sdb] Attached SCSI disk |
| [ 223.030176] EXT4-fs (sdb1): mounting ext3 file system using the ext4 subsystem |
| [ 224.514890] EXT4-fs (sdb1): recovery complete |
| [ 224.515709] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) |