| |
| coreboot-4.9-2563-g640ca69c05 Sun Jul 21 20:09:24 UTC 2019 romstage starting (log level: 7)... |
| Stepping B3 |
| SMBus controller enabled. |
| 0:50:b |
| 2:51:b |
| Changing memory frequency: old 3, new 6. |
| Setting IGD memory frequencies for VCO #1. |
| Memory configured in dual-channel assymetric mode. |
| JEDEC init @0x00000000 |
| JEDEC init @0x08000000 |
| JEDEC init @0x10000000 |
| JEDEC init @0x18000000 |
| group 0, ch 0: 6.1.0.3.5 |
| group 1, ch 0: 6.0.2.7.2 |
| group 2, ch 0: 6.1.2.1.6 |
| group 3, ch 0: 6.1.0.6.4 |
| group 0, ch 1: 6.1.0.0.1 |
| group 1, ch 1: 6.0.2.4.6 |
| group 2, ch 1: 6.1.2.0.4 |
| group 3, ch 1: 6.1.0.6.4 |
| byte lane 0, ch 0: 4.6 |
| byte lane 1, ch 0: 5.3 |
| byte lane 2, ch 0: 5.0 |
| byte lane 3, ch 0: 4.3 |
| byte lane 4, ch 0: 4.6 |
| byte lane 5, ch 0: 4.5 |
| byte lane 6, ch 0: 3.7 |
| byte lane 7, ch 0: 5.3 |
| byte lane 0, ch 1: 4.2 |
| byte lane 1, ch 1: 4.7 |
| byte lane 2, ch 1: 4.5 |
| byte lane 3, ch 1: 4.5 |
| byte lane 4, ch 1: 4.5 |
| byte lane 5, ch 1: 4.5 |
| byte lane 6, ch 1: 4.1 |
| byte lane 7, ch 1: 5.1 |
| group 0, ch 0: 1.10.7 |
| group 1, ch 0: 1.9.6 |
| group 2, ch 0: 2.4.6 |
| group 3, ch 0: 2.8.3 |
| FMAP: Found "FLASH" version 1.1 at 10000. |
| FMAP: base = ff800000 size = 800000 #areas = 3 |
| FMAP: area COREBOOT found @ 10200 (8322560 bytes) |
| CBFS: Locating 'cmos_layout.bin' |
| CBFS: Found @ offset 35140 size 680 |
| IGD decoded, subtracting 32M UMA and 4M GTT |
| Memory configured in dual-channel interleaved mode. |
| Enabling IGD. |
| Finally disabling PEG in favor of IGD. |
| PEG x1 disabled, SDVO disabled |
| ICH9 waits for VC1 negotiation... done. |
| ICH9 waits for port arbitration table update... done. |
| CBMEM: |
| IMD: root @ 7d7ff000 254 entries. |
| IMD: root @ 7d7fec00 62 entries. |
| External stage cache: |
| IMD: root @ 7dbff000 254 entries. |
| IMD: root @ 7dbfec00 62 entries. |
| MTRR Range: Start=ff800000 End=0 (Size 800000) |
| MTRR Range: Start=0 End=1000000 (Size 1000000) |
| MTRR Range: Start=7d000000 End=7d800000 (Size 800000) |
| MTRR Range: Start=7da00000 End=7dc00000 (Size 200000) |
| CBFS: 'Master Header Locator' located CBFS at [10200:800000) |
| CBFS: Locating 'fallback/postcar' |
| CBFS: Found @ offset 35800 size 4abc |
| Decompressing stage fallback/postcar @ 0x7d7d2fc0 (35864 bytes) |
| Loading module at 7d7d3000 with entry 7d7d3000. filesize: 0x47d0 memsize: 0x8bd8 |
| Processing 164 relocs. Offset value of 0x7b7d3000 |
| |
| |
| coreboot-4.9-2563-g640ca69c05 Sun Jul 21 20:09:24 UTC 2019 postcar starting (log level: 7)... |
| usbdebug: Failed hardware init |
| CBFS: 'Master Header Locator' located CBFS at [10200:800000) |
| CBFS: Locating 'fallback/ramstage' |
| CBFS: Found @ offset 1a4c0 size 1a61b |
| Decompressing stage fallback/ramstage @ 0x7d78bfc0 (283152 bytes) |
| Loading module at 7d78c000 with entry 7d78c000. filesize: 0x36390 memsize: 0x451d0 |
| Processing 3862 relocs. Offset value of 0x7c98c000 |
| |
| |
| coreboot-4.9-2563-g640ca69c05 Sun Jul 21 20:09:24 UTC 2019 ramstage starting (log level: 7)... |
| usbdebug: Failed hardware init |
| Normal boot. |
| apic timer freq (266) may be too fast. |
| BS: BS_PRE_DEVICE times (us): entry 0 run 1 exit 0 |
| Initializing i82801ix southbridge... |
| BS: BS_DEV_INIT_CHIPS times (us): entry 0 run 73 exit 0 |
| Enumerating buses... |
| CPU_CLUSTER: 0 enabled |
| DOMAIN: 0000 enabled |
| PCI: pci_scan_bus for bus 00 |
| PCI: 00:00.0 [8086/2a40] enabled |
| PCI: 00:02.0 [8086/2a42] enabled |
| PCI: 00:02.1 [8086/2a43] enabled |
| PCI: Static device PCI: 00:03.0 not found, disabling it. |
| PCI: 00:19.0 [8086/10f5] enabled |
| PCI: 00:1a.0 [8086/2937] enabled |
| PCI: 00:1a.1 [8086/2938] enabled |
| PCI: 00:1a.2 [8086/2939] enabled |
| PCI: 00:1a.7 [8086/293c] enabled |
| PCI: 00:1b.0 [8086/293e] enabled |
| PCI: 00:1c.0 [8086/2940] enabled |
| PCI: 00:1c.1 [8086/2942] enabled |
| PCI: 00:1c.2 [8086/2944] enabled |
| PCI: 00:1c.3 [8086/2946] enabled |
| PCI: 00:1d.0 [8086/2934] enabled |
| PCI: 00:1d.1 [8086/2935] enabled |
| PCI: 00:1d.2 [8086/2936] enabled |
| PCI: 00:1d.7 [8086/293a] enabled |
| PCI: 00:1e.0 [8086/2448] enabled |
| PCI: 00:1f.0 [8086/2917] enabled |
| FMAP: area COREBOOT found @ 10200 (8322560 bytes) |
| CBFS: Locating 'cmos_layout.bin' |
| CBFS: Found @ offset 35140 size 680 |
| PCI: 00:1f.2 [8086/2928] enabled |
| PCI: 00:1f.3 [8086/2930] enabled |
| PCI: Leftover static devices: |
| PCI: 00:03.0 |
| PCI: 00:03.1 |
| PCI: 00:03.2 |
| PCI: 00:03.3 |
| PCI: 00:1c.4 |
| PCI: 00:1c.5 |
| PCI: 00:1f.5 |
| PCI: 00:1f.6 |
| PCI: Check your devicetree.cb. |
| PCI: pci_scan_bus for bus 01 |
| scan_bus: scanning of bus PCI: 00:1c.0 took 35 usecs |
| PCI: pci_scan_bus for bus 02 |
| PCI: 02:00.0 [168c/0030] enabled |
| Failed to enable LTR for dev = PCI: 02:00.0 |
| scan_bus: scanning of bus PCI: 00:1c.1 took 69 usecs |
| PCI: pci_scan_bus for bus 03 |
| scan_bus: scanning of bus PCI: 00:1c.2 took 35 usecs |
| PCI: pci_scan_bus for bus 04 |
| scan_bus: scanning of bus PCI: 00:1c.3 took 35 usecs |
| PCI: pci_scan_bus for bus 05 |
| scan_bus: scanning of bus PCI: 00:1e.0 took 47 usecs |
| IOAPIC: 02 enabled |
| FMAP: area COREBOOT found @ 10200 (8322560 bytes) |
| CBFS: Locating 'cmos_layout.bin' |
| CBFS: Found @ offset 35140 size 680 |
| No CMOS option 'touchpad'. |
| FMAP: area COREBOOT found @ 10200 (8322560 bytes) |
| CBFS: Locating 'cmos_layout.bin' |
| CBFS: Found @ offset 35140 size 680 |
| PMH7: ID 03 Revision 10 |
| PNP: 00ff.1 enabled |
| EC Firmware ID 7XHT25WW-3.6, Version 7.01A |
| FMAP: area COREBOOT found @ 10200 (8322560 bytes) |
| CBFS: Locating 'cmos_layout.bin' |
| CBFS: Found @ offset 35140 size 680 |
| FMAP: area COREBOOT found @ 10200 (8322560 bytes) |
| CBFS: Locating 'cmos_layout.bin' |
| CBFS: Found @ offset 35140 size 680 |
| FMAP: area COREBOOT found @ 10200 (8322560 bytes) |
| CBFS: Locating 'cmos_layout.bin' |
| CBFS: Found @ offset 35140 size 680 |
| No CMOS option 'usb_always_on'. |
| FMAP: area COREBOOT found @ 10200 (8322560 bytes) |
| CBFS: Locating 'cmos_layout.bin' |
| CBFS: Found @ offset 35140 size 680 |
| FMAP: area COREBOOT found @ 10200 (8322560 bytes) |
| CBFS: Locating 'cmos_layout.bin' |
| CBFS: Found @ offset 35140 size 680 |
| H8: BDC installed |
| FMAP: area COREBOOT found @ 10200 (8322560 bytes) |
| CBFS: Locating 'cmos_layout.bin' |
| CBFS: Found @ offset 35140 size 680 |
| H8: WWAN detection not implemented. Assuming WWAN installed |
| FMAP: area COREBOOT found @ 10200 (8322560 bytes) |
| CBFS: Locating 'cmos_layout.bin' |
| CBFS: Found @ offset 35140 size 680 |
| FMAP: area COREBOOT found @ 10200 (8322560 bytes) |
| CBFS: Locating 'cmos_layout.bin' |
| CBFS: Found @ offset 35140 size 680 |
| FMAP: area COREBOOT found @ 10200 (8322560 bytes) |
| CBFS: Locating 'cmos_layout.bin' |
| CBFS: Found @ offset 35140 size 680 |
| FMAP: area COREBOOT found @ 10200 (8322560 bytes) |
| CBFS: Locating 'cmos_layout.bin' |
| CBFS: Found @ offset 35140 size 680 |
| FMAP: area COREBOOT found @ 10200 (8322560 bytes) |
| CBFS: Locating 'cmos_layout.bin' |
| CBFS: Found @ offset 35140 size 680 |
| dock is not connected |
| PNP: 00ff.2 enabled |
| PNP: 164e.3 enabled |
| PNP: 164e.2 disabled |
| PNP: 164e.7 disabled |
| PNP: 164e.19 disabled |
| scan_bus: scanning of bus PCI: 00:1f.0 took 10051 usecs |
| bus: PCI: 00:1f.3[0]->I2C: 01:54 enabled |
| bus: PCI: 00:1f.3[0]->I2C: 01:55 enabled |
| bus: PCI: 00:1f.3[0]->I2C: 01:56 enabled |
| bus: PCI: 00:1f.3[0]->I2C: 01:57 enabled |
| bus: PCI: 00:1f.3[0]->I2C: 01:5c enabled |
| bus: PCI: 00:1f.3[0]->I2C: 01:5d enabled |
| bus: PCI: 00:1f.3[0]->I2C: 01:5e enabled |
| bus: PCI: 00:1f.3[0]->I2C: 01:5f enabled |
| scan_bus: scanning of bus PCI: 00:1f.3 took 25 usecs |
| scan_bus: scanning of bus DOMAIN: 0000 took 10800 usecs |
| scan_bus: scanning of bus Root Device took 10806 usecs |
| done |
| BS: BS_DEV_ENUMERATE times (us): entry 0 run 10835 exit 0 |
| found VGA at PCI: 00:02.0 |
| Setting up VGA for PCI: 00:02.0 |
| Setting PCI_BRIDGE_CTL_VGA for bridge DOMAIN: 0000 |
| Setting PCI_BRIDGE_CTL_VGA for bridge Root Device |
| Allocating resources... |
| Reading resources... |
| TOUUD 0x280000000 TOLUD 0x80000000 TOM 0x200000000 |
| IGD decoded, subtracting 32M UMA, 4M GTT and 2M TSEG |
| Unused RAM between cbmem_top and TOM: 0x800K |
| Available memory below 4GB: 2008M |
| Available memory above 4GB: 6144M |
| Adding UMA memory area base=0x7d800000 size=0x2800000 |
| Adding PCIe config bar base=0xf0000000 size=0x4000000 |
| PCI: 00:1a.7 EHCI BAR hook registered |
| More than one caller of pci_ehci_read_resources from PCI: 00:1d.7 |
| PNP: 00ff.1 missing read_resources |
| PNP: 00ff.2 missing read_resources |
| Done reading resources. |
| skipping PNP: 00ff.2@60 fixed resource, size=0! |
| skipping PNP: 00ff.2@62 fixed resource, size=0! |
| skipping PNP: 00ff.2@64 fixed resource, size=0! |
| skipping PNP: 00ff.2@66 fixed resource, size=0! |
| skipping PNP: 164e.3@29 fixed resource, size=0! |
| skipping PNP: 164e.3@f0 fixed resource, size=0! |
| Setting resources... |
| DOMAIN: 0000 03 <- [0x0000000000 - 0x000009ffff] size 0x000a0000 gran 0x00 mem |
| DOMAIN: 0000 04 <- [0x00000c0000 - 0x007d7fffff] size 0x7d740000 gran 0x00 mem |
| DOMAIN: 0000 05 <- [0x0100000000 - 0x027fffffff] size 0x180000000 gran 0x00 mem |
| DOMAIN: 0000 06 <- [0x007d800000 - 0x007fffffff] size 0x02800000 gran 0x00 mem |
| DOMAIN: 0000 07 <- [0x00f0000000 - 0x00f3ffffff] size 0x04000000 gran 0x00 mem |
| PCI: 00:02.0 10 <- [0x00e1000000 - 0x00e13fffff] size 0x00400000 gran 0x16 mem64 |
| PCI: 00:02.0 18 <- [0x00d0000000 - 0x00dfffffff] size 0x10000000 gran 0x1c prefmem64 |
| PCI: 00:02.0 20 <- [0x0000003400 - 0x0000003407] size 0x00000008 gran 0x03 io |
| PCI: 00:02.1 10 <- [0x00e1400000 - 0x00e14fffff] size 0x00100000 gran 0x14 mem64 |
| PCI: 00:19.0 10 <- [0x00e1600000 - 0x00e161ffff] size 0x00020000 gran 0x11 mem |
| PCI: 00:19.0 14 <- [0x00e1624000 - 0x00e1624fff] size 0x00001000 gran 0x0c mem |
| PCI: 00:19.0 18 <- [0x0000003000 - 0x000000301f] size 0x00000020 gran 0x05 io |
| PCI: 00:1a.0 20 <- [0x0000003020 - 0x000000303f] size 0x00000020 gran 0x05 io |
| PCI: 00:1a.1 20 <- [0x0000003040 - 0x000000305f] size 0x00000020 gran 0x05 io |
| PCI: 00:1a.2 20 <- [0x0000003060 - 0x000000307f] size 0x00000020 gran 0x05 io |
| PCI: 00:1a.7 EHCI Debug Port hook triggered |
| PCI: 00:1a.7 10 <- [0x00e1626000 - 0x00e16263ff] size 0x00000400 gran 0x0a mem |
| PCI: 00:1a.7 10 <- [0x00e1626000 - 0x00e16263ff] size 0x00000400 gran 0x0a mem |
| PCI: 00:1a.7 EHCI Debug Port relocated |
| PCI: 00:1b.0 10 <- [0x00e1620000 - 0x00e1623fff] size 0x00004000 gran 0x0e mem64 |
| PCI: 00:1c.0 1c <- [0x000000ffff - 0x000000fffe] size 0x00000000 gran 0x0c bus 01 io |
| PCI: 00:1c.0 24 <- [0x00efffffff - 0x00effffffe] size 0x00000000 gran 0x14 bus 01 prefmem |
| PCI: 00:1c.0 20 <- [0x00efffffff - 0x00effffffe] size 0x00000000 gran 0x14 bus 01 mem |
| PCI: 00:1c.1 1c <- [0x000000ffff - 0x000000fffe] size 0x00000000 gran 0x0c bus 02 io |
| PCI: 00:1c.1 24 <- [0x00efffffff - 0x00effffffe] size 0x00000000 gran 0x14 bus 02 prefmem |
| PCI: 00:1c.1 20 <- [0x00e1500000 - 0x00e15fffff] size 0x00100000 gran 0x14 bus 02 mem |
| PCI: 02:00.0 10 <- [0x00e1500000 - 0x00e151ffff] size 0x00020000 gran 0x11 mem64 |
| PCI: 02:00.0 30 <- [0x00e1520000 - 0x00e152ffff] size 0x00010000 gran 0x10 romem |
| PCI: 00:1c.2 1c <- [0x000000ffff - 0x000000fffe] size 0x00000000 gran 0x0c bus 03 io |
| PCI: 00:1c.2 24 <- [0x00efffffff - 0x00effffffe] size 0x00000000 gran 0x14 bus 03 prefmem |
| PCI: 00:1c.2 20 <- [0x00efffffff - 0x00effffffe] size 0x00000000 gran 0x14 bus 03 mem |
| PCI: 00:1c.3 1c <- [0x0000002000 - 0x0000002fff] size 0x00001000 gran 0x0c bus 04 io |
| PCI: 00:1c.3 24 <- [0x00e0000000 - 0x00e07fffff] size 0x00800000 gran 0x14 bus 04 prefmem |
| PCI: 00:1c.3 20 <- [0x00e0800000 - 0x00e0ffffff] size 0x00800000 gran 0x14 bus 04 mem |
| NONE missing set_resources |
| PCI: 00:1d.0 20 <- [0x0000003080 - 0x000000309f] size 0x00000020 gran 0x05 io |
| PCI: 00:1d.1 20 <- [0x00000030a0 - 0x00000030bf] size 0x00000020 gran 0x05 io |
| PCI: 00:1d.2 20 <- [0x00000030c0 - 0x00000030df] size 0x00000020 gran 0x05 io |
| PCI: 00:1d.7 10 <- [0x00e1627000 - 0x00e16273ff] size 0x00000400 gran 0x0a mem |
| PCI: 00:1e.0 1c <- [0x000000ffff - 0x000000fffe] size 0x00000000 gran 0x0c bus 05 io |
| PCI: 00:1e.0 24 <- [0x00efffffff - 0x00effffffe] size 0x00000000 gran 0x14 bus 05 prefmem |
| PCI: 00:1e.0 20 <- [0x00efffffff - 0x00effffffe] size 0x00000000 gran 0x14 bus 05 mem |
| PNP: 00ff.1 missing set_resources |
| PNP: 00ff.2 missing set_resources |
| PNP: 164e.3 60 <- [0x0000000200 - 0x0000000207] size 0x00000008 gran 0x03 io |
| PNP: 164e.3 29 <- [0x00000000b0 - 0x00000000af] size 0x00000000 gran 0x00 irq |
| PNP: 164e.3 70 <- [0x0000000005 - 0x0000000005] size 0x00000001 gran 0x00 irq |
| PNP: 164e.3 f0 <- [0x0000000082 - 0x0000000081] size 0x00000000 gran 0x00 irq |
| PCI: 00:1f.2 10 <- [0x0000003408 - 0x000000340f] size 0x00000008 gran 0x03 io |
| PCI: 00:1f.2 14 <- [0x0000003418 - 0x000000341b] size 0x00000004 gran 0x02 io |
| PCI: 00:1f.2 18 <- [0x0000003410 - 0x0000003417] size 0x00000008 gran 0x03 io |
| PCI: 00:1f.2 1c <- [0x000000341c - 0x000000341f] size 0x00000004 gran 0x02 io |
| PCI: 00:1f.2 20 <- [0x00000030e0 - 0x00000030ff] size 0x00000020 gran 0x05 io |
| PCI: 00:1f.2 24 <- [0x00e1625000 - 0x00e16257ff] size 0x00000800 gran 0x0b mem |
| PCI: 00:1f.3 10 <- [0x00e1628000 - 0x00e16280ff] size 0x00000100 gran 0x08 mem64 |
| Done setting resources. |
| Done allocating resources. |
| BS: BS_DEV_RESOURCES times (us): entry 0 run 1493 exit 0 |
| Enabling resources... |
| PCI: 00:00.0 subsystem <- 17aa/20e0 |
| PCI: 00:00.0 cmd <- 06 |
| PCI: 00:02.0 subsystem <- 17aa/20e4 |
| PCI: 00:02.0 cmd <- 03 |
| PCI: 00:02.1 subsystem <- 17aa/20e4 |
| PCI: 00:02.1 cmd <- 02 |
| PCI: 00:19.0 subsystem <- 8086/10f5 |
| PCI: 00:19.0 cmd <- 103 |
| PCI: 00:1a.0 subsystem <- 17aa/20f0 |
| PCI: 00:1a.0 cmd <- 01 |
| PCI: 00:1a.1 subsystem <- 17aa/20f0 |
| PCI: 00:1a.1 cmd <- 01 |
| PCI: 00:1a.2 subsystem <- 17aa/20f0 |
| PCI: 00:1a.2 cmd <- 01 |
| PCI: 00:1a.7 subsystem <- 17aa/20f1 |
| PCI: 00:1a.7 cmd <- 106 |
| PCI: 00:1b.0 subsystem <- 17aa/20f2 |
| PCI: 00:1b.0 cmd <- 102 |
| PCI: 00:1c.0 bridge ctrl <- 0003 |
| PCI: 00:1c.0 subsystem <- 17aa/20f3 |
| PCI: 00:1c.0 cmd <- 100 |
| PCI: 00:1c.1 bridge ctrl <- 0003 |
| PCI: 00:1c.1 subsystem <- 17aa/20f3 |
| PCI: 00:1c.1 cmd <- 106 |
| PCI: 00:1c.2 bridge ctrl <- 0003 |
| PCI: 00:1c.2 subsystem <- 17aa/20f3 |
| PCI: 00:1c.2 cmd <- 100 |
| PCI: 00:1c.3 bridge ctrl <- 0003 |
| PCI: 00:1c.3 subsystem <- 17aa/20f3 |
| PCI: 00:1c.3 cmd <- 107 |
| PCI: 00:1d.0 subsystem <- 17aa/20f0 |
| PCI: 00:1d.0 cmd <- 01 |
| PCI: 00:1d.1 subsystem <- 17aa/20f0 |
| PCI: 00:1d.1 cmd <- 01 |
| PCI: 00:1d.2 subsystem <- 17aa/20f0 |
| PCI: 00:1d.2 cmd <- 01 |
| PCI: 00:1d.7 subsystem <- 17aa/20f1 |
| PCI: 00:1d.7 cmd <- 102 |
| PCI: 00:1e.0 bridge ctrl <- 0003 |
| PCI: 00:1e.0 subsystem <- 17aa/20f4 |
| PCI: 00:1e.0 cmd <- 100 |
| PCI: 00:1f.0 subsystem <- 17aa/20f5 |
| PCI: 00:1f.0 cmd <- 107 |
| PCI: 00:1f.2 subsystem <- 17aa/20f8 |
| PCI: 00:1f.2 cmd <- 03 |
| PCI: 00:1f.3 subsystem <- 17aa/20f9 |
| PCI: 00:1f.3 cmd <- 103 |
| PCI: 02:00.0 cmd <- 02 |
| done. |
| BS: BS_DEV_ENABLE times (us): entry 0 run 203 exit 0 |
| Initializing devices... |
| Root Device init ... |
| Root Device init finished in 1 usecs |
| CPU_CLUSTER: 0 init ... |
| CBFS: 'Master Header Locator' located CBFS at [10200:800000) |
| CBFS: Locating 'cpu_microcode_blob.bin' |
| CBFS: Found @ offset e440 size c000 |
| microcode: sig=0x1067a pf=0x80 revision=0x0 |
| microcode: updated to revision 0xa0b date=2010-09-28 |
| MTRR: Physical address space: |
| 0x0000000000000000 - 0x00000000000a0000 size 0x000a0000 type 6 |
| 0x00000000000a0000 - 0x00000000000c0000 size 0x00020000 type 0 |
| 0x00000000000c0000 - 0x000000007d800000 size 0x7d740000 type 6 |
| 0x000000007d800000 - 0x00000000d0000000 size 0x52800000 type 0 |
| 0x00000000d0000000 - 0x00000000e0000000 size 0x10000000 type 1 |
| 0x00000000e0000000 - 0x0000000100000000 size 0x20000000 type 0 |
| 0x0000000100000000 - 0x0000000280000000 size 0x180000000 type 6 |
| MTRR: Fixed MSR 0x250 0x0606060606060606 |
| MTRR: Fixed MSR 0x258 0x0606060606060606 |
| MTRR: Fixed MSR 0x259 0x0000000000000000 |
| MTRR: Fixed MSR 0x268 0x0606060606060606 |
| MTRR: Fixed MSR 0x269 0x0606060606060606 |
| MTRR: Fixed MSR 0x26a 0x0606060606060606 |
| MTRR: Fixed MSR 0x26b 0x0606060606060606 |
| MTRR: Fixed MSR 0x26c 0x0606060606060606 |
| MTRR: Fixed MSR 0x26d 0x0606060606060606 |
| MTRR: Fixed MSR 0x26e 0x0606060606060606 |
| MTRR: Fixed MSR 0x26f 0x0606060606060606 |
| CPU physical address size: 36 bits |
| MTRR: default type WB/UC MTRR counts: 6/6. |
| MTRR: UC selected as default type. |
| MTRR: 0 base 0x0000000000000000 mask 0x0000000f80000000 type 6 |
| MTRR: 1 base 0x000000007d800000 mask 0x0000000fff800000 type 0 |
| MTRR: 2 base 0x000000007e000000 mask 0x0000000ffe000000 type 0 |
| MTRR: 3 base 0x00000000d0000000 mask 0x0000000ff0000000 type 1 |
| MTRR: 4 base 0x0000000100000000 mask 0x0000000f00000000 type 6 |
| MTRR: 5 base 0x0000000200000000 mask 0x0000000f80000000 type 6 |
| |
| MTRR check |
| Fixed MTRRs : Enabled |
| Variable MTRRs: Enabled |
| |
| CPU has 2 cores. |
| Setting up SMI for CPU |
| Will perform SMM setup. |
| CPU: Intel(R) Core(TM)2 Duo CPU P8800 @ 2.66GHz. |
| Loading module at 00030000 with entry 00030000. filesize: 0x170 memsize: 0x170 |
| Processing 16 relocs. Offset value of 0x00030000 |
| Attempting to start 1 APs |
| Waiting for 10ms after sending INIT. |
| Waiting for 1st SIPI to complete...done. |
| Waiting for 2nd SIPI to complete...done. |
| AP: slot 1 apic_id 1. |
| Loading module at 00038000 with entry 00038000. filesize: 0x1a8 memsize: 0x1a8 |
| Processing 13 relocs. Offset value of 0x00038000 |
| SMM Module: stub loaded at 00038000. Will call 7d7a979f(00000000) |
| Installing SMM handler to 0x7da00000 |
| Loading module at 7da10000 with entry 7da103fe. filesize: 0xec8 memsize: 0x4ee8 |
| Processing 45 relocs. Offset value of 0x7da10000 |
| Loading module at 7da08000 with entry 7da08000. filesize: 0x1a8 memsize: 0x1a8 |
| Processing 13 relocs. Offset value of 0x7da08000 |
| SMM Module: placing jmp sequence at 7da07c00 rel16 0x03fd |
| SMM Module: stub loaded at 7da08000. Will call 7da103fe(00000000) |
| Initializing Southbridge SMI... |
| |
| New SMBASE 0x7da00000 |
| In relocation handler: cpu 0 |
| New SMBASE=0x7da00000 |
| Writing SMRR. base = 0x7da00000, mask=0xffe00800 |
| SMRR not enabled, skip writing SMRR... |
| Relocation complete. |
| VMX status: enabled |
| VMX status: enabled |
| New SMBASE 0x7d9ffc00 |
| In relocation handler: cpu 1 |
| New SMBASE=0x7d9ffc00 |
| Writing SMRR. base = 0x7da00000, mask=0xffe00800 |
| Relocation complete. |
| Initializing CPU #0 |
| CPU: vendor Intel device 1067a |
| CPU: family 06, model 17, stepping 0a |
| Enabling cache |
| CPU: Intel(R) Core(TM)2 Duo CPU P8800 @ 2.66GHz. |
| Setting up local APIC... |
| apic_id: 0x00 done. |
| writing P-State 2: 0, 0, 6, 0x17, 15000; encoded: 0x0617 |
| writing P-State 2: 0, 0, 6, 0x17, 15000; encoded: 0x0617 |
| writing P-State 2: 0, 0, 6, 0x17, 15000; encoded: 0x0617 |
| writing P-State 2: 0, 0, 6, 0x17, 15000; encoded: 0x0617 |
| writing P-State 1: 0, 0, 8, 0x1c, 25000; encoded: 0x081c |
| writing P-State 0: 0, 0, 10, 0x21, 35000; encoded: 0x0a21 |
| CPU #0 initialized |
| Initializing CPU #1 |
| CPU: vendor Intel device 1067a |
| CPU: family 06, model 17, stepping 0a |
| Enabling cache |
| CPU: Intel(R) Core(TM)2 Duo CPU P8800 @ 2.66GHz. |
| Setting up local APIC... |
| apic_id: 0x01 done. |
| writing P-State 3: 0, 0, 6, 0x17, 15000; encoded: 0x0617 |
| writing P-State 3: 0, 0, 6, 0x17, 15000; encoded: 0x0617 |
| writing P-State 3: 0, 0, 6, 0x17, 15000; encoded: 0x0617 |
| writing P-State 3: 0, 0, 6, 0x17, 15000; encoded: 0x0617 |
| writing P-State 2: 0, 0, 8, 0x1c, 25000; encoded: 0x081c |
| writing P-State 1: 0, 0, 10, 0x21, 35000; encoded: 0x0a21 |
| CPU #1 initialized |
| bsp_do_flight_plan done after 16111 msecs. |
| Initializing southbridge SMI... |
| SMI_STS: |
| GPE0_STS: GPIO13 GPIO11 GPIO10 GPIO5 GPIO4 GPIO3 GPIO2 GPIO0 |
| ALT_GP_SMI_STS: GPI14 GPI13 GPI11 GPI10 GPI5 GPI4 GPI3 GPI2 GPI1 GPI0 |
| TCO_STS: |
| Locking SMM. |
| CPU_CLUSTER: 0 init finished in 16134019 usecs |
| DOMAIN: 0000 init ... |
| DOMAIN: 0000 init finished in 1 usecs |
| PCI: 00:00.0 init ... |
| PCI: 00:00.0 init finished in 1 usecs |
| PCI: 00:02.0 init ... |
| LVDS EDID |
| WARNING: EDID block does NOT fully conform to EDID 1.3. |
| Missing name descriptor |
| Missing monitor ranges |
| Found EDID string: B121EW09 V3 in lookup table, pwm: 400Hz |
| |
| [16.206579] CONFIG => |
| [16.206581] (Primary => |
| [16.206582] (Port => Internal, |
| [16.206583] Framebuffer => |
| [16.206584] (Width => 640, |
| [16.206586] Height => 400, |
| [16.206588] Start_X => 0, |
| [16.206590] Start_Y => 0, |
| [16.206592] Stride => 1, |
| [16.206594] V_Stride => 1, |
| [16.206596] Tiling => Linear , |
| [16.206598] Rotation => No_Rotation, |
| [16.206600] Offset => 0xffffffff, |
| [16.206602] BPC => 8), |
| [16.206604] Mode => |
| [16.206605] (Dotclock => 69300000, |
| [16.206607] H_Visible => 1280, |
| [16.206609] H_Sync_Begin => 1328, |
| [16.206611] H_Sync_End => 1360, |
| [16.206613] H_Total => 1403, |
| [16.206615] V_Visible => 800, |
| [16.206617] V_Sync_Begin => 803, |
| [16.206619] V_Sync_End => 809, |
| [16.206621] V_Total => 821, |
| [16.206623] H_Sync_Active_High => False, |
| [16.206625] V_Sync_Active_High => False, |
| [16.206627] BPC => 5)), |
| [16.206629] Secondary => |
| [16.206630] (Port => Disabled, |
| [16.206631] Framebuffer => |
| [16.206632] (Width => 1, |
| [16.206634] Height => 1, |
| [16.206636] Start_X => 0, |
| [16.206638] Start_Y => 0, |
| [16.206640] Stride => 1, |
| [16.206642] V_Stride => 1, |
| [16.206644] Tiling => Linear , |
| [16.206646] Rotation => No_Rotation, |
| [16.206648] Offset => 0x00000000, |
| [16.206650] BPC => 8), |
| [16.206651] Mode => |
| [16.206652] (Dotclock => 19200000, |
| [16.206654] H_Visible => 1, |
| [16.206656] H_Sync_Begin => 1, |
| [16.206658] H_Sync_End => 1, |
| [16.206660] H_Total => 1, |
| [16.206662] V_Visible => 1, |
| [16.206664] V_Sync_Begin => 1, |
| [16.206666] V_Sync_End => 1, |
| [16.206668] V_Total => 1, |
| [16.206670] H_Sync_Active_High => False, |
| [16.206672] V_Sync_Active_High => False, |
| [16.206674] BPC => 5)), |
| [16.206676] Tertiary => |
| [16.206677] (Port => Disabled, |
| [16.206678] Framebuffer => |
| [16.206679] (Width => 1, |
| [16.206681] Height => 1, |
| [16.206683] Start_X => 0, |
| [16.206685] Start_Y => 0, |
| [16.206687] Stride => 1, |
| [16.206689] V_Stride => 1, |
| [16.206691] Tiling => Linear , |
| [16.206693] Rotation => No_Rotation, |
| [16.206695] Offset => 0x00000000, |
| [16.206697] BPC => 8), |
| [16.206698] Mode => |
| [16.206699] (Dotclock => 19200000, |
| [16.206701] H_Visible => 1, |
| [16.206703] H_Sync_Begin => 1, |
| [16.206705] H_Sync_End => 1, |
| [16.206707] H_Total => 1, |
| [16.206709] V_Visible => 1, |
| [16.206711] V_Sync_Begin => 1, |
| [16.206713] V_Sync_End => 1, |
| [16.206715] V_Total => 1, |
| [16.206717] H_Sync_Active_High => False, |
| [16.206719] V_Sync_Active_High => False, |
| [16.206721] BPC => 5))); |
| PCI: 00:02.0 init finished in 60293 usecs |
| PCI: 00:02.1 init ... |
| PCI: 00:02.1 init finished in 1 usecs |
| PCI: 00:19.0 init ... |
| PCI: 00:19.0 init finished in 1 usecs |
| PCI: 00:1a.0 init ... |
| PCI: 00:1a.0 init finished in 1 usecs |
| PCI: 00:1a.1 init ... |
| PCI: 00:1a.1 init finished in 1 usecs |
| PCI: 00:1a.2 init ... |
| PCI: 00:1a.2 init finished in 1 usecs |
| PCI: 00:1a.7 init ... |
| EHCI: Setting up controller.. done. |
| PCI: 00:1a.7 init finished in 5 usecs |
| PCI: 00:1b.0 init ... |
| Azalia: base = e1620000 |
| Azalia: codec_mask = 01 |
| HD Audio: Initializing codec #0 |
| Azalia: codec viddid: 14f15051 |
| Azalia: verb_size: 32 |
| Azalia: verb loaded. |
| PCI: 00:1b.0 init finished in 3740 usecs |
| PCI: 00:1c.0 init ... |
| Initializing ICH9 PCIe root port. |
| PCI: 00:1c.0 init finished in 17 usecs |
| PCI: 00:1c.1 init ... |
| Initializing ICH9 PCIe root port. |
| PCI: 00:1c.1 init finished in 16 usecs |
| PCI: 00:1c.2 init ... |
| Initializing ICH9 PCIe root port. |
| PCI: 00:1c.2 init finished in 16 usecs |
| PCI: 00:1c.3 init ... |
| Initializing ICH9 PCIe root port. |
| PCI: 00:1c.3 init finished in 18 usecs |
| PCI: 00:1d.0 init ... |
| PCI: 00:1d.0 init finished in 1 usecs |
| PCI: 00:1d.1 init ... |
| PCI: 00:1d.1 init finished in 1 usecs |
| PCI: 00:1d.2 init ... |
| PCI: 00:1d.2 init finished in 1 usecs |
| PCI: 00:1d.7 init ... |
| EHCI: Setting up controller.. done. |
| PCI: 00:1d.7 init finished in 4 usecs |
| PCI: 00:1e.0 init ... |
| PCI: 00:1e.0 init finished in 6 usecs |
| PCI: 00:1f.0 init ... |
| i82801ix: lpc_init |
| IOAPIC: Initializing IOAPIC at 0xfec00000 |
| IOAPIC: Bootstrap Processor Local APIC = 0x00 |
| IOAPIC: ID = 0x02 |
| IOAPIC: 24 interrupts |
| IOAPIC: Enabling interrupts on FSB |
| FMAP: area COREBOOT found @ 10200 (8322560 bytes) |
| CBFS: Locating 'cmos_layout.bin' |
| CBFS: Found @ offset 35140 size 680 |
| Set power off after power failure. |
| FMAP: area COREBOOT found @ 10200 (8322560 bytes) |
| CBFS: Locating 'cmos_layout.bin' |
| CBFS: Found @ offset 35140 size 680 |
| No CMOS option 'nmi'. |
| NMI sources disabled. |
| rtc_failed = 0x0 |
| RTC Init |
| Disabling ACPI via APMC: |
| done. |
| PCI: 00:1f.0 init finished in 1931 usecs |
| PCI: 00:1f.2 init ... |
| i82801ix_sata: initializing... |
| FMAP: area COREBOOT found @ 10200 (8322560 bytes) |
| CBFS: Locating 'cmos_layout.bin' |
| CBFS: Found @ offset 35140 size 680 |
| SATA controller in AHCI mode. |
| ABAR: e1625000 |
| PCI: 00:1f.2 init finished in 635 usecs |
| PCI: 00:1f.3 init ... |
| PCI: 00:1f.3 init finished in 5 usecs |
| PCI: 02:00.0 init ... |
| PCI: 02:00.0 init finished in 1 usecs |
| IOAPIC: 02 init ... |
| IOAPIC: Initializing IOAPIC at 0xfec00000 |
| IOAPIC: Bootstrap Processor Local APIC = 0x00 |
| IOAPIC: 23 interrupts |
| IOAPIC: Enabling interrupts on FSB |
| IOAPIC: 02 init finished in 36 usecs |
| PNP: 00ff.2 init ... |
| PNP: 00ff.2 init finished in 1 usecs |
| PNP: 164e.3 init ... |
| PNP: 164e.3 init finished in 1 usecs |
| smbus: PCI: 00:1f.3[0]->I2C: 01:54 init ... |
| I2C: 01:54 init finished in 3 usecs |
| smbus: PCI: 00:1f.3[0]->I2C: 01:55 init ... |
| I2C: 01:55 init finished in 3 usecs |
| smbus: PCI: 00:1f.3[0]->I2C: 01:56 init ... |
| I2C: 01:56 init finished in 3 usecs |
| smbus: PCI: 00:1f.3[0]->I2C: 01:57 init ... |
| I2C: 01:57 init finished in 3 usecs |
| smbus: PCI: 00:1f.3[0]->I2C: 01:5c init ... |
| Locking EEPROM RFID |
| init EEPROM done |
| I2C: 01:5c init finished in 28640 usecs |
| smbus: PCI: 00:1f.3[0]->I2C: 01:5d init ... |
| I2C: 01:5d init finished in 3 usecs |
| smbus: PCI: 00:1f.3[0]->I2C: 01:5e init ... |
| I2C: 01:5e init finished in 3 usecs |
| smbus: PCI: 00:1f.3[0]->I2C: 01:5f init ... |
| I2C: 01:5f init finished in 3 usecs |
| Devices initialized |
| BS: BS_DEV_INIT times (us): entry 6 run 16229542 exit 0 |
| Finalize devices... |
| Devices finalized |
| BS: BS_POST_DEVICE times (us): entry 0 run 4 exit 0 |
| BS: BS_OS_RESUME_CHECK times (us): entry 0 run 1 exit 0 |
| Writing ISA IRQs |
| no IRQ found for PCI: 00:00.0 |
| fixed IRQ entry for: PCI: 00:02.0: INTA# -> IOAPIC 2 PIN 16 |
| no IRQ found for PCI: 00:02.1 |
| no IRQ found for PCI: 00:19.0 |
| fixed IRQ entry for: PCI: 00:1a.0: INTA# -> IOAPIC 2 PIN 16 |
| fixed IRQ entry for: PCI: 00:1a.1: INTB# -> IOAPIC 2 PIN 17 |
| fixed IRQ entry for: PCI: 00:1a.2: INTC# -> IOAPIC 2 PIN 18 |
| fixed IRQ entry for: PCI: 00:1a.7: INTC# -> IOAPIC 2 PIN 18 |
| fixed IRQ entry for: PCI: 00:1b.0: INTA# -> IOAPIC 2 PIN 16 |
| fixed IRQ entry for: PCI: 00:1c.0: INTA# -> IOAPIC 2 PIN 16 |
| no IRQ found for PCI: 00:1c.1 |
| no IRQ found for PCI: 00:1c.2 |
| no IRQ found for PCI: 00:1c.3 |
| fixed IRQ entry for: PCI: 00:1d.0: INTA# -> IOAPIC 2 PIN 16 |
| fixed IRQ entry for: PCI: 00:1d.1: INTB# -> IOAPIC 2 PIN 17 |
| fixed IRQ entry for: PCI: 00:1d.2: INTC# -> IOAPIC 2 PIN 18 |
| fixed IRQ entry for: PCI: 00:1d.7: INTA# -> IOAPIC 2 PIN 16 |
| no IRQ found for PCI: 00:1e.0 |
| no IRQ found for PCI: 00:1f.0 |
| fixed IRQ entry for: PCI: 00:1f.2: INTB# -> IOAPIC 2 PIN 17 |
| fixed IRQ entry for: PCI: 00:1f.3: INTC# -> IOAPIC 2 PIN 18 |
| no IRQ found for PCI: 02:00.0 |
| Wrote the mp table end at: 000f0010 - 000f0194 |
| MPTABLE len: 404 |
| Writing ISA IRQs |
| no IRQ found for PCI: 00:00.0 |
| fixed IRQ entry for: PCI: 00:02.0: INTA# -> IOAPIC 2 PIN 16 |
| no IRQ found for PCI: 00:02.1 |
| no IRQ found for PCI: 00:19.0 |
| fixed IRQ entry for: PCI: 00:1a.0: INTA# -> IOAPIC 2 PIN 16 |
| fixed IRQ entry for: PCI: 00:1a.1: INTB# -> IOAPIC 2 PIN 17 |
| fixed IRQ entry for: PCI: 00:1a.2: INTC# -> IOAPIC 2 PIN 18 |
| fixed IRQ entry for: PCI: 00:1a.7: INTC# -> IOAPIC 2 PIN 18 |
| fixed IRQ entry for: PCI: 00:1b.0: INTA# -> IOAPIC 2 PIN 16 |
| fixed IRQ entry for: PCI: 00:1c.0: INTA# -> IOAPIC 2 PIN 16 |
| no IRQ found for PCI: 00:1c.1 |
| no IRQ found for PCI: 00:1c.2 |
| no IRQ found for PCI: 00:1c.3 |
| fixed IRQ entry for: PCI: 00:1d.0: INTA# -> IOAPIC 2 PIN 16 |
| fixed IRQ entry for: PCI: 00:1d.1: INTB# -> IOAPIC 2 PIN 17 |
| fixed IRQ entry for: PCI: 00:1d.2: INTC# -> IOAPIC 2 PIN 18 |
| fixed IRQ entry for: PCI: 00:1d.7: INTA# -> IOAPIC 2 PIN 16 |
| no IRQ found for PCI: 00:1e.0 |
| no IRQ found for PCI: 00:1f.0 |
| fixed IRQ entry for: PCI: 00:1f.2: INTB# -> IOAPIC 2 PIN 17 |
| fixed IRQ entry for: PCI: 00:1f.3: INTC# -> IOAPIC 2 PIN 18 |
| no IRQ found for PCI: 02:00.0 |
| Wrote the mp table end at: 7d772010 - 7d772194 |
| MPTABLE len: 404 |
| MP table: 404 bytes. |
| CBFS: 'Master Header Locator' located CBFS at [10200:800000) |
| CBFS: Locating 'fallback/dsdt.aml' |
| CBFS: Found @ offset 3a300 size 3aa4 |
| CBFS: 'Master Header Locator' located CBFS at [10200:800000) |
| CBFS: Locating 'fallback/slic' |
| CBFS: 'fallback/slic' not found. |
| ACPI: Writing ACPI tables at 7d74e000. |
| ACPI: * FACS |
| ACPI: * DSDT |
| ACPI: * FADT |
| ACPI: added table 1/32, length now 40 |
| ACPI: * SSDT |
| Super I/O probe failed, skipping wacom |
| Found 1 CPU(s) with 2 core(s) each. |
| clocks between 800 and 2800 MHz. |
| adding 5 P-States between busratio 6 and a, incl. P0 |
| PSS: 2667MHz power 35000 control 0x4a2b status 0x4a2b |
| PSS: 2666MHz power 35000 control 0xa21 status 0xa21 |
| PSS: 2133MHz power 25000 control 0x81c status 0x81c |
| PSS: 1600MHz power 15000 control 0x617 status 0x617 |
| PSS: 800MHz power 12000 control 0x860d status 0x860d |
| clocks between 800 and 2800 MHz. |
| adding 5 P-States between busratio 6 and a, incl. P0 |
| PSS: 2667MHz power 35000 control 0x4a2b status 0x4a2b |
| PSS: 2666MHz power 35000 control 0xa21 status 0xa21 |
| PSS: 2133MHz power 25000 control 0x81c status 0x81c |
| PSS: 1600MHz power 15000 control 0x617 status 0x617 |
| PSS: 800MHz power 12000 control 0x860d status 0x860d |
| Generating ACPI PIRQ entries |
| ACPI: * H8 |
| H8: BDC installed |
| H8: WWAN detection not implemented. Assuming WWAN installed |
| ACPI: added table 2/32, length now 44 |
| ACPI: * MCFG |
| ACPI: added table 3/32, length now 48 |
| ACPI: * MADT |
| ACPI: added table 4/32, length now 52 |
| current = 7d7528b0 |
| ACPI: * DMAR |
| ACPI: added table 5/32, length now 56 |
| current = 7d752930 |
| GMA: Using LED backlight VBT |
| CBFS: 'Master Header Locator' located CBFS at [10200:800000) |
| CBFS: Locating 'data_led.vbt' |
| CBFS: Found @ offset 3e440 size 59f |
| Found a VBT of 3863 bytes after decompression |
| GMA: Found VBT in CBFS |
| GMA: Found valid VBT in CBFS |
| ACPI: * HPET |
| ACPI: added table 6/32, length now 60 |
| ACPI: done. |
| ACPI tables: 26992 bytes. |
| smbios_write_tables: 7d74d000 |
| SMBIOS tables: 683 bytes. |
| Writing table forward entry at 0x00000500 |
| Wrote coreboot table at: 00000500, 0x10 bytes, checksum 5267 |
| Writing coreboot table at 0x7d773000 |
| CBFS: 'Master Header Locator' located CBFS at [10200:800000) |
| CBFS: Locating 'cmos_layout.bin' |
| CBFS: Found @ offset 35140 size 680 |
| 0. 0000000000000000-0000000000000fff: CONFIGURATION TABLES |
| 1. 0000000000001000-000000000009ffff: RAM |
| 2. 00000000000c0000-000000007d74cfff: RAM |
| 3. 000000007d74d000-000000007d78bfff: CONFIGURATION TABLES |
| 4. 000000007d78c000-000000007d7d1fff: RAMSTAGE |
| 5. 000000007d7d2000-000000007d7fffff: CONFIGURATION TABLES |
| 6. 000000007d800000-000000007fffffff: RESERVED |
| 7. 00000000f0000000-00000000f3ffffff: RESERVED |
| 8. 0000000100000000-000000027fffffff: RAM |
| Manufacturer: c2 |
| SF: Detected MX25L6405D with sector size 0x1000, total 0x800000 |
| CBFS: 'Master Header Locator' located CBFS at [10200:800000) |
| Wrote coreboot table at: 7d773000, 0x998 bytes, checksum 5f38 |
| coreboot table: 2480 bytes. |
| IMD ROOT 0. 7d7ff000 00001000 |
| IMD SMALL 1. 7d7fe000 00001000 |
| CONSOLE 2. 7d7de000 00020000 |
| TIME STAMP 3. 7d7dd000 00000910 |
| ROMSTG STCK 4. 7d7dc000 00001000 |
| AFTER CAR 5. 7d7d2000 0000a000 |
| RAMSTAGE 6. 7d78b000 00047000 |
| SMM BACKUP 7. 7d77b000 00010000 |
| COREBOOT 8. 7d773000 00008000 |
| SMP TABLE 9. 7d772000 00001000 |
| ACPI 10. 7d74e000 00024000 |
| SMBIOS 11. 7d74d000 00000800 |
| IMD small region: |
| IMD ROOT 0. 7d7fec00 00000400 |
| USBDEBUG 1. 7d7feba0 00000050 |
| ROMSTAGE 2. 7d7feb80 00000004 |
| ACPI GNVS 3. 7d7fea80 00000100 |
| COREBOOTFWD 4. 7d7fea40 00000028 |
| BS: BS_WRITE_TABLES times (us): entry 0 run 28427 exit 0 |
| CBFS: 'Master Header Locator' located CBFS at [10200:800000) |
| CBFS: Locating 'fallback/payload' |
| CBFS: Found @ offset 3ea40 size 97345 |
| Checking segment from ROM address 0xff84ec78 |
| Checking segment from ROM address 0xff84ec94 |
| Checking segment from ROM address 0xff84ecb0 |
| Loading segment from ROM address 0xff84ec78 |
| code (compression=1) |
| New segment dstaddr 0x00008200 memsize 0x1b768 srcaddr 0xff84eccc filesize 0x98cf |
| Loading Segment: addr: 0x00008200 memsz: 0x000000000001b768 filesz: 0x00000000000098cf |
| using LZMA |
| Clearing Segment: addr: 0x000000000001bf23 memsz: 0x0000000000007a45 |
| Loading segment from ROM address 0xff84ec94 |
| code (compression=1) |
| New segment dstaddr 0x00100000 memsize 0x1fc248 srcaddr 0xff85859b filesize 0x8da22 |
| Loading Segment: addr: 0x00100000 memsz: 0x00000000001fc248 filesz: 0x000000000008da22 |
| using LZMA |
| Loading segment from ROM address 0xff84ecb0 |
| Entry Point 0x00008200 |
| BS: BS_PAYLOAD_LOAD times (us): entry 0 run 292241 exit 0 |
| ICH-NM10-PCH: watchdog disabled |
| Jumping to boot code at 00008200(7d773000) |
| error: no suitable video mode found. |
|
error: no video mode activated. |
|
error: file `/dejavusansmono.pf2' not found. |
|
error: file `/boot/grub/layouts/usqwerty.gkb' not found. |
|
GNU GRUB version 2.02 |
|
|
|
+----------------------------------------------------------------------------+||||||||||||||||||||||||+----------------------------------------------------------------------------+ Use the ^ and v keys to select which entry is highlighted. |
|
Press enter to boot the selected OS, `e' to edit the commands |
|
before booting or `c' for a command-line. *Load Operating System (incl. fully encrypted disks) [o] ? Search ISOLINUX menu (AHCI) [a] ? Search ISOLINUX menu (USB) [u] ? Search ISOLINUX menu (CD/DVD) [d] ? Load test configuration (grubtest.cfg) inside of CBFS [t] ? Search for GRUB2 configuration on external media [s] ? Poweroff [p] ? Reboot [r] ? ? ? ? ? The highlighted entry will be executed automatically in 1s. Load Operating System (incl. fully encrypted disks) [o] ?*Search ISOLINUX menu (AHCI) [a] ? Search ISOLINUX menu (AHCI) [a] ?*Load Operating System (incl. fully encrypted disks) [o] ?error: file `/boot/grub/fonts/unicode.pf2' not found. |
|
error: no suitable video mode found. |
|
GNU GRUB version 2.02 |
|
|
|
+----------------------------------------------------------------------------+||||||||||||||||||||||+----------------------------------------------------------------------------+ Use the ^ and v keys to select which entry is highlighted. |
|
Press enter to boot the selected OS, `e' to edit the commands |
|
before booting or `c' for a command-line. ESC to return |
|
previous menu. *Gentoo GNU/Linux ? Advanced options for Gentoo GNU/Linux ? ? ? ? ? ? ? ? ? ? The highlighted entry will be executed automatically in 3s. Loading Linux 5.2.2-gentoo ... |
|
Loading initial ramdisk ... |
|
|