| |
| |
| coreboot-4.9-1212-g3eebb16c05-dirty Wed Apr 3 16:57:19 UTC 2019 romstage starting (log level: 7)... |
| WARNING: Ignoring S4-assertion-width violation. |
| Stepping B3 |
| SMBus controller enabled. |
| 0:50:b |
| 2:51:b |
| Changing memory frequency: old 3, new 6. |
| Setting IGD memory frequencies for VCO #1. |
| Memory configured in dual-channel assymetric mode. |
| JEDEC init @0x00000000 |
| JEDEC init @0x08000000 |
| JEDEC init @0x10000000 |
| JEDEC init @0x18000000 |
| group 0, ch 0: 6.1.0.4.3 |
| group 1, ch 0: 6.0.2.7.6 |
| group 2, ch 0: 6.1.2.2.7 |
| group 3, ch 0: 6.1.0.7.5 |
| group 0, ch 1: 6.1.0.0.2 |
| group 1, ch 1: 6.0.2.5.1 |
| group 2, ch 1: 6.1.2.0.2 |
| group 3, ch 1: 6.1.0.6.0 |
| byte lane 0, ch 0: 4.5 |
| byte lane 1, ch 0: 5.3 |
| byte lane 2, ch 0: 5.1 |
| byte lane 3, ch 0: 4.2 |
| byte lane 4, ch 0: 4.3 |
| byte lane 5, ch 0: 4.5 |
| byte lane 6, ch 0: 3.7 |
| byte lane 7, ch 0: 5.2 |
| byte lane 0, ch 1: 4.2 |
| byte lane 1, ch 1: 5.1 |
| byte lane 2, ch 1: 4.5 |
| byte lane 3, ch 1: 4.3 |
| byte lane 4, ch 1: 4.7 |
| byte lane 5, ch 1: 4.5 |
| byte lane 6, ch 1: 4.1 |
| byte lane 7, ch 1: 5.1 |
| group 0, ch 0: 1.11.0 |
| group 1, ch 0: 1.9.5 |
| group 2, ch 0: 2.4.5 |
| group 3, ch 0: 2.8.4 |
| FMAP: Found "FLASH" version 1.1 at 10000. |
| FMAP: base = ff800000 size = 800000 #areas = 3 |
| FMAP: area COREBOOT found @ 10200 (8322560 bytes) |
| CBFS: Locating 'cmos_layout.bin' |
| CBFS: Found @ offset 332c0 size 680 |
| IGD decoded, subtracting 32M UMA and 4M GTT |
| Memory configured in dual-channel interleaved mode. |
| Enabling IGD. |
| Finally disabling PEG in favor of IGD. |
| PEG x1 disabled, SDVO disabled |
| ICH9 waits for VC1 negotiation... done. |
| ICH9 waits for port arbitration table update... done. |
| CBMEM: |
| IMD: root @ 7d7ff000 254 entries. |
| IMD: root @ 7d7fec00 62 entries. |
| External stage cache: |
| IMD: root @ 7dbff000 254 entries. |
| IMD: root @ 7dbfec00 62 entries. |
| MTRR Range: Start=ff800000 End=0 (Size 800000) |
| MTRR Range: Start=0 End=1000000 (Size 1000000) |
| MTRR Range: Start=7d000000 End=7d800000 (Size 800000) |
| MTRR Range: Start=7da00000 End=7dc00000 (Size 200000) |
| CBFS: 'Master Header Locator' located CBFS at [10200:800000) |
| CBFS: Locating 'fallback/postcar' |
| CBFS: Found @ offset 33980 size 4848 |
| Decompressing stage fallback/postcar @ 0x7d7cefc0 (35056 bytes) |
| Loading module at 7d7cf000 with entry 7d7cf000. filesize: 0x4590 memsize: 0x88b0 |
| Processing 151 relocs. Offset value of 0x7b7cf000 |
| |
| |
| coreboot-4.9-1212-g3eebb16c05-dirty Wed Apr 3 16:57:19 UTC 2019 postcar starting (log level: 7)... |
| usbdebug: Failed hardware init |
| CBFS: 'Master Header Locator' located CBFS at [10200:800000) |
| CBFS: Locating 'fallback/ramstage' |
| CBFS: Found @ offset 1ae40 size 17dc8 |
| Decompressing stage fallback/ramstage @ 0x7d78dfc0 (258392 bytes) |
| Loading module at 7d78e000 with entry 7d78e000. filesize: 0x30cc8 memsize: 0x3f118 |
| Processing 3151 relocs. Offset value of 0x7c98e000 |
| |
| |
| coreboot-4.9-1212-g3eebb16c05-dirty Wed Apr 3 16:57:19 UTC 2019 ramstage starting (log level: 7)... |
| usbdebug: Failed hardware init |
| Normal boot. |
| apic timer freq (266) may be too fast. |
| BS: BS_PRE_DEVICE times (us): entry 0 run 1 exit 0 |
| Initializing i82801ix southbridge... |
| BS: BS_DEV_INIT_CHIPS times (us): entry 0 run 74 exit 0 |
| Enumerating buses... |
| CPU_CLUSTER: 0 enabled |
| DOMAIN: 0000 enabled |
| PCI: pci_scan_bus for bus 00 |
| PCI: 00:00.0 [8086/2a40] enabled |
| PCI: 00:02.0 [8086/2a42] enabled |
| PCI: 00:02.1 [8086/2a43] enabled |
| PCI: Static device PCI: 00:03.0 not found, disabling it. |
| PCI: 00:19.0 [8086/10f5] enabled |
| PCI: 00:1a.0 [8086/2937] enabled |
| PCI: 00:1a.1 [8086/2938] enabled |
| PCI: 00:1a.2 [8086/2939] enabled |
| PCI: 00:1a.7 [8086/293c] enabled |
| PCI: 00:1b.0 [8086/293e] enabled |
| PCI: 00:1c.0 [8086/2940] enabled |
| PCI: 00:1c.1 [8086/2942] enabled |
| PCI: 00:1c.2 [8086/2944] enabled |
| PCI: 00:1c.3 [8086/2946] enabled |
| PCI: 00:1d.0 [8086/2934] enabled |
| PCI: 00:1d.1 [8086/2935] enabled |
| PCI: 00:1d.2 [8086/2936] enabled |
| PCI: 00:1d.7 [8086/293a] enabled |
| PCI: 00:1e.0 [8086/2448] enabled |
| PCI: 00:1f.0 [8086/2917] enabled |
| FMAP: area COREBOOT found @ 10200 (8322560 bytes) |
| CBFS: Locating 'cmos_layout.bin' |
| CBFS: Found @ offset 332c0 size 680 |
| PCI: 00:1f.2 [8086/2928] enabled |
| PCI: 00:1f.3 [8086/2930] enabled |
| PCI: Leftover static devices: |
| PCI: 00:03.0 |
| PCI: 00:03.1 |
| PCI: 00:03.2 |
| PCI: 00:03.3 |
| PCI: 00:1c.4 |
| PCI: 00:1c.5 |
| PCI: 00:1f.5 |
| PCI: 00:1f.6 |
| PCI: Check your devicetree.cb. |
| PCI: pci_scan_bus for bus 01 |
| scan_bus: scanning of bus PCI: 00:1c.0 took 35 usecs |
| PCI: pci_scan_bus for bus 02 |
| PCI: 02:00.0 [168c/0034] enabled |
| Failed to enable LTR for dev = PCI: 02:00.0 |
| scan_bus: scanning of bus PCI: 00:1c.1 took 66 usecs |
| PCI: pci_scan_bus for bus 03 |
| scan_bus: scanning of bus PCI: 00:1c.2 took 35 usecs |
| PCI: pci_scan_bus for bus 04 |
| scan_bus: scanning of bus PCI: 00:1c.3 took 35 usecs |
| PCI: pci_scan_bus for bus 05 |
| scan_bus: scanning of bus PCI: 00:1e.0 took 47 usecs |
| IOAPIC: 02 enabled |
| FMAP: area COREBOOT found @ 10200 (8322560 bytes) |
| CBFS: Locating 'cmos_layout.bin' |
| CBFS: Found @ offset 332c0 size 680 |
| No CMOS option 'touchpad'. |
| FMAP: area COREBOOT found @ 10200 (8322560 bytes) |
| CBFS: Locating 'cmos_layout.bin' |
| CBFS: Found @ offset 332c0 size 680 |
| PMH7: ID 03 Revision 10 |
| PNP: 00ff.1 enabled |
| EC Firmware ID 7XHT25WW-3.6, Version 7.01A |
| FMAP: area COREBOOT found @ 10200 (8322560 bytes) |
| CBFS: Locating 'cmos_layout.bin' |
| CBFS: Found @ offset 332c0 size 680 |
| FMAP: area COREBOOT found @ 10200 (8322560 bytes) |
| CBFS: Locating 'cmos_layout.bin' |
| CBFS: Found @ offset 332c0 size 680 |
| FMAP: area COREBOOT found @ 10200 (8322560 bytes) |
| CBFS: Locating 'cmos_layout.bin' |
| CBFS: Found @ offset 332c0 size 680 |
| No CMOS option 'usb_always_on'. |
| FMAP: area COREBOOT found @ 10200 (8322560 bytes) |
| CBFS: Locating 'cmos_layout.bin' |
| CBFS: Found @ offset 332c0 size 680 |
| FMAP: area COREBOOT found @ 10200 (8322560 bytes) |
| CBFS: Locating 'cmos_layout.bin' |
| CBFS: Found @ offset 332c0 size 680 |
| H8: BDC installed |
| FMAP: area COREBOOT found @ 10200 (8322560 bytes) |
| CBFS: Locating 'cmos_layout.bin' |
| CBFS: Found @ offset 332c0 size 680 |
| H8: WWAN detection not implemented. Assuming WWAN installed |
| FMAP: area COREBOOT found @ 10200 (8322560 bytes) |
| CBFS: Locating 'cmos_layout.bin' |
| CBFS: Found @ offset 332c0 size 680 |
| FMAP: area COREBOOT found @ 10200 (8322560 bytes) |
| CBFS: Locating 'cmos_layout.bin' |
| CBFS: Found @ offset 332c0 size 680 |
| FMAP: area COREBOOT found @ 10200 (8322560 bytes) |
| CBFS: Locating 'cmos_layout.bin' |
| CBFS: Found @ offset 332c0 size 680 |
| FMAP: area COREBOOT found @ 10200 (8322560 bytes) |
| CBFS: Locating 'cmos_layout.bin' |
| CBFS: Found @ offset 332c0 size 680 |
| FMAP: area COREBOOT found @ 10200 (8322560 bytes) |
| CBFS: Locating 'cmos_layout.bin' |
| CBFS: Found @ offset 332c0 size 680 |
| dock is not connected |
| PNP: 00ff.2 enabled |
| PNP: 164e.3 enabled |
| PNP: 164e.2 disabled |
| PNP: 164e.7 disabled |
| PNP: 164e.19 disabled |
| scan_bus: scanning of bus PCI: 00:1f.0 took 10007 usecs |
| bus: PCI: 00:1f.3[0]->I2C: 01:54 enabled |
| bus: PCI: 00:1f.3[0]->I2C: 01:55 enabled |
| bus: PCI: 00:1f.3[0]->I2C: 01:56 enabled |
| bus: PCI: 00:1f.3[0]->I2C: 01:57 enabled |
| bus: PCI: 00:1f.3[0]->I2C: 01:5c enabled |
| bus: PCI: 00:1f.3[0]->I2C: 01:5d enabled |
| bus: PCI: 00:1f.3[0]->I2C: 01:5e enabled |
| bus: PCI: 00:1f.3[0]->I2C: 01:5f enabled |
| scan_bus: scanning of bus PCI: 00:1f.3 took 25 usecs |
| scan_bus: scanning of bus DOMAIN: 0000 took 10741 usecs |
| scan_bus: scanning of bus Root Device took 10747 usecs |
| done |
| BS: BS_DEV_ENUMERATE times (us): entry 0 run 10776 exit 0 |
| found VGA at PCI: 00:02.0 |
| Setting up VGA for PCI: 00:02.0 |
| Setting PCI_BRIDGE_CTL_VGA for bridge DOMAIN: 0000 |
| Setting PCI_BRIDGE_CTL_VGA for bridge Root Device |
| Allocating resources... |
| Reading resources... |
| TOUUD 0x280000000 TOLUD 0x80000000 TOM 0x200000000 |
| IGD decoded, subtracting 32M UMA, 4M GTT and 2M TSEG |
| Unused RAM between cbmem_top and TOM: 0x800K |
| Available memory below 4GB: 2008M |
| Available memory above 4GB: 6144M |
| Adding UMA memory area base=0x7d800000 size=0x2800000 |
| Adding PCIe config bar base=0xf0000000 size=0x4000000 |
| PCI: 00:1a.7 EHCI BAR hook registered |
| More than one caller of pci_ehci_read_resources from PCI: 00:1d.7 |
| PNP: 00ff.1 missing read_resources |
| PNP: 00ff.2 missing read_resources |
| Done reading resources. |
| skipping PNP: 00ff.2@60 fixed resource, size=0! |
| skipping PNP: 00ff.2@62 fixed resource, size=0! |
| skipping PNP: 00ff.2@64 fixed resource, size=0! |
| skipping PNP: 00ff.2@66 fixed resource, size=0! |
| skipping PNP: 164e.3@29 fixed resource, size=0! |
| skipping PNP: 164e.3@f0 fixed resource, size=0! |
| Setting resources... |
| DOMAIN: 0000 03 <- [0x0000000000 - 0x000009ffff] size 0x000a0000 gran 0x00 mem |
| DOMAIN: 0000 04 <- [0x00000c0000 - 0x007d7fffff] size 0x7d740000 gran 0x00 mem |
| DOMAIN: 0000 05 <- [0x0100000000 - 0x027fffffff] size 0x180000000 gran 0x00 mem |
| DOMAIN: 0000 06 <- [0x007d800000 - 0x007fffffff] size 0x02800000 gran 0x00 mem |
| DOMAIN: 0000 07 <- [0x00f0000000 - 0x00f3ffffff] size 0x04000000 gran 0x00 mem |
| PCI: 00:02.0 10 <- [0x00e1000000 - 0x00e13fffff] size 0x00400000 gran 0x16 mem64 |
| PCI: 00:02.0 18 <- [0x00d0000000 - 0x00dfffffff] size 0x10000000 gran 0x1c prefmem64 |
| PCI: 00:02.0 20 <- [0x0000003400 - 0x0000003407] size 0x00000008 gran 0x03 io |
| PCI: 00:02.1 10 <- [0x00e1400000 - 0x00e14fffff] size 0x00100000 gran 0x14 mem64 |
| PCI: 00:19.0 10 <- [0x00e1600000 - 0x00e161ffff] size 0x00020000 gran 0x11 mem |
| PCI: 00:19.0 14 <- [0x00e1624000 - 0x00e1624fff] size 0x00001000 gran 0x0c mem |
| PCI: 00:19.0 18 <- [0x0000003000 - 0x000000301f] size 0x00000020 gran 0x05 io |
| PCI: 00:1a.0 20 <- [0x0000003020 - 0x000000303f] size 0x00000020 gran 0x05 io |
| PCI: 00:1a.1 20 <- [0x0000003040 - 0x000000305f] size 0x00000020 gran 0x05 io |
| PCI: 00:1a.2 20 <- [0x0000003060 - 0x000000307f] size 0x00000020 gran 0x05 io |
| PCI: 00:1a.7 EHCI Debug Port hook triggered |
| PCI: 00:1a.7 10 <- [0x00e1626000 - 0x00e16263ff] size 0x00000400 gran 0x0a mem |
| PCI: 00:1a.7 10 <- [0x00e1626000 - 0x00e16263ff] size 0x00000400 gran 0x0a mem |
| PCI: 00:1a.7 EHCI Debug Port relocated |
| PCI: 00:1b.0 10 <- [0x00e1620000 - 0x00e1623fff] size 0x00004000 gran 0x0e mem64 |
| PCI: 00:1c.0 1c <- [0x000000ffff - 0x000000fffe] size 0x00000000 gran 0x0c bus 01 io |
| PCI: 00:1c.0 24 <- [0x00efffffff - 0x00effffffe] size 0x00000000 gran 0x14 bus 01 prefmem |
| PCI: 00:1c.0 20 <- [0x00efffffff - 0x00effffffe] size 0x00000000 gran 0x14 bus 01 mem |
| PCI: 00:1c.1 1c <- [0x000000ffff - 0x000000fffe] size 0x00000000 gran 0x0c bus 02 io |
| PCI: 00:1c.1 24 <- [0x00efffffff - 0x00effffffe] size 0x00000000 gran 0x14 bus 02 prefmem |
| PCI: 00:1c.1 20 <- [0x00e1500000 - 0x00e15fffff] size 0x00100000 gran 0x14 bus 02 mem |
| PCI: 02:00.0 10 <- [0x00e1500000 - 0x00e157ffff] size 0x00080000 gran 0x13 mem64 |
| PCI: 02:00.0 30 <- [0x00e1580000 - 0x00e158ffff] size 0x00010000 gran 0x10 romem |
| PCI: 00:1c.2 1c <- [0x000000ffff - 0x000000fffe] size 0x00000000 gran 0x0c bus 03 io |
| PCI: 00:1c.2 24 <- [0x00efffffff - 0x00effffffe] size 0x00000000 gran 0x14 bus 03 prefmem |
| PCI: 00:1c.2 20 <- [0x00efffffff - 0x00effffffe] size 0x00000000 gran 0x14 bus 03 mem |
| PCI: 00:1c.3 1c <- [0x0000002000 - 0x0000002fff] size 0x00001000 gran 0x0c bus 04 io |
| PCI: 00:1c.3 24 <- [0x00e0000000 - 0x00e07fffff] size 0x00800000 gran 0x14 bus 04 prefmem |
| PCI: 00:1c.3 20 <- [0x00e0800000 - 0x00e0ffffff] size 0x00800000 gran 0x14 bus 04 mem |
| NONE missing set_resources |
| PCI: 00:1d.0 20 <- [0x0000003080 - 0x000000309f] size 0x00000020 gran 0x05 io |
| PCI: 00:1d.1 20 <- [0x00000030a0 - 0x00000030bf] size 0x00000020 gran 0x05 io |
| PCI: 00:1d.2 20 <- [0x00000030c0 - 0x00000030df] size 0x00000020 gran 0x05 io |
| PCI: 00:1d.7 10 <- [0x00e1627000 - 0x00e16273ff] size 0x00000400 gran 0x0a mem |
| PCI: 00:1e.0 1c <- [0x000000ffff - 0x000000fffe] size 0x00000000 gran 0x0c bus 05 io |
| PCI: 00:1e.0 24 <- [0x00efffffff - 0x00effffffe] size 0x00000000 gran 0x14 bus 05 prefmem |
| PCI: 00:1e.0 20 <- [0x00efffffff - 0x00effffffe] size 0x00000000 gran 0x14 bus 05 mem |
| PNP: 00ff.1 missing set_resources |
| PNP: 00ff.2 missing set_resources |
| PNP: 164e.3 60 <- [0x0000000200 - 0x0000000207] size 0x00000008 gran 0x03 io |
| PNP: 164e.3 29 <- [0x00000000b0 - 0x00000000af] size 0x00000000 gran 0x00 irq |
| PNP: 164e.3 70 <- [0x0000000005 - 0x0000000005] size 0x00000001 gran 0x00 irq |
| PNP: 164e.3 f0 <- [0x0000000082 - 0x0000000081] size 0x00000000 gran 0x00 irq |
| PCI: 00:1f.2 10 <- [0x0000003408 - 0x000000340f] size 0x00000008 gran 0x03 io |
| PCI: 00:1f.2 14 <- [0x0000003418 - 0x000000341b] size 0x00000004 gran 0x02 io |
| PCI: 00:1f.2 18 <- [0x0000003410 - 0x0000003417] size 0x00000008 gran 0x03 io |
| PCI: 00:1f.2 1c <- [0x000000341c - 0x000000341f] size 0x00000004 gran 0x02 io |
| PCI: 00:1f.2 20 <- [0x00000030e0 - 0x00000030ff] size 0x00000020 gran 0x05 io |
| PCI: 00:1f.2 24 <- [0x00e1625000 - 0x00e16257ff] size 0x00000800 gran 0x0b mem |
| PCI: 00:1f.3 10 <- [0x00e1628000 - 0x00e16280ff] size 0x00000100 gran 0x08 mem64 |
| Done setting resources. |
| Done allocating resources. |
| BS: BS_DEV_RESOURCES times (us): entry 0 run 1484 exit 0 |
| Enabling resources... |
| PCI: 00:00.0 subsystem <- 17aa/20e0 |
| PCI: 00:00.0 cmd <- 06 |
| PCI: 00:02.0 subsystem <- 17aa/20e4 |
| PCI: 00:02.0 cmd <- 03 |
| PCI: 00:02.1 subsystem <- 17aa/20e4 |
| PCI: 00:02.1 cmd <- 02 |
| PCI: 00:19.0 subsystem <- 8086/10f5 |
| PCI: 00:19.0 cmd <- 103 |
| PCI: 00:1a.0 subsystem <- 17aa/20f0 |
| PCI: 00:1a.0 cmd <- 01 |
| PCI: 00:1a.1 subsystem <- 17aa/20f0 |
| PCI: 00:1a.1 cmd <- 01 |
| PCI: 00:1a.2 subsystem <- 17aa/20f0 |
| PCI: 00:1a.2 cmd <- 01 |
| PCI: 00:1a.7 subsystem <- 17aa/20f1 |
| PCI: 00:1a.7 cmd <- 106 |
| PCI: 00:1b.0 subsystem <- 17aa/20f2 |
| PCI: 00:1b.0 cmd <- 102 |
| PCI: 00:1c.0 bridge ctrl <- 0003 |
| PCI: 00:1c.0 subsystem <- 17aa/20f3 |
| PCI: 00:1c.0 cmd <- 100 |
| PCI: 00:1c.1 bridge ctrl <- 0003 |
| PCI: 00:1c.1 subsystem <- 17aa/20f3 |
| PCI: 00:1c.1 cmd <- 106 |
| PCI: 00:1c.2 bridge ctrl <- 0003 |
| PCI: 00:1c.2 subsystem <- 17aa/20f3 |
| PCI: 00:1c.2 cmd <- 100 |
| PCI: 00:1c.3 bridge ctrl <- 0003 |
| PCI: 00:1c.3 subsystem <- 17aa/20f3 |
| PCI: 00:1c.3 cmd <- 107 |
| PCI: 00:1d.0 subsystem <- 17aa/20f0 |
| PCI: 00:1d.0 cmd <- 01 |
| PCI: 00:1d.1 subsystem <- 17aa/20f0 |
| PCI: 00:1d.1 cmd <- 01 |
| PCI: 00:1d.2 subsystem <- 17aa/20f0 |
| PCI: 00:1d.2 cmd <- 01 |
| PCI: 00:1d.7 subsystem <- 17aa/20f1 |
| PCI: 00:1d.7 cmd <- 102 |
| PCI: 00:1e.0 bridge ctrl <- 0003 |
| PCI: 00:1e.0 subsystem <- 17aa/20f4 |
| PCI: 00:1e.0 cmd <- 100 |
| PCI: 00:1f.0 subsystem <- 17aa/20f5 |
| PCI: 00:1f.0 cmd <- 107 |
| PCI: 00:1f.2 subsystem <- 17aa/20f8 |
| PCI: 00:1f.2 cmd <- 03 |
| PCI: 00:1f.3 subsystem <- 17aa/20f9 |
| PCI: 00:1f.3 cmd <- 103 |
| PCI: 02:00.0 cmd <- 02 |
| done. |
| BS: BS_DEV_ENABLE times (us): entry 0 run 216 exit 0 |
| Initializing devices... |
| Root Device init ... |
| Root Device init finished in 1 usecs |
| CPU_CLUSTER: 0 init ... |
| CBFS: 'Master Header Locator' located CBFS at [10200:800000) |
| CBFS: Locating 'cpu_microcode_blob.bin' |
| CBFS: Found @ offset edc0 size c000 |
| microcode: sig=0x1067a pf=0x80 revision=0x0 |
| microcode: updated to revision 0xa0b date=2010-09-28 |
| MTRR: Physical address space: |
| 0x0000000000000000 - 0x00000000000a0000 size 0x000a0000 type 6 |
| 0x00000000000a0000 - 0x00000000000c0000 size 0x00020000 type 0 |
| 0x00000000000c0000 - 0x000000007d800000 size 0x7d740000 type 6 |
| 0x000000007d800000 - 0x00000000d0000000 size 0x52800000 type 0 |
| 0x00000000d0000000 - 0x00000000e0000000 size 0x10000000 type 1 |
| 0x00000000e0000000 - 0x0000000100000000 size 0x20000000 type 0 |
| 0x0000000100000000 - 0x0000000280000000 size 0x180000000 type 6 |
| MTRR: Fixed MSR 0x250 0x0606060606060606 |
| MTRR: Fixed MSR 0x258 0x0606060606060606 |
| MTRR: Fixed MSR 0x259 0x0000000000000000 |
| MTRR: Fixed MSR 0x268 0x0606060606060606 |
| MTRR: Fixed MSR 0x269 0x0606060606060606 |
| MTRR: Fixed MSR 0x26a 0x0606060606060606 |
| MTRR: Fixed MSR 0x26b 0x0606060606060606 |
| MTRR: Fixed MSR 0x26c 0x0606060606060606 |
| MTRR: Fixed MSR 0x26d 0x0606060606060606 |
| MTRR: Fixed MSR 0x26e 0x0606060606060606 |
| MTRR: Fixed MSR 0x26f 0x0606060606060606 |
| CPU physical address size: 36 bits |
| MTRR: default type WB/UC MTRR counts: 6/6. |
| MTRR: UC selected as default type. |
| MTRR: 0 base 0x0000000000000000 mask 0x0000000f80000000 type 6 |
| MTRR: 1 base 0x000000007d800000 mask 0x0000000fff800000 type 0 |
| MTRR: 2 base 0x000000007e000000 mask 0x0000000ffe000000 type 0 |
| MTRR: 3 base 0x00000000d0000000 mask 0x0000000ff0000000 type 1 |
| MTRR: 4 base 0x0000000100000000 mask 0x0000000f00000000 type 6 |
| MTRR: 5 base 0x0000000200000000 mask 0x0000000f80000000 type 6 |
| |
| MTRR check |
| Fixed MTRRs : Enabled |
| Variable MTRRs: Enabled |
| |
| CPU has 2 cores. |
| Setting up SMI for CPU |
| Will perform SMM setup. |
| CPU: Intel(R) Core(TM)2 Duo CPU P8800 @ 2.66GHz. |
| Loading module at 00030000 with entry 00030000. filesize: 0x170 memsize: 0x170 |
| Processing 16 relocs. Offset value of 0x00030000 |
| Attempting to start 1 APs |
| Waiting for 10ms after sending INIT. |
| Waiting for 1st SIPI to complete...done. |
| Waiting for 2nd SIPI to complete...done. |
| AP: slot 1 apic_id 1. |
| Loading module at 00038000 with entry 00038000. filesize: 0x1a8 memsize: 0x1a8 |
| Processing 13 relocs. Offset value of 0x00038000 |
| SMM Module: stub loaded at 00038000. Will call 7d7a895f(00000000) |
| Installing SMM handler to 0x7da00000 |
| Loading module at 7da10000 with entry 7da10408. filesize: 0xe88 memsize: 0x4ea8 |
| Processing 41 relocs. Offset value of 0x7da10000 |
| Loading module at 7da08000 with entry 7da08000. filesize: 0x1a8 memsize: 0x1a8 |
| Processing 13 relocs. Offset value of 0x7da08000 |
| SMM Module: placing jmp sequence at 7da07c00 rel16 0x03fd |
| SMM Module: stub loaded at 7da08000. Will call 7da10408(00000000) |
| Initializing Southbridge SMI... |
| |
| New SMBASE 0x7da00000 |
| In relocation handler: cpu 0 |
| New SMBASE=0x7da00000 |
| Writing SMRR. base = 0x7da00000, mask=0xffe00800 |
| SMRR not enabled, skip writing SMRR... |
| Relocation complete. |
| VMX status: enabled |
| VMX status: enabled |
| New SMBASE 0x7d9ffc00 |
| In relocation handler: cpu 1 |
| New SMBASE=0x7d9ffc00 |
| Writing SMRR. base = 0x7da00000, mask=0xffe00800 |
| Relocation complete. |
| Initializing CPU #0 |
| CPU: vendor Intel device 1067a |
| CPU: family 06, model 17, stepping 0a |
| Enabling cache |
| CPU: Intel(R) Core(TM)2 Duo CPU P8800 @ 2.66GHz. |
| Setting up local APIC... apic_id: 0x00 done. |
| writing P-State 2: 0, 0, 6, 0x17, 15000; encoded: 0x0617 |
| writing P-State 2: 0, 0, 6, 0x17, 15000; encoded: 0x0617 |
| writing P-State 2: 0, 0, 6, 0x17, 15000; encoded: 0x0617 |
| writing P-State 2: 0, 0, 6, 0x17, 15000; encoded: 0x0617 |
| writing P-State 1: 0, 0, 8, 0x1c, 25000; encoded: 0x081c |
| writing P-State 0: 0, 0, 10, 0x21, 35000; encoded: 0x0a21 |
| CPU #0 initialized |
| Initializing CPU #1 |
| CPU: vendor Intel device 1067a |
| CPU: family 06, model 17, stepping 0a |
| Enabling cache |
| CPU: Intel(R) Core(TM)2 Duo CPU P8800 @ 2.66GHz. |
| Setting up local APIC... apic_id: 0x01 done. |
| writing P-State 3: 0, 0, 6, 0x17, 15000; encoded: 0x0617 |
| writing P-State 3: 0, 0, 6, 0x17, 15000; encoded: 0x0617 |
| writing P-State 3: 0, 0, 6, 0x17, 15000; encoded: 0x0617 |
| writing P-State 3: 0, 0, 6, 0x17, 15000; encoded: 0x0617 |
| writing P-State 2: 0, 0, 8, 0x1c, 25000; encoded: 0x081c |
| writing P-State 1: 0, 0, 10, 0x21, 35000; encoded: 0x0a21 |
| CPU #1 initialized |
| bsp_do_flight_plan done after 16111 msecs. |
| Initializing southbridge SMI... |
| SMI_STS: |
| GPE0_STS: GPIO13 GPIO11 GPIO10 GPIO5 GPIO4 GPIO3 GPIO2 GPIO0 |
| ALT_GP_SMI_STS: GPI14 GPI13 GPI11 GPI10 GPI9 GPI8 GPI5 GPI4 GPI3 GPI2 GPI1 GPI0 |
| TCO_STS: |
| Locking SMM. |
| CPU_CLUSTER: 0 init finished in 16134083 usecs |
| DOMAIN: 0000 init ... |
| DOMAIN: 0000 init finished in 1 usecs |
| PCI: 00:00.0 init ... |
| PCI: 00:00.0 init finished in 1 usecs |
| PCI: 00:02.0 init ... |
| LVDS EDID |
| WARNING: EDID block does NOT fully conform to EDID 1.3. |
| Missing name descriptor |
| Missing monitor ranges |
| Found EDID string: HV121WX4-120 in lookup table, pwm: 110Hz |
| |
| [16.206200] CONFIG => |
| [16.206202] (Primary => |
| [16.206203] (Port => Internal, |
| [16.206204] Framebuffer => |
| [16.206205] (Width => 640, |
| [16.206207] Height => 400, |
| [16.206209] Start_X => 0, |
| [16.206210] Start_Y => 0, |
| [16.206212] Stride => 1, |
| [16.206214] V_Stride => 1, |
| [16.206216] Tiling => Linear , |
| [16.206218] Rotation => No_Rotation, |
| [16.206220] Offset => 0xffffffff, |
| [16.206222] BPC => 8), |
| [16.206224] Mode => |
| [16.206225] (Dotclock => 75160000, |
| [16.206227] H_Visible => 1280, |
| [16.206229] H_Sync_Begin => 1354, |
| [16.206231] H_Sync_End => 1412, |
| [16.206233] H_Total => 1522, |
| [16.206235] V_Visible => 800, |
| [16.206237] V_Sync_Begin => 803, |
| [16.206239] V_Sync_End => 809, |
| [16.206241] V_Total => 823, |
| [16.206243] H_Sync_Active_High => False, |
| [16.206245] V_Sync_Active_High => False, |
| [16.206247] BPC => 5)), |
| [16.206249] Secondary => |
| [16.206250] (Port => Disabled, |
| [16.206251] Framebuffer => |
| [16.206252] (Width => 1, |
| [16.206254] Height => 1, |
| [16.206256] Start_X => 0, |
| [16.206258] Start_Y => 0, |
| [16.206260] Stride => 1, |
| [16.206262] V_Stride => 1, |
| [16.206264] Tiling => Linear , |
| [16.206266] Rotation => No_Rotation, |
| [16.206268] Offset => 0x00000000, |
| [16.206270] BPC => 8), |
| [16.206271] Mode => |
| [16.206272] (Dotclock => 19200000, |
| [16.206274] H_Visible => 1, |
| [16.206276] H_Sync_Begin => 1, |
| [16.206278] H_Sync_End => 1, |
| [16.206280] H_Total => 1, |
| [16.206282] V_Visible => 1, |
| [16.206284] V_Sync_Begin => 1, |
| [16.206286] V_Sync_End => 1, |
| [16.206288] V_Total => 1, |
| [16.206290] H_Sync_Active_High => False, |
| [16.206292] V_Sync_Active_High => False, |
| [16.206294] BPC => 5)), |
| [16.206296] Tertiary => |
| [16.206297] (Port => Disabled, |
| [16.206298] Framebuffer => |
| [16.206299] (Width => 1, |
| [16.206301] Height => 1, |
| [16.206303] Start_X => 0, |
| [16.206305] Start_Y => 0, |
| [16.206307] Stride => 1, |
| [16.206309] V_Stride => 1, |
| [16.206311] Tiling => Linear , |
| [16.206313] Rotation => No_Rotation, |
| [16.206315] Offset => 0x00000000, |
| [16.206317] BPC => 8), |
| [16.206318] Mode => |
| [16.206319] (Dotclock => 19200000, |
| [16.206321] H_Visible => 1, |
| [16.206323] H_Sync_Begin => 1, |
| [16.206325] H_Sync_End => 1, |
| [16.206327] H_Total => 1, |
| [16.206329] V_Visible => 1, |
| [16.206331] V_Sync_Begin => 1, |
| [16.206333] V_Sync_End => 1, |
| [16.206335] V_Total => 1, |
| [16.206337] H_Sync_Active_High => False, |
| [16.206339] V_Sync_Active_High => False, |
| [16.206341] BPC => 5))); |
| PCI: 00:02.0 init finished in 59902 usecs |
| PCI: 00:02.1 init ... |
| PCI: 00:02.1 init finished in 1 usecs |
| PCI: 00:19.0 init ... |
| PCI: 00:19.0 init finished in 1 usecs |
| PCI: 00:1a.0 init ... |
| PCI: 00:1a.0 init finished in 1 usecs |
| PCI: 00:1a.1 init ... |
| PCI: 00:1a.1 init finished in 1 usecs |
| PCI: 00:1a.2 init ... |
| PCI: 00:1a.2 init finished in 1 usecs |
| PCI: 00:1a.7 init ... |
| EHCI: Setting up controller.. done. |
| PCI: 00:1a.7 init finished in 4 usecs |
| PCI: 00:1b.0 init ... |
| Azalia: base = e1620000 |
| Azalia: codec_mask = 01 |
| HD Audio: Initializing codec #0 |
| Azalia: codec viddid: 14f15051 |
| Azalia: verb_size: 32 |
| Azalia: verb loaded. |
| PCI: 00:1b.0 init finished in 3740 usecs |
| PCI: 00:1c.0 init ... |
| Initializing ICH9 PCIe root port. |
| PCI: 00:1c.0 init finished in 17 usecs |
| PCI: 00:1c.1 init ... |
| Initializing ICH9 PCIe root port. |
| PCI: 00:1c.1 init finished in 16 usecs |
| PCI: 00:1c.2 init ... |
| Initializing ICH9 PCIe root port. |
| PCI: 00:1c.2 init finished in 16 usecs |
| PCI: 00:1c.3 init ... |
| Initializing ICH9 PCIe root port. |
| PCI: 00:1c.3 init finished in 18 usecs |
| PCI: 00:1d.0 init ... |
| PCI: 00:1d.0 init finished in 1 usecs |
| PCI: 00:1d.1 init ... |
| PCI: 00:1d.1 init finished in 1 usecs |
| PCI: 00:1d.2 init ... |
| PCI: 00:1d.2 init finished in 1 usecs |
| PCI: 00:1d.7 init ... |
| EHCI: Setting up controller.. done. |
| PCI: 00:1d.7 init finished in 4 usecs |
| PCI: 00:1e.0 init ... |
| PCI: 00:1e.0 init finished in 6 usecs |
| PCI: 00:1f.0 init ... |
| i82801ix: lpc_init |
| IOAPIC: Initializing IOAPIC at 0xfec00000 |
| IOAPIC: Bootstrap Processor Local APIC = 0x00 |
| IOAPIC: ID = 0x02 |
| IOAPIC: 24 interrupts |
| IOAPIC: Enabling interrupts on FSB |
| FMAP: area COREBOOT found @ 10200 (8322560 bytes) |
| CBFS: Locating 'cmos_layout.bin' |
| CBFS: Found @ offset 332c0 size 680 |
| Set power off after power failure. |
| FMAP: area COREBOOT found @ 10200 (8322560 bytes) |
| CBFS: Locating 'cmos_layout.bin' |
| CBFS: Found @ offset 332c0 size 680 |
| No CMOS option 'nmi'. |
| NMI sources disabled. |
| rtc_failed = 0x0 |
| RTC Init |
| Disabling ACPI via APMC: |
| done. |
| PCI: 00:1f.0 init finished in 1925 usecs |
| PCI: 00:1f.2 init ... |
| i82801ix_sata: initializing... |
| FMAP: area COREBOOT found @ 10200 (8322560 bytes) |
| CBFS: Locating 'cmos_layout.bin' |
| CBFS: Found @ offset 332c0 size 680 |
| SATA controller in AHCI mode. |
| ABAR: e1625000 |
| PCI: 00:1f.2 init finished in 634 usecs |
| PCI: 00:1f.3 init ... |
| PCI: 00:1f.3 init finished in 5 usecs |
| PCI: 02:00.0 init ... |
| PCI: 02:00.0 init finished in 1 usecs |
| IOAPIC: 02 init ... |
| IOAPIC: Initializing IOAPIC at 0xfec00000 |
| IOAPIC: Bootstrap Processor Local APIC = 0x00 |
| IOAPIC: 23 interrupts |
| IOAPIC: Enabling interrupts on FSB |
| IOAPIC: 02 init finished in 37 usecs |
| PNP: 00ff.2 init ... |
| PNP: 00ff.2 init finished in 1 usecs |
| PNP: 164e.3 init ... |
| PNP: 164e.3 init finished in 1 usecs |
| smbus: PCI: 00:1f.3[0]->I2C: 01:54 init ... |
| I2C: 01:54 init finished in 3 usecs |
| smbus: PCI: 00:1f.3[0]->I2C: 01:55 init ... |
| I2C: 01:55 init finished in 3 usecs |
| smbus: PCI: 00:1f.3[0]->I2C: 01:56 init ... |
| I2C: 01:56 init finished in 2 usecs |
| smbus: PCI: 00:1f.3[0]->I2C: 01:57 init ... |
| I2C: 01:57 init finished in 3 usecs |
| smbus: PCI: 00:1f.3[0]->I2C: 01:5c init ... |
| Locking EEPROM RFID |
| init EEPROM done |
| I2C: 01:5c init finished in 28648 usecs |
| smbus: PCI: 00:1f.3[0]->I2C: 01:5d init ... |
| I2C: 01:5d init finished in 3 usecs |
| smbus: PCI: 00:1f.3[0]->I2C: 01:5e init ... |
| I2C: 01:5e init finished in 3 usecs |
| smbus: PCI: 00:1f.3[0]->I2C: 01:5f init ... |
| I2C: 01:5f init finished in 3 usecs |
| Devices initialized |
| BS: BS_DEV_INIT times (us): entry 0 run 16229214 exit 0 |
| Finalize devices... |
| Devices finalized |
| BS: BS_POST_DEVICE times (us): entry 0 run 4 exit 0 |
| BS: BS_OS_RESUME_CHECK times (us): entry 0 run 1 exit 0 |
| Writing ISA IRQs |
| no IRQ found for PCI: 00:00.0 |
| fixed IRQ entry for: PCI: 00:02.0: INTA# -> IOAPIC 2 PIN 16 |
| no IRQ found for PCI: 00:02.1 |
| no IRQ found for PCI: 00:19.0 |
| fixed IRQ entry for: PCI: 00:1a.0: INTA# -> IOAPIC 2 PIN 16 |
| fixed IRQ entry for: PCI: 00:1a.1: INTB# -> IOAPIC 2 PIN 17 |
| fixed IRQ entry for: PCI: 00:1a.2: INTC# -> IOAPIC 2 PIN 18 |
| fixed IRQ entry for: PCI: 00:1a.7: INTC# -> IOAPIC 2 PIN 18 |
| fixed IRQ entry for: PCI: 00:1b.0: INTA# -> IOAPIC 2 PIN 16 |
| fixed IRQ entry for: PCI: 00:1c.0: INTA# -> IOAPIC 2 PIN 16 |
| no IRQ found for PCI: 00:1c.1 |
| no IRQ found for PCI: 00:1c.2 |
| no IRQ found for PCI: 00:1c.3 |
| fixed IRQ entry for: PCI: 00:1d.0: INTA# -> IOAPIC 2 PIN 16 |
| fixed IRQ entry for: PCI: 00:1d.1: INTB# -> IOAPIC 2 PIN 17 |
| fixed IRQ entry for: PCI: 00:1d.2: INTC# -> IOAPIC 2 PIN 18 |
| fixed IRQ entry for: PCI: 00:1d.7: INTA# -> IOAPIC 2 PIN 16 |
| no IRQ found for PCI: 00:1e.0 |
| no IRQ found for PCI: 00:1f.0 |
| fixed IRQ entry for: PCI: 00:1f.2: INTB# -> IOAPIC 2 PIN 17 |
| fixed IRQ entry for: PCI: 00:1f.3: INTC# -> IOAPIC 2 PIN 18 |
| no IRQ found for PCI: 02:00.0 |
| Wrote the mp table end at: 000f0010 - 000f0194 |
| MPTABLE len: 404 |
| Writing ISA IRQs |
| no IRQ found for PCI: 00:00.0 |
| fixed IRQ entry for: PCI: 00:02.0: INTA# -> IOAPIC 2 PIN 16 |
| no IRQ found for PCI: 00:02.1 |
| no IRQ found for PCI: 00:19.0 |
| fixed IRQ entry for: PCI: 00:1a.0: INTA# -> IOAPIC 2 PIN 16 |
| fixed IRQ entry for: PCI: 00:1a.1: INTB# -> IOAPIC 2 PIN 17 |
| fixed IRQ entry for: PCI: 00:1a.2: INTC# -> IOAPIC 2 PIN 18 |
| fixed IRQ entry for: PCI: 00:1a.7: INTC# -> IOAPIC 2 PIN 18 |
| fixed IRQ entry for: PCI: 00:1b.0: INTA# -> IOAPIC 2 PIN 16 |
| fixed IRQ entry for: PCI: 00:1c.0: INTA# -> IOAPIC 2 PIN 16 |
| no IRQ found for PCI: 00:1c.1 |
| no IRQ found for PCI: 00:1c.2 |
| no IRQ found for PCI: 00:1c.3 |
| fixed IRQ entry for: PCI: 00:1d.0: INTA# -> IOAPIC 2 PIN 16 |
| fixed IRQ entry for: PCI: 00:1d.1: INTB# -> IOAPIC 2 PIN 17 |
| fixed IRQ entry for: PCI: 00:1d.2: INTC# -> IOAPIC 2 PIN 18 |
| fixed IRQ entry for: PCI: 00:1d.7: INTA# -> IOAPIC 2 PIN 16 |
| no IRQ found for PCI: 00:1e.0 |
| no IRQ found for PCI: 00:1f.0 |
| fixed IRQ entry for: PCI: 00:1f.2: INTB# -> IOAPIC 2 PIN 17 |
| fixed IRQ entry for: PCI: 00:1f.3: INTC# -> IOAPIC 2 PIN 18 |
| no IRQ found for PCI: 02:00.0 |
| Wrote the mp table end at: 7d774010 - 7d774194 |
| MPTABLE len: 404 |
| MP table: 404 bytes. |
| CBFS: 'Master Header Locator' located CBFS at [10200:800000) |
| CBFS: Locating 'fallback/dsdt.aml' |
| CBFS: Found @ offset 38200 size 3aa4 |
| CBFS: 'Master Header Locator' located CBFS at [10200:800000) |
| CBFS: Locating 'fallback/slic' |
| CBFS: 'fallback/slic' not found. |
| ACPI: Writing ACPI tables at 7d750000. |
| ACPI: * FACS |
| ACPI: * DSDT |
| ACPI: * FADT |
| ACPI: added table 1/32, length now 40 |
| ACPI: * SSDT |
| Super I/O probe failed, skipping wacom |
| Found 1 CPU(s) with 2 core(s) each. |
| clocks between 800 and 2800 MHz. |
| adding 5 P-States between busratio 6 and a, incl. P0 |
| PSS: 2667MHz power 35000 control 0x4a2b status 0x4a2b |
| PSS: 2666MHz power 35000 control 0xa21 status 0xa21 |
| PSS: 2133MHz power 25000 control 0x81c status 0x81c |
| PSS: 1600MHz power 15000 control 0x617 status 0x617 |
| PSS: 800MHz power 12000 control 0x860d status 0x860d |
| clocks between 800 and 2800 MHz. |
| adding 5 P-States between busratio 6 and a, incl. P0 |
| PSS: 2667MHz power 35000 control 0x4a2b status 0x4a2b |
| PSS: 2666MHz power 35000 control 0xa21 status 0xa21 |
| PSS: 2133MHz power 25000 control 0x81c status 0x81c |
| PSS: 1600MHz power 15000 control 0x617 status 0x617 |
| PSS: 800MHz power 12000 control 0x860d status 0x860d |
| Generating ACPI PIRQ entries |
| ACPI: * H8 |
| H8: BDC installed |
| H8: WWAN detection not implemented. Assuming WWAN installed |
| ACPI: added table 2/32, length now 44 |
| ACPI: * MCFG |
| ACPI: added table 3/32, length now 48 |
| ACPI: * MADT |
| ACPI: added table 4/32, length now 52 |
| current = 7d7548b0 |
| ACPI: * DMAR |
| ACPI: added table 5/32, length now 56 |
| current = 7d754930 |
| GMA: Using CCFL backlight VBT |
| CBFS: 'Master Header Locator' located CBFS at [10200:800000) |
| CBFS: Locating 'data_ccfl.vbt' |
| CBFS: Found @ offset 3bd00 size 5dd |
| Found a VBT of 3854 bytes after decompression |
| GMA: Found VBT in CBFS |
| GMA: Found valid VBT in CBFS |
| ACPI: * HPET |
| ACPI: added table 6/32, length now 60 |
| ACPI: done. |
| ACPI tables: 26992 bytes. |
| smbios_write_tables: 7d74f000 |
| SMBIOS tables: 446 bytes. |
| Writing table forward entry at 0x00000500 |
| Wrote coreboot table at: 00000500, 0x10 bytes, checksum 3267 |
| Writing coreboot table at 0x7d775000 |
| CBFS: 'Master Header Locator' located CBFS at [10200:800000) |
| CBFS: Locating 'cmos_layout.bin' |
| CBFS: Found @ offset 332c0 size 680 |
| 0. 0000000000000000-0000000000000fff: CONFIGURATION TABLES |
| 1. 0000000000001000-000000000009ffff: RAM |
| 2. 00000000000c0000-000000007d74efff: RAM |
| 3. 000000007d74f000-000000007d78dfff: CONFIGURATION TABLES |
| 4. 000000007d78e000-000000007d7cdfff: RAMSTAGE |
| 5. 000000007d7ce000-000000007d7fffff: CONFIGURATION TABLES |
| 6. 000000007d800000-000000007fffffff: RESERVED |
| 7. 00000000f0000000-00000000f3ffffff: RESERVED |
| 8. 0000000100000000-000000027fffffff: RAM |
| CBFS: 'Master Header Locator' located CBFS at [10200:800000) |
| Wrote coreboot table at: 7d775000, 0x98c bytes, checksum 99c6 |
| coreboot table: 2468 bytes. |
| IMD ROOT 0. 7d7ff000 00001000 |
| IMD SMALL 1. 7d7fe000 00001000 |
| CONSOLE 2. 7d7de000 00020000 |
| TIME STAMP 3. 7d7dd000 00000910 |
| ROMSTG STCK 4. 7d7d8000 00005000 |
| AFTER CAR 5. 7d7ce000 0000a000 |
| RAMSTAGE 6. 7d78d000 00041000 |
| SMM BACKUP 7. 7d77d000 00010000 |
| COREBOOT 8. 7d775000 00008000 |
| SMP TABLE 9. 7d774000 00001000 |
| ACPI 10. 7d750000 00024000 |
| SMBIOS 11. 7d74f000 00000800 |
| IMD small region: |
| IMD ROOT 0. 7d7fec00 00000400 |
| USBDEBUG 1. 7d7feba0 00000050 |
| ROMSTAGE 2. 7d7feb80 00000004 |
| ACPI GNVS 3. 7d7fea80 00000100 |
| COREBOOTFWD 4. 7d7fea40 00000028 |
| BS: BS_WRITE_TABLES times (us): entry 0 run 28402 exit 0 |
| CBFS: 'Master Header Locator' located CBFS at [10200:800000) |
| CBFS: Locating 'fallback/payload' |
| CBFS: Found @ offset 3c940 size 97345 |
| Checking segment from ROM address 0xff84cb78 |
| Checking segment from ROM address 0xff84cb94 |
| Checking segment from ROM address 0xff84cbb0 |
| Loading segment from ROM address 0xff84cb78 |
| code (compression=1) |
| New segment dstaddr 0x00008200 memsize 0x1b768 srcaddr 0xff84cbcc filesize 0x98cf |
| Loading Segment: addr: 0x00008200 memsz: 0x000000000001b768 filesz: 0x00000000000098cf |
| using LZMA |
| Clearing Segment: addr: 0x000000000001bf23 memsz: 0x0000000000007a45 |
| Loading segment from ROM address 0xff84cb94 |
| code (compression=1) |
| New segment dstaddr 0x00100000 memsize 0x1fc248 srcaddr 0xff85649b filesize 0x8da22 |
| Loading Segment: addr: 0x00100000 memsz: 0x00000000001fc248 filesz: 0x000000000008da22 |
| using LZMA |
| Loading segment from ROM address 0xff84cbb0 |
| Entry Point 0x00008200 |
| BS: BS_PAYLOAD_LOAD times (us): entry 0 run 292375 exit 0 |
| ICH7 watchdog disabled |
| Jumping to boot code at 00008200(7d775000) |
| error: no suitable video mode found. |
|
error: no video mode activated. |
|
error: file `/dejavusansmono.pf2' not found. |
|
error: file `/boot/grub/layouts/usqwerty.gkb' not found. |
|
GNU GRUB version 2.02 |
|
|
|
+----------------------------------------------------------------------------+||||||||||||||||||||||||+----------------------------------------------------------------------------+ Use the ^ and v keys to select which entry is highlighted. |
|
Press enter to boot the selected OS, `e' to edit the commands |
|
before booting or `c' for a command-line. *Load Operating System (incl. fully encrypted disks) [o] ? Search ISOLINUX menu (AHCI) [a] ? Search ISOLINUX menu (USB) [u] ? Search ISOLINUX menu (CD/DVD) [d] ? Load test configuration (grubtest.cfg) inside of CBFS [t] ? Search for GRUB2 configuration on external media [s] ? Poweroff [p] ? Reboot [r] ? ? ? ? ? The highlighted entry will be executed automatically in 1s. The highlighted entry will be executed automatically in 0s. Booting `Load Operating System (incl. fully encrypted disks) [o]' |
|
|
|
error: file `/boot/grub/fonts/unicode.pf2' not found. |
|
error: no suitable video mode found. |
|
GNU GRUB version 2.02 |
|
|
|
+----------------------------------------------------------------------------+||||||||||||||||||||||+----------------------------------------------------------------------------+ Use the ^ and v keys to select which entry is highlighted. |
|
Press enter to boot the selected OS, `e' to edit the commands |
|
before booting or `c' for a command-line. ESC to return |
|
previous menu. *Gentoo GNU/Linux ? Advanced options for Gentoo GNU/Linux ? ? ? ? ? ? ? ? ? ? The highlighted entry will be executed automatically in 3s. The highlighted entry will be executed automatically in 2s. The highlighted entry will be executed automatically in 1s. The highlighted entry will be executed automatically in 0s. Booting `Gentoo GNU/Linux' |
|
|
|
Loading Linux 5.1.2-gentoo ... |
|
Loading initial ramdisk ... |
|
|
| |
| coreboot-4.9-1860-g2761847f90 Sun Jun 2 04:11:29 UTC 2019 romstage starting (log level: 7)... |
| Stepping B3 |
| SMBus controller enabled. |
| 0:50:b |
| 2:51:b |
| Setting IGD memory frequencies for VCO #1. |
| Memory configured in dual-channel assymetric mode. |
| JEDEC init @0x00000000 |
| JEDEC init @0x08000000 |
| JEDEC init @0x10000000 |
| JEDEC init @0x18000000 |
| group 0, ch 0: 6.1.0.4.3 |
| group 1, ch 0: 6.0.2.7.6 |
| group 2, ch 0: 6.1.2.3.1 |
| group 3, ch 0: 6.1.0.7.7 |
| group 0, ch 1: 6.1.0.0.3 |
| group 1, ch 1: 6.0.2.5.2 |
| group 2, ch 1: 6.1.2.0.3 |
| group 3, ch 1: 6.1.0.6.2 |
| byte lane 0, ch 0: 4.5 |
| byte lane 1, ch 0: 5.3 |
| byte lane 2, ch 0: 5.1 |
| byte lane 3, ch 0: 4.5 |
| byte lane 4, ch 0: 4.4 |
| byte lane 5, ch 0: 4.5 |
| byte lane 6, ch 0: 4.0 |
| byte lane 7, ch 0: 5.2 |
| byte lane 0, ch 1: 4.2 |
| byte lane 1, ch 1: 5.1 |
| byte lane 2, ch 1: 4.5 |
| byte lane 3, ch 1: 4.3 |
| byte lane 4, ch 1: 4.7 |
| byte lane 5, ch 1: 4.5 |
| byte lane 6, ch 1: 4.1 |
| byte lane 7, ch 1: 5.2 |
| group 0, ch 0: 1.11.0 |
| group 1, ch 0: 1.9.5 |
| group 2, ch 0: 2.4.6 |
| group 3, ch 0: 2.8.5 |
| FMAP: Found "FLASH" version 1.1 at 10000. |
| FMAP: base = ff800000 size = 800000 #areas = 3 |
| FMAP: area COREBOOT found @ 10200 (8322560 bytes) |
| CBFS: Locating 'cmos_layout.bin' |
| CBFS: Found @ offset 339c0 size 680 |
| IGD decoded, subtracting 32M UMA and 4M GTT |
| Memory configured in dual-channel interleaved mode. |
| Enabling IGD. |
| Finally disabling PEG in favor of IGD. |
| PEG x1 disabled, SDVO disabled |
| ICH9 waits for VC1 negotiation... done. |
| ICH9 waits for port arbitration table update... done. |
| CBMEM: |
| IMD: root @ 7d7ff000 254 entries. |
| IMD: root @ 7d7fec00 62 entries. |
| External stage cache: |
| IMD: root @ 7dbff000 254 entries. |
| IMD: root @ 7dbfec00 62 entries. |
| MTRR Range: Start=ff800000 End=0 (Size 800000) |
| MTRR Range: Start=0 End=1000000 (Size 1000000) |
| MTRR Range: Start=7d000000 End=7d800000 (Size 800000) |
| MTRR Range: Start=7da00000 End=7dc00000 (Size 200000) |
| CBFS: 'Master Header Locator' located CBFS at [10200:800000) |
| CBFS: Locating 'fallback/postcar' |
| CBFS: Found @ offset 34080 size 4a80 |
| Decompressing stage fallback/postcar @ 0x7d7cefc0 (35800 bytes) |
| Loading module at 7d7cf000 with entry 7d7cf000. filesize: 0x4790 memsize: 0x8b98 |
| Processing 165 relocs. Offset value of 0x7b7cf000 |
| |
| |
| coreboot-4.9-1860-g2761847f90 Sun Jun 2 04:11:29 UTC 2019 postcar starting (log level: 7)... |
| usbdebug: Failed hardware init |
| CBFS: 'Master Header Locator' located CBFS at [10200:800000) |
| CBFS: Locating 'fallback/ramstage' |
| CBFS: Found @ offset 1b0c0 size 182c3 |
| Decompressing stage fallback/ramstage @ 0x7d78cfc0 (262512 bytes) |
| Loading module at 7d78d000 with entry 7d78d000. filesize: 0x31548 memsize: 0x40130 |
| Processing 3402 relocs. Offset value of 0x7c98d000 |
| |
| |
| coreboot-4.9-1860-g2761847f90 Sun Jun 2 04:11:29 UTC 2019 ramstage starting (log level: 7)... |
| usbdebug: Failed hardware init |
| Normal boot. |
| apic timer freq (266) may be too fast. |
| BS: BS_PRE_DEVICE times (us): entry 0 run 1 exit 0 |
| Initializing i82801ix southbridge... |
| BS: BS_DEV_INIT_CHIPS times (us): entry 0 run 73 exit 0 |
| Enumerating buses... |
| CPU_CLUSTER: 0 enabled |
| DOMAIN: 0000 enabled |
| PCI: pci_scan_bus for bus 00 |
| PCI: 00:00.0 [8086/2a40] enabled |
| PCI: 00:02.0 [8086/2a42] enabled |
| PCI: 00:02.1 [8086/2a43] enabled |
| PCI: Static device PCI: 00:03.0 not found, disabling it. |
| PCI: 00:19.0 [8086/10f5] enabled |
| PCI: 00:1a.0 [8086/2937] enabled |
| PCI: 00:1a.1 [8086/2938] enabled |
| PCI: 00:1a.2 [8086/2939] enabled |
| PCI: 00:1a.7 [8086/293c] enabled |
| PCI: 00:1b.0 [8086/293e] enabled |
| PCI: 00:1c.0 [8086/2940] enabled |
| PCI: 00:1c.1 [8086/2942] enabled |
| PCI: 00:1c.2 [8086/2944] enabled |
| PCI: 00:1c.3 [8086/2946] enabled |
| PCI: 00:1d.0 [8086/2934] enabled |
| PCI: 00:1d.1 [8086/2935] enabled |
| PCI: 00:1d.2 [8086/2936] enabled |
| PCI: 00:1d.7 [8086/293a] enabled |
| PCI: 00:1e.0 [8086/2448] enabled |
| PCI: 00:1f.0 [8086/2917] enabled |
| FMAP: area COREBOOT found @ 10200 (8322560 bytes) |
| CBFS: Locating 'cmos_layout.bin' |
| CBFS: Found @ offset 339c0 size 680 |
| PCI: 00:1f.2 [8086/2928] enabled |
| PCI: 00:1f.3 [8086/2930] enabled |
| PCI: Leftover static devices: |
| PCI: 00:03.0 |
| PCI: 00:03.1 |
| PCI: 00:03.2 |
| PCI: 00:03.3 |
| PCI: 00:1c.4 |
| PCI: 00:1c.5 |
| PCI: 00:1f.5 |
| PCI: 00:1f.6 |
| PCI: Check your devicetree.cb. |
| PCI: pci_scan_bus for bus 01 |
| scan_bus: scanning of bus PCI: 00:1c.0 took 35 usecs |
| PCI: pci_scan_bus for bus 02 |
| PCI: 02:00.0 [168c/0034] enabled |
| Failed to enable LTR for dev = PCI: 02:00.0 |
| scan_bus: scanning of bus PCI: 00:1c.1 took 67 usecs |
| PCI: pci_scan_bus for bus 03 |
| scan_bus: scanning of bus PCI: 00:1c.2 took 35 usecs |
| PCI: pci_scan_bus for bus 04 |
| scan_bus: scanning of bus PCI: 00:1c.3 took 35 usecs |
| PCI: pci_scan_bus for bus 05 |
| scan_bus: scanning of bus PCI: 00:1e.0 took 47 usecs |
| IOAPIC: 02 enabled |
| FMAP: area COREBOOT found @ 10200 (8322560 bytes) |
| CBFS: Locating 'cmos_layout.bin' |
| CBFS: Found @ offset 339c0 size 680 |
| No CMOS option 'touchpad'. |
| FMAP: area COREBOOT found @ 10200 (8322560 bytes) |
| CBFS: Locating 'cmos_layout.bin' |
| CBFS: Found @ offset 339c0 size 680 |
| PMH7: ID 03 Revision 10 |
| PNP: 00ff.1 enabled |
| EC Firmware ID 7XHT25WW-3.6, Version 7.01A |
| FMAP: area COREBOOT found @ 10200 (8322560 bytes) |
| CBFS: Locating 'cmos_layout.bin' |
| CBFS: Found @ offset 339c0 size 680 |
| FMAP: area COREBOOT found @ 10200 (8322560 bytes) |
| CBFS: Locating 'cmos_layout.bin' |
| CBFS: Found @ offset 339c0 size 680 |
| FMAP: area COREBOOT found @ 10200 (8322560 bytes) |
| CBFS: Locating 'cmos_layout.bin' |
| CBFS: Found @ offset 339c0 size 680 |
| No CMOS option 'usb_always_on'. |
| FMAP: area COREBOOT found @ 10200 (8322560 bytes) |
| CBFS: Locating 'cmos_layout.bin' |
| CBFS: Found @ offset 339c0 size 680 |
| FMAP: area COREBOOT found @ 10200 (8322560 bytes) |
| CBFS: Locating 'cmos_layout.bin' |
| CBFS: Found @ offset 339c0 size 680 |
| H8: BDC installed |
| FMAP: area COREBOOT found @ 10200 (8322560 bytes) |
| CBFS: Locating 'cmos_layout.bin' |
| CBFS: Found @ offset 339c0 size 680 |
| H8: WWAN detection not implemented. Assuming WWAN installed |
| FMAP: area COREBOOT found @ 10200 (8322560 bytes) |
| CBFS: Locating 'cmos_layout.bin' |
| CBFS: Found @ offset 339c0 size 680 |
| FMAP: area COREBOOT found @ 10200 (8322560 bytes) |
| CBFS: Locating 'cmos_layout.bin' |
| CBFS: Found @ offset 339c0 size 680 |
| FMAP: area COREBOOT found @ 10200 (8322560 bytes) |
| CBFS: Locating 'cmos_layout.bin' |
| CBFS: Found @ offset 339c0 size 680 |
| FMAP: area COREBOOT found @ 10200 (8322560 bytes) |
| CBFS: Locating 'cmos_layout.bin' |
| CBFS: Found @ offset 339c0 size 680 |
| FMAP: area COREBOOT found @ 10200 (8322560 bytes) |
| CBFS: Locating 'cmos_layout.bin' |
| CBFS: Found @ offset 339c0 size 680 |
| dock is not connected |
| PNP: 00ff.2 enabled |
| PNP: 164e.3 enabled |
| PNP: 164e.2 disabled |
| PNP: 164e.7 disabled |
| PNP: 164e.19 disabled |
| scan_bus: scanning of bus PCI: 00:1f.0 took 10741 usecs |
| bus: PCI: 00:1f.3[0]->I2C: 01:54 enabled |
| bus: PCI: 00:1f.3[0]->I2C: 01:55 enabled |
| bus: PCI: 00:1f.3[0]->I2C: 01:56 enabled |
| bus: PCI: 00:1f.3[0]->I2C: 01:57 enabled |
| bus: PCI: 00:1f.3[0]->I2C: 01:5c enabled |
| bus: PCI: 00:1f.3[0]->I2C: 01:5d enabled |
| bus: PCI: 00:1f.3[0]->I2C: 01:5e enabled |
| bus: PCI: 00:1f.3[0]->I2C: 01:5f enabled |
| scan_bus: scanning of bus PCI: 00:1f.3 took 27 usecs |
| scan_bus: scanning of bus DOMAIN: 0000 took 11479 usecs |
| scan_bus: scanning of bus Root Device took 11485 usecs |
| done |
| BS: BS_DEV_ENUMERATE times (us): entry 0 run 11515 exit 0 |
| found VGA at PCI: 00:02.0 |
| Setting up VGA for PCI: 00:02.0 |
| Setting PCI_BRIDGE_CTL_VGA for bridge DOMAIN: 0000 |
| Setting PCI_BRIDGE_CTL_VGA for bridge Root Device |
| Allocating resources... |
| Reading resources... |
| TOUUD 0x280000000 TOLUD 0x80000000 TOM 0x200000000 |
| IGD decoded, subtracting 32M UMA, 4M GTT and 2M TSEG |
| Unused RAM between cbmem_top and TOM: 0x800K |
| Available memory below 4GB: 2008M |
| Available memory above 4GB: 6144M |
| Adding UMA memory area base=0x7d800000 size=0x2800000 |
| Adding PCIe config bar base=0xf0000000 size=0x4000000 |
| PCI: 00:1a.7 EHCI BAR hook registered |
| More than one caller of pci_ehci_read_resources from PCI: 00:1d.7 |
| PNP: 00ff.1 missing read_resources |
| PNP: 00ff.2 missing read_resources |
| Done reading resources. |
| skipping PNP: 00ff.2@60 fixed resource, size=0! |
| skipping PNP: 00ff.2@62 fixed resource, size=0! |
| skipping PNP: 00ff.2@64 fixed resource, size=0! |
| skipping PNP: 00ff.2@66 fixed resource, size=0! |
| skipping PNP: 164e.3@29 fixed resource, size=0! |
| skipping PNP: 164e.3@f0 fixed resource, size=0! |
| Setting resources... |
| DOMAIN: 0000 03 <- [0x0000000000 - 0x000009ffff] size 0x000a0000 gran 0x00 mem |
| DOMAIN: 0000 04 <- [0x00000c0000 - 0x007d7fffff] size 0x7d740000 gran 0x00 mem |
| DOMAIN: 0000 05 <- [0x0100000000 - 0x027fffffff] size 0x180000000 gran 0x00 mem |
| DOMAIN: 0000 06 <- [0x007d800000 - 0x007fffffff] size 0x02800000 gran 0x00 mem |
| DOMAIN: 0000 07 <- [0x00f0000000 - 0x00f3ffffff] size 0x04000000 gran 0x00 mem |
| PCI: 00:02.0 10 <- [0x00e1000000 - 0x00e13fffff] size 0x00400000 gran 0x16 mem64 |
| PCI: 00:02.0 18 <- [0x00d0000000 - 0x00dfffffff] size 0x10000000 gran 0x1c prefmem64 |
| PCI: 00:02.0 20 <- [0x0000003400 - 0x0000003407] size 0x00000008 gran 0x03 io |
| PCI: 00:02.1 10 <- [0x00e1400000 - 0x00e14fffff] size 0x00100000 gran 0x14 mem64 |
| PCI: 00:19.0 10 <- [0x00e1600000 - 0x00e161ffff] size 0x00020000 gran 0x11 mem |
| PCI: 00:19.0 14 <- [0x00e1624000 - 0x00e1624fff] size 0x00001000 gran 0x0c mem |
| PCI: 00:19.0 18 <- [0x0000003000 - 0x000000301f] size 0x00000020 gran 0x05 io |
| PCI: 00:1a.0 20 <- [0x0000003020 - 0x000000303f] size 0x00000020 gran 0x05 io |
| PCI: 00:1a.1 20 <- [0x0000003040 - 0x000000305f] size 0x00000020 gran 0x05 io |
| PCI: 00:1a.2 20 <- [0x0000003060 - 0x000000307f] size 0x00000020 gran 0x05 io |
| PCI: 00:1a.7 EHCI Debug Port hook triggered |
| PCI: 00:1a.7 10 <- [0x00e1626000 - 0x00e16263ff] size 0x00000400 gran 0x0a mem |
| PCI: 00:1a.7 10 <- [0x00e1626000 - 0x00e16263ff] size 0x00000400 gran 0x0a mem |
| PCI: 00:1a.7 EHCI Debug Port relocated |
| PCI: 00:1b.0 10 <- [0x00e1620000 - 0x00e1623fff] size 0x00004000 gran 0x0e mem64 |
| PCI: 00:1c.0 1c <- [0x000000ffff - 0x000000fffe] size 0x00000000 gran 0x0c bus 01 io |
| PCI: 00:1c.0 24 <- [0x00efffffff - 0x00effffffe] size 0x00000000 gran 0x14 bus 01 prefmem |
| PCI: 00:1c.0 20 <- [0x00efffffff - 0x00effffffe] size 0x00000000 gran 0x14 bus 01 mem |
| PCI: 00:1c.1 1c <- [0x000000ffff - 0x000000fffe] size 0x00000000 gran 0x0c bus 02 io |
| PCI: 00:1c.1 24 <- [0x00efffffff - 0x00effffffe] size 0x00000000 gran 0x14 bus 02 prefmem |
| PCI: 00:1c.1 20 <- [0x00e1500000 - 0x00e15fffff] size 0x00100000 gran 0x14 bus 02 mem |
| PCI: 02:00.0 10 <- [0x00e1500000 - 0x00e157ffff] size 0x00080000 gran 0x13 mem64 |
| PCI: 02:00.0 30 <- [0x00e1580000 - 0x00e158ffff] size 0x00010000 gran 0x10 romem |
| PCI: 00:1c.2 1c <- [0x000000ffff - 0x000000fffe] size 0x00000000 gran 0x0c bus 03 io |
| PCI: 00:1c.2 24 <- [0x00efffffff - 0x00effffffe] size 0x00000000 gran 0x14 bus 03 prefmem |
| PCI: 00:1c.2 20 <- [0x00efffffff - 0x00effffffe] size 0x00000000 gran 0x14 bus 03 mem |
| PCI: 00:1c.3 1c <- [0x0000002000 - 0x0000002fff] size 0x00001000 gran 0x0c bus 04 io |
| PCI: 00:1c.3 24 <- [0x00e0000000 - 0x00e07fffff] size 0x00800000 gran 0x14 bus 04 prefmem |
| PCI: 00:1c.3 20 <- [0x00e0800000 - 0x00e0ffffff] size 0x00800000 gran 0x14 bus 04 mem |
| NONE missing set_resources |
| PCI: 00:1d.0 20 <- [0x0000003080 - 0x000000309f] size 0x00000020 gran 0x05 io |
| PCI: 00:1d.1 20 <- [0x00000030a0 - 0x00000030bf] size 0x00000020 gran 0x05 io |
| PCI: 00:1d.2 20 <- [0x00000030c0 - 0x00000030df] size 0x00000020 gran 0x05 io |
| PCI: 00:1d.7 10 <- [0x00e1627000 - 0x00e16273ff] size 0x00000400 gran 0x0a mem |
| PCI: 00:1e.0 1c <- [0x000000ffff - 0x000000fffe] size 0x00000000 gran 0x0c bus 05 io |
| PCI: 00:1e.0 24 <- [0x00efffffff - 0x00effffffe] size 0x00000000 gran 0x14 bus 05 prefmem |
| PCI: 00:1e.0 20 <- [0x00efffffff - 0x00effffffe] size 0x00000000 gran 0x14 bus 05 mem |
| PNP: 00ff.1 missing set_resources |
| PNP: 00ff.2 missing set_resources |
| PNP: 164e.3 60 <- [0x0000000200 - 0x0000000207] size 0x00000008 gran 0x03 io |
| PNP: 164e.3 29 <- [0x00000000b0 - 0x00000000af] size 0x00000000 gran 0x00 irq |
| PNP: 164e.3 70 <- [0x0000000005 - 0x0000000005] size 0x00000001 gran 0x00 irq |
| PNP: 164e.3 f0 <- [0x0000000082 - 0x0000000081] size 0x00000000 gran 0x00 irq |
| PCI: 00:1f.2 10 <- [0x0000003408 - 0x000000340f] size 0x00000008 gran 0x03 io |
| PCI: 00:1f.2 14 <- [0x0000003418 - 0x000000341b] size 0x00000004 gran 0x02 io |
| PCI: 00:1f.2 18 <- [0x0000003410 - 0x0000003417] size 0x00000008 gran 0x03 io |
| PCI: 00:1f.2 1c <- [0x000000341c - 0x000000341f] size 0x00000004 gran 0x02 io |
| PCI: 00:1f.2 20 <- [0x00000030e0 - 0x00000030ff] size 0x00000020 gran 0x05 io |
| PCI: 00:1f.2 24 <- [0x00e1625000 - 0x00e16257ff] size 0x00000800 gran 0x0b mem |
| PCI: 00:1f.3 10 <- [0x00e1628000 - 0x00e16280ff] size 0x00000100 gran 0x08 mem64 |
| Done setting resources. |
| Done allocating resources. |
| BS: BS_DEV_RESOURCES times (us): entry 0 run 1524 exit 0 |
| Enabling resources... |
| PCI: 00:00.0 subsystem <- 17aa/20e0 |
| PCI: 00:00.0 cmd <- 06 |
| PCI: 00:02.0 subsystem <- 17aa/20e4 |
| PCI: 00:02.0 cmd <- 03 |
| PCI: 00:02.1 subsystem <- 17aa/20e4 |
| PCI: 00:02.1 cmd <- 02 |
| PCI: 00:19.0 subsystem <- 8086/10f5 |
| PCI: 00:19.0 cmd <- 103 |
| PCI: 00:1a.0 subsystem <- 17aa/20f0 |
| PCI: 00:1a.0 cmd <- 01 |
| PCI: 00:1a.1 subsystem <- 17aa/20f0 |
| PCI: 00:1a.1 cmd <- 01 |
| PCI: 00:1a.2 subsystem <- 17aa/20f0 |
| PCI: 00:1a.2 cmd <- 01 |
| PCI: 00:1a.7 subsystem <- 17aa/20f1 |
| PCI: 00:1a.7 cmd <- 106 |
| PCI: 00:1b.0 subsystem <- 17aa/20f2 |
| PCI: 00:1b.0 cmd <- 102 |
| PCI: 00:1c.0 bridge ctrl <- 0003 |
| PCI: 00:1c.0 subsystem <- 17aa/20f3 |
| PCI: 00:1c.0 cmd <- 100 |
| PCI: 00:1c.1 bridge ctrl <- 0003 |
| PCI: 00:1c.1 subsystem <- 17aa/20f3 |
| PCI: 00:1c.1 cmd <- 106 |
| PCI: 00:1c.2 bridge ctrl <- 0003 |
| PCI: 00:1c.2 subsystem <- 17aa/20f3 |
| PCI: 00:1c.2 cmd <- 100 |
| PCI: 00:1c.3 bridge ctrl <- 0003 |
| PCI: 00:1c.3 subsystem <- 17aa/20f3 |
| PCI: 00:1c.3 cmd <- 107 |
| PCI: 00:1d.0 subsystem <- 17aa/20f0 |
| PCI: 00:1d.0 cmd <- 01 |
| PCI: 00:1d.1 subsystem <- 17aa/20f0 |
| PCI: 00:1d.1 cmd <- 01 |
| PCI: 00:1d.2 subsystem <- 17aa/20f0 |
| PCI: 00:1d.2 cmd <- 01 |
| PCI: 00:1d.7 subsystem <- 17aa/20f1 |
| PCI: 00:1d.7 cmd <- 102 |
| PCI: 00:1e.0 bridge ctrl <- 0003 |
| PCI: 00:1e.0 subsystem <- 17aa/20f4 |
| PCI: 00:1e.0 cmd <- 100 |
| PCI: 00:1f.0 subsystem <- 17aa/20f5 |
| PCI: 00:1f.0 cmd <- 107 |
| PCI: 00:1f.2 subsystem <- 17aa/20f8 |
| PCI: 00:1f.2 cmd <- 03 |
| PCI: 00:1f.3 subsystem <- 17aa/20f9 |
| PCI: 00:1f.3 cmd <- 103 |
| PCI: 02:00.0 cmd <- 02 |
| done. |
| BS: BS_DEV_ENABLE times (us): entry 0 run 204 exit 0 |
| Initializing devices... |
| Root Device init ... |
| Root Device init finished in 1 usecs |
| CPU_CLUSTER: 0 init ... |
| CBFS: 'Master Header Locator' located CBFS at [10200:800000) |
| CBFS: Locating 'cpu_microcode_blob.bin' |
| CBFS: Found @ offset f040 size c000 |
| microcode: sig=0x1067a pf=0x80 revision=0x0 |
| microcode: updated to revision 0xa0b date=2010-09-28 |
| MTRR: Physical address space: |
| 0x0000000000000000 - 0x00000000000a0000 size 0x000a0000 type 6 |
| 0x00000000000a0000 - 0x00000000000c0000 size 0x00020000 type 0 |
| 0x00000000000c0000 - 0x000000007d800000 size 0x7d740000 type 6 |
| 0x000000007d800000 - 0x00000000d0000000 size 0x52800000 type 0 |
| 0x00000000d0000000 - 0x00000000e0000000 size 0x10000000 type 1 |
| 0x00000000e0000000 - 0x0000000100000000 size 0x20000000 type 0 |
| 0x0000000100000000 - 0x0000000280000000 size 0x180000000 type 6 |
| MTRR: Fixed MSR 0x250 0x0606060606060606 |
| MTRR: Fixed MSR 0x258 0x0606060606060606 |
| MTRR: Fixed MSR 0x259 0x0000000000000000 |
| MTRR: Fixed MSR 0x268 0x0606060606060606 |
| MTRR: Fixed MSR 0x269 0x0606060606060606 |
| MTRR: Fixed MSR 0x26a 0x0606060606060606 |
| MTRR: Fixed MSR 0x26b 0x0606060606060606 |
| MTRR: Fixed MSR 0x26c 0x0606060606060606 |
| MTRR: Fixed MSR 0x26d 0x0606060606060606 |
| MTRR: Fixed MSR 0x26e 0x0606060606060606 |
| MTRR: Fixed MSR 0x26f 0x0606060606060606 |
| CPU physical address size: 36 bits |
| MTRR: Removing WRCOMB type. WB/UC MTRR counts: 6/6 > 5. |
| MTRR: default type WB/UC MTRR counts: 3/5. |
| MTRR: WB selected as default type. |
| MTRR: 0 base 0x000000007d800000 mask 0x0000000fff800000 type 0 |
| MTRR: 1 base 0x000000007e000000 mask 0x0000000ffe000000 type 0 |
| MTRR: 2 base 0x0000000080000000 mask 0x0000000f80000000 type 0 |
| |
| MTRR check |
| Fixed MTRRs : Enabled |
| Variable MTRRs: Enabled |
| |
| CPU has 2 cores. |
| Setting up SMI for CPU |
| Will perform SMM setup. |
| CPU: Intel(R) Core(TM)2 Duo CPU P8800 @ 2.66GHz. |
| Loading module at 00030000 with entry 00030000. filesize: 0x170 memsize: 0x170 |
| Processing 16 relocs. Offset value of 0x00030000 |
| Attempting to start 1 APs |
| Waiting for 10ms after sending INIT. |
| Waiting for 1st SIPI to complete...done. |
| Waiting for 2nd SIPI to complete...done. |
| AP: slot 1 apic_id 1. |
| Loading module at 00038000 with entry 00038000. filesize: 0x1a8 memsize: 0x1a8 |
| Processing 13 relocs. Offset value of 0x00038000 |
| SMM Module: stub loaded at 00038000. Will call 7d7a7778(00000000) |
| Installing SMM handler to 0x7da00000 |
| Loading module at 7da10000 with entry 7da103fe. filesize: 0xec8 memsize: 0x4ee8 |
| Processing 45 relocs. Offset value of 0x7da10000 |
| Loading module at 7da08000 with entry 7da08000. filesize: 0x1a8 memsize: 0x1a8 |
| Processing 13 relocs. Offset value of 0x7da08000 |
| SMM Module: placing jmp sequence at 7da07c00 rel16 0x03fd |
| SMM Module: stub loaded at 7da08000. Will call 7da103fe(00000000) |
| Initializing Southbridge SMI... |
| |
| New SMBASE 0x7da00000 |
| In relocation handler: cpu 0 |
| New SMBASE=0x7da00000 |
| Writing SMRR. base = 0x7da00000, mask=0xffe00800 |
| Relocation complete. |
| IA32_FEATURE_CONTROL already locked; VMX status: enabled |
| IA32_FEATURE_CONTROL already locked; VMX status: enabled |
| IA32_FEATURE_CONTROL already locked |
| SMRR status: enabled |
| IA32_FEATURE_CONTROL already locked |
| SMRR status: enabled |
| New SMBASE 0x7d9ffc00 |
| In relocation handler: cpu 1 |
| New SMBASE=0x7d9ffc00 |
| Writing SMRR. base = 0x7da00000, mask=0xffe00800 |
| Relocation complete. |
| Initializing CPU #0 |
| CPU: vendor Intel device 1067a |
| CPU: family 06, model 17, stepping 0a |
| Enabling cache |
| CPU: Intel(R) Core(TM)2 Duo CPU P8800 @ 2.66GHz. |
| Setting up local APIC... |
| apic_id: 0x00 done. |
| writing P-State 2: 0, 0, 6, 0x17, 15000; encoded: 0x0617 |
| writing P-State 2: 0, 0, 6, 0x17, 15000; encoded: 0x0617 |
| writing P-State 2: 0, 0, 6, 0x17, 15000; encoded: 0x0617 |
| writing P-State 2: 0, 0, 6, 0x17, 15000; encoded: 0x0617 |
| writing P-State 1: 0, 0, 8, 0x1c, 25000; encoded: 0x081c |
| writing P-State 0: 0, 0, 10, 0x21, 35000; encoded: 0x0a21 |
| CPU #0 initialized |
| Initializing CPU #1 |
| CPU: vendor Intel device 1067a |
| CPU: family 06, model 17, stepping 0a |
| Enabling cache |
| CPU: Intel(R) Core(TM)2 Duo CPU P8800 @ 2.66GHz. |
| Setting up local APIC... |
| apic_id: 0x01 done. |
| writing P-State 3: 0, 0, 6, 0x17, 15000; encoded: 0x0617 |
| writing P-State 3: 0, 0, 6, 0x17, 15000; encoded: 0x0617 |
| writing P-State 3: 0, 0, 6, 0x17, 15000; encoded: 0x0617 |
| writing P-State 3: 0, 0, 6, 0x17, 15000; encoded: 0x0617 |
| writing P-State 2: 0, 0, 8, 0x1c, 25000; encoded: 0x081c |
| writing P-State 1: 0, 0, 10, 0x21, 35000; encoded: 0x0a21 |
| CPU #1 initialized |
| bsp_do_flight_plan done after 16111 msecs. |
| Initializing southbridge SMI... |
| SMI_STS: |
| GPE0_STS: GPIO14 GPIO13 GPIO11 GPIO10 GPIO5 GPIO4 GPIO3 GPIO2 GPIO0 |
| ALT_GP_SMI_STS: GPI14 GPI13 GPI11 GPI10 GPI9 GPI8 GPI5 GPI4 GPI3 GPI2 GPI1 GPI0 |
| TCO_STS: |
| Locking SMM. |
| CPU_CLUSTER: 0 init finished in 16133316 usecs |
| DOMAIN: 0000 init ... |
| DOMAIN: 0000 init finished in 1 usecs |
| PCI: 00:00.0 init ... |
| PCI: 00:00.0 init finished in 1 usecs |
| PCI: 00:02.0 init ... |
| LVDS EDID |
| WARNING: EDID block does NOT fully conform to EDID 1.3. |
| Missing name descriptor |
| Missing monitor ranges |
| Found EDID string: HV121WX4-120 in lookup table, pwm: 110Hz |
| |
| [16.206598] CONFIG => |
| [16.206600] (Primary => |
| [16.206601] (Port => Internal, |
| [16.206603] Framebuffer => |
| [16.206604] (Width => 640, |
| [16.206606] Height => 400, |
| [16.206608] Start_X => 0, |
| [16.206610] Start_Y => 0, |
| [16.206612] Stride => 1, |
| [16.206614] V_Stride => 1, |
| [16.206616] Tiling => Linear , |
| [16.206618] Rotation => No_Rotation, |
| [16.206620] Offset => 0xffffffff, |
| [16.206622] BPC => 8), |
| [16.206624] Mode => |
| [16.206625] (Dotclock => 75160000, |
| [16.206627] H_Visible => 1280, |
| [16.206629] H_Sync_Begin => 1354, |
| [16.206631] H_Sync_End => 1412, |
| [16.206633] H_Total => 1522, |
| [16.206635] V_Visible => 800, |
| [16.206637] V_Sync_Begin => 803, |
| [16.206639] V_Sync_End => 809, |
| [16.206641] V_Total => 823, |
| [16.206643] H_Sync_Active_High => False, |
| [16.206645] V_Sync_Active_High => False, |
| [16.206647] BPC => 5)), |
| [16.206649] Secondary => |
| [16.206650] (Port => Disabled, |
| [16.206651] Framebuffer => |
| [16.206652] (Width => 1, |
| [16.206654] Height => 1, |
| [16.206656] Start_X => 0, |
| [16.206658] Start_Y => 0, |
| [16.206659] Stride => 1, |
| [16.206661] V_Stride => 1, |
| [16.206662] Tiling => Linear , |
| [16.206664] Rotation => No_Rotation, |
| [16.206666] Offset => 0x00000000, |
| [16.206668] BPC => 8), |
| [16.206669] Mode => |
| [16.206670] (Dotclock => 19200000, |
| [16.206673] H_Visible => 1, |
| [16.206675] H_Sync_Begin => 1, |
| [16.206677] H_Sync_End => 1, |
| [16.206679] H_Total => 1, |
| [16.206681] V_Visible => 1, |
| [16.206683] V_Sync_Begin => 1, |
| [16.206685] V_Sync_End => 1, |
| [16.206687] V_Total => 1, |
| [16.206689] H_Sync_Active_High => False, |
| [16.206691] V_Sync_Active_High => False, |
| [16.206693] BPC => 5)), |
| [16.206695] Tertiary => |
| [16.206696] (Port => Disabled, |
| [16.206697] Framebuffer => |
| [16.206698] (Width => 1, |
| [16.206700] Height => 1, |
| [16.206702] Start_X => 0, |
| [16.206703] Start_Y => 0, |
| [16.206705] Stride => 1, |
| [16.206706] V_Stride => 1, |
| [16.206708] Tiling => Linear , |
| [16.206710] Rotation => No_Rotation, |
| [16.206712] Offset => 0x00000000, |
| [16.206714] BPC => 8), |
| [16.206716] Mode => |
| [16.206717] (Dotclock => 19200000, |
| [16.206719] H_Visible => 1, |
| [16.206721] H_Sync_Begin => 1, |
| [16.206723] H_Sync_End => 1, |
| [16.206725] H_Total => 1, |
| [16.206727] V_Visible => 1, |
| [16.206729] V_Sync_Begin => 1, |
| [16.206731] V_Sync_End => 1, |
| [16.206733] V_Total => 1, |
| [16.206735] H_Sync_Active_High => False, |
| [16.206737] V_Sync_Active_High => False, |
| [16.206739] BPC => 5))); |
| PCI: 00:02.0 init finished in 60307 usecs |
| PCI: 00:02.1 init ... |
| PCI: 00:02.1 init finished in 1 usecs |
| PCI: 00:19.0 init ... |
| PCI: 00:19.0 init finished in 1 usecs |
| PCI: 00:1a.0 init ... |
| PCI: 00:1a.0 init finished in 1 usecs |
| PCI: 00:1a.1 init ... |
| PCI: 00:1a.1 init finished in 1 usecs |
| PCI: 00:1a.2 init ... |
| PCI: 00:1a.2 init finished in 1 usecs |
| PCI: 00:1a.7 init ... |
| EHCI: Setting up controller.. done. |
| PCI: 00:1a.7 init finished in 5 usecs |
| PCI: 00:1b.0 init ... |
| Azalia: base = e1620000 |
| Azalia: codec_mask = 01 |
| HD Audio: Initializing codec #0 |
| Azalia: codec viddid: 14f15051 |
| Azalia: verb_size: 32 |
| Azalia: verb loaded. |
| PCI: 00:1b.0 init finished in 3739 usecs |
| PCI: 00:1c.0 init ... |
| Initializing ICH9 PCIe root port. |
| PCI: 00:1c.0 init finished in 17 usecs |
| PCI: 00:1c.1 init ... |
| Initializing ICH9 PCIe root port. |
| PCI: 00:1c.1 init finished in 17 usecs |
| PCI: 00:1c.2 init ... |
| Initializing ICH9 PCIe root port. |
| PCI: 00:1c.2 init finished in 17 usecs |
| PCI: 00:1c.3 init ... |
| Initializing ICH9 PCIe root port. |
| PCI: 00:1c.3 init finished in 18 usecs |
| PCI: 00:1d.0 init ... |
| PCI: 00:1d.0 init finished in 1 usecs |
| PCI: 00:1d.1 init ... |
| PCI: 00:1d.1 init finished in 1 usecs |
| PCI: 00:1d.2 init ... |
| PCI: 00:1d.2 init finished in 1 usecs |
| PCI: 00:1d.7 init ... |
| EHCI: Setting up controller.. done. |
| PCI: 00:1d.7 init finished in 4 usecs |
| PCI: 00:1e.0 init ... |
| PCI: 00:1e.0 init finished in 6 usecs |
| PCI: 00:1f.0 init ... |
| i82801ix: lpc_init |
| IOAPIC: Initializing IOAPIC at 0xfec00000 |
| IOAPIC: Bootstrap Processor Local APIC = 0x00 |
| IOAPIC: ID = 0x02 |
| IOAPIC: 24 interrupts |
| IOAPIC: Enabling interrupts on FSB |
| FMAP: area COREBOOT found @ 10200 (8322560 bytes) |
| CBFS: Locating 'cmos_layout.bin' |
| CBFS: Found @ offset 339c0 size 680 |
| Set power off after power failure. |
| FMAP: area COREBOOT found @ 10200 (8322560 bytes) |
| CBFS: Locating 'cmos_layout.bin' |
| CBFS: Found @ offset 339c0 size 680 |
| No CMOS option 'nmi'. |
| NMI sources disabled. |
| rtc_failed = 0x0 |
| RTC Init |
| Disabling ACPI via APMC: |
| done. |
| PCI: 00:1f.0 init finished in 1928 usecs |
| PCI: 00:1f.2 init ... |
| i82801ix_sata: initializing... |
| FMAP: area COREBOOT found @ 10200 (8322560 bytes) |
| CBFS: Locating 'cmos_layout.bin' |
| CBFS: Found @ offset 339c0 size 680 |
| SATA controller in AHCI mode. |
| ABAR: e1625000 |
| PCI: 00:1f.2 init finished in 635 usecs |
| PCI: 00:1f.3 init ... |
| PCI: 00:1f.3 init finished in 5 usecs |
| PCI: 02:00.0 init ... |
| PCI: 02:00.0 init finished in 1 usecs |
| IOAPIC: 02 init ... |
| IOAPIC: Initializing IOAPIC at 0xfec00000 |
| IOAPIC: Bootstrap Processor Local APIC = 0x00 |
| IOAPIC: 23 interrupts |
| IOAPIC: Enabling interrupts on FSB |
| IOAPIC: 02 init finished in 37 usecs |
| PNP: 00ff.2 init ... |
| PNP: 00ff.2 init finished in 1 usecs |
| PNP: 164e.3 init ... |
| PNP: 164e.3 init finished in 1 usecs |
| smbus: PCI: 00:1f.3[0]->I2C: 01:54 init ... |
| I2C: 01:54 init finished in 3 usecs |
| smbus: PCI: 00:1f.3[0]->I2C: 01:55 init ... |
| I2C: 01:55 init finished in 3 usecs |
| smbus: PCI: 00:1f.3[0]->I2C: 01:56 init ... |
| I2C: 01:56 init finished in 3 usecs |
| smbus: PCI: 00:1f.3[0]->I2C: 01:57 init ... |
| I2C: 01:57 init finished in 3 usecs |
| smbus: PCI: 00:1f.3[0]->I2C: 01:5c init ... |
| Locking EEPROM RFID |
| init EEPROM done |
| I2C: 01:5c init finished in 28666 usecs |
| smbus: PCI: 00:1f.3[0]->I2C: 01:5d init ... |
| I2C: 01:5d init finished in 3 usecs |
| smbus: PCI: 00:1f.3[0]->I2C: 01:5e init ... |
| I2C: 01:5e init finished in 3 usecs |
| smbus: PCI: 00:1f.3[0]->I2C: 01:5f init ... |
| I2C: 01:5f init finished in 3 usecs |
| Devices initialized |
| BS: BS_DEV_INIT times (us): entry 0 run 16228879 exit 0 |
| Finalize devices... |
| Devices finalized |
| BS: BS_POST_DEVICE times (us): entry 0 run 4 exit 0 |
| BS: BS_OS_RESUME_CHECK times (us): entry 0 run 1 exit 0 |
| Writing ISA IRQs |
| no IRQ found for PCI: 00:00.0 |
| fixed IRQ entry for: PCI: 00:02.0: INTA# -> IOAPIC 2 PIN 16 |
| no IRQ found for PCI: 00:02.1 |
| no IRQ found for PCI: 00:19.0 |
| fixed IRQ entry for: PCI: 00:1a.0: INTA# -> IOAPIC 2 PIN 16 |
| fixed IRQ entry for: PCI: 00:1a.1: INTB# -> IOAPIC 2 PIN 17 |
| fixed IRQ entry for: PCI: 00:1a.2: INTC# -> IOAPIC 2 PIN 18 |
| fixed IRQ entry for: PCI: 00:1a.7: INTC# -> IOAPIC 2 PIN 18 |
| fixed IRQ entry for: PCI: 00:1b.0: INTA# -> IOAPIC 2 PIN 16 |
| fixed IRQ entry for: PCI: 00:1c.0: INTA# -> IOAPIC 2 PIN 16 |
| no IRQ found for PCI: 00:1c.1 |
| no IRQ found for PCI: 00:1c.2 |
| no IRQ found for PCI: 00:1c.3 |
| fixed IRQ entry for: PCI: 00:1d.0: INTA# -> IOAPIC 2 PIN 16 |
| fixed IRQ entry for: PCI: 00:1d.1: INTB# -> IOAPIC 2 PIN 17 |
| fixed IRQ entry for: PCI: 00:1d.2: INTC# -> IOAPIC 2 PIN 18 |
| fixed IRQ entry for: PCI: 00:1d.7: INTA# -> IOAPIC 2 PIN 16 |
| no IRQ found for PCI: 00:1e.0 |
| no IRQ found for PCI: 00:1f.0 |
| fixed IRQ entry for: PCI: 00:1f.2: INTB# -> IOAPIC 2 PIN 17 |
| fixed IRQ entry for: PCI: 00:1f.3: INTC# -> IOAPIC 2 PIN 18 |
| no IRQ found for PCI: 02:00.0 |
| Wrote the mp table end at: 000f0010 - 000f0194 |
| MPTABLE len: 404 |
| Writing ISA IRQs |
| no IRQ found for PCI: 00:00.0 |
| fixed IRQ entry for: PCI: 00:02.0: INTA# -> IOAPIC 2 PIN 16 |
| no IRQ found for PCI: 00:02.1 |
| no IRQ found for PCI: 00:19.0 |
| fixed IRQ entry for: PCI: 00:1a.0: INTA# -> IOAPIC 2 PIN 16 |
| fixed IRQ entry for: PCI: 00:1a.1: INTB# -> IOAPIC 2 PIN 17 |
| fixed IRQ entry for: PCI: 00:1a.2: INTC# -> IOAPIC 2 PIN 18 |
| fixed IRQ entry for: PCI: 00:1a.7: INTC# -> IOAPIC 2 PIN 18 |
| fixed IRQ entry for: PCI: 00:1b.0: INTA# -> IOAPIC 2 PIN 16 |
| fixed IRQ entry for: PCI: 00:1c.0: INTA# -> IOAPIC 2 PIN 16 |
| no IRQ found for PCI: 00:1c.1 |
| no IRQ found for PCI: 00:1c.2 |
| no IRQ found for PCI: 00:1c.3 |
| fixed IRQ entry for: PCI: 00:1d.0: INTA# -> IOAPIC 2 PIN 16 |
| fixed IRQ entry for: PCI: 00:1d.1: INTB# -> IOAPIC 2 PIN 17 |
| fixed IRQ entry for: PCI: 00:1d.2: INTC# -> IOAPIC 2 PIN 18 |
| fixed IRQ entry for: PCI: 00:1d.7: INTA# -> IOAPIC 2 PIN 16 |
| no IRQ found for PCI: 00:1e.0 |
| no IRQ found for PCI: 00:1f.0 |
| fixed IRQ entry for: PCI: 00:1f.2: INTB# -> IOAPIC 2 PIN 17 |
| fixed IRQ entry for: PCI: 00:1f.3: INTC# -> IOAPIC 2 PIN 18 |
| no IRQ found for PCI: 02:00.0 |
| Wrote the mp table end at: 7d773010 - 7d773194 |
| MPTABLE len: 404 |
| MP table: 404 bytes. |
| CBFS: 'Master Header Locator' located CBFS at [10200:800000) |
| CBFS: Locating 'fallback/dsdt.aml' |
| CBFS: Found @ offset 38b40 size 3aa4 |
| CBFS: 'Master Header Locator' located CBFS at [10200:800000) |
| CBFS: Locating 'fallback/slic' |
| CBFS: 'fallback/slic' not found. |
| ACPI: Writing ACPI tables at 7d74f000. |
| ACPI: * FACS |
| ACPI: * DSDT |
| ACPI: * FADT |
| ACPI: added table 1/32, length now 40 |
| ACPI: * SSDT |
| Super I/O probe failed, skipping wacom |
| Found 1 CPU(s) with 2 core(s) each. |
| clocks between 800 and 2800 MHz. |
| adding 5 P-States between busratio 6 and a, incl. P0 |
| PSS: 2667MHz power 35000 control 0x4a2b status 0x4a2b |
| PSS: 2666MHz power 35000 control 0xa21 status 0xa21 |
| PSS: 2133MHz power 25000 control 0x81c status 0x81c |
| PSS: 1600MHz power 15000 control 0x617 status 0x617 |
| PSS: 800MHz power 12000 control 0x860d status 0x860d |
| clocks between 800 and 2800 MHz. |
| adding 5 P-States between busratio 6 and a, incl. P0 |
| PSS: 2667MHz power 35000 control 0x4a2b status 0x4a2b |
| PSS: 2666MHz power 35000 control 0xa21 status 0xa21 |
| PSS: 2133MHz power 25000 control 0x81c status 0x81c |
| PSS: 1600MHz power 15000 control 0x617 status 0x617 |
| PSS: 800MHz power 12000 control 0x860d status 0x860d |
| Generating ACPI PIRQ entries |
| ACPI: * H8 |
| H8: BDC installed |
| H8: WWAN detection not implemented. Assuming WWAN installed |
| ACPI: added table 2/32, length now 44 |
| ACPI: * MCFG |
| ACPI: added table 3/32, length now 48 |
| ACPI: * MADT |
| ACPI: added table 4/32, length now 52 |
| current = 7d7538b0 |
| ACPI: * DMAR |
| ACPI: added table 5/32, length now 56 |
| current = 7d753930 |
| GMA: Using CCFL backlight VBT |
| CBFS: 'Master Header Locator' located CBFS at [10200:800000) |
| CBFS: Locating 'data_ccfl.vbt' |
| CBFS: Found @ offset 3c640 size 5dd |
| Found a VBT of 3854 bytes after decompression |
| GMA: Found VBT in CBFS |
| GMA: Found valid VBT in CBFS |
| ACPI: * HPET |
| ACPI: added table 6/32, length now 60 |
| ACPI: done. |
| ACPI tables: 26992 bytes. |
| smbios_write_tables: 7d74e000 |
| SMBIOS tables: 683 bytes. |
| Writing table forward entry at 0x00000500 |
| Wrote coreboot table at: 00000500, 0x10 bytes, checksum 4267 |
| Writing coreboot table at 0x7d774000 |
| CBFS: 'Master Header Locator' located CBFS at [10200:800000) |
| CBFS: Locating 'cmos_layout.bin' |
| CBFS: Found @ offset 339c0 size 680 |
| 0. 0000000000000000-0000000000000fff: CONFIGURATION TABLES |
| 1. 0000000000001000-000000000009ffff: RAM |
| 2. 00000000000c0000-000000007d74dfff: RAM |
| 3. 000000007d74e000-000000007d78cfff: CONFIGURATION TABLES |
| 4. 000000007d78d000-000000007d7cdfff: RAMSTAGE |
| 5. 000000007d7ce000-000000007d7fffff: CONFIGURATION TABLES |
| 6. 000000007d800000-000000007fffffff: RESERVED |
| 7. 00000000f0000000-00000000f3ffffff: RESERVED |
| 8. 0000000100000000-000000027fffffff: RAM |
| CBFS: 'Master Header Locator' located CBFS at [10200:800000) |
| Wrote coreboot table at: 7d774000, 0x984 bytes, checksum a8cc |
| coreboot table: 2460 bytes. |
| IMD ROOT 0. 7d7ff000 00001000 |
| IMD SMALL 1. 7d7fe000 00001000 |
| CONSOLE 2. 7d7de000 00020000 |
| TIME STAMP 3. 7d7dd000 00000910 |
| ROMSTG STCK 4. 7d7d8000 00005000 |
| AFTER CAR 5. 7d7ce000 0000a000 |
| RAMSTAGE 6. 7d78c000 00042000 |
| SMM BACKUP 7. 7d77c000 00010000 |
| COREBOOT 8. 7d774000 00008000 |
| SMP TABLE 9. 7d773000 00001000 |
| ACPI 10. 7d74f000 00024000 |
| SMBIOS 11. 7d74e000 00000800 |
| IMD small region: |
| IMD ROOT 0. 7d7fec00 00000400 |
| USBDEBUG 1. 7d7feba0 00000050 |
| ROMSTAGE 2. 7d7feb80 00000004 |
| ACPI GNVS 3. 7d7fea80 00000100 |
| COREBOOTFWD 4. 7d7fea40 00000028 |
| BS: BS_WRITE_TABLES times (us): entry 0 run 28455 exit 0 |
| CBFS: 'Master Header Locator' located CBFS at [10200:800000) |
| CBFS: Locating 'fallback/payload' |
| CBFS: Found @ offset 3d280 size 97345 |
| Checking segment from ROM address 0xff84d4b8 |
| Checking segment from ROM address 0xff84d4d4 |
| Checking segment from ROM address 0xff84d4f0 |
| Loading segment from ROM address 0xff84d4b8 |
| code (compression=1) |
| New segment dstaddr 0x00008200 memsize 0x1b768 srcaddr 0xff84d50c filesize 0x98cf |
| Loading Segment: addr: 0x00008200 memsz: 0x000000000001b768 filesz: 0x00000000000098cf |
| using LZMA |
| Clearing Segment: addr: 0x000000000001bf23 memsz: 0x0000000000007a45 |
| Loading segment from ROM address 0xff84d4d4 |
| code (compression=1) |
| New segment dstaddr 0x00100000 memsize 0x1fc248 srcaddr 0xff856ddb filesize 0x8da22 |
| Loading Segment: addr: 0x00100000 memsz: 0x00000000001fc248 filesz: 0x000000000008da22 |
| using LZMA |
| Loading segment from ROM address 0xff84d4f0 |
| Entry Point 0x00008200 |
| BS: BS_PAYLOAD_LOAD times (us): entry 0 run 293736 exit 0 |
| ICH-NM10-PCH: watchdog disabled |
| Jumping to boot code at 00008200(7d774000) |
| error: no suitable video mode found. |
|
error: no video mode activated. |
|
error: file `/dejavusansmono.pf2' not found. |
|
error: file `/boot/grub/layouts/usqwerty.gkb' not found. |
|
GNU GRUB version 2.02 |
|
|
|
+----------------------------------------------------------------------------+||||||||||||||||||||||||+----------------------------------------------------------------------------+ Use the ^ and v keys to select which entry is highlighted. |
|
Press enter to boot the selected OS, `e' to edit the commands |
|
before booting or `c' for a command-line. *Load Operating System (incl. fully encrypted disks) [o] ? Search ISOLINUX menu (AHCI) [a] ? Search ISOLINUX menu (USB) [u] ? Search ISOLINUX menu (CD/DVD) [d] ? Load test configuration (grubtest.cfg) inside of CBFS [t] ? Search for GRUB2 configuration on external media [s] ? Poweroff [p] ? Reboot [r] ? ? ? ? ? The highlighted entry will be executed automatically in 1s. error: file `/boot/grub/fonts/unicode.pf2' not found. |
|
error: no suitable video mode found. |
|
GNU GRUB version 2.02 |
|
|
|
+----------------------------------------------------------------------------+||||||||||||||||||||||+----------------------------------------------------------------------------+ Use the ^ and v keys to select which entry is highlighted. |
|
Press enter to boot the selected OS, `e' to edit the commands |
|
before booting or `c' for a command-line. ESC to return |
|
previous menu. *Gentoo GNU/Linux ? Advanced options for Gentoo GNU/Linux ? ? ? ? ? ? ? ? ? ? The highlighted entry will be executed automatically in 3s. Loading Linux 5.1.2-gentoo ... |
|
Loading initial ramdisk ... |
|
|