blob: 912bd2db58071b61b41dc4ffba49ed7bf632b744 [file] [log] [blame]
[ 0.000000] random: get_random_bytes called from start_kernel+0x3d/0x456 with crng_init=0
[ 0.000000] Linux version 4.13.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 6.4.0 20171010 (Debian 6.4.0-8)) #1 SMP Debian 4.13.4-2 (2017-10-15)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.13.0-1-amd64 root=UUID=a994a1c5-a911-48bd-a468-4aa6a9728001 ro quiet iomem=relaxed
[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16
[ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000000c0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007fb14fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007fb15000-0x000000007fbfffff] type 16
[ 0.000000] BIOS-e820: [mem 0x000000007fc00000-0x000000008fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000026fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] random: fast init done
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: LENOVO 7470AE7/7470AE7, BIOS CBET4000 4.6-2030-g3ce678367c-dirty 11/07/2017
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x270000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-back
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 07FC00000 mask FFFC00000 uncachable
[ 0.000000] 1 base 080000000 mask FC0000000 uncachable
[ 0.000000] 2 base 0C0000000 mask FF0000000 uncachable
[ 0.000000] 3 base 0D0000000 mask FF0000000 write-combining
[ 0.000000] 4 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: last_pfn = 0x7fb15 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f0710-0x000f071f] mapped at [ffff8804800f0710]
[ 0.000000] Base memory trampoline at [ffff880480099000] 99000 size 24576
[ 0.000000] BRK [0x1dc757000, 0x1dc757fff] PGTABLE
[ 0.000000] BRK [0x1dc758000, 0x1dc758fff] PGTABLE
[ 0.000000] BRK [0x1dc759000, 0x1dc759fff] PGTABLE
[ 0.000000] BRK [0x1dc75a000, 0x1dc75afff] PGTABLE
[ 0.000000] BRK [0x1dc75b000, 0x1dc75bfff] PGTABLE
[ 0.000000] BRK [0x1dc75c000, 0x1dc75cfff] PGTABLE
[ 0.000000] BRK [0x1dc75d000, 0x1dc75dfff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x356b9000-0x36b53fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F08B0 000024 (v02 CORE )
[ 0.000000] ACPI: XSDT 0x000000007FB260E0 00005C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: FACP 0x000000007FB298C0 0000F4 (v03 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: DSDT 0x000000007FB26280 00363F (v03 COREv4 COREBOOT 20090419 INTL 20161222)
[ 0.000000] ACPI: FACS 0x000000007FB26240 000040
[ 0.000000] ACPI: SSDT 0x000000007FB299C0 0005BE (v02 CORE COREBOOT 0000002A CORE 0000002A)
[ 0.000000] ACPI: MCFG 0x000000007FB29F80 00003C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: TCPA 0x000000007FB29FC0 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: APIC 0x000000007FB2A000 000068 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: DMAR 0x000000007FB2A070 000078 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: HPET 0x000000007FB2C0F0 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000026fffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x26fff6000-0x26fffafff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000026fffffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009ffff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000007fb14fff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000026fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000026fffffff]
[ 0.000000] On node 0 totalpages: 2030260
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 22 pages reserved
[ 0.000000] DMA zone: 3999 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 8109 pages used for memmap
[ 0.000000] DMA32 zone: 518933 pages, LIFO batch:31
[ 0.000000] Normal zone: 23552 pages used for memmap
[ 0.000000] Normal zone: 1507328 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics memory at 0x0000000080000000-0x000000008fffffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x508
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000bffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7fb15000-0x7fbfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7fc00000-0x8fffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x90000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xffffffff]
[ 0.000000] e820: [mem 0x90000000-0xefffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] percpu: Embedded 38 pages/cpu @ffff8806efc00000 s115224 r8192 d32232 u1048576
[ 0.000000] pcpu-alloc: s115224 r8192 d32232 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1998513
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.13.0-1-amd64 root=UUID=a994a1c5-a911-48bd-a468-4aa6a9728001 ro quiet iomem=relaxed
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 7890768K/8121040K available (6587K kernel code, 1153K rwdata, 2964K rodata, 1472K init, 696K bss, 230272K reserved, 0K cma-reserved)
[ 0.000000] ftrace: allocating 28602 entries in 112 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS: 33024, nr_irqs: 440, preallocated irqs: 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 1866.717 MHz processor
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3733.43 BogoMIPS (lpj=7466868)
[ 0.004000] pid_max: default: 32768 minimum: 301
[ 0.004000] ACPI: Core revision 20170531
[ 0.010096] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.010169] Security Framework initialized
[ 0.010171] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.010178] AppArmor: AppArmor disabled by boot time parameter
[ 0.014156] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.016646] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.016751] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.016830] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.017187] CPU: Physical Processor ID: 0
[ 0.017188] CPU: Processor Core ID: 0
[ 0.017190] mce: CPU supports 6 MCE banks
[ 0.017199] CPU0: Thermal monitoring enabled (TM2)
[ 0.017204] process: using mwait in idle threads
[ 0.017210] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.017211] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[ 0.017372] Freeing SMP alternatives memory: 28K
[ 0.020147] smpboot: Max logical packages: 1
[ 0.020163] DMAR: Host address width 36
[ 0.020165] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.020175] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c9008020e30260 ecap 1000
[ 0.020176] DMAR: DRHD base: 0x000000fed91000 flags: 0x0
[ 0.020182] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c0000020630260 ecap 1000
[ 0.020183] DMAR: DRHD base: 0x000000fed93000 flags: 0x1
[ 0.020188] DMAR: dmar2: reg_base_addr fed93000 ver 1:0 cap c9008020630260 ecap 1000
[ 0.020574] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.064000] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU L9400 @ 1.86GHz (family: 0x6, model: 0x17, stepping: 0x6)
[ 0.064000] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.064000] ... version: 2
[ 0.064000] ... bit width: 40
[ 0.064000] ... generic registers: 2
[ 0.064000] ... value mask: 000000ffffffffff
[ 0.064000] ... max period: 000000007fffffff
[ 0.064000] ... fixed-purpose events: 3
[ 0.064000] ... event mask: 0000000700000003
[ 0.064000] Hierarchical SRCU implementation.
[ 0.064000] smp: Bringing up secondary CPUs ...
[ 0.064000] x86: Booting SMP configuration:
[ 0.064000] .... node #0, CPUs: #1
[ 0.142029] smp: Brought up 1 node, 2 CPUs
[ 0.142029] smpboot: Total of 2 processors activated (7466.89 BogoMIPS)
[ 0.142029] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.144477] devtmpfs: initialized
[ 0.144477] x86/mm: Memory block size: 128MB
[ 0.148586] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.148586] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.148586] pinctrl core: initialized pinctrl subsystem
[ 0.148586] NET: Registered protocol family 16
[ 0.148596] cpuidle: using governor ladder
[ 0.148596] cpuidle: using governor menu
[ 0.148596] PCCT header not found.
[ 0.148596] ACPI: bus type PCI registered
[ 0.148596] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.148596] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.148596] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.148596] PCI: Using configuration type 1 for base access
[ 0.149516] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.149516] ACPI: Added _OSI(Module Device)
[ 0.149516] ACPI: Added _OSI(Processor Device)
[ 0.149516] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.149516] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.149516] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.153269] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.154799] ACPI: EC: EC started
[ 0.154801] ACPI: EC: interrupt blocked
[ 0.154903] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
[ 0.154906] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.154909] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions
[ 0.154910] ACPI: Interpreter enabled
[ 0.154936] ACPI: (supports S0 S3 S4 S5)
[ 0.154938] ACPI: Using IOAPIC for interrupt routing
[ 0.154971] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.168199] acpi ACPI0003:01: ACPI dock station (docks/bays count: 1)
[ 0.168622] ACPI: Power Resource [FPWR] (off)
[ 0.169626] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.169632] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.169706] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.169719] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.169792] acpi PNP0A08:00: ignoring host bridge window [mem 0x000c4000-0x000c7fff window] (conflicts with Video ROM [mem 0x000c0000-0x000c67ff])
[ 0.170101] PCI host bridge to bus 0000:00
[ 0.170105] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.170107] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.170109] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.170111] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.170113] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.170115] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.170117] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.170119] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.170121] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.170124] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.170126] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.170128] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.170130] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.170132] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.170134] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[ 0.170136] pci_bus 0000:00: root bus resource [mem 0x90000000-0xfebfffff window]
[ 0.170138] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[ 0.170141] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.170152] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
[ 0.170181] DMAR: Forcing write-buffer flush capability
[ 0.170183] DMAR: Disabling IOMMU for graphics on this chipset
[ 0.170311] pci 0000:00:02.0: [8086:2a42] type 00 class 0x030000
[ 0.170326] pci 0000:00:02.0: reg 0x10: [mem 0xe1400000-0xe17fffff 64bit]
[ 0.170335] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.170341] pci 0000:00:02.0: reg 0x20: [io 0x3400-0x3407]
[ 0.170480] pci 0000:00:02.1: [8086:2a43] type 00 class 0x038000
[ 0.170494] pci 0000:00:02.1: reg 0x10: [mem 0xe1800000-0xe18fffff 64bit]
[ 0.170682] pci 0000:00:19.0: [8086:10f5] type 00 class 0x020000
[ 0.170711] pci 0000:00:19.0: reg 0x10: [mem 0xe1a00000-0xe1a1ffff]
[ 0.170722] pci 0000:00:19.0: reg 0x14: [mem 0xe1a24000-0xe1a24fff]
[ 0.170734] pci 0000:00:19.0: reg 0x18: [io 0x3000-0x301f]
[ 0.170825] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.170948] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[ 0.171011] pci 0000:00:1a.0: reg 0x20: [io 0x3020-0x303f]
[ 0.171188] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[ 0.171251] pci 0000:00:1a.1: reg 0x20: [io 0x3040-0x305f]
[ 0.171425] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
[ 0.171489] pci 0000:00:1a.2: reg 0x20: [io 0x3060-0x307f]
[ 0.171674] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[ 0.171703] pci 0000:00:1a.7: reg 0x10: [mem 0xe1a26000-0xe1a263ff]
[ 0.171813] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.171946] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[ 0.171979] pci 0000:00:1b.0: reg 0x10: [mem 0xe1a20000-0xe1a23fff 64bit]
[ 0.172103] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.172246] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[ 0.172358] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.172500] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
[ 0.172610] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.172753] pci 0000:00:1c.2: [8086:2944] type 01 class 0x060400
[ 0.172872] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.173015] pci 0000:00:1c.3: [8086:2946] type 01 class 0x060400
[ 0.173133] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.173278] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[ 0.173342] pci 0000:00:1d.0: reg 0x20: [io 0x3080-0x309f]
[ 0.173517] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[ 0.173581] pci 0000:00:1d.1: reg 0x20: [io 0x30a0-0x30bf]
[ 0.173755] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[ 0.173818] pci 0000:00:1d.2: reg 0x20: [io 0x30c0-0x30df]
[ 0.174002] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[ 0.174031] pci 0000:00:1d.7: reg 0x10: [mem 0xe1a27000-0xe1a273ff]
[ 0.174140] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.174268] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.174458] pci 0000:00:1f.0: [8086:2917] type 00 class 0x060100
[ 0.174730] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601
[ 0.174760] pci 0000:00:1f.2: reg 0x10: [io 0x3408-0x340f]
[ 0.174772] pci 0000:00:1f.2: reg 0x14: [io 0x3418-0x341b]
[ 0.174783] pci 0000:00:1f.2: reg 0x18: [io 0x3410-0x3417]
[ 0.174795] pci 0000:00:1f.2: reg 0x1c: [io 0x341c-0x341f]
[ 0.174806] pci 0000:00:1f.2: reg 0x20: [io 0x30e0-0x30ff]
[ 0.174818] pci 0000:00:1f.2: reg 0x24: [mem 0xe1a25000-0xe1a257ff]
[ 0.174886] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.175014] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[ 0.175043] pci 0000:00:1f.3: reg 0x10: [mem 0xe1a28000-0xe1a280ff 64bit]
[ 0.175074] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.175280] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.175358] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.175468] pci 0000:03:00.0: [168c:0030] type 00 class 0x028000
[ 0.175535] pci 0000:03:00.0: reg 0x10: [mem 0xe1900000-0xe191ffff 64bit]
[ 0.175632] pci 0000:03:00.0: reg 0x30: [mem 0xe1920000-0xe192ffff pref]
[ 0.175782] pci 0000:03:00.0: supports D1
[ 0.175784] pci 0000:03:00.0: PME# supported from D0 D1 D3hot
[ 0.184036] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.184045] pci 0000:00:1c.2: bridge window [mem 0xe1900000-0xe19fffff]
[ 0.184156] acpiphp: Slot [1] registered
[ 0.184195] pci 0000:04:00.0: [1b21:1042] type 00 class 0x0c0330
[ 0.184254] pci 0000:04:00.0: reg 0x10: [mem 0xe0800000-0xe0807fff 64bit]
[ 0.184479] pci 0000:04:00.0: PME# supported from D3hot
[ 0.196027] pci 0000:00:1c.3: PCI bridge to [bus 04]
[ 0.196032] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.196038] pci 0000:00:1c.3: bridge window [mem 0xe0000000-0xe08fffff]
[ 0.196046] pci 0000:00:1c.3: bridge window [mem 0xe0c00000-0xe13fffff 64bit pref]
[ 0.196230] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
[ 0.196244] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.196246] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.196249] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.196251] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000c3fff window] (subtractive decode)
[ 0.196253] pci 0000:00:1e.0: bridge window [mem 0x000c8000-0x000cbfff window] (subtractive decode)
[ 0.196256] pci 0000:00:1e.0: bridge window [mem 0x000cc000-0x000cffff window] (subtractive decode)
[ 0.196258] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[ 0.196260] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[ 0.196263] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[ 0.196265] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[ 0.196267] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[ 0.196270] pci 0000:00:1e.0: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
[ 0.196272] pci 0000:00:1e.0: bridge window [mem 0x000e8000-0x000ebfff window] (subtractive decode)
[ 0.196274] pci 0000:00:1e.0: bridge window [mem 0x000ec000-0x000effff window] (subtractive decode)
[ 0.196277] pci 0000:00:1e.0: bridge window [mem 0x000f0000-0x000fffff window] (subtractive decode)
[ 0.196279] pci 0000:00:1e.0: bridge window [mem 0x90000000-0xfebfffff window] (subtractive decode)
[ 0.196281] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode)
[ 0.196499] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 12 14 15) *11
[ 0.196590] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.196677] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12 14 15) *11
[ 0.196765] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.196852] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.196940] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.197028] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.197116] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.199668] ACPI: Enabled 1 GPEs in block 00 to 3F
[ 0.199824] ACPI: EC: interrupt unblocked
[ 0.199835] ACPI: EC: event unblocked
[ 0.199854] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.199857] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
[ 0.200043] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.200043] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.200043] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.200043] vgaarb: loaded
[ 0.200083] EDAC MC: Ver: 3.0.0
[ 0.200228] PCI: Using ACPI for IRQ routing
[ 0.202534] PCI: pci_cache_line_size set to 64 bytes
[ 0.202631] e820: reserve RAM buffer [mem 0x7fb15000-0x7fffffff]
[ 0.202791] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.202791] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.202791] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.205019] clocksource: Switched to clocksource hpet
[ 0.222010] VFS: Disk quotas dquot_6.6.0
[ 0.222045] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.222175] pnp: PnP ACPI init
[ 0.222343] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.222346] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.222349] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.222352] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.222355] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.222357] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.222360] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.222364] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.222370] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.223082] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.223087] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.223166] system 00:02: [io 0x0800-0x080f] has been reserved
[ 0.223169] system 00:02: [io 0x0500-0x057f] has been reserved
[ 0.223171] system 00:02: [io 0x0580-0x05bf] has been reserved
[ 0.223176] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.223218] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.223277] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.223328] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.223486] pnp: PnP ACPI: found 6 devices
[ 0.231066] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.231126] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.231144] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.231159] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.231166] pci 0000:00:1c.2: bridge window [mem 0xe1900000-0xe19fffff]
[ 0.231177] pci 0000:00:1c.3: PCI bridge to [bus 04]
[ 0.231181] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.231187] pci 0000:00:1c.3: bridge window [mem 0xe0000000-0xe08fffff]
[ 0.231192] pci 0000:00:1c.3: bridge window [mem 0xe0c00000-0xe13fffff 64bit pref]
[ 0.231200] pci 0000:00:1e.0: PCI bridge to [bus 05]
[ 0.231216] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.231219] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.231221] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.231223] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.231225] pci_bus 0000:00: resource 8 [mem 0x000c8000-0x000cbfff window]
[ 0.231227] pci_bus 0000:00: resource 9 [mem 0x000cc000-0x000cffff window]
[ 0.231230] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window]
[ 0.231232] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window]
[ 0.231234] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window]
[ 0.231236] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window]
[ 0.231238] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window]
[ 0.231240] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window]
[ 0.231242] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window]
[ 0.231244] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window]
[ 0.231247] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff window]
[ 0.231249] pci_bus 0000:00: resource 19 [mem 0x90000000-0xfebfffff window]
[ 0.231251] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed44fff window]
[ 0.231254] pci_bus 0000:03: resource 1 [mem 0xe1900000-0xe19fffff]
[ 0.231256] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff]
[ 0.231258] pci_bus 0000:04: resource 1 [mem 0xe0000000-0xe08fffff]
[ 0.231261] pci_bus 0000:04: resource 2 [mem 0xe0c00000-0xe13fffff 64bit pref]
[ 0.231263] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7 window]
[ 0.231265] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff window]
[ 0.231267] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.231270] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.231272] pci_bus 0000:05: resource 8 [mem 0x000c8000-0x000cbfff window]
[ 0.231274] pci_bus 0000:05: resource 9 [mem 0x000cc000-0x000cffff window]
[ 0.231276] pci_bus 0000:05: resource 10 [mem 0x000d0000-0x000d3fff window]
[ 0.231278] pci_bus 0000:05: resource 11 [mem 0x000d4000-0x000d7fff window]
[ 0.231280] pci_bus 0000:05: resource 12 [mem 0x000d8000-0x000dbfff window]
[ 0.231282] pci_bus 0000:05: resource 13 [mem 0x000dc000-0x000dffff window]
[ 0.231284] pci_bus 0000:05: resource 14 [mem 0x000e0000-0x000e3fff window]
[ 0.231286] pci_bus 0000:05: resource 15 [mem 0x000e4000-0x000e7fff window]
[ 0.231289] pci_bus 0000:05: resource 16 [mem 0x000e8000-0x000ebfff window]
[ 0.231291] pci_bus 0000:05: resource 17 [mem 0x000ec000-0x000effff window]
[ 0.231293] pci_bus 0000:05: resource 18 [mem 0x000f0000-0x000fffff window]
[ 0.231295] pci_bus 0000:05: resource 19 [mem 0x90000000-0xfebfffff window]
[ 0.231297] pci_bus 0000:05: resource 20 [mem 0xfed40000-0xfed44fff window]
[ 0.231422] NET: Registered protocol family 2
[ 0.231693] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.231993] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.232476] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.232544] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.232610] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.232721] NET: Registered protocol family 1
[ 0.232741] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.235342] PCI: CLS 64 bytes, default 64
[ 0.235398] Unpacking initramfs...
[ 0.841979] Freeing initrd memory: 21100K
[ 0.842157] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.842163] software IO TLB [mem 0x7bb15000-0x7fb15000] (64MB) mapped at [ffff8804fbb15000-ffff8804ffb14fff]
[ 0.842696] audit: initializing netlink subsys (disabled)
[ 0.842797] audit: type=2000 audit(1510076041.842:1): state=initialized audit_enabled=0 res=1
[ 0.843315] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[ 0.843346] zbud: loaded
[ 1.517714] Key type asymmetric registered
[ 1.517716] Asymmetric key parser 'x509' registered
[ 1.517739] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 1.517780] io scheduler noop registered
[ 1.517782] io scheduler deadline registered
[ 1.517796] io scheduler cfq registered (default)
[ 1.517797] io scheduler mq-deadline registered
[ 1.519028] pcieport 0000:00:1c.0: Signaling PME with IRQ 24
[ 1.519067] pcieport 0000:00:1c.1: Signaling PME with IRQ 25
[ 1.519102] pcieport 0000:00:1c.2: Signaling PME with IRQ 26
[ 1.519132] pcieport 0000:00:1c.3: Signaling PME with IRQ 27
[ 1.519179] efifb: probing for efifb
[ 1.519197] efifb: framebuffer at 0xd0000000, using 5120k, total 5120k
[ 1.519198] efifb: mode is 1440x900x32, linelength=5760, pages=1
[ 1.519199] efifb: scrolling: redraw
[ 1.519201] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.523879] Console: switching to colour frame buffer device 180x56
[ 1.528379] fb0: EFI VGA frame buffer device
[ 1.528391] intel_idle: does not run on family 6 model 23
[ 1.536707] Monitor-Mwait will be used to enter C-1 state
[ 1.536714] Monitor-Mwait will be used to enter C-2 state
[ 1.536718] Monitor-Mwait will be used to enter C-3 state
[ 1.536721] tsc: Marking TSC unstable due to TSC halts in idle
[ 1.537040] GHES: HEST is not enabled!
[ 1.537164] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.537869] Linux agpgart interface v0.103
[ 1.538048] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 1.538049] AMD IOMMUv2 functionality not available on this system
[ 1.538317] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.549270] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.549276] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.549503] mousedev: PS/2 mouse device common for all mice
[ 1.549564] rtc_cmos 00:03: RTC can wake from S4
[ 1.549758] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.549789] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.549843] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.550098] NET: Registered protocol family 10
[ 1.550426] Segment Routing with IPv6
[ 1.550446] mip6: Mobile IPv6
[ 1.550448] NET: Registered protocol family 17
[ 1.550451] mpls_gso: MPLS GSO support
[ 1.550644] microcode: sig=0x10676, pf=0x80, revision=0x0
[ 1.550741] microcode: Microcode Update Driver: v2.2.
[ 1.550996] registered taskstats version 1
[ 1.551016] zswap: loaded using pool lzo/zbud
[ 1.551164] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[ 1.551642] rtc_cmos 00:03: setting system clock to 2017-11-07 17:34:03 UTC (1510076043)
[ 1.551682] PM: Hibernation image not present or could not be loaded.
[ 1.555467] Freeing unused kernel memory: 1472K
[ 1.555469] Write protecting the kernel read-only data: 12288k
[ 1.556297] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.556324] Freeing unused kernel memory: 1592K
[ 1.560888] Freeing unused kernel memory: 1132K
[ 1.563302] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.797178] pps_core: LinuxPPS API ver. 1 registered
[ 1.797180] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 1.797569] PTP clock support registered
[ 1.798681] ACPI: bus type USB registered
[ 1.798716] usbcore: registered new interface driver usbfs
[ 1.798730] usbcore: registered new interface driver hub
[ 1.799419] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 1.799420] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.799707] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 1.802164] usbcore: registered new device driver usb
[ 1.802893] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.803318] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.805898] ehci-pci: EHCI PCI platform driver
[ 1.806740] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 1.806995] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.806996] ACPI: Thermal Zone [THM0] (58 C)
[ 1.807817] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.807819] ACPI: Thermal Zone [THM1] (46 C)
[ 1.824230] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 1.824243] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 1
[ 1.826642] SCSI subsystem initialized
[ 1.834227] xhci_hcd 0000:04:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x00080000
[ 1.834450] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.834453] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.834455] usb usb1: Product: xHCI Host Controller
[ 1.834457] usb usb1: Manufacturer: Linux 4.13.0-1-amd64 xhci-hcd
[ 1.834459] usb usb1: SerialNumber: 0000:04:00.0
[ 1.834633] hub 1-0:1.0: USB hub found
[ 1.834647] hub 1-0:1.0: 2 ports detected
[ 1.834795] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 1.834800] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 2
[ 1.834832] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.834860] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.834863] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.834865] usb usb2: Product: xHCI Host Controller
[ 1.834867] usb usb2: Manufacturer: Linux 4.13.0-1-amd64 xhci-hcd
[ 1.834869] usb usb2: SerialNumber: 0000:04:00.0
[ 1.835009] hub 2-0:1.0: USB hub found
[ 1.835023] hub 2-0:1.0: 2 ports detected
[ 1.835302] libata version 3.00 loaded.
[ 1.852093] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x35d0b56e267, max_idle_ns: 881590547232 ns
[ 2.010633] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:1f:16:18:ee:48
[ 2.010636] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 2.010665] e1000e 0000:00:19.0 eth0: MAC: 7, PHY: 8, PBA No: FFFFFF-0FF
[ 2.010872] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 2.010882] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 2.010892] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 2.010927] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00003020
[ 2.011040] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.011043] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.011046] usb usb3: Product: UHCI Host Controller
[ 2.011048] usb usb3: Manufacturer: Linux 4.13.0-1-amd64 uhci_hcd
[ 2.011050] usb usb3: SerialNumber: 0000:00:1a.0
[ 2.011213] hub 3-0:1.0: USB hub found
[ 2.011224] hub 3-0:1.0: 2 ports detected
[ 2.011512] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 2.011519] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 2.011528] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 2.011558] uhci_hcd 0000:00:1a.1: irq 17, io base 0x00003040
[ 2.011637] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.011640] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.011642] usb usb4: Product: UHCI Host Controller
[ 2.011644] usb usb4: Manufacturer: Linux 4.13.0-1-amd64 uhci_hcd
[ 2.011646] usb usb4: SerialNumber: 0000:00:1a.1
[ 2.011804] hub 4-0:1.0: USB hub found
[ 2.012098] hub 4-0:1.0: 2 ports detected
[ 2.012604] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 2.012611] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 5
[ 2.012627] ehci-pci 0000:00:1a.7: debug port 1
[ 2.016539] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[ 2.016773] ehci-pci 0000:00:1a.7: irq 18, io mem 0xe1a26000
[ 2.032123] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 2.032173] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.032176] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.032178] usb usb5: Product: EHCI Host Controller
[ 2.032180] usb usb5: Manufacturer: Linux 4.13.0-1-amd64 ehci_hcd
[ 2.032182] usb usb5: SerialNumber: 0000:00:1a.7
[ 2.032386] hub 5-0:1.0: USB hub found
[ 2.032395] hub 5-0:1.0: 6 ports detected
[ 2.060160] hub 3-0:1.0: USB hub found
[ 2.060169] hub 3-0:1.0: 2 ports detected
[ 2.088174] hub 4-0:1.0: USB hub found
[ 2.088183] hub 4-0:1.0: 2 ports detected
[ 2.088429] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 2.088437] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 6
[ 2.088452] ehci-pci 0000:00:1d.7: debug port 1
[ 2.092372] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 2.092378] ehci-pci 0000:00:1d.7: irq 16, io mem 0xe1a27000
[ 2.108128] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.108177] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.108180] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.108182] usb usb6: Product: EHCI Host Controller
[ 2.108184] usb usb6: Manufacturer: Linux 4.13.0-1-amd64 ehci_hcd
[ 2.108186] usb usb6: SerialNumber: 0000:00:1d.7
[ 2.108389] hub 6-0:1.0: USB hub found
[ 2.108398] hub 6-0:1.0: 6 ports detected
[ 2.108820] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 2.110493] ahci 0000:00:1f.2: version 3.0
[ 2.110709] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 2.110737] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[ 2.110740] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ccc
[ 2.111521] scsi host0: ahci
[ 2.111673] scsi host1: ahci
[ 2.111806] scsi host2: ahci
[ 2.111943] scsi host3: ahci
[ 2.112026] ata1: SATA max UDMA/133 abar m2048@0xe1a25000 port 0xe1a25100 irq 32
[ 2.112029] ata2: SATA max UDMA/133 abar m2048@0xe1a25000 port 0xe1a25180 irq 32
[ 2.112030] ata3: DUMMY
[ 2.112031] ata4: DUMMY
[ 2.112216] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 2.112224] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 7
[ 2.112235] uhci_hcd 0000:00:1a.2: detected 2 ports
[ 2.112258] uhci_hcd 0000:00:1a.2: irq 18, io base 0x00003060
[ 2.112374] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.112377] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.112379] usb usb7: Product: UHCI Host Controller
[ 2.112381] usb usb7: Manufacturer: Linux 4.13.0-1-amd64 uhci_hcd
[ 2.112383] usb usb7: SerialNumber: 0000:00:1a.2
[ 2.112535] hub 7-0:1.0: USB hub found
[ 2.112546] hub 7-0:1.0: 2 ports detected
[ 2.112815] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.112823] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 8
[ 2.112831] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 2.112856] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00003080
[ 2.113063] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.113065] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.113068] usb usb8: Product: UHCI Host Controller
[ 2.113070] usb usb8: Manufacturer: Linux 4.13.0-1-amd64 uhci_hcd
[ 2.113072] usb usb8: SerialNumber: 0000:00:1d.0
[ 2.113256] hub 8-0:1.0: USB hub found
[ 2.113266] hub 8-0:1.0: 2 ports detected
[ 2.113532] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.113541] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 9
[ 2.113549] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 2.113573] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000030a0
[ 2.113741] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.113744] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.113746] usb usb9: Product: UHCI Host Controller
[ 2.113748] usb usb9: Manufacturer: Linux 4.13.0-1-amd64 uhci_hcd
[ 2.113750] usb usb9: SerialNumber: 0000:00:1d.1
[ 2.113915] hub 9-0:1.0: USB hub found
[ 2.113926] hub 9-0:1.0: 2 ports detected
[ 2.114190] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.114197] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 10
[ 2.114207] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 2.114230] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000030c0
[ 2.114364] usb usb10: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.114367] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.114369] usb usb10: Product: UHCI Host Controller
[ 2.114371] usb usb10: Manufacturer: Linux 4.13.0-1-amd64 uhci_hcd
[ 2.114373] usb usb10: SerialNumber: 0000:00:1d.2
[ 2.114533] hub 10-0:1.0: USB hub found
[ 2.114542] hub 10-0:1.0: 2 ports detected
[ 2.428353] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.430859] ata1.00: NCQ Send/Recv Log not supported
[ 2.430862] ata1.00: ATA-9: SAMSUNG MZMTE512HMHP-000MV, EXT42M0Q, max UDMA/133
[ 2.430864] ata1.00: 1000215216 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.431532] ata1.00: NCQ Send/Recv Log not supported
[ 2.431605] ata1.00: configured for UDMA/133
[ 2.431820] scsi 0:0:0:0: Direct-Access ATA SAMSUNG MZMTE512 2M0Q PQ: 0 ANSI: 5
[ 2.436096] usb 6-4: new high-speed USB device number 2 using ehci-pci
[ 2.556123] usb 4-2: new full-speed USB device number 2 using uhci_hcd
[ 2.585344] usb 6-4: config 1 has an invalid interface number: 12 but max is 4
[ 2.585347] usb 6-4: config 1 has an invalid interface number: 13 but max is 4
[ 2.585349] usb 6-4: config 1 has an invalid interface number: 13 but max is 4
[ 2.585351] usb 6-4: config 1 has no interface number 1
[ 2.585353] usb 6-4: config 1 has no interface number 4
[ 2.585987] usb 6-4: New USB device found, idVendor=1199, idProduct=9071
[ 2.585990] usb 6-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.585992] usb 6-4: Product: Sierra Wireless MC7430 Qualcomm® Snapdragon™ X7 LTE-A
[ 2.585994] usb 6-4: Manufacturer: Sierra Wireless, Incorporated
[ 2.585996] usb 6-4: SerialNumber: LU55020180021009
[ 2.691992] psmouse serio1: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 2.709219] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input2
[ 2.742163] usb 4-2: New USB device found, idVendor=0a5c, idProduct=21e6
[ 2.742165] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.742168] usb 4-2: Product: BCM20702A0
[ 2.742170] usb 4-2: Manufacturer: Broadcom Corp
[ 2.742172] usb 4-2: SerialNumber: 2CD05A7FAEEC
[ 2.772309] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.776387] ata2.00: ATAPI: HL-DT-ST DVDRW GS22N, CP06, max UDMA/133
[ 2.781210] ata2.00: configured for UDMA/133
[ 2.789735] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRW GS22N CP06 PQ: 0 ANSI: 5
[ 2.805823] sd 0:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/477 GiB)
[ 2.805842] sd 0:0:0:0: [sda] Write Protect is off
[ 2.805845] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.805875] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.809479] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10
[ 2.810449] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.819084] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda caddy
[ 2.819086] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.819233] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 3.052022] raid6: sse2x1 gen() 2574 MB/s
[ 3.120020] raid6: sse2x1 xor() 2694 MB/s
[ 3.188009] raid6: sse2x2 gen() 3503 MB/s
[ 3.256016] raid6: sse2x2 xor() 3334 MB/s
[ 3.324013] raid6: sse2x4 gen() 4682 MB/s
[ 3.392011] raid6: sse2x4 xor() 3760 MB/s
[ 3.392012] raid6: using algorithm sse2x4 gen() 4682 MB/s
[ 3.392013] raid6: .... xor() 3760 MB/s, rmw enabled
[ 3.392015] raid6: using ssse3x2 recovery algorithm
[ 3.392330] xor: measuring software checksum speed
[ 3.432030] prefetch64-sse: 6539.000 MB/sec
[ 3.472029] generic_sse: 5748.000 MB/sec
[ 3.472030] xor: using function: prefetch64-sse (6539.000 MB/sec)
[ 3.472327] async_tx: api initialized (async)
[ 3.512129] usb 5-5: new high-speed USB device number 3 using ehci-pci
[ 3.538382] Btrfs loaded, crc32c=crc32c-generic
[ 3.660453] usb 5-5: New USB device found, idVendor=17ef, idProduct=1005
[ 3.660456] usb 5-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.660745] hub 5-5:1.0: USB hub found
[ 3.660823] hub 5-5:1.0: 4 ports detected
[ 3.806087] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 3.938094] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 3.950616] systemd[1]: systemd 235 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
[ 3.950783] systemd[1]: Detected architecture x86-64.
[ 3.950979] systemd[1]: Set hostname to <universi-if9ee1>.
[ 4.123086] systemd[1]: Reached target Libvirt guests shutdown.
[ 4.123423] systemd[1]: Created slice System Slice.
[ 4.123507] systemd[1]: Listening on Journal Socket (/dev/log).
[ 4.123556] systemd[1]: Listening on RPCbind Server Activation Socket.
[ 4.123605] systemd[1]: Listening on udev Kernel Socket.
[ 4.124485] systemd[1]: Mounting RPC Pipe File System...
[ 4.124637] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 4.151724] RPC: Registered named UNIX socket transport module.
[ 4.151726] RPC: Registered udp transport module.
[ 4.151727] RPC: Registered tcp transport module.
[ 4.151728] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 4.213548] EXT4-fs (sda4): re-mounted. Opts: discard,user_xattr,errors=remount-ro
[ 4.214892] lp: driver loaded but no devices found
[ 4.233447] ppdev: user-space parallel port driver
[ 4.285214] drbd: initialized. Version: 8.4.7 (api:1/proto:86-101)
[ 4.285217] drbd: srcversion: 2DCC561E7F1E3D63526E90D
[ 4.285218] drbd: registered as block device major 147
[ 4.535033] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2a/PNP0C09:00/PNP0C0E:00/input/input3
[ 4.535062] ACPI: Sleep Button [SLPB]
[ 4.536465] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2a/PNP0C09:00/PNP0C0D:00/input/input4
[ 4.536618] ACPI: Lid Switch [LID]
[ 4.536702] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 4.536717] ACPI: Power Button [PWRF]
[ 4.548031] ACPI: AC Adapter [AC] (on-line)
[ 4.548059] ACPI Exception: AE_NOT_FOUND, Error reading AC Adapter state (20170531/ac-139)
[ 4.585263] Non-volatile memory driver v1.3
[ 4.591746] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 4.597263] ACPI: Battery Slot [BAT0] (battery present)
[ 4.597414] ACPI: Battery Slot [BAT1] (battery absent)
[ 4.616827] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[ 4.616829] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 4.616830] thinkpad_acpi: ThinkPad BIOS CBET4000 4.6-2030-g3ce678367c-dirty, EC 7XHT25WW-3.6
[ 4.616831] thinkpad_acpi: Lenovo ThinkPad X200s, model 7470AE7
[ 4.619341] thinkpad_hwmon thinkpad_hwmon: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 4.619619] thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode
[ 4.619715] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 4.619716] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 4.632699] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 4.632914] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 4.636188] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input6
[ 4.649178] snd_hda_codec_conexant hdaudioC0D0: CX20561 (Hermosa): BIOS auto-probing.
[ 4.649731] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20561 (Hermosa): line_outs=1 (0x1a/0x0/0x0/0x0/0x0) type:speaker
[ 4.649733] snd_hda_codec_conexant hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 4.649736] snd_hda_codec_conexant hdaudioC0D0: hp_outs=2 (0x19/0x16/0x0/0x0/0x0)
[ 4.649737] snd_hda_codec_conexant hdaudioC0D0: mono: mono_out=0x0
[ 4.649739] snd_hda_codec_conexant hdaudioC0D0: dig-out=0x1c/0x0
[ 4.649740] snd_hda_codec_conexant hdaudioC0D0: inputs:
[ 4.649742] snd_hda_codec_conexant hdaudioC0D0: Mic=0x18
[ 4.649744] snd_hda_codec_conexant hdaudioC0D0: Internal Mic=0x1d
[ 4.649746] snd_hda_codec_conexant hdaudioC0D0: Dock Mic=0x17
[ 4.650838] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication
[ 4.682165] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 4.682901] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 4.682937] input: HDA Intel Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 4.682971] input: HDA Intel Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 4.683005] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 4.697217] ath: phy0: ASPM enabled: 0x43
[ 4.697220] ath: EEPROM regdomain: 0x6a
[ 4.697221] ath: EEPROM indicates we should expect a direct regpair map
[ 4.697223] ath: Country alpha2 being used: 00
[ 4.697223] ath: Regpair used: 0x6a
[ 4.709841] pci 0000:00:00.0: Intel GM45 Chipset
[ 4.709863] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 4.711493] pci 0000:00:00.0: detected 262144K stolen memory
[ 4.711528] [drm] Memory usable by graphics device = 2048M
[ 4.711532] checking generic (d0000000 500000) vs hw (d0000000 10000000)
[ 4.711534] fb: switching to inteldrmfb from EFI VGA
[ 4.711586] Console: switching to colour dummy device 80x25
[ 4.712993] [drm] Replacing VGA console driver
[ 4.715762] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 4.716237] ieee80211 phy0: Atheros AR9300 Rev:3 mem=0xffffa48f81760000, irq=18
[ 4.772167] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 4.772168] [drm] Driver supports precise vblank timestamp query.
[ 4.772409] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 4.976263] [drm] RC6 disabled, disabling runtime PM support
[ 4.976692] [drm] Initialized i915 1.6.0 20170619 for 0000:00:02.0 on minor 0
[ 4.976879] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 4.978255] acpi device:04: registered as cooling_device3
[ 4.978336] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input12
[ 4.978483] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20170531/utaddress-247)
[ 4.978489] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.978491] ACPI Warning: SystemIO range 0x00000000000005B0-0x00000000000005BF conflicts with OpRegion 0x0000000000000580-0x00000000000005BB (\GPIO) (20170531/utaddress-247)
[ 4.978495] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.978496] ACPI Warning: SystemIO range 0x0000000000000580-0x00000000000005AF conflicts with OpRegion 0x0000000000000580-0x00000000000005BB (\GPIO) (20170531/utaddress-247)
[ 4.978500] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.978500] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 5.043258] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.043299] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 5.208344] EXT4-fs (sda3): mounting ext2 file system using the ext4 subsystem
[ 5.213927] EXT4-fs (sda3): mounted filesystem without journal. Opts: discard,user_xattr
[ 5.282904] EXT4-fs (sda10): mounted filesystem with ordered data mode. Opts: discard,user_xattr
[ 5.307223] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: discard,user_xattr
[ 5.311815] FAT-fs (sda2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 5.314306] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: discard,user_xattr
[ 5.332562] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: discard,user_xattr
[ 5.338983] input: PC Speaker as /devices/platform/pcspkr/input/input13
[ 5.349276] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: discard,user_xattr
[ 5.357145] systemd-journald[243]: Received request to flush runtime journal from PID 1
[ 5.370410] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: discard,user_xattr
[ 5.410074] intel_powerclamp: No package C-state available
[ 5.634052] iTCO_vendor_support: vendor-support=0
[ 5.634676] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 5.634730] iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x0560)
[ 5.634840] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 5.651121] random: crng init done
[ 5.940919] usbcore: registered new interface driver usbserial
[ 5.940936] usbcore: registered new interface driver usbserial_generic
[ 5.940948] usbserial: USB Serial support registered for generic
[ 5.942709] usbcore: registered new interface driver qcserial
[ 5.942722] usbserial: USB Serial support registered for Qualcomm USB modem
[ 5.943064] qcserial 6-4:1.0: Qualcomm USB modem converter detected
[ 5.943149] usb 6-4: Qualcomm USB modem converter now attached to ttyUSB0
[ 5.943424] qcserial 6-4:1.2: Qualcomm USB modem converter detected
[ 5.943493] usb 6-4: Qualcomm USB modem converter now attached to ttyUSB1
[ 5.945655] qcserial 6-4:1.3: Qualcomm USB modem converter detected
[ 5.945789] usb 6-4: Qualcomm USB modem converter now attached to ttyUSB2
[ 5.954122] usbcore: registered new interface driver cdc_ncm
[ 5.956906] usbcore: registered new interface driver cdc_wdm
[ 5.982058] cdc_mbim 6-4:1.12: cdc-wdm0: USB WDM device
[ 5.982458] cdc_mbim 6-4:1.12 wwan0: register 'cdc_mbim' at usb-0000:00:1d.7-4, CDC MBIM, d2:96:0f:39:36:ab
[ 5.983045] usbcore: registered new interface driver cdc_mbim
[ 5.985235] cdc_mbim 6-4:1.12 wwp0s29f7u4i12: renamed from wwan0
[ 6.239238] Bluetooth: Core ver 2.22
[ 6.239338] NET: Registered protocol family 31
[ 6.239339] Bluetooth: HCI device and connection manager initialized
[ 6.239343] Bluetooth: HCI socket layer initialized
[ 6.239346] Bluetooth: L2CAP socket layer initialized
[ 6.239354] Bluetooth: SCO socket layer initialized
[ 6.250141] usbcore: registered new interface driver btusb
[ 6.258222] nfc: nfc_init: NFC Core ver 0.1
[ 6.258248] NET: Registered protocol family 39
[ 6.368130] Bluetooth: hci0: BCM: chip id 63
[ 6.370128] Bluetooth: hci0: BCM: features 0x07
[ 6.402132] Bluetooth: hci0: BCM20702A
[ 6.404127] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000
[ 6.404521] bluetooth hci0: firmware: failed to load brcm/BCM20702A1-0a5c-21e6.hcd (-2)
[ 6.404529] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-21e6.hcd failed with error -2
[ 6.404531] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-21e6.hcd not found
[ 6.462228] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 6.462230] Bluetooth: BNEP filters: protocol multicast
[ 6.462234] Bluetooth: BNEP socket layer initialized
[ 6.652126] fbcon: inteldrmfb (fb0) is primary device
[ 7.201737] Console: switching to colour frame buffer device 180x56
[ 7.225225] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 7.522203] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 7.544455] Ebtables v2.0 registered
[ 15.229790] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 15.440283] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 15.455690] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 15.464762] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 15.478559] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 16.410752] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 17.644887] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 17.645033] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 22.875630] thinkpad_ec: loading out-of-tree module taints kernel.
[ 22.876136] thinkpad_ec: thinkpad_ec 0.42 loaded.
[ 22.877124] tp_smapi 0.42 loading...
[ 22.877131] SMAPI not supported (ID=0x67)
[ 22.877134] tp_smapi init failed (ret=-6)!
[ 22.968741] tp_smapi 0.42 loading...
[ 22.968750] SMAPI not supported (ID=0x67)
[ 22.968754] tp_smapi init failed (ret=-6)!
[ 24.679485] Bluetooth: RFCOMM TTY layer initialized
[ 24.679492] Bluetooth: RFCOMM socket layer initialized
[ 24.679498] Bluetooth: RFCOMM ver 1.11