blob: fc1613336c89e288bc947f0e0f9b210d7f1eafdb [file] [log] [blame]
[ 0.000000] random: get_random_bytes called from start_kernel+0x3d/0x456 with crng_init=0
[ 0.000000] Linux version 4.13.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 6.4.0 20170920 (Debian 6.4.0-7)) #1 SMP Debian 4.13.4-1 (2017-10-01)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.13.0-1-amd64 root=UUID=a994a1c5-a911-48bd-a468-4aa6a9728001 ro quiet iomem=relaxed
[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16
[ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000000c0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007fb16fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007fb17000-0x000000007fbfffff] type 16
[ 0.000000] BIOS-e820: [mem 0x000000007fc00000-0x000000008fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000026fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] random: fast init done
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: LENOVO 7470AE7/7470AE7, BIOS CBET4000 4.6-1757-gfe5030eceb 10/14/2017
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x270000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-back
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 07FC00000 mask FFFC00000 uncachable
[ 0.000000] 1 base 080000000 mask FC0000000 uncachable
[ 0.000000] 2 base 0C0000000 mask FF0000000 uncachable
[ 0.000000] 3 base 0D0000000 mask FF0000000 write-combining
[ 0.000000] 4 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: last_pfn = 0x7fb17 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f0710-0x000f071f] mapped at [ffff8848000f0710]
[ 0.000000] Base memory trampoline at [ffff884800099000] 99000 size 24576
[ 0.000000] BRK [0x57d57000, 0x57d57fff] PGTABLE
[ 0.000000] BRK [0x57d58000, 0x57d58fff] PGTABLE
[ 0.000000] BRK [0x57d59000, 0x57d59fff] PGTABLE
[ 0.000000] BRK [0x57d5a000, 0x57d5afff] PGTABLE
[ 0.000000] BRK [0x57d5b000, 0x57d5bfff] PGTABLE
[ 0.000000] BRK [0x57d5c000, 0x57d5cfff] PGTABLE
[ 0.000000] BRK [0x57d5d000, 0x57d5dfff] PGTABLE
[ 0.000000] BRK [0x57d5e000, 0x57d5efff] PGTABLE
[ 0.000000] BRK [0x57d5f000, 0x57d5ffff] PGTABLE
[ 0.000000] BRK [0x57d60000, 0x57d60fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x356c9000-0x36b5bfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F08B0 000024 (v02 CORE )
[ 0.000000] ACPI: XSDT 0x000000007FB280E0 00005C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: FACP 0x000000007FB2B760 0000F4 (v03 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: DSDT 0x000000007FB28280 0034D3 (v03 COREv4 COREBOOT 20090419 INTL 20161222)
[ 0.000000] ACPI: FACS 0x000000007FB28240 000040
[ 0.000000] ACPI: SSDT 0x000000007FB2B860 0005A0 (v02 CORE COREBOOT 0000002A CORE 0000002A)
[ 0.000000] ACPI: MCFG 0x000000007FB2BE00 00003C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: TCPA 0x000000007FB2BE40 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: APIC 0x000000007FB2BE80 000068 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: DMAR 0x000000007FB2BEF0 000078 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: HPET 0x000000007FB2DF70 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000026fffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x26fff9000-0x26fffdfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000026fffffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009ffff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000007fb16fff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000026fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000026fffffff]
[ 0.000000] On node 0 totalpages: 2030262
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 22 pages reserved
[ 0.000000] DMA zone: 3999 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 8109 pages used for memmap
[ 0.000000] DMA32 zone: 518935 pages, LIFO batch:31
[ 0.000000] Normal zone: 23552 pages used for memmap
[ 0.000000] Normal zone: 1507328 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics memory at 0x0000000080000000-0x000000008fffffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x508
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000bffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7fb17000-0x7fbfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7fc00000-0x8fffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x90000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xffffffff]
[ 0.000000] e820: [mem 0x90000000-0xefffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] percpu: Embedded 38 pages/cpu @ffff884a6fc00000 s115224 r8192 d32232 u1048576
[ 0.000000] pcpu-alloc: s115224 r8192 d32232 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1998515
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.13.0-1-amd64 root=UUID=a994a1c5-a911-48bd-a468-4aa6a9728001 ro quiet iomem=relaxed
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 7890820K/8121048K available (6587K kernel code, 1153K rwdata, 2964K rodata, 1472K init, 696K bss, 230228K reserved, 0K cma-reserved)
[ 0.000000] ftrace: allocating 28602 entries in 112 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS: 33024, nr_irqs: 440, preallocated irqs: 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 1866.698 MHz processor
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3733.39 BogoMIPS (lpj=7466792)
[ 0.004000] pid_max: default: 32768 minimum: 301
[ 0.004000] ACPI: Core revision 20170531
[ 0.010089] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.010162] Security Framework initialized
[ 0.010164] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.010172] AppArmor: AppArmor disabled by boot time parameter
[ 0.014147] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.016629] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.016734] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.016813] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.017166] CPU: Physical Processor ID: 0
[ 0.017167] CPU: Processor Core ID: 0
[ 0.017169] mce: CPU supports 6 MCE banks
[ 0.017178] CPU0: Thermal monitoring enabled (TM2)
[ 0.017183] process: using mwait in idle threads
[ 0.017189] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.017190] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[ 0.017353] Freeing SMP alternatives memory: 28K
[ 0.020147] smpboot: Max logical packages: 1
[ 0.020156] DMAR: Host address width 36
[ 0.020158] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.020172] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c9008020e30260 ecap 1000
[ 0.020173] DMAR: DRHD base: 0x000000fed91000 flags: 0x0
[ 0.020179] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c0000020630260 ecap 1000
[ 0.020181] DMAR: DRHD base: 0x000000fed93000 flags: 0x1
[ 0.020186] DMAR: dmar2: reg_base_addr fed93000 ver 1:0 cap c9008020630260 ecap 1000
[ 0.020573] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.064000] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU L9400 @ 1.86GHz (family: 0x6, model: 0x17, stepping: 0x6)
[ 0.064000] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.064000] ... version: 2
[ 0.064000] ... bit width: 40
[ 0.064000] ... generic registers: 2
[ 0.064000] ... value mask: 000000ffffffffff
[ 0.064000] ... max period: 000000007fffffff
[ 0.064000] ... fixed-purpose events: 3
[ 0.064000] ... event mask: 0000000700000003
[ 0.064000] Hierarchical SRCU implementation.
[ 0.064000] smp: Bringing up secondary CPUs ...
[ 0.064000] x86: Booting SMP configuration:
[ 0.064000] .... node #0, CPUs: #1
[ 0.142030] smp: Brought up 1 node, 2 CPUs
[ 0.142030] smpboot: Total of 2 processors activated (7466.86 BogoMIPS)
[ 0.142030] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.144477] devtmpfs: initialized
[ 0.144477] x86/mm: Memory block size: 128MB
[ 0.148604] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.148604] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.148604] pinctrl core: initialized pinctrl subsystem
[ 0.148604] NET: Registered protocol family 16
[ 0.148604] cpuidle: using governor ladder
[ 0.148604] cpuidle: using governor menu
[ 0.148604] PCCT header not found.
[ 0.148604] ACPI: bus type PCI registered
[ 0.148604] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.148604] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.148604] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.148604] PCI: Using configuration type 1 for base access
[ 0.149513] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.149513] ACPI: Added _OSI(Module Device)
[ 0.149513] ACPI: Added _OSI(Processor Device)
[ 0.149513] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.149513] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.149513] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.153258] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.154794] ACPI: EC: EC started
[ 0.154795] ACPI: EC: interrupt blocked
[ 0.154899] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
[ 0.154902] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.154904] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions
[ 0.154905] ACPI: Interpreter enabled
[ 0.154932] ACPI: (supports S0 S3 S4 S5)
[ 0.154933] ACPI: Using IOAPIC for interrupt routing
[ 0.154966] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.171425] acpi ACPI0003:01: ACPI dock station (docks/bays count: 1)
[ 0.171903] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.171910] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.171985] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.172008] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.172083] acpi PNP0A08:00: ignoring host bridge window [mem 0x000c4000-0x000c7fff window] (conflicts with Video ROM [mem 0x000c0000-0x000c67ff])
[ 0.172390] PCI host bridge to bus 0000:00
[ 0.172393] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.172395] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.172397] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.172399] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.172401] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.172404] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.172406] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.172408] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.172410] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.172413] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.172415] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.172417] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.172419] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.172421] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.172423] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[ 0.172425] pci_bus 0000:00: root bus resource [mem 0x90000000-0xfebfffff window]
[ 0.172427] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[ 0.172430] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.172441] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
[ 0.172471] DMAR: Forcing write-buffer flush capability
[ 0.172472] DMAR: Disabling IOMMU for graphics on this chipset
[ 0.172601] pci 0000:00:02.0: [8086:2a42] type 00 class 0x030000
[ 0.172616] pci 0000:00:02.0: reg 0x10: [mem 0xe1400000-0xe17fffff 64bit]
[ 0.172624] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.172630] pci 0000:00:02.0: reg 0x20: [io 0x3400-0x3407]
[ 0.172768] pci 0000:00:02.1: [8086:2a43] type 00 class 0x038000
[ 0.172782] pci 0000:00:02.1: reg 0x10: [mem 0xe1800000-0xe18fffff 64bit]
[ 0.172966] pci 0000:00:19.0: [8086:10f5] type 00 class 0x020000
[ 0.172995] pci 0000:00:19.0: reg 0x10: [mem 0xe1a00000-0xe1a1ffff]
[ 0.173007] pci 0000:00:19.0: reg 0x14: [mem 0xe1a24000-0xe1a24fff]
[ 0.173019] pci 0000:00:19.0: reg 0x18: [io 0x3000-0x301f]
[ 0.173110] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.173231] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[ 0.173294] pci 0000:00:1a.0: reg 0x20: [io 0x3020-0x303f]
[ 0.173469] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[ 0.173532] pci 0000:00:1a.1: reg 0x20: [io 0x3040-0x305f]
[ 0.173706] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
[ 0.173769] pci 0000:00:1a.2: reg 0x20: [io 0x3060-0x307f]
[ 0.173951] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[ 0.173980] pci 0000:00:1a.7: reg 0x10: [mem 0xe1a26000-0xe1a263ff]
[ 0.174090] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.174225] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[ 0.174258] pci 0000:00:1b.0: reg 0x10: [mem 0xe1a20000-0xe1a23fff 64bit]
[ 0.174371] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.174509] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[ 0.174620] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.174759] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
[ 0.174870] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.175011] pci 0000:00:1c.2: [8086:2944] type 01 class 0x060400
[ 0.175132] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.175272] pci 0000:00:1c.3: [8086:2946] type 01 class 0x060400
[ 0.175391] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.175536] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[ 0.175599] pci 0000:00:1d.0: reg 0x20: [io 0x3080-0x309f]
[ 0.175774] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[ 0.175838] pci 0000:00:1d.1: reg 0x20: [io 0x30a0-0x30bf]
[ 0.176015] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[ 0.176078] pci 0000:00:1d.2: reg 0x20: [io 0x30c0-0x30df]
[ 0.176262] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[ 0.176291] pci 0000:00:1d.7: reg 0x10: [mem 0xe1a27000-0xe1a273ff]
[ 0.176401] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.176528] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.176717] pci 0000:00:1f.0: [8086:2917] type 00 class 0x060100
[ 0.176985] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601
[ 0.177014] pci 0000:00:1f.2: reg 0x10: [io 0x3408-0x340f]
[ 0.177026] pci 0000:00:1f.2: reg 0x14: [io 0x3418-0x341b]
[ 0.177038] pci 0000:00:1f.2: reg 0x18: [io 0x3410-0x3417]
[ 0.177049] pci 0000:00:1f.2: reg 0x1c: [io 0x341c-0x341f]
[ 0.177061] pci 0000:00:1f.2: reg 0x20: [io 0x30e0-0x30ff]
[ 0.177073] pci 0000:00:1f.2: reg 0x24: [mem 0xe1a25000-0xe1a257ff]
[ 0.177141] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.177270] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[ 0.177298] pci 0000:00:1f.3: reg 0x10: [mem 0xe1a28000-0xe1a280ff 64bit]
[ 0.177329] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.177535] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.177612] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.177723] pci 0000:03:00.0: [168c:0030] type 00 class 0x028000
[ 0.177790] pci 0000:03:00.0: reg 0x10: [mem 0xe1900000-0xe191ffff 64bit]
[ 0.177892] pci 0000:03:00.0: reg 0x30: [mem 0xe1920000-0xe192ffff pref]
[ 0.178046] pci 0000:03:00.0: supports D1
[ 0.178048] pci 0000:03:00.0: PME# supported from D0 D1 D3hot
[ 0.188035] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.188043] pci 0000:00:1c.2: bridge window [mem 0xe1900000-0xe19fffff]
[ 0.188156] acpiphp: Slot [1] registered
[ 0.188194] pci 0000:04:00.0: [1b21:1042] type 00 class 0x0c0330
[ 0.188252] pci 0000:04:00.0: reg 0x10: [mem 0xe0800000-0xe0807fff 64bit]
[ 0.188476] pci 0000:04:00.0: PME# supported from D3hot
[ 0.200027] pci 0000:00:1c.3: PCI bridge to [bus 04]
[ 0.200033] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.200038] pci 0000:00:1c.3: bridge window [mem 0xe0000000-0xe08fffff]
[ 0.200046] pci 0000:00:1c.3: bridge window [mem 0xe0c00000-0xe13fffff 64bit pref]
[ 0.200232] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
[ 0.200246] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.200248] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.200251] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.200253] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000c3fff window] (subtractive decode)
[ 0.200255] pci 0000:00:1e.0: bridge window [mem 0x000c8000-0x000cbfff window] (subtractive decode)
[ 0.200258] pci 0000:00:1e.0: bridge window [mem 0x000cc000-0x000cffff window] (subtractive decode)
[ 0.200260] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[ 0.200262] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[ 0.200265] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[ 0.200267] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[ 0.200269] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[ 0.200272] pci 0000:00:1e.0: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
[ 0.200274] pci 0000:00:1e.0: bridge window [mem 0x000e8000-0x000ebfff window] (subtractive decode)
[ 0.200276] pci 0000:00:1e.0: bridge window [mem 0x000ec000-0x000effff window] (subtractive decode)
[ 0.200279] pci 0000:00:1e.0: bridge window [mem 0x000f0000-0x000fffff window] (subtractive decode)
[ 0.200281] pci 0000:00:1e.0: bridge window [mem 0x90000000-0xfebfffff window] (subtractive decode)
[ 0.200283] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode)
[ 0.200498] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 12 14 15) *11
[ 0.200589] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.200677] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12 14 15) *11
[ 0.200764] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.200851] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.200938] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.201025] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.201112] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.202820] ACPI: Enabled 1 GPEs in block 00 to 3F
[ 0.202971] ACPI: EC: interrupt unblocked
[ 0.202981] ACPI: EC: event unblocked
[ 0.202990] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.202993] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
[ 0.203093] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.203093] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.203093] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.203093] vgaarb: loaded
[ 0.203093] EDAC MC: Ver: 3.0.0
[ 0.203093] PCI: Using ACPI for IRQ routing
[ 0.205915] PCI: pci_cache_line_size set to 64 bytes
[ 0.206012] e820: reserve RAM buffer [mem 0x7fb17000-0x7fffffff]
[ 0.206170] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.206170] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.206170] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.208022] clocksource: Switched to clocksource hpet
[ 0.226072] VFS: Disk quotas dquot_6.6.0
[ 0.226106] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.226240] pnp: PnP ACPI init
[ 0.226408] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.226411] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.226414] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.226416] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.226419] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.226422] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.226424] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.226427] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.226433] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.227124] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.227129] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.227210] system 00:02: [io 0x0800-0x080f] has been reserved
[ 0.227213] system 00:02: [io 0x0500-0x057f] has been reserved
[ 0.227215] system 00:02: [io 0x0580-0x05bf] has been reserved
[ 0.227219] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.227261] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.227321] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.227371] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.227536] pnp: PnP ACPI: found 6 devices
[ 0.235130] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.235190] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.235207] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.235222] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.235229] pci 0000:00:1c.2: bridge window [mem 0xe1900000-0xe19fffff]
[ 0.235240] pci 0000:00:1c.3: PCI bridge to [bus 04]
[ 0.235243] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.235250] pci 0000:00:1c.3: bridge window [mem 0xe0000000-0xe08fffff]
[ 0.235255] pci 0000:00:1c.3: bridge window [mem 0xe0c00000-0xe13fffff 64bit pref]
[ 0.235263] pci 0000:00:1e.0: PCI bridge to [bus 05]
[ 0.235279] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.235281] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.235283] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.235285] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.235287] pci_bus 0000:00: resource 8 [mem 0x000c8000-0x000cbfff window]
[ 0.235290] pci_bus 0000:00: resource 9 [mem 0x000cc000-0x000cffff window]
[ 0.235292] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window]
[ 0.235294] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window]
[ 0.235296] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window]
[ 0.235298] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window]
[ 0.235300] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window]
[ 0.235302] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window]
[ 0.235304] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window]
[ 0.235306] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window]
[ 0.235308] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff window]
[ 0.235311] pci_bus 0000:00: resource 19 [mem 0x90000000-0xfebfffff window]
[ 0.235313] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed44fff window]
[ 0.235316] pci_bus 0000:03: resource 1 [mem 0xe1900000-0xe19fffff]
[ 0.235318] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff]
[ 0.235320] pci_bus 0000:04: resource 1 [mem 0xe0000000-0xe08fffff]
[ 0.235322] pci_bus 0000:04: resource 2 [mem 0xe0c00000-0xe13fffff 64bit pref]
[ 0.235325] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7 window]
[ 0.235327] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff window]
[ 0.235329] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.235331] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.235334] pci_bus 0000:05: resource 8 [mem 0x000c8000-0x000cbfff window]
[ 0.235336] pci_bus 0000:05: resource 9 [mem 0x000cc000-0x000cffff window]
[ 0.235338] pci_bus 0000:05: resource 10 [mem 0x000d0000-0x000d3fff window]
[ 0.235340] pci_bus 0000:05: resource 11 [mem 0x000d4000-0x000d7fff window]
[ 0.235342] pci_bus 0000:05: resource 12 [mem 0x000d8000-0x000dbfff window]
[ 0.235344] pci_bus 0000:05: resource 13 [mem 0x000dc000-0x000dffff window]
[ 0.235347] pci_bus 0000:05: resource 14 [mem 0x000e0000-0x000e3fff window]
[ 0.235349] pci_bus 0000:05: resource 15 [mem 0x000e4000-0x000e7fff window]
[ 0.235351] pci_bus 0000:05: resource 16 [mem 0x000e8000-0x000ebfff window]
[ 0.235353] pci_bus 0000:05: resource 17 [mem 0x000ec000-0x000effff window]
[ 0.235355] pci_bus 0000:05: resource 18 [mem 0x000f0000-0x000fffff window]
[ 0.235357] pci_bus 0000:05: resource 19 [mem 0x90000000-0xfebfffff window]
[ 0.235359] pci_bus 0000:05: resource 20 [mem 0xfed40000-0xfed44fff window]
[ 0.235482] NET: Registered protocol family 2
[ 0.235751] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.236061] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.236532] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.236597] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.236663] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.236773] NET: Registered protocol family 1
[ 0.236793] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.239427] PCI: CLS 64 bytes, default 64
[ 0.239485] Unpacking initramfs...
[ 0.847092] Freeing initrd memory: 21068K
[ 0.847211] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.847215] software IO TLB [mem 0x7bb17000-0x7fb17000] (64MB) mapped at [ffff88487bb17000-ffff88487fb16fff]
[ 0.847754] audit: initializing netlink subsys (disabled)
[ 0.847854] audit: type=2000 audit(1507977027.847:1): state=initialized audit_enabled=0 res=1
[ 0.848396] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[ 0.848427] zbud: loaded
[ 1.523315] Key type asymmetric registered
[ 1.523317] Asymmetric key parser 'x509' registered
[ 1.523341] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 1.523387] io scheduler noop registered
[ 1.523388] io scheduler deadline registered
[ 1.523402] io scheduler cfq registered (default)
[ 1.523403] io scheduler mq-deadline registered
[ 1.524647] pcieport 0000:00:1c.0: Signaling PME with IRQ 24
[ 1.524679] pcieport 0000:00:1c.1: Signaling PME with IRQ 25
[ 1.524707] pcieport 0000:00:1c.2: Signaling PME with IRQ 26
[ 1.524737] pcieport 0000:00:1c.3: Signaling PME with IRQ 27
[ 1.524779] efifb: probing for efifb
[ 1.524796] efifb: framebuffer at 0xd0000000, using 5120k, total 5120k
[ 1.524798] efifb: mode is 1440x900x32, linelength=5760, pages=1
[ 1.524799] efifb: scrolling: redraw
[ 1.524801] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.529417] Console: switching to colour frame buffer device 180x56
[ 1.533850] fb0: EFI VGA frame buffer device
[ 1.533861] intel_idle: does not run on family 6 model 23
[ 1.542127] Monitor-Mwait will be used to enter C-1 state
[ 1.542134] Monitor-Mwait will be used to enter C-2 state
[ 1.542138] Monitor-Mwait will be used to enter C-3 state
[ 1.542141] tsc: Marking TSC unstable due to TSC halts in idle
[ 1.542463] GHES: HEST is not enabled!
[ 1.542587] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.543285] Linux agpgart interface v0.103
[ 1.543466] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 1.543467] AMD IOMMUv2 functionality not available on this system
[ 1.543740] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.554926] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.554933] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.555162] mousedev: PS/2 mouse device common for all mice
[ 1.555227] rtc_cmos 00:03: RTC can wake from S4
[ 1.555421] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.555452] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.555506] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.555758] NET: Registered protocol family 10
[ 1.556082] Segment Routing with IPv6
[ 1.556103] mip6: Mobile IPv6
[ 1.556105] NET: Registered protocol family 17
[ 1.556108] mpls_gso: MPLS GSO support
[ 1.556305] microcode: sig=0x10676, pf=0x80, revision=0x0
[ 1.556404] microcode: Microcode Update Driver: v2.2.
[ 1.556633] registered taskstats version 1
[ 1.556658] zswap: loaded using pool lzo/zbud
[ 1.556808] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[ 1.557280] rtc_cmos 00:03: setting system clock to 2017-10-14 10:30:28 UTC (1507977028)
[ 1.557316] PM: Hibernation image not present or could not be loaded.
[ 1.561110] Freeing unused kernel memory: 1472K
[ 1.561111] Write protecting the kernel read-only data: 12288k
[ 1.562008] Freeing unused kernel memory: 1592K
[ 1.566589] Freeing unused kernel memory: 1132K
[ 1.569030] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.570553] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.802198] ACPI: bus type USB registered
[ 1.802238] usbcore: registered new interface driver usbfs
[ 1.802253] usbcore: registered new interface driver hub
[ 1.804921] pps_core: LinuxPPS API ver. 1 registered
[ 1.804923] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 1.805229] PTP clock support registered
[ 1.807010] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 1.807011] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.807313] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 1.808981] usbcore: registered new device driver usb
[ 1.809738] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.810161] ehci-pci: EHCI PCI platform driver
[ 1.810661] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.811943] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 1.812503] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.812505] ACPI: Thermal Zone [THM0] (59 C)
[ 1.813994] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.813996] ACPI: Thermal Zone [THM1] (50 C)
[ 1.827447] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 1.827457] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 1
[ 1.834854] SCSI subsystem initialized
[ 1.837214] xhci_hcd 0000:04:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x00080000
[ 1.837444] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.837447] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.837449] usb usb1: Product: xHCI Host Controller
[ 1.837451] usb usb1: Manufacturer: Linux 4.13.0-1-amd64 xhci-hcd
[ 1.837453] usb usb1: SerialNumber: 0000:04:00.0
[ 1.837627] hub 1-0:1.0: USB hub found
[ 1.837643] hub 1-0:1.0: 2 ports detected
[ 1.837797] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 1.837804] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 2
[ 1.837834] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.837865] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.837867] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.837869] usb usb2: Product: xHCI Host Controller
[ 1.837872] usb usb2: Manufacturer: Linux 4.13.0-1-amd64 xhci-hcd
[ 1.837874] usb usb2: SerialNumber: 0000:04:00.0
[ 1.838014] hub 2-0:1.0: USB hub found
[ 1.838028] hub 2-0:1.0: 2 ports detected
[ 1.838310] libata version 3.00 loaded.
[ 1.852049] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x35d0915efad, max_idle_ns: 881590571060 ns
[ 2.018611] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:1f:16:18:ee:48
[ 2.018613] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 2.018643] e1000e 0000:00:19.0 eth0: MAC: 7, PHY: 8, PBA No: FFFFFF-0FF
[ 2.018867] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 2.018876] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 3
[ 2.018892] ehci-pci 0000:00:1a.7: debug port 1
[ 2.022814] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[ 2.022831] ehci-pci 0000:00:1a.7: irq 18, io mem 0xe1a26000
[ 2.036122] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 2.036179] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.036182] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.036184] usb usb3: Product: EHCI Host Controller
[ 2.036186] usb usb3: Manufacturer: Linux 4.13.0-1-amd64 ehci_hcd
[ 2.036188] usb usb3: SerialNumber: 0000:00:1a.7
[ 2.036407] hub 3-0:1.0: USB hub found
[ 2.036418] hub 3-0:1.0: 6 ports detected
[ 2.036818] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 2.036825] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 4
[ 2.036839] ehci-pci 0000:00:1d.7: debug port 1
[ 2.040755] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 2.040769] ehci-pci 0000:00:1d.7: irq 16, io mem 0xe1a27000
[ 2.056104] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.056175] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.056177] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.056180] usb usb4: Product: EHCI Host Controller
[ 2.056182] usb usb4: Manufacturer: Linux 4.13.0-1-amd64 ehci_hcd
[ 2.056184] usb usb4: SerialNumber: 0000:00:1d.7
[ 2.056398] hub 4-0:1.0: USB hub found
[ 2.056407] hub 4-0:1.0: 6 ports detected
[ 2.056937] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 2.056945] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 5
[ 2.056955] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 2.056978] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00003020
[ 2.057047] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.057049] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.057052] usb usb5: Product: UHCI Host Controller
[ 2.057054] usb usb5: Manufacturer: Linux 4.13.0-1-amd64 uhci_hcd
[ 2.057056] usb usb5: SerialNumber: 0000:00:1a.0
[ 2.057479] hub 5-0:1.0: USB hub found
[ 2.057490] hub 5-0:1.0: 2 ports detected
[ 2.057643] ahci 0000:00:1f.2: version 3.0
[ 2.057868] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 2.057896] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[ 2.057900] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ccc
[ 2.058711] scsi host0: ahci
[ 2.058854] scsi host1: ahci
[ 2.058990] scsi host2: ahci
[ 2.059121] scsi host3: ahci
[ 2.059192] ata1: SATA max UDMA/133 abar m2048@0xe1a25000 port 0xe1a25100 irq 32
[ 2.059195] ata2: SATA max UDMA/133 abar m2048@0xe1a25000 port 0xe1a25180 irq 32
[ 2.059196] ata3: DUMMY
[ 2.059198] ata4: DUMMY
[ 2.059400] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 2.060721] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 2.060729] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 6
[ 2.060738] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 2.060770] uhci_hcd 0000:00:1a.1: irq 17, io base 0x00003040
[ 2.060841] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.060844] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.060846] usb usb6: Product: UHCI Host Controller
[ 2.060848] usb usb6: Manufacturer: Linux 4.13.0-1-amd64 uhci_hcd
[ 2.060850] usb usb6: SerialNumber: 0000:00:1a.1
[ 2.061051] hub 6-0:1.0: USB hub found
[ 2.061060] hub 6-0:1.0: 2 ports detected
[ 2.061336] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 2.061343] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 7
[ 2.061352] uhci_hcd 0000:00:1a.2: detected 2 ports
[ 2.061375] uhci_hcd 0000:00:1a.2: irq 18, io base 0x00003060
[ 2.061438] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.061441] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.061443] usb usb7: Product: UHCI Host Controller
[ 2.061445] usb usb7: Manufacturer: Linux 4.13.0-1-amd64 uhci_hcd
[ 2.061447] usb usb7: SerialNumber: 0000:00:1a.2
[ 2.061623] hub 7-0:1.0: USB hub found
[ 2.061632] hub 7-0:1.0: 2 ports detected
[ 2.061899] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.061908] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 8
[ 2.061917] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 2.061940] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00003080
[ 2.062002] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.062004] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.062007] usb usb8: Product: UHCI Host Controller
[ 2.062009] usb usb8: Manufacturer: Linux 4.13.0-1-amd64 uhci_hcd
[ 2.062011] usb usb8: SerialNumber: 0000:00:1d.0
[ 2.062163] hub 8-0:1.0: USB hub found
[ 2.062172] hub 8-0:1.0: 2 ports detected
[ 2.062442] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.062449] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 9
[ 2.062459] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 2.062482] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000030a0
[ 2.062544] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.062547] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.062549] usb usb9: Product: UHCI Host Controller
[ 2.062551] usb usb9: Manufacturer: Linux 4.13.0-1-amd64 uhci_hcd
[ 2.062553] usb usb9: SerialNumber: 0000:00:1d.1
[ 2.062731] hub 9-0:1.0: USB hub found
[ 2.062740] hub 9-0:1.0: 2 ports detected
[ 2.063005] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.063012] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 10
[ 2.063021] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 2.063044] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000030c0
[ 2.063106] usb usb10: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.063109] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.063111] usb usb10: Product: UHCI Host Controller
[ 2.063113] usb usb10: Manufacturer: Linux 4.13.0-1-amd64 uhci_hcd
[ 2.063115] usb usb10: SerialNumber: 0000:00:1d.2
[ 2.063285] hub 10-0:1.0: USB hub found
[ 2.063293] hub 10-0:1.0: 2 ports detected
[ 2.376468] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.378803] ata1.00: NCQ Send/Recv Log not supported
[ 2.378806] ata1.00: ATA-9: SAMSUNG MZMTE512HMHP-000MV, EXT42M0Q, max UDMA/133
[ 2.378808] ata1.00: 1000215216 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.379484] ata1.00: NCQ Send/Recv Log not supported
[ 2.379555] ata1.00: configured for UDMA/133
[ 2.379768] scsi 0:0:0:0: Direct-Access ATA SAMSUNG MZMTE512 2M0Q PQ: 0 ANSI: 5
[ 2.384113] usb 4-4: new high-speed USB device number 2 using ehci-pci
[ 2.536247] usb 4-4: config 1 has an invalid interface number: 12 but max is 4
[ 2.536249] usb 4-4: config 1 has an invalid interface number: 13 but max is 4
[ 2.536251] usb 4-4: config 1 has an invalid interface number: 13 but max is 4
[ 2.536253] usb 4-4: config 1 has no interface number 1
[ 2.536255] usb 4-4: config 1 has no interface number 4
[ 2.537247] usb 4-4: New USB device found, idVendor=1199, idProduct=9071
[ 2.537249] usb 4-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.537251] usb 4-4: Product: Sierra Wireless MC7430 Qualcomm® Snapdragon™ X7 LTE-A
[ 2.537253] usb 4-4: Manufacturer: Sierra Wireless, Incorporated
[ 2.537255] usb 4-4: SerialNumber: LU55030047011009
[ 2.560077] usb 6-2: new full-speed USB device number 2 using uhci_hcd
[ 2.686608] psmouse serio1: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 2.704370] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input2
[ 2.736288] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.740370] ata2.00: ATAPI: HL-DT-ST DVDRW GS22N, CP06, max UDMA/133
[ 2.743170] usb 6-2: New USB device found, idVendor=0a5c, idProduct=21e6
[ 2.743172] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.743175] usb 6-2: Product: BCM20702A0
[ 2.743177] usb 6-2: Manufacturer: Broadcom Corp
[ 2.743179] usb 6-2: SerialNumber: 2CD05A7FAEEC
[ 2.745205] ata2.00: configured for UDMA/133
[ 2.750646] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRW GS22N CP06 PQ: 0 ANSI: 5
[ 2.764447] sd 0:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/477 GiB)
[ 2.764466] sd 0:0:0:0: [sda] Write Protect is off
[ 2.764469] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.764500] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.768019] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10
[ 2.769111] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.779141] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda caddy
[ 2.779144] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.779345] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 3.012020] raid6: sse2x1 gen() 2578 MB/s
[ 3.080020] raid6: sse2x1 xor() 2695 MB/s
[ 3.148021] raid6: sse2x2 gen() 3495 MB/s
[ 3.216019] raid6: sse2x2 xor() 3337 MB/s
[ 3.260044] usb 3-5: new high-speed USB device number 3 using ehci-pci
[ 3.284011] raid6: sse2x4 gen() 4667 MB/s
[ 3.352010] raid6: sse2x4 xor() 3758 MB/s
[ 3.352012] raid6: using algorithm sse2x4 gen() 4667 MB/s
[ 3.352013] raid6: .... xor() 3758 MB/s, rmw enabled
[ 3.352014] raid6: using ssse3x2 recovery algorithm
[ 3.352353] xor: measuring software checksum speed
[ 3.392033] prefetch64-sse: 6538.000 MB/sec
[ 3.432032] generic_sse: 5755.000 MB/sec
[ 3.432033] xor: using function: prefetch64-sse (6538.000 MB/sec)
[ 3.432351] async_tx: api initialized (async)
[ 3.460562] usb 3-5: New USB device found, idVendor=17ef, idProduct=1005
[ 3.460565] usb 3-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.460930] hub 3-5:1.0: USB hub found
[ 3.461006] hub 3-5:1.0: 4 ports detected
[ 3.494434] Btrfs loaded, crc32c=crc32c-generic
[ 3.750781] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 3.879609] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 3.887220] systemd[1]: systemd 234 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
[ 3.887391] systemd[1]: Detected architecture x86-64.
[ 3.887585] systemd[1]: Set hostname to <universi-if9ee1>.
[ 4.053875] systemd[1]: Reached target Libvirt guests shutdown.
[ 4.053977] systemd[1]: Reached target System Time Synchronized.
[ 4.054003] systemd[1]: Reached target User and Group Name Lookups.
[ 4.054113] systemd[1]: Listening on Journal Audit Socket.
[ 4.054206] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 4.054272] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 4.054340] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 4.093347] RPC: Registered named UNIX socket transport module.
[ 4.093349] RPC: Registered udp transport module.
[ 4.093350] RPC: Registered tcp transport module.
[ 4.093351] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 4.105428] lp: driver loaded but no devices found
[ 4.113576] EXT4-fs (sda4): re-mounted. Opts: discard,user_xattr,errors=remount-ro
[ 4.126396] ppdev: user-space parallel port driver
[ 4.180750] drbd: initialized. Version: 8.4.7 (api:1/proto:86-101)
[ 4.180753] drbd: srcversion: 2DCC561E7F1E3D63526E90D
[ 4.180755] drbd: registered as block device major 147
[ 4.471668] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2a/PNP0C09:00/PNP0C0E:00/input/input3
[ 4.471696] ACPI: Sleep Button [SLPB]
[ 4.471928] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2a/PNP0C09:00/PNP0C0D:00/input/input4
[ 4.472078] ACPI: Lid Switch [LID]
[ 4.472146] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 4.472159] ACPI: Power Button [PWRF]
[ 4.474588] ACPI: AC Adapter [AC] (on-line)
[ 4.474604] ACPI Exception: AE_NOT_FOUND, Error reading AC Adapter state (20170531/ac-139)
[ 4.509782] Non-volatile memory driver v1.3
[ 4.512436] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[ 4.512437] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 4.512438] thinkpad_acpi: ThinkPad BIOS CBET4000 4.6-1757-gfe5030eceb, EC 7XHT25WW-3.6
[ 4.512439] thinkpad_acpi: Lenovo ThinkPad X200s, model 7470AE7
[ 4.512630] thinkpad_hwmon thinkpad_hwmon: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 4.513249] thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode
[ 4.513332] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 4.513333] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 4.516670] ACPI: Battery Slot [BAT0] (battery present)
[ 4.516823] ACPI: Battery Slot [BAT1] (battery absent)
[ 4.521285] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 4.521369] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 4.524857] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input6
[ 4.537644] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 4.604450] snd_hda_codec_conexant hdaudioC0D0: CX20561 (Hermosa): BIOS auto-probing.
[ 4.605014] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20561 (Hermosa): line_outs=1 (0x1a/0x0/0x0/0x0/0x0) type:speaker
[ 4.605017] snd_hda_codec_conexant hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 4.605019] snd_hda_codec_conexant hdaudioC0D0: hp_outs=2 (0x19/0x16/0x0/0x0/0x0)
[ 4.605021] snd_hda_codec_conexant hdaudioC0D0: mono: mono_out=0x0
[ 4.605023] snd_hda_codec_conexant hdaudioC0D0: dig-out=0x1c/0x0
[ 4.605024] snd_hda_codec_conexant hdaudioC0D0: inputs:
[ 4.605027] snd_hda_codec_conexant hdaudioC0D0: Mic=0x18
[ 4.605029] snd_hda_codec_conexant hdaudioC0D0: Internal Mic=0x1d
[ 4.605031] snd_hda_codec_conexant hdaudioC0D0: Dock Mic=0x17
[ 4.606122] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication
[ 4.617537] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 4.617861] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 4.617902] input: HDA Intel Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 4.617941] input: HDA Intel Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 4.617980] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 4.626722] pci 0000:00:00.0: Intel GM45 Chipset
[ 4.626747] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 4.628575] pci 0000:00:00.0: detected 262144K stolen memory
[ 4.628615] [drm] Memory usable by graphics device = 2048M
[ 4.628620] checking generic (d0000000 500000) vs hw (d0000000 10000000)
[ 4.628621] fb: switching to inteldrmfb from EFI VGA
[ 4.628680] Console: switching to colour dummy device 80x25
[ 4.632125] [drm] Replacing VGA console driver
[ 4.636141] ath: phy0: ASPM enabled: 0x43
[ 4.636143] ath: EEPROM regdomain: 0x6a
[ 4.636144] ath: EEPROM indicates we should expect a direct regpair map
[ 4.636147] ath: Country alpha2 being used: 00
[ 4.636148] ath: Regpair used: 0x6a
[ 4.644872] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 4.645398] ieee80211 phy0: Atheros AR9300 Rev:3 mem=0xffffae04c1280000, irq=18
[ 4.692338] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 4.692339] [drm] Driver supports precise vblank timestamp query.
[ 4.692617] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 4.884058] [drm] RC6 disabled, disabling runtime PM support
[ 4.884550] [drm] Initialized i915 1.6.0 20170619 for 0000:00:02.0 on minor 0
[ 4.884751] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 4.886353] acpi device:04: registered as cooling_device2
[ 4.886429] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input12
[ 4.886571] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20170531/utaddress-247)
[ 4.886578] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.886581] ACPI Warning: SystemIO range 0x00000000000005B0-0x00000000000005BF conflicts with OpRegion 0x0000000000000580-0x00000000000005BB (\GPIO) (20170531/utaddress-247)
[ 4.886585] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.886586] ACPI Warning: SystemIO range 0x0000000000000580-0x00000000000005AF conflicts with OpRegion 0x0000000000000580-0x00000000000005BB (\GPIO) (20170531/utaddress-247)
[ 4.886590] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.886592] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 4.954249] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.954293] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 5.111722] EXT4-fs (sda3): mounting ext2 file system using the ext4 subsystem
[ 5.118405] EXT4-fs (sda3): mounted filesystem without journal. Opts: discard,user_xattr
[ 5.158236] EXT4-fs (sda10): mounted filesystem with ordered data mode. Opts: discard,user_xattr
[ 5.190859] FAT-fs (sda2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 5.207057] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: discard,user_xattr
[ 5.218300] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: discard,user_xattr
[ 5.266014] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: discard,user_xattr
[ 5.266606] input: PC Speaker as /devices/platform/pcspkr/input/input13
[ 5.302940] systemd-journald[255]: Received request to flush runtime journal from PID 1
[ 5.311110] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: discard,user_xattr
[ 5.319510] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: discard,user_xattr
[ 5.325355] intel_powerclamp: No package C-state available
[ 5.551835] iTCO_vendor_support: vendor-support=0
[ 5.553283] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 5.553347] iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x0560)
[ 5.554709] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 5.658002] random: crng init done
[ 5.837091] usbcore: registered new interface driver usbserial
[ 5.837108] usbcore: registered new interface driver usbserial_generic
[ 5.837120] usbserial: USB Serial support registered for generic
[ 5.842649] usbcore: registered new interface driver qcserial
[ 5.842664] usbserial: USB Serial support registered for Qualcomm USB modem
[ 5.844434] qcserial 4-4:1.0: Qualcomm USB modem converter detected
[ 5.844529] usb 4-4: Qualcomm USB modem converter now attached to ttyUSB0
[ 5.844838] qcserial 4-4:1.2: Qualcomm USB modem converter detected
[ 5.844917] usb 4-4: Qualcomm USB modem converter now attached to ttyUSB1
[ 5.845196] qcserial 4-4:1.3: Qualcomm USB modem converter detected
[ 5.845455] usb 4-4: Qualcomm USB modem converter now attached to ttyUSB2
[ 5.850145] usbcore: registered new interface driver cdc_ncm
[ 5.852952] usbcore: registered new interface driver cdc_wdm
[ 5.877407] cdc_mbim 4-4:1.12: cdc-wdm0: USB WDM device
[ 5.877632] cdc_mbim 4-4:1.12 wwan0: register 'cdc_mbim' at usb-0000:00:1d.7-4, CDC MBIM, 7e:38:1d:93:37:6c
[ 5.877665] usbcore: registered new interface driver cdc_mbim
[ 5.880276] cdc_mbim 4-4:1.12 wwp0s29f7u4i12: renamed from wwan0
[ 6.073632] Bluetooth: Core ver 2.22
[ 6.074125] NET: Registered protocol family 31
[ 6.074126] Bluetooth: HCI device and connection manager initialized
[ 6.074130] Bluetooth: HCI socket layer initialized
[ 6.074134] Bluetooth: L2CAP socket layer initialized
[ 6.074142] Bluetooth: SCO socket layer initialized
[ 6.077889] usbcore: registered new interface driver btusb
[ 6.109013] nfc: nfc_init: NFC Core ver 0.1
[ 6.109527] NET: Registered protocol family 39
[ 6.200134] Bluetooth: hci0: BCM: chip id 63
[ 6.202190] Bluetooth: hci0: BCM: features 0x07
[ 6.234147] Bluetooth: hci0: universi-if9ee1
[ 6.236424] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000
[ 6.237399] bluetooth hci0: firmware: failed to load brcm/BCM20702A1-0a5c-21e6.hcd (-2)
[ 6.237407] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-21e6.hcd failed with error -2
[ 6.237410] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-21e6.hcd not found
[ 6.314017] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 6.314020] Bluetooth: BNEP filters: protocol multicast
[ 6.314035] Bluetooth: BNEP socket layer initialized
[ 6.566150] fbcon: inteldrmfb (fb0) is primary device
[ 7.097095] Console: switching to colour frame buffer device 180x56
[ 7.120971] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 7.682563] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 7.739183] Ebtables v2.0 registered
[ 15.200358] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 15.408315] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 15.422637] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 15.431765] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 15.445686] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 16.333528] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 17.592882] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 17.593023] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 21.470798] thinkpad_ec: loading out-of-tree module taints kernel.
[ 21.471305] thinkpad_ec: thinkpad_ec 0.42 loaded.
[ 21.471936] tp_smapi 0.42 loading...
[ 21.471943] SMAPI not supported (ID=0x67)
[ 21.471947] tp_smapi init failed (ret=-6)!
[ 21.633118] tp_smapi 0.42 loading...
[ 21.633126] SMAPI not supported (ID=0x67)
[ 21.633130] tp_smapi init failed (ret=-6)!
[ 23.685618] Bluetooth: RFCOMM TTY layer initialized
[ 23.685626] Bluetooth: RFCOMM socket layer initialized
[ 23.685632] Bluetooth: RFCOMM ver 1.11
[ 361.031032] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 676.036614] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 991.044709] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1306.060493] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1621.024646] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1936.024429] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 2251.052577] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 2566.033963] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 2881.044504] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 3196.067848] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready