| [ 0.000000] Linux version 5.4.44-rt26 (stefan@nobby) (gcc version 9.3.0 (Gentoo Hardened 9.3.0 p2)) #1 SMP PREEMPT Sat Jun 6 01:17:38 CEST 2020 |
| [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-5.4.44-rt26 root=/dev/mapper/vg_main-gentoo ro quiet dolvm crypt_root=/dev/sda2 root_trim=yes acpi_backlight=video thinkpad-acpi.fan_control=1 ath9k.blink=1 ath9k.nohwcrypt=1 panic=5 dock.immediate_undock=0 |
| [ 0.000000] x86/fpu: x87 FPU will use FXSAVE |
| [ 0.000000] BIOS-provided physical RAM map: |
| [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf73afff] usable |
| [ 0.000000] BIOS-e820: [mem 0x00000000bf73b000-0x00000000bfffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000c1c00000-0x00000000c3ffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000d0000000-0x00000000efffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fedfffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001fbffffff] usable |
| [ 0.000000] BIOS-e820: [mem 0x00000001fc000000-0x00000001ffffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000200000000-0x0000000237ffffff] usable |
| [ 0.000000] NX (Execute Disable) protection: active |
| [ 0.000000] SMBIOS 2.8 present. |
| [ 0.000000] DMI: LENOVO 3626F7U/3626F7U, BIOS CBET4000 4.12-284-g165efa1b86 05/26/2020 |
| [ 0.000000] tsc: Fast TSC calibration using PIT |
| [ 0.000000] tsc: Detected 2527.088 MHz processor |
| [ 0.001171] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| [ 0.001172] e820: remove [mem 0x000a0000-0x000fffff] usable |
| [ 0.001176] last_pfn = 0x238000 max_arch_pfn = 0x400000000 |
| [ 0.001178] MTRR default type: write-back |
| [ 0.001179] MTRR fixed ranges enabled: |
| [ 0.001179] 00000-9FFFF write-back |
| [ 0.001180] A0000-BFFFF uncachable |
| [ 0.001181] C0000-FFFFF write-back |
| [ 0.001181] MTRR variable ranges enabled: |
| [ 0.001182] 0 base 0BF800000 mask FFF800000 uncachable |
| [ 0.001183] 1 base 0C0000000 mask FF0000000 uncachable |
| [ 0.001184] 2 base 0D0000000 mask FF0000000 write-combining |
| [ 0.001185] 3 base 0E0000000 mask FE0000000 uncachable |
| [ 0.001185] 4 disabled |
| [ 0.001186] 5 disabled |
| [ 0.001186] 6 disabled |
| [ 0.001186] 7 disabled |
| [ 0.001666] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT |
| [ 0.002017] last_pfn = 0xbf73b max_arch_pfn = 0x400000000 |
| [ 0.002036] BRK [0x02801000, 0x02801fff] PGTABLE |
| [ 0.002039] BRK [0x02802000, 0x02802fff] PGTABLE |
| [ 0.002041] BRK [0x02803000, 0x02803fff] PGTABLE |
| [ 0.002083] BRK [0x02804000, 0x02804fff] PGTABLE |
| [ 0.002301] BRK [0x02805000, 0x02805fff] PGTABLE |
| [ 0.002310] BRK [0x02806000, 0x02806fff] PGTABLE |
| [ 0.002364] RAMDISK: [mem 0x37944000-0x37c99fff] |
| [ 0.002371] ACPI: Early table checksum verification disabled |
| [ 0.002377] ACPI: RSDP 0x00000000000F6750 000024 (v02 COREv4) |
| [ 0.002381] ACPI: XSDT 0x00000000BF74F0E0 000054 (v01 COREv4 COREBOOT 00000000 CORE 20200110) |
| [ 0.002387] ACPI: FACP 0x00000000BF752D80 000114 (v06 COREv4 COREBOOT 00000000 CORE 20200110) |
| [ 0.002393] ACPI: DSDT 0x00000000BF74F280 003AF9 (v02 COREv4 COREBOOT 20130325 INTL 20200110) |
| [ 0.002396] ACPI: FACS 0x00000000BF74F240 000040 |
| [ 0.002398] ACPI: FACS 0x00000000BF74F240 000040 |
| [ 0.002401] ACPI: SSDT 0x00000000BF752EA0 00153D (v02 COREv4 COREBOOT 0000002A CORE 20200110) |
| [ 0.002404] ACPI: MCFG 0x00000000BF7543E0 00003C (v01 COREv4 COREBOOT 00000000 CORE 20200110) |
| [ 0.002407] ACPI: TCPA 0x00000000BF754420 000032 (v02 COREv4 COREBOOT 00000000 CORE 20200110) |
| [ 0.002409] ACPI: APIC 0x00000000BF754460 000084 (v03 COREv4 COREBOOT 00000000 CORE 20200110) |
| [ 0.002412] ACPI: HPET 0x00000000BF7564F0 000038 (v01 COREv4 COREBOOT 00000000 CORE 20200110) |
| [ 0.002420] ACPI: Local APIC address 0xfee00000 |
| [ 0.002442] Zone ranges: |
| [ 0.002443] DMA [mem 0x0000000000001000-0x0000000000ffffff] |
| [ 0.002444] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] |
| [ 0.002445] Normal [mem 0x0000000100000000-0x0000000237ffffff] |
| [ 0.002445] Movable zone start for each node |
| [ 0.002446] Early memory node ranges |
| [ 0.002446] node 0: [mem 0x0000000000001000-0x000000000009efff] |
| [ 0.002447] node 0: [mem 0x0000000000100000-0x00000000bf73afff] |
| [ 0.002448] node 0: [mem 0x0000000100000000-0x00000001fbffffff] |
| [ 0.002449] node 0: [mem 0x0000000200000000-0x0000000237ffffff] |
| [ 0.002663] Zeroed struct page in unavailable ranges: 18727 pages |
| [ 0.002663] Initmem setup node 0 [mem 0x0000000000001000-0x0000000237ffffff] |
| [ 0.002665] On node 0 totalpages: 2045657 |
| [ 0.002666] DMA zone: 64 pages used for memmap |
| [ 0.002667] DMA zone: 21 pages reserved |
| [ 0.002667] DMA zone: 3998 pages, LIFO batch:0 |
| [ 0.002722] DMA32 zone: 12189 pages used for memmap |
| [ 0.002723] DMA32 zone: 780091 pages, LIFO batch:63 |
| [ 0.015311] Normal zone: 19968 pages used for memmap |
| [ 0.015316] Normal zone: 1261568 pages, LIFO batch:63 |
| [ 0.032463] Reserving Intel graphics memory at [mem 0xc2000000-0xc3ffffff] |
| [ 0.032607] ACPI: PM-Timer IO Port: 0x508 |
| [ 0.032609] ACPI: Local APIC address 0xfee00000 |
| [ 0.032615] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) |
| [ 0.032617] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) |
| [ 0.032617] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) |
| [ 0.032618] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) |
| [ 0.032629] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 |
| [ 0.032632] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) |
| [ 0.032633] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) |
| [ 0.032635] ACPI: IRQ0 used by override. |
| [ 0.032636] ACPI: IRQ9 used by override. |
| [ 0.032638] Using ACPI (MADT) for SMP configuration information |
| [ 0.032639] ACPI: HPET id: 0x8086a701 base: 0xfed00000 |
| [ 0.032645] smpboot: Allowing 4 CPUs, 0 hotplug CPUs |
| [ 0.032659] [mem 0xf0000000-0xfecfffff] available for PCI devices |
| [ 0.032662] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns |
| [ 0.181533] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 |
| [ 0.181907] percpu: Embedded 38 pages/cpu s116824 r8192 d30632 u524288 |
| [ 0.181916] pcpu-alloc: s116824 r8192 d30632 u524288 alloc=1*2097152 |
| [ 0.181918] pcpu-alloc: [0] 0 1 2 3 |
| [ 0.181937] Built 1 zonelists, mobility grouping on. Total pages: 2013415 |
| [ 0.181939] Kernel command line: BOOT_IMAGE=/vmlinuz-5.4.44-rt26 root=/dev/mapper/vg_main-gentoo ro quiet dolvm crypt_root=/dev/sda2 root_trim=yes acpi_backlight=video thinkpad-acpi.fan_control=1 ath9k.blink=1 ath9k.nohwcrypt=1 panic=5 dock.immediate_undock=0 |
| [ 0.183375] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) |
| [ 0.185606] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) |
| [ 0.185659] mem auto-init: stack:off, heap alloc:off, heap free:off |
| [ 0.227039] Memory: 7946612K/8182628K available (12291K kernel code, 541K rwdata, 2848K rodata, 904K init, 1136K bss, 236016K reserved, 0K cma-reserved) |
| [ 0.227104] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 |
| [ 0.227114] Kernel/User page tables isolation: enabled |
| [ 0.227170] rcu: Preemptible hierarchical RCU implementation. |
| [ 0.227172] Tasks RCU enabled. |
| [ 0.227173] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. |
| [ 0.227183] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 |
| [ 0.227529] random: get_random_bytes called from start_kernel+0x2fc/0x49c with crng_init=0 |
| [ 0.229867] Console: colour VGA+ 80x25 |
| [ 0.229869] printk: console [tty0] enabled |
| [ 0.229874] ACPI: Core revision 20190816 |
| [ 0.229949] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns |
| [ 0.229967] APIC: Switch to symmetric I/O mode setup |
| [ 0.230480] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 |
| [ 0.234966] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x246d2eef045, max_idle_ns: 440795298906 ns |
| [ 0.234973] Calibrating delay loop (skipped), value calculated using timer frequency.. 5054.17 BogoMIPS (lpj=2527088) |
| [ 0.234974] pid_max: default: 32768 minimum: 301 |
| [ 0.235023] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) |
| [ 0.235049] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) |
| [ 0.235250] mce: CPU0: Thermal monitoring enabled (TM1) |
| [ 0.235260] process: using mwait in idle threads |
| [ 0.235264] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7 |
| [ 0.235265] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 |
| [ 0.235268] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization |
| [ 0.235270] Spectre V2 : Mitigation: Full generic retpoline |
| [ 0.235271] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch |
| [ 0.235272] Spectre V2 : Enabling Restricted Speculation for firmware calls |
| [ 0.235273] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier |
| [ 0.235274] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl |
| [ 0.235276] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp |
| [ 0.235278] MDS: Vulnerable: Clear CPU buffers attempted, no microcode |
| [ 0.235434] Freeing SMP alternatives memory: 32K |
| [ 0.337633] smpboot: CPU0: Intel(R) Core(TM) i5 CPU M 540 @ 2.53GHz (family: 0x6, model: 0x25, stepping: 0x2) |
| [ 0.342975] Performance Events: PEBS fmt1+, Westmere events, 16-deep LBR, Intel PMU driver. |
| [ 0.342982] core: CPUID marked event: 'bus cycles' unavailable |
| [ 0.342983] ... version: 3 |
| [ 0.342984] ... bit width: 48 |
| [ 0.342984] ... generic registers: 4 |
| [ 0.342985] ... value mask: 0000ffffffffffff |
| [ 0.342986] ... max period: 000000007fffffff |
| [ 0.342986] ... fixed-purpose events: 3 |
| [ 0.342987] ... event mask: 000000070000000f |
| [ 0.344970] rcu: Hierarchical SRCU implementation. |
| [ 0.348970] smp: Bringing up secondary CPUs ... |
| [ 0.356977] x86: Booting SMP configuration: |
| [ 0.356979] .... node #0, CPUs: #1 |
| [ 0.358034] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. |
| [ 0.365984] #2 #3 |
| [ 0.375995] smp: Brought up 1 node, 4 CPUs |
| [ 0.375996] smpboot: Max logical packages: 1 |
| [ 0.375997] smpboot: Total of 4 processors activated (20216.70 BogoMIPS) |
| [ 0.378235] devtmpfs: initialized |
| [ 0.378235] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns |
| [ 0.378235] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) |
| [ 0.378235] NET: Registered protocol family 16 |
| [ 0.379214] cpuidle: using governor menu |
| [ 0.379214] ACPI: bus type PCI registered |
| [ 0.379214] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) |
| [ 0.379214] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 |
| [ 0.379214] PCI: Using configuration type 1 for base access |
| [ 0.383029] cryptd: max_cpu_qlen set to 1000 |
| [ 0.384042] ACPI: Added _OSI(Module Device) |
| [ 0.384044] ACPI: Added _OSI(Processor Device) |
| [ 0.384045] ACPI: Added _OSI(3.0 _SCP Extensions) |
| [ 0.384046] ACPI: Added _OSI(Processor Aggregator Device) |
| [ 0.384048] ACPI: Added _OSI(Linux-Dell-Video) |
| [ 0.384049] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) |
| [ 0.384050] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) |
| [ 0.386789] ACPI: 2 ACPI AML tables successfully acquired and loaded |
| [ 0.387988] ACPI: EC: EC started |
| [ 0.387990] ACPI: EC: interrupt blocked |
| [ 0.388573] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC |
| [ 0.388575] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62 |
| [ 0.388577] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC used to handle transactions |
| [ 0.388578] ACPI: Interpreter enabled |
| [ 0.388595] ACPI: (supports S0 S3 S5) |
| [ 0.388596] ACPI: Using IOAPIC for interrupt routing |
| [ 0.388621] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| [ 0.393460] acpi ACPI0003:01: ACPI dock station (docks/bays count: 1) |
| [ 0.393619] ACPI: Power Resource [FPWR] (off) |
| [ 0.393970] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) |
| [ 0.393970] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] |
| [ 0.393976] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability LTR] |
| [ 0.394030] acpi PNP0A08:00: ignoring host bridge window [mem 0x000c4000-0x000c7fff window] (conflicts with Video ROM [mem 0x000c0000-0x000c6dff]) |
| [ 0.394061] PCI host bridge to bus 0000:00 |
| [ 0.394064] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] |
| [ 0.394065] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] |
| [ 0.394067] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] |
| [ 0.394068] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] |
| [ 0.394070] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] |
| [ 0.394072] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window] |
| [ 0.394073] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] |
| [ 0.394075] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] |
| [ 0.394076] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] |
| [ 0.394077] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] |
| [ 0.394078] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] |
| [ 0.394079] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] |
| [ 0.394080] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window] |
| [ 0.394082] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window] |
| [ 0.394083] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window] |
| [ 0.394084] pci_bus 0000:00: root bus resource [mem 0xc4000000-0xfebfffff window] |
| [ 0.394085] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] |
| [ 0.394087] pci_bus 0000:00: root bus resource [bus 00-ff] |
| [ 0.394097] pci 0000:00:00.0: [8086:0044] type 00 class 0x060000 |
| [ 0.394206] pci 0000:00:02.0: [8086:0046] type 00 class 0x030000 |
| [ 0.394217] pci 0000:00:02.0: reg 0x10: [mem 0xcf800000-0xcfbfffff 64bit] |
| [ 0.394223] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref] |
| [ 0.394227] pci 0000:00:02.0: reg 0x20: [io 0x1840-0x1847] |
| [ 0.394338] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000 |
| [ 0.394368] pci 0000:00:16.0: reg 0x10: [mem 0xcfd2a000-0xcfd2a00f 64bit] |
| [ 0.394457] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold |
| [ 0.394533] pci 0000:00:19.0: [8086:10ea] type 00 class 0x020000 |
| [ 0.394553] pci 0000:00:19.0: reg 0x10: [mem 0xcfd00000-0xcfd1ffff] |
| [ 0.394561] pci 0000:00:19.0: reg 0x14: [mem 0xcfd24000-0xcfd24fff] |
| [ 0.394568] pci 0000:00:19.0: reg 0x18: [io 0x1800-0x181f] |
| [ 0.394626] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold |
| [ 0.394691] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320 |
| [ 0.394713] pci 0000:00:1a.0: reg 0x10: [mem 0xcfd27000-0xcfd273ff] |
| [ 0.394792] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold |
| [ 0.394980] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300 |
| [ 0.394980] pci 0000:00:1b.0: reg 0x10: [mem 0xcfd20000-0xcfd23fff 64bit] |
| [ 0.394980] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold |
| [ 0.395050] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400 |
| [ 0.395125] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold |
| [ 0.395210] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400 |
| [ 0.395281] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold |
| [ 0.395368] pci 0000:00:1c.3: [8086:3b48] type 01 class 0x060400 |
| [ 0.395439] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold |
| [ 0.395523] pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400 |
| [ 0.395600] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold |
| [ 0.395689] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320 |
| [ 0.395710] pci 0000:00:1d.0: reg 0x10: [mem 0xcfd28000-0xcfd283ff] |
| [ 0.395787] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold |
| [ 0.395981] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401 |
| [ 0.395981] pci 0000:00:1f.0: [8086:3b07] type 00 class 0x060100 |
| [ 0.396161] pci 0000:00:1f.2: [8086:3b2f] type 00 class 0x010601 |
| [ 0.396185] pci 0000:00:1f.2: reg 0x10: [io 0x1848-0x184f] |
| [ 0.396194] pci 0000:00:1f.2: reg 0x14: [io 0x1858-0x185b] |
| [ 0.396203] pci 0000:00:1f.2: reg 0x18: [io 0x1850-0x1857] |
| [ 0.396212] pci 0000:00:1f.2: reg 0x1c: [io 0x185c-0x185f] |
| [ 0.396220] pci 0000:00:1f.2: reg 0x20: [io 0x1820-0x183f] |
| [ 0.396229] pci 0000:00:1f.2: reg 0x24: [mem 0xcfd26000-0xcfd267ff] |
| [ 0.396282] pci 0000:00:1f.2: PME# supported from D3hot |
| [ 0.396363] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500 |
| [ 0.396380] pci 0000:00:1f.3: reg 0x10: [mem 0xcfd29000-0xcfd290ff 64bit] |
| [ 0.396399] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f] |
| [ 0.396491] pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000 |
| [ 0.396514] pci 0000:00:1f.6: reg 0x10: [mem 0xcfd25000-0xcfd25fff 64bit] |
| [ 0.396665] pci 0000:00:1c.0: PCI bridge to [bus 01] |
| [ 0.396708] pci 0000:00:1c.1: PCI bridge to [bus 02] |
| [ 0.396750] pci 0000:00:1c.3: PCI bridge to [bus 03] |
| [ 0.396974] pci 0000:04:00.0: [168c:002a] type 00 class 0x028000 |
| [ 0.396974] pci 0000:04:00.0: reg 0x10: [mem 0xcfc00000-0xcfc0ffff 64bit] |
| [ 0.396974] pci 0000:04:00.0: supports D1 |
| [ 0.396974] pci 0000:04:00.0: PME# supported from D0 D1 D3hot |
| [ 0.397032] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' |
| [ 0.397041] pci 0000:00:1c.4: PCI bridge to [bus 04] |
| [ 0.397046] pci 0000:00:1c.4: bridge window [mem 0xcfc00000-0xcfcfffff] |
| [ 0.397065] pci_bus 0000:05: extended config space not accessible |
| [ 0.397113] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode) |
| [ 0.397122] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) |
| [ 0.397123] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) |
| [ 0.397124] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) |
| [ 0.397126] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000c3fff window] (subtractive decode) |
| [ 0.397127] pci 0000:00:1e.0: bridge window [mem 0x000c8000-0x000cbfff window] (subtractive decode) |
| [ 0.397128] pci 0000:00:1e.0: bridge window [mem 0x000cc000-0x000cffff window] (subtractive decode) |
| [ 0.397129] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode) |
| [ 0.397130] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode) |
| [ 0.397131] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode) |
| [ 0.397133] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode) |
| [ 0.397134] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode) |
| [ 0.397135] pci 0000:00:1e.0: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode) |
| [ 0.397136] pci 0000:00:1e.0: bridge window [mem 0x000e8000-0x000ebfff window] (subtractive decode) |
| [ 0.397137] pci 0000:00:1e.0: bridge window [mem 0x000ec000-0x000effff window] (subtractive decode) |
| [ 0.397138] pci 0000:00:1e.0: bridge window [mem 0x000f0000-0x000fffff window] (subtractive decode) |
| [ 0.397140] pci 0000:00:1e.0: bridge window [mem 0xc4000000-0xfebfffff window] (subtractive decode) |
| [ 0.397141] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode) |
| [ 0.397164] pci_bus 0000:00: on NUMA node 0 |
| [ 0.388971] ACPI: Enabled 2 GPEs in block 00 to 3F |
| [ 0.397276] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.397324] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.397370] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.397415] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.397461] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.397506] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.397551] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.397597] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.398427] ACPI: PCI Root Bridge [UNCR] (domain 0000 [bus ff]) |
| [ 0.398432] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] |
| [ 0.398461] PCI host bridge to bus 0000:ff |
| [ 0.398462] pci_bus 0000:ff: busn_res: can not insert [bus ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff]) |
| [ 0.398465] pci_bus 0000:ff: root bus resource [bus ff] |
| [ 0.398470] pci 0000:ff:00.0: [8086:2c62] type 00 class 0x060000 |
| [ 0.398517] pci 0000:ff:00.1: [8086:2d01] type 00 class 0x060000 |
| [ 0.398579] pci 0000:ff:02.0: [8086:2d10] type 00 class 0x060000 |
| [ 0.398621] pci 0000:ff:02.1: [8086:2d11] type 00 class 0x060000 |
| [ 0.398660] pci 0000:ff:02.2: [8086:2d12] type 00 class 0x060000 |
| [ 0.398700] pci 0000:ff:02.3: [8086:2d13] type 00 class 0x060000 |
| [ 0.398747] pci_bus 0000:ff: on NUMA node 0 |
| [ 0.399151] ACPI: EC: interrupt unblocked |
| [ 0.399159] ACPI: EC: event unblocked |
| [ 0.399164] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62 |
| [ 0.399166] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC used to handle transactions and events |
| [ 0.399285] pci 0000:00:02.0: vgaarb: setting as boot VGA device |
| [ 0.399285] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none |
| [ 0.399285] pci 0000:00:02.0: vgaarb: bridge control possible |
| [ 0.399285] vgaarb: loaded |
| [ 0.399285] SCSI subsystem initialized |
| [ 0.399285] libata version 3.00 loaded. |
| [ 0.399285] ACPI: bus type USB registered |
| [ 0.399285] usbcore: registered new interface driver usbfs |
| [ 0.399285] usbcore: registered new interface driver hub |
| [ 0.399285] usbcore: registered new device driver usb |
| [ 0.399285] pps_core: LinuxPPS API ver. 1 registered |
| [ 0.399285] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> |
| [ 0.399285] PTP clock support registered |
| [ 0.399285] Advanced Linux Sound Architecture Driver Initialized. |
| [ 0.399306] PCI: Using ACPI for IRQ routing |
| [ 0.408302] PCI: pci_cache_line_size set to 64 bytes |
| [ 0.408356] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] |
| [ 0.408358] e820: reserve RAM buffer [mem 0xbf73b000-0xbfffffff] |
| [ 0.408512] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 |
| [ 0.408512] hpet0: 8 comparators, 64-bit 14.318180 MHz counter |
| [ 0.410017] clocksource: Switched to clocksource tsc-early |
| [ 0.410052] pnp: PnP ACPI init |
| [ 0.410142] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved |
| [ 0.410146] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved |
| [ 0.410149] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved |
| [ 0.410151] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved |
| [ 0.410152] system 00:00: [mem 0xe0000000-0xe3ffffff] has been reserved |
| [ 0.410154] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved |
| [ 0.410155] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved |
| [ 0.410157] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved |
| [ 0.410158] system 00:00: [mem 0x20000000-0x201fffff] could not be reserved |
| [ 0.410160] system 00:00: [mem 0x40000000-0x401fffff] could not be reserved |
| [ 0.410167] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) |
| [ 0.410657] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved |
| [ 0.410666] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) |
| [ 0.410708] system 00:02: [io 0x0500-0x057f] has been reserved |
| [ 0.410710] system 00:02: [io 0x0480-0x04bf] has been reserved |
| [ 0.410715] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) |
| [ 0.410736] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) |
| [ 0.410769] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) |
| [ 0.410796] pnp 00:05: Plug and Play ACPI device, IDs LEN0018 PNP0f13 (active) |
| [ 0.410821] pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active) |
| [ 0.410979] pnp: PnP ACPI: found 7 devices |
| [ 0.412755] thermal_sys: Registered thermal governor 'step_wise' |
| [ 0.412757] thermal_sys: Registered thermal governor 'user_space' |
| [ 0.417300] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns |
| [ 0.417315] pci 0000:00:1c.0: PCI bridge to [bus 01] |
| [ 0.417328] pci 0000:00:1c.1: PCI bridge to [bus 02] |
| [ 0.417340] pci 0000:00:1c.3: PCI bridge to [bus 03] |
| [ 0.417349] pci 0000:00:1c.4: PCI bridge to [bus 04] |
| [ 0.417353] pci 0000:00:1c.4: bridge window [mem 0xcfc00000-0xcfcfffff] |
| [ 0.417360] pci 0000:00:1e.0: PCI bridge to [bus 05] |
| [ 0.417370] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] |
| [ 0.417372] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] |
| [ 0.417373] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] |
| [ 0.417375] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] |
| [ 0.417376] pci_bus 0000:00: resource 8 [mem 0x000c8000-0x000cbfff window] |
| [ 0.417377] pci_bus 0000:00: resource 9 [mem 0x000cc000-0x000cffff window] |
| [ 0.417378] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window] |
| [ 0.417380] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window] |
| [ 0.417381] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window] |
| [ 0.417382] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window] |
| [ 0.417383] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window] |
| [ 0.417384] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window] |
| [ 0.417385] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window] |
| [ 0.417387] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window] |
| [ 0.417388] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff window] |
| [ 0.417389] pci_bus 0000:00: resource 19 [mem 0xc4000000-0xfebfffff window] |
| [ 0.417390] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed44fff window] |
| [ 0.417392] pci_bus 0000:04: resource 1 [mem 0xcfc00000-0xcfcfffff] |
| [ 0.417393] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7 window] |
| [ 0.417395] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff window] |
| [ 0.417396] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window] |
| [ 0.417397] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000c3fff window] |
| [ 0.417399] pci_bus 0000:05: resource 8 [mem 0x000c8000-0x000cbfff window] |
| [ 0.417400] pci_bus 0000:05: resource 9 [mem 0x000cc000-0x000cffff window] |
| [ 0.417401] pci_bus 0000:05: resource 10 [mem 0x000d0000-0x000d3fff window] |
| [ 0.417402] pci_bus 0000:05: resource 11 [mem 0x000d4000-0x000d7fff window] |
| [ 0.417403] pci_bus 0000:05: resource 12 [mem 0x000d8000-0x000dbfff window] |
| [ 0.417404] pci_bus 0000:05: resource 13 [mem 0x000dc000-0x000dffff window] |
| [ 0.417405] pci_bus 0000:05: resource 14 [mem 0x000e0000-0x000e3fff window] |
| [ 0.417406] pci_bus 0000:05: resource 15 [mem 0x000e4000-0x000e7fff window] |
| [ 0.417407] pci_bus 0000:05: resource 16 [mem 0x000e8000-0x000ebfff window] |
| [ 0.417409] pci_bus 0000:05: resource 17 [mem 0x000ec000-0x000effff window] |
| [ 0.417410] pci_bus 0000:05: resource 18 [mem 0x000f0000-0x000fffff window] |
| [ 0.417411] pci_bus 0000:05: resource 19 [mem 0xc4000000-0xfebfffff window] |
| [ 0.417412] pci_bus 0000:05: resource 20 [mem 0xfed40000-0xfed44fff window] |
| [ 0.417497] NET: Registered protocol family 2 |
| [ 0.417613] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) |
| [ 0.417645] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) |
| [ 0.417811] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) |
| [ 0.418113] TCP: Hash tables configured (established 65536 bind 65536) |
| [ 0.418158] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) |
| [ 0.418214] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) |
| [ 0.418303] NET: Registered protocol family 1 |
| [ 0.418433] RPC: Registered named UNIX socket transport module. |
| [ 0.418434] RPC: Registered udp transport module. |
| [ 0.418435] RPC: Registered tcp transport module. |
| [ 0.418435] RPC: Registered tcp NFSv4.1 backchannel transport module. |
| [ 0.418634] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] |
| [ 0.419003] PCI: CLS 64 bytes, default 64 |
| [ 0.419042] Unpacking initramfs... |
| [ 0.822660] Freeing initrd memory: 3416K |
| [ 0.822669] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) |
| [ 0.822670] software IO TLB: mapped [mem 0xbb73b000-0xbf73b000] (64MB) |
| [ 0.823622] Initialise system trusted keyrings |
| [ 0.823656] workingset: timestamp_bits=62 max_order=21 bucket_order=0 |
| [ 0.826057] NFS: Registering the id_resolver key type |
| [ 0.826066] Key type id_resolver registered |
| [ 0.826067] Key type id_legacy registered |
| [ 0.826113] SGI XFS with security attributes, no debug enabled |
| [ 0.830561] Key type asymmetric registered |
| [ 0.830562] Asymmetric key parser 'x509' registered |
| [ 0.830574] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) |
| [ 0.830897] pcieport 0000:00:1c.0: PME: Signaling with IRQ 24 |
| [ 0.831101] pcieport 0000:00:1c.1: PME: Signaling with IRQ 25 |
| [ 0.831291] pcieport 0000:00:1c.3: PME: Signaling with IRQ 26 |
| [ 0.831475] pcieport 0000:00:1c.4: PME: Signaling with IRQ 27 |
| [ 0.831562] intel_idle: MWAIT substates: 0x1120 |
| [ 0.831564] intel_idle: v0.4.1 model 0x25 |
| [ 0.831734] intel_idle: lapic_timer_reliable_states 0xffffffff |
| [ 0.832094] ACPI: AC Adapter [AC] (on-line) |
| [ 0.832123] ACPI Error: AE_NOT_FOUND, Error reading AC Adapter state (20190816/ac-115) |
| [ 0.832182] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1c/PNP0C09:00/PNP0C0E:00/input/input0 |
| [ 0.832257] ACPI: Sleep Button [SLPB] |
| [ 0.832348] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1c/PNP0C09:00/PNP0C0D:00/input/input1 |
| [ 0.832397] ACPI: Lid Switch [LID] |
| [ 0.832448] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 |
| [ 0.832496] ACPI: Power Button [PWRF] |
| [ 0.833834] thermal LNXTHERM:00: registered as thermal_zone0 |
| [ 0.833836] ACPI: Thermal Zone [THM0] (40 C) |
| [ 0.834857] thermal LNXTHERM:01: registered as thermal_zone1 |
| [ 0.834859] ACPI: Thermal Zone [THM1] (27 C) |
| [ 0.834958] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled |
| [ 0.835690] Non-volatile memory driver v1.3 |
| [ 0.835692] Linux agpgart interface v0.103 |
| [ 0.836129] pci 0000:00:00.0: Intel HD Graphics Chipset |
| [ 0.836152] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable |
| [ 0.836660] pci 0000:00:00.0: detected 32768K stolen memory |
| [ 0.836784] i915 0000:00:02.0: vgaarb: deactivate vga console |
| [ 0.849403] battery: ACPI: Battery Slot [BAT0] (battery present) |
| [ 0.849684] battery: ACPI: Battery Slot [BAT1] (battery absent) |
| [ 0.837600] Console: switching to colour dummy device 80x25 |
| [ 0.890374] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). |
| [ 0.890377] [drm] Driver supports precise vblank timestamp query. |
| [ 0.890668] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem |
| [ 0.924902] [drm] RC6 disabled, disabling runtime PM support |
| [ 0.925753] [drm] Initialized i915 1.6.0 20190822 for 0000:00:02.0 on minor 0 |
| [ 0.925890] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) |
| [ 0.933006] acpi device:25: registered as cooling_device5 |
| [ 0.933054] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3 |
| [ 0.934493] loop: module loaded |
| [ 0.934599] ahci 0000:00:1f.2: version 3.0 |
| [ 0.934774] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled |
| [ 0.934796] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3 impl SATA mode |
| [ 0.934799] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst |
| [ 0.935283] scsi host0: ahci |
| [ 0.935416] scsi host1: ahci |
| [ 0.935511] scsi host2: ahci |
| [ 0.935604] scsi host3: ahci |
| [ 0.935700] scsi host4: ahci |
| [ 0.935795] scsi host5: ahci |
| [ 0.935857] ata1: SATA max UDMA/133 abar m2048@0xcfd26000 port 0xcfd26100 irq 29 |
| [ 0.935860] ata2: SATA max UDMA/133 abar m2048@0xcfd26000 port 0xcfd26180 irq 29 |
| [ 0.935862] ata3: DUMMY |
| [ 0.935863] ata4: DUMMY |
| [ 0.935864] ata5: DUMMY |
| [ 0.935865] ata6: DUMMY |
| [ 0.935908] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k |
| [ 0.935909] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. |
| [ 0.936042] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode |
| [ 0.950311] fbcon: i915drmfb (fb0) is primary device |
| [ 1.091388] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:26:2d:fb:7f:aa |
| [ 1.091394] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection |
| [ 1.091451] e1000e 0000:00:19.0 eth0: MAC: 9, PHY: 10, PBA No: A002FF-0FF |
| [ 1.246286] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) |
| [ 1.248252] ata1.00: supports DRM functions and may not be fully accessible |
| [ 1.248689] ata1.00: NCQ Send/Recv Log not supported |
| [ 1.248691] ata1.00: ATA-9: Samsung SSD 840 EVO 250GB, EXT0BB6Q, max UDMA/133 |
| [ 1.248692] ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 32), AA |
| [ 1.249483] ata1.00: supports DRM functions and may not be fully accessible |
| [ 1.249912] ata1.00: NCQ Send/Recv Log not supported |
| [ 1.250296] ata1.00: configured for UDMA/133 |
| [ 1.522654] ath: EEPROM regdomain: 0x0 |
| [ 1.522656] ath: EEPROM indicates default country code should be used |
| [ 1.522656] ath: doing EEPROM country->regdmn map search |
| [ 1.522657] ath: country maps to regdmn code: 0x3a |
| [ 1.522658] ath: Country alpha2 being used: US |
| [ 1.522659] ath: Regpair used: 0x3a |
| [ 1.528590] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' |
| [ 1.528851] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 |
| [ 1.528853] cfg80211: failed to load regulatory.db |
| [ 1.528885] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xffffc900004f0000, irq=16 |
| [ 1.528946] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| [ 1.528948] ehci-pci: EHCI PCI platform driver |
| [ 1.529082] ehci-pci 0000:00:1a.0: EHCI Host Controller |
| [ 1.529090] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 |
| [ 1.529102] ehci-pci 0000:00:1a.0: debug port 2 |
| [ 1.533013] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported |
| [ 1.533027] ehci-pci 0000:00:1a.0: irq 19, io mem 0xcfd27000 |
| [ 1.540066] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 |
| [ 1.540200] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 |
| [ 1.540202] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.540204] usb usb1: Product: EHCI Host Controller |
| [ 1.540205] usb usb1: Manufacturer: Linux 5.4.44-rt26 ehci_hcd |
| [ 1.540206] usb usb1: SerialNumber: 0000:00:1a.0 |
| [ 1.540478] hub 1-0:1.0: USB hub found |
| [ 1.540492] hub 1-0:1.0: 2 ports detected |
| [ 1.540725] ehci-pci 0000:00:1d.0: EHCI Host Controller |
| [ 1.540731] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 |
| [ 1.540741] ehci-pci 0000:00:1d.0: debug port 2 |
| [ 1.544638] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported |
| [ 1.544649] ehci-pci 0000:00:1d.0: irq 18, io mem 0xcfd28000 |
| [ 1.551094] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 |
| [ 1.551154] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 |
| [ 1.551157] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.551160] usb usb2: Product: EHCI Host Controller |
| [ 1.551162] usb usb2: Manufacturer: Linux 5.4.44-rt26 ehci_hcd |
| [ 1.551164] usb usb2: SerialNumber: 0000:00:1d.0 |
| [ 1.551315] hub 2-0:1.0: USB hub found |
| [ 1.551325] hub 2-0:1.0: 2 ports detected |
| [ 1.551496] usbcore: registered new interface driver usb-storage |
| [ 1.551521] usbcore: registered new interface driver usbserial_generic |
| [ 1.551530] usbserial: USB Serial support registered for generic |
| [ 1.551541] usbcore: registered new interface driver ftdi_sio |
| [ 1.551549] usbserial: USB Serial support registered for FTDI USB Serial Device |
| [ 1.551582] usbcore: registered new interface driver mct_u232 |
| [ 1.551591] usbserial: USB Serial support registered for MCT U232 |
| [ 1.551603] usbcore: registered new interface driver pl2303 |
| [ 1.551613] usbserial: USB Serial support registered for pl2303 |
| [ 1.551666] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 |
| [ 1.554995] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| [ 1.555025] serio: i8042 AUX port at 0x60,0x64 irq 12 |
| [ 1.555112] mousedev: PS/2 mouse device common for all mice |
| [ 1.555537] rtc_cmos 00:03: RTC can wake from S4 |
| [ 1.555792] rtc_cmos 00:03: registered as rtc0 |
| [ 1.555794] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs |
| [ 1.555939] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt |
| [ 1.556364] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com |
| [ 1.556421] usbcore: registered new interface driver usbhid |
| [ 1.556422] usbhid: USB HID core driver |
| [ 1.556485] thinkpad_acpi: ThinkPad ACPI Extras v0.26 |
| [ 1.556486] thinkpad_acpi: http://ibm-acpi.sf.net/ |
| [ 1.556486] thinkpad_acpi: ThinkPad BIOS CBET4000 4.12-284-g165efa1b86, EC 6QHT34WW-3.18 |
| [ 1.556487] thinkpad_acpi: Lenovo ThinkPad X201, model 3626F7U |
| [ 1.556655] random: fast init done |
| [ 1.557254] thinkpad_acpi: radio switch found; radios are enabled |
| [ 1.557403] thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode |
| [ 1.557415] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver |
| [ 1.557416] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... |
| [ 1.559486] thinkpad_acpi: rfkill switch tpacpi_wwan_sw: radio is unblocked |
| [ 1.562832] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one |
| [ 1.562834] thinkpad_acpi: volume: disabled as there is no ALSA support in this kernel |
| [ 1.565885] thinkpad_acpi: battery 1 registered (start 0, stop 100) |
| [ 1.565890] battery: new extension: ThinkPad Battery Extension |
| [ 1.565930] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input5 |
| [ 1.566346] usbcore: registered new interface driver snd-usb-audio |
| [ 1.566573] NET: Registered protocol family 10 |
| [ 1.567199] Segment Routing with IPv6 |
| [ 1.567301] NET: Registered protocol family 17 |
| [ 1.567317] 8021q: 802.1Q VLAN Support v1.8 |
| [ 1.567407] Key type dns_resolver registered |
| [ 1.567836] microcode: sig=0x20652, pf=0x10, revision=0x11 |
| [ 1.567908] microcode: Microcode Update Driver: v2.2. |
| [ 1.567913] IPI shorthand broadcast: enabled |
| [ 1.567921] SSE version of gcm_enc/dec engaged. |
| [ 1.568049] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 |
| [ 1.568644] sched_clock: Marking stable (1566167438, 2474753)->(1573232551, -4590360) |
| [ 1.568741] registered taskstats version 1 |
| [ 1.568743] Loading compiled-in X.509 certificates |
| [ 1.569202] cfg80211: Loading compiled-in X.509 certificates for regulatory database |
| [ 1.569735] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' |
| [ 1.569741] ALSA device list: |
| [ 1.569743] No soundcards found. |
| [ 1.854000] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops 0xffffffff81e7e1e0) |
| [ 1.853883] Console: switching to colour frame buffer device 160x50 |
| [ 1.861991] tsc: Refined TSC clocksource calibration: 2527.000 MHz |
| [ 1.861999] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x246cdbae981, max_idle_ns: 440795219599 ns |
| [ 1.862034] clocksource: Switched to clocksource tsc |
| [ 1.863995] usb 1-1: new high-speed USB device number 2 using ehci-pci |
| [ 1.864453] snd_hda_codec_conexant hdaudioC0D0: CX20585: BIOS auto-probing. |
| [ 1.864929] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20585: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker |
| [ 1.864934] snd_hda_codec_conexant hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) |
| [ 1.864937] snd_hda_codec_conexant hdaudioC0D0: hp_outs=2 (0x1c/0x19/0x0/0x0/0x0) |
| [ 1.864940] snd_hda_codec_conexant hdaudioC0D0: mono: mono_out=0x0 |
| [ 1.864942] snd_hda_codec_conexant hdaudioC0D0: inputs: |
| [ 1.864944] snd_hda_codec_conexant hdaudioC0D0: Internal Mic=0x23 |
| [ 1.864947] snd_hda_codec_conexant hdaudioC0D0: Mic=0x1b |
| [ 1.864949] snd_hda_codec_conexant hdaudioC0D0: Dock Mic=0x1a |
| [ 1.869158] snd_hda_codec_generic hdaudioC0D3: autoconfig for Generic: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line |
| [ 1.869163] snd_hda_codec_generic hdaudioC0D3: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) |
| [ 1.869165] snd_hda_codec_generic hdaudioC0D3: hp_outs=0 (0x0/0x0/0x0/0x0/0x0) |
| [ 1.869168] snd_hda_codec_generic hdaudioC0D3: mono: mono_out=0x0 |
| [ 1.869170] snd_hda_codec_generic hdaudioC0D3: dig-out=0x5/0x0 |
| [ 1.869172] snd_hda_codec_generic hdaudioC0D3: inputs: |
| [ 1.870524] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 |
| [ 1.870623] input: HDA Intel MID Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 |
| [ 1.870796] input: HDA Intel MID Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 |
| [ 1.870872] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 |
| [ 1.870934] input: HDA Intel MID HDMI as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 |
| [ 1.871989] usb 2-1: new high-speed USB device number 2 using ehci-pci |
| [ 1.873936] i915 0000:00:02.0: fb0: i915drmfb frame buffer device |
| [ 1.874265] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 BB6Q PQ: 0 ANSI: 5 |
| [ 1.874490] sd 0:0:0:0: Attached scsi generic sg0 type 0 |
| [ 1.874565] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB) |
| [ 1.874577] sd 0:0:0:0: [sda] Write Protect is off |
| [ 1.874579] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 |
| [ 1.874595] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 1.878013] sda: sda1 sda2 |
| [ 1.878395] sd 0:0:0:0: [sda] Attached SCSI disk |
| [ 1.992383] usb 1-1: New USB device found, idVendor=8087, idProduct=0020, bcdDevice= 0.00 |
| [ 1.992389] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 1.992766] hub 1-1:1.0: USB hub found |
| [ 1.992816] hub 1-1:1.0: 6 ports detected |
| [ 2.000474] usb 2-1: New USB device found, idVendor=8087, idProduct=0020, bcdDevice= 0.00 |
| [ 2.000480] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 2.000753] hub 2-1:1.0: USB hub found |
| [ 2.000823] hub 2-1:1.0: 8 ports detected |
| [ 2.180749] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) |
| [ 2.183331] ata2.00: ATAPI: HL-DT-ST DVDRAM GU40N, QX20, max UDMA/133 |
| [ 2.186314] ata2.00: configured for UDMA/133 |
| [ 2.188346] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GU40N QX20 PQ: 0 ANSI: 5 |
| [ 2.231596] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray |
| [ 2.231599] cdrom: Uniform CD-ROM driver Revision: 3.20 |
| [ 2.231758] sr 1:0:0:0: Attached scsi CD-ROM sr0 |
| [ 2.231857] sr 1:0:0:0: Attached scsi generic sg1 type 5 |
| [ 2.232396] Freeing unused kernel image memory: 904K |
| [ 2.239098] Write protecting the kernel read-only data: 18432k |
| [ 2.239963] Freeing unused kernel image memory: 2012K |
| [ 2.240492] Freeing unused kernel image memory: 1248K |
| [ 2.240555] rodata_test: all tests were successful |
| [ 2.240584] Run /init as init process |
| [ 2.262987] usb 1-1.5: new high-speed USB device number 3 using ehci-pci |
| [ 2.279988] usb 2-1.1: new high-speed USB device number 3 using ehci-pci |
| [ 2.341349] usb 1-1.5: New USB device found, idVendor=17ef, idProduct=1005, bcdDevice= 0.01 |
| [ 2.341355] usb 1-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 2.341603] hub 1-1.5:1.0: USB hub found |
| [ 2.341686] hub 1-1.5:1.0: 4 ports detected |
| [ 2.373412] psmouse serio1: synaptics: queried max coordinates: x [..5888], y [..4810] |
| [ 2.453582] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd047b1/0xb40000/0xa0000/0x0, board id: 0, fw id: 615624 |
| [ 2.453600] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0 |
| [ 2.504772] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8 |
| [ 2.608469] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=0159, bcdDevice=58.88 |
| [ 2.608477] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [ 2.608480] usb 2-1.1: Product: USB2.0-CRW |
| [ 2.608483] usb 2-1.1: Manufacturer: Generic |
| [ 2.608490] usb 2-1.1: SerialNumber: 20071114173400000 |
| [ 2.613399] usb-storage 2-1.1:1.0: USB Mass Storage device detected |
| [ 2.613558] scsi host6: usb-storage 2-1.1:1.0 |
| [ 2.678986] usb 2-1.4: new high-speed USB device number 4 using ehci-pci |
| [ 2.759700] usb 2-1.4: New USB device found, idVendor=12d1, idProduct=15c1, bcdDevice= 1.02 |
| [ 2.759706] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [ 2.759709] usb 2-1.4: Product: HUAWEI Mobile V7R11 |
| [ 2.759711] usb 2-1.4: Manufacturer: Huawei Technologies Co., Ltd. |
| [ 2.759713] usb 2-1.4: SerialNumber: 0123456789ABCDEF |
| [ 2.808333] random: lvm: uninitialized urandom read (4 bytes read) |
| [ 2.848036] random: lvm: uninitialized urandom read (4 bytes read) |
| [ 2.878923] random: lvm: uninitialized urandom read (4 bytes read) |
| [ 3.261634] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 |
| [ 3.520089] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input14 |
| [ 3.656542] scsi 6:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS |
| [ 3.656735] sd 6:0:0:0: Attached scsi generic sg2 type 0 |
| [ 5.284448] random: crng init done |
| [ 10.762479] usb 2-1.1: USB disconnect, device number 3 |
| [ 10.770089] sd 6:0:0:0: [sdb] Attached SCSI removable disk |
| [ 10.919883] XFS (dm-5): Mounting V4 Filesystem |
| [ 10.988724] XFS (dm-5): Ending clean mount |
| [ 12.792351] udevd[3779]: starting version 3.2.9 |
| [ 12.856931] udevd[3779]: starting eudev-3.2.9 |
| [ 12.968652] usbcore: registered new interface driver option |
| [ 12.968669] usbserial: USB Serial support registered for GSM modem (1-port) |
| [ 13.080558] option 2-1.4:2.2: GSM modem (1-port) converter detected |
| [ 13.080740] usb 2-1.4: GSM modem (1-port) converter now attached to ttyUSB0 |
| [ 13.080832] option 2-1.4:2.3: GSM modem (1-port) converter detected |
| [ 13.081015] usb 2-1.4: GSM modem (1-port) converter now attached to ttyUSB1 |
| [ 13.081093] option 2-1.4:2.4: GSM modem (1-port) converter detected |
| [ 13.081178] usb 2-1.4: GSM modem (1-port) converter now attached to ttyUSB2 |
| [ 13.081224] option 2-1.4:2.5: GSM modem (1-port) converter detected |
| [ 13.081287] usb 2-1.4: GSM modem (1-port) converter now attached to ttyUSB3 |
| [ 13.081332] option 2-1.4:2.6: GSM modem (1-port) converter detected |
| [ 13.081390] usb 2-1.4: GSM modem (1-port) converter now attached to ttyUSB4 |
| [ 14.126700] xfs filesystem being remounted at / supports timestamps until 2038 (0x7fffffff) |
| [ 14.333723] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem |
| [ 14.346876] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null) |
| [ 14.352231] XFS (dm-6): Mounting V5 Filesystem |
| [ 14.409340] XFS (dm-6): Ending clean mount |
| [ 14.440296] xfs filesystem being mounted at /home supports timestamps until 2038 (0x7fffffff) |
| [ 14.456302] XFS (dm-9): Mounting V5 Filesystem |
| [ 14.668474] XFS (dm-9): Ending clean mount |
| [ 14.686698] xfs filesystem being mounted at /home/stefan/documents supports timestamps until 2038 (0x7fffffff) |
| [ 14.692225] XFS (dm-7): Mounting V5 Filesystem |
| [ 14.773959] XFS (dm-7): Ending clean mount |
| [ 14.784724] xfs filesystem being mounted at /opt/games supports timestamps until 2038 (0x7fffffff) |
| [ 17.730791] broken atomic modeset userspace detected, disabling atomic |
| [ 18.472398] wlan0: authenticate with 04:f0:21:3b:fc:7a |
| [ 18.491787] wlan0: send auth to 04:f0:21:3b:fc:7a (try 1/3) |
| [ 18.493691] wlan0: authenticated |
| [ 18.495039] wlan0: associate with 04:f0:21:3b:fc:7a (try 1/3) |
| [ 18.497104] wlan0: RX AssocResp from 04:f0:21:3b:fc:7a (capab=0x11 status=0 aid=2) |
| [ 18.497292] wlan0: associated |
| [ 18.513131] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready |
| [ 19.458557] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx |
| [ 19.458610] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready |
| [ 19.967712] wlan0: deauthenticating from 04:f0:21:3b:fc:7a by local choice (Reason: 3=DEAUTH_LEAVING) |
| [ 150.585010] NFS: bad mount option value specified: minorversion=1 |
| [14482.562604] ACPI: \_SB_.DOCK: undocking |
| [14482.564239] ACPI: \_SB_.DOCK: No _EJ0 support for device |
| [14482.790881] usb 1-1.5: USB disconnect, device number 3 |
| [14483.066603] PM: suspend entry (deep) |
| [14483.076353] Filesystems sync: 0.009 seconds |
| [14483.076575] Freezing user space processes ... (elapsed 0.001 seconds) done. |
| [14483.078012] OOM killer disabled. |
| [14483.078014] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. |
| [14483.079218] printk: Suspending console(s) (use no_console_suspend to debug) |
| [14483.252601] sd 0:0:0:0: [sda] Synchronizing SCSI cache |
| [14483.253818] sd 0:0:0:0: [sda] Stopping disk |
| [14483.304642] e1000e: EEE TX LPI TIMER: 00000000 |
| [14483.892979] ACPI: EC: interrupt blocked |
| [14483.916623] ACPI: Preparing to enter system sleep state S3 |
| [14483.927709] ACPI: EC: event blocked |
| [14483.927711] ACPI: EC: EC stopped |
| [14483.927711] PM: Saving platform NVS memory |
| [14483.927713] Disabling non-boot CPUs ... |
| [14483.929126] smpboot: CPU 1 is now offline |
| [14483.930832] smpboot: CPU 2 is now offline |
| [14483.932503] smpboot: CPU 3 is now offline |
| [14483.933546] ACPI: Low-level resume complete |
| [14483.933591] ACPI: EC: EC started |
| [14483.933592] PM: Restoring platform NVS memory |
| [14483.933921] Enabling non-boot CPUs ... |
| [14483.933959] x86: Booting SMP configuration: |
| [14483.933960] smpboot: Booting Node 0 Processor 1 APIC 0x1 |
| [14483.936728] CPU1 is up |
| [14483.936749] smpboot: Booting Node 0 Processor 2 APIC 0x4 |
| [14483.939457] CPU2 is up |
| [14483.939479] smpboot: Booting Node 0 Processor 3 APIC 0x5 |
| [14483.942205] CPU3 is up |
| [14483.943916] ACPI: Waking up from system sleep state S3 |
| [14483.952817] ACPI: EC: interrupt unblocked |
| [14483.952822] pci 0000:00:16.0: Refused to change power state, currently in D3 |
| [14484.015340] ACPI: EC: event unblocked |
| [14484.016714] sd 0:0:0:0: [sda] Starting disk |
| [14484.325389] ata2: SATA link down (SStatus 0 SControl 300) |
| [14484.726071] psmouse serio1: synaptics: queried max coordinates: x [..5888], y [..4810] |
| [14489.799503] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) |
| [14489.801500] ata1.00: supports DRM functions and may not be fully accessible |
| [14489.801982] ata1.00: NCQ Send/Recv Log not supported |
| [14489.803032] ata1.00: supports DRM functions and may not be fully accessible |
| [14489.803561] ata1.00: NCQ Send/Recv Log not supported |
| [14489.804012] ata1.00: configured for UDMA/133 |
| [14489.819215] OOM killer enabled. |
| [14489.819217] Restarting tasks ... done. |
| [14489.842410] video LNXVIDEO:00: Restoring backlight state |
| [14489.846458] PM: suspend exit |
| [14489.892395] usb 2-1.1: new high-speed USB device number 5 using ehci-pci |
| [14489.987628] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=0159, bcdDevice=58.88 |
| [14489.987636] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [14489.987638] usb 2-1.1: Product: USB2.0-CRW |
| [14489.987641] usb 2-1.1: Manufacturer: Generic |
| [14489.987643] usb 2-1.1: SerialNumber: 20071114173400000 |
| [14489.992543] usb-storage 2-1.1:1.0: USB Mass Storage device detected |
| [14489.992690] scsi host6: usb-storage 2-1.1:1.0 |
| [14489.993209] usb 2-1.4: USB disconnect, device number 4 |
| [14489.993580] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 |
| [14489.993601] option 2-1.4:2.2: device disconnected |
| [14489.993832] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 |
| [14489.993849] option 2-1.4:2.3: device disconnected |
| [14489.994148] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2 |
| [14489.994165] option 2-1.4:2.4: device disconnected |
| [14489.994503] option1 ttyUSB3: GSM modem (1-port) converter now disconnected from ttyUSB3 |
| [14489.994521] option 2-1.4:2.5: device disconnected |
| [14489.994850] option1 ttyUSB4: GSM modem (1-port) converter now disconnected from ttyUSB4 |
| [14489.994867] option 2-1.4:2.6: device disconnected |
| [14490.108482] udevd[7150]: error opening ATTR{/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/host6/scsi_host/host6/link_power_management_policy} for writing: Permission denied |
| [14490.109218] ata2: SATA link down (SStatus 0 SControl 300) |
| [14490.166455] usb 2-1.4: new high-speed USB device number 6 using ehci-pci |
| [14490.246121] usb 2-1.4: New USB device found, idVendor=12d1, idProduct=15c1, bcdDevice= 1.02 |
| [14490.246127] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [14490.246130] usb 2-1.4: Product: HUAWEI Mobile V7R11 |
| [14490.246132] usb 2-1.4: Manufacturer: Huawei Technologies Co., Ltd. |
| [14490.246134] usb 2-1.4: SerialNumber: 0123456789ABCDEF |
| [14490.248680] option 2-1.4:2.2: GSM modem (1-port) converter detected |
| [14490.248776] usb 2-1.4: GSM modem (1-port) converter now attached to ttyUSB0 |
| [14490.249049] option 2-1.4:2.3: GSM modem (1-port) converter detected |
| [14490.249115] usb 2-1.4: GSM modem (1-port) converter now attached to ttyUSB1 |
| [14490.249401] option 2-1.4:2.4: GSM modem (1-port) converter detected |
| [14490.249479] usb 2-1.4: GSM modem (1-port) converter now attached to ttyUSB2 |
| [14490.249800] option 2-1.4:2.5: GSM modem (1-port) converter detected |
| [14490.249879] usb 2-1.4: GSM modem (1-port) converter now attached to ttyUSB3 |
| [14490.250142] option 2-1.4:2.6: GSM modem (1-port) converter detected |
| [14490.250202] usb 2-1.4: GSM modem (1-port) converter now attached to ttyUSB4 |
| [14491.017915] scsi 6:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS |
| [14491.018262] sd 6:0:0:0: Attached scsi generic sg2 type 0 |
| [14492.296050] wlan0: authenticate with 04:f0:21:3b:fc:7a |
| [14492.317765] wlan0: send auth to 04:f0:21:3b:fc:7a (try 1/3) |
| [14492.319711] wlan0: authenticated |
| [14492.320426] wlan0: associate with 04:f0:21:3b:fc:7a (try 1/3) |
| [14492.323129] wlan0: RX AssocResp from 04:f0:21:3b:fc:7a (capab=0x11 status=0 aid=1) |
| [14492.323331] wlan0: associated |
| [14495.741840] ata2: SATA link down (SStatus 0 SControl 300) |
| [14495.741854] ata2.00: disabled |
| [14495.741878] sr 1:0:0:0: rejecting I/O to offline device |
| [14495.741894] ata2.00: detaching (SCSI 1:0:0:0) |
| [14498.115353] sd 6:0:0:0: [sdb] Attached SCSI removable disk |
| [14502.336391] usb 2-1.1: USB disconnect, device number 5 |
| [14502.349761] udevd[7147]: inotify_add_watch(7, /dev/sdb, 10) failed: No such file or directory |
| [14502.352853] udevd[7153]: inotify_add_watch(7, /dev/sdb, 10) failed: No such file or directory |
| [14502.361743] udevd[7147]: error opening ATTR{/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/host6/scsi_host/host6/link_power_management_policy} for writing: No such file or directory |
| [21575.599480] ACPI: \_SB_.DOCK: undocking |
| [21575.601242] ACPI: \_SB_.DOCK: No _EJ0 support for device |
| [21576.103279] PM: suspend entry (deep) |
| [21576.111551] Filesystems sync: 0.008 seconds |
| [21576.111770] Freezing user space processes ... (elapsed 0.001 seconds) done. |
| [21576.113390] OOM killer disabled. |
| [21576.113393] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. |
| [21576.114634] printk: Suspending console(s) (use no_console_suspend to debug) |
| [21576.286709] sd 0:0:0:0: [sda] Synchronizing SCSI cache |
| [21576.289644] sd 0:0:0:0: [sda] Stopping disk |
| [21576.333159] wlan0: deauthenticating from 04:f0:21:3b:fc:7a by local choice (Reason: 3=DEAUTH_LEAVING) |
| [21576.334078] e1000e: EEE TX LPI TIMER: 00000000 |
| [21576.928244] ACPI: EC: interrupt blocked |
| [21576.951801] ACPI: Preparing to enter system sleep state S3 |
| [21576.962982] ACPI: EC: event blocked |
| [21576.962983] ACPI: EC: EC stopped |
| [21576.962984] PM: Saving platform NVS memory |
| [21576.962986] Disabling non-boot CPUs ... |
| [21576.964431] smpboot: CPU 1 is now offline |
| [21576.966212] smpboot: CPU 2 is now offline |
| [21576.967919] smpboot: CPU 3 is now offline |
| [21576.968866] ACPI: Low-level resume complete |
| [21576.968911] ACPI: EC: EC started |
| [21576.968911] PM: Restoring platform NVS memory |
| [21576.969257] Enabling non-boot CPUs ... |
| [21576.969299] x86: Booting SMP configuration: |
| [21576.969300] smpboot: Booting Node 0 Processor 1 APIC 0x1 |
| [21576.972050] CPU1 is up |
| [21576.972071] smpboot: Booting Node 0 Processor 2 APIC 0x4 |
| [21576.974772] CPU2 is up |
| [21576.974793] smpboot: Booting Node 0 Processor 3 APIC 0x5 |
| [21576.977413] CPU3 is up |
| [21576.979130] ACPI: Waking up from system sleep state S3 |
| [21576.988971] ACPI: EC: interrupt unblocked |
| [21576.988984] pci 0000:00:16.0: Refused to change power state, currently in D3 |
| [21577.014985] ACPI: EC: event unblocked |
| [21577.015731] sd 0:0:0:0: [sda] Starting disk |
| [21577.326476] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) |
| [21577.429627] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) |
| [21577.429997] ata1.00: supports DRM functions and may not be fully accessible |
| [21577.430568] ata1.00: NCQ Send/Recv Log not supported |
| [21577.431638] ata1.00: supports DRM functions and may not be fully accessible |
| [21577.432175] ata1.00: NCQ Send/Recv Log not supported |
| [21577.432867] ata1.00: configured for UDMA/133 |
| [21577.799849] psmouse serio1: synaptics: queried max coordinates: x [..5888], y [..4810] |
| [21579.379292] OOM killer enabled. |
| [21579.402088] video LNXVIDEO:00: Restoring backlight state |
| [21579.405591] PM: suspend exit |
| [21579.449544] usb 2-1.1: new high-speed USB device number 7 using ehci-pci |
| [21579.541892] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=0159, bcdDevice=58.88 |
| [21579.541899] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [21579.541903] usb 2-1.1: Product: USB2.0-CRW |
| [21579.541906] usb 2-1.1: Manufacturer: Generic |
| [21579.541909] usb 2-1.1: SerialNumber: 20071114173400000 |
| [21579.546925] usb-storage 2-1.1:1.0: USB Mass Storage device detected |
| [21579.547121] scsi host6: usb-storage 2-1.1:1.0 |
| [21579.547603] usb 2-1.4: USB disconnect, device number 6 |
| [21579.547997] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 |
| [21579.548023] option 2-1.4:2.2: device disconnected |
| [21579.548554] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 |
| [21579.548583] option 2-1.4:2.3: device disconnected |
| [21579.548746] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2 |
| [21579.548764] option 2-1.4:2.4: device disconnected |
| [21579.548928] udevd[20252]: error opening ATTR{/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/host6/scsi_host/host6/link_power_management_policy} for writing: Permission denied |
| [21579.549076] option1 ttyUSB3: GSM modem (1-port) converter now disconnected from ttyUSB3 |
| [21579.549105] option 2-1.4:2.5: device disconnected |
| [21579.550241] option1 ttyUSB4: GSM modem (1-port) converter now disconnected from ttyUSB4 |
| [21579.550270] option 2-1.4:2.6: device disconnected |
| [21579.553565] usb 1-1.5: new high-speed USB device number 4 using ehci-pci |
| [21579.632036] usb 1-1.5: New USB device found, idVendor=17ef, idProduct=1005, bcdDevice= 0.01 |
| [21579.632041] usb 1-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [21579.632319] hub 1-1.5:1.0: USB hub found |
| [21579.632460] hub 1-1.5:1.0: 4 ports detected |
| [21580.276111] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx |
| [21580.555418] scsi 6:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS |
| [21580.555848] sd 6:0:0:0: Attached scsi generic sg1 type 0 |
| [21579.379294] Restarting tasks ... done. |
| [21581.029652] usb 2-1.4: new high-speed USB device number 8 using ehci-pci |
| [21581.110150] usb 2-1.4: New USB device found, idVendor=12d1, idProduct=15c1, bcdDevice= 1.02 |
| [21581.110156] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [21581.110160] usb 2-1.4: Product: HUAWEI Mobile V7R11 |
| [21581.110162] usb 2-1.4: Manufacturer: Huawei Technologies Co., Ltd. |
| [21581.110165] usb 2-1.4: SerialNumber: 0123456789ABCDEF |
| [21581.112959] option 2-1.4:2.2: GSM modem (1-port) converter detected |
| [21581.113081] usb 2-1.4: GSM modem (1-port) converter now attached to ttyUSB0 |
| [21581.113460] option 2-1.4:2.3: GSM modem (1-port) converter detected |
| [21581.113595] usb 2-1.4: GSM modem (1-port) converter now attached to ttyUSB1 |
| [21581.113980] option 2-1.4:2.4: GSM modem (1-port) converter detected |
| [21581.114088] usb 2-1.4: GSM modem (1-port) converter now attached to ttyUSB2 |
| [21581.114466] option 2-1.4:2.5: GSM modem (1-port) converter detected |
| [21581.114591] usb 2-1.4: GSM modem (1-port) converter now attached to ttyUSB3 |
| [21581.114959] option 2-1.4:2.6: GSM modem (1-port) converter detected |
| [21581.115063] usb 2-1.4: GSM modem (1-port) converter now attached to ttyUSB4 |
| [21591.280408] usb 2-1.1: USB disconnect, device number 7 |
| [21591.288615] sd 6:0:0:0: [sdb] Attached SCSI removable disk |
| [21591.290981] udevd[20322]: inotify_add_watch(7, /dev/sdb, 10) failed: No such file or directory |
| [21591.295864] udevd[20322]: error opening ATTR{/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/host6/scsi_host/host6/link_power_management_policy} for writing: No such file or directory |
| [21591.297500] udevd[20252]: inotify_add_watch(7, /dev/sdb, 10) failed: No such file or directory |
| [23784.099139] ACPI: \_SB_.DOCK: undocking |
| [23784.100644] ACPI: \_SB_.DOCK: No _EJ0 support for device |
| [23784.329227] usb 1-1.5: USB disconnect, device number 4 |
| [23784.602513] PM: suspend entry (deep) |
| [23784.620593] Filesystems sync: 0.018 seconds |
| [23784.620877] Freezing user space processes ... (elapsed 0.001 seconds) done. |
| [23784.622237] OOM killer disabled. |
| [23784.622240] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. |
| [23784.623404] printk: Suspending console(s) (use no_console_suspend to debug) |
| [23784.800730] sd 0:0:0:0: [sda] Synchronizing SCSI cache |
| [23784.803705] sd 0:0:0:0: [sda] Stopping disk |
| [23784.849969] e1000e: EEE TX LPI TIMER: 00000000 |
| [23785.438178] ACPI: EC: interrupt blocked |
| [23785.461761] ACPI: Preparing to enter system sleep state S3 |
| [23785.475355] ACPI: EC: event blocked |
| [23785.475355] ACPI: EC: EC stopped |
| [23785.475356] PM: Saving platform NVS memory |
| [23785.475357] Disabling non-boot CPUs ... |
| [23785.476710] smpboot: CPU 1 is now offline |
| [23785.478641] smpboot: CPU 2 is now offline |
| [23785.480358] smpboot: CPU 3 is now offline |
| [23785.481302] ACPI: Low-level resume complete |
| [23785.481347] ACPI: EC: EC started |
| [23785.481348] PM: Restoring platform NVS memory |
| [23785.481676] Enabling non-boot CPUs ... |
| [23785.481714] x86: Booting SMP configuration: |
| [23785.481715] smpboot: Booting Node 0 Processor 1 APIC 0x1 |
| [23785.484487] CPU1 is up |
| [23785.484509] smpboot: Booting Node 0 Processor 2 APIC 0x4 |
| [23785.487195] CPU2 is up |
| [23785.487218] smpboot: Booting Node 0 Processor 3 APIC 0x5 |
| [23785.489940] CPU3 is up |
| [23785.491652] ACPI: Waking up from system sleep state S3 |
| [23785.501006] ACPI: EC: interrupt unblocked |
| [23785.501011] pci 0000:00:16.0: Refused to change power state, currently in D3 |
| [23785.527020] ACPI: EC: event unblocked |
| [23785.527705] sd 0:0:0:0: [sda] Starting disk |
| [23785.839538] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) |
| [23785.934574] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) |
| [23785.934854] ata1.00: supports DRM functions and may not be fully accessible |
| [23785.935325] ata1.00: NCQ Send/Recv Log not supported |
| [23785.936122] ata1.00: supports DRM functions and may not be fully accessible |
| [23785.936550] ata1.00: NCQ Send/Recv Log not supported |
| [23785.937121] ata1.00: configured for UDMA/133 |
| [23786.309864] psmouse serio1: synaptics: queried max coordinates: x [..5888], y [..4810] |
| [23787.891896] OOM killer enabled. |
| [23787.891897] Restarting tasks ... |
| [23787.920358] video LNXVIDEO:00: Restoring backlight state |
| [23787.922622] PM: suspend exit |
| [23787.974644] usb 2-1.1: new high-speed USB device number 9 using ehci-pci |
| [23788.066372] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=0159, bcdDevice=58.88 |
| [23788.066378] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [23788.066380] usb 2-1.1: Product: USB2.0-CRW |
| [23788.066383] usb 2-1.1: Manufacturer: Generic |
| [23788.066385] usb 2-1.1: SerialNumber: 20071114173400000 |
| [23787.898884] done. |
| [23788.066539] usb 1-1.5: new high-speed USB device number 5 using ehci-pci |
| [23788.071300] usb-storage 2-1.1:1.0: USB Mass Storage device detected |
| [23788.071466] scsi host6: usb-storage 2-1.1:1.0 |
| [23788.072001] usb 2-1.4: USB disconnect, device number 8 |
| [23788.072360] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 |
| [23788.072387] option 2-1.4:2.2: device disconnected |
| [23788.072601] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 |
| [23788.072623] option 2-1.4:2.3: device disconnected |
| [23788.072791] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2 |
| [23788.072812] option 2-1.4:2.4: device disconnected |
| [23788.072973] option1 ttyUSB3: GSM modem (1-port) converter now disconnected from ttyUSB3 |
| [23788.072994] option 2-1.4:2.5: device disconnected |
| [23788.073162] option1 ttyUSB4: GSM modem (1-port) converter now disconnected from ttyUSB4 |
| [23788.073183] option 2-1.4:2.6: device disconnected |
| [23788.073467] udevd[20774]: error opening ATTR{/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/host6/scsi_host/host6/link_power_management_policy} for writing: Permission denied |
| [23788.145153] usb 1-1.5: New USB device found, idVendor=17ef, idProduct=1005, bcdDevice= 0.01 |
| [23788.145160] usb 1-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [23788.145562] hub 1-1.5:1.0: USB hub found |
| [23788.145718] hub 1-1.5:1.0: 4 ports detected |
| [23789.132216] scsi 6:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS |
| [23789.132439] sd 6:0:0:0: Attached scsi generic sg1 type 0 |
| [23789.541655] usb 2-1.4: new high-speed USB device number 10 using ehci-pci |
| [23789.622020] usb 2-1.4: New USB device found, idVendor=12d1, idProduct=15c1, bcdDevice= 1.02 |
| [23789.622026] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [23789.622029] usb 2-1.4: Product: HUAWEI Mobile V7R11 |
| [23789.622032] usb 2-1.4: Manufacturer: Huawei Technologies Co., Ltd. |
| [23789.622034] usb 2-1.4: SerialNumber: 0123456789ABCDEF |
| [23789.624710] option 2-1.4:2.2: GSM modem (1-port) converter detected |
| [23789.624827] usb 2-1.4: GSM modem (1-port) converter now attached to ttyUSB0 |
| [23789.625214] option 2-1.4:2.3: GSM modem (1-port) converter detected |
| [23789.625321] usb 2-1.4: GSM modem (1-port) converter now attached to ttyUSB1 |
| [23789.625690] option 2-1.4:2.4: GSM modem (1-port) converter detected |
| [23789.625786] usb 2-1.4: GSM modem (1-port) converter now attached to ttyUSB2 |
| [23789.626033] option 2-1.4:2.5: GSM modem (1-port) converter detected |
| [23789.626105] usb 2-1.4: GSM modem (1-port) converter now attached to ttyUSB3 |
| [23789.626402] option 2-1.4:2.6: GSM modem (1-port) converter detected |
| [23789.626478] usb 2-1.4: GSM modem (1-port) converter now attached to ttyUSB4 |
| [23790.354854] wlan0: authenticate with 04:f0:21:3b:fc:7a |
| [23790.375950] wlan0: send auth to 04:f0:21:3b:fc:7a (try 1/3) |
| [23790.377822] wlan0: authenticated |
| [23790.378575] wlan0: associate with 04:f0:21:3b:fc:7a (try 1/3) |
| [23790.380321] wlan0: RX AssocResp from 04:f0:21:3b:fc:7a (capab=0x11 status=0 aid=1) |
| [23790.380533] wlan0: associated |
| [23790.970053] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx |
| [23791.893858] wlan0: deauthenticating from 04:f0:21:3b:fc:7a by local choice (Reason: 3=DEAUTH_LEAVING) |
| [23796.235857] sd 6:0:0:0: [sdb] Attached SCSI removable disk |
| [23799.864275] usb 2-1.1: USB disconnect, device number 9 |
| [23799.874180] udevd[20776]: inotify_add_watch(7, /dev/sdb, 10) failed: No such file or directory |
| [23799.876556] udevd[20774]: inotify_add_watch(7, /dev/sdb, 10) failed: No such file or directory |
| [23799.884986] udevd[20776]: error opening ATTR{/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/host6/scsi_host/host6/link_power_management_policy} for writing: No such file or directory |
| [23801.824376] ACPI: \_SB_.DOCK: undocking |
| [23801.826026] ACPI: \_SB_.DOCK: No _EJ0 support for device |
| [23802.057904] usb 1-1.5: USB disconnect, device number 5 |
| [23802.327921] PM: suspend entry (deep) |
| [23802.348236] Filesystems sync: 0.020 seconds |
| [23802.348427] Freezing user space processes ... (elapsed 0.001 seconds) done. |
| [23802.349624] OOM killer disabled. |
| [23802.349626] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done. |
| [23802.350634] printk: Suspending console(s) (use no_console_suspend to debug) |
| [23802.521632] sd 0:0:0:0: [sda] Synchronizing SCSI cache |
| [23802.524600] sd 0:0:0:0: [sda] Stopping disk |
| [23802.575474] e1000e: EEE TX LPI TIMER: 00000000 |
| [23803.169049] ACPI: EC: interrupt blocked |
| [23803.192694] ACPI: Preparing to enter system sleep state S3 |
| [23803.203914] ACPI: EC: event blocked |
| [23803.203915] ACPI: EC: EC stopped |
| [23803.203916] PM: Saving platform NVS memory |
| [23803.203918] Disabling non-boot CPUs ... |
| [23803.205378] smpboot: CPU 1 is now offline |
| [23803.207282] smpboot: CPU 2 is now offline |
| [23803.208966] smpboot: CPU 3 is now offline |
| [23803.209842] ACPI: Low-level resume complete |
| [23803.209886] ACPI: EC: EC started |
| [23803.209887] PM: Restoring platform NVS memory |
| [23803.210214] Enabling non-boot CPUs ... |
| [23803.210249] x86: Booting SMP configuration: |
| [23803.210250] smpboot: Booting Node 0 Processor 1 APIC 0x1 |
| [23803.213086] CPU1 is up |
| [23803.213107] smpboot: Booting Node 0 Processor 2 APIC 0x4 |
| [23803.215830] CPU2 is up |
| [23803.215851] smpboot: Booting Node 0 Processor 3 APIC 0x5 |
| [23803.218598] CPU3 is up |
| [23803.220323] ACPI: Waking up from system sleep state S3 |
| [23803.229163] ACPI: EC: interrupt unblocked |
| [23803.229167] pci 0000:00:16.0: Refused to change power state, currently in D3 |
| [23803.254846] ACPI: EC: event unblocked |
| [23803.255614] sd 0:0:0:0: [sda] Starting disk |
| [23803.560296] ata2: SATA link down (SStatus 0 SControl 300) |
| [23803.663574] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) |
| [23803.663852] ata1.00: supports DRM functions and may not be fully accessible |
| [23803.664333] ata1.00: NCQ Send/Recv Log not supported |
| [23803.665250] ata1.00: supports DRM functions and may not be fully accessible |
| [23803.665729] ata1.00: NCQ Send/Recv Log not supported |
| [23803.666264] ata1.00: configured for UDMA/133 |
| [23804.001387] psmouse serio1: synaptics: queried max coordinates: x [..5888], y [..4810] |
| [23805.612637] OOM killer enabled. |
| [23805.612639] Restarting tasks ... done. |
| [23805.640748] video LNXVIDEO:00: Restoring backlight state |
| [23805.643940] PM: suspend exit |
| [23805.680465] usb 2-1.1: new high-speed USB device number 11 using ehci-pci |
| [23805.771620] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=0159, bcdDevice=58.88 |
| [23805.771625] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [23805.771627] usb 2-1.1: Product: USB2.0-CRW |
| [23805.771629] usb 2-1.1: Manufacturer: Generic |
| [23805.771630] usb 2-1.1: SerialNumber: 20071114173400000 |
| [23805.776331] usb-storage 2-1.1:1.0: USB Mass Storage device detected |
| [23805.776461] scsi host6: usb-storage 2-1.1:1.0 |
| [23805.776867] usb 2-1.4: USB disconnect, device number 10 |
| [23805.777157] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 |
| [23805.777177] option 2-1.4:2.2: device disconnected |
| [23805.777440] udevd[20774]: error opening ATTR{/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/host6/scsi_host/host6/link_power_management_policy} for writing: Permission denied |
| [23805.777479] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 |
| [23805.777493] option 2-1.4:2.3: device disconnected |
| [23805.777622] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2 |
| [23805.777637] option 2-1.4:2.4: device disconnected |
| [23805.777758] option1 ttyUSB3: GSM modem (1-port) converter now disconnected from ttyUSB3 |
| [23805.777768] option 2-1.4:2.5: device disconnected |
| [23805.777862] option1 ttyUSB4: GSM modem (1-port) converter now disconnected from ttyUSB4 |
| [23805.777872] option 2-1.4:2.6: device disconnected |
| [23806.797162] scsi 6:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS |
| [23806.797588] sd 6:0:0:0: Attached scsi generic sg1 type 0 |
| [23807.269515] usb 2-1.4: new high-speed USB device number 12 using ehci-pci |
| [23807.350178] usb 2-1.4: New USB device found, idVendor=12d1, idProduct=15c1, bcdDevice= 1.02 |
| [23807.350182] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [23807.350185] usb 2-1.4: Product: HUAWEI Mobile V7R11 |
| [23807.350187] usb 2-1.4: Manufacturer: Huawei Technologies Co., Ltd. |
| [23807.350190] usb 2-1.4: SerialNumber: 0123456789ABCDEF |
| [23807.352867] option 2-1.4:2.2: GSM modem (1-port) converter detected |
| [23807.352992] usb 2-1.4: GSM modem (1-port) converter now attached to ttyUSB0 |
| [23807.353382] option 2-1.4:2.3: GSM modem (1-port) converter detected |
| [23807.353508] usb 2-1.4: GSM modem (1-port) converter now attached to ttyUSB1 |
| [23807.353868] option 2-1.4:2.4: GSM modem (1-port) converter detected |
| [23807.353972] usb 2-1.4: GSM modem (1-port) converter now attached to ttyUSB2 |
| [23807.354237] option 2-1.4:2.5: GSM modem (1-port) converter detected |
| [23807.354336] usb 2-1.4: GSM modem (1-port) converter now attached to ttyUSB3 |
| [23807.354582] option 2-1.4:2.6: GSM modem (1-port) converter detected |
| [23807.354671] usb 2-1.4: GSM modem (1-port) converter now attached to ttyUSB4 |
| [23808.091320] wlan0: authenticate with 04:f0:21:3b:fc:7a |
| [23808.112790] wlan0: send auth to 04:f0:21:3b:fc:7a (try 1/3) |
| [23808.114650] wlan0: authenticated |
| [23808.115488] wlan0: associate with 04:f0:21:3b:fc:7a (try 1/3) |
| [23808.117176] wlan0: RX AssocResp from 04:f0:21:3b:fc:7a (capab=0x11 status=0 aid=1) |
| [23808.117357] wlan0: associated |
| [23813.895215] sd 6:0:0:0: [sdb] Attached SCSI removable disk |
| [23818.115714] usb 2-1.1: USB disconnect, device number 11 |
| [23818.125197] udevd[20776]: inotify_add_watch(7, /dev/sdb, 10) failed: No such file or directory |
| [23818.127610] udevd[20775]: inotify_add_watch(7, /dev/sdb, 10) failed: No such file or directory |
| [23818.136817] udevd[20776]: error opening ATTR{/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/host6/scsi_host/host6/link_power_management_policy} for writing: No such file or directory |
| [26648.165270] ACPI: \_SB_.DOCK: undocking |
| [26648.166676] ACPI: \_SB_.DOCK: No _EJ0 support for device |
| [26648.668518] PM: suspend entry (deep) |
| [26648.680001] Filesystems sync: 0.011 seconds |
| [26648.680193] Freezing user space processes ... (elapsed 0.001 seconds) done. |
| [26648.681621] OOM killer disabled. |
| [26648.681624] Freezing remaining freezable tasks ... |
| [26648.682640] (elapsed 0.001 seconds) done. |
| [26648.682661] printk: Suspending console(s) (use no_console_suspend to debug) |
| [26648.854585] sd 0:0:0:0: [sda] Synchronizing SCSI cache |
| [26648.855824] sd 0:0:0:0: [sda] Stopping disk |
| [26648.897573] wlan0: deauthenticating from 04:f0:21:3b:fc:7a by local choice (Reason: 3=DEAUTH_LEAVING) |
| [26648.898116] e1000e: EEE TX LPI TIMER: 00000000 |
| [26649.480064] ACPI: EC: interrupt blocked |
| [26649.503696] ACPI: Preparing to enter system sleep state S3 |
| [26649.514901] ACPI: EC: event blocked |
| [26649.514902] ACPI: EC: EC stopped |
| [26649.514903] PM: Saving platform NVS memory |
| [26649.514904] Disabling non-boot CPUs ... |
| [26649.516259] smpboot: CPU 1 is now offline |
| [26649.518010] smpboot: CPU 2 is now offline |
| [26649.519788] smpboot: CPU 3 is now offline |
| [26649.520751] ACPI: Low-level resume complete |
| [26649.520796] ACPI: EC: EC started |
| [26649.520797] PM: Restoring platform NVS memory |
| [26649.521134] Enabling non-boot CPUs ... |
| [26649.521176] x86: Booting SMP configuration: |
| [26649.521177] smpboot: Booting Node 0 Processor 1 APIC 0x1 |
| [26649.523830] CPU1 is up |
| [26649.523852] smpboot: Booting Node 0 Processor 2 APIC 0x4 |
| [26649.526567] CPU2 is up |
| [26649.526588] smpboot: Booting Node 0 Processor 3 APIC 0x5 |
| [26649.529307] CPU3 is up |
| [26649.531016] ACPI: Waking up from system sleep state S3 |
| [26649.540323] ACPI: EC: interrupt unblocked |
| [26649.540330] pci 0000:00:16.0: Refused to change power state, currently in D3 |
| [26649.565956] ACPI: EC: event unblocked |
| [26649.566579] sd 0:0:0:0: [sda] Starting disk |
| [26649.873471] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) |
| [26649.977491] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) |
| [26649.977742] ata1.00: supports DRM functions and may not be fully accessible |
| [26649.978153] ata1.00: NCQ Send/Recv Log not supported |
| [26649.979075] ata1.00: supports DRM functions and may not be fully accessible |
| [26649.979539] ata1.00: NCQ Send/Recv Log not supported |
| [26649.980076] ata1.00: configured for UDMA/133 |
| [26650.346167] psmouse serio1: synaptics: queried max coordinates: x [..5888], y [..4810] |
| [26651.925911] OOM killer enabled. |
| [26651.925913] Restarting tasks ... done. |
| [26651.950000] video LNXVIDEO:00: Restoring backlight state |
| [26651.952530] PM: suspend exit |
| [26651.991497] usb 2-1.1: new high-speed USB device number 13 using ehci-pci |
| [26652.081647] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=0159, bcdDevice=58.88 |
| [26652.081654] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [26652.081656] usb 2-1.1: Product: USB2.0-CRW |
| [26652.081658] usb 2-1.1: Manufacturer: Generic |
| [26652.081660] usb 2-1.1: SerialNumber: 20071114173400000 |
| [26652.086564] usb-storage 2-1.1:1.0: USB Mass Storage device detected |
| [26652.086768] scsi host6: usb-storage 2-1.1:1.0 |
| [26652.087270] usb 2-1.4: USB disconnect, device number 12 |
| [26652.087630] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 |
| [26652.087661] option 2-1.4:2.2: device disconnected |
| [26652.087865] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 |
| [26652.087881] option 2-1.4:2.3: device disconnected |
| [26652.088018] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2 |
| [26652.088035] option 2-1.4:2.4: device disconnected |
| [26652.088168] option1 ttyUSB3: GSM modem (1-port) converter now disconnected from ttyUSB3 |
| [26652.088185] option 2-1.4:2.5: device disconnected |
| [26652.088351] option1 ttyUSB4: GSM modem (1-port) converter now disconnected from ttyUSB4 |
| [26652.088376] option 2-1.4:2.6: device disconnected |
| [26652.088632] udevd[26602]: error opening ATTR{/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/host6/scsi_host/host6/link_power_management_policy} for writing: Permission denied |
| [26652.100501] usb 1-1.5: new high-speed USB device number 6 using ehci-pci |
| [26652.179247] usb 1-1.5: New USB device found, idVendor=17ef, idProduct=1005, bcdDevice= 0.01 |
| [26652.179252] usb 1-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [26652.179595] hub 1-1.5:1.0: USB hub found |
| [26652.179778] hub 1-1.5:1.0: 4 ports detected |
| [26653.080031] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx |
| [26653.134285] scsi 6:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS |
| [26653.134575] sd 6:0:0:0: Attached scsi generic sg1 type 0 |
| [26653.580520] usb 2-1.4: new high-speed USB device number 14 using ehci-pci |
| [26653.660909] usb 2-1.4: New USB device found, idVendor=12d1, idProduct=15c1, bcdDevice= 1.02 |
| [26653.660915] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [26653.660918] usb 2-1.4: Product: HUAWEI Mobile V7R11 |
| [26653.660921] usb 2-1.4: Manufacturer: Huawei Technologies Co., Ltd. |
| [26653.660923] usb 2-1.4: SerialNumber: 0123456789ABCDEF |
| [26653.663634] option 2-1.4:2.2: GSM modem (1-port) converter detected |
| [26653.663753] usb 2-1.4: GSM modem (1-port) converter now attached to ttyUSB0 |
| [26653.664136] option 2-1.4:2.3: GSM modem (1-port) converter detected |
| [26653.664239] usb 2-1.4: GSM modem (1-port) converter now attached to ttyUSB1 |
| [26653.664416] option 2-1.4:2.4: GSM modem (1-port) converter detected |
| [26653.664493] usb 2-1.4: GSM modem (1-port) converter now attached to ttyUSB2 |
| [26653.664893] option 2-1.4:2.5: GSM modem (1-port) converter detected |
| [26653.664995] usb 2-1.4: GSM modem (1-port) converter now attached to ttyUSB3 |
| [26653.665230] option 2-1.4:2.6: GSM modem (1-port) converter detected |
| [26653.665284] usb 2-1.4: GSM modem (1-port) converter now attached to ttyUSB4 |
| [26660.235148] sd 6:0:0:0: [sdb] Attached SCSI removable disk |
| [26663.863730] usb 2-1.1: USB disconnect, device number 13 |
| [26663.873367] udevd[26694]: inotify_add_watch(7, /dev/sdb, 10) failed: No such file or directory |
| [26663.876766] udevd[26708]: inotify_add_watch(7, /dev/sdb, 10) failed: No such file or directory |
| [26663.890878] udevd[26708]: error opening ATTR{/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/host6/scsi_host/host6/link_power_management_policy} for writing: No such file or directory |
| [56257.532594] ACPI: \_SB_.DOCK: undocking |
| [56257.534136] ACPI: \_SB_.DOCK: No _EJ0 support for device |
| [56257.764849] usb 1-1.5: USB disconnect, device number 6 |
| [56259.552028] e1000e: eth0 NIC Link is Down |
| [56262.469236] wlan0: authenticate with 04:f0:21:3b:fc:7a |
| [56262.490955] wlan0: send auth to 04:f0:21:3b:fc:7a (try 1/3) |
| [56262.492836] wlan0: authenticated |
| [56262.493464] wlan0: associate with 04:f0:21:3b:fc:7a (try 1/3) |
| [56262.495503] wlan0: RX AssocResp from 04:f0:21:3b:fc:7a (capab=0x11 status=0 aid=1) |
| [56262.495689] wlan0: associated |