| [ 0.000000] Linux version 5.3.0-3-amd64 (debian-kernel@lists.debian.org) (gcc version 9.2.1 20191130 (Debian 9.2.1-21)) #1 SMP Debian 5.3.15-1 (2019-12-07) |
| [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-5.3.0-3-amd64 root=UUID=fecd1560-5f5f-4264-ad98-606e63141621 ro rootflags=subvol=@ quiet iomem=relaxed |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' |
| [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 |
| [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. |
| [ 0.000000] BIOS-provided physical RAM map: |
| [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff20fff] usable |
| [ 0.000000] BIOS-e820: [mem 0x00000000bff21000-0x00000000c29fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023d5fffff] usable |
| [ 0.000000] NX (Execute Disable) protection: active |
| [ 0.000000] SMBIOS 2.8 present. |
| [ 0.000000] DMI: LENOVO 346034U/346034U, BIOS CBET4000 4.11-556-g95bff2e17e 12/22/2019 |
| [ 0.000000] tsc: Fast TSC calibration using PIT |
| [ 0.000000] tsc: Detected 1795.819 MHz processor |
| [ 0.001620] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| [ 0.001622] e820: remove [mem 0x000a0000-0x000fffff] usable |
| [ 0.001627] last_pfn = 0x23d600 max_arch_pfn = 0x400000000 |
| [ 0.001633] MTRR default type: write-back |
| [ 0.001634] MTRR fixed ranges enabled: |
| [ 0.001636] 00000-9FFFF write-back |
| [ 0.001637] A0000-BFFFF uncachable |
| [ 0.001638] C0000-FFFFF write-back |
| [ 0.001639] MTRR variable ranges enabled: |
| [ 0.001641] 0 base 0C0000000 mask FF0000000 uncachable |
| [ 0.001643] 1 base 0D0000000 mask FF0000000 write-combining |
| [ 0.001644] 2 base 0E0000000 mask FE0000000 uncachable |
| [ 0.001644] 3 disabled |
| [ 0.001645] 4 disabled |
| [ 0.001646] 5 disabled |
| [ 0.001646] 6 disabled |
| [ 0.001647] 7 disabled |
| [ 0.001648] 8 disabled |
| [ 0.001648] 9 disabled |
| [ 0.002022] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT |
| [ 0.002167] last_pfn = 0xbff21 max_arch_pfn = 0x400000000 |
| [ 0.017232] BRK [0x179001000, 0x179001fff] PGTABLE |
| [ 0.017236] BRK [0x179002000, 0x179002fff] PGTABLE |
| [ 0.017237] BRK [0x179003000, 0x179003fff] PGTABLE |
| [ 0.017263] BRK [0x179004000, 0x179004fff] PGTABLE |
| [ 0.017265] BRK [0x179005000, 0x179005fff] PGTABLE |
| [ 0.017338] BRK [0x179006000, 0x179006fff] PGTABLE |
| [ 0.017357] BRK [0x179007000, 0x179007fff] PGTABLE |
| [ 0.017378] BRK [0x179008000, 0x179008fff] PGTABLE |
| [ 0.017479] RAMDISK: [mem 0x31555000-0x34aa1fff] |
| [ 0.017486] ACPI: Early table checksum verification disabled |
| [ 0.017490] ACPI: RSDP 0x00000000000F6750 000024 (v02 COREv4) |
| [ 0.017495] ACPI: XSDT 0x00000000BFF450E0 00005C (v01 COREv4 COREBOOT 00000000 CORE 20190703) |
| [ 0.017502] ACPI: FACP 0x00000000BFF48C40 0000F4 (v04 COREv4 COREBOOT 00000000 CORE 20190703) |
| [ 0.017509] ACPI: DSDT 0x00000000BFF45280 0039C0 (v02 COREv4 COREBOOT 20141018 INTL 20190703) |
| [ 0.017513] ACPI: FACS 0x00000000BFF45240 000040 |
| [ 0.017516] ACPI: FACS 0x00000000BFF45240 000040 |
| [ 0.017519] ACPI: SSDT 0x00000000BFF48D40 001A17 (v02 COREv4 COREBOOT 0000002A CORE 20190703) |
| [ 0.017523] ACPI: MCFG 0x00000000BFF4A760 00003C (v01 COREv4 COREBOOT 00000000 CORE 20190703) |
| [ 0.017526] ACPI: TCPA 0x00000000BFF4A7A0 000032 (v02 COREv4 COREBOOT 00000000 CORE 20190703) |
| [ 0.017530] ACPI: APIC 0x00000000BFF4A7E0 00006C (v02 COREv4 COREBOOT 00000000 CORE 20190703) |
| [ 0.017533] ACPI: DMAR 0x00000000BFF4A850 0000D0 (v01 COREv4 COREBOOT 00000000 CORE 20190703) |
| [ 0.017537] ACPI: HPET 0x00000000BFF4C920 000038 (v01 COREv4 COREBOOT 00000000 CORE 20190703) |
| [ 0.017547] ACPI: Local APIC address 0xfee00000 |
| [ 0.017656] No NUMA configuration found |
| [ 0.017657] Faking a node at [mem 0x0000000000000000-0x000000023d5fffff] |
| [ 0.017662] NODE_DATA(0) allocated [mem 0x23d5f7000-0x23d5fbfff] |
| [ 0.017698] Zone ranges: |
| [ 0.017699] DMA [mem 0x0000000000001000-0x0000000000ffffff] |
| [ 0.017701] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] |
| [ 0.017702] Normal [mem 0x0000000100000000-0x000000023d5fffff] |
| [ 0.017703] Device empty |
| [ 0.017704] Movable zone start for each node |
| [ 0.017705] Early memory node ranges |
| [ 0.017706] node 0: [mem 0x0000000000001000-0x000000000009efff] |
| [ 0.017708] node 0: [mem 0x0000000000100000-0x00000000bff20fff] |
| [ 0.017709] node 0: [mem 0x0000000100000000-0x000000023d5fffff] |
| [ 0.017720] Zeroed struct page in unavailable ranges: 321 pages |
| [ 0.017721] Initmem setup node 0 [mem 0x0000000000001000-0x000000023d5fffff] |
| [ 0.017723] On node 0 totalpages: 2086079 |
| [ 0.017725] DMA zone: 64 pages used for memmap |
| [ 0.017725] DMA zone: 21 pages reserved |
| [ 0.017727] DMA zone: 3998 pages, LIFO batch:0 |
| [ 0.017808] DMA32 zone: 12221 pages used for memmap |
| [ 0.017809] DMA32 zone: 782113 pages, LIFO batch:63 |
| [ 0.034160] Normal zone: 20312 pages used for memmap |
| [ 0.034162] Normal zone: 1299968 pages, LIFO batch:63 |
| [ 0.058104] Reserving Intel graphics memory at [mem 0xc0a00000-0xc29fffff] |
| [ 0.058325] ACPI: PM-Timer IO Port: 0x508 |
| [ 0.058328] ACPI: Local APIC address 0xfee00000 |
| [ 0.058348] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 |
| [ 0.058350] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) |
| [ 0.058353] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) |
| [ 0.058355] ACPI: IRQ0 used by override. |
| [ 0.058357] ACPI: IRQ9 used by override. |
| [ 0.058359] Using ACPI (MADT) for SMP configuration information |
| [ 0.058361] ACPI: HPET id: 0x8086a701 base: 0xfed00000 |
| [ 0.058367] smpboot: Allowing 4 CPUs, 0 hotplug CPUs |
| [ 0.058381] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] |
| [ 0.058383] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] |
| [ 0.058384] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] |
| [ 0.058385] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] |
| [ 0.058386] PM: Registered nosave memory: [mem 0xbff21000-0xc29fffff] |
| [ 0.058387] PM: Registered nosave memory: [mem 0xc2a00000-0xefffffff] |
| [ 0.058388] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff] |
| [ 0.058388] PM: Registered nosave memory: [mem 0xf4000000-0xfed3ffff] |
| [ 0.058389] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff] |
| [ 0.058390] PM: Registered nosave memory: [mem 0xfed45000-0xfed8ffff] |
| [ 0.058391] PM: Registered nosave memory: [mem 0xfed90000-0xfed91fff] |
| [ 0.058391] PM: Registered nosave memory: [mem 0xfed92000-0xffffffff] |
| [ 0.058394] [mem 0xc2a00000-0xefffffff] available for PCI devices |
| [ 0.058395] Booting paravirtualized kernel on bare hardware |
| [ 0.058398] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns |
| [ 0.194639] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 |
| [ 0.194902] percpu: Embedded 53 pages/cpu s178200 r8192 d30696 u524288 |
| [ 0.194909] pcpu-alloc: s178200 r8192 d30696 u524288 alloc=1*2097152 |
| [ 0.194910] pcpu-alloc: [0] 0 1 2 3 |
| [ 0.194939] Built 1 zonelists, mobility grouping on. Total pages: 2053461 |
| [ 0.194940] Policy zone: Normal |
| [ 0.194941] Kernel command line: BOOT_IMAGE=/vmlinuz-5.3.0-3-amd64 root=UUID=fecd1560-5f5f-4264-ad98-606e63141621 ro rootflags=subvol=@ quiet iomem=relaxed |
| [ 0.195623] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) |
| [ 0.195925] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) |
| [ 0.195994] mem auto-init: stack:off, heap alloc:off, heap free:off |
| [ 0.200956] Calgary: detecting Calgary via BIOS EBDA area |
| [ 0.200963] Calgary: Unable to locate Rio Grande table in EBDA - bailing! |
| [ 0.228692] Memory: 8054716K/8344316K available (10243K kernel code, 1197K rwdata, 3556K rodata, 1660K init, 2096K bss, 289600K reserved, 0K cma-reserved) |
| [ 0.228854] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 |
| [ 0.228869] Kernel/User page tables isolation: enabled |
| [ 0.228887] ftrace: allocating 33172 entries in 130 pages |
| [ 0.247276] rcu: Hierarchical RCU implementation. |
| [ 0.247277] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4. |
| [ 0.247279] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. |
| [ 0.247280] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 |
| [ 0.252107] NR_IRQS: 33024, nr_irqs: 456, preallocated irqs: 16 |
| [ 0.252350] random: crng done (trusting CPU's manufacturer) |
| [ 0.252697] Console: colour dummy device 80x25 |
| [ 0.252702] printk: console [tty0] enabled |
| [ 0.252725] ACPI: Core revision 20190703 |
| [ 0.252818] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns |
| [ 0.252836] APIC: Switch to symmetric I/O mode setup |
| [ 0.252838] DMAR: Host address width 36 |
| [ 0.252839] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 |
| [ 0.252846] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a |
| [ 0.252847] DMAR: RMRR base: 0x000000c0800000 end: 0x000000c29fffff |
| [ 0.252848] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 |
| [ 0.252852] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a |
| [ 0.252854] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 |
| [ 0.252855] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 |
| [ 0.252856] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. |
| [ 0.253404] DMAR-IR: Enabled IRQ remapping in x2apic mode |
| [ 0.253407] x2apic enabled |
| [ 0.253415] Switched APIC routing to cluster x2apic. |
| [ 0.253886] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 |
| [ 0.272838] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x19e2bbe736e, max_idle_ns: 440795236513 ns |
| [ 0.272844] Calibrating delay loop (skipped), value calculated using timer frequency.. 3591.63 BogoMIPS (lpj=7183276) |
| [ 0.272847] pid_max: default: 32768 minimum: 301 |
| [ 0.272886] LSM: Security Framework initializing |
| [ 0.272892] Yama: disabled by default; enable with sysctl kernel.yama.* |
| [ 0.272919] AppArmor: AppArmor initialized |
| [ 0.272921] TOMOYO Linux initialized |
| [ 0.272958] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) |
| [ 0.272978] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) |
| [ 0.273314] mce: CPU0: Thermal monitoring enabled (TM1) |
| [ 0.273327] process: using mwait in idle threads |
| [ 0.273331] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 |
| [ 0.273332] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 |
| [ 0.273335] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization |
| [ 0.273337] Spectre V2 : Mitigation: Full generic retpoline |
| [ 0.273338] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch |
| [ 0.273339] Spectre V2 : Enabling Restricted Speculation for firmware calls |
| [ 0.273341] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier |
| [ 0.273341] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl |
| [ 0.273343] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp |
| [ 0.273347] MDS: Mitigation: Clear CPU buffers |
| [ 0.273581] Freeing SMP alternatives memory: 24K |
| [ 0.275968] TSC deadline timer enabled |
| [ 0.275972] smpboot: CPU0: Intel(R) Core(TM) i5-3427U CPU @ 1.80GHz (family: 0x6, model: 0x3a, stepping: 0x9) |
| [ 0.276127] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. |
| [ 0.276136] ... version: 3 |
| [ 0.276136] ... bit width: 48 |
| [ 0.276137] ... generic registers: 4 |
| [ 0.276138] ... value mask: 0000ffffffffffff |
| [ 0.276139] ... max period: 00007fffffffffff |
| [ 0.276139] ... fixed-purpose events: 3 |
| [ 0.276140] ... event mask: 000000070000000f |
| [ 0.276189] rcu: Hierarchical SRCU implementation. |
| [ 0.276840] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. |
| [ 0.276840] smp: Bringing up secondary CPUs ... |
| [ 0.276840] x86: Booting SMP configuration: |
| [ 0.276840] .... node #0, CPUs: #1 |
| [ 0.276968] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. |
| [ 0.277022] #2 #3 |
| [ 0.283839] smp: Brought up 1 node, 4 CPUs |
| [ 0.283839] smpboot: Max logical packages: 1 |
| [ 0.283839] smpboot: Total of 4 processors activated (14366.55 BogoMIPS) |
| [ 0.285121] devtmpfs: initialized |
| [ 0.285121] x86/mm: Memory block size: 128MB |
| [ 0.285931] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns |
| [ 0.285931] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) |
| [ 0.285931] pinctrl core: initialized pinctrl subsystem |
| [ 0.285931] NET: Registered protocol family 16 |
| [ 0.285931] audit: initializing netlink subsys (disabled) |
| [ 0.285931] audit: type=2000 audit(1577137685.032:1): state=initialized audit_enabled=0 res=1 |
| [ 0.285931] cpuidle: using governor ladder |
| [ 0.285931] cpuidle: using governor menu |
| [ 0.285931] ACPI: bus type PCI registered |
| [ 0.285931] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 |
| [ 0.285931] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) |
| [ 0.285931] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 |
| [ 0.285931] PCI: Using configuration type 1 for base access |
| [ 0.285931] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on |
| [ 0.288885] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages |
| [ 0.525140] alg: No test for lzo-rle (lzo-rle-generic) |
| [ 0.525140] alg: No test for lzo-rle (lzo-rle-scomp) |
| [ 0.525140] ACPI: Added _OSI(Module Device) |
| [ 0.525140] ACPI: Added _OSI(Processor Device) |
| [ 0.525140] ACPI: Added _OSI(3.0 _SCP Extensions) |
| [ 0.525140] ACPI: Added _OSI(Processor Aggregator Device) |
| [ 0.525140] ACPI: Added _OSI(Linux-Dell-Video) |
| [ 0.525140] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) |
| [ 0.525140] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) |
| [ 0.525795] ACPI: 2 ACPI AML tables successfully acquired and loaded |
| [ 0.526857] ACPI: EC: EC started |
| [ 0.526858] ACPI: EC: interrupt blocked |
| [ 0.527187] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC |
| [ 0.527189] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62 |
| [ 0.527190] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC used to handle transactions |
| [ 0.527191] ACPI: Interpreter enabled |
| [ 0.527215] ACPI: (supports S0 S3 S4 S5) |
| [ 0.527216] ACPI: Using IOAPIC for interrupt routing |
| [ 0.527240] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| [ 0.531888] ACPI: Power Resource [FPWR] (off) |
| [ 0.532283] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) |
| [ 0.532288] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] |
| [ 0.532349] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] |
| [ 0.532360] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge |
| [ 0.532424] acpi PNP0A08:00: ignoring host bridge window [mem 0x000c4000-0x000c7fff window] (conflicts with Video ROM [mem 0x000c0000-0x000c6dff]) |
| [ 0.532619] PCI host bridge to bus 0000:00 |
| [ 0.532622] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] |
| [ 0.532623] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] |
| [ 0.532625] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] |
| [ 0.532626] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] |
| [ 0.532628] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] |
| [ 0.532629] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window] |
| [ 0.532630] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] |
| [ 0.532632] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] |
| [ 0.532633] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] |
| [ 0.532634] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] |
| [ 0.532636] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] |
| [ 0.532637] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] |
| [ 0.532639] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window] |
| [ 0.532640] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window] |
| [ 0.532641] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window] |
| [ 0.532643] pci_bus 0000:00: root bus resource [mem 0xc2a00001-0xefffffff window] |
| [ 0.532644] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] |
| [ 0.532646] pci_bus 0000:00: root bus resource [bus 00-ff] |
| [ 0.532658] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000 |
| [ 0.532775] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000 |
| [ 0.532790] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe03fffff 64bit] |
| [ 0.532797] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref] |
| [ 0.532803] pci 0000:00:02.0: reg 0x20: [io 0x1800-0x183f] |
| [ 0.536848] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000 |
| [ 0.536848] pci 0000:00:04.0: reg 0x10: [mem 0xe0610000-0xe0617fff 64bit] |
| [ 0.536848] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330 |
| [ 0.536848] pci 0000:00:14.0: reg 0x10: [mem 0xe0600000-0xe060ffff 64bit] |
| [ 0.536848] pci 0000:00:14.0: PME# supported from D3hot D3cold |
| [ 0.536848] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000 |
| [ 0.536848] pci 0000:00:16.0: reg 0x10: [mem 0xe0621000-0xe062100f 64bit] |
| [ 0.536848] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold |
| [ 0.536848] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 |
| [ 0.536848] pci 0000:00:1a.0: reg 0x10: [mem 0xe061e000-0xe061e3ff] |
| [ 0.536848] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold |
| [ 0.536848] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300 |
| [ 0.536848] pci 0000:00:1b.0: reg 0x10: [mem 0xe0618000-0xe061bfff 64bit] |
| [ 0.536848] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold |
| [ 0.536848] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400 |
| [ 0.536848] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold |
| [ 0.536848] pci 0000:00:1c.0: Enabling MPC IRBNCE |
| [ 0.536848] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled |
| [ 0.536848] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400 |
| [ 0.536848] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold |
| [ 0.536848] pci 0000:00:1c.1: Enabling MPC IRBNCE |
| [ 0.536848] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled |
| [ 0.536848] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 |
| [ 0.536848] pci 0000:00:1d.0: reg 0x10: [mem 0xe061f000-0xe061f3ff] |
| [ 0.536848] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold |
| [ 0.536848] pci 0000:00:1f.0: [8086:1e56] type 00 class 0x060100 |
| [ 0.536848] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601 |
| [ 0.536848] pci 0000:00:1f.2: reg 0x10: [io 0x1860-0x1867] |
| [ 0.536848] pci 0000:00:1f.2: reg 0x14: [io 0x1870-0x1873] |
| [ 0.536848] pci 0000:00:1f.2: reg 0x18: [io 0x1868-0x186f] |
| [ 0.536848] pci 0000:00:1f.2: reg 0x1c: [io 0x1874-0x1877] |
| [ 0.536848] pci 0000:00:1f.2: reg 0x20: [io 0x1840-0x185f] |
| [ 0.536848] pci 0000:00:1f.2: reg 0x24: [mem 0xe061d000-0xe061d7ff] |
| [ 0.536848] pci 0000:00:1f.2: PME# supported from D3hot |
| [ 0.536848] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500 |
| [ 0.536848] pci 0000:00:1f.3: reg 0x10: [mem 0xe0620000-0xe06200ff 64bit] |
| [ 0.536848] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f] |
| [ 0.536848] pci 0000:00:1f.6: [8086:1e24] type 00 class 0x118000 |
| [ 0.536848] pci 0000:00:1f.6: reg 0x10: [mem 0xe061c000-0xe061cfff 64bit] |
| [ 0.536848] pci 0000:01:00.0: [1180:e823] type 00 class 0x080501 |
| [ 0.536848] pci 0000:01:00.0: MMC controller base frequency changed to 50Mhz. |
| [ 0.536848] pci 0000:01:00.0: reg 0x10: [mem 0xe0400000-0xe04000ff] |
| [ 0.536848] pci 0000:01:00.0: supports D1 D2 |
| [ 0.536848] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.536848] pci 0000:00:1c.0: PCI bridge to [bus 01] |
| [ 0.536848] pci 0000:00:1c.0: bridge window [mem 0xe0400000-0xe04fffff] |
| [ 0.536848] pci 0000:02:00.0: [8086:0085] type 00 class 0x028000 |
| [ 0.540843] pci 0000:02:00.0: reg 0x10: [mem 0xe0500000-0xe0501fff 64bit] |
| [ 0.540843] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold |
| [ 0.540843] pci 0000:00:1c.1: PCI bridge to [bus 02] |
| [ 0.540843] pci 0000:00:1c.1: bridge window [mem 0xe0500000-0xe05fffff] |
| [ 0.540843] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.540843] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.540843] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.540843] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.540843] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.540843] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.540843] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.540843] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.540847] ACPI: EC: interrupt unblocked |
| [ 0.540847] ACPI: EC: event unblocked |
| [ 0.540847] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62 |
| [ 0.540847] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC used to handle transactions and events |
| [ 0.540854] pci 0000:00:02.0: vgaarb: setting as boot VGA device |
| [ 0.540854] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none |
| [ 0.540857] pci 0000:00:02.0: vgaarb: bridge control possible |
| [ 0.540859] vgaarb: loaded |
| [ 0.540946] EDAC MC: Ver: 3.0.0 |
| [ 0.541076] PCI: Using ACPI for IRQ routing |
| [ 0.542237] PCI: pci_cache_line_size set to 64 bytes |
| [ 0.542366] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] |
| [ 0.542368] e820: reserve RAM buffer [mem 0xbff21000-0xbfffffff] |
| [ 0.542369] e820: reserve RAM buffer [mem 0x23d600000-0x23fffffff] |
| [ 0.544846] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 |
| [ 0.544846] hpet0: 8 comparators, 64-bit 14.318180 MHz counter |
| [ 0.548897] clocksource: Switched to clocksource tsc-early |
| [ 0.563637] VFS: Disk quotas dquot_6.6.0 |
| [ 0.563660] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) |
| [ 0.563811] AppArmor: AppArmor Filesystem Enabled |
| [ 0.563835] pnp: PnP ACPI init |
| [ 0.564041] pnp 00:00: [Firmware Bug]: PNP resource [mem 0xf0000000-0x12fffffff] covers only part of 0000:00:00.0 Intel MCH; extending to [mem 0xfed10000-0xfed17fff] |
| [ 0.564076] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved |
| [ 0.564078] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved |
| [ 0.564080] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved |
| [ 0.564081] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved |
| [ 0.564083] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved |
| [ 0.564085] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved |
| [ 0.564086] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved |
| [ 0.564088] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved |
| [ 0.564090] system 00:00: [mem 0x20000000-0x201fffff] could not be reserved |
| [ 0.564092] system 00:00: [mem 0x40000000-0x401fffff] could not be reserved |
| [ 0.564099] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) |
| [ 0.564567] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved |
| [ 0.564572] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) |
| [ 0.564621] system 00:02: [io 0x0500-0x057f] has been reserved |
| [ 0.564622] system 00:02: [io 0x0480-0x04bf] has been reserved |
| [ 0.564627] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) |
| [ 0.564654] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) |
| [ 0.564690] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) |
| [ 0.564722] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active) |
| [ 0.564756] pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active) |
| [ 0.564780] pnp: PnP ACPI: found 7 devices |
| [ 0.566419] thermal_sys: Registered thermal governor 'fair_share' |
| [ 0.566420] thermal_sys: Registered thermal governor 'bang_bang' |
| [ 0.566421] thermal_sys: Registered thermal governor 'step_wise' |
| [ 0.566422] thermal_sys: Registered thermal governor 'user_space' |
| [ 0.570924] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns |
| [ 0.570973] pci 0000:00:1c.0: PCI bridge to [bus 01] |
| [ 0.570981] pci 0000:00:1c.0: bridge window [mem 0xe0400000-0xe04fffff] |
| [ 0.570993] pci 0000:00:1c.1: PCI bridge to [bus 02] |
| [ 0.571000] pci 0000:00:1c.1: bridge window [mem 0xe0500000-0xe05fffff] |
| [ 0.571013] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] |
| [ 0.571015] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] |
| [ 0.571017] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] |
| [ 0.571018] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] |
| [ 0.571019] pci_bus 0000:00: resource 8 [mem 0x000c8000-0x000cbfff window] |
| [ 0.571021] pci_bus 0000:00: resource 9 [mem 0x000cc000-0x000cffff window] |
| [ 0.571022] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window] |
| [ 0.571024] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window] |
| [ 0.571025] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window] |
| [ 0.571027] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window] |
| [ 0.571028] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window] |
| [ 0.571029] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window] |
| [ 0.571031] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window] |
| [ 0.571032] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window] |
| [ 0.571034] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff window] |
| [ 0.571035] pci_bus 0000:00: resource 19 [mem 0xc2a00001-0xefffffff window] |
| [ 0.571037] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed44fff window] |
| [ 0.571038] pci_bus 0000:01: resource 1 [mem 0xe0400000-0xe04fffff] |
| [ 0.571040] pci_bus 0000:02: resource 1 [mem 0xe0500000-0xe05fffff] |
| [ 0.571139] NET: Registered protocol family 2 |
| [ 0.571331] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) |
| [ 0.571345] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) |
| [ 0.571463] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) |
| [ 0.571613] TCP: Hash tables configured (established 65536 bind 65536) |
| [ 0.571648] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) |
| [ 0.571672] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) |
| [ 0.571743] NET: Registered protocol family 1 |
| [ 0.571750] NET: Registered protocol family 44 |
| [ 0.571762] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] |
| [ 0.572408] PCI: CLS 64 bytes, default 64 |
| [ 0.572460] Trying to unpack rootfs image as initramfs... |
| [ 1.661172] Freeing initrd memory: 54580K |
| [ 1.661328] DMAR: No ATSR found |
| [ 1.661371] DMAR: dmar0: Using Queued invalidation |
| [ 1.661378] DMAR: dmar1: Using Queued invalidation |
| [ 1.715671] pci 0000:00:00.0: Adding to iommu group 0 |
| [ 1.719957] pci 0000:00:02.0: Adding to iommu group 1 |
| [ 1.720380] pci 0000:00:02.0: Using iommu direct mapping |
| [ 1.720423] pci 0000:00:04.0: Adding to iommu group 2 |
| [ 1.720469] pci 0000:00:14.0: Adding to iommu group 3 |
| [ 1.720526] pci 0000:00:16.0: Adding to iommu group 4 |
| [ 1.720572] pci 0000:00:1a.0: Adding to iommu group 5 |
| [ 1.720621] pci 0000:00:1b.0: Adding to iommu group 6 |
| [ 1.720668] pci 0000:00:1c.0: Adding to iommu group 7 |
| [ 1.720719] pci 0000:00:1c.1: Adding to iommu group 8 |
| [ 1.720764] pci 0000:00:1d.0: Adding to iommu group 9 |
| [ 1.720831] pci 0000:00:1f.0: Adding to iommu group 10 |
| [ 1.720850] pci 0000:00:1f.2: Adding to iommu group 10 |
| [ 1.720863] pci 0000:00:1f.3: Adding to iommu group 10 |
| [ 1.720875] pci 0000:00:1f.6: Adding to iommu group 10 |
| [ 1.720948] pci 0000:01:00.0: Adding to iommu group 11 |
| [ 1.721005] pci 0000:02:00.0: Adding to iommu group 12 |
| [ 1.721010] DMAR: Intel(R) Virtualization Technology for Directed I/O |
| [ 1.723873] Initialise system trusted keyrings |
| [ 1.723884] Key type blacklist registered |
| [ 1.723934] workingset: timestamp_bits=40 max_order=21 bucket_order=0 |
| [ 1.725582] zbud: loaded |
| [ 1.725954] Platform Keyring initialized |
| [ 1.725957] Key type asymmetric registered |
| [ 1.725958] Asymmetric key parser 'x509' registered |
| [ 1.725967] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) |
| [ 1.726014] io scheduler mq-deadline registered |
| [ 1.726369] pcieport 0000:00:1c.0: PME: Signaling with IRQ 26 |
| [ 1.726626] pcieport 0000:00:1c.1: PME: Signaling with IRQ 27 |
| [ 1.726729] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 |
| [ 1.726745] intel_idle: MWAIT substates: 0x21120 |
| [ 1.726746] intel_idle: v0.4.1 model 0x3A |
| [ 1.726975] intel_idle: lapic_timer_reliable_states 0xffffffff |
| [ 1.728977] thermal LNXTHERM:00: registered as thermal_zone0 |
| [ 1.728979] ACPI: Thermal Zone [THM0] (40 C) |
| [ 1.729999] thermal LNXTHERM:01: registered as thermal_zone1 |
| [ 1.730000] ACPI: Thermal Zone [THM1] (27 C) |
| [ 1.730128] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
| [ 1.730879] Linux agpgart interface v0.103 |
| [ 1.730945] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de> |
| [ 1.730945] AMD-Vi: AMD IOMMUv2 functionality not available on this system |
| [ 1.731261] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 |
| [ 1.732973] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| [ 1.732979] serio: i8042 AUX port at 0x60,0x64 irq 12 |
| [ 1.733135] mousedev: PS/2 mouse device common for all mice |
| [ 1.733180] rtc_cmos 00:03: RTC can wake from S4 |
| [ 1.733361] rtc_cmos 00:03: registered as rtc0 |
| [ 1.733381] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs |
| [ 1.733393] intel_pstate: Intel P-state driver initializing |
| [ 1.733736] ledtrig-cpu: registered to indicate activity on CPUs |
| [ 1.734502] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 |
| [ 1.734808] NET: Registered protocol family 10 |
| [ 1.766092] Segment Routing with IPv6 |
| [ 1.766152] mip6: Mobile IPv6 |
| [ 1.766158] NET: Registered protocol family 17 |
| [ 1.766335] mpls_gso: MPLS GSO support |
| [ 1.767212] microcode: sig=0x306a9, pf=0x10, revision=0x21 |
| [ 1.767253] microcode: Microcode Update Driver: v2.2. |
| [ 1.767291] sched_clock: Marking stable (1766495883, 533422)->(1771959711, -4930406) |
| [ 1.768052] registered taskstats version 1 |
| [ 1.768055] Loading compiled-in X.509 certificates |
| [ 1.813556] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' |
| [ 1.813573] Loaded X.509 cert 'Debian Secure Boot Signer: 00a7468def' |
| [ 1.813594] zswap: loaded using pool lzo/zbud |
| [ 1.813679] AppArmor: AppArmor sha1 policy hashing enabled |
| [ 1.814008] rtc_cmos 00:03: setting system clock to 2019-12-23T21:48:06 UTC (1577137686) |
| [ 1.815263] Freeing unused kernel image memory: 1660K |
| [ 1.844916] Write protecting the kernel read-only data: 16384k |
| [ 1.846170] Freeing unused kernel image memory: 2036K |
| [ 1.846640] Freeing unused kernel image memory: 540K |
| [ 1.858704] x86/mm: Checked W+X mappings: passed, no W+X pages found. |
| [ 1.858705] x86/mm: Checking user space page tables |
| [ 1.866162] x86/mm: Checked W+X mappings: passed, no W+X pages found. |
| [ 1.866164] Run /init as init process |
| [ 1.999650] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:29/PNP0C09:00/PNP0C0E:00/input/input2 |
| [ 1.999680] ACPI: Sleep Button [SLPB] |
| [ 1.999753] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:29/PNP0C09:00/PNP0C0D:00/input/input3 |
| [ 1.999764] ACPI: Lid Switch [LID] |
| [ 1.999824] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 |
| [ 1.999834] ACPI: Power Button [PWRF] |
| [ 2.025724] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20190703/utaddress-204) |
| [ 2.025731] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 2.025734] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20190703/utaddress-204) |
| [ 2.025738] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 2.025739] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20190703/utaddress-204) |
| [ 2.025744] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 2.025744] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20190703/utaddress-204) |
| [ 2.025749] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 2.025749] lpc_ich: Resource conflict(s) found affecting gpio_ich |
| [ 2.032334] ACPI: bus type USB registered |
| [ 2.032363] usbcore: registered new interface driver usbfs |
| [ 2.032373] usbcore: registered new interface driver hub |
| [ 2.032404] usbcore: registered new device driver usb |
| [ 2.037149] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt |
| [ 2.050396] xhci_hcd 0000:00:14.0: xHCI Host Controller |
| [ 2.050404] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 |
| [ 2.051499] xhci_hcd 0000:00:14.0: hcc params 0x200071a1 hci version 0x100 quirks 0x000000000000b930 |
| [ 2.051505] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported |
| [ 2.051698] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03 |
| [ 2.051700] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.051703] usb usb1: Product: xHCI Host Controller |
| [ 2.051704] usb usb1: Manufacturer: Linux 5.3.0-3-amd64 xhci-hcd |
| [ 2.051706] usb usb1: SerialNumber: 0000:00:14.0 |
| [ 2.051848] hub 1-0:1.0: USB hub found |
| [ 2.051860] hub 1-0:1.0: 4 ports detected |
| [ 2.052054] xhci_hcd 0000:00:14.0: xHCI Host Controller |
| [ 2.052058] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 |
| [ 2.052061] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed |
| [ 2.052110] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.03 |
| [ 2.052112] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.052114] usb usb2: Product: xHCI Host Controller |
| [ 2.052115] usb usb2: Manufacturer: Linux 5.3.0-3-amd64 xhci-hcd |
| [ 2.052117] usb usb2: SerialNumber: 0000:00:14.0 |
| [ 2.052241] hub 2-0:1.0: USB hub found |
| [ 2.052252] hub 2-0:1.0: 4 ports detected |
| [ 2.053437] sdhci: Secure Digital Host Controller Interface driver |
| [ 2.053438] sdhci: Copyright(c) Pierre Ossman |
| [ 2.054550] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| [ 2.055590] ehci-pci: EHCI PCI platform driver |
| [ 2.055760] ehci-pci 0000:00:1a.0: EHCI Host Controller |
| [ 2.055767] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3 |
| [ 2.055782] ehci-pci 0000:00:1a.0: debug port 2 |
| [ 2.059300] sdhci-pci 0000:01:00.0: SDHCI controller found [1180:e823] (rev 4) |
| [ 2.059607] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes |
| [ 2.059714] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported |
| [ 2.059730] ehci-pci 0000:00:1a.0: irq 19, io mem 0xe061e000 |
| [ 2.059887] mmc0: SDHCI controller on PCI [0000:01:00.0] using DMA |
| [ 2.069394] SCSI subsystem initialized |
| [ 2.072895] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 |
| [ 2.072974] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03 |
| [ 2.072976] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.072978] usb usb3: Product: EHCI Host Controller |
| [ 2.072980] usb usb3: Manufacturer: Linux 5.3.0-3-amd64 ehci_hcd |
| [ 2.072982] usb usb3: SerialNumber: 0000:00:1a.0 |
| [ 2.073156] hub 3-0:1.0: USB hub found |
| [ 2.073167] hub 3-0:1.0: 3 ports detected |
| [ 2.073518] ehci-pci 0000:00:1d.0: EHCI Host Controller |
| [ 2.073525] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4 |
| [ 2.073541] ehci-pci 0000:00:1d.0: debug port 2 |
| [ 2.077477] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported |
| [ 2.077514] ehci-pci 0000:00:1d.0: irq 18, io mem 0xe061f000 |
| [ 2.084007] cryptd: max_cpu_qlen set to 1000 |
| [ 2.088264] libata version 3.00 loaded. |
| [ 2.092864] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 |
| [ 2.092935] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03 |
| [ 2.092937] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 2.092940] usb usb4: Product: EHCI Host Controller |
| [ 2.092941] usb usb4: Manufacturer: Linux 5.3.0-3-amd64 ehci_hcd |
| [ 2.092943] usb usb4: SerialNumber: 0000:00:1d.0 |
| [ 2.093113] hub 4-0:1.0: USB hub found |
| [ 2.093125] hub 4-0:1.0: 3 ports detected |
| [ 2.094695] ahci 0000:00:1f.2: version 3.0 |
| [ 2.094901] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled |
| [ 2.115264] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode |
| [ 2.115268] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst |
| [ 2.115825] AVX version of gcm_enc/dec engaged. |
| [ 2.115826] AES CTR mode by8 optimization enabled |
| [ 2.122606] scsi host0: ahci |
| [ 2.122814] scsi host1: ahci |
| [ 2.122937] scsi host2: ahci |
| [ 2.123053] scsi host3: ahci |
| [ 2.123177] scsi host4: ahci |
| [ 2.123293] scsi host5: ahci |
| [ 2.123357] ata1: SATA max UDMA/133 abar m2048@0xe061d000 port 0xe061d100 irq 29 |
| [ 2.123358] ata2: DUMMY |
| [ 2.123361] ata3: SATA max UDMA/133 abar m2048@0xe061d000 port 0xe061d200 irq 29 |
| [ 2.123362] ata4: DUMMY |
| [ 2.123363] ata5: DUMMY |
| [ 2.123364] ata6: DUMMY |
| [ 2.169480] [drm] VT-d active for gfx access |
| [ 2.169484] i915 0000:00:02.0: vgaarb: deactivate vga console |
| [ 2.169506] [drm] DMAR active, disabling use of stolen memory |
| [ 2.219568] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). |
| [ 2.219570] [drm] Driver supports precise vblank timestamp query. |
| [ 2.220430] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem |
| [ 2.268115] [drm] Initialized i915 1.6.0 20190619 for 0000:00:02.0 on minor 0 |
| [ 2.268296] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) |
| [ 2.294349] acpi device:0d: registered as cooling_device5 |
| [ 2.294455] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6 |
| [ 2.408854] usb 3-1: new high-speed USB device number 2 using ehci-pci |
| [ 2.428903] usb 4-1: new high-speed USB device number 2 using ehci-pci |
| [ 2.435573] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [ 2.443199] ata1.00: ATA-9: TS240GMTS420S, Q1121A0, max UDMA/133 |
| [ 2.443205] ata1.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 32), AA |
| [ 2.461160] ata1.00: configured for UDMA/133 |
| [ 2.473109] scsi 0:0:0:0: Direct-Access ATA TS240GMTS420S 1A0 PQ: 0 ANSI: 5 |
| [ 2.565698] usb 3-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 |
| [ 2.565704] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 2.566302] hub 3-1:1.0: USB hub found |
| [ 2.566471] hub 3-1:1.0: 6 ports detected |
| [ 2.585324] usb 4-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 |
| [ 2.585331] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 2.585769] hub 4-1:1.0: USB hub found |
| [ 2.585933] hub 4-1:1.0: 8 ports detected |
| [ 2.612740] fbcon: i915drmfb (fb0) is primary device |
| [ 2.748925] tsc: Refined TSC clocksource calibration: 1795.920 MHz |
| [ 2.748946] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19e31b7216c, max_idle_ns: 440795249889 ns |
| [ 2.748988] clocksource: Switched to clocksource tsc |
| [ 2.788409] ata3: SATA link down (SStatus 0 SControl 300) |
| [ 2.848621] psmouse serio1: synaptics: queried max coordinates: x [..5678], y [..4732] |
| [ 2.852969] usb 3-1.3: new full-speed USB device number 3 using ehci-pci |
| [ 2.879345] psmouse serio1: synaptics: queried min coordinates: x [1264..], y [1124..] |
| [ 2.879359] psmouse serio1: synaptics: Your touchpad (PNP: PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org. |
| [ 2.939488] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd001a3/0x940300/0x127c00/0x0, board id: 2182, fw id: 1164733 |
| [ 2.939507] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0 |
| [ 2.962679] usb 3-1.3: New USB device found, idVendor=147e, idProduct=2020, bcdDevice= 0.01 |
| [ 2.962684] usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 2.962687] usb 3-1.3: Product: Biometric Coprocessor |
| [ 2.962690] usb 3-1.3: Manufacturer: Auth |
| [ 2.979468] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5 |
| [ 3.040929] usb 3-1.4: new full-speed USB device number 4 using ehci-pci |
| [ 3.151975] usb 3-1.4: config 1 interface 1 altsetting 0 endpoint 0x83 has wMaxPacketSize 0, skipping |
| [ 3.151980] usb 3-1.4: config 1 interface 1 altsetting 0 endpoint 0x3 has wMaxPacketSize 0, skipping |
| [ 3.153402] usb 3-1.4: New USB device found, idVendor=0a5c, idProduct=21e6, bcdDevice= 1.12 |
| [ 3.153407] usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [ 3.153410] usb 3-1.4: Product: BCM20702A0 |
| [ 3.153413] usb 3-1.4: Manufacturer: Broadcom Corp |
| [ 3.153416] usb 3-1.4: SerialNumber: 0C84DCDA058E |
| [ 3.232942] usb 3-1.6: new high-speed USB device number 5 using ehci-pci |
| [ 3.405986] usb 3-1.6: New USB device found, idVendor=5986, idProduct=0266, bcdDevice=14.12 |
| [ 3.405991] usb 3-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 3.405995] usb 3-1.6: Product: Integrated Camera |
| [ 3.405998] usb 3-1.6: Manufacturer: SunplusIT INC. |
| [ 3.421634] [drm:intel_set_cpu_fifo_underrun_reporting [i915]] *ERROR* uncleared fifo underrun on pipe A |
| [ 3.421763] [drm:intel_cpu_fifo_underrun_irq_handler [i915]] *ERROR* CPU pipe A FIFO underrun |
| [ 3.422914] [drm:intel_set_pch_fifo_underrun_reporting [i915]] *ERROR* uncleared pch fifo underrun on pch transcoder A |
| [ 3.423023] [drm:cpt_irq_handler [i915]] *ERROR* PCH transcoder A FIFO underrun |
| [ 3.437721] Console: switching to colour frame buffer device 200x56 |
| [ 3.464255] i915 0000:00:02.0: fb0: i915drmfb frame buffer device |
| [ 3.490809] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB) |
| [ 3.490822] sd 0:0:0:0: [sda] Write Protect is off |
| [ 3.490825] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 |
| [ 3.490843] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 3.508059] sda: sda1 sda2 sda3 sda4 |
| [ 3.509350] sd 0:0:0:0: [sda] Attached SCSI disk |
| [ 3.584357] device-mapper: uevent: version 1.0.3 |
| [ 3.584435] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com |
| [ 3.613278] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 |
| [ 3.934535] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input7 |
| [ 25.172847] raid6: sse2x4 gen() 11725 MB/s |
| [ 25.240850] raid6: sse2x4 xor() 7952 MB/s |
| [ 25.308849] raid6: sse2x2 gen() 10130 MB/s |
| [ 25.376848] raid6: sse2x2 xor() 6891 MB/s |
| [ 25.444846] raid6: sse2x1 gen() 8524 MB/s |
| [ 25.512852] raid6: sse2x1 xor() 5940 MB/s |
| [ 25.512852] raid6: using algorithm sse2x4 gen() 11725 MB/s |
| [ 25.512853] raid6: .... xor() 7952 MB/s, rmw enabled |
| [ 25.512854] raid6: using ssse3x2 recovery algorithm |
| [ 25.520366] xor: automatically using best checksumming function avx |
| [ 25.576543] Btrfs loaded, crc32c=crc32c-intel |
| [ 25.639056] BTRFS: device label root devid 1 transid 78647 /dev/mapper/sda4_crypt |
| [ 25.684178] BTRFS info (device dm-0): disk space caching is enabled |
| [ 25.684182] BTRFS info (device dm-0): has skinny extents |
| [ 25.789563] BTRFS info (device dm-0): enabling ssd optimizations |
| [ 25.872591] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. |
| [ 26.158986] systemd[1]: Inserted module 'autofs4' |
| [ 26.181833] systemd[1]: systemd 244-3 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) |
| [ 26.201100] systemd[1]: Detected architecture x86-64. |
| [ 26.205492] systemd[1]: Set hostname to <debianLaptop>. |
| [ 26.411671] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly. |
| [ 26.427689] systemd[1]: /lib/systemd/system/thinkfan.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/thinkfan.pid → /run/thinkfan.pid; please update the unit file accordingly. |
| [ 26.444443] systemd[1]: /lib/systemd/system/docker.socket:6: ListenStream= references a path below legacy directory /var/run/, updating /var/run/docker.sock → /run/docker.sock; please update the unit file accordingly. |
| [ 26.453296] systemd[1]: /lib/systemd/system/pcscd.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/pcscd/pcscd.comm → /run/pcscd/pcscd.comm; please update the unit file accordingly. |
| [ 26.456974] systemd[1]: Created slice system-getty.slice. |
| [ 26.457296] systemd[1]: Created slice system-systemd\x2dcryptsetup.slice. |
| [ 26.457567] systemd[1]: Created slice system-systemd\x2dfsck.slice. |
| [ 26.457866] systemd[1]: Created slice User and Session Slice. |
| [ 26.457929] systemd[1]: Started Forward Password Requests to Wall Directory Watch. |
| [ 26.458132] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. |
| [ 26.458183] systemd[1]: Reached target User and Group Name Lookups. |
| [ 26.458195] systemd[1]: Reached target Remote File Systems. |
| [ 26.458203] systemd[1]: Reached target Slices. |
| [ 26.458216] systemd[1]: Reached target Swap. |
| [ 26.459038] systemd[1]: Listening on Syslog Socket. |
| [ 26.459135] systemd[1]: Listening on fsck to fsckd communication Socket. |
| [ 26.459191] systemd[1]: Listening on initctl Compatibility Named Pipe. |
| [ 26.459347] systemd[1]: Listening on Journal Audit Socket. |
| [ 26.459429] systemd[1]: Listening on Journal Socket (/dev/log). |
| [ 26.459533] systemd[1]: Listening on Journal Socket. |
| [ 26.459637] systemd[1]: Listening on udev Control Socket. |
| [ 26.459705] systemd[1]: Listening on udev Kernel Socket. |
| [ 26.460628] systemd[1]: Mounting Huge Pages File System... |
| [ 26.461724] systemd[1]: Mounting POSIX Message Queue File System... |
| [ 26.462894] systemd[1]: Mounting Kernel Debug File System... |
| [ 26.466160] systemd[1]: Starting Set the console keyboard layout... |
| [ 26.467996] systemd[1]: Starting Create list of static device nodes for the current kernel... |
| [ 26.469534] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. |
| [ 26.471320] systemd[1]: Starting Journal Service... |
| [ 26.473033] systemd[1]: Starting Load Kernel Modules... |
| [ 26.474490] systemd[1]: Starting Remount Root and Kernel File Systems... |
| [ 26.475704] systemd[1]: Starting udev Coldplug all Devices... |
| [ 26.477067] systemd[1]: Starting Uncomplicated firewall... |
| [ 26.478899] systemd[1]: Mounted Huge Pages File System. |
| [ 26.479239] systemd[1]: Mounted POSIX Message Queue File System. |
| [ 26.479496] systemd[1]: Mounted Kernel Debug File System. |
| [ 26.480437] systemd[1]: Started Set the console keyboard layout. |
| [ 26.481486] systemd[1]: Started Create list of static device nodes for the current kernel. |
| [ 26.482443] systemd[1]: Started Uncomplicated firewall. |
| [ 26.485603] BTRFS info (device dm-0): turning on discard |
| [ 26.485607] BTRFS info (device dm-0): disk space caching is enabled |
| [ 26.489237] systemd[1]: Started Remount Root and Kernel File Systems. |
| [ 26.489961] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. |
| [ 26.491094] systemd[1]: Starting Load/Save Random Seed... |
| [ 26.492423] systemd[1]: Starting Create System Users... |
| [ 26.507507] lp: driver loaded but no devices found |
| [ 26.509033] systemd[1]: Started Load/Save Random Seed. |
| [ 26.511822] ppdev: user-space parallel port driver |
| [ 26.517092] systemd[1]: Started Load Kernel Modules. |
| [ 26.517421] systemd[1]: Condition check resulted in FUSE Control File System being skipped. |
| [ 26.517506] systemd[1]: Condition check resulted in Kernel Configuration File System being skipped. |
| [ 26.518497] systemd[1]: Starting Apply Kernel Variables... |
| [ 26.528791] systemd[1]: Started Apply Kernel Variables. |
| [ 26.533551] systemd[1]: Started Create System Users. |
| [ 26.534654] systemd[1]: Starting Create Static Device Nodes in /dev... |
| [ 26.552335] systemd[1]: Started Create Static Device Nodes in /dev. |
| [ 26.552544] systemd[1]: Reached target Local File Systems (Pre). |
| [ 26.553578] systemd[1]: Starting udev Kernel Device Manager... |
| [ 26.574267] systemd[1]: Started udev Coldplug all Devices. |
| [ 26.575732] systemd[1]: Starting Helper to synchronize boot up for ifupdown... |
| [ 26.585659] systemd[1]: Started Helper to synchronize boot up for ifupdown. |
| [ 26.700722] systemd[1]: Started udev Kernel Device Manager. |
| [ 26.702305] systemd[1]: Starting Show Plymouth Boot Screen... |
| [ 26.730013] systemd[1]: plymouth-start.service: Succeeded. |
| [ 26.730661] systemd[1]: Started Show Plymouth Boot Screen. |
| [ 26.730845] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch being skipped. |
| [ 26.730993] systemd[1]: Started Forward Password Requests to Plymouth Directory Watch. |
| [ 26.872168] systemd[1]: Created slice system-systemd\x2dbacklight.slice. |
| [ 26.873406] systemd[1]: Starting Load/Save Screen Backlight Brightness of backlight:acpi_video0... |
| [ 26.887937] battery: ACPI: Battery Slot [BAT0] (battery present) |
| [ 26.888157] battery: ACPI: Battery Slot [BAT1] (battery absent) |
| [ 26.894665] tpm_tis 00:06: 1.2 TPM (device-id 0x0, rev-id 78) |
| [ 26.898973] systemd[1]: Started Load/Save Screen Backlight Brightness of backlight:acpi_video0. |
| [ 26.900601] systemd[1]: Starting Load/Save Screen Backlight Brightness of backlight:intel_backlight... |
| [ 26.915228] systemd[1]: Started Load/Save Screen Backlight Brightness of backlight:intel_backlight. |
| [ 26.946247] ACPI: AC Adapter [AC] (on-line) |
| [ 26.996074] systemd[1]: Started Journal Service. |
| [ 27.015420] systemd-journald[385]: Received client request to flush runtime journal. |
| [ 27.023924] iTCO_vendor_support: vendor-support=0 |
| [ 27.024628] input: PC Speaker as /devices/platform/pcspkr/input/input8 |
| [ 27.026382] sd 0:0:0:0: Attached scsi generic sg0 type 0 |
| [ 27.054755] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer |
| [ 27.054757] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules |
| [ 27.054758] RAPL PMU: hw unit of domain package 2^-16 Joules |
| [ 27.054759] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules |
| [ 27.065996] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 |
| [ 27.066047] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560) |
| [ 27.066296] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) |
| [ 27.073757] Non-volatile memory driver v1.3 |
| [ 27.123804] thinkpad_acpi: ThinkPad ACPI Extras v0.26 |
| [ 27.123806] thinkpad_acpi: http://ibm-acpi.sf.net/ |
| [ 27.123807] thinkpad_acpi: ThinkPad BIOS CBET4000 4.11-556-g95bff2e17e, EC G6HT24WW-3.22 |
| [ 27.123808] thinkpad_acpi: Lenovo ThinkPad X1 Carbon, model 346034U |
| [ 27.126558] thinkpad_acpi: radio switch found; radios are enabled |
| [ 27.128412] thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode |
| [ 27.128432] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver |
| [ 27.128432] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... |
| [ 27.136475] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one |
| [ 27.136582] thinkpad_acpi: Console audio control enabled, mode: monitor (read only) |
| [ 27.140822] thinkpad_acpi: battery 1 registered (start 0, stop 100) |
| [ 27.140829] battery: new extension: ThinkPad Battery Extension |
| [ 27.141166] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input9 |
| [ 27.165813] mc: Linux media interface: v0.10 |
| [ 27.182778] alg: No test for fips(ansi_cprng) (fips_ansi_cprng) |
| [ 27.222437] videodev: Linux video capture interface: v2.00 |
| [ 27.249137] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) |
| [ 27.258012] Intel(R) Wireless WiFi driver for Linux |
| [ 27.258013] Copyright(c) 2003- 2015 Intel Corporation |
| [ 27.261153] BTRFS info (device dm-0): device fsid fecd1560-5f5f-4264-ad98-606e63141621 devid 1 moved old:/dev/mapper/sda4_crypt new:/dev/dm-0 |
| [ 27.262410] BTRFS info (device dm-0): device fsid fecd1560-5f5f-4264-ad98-606e63141621 devid 1 moved old:/dev/dm-0 new:/dev/mapper/sda4_crypt |
| [ 27.280950] iwlwifi 0000:02:00.0: firmware: direct-loading firmware iwlwifi-6000g2a-6.ucode |
| [ 27.281157] iwlwifi 0000:02:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm |
| [ 27.289040] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker |
| [ 27.289043] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) |
| [ 27.289045] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0) |
| [ 27.289046] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 |
| [ 27.289047] snd_hda_codec_realtek hdaudioC0D0: inputs: |
| [ 27.289049] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18 |
| [ 27.289051] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12 |
| [ 27.324240] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 |
| [ 27.324317] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 |
| [ 27.324379] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 |
| [ 27.324444] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 |
| [ 27.348078] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:0266) |
| [ 27.391040] uvcvideo 3-1.6:1.0: Entity type for entity Extension 4 was not initialized! |
| [ 27.391043] uvcvideo 3-1.6:1.0: Entity type for entity Extension 3 was not initialized! |
| [ 27.391045] uvcvideo 3-1.6:1.0: Entity type for entity Processing 2 was not initialized! |
| [ 27.391047] uvcvideo 3-1.6:1.0: Entity type for entity Camera 1 was not initialized! |
| [ 27.392811] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.6/3-1.6:1.0/input/input14 |
| [ 27.395578] usbcore: registered new interface driver uvcvideo |
| [ 27.395579] USB Video Class driver (1.1.1) |
| [ 27.447930] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled |
| [ 27.447932] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled |
| [ 27.447934] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled |
| [ 27.447936] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205S AGN, REV=0xB0 |
| [ 27.447960] intel_rapl_common: Found RAPL domain package |
| [ 27.447962] intel_rapl_common: Found RAPL domain core |
| [ 27.447963] intel_rapl_common: Found RAPL domain uncore |
| [ 27.484560] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' |
| [ 27.495068] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0 |
| [ 27.503716] Bluetooth: Core ver 2.22 |
| [ 27.503733] NET: Registered protocol family 31 |
| [ 27.503734] Bluetooth: HCI device and connection manager initialized |
| [ 27.503739] Bluetooth: HCI socket layer initialized |
| [ 27.503741] Bluetooth: L2CAP socket layer initialized |
| [ 27.503745] Bluetooth: SCO socket layer initialized |
| [ 27.543057] usbcore: registered new interface driver btusb |
| [ 27.662908] Bluetooth: hci0: BCM: chip id 63 |
| [ 27.663917] Bluetooth: hci0: BCM: features 0x07 |
| [ 27.679930] Bluetooth: hci0: BCM20702A |
| [ 27.680903] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000 |
| [ 27.682305] bluetooth hci0: firmware: direct-loading firmware brcm/BCM20702A1-0a5c-21e6.hcd |
| [ 27.692344] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) |
| [ 27.740017] audit: type=1400 audit(1577137712.418:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=601 comm="apparmor_parser" |
| [ 27.741869] audit: type=1400 audit(1577137712.422:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=603 comm="apparmor_parser" |
| [ 27.745947] audit: type=1400 audit(1577137712.426:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=600 comm="apparmor_parser" |
| [ 27.745973] audit: type=1400 audit(1577137712.426:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=604 comm="apparmor_parser" |
| [ 27.745977] audit: type=1400 audit(1577137712.426:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=604 comm="apparmor_parser" |
| [ 27.747428] audit: type=1400 audit(1577137712.426:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=605 comm="apparmor_parser" |
| [ 27.753833] audit: type=1400 audit(1577137712.434:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=608 comm="apparmor_parser" |
| [ 27.753837] audit: type=1400 audit(1577137712.434:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=608 comm="apparmor_parser" |
| [ 27.753840] audit: type=1400 audit(1577137712.434:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=608 comm="apparmor_parser" |
| [ 27.756374] audit: type=1400 audit(1577137712.434:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=602 comm="apparmor_parser" |
| [ 28.263140] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 |
| [ 28.263142] Bluetooth: BNEP filters: protocol multicast |
| [ 28.263147] Bluetooth: BNEP socket layer initialized |
| [ 28.682894] Bluetooth: hci0: BCM20702A1 (001.002.014) build 1757 |
| [ 28.698904] Bluetooth: hci0: Broadcom Bluetooth Device |
| [ 28.887702] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0 |
| [ 29.186155] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0 |
| [ 29.295741] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0 |
| [ 29.593753] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0 |
| [ 30.628537] Bluetooth: RFCOMM TTY layer initialized |
| [ 30.628547] Bluetooth: RFCOMM socket layer initialized |
| [ 30.628552] Bluetooth: RFCOMM ver 1.11 |
| [ 33.468157] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0 |
| [ 33.506807] rfkill: input handler disabled |
| [ 33.769824] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0 |
| [ 37.106189] rfkill: input handler enabled |
| [ 37.230639] broken atomic modeset userspace detected, disabling atomic |
| [ 38.516463] fuse: init (API version 7.31) |
| [ 39.265100] wlp2s0: authenticate with 44:e9:dd:fd:25:50 |
| [ 39.267101] wlp2s0: send auth to 44:e9:dd:fd:25:50 (try 1/3) |
| [ 39.287913] wlp2s0: send auth to 44:e9:dd:fd:25:50 (try 2/3) |
| [ 39.292241] wlp2s0: authenticated |
| [ 39.292411] wlp2s0: waiting for beacon from 44:e9:dd:fd:25:50 |
| [ 39.396864] wlp2s0: associate with 44:e9:dd:fd:25:50 (try 1/3) |
| [ 39.434828] wlp2s0: associate with 44:e9:dd:fd:25:50 (try 2/3) |
| [ 39.439196] wlp2s0: RX AssocResp from 44:e9:dd:fd:25:50 (capab=0x431 status=0 aid=5) |
| [ 39.457716] wlp2s0: associated |
| [ 39.588678] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready |
| [ 40.234481] kauditd_printk_skb: 10 callbacks suppressed |
| [ 40.234483] audit: type=1400 audit(1577137724.914:22): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=1644 comm="apparmor_parser" |
| [ 40.343146] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. |
| [ 40.345878] Bridge firewalling registered |
| [ 40.633656] Initializing XFRM netlink socket |
| [ 42.362979] rfkill: input handler disabled |