blob: 7e0f2413f835911929410764f51c42dbfd8616fe [file] [log] [blame]
[ 0.000000] microcode: microcode updated early to revision 0x20, date = 2018-04-10
[ 0.000000] Linux version 4.18.3-gentoo (root@localhost) (gcc version 6.3.0 (Gentoo 6.3.0 p1.0)) #1 SMP Sat Oct 13 01:10:13 MSK 2018
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.18.3-gentoo root=/dev/mapper/vg-root ro root=/dev/ram0 real_root=/dev/mapper/vg-root crypt_root=/dev/sdc3 dolvm thinkpad_acpi.fan_control=1 "acpi_osi=!Windows 2012" root_trim=yes net.ifnames=0
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16
[ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ff18fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007ff19000-0x000000007fffffff] type 16
[ 0.000000] BIOS-e820: [mem 0x0000000080000000-0x00000000829fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000067b5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: LENOVO 2463A49/2463A49, BIOS CBET4000 4.8-1777-gf3aa6e9319 10/12/2018
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] last_pfn = 0x67b600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-back
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 0B0000000 mask FF0000000 write-combining
[ 0.000000] 2 base 0C0000000 mask FFE000000 write-combining
[ 0.000000] 3 base 0D0000000 mask FF0000000 write-combining
[ 0.000000] 4 base 100000000 mask F00000000 write-back
[ 0.000000] 5 base 200000000 mask E00000000 write-back
[ 0.000000] 6 base 400000000 mask C00000000 write-back
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] last_pfn = 0x7ff19 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [(____ptrval____)] 99000 size 24576
[ 0.000000] BRK [0x02e2d000, 0x02e2dfff] PGTABLE
[ 0.000000] BRK [0x02e2e000, 0x02e2efff] PGTABLE
[ 0.000000] BRK [0x02e2f000, 0x02e2ffff] PGTABLE
[ 0.000000] BRK [0x02e30000, 0x02e30fff] PGTABLE
[ 0.000000] BRK [0x02e31000, 0x02e31fff] PGTABLE
[ 0.000000] BRK [0x02e32000, 0x02e32fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x379e1000-0x37ce7fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0000 000024 (v02 CORE )
[ 0.000000] ACPI: XSDT 0x000000007FF420E0 00005C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: FACP 0x000000007FF45B00 0000F4 (v04 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: DSDT 0x000000007FF42280 00387B (v02 COREv4 COREBOOT 20110725 INTL 20161222)
[ 0.000000] ACPI: FACS 0x000000007FF42240 000040
[ 0.000000] ACPI: FACS 0x000000007FF42240 000040
[ 0.000000] ACPI: SSDT 0x000000007FF45C00 0030E0 (v02 CORE COREBOOT 0000002A CORE 0000002A)
[ 0.000000] ACPI: MCFG 0x000000007FF48CE0 00003C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: TCPA 0x000000007FF48D20 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: APIC 0x000000007FF48D60 00008C (v02 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: DMAR 0x000000007FF48DF0 0000A8 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: HPET 0x000000007FF48EA0 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000067b5fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x67b5e7000-0x67b5eafff]
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000067b5fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009ffff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000007ff18fff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000067b5fffff]
[ 0.000000] Reserved but unavailable: 328 pages
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000067b5fffff]
[ 0.000000] On node 0 totalpages: 6272184
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 22 pages reserved
[ 0.000000] DMA zone: 3999 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 8125 pages used for memmap
[ 0.000000] DMA32 zone: 519961 pages, LIFO batch:31
[ 0.000000] Normal zone: 89816 pages used for memmap
[ 0.000000] Normal zone: 5748224 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics memory at [mem 0x80a00000-0x829fffff]
[ 0.000000] ACPI: PM-Timer IO Port: 0x508
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7ff19000-0x7fffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x80000000-0x829fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x82a00000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xfed3ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed8ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfed91fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed92000-0xffffffff]
[ 0.000000] [mem 0x82a00000-0xefffffff] available for PCI devices
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.000000] random: get_random_bytes called from start_kernel+0x8b/0x495 with crng_init=0
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] percpu: Embedded 43 pages/cpu @(____ptrval____) s138648 r8192 d29288 u262144
[ 0.000000] pcpu-alloc: s138648 r8192 d29288 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 6174157
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.18.3-gentoo root=/dev/mapper/vg-root ro root=/dev/ram0 real_root=/dev/mapper/vg-root crypt_root=/dev/sdc3 dolvm thinkpad_acpi.fan_control=1 "acpi_osi=!Windows 2012" root_trim=yes net.ifnames=0
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 24593920K/25088736K available (16412K kernel code, 1575K rwdata, 3704K rodata, 1312K init, 648K bss, 494816K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS: 4352, nr_irqs: 488, preallocated irqs: 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] ACPI: Core revision 20180531
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] APIC: Switch to symmetric I/O mode setup
[ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.005000] tsc: Fast TSC calibration using PIT
[ 0.006000] tsc: Detected 2693.763 MHz processor
[ 0.006000] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x26d43a9d412, max_idle_ns: 440795318185 ns
[ 0.006000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5387.52 BogoMIPS (lpj=2693763)
[ 0.006000] pid_max: default: 32768 minimum: 301
[ 0.006000] Security Framework initialized
[ 0.006000] SELinux: Initializing.
[ 0.006000] SELinux: Starting in permissive mode
[ 0.011128] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
[ 0.013475] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.013661] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.013807] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.014086] mce: CPU supports 9 MCE banks
[ 0.014165] CPU0: Thermal monitoring enabled (TM1)
[ 0.014244] process: using mwait in idle threads
[ 0.014317] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.014390] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.014465] Spectre V2 : Vulnerable: Minimal generic ASM retpoline
[ 0.014538] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.014637] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[ 0.014736] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.014811] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.015017] Freeing SMP alternatives memory: 48K
[ 0.015489] TSC deadline timer enabled
[ 0.015492] smpboot: CPU0: Intel(R) Core(TM) i7-3740QM CPU @ 2.70GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[ 0.015709] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.015875] ... version: 3
[ 0.015967] ... bit width: 48
[ 0.016000] ... generic registers: 4
[ 0.016000] ... value mask: 0000ffffffffffff
[ 0.016000] ... max period: 00007fffffffffff
[ 0.016000] ... fixed-purpose events: 3
[ 0.016000] ... event mask: 000000070000000f
[ 0.016033] Hierarchical SRCU implementation.
[ 0.016232] smp: Bringing up secondary CPUs ...
[ 0.016379] x86: Booting SMP configuration:
[ 0.016473] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.026023] smp: Brought up 1 node, 8 CPUs
[ 0.026197] smpboot: Max logical packages: 1
[ 0.026290] smpboot: Total of 8 processors activated (43100.20 BogoMIPS)
[ 0.027506] devtmpfs: initialized
[ 0.028091] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.028078] kworker/u16:0 (52) used greatest stack depth: 14184 bytes left
[ 0.028246] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.028504] RTC time: 22:47:54, date: 10/12/18
[ 0.028666] NET: Registered protocol family 16
[ 0.028903] audit: initializing netlink subsys (disabled)
[ 0.029006] audit: type=2000 audit(1539384474.029:1): state=initialized audit_enabled=0 res=1
[ 0.029153] cpuidle: using governor ladder
[ 0.029153] cpuidle: using governor menu
[ 0.029207] ACPI: bus type PCI registered
[ 0.029345] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.029491] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.029594] PCI: Using configuration type 1 for base access
[ 0.030075] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.033792] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.034030] cryptd: max_cpu_qlen set to 1000
[ 0.035057] ACPI: Added _OSI(Module Device)
[ 0.035151] ACPI: Added _OSI(Processor Device)
[ 0.035245] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.035339] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.035433] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.035526] ACPI: Deleted _OSI(Windows 2012)
[ 0.037899] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.039237] ACPI: EC: EC started
[ 0.039330] ACPI: EC: interrupt blocked
[ 0.039693] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
[ 0.039788] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.039931] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions
[ 0.040001] ACPI: Interpreter enabled
[ 0.040109] ACPI: (supports S0 S3 S4 S5)
[ 0.040202] ACPI: Using IOAPIC for interrupt routing
[ 0.040312] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.041002] ACPI: Enabled 1 GPEs in block 00 to 3F
[ 0.044662] ACPI: Power Resource [FPWR] (off)
[ 0.045027] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.045127] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.045306] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability LTR]
[ 0.045455] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.045661] PCI host bridge to bus 0000:00
[ 0.045756] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.045853] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.045950] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.046002] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.046144] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.046287] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.046430] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.046573] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.046715] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.046858] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.047000] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.047002] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.047144] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.047287] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.047430] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.047571] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[ 0.047714] pci_bus 0000:00: root bus resource [mem 0x82a00001-0xefffffff window]
[ 0.047856] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[ 0.048000] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.048008] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.048088] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[ 0.048117] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.048178] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 0.048188] pci 0000:00:02.0: reg 0x10: [mem 0xe2400000-0xe27fffff 64bit]
[ 0.048194] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.048197] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f]
[ 0.048260] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000
[ 0.048269] pci 0000:00:04.0: reg 0x10: [mem 0xe2a30000-0xe2a37fff 64bit]
[ 0.048353] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.048376] pci 0000:00:14.0: reg 0x10: [mem 0xe2a20000-0xe2a2ffff 64bit]
[ 0.048442] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.048505] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[ 0.048524] pci 0000:00:19.0: reg 0x10: [mem 0xe2a00000-0xe2a1ffff]
[ 0.048532] pci 0000:00:19.0: reg 0x14: [mem 0xe2a3d000-0xe2a3dfff]
[ 0.048540] pci 0000:00:19.0: reg 0x18: [io 0x4040-0x405f]
[ 0.048596] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.048654] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.048676] pci 0000:00:1a.0: reg 0x10: [mem 0xe2a3f000-0xe2a3f3ff]
[ 0.048755] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.048819] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.048839] pci 0000:00:1b.0: reg 0x10: [mem 0xe2a38000-0xe2a3bfff 64bit]
[ 0.048908] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.049007] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.049111] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.049200] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 0.049337] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.049423] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[ 0.049562] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.049648] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.049669] pci 0000:00:1d.0: reg 0x10: [mem 0xe2a40000-0xe2a403ff]
[ 0.049749] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.049812] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100
[ 0.050007] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.050007] pci 0000:00:1f.2: reg 0x10: [io 0x4088-0x408f]
[ 0.050007] pci 0000:00:1f.2: reg 0x14: [io 0x4098-0x409b]
[ 0.050007] pci 0000:00:1f.2: reg 0x18: [io 0x4090-0x4097]
[ 0.050011] pci 0000:00:1f.2: reg 0x1c: [io 0x409c-0x409f]
[ 0.050019] pci 0000:00:1f.2: reg 0x20: [io 0x4060-0x407f]
[ 0.050027] pci 0000:00:1f.2: reg 0x24: [mem 0xe2a3e000-0xe2a3e7ff]
[ 0.050069] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.050128] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.050146] pci 0000:00:1f.3: reg 0x10: [mem 0xe2a41000-0xe2a410ff 64bit]
[ 0.050166] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.050259] pci 0000:01:00.0: [10de:0ffc] type 00 class 0x030000
[ 0.050276] pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xe0ffffff]
[ 0.050288] pci 0000:01:00.0: reg 0x14: [mem 0xb0000000-0xbfffffff 64bit pref]
[ 0.050299] pci 0000:01:00.0: reg 0x1c: [mem 0xc0000000-0xc1ffffff 64bit pref]
[ 0.050306] pci 0000:01:00.0: reg 0x24: [io 0x2000-0x207f]
[ 0.050314] pci 0000:01:00.0: reg 0x30: [mem 0xe1000000-0xe107ffff pref]
[ 0.050409] pci 0000:01:00.1: [10de:0e1b] type 00 class 0x040300
[ 0.050425] pci 0000:01:00.1: reg 0x10: [mem 0xe1080000-0xe1083fff]
[ 0.050559] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.050655] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.050657] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe10fffff]
[ 0.050659] pci 0000:00:01.0: bridge window [mem 0xb0000000-0xc1ffffff 64bit pref]
[ 0.050748] pci 0000:02:00.0: [1180:e822] type 00 class 0x080501
[ 0.050786] pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz.
[ 0.050937] pci 0000:02:00.0: reg 0x10: [mem 0xe2801000-0xe28010ff]
[ 0.051246] pci 0000:02:00.0: supports D1 D2
[ 0.051247] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.051382] pci 0000:02:00.1: [1180:e232] type 00 class 0x088000
[ 0.051442] pci 0000:02:00.1: reg 0x10: [mem 0xe2802000-0xe28020ff]
[ 0.051726] pci 0000:02:00.1: supports D1 D2
[ 0.051727] pci 0000:02:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.051858] pci 0000:02:00.3: [1180:e832] type 00 class 0x0c0010
[ 0.051917] pci 0000:02:00.3: reg 0x10: [mem 0xe2800000-0xe28007ff]
[ 0.052086] pci 0000:02:00.3: Enabling fixed DMA alias to 00.0
[ 0.052300] pci 0000:02:00.3: supports D1 D2
[ 0.052300] pci 0000:02:00.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.052507] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.052609] pci 0000:00:1c.0: bridge window [mem 0xe2800000-0xe28fffff]
[ 0.052796] pci 0000:03:00.0: [8086:0085] type 00 class 0x028000
[ 0.053045] pci 0000:03:00.0: reg 0x10: [mem 0xe2900000-0xe2901fff 64bit]
[ 0.053811] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.054168] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.054269] pci 0000:00:1c.1: bridge window [mem 0xe2900000-0xe29fffff]
[ 0.054330] pci 0000:00:1c.2: PCI bridge to [bus 04]
[ 0.054427] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
[ 0.054432] pci 0000:00:1c.2: bridge window [mem 0xe1c00000-0xe23fffff]
[ 0.054439] pci 0000:00:1c.2: bridge window [mem 0xe1400000-0xe1bfffff 64bit pref]
[ 0.054588] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.054724] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.054857] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.054990] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.055035] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.055169] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.055303] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.055436] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.056080] ACPI: EC: interrupt unblocked
[ 0.056188] ACPI: EC: event unblocked
[ 0.056299] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.056443] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
[ 0.057017] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.057103] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.057250] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[ 0.057250] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.057250] pci 0000:00:02.0: vgaarb: no bridge control possible
[ 0.057250] vgaarb: loaded
[ 0.057364] SCSI subsystem initialized
[ 0.057468] libata version 3.00 loaded.
[ 0.058001] ACPI: bus type USB registered
[ 0.058011] usbcore: registered new interface driver usbfs
[ 0.058011] usbcore: registered new interface driver hub
[ 0.058016] usbcore: registered new device driver usb
[ 0.058016] videodev: Linux video capture interface: v2.00
[ 0.058017] pps_core: LinuxPPS API ver. 1 registered
[ 0.058103] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.058251] PTP clock support registered
[ 0.058365] EDAC MC: Ver: 3.0.0
[ 0.059050] Advanced Linux Sound Architecture Driver Initialized.
[ 0.059161] PCI: Using ACPI for IRQ routing
[ 0.060316] PCI: pci_cache_line_size set to 64 bytes
[ 0.060442] e820: reserve RAM buffer [mem 0x7ff19000-0x7fffffff]
[ 0.060444] e820: reserve RAM buffer [mem 0x67b600000-0x67bffffff]
[ 0.061012] Bluetooth: Core ver 2.22
[ 0.061012] NET: Registered protocol family 31
[ 0.061012] Bluetooth: HCI device and connection manager initialized
[ 0.061012] Bluetooth: HCI socket layer initialized
[ 0.061012] Bluetooth: L2CAP socket layer initialized
[ 0.061012] Bluetooth: SCO socket layer initialized
[ 0.061104] NetLabel: Initializing
[ 0.061195] NetLabel: domain hash size = 128
[ 0.061288] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.061396] NetLabel: unlabeled traffic allowed by default
[ 0.062177] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.062277] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.064015] clocksource: Switched to clocksource tsc-early
[ 0.073685] VFS: Disk quotas dquot_6.6.0
[ 0.073793] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.075073] pnp: PnP ACPI init
[ 0.075285] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.075382] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.075479] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.075575] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.075670] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.075766] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.075862] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.075958] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.076058] system 00:00: [mem 0x20000000-0x201fffff] could not be reserved
[ 0.076156] system 00:00: [mem 0x40000000-0x401fffff] could not be reserved
[ 0.076257] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.076641] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.076742] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.076773] system 00:02: [io 0x0500-0x057f] has been reserved
[ 0.076869] system 00:02: [io 0x0480-0x04bf] has been reserved
[ 0.076968] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.076982] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.077012] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.077033] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.077053] pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active)
[ 0.077072] pnp: PnP ACPI: found 7 devices
[ 0.081711] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.081897] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.081993] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.082091] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe10fffff]
[ 0.082188] pci 0000:00:01.0: bridge window [mem 0xb0000000-0xc1ffffff 64bit pref]
[ 0.082333] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.082433] pci 0000:00:1c.0: bridge window [mem 0xe2800000-0xe28fffff]
[ 0.082539] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.082638] pci 0000:00:1c.1: bridge window [mem 0xe2900000-0xe29fffff]
[ 0.082746] pci 0000:00:1c.2: PCI bridge to [bus 04]
[ 0.082841] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
[ 0.082942] pci 0000:00:1c.2: bridge window [mem 0xe1c00000-0xe23fffff]
[ 0.083044] pci 0000:00:1c.2: bridge window [mem 0xe1400000-0xe1bfffff 64bit pref]
[ 0.083195] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.083196] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.083197] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.083198] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.083199] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.083200] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.083201] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.083201] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.083202] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.083203] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.083204] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.083205] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[ 0.083206] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[ 0.083207] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[ 0.083208] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[ 0.083209] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
[ 0.083210] pci_bus 0000:00: resource 20 [mem 0x82a00001-0xefffffff window]
[ 0.083211] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff window]
[ 0.083212] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.083213] pci_bus 0000:01: resource 1 [mem 0xe0000000-0xe10fffff]
[ 0.083214] pci_bus 0000:01: resource 2 [mem 0xb0000000-0xc1ffffff 64bit pref]
[ 0.083215] pci_bus 0000:02: resource 1 [mem 0xe2800000-0xe28fffff]
[ 0.083216] pci_bus 0000:03: resource 1 [mem 0xe2900000-0xe29fffff]
[ 0.083217] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
[ 0.083218] pci_bus 0000:04: resource 1 [mem 0xe1c00000-0xe23fffff]
[ 0.083219] pci_bus 0000:04: resource 2 [mem 0xe1400000-0xe1bfffff 64bit pref]
[ 0.083281] NET: Registered protocol family 2
[ 0.083506] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.083728] TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.084198] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.084409] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.084544] UDP hash table entries: 16384 (order: 7, 524288 bytes)
[ 0.084710] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
[ 0.084900] NET: Registered protocol family 1
[ 0.085082] RPC: Registered named UNIX socket transport module.
[ 0.085177] RPC: Registered udp transport module.
[ 0.085270] RPC: Registered tcp transport module.
[ 0.085363] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.085538] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.086083] pci 0000:01:00.1: Linked as a consumer to 0000:01:00.0
[ 0.086230] PCI: CLS 64 bytes, default 64
[ 0.086292] Unpacking initramfs...
[ 0.370076] Freeing initrd memory: 3100K
[ 0.370188] DMAR: Host address width 36
[ 0.370280] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.370388] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[ 0.370530] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.370627] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[ 0.374081] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.374179] software IO TLB [mem 0x7bf19000-0x7ff19000] (64MB) mapped at [(____ptrval____)-(____ptrval____)]
[ 0.375765] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 0.375909] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 0.376007] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 0.376101] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ 0.377038] Scanning for low memory corruption every 60 seconds
[ 0.378120] Initialise system trusted keyrings
[ 0.378238] workingset: timestamp_bits=40 max_order=23 bucket_order=0
[ 0.380385] NFS: Registering the id_resolver key type
[ 0.380484] Key type id_resolver registered
[ 0.380577] Key type id_legacy registered
[ 0.380671] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.380770] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 0.381108] SELinux: Registering netfilter hooks
[ 0.381904] NET: Registered protocol family 38
[ 0.382024] Key type asymmetric registered
[ 0.382117] Asymmetric key parser 'x509' registered
[ 0.382237] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 0.382405] io scheduler noop registered
[ 0.382499] io scheduler deadline registered
[ 0.382622] io scheduler cfq registered (default)
[ 0.382716] io scheduler mq-deadline registered
[ 0.382810] io scheduler kyber registered
[ 0.383608] pcieport 0000:00:01.0: Signaling PME with IRQ 24
[ 0.383738] pcieport 0000:00:1c.0: Signaling PME with IRQ 25
[ 0.383861] pcieport 0000:00:1c.1: Signaling PME with IRQ 26
[ 0.383983] pcieport 0000:00:1c.2: Signaling PME with IRQ 27
[ 0.390577] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.391044] Non-volatile memory driver v1.3
[ 0.391156] Linux agpgart interface v0.103
[ 0.391296] intel_idle: MWAIT substates: 0x21120
[ 0.391297] intel_idle: v0.4.1 model 0x3A
[ 0.391539] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.391730] ACPI: AC Adapter [AC] (on-line)
[ 0.391871] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:29/PNP0C09:00/PNP0C0E:00/input/input0
[ 0.392033] ACPI: Sleep Button [SLPB]
[ 0.392155] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:29/PNP0C09:00/PNP0C0D:00/input/input1
[ 0.392308] ACPI: Lid Switch [LID]
[ 0.392428] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.392576] ACPI: Power Button [PWRF]
[ 0.395040] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.395135] ACPI: Thermal Zone [THM0] (53 C)
[ 0.395932] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.396033] ACPI: Thermal Zone [THM1] (27 C)
[ 0.396529] [drm] Replacing VGA console driver
[ 0.398789] Console: switching to colour dummy device 80x25
[ 0.404408] ACPI: Battery Slot [BAT0] (battery present)
[ 0.404524] ACPI: Battery Slot [BAT1] (battery absent)
[ 0.449155] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 0.449162] [drm] Driver supports precise vblank timestamp query.
[ 0.449442] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[ 0.473297] [drm] Initialized i915 1.6.0 20180514 for 0000:00:02.0 on minor 0
[ 0.473409] ACPI: Video Device [DEV0] (multi-head: no rom: yes post: no)
[ 0.473501] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input3
[ 0.473558] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 0.480587] acpi device:0c: registered as cooling_device9
[ 0.480629] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input4
[ 0.482530] loop: module loaded
[ 0.482606] ahci 0000:00:1f.2: version 3.0
[ 0.482726] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 0.493078] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 0.493083] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst
[ 0.493685] scsi host0: ahci
[ 0.493781] scsi host1: ahci
[ 0.493839] scsi host2: ahci
[ 0.493891] scsi host3: ahci
[ 0.493944] scsi host4: ahci
[ 0.493997] scsi host5: ahci
[ 0.494029] ata1: SATA max UDMA/133 abar m2048@0xe2a3e000 port 0xe2a3e100 irq 29
[ 0.494032] ata2: SATA max UDMA/133 abar m2048@0xe2a3e000 port 0xe2a3e180 irq 29
[ 0.494036] ata3: SATA max UDMA/133 abar m2048@0xe2a3e000 port 0xe2a3e200 irq 29
[ 0.494039] ata4: SATA max UDMA/133 abar m2048@0xe2a3e000 port 0xe2a3e280 irq 29
[ 0.494043] ata5: SATA max UDMA/133 abar m2048@0xe2a3e000 port 0xe2a3e300 irq 29
[ 0.494046] ata6: SATA max UDMA/133 abar m2048@0xe2a3e000 port 0xe2a3e380 irq 29
[ 0.494124] SSFDC read-only Flash Translation layer
[ 0.494141] MACsec IEEE 802.1AE
[ 0.494170] tun: Universal TUN/TAP device driver, 1.6
[ 0.494209] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 0.494211] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 0.494223] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 0.494225] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 0.494279] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 0.575205] fbcon: inteldrmfb (fb0) is primary device
[ 0.578322] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[ 0.660092] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 3c:97:0e:9b:28:1a
[ 0.660094] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 0.660131] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
[ 0.660148] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
[ 0.660148] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 0.660218] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.660219] ehci-pci: EHCI PCI platform driver
[ 0.660311] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.660435] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.660447] ehci-pci 0000:00:1a.0: debug port 2
[ 0.664356] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.664367] ehci-pci 0000:00:1a.0: irq 21, io mem 0xe2a3f000
[ 0.671032] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.671086] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
[ 0.671087] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.671088] usb usb1: Product: EHCI Host Controller
[ 0.671089] usb usb1: Manufacturer: Linux 4.18.3-gentoo ehci_hcd
[ 0.671090] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.671247] hub 1-0:1.0: USB hub found
[ 0.671253] hub 1-0:1.0: 3 ports detected
[ 0.671406] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.671491] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.671502] ehci-pci 0000:00:1d.0: debug port 2
[ 0.675401] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.675411] ehci-pci 0000:00:1d.0: irq 19, io mem 0xe2a40000
[ 0.682033] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.682085] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
[ 0.682086] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.682087] usb usb2: Product: EHCI Host Controller
[ 0.682088] usb usb2: Manufacturer: Linux 4.18.3-gentoo ehci_hcd
[ 0.682089] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.682261] hub 2-0:1.0: USB hub found
[ 0.682267] hub 2-0:1.0: 3 ports detected
[ 0.682355] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.682359] ohci-pci: OHCI PCI platform driver
[ 0.682367] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.682465] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.682548] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 0.683611] xhci_hcd 0000:00:14.0: hcc params 0x200071a1 hci version 0x100 quirks 0x000000000000b930
[ 0.683615] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.683740] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
[ 0.683741] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.683742] usb usb3: Product: xHCI Host Controller
[ 0.683743] usb usb3: Manufacturer: Linux 4.18.3-gentoo xhci-hcd
[ 0.683743] usb usb3: SerialNumber: 0000:00:14.0
[ 0.683841] hub 3-0:1.0: USB hub found
[ 0.683849] hub 3-0:1.0: 4 ports detected
[ 0.683942] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.683967] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 0.683969] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 0.683992] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.18
[ 0.683993] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.683994] usb usb4: Product: xHCI Host Controller
[ 0.683995] usb usb4: Manufacturer: Linux 4.18.3-gentoo xhci-hcd
[ 0.683996] usb usb4: SerialNumber: 0000:00:14.0
[ 0.684132] hub 4-0:1.0: USB hub found
[ 0.684142] hub 4-0:1.0: 4 ports detected
[ 0.684251] usbcore: registered new interface driver usblp
[ 0.684271] usbcore: registered new interface driver usb-storage
[ 0.684292] usbcore: registered new interface driver usbserial_generic
[ 0.684317] usbserial: USB Serial support registered for generic
[ 0.684326] usbcore: registered new interface driver usb_debug
[ 0.684331] usbserial: USB Serial support registered for debug
[ 0.684334] usbserial: USB Serial support registered for xhci_dbc
[ 0.684340] usbcore: registered new interface driver pl2303
[ 0.684344] usbserial: USB Serial support registered for pl2303
[ 0.684353] usbcore: registered new interface driver usb_serial_simple
[ 0.684359] usbserial: USB Serial support registered for carelink
[ 0.684367] usbserial: USB Serial support registered for zio
[ 0.684374] usbserial: USB Serial support registered for funsoft
[ 0.684401] usbserial: USB Serial support registered for flashloader
[ 0.684406] usbserial: USB Serial support registered for google
[ 0.684411] usbserial: USB Serial support registered for libtransistor
[ 0.684417] usbserial: USB Serial support registered for vivopay
[ 0.684422] usbserial: USB Serial support registered for moto_modem
[ 0.684426] usbserial: USB Serial support registered for motorola_tetra
[ 0.684431] usbserial: USB Serial support registered for novatel_gps
[ 0.684436] usbserial: USB Serial support registered for hp4x
[ 0.684443] usbserial: USB Serial support registered for suunto
[ 0.684451] usbserial: USB Serial support registered for siemens_mpi
[ 0.684490] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.686343] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.686346] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.686426] mousedev: PS/2 mouse device common for all mice
[ 0.686616] rtc_cmos 00:03: RTC can wake from S4
[ 0.686753] rtc_cmos 00:03: registered as rtc0
[ 0.686763] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.686887] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 0.687519] usbcore: registered new interface driver uvcvideo
[ 0.687520] USB Video Class driver (1.1.1)
[ 0.687587] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
[ 0.687650] device-mapper: multipath round-robin: version 1.2.0 loaded
[ 0.687650] device-mapper: multipath queue-length: version 0.2.0 loaded
[ 0.687651] device-mapper: multipath service-time: version 0.3.0 loaded
[ 0.687663] intel_pstate: Intel P-state driver initializing
[ 0.687838] sdhci: Secure Digital Host Controller Interface driver
[ 0.687839] sdhci: Copyright(c) Pierre Ossman
[ 0.687871] sdhci-pci 0000:02:00.0: SDHCI controller found [1180:e822] (rev 8)
[ 0.687983] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 0.688359] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes
[ 0.688581] mmc0: SDHCI controller on PCI [0000:02:00.0] using DMA
[ 0.688727] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.689096] usbcore: registered new interface driver usbhid
[ 0.689097] usbhid: USB HID core driver
[ 0.689352] thinkpad_acpi: ThinkPad ACPI Extras v0.26
[ 0.689353] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 0.689354] thinkpad_acpi: ThinkPad BIOS CBET4000 4.8-1777-gf3aa6e9319, EC G4HT39WW-3.22
[ 0.689355] thinkpad_acpi: Lenovo ThinkPad W530, model 2463A49
[ 0.689754] thinkpad_acpi: radio switch found; radios are enabled
[ 0.689882] thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode
[ 0.689899] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 0.689900] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 0.692012] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[ 0.692916] thinkpad_acpi: rfkill switch tpacpi_wwan_sw: radio is unblocked
[ 0.694722] thinkpad_acpi: warning: userspace override of important firmware LEDs is enabled
[ 0.694862] random: fast init done
[ 0.696572] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 0.696670] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 0.698437] thinkpad_acpi: battery 1 registered (start 0, stop 0)
[ 0.698442] battery: new extension: ThinkPad Battery Extension
[ 0.698500] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input7
[ 0.699328] pcieport 0000:00:01.0: can't derive routing for PCI INT B
[ 0.699329] snd_hda_intel 0000:01:00.1: PCI INT B: no GSI
[ 0.699333] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 0.699374] u32 classifier
[ 0.699375] Actions configured
[ 0.699777] Initializing XFRM netlink socket
[ 0.699912] NET: Registered protocol family 10
[ 0.700143] Segment Routing with IPv6
[ 0.700293] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 0.700431] NET: Registered protocol family 17
[ 0.700434] NET: Registered protocol family 15
[ 0.700441] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 0.700535] Bluetooth: RFCOMM socket layer initialized
[ 0.700539] Bluetooth: RFCOMM ver 1.11
[ 0.700541] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 0.700543] Bluetooth: HIDP socket layer initialized
[ 0.700557] l2tp_core: L2TP core driver, V2.0
[ 0.700557] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
[ 0.700562] l2tp_netlink: L2TP netlink interface
[ 0.700571] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
[ 0.700571] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
[ 0.700580] Key type dns_resolver registered
[ 0.700965] microcode: sig=0x306a9, pf=0x10, revision=0x20
[ 0.701021] microcode: Microcode Update Driver: v2.2.
[ 0.701028] AVX version of gcm_enc/dec engaged.
[ 0.701029] AES CTR mode by8 optimization enabled
[ 0.710736] sched_clock: Marking stable (710714649, 0)->(720414952, -9700303)
[ 0.710935] registered taskstats version 1
[ 0.710936] Loading compiled-in X.509 certificates
[ 0.710944] Unable to create integrity sysfs dir: -19
[ 0.711123] Magic number: 6:497:805
[ 0.805048] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.805830] ata1.00: ATA-9: WDC WD10JPVX-00JC3T0, 01.01A01, max UDMA/133
[ 0.805832] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 32), AA
[ 0.806695] ata1.00: configured for UDMA/133
[ 0.861596] mmc0: new high speed SDHC card at address aaaa
[ 0.861977] mmcblk0: mmc0:aaaa SB16G 14.8 GiB (ro)
[ 0.864410] mmcblk0: p1
[ 0.994088] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.002071] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.122793] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 1.122797] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.123374] hub 1-1:1.0: USB hub found
[ 1.123476] hub 1-1:1.0: 6 ports detected
[ 1.131584] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 1.131587] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.131998] hub 2-1:1.0: USB hub found
[ 1.132061] hub 2-1:1.0: 8 ports detected
[ 1.400099] usb 1-1.4: new full-speed USB device number 3 using ehci-pci
[ 1.402842] psmouse serio1: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 1.408069] usb 2-1.5: new low-speed USB device number 3 using ehci-pci
[ 1.416780] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input8
[ 1.425919] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops 0xffffffff822b1460)
[ 1.438482] snd_hda_codec_generic hdaudioC0D0: autoconfig for Generic: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 1.438485] snd_hda_codec_generic hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 1.438488] snd_hda_codec_generic hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 1.438489] snd_hda_codec_generic hdaudioC0D0: mono: mono_out=0x0
[ 1.438491] snd_hda_codec_generic hdaudioC0D0: inputs:
[ 1.438493] snd_hda_codec_generic hdaudioC0D0: Mic=0x18
[ 1.438495] snd_hda_codec_generic hdaudioC0D0: Internal Mic=0x12
[ 1.440037] tsc: Refined TSC clocksource calibration: 2693.877 MHz
[ 1.440049] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x26d4a6780c5, max_idle_ns: 440795312458 ns
[ 1.440090] clocksource: Switched to clocksource tsc
[ 1.443430] snd_hda_codec_generic hdaudioC0D3: ignore pin 0x7, too many assigned pins
[ 1.443432] snd_hda_codec_generic hdaudioC0D3: autoconfig for Generic: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line
[ 1.443433] snd_hda_codec_generic hdaudioC0D3: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 1.443433] snd_hda_codec_generic hdaudioC0D3: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 1.443434] snd_hda_codec_generic hdaudioC0D3: mono: mono_out=0x0
[ 1.443435] snd_hda_codec_generic hdaudioC0D3: dig-out=0x5/0x6
[ 1.443435] snd_hda_codec_generic hdaudioC0D3: inputs:
[ 1.444682] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 1.444716] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 1.444746] input: HDA Intel PCH HDMI as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 1.444778] input: HDA Intel PCH HDMI as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 1.445765] Console: switching to colour frame buffer device 240x67
[ 1.490788] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=21e6, bcdDevice= 1.12
[ 1.491492] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 1.592432] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.592433] usb 1-1.4: Product: BCM20702A0
[ 1.592434] usb 1-1.4: Manufacturer: Broadcom Corp
[ 1.592435] usb 1-1.4: SerialNumber: B8763FA80FE2
[ 1.593572] console [netcon0] enabled
[ 1.594693] usb 2-1.5: New USB device found, idVendor=04ca, idProduct=0061, bcdDevice= 1.00
[ 1.594944] scsi 0:0:0:0: Direct-Access ATA WDC WD10JPVX-00J 1A01 PQ: 0 ANSI: 5
[ 1.595109] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 1.595110] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.595111] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.595128] sd 0:0:0:0: [sda] Write Protect is off
[ 1.595129] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.595186] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.595888] netconsole: network logging started
[ 1.597382] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.598910] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 1.600039] usb 2-1.5: Product: USB Optical Mouse
[ 1.603603] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 1.604077] usb 2-1.5: Manufacturer: PixArt
[ 1.605618] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 1.606852] ALSA device list:
[ 1.608123] platform regulatory.0: Falling back to syfs fallback for: regulatory.db
[ 1.615145] #0: HDA Intel PCH at 0xe2a38000 irq 32
[ 1.616045] #5: ThinkPad Console Audio Control at EC reg 0x30, fw G4HT39WW-3.22
[ 1.619071] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/0003:04CA:0061.0001/input/input13
[ 1.620200] hid-generic 0003:04CA:0061.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:1d.0-1.5/input0
[ 1.646256] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.681105] usb 1-1.6: new high-speed USB device number 4 using ehci-pci
[ 1.769713] usb 1-1.6: New USB device found, idVendor=5986, idProduct=02d2, bcdDevice= 0.11
[ 1.770665] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.771594] usb 1-1.6: Product: Integrated Camera
[ 1.772520] usb 1-1.6: Manufacturer: Ricoh Company Ltd.
[ 1.774459] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:02d2)
[ 1.783428] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input14
[ 1.902265] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.905899] ata2.00: ATA-9: WDC WD20NPVZ-00WFZT0, 01.01A01, max UDMA/133
[ 1.908623] ata2.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 32), AA
[ 1.912376] ata2.00: configured for UDMA/133
[ 1.915383] scsi 1:0:0:0: Direct-Access ATA WDC WD20NPVZ-00W 1A01 PQ: 0 ANSI: 5
[ 1.917990] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 1.918069] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 1.920020] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 1.921009] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.923731] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.923767] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.992775] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 2.230603] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.247087] ata3.00: ATA-8: KINGSTON SMS200S3240G, 60AABBF0, max UDMA/133
[ 2.249877] ata3.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 2.257989] ata3.00: configured for UDMA/133
[ 2.261125] scsi 2:0:0:0: Direct-Access ATA KINGSTON SMS200S BBF0 PQ: 0 ANSI: 5
[ 2.263498] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 2.263741] sd 2:0:0:0: [sdc] 468862128 512-byte logical blocks: (240 GB/224 GiB)
[ 2.269209] sd 2:0:0:0: [sdc] Write Protect is off
[ 2.272015] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.272065] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.277222] sdc: sdc1 sdc2 sdc3
[ 2.278560] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 2.574665] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.886586] ata5: SATA link down (SStatus 0 SControl 300)
[ 3.198619] ata6: SATA link down (SStatus 0 SControl 300)
[ 3.203141] Freeing unused kernel memory: 1312K
[ 3.211206] Write protecting the kernel read-only data: 22528k
[ 3.214568] Freeing unused kernel memory: 1972K
[ 3.216767] Freeing unused kernel memory: 392K
[ 3.713042] snd_hda_intel 0000:01:00.1: azx_get_response timeout, switching to polling mode: last cmd=0x000f0001
[ 3.823048] snd_hda_codec_generic hdaudioC1D0: ignore pin 0x7, too many assigned pins
[ 3.823053] snd_hda_codec_generic hdaudioC1D0: autoconfig for Generic: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line
[ 3.823055] snd_hda_codec_generic hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 3.823057] snd_hda_codec_generic hdaudioC1D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 3.823058] snd_hda_codec_generic hdaudioC1D0: mono: mono_out=0x0
[ 3.823060] snd_hda_codec_generic hdaudioC1D0: dig-out=0x5/0x6
[ 3.823061] snd_hda_codec_generic hdaudioC1D0: inputs:
[ 3.875398] input: HDA NVidia HDMI as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
[ 3.875506] input: HDA NVidia HDMI as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
[ 4.764245] fuse init (API version 7.27)
[ 5.065333] random: lvm: uninitialized urandom read (4 bytes read)
[ 5.255712] lvm (5020) used greatest stack depth: 13912 bytes left
[ 6.505715] random: crng init done
[ 13.049995] cryptsetup (5033) used greatest stack depth: 13640 bytes left
[ 13.162941] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
[ 13.171674] init (5086) used greatest stack depth: 13480 bytes left
[ 13.208596] test (5096) used greatest stack depth: 12952 bytes left
[ 14.886077] udevd[5702]: starting version 3.2.5
[ 14.916373] udevd[5702]: specified group 'colord' unknown
[ 14.951041] udevd[5703]: starting eudev-3.2.5
[ 15.021102] udevd[5703]: specified group 'colord' unknown
[ 15.037682] udevadm (5735) used greatest stack depth: 12904 bytes left
[ 15.067807] Intel(R) Wireless WiFi driver for Linux
[ 15.067808] Copyright(c) 2003- 2015 Intel Corporation
[ 15.094612] iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[ 15.100192] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 15.100194] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[ 15.100195] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[ 15.100197] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0
[ 15.134406] usbcore: registered new interface driver btusb
[ 15.135166] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 15.155645] hdaps: supported laptop not found!
[ 15.155646] hdaps: driver init failed (ret=-19)!
[ 15.207692] i2c /dev entries driver
[ 15.242656] Bluetooth: hci0: BCM: chip id 63
[ 15.243651] Bluetooth: hci0: BCM: features 0x07
[ 15.249315] usbcore: registered new interface driver cdc_ether
[ 15.259717] Bluetooth: hci0: BCM20702A
[ 15.260745] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000
[ 15.261109] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-21e6.hcd failed with error -2
[ 15.261111] bluetooth hci0: Falling back to syfs fallback for: brcm/BCM20702A1-0a5c-21e6.hcd
[ 15.265822] usbcore: registered new interface driver cdc_acm
[ 15.265823] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 15.281301] usbcore: registered new interface driver ipheth
[ 15.296421] usbcore: registered new interface driver cdc_subset
[ 15.324226] usbcore: registered new interface driver rndis_host
[ 15.859481] EXT4-fs (dm-3): re-mounted. Opts: discard
[ 15.995326] Adding 4194300k swap on /dev/mapper/vg-swap. Priority:-2 extents:1 across:4194300k SS
[ 16.494319] ip (6731) used greatest stack depth: 12488 bytes left
[ 18.415718] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 18.707593] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 18.784244] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 18.784727] ip (7032) used greatest stack depth: 11648 bytes left
[ 20.633449] usb 1-1.4: USB disconnect, device number 3
[ 22.299748] wlan0: authenticate with 64:d1:54:78:39:b7
[ 22.302316] wlan0: send auth to 64:d1:54:78:39:b7 (try 1/3)
[ 22.342427] wlan0: authenticated
[ 22.343025] wlan0: associate with 64:d1:54:78:39:b7 (try 1/3)
[ 22.344433] wlan0: RX AssocResp from 64:d1:54:78:39:b7 (capab=0x431 status=0 aid=1)
[ 22.348313] wlan0: associated
[ 22.358495] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 22.457126] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)
[ 40.164730] virbr1: port 1(virbr1-nic) entered blocking state
[ 40.164732] virbr1: port 1(virbr1-nic) entered disabled state
[ 40.164772] device virbr1-nic entered promiscuous mode
[ 40.211443] virbr1: port 1(virbr1-nic) entered blocking state
[ 40.211445] virbr1: port 1(virbr1-nic) entered listening state
[ 40.224365] virbr1: port 1(virbr1-nic) entered disabled state
[ 40.225211] virbr2: port 1(virbr2-nic) entered blocking state
[ 40.225213] virbr2: port 1(virbr2-nic) entered disabled state
[ 40.225244] device virbr2-nic entered promiscuous mode
[ 40.249484] virbr2: port 1(virbr2-nic) entered blocking state
[ 40.249487] virbr2: port 1(virbr2-nic) entered listening state
[ 40.249740] virbr2: port 1(virbr2-nic) entered disabled state
[ 40.251110] virbr0: port 1(virbr0-nic) entered blocking state
[ 40.251112] virbr0: port 1(virbr0-nic) entered disabled state
[ 40.251166] device virbr0-nic entered promiscuous mode
[ 40.302270] virbr0: port 1(virbr0-nic) entered blocking state
[ 40.302273] virbr0: port 1(virbr0-nic) entered listening state
[ 40.322797] virbr0: port 1(virbr0-nic) entered disabled state
[ 62.432050] cfg80211: failed to load regulatory.db
[ 62.432067] cfg80211: failed to load regulatory.db
[ 62.432074] cfg80211: failed to load regulatory.db
[ 62.432130] cfg80211: failed to load regulatory.db
[ 78.816181] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-21e6.hcd not found
[ 78.816249] Bluetooth: hci0: sending frame failed (-19)
[ 80.864093] Bluetooth: hci0: command 0x1009 tx timeout
[ 89.056096] Bluetooth: hci0: BCM: Reading device address failed (-110)
[ 89.056138] Bluetooth: hci0: sending frame failed (-19)