| [ 0.000000] Linux version 5.0.0-trunk-amd64 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-3)) #1 SMP Debian 5.0.2-1~exp1 (2019-03-18) |
| [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-5.0.0-trunk-amd64 root=/dev/mapper/TP--T430s--vg-root ro iomem=relaxed |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' |
| [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 |
| [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. |
| [ 0.000000] BIOS-provided physical RAM map: |
| [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ff21fff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000007ff22000-0x00000000829fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000047b5fffff] usable |
| [ 0.000000] NX (Execute Disable) protection: active |
| [ 0.000000] SMBIOS 2.7 present. |
| [ 0.000000] DMI: LENOVO 23532NU/23532NU, BIOS CBET4000 4.9-1475-g2b8789bb3b 04/30/2019 |
| [ 0.000000] tsc: Fast TSC calibration using PIT |
| [ 0.000000] tsc: Detected 2893.387 MHz processor |
| [ 0.002003] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| [ 0.002005] e820: remove [mem 0x000a0000-0x000fffff] usable |
| [ 0.002008] last_pfn = 0x47b600 max_arch_pfn = 0x400000000 |
| [ 0.002012] MTRR default type: write-back |
| [ 0.002013] MTRR fixed ranges enabled: |
| [ 0.002013] 00000-9FFFF write-back |
| [ 0.002014] A0000-BFFFF uncachable |
| [ 0.002015] C0000-FFFFF write-back |
| [ 0.002015] MTRR variable ranges enabled: |
| [ 0.002017] 0 base 080000000 mask FC0000000 uncachable |
| [ 0.002018] 1 base 0C0000000 mask FF0000000 uncachable |
| [ 0.002018] 2 base 0D0000000 mask FF0000000 write-combining |
| [ 0.002019] 3 base 0E0000000 mask FE0000000 uncachable |
| [ 0.002019] 4 disabled |
| [ 0.002020] 5 disabled |
| [ 0.002020] 6 disabled |
| [ 0.002020] 7 disabled |
| [ 0.002021] 8 disabled |
| [ 0.002021] 9 disabled |
| [ 0.002766] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT |
| [ 0.003125] last_pfn = 0x7ff22 max_arch_pfn = 0x400000000 |
| [ 0.012553] Base memory trampoline at [(____ptrval____)] 99000 size 24576 |
| [ 0.012557] BRK [0x23bc01000, 0x23bc01fff] PGTABLE |
| [ 0.012559] BRK [0x23bc02000, 0x23bc02fff] PGTABLE |
| [ 0.012560] BRK [0x23bc03000, 0x23bc03fff] PGTABLE |
| [ 0.012590] BRK [0x23bc04000, 0x23bc04fff] PGTABLE |
| [ 0.012592] BRK [0x23bc05000, 0x23bc05fff] PGTABLE |
| [ 0.012688] BRK [0x23bc06000, 0x23bc06fff] PGTABLE |
| [ 0.012712] BRK [0x23bc07000, 0x23bc07fff] PGTABLE |
| [ 0.012884] RAMDISK: [mem 0x31453000-0x34a20fff] |
| [ 0.012890] ACPI: Early table checksum verification disabled |
| [ 0.012948] ACPI: RSDP 0x00000000000F6770 000024 (v02 COREv4) |
| [ 0.012951] ACPI: XSDT 0x000000007FF480E0 00005C (v01 COREv4 COREBOOT 00000000 CORE 20190108) |
| [ 0.012956] ACPI: FACP 0x000000007FF4BB20 0000F4 (v04 COREv4 COREBOOT 00000000 CORE 20190108) |
| [ 0.012960] ACPI: DSDT 0x000000007FF48280 00389F (v02 COREv4 COREBOOT 20110725 INTL 20190108) |
| [ 0.012963] ACPI: FACS 0x000000007FF48240 000040 |
| [ 0.012965] ACPI: FACS 0x000000007FF48240 000040 |
| [ 0.012967] ACPI: SSDT 0x000000007FF4BC20 001A32 (v02 COREv4 COREBOOT 0000002A CORE 20190108) |
| [ 0.012970] ACPI: MCFG 0x000000007FF4D660 00003C (v01 COREv4 COREBOOT 00000000 CORE 20190108) |
| [ 0.012972] ACPI: TCPA 0x000000007FF4D6A0 000032 (v02 COREv4 COREBOOT 00000000 CORE 20190108) |
| [ 0.012975] ACPI: APIC 0x000000007FF4D6E0 00006C (v02 COREv4 COREBOOT 00000000 CORE 20190108) |
| [ 0.012977] ACPI: DMAR 0x000000007FF4D750 0000D0 (v01 COREv4 COREBOOT 00000000 CORE 20190108) |
| [ 0.012979] ACPI: HPET 0x000000007FF4F820 000038 (v01 COREv4 COREBOOT 00000000 CORE 20190108) |
| [ 0.012986] ACPI: Local APIC address 0xfee00000 |
| [ 0.013059] No NUMA configuration found |
| [ 0.013060] Faking a node at [mem 0x0000000000000000-0x000000047b5fffff] |
| [ 0.013063] NODE_DATA(0) allocated [mem 0x47b5ee000-0x47b5f2fff] |
| [ 0.013090] Zone ranges: |
| [ 0.013091] DMA [mem 0x0000000000001000-0x0000000000ffffff] |
| [ 0.013092] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] |
| [ 0.013093] Normal [mem 0x0000000100000000-0x000000047b5fffff] |
| [ 0.013094] Device empty |
| [ 0.013095] Movable zone start for each node |
| [ 0.013096] Early memory node ranges |
| [ 0.013097] node 0: [mem 0x0000000000001000-0x000000000009efff] |
| [ 0.013098] node 0: [mem 0x0000000000100000-0x000000007ff21fff] |
| [ 0.013098] node 0: [mem 0x0000000100000000-0x000000047b5fffff] |
| [ 0.013109] Zeroed struct page in unavailable ranges: 320 pages |
| [ 0.013110] Initmem setup node 0 [mem 0x0000000000001000-0x000000047b5fffff] |
| [ 0.013112] On node 0 totalpages: 4175040 |
| [ 0.013113] DMA zone: 64 pages used for memmap |
| [ 0.013113] DMA zone: 21 pages reserved |
| [ 0.013114] DMA zone: 3998 pages, LIFO batch:0 |
| [ 0.013209] DMA32 zone: 8125 pages used for memmap |
| [ 0.013210] DMA32 zone: 519970 pages, LIFO batch:63 |
| [ 0.027027] Normal zone: 57048 pages used for memmap |
| [ 0.027029] Normal zone: 3651072 pages, LIFO batch:63 |
| [ 0.109856] Reserving Intel graphics memory at [mem 0x80a00000-0x829fffff] |
| [ 0.110102] ACPI: PM-Timer IO Port: 0x508 |
| [ 0.110104] ACPI: Local APIC address 0xfee00000 |
| [ 0.110119] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 |
| [ 0.110121] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) |
| [ 0.110123] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) |
| [ 0.110124] ACPI: IRQ0 used by override. |
| [ 0.110125] ACPI: IRQ9 used by override. |
| [ 0.110127] Using ACPI (MADT) for SMP configuration information |
| [ 0.110128] ACPI: HPET id: 0x8086a701 base: 0xfed00000 |
| [ 0.110133] smpboot: Allowing 4 CPUs, 0 hotplug CPUs |
| [ 0.110142] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] |
| [ 0.110143] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] |
| [ 0.110144] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] |
| [ 0.110145] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] |
| [ 0.110146] PM: Registered nosave memory: [mem 0x7ff22000-0x829fffff] |
| [ 0.110147] PM: Registered nosave memory: [mem 0x82a00000-0xefffffff] |
| [ 0.110148] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff] |
| [ 0.110148] PM: Registered nosave memory: [mem 0xf4000000-0xfed3ffff] |
| [ 0.110149] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff] |
| [ 0.110150] PM: Registered nosave memory: [mem 0xfed45000-0xfed8ffff] |
| [ 0.110150] PM: Registered nosave memory: [mem 0xfed90000-0xfed91fff] |
| [ 0.110151] PM: Registered nosave memory: [mem 0xfed92000-0xffffffff] |
| [ 0.110153] [mem 0x82a00000-0xefffffff] available for PCI devices |
| [ 0.110154] Booting paravirtualized kernel on bare hardware |
| [ 0.110157] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns |
| [ 0.206042] random: get_random_bytes called from start_kernel+0x93/0x501 with crng_init=0 |
| [ 0.206048] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 |
| [ 0.206209] percpu: Embedded 44 pages/cpu @(____ptrval____) s142936 r8192 d29096 u524288 |
| [ 0.206214] pcpu-alloc: s142936 r8192 d29096 u524288 alloc=1*2097152 |
| [ 0.206215] pcpu-alloc: [0] 0 1 2 3 |
| [ 0.206230] Built 1 zonelists, mobility grouping on. Total pages: 4109782 |
| [ 0.206231] Policy zone: Normal |
| [ 0.206233] Kernel command line: BOOT_IMAGE=/vmlinuz-5.0.0-trunk-amd64 root=/dev/mapper/TP--T430s--vg-root ro iomem=relaxed |
| [ 0.209310] Calgary: detecting Calgary via BIOS EBDA area |
| [ 0.209316] Calgary: Unable to locate Rio Grande table in EBDA - bailing! |
| [ 0.247870] Memory: 16291324K/16700160K available (10243K kernel code, 1167K rwdata, 3244K rodata, 1580K init, 2352K bss, 408836K reserved, 0K cma-reserved) |
| [ 0.247973] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 |
| [ 0.247978] Kernel/User page tables isolation: enabled |
| [ 0.247990] ftrace: allocating 31966 entries in 125 pages |
| [ 0.259192] rcu: Hierarchical RCU implementation. |
| [ 0.259194] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4. |
| [ 0.259195] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. |
| [ 0.259196] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 |
| [ 0.261944] NR_IRQS: 33024, nr_irqs: 456, preallocated irqs: 16 |
| [ 0.263692] Console: colour VGA+ 80x25 |
| [ 0.269040] printk: console [tty0] enabled |
| [ 0.269108] ACPI: Core revision 20181213 |
| [ 0.269298] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns |
| [ 0.269379] hpet clockevent registered |
| [ 0.269383] APIC: Switch to symmetric I/O mode setup |
| [ 0.269440] DMAR: Host address width 36 |
| [ 0.269495] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 |
| [ 0.269556] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a |
| [ 0.269625] DMAR: RMRR base: 0x00000080800000 end: 0x000000829fffff |
| [ 0.269683] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 |
| [ 0.269742] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a |
| [ 0.269814] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 |
| [ 0.269872] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 |
| [ 0.269925] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. |
| [ 0.270386] DMAR-IR: Enabled IRQ remapping in x2apic mode |
| [ 0.270446] x2apic enabled |
| [ 0.270505] Switched APIC routing to cluster x2apic. |
| [ 0.270984] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 |
| [ 0.289384] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x29b4dc44a2a, max_idle_ns: 440795292927 ns |
| [ 0.289466] Calibrating delay loop (skipped), value calculated using timer frequency.. 5786.77 BogoMIPS (lpj=11573548) |
| [ 0.289541] pid_max: default: 32768 minimum: 301 |
| [ 0.289618] LSM: Security Framework initializing |
| [ 0.289675] Yama: disabled by default; enable with sysctl kernel.yama.* |
| [ 0.289747] AppArmor: AppArmor initialized |
| [ 0.291934] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) |
| [ 0.293088] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) |
| [ 0.293204] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) |
| [ 0.293295] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) |
| [ 0.293628] mce: CPU supports 7 MCE banks |
| [ 0.293693] mce: CPU0: Thermal monitoring enabled (TM1) |
| [ 0.293756] process: using mwait in idle threads |
| [ 0.293815] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 |
| [ 0.293873] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 |
| [ 0.293932] Spectre V2 : Mitigation: Full generic retpoline |
| [ 0.293989] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch |
| [ 0.294058] Spectre V2 : Enabling Restricted Speculation for firmware calls |
| [ 0.294124] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier |
| [ 0.294193] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl |
| [ 0.294254] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp |
| [ 0.294472] Freeing SMP alternatives memory: 24K |
| [ 0.296039] TSC deadline timer enabled |
| [ 0.296042] smpboot: CPU0: Intel(R) Core(TM) i7-3520M CPU @ 2.90GHz (family: 0x6, model: 0x3a, stepping: 0x9) |
| [ 0.296192] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. |
| [ 0.296282] ... version: 3 |
| [ 0.296337] ... bit width: 48 |
| [ 0.296390] ... generic registers: 4 |
| [ 0.296445] ... value mask: 0000ffffffffffff |
| [ 0.296503] ... max period: 00007fffffffffff |
| [ 0.296561] ... fixed-purpose events: 3 |
| [ 0.296617] ... event mask: 000000070000000f |
| [ 0.296704] rcu: Hierarchical SRCU implementation. |
| [ 0.297066] random: crng done (trusting CPU's manufacturer) |
| [ 0.297307] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. |
| [ 0.297402] smp: Bringing up secondary CPUs ... |
| [ 0.297455] x86: Booting SMP configuration: |
| [ 0.297455] .... node #0, CPUs: #1 #2 #3 |
| [ 0.301505] smp: Brought up 1 node, 4 CPUs |
| [ 0.301571] smpboot: Max logical packages: 1 |
| [ 0.301627] smpboot: Total of 4 processors activated (23147.09 BogoMIPS) |
| [ 0.304716] devtmpfs: initialized |
| [ 0.304716] x86/mm: Memory block size: 128MB |
| [ 0.306305] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns |
| [ 0.306305] futex hash table entries: 1024 (order: 4, 65536 bytes) |
| [ 0.306305] pinctrl core: initialized pinctrl subsystem |
| [ 0.306305] NET: Registered protocol family 16 |
| [ 0.306305] audit: initializing netlink subsys (disabled) |
| [ 0.306305] audit: type=2000 audit(1556660700.036:1): state=initialized audit_enabled=0 res=1 |
| [ 0.306305] cpuidle: using governor ladder |
| [ 0.306305] cpuidle: using governor menu |
| [ 0.306305] ACPI: bus type PCI registered |
| [ 0.306305] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 |
| [ 0.306305] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) |
| [ 0.306305] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 |
| [ 0.306305] PCI: Using configuration type 1 for base access |
| [ 0.306305] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on |
| [ 0.309500] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages |
| [ 0.309531] ACPI: Added _OSI(Module Device) |
| [ 0.309570] ACPI: Added _OSI(Processor Device) |
| [ 0.309627] ACPI: Added _OSI(3.0 _SCP Extensions) |
| [ 0.309684] ACPI: Added _OSI(Processor Aggregator Device) |
| [ 0.309741] ACPI: Added _OSI(Linux-Dell-Video) |
| [ 0.309798] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) |
| [ 0.309856] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) |
| [ 0.311874] ACPI: 2 ACPI AML tables successfully acquired and loaded |
| [ 0.312723] ACPI: EC: EC started |
| [ 0.312778] ACPI: EC: interrupt blocked |
| [ 0.313103] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC |
| [ 0.313461] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62 |
| [ 0.313530] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions |
| [ 0.313599] ACPI: Interpreter enabled |
| [ 0.313668] ACPI: (supports S0 S3 S4 S5) |
| [ 0.313723] ACPI: Using IOAPIC for interrupt routing |
| [ 0.313793] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| [ 0.313968] ACPI: Enabled 1 GPEs in block 00 to 3F |
| [ 0.317133] ACPI: Power Resource [FPWR] (off) |
| [ 0.317425] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) |
| [ 0.317461] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] |
| [ 0.317565] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] |
| [ 0.317644] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge |
| [ 0.317757] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff window] (conflicts with Video ROM [mem 0x000c0000-0x000cf1ff]) |
| [ 0.317834] acpi PNP0A08:00: ignoring host bridge window [mem 0x000d0000-0x000d3fff window] (conflicts with Adapter ROM [mem 0x000cf800-0x000d05ff]) |
| [ 0.318039] PCI host bridge to bus 0000:00 |
| [ 0.318095] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] |
| [ 0.318155] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] |
| [ 0.318216] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] |
| [ 0.318285] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] |
| [ 0.318352] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] |
| [ 0.318420] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] |
| [ 0.318489] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] |
| [ 0.318558] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] |
| [ 0.318628] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] |
| [ 0.318699] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] |
| [ 0.318767] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] |
| [ 0.318836] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window] |
| [ 0.318905] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window] |
| [ 0.318974] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window] |
| [ 0.319043] pci_bus 0000:00: root bus resource [mem 0x82a00000-0xefffffff window] |
| [ 0.319113] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] |
| [ 0.319183] pci_bus 0000:00: root bus resource [bus 00-ff] |
| [ 0.319246] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000 |
| [ 0.319319] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000 |
| [ 0.319328] pci 0000:00:02.0: reg 0x10: [mem 0xe1400000-0xe17fffff 64bit] |
| [ 0.319332] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref] |
| [ 0.319336] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f] |
| [ 0.319395] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000 |
| [ 0.319403] pci 0000:00:04.0: reg 0x10: [mem 0xe1b30000-0xe1b37fff 64bit] |
| [ 0.319485] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330 |
| [ 0.319508] pci 0000:00:14.0: reg 0x10: [mem 0xe1b20000-0xe1b2ffff 64bit] |
| [ 0.319574] pci 0000:00:14.0: PME# supported from D3hot D3cold |
| [ 0.319639] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000 |
| [ 0.319659] pci 0000:00:19.0: reg 0x10: [mem 0xe1b00000-0xe1b1ffff] |
| [ 0.319666] pci 0000:00:19.0: reg 0x14: [mem 0xe1b3c000-0xe1b3cfff] |
| [ 0.319674] pci 0000:00:19.0: reg 0x18: [io 0x3040-0x305f] |
| [ 0.319732] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold |
| [ 0.319791] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 |
| [ 0.319811] pci 0000:00:1a.0: reg 0x10: [mem 0xe1b3f000-0xe1b3f3ff] |
| [ 0.319890] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold |
| [ 0.319955] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300 |
| [ 0.319975] pci 0000:00:1b.0: reg 0x10: [mem 0xe1b38000-0xe1b3bfff 64bit] |
| [ 0.320045] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold |
| [ 0.320112] pci 0000:00:1c.0: [8086:1e12] type 01 class 0x060400 |
| [ 0.320251] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold |
| [ 0.320342] pci 0000:00:1c.1: [8086:1e14] type 01 class 0x060400 |
| [ 0.320503] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold |
| [ 0.320595] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 |
| [ 0.320616] pci 0000:00:1d.0: reg 0x10: [mem 0xe1b40000-0xe1b403ff] |
| [ 0.320694] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold |
| [ 0.320760] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100 |
| [ 0.320915] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601 |
| [ 0.320934] pci 0000:00:1f.2: reg 0x10: [io 0x3080-0x3087] |
| [ 0.320942] pci 0000:00:1f.2: reg 0x14: [io 0x3090-0x3093] |
| [ 0.320950] pci 0000:00:1f.2: reg 0x18: [io 0x3088-0x308f] |
| [ 0.320957] pci 0000:00:1f.2: reg 0x1c: [io 0x3094-0x3097] |
| [ 0.320964] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f] |
| [ 0.320972] pci 0000:00:1f.2: reg 0x24: [mem 0xe1b3e000-0xe1b3e7ff] |
| [ 0.321014] pci 0000:00:1f.2: PME# supported from D3hot |
| [ 0.321072] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500 |
| [ 0.321090] pci 0000:00:1f.3: reg 0x10: [mem 0xe1b41000-0xe1b410ff 64bit] |
| [ 0.321109] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f] |
| [ 0.321178] pci 0000:00:1f.6: [8086:1e24] type 00 class 0x118000 |
| [ 0.321201] pci 0000:00:1f.6: reg 0x10: [mem 0xe1b3d000-0xe1b3dfff 64bit] |
| [ 0.321416] pci 0000:01:00.0: [14e4:43a0] type 00 class 0x028000 |
| [ 0.321478] pci 0000:01:00.0: reg 0x10: [mem 0xe1a00000-0xe1a07fff 64bit] |
| [ 0.321506] pci 0000:01:00.0: reg 0x18: [mem 0xe1800000-0xe19fffff 64bit] |
| [ 0.321712] pci 0000:01:00.0: supports D1 D2 |
| [ 0.321713] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.321936] pci 0000:00:1c.0: PCI bridge to [bus 01] |
| [ 0.322001] pci 0000:00:1c.0: bridge window [mem 0xe1800000-0xe1afffff] |
| [ 0.322145] pci 0000:02:00.0: [1180:e822] type 00 class 0x080500 |
| [ 0.322184] pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz. |
| [ 0.322495] pci 0000:02:00.0: reg 0x10: [mem 0xe0800000-0xe08000ff] |
| [ 0.322803] pci 0000:02:00.0: supports D1 D2 |
| [ 0.322803] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.323033] pci 0000:00:1c.1: PCI bridge to [bus 02] |
| [ 0.323093] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff] |
| [ 0.323098] pci 0000:00:1c.1: bridge window [mem 0xe0000000-0xe08fffff] |
| [ 0.323106] pci 0000:00:1c.1: bridge window [mem 0xe0c00000-0xe13fffff 64bit pref] |
| [ 0.323237] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.323333] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.323426] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.323519] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.323610] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.323700] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.323792] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.323884] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.324477] ACPI: EC: interrupt unblocked |
| [ 0.324548] ACPI: EC: event unblocked |
| [ 0.324620] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62 |
| [ 0.324687] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events |
| [ 0.324798] pci 0000:00:02.0: vgaarb: setting as boot VGA device |
| [ 0.324798] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none |
| [ 0.324798] pci 0000:00:02.0: vgaarb: bridge control possible |
| [ 0.324798] vgaarb: loaded |
| [ 0.324798] pps_core: LinuxPPS API ver. 1 registered |
| [ 0.324798] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> |
| [ 0.324798] PTP clock support registered |
| [ 0.324798] EDAC MC: Ver: 3.0.0 |
| [ 0.325481] PCI: Using ACPI for IRQ routing |
| [ 0.327012] PCI: pci_cache_line_size set to 64 bytes |
| [ 0.327536] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] |
| [ 0.327538] e820: reserve RAM buffer [mem 0x7ff22000-0x7fffffff] |
| [ 0.327538] e820: reserve RAM buffer [mem 0x47b600000-0x47bffffff] |
| [ 0.327611] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 |
| [ 0.327611] hpet0: 8 comparators, 64-bit 14.318180 MHz counter |
| [ 0.329476] clocksource: Switched to clocksource tsc-early |
| [ 0.337589] VFS: Disk quotas dquot_6.6.0 |
| [ 0.337660] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) |
| [ 0.337806] AppArmor: AppArmor Filesystem Enabled |
| [ 0.337876] pnp: PnP ACPI init |
| [ 0.338050] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved |
| [ 0.338110] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved |
| [ 0.338169] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved |
| [ 0.338228] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved |
| [ 0.338288] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved |
| [ 0.338347] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved |
| [ 0.338407] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved |
| [ 0.338466] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved |
| [ 0.338526] system 00:00: [mem 0x20000000-0x201fffff] could not be reserved |
| [ 0.338586] system 00:00: [mem 0x40000000-0x401fffff] could not be reserved |
| [ 0.338649] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) |
| [ 0.339068] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved |
| [ 0.339131] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) |
| [ 0.339161] system 00:02: [io 0x0500-0x057f] has been reserved |
| [ 0.339220] system 00:02: [io 0x0480-0x04bf] has been reserved |
| [ 0.339281] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) |
| [ 0.339296] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) |
| [ 0.339318] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) |
| [ 0.339337] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active) |
| [ 0.339356] pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active) |
| [ 0.339371] pnp: PnP ACPI: found 7 devices |
| [ 0.344907] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns |
| [ 0.345010] pci 0000:00:1c.0: PCI bridge to [bus 01] |
| [ 0.345073] pci 0000:00:1c.0: bridge window [mem 0xe1800000-0xe1afffff] |
| [ 0.345143] pci 0000:00:1c.1: PCI bridge to [bus 02] |
| [ 0.345201] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff] |
| [ 0.345263] pci 0000:00:1c.1: bridge window [mem 0xe0000000-0xe08fffff] |
| [ 0.345326] pci 0000:00:1c.1: bridge window [mem 0xe0c00000-0xe13fffff 64bit pref] |
| [ 0.345403] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] |
| [ 0.345404] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] |
| [ 0.345405] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] |
| [ 0.345406] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] |
| [ 0.345407] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window] |
| [ 0.345408] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window] |
| [ 0.345409] pci_bus 0000:00: resource 10 [mem 0x000d4000-0x000d7fff window] |
| [ 0.345410] pci_bus 0000:00: resource 11 [mem 0x000d8000-0x000dbfff window] |
| [ 0.345411] pci_bus 0000:00: resource 12 [mem 0x000dc000-0x000dffff window] |
| [ 0.345411] pci_bus 0000:00: resource 13 [mem 0x000e0000-0x000e3fff window] |
| [ 0.345412] pci_bus 0000:00: resource 14 [mem 0x000e4000-0x000e7fff window] |
| [ 0.345413] pci_bus 0000:00: resource 15 [mem 0x000e8000-0x000ebfff window] |
| [ 0.345414] pci_bus 0000:00: resource 16 [mem 0x000ec000-0x000effff window] |
| [ 0.345415] pci_bus 0000:00: resource 17 [mem 0x000f0000-0x000fffff window] |
| [ 0.345416] pci_bus 0000:00: resource 18 [mem 0x82a00000-0xefffffff window] |
| [ 0.345417] pci_bus 0000:00: resource 19 [mem 0xfed40000-0xfed44fff window] |
| [ 0.345418] pci_bus 0000:01: resource 1 [mem 0xe1800000-0xe1afffff] |
| [ 0.345419] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] |
| [ 0.345420] pci_bus 0000:02: resource 1 [mem 0xe0000000-0xe08fffff] |
| [ 0.345421] pci_bus 0000:02: resource 2 [mem 0xe0c00000-0xe13fffff 64bit pref] |
| [ 0.345488] NET: Registered protocol family 2 |
| [ 0.345691] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes) |
| [ 0.345804] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) |
| [ 0.346046] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) |
| [ 0.346208] TCP: Hash tables configured (established 131072 bind 65536) |
| [ 0.346299] UDP hash table entries: 8192 (order: 6, 262144 bytes) |
| [ 0.346391] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) |
| [ 0.346510] NET: Registered protocol family 1 |
| [ 0.346567] NET: Registered protocol family 44 |
| [ 0.346631] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] |
| [ 0.347394] PCI: CLS 64 bytes, default 64 |
| [ 0.347429] Unpacking initramfs... |
| [ 1.052724] Freeing initrd memory: 55096K |
| [ 1.069482] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) |
| [ 1.069558] software IO TLB: mapped [mem 0x7bf22000-0x7ff22000] (64MB) |
| [ 1.070169] Initialise system trusted keyrings |
| [ 1.070270] workingset: timestamp_bits=40 max_order=22 bucket_order=0 |
| [ 1.071341] zbud: loaded |
| [ 1.237753] Key type asymmetric registered |
| [ 1.237813] Asymmetric key parser 'x509' registered |
| [ 1.237882] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) |
| [ 1.237978] io scheduler mq-deadline registered |
| [ 1.238315] pcieport 0000:00:1c.0: Signaling PME with IRQ 26 |
| [ 1.238562] pcieport 0000:00:1c.1: Signaling PME with IRQ 27 |
| [ 1.238644] pciehp 0000:00:1c.1:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+ |
| [ 1.238834] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 |
| [ 1.238906] intel_idle: MWAIT substates: 0x21120 |
| [ 1.238906] intel_idle: v0.4.1 model 0x3A |
| [ 1.239084] intel_idle: lapic_timer_reliable_states 0xffffffff |
| [ 1.239592] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
| [ 1.240124] Linux agpgart interface v0.103 |
| [ 1.240218] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de> |
| [ 1.240278] AMD-Vi: AMD IOMMUv2 functionality not available on this system |
| [ 1.240582] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 |
| [ 1.242332] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| [ 1.242393] serio: i8042 AUX port at 0x60,0x64 irq 12 |
| [ 1.242587] mousedev: PS/2 mouse device common for all mice |
| [ 1.242679] rtc_cmos 00:03: RTC can wake from S4 |
| [ 1.242887] rtc_cmos 00:03: registered as rtc0 |
| [ 1.242956] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs |
| [ 1.243044] intel_pstate: Intel P-state driver initializing |
| [ 1.243297] ledtrig-cpu: registered to indicate activity on CPUs |
| [ 1.243880] NET: Registered protocol family 10 |
| [ 1.244188] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 |
| [ 1.261265] Segment Routing with IPv6 |
| [ 1.261380] mip6: Mobile IPv6 |
| [ 1.261448] NET: Registered protocol family 17 |
| [ 1.261648] mpls_gso: MPLS GSO support |
| [ 1.262210] microcode: sig=0x306a9, pf=0x10, revision=0x20 |
| [ 1.262431] microcode: Microcode Update Driver: v2.2. |
| [ 1.262459] sched_clock: Marking stable (1255084866, 7334964)->(1267842550, -5422720) |
| [ 1.264516] registered taskstats version 1 |
| [ 1.264572] Loading compiled-in X.509 certificates |
| [ 1.295977] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' |
| [ 1.296059] Loaded X.509 cert 'Debian Secure Boot Signer: 00a7468def' |
| [ 1.296130] zswap: loaded using pool lzo/zbud |
| [ 1.296272] AppArmor: AppArmor sha1 policy hashing enabled |
| [ 1.296605] rtc_cmos 00:03: setting system clock to 2019-04-30T21:45:01 UTC (1556660701) |
| [ 1.297286] Freeing unused kernel image memory: 1580K |
| [ 1.329562] Write protecting the kernel read-only data: 16384k |
| [ 1.330577] Freeing unused kernel image memory: 2036K |
| [ 1.331067] Freeing unused kernel image memory: 852K |
| [ 1.343394] x86/mm: Checked W+X mappings: passed, no W+X pages found. |
| [ 1.343455] x86/mm: Checking user space page tables |
| [ 1.348650] x86/mm: Checked W+X mappings: passed, no W+X pages found. |
| [ 1.348709] Run /init as init process |
| [ 1.457586] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:29/PNP0C09:00/PNP0C0E:00/input/input3 |
| [ 1.457675] ACPI: Sleep Button [SLPB] |
| [ 1.457764] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:29/PNP0C09:00/PNP0C0D:00/input/input4 |
| [ 1.457842] ACPI: Lid Switch [LID] |
| [ 1.457928] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5 |
| [ 1.458000] ACPI: Power Button [PWRF] |
| [ 1.480616] thermal LNXTHERM:00: registered as thermal_zone0 |
| [ 1.480678] ACPI: Thermal Zone [THM0] (50 C) |
| [ 1.480728] ACPI: bus type USB registered |
| [ 1.480814] usbcore: registered new interface driver usbfs |
| [ 1.480913] usbcore: registered new interface driver hub |
| [ 1.481016] usbcore: registered new device driver usb |
| [ 1.481514] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20181213/utaddress-213) |
| [ 1.481608] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 1.481682] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20181213/utaddress-213) |
| [ 1.481771] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 1.481844] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20181213/utaddress-213) |
| [ 1.481934] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 1.482007] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20181213/utaddress-213) |
| [ 1.482095] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 1.482168] lpc_ich: Resource conflict(s) found affecting gpio_ich |
| [ 1.483822] thermal LNXTHERM:01: registered as thermal_zone1 |
| [ 1.483882] ACPI: Thermal Zone [THM1] (27 C) |
| [ 1.484119] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| [ 1.490577] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt |
| [ 1.493843] ehci-pci: EHCI PCI platform driver |
| [ 1.494022] ehci-pci 0000:00:1a.0: EHCI Host Controller |
| [ 1.494085] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 |
| [ 1.494169] ehci-pci 0000:00:1a.0: debug port 2 |
| [ 1.494447] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k |
| [ 1.494450] SCSI subsystem initialized |
| [ 1.494526] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. |
| [ 1.494669] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode |
| [ 1.498137] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported |
| [ 1.499158] cryptd: max_cpu_qlen set to 1000 |
| [ 1.499814] ehci-pci 0000:00:1a.0: irq 19, io mem 0xe1b3f000 |
| [ 1.508057] libata version 3.00 loaded. |
| [ 1.511592] ahci 0000:00:1f.2: version 3.0 |
| [ 1.511758] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled |
| [ 1.512949] sdhci: Secure Digital Host Controller Interface driver |
| [ 1.513009] sdhci: Copyright(c) Pierre Ossman |
| [ 1.513556] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 |
| [ 1.513661] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00 |
| [ 1.513734] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.513802] usb usb1: Product: EHCI Host Controller |
| [ 1.513861] usb usb1: Manufacturer: Linux 5.0.0-trunk-amd64 ehci_hcd |
| [ 1.513920] usb usb1: SerialNumber: 0000:00:1a.0 |
| [ 1.514102] hub 1-0:1.0: USB hub found |
| [ 1.514165] hub 1-0:1.0: 3 ports detected |
| [ 1.514423] xhci_hcd 0000:00:14.0: xHCI Host Controller |
| [ 1.514495] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 |
| [ 1.515618] xhci_hcd 0000:00:14.0: hcc params 0x200071a1 hci version 0x100 quirks 0x000000000000b930 |
| [ 1.515694] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported |
| [ 1.516651] sdhci-pci 0000:02:00.0: SDHCI controller found [1180:e822] (rev 7) |
| [ 1.517241] sdhci-pci 0000:02:00.0: Will use DMA mode even though HW doesn't fully claim to support it. |
| [ 1.517522] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes |
| [ 1.518060] mmc0: SDHCI controller on PCI [0000:02:00.0] using DMA |
| [ 1.518519] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00 |
| [ 1.518591] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.518660] usb usb2: Product: xHCI Host Controller |
| [ 1.518717] usb usb2: Manufacturer: Linux 5.0.0-trunk-amd64 xhci-hcd |
| [ 1.518777] usb usb2: SerialNumber: 0000:00:14.0 |
| [ 1.526754] AVX version of gcm_enc/dec engaged. |
| [ 1.526815] AES CTR mode by8 optimization enabled |
| [ 1.526914] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x17 impl SATA mode |
| [ 1.526987] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst |
| [ 1.527878] scsi host0: ahci |
| [ 1.528106] hub 2-0:1.0: USB hub found |
| [ 1.528180] scsi host1: ahci |
| [ 1.528310] hub 2-0:1.0: 4 ports detected |
| [ 1.528529] ehci-pci 0000:00:1d.0: EHCI Host Controller |
| [ 1.528541] xhci_hcd 0000:00:14.0: xHCI Host Controller |
| [ 1.528608] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3 |
| [ 1.528656] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 |
| [ 1.528742] ehci-pci 0000:00:1d.0: debug port 2 |
| [ 1.528795] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed |
| [ 1.528987] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.00 |
| [ 1.529104] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.529220] usb usb4: Product: xHCI Host Controller |
| [ 1.529309] usb usb4: Manufacturer: Linux 5.0.0-trunk-amd64 xhci-hcd |
| [ 1.529399] usb usb4: SerialNumber: 0000:00:14.0 |
| [ 1.529590] hub 4-0:1.0: USB hub found |
| [ 1.529689] hub 4-0:1.0: 4 ports detected |
| [ 1.530054] scsi host2: ahci |
| [ 1.530233] scsi host3: ahci |
| [ 1.530403] scsi host4: ahci |
| [ 1.530576] scsi host5: ahci |
| [ 1.530718] ata1: SATA max UDMA/133 abar m2048@0xe1b3e000 port 0xe1b3e100 irq 29 |
| [ 1.530832] ata2: SATA max UDMA/133 abar m2048@0xe1b3e000 port 0xe1b3e180 irq 29 |
| [ 1.530947] ata3: SATA max UDMA/133 abar m2048@0xe1b3e000 port 0xe1b3e200 irq 29 |
| [ 1.531062] ata4: DUMMY |
| [ 1.531144] ata5: SATA max UDMA/133 abar m2048@0xe1b3e000 port 0xe1b3e300 irq 29 |
| [ 1.531260] ata6: DUMMY |
| [ 1.532743] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported |
| [ 1.532751] ehci-pci 0000:00:1d.0: irq 18, io mem 0xe1b40000 |
| [ 1.545474] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 |
| [ 1.545742] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00 |
| [ 1.545820] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.545892] usb usb3: Product: EHCI Host Controller |
| [ 1.545951] usb usb3: Manufacturer: Linux 5.0.0-trunk-amd64 ehci_hcd |
| [ 1.546012] usb usb3: SerialNumber: 0000:00:1d.0 |
| [ 1.546375] hub 3-0:1.0: USB hub found |
| [ 1.546451] hub 3-0:1.0: 3 ports detected |
| [ 1.571790] [drm] Replacing VGA console driver |
| [ 1.572702] Console: switching to colour dummy device 80x25 |
| [ 1.622867] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). |
| [ 1.622883] [drm] Driver supports precise vblank timestamp query. |
| [ 1.623166] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem |
| [ 1.639459] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock |
| [ 1.673213] [drm] Initialized i915 1.6.0 20181204 for 0000:00:02.0 on minor 0 |
| [ 1.673379] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) |
| [ 1.706492] acpi device:0d: registered as cooling_device5 |
| [ 1.706613] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7 |
| [ 1.753147] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 3c:97:0e:46:56:66 |
| [ 1.753150] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection |
| [ 1.753188] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF |
| [ 1.754410] e1000e 0000:00:19.0 enp0s25: renamed from eth0 |
| [ 1.843816] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [ 1.844713] ata1.00: ATA-9: KINGSTON SKC400S37512G, SAFM001B, max UDMA/133 |
| [ 1.844723] ata1.00: 1000215216 sectors, multi 0: LBA48 NCQ (depth 32), AA |
| [ 1.844959] ata1.00: configured for UDMA/133 |
| [ 1.845246] scsi 0:0:0:0: Direct-Access ATA KINGSTON SKC400S 001B PQ: 0 ANSI: 5 |
| [ 1.849503] usb 1-1: new high-speed USB device number 2 using ehci-pci |
| [ 1.865525] usb 2-3: new high-speed USB device number 2 using xhci_hcd |
| [ 1.893491] usb 3-1: new high-speed USB device number 2 using ehci-pci |
| [ 2.004484] fbcon: inteldrmfb (fb0) is primary device |
| [ 2.010302] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 |
| [ 2.010303] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 2.010628] hub 1-1:1.0: USB hub found |
| [ 2.010681] hub 1-1:1.0: 6 ports detected |
| [ 2.018216] usb 2-3: New USB device found, idVendor=2109, idProduct=2813, bcdDevice= 2.21 |
| [ 2.018220] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 2.018222] usb 2-3: Product: USB2.0 Hub |
| [ 2.018223] usb 2-3: Manufacturer: VIA Labs, Inc. |
| [ 2.019175] hub 2-3:1.0: USB hub found |
| [ 2.020042] hub 2-3:1.0: 4 ports detected |
| [ 2.070315] usb 3-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 |
| [ 2.070319] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 2.070882] hub 3-1:1.0: USB hub found |
| [ 2.071236] hub 3-1:1.0: 8 ports detected |
| [ 2.093549] tsc: Refined TSC clocksource calibration: 2893.425 MHz |
| [ 2.093569] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29b4fff0c46, max_idle_ns: 440795237523 ns |
| [ 2.093636] clocksource: Switched to clocksource tsc |
| [ 2.160699] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [ 2.198051] ata2.00: ATA-10: ST2000LM015-2E8174, SDM1, max UDMA/133 |
| [ 2.198056] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA |
| [ 2.202732] usb 4-3: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd |
| [ 2.229963] psmouse serio1: synaptics: queried max coordinates: x [..5470], y [..4498] |
| [ 2.247781] ata2.00: configured for UDMA/133 |
| [ 2.257378] scsi 1:0:0:0: Direct-Access ATA ST2000LM015-2E81 SDM1 PQ: 0 ANSI: 5 |
| [ 2.292391] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b1/0xb40000/0xa0000/0x0, board id: 0, fw id: 920262 |
| [ 2.292400] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0 |
| [ 2.297547] usb 1-1.3: new full-speed USB device number 3 using ehci-pci |
| [ 2.331812] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6 |
| [ 2.346913] usb 4-3: New USB device found, idVendor=2109, idProduct=0813, bcdDevice= 2.21 |
| [ 2.346917] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 2.346919] usb 4-3: Product: USB3.0 Hub |
| [ 2.346921] usb 4-3: Manufacturer: VIA Labs, Inc. |
| [ 2.349924] hub 4-3:1.0: USB hub found |
| [ 2.350151] hub 4-3:1.0: 4 ports detected |
| [ 2.361494] usb 3-1.5: new high-speed USB device number 3 using ehci-pci |
| [ 2.411537] usb 1-1.3: New USB device found, idVendor=147e, idProduct=2020, bcdDevice= 0.01 |
| [ 2.411541] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 2.411543] usb 1-1.3: Product: Biometric Coprocessor |
| [ 2.411545] usb 1-1.3: Manufacturer: Auth |
| [ 2.470308] usb 3-1.5: New USB device found, idVendor=17ef, idProduct=100a, bcdDevice= 0.00 |
| [ 2.470312] usb 3-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 2.470861] hub 3-1.5:1.0: USB hub found |
| [ 2.471015] hub 3-1.5:1.0: 6 ports detected |
| [ 2.489575] usb 1-1.4: new full-speed USB device number 4 using ehci-pci |
| [ 2.572671] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) |
| [ 2.573087] ata3.00: supports DRM functions and may not be fully accessible |
| [ 2.573208] ata3.00: ATA-11: KINGSTON SUV500MS240G, 003056RI, max UDMA/133 |
| [ 2.573212] ata3.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 32), AA |
| [ 2.574085] ata3.00: Trusted Computing capability qword not valid! |
| [ 2.574864] ata3.00: supports DRM functions and may not be fully accessible |
| [ 2.576015] ata3.00: Trusted Computing capability qword not valid! |
| [ 2.576022] ata3.00: configured for UDMA/133 |
| [ 2.576392] scsi 2:0:0:0: Direct-Access ATA KINGSTON SUV500M 56RI PQ: 0 ANSI: 5 |
| [ 2.602156] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=21e6, bcdDevice= 1.12 |
| [ 2.602160] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [ 2.602162] usb 1-1.4: Product: BCM20702A0 |
| [ 2.602164] usb 1-1.4: Manufacturer: Broadcom Corp |
| [ 2.602165] usb 1-1.4: SerialNumber: B8763FA9D32E |
| [ 2.681538] usb 1-1.6: new high-speed USB device number 5 using ehci-pci |
| [ 2.757550] usb 3-1.5.1: new full-speed USB device number 4 using ehci-pci |
| [ 2.793561] Console: switching to colour frame buffer device 200x67 |
| [ 2.801760] usb 1-1.6: New USB device found, idVendor=5986, idProduct=02d5, bcdDevice=10.11 |
| [ 2.801763] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 2.801765] usb 1-1.6: Product: Integrated Camera |
| [ 2.801767] usb 1-1.6: Manufacturer: Ricoh Company Ltd. |
| [ 2.842485] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device |
| [ 2.871920] usb 3-1.5.1: New USB device found, idVendor=17ef, idProduct=604d, bcdDevice= 1.22 |
| [ 2.874742] usb 3-1.5.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0 |
| [ 2.877483] usb 3-1.5.1: Product: Lenovo USB Receiver |
| [ 2.884300] hidraw: raw HID events driver (C) Jiri Kosina |
| [ 2.892312] ata5: SATA link down (SStatus 0 SControl 300) |
| [ 2.893719] usbcore: registered new interface driver usbhid |
| [ 2.895581] usbhid: USB HID core driver |
| [ 2.902958] input: Lenovo USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.5/3-1.5.1/3-1.5.1:1.0/0003:17EF:604D.0001/input/input9 |
| [ 2.906120] sd 0:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/477 GiB) |
| [ 2.906785] sd 2:0:0:0: [sdc] 468862128 512-byte logical blocks: (240 GB/224 GiB) |
| [ 2.907639] sd 0:0:0:0: [sda] Write Protect is off |
| [ 2.909156] sd 2:0:0:0: [sdc] 4096-byte physical blocks |
| [ 2.910478] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 |
| [ 2.911691] sd 2:0:0:0: [sdc] Write Protect is off |
| [ 2.911761] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 2.911781] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) |
| [ 2.911782] sd 1:0:0:0: [sdb] 4096-byte physical blocks |
| [ 2.911792] sd 1:0:0:0: [sdb] Write Protect is off |
| [ 2.911794] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 |
| [ 2.911810] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 2.912798] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 |
| [ 2.912968] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 2.913341] sdc: sdc1 sdc2 sdc3 |
| [ 2.917012] sda: sda1 sda2 < sda5 > |
| [ 2.918469] sdb: sdb1 |
| [ 2.918572] sd 2:0:0:0: [sdc] Attached SCSI disk |
| [ 2.919818] sd 0:0:0:0: [sda] Attached SCSI disk |
| [ 2.920756] sd 1:0:0:0: [sdb] Attached SCSI disk |
| [ 2.957471] usb 3-1.5.6: new high-speed USB device number 5 using ehci-pci |
| [ 2.961730] hid-generic 0003:17EF:604D.0001: input,hidraw0: USB HID v1.11 Keyboard [Lenovo USB Receiver] on usb-0000:00:1d.0-1.5.1/input0 |
| [ 2.963247] input: Lenovo USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.5/3-1.5.1/3-1.5.1:1.1/0003:17EF:604D.0002/input/input10 |
| [ 2.964405] hid-generic 0003:17EF:604D.0002: input,hidraw1: USB HID v1.11 Mouse [Lenovo USB Receiver] on usb-0000:00:1d.0-1.5.1/input1 |
| [ 2.966000] input: Lenovo USB Receiver Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.5/3-1.5.1/3-1.5.1:1.2/0003:17EF:604D.0003/input/input11 |
| [ 2.977493] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 |
| [ 3.029663] input: Lenovo USB Receiver System Control as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.5/3-1.5.1/3-1.5.1:1.2/0003:17EF:604D.0003/input/input12 |
| [ 3.032082] input: Lenovo USB Receiver Keypad as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.5/3-1.5.1/3-1.5.1:1.2/0003:17EF:604D.0003/input/input13 |
| [ 3.034580] hid-generic 0003:17EF:604D.0003: input,hiddev0,hidraw2: USB HID v1.11 Keypad [Lenovo USB Receiver] on usb-0000:00:1d.0-1.5.1/input2 |
| [ 3.070243] usb 3-1.5.6: New USB device found, idVendor=0409, idProduct=005a, bcdDevice= 1.00 |
| [ 3.071497] usb 3-1.5.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 3.072993] hub 3-1.5.6:1.0: USB hub found |
| [ 3.074833] hub 3-1.5.6:1.0: 4 ports detected |
| [ 3.220889] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input8 |
| [ 3.257462] raid6: sse2x4 gen() 14115 MB/s |
| [ 3.305474] usb 3-1.5.2: new full-speed USB device number 6 using ehci-pci |
| [ 3.325460] raid6: sse2x4 xor() 8359 MB/s |
| [ 3.393465] raid6: sse2x2 gen() 11261 MB/s |
| [ 3.421159] usb 3-1.5.2: New USB device found, idVendor=04b4, idProduct=4042, bcdDevice= 1.03 |
| [ 3.422743] usb 3-1.5.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 3.428349] input: HID 04b4:4042 as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.5/3-1.5.2/3-1.5.2:1.0/0003:04B4:4042.0004/input/input14 |
| [ 3.461462] raid6: sse2x2 xor() 5771 MB/s |
| [ 3.489616] hid-generic 0003:04B4:4042.0004: input,hidraw3: USB HID v1.11 Keyboard [HID 04b4:4042] on usb-0000:00:1d.0-1.5.2/input0 |
| [ 3.496095] input: HID 04b4:4042 Mouse as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.5/3-1.5.2/3-1.5.2:1.1/0003:04B4:4042.0005/input/input15 |
| [ 3.497385] input: HID 04b4:4042 System Control as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.5/3-1.5.2/3-1.5.2:1.1/0003:04B4:4042.0005/input/input16 |
| [ 3.498899] usb 3-1.5.6.1: new high-speed USB device number 7 using ehci-pci |
| [ 3.529465] raid6: sse2x1 gen() 9185 MB/s |
| [ 3.557508] input: HID 04b4:4042 Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.5/3-1.5.2/3-1.5.2:1.1/0003:04B4:4042.0005/input/input17 |
| [ 3.558832] input: HID 04b4:4042 as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.5/3-1.5.2/3-1.5.2:1.1/0003:04B4:4042.0005/input/input18 |
| [ 3.560129] input: HID 04b4:4042 Keyboard as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.5/3-1.5.2/3-1.5.2:1.1/0003:04B4:4042.0005/input/input19 |
| [ 3.561479] hid-generic 0003:04B4:4042.0005: input,hiddev1,hidraw4: USB HID v1.11 Mouse [HID 04b4:4042] on usb-0000:00:1d.0-1.5.2/input1 |
| [ 3.597463] raid6: sse2x1 xor() 7559 MB/s |
| [ 3.598671] raid6: using algorithm sse2x4 gen() 14115 MB/s |
| [ 3.599872] raid6: .... xor() 8359 MB/s, rmw enabled |
| [ 3.601074] raid6: using ssse3x2 recovery algorithm |
| [ 3.602886] xor: automatically using best checksumming function avx |
| [ 3.604590] async_tx: api initialized (async) |
| [ 3.610100] usb 3-1.5.6.1: New USB device found, idVendor=0409, idProduct=005a, bcdDevice= 1.00 |
| [ 3.611952] usb 3-1.5.6.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 3.615258] hub 3-1.5.6.1:1.0: USB hub found |
| [ 3.618084] hub 3-1.5.6.1:1.0: 4 ports detected |
| [ 3.701541] usb 3-1.5.6.2: new high-speed USB device number 8 using ehci-pci |
| [ 3.791806] device-mapper: uevent: version 1.0.3 |
| [ 3.793230] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com |
| [ 3.819146] usb 3-1.5.6.2: New USB device found, idVendor=0409, idProduct=0058, bcdDevice= 1.00 |
| [ 3.822322] usb 3-1.5.6.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 3.826562] usb 3-1.5.6.2: Product: USB2.0 Hub Controller |
| [ 3.828759] usb 3-1.5.6.2: Manufacturer: NEC Corporation |
| [ 3.831009] hub 3-1.5.6.2:1.0: USB hub found |
| [ 3.832759] hub 3-1.5.6.2:1.0: 4 ports detected |
| [ 3.929554] usb 3-1.5.6.1.2: new full-speed USB device number 9 using ehci-pci |
| [ 4.048351] usb 3-1.5.6.1.2: New USB device found, idVendor=067b, idProduct=2305, bcdDevice= 2.02 |
| [ 4.051887] usb 3-1.5.6.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 4.054034] usb 3-1.5.6.1.2: Product: IEEE-1284 Controller |
| [ 4.056130] usb 3-1.5.6.1.2: Manufacturer: Prolific Technology Inc. |
| [ 4.137558] usb 3-1.5.6.1.3: new full-speed USB device number 10 using ehci-pci |
| [ 4.251692] usb 3-1.5.6.1.3: New USB device found, idVendor=067b, idProduct=2303, bcdDevice= 4.00 |
| [ 4.255273] usb 3-1.5.6.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 4.258851] usb 3-1.5.6.1.3: Product: USB-Serial Controller D |
| [ 4.262433] usb 3-1.5.6.1.3: Manufacturer: Prolific Technology Inc. |
| [ 18.722696] NET: Registered protocol family 38 |
| [ 18.853376] device-mapper: crypt: xts(aes) using implementation "xts-aes-aesni" |
| [ 19.214711] PM: Image not found (code -22) |
| [ 19.237562] PM: Marking nosave pages: [mem 0x00000000-0x00000fff] |
| [ 19.237566] PM: Marking nosave pages: [mem 0x0009f000-0x000fffff] |
| [ 19.237571] PM: Marking nosave pages: [mem 0x7ff22000-0xffffffff] |
| [ 19.240206] PM: Basic memory bitmaps created |
| [ 19.240975] PM: Basic memory bitmaps freed |
| [ 19.241815] video LNXVIDEO:00: Restoring backlight state |
| [ 19.394418] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) |
| [ 19.602564] systemd[1]: Inserted module 'autofs4' |
| [ 19.622536] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) |
| [ 19.641647] systemd[1]: Detected architecture x86-64. |
| [ 19.650286] systemd[1]: Set hostname to <TP-T430s>. |
| [ 19.765397] systemd[1]: /lib/systemd/system/thinkfan.service:8: PIDFile= references path below legacy directory /var/run/, updating /var/run/thinkfan.pid → /run/thinkfan.pid; please update the unit file accordingly. |
| [ 19.769004] systemd[1]: /etc/systemd/system/teamviewerd.service:8: PIDFile= references path below legacy directory /var/run/, updating /var/run/teamviewerd.pid → /run/teamviewerd.pid; please update the unit file accordingly. |
| [ 19.787389] systemd[1]: /lib/systemd/system/fancontrol.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/fancontrol.pid → /run/fancontrol.pid; please update the unit file accordingly. |
| [ 19.818406] systemd[1]: Listening on Journal Socket (/dev/log). |
| [ 19.820114] systemd[1]: Listening on Device-mapper event daemon FIFOs. |
| [ 19.822604] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. |
| [ 19.829158] systemd[1]: Started Forward Password Requests to Wall Directory Watch. |
| [ 19.854806] loop: module loaded |
| [ 19.867655] lp: driver loaded but no devices found |
| [ 19.872398] ppdev: user-space parallel port driver |
| [ 19.888127] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro |
| [ 20.034111] systemd-journald[462]: Received request to flush runtime journal from PID 1 |
| [ 20.178237] ACPI: AC Adapter [AC] (on-line) |
| [ 20.190236] battery: ACPI: Battery Slot [BAT0] (battery present) |
| [ 20.191653] battery: ACPI: Battery Slot [BAT1] (battery absent) |
| [ 20.209515] tpm_tis 00:06: 1.2 TPM (device-id 0x0, rev-id 78) |
| [ 20.214559] Non-volatile memory driver v1.3 |
| [ 20.234610] thinkpad_acpi: ThinkPad ACPI Extras v0.26 |
| [ 20.235902] thinkpad_acpi: http://ibm-acpi.sf.net/ |
| [ 20.237183] thinkpad_acpi: ThinkPad BIOS CBET4000 4.9-1475-g2b8789bb3b, EC G7HT39WW-3.22 |
| [ 20.238489] thinkpad_acpi: Lenovo ThinkPad T430s, model 23532NU |
| [ 20.240323] thinkpad_acpi: radio switch found; radios are enabled |
| [ 20.241790] thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode |
| [ 20.243127] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver |
| [ 20.244478] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... |
| [ 20.246186] iTCO_vendor_support: vendor-support=0 |
| [ 20.247426] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked |
| [ 20.250565] thinkpad_acpi: rfkill switch tpacpi_wwan_sw: radio is unblocked |
| [ 20.253199] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 |
| [ 20.254847] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560) |
| [ 20.256382] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) |
| [ 20.267108] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one |
| [ 20.268624] thinkpad_acpi: Console audio control enabled, mode: monitor (read only) |
| [ 20.282210] thinkpad_acpi: battery 1 registered (start 0, stop 100) |
| [ 20.282217] battery: new extension: ThinkPad Battery Extension |
| [ 20.285117] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input20 |
| [ 20.299040] snd_hda_intel 0000:00:1b.0: Linked as a consumer to 0000:00:02.0 |
| [ 20.300468] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) |
| [ 20.300539] sd 0:0:0:0: Attached scsi generic sg0 type 0 |
| [ 20.303516] input: PC Speaker as /devices/platform/pcspkr/input/input21 |
| [ 20.305165] sd 1:0:0:0: Attached scsi generic sg1 type 0 |
| [ 20.308067] wl: loading out-of-tree module taints kernel. |
| [ 20.308450] sd 2:0:0:0: Attached scsi generic sg2 type 0 |
| [ 20.309397] wl: module license 'MIXED/Proprietary' taints kernel. |
| [ 20.312153] Disabling lock debugging due to kernel taint |
| [ 20.314792] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer |
| [ 20.316291] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules |
| [ 20.317531] wl: module verification failed: signature and/or required key missing - tainting kernel |
| [ 20.317810] RAPL PMU: hw unit of domain package 2^-16 Joules |
| [ 20.320694] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules |
| [ 20.338807] wlan0: Broadcom BCM43a0 802.11 Hybrid Wireless Controller 6.30.223.271 (r587334) |
| |
| [ 20.346484] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker |
| [ 20.348026] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) |
| [ 20.349365] snd_hda_codec_realtek hdaudioC0D0: hp_outs=2 (0x15/0x1b/0x0/0x0/0x0) |
| [ 20.350807] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 |
| [ 20.352114] snd_hda_codec_realtek hdaudioC0D0: inputs: |
| [ 20.355020] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18 |
| [ 20.356573] snd_hda_codec_realtek hdaudioC0D0: Dock Mic=0x19 |
| [ 20.358087] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12 |
| [ 20.413046] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input22 |
| [ 20.415007] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input23 |
| [ 20.416613] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input24 |
| [ 20.418238] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input25 |
| [ 20.426680] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input26 |
| [ 20.428363] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input27 |
| [ 20.429985] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input28 |
| [ 20.431585] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input29 |
| [ 20.441538] intel_rapl: Found RAPL domain package |
| [ 20.443041] intel_rapl: Found RAPL domain core |
| [ 20.444506] intel_rapl: Found RAPL domain uncore |
| [ 20.571509] wl 0000:01:00.0 wlp1s0: renamed from wlan0 |
| [ 20.683871] Adding 16699388k swap on /dev/mapper/TP--T430s--vg-swap_1. Priority:-2 extents:1 across:16699388k SSFS |
| [ 20.727439] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem |
| [ 20.734103] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null) |
| [ 20.934596] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) |
| [ 20.991483] audit: type=1400 audit(1556660721.189:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1185 comm="apparmor_parser" |
| [ 20.993029] audit: type=1400 audit(1556660721.189:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1185 comm="apparmor_parser" |
| [ 20.994561] audit: type=1400 audit(1556660721.189:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1185 comm="apparmor_parser" |
| [ 20.996075] audit: type=1400 audit(1556660721.189:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="system_tor" pid=1187 comm="apparmor_parser" |
| [ 20.997594] audit: type=1400 audit(1556660721.193:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/freshclam" pid=1189 comm="apparmor_parser" |
| [ 20.999121] audit: type=1400 audit(1556660721.193:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ioquake3" pid=1188 comm="apparmor_parser" |
| [ 21.000572] audit: type=1400 audit(1556660721.193:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ioquake3//popup" pid=1188 comm="apparmor_parser" |
| [ 21.001892] audit: type=1400 audit(1556660721.197:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/haveged" pid=1191 comm="apparmor_parser" |
| [ 21.003109] audit: type=1400 audit(1556660721.201:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=1192 comm="apparmor_parser" |
| [ 21.003111] audit: type=1400 audit(1556660721.201:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=1184 comm="apparmor_parser" |
| [ 21.225208] Process accounting resumed |
| [ 22.206353] media: Linux media interface: v0.10 |
| [ 22.223283] videodev: Linux video capture interface: v2.00 |
| [ 22.309819] alg: No test for fips(ansi_cprng) (fips_ansi_cprng) |
| [ 22.369786] Bluetooth: Core ver 2.22 |
| [ 22.369811] NET: Registered protocol family 31 |
| [ 22.369813] Bluetooth: HCI device and connection manager initialized |
| [ 22.370634] Bluetooth: HCI socket layer initialized |
| [ 22.370639] Bluetooth: L2CAP socket layer initialized |
| [ 22.370645] Bluetooth: SCO socket layer initialized |
| [ 22.373574] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:02d5) |
| [ 22.399224] usbcore: registered new interface driver btusb |
| [ 22.440038] uvcvideo 1-1.6:1.0: Entity type for entity Extension 4 was not initialized! |
| [ 22.440043] uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized! |
| [ 22.440045] uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized! |
| [ 22.440047] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized! |
| [ 22.440123] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input30 |
| [ 22.440425] usbcore: registered new interface driver uvcvideo |
| [ 22.440427] USB Video Class driver (1.1.1) |
| [ 22.466554] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 |
| [ 22.466557] Bluetooth: BNEP filters: protocol multicast |
| [ 22.466562] Bluetooth: BNEP socket layer initialized |
| [ 22.508049] Bluetooth: hci0: BCM: chip id 63 |
| [ 22.509051] Bluetooth: hci0: BCM: features 0x07 |
| [ 22.525183] Bluetooth: hci0: Broadcom Bluetooth Device |
| [ 22.526092] Bluetooth: hci0: BCM20702A1 (001.002.014) build 1669 |
| [ 22.528351] bluetooth hci0: firmware: direct-loading firmware brcm/BCM20702A1-0a5c-21e6.hcd |
| [ 23.392121] Bluetooth: hci0: BCM20702A1 (001.002.014) build 1669 |
| [ 23.408069] Bluetooth: hci0: Broadcom Bluetooth Device |
| [ 24.117095] usblp 3-1.5.6.1.2:1.0: usblp2: USB Bidirectional printer dev 9 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 |
| [ 24.117132] usbcore: registered new interface driver usblp |
| [ 24.129256] usbcore: registered new interface driver usbserial_generic |
| [ 24.129267] usbserial: USB Serial support registered for generic |
| [ 24.131758] usbcore: registered new interface driver pl2303 |
| [ 24.131771] usbserial: USB Serial support registered for pl2303 |
| [ 24.131804] pl2303 3-1.5.6.1.3:1.0: pl2303 converter detected |
| [ 24.135702] usb 3-1.5.6.1.3: pl2303 converter now attached to ttyUSB0 |
| [ 24.543491] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None |
| [ 24.543536] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready |
| [ 24.782226] Bluetooth: RFCOMM TTY layer initialized |
| [ 24.782235] Bluetooth: RFCOMM socket layer initialized |
| [ 24.782240] Bluetooth: RFCOMM ver 1.11 |
| [ 29.987585] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None |
| [ 30.878054] usb 1-1.3: usbfs: interface 0 claimed by usbfs while 'FingerprintDevi' sets config #1 |
| [ 31.809989] usb 1-1.3: usbfs: interface 0 claimed by usbfs while 'FingerprintDevi' sets config #1 |
| [ 32.742018] usb 1-1.3: usbfs: interface 0 claimed by usbfs while 'FingerprintDevi' sets config #1 |
| [ 39.498073] fuse init (API version 7.28) |
| [ 40.035204] kauditd_printk_skb: 25 callbacks suppressed |
| [ 40.035206] audit: type=1400 audit(1556660740.233:37): apparmor="DENIED" operation="open" profile="/usr/sbin/cups-browsed" name="/usr/share/cups/locale/" pid=1407 comm="cups-browsed" requested_mask="r" denied_mask="r" fsuid=0 ouid=0 |
| [ 40.035215] audit: type=1400 audit(1556660740.233:38): apparmor="DENIED" operation="open" profile="/usr/sbin/cups-browsed" name="/usr/share/locale/" pid=1407 comm="cups-browsed" requested_mask="r" denied_mask="r" fsuid=0 ouid=0 |
| [ 41.748070] rfkill: input handler disabled |
| [ 42.650508] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready |
| [ 42.870024] vboxdrv: Found 4 processor cores |
| [ 42.889872] vboxdrv: TSC mode is Invariant, tentative frequency 2893424525 Hz |
| [ 42.889887] vboxdrv: Successfully loaded version 6.0.6_Debian (interface 0x00290008) |
| [ 42.914664] VBoxNetFlt: Successfully started. |
| [ 42.931206] VBoxNetAdp: Successfully started. |
| [ 42.942323] VBoxPciLinuxInit |
| [ 42.950891] vboxpci: IOMMU not found (not registered) |
| [ 43.297636] audit: type=1400 audit(1556660743.497:39): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=3090 comm="apparmor_parser" |
| [ 43.429927] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. |
| [ 43.432079] Bridge firewalling registered |
| [ 43.795713] Initializing XFRM netlink socket |
| [ 404.663049] Chrome_~dThread[8935]: segfault at 0 ip 00007f8d14a86e43 sp 00007f8d12f3aad0 error 6 in libxul.so[7f8d14a73000+3a38000] |
| [ 404.663061] Code: 15 1a c6 60 04 48 89 10 c7 04 25 00 00 00 00 d4 08 00 00 e8 57 77 ff ff 90 48 8b 05 6f e8 9d 05 48 8d 0d 60 c6 60 04 48 89 08 <c7> 04 25 00 00 00 00 54 09 00 00 e8 35 77 ff ff e8 1e f3 ff ff 48 |
| [ 404.667285] Chrome_~dThread[8981]: segfault at 0 ip 00007fd5bd7c8e43 sp 00007fd5bbc77ad0 error 6 in libxul.so[7fd5bd7b5000+3a38000] |
| [ 404.667311] Code: 15 1a c6 60 04 48 89 10 c7 04 25 00 00 00 00 d4 08 00 00 e8 57 77 ff ff 90 48 8b 05 6f e8 9d 05 48 8d 0d 60 c6 60 04 48 89 08 <c7> 04 25 00 00 00 00 54 09 00 00 e8 35 77 ff ff e8 1e f3 ff ff 48 |
| [ 903.122507] audit: type=1400 audit(1556661603.321:40): apparmor="DENIED" operation="open" profile="/usr/sbin/cups-browsed" name="/usr/share/cups/locale/" pid=9917 comm="cups-browsed" requested_mask="r" denied_mask="r" fsuid=0 ouid=0 |
| [ 903.122520] audit: type=1400 audit(1556661603.321:41): apparmor="DENIED" operation="open" profile="/usr/sbin/cups-browsed" name="/usr/share/locale/" pid=9917 comm="cups-browsed" requested_mask="r" denied_mask="r" fsuid=0 ouid=0 |
| [ 4635.785334] e1000e: enp0s25 NIC Link is Down |
| [ 4635.965206] PM: suspend entry (deep) |
| [ 4635.965210] PM: Syncing filesystems ... done. |
| [ 4635.978147] (NULL device *): firmware: direct-loading firmware brcm/BCM20702A1-0a5c-21e6.hcd |
| [ 4635.978185] Freezing user space processes ... (elapsed 0.002 seconds) done. |
| [ 4635.980393] OOM killer disabled. |
| [ 4635.980394] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. |
| [ 4635.981577] printk: Suspending console(s) (use no_console_suspend to debug) |
| [ 4636.005784] sd 2:0:0:0: [sdc] Synchronizing SCSI cache |
| [ 4636.006718] sd 2:0:0:0: [sdc] Stopping disk |
| [ 4636.121760] sd 1:0:0:0: [sdb] Synchronizing SCSI cache |
| [ 4636.121844] sd 0:0:0:0: [sda] Synchronizing SCSI cache |
| [ 4636.122045] sd 1:0:0:0: [sdb] Stopping disk |
| [ 4636.124253] sd 0:0:0:0: [sda] Stopping disk |
| [ 4636.317631] e1000e: EEE TX LPI TIMER: 00000011 |
| [ 4637.078853] ACPI: EC: interrupt blocked |
| [ 4637.122159] ACPI: Preparing to enter system sleep state S3 |
| [ 4637.125257] ACPI: EC: event blocked |
| [ 4637.125257] ACPI: EC: EC stopped |
| [ 4637.125258] PM: Saving platform NVS memory |
| [ 4637.125259] Disabling non-boot CPUs ... |
| [ 4637.127567] smpboot: CPU 1 is now offline |
| [ 4637.132315] IRQ 31: no longer affine to CPU2 |
| [ 4637.133939] smpboot: CPU 2 is now offline |
| [ 4637.138234] IRQ 17: no longer affine to CPU3 |
| [ 4637.138242] IRQ 26: no longer affine to CPU3 |
| [ 4637.138245] IRQ 27: no longer affine to CPU3 |
| [ 4637.138249] IRQ 30: no longer affine to CPU3 |
| [ 4637.139259] smpboot: CPU 3 is now offline |
| [ 4637.144851] ACPI: Low-level resume complete |
| [ 4637.144888] ACPI: EC: EC started |
| [ 4637.144888] PM: Restoring platform NVS memory |
| [ 4637.145213] Enabling non-boot CPUs ... |
| [ 4637.145249] x86: Booting SMP configuration: |
| [ 4637.145250] smpboot: Booting Node 0 Processor 1 APIC 0x1 |
| [ 4637.147870] cache: parent cpu1 should not be sleeping |
| [ 4637.148385] CPU1 is up |
| [ 4637.148408] smpboot: Booting Node 0 Processor 2 APIC 0x2 |
| [ 4637.150849] cache: parent cpu2 should not be sleeping |
| [ 4637.151317] CPU2 is up |
| [ 4637.151360] smpboot: Booting Node 0 Processor 3 APIC 0x3 |
| [ 4637.154180] cache: parent cpu3 should not be sleeping |
| [ 4637.154617] CPU3 is up |
| [ 4637.161435] ACPI: Waking up from system sleep state S3 |
| [ 4637.163856] ACPI: EC: interrupt unblocked |
| [ 4637.187615] sdhci-pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz. |
| [ 4637.205112] ACPI: EC: event unblocked |
| [ 4637.205865] ACPI: button: The lid device is not compliant to SW_LID. |
| [ 4637.216748] sd 1:0:0:0: [sdb] Starting disk |
| [ 4637.216748] sd 0:0:0:0: [sda] Starting disk |
| [ 4637.216749] sd 2:0:0:0: [sdc] Starting disk |
| [ 4637.325991] usb 4-3: Disable of device-initiated U1 failed. |
| [ 4637.329485] usb 4-3: Disable of device-initiated U2 failed. |
| [ 4637.467016] usb 1-1.6: reset high-speed USB device number 5 using ehci-pci |
| [ 4637.471020] usb 3-1.5: reset high-speed USB device number 3 using ehci-pci |
| [ 4637.516091] usb 4-3: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd |
| [ 4637.517267] ata5: SATA link down (SStatus 0 SControl 300) |
| [ 4637.521326] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) |
| [ 4637.521647] ata3.00: supports DRM functions and may not be fully accessible |
| [ 4637.522522] ata3.00: Trusted Computing capability qword not valid! |
| [ 4637.523079] ata3.00: supports DRM functions and may not be fully accessible |
| [ 4637.524151] ata3.00: Trusted Computing capability qword not valid! |
| [ 4637.524156] ata3.00: configured for UDMA/133 |
| [ 4637.525345] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [ 4637.525682] ata1.00: configured for UDMA/133 |
| [ 4637.539130] psmouse serio1: synaptics: queried max coordinates: x [..5470], y [..4498] |
| [ 4637.663084] usb 1-1.4: reset full-speed USB device number 4 using ehci-pci |
| [ 4637.711137] sdhci-pci 0000:02:00.0: Will use DMA mode even though HW doesn't fully claim to support it. |
| [ 4637.783383] usb 2-3: reset high-speed USB device number 2 using xhci_hcd |
| [ 4637.875131] usb 3-1.5.1: reset full-speed USB device number 4 using ehci-pci |
| [ 4637.991788] input input9: event field not found |
| [ 4637.991791] input input9: event field not found |
| [ 4637.991792] input input9: event field not found |
| [ 4637.991794] input input9: event field not found |
| [ 4637.991795] input input9: event field not found |
| [ 4637.991797] input input9: event field not found |
| [ 4637.991798] input input9: event field not found |
| [ 4637.991800] input input9: event field not found |
| [ 4638.063162] usb 3-1.5.6: reset high-speed USB device number 5 using ehci-pci |
| [ 4638.251136] usb 3-1.5.2: reset full-speed USB device number 6 using ehci-pci |
| [ 4638.467120] usb 3-1.5.6.1: reset high-speed USB device number 7 using ehci-pci |
| [ 4638.871125] usb 3-1.5.6.1.3: reset full-speed USB device number 10 using ehci-pci |
| [ 4638.980730] pl2303 ttyUSB0: pl2303 converter now disconnected from ttyUSB0 |
| [ 4638.980773] pl2303 3-1.5.6.1.3:1.0: device disconnected |
| [ 4639.059134] usb 3-1.5.6.1.2: reset full-speed USB device number 9 using ehci-pci |
| [ 4639.169470] usblp2: removed |
| [ 4640.215153] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [ 4640.302352] ata2.00: configured for UDMA/133 |
| [ 4641.190444] OOM killer enabled. |
| [ 4641.190448] Restarting tasks ... |
| [ 4641.197071] pl2303 3-1.5.6.1.3:1.0: pl2303 converter detected |
| [ 4641.199679] done. |
| [ 4641.200979] usb 3-1.5.6.1.3: pl2303 converter now attached to ttyUSB0 |
| [ 4641.202104] usblp 3-1.5.6.1.2:1.0: usblp2: USB Bidirectional printer dev 9 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 |
| [ 4641.206585] video LNXVIDEO:00: Restoring backlight state |
| [ 4641.212537] usb 3-1.5.6.2: USB disconnect, device number 8 |
| [ 4641.292726] PM: suspend exit |
| [ 4641.404722] Bluetooth: hci0: BCM: chip id 63 |
| [ 4641.405710] Bluetooth: hci0: BCM: features 0x07 |
| [ 4641.421728] Bluetooth: hci0: BCM20702A |
| [ 4641.422723] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000 |
| [ 4642.159354] ERROR @wl_cfg80211_scan : |
| [ 4642.159356] WLC_SCAN error (-22) |
| [ 4642.300707] Bluetooth: hci0: BCM20702A1 (001.002.014) build 1669 |
| [ 4642.316719] Bluetooth: hci0: Broadcom Bluetooth Device |
| [ 4644.580962] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None |
| [ 4644.581001] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready |
| [ 4645.010422] ERROR @wl_cfg80211_scan : |
| [ 4645.010425] WLC_SCAN error (-22) |
| [ 4650.021057] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None |
| [ 4672.416726] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready |
| [ 4941.531572] Process accounting resumed |
| [ 5427.975090] usb 3-1.5.6.2: new high-speed USB device number 11 using ehci-pci |
| [ 5428.088641] usb 3-1.5.6.2: New USB device found, idVendor=0409, idProduct=0058, bcdDevice= 1.00 |
| [ 5428.088648] usb 3-1.5.6.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 5428.088651] usb 3-1.5.6.2: Product: USB2.0 Hub Controller |
| [ 5428.088654] usb 3-1.5.6.2: Manufacturer: NEC Corporation |
| [ 5428.089159] hub 3-1.5.6.2:1.0: USB hub found |
| [ 5428.089352] hub 3-1.5.6.2:1.0: 4 ports detected |
| [ 5561.195266] usb 1-1.6: USB disconnect, device number 5 |
| [ 5578.907111] usb 1-1.6: new high-speed USB device number 6 using ehci-pci |
| [ 5579.026898] usb 1-1.6: New USB device found, idVendor=5986, idProduct=02d5, bcdDevice=10.11 |
| [ 5579.026905] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 5579.026908] usb 1-1.6: Product: Integrated Camera |
| [ 5579.026911] usb 1-1.6: Manufacturer: Ricoh Company Ltd. |
| [ 5579.028028] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:02d5) |
| [ 5579.034038] uvcvideo 1-1.6:1.0: Entity type for entity Extension 4 was not initialized! |
| [ 5579.034048] uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized! |
| [ 5579.034053] uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized! |
| [ 5579.034059] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized! |
| [ 5579.034275] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input31 |
| [ 5582.335254] usb 1-1.6: USB disconnect, device number 6 |
| [ 5663.627095] usb 1-1.6: new high-speed USB device number 9 using ehci-pci |
| [ 5663.742877] usb 1-1.6: New USB device found, idVendor=5986, idProduct=02d5, bcdDevice=10.11 |
| [ 5663.742884] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 5663.742887] usb 1-1.6: Product: Integrated Camera |
| [ 5663.742890] usb 1-1.6: Manufacturer: Ricoh Company Ltd. |
| [ 5663.744251] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:02d5) |
| [ 5663.750005] uvcvideo 1-1.6:1.0: Entity type for entity Extension 4 was not initialized! |
| [ 5663.750012] uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized! |
| [ 5663.750015] uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized! |
| [ 5663.750018] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized! |
| [ 5663.750148] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input32 |
| [ 5667.155475] usb 1-1.6: USB disconnect, device number 9 |
| [ 5667.295117] usb 1-1.6: new high-speed USB device number 10 using ehci-pci |
| [ 5667.412221] usb 1-1.6: New USB device found, idVendor=5986, idProduct=02d5, bcdDevice=10.11 |
| [ 5667.412229] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 5667.412232] usb 1-1.6: Product: Integrated Camera |
| [ 5667.412234] usb 1-1.6: Manufacturer: Ricoh Company Ltd. |
| [ 5667.413342] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:02d5) |
| [ 5667.419193] uvcvideo 1-1.6:1.0: Entity type for entity Extension 4 was not initialized! |
| [ 5667.419200] uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized! |
| [ 5667.419204] uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized! |
| [ 5667.419207] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized! |
| [ 5667.419346] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input33 |
| [ 5670.687193] usb 1-1.6: USB disconnect, device number 10 |
| [ 5742.223102] usb 1-1.6: new full-speed USB device number 11 using ehci-pci |
| [ 5742.387097] usb 1-1.6: new high-speed USB device number 12 using ehci-pci |
| [ 5742.506881] usb 1-1.6: New USB device found, idVendor=5986, idProduct=02d5, bcdDevice=10.11 |
| [ 5742.506888] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 5742.506891] usb 1-1.6: Product: Integrated Camera |
| [ 5742.506894] usb 1-1.6: Manufacturer: Ricoh Company Ltd. |
| [ 5742.508006] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:02d5) |
| [ 5742.513853] uvcvideo 1-1.6:1.0: Entity type for entity Extension 4 was not initialized! |
| [ 5742.513870] uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized! |
| [ 5742.513876] uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized! |
| [ 5742.513881] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized! |
| [ 5742.514056] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input34 |
| [ 5745.803233] usb 1-1.6: USB disconnect, device number 12 |
| [ 5748.591103] usb 1-1.6: new full-speed USB device number 13 using ehci-pci |
| [ 5748.755098] usb 1-1.6: new high-speed USB device number 14 using ehci-pci |
| [ 5748.874842] usb 1-1.6: New USB device found, idVendor=5986, idProduct=02d5, bcdDevice=10.11 |
| [ 5748.874849] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 5748.874852] usb 1-1.6: Product: Integrated Camera |
| [ 5748.874855] usb 1-1.6: Manufacturer: Ricoh Company Ltd. |
| [ 5748.875965] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:02d5) |
| [ 5748.881805] uvcvideo 1-1.6:1.0: Entity type for entity Extension 4 was not initialized! |
| [ 5748.881811] uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized! |
| [ 5748.881820] uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized! |
| [ 5748.881823] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized! |
| [ 5748.881957] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input35 |
| [ 5751.831326] usb 1-1.6: USB disconnect, device number 14 |
| [ 5770.467108] usb 1-1.6: new full-speed USB device number 15 using ehci-pci |
| [ 5770.631101] usb 1-1.6: new high-speed USB device number 16 using ehci-pci |
| [ 5770.750825] usb 1-1.6: New USB device found, idVendor=5986, idProduct=02d5, bcdDevice=10.11 |
| [ 5770.750832] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 5770.750835] usb 1-1.6: Product: Integrated Camera |
| [ 5770.750837] usb 1-1.6: Manufacturer: Ricoh Company Ltd. |
| [ 5770.752082] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:02d5) |
| [ 5770.757955] uvcvideo 1-1.6:1.0: Entity type for entity Extension 4 was not initialized! |
| [ 5770.757965] uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized! |
| [ 5770.757971] uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized! |
| [ 5770.757976] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized! |
| [ 5770.758199] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input36 |
| [ 5773.999310] usb 1-1.6: USB disconnect, device number 16 |
| [ 6763.531146] usb 1-1.6: new high-speed USB device number 20 using ehci-pci |
| [ 6763.646888] usb 1-1.6: New USB device found, idVendor=5986, idProduct=02d5, bcdDevice=10.11 |
| [ 6763.646896] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 6763.646899] usb 1-1.6: Product: Integrated Camera |
| [ 6763.646902] usb 1-1.6: Manufacturer: Ricoh Company Ltd. |
| [ 6763.648260] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:02d5) |
| [ 6763.654056] uvcvideo 1-1.6:1.0: Entity type for entity Extension 4 was not initialized! |
| [ 6763.654062] uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized! |
| [ 6763.654065] uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized! |
| [ 6763.654068] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized! |
| [ 6763.654202] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input37 |
| [ 6767.391222] usb 1-1.6: USB disconnect, device number 20 |
| [ 6768.259141] usb 1-1.6: new high-speed USB device number 21 using ehci-pci |
| [ 6768.374853] usb 1-1.6: New USB device found, idVendor=5986, idProduct=02d5, bcdDevice=10.11 |
| [ 6768.374860] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 6768.374863] usb 1-1.6: Product: Integrated Camera |
| [ 6768.374866] usb 1-1.6: Manufacturer: Ricoh Company Ltd. |
| [ 6768.375977] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:02d5) |
| [ 6768.382102] uvcvideo 1-1.6:1.0: Entity type for entity Extension 4 was not initialized! |
| [ 6768.382108] uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized! |
| [ 6768.382111] uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized! |
| [ 6768.382114] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized! |
| [ 6768.382247] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input38 |
| [ 6771.583138] usb 1-1.6: reset high-speed USB device number 21 using ehci-pci |
| [ 6771.698312] usb 1-1.6: USB disconnect, device number 21 |
| [ 6771.975152] usb 1-1.6: new high-speed USB device number 22 using ehci-pci |
| [ 6772.090959] usb 1-1.6: New USB device found, idVendor=5986, idProduct=02d5, bcdDevice=10.11 |
| [ 6772.090967] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 6772.090970] usb 1-1.6: Product: Integrated Camera |
| [ 6772.090973] usb 1-1.6: Manufacturer: Ricoh Company Ltd. |
| [ 6772.092084] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:02d5) |
| [ 6772.097891] uvcvideo 1-1.6:1.0: Entity type for entity Extension 4 was not initialized! |
| [ 6772.097897] uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized! |
| [ 6772.097900] uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized! |
| [ 6772.097904] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized! |
| [ 6772.098038] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input39 |
| [ 6775.287149] usb 1-1.6: reset high-speed USB device number 22 using ehci-pci |
| [ 6778.151422] usb 1-1.6: USB disconnect, device number 22 |
| [ 6809.699152] usb 1-1.6: new high-speed USB device number 23 using ehci-pci |
| [ 6809.814844] usb 1-1.6: New USB device found, idVendor=5986, idProduct=02d5, bcdDevice=10.11 |
| [ 6809.814851] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 6809.814854] usb 1-1.6: Product: Integrated Camera |
| [ 6809.814856] usb 1-1.6: Manufacturer: Ricoh Company Ltd. |
| [ 6809.816007] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:02d5) |
| [ 6809.821938] uvcvideo 1-1.6:1.0: Entity type for entity Extension 4 was not initialized! |
| [ 6809.821945] uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized! |
| [ 6809.821948] uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized! |
| [ 6809.821951] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized! |
| [ 6809.822089] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input40 |
| [ 6813.191152] usb 1-1.6: reset high-speed USB device number 23 using ehci-pci |
| [ 6813.310294] usb 1-1.6: USB disconnect, device number 23 |
| [ 6813.451179] usb 1-1.6: new high-speed USB device number 24 using ehci-pci |
| [ 6813.566948] usb 1-1.6: New USB device found, idVendor=5986, idProduct=02d5, bcdDevice=10.11 |
| [ 6813.566956] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 6813.566959] usb 1-1.6: Product: Integrated Camera |
| [ 6813.566962] usb 1-1.6: Manufacturer: Ricoh Company Ltd. |
| [ 6813.568243] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:02d5) |
| [ 6813.574210] uvcvideo 1-1.6:1.0: Entity type for entity Extension 4 was not initialized! |
| [ 6813.574218] uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized! |
| [ 6813.574223] uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized! |
| [ 6813.574228] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized! |
| [ 6813.574458] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input41 |
| [ 6817.503298] usb 1-1.6: USB disconnect, device number 24 |
| [ 6823.983168] usb 1-1.6: new high-speed USB device number 25 using ehci-pci |
| [ 6824.098895] usb 1-1.6: New USB device found, idVendor=5986, idProduct=02d5, bcdDevice=10.11 |
| [ 6824.098903] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 6824.098906] usb 1-1.6: Product: Integrated Camera |
| [ 6824.098909] usb 1-1.6: Manufacturer: Ricoh Company Ltd. |
| [ 6824.100134] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:02d5) |
| [ 6824.106028] uvcvideo 1-1.6:1.0: Entity type for entity Extension 4 was not initialized! |
| [ 6824.106038] uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized! |
| [ 6824.106043] uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized! |
| [ 6824.106049] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized! |
| [ 6824.106272] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input42 |
| [ 6830.740967] usb 1-1.6: USB disconnect, device number 25 |
| [ 6834.879150] usb 1-1.6: new high-speed USB device number 26 using ehci-pci |
| [ 6834.994940] usb 1-1.6: New USB device found, idVendor=5986, idProduct=02d5, bcdDevice=10.11 |
| [ 6834.994947] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 6834.994950] usb 1-1.6: Product: Integrated Camera |
| [ 6834.994953] usb 1-1.6: Manufacturer: Ricoh Company Ltd. |
| [ 6834.996324] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:02d5) |
| [ 6835.002282] uvcvideo 1-1.6:1.0: Entity type for entity Extension 4 was not initialized! |
| [ 6835.002292] uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized! |
| [ 6835.002297] uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized! |
| [ 6835.002303] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized! |
| [ 6835.002522] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input43 |
| [ 6838.343147] usb 1-1.6: reset high-speed USB device number 26 using ehci-pci |
| [ 6843.883151] usb 1-1.6: reset high-speed USB device number 26 using ehci-pci |
| [ 6846.615185] usb 1-1.6: reset high-speed USB device number 26 using ehci-pci |
| [ 6846.730219] usb 1-1.6: USB disconnect, device number 26 |
| [ 6846.879164] usb 1-1.6: new high-speed USB device number 27 using ehci-pci |
| [ 6846.994863] usb 1-1.6: New USB device found, idVendor=5986, idProduct=02d5, bcdDevice=10.11 |
| [ 6846.994871] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 6846.994874] usb 1-1.6: Product: Integrated Camera |
| [ 6846.994877] usb 1-1.6: Manufacturer: Ricoh Company Ltd. |
| [ 6846.995991] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:02d5) |
| [ 6847.002316] uvcvideo 1-1.6:1.0: Entity type for entity Extension 4 was not initialized! |
| [ 6847.002323] uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized! |
| [ 6847.002328] uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized! |
| [ 6847.002332] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized! |
| [ 6847.002575] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input44 |
| [ 6850.455154] usb 1-1.6: reset high-speed USB device number 27 using ehci-pci |
| [ 6853.355448] usb 1-1.6: USB disconnect, device number 27 |
| [ 7011.847233] usb 1-1.6: new high-speed USB device number 29 using ehci-pci |
| [ 7011.967541] usb 1-1.6: New USB device found, idVendor=5986, idProduct=02d5, bcdDevice=10.11 |
| [ 7011.967550] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 7011.967553] usb 1-1.6: Product: Integrated Camera |
| [ 7011.967556] usb 1-1.6: Manufacturer: Ricoh Company Ltd. |
| [ 7011.968872] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:02d5) |
| [ 7011.974936] uvcvideo 1-1.6:1.0: Entity type for entity Extension 4 was not initialized! |
| [ 7011.974941] uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized! |
| [ 7011.974945] uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized! |
| [ 7011.974948] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized! |
| [ 7011.975081] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input45 |
| [ 7016.759281] usb 1-1.6: USB disconnect, device number 29 |
| [ 7038.219156] usb 1-1.6: new high-speed USB device number 30 using ehci-pci |
| [ 7038.338924] usb 1-1.6: New USB device found, idVendor=5986, idProduct=02d5, bcdDevice=10.11 |
| [ 7038.338931] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 7038.338935] usb 1-1.6: Product: Integrated Camera |
| [ 7038.338937] usb 1-1.6: Manufacturer: Ricoh Company Ltd. |
| [ 7038.340047] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:02d5) |
| [ 7038.346037] uvcvideo 1-1.6:1.0: Entity type for entity Extension 4 was not initialized! |
| [ 7038.346047] uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized! |
| [ 7038.346053] uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized! |
| [ 7038.346059] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized! |
| [ 7038.346283] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input46 |
| [12977.447424] usb 2-2: new high-speed USB device number 3 using xhci_hcd |
| [12977.673255] usb 2-2: New USB device found, idVendor=090c, idProduct=1000, bcdDevice=11.00 |
| [12977.673262] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [12977.673265] usb 2-2: Product: USB Flash Disk |
| [12977.673267] usb 2-2: Manufacturer: General |
| [12977.673270] usb 2-2: SerialNumber: 5411040000007369 |
| [12978.252368] usb-storage 2-2:1.0: USB Mass Storage device detected |
| [12978.255470] scsi host6: usb-storage 2-2:1.0 |
| [12978.255590] usbcore: registered new interface driver usb-storage |
| [12978.259129] usbcore: registered new interface driver uas |
| [12979.411774] scsi 6:0:0:0: Direct-Access General USB Flash Disk 1100 PQ: 0 ANSI: 0 CCS |
| [12979.412482] sd 6:0:0:0: Attached scsi generic sg3 type 0 |
| [12979.412613] sd 6:0:0:0: [sdd] 7925760 512-byte logical blocks: (4.06 GB/3.78 GiB) |
| [12979.413057] sd 6:0:0:0: [sdd] Write Protect is off |
| [12979.413060] sd 6:0:0:0: [sdd] Mode Sense: 43 00 00 00 |
| [12979.413514] sd 6:0:0:0: [sdd] No Caching mode page found |
| [12979.413517] sd 6:0:0:0: [sdd] Assuming drive cache: write through |
| [12979.415753] sdd: sdd1 |
| [12979.417156] sd 6:0:0:0: [sdd] Attached SCSI removable disk |
| [12979.684262] FAT-fs (sdd1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. |
| [13034.050425] usb 2-2: USB disconnect, device number 3 |
| [19583.127295] audit: type=1400 audit(1556748002.976:42): apparmor="DENIED" operation="open" profile="/usr/sbin/cups-browsed" name="/usr/share/cups/locale/" pid=471 comm="cups-browsed" requested_mask="r" denied_mask="r" fsuid=0 ouid=0 |
| [19583.127308] audit: type=1400 audit(1556748002.976:43): apparmor="DENIED" operation="open" profile="/usr/sbin/cups-browsed" name="/usr/share/locale/" pid=471 comm="cups-browsed" requested_mask="r" denied_mask="r" fsuid=0 ouid=0 |
| [21160.711762] usb 2-2: new high-speed USB device number 4 using xhci_hcd |
| [21160.937498] usb 2-2: New USB device found, idVendor=090c, idProduct=1000, bcdDevice=11.00 |
| [21160.937505] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [21160.937508] usb 2-2: Product: USB Flash Disk |
| [21160.937511] usb 2-2: Manufacturer: General |
| [21160.937514] usb 2-2: SerialNumber: 5411040000007369 |
| [21160.938200] usb-storage 2-2:1.0: USB Mass Storage device detected |
| [21160.938415] scsi host6: usb-storage 2-2:1.0 |
| [21162.098820] scsi 6:0:0:0: Direct-Access General USB Flash Disk 1100 PQ: 0 ANSI: 0 CCS |
| [21162.099171] sd 6:0:0:0: Attached scsi generic sg3 type 0 |
| [21162.099377] sd 6:0:0:0: [sdd] 7925760 512-byte logical blocks: (4.06 GB/3.78 GiB) |
| [21162.099825] sd 6:0:0:0: [sdd] Write Protect is off |
| [21162.099830] sd 6:0:0:0: [sdd] Mode Sense: 43 00 00 00 |
| [21162.100256] sd 6:0:0:0: [sdd] No Caching mode page found |
| [21162.100259] sd 6:0:0:0: [sdd] Assuming drive cache: write through |
| [21162.102440] sdd: sdd1 |
| [21162.103891] sd 6:0:0:0: [sdd] Attached SCSI removable disk |
| [21162.506782] FAT-fs (sdd1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. |
| [21171.939999] usb 1-1.6: USB disconnect, device number 30 |
| [21319.785066] usb 2-2: USB disconnect, device number 4 |
| [24482.003515] e1000e: enp0s25 NIC Link is Down |
| [24482.176213] PM: suspend entry (deep) |
| [24482.176216] PM: Syncing filesystems ... done. |
| [24482.185629] Freezing user space processes ... (elapsed 0.002 seconds) done. |
| [24482.187746] OOM killer disabled. |
| [24482.187746] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. |
| [24482.188971] printk: Suspending console(s) (use no_console_suspend to debug) |
| [24482.208109] sd 2:0:0:0: [sdc] Synchronizing SCSI cache |
| [24482.213507] sd 2:0:0:0: [sdc] Stopping disk |
| [24482.331965] sd 0:0:0:0: [sda] Synchronizing SCSI cache |
| [24482.334177] sd 0:0:0:0: [sda] Stopping disk |
| [24482.347961] sd 1:0:0:0: [sdb] Synchronizing SCSI cache |
| [24482.348226] sd 1:0:0:0: [sdb] Stopping disk |
| [24482.531137] e1000e: EEE TX LPI TIMER: 00000011 |
| [24483.316957] ACPI: EC: interrupt blocked |
| [24483.360452] ACPI: Preparing to enter system sleep state S3 |
| [24483.363473] ACPI: EC: event blocked |
| [24483.363474] ACPI: EC: EC stopped |
| [24483.363474] PM: Saving platform NVS memory |
| [24483.363476] Disabling non-boot CPUs ... |
| [24483.365238] smpboot: CPU 1 is now offline |
| [24483.369619] IRQ 31: no longer affine to CPU2 |
| [24483.370652] smpboot: CPU 2 is now offline |
| [24483.374219] IRQ 17: no longer affine to CPU3 |
| [24483.374224] IRQ 19: no longer affine to CPU3 |
| [24483.374229] IRQ 26: no longer affine to CPU3 |
| [24483.374233] IRQ 27: no longer affine to CPU3 |
| [24483.375239] smpboot: CPU 3 is now offline |
| [24483.378290] ACPI: Low-level resume complete |
| [24483.378326] ACPI: EC: EC started |
| [24483.378326] PM: Restoring platform NVS memory |
| [24483.378652] Enabling non-boot CPUs ... |
| [24483.378690] x86: Booting SMP configuration: |
| [24483.378690] smpboot: Booting Node 0 Processor 1 APIC 0x1 |
| [24483.381224] cache: parent cpu1 should not be sleeping |
| [24483.381797] CPU1 is up |
| [24483.381822] smpboot: Booting Node 0 Processor 2 APIC 0x2 |
| [24483.384260] cache: parent cpu2 should not be sleeping |
| [24483.384673] CPU2 is up |
| [24483.384714] smpboot: Booting Node 0 Processor 3 APIC 0x3 |
| [24483.387523] cache: parent cpu3 should not be sleeping |
| [24483.387961] CPU3 is up |
| [24483.394778] ACPI: Waking up from system sleep state S3 |
| [24483.397458] ACPI: EC: interrupt unblocked |
| [24483.417802] sdhci-pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz. |
| [24483.439411] ACPI: EC: event unblocked |
| [24483.453912] sd 0:0:0:0: [sda] Starting disk |
| [24483.453914] sd 1:0:0:0: [sdb] Starting disk |
| [24483.454262] sd 2:0:0:0: [sdc] Starting disk |
| [24483.556133] usb 4-3: Disable of device-initiated U1 failed. |
| [24483.559635] usb 4-3: Disable of device-initiated U2 failed. |
| [24483.697193] usb 1-1.4: reset full-speed USB device number 4 using ehci-pci |
| [24483.697200] usb 3-1.5: reset high-speed USB device number 3 using ehci-pci |
| [24483.750370] usb 4-3: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd |
| [24483.751395] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) |
| [24483.751422] ata5: SATA link down (SStatus 0 SControl 300) |
| [24483.751794] ata3.00: supports DRM functions and may not be fully accessible |
| [24483.752570] ata3.00: Trusted Computing capability qword not valid! |
| [24483.752996] ata3.00: supports DRM functions and may not be fully accessible |
| [24483.753809] ata3.00: Trusted Computing capability qword not valid! |
| [24483.753813] ata3.00: configured for UDMA/133 |
| [24483.755462] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [24483.755811] ata1.00: configured for UDMA/133 |
| [24483.791019] psmouse serio1: synaptics: queried max coordinates: x [..5470], y [..4498] |
| [24483.953304] sdhci-pci 0000:02:00.0: Will use DMA mode even though HW doesn't fully claim to support it. |
| [24484.017519] usb 2-3: reset high-speed USB device number 2 using xhci_hcd |
| [24484.101304] usb 3-1.5.1: reset full-speed USB device number 4 using ehci-pci |
| [24484.222380] input input9: event field not found |
| [24484.222387] input input9: event field not found |
| [24484.222390] input input9: event field not found |
| [24484.222392] input input9: event field not found |
| [24484.222395] input input9: event field not found |
| [24484.222396] input input9: event field not found |
| [24484.222398] input input9: event field not found |
| [24484.222399] input input9: event field not found |
| [24484.293327] usb 3-1.5.6: reset high-speed USB device number 5 using ehci-pci |
| [24484.481306] usb 3-1.5.2: reset full-speed USB device number 6 using ehci-pci |
| [24484.697297] usb 3-1.5.6.1: reset high-speed USB device number 7 using ehci-pci |
| [24485.101264] usb 3-1.5.6.1.2: reset full-speed USB device number 9 using ehci-pci |
| [24485.211369] usblp2: removed |
| [24485.289245] usb 3-1.5.6.1.3: reset full-speed USB device number 10 using ehci-pci |
| [24485.398704] pl2303 ttyUSB0: pl2303 converter now disconnected from ttyUSB0 |
| [24485.398732] pl2303 3-1.5.6.1.3:1.0: device disconnected |
| [24486.449319] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [24486.536804] ata2.00: configured for UDMA/133 |
| [24487.420430] OOM killer enabled. |
| [24487.420433] Restarting tasks ... |
| [24487.427360] pl2303 3-1.5.6.1.3:1.0: pl2303 converter detected |
| [24487.429510] usb 3-1.5.6.2: USB disconnect, device number 11 |
| [24487.430362] usb 3-1.5.6.1.3: pl2303 converter now attached to ttyUSB0 |
| [24487.431302] usblp 3-1.5.6.1.2:1.0: usblp2: USB Bidirectional printer dev 9 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 |
| [24487.445196] done. |
| [24487.480761] video LNXVIDEO:00: Restoring backlight state |
| [24487.519614] PM: suspend exit |
| [24487.593190] usb 1-1.6: new high-speed USB device number 31 using ehci-pci |
| [24487.622958] Bluetooth: hci0: BCM: chip id 63 |
| [24487.623955] Bluetooth: hci0: BCM: features 0x07 |
| [24487.639963] Bluetooth: hci0: BCM20702A |
| [24487.641215] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000 |
| [24487.641291] bluetooth hci0: firmware: direct-loading firmware brcm/BCM20702A1-0a5c-21e6.hcd |
| [24487.713448] usb 1-1.6: New USB device found, idVendor=5986, idProduct=02d5, bcdDevice=10.11 |
| [24487.713453] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [24487.713455] usb 1-1.6: Product: Integrated Camera |
| [24487.713457] usb 1-1.6: Manufacturer: Ricoh Company Ltd. |
| [24487.714589] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:02d5) |
| [24487.721492] uvcvideo 1-1.6:1.0: Entity type for entity Extension 4 was not initialized! |
| [24487.721496] uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized! |
| [24487.721499] uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized! |
| [24487.721501] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized! |
| [24487.721616] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input47 |
| [24488.354615] ERROR @wl_cfg80211_scan : |
| [24488.354617] WLC_SCAN error (-22) |
| [24489.506936] Bluetooth: hci0: BCM20702A1 (001.002.014) build 1669 |
| [24489.522948] Bluetooth: hci0: Broadcom Bluetooth Device |
| [24491.495183] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None |
| [24491.495222] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready |
| [24496.214859] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready |
| [24497.195191] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None |
| [24498.281213] usb 3-1.5.6.2: new high-speed USB device number 12 using ehci-pci |
| [24498.390870] usb 3-1.5.6.2: New USB device found, idVendor=0409, idProduct=0058, bcdDevice= 1.00 |
| [24498.390875] usb 3-1.5.6.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [24498.390877] usb 3-1.5.6.2: Product: USB2.0 Hub Controller |
| [24498.390880] usb 3-1.5.6.2: Manufacturer: NEC Corporation |
| [24498.391319] hub 3-1.5.6.2:1.0: USB hub found |
| [24498.391540] hub 3-1.5.6.2:1.0: 4 ports detected |
| [24787.912461] Process accounting resumed |
| [25222.209384] usb 1-1.6: USB disconnect, device number 31 |