| [ 0.000000] Linux version 5.4.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 9.2.1 20191130 (Debian 9.2.1-21)) #1 SMP Debian 5.4.6-1 (2019-12-27) |
| [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-5.4.0-1-amd64 root=/dev/mapper/TP--T430s--vg-root ro iomem=relaxed |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' |
| [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 |
| [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. |
| [ 0.000000] BIOS-provided physical RAM map: |
| [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ff27fff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000007ff28000-0x00000000829fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000047b5fffff] usable |
| [ 0.000000] NX (Execute Disable) protection: active |
| [ 0.000000] SMBIOS 2.8 present. |
| [ 0.000000] DMI: LENOVO 23532NU/23532NU, BIOS CBET4000 4.11-649-g6ad0ab1a69 12/31/2019 |
| [ 0.000000] tsc: Fast TSC calibration using PIT |
| [ 0.000000] tsc: Detected 2893.496 MHz processor |
| [ 0.002031] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| [ 0.002032] e820: remove [mem 0x000a0000-0x000fffff] usable |
| [ 0.002035] last_pfn = 0x47b600 max_arch_pfn = 0x400000000 |
| [ 0.002040] MTRR default type: write-back |
| [ 0.002040] MTRR fixed ranges enabled: |
| [ 0.002041] 00000-9FFFF write-back |
| [ 0.002042] A0000-BFFFF uncachable |
| [ 0.002043] C0000-FFFFF write-back |
| [ 0.002043] MTRR variable ranges enabled: |
| [ 0.002044] 0 base 080000000 mask FC0000000 uncachable |
| [ 0.002045] 1 base 0C0000000 mask FF0000000 uncachable |
| [ 0.002046] 2 base 0D0000000 mask FF0000000 write-combining |
| [ 0.002047] 3 base 0E0000000 mask FE0000000 uncachable |
| [ 0.002047] 4 disabled |
| [ 0.002047] 5 disabled |
| [ 0.002048] 6 disabled |
| [ 0.002048] 7 disabled |
| [ 0.002049] 8 disabled |
| [ 0.002049] 9 disabled |
| [ 0.002329] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT |
| [ 0.002688] last_pfn = 0x7ff28 max_arch_pfn = 0x400000000 |
| [ 0.012088] BRK [0x124c01000, 0x124c01fff] PGTABLE |
| [ 0.012090] BRK [0x124c02000, 0x124c02fff] PGTABLE |
| [ 0.012091] BRK [0x124c03000, 0x124c03fff] PGTABLE |
| [ 0.012111] BRK [0x124c04000, 0x124c04fff] PGTABLE |
| [ 0.012112] BRK [0x124c05000, 0x124c05fff] PGTABLE |
| [ 0.012169] BRK [0x124c06000, 0x124c06fff] PGTABLE |
| [ 0.012184] BRK [0x124c07000, 0x124c07fff] PGTABLE |
| [ 0.012352] RAMDISK: [mem 0x30d7f000-0x346b6fff] |
| [ 0.012358] ACPI: Early table checksum verification disabled |
| [ 0.012361] ACPI: RSDP 0x00000000000F6750 000024 (v02 COREv4) |
| [ 0.012364] ACPI: XSDT 0x000000007FF4E0E0 00005C (v01 COREv4 COREBOOT 00000000 CORE 20190703) |
| [ 0.012369] ACPI: FACP 0x000000007FF51C40 0000F4 (v04 COREv4 COREBOOT 00000000 CORE 20190703) |
| [ 0.012374] ACPI: DSDT 0x000000007FF4E280 0039C0 (v02 COREv4 COREBOOT 20110725 INTL 20190703) |
| [ 0.012376] ACPI: FACS 0x000000007FF4E240 000040 |
| [ 0.012378] ACPI: FACS 0x000000007FF4E240 000040 |
| [ 0.012381] ACPI: SSDT 0x000000007FF51D40 001B03 (v02 COREv4 COREBOOT 0000002A CORE 20190703) |
| [ 0.012383] ACPI: MCFG 0x000000007FF53850 00003C (v01 COREv4 COREBOOT 00000000 CORE 20190703) |
| [ 0.012386] ACPI: TCPA 0x000000007FF53890 000032 (v02 COREv4 COREBOOT 00000000 CORE 20190703) |
| [ 0.012388] ACPI: APIC 0x000000007FF538D0 00006C (v02 COREv4 COREBOOT 00000000 CORE 20190703) |
| [ 0.012391] ACPI: DMAR 0x000000007FF53940 0000D0 (v01 COREv4 COREBOOT 00000000 CORE 20190703) |
| [ 0.012393] ACPI: HPET 0x000000007FF55A10 000038 (v01 COREv4 COREBOOT 00000000 CORE 20190703) |
| [ 0.012400] ACPI: Local APIC address 0xfee00000 |
| [ 0.012472] No NUMA configuration found |
| [ 0.012473] Faking a node at [mem 0x0000000000000000-0x000000047b5fffff] |
| [ 0.012476] NODE_DATA(0) allocated [mem 0x47b5ee000-0x47b5f2fff] |
| [ 0.012506] Zone ranges: |
| [ 0.012507] DMA [mem 0x0000000000001000-0x0000000000ffffff] |
| [ 0.012508] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] |
| [ 0.012509] Normal [mem 0x0000000100000000-0x000000047b5fffff] |
| [ 0.012510] Device empty |
| [ 0.012511] Movable zone start for each node |
| [ 0.012512] Early memory node ranges |
| [ 0.012513] node 0: [mem 0x0000000000001000-0x000000000009efff] |
| [ 0.012514] node 0: [mem 0x0000000000100000-0x000000007ff27fff] |
| [ 0.012515] node 0: [mem 0x0000000100000000-0x000000047b5fffff] |
| [ 0.012525] Zeroed struct page in unavailable ranges: 314 pages |
| [ 0.012526] Initmem setup node 0 [mem 0x0000000000001000-0x000000047b5fffff] |
| [ 0.012527] On node 0 totalpages: 4175046 |
| [ 0.012528] DMA zone: 64 pages used for memmap |
| [ 0.012529] DMA zone: 21 pages reserved |
| [ 0.012530] DMA zone: 3998 pages, LIFO batch:0 |
| [ 0.012578] DMA32 zone: 8125 pages used for memmap |
| [ 0.012579] DMA32 zone: 519976 pages, LIFO batch:63 |
| [ 0.020665] Normal zone: 57048 pages used for memmap |
| [ 0.020666] Normal zone: 3651072 pages, LIFO batch:63 |
| [ 0.060636] Reserving Intel graphics memory at [mem 0x80a00000-0x829fffff] |
| [ 0.061005] ACPI: PM-Timer IO Port: 0x508 |
| [ 0.061008] ACPI: Local APIC address 0xfee00000 |
| [ 0.061023] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 |
| [ 0.061025] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) |
| [ 0.061027] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) |
| [ 0.061028] ACPI: IRQ0 used by override. |
| [ 0.061029] ACPI: IRQ9 used by override. |
| [ 0.061031] Using ACPI (MADT) for SMP configuration information |
| [ 0.061032] ACPI: HPET id: 0x8086a701 base: 0xfed00000 |
| [ 0.061037] smpboot: Allowing 4 CPUs, 0 hotplug CPUs |
| [ 0.061046] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] |
| [ 0.061047] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] |
| [ 0.061048] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] |
| [ 0.061049] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] |
| [ 0.061050] PM: Registered nosave memory: [mem 0x7ff28000-0x829fffff] |
| [ 0.061051] PM: Registered nosave memory: [mem 0x82a00000-0xefffffff] |
| [ 0.061052] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff] |
| [ 0.061052] PM: Registered nosave memory: [mem 0xf4000000-0xfed3ffff] |
| [ 0.061053] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff] |
| [ 0.061054] PM: Registered nosave memory: [mem 0xfed45000-0xfed8ffff] |
| [ 0.061054] PM: Registered nosave memory: [mem 0xfed90000-0xfed91fff] |
| [ 0.061055] PM: Registered nosave memory: [mem 0xfed92000-0xffffffff] |
| [ 0.061057] [mem 0x82a00000-0xefffffff] available for PCI devices |
| [ 0.061058] Booting paravirtualized kernel on bare hardware |
| [ 0.061061] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns |
| [ 0.147707] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 |
| [ 0.147885] percpu: Embedded 53 pages/cpu s178584 r8192 d30312 u524288 |
| [ 0.147893] pcpu-alloc: s178584 r8192 d30312 u524288 alloc=1*2097152 |
| [ 0.147893] pcpu-alloc: [0] 0 1 2 3 |
| [ 0.147912] Built 1 zonelists, mobility grouping on. Total pages: 4109788 |
| [ 0.147913] Policy zone: Normal |
| [ 0.147914] Kernel command line: BOOT_IMAGE=/vmlinuz-5.4.0-1-amd64 root=/dev/mapper/TP--T430s--vg-root ro iomem=relaxed |
| [ 0.148705] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) |
| [ 0.149081] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) |
| [ 0.149129] mem auto-init: stack:off, heap alloc:off, heap free:off |
| [ 0.152132] Calgary: detecting Calgary via BIOS EBDA area |
| [ 0.152138] Calgary: Unable to locate Rio Grande table in EBDA - bailing! |
| [ 0.190524] Memory: 16263248K/16700184K available (10243K kernel code, 1196K rwdata, 3732K rodata, 1668K init, 2060K bss, 436936K reserved, 0K cma-reserved) |
| [ 0.190629] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 |
| [ 0.190640] Kernel/User page tables isolation: enabled |
| [ 0.190653] ftrace: allocating 33546 entries in 132 pages |
| [ 0.202099] rcu: Hierarchical RCU implementation. |
| [ 0.202101] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4. |
| [ 0.202102] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. |
| [ 0.202103] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 |
| [ 0.204776] NR_IRQS: 33024, nr_irqs: 456, preallocated irqs: 16 |
| [ 0.204984] random: crng done (trusting CPU's manufacturer) |
| [ 0.206555] Console: colour VGA+ 80x25 |
| [ 0.212067] printk: console [tty0] enabled |
| [ 0.212134] ACPI: Core revision 20190816 |
| [ 0.212253] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns |
| [ 0.212337] APIC: Switch to symmetric I/O mode setup |
| [ 0.212396] DMAR: Host address width 36 |
| [ 0.212452] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 |
| [ 0.212511] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a |
| [ 0.212581] DMAR: RMRR base: 0x00000080800000 end: 0x000000829fffff |
| [ 0.212639] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 |
| [ 0.212697] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a |
| [ 0.212766] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 |
| [ 0.212825] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 |
| [ 0.212883] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. |
| [ 0.213340] DMAR-IR: Enabled IRQ remapping in x2apic mode |
| [ 0.213398] x2apic enabled |
| [ 0.213457] Switched APIC routing to cluster x2apic. |
| [ 0.213947] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 |
| [ 0.232337] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x29b5430a84a, max_idle_ns: 440795296009 ns |
| [ 0.232414] Calibrating delay loop (skipped), value calculated using timer frequency.. 5786.99 BogoMIPS (lpj=11573984) |
| [ 0.232489] pid_max: default: 32768 minimum: 301 |
| [ 0.232569] LSM: Security Framework initializing |
| [ 0.232629] Yama: disabled by default; enable with sysctl kernel.yama.* |
| [ 0.232703] AppArmor: AppArmor initialized |
| [ 0.232759] TOMOYO Linux initialized |
| [ 0.232852] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) |
| [ 0.232948] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) |
| [ 0.233233] mce: CPU0: Thermal monitoring enabled (TM1) |
| [ 0.233296] process: using mwait in idle threads |
| [ 0.233353] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 |
| [ 0.233410] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 |
| [ 0.233469] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization |
| [ 0.233540] Spectre V2 : Mitigation: Full generic retpoline |
| [ 0.233598] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch |
| [ 0.233669] Spectre V2 : Enabling Restricted Speculation for firmware calls |
| [ 0.233728] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier |
| [ 0.233798] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl |
| [ 0.233858] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp |
| [ 0.233932] MDS: Mitigation: Clear CPU buffers |
| [ 0.234137] Freeing SMP alternatives memory: 24K |
| [ 0.235793] TSC deadline timer enabled |
| [ 0.235796] smpboot: CPU0: Intel(R) Core(TM) i7-3520M CPU @ 2.90GHz (family: 0x6, model: 0x3a, stepping: 0x9) |
| [ 0.235965] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. |
| [ 0.236044] ... version: 3 |
| [ 0.236100] ... bit width: 48 |
| [ 0.236155] ... generic registers: 4 |
| [ 0.236210] ... value mask: 0000ffffffffffff |
| [ 0.236268] ... max period: 00007fffffffffff |
| [ 0.236325] ... fixed-purpose events: 3 |
| [ 0.236381] ... event mask: 000000070000000f |
| [ 0.236411] rcu: Hierarchical SRCU implementation. |
| [ 0.236411] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. |
| [ 0.236411] smp: Bringing up secondary CPUs ... |
| [ 0.236411] x86: Booting SMP configuration: |
| [ 0.236411] .... node #0, CPUs: #1 |
| [ 0.236494] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. |
| [ 0.236662] #2 #3 |
| [ 0.242492] smp: Brought up 1 node, 4 CPUs |
| [ 0.242492] smpboot: Max logical packages: 1 |
| [ 0.242492] smpboot: Total of 4 processors activated (23147.96 BogoMIPS) |
| [ 0.242492] devtmpfs: initialized |
| [ 0.242492] x86/mm: Memory block size: 128MB |
| [ 0.245761] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns |
| [ 0.245761] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) |
| [ 0.245761] pinctrl core: initialized pinctrl subsystem |
| [ 0.245761] NET: Registered protocol family 16 |
| [ 0.245761] audit: initializing netlink subsys (disabled) |
| [ 0.245761] audit: type=2000 audit(1577843345.032:1): state=initialized audit_enabled=0 res=1 |
| [ 0.245761] cpuidle: using governor ladder |
| [ 0.245761] cpuidle: using governor menu |
| [ 0.245761] ACPI: bus type PCI registered |
| [ 0.245761] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 |
| [ 0.246025] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) |
| [ 0.246100] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 |
| [ 0.246166] PCI: Using configuration type 1 for base access |
| [ 0.246236] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on |
| [ 0.249155] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages |
| [ 0.396612] ACPI: Added _OSI(Module Device) |
| [ 0.396612] ACPI: Added _OSI(Processor Device) |
| [ 0.396612] ACPI: Added _OSI(3.0 _SCP Extensions) |
| [ 0.396652] ACPI: Added _OSI(Processor Aggregator Device) |
| [ 0.396710] ACPI: Added _OSI(Linux-Dell-Video) |
| [ 0.396768] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) |
| [ 0.396825] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) |
| [ 0.398901] ACPI: 2 ACPI AML tables successfully acquired and loaded |
| [ 0.401072] ACPI: EC: EC started |
| [ 0.401126] ACPI: EC: interrupt blocked |
| [ 0.401500] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC |
| [ 0.401558] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62 |
| [ 0.401629] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC used to handle transactions |
| [ 0.401698] ACPI: Interpreter enabled |
| [ 0.401769] ACPI: (supports S0 S3 S4 S5) |
| [ 0.401824] ACPI: Using IOAPIC for interrupt routing |
| [ 0.401894] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| [ 0.402072] ACPI: Enabled 1 GPEs in block 00 to 3F |
| [ 0.405146] ACPI: Power Resource [FPWR] (off) |
| [ 0.405447] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) |
| [ 0.405509] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] |
| [ 0.405617] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] |
| [ 0.405696] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge |
| [ 0.405810] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff window] (conflicts with Video ROM [mem 0x000c0000-0x000cf1ff]) |
| [ 0.405889] acpi PNP0A08:00: ignoring host bridge window [mem 0x000d0000-0x000d3fff window] (conflicts with Adapter ROM [mem 0x000cf800-0x000d05ff]) |
| [ 0.406095] PCI host bridge to bus 0000:00 |
| [ 0.406152] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] |
| [ 0.406212] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] |
| [ 0.406271] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] |
| [ 0.406341] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] |
| [ 0.406411] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] |
| [ 0.406481] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] |
| [ 0.406549] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] |
| [ 0.406619] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] |
| [ 0.406687] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] |
| [ 0.406757] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] |
| [ 0.406825] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] |
| [ 0.406894] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window] |
| [ 0.406960] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window] |
| [ 0.407029] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window] |
| [ 0.407098] pci_bus 0000:00: root bus resource [mem 0x82a00000-0xefffffff window] |
| [ 0.407165] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] |
| [ 0.407235] pci_bus 0000:00: root bus resource [bus 00-ff] |
| [ 0.407299] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000 |
| [ 0.407442] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000 |
| [ 0.407511] pci 0000:00:02.0: reg 0x10: [mem 0xe2400000-0xe27fffff 64bit] |
| [ 0.407574] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref] |
| [ 0.407646] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f] |
| [ 0.407774] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000 |
| [ 0.407841] pci 0000:00:04.0: reg 0x10: [mem 0xe2b30000-0xe2b37fff 64bit] |
| [ 0.407983] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330 |
| [ 0.408062] pci 0000:00:14.0: reg 0x10: [mem 0xe2b20000-0xe2b2ffff 64bit] |
| [ 0.408186] pci 0000:00:14.0: PME# supported from D3hot D3cold |
| [ 0.408319] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000 |
| [ 0.408396] pci 0000:00:19.0: reg 0x10: [mem 0xe2b00000-0xe2b1ffff] |
| [ 0.408421] pci 0000:00:19.0: reg 0x14: [mem 0xe2b3c000-0xe2b3cfff] |
| [ 0.408486] pci 0000:00:19.0: reg 0x18: [io 0x4040-0x405f] |
| [ 0.408600] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold |
| [ 0.408718] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 |
| [ 0.408796] pci 0000:00:1a.0: reg 0x10: [mem 0xe2b3f000-0xe2b3f3ff] |
| [ 0.408936] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold |
| [ 0.409066] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300 |
| [ 0.409144] pci 0000:00:1b.0: reg 0x10: [mem 0xe2b38000-0xe2b3bfff 64bit] |
| [ 0.409273] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold |
| [ 0.409407] pci 0000:00:1c.0: [8086:1e12] type 01 class 0x060400 |
| [ 0.409618] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold |
| [ 0.409705] pci 0000:00:1c.0: Enabling MPC IRBNCE |
| [ 0.409762] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled |
| [ 0.409902] pci 0000:00:1c.1: [8086:1e14] type 01 class 0x060400 |
| [ 0.410134] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold |
| [ 0.410219] pci 0000:00:1c.1: Enabling MPC IRBNCE |
| [ 0.410276] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled |
| [ 0.410414] pci 0000:00:1c.2: [8086:1e18] type 01 class 0x060400 |
| [ 0.410649] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold |
| [ 0.410734] pci 0000:00:1c.2: Enabling MPC IRBNCE |
| [ 0.410792] pci 0000:00:1c.2: Intel PCH root port ACS workaround enabled |
| [ 0.410930] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 |
| [ 0.411007] pci 0000:00:1d.0: reg 0x10: [mem 0xe2b40000-0xe2b403ff] |
| [ 0.411145] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold |
| [ 0.411274] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100 |
| [ 0.411497] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601 |
| [ 0.411572] pci 0000:00:1f.2: reg 0x10: [io 0x4080-0x4087] |
| [ 0.411635] pci 0000:00:1f.2: reg 0x14: [io 0x4090-0x4093] |
| [ 0.411698] pci 0000:00:1f.2: reg 0x18: [io 0x4088-0x408f] |
| [ 0.411762] pci 0000:00:1f.2: reg 0x1c: [io 0x4094-0x4097] |
| [ 0.411827] pci 0000:00:1f.2: reg 0x20: [io 0x4060-0x407f] |
| [ 0.411891] pci 0000:00:1f.2: reg 0x24: [mem 0xe2b3e000-0xe2b3e7ff] |
| [ 0.411991] pci 0000:00:1f.2: PME# supported from D3hot |
| [ 0.412114] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500 |
| [ 0.412190] pci 0000:00:1f.3: reg 0x10: [mem 0xe2b41000-0xe2b410ff 64bit] |
| [ 0.412267] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f] |
| [ 0.412409] pci 0000:00:1f.6: [8086:1e24] type 00 class 0x118000 |
| [ 0.412436] pci 0000:00:1f.6: reg 0x10: [mem 0xe2b3d000-0xe2b3dfff 64bit] |
| [ 0.412711] pci 0000:01:00.0: [14e4:43a0] type 00 class 0x028000 |
| [ 0.412863] pci 0000:01:00.0: reg 0x10: [mem 0xe2a00000-0xe2a07fff 64bit] |
| [ 0.412980] pci 0000:01:00.0: reg 0x18: [mem 0xe2800000-0xe29fffff 64bit] |
| [ 0.413288] pci 0000:01:00.0: supports D1 D2 |
| [ 0.413344] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.413676] pci 0000:00:1c.0: PCI bridge to [bus 01] |
| [ 0.413739] pci 0000:00:1c.0: bridge window [mem 0xe2800000-0xe2afffff] |
| [ 0.413938] pci 0000:02:00.0: [1180:e822] type 00 class 0x080500 |
| [ 0.414229] pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz. |
| [ 0.414530] pci 0000:02:00.0: reg 0x10: [mem 0xe0800000-0xe08000ff] |
| [ 0.415096] pci 0000:02:00.0: supports D1 D2 |
| [ 0.415153] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.415775] pci 0000:00:1c.1: PCI bridge to [bus 02] |
| [ 0.415835] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff] |
| [ 0.415897] pci 0000:00:1c.1: bridge window [mem 0xe0000000-0xe08fffff] |
| [ 0.415964] pci 0000:00:1c.1: bridge window [mem 0xe0c00000-0xe13fffff 64bit pref] |
| [ 0.416101] pci 0000:00:1c.2: PCI bridge to [bus 03] |
| [ 0.416161] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff] |
| [ 0.416222] pci 0000:00:1c.2: bridge window [mem 0xe1c00000-0xe23fffff] |
| [ 0.416288] pci 0000:00:1c.2: bridge window [mem 0xe1400000-0xe1bfffff 64bit pref] |
| [ 0.416510] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.416608] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.416701] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.416793] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.416884] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.416977] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.417069] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.417162] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.417975] ACPI: EC: interrupt unblocked |
| [ 0.418038] ACPI: EC: event unblocked |
| [ 0.418098] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62 |
| [ 0.418167] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC used to handle transactions and events |
| [ 0.418285] iommu: Default domain type: Translated |
| [ 0.418351] pci 0000:00:02.0: vgaarb: setting as boot VGA device |
| [ 0.418351] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none |
| [ 0.418351] pci 0000:00:02.0: vgaarb: bridge control possible |
| [ 0.418351] vgaarb: loaded |
| [ 0.418351] EDAC MC: Ver: 3.0.0 |
| [ 0.418351] PCI: Using ACPI for IRQ routing |
| [ 0.420436] PCI: pci_cache_line_size set to 64 bytes |
| [ 0.420962] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] |
| [ 0.420963] e820: reserve RAM buffer [mem 0x7ff28000-0x7fffffff] |
| [ 0.420964] e820: reserve RAM buffer [mem 0x47b600000-0x47bffffff] |
| [ 0.421537] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 |
| [ 0.421599] hpet0: 8 comparators, 64-bit 14.318180 MHz counter |
| [ 0.423677] clocksource: Switched to clocksource tsc-early |
| [ 0.429487] VFS: Disk quotas dquot_6.6.0 |
| [ 0.429558] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) |
| [ 0.429713] AppArmor: AppArmor Filesystem Enabled |
| [ 0.429787] pnp: PnP ACPI init |
| [ 0.429974] pnp 00:00: [Firmware Bug]: PNP resource [mem 0xf0000000-0x12fffffff] covers only part of 0000:00:00.0 Intel MCH; extending to [mem 0xfed10000-0xfed17fff] |
| [ 0.430082] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved |
| [ 0.430141] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved |
| [ 0.430200] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved |
| [ 0.430258] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved |
| [ 0.431522] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved |
| [ 0.431581] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved |
| [ 0.431641] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved |
| [ 0.431700] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved |
| [ 0.431760] system 00:00: [mem 0x20000000-0x201fffff] could not be reserved |
| [ 0.431821] system 00:00: [mem 0x40000000-0x401fffff] could not be reserved |
| [ 0.431884] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) |
| [ 0.432306] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved |
| [ 0.432369] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) |
| [ 0.432400] system 00:02: [io 0x0500-0x057f] has been reserved |
| [ 0.432466] system 00:02: [io 0x0480-0x04bf] has been reserved |
| [ 0.432526] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) |
| [ 0.432543] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) |
| [ 0.432567] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) |
| [ 0.432586] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active) |
| [ 0.432605] pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active) |
| [ 0.432621] pnp: PnP ACPI: found 7 devices |
| [ 0.433681] thermal_sys: Registered thermal governor 'fair_share' |
| [ 0.433681] thermal_sys: Registered thermal governor 'bang_bang' |
| [ 0.433741] thermal_sys: Registered thermal governor 'step_wise' |
| [ 0.433799] thermal_sys: Registered thermal governor 'user_space' |
| [ 0.438350] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns |
| [ 0.438511] pci 0000:00:1c.0: PCI bridge to [bus 01] |
| [ 0.438576] pci 0000:00:1c.0: bridge window [mem 0xe2800000-0xe2afffff] |
| [ 0.438645] pci 0000:00:1c.1: PCI bridge to [bus 02] |
| [ 0.438704] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff] |
| [ 0.438769] pci 0000:00:1c.1: bridge window [mem 0xe0000000-0xe08fffff] |
| [ 0.438830] pci 0000:00:1c.1: bridge window [mem 0xe0c00000-0xe13fffff 64bit pref] |
| [ 0.438907] pci 0000:00:1c.2: PCI bridge to [bus 03] |
| [ 0.438964] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff] |
| [ 0.439028] pci 0000:00:1c.2: bridge window [mem 0xe1c00000-0xe23fffff] |
| [ 0.439090] pci 0000:00:1c.2: bridge window [mem 0xe1400000-0xe1bfffff 64bit pref] |
| [ 0.439168] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] |
| [ 0.439228] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] |
| [ 0.439286] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] |
| [ 0.439346] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] |
| [ 0.439405] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window] |
| [ 0.439465] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window] |
| [ 0.439525] pci_bus 0000:00: resource 10 [mem 0x000d4000-0x000d7fff window] |
| [ 0.439584] pci_bus 0000:00: resource 11 [mem 0x000d8000-0x000dbfff window] |
| [ 0.439644] pci_bus 0000:00: resource 12 [mem 0x000dc000-0x000dffff window] |
| [ 0.439704] pci_bus 0000:00: resource 13 [mem 0x000e0000-0x000e3fff window] |
| [ 0.439763] pci_bus 0000:00: resource 14 [mem 0x000e4000-0x000e7fff window] |
| [ 0.439822] pci_bus 0000:00: resource 15 [mem 0x000e8000-0x000ebfff window] |
| [ 0.439882] pci_bus 0000:00: resource 16 [mem 0x000ec000-0x000effff window] |
| [ 0.439941] pci_bus 0000:00: resource 17 [mem 0x000f0000-0x000fffff window] |
| [ 0.440001] pci_bus 0000:00: resource 18 [mem 0x82a00000-0xefffffff window] |
| [ 0.440061] pci_bus 0000:00: resource 19 [mem 0xfed40000-0xfed44fff window] |
| [ 0.440120] pci_bus 0000:01: resource 1 [mem 0xe2800000-0xe2afffff] |
| [ 0.440177] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] |
| [ 0.440233] pci_bus 0000:02: resource 1 [mem 0xe0000000-0xe08fffff] |
| [ 0.440292] pci_bus 0000:02: resource 2 [mem 0xe0c00000-0xe13fffff 64bit pref] |
| [ 0.440361] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff] |
| [ 0.440422] pci_bus 0000:03: resource 1 [mem 0xe1c00000-0xe23fffff] |
| [ 0.440481] pci_bus 0000:03: resource 2 [mem 0xe1400000-0xe1bfffff 64bit pref] |
| [ 0.440614] NET: Registered protocol family 2 |
| [ 0.440807] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear) |
| [ 0.440897] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) |
| [ 0.441112] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) |
| [ 0.441282] TCP: Hash tables configured (established 131072 bind 65536) |
| [ 0.441364] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear) |
| [ 0.441451] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear) |
| [ 0.441580] NET: Registered protocol family 1 |
| [ 0.441641] NET: Registered protocol family 44 |
| [ 0.441705] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] |
| [ 0.442548] PCI: CLS 64 bytes, default 64 |
| [ 0.442643] Trying to unpack rootfs image as initramfs... |
| [ 1.185216] Freeing initrd memory: 58592K |
| [ 1.185353] DMAR: No ATSR found |
| [ 1.185436] DMAR: dmar0: Using Queued invalidation |
| [ 1.185497] DMAR: dmar1: Using Queued invalidation |
| [ 1.254491] pci 0000:00:00.0: Adding to iommu group 0 |
| [ 1.257409] pci 0000:00:02.0: Adding to iommu group 1 |
| [ 1.257722] pci 0000:00:02.0: Using iommu direct mapping |
| [ 1.257807] pci 0000:00:04.0: Adding to iommu group 2 |
| [ 1.257898] pci 0000:00:14.0: Adding to iommu group 3 |
| [ 1.257985] pci 0000:00:19.0: Adding to iommu group 4 |
| [ 1.258075] pci 0000:00:1a.0: Adding to iommu group 5 |
| [ 1.258163] pci 0000:00:1b.0: Adding to iommu group 6 |
| [ 1.258256] pci 0000:00:1c.0: Adding to iommu group 7 |
| [ 1.258347] pci 0000:00:1c.1: Adding to iommu group 8 |
| [ 1.258439] pci 0000:00:1c.2: Adding to iommu group 9 |
| [ 1.258533] pci 0000:00:1d.0: Adding to iommu group 10 |
| [ 1.258631] pci 0000:00:1f.0: Adding to iommu group 11 |
| [ 1.258698] pci 0000:00:1f.2: Adding to iommu group 11 |
| [ 1.258764] pci 0000:00:1f.3: Adding to iommu group 11 |
| [ 1.258829] pci 0000:00:1f.6: Adding to iommu group 11 |
| [ 1.258922] pci 0000:01:00.0: Adding to iommu group 12 |
| [ 1.259011] pci 0000:02:00.0: Adding to iommu group 13 |
| [ 1.259072] DMAR: Intel(R) Virtualization Technology for Directed I/O |
| [ 1.260923] Initialise system trusted keyrings |
| [ 1.260988] Key type blacklist registered |
| [ 1.261082] workingset: timestamp_bits=40 max_order=22 bucket_order=0 |
| [ 1.262148] zbud: loaded |
| [ 1.262392] Platform Keyring initialized |
| [ 1.262450] Key type asymmetric registered |
| [ 1.262508] Asymmetric key parser 'x509' registered |
| [ 1.262570] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) |
| [ 1.262670] io scheduler mq-deadline registered |
| [ 1.262971] pcieport 0000:00:1c.0: PME: Signaling with IRQ 26 |
| [ 1.263238] pcieport 0000:00:1c.1: PME: Signaling with IRQ 27 |
| [ 1.263322] pcieport 0000:00:1c.1: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+ |
| [ 1.263646] pcieport 0000:00:1c.2: PME: Signaling with IRQ 28 |
| [ 1.263731] pcieport 0000:00:1c.2: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+ |
| [ 1.263927] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 |
| [ 1.263998] intel_idle: MWAIT substates: 0x21120 |
| [ 1.263999] intel_idle: v0.4.1 model 0x3A |
| [ 1.264140] intel_idle: lapic_timer_reliable_states 0xffffffff |
| [ 1.265670] thermal LNXTHERM:00: registered as thermal_zone0 |
| [ 1.265731] ACPI: Thermal Zone [THM0] (53 C) |
| [ 1.266832] thermal LNXTHERM:01: registered as thermal_zone1 |
| [ 1.266893] ACPI: Thermal Zone [THM1] (27 C) |
| [ 1.267028] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
| [ 1.267439] Linux agpgart interface v0.103 |
| [ 1.267537] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de> |
| [ 1.267596] AMD-Vi: AMD IOMMUv2 functionality not available on this system |
| [ 1.267835] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 |
| [ 1.269583] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| [ 1.269644] serio: i8042 AUX port at 0x60,0x64 irq 12 |
| [ 1.269778] mousedev: PS/2 mouse device common for all mice |
| [ 1.269870] rtc_cmos 00:03: RTC can wake from S4 |
| [ 1.270083] rtc_cmos 00:03: registered as rtc0 |
| [ 1.270154] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs |
| [ 1.270238] intel_pstate: Intel P-state driver initializing |
| [ 1.270479] ledtrig-cpu: registered to indicate activity on CPUs |
| [ 1.270706] drop_monitor: Initializing network drop monitor service |
| [ 1.271133] NET: Registered protocol family 10 |
| [ 1.271271] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 |
| [ 1.290077] Segment Routing with IPv6 |
| [ 1.290201] mip6: Mobile IPv6 |
| [ 1.290268] NET: Registered protocol family 17 |
| [ 1.290412] mpls_gso: MPLS GSO support |
| [ 1.290824] microcode: sig=0x306a9, pf=0x10, revision=0x21 |
| [ 1.290913] microcode: Microcode Update Driver: v2.2. |
| [ 1.290918] IPI shorthand broadcast: enabled |
| [ 1.291076] sched_clock: Marking stable (1283292023, 7454206)->(1298031055, -7284826) |
| [ 1.291362] registered taskstats version 1 |
| [ 1.291429] Loading compiled-in X.509 certificates |
| [ 1.329754] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' |
| [ 1.329862] Loaded X.509 cert 'Debian Secure Boot Signer: 00a7468def' |
| [ 1.329960] zswap: loaded using pool lzo/zbud |
| [ 1.330211] Key type ._fscrypt registered |
| [ 1.330266] Key type .fscrypt registered |
| [ 1.330330] AppArmor: AppArmor sha1 policy hashing enabled |
| [ 1.330714] rtc_cmos 00:03: setting system clock to 2020-01-01T01:49:06 UTC (1577843346) |
| [ 1.332584] Freeing unused kernel image memory: 1668K |
| [ 1.356451] Write protecting the kernel read-only data: 16384k |
| [ 1.357476] Freeing unused kernel image memory: 2036K |
| [ 1.357837] Freeing unused kernel image memory: 364K |
| [ 1.369406] x86/mm: Checked W+X mappings: passed, no W+X pages found. |
| [ 1.369465] x86/mm: Checking user space page tables |
| [ 1.376898] x86/mm: Checked W+X mappings: passed, no W+X pages found. |
| [ 1.376956] Run /init as init process |
| [ 1.491005] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2a/PNP0C09:00/PNP0C0E:00/input/input2 |
| [ 1.491129] ACPI: Sleep Button [SLPB] |
| [ 1.491244] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2a/PNP0C09:00/PNP0C0D:00/input/input3 |
| [ 1.491769] ACPI: Lid Switch [LID] |
| [ 1.491890] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 |
| [ 1.492001] ACPI: Power Button [PWRF] |
| [ 1.509424] battery: ACPI: Battery Slot [BAT0] (battery present) |
| [ 1.509658] battery: ACPI: Battery Slot [BAT1] (battery absent) |
| [ 1.514927] pps_core: LinuxPPS API ver. 1 registered |
| [ 1.514987] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> |
| [ 1.516377] PTP clock support registered |
| [ 1.530643] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k |
| [ 1.531866] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. |
| [ 1.532091] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode |
| [ 1.535535] SCSI subsystem initialized |
| [ 1.538118] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20190816/utaddress-204) |
| [ 1.538212] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 1.538286] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20190816/utaddress-204) |
| [ 1.538375] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 1.538449] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20190816/utaddress-204) |
| [ 1.538541] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 1.538614] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20190816/utaddress-204) |
| [ 1.538704] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 1.538777] lpc_ich: Resource conflict(s) found affecting gpio_ich |
| [ 1.542493] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt |
| [ 1.543794] ACPI: bus type USB registered |
| [ 1.543869] usbcore: registered new interface driver usbfs |
| [ 1.545776] sdhci: Secure Digital Host Controller Interface driver |
| [ 1.545838] sdhci: Copyright(c) Pierre Ossman |
| [ 1.546445] usbcore: registered new interface driver hub |
| [ 1.547105] usbcore: registered new device driver usb |
| [ 1.551679] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| [ 1.552551] ehci-pci: EHCI PCI platform driver |
| [ 1.552725] ehci-pci 0000:00:1a.0: EHCI Host Controller |
| [ 1.552786] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 |
| [ 1.552865] ehci-pci 0000:00:1a.0: debug port 2 |
| [ 1.556828] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported |
| [ 1.556952] ehci-pci 0000:00:1a.0: irq 19, io mem 0xe2b3f000 |
| [ 1.562804] sdhci-pci 0000:02:00.0: SDHCI controller found [1180:e822] (rev 7) |
| [ 1.563487] sdhci-pci 0000:02:00.0: Will use DMA mode even though HW doesn't fully claim to support it. |
| [ 1.563755] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes |
| [ 1.566095] libata version 3.00 loaded. |
| [ 1.566427] cryptd: max_cpu_qlen set to 1000 |
| [ 1.570907] ahci 0000:00:1f.2: version 3.0 |
| [ 1.571074] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled |
| [ 1.577835] AVX version of gcm_enc/dec engaged. |
| [ 1.577895] AES CTR mode by8 optimization enabled |
| [ 1.578076] mmc0: SDHCI controller on PCI [0000:02:00.0] using DMA |
| [ 1.581666] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 |
| [ 1.581782] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 |
| [ 1.581852] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.581922] usb usb1: Product: EHCI Host Controller |
| [ 1.581979] usb usb1: Manufacturer: Linux 5.4.0-1-amd64 ehci_hcd |
| [ 1.582038] usb usb1: SerialNumber: 0000:00:1a.0 |
| [ 1.582220] hub 1-0:1.0: USB hub found |
| [ 1.582284] hub 1-0:1.0: 3 ports detected |
| [ 1.582652] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x17 impl SATA mode |
| [ 1.582727] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst |
| [ 1.583438] scsi host0: ahci |
| [ 1.583611] scsi host1: ahci |
| [ 1.583746] scsi host2: ahci |
| [ 1.583883] scsi host3: ahci |
| [ 1.584020] scsi host4: ahci |
| [ 1.584126] xhci_hcd 0000:00:14.0: xHCI Host Controller |
| [ 1.584193] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 |
| [ 1.585822] xhci_hcd 0000:00:14.0: hcc params 0x200071a1 hci version 0x100 quirks 0x000000000000b930 |
| [ 1.585900] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported |
| [ 1.586526] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 |
| [ 1.586598] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.586667] usb usb2: Product: xHCI Host Controller |
| [ 1.586725] usb usb2: Manufacturer: Linux 5.4.0-1-amd64 xhci-hcd |
| [ 1.586785] usb usb2: SerialNumber: 0000:00:14.0 |
| [ 1.587582] hub 2-0:1.0: USB hub found |
| [ 1.587892] hub 2-0:1.0: 4 ports detected |
| [ 1.588136] xhci_hcd 0000:00:14.0: xHCI Host Controller |
| [ 1.588147] ehci-pci 0000:00:1d.0: EHCI Host Controller |
| [ 1.588198] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 |
| [ 1.588258] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4 |
| [ 1.588325] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed |
| [ 1.588411] ehci-pci 0000:00:1d.0: debug port 2 |
| [ 1.588514] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04 |
| [ 1.588634] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.588749] usb usb3: Product: xHCI Host Controller |
| [ 1.588837] usb usb3: Manufacturer: Linux 5.4.0-1-amd64 xhci-hcd |
| [ 1.588929] usb usb3: SerialNumber: 0000:00:14.0 |
| [ 1.589109] hub 3-0:1.0: USB hub found |
| [ 1.589199] hub 3-0:1.0: 4 ports detected |
| [ 1.591110] scsi host5: ahci |
| [ 1.591242] ata1: SATA max UDMA/133 abar m2048@0xe2b3e000 port 0xe2b3e100 irq 30 |
| [ 1.591343] ata2: SATA max UDMA/133 abar m2048@0xe2b3e000 port 0xe2b3e180 irq 30 |
| [ 1.591443] ata3: SATA max UDMA/133 abar m2048@0xe2b3e000 port 0xe2b3e200 irq 30 |
| [ 1.591539] ata4: DUMMY |
| [ 1.591609] ata5: SATA max UDMA/133 abar m2048@0xe2b3e000 port 0xe2b3e300 irq 30 |
| [ 1.591708] ata6: DUMMY |
| [ 1.592442] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported |
| [ 1.592512] ehci-pci 0000:00:1d.0: irq 18, io mem 0xe2b40000 |
| [ 1.608533] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 |
| [ 1.608869] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 |
| [ 1.608943] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.609016] usb usb4: Product: EHCI Host Controller |
| [ 1.609074] usb usb4: Manufacturer: Linux 5.4.0-1-amd64 ehci_hcd |
| [ 1.609136] usb usb4: SerialNumber: 0000:00:1d.0 |
| [ 1.609665] hub 4-0:1.0: USB hub found |
| [ 1.609744] hub 4-0:1.0: 3 ports detected |
| [ 1.648055] i915 0000:00:02.0: VT-d active for gfx access |
| [ 1.648123] i915 0000:00:02.0: vgaarb: deactivate vga console |
| [ 1.649516] Console: switching to colour dummy device 80x25 |
| [ 1.649581] i915 0000:00:02.0: DMAR active, disabling use of stolen memory |
| [ 1.653587] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock |
| [ 1.700959] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). |
| [ 1.700974] [drm] Driver supports precise vblank timestamp query. |
| [ 1.701334] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem |
| [ 1.749818] [drm] Initialized i915 1.6.0 20190822 for 0000:00:02.0 on minor 0 |
| [ 1.749973] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) |
| [ 1.751632] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 3c:97:0e:46:56:66 |
| [ 1.751636] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection |
| [ 1.751675] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF |
| [ 1.752773] e1000e 0000:00:19.0 eno0: renamed from eth0 |
| [ 1.777579] acpi device:0d: registered as cooling_device5 |
| [ 1.777677] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6 |
| [ 1.906886] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [ 1.907980] ata1.00: ATA-9: KINGSTON SKC400S37512G, SAFM001B, max UDMA/133 |
| [ 1.907989] ata1.00: 1000215216 sectors, multi 0: LBA48 NCQ (depth 32), AA |
| [ 1.908439] ata1.00: configured for UDMA/133 |
| [ 1.908747] scsi 0:0:0:0: Direct-Access ATA KINGSTON SKC400S 001B PQ: 0 ANSI: 5 |
| [ 1.916481] usb 1-1: new high-speed USB device number 2 using ehci-pci |
| [ 1.928451] usb 2-3: new high-speed USB device number 2 using xhci_hcd |
| [ 1.944463] usb 4-1: new high-speed USB device number 2 using ehci-pci |
| [ 2.077241] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 |
| [ 2.077247] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 2.077441] hub 1-1:1.0: USB hub found |
| [ 2.078025] hub 1-1:1.0: 6 ports detected |
| [ 2.078974] usb 2-3: New USB device found, idVendor=2109, idProduct=2813, bcdDevice= 2.21 |
| [ 2.078978] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 2.078980] usb 2-3: Product: USB2.0 Hub |
| [ 2.078982] usb 2-3: Manufacturer: VIA Labs, Inc. |
| [ 2.079045] fbcon: i915drmfb (fb0) is primary device |
| [ 2.080003] hub 2-3:1.0: USB hub found |
| [ 2.080155] hub 2-3:1.0: 4 ports detected |
| [ 2.105839] usb 4-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 |
| [ 2.105843] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 2.106365] hub 4-1:1.0: USB hub found |
| [ 2.106725] hub 4-1:1.0: 8 ports detected |
| [ 2.223423] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [ 2.260901] ata2.00: ATA-10: ST2000LM015-2E8174, SDM1, max UDMA/133 |
| [ 2.260905] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA |
| [ 2.265435] usb 3-3: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd |
| [ 2.292487] tsc: Refined TSC clocksource calibration: 2893.423 MHz |
| [ 2.292504] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29b4fe3de5f, max_idle_ns: 440795305241 ns |
| [ 2.292541] clocksource: Switched to clocksource tsc |
| [ 2.310841] ata2.00: configured for UDMA/133 |
| [ 2.314395] psmouse serio1: synaptics: queried max coordinates: x [..5470], y [..4498] |
| [ 2.320316] scsi 1:0:0:0: Direct-Access ATA ST2000LM015-2E81 SDM1 PQ: 0 ANSI: 5 |
| [ 2.364464] usb 1-1.3: new full-speed USB device number 3 using ehci-pci |
| [ 2.376504] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b1/0xb40000/0xa0000/0x0, board id: 0, fw id: 920262 |
| [ 2.376515] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0 |
| [ 2.396470] usb 4-1.5: new high-speed USB device number 3 using ehci-pci |
| [ 2.410100] usb 3-3: New USB device found, idVendor=2109, idProduct=0813, bcdDevice= 2.21 |
| [ 2.410105] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 2.410108] usb 3-3: Product: USB3.0 Hub |
| [ 2.410111] usb 3-3: Manufacturer: VIA Labs, Inc. |
| [ 2.413166] hub 3-3:1.0: USB hub found |
| [ 2.413400] hub 3-3:1.0: 4 ports detected |
| [ 2.415597] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5 |
| [ 2.474248] usb 1-1.3: New USB device found, idVendor=147e, idProduct=2020, bcdDevice= 0.01 |
| [ 2.474253] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 2.474256] usb 1-1.3: Product: Biometric Coprocessor |
| [ 2.474259] usb 1-1.3: Manufacturer: Auth |
| [ 2.513461] usb 4-1.5: New USB device found, idVendor=17ef, idProduct=100a, bcdDevice= 0.00 |
| [ 2.513466] usb 4-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 2.514213] hub 4-1.5:1.0: USB hub found |
| [ 2.514369] hub 4-1.5:1.0: 6 ports detected |
| [ 2.552505] usb 1-1.4: new full-speed USB device number 4 using ehci-pci |
| [ 2.635408] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) |
| [ 2.635794] ata3.00: supports DRM functions and may not be fully accessible |
| [ 2.635938] ata3.00: ATA-11: KINGSTON SUV500MS240G, 003056RI, max UDMA/133 |
| [ 2.635940] ata3.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 32), AA |
| [ 2.636723] ata3.00: Trusted Computing capability qword not valid! |
| [ 2.637244] ata3.00: supports DRM functions and may not be fully accessible |
| [ 2.638189] ata3.00: Trusted Computing capability qword not valid! |
| [ 2.638194] ata3.00: configured for UDMA/133 |
| [ 2.638557] scsi 2:0:0:0: Direct-Access ATA KINGSTON SUV500M 56RI PQ: 0 ANSI: 5 |
| [ 2.663760] usb 1-1.4: config 1 interface 1 altsetting 0 endpoint 0x83 has wMaxPacketSize 0, skipping |
| [ 2.663764] usb 1-1.4: config 1 interface 1 altsetting 0 endpoint 0x3 has wMaxPacketSize 0, skipping |
| [ 2.665243] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=21e6, bcdDevice= 1.12 |
| [ 2.665248] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [ 2.665250] usb 1-1.4: Product: BCM20702A0 |
| [ 2.665253] usb 1-1.4: Manufacturer: Broadcom Corp |
| [ 2.665256] usb 1-1.4: SerialNumber: B8763FA9D32E |
| [ 2.748499] usb 1-1.6: new high-speed USB device number 5 using ehci-pci |
| [ 2.804502] usb 4-1.5.1: new full-speed USB device number 4 using ehci-pci |
| [ 2.851622] Console: switching to colour frame buffer device 240x67 |
| [ 2.864849] usb 1-1.6: New USB device found, idVendor=5986, idProduct=02d5, bcdDevice=10.11 |
| [ 2.864853] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 2.864857] usb 1-1.6: Product: Integrated Camera |
| [ 2.864860] usb 1-1.6: Manufacturer: Ricoh Company Ltd. |
| [ 2.908083] i915 0000:00:02.0: fb0: i915drmfb frame buffer device |
| [ 2.919675] usb 4-1.5.1: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=24.10 |
| [ 2.922399] usb 4-1.5.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 2.925090] usb 4-1.5.1: Product: USB Receiver |
| [ 2.926554] usb 4-1.5.1: Manufacturer: Logitech |
| [ 2.939531] hidraw: raw HID events driver (C) Jiri Kosina |
| [ 2.949364] ata5: SATA link down (SStatus 0 SControl 300) |
| [ 2.956597] usbcore: registered new interface driver usbhid |
| [ 2.958704] usbhid: USB HID core driver |
| [ 2.963183] sd 2:0:0:0: [sdc] 468862128 512-byte logical blocks: (240 GB/224 GiB) |
| [ 2.963312] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) |
| [ 2.965010] sd 2:0:0:0: [sdc] 4096-byte physical blocks |
| [ 2.967687] sd 0:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/477 GiB) |
| [ 2.968829] sd 1:0:0:0: [sdb] 4096-byte physical blocks |
| [ 2.970711] sd 0:0:0:0: [sda] Write Protect is off |
| [ 2.972684] sd 1:0:0:0: [sdb] Write Protect is off |
| [ 2.974536] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 |
| [ 2.974724] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.1/4-1.5.1:1.0/0003:046D:C52B.0001/input/input8 |
| [ 2.975084] sd 2:0:0:0: [sdc] Write Protect is off |
| [ 2.975086] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 |
| [ 2.975760] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 2.976229] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 |
| [ 2.976401] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 2.977905] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 2.997434] sdc: sdc1 sdc2 sdc3 |
| [ 2.999603] sd 2:0:0:0: [sdc] Attached SCSI disk |
| [ 3.008146] sdb: sdb1 |
| [ 3.011088] sd 1:0:0:0: [sdb] Attached SCSI disk |
| [ 3.012022] sda: sda1 sda2 < sda5 > |
| [ 3.016578] sd 0:0:0:0: [sda] Attached SCSI disk |
| [ 3.020431] usb 4-1.5.3: new high-speed USB device number 5 using ehci-pci |
| [ 3.036571] hid-generic 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1.5.1/input0 |
| [ 3.038300] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.1/4-1.5.1:1.1/0003:046D:C52B.0002/input/input9 |
| [ 3.039881] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.1/4-1.5.1:1.1/0003:046D:C52B.0002/input/input10 |
| [ 3.063918] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 |
| [ 3.100660] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.1/4-1.5.1:1.1/0003:046D:C52B.0002/input/input11 |
| [ 3.104335] hid-generic 0003:046D:C52B.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.5.1/input1 |
| [ 3.107953] hid-generic 0003:046D:C52B.0003: hiddev1,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.5.1/input2 |
| [ 3.137121] usb 4-1.5.3: New USB device found, idVendor=0409, idProduct=005a, bcdDevice= 1.00 |
| [ 3.138591] usb 4-1.5.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 3.140213] hub 4-1.5.3:1.0: USB hub found |
| [ 3.142062] hub 4-1.5.3:1.0: 3 ports detected |
| [ 3.224421] usb 4-1.5.6: new high-speed USB device number 6 using ehci-pci |
| [ 3.240981] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.5.1/input2 |
| [ 3.259677] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input7 |
| [ 3.333148] usb 4-1.5.6: New USB device found, idVendor=0409, idProduct=005a, bcdDevice= 1.00 |
| [ 3.334625] usb 4-1.5.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 3.336436] hub 4-1.5.6:1.0: USB hub found |
| [ 3.338080] hub 4-1.5.6:1.0: 4 ports detected |
| [ 3.363829] input: Logitech Unifying Device. Wireless PID:1028 Mouse as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.1/4-1.5.1:1.2/0003:046D:C52B.0003/0003:046D:1028.0004/input/input13 |
| [ 3.367427] hid-generic 0003:046D:1028.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1028] on usb-0000:00:1d.0-1.5.1/input2:1 |
| [ 3.436429] usb 4-1.5.3.3: new full-speed USB device number 7 using ehci-pci |
| [ 3.442512] input: Logitech M570 as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.1/4-1.5.1:1.2/0003:046D:C52B.0003/0003:046D:1028.0004/input/input17 |
| [ 3.444406] logitech-hidpp-device 0003:046D:1028.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech M570] on usb-0000:00:1d.0-1.5.1/input2:1 |
| [ 3.560422] raid6: sse2x4 gen() 12097 MB/s |
| [ 3.628418] raid6: sse2x4 xor() 10479 MB/s |
| [ 3.696417] raid6: sse2x2 gen() 13025 MB/s |
| [ 3.764420] raid6: sse2x2 xor() 8834 MB/s |
| [ 3.832418] raid6: sse2x1 gen() 10954 MB/s |
| [ 3.900418] raid6: sse2x1 xor() 7645 MB/s |
| [ 3.901866] raid6: using algorithm sse2x2 gen() 13025 MB/s |
| [ 3.903312] raid6: .... xor() 8834 MB/s, rmw enabled |
| [ 3.904781] raid6: using ssse3x2 recovery algorithm |
| [ 3.906233] usb 4-1.5.3.3: device descriptor read/64, error -32 |
| [ 3.908754] xor: automatically using best checksumming function avx |
| [ 3.911856] async_tx: api initialized (async) |
| [ 4.085029] device-mapper: uevent: version 1.0.3 |
| [ 4.086885] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com |
| [ 4.171796] usb 4-1.5.3.3: New USB device found, idVendor=056d, idProduct=0002, bcdDevice=75.30 |
| [ 4.175549] usb 4-1.5.3.3: New USB device strings: Mfr=4, Product=14, SerialNumber=0 |
| [ 4.179290] usb 4-1.5.3.3: Product: EIZO USB HID Monitor |
| [ 4.183022] usb 4-1.5.3.3: Manufacturer: EIZO |
| [ 4.212521] usb 4-1.5.2: new full-speed USB device number 8 using ehci-pci |
| [ 4.329277] usb 4-1.5.2: New USB device found, idVendor=04b4, idProduct=4042, bcdDevice= 1.03 |
| [ 4.333048] usb 4-1.5.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 4.342423] input: HID 04b4:4042 as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.2/4-1.5.2:1.0/0003:04B4:4042.0005/input/input18 |
| [ 4.401009] hid-generic 0003:04B4:4042.0005: input,hidraw2: USB HID v1.11 Keyboard [HID 04b4:4042] on usb-0000:00:1d.0-1.5.2/input0 |
| [ 4.405648] usb 4-1.5.6.1: new high-speed USB device number 9 using ehci-pci |
| [ 4.414467] input: HID 04b4:4042 Mouse as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.2/4-1.5.2:1.1/0003:04B4:4042.0006/input/input19 |
| [ 4.416241] input: HID 04b4:4042 System Control as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.2/4-1.5.2:1.1/0003:04B4:4042.0006/input/input20 |
| [ 4.476661] input: HID 04b4:4042 Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.2/4-1.5.2:1.1/0003:04B4:4042.0006/input/input21 |
| [ 4.480873] input: HID 04b4:4042 as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.2/4-1.5.2:1.1/0003:04B4:4042.0006/input/input22 |
| [ 4.485053] input: HID 04b4:4042 Keyboard as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.2/4-1.5.2:1.1/0003:04B4:4042.0006/input/input23 |
| [ 4.491189] hid-generic 0003:056D:0002.0007: hiddev1,hidraw3: USB HID v1.10 Device [EIZO EIZO USB HID Monitor] on usb-0000:00:1d.0-1.5.3.3/input0 |
| [ 4.492975] hid-generic 0003:04B4:4042.0006: input,hiddev2,hidraw4: USB HID v1.11 Mouse [HID 04b4:4042] on usb-0000:00:1d.0-1.5.2/input1 |
| [ 4.517322] usb 4-1.5.6.1: New USB device found, idVendor=0409, idProduct=005a, bcdDevice= 1.00 |
| [ 4.521229] usb 4-1.5.6.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 4.525786] hub 4-1.5.6.1:1.0: USB hub found |
| [ 4.528210] hub 4-1.5.6.1:1.0: 4 ports detected |
| [ 4.816511] usb 4-1.5.6.1.2: new full-speed USB device number 10 using ehci-pci |
| [ 4.935267] usb 4-1.5.6.1.2: New USB device found, idVendor=067b, idProduct=2305, bcdDevice= 2.02 |
| [ 4.939442] usb 4-1.5.6.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 4.941838] usb 4-1.5.6.1.2: Product: IEEE-1284 Controller |
| [ 4.944182] usb 4-1.5.6.1.2: Manufacturer: Prolific Technology Inc. |
| [ 5.044530] usb 4-1.5.6.1.3: new full-speed USB device number 11 using ehci-pci |
| [ 5.158267] usb 4-1.5.6.1.3: New USB device found, idVendor=067b, idProduct=2303, bcdDevice= 4.00 |
| [ 5.162186] usb 4-1.5.6.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 5.166031] usb 4-1.5.6.1.3: Product: USB-Serial Controller D |
| [ 5.169808] usb 4-1.5.6.1.3: Manufacturer: Prolific Technology Inc. |
| [ 12.711993] PM: Image not found (code -22) |
| [ 12.716917] PM: Marking nosave pages: [mem 0x00000000-0x00000fff] |
| [ 12.716919] PM: Marking nosave pages: [mem 0x0009f000-0x000fffff] |
| [ 12.716923] PM: Marking nosave pages: [mem 0x7ff28000-0xffffffff] |
| [ 12.718900] PM: Basic memory bitmaps created |
| [ 12.719821] PM: Basic memory bitmaps freed |
| [ 12.720686] video LNXVIDEO:00: Restoring backlight state |
| [ 12.837015] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) |
| [ 12.909705] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. |
| [ 13.093171] systemd[1]: Inserted module 'autofs4' |
| [ 13.118454] systemd[1]: systemd 244-3 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) |
| [ 13.144593] systemd[1]: Detected architecture x86-64. |
| [ 13.170816] systemd[1]: Set hostname to <TP-T430s>. |
| [ 13.292536] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly. |
| [ 13.332202] systemd[1]: /lib/systemd/system/thinkfan.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/thinkfan.pid → /run/thinkfan.pid; please update the unit file accordingly. |
| [ 13.336073] systemd[1]: /etc/systemd/system/teamviewerd.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/teamviewerd.pid → /run/teamviewerd.pid; please update the unit file accordingly. |
| [ 13.359792] systemd[1]: /lib/systemd/system/fancontrol.service:10: PIDFile= references a path below legacy directory /var/run/, updating /var/run/fancontrol.pid → /run/fancontrol.pid; please update the unit file accordingly. |
| [ 13.363369] systemd[1]: /lib/systemd/system/docker.socket:6: ListenStream= references a path below legacy directory /var/run/, updating /var/run/docker.sock → /run/docker.sock; please update the unit file accordingly. |
| [ 13.372968] systemd[1]: /etc/systemd/system/anydesk.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/anydesk.pid → /run/anydesk.pid; please update the unit file accordingly. |
| [ 13.399257] systemd[1]: /lib/systemd/system/pcscd.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/pcscd/pcscd.comm → /run/pcscd/pcscd.comm; please update the unit file accordingly. |
| [ 13.409457] systemd[1]: Created slice system-getty.slice. |
| [ 13.411763] systemd[1]: Created slice system-systemd\x2dcryptsetup.slice. |
| [ 13.420034] systemd[1]: Created slice system-systemd\x2dfsck.slice. |
| [ 13.427760] systemd[1]: Created slice system-tor.slice. |
| [ 13.433612] systemd[1]: Created slice User and Session Slice. |
| [ 13.437517] systemd[1]: Started Forward Password Requests to Wall Directory Watch. |
| [ 13.441792] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. |
| [ 13.445790] systemd[1]: Reached target User and Group Name Lookups. |
| [ 13.449845] systemd[1]: Reached target Remote File Systems. |
| [ 13.452399] systemd[1]: Reached target Slices. |
| [ 13.456621] systemd[1]: Listening on Device-mapper event daemon FIFOs. |
| [ 13.463975] systemd[1]: Listening on LVM2 poll daemon socket. |
| [ 13.468165] systemd[1]: Listening on Syslog Socket. |
| [ 13.471704] systemd[1]: Listening on fsck to fsckd communication Socket. |
| [ 13.475474] systemd[1]: Listening on initctl Compatibility Named Pipe. |
| [ 13.479428] systemd[1]: Listening on Journal Audit Socket. |
| [ 13.483211] systemd[1]: Listening on Journal Socket (/dev/log). |
| [ 13.487048] systemd[1]: Listening on Journal Socket. |
| [ 13.490841] systemd[1]: Listening on udev Control Socket. |
| [ 13.494587] systemd[1]: Listening on udev Kernel Socket. |
| [ 13.499137] systemd[1]: Mounting Huge Pages File System... |
| [ 13.503065] systemd[1]: Mounting POSIX Message Queue File System... |
| [ 13.507021] systemd[1]: Mounting Kernel Debug File System... |
| [ 13.510897] systemd[1]: Starting Availability of block devices... |
| [ 13.514868] systemd[1]: Starting Set the console keyboard layout... |
| [ 13.518754] systemd[1]: Starting Create list of static device nodes for the current kernel... |
| [ 13.523255] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... |
| [ 13.527072] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. |
| [ 13.527119] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. |
| [ 13.528835] systemd[1]: Starting Journal Service... |
| [ 13.536108] systemd[1]: Starting Load Kernel Modules... |
| [ 13.540722] systemd[1]: Starting Remount Root and Kernel File Systems... |
| [ 13.546368] systemd[1]: Starting udev Coldplug all Devices... |
| [ 13.551553] systemd[1]: Mounted Huge Pages File System. |
| [ 13.554663] systemd[1]: Mounted POSIX Message Queue File System. |
| [ 13.557182] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro |
| [ 13.561661] systemd[1]: Mounted Kernel Debug File System. |
| [ 13.564507] systemd[1]: Started Availability of block devices. |
| [ 13.567718] systemd[1]: Started Set the console keyboard layout. |
| [ 13.572720] systemd[1]: Started Create list of static device nodes for the current kernel. |
| [ 13.578222] systemd[1]: Started Remount Root and Kernel File Systems. |
| [ 13.582661] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. |
| [ 13.583763] systemd[1]: Starting Load/Save Random Seed... |
| [ 13.588117] systemd[1]: Starting Create System Users... |
| [ 13.592647] systemd[1]: Started Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling. |
| [ 13.615139] systemd[1]: Started Load/Save Random Seed. |
| [ 13.627883] systemd[1]: Started Create System Users. |
| [ 13.631692] systemd[1]: Starting Create Static Device Nodes in /dev... |
| [ 13.660179] systemd[1]: Started Create Static Device Nodes in /dev. |
| [ 13.662346] systemd[1]: Started udev Coldplug all Devices. |
| [ 13.666039] systemd[1]: Reached target Local File Systems (Pre). |
| [ 13.675226] systemd[1]: Mounting Mount unit for core18, revision 1279... |
| [ 13.680016] systemd[1]: Mounting Mount unit for core18, revision 1288... |
| [ 13.683920] systemd[1]: Mounting Mount unit for sdlpop, revision 211... |
| [ 13.687099] systemd[1]: Mounting Mount unit for snapd, revision 5643... |
| [ 13.693124] systemd[1]: Mounting Mount unit for snapd, revision 5754... |
| [ 13.696865] systemd[1]: Starting Helper to synchronize boot up for ifupdown... |
| [ 13.701015] systemd[1]: Starting udev Kernel Device Manager... |
| [ 13.706376] systemd[1]: Started Helper to synchronize boot up for ifupdown. |
| [ 13.748633] loop: module loaded |
| [ 13.762929] lp: driver loaded but no devices found |
| [ 13.768181] ppdev: user-space parallel port driver |
| [ 13.776114] squashfs: version 4.0 (2009/01/31) Phillip Lougher |
| [ 13.779501] systemd[1]: Started Load Kernel Modules. |
| [ 13.781937] systemd[1]: Condition check resulted in FUSE Control File System being skipped. |
| [ 13.782032] systemd[1]: Condition check resulted in Kernel Configuration File System being skipped. |
| [ 13.783104] systemd[1]: Starting Apply Kernel Variables... |
| [ 13.802392] systemd[1]: Started Apply Kernel Variables. |
| [ 13.808892] systemd[1]: Mounted Mount unit for core18, revision 1288. |
| [ 13.849123] systemd[1]: Mounted Mount unit for core18, revision 1279. |
| [ 13.851899] systemd[1]: Mounted Mount unit for snapd, revision 5643. |
| [ 13.859514] systemd[1]: Started udev Kernel Device Manager. |
| [ 13.865845] systemd[1]: Starting Show Plymouth Boot Screen... |
| [ 13.877165] systemd[1]: Mounted Mount unit for snapd, revision 5754. |
| [ 13.883448] systemd[1]: Mounted Mount unit for sdlpop, revision 211. |
| [ 13.891598] systemd[1]: plymouth-start.service: Succeeded. |
| [ 13.894136] systemd[1]: Started Show Plymouth Boot Screen. |
| [ 13.898328] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch being skipped. |
| [ 13.900563] systemd[1]: Started Forward Password Requests to Plymouth Directory Watch. |
| [ 13.983985] systemd[1]: Started Journal Service. |
| [ 13.997203] systemd-journald[499]: Received client request to flush runtime journal. |
| [ 14.074009] ACPI: AC Adapter [AC] (on-line) |
| [ 14.124468] tpm_tis 00:06: 1.2 TPM (device-id 0x0, rev-id 78) |
| [ 14.162210] sd 0:0:0:0: Attached scsi generic sg0 type 0 |
| [ 14.162242] iTCO_vendor_support: vendor-support=0 |
| [ 14.166213] sd 1:0:0:0: Attached scsi generic sg1 type 0 |
| [ 14.168295] sd 2:0:0:0: Attached scsi generic sg2 type 0 |
| [ 14.190082] Non-volatile memory driver v1.3 |
| [ 14.216745] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 |
| [ 14.220001] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560) |
| [ 14.223327] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) |
| [ 14.225977] input: PC Speaker as /devices/platform/pcspkr/input/input24 |
| [ 14.231064] thinkpad_acpi: ThinkPad ACPI Extras v0.26 |
| [ 14.232957] thinkpad_acpi: http://ibm-acpi.sf.net/ |
| [ 14.234838] thinkpad_acpi: ThinkPad BIOS CBET4000 4.11-649-g6ad0ab1a69, EC G7HT39WW-3.22 |
| [ 14.236740] thinkpad_acpi: Lenovo ThinkPad T430s, model 23532NU |
| [ 14.242862] thinkpad_acpi: radio switch found; radios are enabled |
| [ 14.245936] thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode |
| [ 14.249021] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver |
| [ 14.250916] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... |
| [ 14.263782] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer |
| [ 14.265801] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules |
| [ 14.267672] RAPL PMU: hw unit of domain package 2^-16 Joules |
| [ 14.269534] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules |
| [ 14.272505] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked |
| [ 14.282589] thinkpad_acpi: rfkill switch tpacpi_wwan_sw: radio is unblocked |
| [ 14.301106] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one |
| [ 14.303440] thinkpad_acpi: Console audio control enabled, mode: monitor (read only) |
| [ 14.303585] wl: loading out-of-tree module taints kernel. |
| [ 14.307301] wl: module license 'MIXED/Proprietary' taints kernel. |
| [ 14.309223] Disabling lock debugging due to kernel taint |
| [ 14.315834] thinkpad_acpi: battery 1 registered (start 0, stop 100) |
| [ 14.315849] battery: new extension: ThinkPad Battery Extension |
| [ 14.316229] wl: module verification failed: signature and/or required key missing - tainting kernel |
| [ 14.319910] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input25 |
| [ 14.406959] wlan0: Broadcom BCM43a0 802.11 Hybrid Wireless Controller 6.30.223.271 (r587334) |
| |
| [ 14.432575] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) |
| [ 14.506103] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker |
| [ 14.506106] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) |
| [ 14.506107] snd_hda_codec_realtek hdaudioC0D0: hp_outs=2 (0x15/0x1b/0x0/0x0/0x0) |
| [ 14.506108] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 |
| [ 14.506109] snd_hda_codec_realtek hdaudioC0D0: inputs: |
| [ 14.506111] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18 |
| [ 14.506112] snd_hda_codec_realtek hdaudioC0D0: Dock Mic=0x19 |
| [ 14.506113] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12 |
| [ 14.525864] Adding 16699388k swap on /dev/mapper/TP--T430s--vg-swap_1. Priority:-2 extents:1 across:16699388k SSFS |
| [ 14.536384] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input26 |
| [ 14.536455] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input27 |
| [ 14.536508] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input28 |
| [ 14.536561] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input29 |
| [ 14.536613] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input30 |
| [ 14.536665] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input31 |
| [ 14.536715] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input32 |
| [ 14.536766] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input33 |
| [ 14.670907] wl 0000:01:00.0 wlp1s0: renamed from wlan0 |
| [ 14.763682] intel_rapl_common: Found RAPL domain package |
| [ 14.765559] intel_rapl_common: Found RAPL domain core |
| [ 14.767412] intel_rapl_common: Found RAPL domain uncore |
| [ 14.928934] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem |
| [ 14.934421] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null) |
| [ 14.936841] ext2 filesystem being mounted at /boot supports timestamps until 2038 (0x7fffffff) |
| [ 15.091441] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) |
| [ 15.153329] audit: type=1400 audit(1577843360.317:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1236 comm="apparmor_parser" |
| [ 15.155817] audit: type=1400 audit(1577843360.317:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1236 comm="apparmor_parser" |
| [ 15.155822] audit: type=1400 audit(1577843360.317:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1236 comm="apparmor_parser" |
| [ 15.156266] audit: type=1400 audit(1577843360.317:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/mysqld" pid=1237 comm="apparmor_parser" |
| [ 15.161393] audit: type=1400 audit(1577843360.321:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="system_tor" pid=1238 comm="apparmor_parser" |
| [ 15.161616] audit: type=1400 audit(1577843360.325:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=1235 comm="apparmor_parser" |
| [ 15.168348] audit: type=1400 audit(1577843360.333:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/haveged" pid=1243 comm="apparmor_parser" |
| [ 15.170357] audit: type=1400 audit(1577843360.333:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/freshclam" pid=1241 comm="apparmor_parser" |
| [ 15.173276] audit: type=1400 audit(1577843360.341:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ioquake3" pid=1240 comm="apparmor_parser" |
| [ 15.173280] audit: type=1400 audit(1577843360.341:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ioquake3//popup" pid=1240 comm="apparmor_parser" |
| [ 15.288191] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input34 |
| [ 15.416116] Process accounting resumed |
| [ 16.168175] vboxdrv: Found 4 processor cores |
| [ 16.197889] vboxdrv: TSC mode is Invariant, tentative frequency 2893423503 Hz |
| [ 16.199181] vboxdrv: Successfully loaded version 6.1.0_Debian (interface 0x002d0001) |
| [ 16.411888] VBoxNetFlt: Successfully started. |
| [ 16.425002] VBoxNetAdp: Successfully started. |
| [ 16.973204] mc: Linux media interface: v0.10 |
| [ 16.992442] alg: No test for fips(ansi_cprng) (fips_ansi_cprng) |
| [ 16.999614] videodev: Linux video capture interface: v2.00 |
| [ 17.106840] Bluetooth: Core ver 2.22 |
| [ 17.112335] NET: Registered protocol family 31 |
| [ 17.113630] Bluetooth: HCI device and connection manager initialized |
| [ 17.115192] Bluetooth: HCI socket layer initialized |
| [ 17.117012] Bluetooth: L2CAP socket layer initialized |
| [ 17.117970] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:02d5) |
| [ 17.118343] Bluetooth: SCO socket layer initialized |
| [ 17.131945] uvcvideo 1-1.6:1.0: Entity type for entity Extension 4 was not initialized! |
| [ 17.133437] uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized! |
| [ 17.136100] uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized! |
| [ 17.140197] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized! |
| [ 17.150080] usbcore: registered new interface driver btusb |
| [ 17.151878] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input35 |
| [ 17.153317] usbcore: registered new interface driver uvcvideo |
| [ 17.154729] USB Video Class driver (1.1.1) |
| [ 17.251393] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 |
| [ 17.252845] Bluetooth: BNEP filters: protocol multicast |
| [ 17.254280] Bluetooth: BNEP socket layer initialized |
| [ 17.263210] Bluetooth: hci0: BCM: chip id 63 |
| [ 17.266210] Bluetooth: hci0: BCM: features 0x07 |
| [ 17.284212] Bluetooth: hci0: TP-T430s |
| [ 17.286210] Bluetooth: hci0: BCM20702A1 (001.002.014) build 1669 |
| [ 17.292486] bluetooth hci0: firmware: direct-loading firmware brcm/BCM20702A1-0a5c-21e6.hcd |
| [ 18.146210] Bluetooth: hci0: BCM20702A1 (001.002.014) build 1669 |
| [ 18.162219] Bluetooth: hci0: Broadcom Bluetooth Device |
| [ 18.336225] Bluetooth: RFCOMM TTY layer initialized |
| [ 18.336232] Bluetooth: RFCOMM socket layer initialized |
| [ 18.336236] Bluetooth: RFCOMM ver 1.11 |
| [ 19.232096] usbcore: registered new interface driver usbserial_generic |
| [ 19.233745] usbserial: USB Serial support registered for generic |
| [ 19.239733] usbcore: registered new interface driver pl2303 |
| [ 19.241452] usbserial: USB Serial support registered for pl2303 |
| [ 19.242727] usblp 4-1.5.6.1.2:1.0: usblp3: USB Bidirectional printer dev 10 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 |
| [ 19.244047] pl2303 4-1.5.6.1.3:1.0: pl2303 converter detected |
| [ 19.244847] usbcore: registered new interface driver usblp |
| [ 19.249437] usb 4-1.5.6.1.3: pl2303 converter now attached to ttyUSB0 |
| [ 21.110288] logitech-hidpp-device 0003:046D:1028.0004: HID++ 1.0 device connected. |
| [ 21.391291] rfkill: input handler disabled |
| [ 22.754178] e1000e: eno0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None |
| [ 22.754219] IPv6: ADDRCONF(NETDEV_CHANGE): eno0: link becomes ready |
| [ 23.075976] kauditd_printk_skb: 32 callbacks suppressed |
| [ 23.075977] audit: type=1400 audit(1577843368.237:44): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=3012 comm="apparmor_parser" |
| [ 23.195712] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. |
| [ 23.197495] Bridge firewalling registered |
| [ 23.386910] Initializing XFRM netlink socket |
| [ 28.396411] rfkill: input handler enabled |
| [ 28.566194] e1000e: eno0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None |
| [ 31.955782] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready |
| [ 34.490406] rfkill: input handler disabled |