blob: 18e6ca1d6fc99f760a8144ae61542fb7205cd768 [file] [log] [blame]
[ 0.000000] Linux version 5.6.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 9.3.0 (Debian 9.3.0-11)) #1 SMP Debian 5.6.7-1 (2020-04-29)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-5.6.0-1-amd64 root=/dev/mapper/TP--T430s--vg-root ro iomem=relaxed
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ff28fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007ff29000-0x00000000829fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000047b5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: LENOVO 23532NU/23532NU, BIOS CBET4000 4.11-2601-gd9b2f7971a 05/05/2020
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2893.309 MHz processor
[ 0.001930] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.001931] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.001934] last_pfn = 0x47b600 max_arch_pfn = 0x400000000
[ 0.001938] MTRR default type: write-back
[ 0.001939] MTRR fixed ranges enabled:
[ 0.001940] 00000-9FFFF write-back
[ 0.001941] A0000-BFFFF uncachable
[ 0.001941] C0000-FFFFF write-back
[ 0.001942] MTRR variable ranges enabled:
[ 0.001943] 0 base 080000000 mask FC0000000 uncachable
[ 0.001944] 1 base 0C0000000 mask FF0000000 uncachable
[ 0.001945] 2 base 0D0000000 mask FF0000000 write-combining
[ 0.001945] 3 base 0E0000000 mask FE0000000 uncachable
[ 0.001946] 4 disabled
[ 0.001946] 5 disabled
[ 0.001947] 6 disabled
[ 0.001947] 7 disabled
[ 0.001948] 8 disabled
[ 0.001948] 9 disabled
[ 0.002215] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.002566] last_pfn = 0x7ff29 max_arch_pfn = 0x400000000
[ 0.011957] BRK [0x458a01000, 0x458a01fff] PGTABLE
[ 0.011960] BRK [0x458a02000, 0x458a02fff] PGTABLE
[ 0.011961] BRK [0x458a03000, 0x458a03fff] PGTABLE
[ 0.011981] BRK [0x458a04000, 0x458a04fff] PGTABLE
[ 0.011982] BRK [0x458a05000, 0x458a05fff] PGTABLE
[ 0.012041] BRK [0x458a06000, 0x458a06fff] PGTABLE
[ 0.012058] BRK [0x458a07000, 0x458a07fff] PGTABLE
[ 0.012074] BRK [0x458a08000, 0x458a08fff] PGTABLE
[ 0.012085] BRK [0x458a09000, 0x458a09fff] PGTABLE
[ 0.012097] BRK [0x458a0a000, 0x458a0afff] PGTABLE
[ 0.012108] BRK [0x458a0b000, 0x458a0bfff] PGTABLE
[ 0.012119] BRK [0x458a0c000, 0x458a0cfff] PGTABLE
[ 0.012227] RAMDISK: [mem 0x305e9000-0x342ebfff]
[ 0.012233] ACPI: Early table checksum verification disabled
[ 0.012236] ACPI: RSDP 0x00000000000F7590 000024 (v02 COREv4)
[ 0.012239] ACPI: XSDT 0x000000007FF4F0E0 00005C (v01 COREv4 COREBOOT 00000000 CORE 20200110)
[ 0.012244] ACPI: FACP 0x000000007FF52CC0 000114 (v06 COREv4 COREBOOT 00000000 CORE 20200110)
[ 0.012248] ACPI: DSDT 0x000000007FF4F280 003A39 (v02 COREv4 COREBOOT 20110725 INTL 20200110)
[ 0.012251] ACPI: FACS 0x000000007FF4F240 000040
[ 0.012253] ACPI: FACS 0x000000007FF4F240 000040
[ 0.012255] ACPI: SSDT 0x000000007FF52DE0 001AC5 (v02 COREv4 COREBOOT 0000002A CORE 20200110)
[ 0.012258] ACPI: MCFG 0x000000007FF548B0 00003C (v01 COREv4 COREBOOT 00000000 CORE 20200110)
[ 0.012261] ACPI: TCPA 0x000000007FF548F0 000032 (v02 COREv4 COREBOOT 00000000 CORE 20200110)
[ 0.012263] ACPI: APIC 0x000000007FF54930 00006C (v03 COREv4 COREBOOT 00000000 CORE 20200110)
[ 0.012266] ACPI: DMAR 0x000000007FF549A0 0000D0 (v01 COREv4 COREBOOT 00000000 CORE 20200110)
[ 0.012268] ACPI: HPET 0x000000007FF56A70 000038 (v01 COREv4 COREBOOT 00000000 CORE 20200110)
[ 0.012275] ACPI: Local APIC address 0xfee00000
[ 0.012347] No NUMA configuration found
[ 0.012348] Faking a node at [mem 0x0000000000000000-0x000000047b5fffff]
[ 0.012351] NODE_DATA(0) allocated [mem 0x47b5f3000-0x47b5f7fff]
[ 0.012380] Zone ranges:
[ 0.012381] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.012383] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.012384] Normal [mem 0x0000000100000000-0x000000047b5fffff]
[ 0.012385] Device empty
[ 0.012386] Movable zone start for each node
[ 0.012386] Early memory node ranges
[ 0.012387] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.012389] node 0: [mem 0x0000000000100000-0x000000007ff28fff]
[ 0.012390] node 0: [mem 0x0000000100000000-0x000000047b5fffff]
[ 0.012565] Zeroed struct page in unavailable ranges: 19257 pages
[ 0.012566] Initmem setup node 0 [mem 0x0000000000001000-0x000000047b5fffff]
[ 0.012568] On node 0 totalpages: 4175047
[ 0.012569] DMA zone: 64 pages used for memmap
[ 0.012569] DMA zone: 21 pages reserved
[ 0.012570] DMA zone: 3998 pages, LIFO batch:0
[ 0.012637] DMA32 zone: 8125 pages used for memmap
[ 0.012638] DMA32 zone: 519977 pages, LIFO batch:63
[ 0.020975] Normal zone: 57048 pages used for memmap
[ 0.020976] Normal zone: 3651072 pages, LIFO batch:63
[ 0.021507] Reserving Intel graphics memory at [mem 0x80a00000-0x829fffff]
[ 0.021748] ACPI: PM-Timer IO Port: 0x508
[ 0.021750] ACPI: Local APIC address 0xfee00000
[ 0.021765] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.021768] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.021769] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.021771] ACPI: IRQ0 used by override.
[ 0.021772] ACPI: IRQ9 used by override.
[ 0.021773] Using ACPI (MADT) for SMP configuration information
[ 0.021775] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.021779] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.021789] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.021790] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.021791] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.021791] PM: hibernation: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.021793] PM: hibernation: Registered nosave memory: [mem 0x7ff29000-0x829fffff]
[ 0.021794] PM: hibernation: Registered nosave memory: [mem 0x82a00000-0xefffffff]
[ 0.021794] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
[ 0.021795] PM: hibernation: Registered nosave memory: [mem 0xf4000000-0xfed3ffff]
[ 0.021796] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[ 0.021797] PM: hibernation: Registered nosave memory: [mem 0xfed45000-0xfed8ffff]
[ 0.021797] PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfed91fff]
[ 0.021798] PM: hibernation: Registered nosave memory: [mem 0xfed92000-0xffffffff]
[ 0.021800] [mem 0x82a00000-0xefffffff] available for PCI devices
[ 0.021801] Booting paravirtualized kernel on bare hardware
[ 0.021804] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.025112] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.025268] percpu: Embedded 55 pages/cpu s188120 r8192 d28968 u524288
[ 0.025272] pcpu-alloc: s188120 r8192 d28968 u524288 alloc=1*2097152
[ 0.025273] pcpu-alloc: [0] 0 1 2 3
[ 0.025291] Built 1 zonelists, mobility grouping on. Total pages: 4109789
[ 0.025292] Policy zone: Normal
[ 0.025293] Kernel command line: BOOT_IMAGE=/vmlinuz-5.6.0-1-amd64 root=/dev/mapper/TP--T430s--vg-root ro iomem=relaxed
[ 0.026138] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ 0.026518] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.026568] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.039434] Memory: 2098876K/16700188K available (10243K kernel code, 1283K rwdata, 3968K rodata, 1608K init, 1988K bss, 440832K reserved, 0K cma-reserved)
[ 0.039440] random: get_random_u64 called from __kmem_cache_create+0x3e/0x530 with crng_init=0
[ 0.039533] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.039544] Kernel/User page tables isolation: enabled
[ 0.039555] ftrace: allocating 34607 entries in 136 pages
[ 0.050688] ftrace: allocated 136 pages with 2 groups
[ 0.050754] rcu: Hierarchical RCU implementation.
[ 0.050756] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.050757] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.050758] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.053414] NR_IRQS: 33024, nr_irqs: 456, preallocated irqs: 16
[ 0.053618] random: crng done (trusting CPU's manufacturer)
[ 0.055173] Console: colour VGA+ 80x25
[ 0.060953] printk: console [tty0] enabled
[ 0.061021] ACPI: Core revision 20200110
[ 0.061136] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.061221] APIC: Switch to symmetric I/O mode setup
[ 0.061278] DMAR: Host address width 36
[ 0.061333] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.061393] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[ 0.061460] DMAR: RMRR base: 0x00000080800000 end: 0x000000829fffff
[ 0.061518] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.061576] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[ 0.061648] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.061706] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.061764] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.062210] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.062269] x2apic enabled
[ 0.062325] Switched APIC routing to cluster x2apic.
[ 0.062808] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.081222] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x29b49260d5b, max_idle_ns: 440795334477 ns
[ 0.081299] Calibrating delay loop (skipped), value calculated using timer frequency.. 5786.61 BogoMIPS (lpj=11573236)
[ 0.081373] pid_max: default: 32768 minimum: 301
[ 0.081454] LSM: Security Framework initializing
[ 0.081515] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.081589] AppArmor: AppArmor initialized
[ 0.081646] TOMOYO Linux initialized
[ 0.081733] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.081828] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.082113] mce: CPU0: Thermal monitoring enabled (TM1)
[ 0.082179] process: using mwait in idle threads
[ 0.082237] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.082292] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.082352] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.082421] Spectre V2 : Mitigation: Full generic retpoline
[ 0.082479] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.082549] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.082608] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.082679] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[ 0.082739] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.082813] MDS: Mitigation: Clear CPU buffers
[ 0.083009] Freeing SMP alternatives memory: 32K
[ 0.084667] TSC deadline timer enabled
[ 0.084670] smpboot: CPU0: Intel(R) Core(TM) i7-3520M CPU @ 2.90GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[ 0.084838] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.084916] ... version: 3
[ 0.084972] ... bit width: 48
[ 0.085026] ... generic registers: 4
[ 0.085079] ... value mask: 0000ffffffffffff
[ 0.085136] ... max period: 00007fffffffffff
[ 0.085193] ... fixed-purpose events: 3
[ 0.085248] ... event mask: 000000070000000f
[ 0.085295] rcu: Hierarchical SRCU implementation.
[ 0.085295] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.085295] smp: Bringing up secondary CPUs ...
[ 0.085295] x86: Booting SMP configuration:
[ 0.085295] .... node #0, CPUs: #1
[ 0.085374] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[ 0.085547] #2 #3
[ 0.091443] smp: Brought up 1 node, 4 CPUs
[ 0.091443] smpboot: Max logical packages: 1
[ 0.091443] smpboot: Total of 4 processors activated (23146.47 BogoMIPS)
[ 0.137304] node 0 initialised, 3540120 pages in 44ms
[ 0.137616] devtmpfs: initialized
[ 0.137616] x86/mm: Memory block size: 128MB
[ 0.141727] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.141727] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.141727] pinctrl core: initialized pinctrl subsystem
[ 0.141727] thermal_sys: Registered thermal governor 'fair_share'
[ 0.141727] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.141727] thermal_sys: Registered thermal governor 'step_wise'
[ 0.141774] thermal_sys: Registered thermal governor 'user_space'
[ 0.141931] NET: Registered protocol family 16
[ 0.142111] audit: initializing netlink subsys (disabled)
[ 0.142171] audit: type=2000 audit(1588701457.080:1): state=initialized audit_enabled=0 res=1
[ 0.142171] cpuidle: using governor ladder
[ 0.142171] cpuidle: using governor menu
[ 0.142171] ACPI: bus type PCI registered
[ 0.142171] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.142171] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.142171] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.142171] PCI: Using configuration type 1 for base access
[ 0.142171] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.142652] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.289495] ACPI: Added _OSI(Module Device)
[ 0.289495] ACPI: Added _OSI(Processor Device)
[ 0.289495] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.289544] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.289601] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.289658] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.289713] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.291763] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.292495] ACPI: EC: EC started
[ 0.292549] ACPI: EC: interrupt blocked
[ 0.292874] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.292933] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC used to handle transactions
[ 0.293002] ACPI: Interpreter enabled
[ 0.293072] ACPI: (supports S0 S3 S4 S5)
[ 0.293299] ACPI: Using IOAPIC for interrupt routing
[ 0.293370] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.293552] ACPI: Enabled 1 GPEs in block 00 to 3F
[ 0.296275] ACPI: Power Resource [FPWR] (off)
[ 0.296553] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.296616] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.296725] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[ 0.296803] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.296914] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff window] (conflicts with Video ROM [mem 0x000c0000-0x000cf1ff])
[ 0.297303] acpi PNP0A08:00: ignoring host bridge window [mem 0x000d0000-0x000d3fff window] (conflicts with Adapter ROM [mem 0x000cf800-0x000d05ff])
[ 0.297521] PCI host bridge to bus 0000:00
[ 0.297577] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.297638] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.297698] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.297768] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.297837] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.297907] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.297973] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.298042] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.298111] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.298179] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.298251] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.298319] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.298389] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.298459] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[ 0.298528] pci_bus 0000:00: root bus resource [mem 0x82a00000-0xefffffff window]
[ 0.298598] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[ 0.298667] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.298731] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.298876] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 0.298942] pci 0000:00:02.0: reg 0x10: [mem 0xe2400000-0xe27fffff 64bit]
[ 0.299003] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.299075] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f]
[ 0.299204] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000
[ 0.299270] pci 0000:00:04.0: reg 0x10: [mem 0xe2b30000-0xe2b37fff 64bit]
[ 0.299415] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.299495] pci 0000:00:14.0: reg 0x10: [mem 0xe2b20000-0xe2b2ffff 64bit]
[ 0.299618] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.299749] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[ 0.299824] pci 0000:00:19.0: reg 0x10: [mem 0xe2b00000-0xe2b1ffff]
[ 0.299888] pci 0000:00:19.0: reg 0x14: [mem 0xe2b3c000-0xe2b3cfff]
[ 0.299953] pci 0000:00:19.0: reg 0x18: [io 0x4040-0x405f]
[ 0.300067] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.300188] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.300265] pci 0000:00:1a.0: reg 0x10: [mem 0xe2b3f000-0xe2b3f3ff]
[ 0.300402] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.300534] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.300612] pci 0000:00:1b.0: reg 0x10: [mem 0xe2b38000-0xe2b3bfff 64bit]
[ 0.300742] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.300880] pci 0000:00:1c.0: [8086:1e12] type 01 class 0x060400
[ 0.301091] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.301181] pci 0000:00:1c.0: Enabling MPC IRBNCE
[ 0.301240] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled
[ 0.301399] pci 0000:00:1c.1: [8086:1e14] type 01 class 0x060400
[ 0.301635] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.301723] pci 0000:00:1c.1: Enabling MPC IRBNCE
[ 0.301783] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled
[ 0.301922] pci 0000:00:1c.2: [8086:1e18] type 01 class 0x060400
[ 0.302157] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.302243] pci 0000:00:1c.2: Enabling MPC IRBNCE
[ 0.302298] pci 0000:00:1c.2: Intel PCH root port ACS workaround enabled
[ 0.302438] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.302518] pci 0000:00:1d.0: reg 0x10: [mem 0xe2b40000-0xe2b403ff]
[ 0.302655] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.302786] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100
[ 0.303010] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.303085] pci 0000:00:1f.2: reg 0x10: [io 0x4080-0x4087]
[ 0.303150] pci 0000:00:1f.2: reg 0x14: [io 0x4090-0x4093]
[ 0.303212] pci 0000:00:1f.2: reg 0x18: [io 0x4088-0x408f]
[ 0.303276] pci 0000:00:1f.2: reg 0x1c: [io 0x4094-0x4097]
[ 0.303339] pci 0000:00:1f.2: reg 0x20: [io 0x4060-0x407f]
[ 0.303403] pci 0000:00:1f.2: reg 0x24: [mem 0xe2b3e000-0xe2b3e7ff]
[ 0.303498] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.303620] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.303695] pci 0000:00:1f.3: reg 0x10: [mem 0xe2b41000-0xe2b410ff 64bit]
[ 0.303770] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.303907] pci 0000:00:1f.6: [8086:1e24] type 00 class 0x118000
[ 0.303987] pci 0000:00:1f.6: reg 0x10: [mem 0xe2b3d000-0xe2b3dfff 64bit]
[ 0.304267] pci 0000:01:00.0: [14e4:43a0] type 00 class 0x028000
[ 0.304421] pci 0000:01:00.0: reg 0x10: [mem 0xe2a00000-0xe2a07fff 64bit]
[ 0.304538] pci 0000:01:00.0: reg 0x18: [mem 0xe2800000-0xe29fffff 64bit]
[ 0.304847] pci 0000:01:00.0: supports D1 D2
[ 0.304902] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.305259] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.305305] pci 0000:00:1c.0: bridge window [mem 0xe2800000-0xe2afffff]
[ 0.305511] pci 0000:02:00.0: [1180:e823] type 00 class 0x080500
[ 0.305803] pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz.
[ 0.306104] pci 0000:02:00.0: reg 0x10: [mem 0xe0800000-0xe08000ff]
[ 0.306673] pci 0000:02:00.0: supports D1 D2
[ 0.306729] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.307372] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.307434] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 0.307496] pci 0000:00:1c.1: bridge window [mem 0xe0000000-0xe08fffff]
[ 0.307561] pci 0000:00:1c.1: bridge window [mem 0xe0c00000-0xe13fffff 64bit pref]
[ 0.307701] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.307763] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
[ 0.307824] pci 0000:00:1c.2: bridge window [mem 0xe1c00000-0xe23fffff]
[ 0.307889] pci 0000:00:1c.2: bridge window [mem 0xe1400000-0xe1bfffff 64bit pref]
[ 0.308102] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.308200] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.308296] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.308390] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.308483] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.308576] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.308670] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.308766] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.309439] ACPI: EC: interrupt unblocked
[ 0.309502] ACPI: EC: event unblocked
[ 0.309559] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.309616] ACPI: EC: GPE=0x11
[ 0.309670] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC used to handle transactions and events
[ 0.309789] iommu: Default domain type: Translated
[ 0.309856] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.309856] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.310704] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.310761] vgaarb: loaded
[ 0.310865] EDAC MC: Ver: 3.0.0
[ 0.313314] PCI: Using ACPI for IRQ routing
[ 0.314831] PCI: pci_cache_line_size set to 64 bytes
[ 0.314831] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.314831] e820: reserve RAM buffer [mem 0x7ff29000-0x7fffffff]
[ 0.314831] e820: reserve RAM buffer [mem 0x47b600000-0x47bffffff]
[ 0.314831] NetLabel: Initializing
[ 0.314831] NetLabel: domain hash size = 128
[ 0.314831] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.314831] NetLabel: unlabeled traffic allowed by default
[ 0.314831] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.314831] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.317314] clocksource: Switched to clocksource tsc-early
[ 0.326365] VFS: Disk quotas dquot_6.6.0
[ 0.326433] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.326585] AppArmor: AppArmor Filesystem Enabled
[ 0.326660] pnp: PnP ACPI init
[ 0.326864] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.326924] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.326983] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.327042] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.327102] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.327162] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.327221] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.327280] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.327339] system 00:00: [mem 0x20000000-0x201fffff] could not be reserved
[ 0.327399] system 00:00: [mem 0x40000000-0x401fffff] could not be reserved
[ 0.327463] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.327880] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.327942] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.327969] system 00:02: [io 0x0500-0x057f] has been reserved
[ 0.328027] system 00:02: [io 0x0480-0x04bf] has been reserved
[ 0.328087] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.328102] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.328125] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.328144] pnp 00:05: Plug and Play ACPI device, IDs LEN0015 PNP0f13 (active)
[ 0.328165] pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active)
[ 0.328187] pnp: PnP ACPI: found 7 devices
[ 0.333741] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.333843] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.333907] pci 0000:00:1c.0: bridge window [mem 0xe2800000-0xe2afffff]
[ 0.333975] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.334034] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 0.334096] pci 0000:00:1c.1: bridge window [mem 0xe0000000-0xe08fffff]
[ 0.334157] pci 0000:00:1c.1: bridge window [mem 0xe0c00000-0xe13fffff 64bit pref]
[ 0.334234] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.334291] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
[ 0.334352] pci 0000:00:1c.2: bridge window [mem 0xe1c00000-0xe23fffff]
[ 0.334414] pci 0000:00:1c.2: bridge window [mem 0xe1400000-0xe1bfffff 64bit pref]
[ 0.334491] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.334549] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.334606] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.334666] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.334725] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.334785] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.334845] pci_bus 0000:00: resource 10 [mem 0x000d4000-0x000d7fff window]
[ 0.334903] pci_bus 0000:00: resource 11 [mem 0x000d8000-0x000dbfff window]
[ 0.334964] pci_bus 0000:00: resource 12 [mem 0x000dc000-0x000dffff window]
[ 0.335023] pci_bus 0000:00: resource 13 [mem 0x000e0000-0x000e3fff window]
[ 0.335083] pci_bus 0000:00: resource 14 [mem 0x000e4000-0x000e7fff window]
[ 0.335143] pci_bus 0000:00: resource 15 [mem 0x000e8000-0x000ebfff window]
[ 0.335202] pci_bus 0000:00: resource 16 [mem 0x000ec000-0x000effff window]
[ 0.335262] pci_bus 0000:00: resource 17 [mem 0x000f0000-0x000fffff window]
[ 0.335321] pci_bus 0000:00: resource 18 [mem 0x82a00000-0xefffffff window]
[ 0.335380] pci_bus 0000:00: resource 19 [mem 0xfed40000-0xfed44fff window]
[ 0.335439] pci_bus 0000:01: resource 1 [mem 0xe2800000-0xe2afffff]
[ 0.335496] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.335550] pci_bus 0000:02: resource 1 [mem 0xe0000000-0xe08fffff]
[ 0.335609] pci_bus 0000:02: resource 2 [mem 0xe0c00000-0xe13fffff 64bit pref]
[ 0.335676] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
[ 0.335733] pci_bus 0000:03: resource 1 [mem 0xe1c00000-0xe23fffff]
[ 0.335791] pci_bus 0000:03: resource 2 [mem 0xe1400000-0xe1bfffff 64bit pref]
[ 0.335918] NET: Registered protocol family 2
[ 0.336080] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 0.336168] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.336379] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.336541] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.336621] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.336706] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.336856] NET: Registered protocol family 1
[ 0.336916] NET: Registered protocol family 44
[ 0.336980] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.337813] PCI: CLS 64 bytes, default 64
[ 0.337906] Trying to unpack rootfs image as initramfs...
[ 1.119412] Freeing initrd memory: 62476K
[ 1.119514] DMAR: No ATSR found
[ 1.119595] DMAR: dmar0: Using Queued invalidation
[ 1.119655] DMAR: dmar1: Using Queued invalidation
[ 1.187858] pci 0000:00:00.0: Adding to iommu group 0
[ 1.190709] pci 0000:00:02.0: Adding to iommu group 1
[ 1.190780] pci 0000:00:02.0: Using iommu direct mapping
[ 1.190867] pci 0000:00:04.0: Adding to iommu group 2
[ 1.190961] pci 0000:00:14.0: Adding to iommu group 3
[ 1.191051] pci 0000:00:19.0: Adding to iommu group 4
[ 1.191146] pci 0000:00:1a.0: Adding to iommu group 5
[ 1.191238] pci 0000:00:1b.0: Adding to iommu group 6
[ 1.191334] pci 0000:00:1c.0: Adding to iommu group 7
[ 1.191423] pci 0000:00:1c.1: Adding to iommu group 8
[ 1.191508] pci 0000:00:1c.2: Adding to iommu group 9
[ 1.191598] pci 0000:00:1d.0: Adding to iommu group 10
[ 1.192999] pci 0000:00:1f.0: Adding to iommu group 11
[ 1.193066] pci 0000:00:1f.2: Adding to iommu group 11
[ 1.193132] pci 0000:00:1f.3: Adding to iommu group 11
[ 1.193198] pci 0000:00:1f.6: Adding to iommu group 11
[ 1.193299] pci 0000:01:00.0: Adding to iommu group 12
[ 1.193390] pci 0000:02:00.0: Adding to iommu group 13
[ 1.193451] DMAR: Intel(R) Virtualization Technology for Directed I/O
[ 1.195533] Initialise system trusted keyrings
[ 1.195600] Key type blacklist registered
[ 1.195696] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[ 1.196748] zbud: loaded
[ 1.196931] Platform Keyring initialized
[ 1.196990] Key type asymmetric registered
[ 1.197047] Asymmetric key parser 'x509' registered
[ 1.197109] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 1.197215] io scheduler mq-deadline registered
[ 1.197517] pcieport 0000:00:1c.0: PME: Signaling with IRQ 26
[ 1.197778] pcieport 0000:00:1c.1: PME: Signaling with IRQ 27
[ 1.197862] pcieport 0000:00:1c.1: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[ 1.198206] pcieport 0000:00:1c.2: PME: Signaling with IRQ 28
[ 1.198291] pcieport 0000:00:1c.2: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[ 1.198507] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.198577] intel_idle: MWAIT substates: 0x21120
[ 1.198578] intel_idle: v0.4.1 model 0x3A
[ 1.198730] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.199998] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.200058] ACPI: Thermal Zone [THM0] (48 C)
[ 1.200856] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.200915] ACPI: Thermal Zone [THM1] (27 C)
[ 1.201073] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.201597] Linux agpgart interface v0.103
[ 1.201694] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 1.201755] AMD-Vi: AMD IOMMUv2 functionality not available on this system
[ 1.202025] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.203980] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.204041] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.204240] mousedev: PS/2 mouse device common for all mice
[ 1.204329] rtc_cmos 00:03: RTC can wake from S4
[ 1.204575] rtc_cmos 00:03: registered as rtc0
[ 1.204655] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.204732] intel_pstate: Intel P-state driver initializing
[ 1.205032] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.205264] drop_monitor: Initializing network drop monitor service
[ 1.205541] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.205795] NET: Registered protocol family 10
[ 1.220440] Segment Routing with IPv6
[ 1.220564] mip6: Mobile IPv6
[ 1.220631] NET: Registered protocol family 17
[ 1.220774] mpls_gso: MPLS GSO support
[ 1.221413] microcode: sig=0x306a9, pf=0x10, revision=0x21
[ 1.221536] microcode: Microcode Update Driver: v2.2.
[ 1.221541] IPI shorthand broadcast: enabled
[ 1.221687] sched_clock: Marking stable (1213599798, 7700602)->(1227797624, -6497224)
[ 1.222020] registered taskstats version 1
[ 1.222089] Loading compiled-in X.509 certificates
[ 1.258967] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[ 1.259072] Loaded X.509 cert 'Debian Secure Boot Signer: 00a7468def'
[ 1.259163] zswap: loaded using pool lzo/zbud
[ 1.259450] Key type ._fscrypt registered
[ 1.259506] Key type .fscrypt registered
[ 1.259561] Key type fscrypt-provisioning registered
[ 1.259627] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.259947] rtc_cmos 00:03: setting system clock to 2020-05-05T17:57:38 UTC (1588701458)
[ 1.261069] Freeing unused kernel image (initmem) memory: 1608K
[ 1.289333] Write protecting the kernel read-only data: 16384k
[ 1.290248] Freeing unused kernel image (text/rodata gap) memory: 2044K
[ 1.290505] Freeing unused kernel image (rodata/data gap) memory: 128K
[ 1.326377] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.326435] x86/mm: Checking user space page tables
[ 1.352854] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.352912] Run /init as init process
[ 1.352967] with arguments:
[ 1.352968] /init
[ 1.352968] with environment:
[ 1.352968] HOME=/
[ 1.352969] TERM=linux
[ 1.352969] BOOT_IMAGE=/vmlinuz-5.6.0-1-amd64
[ 1.457571] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:25/PNP0C09:00/PNP0C0E:00/input/input2
[ 1.457701] ACPI: Sleep Button [SLPB]
[ 1.457815] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:25/PNP0C09:00/PNP0C0D:00/input/input3
[ 1.457928] ACPI: Lid Switch [LID]
[ 1.458039] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 1.458148] ACPI: Power Button [PWRF]
[ 1.473877] pps_core: LinuxPPS API ver. 1 registered
[ 1.473940] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 1.477642] PTP clock support registered
[ 1.478085] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20200110/utaddress-204)
[ 1.478179] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.478253] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20200110/utaddress-204)
[ 1.478344] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.478416] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20200110/utaddress-204)
[ 1.478507] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.478579] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20200110/utaddress-204)
[ 1.478670] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.478742] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 1.492329] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 1.499427] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 1.499488] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.499683] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 1.501425] SCSI subsystem initialized
[ 1.508019] sdhci: Secure Digital Host Controller Interface driver
[ 1.508096] sdhci: Copyright(c) Pierre Ossman
[ 1.508923] battery: ACPI: Battery Slot [BAT0] (battery present)
[ 1.509143] battery: ACPI: Battery Slot [BAT1] (battery absent)
[ 1.518644] sdhci-pci 0000:02:00.0: SDHCI controller found [1180:e823] (rev 4)
[ 1.519208] sdhci-pci 0000:02:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
[ 1.519477] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes
[ 1.523459] ACPI: bus type USB registered
[ 1.523542] usbcore: registered new interface driver usbfs
[ 1.523639] usbcore: registered new interface driver hub
[ 1.523722] usbcore: registered new device driver usb
[ 1.528271] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.528537] sdhci-pci 0000:02:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
[ 1.528888] cryptd: max_cpu_qlen set to 1000
[ 1.529590] ehci-pci: EHCI PCI platform driver
[ 1.529801] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.529865] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.529947] ehci-pci 0000:00:1a.0: debug port 2
[ 1.533928] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.534006] ehci-pci 0000:00:1a.0: irq 19, io mem 0xe2b3f000
[ 1.539525] AVX version of gcm_enc/dec engaged.
[ 1.539584] AES CTR mode by8 optimization enabled
[ 1.542835] mmc0: SDHCI controller on PCI [0000:02:00.0] using DMA
[ 1.549346] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.549472] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.06
[ 1.549548] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.549825] usb usb1: Product: EHCI Host Controller
[ 1.549886] usb usb1: Manufacturer: Linux 5.6.0-1-amd64 ehci_hcd
[ 1.549947] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.550359] hub 1-0:1.0: USB hub found
[ 1.550869] hub 1-0:1.0: 3 ports detected
[ 1.552732] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.553326] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.554898] xhci_hcd 0000:00:14.0: hcc params 0x200071a1 hci version 0x100 quirks 0x000000000000b930
[ 1.554978] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.555184] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.06
[ 1.555256] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.555325] usb usb2: Product: xHCI Host Controller
[ 1.555383] usb usb2: Manufacturer: Linux 5.6.0-1-amd64 xhci-hcd
[ 1.555442] usb usb2: SerialNumber: 0000:00:14.0
[ 1.555603] hub 2-0:1.0: USB hub found
[ 1.555668] hub 2-0:1.0: 4 ports detected
[ 1.555862] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.555924] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
[ 1.556004] ehci-pci 0000:00:1d.0: debug port 2
[ 1.558957] libata version 3.00 loaded.
[ 1.559994] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.560758] ehci-pci 0000:00:1d.0: irq 18, io mem 0xe2b40000
[ 1.560876] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.560938] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 1.561011] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 1.561138] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.06
[ 1.561214] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.561284] usb usb4: Product: xHCI Host Controller
[ 1.561525] usb usb4: Manufacturer: Linux 5.6.0-1-amd64 xhci-hcd
[ 1.561584] usb usb4: SerialNumber: 0000:00:14.0
[ 1.563766] hub 4-0:1.0: USB hub found
[ 1.564355] hub 4-0:1.0: 4 ports detected
[ 1.573361] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.573709] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.06
[ 1.573782] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.573885] usb usb3: Product: EHCI Host Controller
[ 1.573943] usb usb3: Manufacturer: Linux 5.6.0-1-amd64 ehci_hcd
[ 1.574002] usb usb3: SerialNumber: 0000:00:1d.0
[ 1.574583] hub 3-0:1.0: USB hub found
[ 1.574646] hub 3-0:1.0: 3 ports detected
[ 1.579911] ahci 0000:00:1f.2: version 3.0
[ 1.580465] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 1.590624] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x17 impl SATA mode
[ 1.590699] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst
[ 1.593352] scsi host0: ahci
[ 1.593521] scsi host1: ahci
[ 1.593651] scsi host2: ahci
[ 1.593778] scsi host3: ahci
[ 1.593907] scsi host4: ahci
[ 1.594035] scsi host5: ahci
[ 1.594131] ata1: SATA max UDMA/133 abar m2048@0xe2b3e000 port 0xe2b3e100 irq 31
[ 1.594201] ata2: SATA max UDMA/133 abar m2048@0xe2b3e000 port 0xe2b3e180 irq 31
[ 1.594270] ata3: SATA max UDMA/133 abar m2048@0xe2b3e000 port 0xe2b3e200 irq 31
[ 1.594339] ata4: DUMMY
[ 1.594394] ata5: SATA max UDMA/133 abar m2048@0xe2b3e000 port 0xe2b3e300 irq 31
[ 1.594464] ata6: DUMMY
[ 1.635340] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[ 1.651303] i915 0000:00:02.0: VT-d active for gfx access
[ 1.651363] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 1.652246] Console: switching to colour dummy device 80x25
[ 1.652297] i915 0000:00:02.0: DMAR active, disabling use of stolen memory
[ 1.686465] mmc0: new high speed SD card at address e42f
[ 1.689367] mmcblk0: mmc0:e42f SD02G 1.89 GiB
[ 1.690446] mmcblk0: p1
[ 1.703885] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.703889] [drm] Driver supports precise vblank timestamp query.
[ 1.704159] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.733021] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 3c:97:0e:46:56:66
[ 1.733025] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 1.733063] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
[ 1.734102] e1000e 0000:00:19.0 eno0: renamed from eth0
[ 1.767553] [drm] Initialized i915 1.6.0 20200114 for 0000:00:02.0 on minor 0
[ 1.767809] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.790733] acpi device:30: registered as cooling_device5
[ 1.790897] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 1.893314] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.893339] usb 2-3: new high-speed USB device number 2 using xhci_hcd
[ 1.909310] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 1.911923] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.912750] ata1.00: ATA-9: KINGSTON SKC400S37512G, SAFM001B, max UDMA/133
[ 1.912754] ata1.00: 1000215216 sectors, multi 0: LBA48 NCQ (depth 32), AA
[ 1.912878] ata1.00: configured for UDMA/133
[ 1.912978] scsi 0:0:0:0: Direct-Access ATA KINGSTON SKC400S 001B PQ: 0 ANSI: 5
[ 1.915292] usb 2-3: New USB device found, idVendor=2109, idProduct=2813, bcdDevice= 2.21
[ 1.915296] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.915297] usb 2-3: Product: USB2.0 Hub
[ 1.915299] usb 2-3: Manufacturer: VIA Labs, Inc.
[ 1.916237] hub 2-3:1.0: USB hub found
[ 1.916402] hub 2-3:1.0: 4 ports detected
[ 1.922375] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 1.922394] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.922839] hub 1-1:1.0: USB hub found
[ 1.923011] hub 1-1:1.0: 6 ports detected
[ 1.938570] usb 3-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 1.938580] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.939257] hub 3-1:1.0: USB hub found
[ 1.939450] hub 3-1:1.0: 8 ports detected
[ 2.096001] fbcon: i915drmfb (fb0) is primary device
[ 2.106510] usb 4-3: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[ 2.205382] tsc: Refined TSC clocksource calibration: 2893.431 MHz
[ 2.205398] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29b505e2cff, max_idle_ns: 440795342178 ns
[ 2.205437] clocksource: Switched to clocksource tsc
[ 2.217387] usb 1-1.3: new full-speed USB device number 3 using ehci-pci
[ 2.228587] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.229386] usb 3-1.5: new high-speed USB device number 3 using ehci-pci
[ 2.233243] psmouse serio1: synaptics: queried max coordinates: x [..5470], y [..4498]
[ 2.250952] usb 4-3: New USB device found, idVendor=2109, idProduct=0813, bcdDevice= 2.21
[ 2.250956] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.250958] usb 4-3: Product: USB3.0 Hub
[ 2.250960] usb 4-3: Manufacturer: VIA Labs, Inc.
[ 2.254168] hub 4-3:1.0: USB hub found
[ 2.254428] hub 4-3:1.0: 4 ports detected
[ 2.262352] usb 3-1.5: New USB device found, idVendor=17ef, idProduct=100a, bcdDevice= 0.00
[ 2.262355] usb 3-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.262869] hub 3-1.5:1.0: USB hub found
[ 2.263087] hub 3-1.5:1.0: 6 ports detected
[ 2.269558] ata2.00: ATA-10: ST2000LM015-2E8174, SDM1, max UDMA/133
[ 2.269561] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 2.296926] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b1/0xb40000/0xa0000/0x0, board id: 0, fw id: 920262
[ 2.296937] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[ 2.327098] usb 1-1.3: New USB device found, idVendor=147e, idProduct=2020, bcdDevice= 0.01
[ 2.327101] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.327104] usb 1-1.3: Product: Biometric Coprocessor
[ 2.327106] usb 1-1.3: Manufacturer: Auth
[ 2.337458] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[ 2.405415] usb 1-1.4: new full-speed USB device number 4 using ehci-pci
[ 2.521972] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=21e6, bcdDevice= 1.12
[ 2.521975] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.521978] usb 1-1.4: Product: BCM20702A0
[ 2.521980] usb 1-1.4: Manufacturer: Broadcom Corp
[ 2.521982] usb 1-1.4: SerialNumber: B8763FA9D32E
[ 2.557393] usb 3-1.5.1: new full-speed USB device number 4 using ehci-pci
[ 2.601394] usb 1-1.6: new high-speed USB device number 5 using ehci-pci
[ 2.638280] usb 1-1.6: New USB device found, idVendor=5986, idProduct=02d5, bcdDevice=10.11
[ 2.638284] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.638286] usb 1-1.6: Product: Integrated Camera
[ 2.638288] usb 1-1.6: Manufacturer: Ricoh Company Ltd.
[ 2.642445] ata2.00: configured for UDMA/133
[ 2.651867] scsi 1:0:0:0: Direct-Access ATA ST2000LM015-2E81 SDM1 PQ: 0 ANSI: 5
[ 2.671810] usb 3-1.5.1: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.11
[ 2.671813] usb 3-1.5.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.671816] usb 3-1.5.1: Product: USB Receiver
[ 2.671817] usb 3-1.5.1: Manufacturer: Logitech
[ 2.681905] hid: raw HID events driver (C) Jiri Kosina
[ 2.691604] usbcore: registered new interface driver usbhid
[ 2.691605] usbhid: USB HID core driver
[ 2.693311] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.5/3-1.5.1/3-1.5.1:1.0/0003:046D:C52B.0001/input/input8
[ 2.753415] usb 3-1.5.3: new high-speed USB device number 5 using ehci-pci
[ 2.754341] hid-generic 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1.5.1/input0
[ 2.755274] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.5/3-1.5.1/3-1.5.1:1.1/0003:046D:C52B.0002/input/input9
[ 2.755590] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.5/3-1.5.1/3-1.5.1:1.1/0003:046D:C52B.0002/input/input10
[ 2.786586] usb 3-1.5.3: New USB device found, idVendor=0409, idProduct=005a, bcdDevice= 1.00
[ 2.786590] usb 3-1.5.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.787284] hub 3-1.5.3:1.0: USB hub found
[ 2.787461] hub 3-1.5.3:1.0: 3 ports detected
[ 2.813543] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.5/3-1.5.1/3-1.5.1:1.1/0003:046D:C52B.0002/input/input11
[ 2.813959] hid-generic 0003:046D:C52B.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.5.1/input1
[ 2.814789] hid-generic 0003:046D:C52B.0003: hiddev1,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.5.1/input2
[ 2.869398] usb 3-1.5.6: new high-speed USB device number 6 using ehci-pci
[ 2.898667] usb 3-1.5.6: New USB device found, idVendor=0409, idProduct=005a, bcdDevice= 1.00
[ 2.898671] usb 3-1.5.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.899208] hub 3-1.5.6:1.0: USB hub found
[ 2.899589] hub 3-1.5.6:1.0: 4 ports detected
[ 2.903328] Console: switching to colour frame buffer device 240x67
[ 2.966537] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.968740] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
[ 2.971776] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.5.1/input2
[ 2.973911] ata3.00: supports DRM functions and may not be fully accessible
[ 2.988421] ata3.00: ATA-11: KINGSTON SUV500MS240G, 003056RR, max UDMA/133
[ 2.988446] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 2.990456] ata3.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 2.991236] ata3.00: Trusted Computing capability qword not valid!
[ 2.995950] ata3.00: supports DRM functions and may not be fully accessible
[ 2.999168] ata3.00: Trusted Computing capability qword not valid!
[ 2.999184] ata3.00: configured for UDMA/133
[ 3.001892] scsi 2:0:0:0: Direct-Access ATA KINGSTON SUV500M 56RR PQ: 0 ANSI: 5
[ 3.093409] usb 3-1.5.3.3: new full-speed USB device number 7 using ehci-pci
[ 3.097963] input: Logitech Unifying Device. Wireless PID:1028 Mouse as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.5/3-1.5.1/3-1.5.1:1.2/0003:046D:C52B.0003/0003:046D:1028.0004/input/input13
[ 3.103303] hid-generic 0003:046D:1028.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1028] on usb-0000:00:1d.0-1.5.1/input2:1
[ 3.149626] input: Logitech M570 as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.5/3-1.5.1/3-1.5.1:1.2/0003:046D:C52B.0003/0003:046D:1028.0004/input/input17
[ 3.153165] logitech-hidpp-device 0003:046D:1028.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech M570] on usb-0000:00:1d.0-1.5.1/input2:1
[ 3.203203] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input7
[ 3.316615] ata5: SATA link down (SStatus 0 SControl 300)
[ 3.338263] sd 2:0:0:0: [sdc] 468862128 512-byte logical blocks: (240 GB/224 GiB)
[ 3.338765] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 3.338808] sd 0:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/477 GiB)
[ 3.338821] sd 0:0:0:0: [sda] Write Protect is off
[ 3.338823] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.338842] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.340420] sd 2:0:0:0: [sdc] 4096-byte physical blocks
[ 3.340437] sd 2:0:0:0: [sdc] Write Protect is off
[ 3.342611] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 3.342632] sd 1:0:0:0: [sdb] Write Protect is off
[ 3.344824] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 3.346967] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.347054] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.349188] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.362853] sda: sda1 sda2 < sda5 >
[ 3.365494] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.377991] sdc: sdc1 sdc2 sdc3
[ 3.381725] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 3.386244] sdb: sdb1
[ 3.389972] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 3.445474] usb 3-1.5.2: new full-speed USB device number 8 using ehci-pci
[ 3.561722] usb 3-1.5.2: New USB device found, idVendor=04b4, idProduct=4042, bcdDevice= 1.03
[ 3.564007] usb 3-1.5.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.569885] input: HID 04b4:4042 as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.5/3-1.5.2/3-1.5.2:1.0/0003:04B4:4042.0005/input/input18
[ 3.629637] hid-generic 0003:04B4:4042.0005: input,hidraw2: USB HID v1.11 Keyboard [HID 04b4:4042] on usb-0000:00:1d.0-1.5.2/input0
[ 3.637344] usb 3-1.5.6.1: new high-speed USB device number 9 using ehci-pci
[ 3.641465] input: HID 04b4:4042 Mouse as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.5/3-1.5.2/3-1.5.2:1.1/0003:04B4:4042.0006/input/input19
[ 3.643395] input: HID 04b4:4042 System Control as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.5/3-1.5.2/3-1.5.2:1.1/0003:04B4:4042.0006/input/input20
[ 3.670464] usb 3-1.5.6.1: New USB device found, idVendor=0409, idProduct=005a, bcdDevice= 1.00
[ 3.674097] usb 3-1.5.6.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.674524] hub 3-1.5.6.1:1.0: USB hub found
[ 3.680719] hub 3-1.5.6.1:1.0: 4 ports detected
[ 3.701356] input: HID 04b4:4042 Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.5/3-1.5.2/3-1.5.2:1.1/0003:04B4:4042.0006/input/input21
[ 3.703144] input: HID 04b4:4042 as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.5/3-1.5.2/3-1.5.2:1.1/0003:04B4:4042.0006/input/input22
[ 3.704886] input: HID 04b4:4042 Keyboard as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.5/3-1.5.2/3-1.5.2:1.1/0003:04B4:4042.0006/input/input23
[ 3.706702] hid-generic 0003:04B4:4042.0006: input,hiddev1,hidraw3: USB HID v1.11 Mouse [HID 04b4:4042] on usb-0000:00:1d.0-1.5.2/input1
[ 3.760088] usb 3-1.5.3.3: New USB device found, idVendor=056d, idProduct=0002, bcdDevice=75.30
[ 3.762589] usb 3-1.5.3.3: New USB device strings: Mfr=4, Product=14, SerialNumber=0
[ 3.765050] usb 3-1.5.3.3: Product: EIZO USB HID Monitor
[ 3.767478] usb 3-1.5.3.3: Manufacturer: EIZO
[ 3.777302] raid6: sse2x4 gen() 16127 MB/s
[ 3.845301] raid6: sse2x4 xor() 8181 MB/s
[ 3.913300] raid6: sse2x2 gen() 10981 MB/s
[ 3.977304] usb 3-1.5.6.1.2: new full-speed USB device number 10 using ehci-pci
[ 3.981301] raid6: sse2x2 xor() 9995 MB/s
[ 4.049302] raid6: sse2x1 gen() 15197 MB/s
[ 4.072265] hid-generic 0003:056D:0002.0007: hiddev2,hidraw4: USB HID v1.10 Device [EIZO EIZO USB HID Monitor] on usb-0000:00:1d.0-1.5.3.3/input0
[ 4.103576] usb 3-1.5.6.1.2: New USB device found, idVendor=067b, idProduct=2305, bcdDevice= 2.02
[ 4.105993] usb 3-1.5.6.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.108378] usb 3-1.5.6.1.2: Product: IEEE-1284 Controller
[ 4.110781] usb 3-1.5.6.1.2: Manufacturer: Prolific Technology Inc.
[ 4.117302] raid6: sse2x1 xor() 7312 MB/s
[ 4.118798] raid6: using algorithm sse2x4 gen() 16127 MB/s
[ 4.120287] raid6: .... xor() 8181 MB/s, rmw enabled
[ 4.121844] raid6: using ssse3x2 recovery algorithm
[ 4.124291] xor: automatically using best checksumming function avx
[ 4.127287] async_tx: api initialized (async)
[ 4.201398] usb 3-1.5.6.1.3: new full-speed USB device number 11 using ehci-pci
[ 4.330937] usb 3-1.5.6.1.3: New USB device found, idVendor=067b, idProduct=2303, bcdDevice= 4.00
[ 4.334658] usb 3-1.5.6.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.338174] usb 3-1.5.6.1.3: Product: USB-Serial Controller D
[ 4.341623] usb 3-1.5.6.1.3: Manufacturer: Prolific Technology Inc.
[ 4.352581] device-mapper: uevent: version 1.0.3
[ 4.354132] device-mapper: ioctl: 4.42.0-ioctl (2020-02-27) initialised: dm-devel@redhat.com
[ 10.646423] process '/usr/bin/fstype' started with executable stack
[ 10.974306] PM: Image not found (code -22)
[ 10.980260] PM: hibernation: Marking nosave pages: [mem 0x00000000-0x00000fff]
[ 10.980263] PM: hibernation: Marking nosave pages: [mem 0x0009f000-0x000fffff]
[ 10.980268] PM: hibernation: Marking nosave pages: [mem 0x7ff29000-0xffffffff]
[ 10.982925] PM: hibernation: Basic memory bitmaps created
[ 10.983933] PM: hibernation: Basic memory bitmaps freed
[ 10.984592] video LNXVIDEO:00: Restoring backlight state
[ 11.099829] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[ 11.175789] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[ 11.361797] systemd[1]: Inserted module 'autofs4'
[ 11.386405] systemd[1]: systemd 245.5-2 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 11.409592] systemd[1]: Detected architecture x86-64.
[ 11.441411] systemd[1]: Set hostname to <TP-T430s>.
[ 11.573621] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
[ 11.600069] systemd[1]: /lib/systemd/system/thinkfan.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/thinkfan.pid → /run/thinkfan.pid; please update the unit file accordingly.
[ 11.602710] systemd[1]: /etc/systemd/system/teamviewerd.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/teamviewerd.pid → /run/teamviewerd.pid; please update the unit file accordingly.
[ 11.626657] systemd[1]: /lib/systemd/system/fancontrol.service:11: PIDFile= references a path below legacy directory /var/run/, updating /var/run/fancontrol.pid → /run/fancontrol.pid; please update the unit file accordingly.
[ 11.630065] systemd[1]: /lib/systemd/system/docker.socket:6: ListenStream= references a path below legacy directory /var/run/, updating /var/run/docker.sock → /run/docker.sock; please update the unit file accordingly.
[ 11.669643] systemd[1]: Created slice system-getty.slice.
[ 11.671757] systemd[1]: Created slice system-modprobe.slice.
[ 11.678464] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ 11.686359] systemd[1]: Created slice Cryptsetup Units Slice.
[ 11.693758] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 11.698479] systemd[1]: Created slice system-tor.slice.
[ 11.702076] systemd[1]: Created slice User and Session Slice.
[ 11.705493] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 11.709167] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 11.712668] systemd[1]: Reached target User and Group Name Lookups.
[ 11.716346] systemd[1]: Reached target Remote File Systems.
[ 11.717985] systemd[1]: Reached target Slices.
[ 11.721613] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 11.725215] systemd[1]: Listening on LVM2 poll daemon socket.
[ 11.728820] systemd[1]: Listening on Syslog Socket.
[ 11.732440] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 11.735977] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 11.739619] systemd[1]: Listening on Journal Audit Socket.
[ 11.743138] systemd[1]: Listening on Journal Socket (/dev/log).
[ 11.746732] systemd[1]: Listening on Journal Socket.
[ 11.750292] systemd[1]: Listening on udev Control Socket.
[ 11.753804] systemd[1]: Listening on udev Kernel Socket.
[ 11.758086] systemd[1]: Mounting Huge Pages File System...
[ 11.761807] systemd[1]: Mounting POSIX Message Queue File System...
[ 11.765513] systemd[1]: Mounting Kernel Debug File System...
[ 11.769062] systemd[1]: Mounting Kernel Trace File System...
[ 11.773215] systemd[1]: Starting Availability of block devices...
[ 11.776865] systemd[1]: Starting Set the console keyboard layout...
[ 11.780668] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 11.784421] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ 11.788379] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
[ 11.789180] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 11.792541] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 11.793876] systemd[1]: Starting Journal Service...
[ 11.801586] systemd[1]: Starting Load Kernel Modules...
[ 11.806017] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 11.810708] systemd[1]: Starting udev Coldplug all Devices...
[ 11.815905] systemd[1]: Mounted Huge Pages File System.
[ 11.818098] systemd[1]: Mounted POSIX Message Queue File System.
[ 11.820229] systemd[1]: Mounted Kernel Debug File System.
[ 11.822523] systemd[1]: Mounted Kernel Trace File System.
[ 11.827019] systemd[1]: Finished Availability of block devices.
[ 11.828329] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro
[ 11.833646] systemd[1]: Finished Set the console keyboard layout.
[ 11.836995] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 11.842238] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 11.847668] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 11.847707] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[ 11.848751] systemd[1]: Starting Load/Save Random Seed...
[ 11.855205] systemd[1]: Starting Create System Users...
[ 11.866880] systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
[ 11.871762] systemd[1]: Finished Load/Save Random Seed.
[ 11.884071] systemd[1]: Finished Create System Users.
[ 11.886469] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 11.914936] systemd[1]: Finished Create Static Device Nodes in /dev.
[ 11.916516] systemd[1]: Reached target Local File Systems (Pre).
[ 11.919189] systemd[1]: Condition check resulted in Virtual Machine and Container Storage (Compatibility) being skipped.
[ 11.920571] systemd[1]: Reached target Containers.
[ 11.923323] systemd[1]: Starting udev Kernel Device Manager...
[ 11.954082] systemd[1]: Finished udev Coldplug all Devices.
[ 11.956816] systemd[1]: Starting Helper to synchronize boot up for ifupdown...
[ 11.963298] systemd[1]: Finished Helper to synchronize boot up for ifupdown.
[ 12.005472] loop: module loaded
[ 12.019132] lp: driver loaded but no devices found
[ 12.024006] ppdev: user-space parallel port driver
[ 12.032542] systemd[1]: Finished Load Kernel Modules.
[ 12.034919] systemd[1]: Condition check resulted in FUSE Control File System being skipped.
[ 12.035009] systemd[1]: Condition check resulted in Kernel Configuration File System being skipped.
[ 12.036030] systemd[1]: Starting Apply Kernel Variables...
[ 12.042359] systemd[1]: Started udev Kernel Device Manager.
[ 12.047221] systemd[1]: Starting Show Plymouth Boot Screen...
[ 12.050719] systemd[1]: Finished Apply Kernel Variables.
[ 12.080164] systemd[1]: Started Show Plymouth Boot Screen.
[ 12.082318] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch being skipped.
[ 12.082430] systemd[1]: Started Forward Password Requests to Plymouth Directory Watch.
[ 12.199275] systemd[1]: Created slice system-systemd\x2dbacklight.slice.
[ 12.204386] systemd[1]: Starting Load/Save Screen Backlight Brightness of backlight:acpi_video0...
[ 12.215884] systemd[1]: Started Journal Service.
[ 12.229856] systemd-journald[473]: Received client request to flush runtime journal.
[ 12.250871] ACPI: AC Adapter [AC] (on-line)
[ 12.325521] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 12.328876] iTCO_vendor_support: vendor-support=0
[ 12.329531] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 12.339844] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 12.341940] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560)
[ 12.347374] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 12.347534] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 12.351870] tpm_tis 00:06: 1.2 TPM (device-id 0x0, rev-id 78)
[ 12.411098] input: PC Speaker as /devices/platform/pcspkr/input/input24
[ 12.414928] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 12.416944] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 12.419003] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 12.421063] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ 12.443575] Non-volatile memory driver v1.3
[ 12.457421] thinkpad_acpi: ThinkPad ACPI Extras v0.26
[ 12.459301] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 12.461232] thinkpad_acpi: ThinkPad BIOS CBET4000 4.11-2601-gd9b2f7971a, EC G7HT39WW-3.22
[ 12.463173] thinkpad_acpi: Lenovo ThinkPad T430s, model 23532NU
[ 12.508762] thinkpad_acpi: radio switch found; radios are enabled
[ 12.510893] thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode
[ 12.512746] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 12.514643] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 12.518959] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 12.521122] cfg80211: Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf'
[ 12.523043] cfg80211: Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
[ 12.525186] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 12.529241] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[ 12.533351] thinkpad_acpi: rfkill switch tpacpi_wwan_sw: radio is unblocked
[ 12.539582] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 12.541562] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 12.546130] platform regulatory.0: firmware: direct-loading firmware regulatory.db
[ 12.548452] platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s
[ 12.569969] thinkpad_acpi: battery 1 registered (start 0, stop 100)
[ 12.569977] battery: new extension: ThinkPad Battery Extension
[ 12.591096] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input25
[ 12.621020] wl: loading out-of-tree module taints kernel.
[ 12.623038] wl: module license 'MIXED/Proprietary' taints kernel.
[ 12.625010] Disabling lock debugging due to kernel taint
[ 12.643301] wl: module verification failed: signature and/or required key missing - tainting kernel
[ 12.705609] wlan0: Broadcom BCM43a0 802.11 Hybrid Wireless Controller 6.30.223.271 (r587334)
[ 12.750292] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 12.790882] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 12.792948] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 12.795054] snd_hda_codec_realtek hdaudioC0D0: hp_outs=2 (0x15/0x1b/0x0/0x0/0x0)
[ 12.797186] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 12.799263] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 12.802534] Adding 16699388k swap on /dev/mapper/TP--T430s--vg-swap_1. Priority:-2 extents:1 across:16699388k SSFS
[ 12.802668] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 12.806642] snd_hda_codec_realtek hdaudioC0D0: Dock Mic=0x19
[ 12.808714] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 12.843738] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input26
[ 12.845832] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input27
[ 12.850147] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input28
[ 12.854273] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input29
[ 12.856511] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input30
[ 12.860822] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input31
[ 12.862916] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input32
[ 12.864984] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input33
[ 12.882842] intel_rapl_common: Found RAPL domain package
[ 12.884241] wl 0000:01:00.0 wlp1s0: renamed from wlan0
[ 12.884788] intel_rapl_common: Found RAPL domain core
[ 12.888471] intel_rapl_common: Found RAPL domain uncore
[ 13.063519] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[ 13.069960] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[ 13.071436] ext2 filesystem being mounted at /boot supports timestamps until 2038 (0x7fffffff)
[ 13.136024] audit: type=1400 audit(1588701470.369:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1099 comm="apparmor_parser"
[ 13.138005] audit: type=1400 audit(1588701470.369:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1099 comm="apparmor_parser"
[ 13.138008] audit: type=1400 audit(1588701470.369:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1099 comm="apparmor_parser"
[ 13.139720] audit: type=1400 audit(1588701470.373:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=1097 comm="apparmor_parser"
[ 13.143880] audit: type=1400 audit(1588701470.377:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="unreal" pid=1098 comm="apparmor_parser"
[ 13.145065] audit: type=1400 audit(1588701470.377:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/mysqld" pid=1100 comm="apparmor_parser"
[ 13.159095] audit: type=1400 audit(1588701470.393:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="system_tor" pid=1103 comm="apparmor_parser"
[ 13.164229] audit: type=1400 audit(1588701470.397:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ioquake3" pid=1104 comm="apparmor_parser"
[ 13.166294] audit: type=1400 audit(1588701470.397:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ioquake3//popup" pid=1104 comm="apparmor_parser"
[ 13.168346] audit: type=1400 audit(1588701470.401:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ut99" pid=1106 comm="apparmor_parser"
[ 13.281586] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 13.525375] Process accounting resumed
[ 13.531236] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input34
[ 13.987474] logitech-hidpp-device 0003:046D:1028.0004: HID++ 1.0 device connected.
[ 14.069923] vboxdrv: Found 4 processor cores
[ 14.101230] vboxdrv: TSC mode is Invariant, tentative frequency 2893431705 Hz
[ 14.102614] vboxdrv: Successfully loaded version 6.1.6 (interface 0x002d0001)
[ 14.318222] VBoxNetFlt: Successfully started.
[ 14.332443] VBoxNetAdp: Successfully started.
[ 14.670754] mc: Linux media interface: v0.10
[ 14.691440] videodev: Linux video capture interface: v2.00
[ 14.793943] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:02d5)
[ 14.801324] uvcvideo 1-1.6:1.0: Entity type for entity Extension 4 was not initialized!
[ 14.802832] uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized!
[ 14.804324] uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized!
[ 14.805873] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized!
[ 14.809356] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input35
[ 14.811083] usbcore: registered new interface driver uvcvideo
[ 14.812572] USB Video Class driver (1.1.1)
[ 14.932343] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[ 14.998099] Bluetooth: Core ver 2.22
[ 14.999960] NET: Registered protocol family 31
[ 15.001029] Bluetooth: HCI device and connection manager initialized
[ 15.010594] Bluetooth: HCI socket layer initialized
[ 15.016642] Bluetooth: L2CAP socket layer initialized
[ 15.018550] Bluetooth: SCO socket layer initialized
[ 15.043716] usbcore: registered new interface driver btusb
[ 15.160197] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 15.161648] Bluetooth: BNEP filters: protocol multicast
[ 15.163096] Bluetooth: BNEP socket layer initialized
[ 15.167291] Bluetooth: hci0: BCM: chip id 63
[ 15.170298] Bluetooth: hci0: BCM: features 0x07
[ 15.187292] Bluetooth: hci0: BCM20702A
[ 15.189284] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000
[ 15.194802] bluetooth hci0: firmware: direct-loading firmware brcm/BCM20702A1-0a5c-21e6.hcd
[ 15.630644] fuse: init (API version 7.31)
[ 16.075274] Bluetooth: hci0: BCM20702A1 (001.002.014) build 1669
[ 16.091291] Bluetooth: hci0: Broadcom Bluetooth Device
[ 16.317341] Bluetooth: RFCOMM TTY layer initialized
[ 16.317351] Bluetooth: RFCOMM socket layer initialized
[ 16.317358] Bluetooth: RFCOMM ver 1.11
[ 17.070657] usbcore: registered new interface driver usbserial_generic
[ 17.070669] usbserial: USB Serial support registered for generic
[ 17.074554] usbcore: registered new interface driver pl2303
[ 17.074566] usbserial: USB Serial support registered for pl2303
[ 17.074597] pl2303 3-1.5.6.1.3:1.0: pl2303 converter detected
[ 17.078850] usb 3-1.5.6.1.3: pl2303 converter now attached to ttyUSB0
[ 17.139356] usblp 3-1.5.6.1.2:1.0: usblp3: USB Bidirectional printer dev 10 if 0 alt 1 proto 2 vid 0x067B pid 0x2305
[ 17.139389] usbcore: registered new interface driver usblp
[ 18.949958] rfkill: input handler disabled
[ 19.995061] e1000e 0000:00:19.0 eno0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[ 19.995114] IPv6: ADDRCONF(NETDEV_CHANGE): eno0: link becomes ready
[ 24.807221] e1000e 0000:00:19.0 eno0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[ 37.936571] kauditd_printk_skb: 31 callbacks suppressed
[ 37.936573] audit: type=1400 audit(1588701495.169:43): apparmor="DENIED" operation="open" profile="/usr/bin/freshclam" name="/run/systemd/userdb/" pid=2667 comm="freshclam" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[ 38.427233] audit: type=1400 audit(1588701495.661:44): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=3052 comm="apparmor_parser"
[ 38.620323] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 38.623365] Bridge firewalling registered
[ 38.838163] Initializing XFRM netlink socket
[ 105.666767] rfkill: input handler enabled
[ 109.109073] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
[ 109.276872] audit: type=1400 audit(1588701566.345:45): apparmor="DENIED" operation="open" profile="/usr/lib/telepathy/telepathy-*" name="/sys/devices/system/node/" pid=3736 comm="telepathy-haze" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 109.864738] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 110.137754] rfkill: input handler disabled