| [ 0.000000] Linux version 5.3.0-2-amd64 (debian-kernel@lists.debian.org) (gcc version 9.2.1 20191109 (Debian 9.2.1-19)) #1 SMP Debian 5.3.9-3 (2019-11-19) |
| [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-5.3.0-2-amd64 root=/dev/mapper/TP--T430s--vg-root ro iomem=relaxed |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' |
| [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 |
| [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. |
| [ 0.000000] BIOS-provided physical RAM map: |
| [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ff24fff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000007ff25000-0x00000000829fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000047b5fffff] usable |
| [ 0.000000] NX (Execute Disable) protection: active |
| [ 0.000000] SMBIOS 2.8 present. |
| [ 0.000000] DMI: LENOVO 23532NU/23532NU, BIOS CBET4000 4.11-165-gc2a05d143b 11/28/2019 |
| [ 0.000000] tsc: Fast TSC calibration using PIT |
| [ 0.000000] tsc: Detected 2893.615 MHz processor |
| [ 0.002030] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| [ 0.002031] e820: remove [mem 0x000a0000-0x000fffff] usable |
| [ 0.002035] last_pfn = 0x47b600 max_arch_pfn = 0x400000000 |
| [ 0.002039] MTRR default type: write-back |
| [ 0.002039] MTRR fixed ranges enabled: |
| [ 0.002040] 00000-9FFFF write-back |
| [ 0.002041] A0000-BFFFF uncachable |
| [ 0.002042] C0000-FFFFF write-back |
| [ 0.002042] MTRR variable ranges enabled: |
| [ 0.002044] 0 base 080000000 mask FC0000000 uncachable |
| [ 0.002044] 1 base 0C0000000 mask FF0000000 uncachable |
| [ 0.002045] 2 base 0D0000000 mask FF0000000 write-combining |
| [ 0.002046] 3 base 0E0000000 mask FE0000000 uncachable |
| [ 0.002046] 4 disabled |
| [ 0.002047] 5 disabled |
| [ 0.002047] 6 disabled |
| [ 0.002047] 7 disabled |
| [ 0.002048] 8 disabled |
| [ 0.002048] 9 disabled |
| [ 0.002324] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT |
| [ 0.002678] last_pfn = 0x7ff25 max_arch_pfn = 0x400000000 |
| [ 0.012050] BRK [0x276e01000, 0x276e01fff] PGTABLE |
| [ 0.012052] BRK [0x276e02000, 0x276e02fff] PGTABLE |
| [ 0.012053] BRK [0x276e03000, 0x276e03fff] PGTABLE |
| [ 0.012086] BRK [0x276e04000, 0x276e04fff] PGTABLE |
| [ 0.012088] BRK [0x276e05000, 0x276e05fff] PGTABLE |
| [ 0.012198] BRK [0x276e06000, 0x276e06fff] PGTABLE |
| [ 0.012227] BRK [0x276e07000, 0x276e07fff] PGTABLE |
| [ 0.012415] RAMDISK: [mem 0x30db9000-0x346d3fff] |
| [ 0.012421] ACPI: Early table checksum verification disabled |
| [ 0.012424] ACPI: RSDP 0x00000000000F6750 000024 (v02 COREv4) |
| [ 0.012427] ACPI: XSDT 0x000000007FF4B0E0 00005C (v01 COREv4 COREBOOT 00000000 CORE 20190703) |
| [ 0.012432] ACPI: FACP 0x000000007FF4EC40 0000F4 (v04 COREv4 COREBOOT 00000000 CORE 20190703) |
| [ 0.012436] ACPI: DSDT 0x000000007FF4B280 0039C0 (v02 COREv4 COREBOOT 20110725 INTL 20190703) |
| [ 0.012439] ACPI: FACS 0x000000007FF4B240 000040 |
| [ 0.012441] ACPI: FACS 0x000000007FF4B240 000040 |
| [ 0.012443] ACPI: SSDT 0x000000007FF4ED40 001B03 (v02 COREv4 COREBOOT 0000002A CORE 20190703) |
| [ 0.012446] ACPI: MCFG 0x000000007FF50850 00003C (v01 COREv4 COREBOOT 00000000 CORE 20190703) |
| [ 0.012448] ACPI: TCPA 0x000000007FF50890 000032 (v02 COREv4 COREBOOT 00000000 CORE 20190703) |
| [ 0.012451] ACPI: APIC 0x000000007FF508D0 00006C (v02 COREv4 COREBOOT 00000000 CORE 20190703) |
| [ 0.012453] ACPI: DMAR 0x000000007FF50940 0000D0 (v01 COREv4 COREBOOT 00000000 CORE 20190703) |
| [ 0.012456] ACPI: HPET 0x000000007FF52A10 000038 (v01 COREv4 COREBOOT 00000000 CORE 20190703) |
| [ 0.012463] ACPI: Local APIC address 0xfee00000 |
| [ 0.012534] No NUMA configuration found |
| [ 0.012535] Faking a node at [mem 0x0000000000000000-0x000000047b5fffff] |
| [ 0.012539] NODE_DATA(0) allocated [mem 0x47b5ee000-0x47b5f2fff] |
| [ 0.012568] Zone ranges: |
| [ 0.012569] DMA [mem 0x0000000000001000-0x0000000000ffffff] |
| [ 0.012570] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] |
| [ 0.012571] Normal [mem 0x0000000100000000-0x000000047b5fffff] |
| [ 0.012572] Device empty |
| [ 0.012573] Movable zone start for each node |
| [ 0.012574] Early memory node ranges |
| [ 0.012574] node 0: [mem 0x0000000000001000-0x000000000009efff] |
| [ 0.012576] node 0: [mem 0x0000000000100000-0x000000007ff24fff] |
| [ 0.012577] node 0: [mem 0x0000000100000000-0x000000047b5fffff] |
| [ 0.012587] Zeroed struct page in unavailable ranges: 317 pages |
| [ 0.012588] Initmem setup node 0 [mem 0x0000000000001000-0x000000047b5fffff] |
| [ 0.012589] On node 0 totalpages: 4175043 |
| [ 0.012590] DMA zone: 64 pages used for memmap |
| [ 0.012591] DMA zone: 21 pages reserved |
| [ 0.012591] DMA zone: 3998 pages, LIFO batch:0 |
| [ 0.012640] DMA32 zone: 8125 pages used for memmap |
| [ 0.012641] DMA32 zone: 519973 pages, LIFO batch:63 |
| [ 0.020735] Normal zone: 57048 pages used for memmap |
| [ 0.020736] Normal zone: 3651072 pages, LIFO batch:63 |
| [ 0.061960] Reserving Intel graphics memory at [mem 0x80a00000-0x829fffff] |
| [ 0.062351] ACPI: PM-Timer IO Port: 0x508 |
| [ 0.062354] ACPI: Local APIC address 0xfee00000 |
| [ 0.062369] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 |
| [ 0.062371] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) |
| [ 0.062373] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) |
| [ 0.062374] ACPI: IRQ0 used by override. |
| [ 0.062375] ACPI: IRQ9 used by override. |
| [ 0.062377] Using ACPI (MADT) for SMP configuration information |
| [ 0.062378] ACPI: HPET id: 0x8086a701 base: 0xfed00000 |
| [ 0.062383] smpboot: Allowing 4 CPUs, 0 hotplug CPUs |
| [ 0.062392] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] |
| [ 0.062393] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] |
| [ 0.062394] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] |
| [ 0.062395] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] |
| [ 0.062396] PM: Registered nosave memory: [mem 0x7ff25000-0x829fffff] |
| [ 0.062397] PM: Registered nosave memory: [mem 0x82a00000-0xefffffff] |
| [ 0.062398] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff] |
| [ 0.062399] PM: Registered nosave memory: [mem 0xf4000000-0xfed3ffff] |
| [ 0.062399] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff] |
| [ 0.062400] PM: Registered nosave memory: [mem 0xfed45000-0xfed8ffff] |
| [ 0.062401] PM: Registered nosave memory: [mem 0xfed90000-0xfed91fff] |
| [ 0.062401] PM: Registered nosave memory: [mem 0xfed92000-0xffffffff] |
| [ 0.062403] [mem 0x82a00000-0xefffffff] available for PCI devices |
| [ 0.062404] Booting paravirtualized kernel on bare hardware |
| [ 0.062407] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns |
| [ 0.146610] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 |
| [ 0.146789] percpu: Embedded 53 pages/cpu s178200 r8192 d30696 u524288 |
| [ 0.146796] pcpu-alloc: s178200 r8192 d30696 u524288 alloc=1*2097152 |
| [ 0.146797] pcpu-alloc: [0] 0 1 2 3 |
| [ 0.146816] Built 1 zonelists, mobility grouping on. Total pages: 4109785 |
| [ 0.146817] Policy zone: Normal |
| [ 0.146818] Kernel command line: BOOT_IMAGE=/vmlinuz-5.3.0-2-amd64 root=/dev/mapper/TP--T430s--vg-root ro iomem=relaxed |
| [ 0.147607] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) |
| [ 0.147981] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) |
| [ 0.148027] mem auto-init: stack:off, heap alloc:off, heap free:off |
| [ 0.151028] Calgary: detecting Calgary via BIOS EBDA area |
| [ 0.151033] Calgary: Unable to locate Rio Grande table in EBDA - bailing! |
| [ 0.189408] Memory: 16263232K/16700172K available (10243K kernel code, 1197K rwdata, 3560K rodata, 1660K init, 2096K bss, 436940K reserved, 0K cma-reserved) |
| [ 0.189511] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 |
| [ 0.189521] Kernel/User page tables isolation: enabled |
| [ 0.189534] ftrace: allocating 33166 entries in 130 pages |
| [ 0.200981] rcu: Hierarchical RCU implementation. |
| [ 0.200983] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4. |
| [ 0.200984] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. |
| [ 0.200985] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 |
| [ 0.204008] NR_IRQS: 33024, nr_irqs: 456, preallocated irqs: 16 |
| [ 0.204218] random: crng done (trusting CPU's manufacturer) |
| [ 0.205795] Console: colour VGA+ 80x25 |
| [ 0.211312] printk: console [tty0] enabled |
| [ 0.211383] ACPI: Core revision 20190703 |
| [ 0.211502] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns |
| [ 0.211587] APIC: Switch to symmetric I/O mode setup |
| [ 0.211644] DMAR: Host address width 36 |
| [ 0.211699] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 |
| [ 0.211760] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a |
| [ 0.211828] DMAR: RMRR base: 0x00000080800000 end: 0x000000829fffff |
| [ 0.211887] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 |
| [ 0.211947] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a |
| [ 0.212017] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 |
| [ 0.212076] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 |
| [ 0.212133] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. |
| [ 0.212599] DMAR-IR: Enabled IRQ remapping in x2apic mode |
| [ 0.212655] x2apic enabled |
| [ 0.212715] Switched APIC routing to cluster x2apic. |
| [ 0.213204] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 |
| [ 0.231586] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x29b5b32a770, max_idle_ns: 440795268308 ns |
| [ 0.231661] Calibrating delay loop (skipped), value calculated using timer frequency.. 5787.23 BogoMIPS (lpj=11574460) |
| [ 0.231736] pid_max: default: 32768 minimum: 301 |
| [ 0.231815] LSM: Security Framework initializing |
| [ 0.231875] Yama: disabled by default; enable with sysctl kernel.yama.* |
| [ 0.231949] AppArmor: AppArmor initialized |
| [ 0.232006] TOMOYO Linux initialized |
| [ 0.232099] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) |
| [ 0.232193] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) |
| [ 0.232479] mce: CPU0: Thermal monitoring enabled (TM1) |
| [ 0.232543] process: using mwait in idle threads |
| [ 0.232599] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 |
| [ 0.232655] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 |
| [ 0.232715] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization |
| [ 0.232786] Spectre V2 : Mitigation: Full generic retpoline |
| [ 0.232844] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch |
| [ 0.232910] Spectre V2 : Enabling Restricted Speculation for firmware calls |
| [ 0.232971] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier |
| [ 0.233041] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl |
| [ 0.233100] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp |
| [ 0.233175] MDS: Mitigation: Clear CPU buffers |
| [ 0.233380] Freeing SMP alternatives memory: 24K |
| [ 0.235018] TSC deadline timer enabled |
| [ 0.235021] smpboot: CPU0: Intel(R) Core(TM) i7-3520M CPU @ 2.90GHz (family: 0x6, model: 0x3a, stepping: 0x9) |
| [ 0.235192] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. |
| [ 0.235268] ... version: 3 |
| [ 0.235323] ... bit width: 48 |
| [ 0.235378] ... generic registers: 4 |
| [ 0.235434] ... value mask: 0000ffffffffffff |
| [ 0.235492] ... max period: 00007fffffffffff |
| [ 0.235549] ... fixed-purpose events: 3 |
| [ 0.235602] ... event mask: 000000070000000f |
| [ 0.235658] rcu: Hierarchical SRCU implementation. |
| [ 0.235658] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. |
| [ 0.235658] smp: Bringing up secondary CPUs ... |
| [ 0.235658] x86: Booting SMP configuration: |
| [ 0.235658] .... node #0, CPUs: #1 |
| [ 0.235738] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. |
| [ 0.235908] #2 #3 |
| [ 0.241729] smp: Brought up 1 node, 4 CPUs |
| [ 0.241729] smpboot: Max logical packages: 1 |
| [ 0.241729] smpboot: Total of 4 processors activated (23148.92 BogoMIPS) |
| [ 0.241729] devtmpfs: initialized |
| [ 0.241729] x86/mm: Memory block size: 128MB |
| [ 0.244971] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns |
| [ 0.244971] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) |
| [ 0.244971] pinctrl core: initialized pinctrl subsystem |
| [ 0.244971] NET: Registered protocol family 16 |
| [ 0.244971] audit: initializing netlink subsys (disabled) |
| [ 0.244971] audit: type=2000 audit(1574944593.032:1): state=initialized audit_enabled=0 res=1 |
| [ 0.244971] cpuidle: using governor ladder |
| [ 0.244971] cpuidle: using governor menu |
| [ 0.244971] ACPI: bus type PCI registered |
| [ 0.244971] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 |
| [ 0.245268] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) |
| [ 0.245340] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 |
| [ 0.245405] PCI: Using configuration type 1 for base access |
| [ 0.245480] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on |
| [ 0.248378] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages |
| [ 0.395705] alg: No test for lzo-rle (lzo-rle-generic) |
| [ 0.395723] alg: No test for lzo-rle (lzo-rle-scomp) |
| [ 0.395727] ACPI: Added _OSI(Module Device) |
| [ 0.395783] ACPI: Added _OSI(Processor Device) |
| [ 0.395839] ACPI: Added _OSI(3.0 _SCP Extensions) |
| [ 0.395895] ACPI: Added _OSI(Processor Aggregator Device) |
| [ 0.395953] ACPI: Added _OSI(Linux-Dell-Video) |
| [ 0.396007] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) |
| [ 0.396065] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) |
| [ 0.398109] ACPI: 2 ACPI AML tables successfully acquired and loaded |
| [ 0.398837] ACPI: EC: EC started |
| [ 0.398893] ACPI: EC: interrupt blocked |
| [ 0.399746] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC |
| [ 0.399803] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62 |
| [ 0.399871] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC used to handle transactions |
| [ 0.399941] ACPI: Interpreter enabled |
| [ 0.400011] ACPI: (supports S0 S3 S4 S5) |
| [ 0.400066] ACPI: Using IOAPIC for interrupt routing |
| [ 0.400136] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| [ 0.400319] ACPI: Enabled 1 GPEs in block 00 to 3F |
| [ 0.403516] ACPI: Power Resource [FPWR] (off) |
| [ 0.403826] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) |
| [ 0.403889] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] |
| [ 0.403995] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] |
| [ 0.404074] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge |
| [ 0.404186] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff window] (conflicts with Video ROM [mem 0x000c0000-0x000cf1ff]) |
| [ 0.404263] acpi PNP0A08:00: ignoring host bridge window [mem 0x000d0000-0x000d3fff window] (conflicts with Adapter ROM [mem 0x000cf800-0x000d05ff]) |
| [ 0.404467] PCI host bridge to bus 0000:00 |
| [ 0.404522] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] |
| [ 0.404581] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] |
| [ 0.404640] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] |
| [ 0.404709] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] |
| [ 0.404778] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] |
| [ 0.404847] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] |
| [ 0.404914] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] |
| [ 0.404981] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] |
| [ 0.405048] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] |
| [ 0.405115] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] |
| [ 0.405184] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] |
| [ 0.405254] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window] |
| [ 0.405322] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window] |
| [ 0.405392] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window] |
| [ 0.405460] pci_bus 0000:00: root bus resource [mem 0x82a00000-0xefffffff window] |
| [ 0.405528] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] |
| [ 0.405597] pci_bus 0000:00: root bus resource [bus 00-ff] |
| [ 0.405660] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000 |
| [ 0.405792] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000 |
| [ 0.405859] pci 0000:00:02.0: reg 0x10: [mem 0xe2400000-0xe27fffff 64bit] |
| [ 0.405921] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref] |
| [ 0.405994] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f] |
| [ 0.406110] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000 |
| [ 0.406174] pci 0000:00:04.0: reg 0x10: [mem 0xe2b30000-0xe2b37fff 64bit] |
| [ 0.406315] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330 |
| [ 0.406395] pci 0000:00:14.0: reg 0x10: [mem 0xe2b20000-0xe2b2ffff 64bit] |
| [ 0.406518] pci 0000:00:14.0: PME# supported from D3hot D3cold |
| [ 0.406642] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000 |
| [ 0.406717] pci 0000:00:19.0: reg 0x10: [mem 0xe2b00000-0xe2b1ffff] |
| [ 0.406779] pci 0000:00:19.0: reg 0x14: [mem 0xe2b3c000-0xe2b3cfff] |
| [ 0.406844] pci 0000:00:19.0: reg 0x18: [io 0x4040-0x405f] |
| [ 0.406955] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold |
| [ 0.407071] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 |
| [ 0.407149] pci 0000:00:1a.0: reg 0x10: [mem 0xe2b3f000-0xe2b3f3ff] |
| [ 0.407286] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold |
| [ 0.407408] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300 |
| [ 0.407486] pci 0000:00:1b.0: reg 0x10: [mem 0xe2b38000-0xe2b3bfff 64bit] |
| [ 0.407615] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold |
| [ 0.407758] pci 0000:00:1c.0: [8086:1e12] type 01 class 0x060400 |
| [ 0.407969] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold |
| [ 0.408056] pci 0000:00:1c.0: Enabling MPC IRBNCE |
| [ 0.408113] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled |
| [ 0.408246] pci 0000:00:1c.1: [8086:1e14] type 01 class 0x060400 |
| [ 0.408479] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold |
| [ 0.408563] pci 0000:00:1c.1: Enabling MPC IRBNCE |
| [ 0.408618] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled |
| [ 0.408748] pci 0000:00:1c.2: [8086:1e18] type 01 class 0x060400 |
| [ 0.408977] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold |
| [ 0.409060] pci 0000:00:1c.2: Enabling MPC IRBNCE |
| [ 0.409119] pci 0000:00:1c.2: Intel PCH root port ACS workaround enabled |
| [ 0.409249] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 |
| [ 0.409327] pci 0000:00:1d.0: reg 0x10: [mem 0xe2b40000-0xe2b403ff] |
| [ 0.409464] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold |
| [ 0.409587] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100 |
| [ 0.409802] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601 |
| [ 0.409879] pci 0000:00:1f.2: reg 0x10: [io 0x4080-0x4087] |
| [ 0.409944] pci 0000:00:1f.2: reg 0x14: [io 0x4090-0x4093] |
| [ 0.410006] pci 0000:00:1f.2: reg 0x18: [io 0x4088-0x408f] |
| [ 0.410068] pci 0000:00:1f.2: reg 0x1c: [io 0x4094-0x4097] |
| [ 0.410131] pci 0000:00:1f.2: reg 0x20: [io 0x4060-0x407f] |
| [ 0.410195] pci 0000:00:1f.2: reg 0x24: [mem 0xe2b3e000-0xe2b3e7ff] |
| [ 0.410294] pci 0000:00:1f.2: PME# supported from D3hot |
| [ 0.410408] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500 |
| [ 0.410482] pci 0000:00:1f.3: reg 0x10: [mem 0xe2b41000-0xe2b410ff 64bit] |
| [ 0.410558] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f] |
| [ 0.410686] pci 0000:00:1f.6: [8086:1e24] type 00 class 0x118000 |
| [ 0.410766] pci 0000:00:1f.6: reg 0x10: [mem 0xe2b3d000-0xe2b3dfff 64bit] |
| [ 0.411041] pci 0000:01:00.0: [14e4:43a0] type 00 class 0x028000 |
| [ 0.411193] pci 0000:01:00.0: reg 0x10: [mem 0xe2a00000-0xe2a07fff 64bit] |
| [ 0.411310] pci 0000:01:00.0: reg 0x18: [mem 0xe2800000-0xe29fffff 64bit] |
| [ 0.411619] pci 0000:01:00.0: supports D1 D2 |
| [ 0.411663] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.411992] pci 0000:00:1c.0: PCI bridge to [bus 01] |
| [ 0.412056] pci 0000:00:1c.0: bridge window [mem 0xe2800000-0xe2afffff] |
| [ 0.412407] pci 0000:02:00.0: [1180:e822] type 00 class 0x080500 |
| [ 0.412702] pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz. |
| [ 0.413005] pci 0000:02:00.0: reg 0x10: [mem 0xe0800000-0xe08000ff] |
| [ 0.413563] pci 0000:02:00.0: supports D1 D2 |
| [ 0.413617] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.414052] pci 0000:00:1c.1: PCI bridge to [bus 02] |
| [ 0.414110] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff] |
| [ 0.414172] pci 0000:00:1c.1: bridge window [mem 0xe0000000-0xe08fffff] |
| [ 0.414237] pci 0000:00:1c.1: bridge window [mem 0xe0c00000-0xe13fffff 64bit pref] |
| [ 0.414372] pci 0000:00:1c.2: PCI bridge to [bus 03] |
| [ 0.414432] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff] |
| [ 0.414492] pci 0000:00:1c.2: bridge window [mem 0xe1c00000-0xe23fffff] |
| [ 0.414558] pci 0000:00:1c.2: bridge window [mem 0xe1400000-0xe1bfffff 64bit pref] |
| [ 0.414768] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.414863] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.414958] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.415049] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.415142] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.415235] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.415328] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.415421] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.416061] ACPI: EC: interrupt unblocked |
| [ 0.416123] ACPI: EC: event unblocked |
| [ 0.416183] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62 |
| [ 0.416251] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC used to handle transactions and events |
| [ 0.416365] pci 0000:00:02.0: vgaarb: setting as boot VGA device |
| [ 0.416365] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none |
| [ 0.416365] pci 0000:00:02.0: vgaarb: bridge control possible |
| [ 0.416365] vgaarb: loaded |
| [ 0.416365] EDAC MC: Ver: 3.0.0 |
| [ 0.416365] PCI: Using ACPI for IRQ routing |
| [ 0.417193] PCI: pci_cache_line_size set to 64 bytes |
| [ 0.417544] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] |
| [ 0.417545] e820: reserve RAM buffer [mem 0x7ff25000-0x7fffffff] |
| [ 0.417546] e820: reserve RAM buffer [mem 0x47b600000-0x47bffffff] |
| [ 0.418116] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 |
| [ 0.418177] hpet0: 8 comparators, 64-bit 14.318180 MHz counter |
| [ 0.420682] clocksource: Switched to clocksource tsc-early |
| [ 0.429135] VFS: Disk quotas dquot_6.6.0 |
| [ 0.429206] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) |
| [ 0.429360] AppArmor: AppArmor Filesystem Enabled |
| [ 0.429432] pnp: PnP ACPI init |
| [ 0.429622] pnp 00:00: [Firmware Bug]: PNP resource [mem 0xf0000000-0x12fffffff] covers only part of 0000:00:00.0 Intel MCH; extending to [mem 0xfed10000-0xfed17fff] |
| [ 0.429732] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved |
| [ 0.429792] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved |
| [ 0.429852] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved |
| [ 0.431116] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved |
| [ 0.431174] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved |
| [ 0.431233] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved |
| [ 0.431293] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved |
| [ 0.431353] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved |
| [ 0.431413] system 00:00: [mem 0x20000000-0x201fffff] could not be reserved |
| [ 0.431473] system 00:00: [mem 0x40000000-0x401fffff] could not be reserved |
| [ 0.431538] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) |
| [ 0.431934] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved |
| [ 0.431997] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) |
| [ 0.432027] system 00:02: [io 0x0500-0x057f] has been reserved |
| [ 0.432086] system 00:02: [io 0x0480-0x04bf] has been reserved |
| [ 0.432143] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) |
| [ 0.432160] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) |
| [ 0.432184] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) |
| [ 0.432203] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active) |
| [ 0.432222] pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active) |
| [ 0.432239] pnp: PnP ACPI: found 7 devices |
| [ 0.433497] thermal_sys: Registered thermal governor 'fair_share' |
| [ 0.433497] thermal_sys: Registered thermal governor 'bang_bang' |
| [ 0.433554] thermal_sys: Registered thermal governor 'step_wise' |
| [ 0.433610] thermal_sys: Registered thermal governor 'user_space' |
| [ 0.438163] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns |
| [ 0.438326] pci 0000:00:1c.0: PCI bridge to [bus 01] |
| [ 0.438389] pci 0000:00:1c.0: bridge window [mem 0xe2800000-0xe2afffff] |
| [ 0.438458] pci 0000:00:1c.1: PCI bridge to [bus 02] |
| [ 0.438516] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff] |
| [ 0.438578] pci 0000:00:1c.1: bridge window [mem 0xe0000000-0xe08fffff] |
| [ 0.438641] pci 0000:00:1c.1: bridge window [mem 0xe0c00000-0xe13fffff 64bit pref] |
| [ 0.438718] pci 0000:00:1c.2: PCI bridge to [bus 03] |
| [ 0.438776] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff] |
| [ 0.438838] pci 0000:00:1c.2: bridge window [mem 0xe1c00000-0xe23fffff] |
| [ 0.438898] pci 0000:00:1c.2: bridge window [mem 0xe1400000-0xe1bfffff 64bit pref] |
| [ 0.438973] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] |
| [ 0.439032] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] |
| [ 0.439091] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] |
| [ 0.439151] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] |
| [ 0.439210] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window] |
| [ 0.439269] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window] |
| [ 0.439328] pci_bus 0000:00: resource 10 [mem 0x000d4000-0x000d7fff window] |
| [ 0.439387] pci_bus 0000:00: resource 11 [mem 0x000d8000-0x000dbfff window] |
| [ 0.439446] pci_bus 0000:00: resource 12 [mem 0x000dc000-0x000dffff window] |
| [ 0.439506] pci_bus 0000:00: resource 13 [mem 0x000e0000-0x000e3fff window] |
| [ 0.439565] pci_bus 0000:00: resource 14 [mem 0x000e4000-0x000e7fff window] |
| [ 0.439625] pci_bus 0000:00: resource 15 [mem 0x000e8000-0x000ebfff window] |
| [ 0.439683] pci_bus 0000:00: resource 16 [mem 0x000ec000-0x000effff window] |
| [ 0.439742] pci_bus 0000:00: resource 17 [mem 0x000f0000-0x000fffff window] |
| [ 0.439801] pci_bus 0000:00: resource 18 [mem 0x82a00000-0xefffffff window] |
| [ 0.439861] pci_bus 0000:00: resource 19 [mem 0xfed40000-0xfed44fff window] |
| [ 0.439921] pci_bus 0000:01: resource 1 [mem 0xe2800000-0xe2afffff] |
| [ 0.439979] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] |
| [ 0.440037] pci_bus 0000:02: resource 1 [mem 0xe0000000-0xe08fffff] |
| [ 0.440096] pci_bus 0000:02: resource 2 [mem 0xe0c00000-0xe13fffff 64bit pref] |
| [ 0.440165] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff] |
| [ 0.440223] pci_bus 0000:03: resource 1 [mem 0xe1c00000-0xe23fffff] |
| [ 0.440280] pci_bus 0000:03: resource 2 [mem 0xe1400000-0xe1bfffff 64bit pref] |
| [ 0.440413] NET: Registered protocol family 2 |
| [ 0.440605] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear) |
| [ 0.440695] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) |
| [ 0.440906] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) |
| [ 0.441079] TCP: Hash tables configured (established 131072 bind 65536) |
| [ 0.441160] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear) |
| [ 0.441247] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear) |
| [ 0.441378] NET: Registered protocol family 1 |
| [ 0.441439] NET: Registered protocol family 44 |
| [ 0.441504] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] |
| [ 0.442348] PCI: CLS 64 bytes, default 64 |
| [ 0.442439] Trying to unpack rootfs image as initramfs... |
| [ 1.177281] Freeing initrd memory: 58476K |
| [ 1.177423] DMAR: No ATSR found |
| [ 1.177504] DMAR: dmar0: Using Queued invalidation |
| [ 1.177566] DMAR: dmar1: Using Queued invalidation |
| [ 1.246811] pci 0000:00:00.0: Adding to iommu group 0 |
| [ 1.249695] pci 0000:00:02.0: Adding to iommu group 1 |
| [ 1.250201] pci 0000:00:02.0: Using iommu direct mapping |
| [ 1.250288] pci 0000:00:04.0: Adding to iommu group 2 |
| [ 1.250374] pci 0000:00:14.0: Adding to iommu group 3 |
| [ 1.250467] pci 0000:00:19.0: Adding to iommu group 4 |
| [ 1.250555] pci 0000:00:1a.0: Adding to iommu group 5 |
| [ 1.250645] pci 0000:00:1b.0: Adding to iommu group 6 |
| [ 1.250735] pci 0000:00:1c.0: Adding to iommu group 7 |
| [ 1.250826] pci 0000:00:1c.1: Adding to iommu group 8 |
| [ 1.250914] pci 0000:00:1c.2: Adding to iommu group 9 |
| [ 1.251008] pci 0000:00:1d.0: Adding to iommu group 10 |
| [ 1.251107] pci 0000:00:1f.0: Adding to iommu group 11 |
| [ 1.251174] pci 0000:00:1f.2: Adding to iommu group 11 |
| [ 1.251240] pci 0000:00:1f.3: Adding to iommu group 11 |
| [ 1.251306] pci 0000:00:1f.6: Adding to iommu group 11 |
| [ 1.251402] pci 0000:01:00.0: Adding to iommu group 12 |
| [ 1.251497] pci 0000:02:00.0: Adding to iommu group 13 |
| [ 1.251744] DMAR: Intel(R) Virtualization Technology for Directed I/O |
| [ 1.253612] Initialise system trusted keyrings |
| [ 1.253678] Key type blacklist registered |
| [ 1.253772] workingset: timestamp_bits=40 max_order=22 bucket_order=0 |
| [ 1.254842] zbud: loaded |
| [ 1.255140] Platform Keyring initialized |
| [ 1.255197] Key type asymmetric registered |
| [ 1.255255] Asymmetric key parser 'x509' registered |
| [ 1.255318] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) |
| [ 1.255422] io scheduler mq-deadline registered |
| [ 1.255736] pcieport 0000:00:1c.0: PME: Signaling with IRQ 26 |
| [ 1.256000] pcieport 0000:00:1c.1: PME: Signaling with IRQ 27 |
| [ 1.256085] pcieport 0000:00:1c.1: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+ |
| [ 1.256400] pcieport 0000:00:1c.2: PME: Signaling with IRQ 28 |
| [ 1.256484] pcieport 0000:00:1c.2: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+ |
| [ 1.256678] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 |
| [ 1.256748] intel_idle: MWAIT substates: 0x21120 |
| [ 1.256749] intel_idle: v0.4.1 model 0x3A |
| [ 1.256893] intel_idle: lapic_timer_reliable_states 0xffffffff |
| [ 1.258422] thermal LNXTHERM:00: registered as thermal_zone0 |
| [ 1.258483] ACPI: Thermal Zone [THM0] (56 C) |
| [ 1.259259] thermal LNXTHERM:01: registered as thermal_zone1 |
| [ 1.259318] ACPI: Thermal Zone [THM1] (27 C) |
| [ 1.259445] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
| [ 1.260010] Linux agpgart interface v0.103 |
| [ 1.260110] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de> |
| [ 1.260170] AMD-Vi: AMD IOMMUv2 functionality not available on this system |
| [ 1.260445] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 |
| [ 1.262088] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| [ 1.262149] serio: i8042 AUX port at 0x60,0x64 irq 12 |
| [ 1.262331] mousedev: PS/2 mouse device common for all mice |
| [ 1.262423] rtc_cmos 00:03: RTC can wake from S4 |
| [ 1.262624] rtc_cmos 00:03: registered as rtc0 |
| [ 1.262694] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs |
| [ 1.262784] intel_pstate: Intel P-state driver initializing |
| [ 1.263024] ledtrig-cpu: registered to indicate activity on CPUs |
| [ 1.263594] NET: Registered protocol family 10 |
| [ 1.263743] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 |
| [ 1.279854] Segment Routing with IPv6 |
| [ 1.279968] mip6: Mobile IPv6 |
| [ 1.280035] NET: Registered protocol family 17 |
| [ 1.280171] mpls_gso: MPLS GSO support |
| [ 1.280805] microcode: sig=0x306a9, pf=0x10, revision=0x21 |
| [ 1.280945] microcode: Microcode Update Driver: v2.2. |
| [ 1.280964] sched_clock: Marking stable (1273215947, 7469067)->(1286549045, -5864031) |
| [ 1.281619] registered taskstats version 1 |
| [ 1.281688] Loading compiled-in X.509 certificates |
| [ 1.318771] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' |
| [ 1.318854] Loaded X.509 cert 'Debian Secure Boot Signer: 00a7468def' |
| [ 1.318929] zswap: loaded using pool lzo/zbud |
| [ 1.319024] AppArmor: AppArmor sha1 policy hashing enabled |
| [ 1.319427] rtc_cmos 00:03: setting system clock to 2019-11-28T12:36:34 UTC (1574944594) |
| [ 1.320807] Freeing unused kernel image memory: 1660K |
| [ 1.359763] Write protecting the kernel read-only data: 16384k |
| [ 1.360822] Freeing unused kernel image memory: 2036K |
| [ 1.361258] Freeing unused kernel image memory: 536K |
| [ 1.376869] x86/mm: Checked W+X mappings: passed, no W+X pages found. |
| [ 1.376929] x86/mm: Checking user space page tables |
| [ 1.382756] x86/mm: Checked W+X mappings: passed, no W+X pages found. |
| [ 1.382815] Run /init as init process |
| [ 1.499522] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2a/PNP0C09:00/PNP0C0E:00/input/input2 |
| [ 1.499621] ACPI: Sleep Button [SLPB] |
| [ 1.499736] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2a/PNP0C09:00/PNP0C0D:00/input/input3 |
| [ 1.499820] ACPI: Lid Switch [LID] |
| [ 1.499929] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 |
| [ 1.500336] ACPI: Power Button [PWRF] |
| [ 1.514901] pps_core: LinuxPPS API ver. 1 registered |
| [ 1.514962] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> |
| [ 1.516478] PTP clock support registered |
| [ 1.529164] ACPI: bus type USB registered |
| [ 1.529242] usbcore: registered new interface driver usbfs |
| [ 1.529307] usbcore: registered new interface driver hub |
| [ 1.529390] usbcore: registered new device driver usb |
| [ 1.541137] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt |
| [ 1.541587] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20190703/utaddress-204) |
| [ 1.542900] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 1.542979] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20190703/utaddress-204) |
| [ 1.543075] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 1.543150] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20190703/utaddress-204) |
| [ 1.543246] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 1.543322] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20190703/utaddress-204) |
| [ 1.543416] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 1.543491] lpc_ich: Resource conflict(s) found affecting gpio_ich |
| [ 1.549414] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| [ 1.550702] ehci-pci: EHCI PCI platform driver |
| [ 1.550913] ehci-pci 0000:00:1a.0: EHCI Host Controller |
| [ 1.550977] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 |
| [ 1.551066] ehci-pci 0000:00:1a.0: debug port 2 |
| [ 1.555039] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported |
| [ 1.555121] ehci-pci 0000:00:1a.0: irq 19, io mem 0xe2b3f000 |
| [ 1.558627] sdhci: Secure Digital Host Controller Interface driver |
| [ 1.558688] sdhci: Copyright(c) Pierre Ossman |
| [ 1.565391] cryptd: max_cpu_qlen set to 1000 |
| [ 1.566031] SCSI subsystem initialized |
| [ 1.569519] sdhci-pci 0000:02:00.0: SDHCI controller found [1180:e822] (rev 7) |
| [ 1.570165] sdhci-pci 0000:02:00.0: Will use DMA mode even though HW doesn't fully claim to support it. |
| [ 1.570435] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes |
| [ 1.571640] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 |
| [ 1.571751] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03 |
| [ 1.571828] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.571907] usb usb1: Product: EHCI Host Controller |
| [ 1.571972] usb usb1: Manufacturer: Linux 5.3.0-2-amd64 ehci_hcd |
| [ 1.572034] usb usb1: SerialNumber: 0000:00:1a.0 |
| [ 1.572480] hub 1-0:1.0: USB hub found |
| [ 1.572547] hub 1-0:1.0: 3 ports detected |
| [ 1.572866] ehci-pci 0000:00:1d.0: EHCI Host Controller |
| [ 1.573561] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 |
| [ 1.573905] ehci-pci 0000:00:1d.0: debug port 2 |
| [ 1.574824] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k |
| [ 1.574913] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. |
| [ 1.575136] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode |
| [ 1.577897] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported |
| [ 1.578080] ehci-pci 0000:00:1d.0: irq 18, io mem 0xe2b40000 |
| [ 1.591856] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 |
| [ 1.591981] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03 |
| [ 1.592055] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.592127] usb usb2: Product: EHCI Host Controller |
| [ 1.592187] usb usb2: Manufacturer: Linux 5.3.0-2-amd64 ehci_hcd |
| [ 1.592251] usb usb2: SerialNumber: 0000:00:1d.0 |
| [ 1.592742] hub 2-0:1.0: USB hub found |
| [ 1.592809] hub 2-0:1.0: 3 ports detected |
| [ 1.593739] xhci_hcd 0000:00:14.0: xHCI Host Controller |
| [ 1.593804] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 |
| [ 1.595952] xhci_hcd 0000:00:14.0: hcc params 0x200071a1 hci version 0x100 quirks 0x000000000000b930 |
| [ 1.596031] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported |
| [ 1.596733] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03 |
| [ 1.596805] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.596876] usb usb3: Product: xHCI Host Controller |
| [ 1.596934] usb usb3: Manufacturer: Linux 5.3.0-2-amd64 xhci-hcd |
| [ 1.596992] usb usb3: SerialNumber: 0000:00:14.0 |
| [ 1.597254] sdhci-pci 0000:02:00.0: Will use DMA mode even though HW doesn't fully claim to support it. |
| [ 1.598892] hub 3-0:1.0: USB hub found |
| [ 1.598958] hub 3-0:1.0: 4 ports detected |
| [ 1.601947] xhci_hcd 0000:00:14.0: xHCI Host Controller |
| [ 1.602011] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 |
| [ 1.602086] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed |
| [ 1.603173] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.03 |
| [ 1.603245] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.603315] usb usb4: Product: xHCI Host Controller |
| [ 1.603373] usb usb4: Manufacturer: Linux 5.3.0-2-amd64 xhci-hcd |
| [ 1.603433] usb usb4: SerialNumber: 0000:00:14.0 |
| [ 1.604035] mmc0: SDHCI controller on PCI [0000:02:00.0] using DMA |
| [ 1.604171] hub 4-0:1.0: USB hub found |
| [ 1.604359] hub 4-0:1.0: 4 ports detected |
| [ 1.622424] AVX version of gcm_enc/dec engaged. |
| [ 1.622484] AES CTR mode by8 optimization enabled |
| [ 1.625210] libata version 3.00 loaded. |
| [ 1.631754] ahci 0000:00:1f.2: version 3.0 |
| [ 1.631956] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled |
| [ 1.642120] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x17 impl SATA mode |
| [ 1.642196] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst |
| [ 1.642879] scsi host0: ahci |
| [ 1.643380] scsi host1: ahci |
| [ 1.643535] scsi host2: ahci |
| [ 1.643856] scsi host3: ahci |
| [ 1.644064] scsi host4: ahci |
| [ 1.644208] scsi host5: ahci |
| [ 1.644335] ata1: SATA max UDMA/133 abar m2048@0xe2b3e000 port 0xe2b3e100 irq 31 |
| [ 1.644407] ata2: SATA max UDMA/133 abar m2048@0xe2b3e000 port 0xe2b3e180 irq 31 |
| [ 1.644477] ata3: SATA max UDMA/133 abar m2048@0xe2b3e000 port 0xe2b3e200 irq 31 |
| [ 1.644546] ata4: DUMMY |
| [ 1.644599] ata5: SATA max UDMA/133 abar m2048@0xe2b3e000 port 0xe2b3e300 irq 31 |
| [ 1.644668] ata6: DUMMY |
| [ 1.675397] [drm] VT-d active for gfx access |
| [ 1.675460] i915 0000:00:02.0: vgaarb: deactivate vga console |
| [ 1.676562] Console: switching to colour dummy device 80x25 |
| [ 1.676620] [drm] DMAR active, disabling use of stolen memory |
| [ 1.721826] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock |
| [ 1.727712] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). |
| [ 1.727722] [drm] Driver supports precise vblank timestamp query. |
| [ 1.728240] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem |
| [ 1.743108] mmc0: new high speed SD card at address e42f |
| [ 1.748793] mmcblk0: mmc0:e42f SD02G 1.89 GiB |
| [ 1.749783] mmcblk0: p1 |
| [ 1.777084] [drm] Initialized i915 1.6.0 20190619 for 0000:00:02.0 on minor 0 |
| [ 1.777192] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) |
| [ 1.800724] acpi device:0d: registered as cooling_device5 |
| [ 1.800842] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6 |
| [ 1.819356] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 3c:97:0e:46:56:66 |
| [ 1.819360] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection |
| [ 1.819398] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF |
| [ 1.820351] e1000e 0000:00:19.0 eno0: renamed from eth0 |
| [ 1.919674] usb 1-1: new high-speed USB device number 2 using ehci-pci |
| [ 1.931700] usb 2-1: new high-speed USB device number 2 using ehci-pci |
| [ 1.947726] usb 3-3: new high-speed USB device number 2 using xhci_hcd |
| [ 1.958134] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [ 1.959169] ata1.00: ATA-9: KINGSTON SKC400S37512G, SAFM001B, max UDMA/133 |
| [ 1.959179] ata1.00: 1000215216 sectors, multi 0: LBA48 NCQ (depth 32), AA |
| [ 1.959582] ata1.00: configured for UDMA/133 |
| [ 1.959864] scsi 0:0:0:0: Direct-Access ATA KINGSTON SKC400S 001B PQ: 0 ANSI: 5 |
| [ 2.076056] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 |
| [ 2.076061] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 2.076205] hub 1-1:1.0: USB hub found |
| [ 2.076306] hub 1-1:1.0: 6 ports detected |
| [ 2.096523] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 |
| [ 2.096528] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 2.096818] hub 2-1:1.0: USB hub found |
| [ 2.097045] hub 2-1:1.0: 8 ports detected |
| [ 2.099680] usb 3-3: New USB device found, idVendor=2109, idProduct=2813, bcdDevice= 2.21 |
| [ 2.099684] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 2.099687] usb 3-3: Product: USB2.0 Hub |
| [ 2.099690] usb 3-3: Manufacturer: VIA Labs, Inc. |
| [ 2.100567] hub 3-3:1.0: USB hub found |
| [ 2.100745] hub 3-3:1.0: 4 ports detected |
| [ 2.103439] fbcon: i915drmfb (fb0) is primary device |
| [ 2.259716] tsc: Refined TSC clocksource calibration: 2893.427 MHz |
| [ 2.259736] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29b502105a9, max_idle_ns: 440795323709 ns |
| [ 2.259772] clocksource: Switched to clocksource tsc |
| [ 2.274800] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [ 2.284504] usb 4-3: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd |
| [ 2.312371] ata2.00: ATA-10: ST2000LM015-2E8174, SDM1, max UDMA/133 |
| [ 2.312374] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA |
| [ 2.332762] psmouse serio1: synaptics: queried max coordinates: x [..5470], y [..4498] |
| [ 2.362264] ata2.00: configured for UDMA/133 |
| [ 2.363724] usb 1-1.3: new full-speed USB device number 3 using ehci-pci |
| [ 2.371810] scsi 1:0:0:0: Direct-Access ATA ST2000LM015-2E81 SDM1 PQ: 0 ANSI: 5 |
| [ 2.387746] usb 2-1.5: new high-speed USB device number 3 using ehci-pci |
| [ 2.394386] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b1/0xb40000/0xa0000/0x0, board id: 0, fw id: 920262 |
| [ 2.394404] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0 |
| [ 2.428052] usb 4-3: New USB device found, idVendor=2109, idProduct=0813, bcdDevice= 2.21 |
| [ 2.428056] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 2.428059] usb 4-3: Product: USB3.0 Hub |
| [ 2.428061] usb 4-3: Manufacturer: VIA Labs, Inc. |
| [ 2.431083] hub 4-3:1.0: USB hub found |
| [ 2.431331] hub 4-3:1.0: 4 ports detected |
| [ 2.433405] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5 |
| [ 2.473654] usb 1-1.3: New USB device found, idVendor=147e, idProduct=2020, bcdDevice= 0.01 |
| [ 2.473658] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 2.473660] usb 1-1.3: Product: Biometric Coprocessor |
| [ 2.473662] usb 1-1.3: Manufacturer: Auth |
| [ 2.496554] usb 2-1.5: New USB device found, idVendor=17ef, idProduct=100a, bcdDevice= 0.00 |
| [ 2.496558] usb 2-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 2.497128] hub 2-1.5:1.0: USB hub found |
| [ 2.497471] hub 2-1.5:1.0: 6 ports detected |
| [ 2.551751] usb 1-1.4: new full-speed USB device number 4 using ehci-pci |
| [ 2.664636] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=21e6, bcdDevice= 1.12 |
| [ 2.664640] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [ 2.664642] usb 1-1.4: Product: BCM20702A0 |
| [ 2.664644] usb 1-1.4: Manufacturer: Broadcom Corp |
| [ 2.664646] usb 1-1.4: SerialNumber: B8763FA9D32E |
| [ 2.686615] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) |
| [ 2.686982] ata3.00: supports DRM functions and may not be fully accessible |
| [ 2.687072] ata3.00: ATA-11: KINGSTON SUV500MS240G, 003056RI, max UDMA/133 |
| [ 2.687074] ata3.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 32), AA |
| [ 2.687800] ata3.00: Trusted Computing capability qword not valid! |
| [ 2.688223] ata3.00: supports DRM functions and may not be fully accessible |
| [ 2.688991] ata3.00: Trusted Computing capability qword not valid! |
| [ 2.688995] ata3.00: configured for UDMA/133 |
| [ 2.689360] scsi 2:0:0:0: Direct-Access ATA KINGSTON SUV500M 56RI PQ: 0 ANSI: 5 |
| [ 2.743753] usb 1-1.6: new high-speed USB device number 5 using ehci-pci |
| [ 2.791755] usb 2-1.5.1: new full-speed USB device number 4 using ehci-pci |
| [ 2.860199] usb 1-1.6: New USB device found, idVendor=5986, idProduct=02d5, bcdDevice=10.11 |
| [ 2.860203] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 2.860205] usb 1-1.6: Product: Integrated Camera |
| [ 2.860207] usb 1-1.6: Manufacturer: Ricoh Company Ltd. |
| [ 2.904840] usb 2-1.5.1: New USB device found, idVendor=17ef, idProduct=604d, bcdDevice= 1.22 |
| [ 2.904844] usb 2-1.5.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0 |
| [ 2.904846] usb 2-1.5.1: Product: Lenovo USB Receiver |
| [ 2.913334] Console: switching to colour frame buffer device 240x67 |
| [ 2.916748] hidraw: raw HID events driver (C) Jiri Kosina |
| [ 2.925908] usbcore: registered new interface driver usbhid |
| [ 2.925909] usbhid: USB HID core driver |
| [ 2.928510] input: Lenovo USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5.1/2-1.5.1:1.0/0003:17EF:604D.0001/input/input8 |
| [ 2.958995] i915 0000:00:02.0: fb0: i915drmfb frame buffer device |
| [ 2.983768] usb 2-1.5.6: new high-speed USB device number 5 using ehci-pci |
| [ 2.987949] hid-generic 0003:17EF:604D.0001: input,hidraw0: USB HID v1.11 Keyboard [Lenovo USB Receiver] on usb-0000:00:1d.0-1.5.1/input0 |
| [ 2.990842] input: Lenovo USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5.1/2-1.5.1:1.1/0003:17EF:604D.0002/input/input9 |
| [ 2.993929] hid-generic 0003:17EF:604D.0002: input,hidraw1: USB HID v1.11 Mouse [Lenovo USB Receiver] on usb-0000:00:1d.0-1.5.1/input1 |
| [ 2.996927] input: Lenovo USB Receiver Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5.1/2-1.5.1:1.2/0003:17EF:604D.0003/input/input10 |
| [ 3.002547] ata5: SATA link down (SStatus 0 SControl 300) |
| [ 3.016959] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) |
| [ 3.017551] sd 2:0:0:0: [sdc] 468862128 512-byte logical blocks: (240 GB/224 GiB) |
| [ 3.018447] sd 1:0:0:0: [sdb] 4096-byte physical blocks |
| [ 3.019726] sd 0:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/477 GiB) |
| [ 3.019738] sd 0:0:0:0: [sda] Write Protect is off |
| [ 3.019740] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 |
| [ 3.019759] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 3.019993] sd 2:0:0:0: [sdc] 4096-byte physical blocks |
| [ 3.020022] sd 2:0:0:0: [sdc] Write Protect is off |
| [ 3.020992] sda: sda1 sda2 < sda5 > |
| [ 3.021293] sd 0:0:0:0: [sda] Attached SCSI disk |
| [ 3.021618] sd 1:0:0:0: [sdb] Write Protect is off |
| [ 3.023238] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 |
| [ 3.023257] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 3.024796] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 |
| [ 3.038490] sdc: sdc1 sdc2 sdc3 |
| [ 3.038588] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 3.040247] sd 2:0:0:0: [sdc] Attached SCSI disk |
| [ 3.055867] input: Lenovo USB Receiver System Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5.1/2-1.5.1:1.2/0003:17EF:604D.0003/input/input11 |
| [ 3.058730] input: Lenovo USB Receiver Keypad as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5.1/2-1.5.1:1.2/0003:17EF:604D.0003/input/input12 |
| [ 3.061622] hid-generic 0003:17EF:604D.0003: input,hiddev0,hidraw2: USB HID v1.11 Keypad [Lenovo USB Receiver] on usb-0000:00:1d.0-1.5.1/input2 |
| [ 3.071314] sdb: sdb1 |
| [ 3.073011] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 |
| [ 3.075441] sd 1:0:0:0: [sdb] Attached SCSI disk |
| [ 3.100369] usb 2-1.5.6: New USB device found, idVendor=0409, idProduct=005a, bcdDevice= 1.00 |
| [ 3.101993] usb 2-1.5.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 3.104086] hub 2-1.5.6:1.0: USB hub found |
| [ 3.106325] hub 2-1.5.6:1.0: 4 ports detected |
| [ 3.330796] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input7 |
| [ 3.339704] usb 2-1.5.2: new full-speed USB device number 6 using ehci-pci |
| [ 3.419664] raid6: sse2x4 gen() 11310 MB/s |
| [ 3.450725] usb 2-1.5.2: New USB device found, idVendor=04b4, idProduct=4042, bcdDevice= 1.03 |
| [ 3.452227] usb 2-1.5.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 3.458307] input: HID 04b4:4042 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5.2/2-1.5.2:1.0/0003:04B4:4042.0004/input/input13 |
| [ 3.487667] raid6: sse2x4 xor() 9564 MB/s |
| [ 3.519814] hid-generic 0003:04B4:4042.0004: input,hidraw3: USB HID v1.11 Keyboard [HID 04b4:4042] on usb-0000:00:1d.0-1.5.2/input0 |
| [ 3.527790] usb 2-1.5.6.1: new high-speed USB device number 7 using ehci-pci |
| [ 3.530080] input: HID 04b4:4042 Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5.2/2-1.5.2:1.1/0003:04B4:4042.0005/input/input14 |
| [ 3.532614] input: HID 04b4:4042 System Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5.2/2-1.5.2:1.1/0003:04B4:4042.0005/input/input15 |
| [ 3.555669] raid6: sse2x2 gen() 9827 MB/s |
| [ 3.591717] input: HID 04b4:4042 Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5.2/2-1.5.2:1.1/0003:04B4:4042.0005/input/input16 |
| [ 3.594123] input: HID 04b4:4042 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5.2/2-1.5.2:1.1/0003:04B4:4042.0005/input/input17 |
| [ 3.596538] input: HID 04b4:4042 Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5.2/2-1.5.2:1.1/0003:04B4:4042.0005/input/input18 |
| [ 3.599024] hid-generic 0003:04B4:4042.0005: input,hiddev1,hidraw4: USB HID v1.11 Mouse [HID 04b4:4042] on usb-0000:00:1d.0-1.5.2/input1 |
| [ 3.623667] raid6: sse2x2 xor() 5836 MB/s |
| [ 3.640487] usb 2-1.5.6.1: New USB device found, idVendor=0409, idProduct=005a, bcdDevice= 1.00 |
| [ 3.642178] usb 2-1.5.6.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 3.644193] hub 2-1.5.6.1:1.0: USB hub found |
| [ 3.646240] hub 2-1.5.6.1:1.0: 4 ports detected |
| [ 3.691668] raid6: sse2x1 gen() 10760 MB/s |
| [ 3.759664] raid6: sse2x1 xor() 7588 MB/s |
| [ 3.761324] raid6: using algorithm sse2x4 gen() 11310 MB/s |
| [ 3.762979] raid6: .... xor() 9564 MB/s, rmw enabled |
| [ 3.764617] raid6: using ssse3x2 recovery algorithm |
| [ 3.767247] xor: automatically using best checksumming function avx |
| [ 3.771048] async_tx: api initialized (async) |
| [ 3.935768] usb 2-1.5.6.1.2: new full-speed USB device number 8 using ehci-pci |
| [ 3.983418] device-mapper: uevent: version 1.0.3 |
| [ 3.985234] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com |
| [ 4.055023] usb 2-1.5.6.1.2: New USB device found, idVendor=067b, idProduct=2305, bcdDevice= 2.02 |
| [ 4.058985] usb 2-1.5.6.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 4.061366] usb 2-1.5.6.1.2: Product: IEEE-1284 Controller |
| [ 4.063689] usb 2-1.5.6.1.2: Manufacturer: Prolific Technology Inc. |
| [ 4.163760] usb 2-1.5.6.1.3: new full-speed USB device number 9 using ehci-pci |
| [ 4.278153] usb 2-1.5.6.1.3: New USB device found, idVendor=067b, idProduct=2303, bcdDevice= 4.00 |
| [ 4.282008] usb 2-1.5.6.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 4.285815] usb 2-1.5.6.1.3: Product: USB-Serial Controller D |
| [ 4.287391] usb 2-1.5.6.1.3: Manufacturer: Prolific Technology Inc. |
| [ 12.516456] PM: Image not found (code -22) |
| [ 12.521838] PM: Marking nosave pages: [mem 0x00000000-0x00000fff] |
| [ 12.521841] PM: Marking nosave pages: [mem 0x0009f000-0x000fffff] |
| [ 12.521846] PM: Marking nosave pages: [mem 0x7ff25000-0xffffffff] |
| [ 12.524162] PM: Basic memory bitmaps created |
| [ 12.524987] PM: Basic memory bitmaps freed |
| [ 12.525996] video LNXVIDEO:00: Restoring backlight state |
| [ 13.784185] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) |
| [ 13.848087] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. |
| [ 14.006039] systemd[1]: Inserted module 'autofs4' |
| [ 14.029548] systemd[1]: systemd 243-8 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) |
| [ 14.051968] systemd[1]: Detected architecture x86-64. |
| [ 14.061773] systemd[1]: Set hostname to <TP-T430s>. |
| [ 14.168669] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly. |
| [ 14.199172] systemd[1]: /lib/systemd/system/thinkfan.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/thinkfan.pid → /run/thinkfan.pid; please update the unit file accordingly. |
| [ 14.202476] systemd[1]: /etc/systemd/system/teamviewerd.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/teamviewerd.pid → /run/teamviewerd.pid; please update the unit file accordingly. |
| [ 14.222843] systemd[1]: /lib/systemd/system/fancontrol.service:10: PIDFile= references a path below legacy directory /var/run/, updating /var/run/fancontrol.pid → /run/fancontrol.pid; please update the unit file accordingly. |
| [ 14.226076] systemd[1]: /lib/systemd/system/docker.socket:6: ListenStream= references a path below legacy directory /var/run/, updating /var/run/docker.sock → /run/docker.sock; please update the unit file accordingly. |
| [ 14.233386] systemd[1]: /etc/systemd/system/anydesk.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/anydesk.pid → /run/anydesk.pid; please update the unit file accordingly. |
| [ 14.258682] systemd[1]: /lib/systemd/system/pcscd.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/pcscd/pcscd.comm → /run/pcscd/pcscd.comm; please update the unit file accordingly. |
| [ 14.347620] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro |
| [ 14.369785] loop: module loaded |
| [ 14.391339] lp: driver loaded but no devices found |
| [ 14.398192] ppdev: user-space parallel port driver |
| [ 14.483447] squashfs: version 4.0 (2009/01/31) Phillip Lougher |
| [ 14.763598] systemd-journald[483]: Received client request to flush runtime journal. |
| [ 14.797494] ACPI: AC Adapter [AC] (on-line) |
| [ 14.806007] battery: ACPI: Battery Slot [BAT0] (battery present) |
| [ 14.806313] tpm_tis 00:06: 1.2 TPM (device-id 0x0, rev-id 78) |
| [ 14.807493] battery: ACPI: Battery Slot [BAT1] (battery absent) |
| [ 14.930347] Non-volatile memory driver v1.3 |
| [ 14.933528] sd 0:0:0:0: Attached scsi generic sg0 type 0 |
| [ 14.940427] sd 1:0:0:0: Attached scsi generic sg1 type 0 |
| [ 14.944078] sd 2:0:0:0: Attached scsi generic sg2 type 0 |
| [ 14.950198] iTCO_vendor_support: vendor-support=0 |
| [ 14.993748] thinkpad_acpi: ThinkPad ACPI Extras v0.26 |
| [ 14.995281] thinkpad_acpi: http://ibm-acpi.sf.net/ |
| [ 14.996854] thinkpad_acpi: ThinkPad BIOS CBET4000 4.11-165-gc2a05d143b, EC G7HT39WW-3.22 |
| [ 14.998210] thinkpad_acpi: Lenovo ThinkPad T430s, model 23532NU |
| [ 15.005737] input: PC Speaker as /devices/platform/pcspkr/input/input19 |
| [ 15.008119] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 |
| [ 15.009824] thinkpad_acpi: radio switch found; radios are enabled |
| [ 15.011584] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560) |
| [ 15.013284] thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode |
| [ 15.013362] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) |
| [ 15.015187] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver |
| [ 15.018272] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... |
| [ 15.024431] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) |
| [ 15.026365] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked |
| [ 15.034488] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer |
| [ 15.035350] thinkpad_acpi: rfkill switch tpacpi_wwan_sw: radio is unblocked |
| [ 15.036261] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules |
| [ 15.036262] RAPL PMU: hw unit of domain package 2^-16 Joules |
| [ 15.036264] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules |
| [ 15.046784] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one |
| [ 15.048635] thinkpad_acpi: Console audio control enabled, mode: monitor (read only) |
| [ 15.053890] thinkpad_acpi: battery 1 registered (start 0, stop 100) |
| [ 15.053895] battery: new extension: ThinkPad Battery Extension |
| [ 15.069217] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input20 |
| [ 15.071725] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker |
| [ 15.073564] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) |
| [ 15.075396] snd_hda_codec_realtek hdaudioC0D0: hp_outs=2 (0x15/0x1b/0x0/0x0/0x0) |
| [ 15.077166] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 |
| [ 15.078935] snd_hda_codec_realtek hdaudioC0D0: inputs: |
| [ 15.084899] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18 |
| [ 15.086599] snd_hda_codec_realtek hdaudioC0D0: Dock Mic=0x19 |
| [ 15.088388] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12 |
| [ 15.092824] wl: loading out-of-tree module taints kernel. |
| [ 15.094589] wl: module license 'MIXED/Proprietary' taints kernel. |
| [ 15.096285] Disabling lock debugging due to kernel taint |
| [ 15.126823] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21 |
| [ 15.128792] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input22 |
| [ 15.130719] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input23 |
| [ 15.132839] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input24 |
| [ 15.134882] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input25 |
| [ 15.138850] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input26 |
| [ 15.140892] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input27 |
| [ 15.141140] wl: module verification failed: signature and/or required key missing - tainting kernel |
| [ 15.142696] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input28 |
| [ 15.192634] wlan0: Broadcom BCM43a0 802.11 Hybrid Wireless Controller 6.30.223.271 (r587334) |
| |
| [ 15.331711] Adding 16699388k swap on /dev/mapper/TP--T430s--vg-swap_1. Priority:-2 extents:1 across:16699388k SSFS |
| [ 15.456278] wl 0000:01:00.0 wlp1s0: renamed from wlan0 |
| [ 15.499242] intel_rapl_common: Found RAPL domain package |
| [ 15.501134] intel_rapl_common: Found RAPL domain core |
| [ 15.502629] intel_rapl_common: Found RAPL domain uncore |
| [ 15.684348] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem |
| [ 15.693678] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null) |
| [ 15.817970] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) |
| [ 15.868906] audit: type=1400 audit(1574944609.044:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1252 comm="apparmor_parser" |
| [ 15.868910] audit: type=1400 audit(1574944609.044:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1252 comm="apparmor_parser" |
| [ 15.868912] audit: type=1400 audit(1574944609.044:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1252 comm="apparmor_parser" |
| [ 15.870358] audit: type=1400 audit(1574944609.044:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=1251 comm="apparmor_parser" |
| [ 15.870703] audit: type=1400 audit(1574944609.044:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="system_tor" pid=1254 comm="apparmor_parser" |
| [ 15.879824] audit: type=1400 audit(1574944609.056:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/mysqld" pid=1253 comm="apparmor_parser" |
| [ 15.881599] audit: type=1400 audit(1574944609.056:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/haveged" pid=1259 comm="apparmor_parser" |
| [ 15.885005] audit: type=1400 audit(1574944609.064:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/freshclam" pid=1257 comm="apparmor_parser" |
| [ 15.886647] audit: type=1400 audit(1574944609.064:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ioquake3" pid=1256 comm="apparmor_parser" |
| [ 15.889738] audit: type=1400 audit(1574944609.064:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ioquake3//popup" pid=1256 comm="apparmor_parser" |
| [ 15.991357] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input29 |
| [ 16.166973] Process accounting resumed |
| [ 17.690183] mc: Linux media interface: v0.10 |
| [ 17.718661] videodev: Linux video capture interface: v2.00 |
| [ 17.735058] alg: No test for fips(ansi_cprng) (fips_ansi_cprng) |
| [ 17.836615] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:02d5) |
| [ 17.865060] Bluetooth: Core ver 2.22 |
| [ 17.866613] NET: Registered protocol family 31 |
| [ 17.867909] Bluetooth: HCI device and connection manager initialized |
| [ 17.869569] Bluetooth: HCI socket layer initialized |
| [ 17.871414] Bluetooth: L2CAP socket layer initialized |
| [ 17.871592] uvcvideo 1-1.6:1.0: Entity type for entity Extension 4 was not initialized! |
| [ 17.873808] uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized! |
| [ 17.875407] uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized! |
| [ 17.876561] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized! |
| [ 17.878301] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input30 |
| [ 17.879824] usbcore: registered new interface driver uvcvideo |
| [ 17.881154] USB Video Class driver (1.1.1) |
| [ 17.884728] Bluetooth: SCO socket layer initialized |
| [ 17.915691] usbcore: registered new interface driver btusb |
| [ 17.996520] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 |
| [ 17.997951] Bluetooth: BNEP filters: protocol multicast |
| [ 17.999389] Bluetooth: BNEP socket layer initialized |
| [ 18.026335] Bluetooth: hci0: BCM: chip id 63 |
| [ 18.029337] Bluetooth: hci0: BCM: features 0x07 |
| [ 18.047334] Bluetooth: hci0: TP-T430s |
| [ 18.049333] Bluetooth: hci0: BCM20702A1 (001.002.014) build 1669 |
| [ 18.052723] bluetooth hci0: firmware: direct-loading firmware brcm/BCM20702A1-0a5c-21e6.hcd |
| [ 18.914323] Bluetooth: hci0: BCM20702A1 (001.002.014) build 1669 |
| [ 18.930323] Bluetooth: hci0: Broadcom Bluetooth Device |
| [ 19.032258] Bluetooth: RFCOMM TTY layer initialized |
| [ 19.032266] Bluetooth: RFCOMM socket layer initialized |
| [ 19.032272] Bluetooth: RFCOMM ver 1.11 |
| [ 20.113436] usblp 2-1.5.6.1.2:1.0: usblp2: USB Bidirectional printer dev 8 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 |
| [ 20.115014] usbcore: registered new interface driver usblp |
| [ 20.177975] usbcore: registered new interface driver usbserial_generic |
| [ 20.177989] usbserial: USB Serial support registered for generic |
| [ 20.190287] usbcore: registered new interface driver pl2303 |
| [ 20.190301] usbserial: USB Serial support registered for pl2303 |
| [ 20.190333] pl2303 2-1.5.6.1.3:1.0: pl2303 converter detected |
| [ 20.200825] usb 2-1.5.6.1.3: pl2303 converter now attached to ttyUSB0 |
| [ 23.227606] rfkill: input handler disabled |
| [ 23.433422] e1000e: eno0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None |
| [ 23.433465] IPv6: ADDRCONF(NETDEV_CHANGE): eno0: link becomes ready |
| [ 24.229901] kauditd_printk_skb: 32 callbacks suppressed |
| [ 24.229904] audit: type=1400 audit(1574944617.404:44): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=3462 comm="apparmor_parser" |
| [ 24.445390] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. |
| [ 24.447974] Bridge firewalling registered |
| [ 24.788010] Initializing XFRM netlink socket |
| [ 29.368363] e1000e: eno0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None |
| [ 30.947503] rfkill: input handler enabled |
| [ 34.647892] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. |
| [ 35.112235] rfkill: input handler disabled |