| [ 0.000000] Linux version 5.0.0-trunk-amd64 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-3)) #1 SMP Debian 5.0.2-1~exp1 (2019-03-18) |
| [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-5.0.0-trunk-amd64 root=/dev/mapper/TP--T430s--vg-root ro iomem=relaxed |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' |
| [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 |
| [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. |
| [ 0.000000] BIOS-provided physical RAM map: |
| [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ff23fff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000007ff24000-0x00000000829fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000047b5fffff] usable |
| [ 0.000000] NX (Execute Disable) protection: active |
| [ 0.000000] SMBIOS 2.8 present. |
| [ 0.000000] DMI: LENOVO 23532NU/23532NU, BIOS CBET4000 4.10-155-g3f98d41b6e 08/02/2019 |
| [ 0.000000] tsc: Fast TSC calibration using PIT |
| [ 0.000000] tsc: Detected 2893.508 MHz processor |
| [ 0.002003] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| [ 0.002004] e820: remove [mem 0x000a0000-0x000fffff] usable |
| [ 0.002008] last_pfn = 0x47b600 max_arch_pfn = 0x400000000 |
| [ 0.002012] MTRR default type: write-back |
| [ 0.002012] MTRR fixed ranges enabled: |
| [ 0.002013] 00000-9FFFF write-back |
| [ 0.002014] A0000-BFFFF uncachable |
| [ 0.002015] C0000-FFFFF write-back |
| [ 0.002015] MTRR variable ranges enabled: |
| [ 0.002017] 0 base 080000000 mask FC0000000 uncachable |
| [ 0.002017] 1 base 0C0000000 mask FF0000000 uncachable |
| [ 0.002018] 2 base 0D0000000 mask FF0000000 write-combining |
| [ 0.002019] 3 base 0E0000000 mask FE0000000 uncachable |
| [ 0.002019] 4 disabled |
| [ 0.002020] 5 disabled |
| [ 0.002020] 6 disabled |
| [ 0.002020] 7 disabled |
| [ 0.002021] 8 disabled |
| [ 0.002021] 9 disabled |
| [ 0.002768] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT |
| [ 0.003127] last_pfn = 0x7ff24 max_arch_pfn = 0x400000000 |
| [ 0.012556] Base memory trampoline at [(____ptrval____)] 99000 size 24576 |
| [ 0.012560] BRK [0x3f6001000, 0x3f6001fff] PGTABLE |
| [ 0.012562] BRK [0x3f6002000, 0x3f6002fff] PGTABLE |
| [ 0.012563] BRK [0x3f6003000, 0x3f6003fff] PGTABLE |
| [ 0.012588] BRK [0x3f6004000, 0x3f6004fff] PGTABLE |
| [ 0.012590] BRK [0x3f6005000, 0x3f6005fff] PGTABLE |
| [ 0.012665] BRK [0x3f6006000, 0x3f6006fff] PGTABLE |
| [ 0.012685] BRK [0x3f6007000, 0x3f6007fff] PGTABLE |
| [ 0.012845] RAMDISK: [mem 0x31155000-0x348a1fff] |
| [ 0.012852] ACPI: Early table checksum verification disabled |
| [ 0.012910] ACPI: RSDP 0x00000000000F6770 000024 (v02 COREv4) |
| [ 0.012913] ACPI: XSDT 0x000000007FF4A0E0 00005C (v01 COREv4 COREBOOT 00000000 CORE 20190108) |
| [ 0.012918] ACPI: FACP 0x000000007FF4DBC0 0000F4 (v04 COREv4 COREBOOT 00000000 CORE 20190108) |
| [ 0.012922] ACPI: DSDT 0x000000007FF4A280 003937 (v02 COREv4 COREBOOT 20110725 INTL 20190108) |
| [ 0.012925] ACPI: FACS 0x000000007FF4A240 000040 |
| [ 0.012927] ACPI: FACS 0x000000007FF4A240 000040 |
| [ 0.012929] ACPI: SSDT 0x000000007FF4DCC0 001A32 (v02 COREv4 COREBOOT 0000002A CORE 20190108) |
| [ 0.012932] ACPI: MCFG 0x000000007FF4F700 00003C (v01 COREv4 COREBOOT 00000000 CORE 20190108) |
| [ 0.012934] ACPI: TCPA 0x000000007FF4F740 000032 (v02 COREv4 COREBOOT 00000000 CORE 20190108) |
| [ 0.012937] ACPI: APIC 0x000000007FF4F780 00006C (v02 COREv4 COREBOOT 00000000 CORE 20190108) |
| [ 0.012939] ACPI: DMAR 0x000000007FF4F7F0 0000D0 (v01 COREv4 COREBOOT 00000000 CORE 20190108) |
| [ 0.012941] ACPI: HPET 0x000000007FF518C0 000038 (v01 COREv4 COREBOOT 00000000 CORE 20190108) |
| [ 0.012948] ACPI: Local APIC address 0xfee00000 |
| [ 0.013019] No NUMA configuration found |
| [ 0.013020] Faking a node at [mem 0x0000000000000000-0x000000047b5fffff] |
| [ 0.013024] NODE_DATA(0) allocated [mem 0x47b5ee000-0x47b5f2fff] |
| [ 0.013051] Zone ranges: |
| [ 0.013052] DMA [mem 0x0000000000001000-0x0000000000ffffff] |
| [ 0.013054] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] |
| [ 0.013055] Normal [mem 0x0000000100000000-0x000000047b5fffff] |
| [ 0.013056] Device empty |
| [ 0.013057] Movable zone start for each node |
| [ 0.013057] Early memory node ranges |
| [ 0.013058] node 0: [mem 0x0000000000001000-0x000000000009efff] |
| [ 0.013059] node 0: [mem 0x0000000000100000-0x000000007ff23fff] |
| [ 0.013060] node 0: [mem 0x0000000100000000-0x000000047b5fffff] |
| [ 0.013071] Zeroed struct page in unavailable ranges: 318 pages |
| [ 0.013072] Initmem setup node 0 [mem 0x0000000000001000-0x000000047b5fffff] |
| [ 0.013073] On node 0 totalpages: 4175042 |
| [ 0.013074] DMA zone: 64 pages used for memmap |
| [ 0.013075] DMA zone: 21 pages reserved |
| [ 0.013075] DMA zone: 3998 pages, LIFO batch:0 |
| [ 0.013171] DMA32 zone: 8125 pages used for memmap |
| [ 0.013172] DMA32 zone: 519972 pages, LIFO batch:63 |
| [ 0.026677] Normal zone: 57048 pages used for memmap |
| [ 0.026679] Normal zone: 3651072 pages, LIFO batch:63 |
| [ 0.109527] Reserving Intel graphics memory at [mem 0x80a00000-0x829fffff] |
| [ 0.109739] ACPI: PM-Timer IO Port: 0x508 |
| [ 0.109741] ACPI: Local APIC address 0xfee00000 |
| [ 0.109757] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 |
| [ 0.109759] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) |
| [ 0.109761] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) |
| [ 0.109762] ACPI: IRQ0 used by override. |
| [ 0.109763] ACPI: IRQ9 used by override. |
| [ 0.109765] Using ACPI (MADT) for SMP configuration information |
| [ 0.109767] ACPI: HPET id: 0x8086a701 base: 0xfed00000 |
| [ 0.109771] smpboot: Allowing 4 CPUs, 0 hotplug CPUs |
| [ 0.109781] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] |
| [ 0.109782] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] |
| [ 0.109783] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] |
| [ 0.109783] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] |
| [ 0.109785] PM: Registered nosave memory: [mem 0x7ff24000-0x829fffff] |
| [ 0.109785] PM: Registered nosave memory: [mem 0x82a00000-0xefffffff] |
| [ 0.109786] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff] |
| [ 0.109787] PM: Registered nosave memory: [mem 0xf4000000-0xfed3ffff] |
| [ 0.109788] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff] |
| [ 0.109788] PM: Registered nosave memory: [mem 0xfed45000-0xfed8ffff] |
| [ 0.109789] PM: Registered nosave memory: [mem 0xfed90000-0xfed91fff] |
| [ 0.109790] PM: Registered nosave memory: [mem 0xfed92000-0xffffffff] |
| [ 0.109791] [mem 0x82a00000-0xefffffff] available for PCI devices |
| [ 0.109792] Booting paravirtualized kernel on bare hardware |
| [ 0.109795] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns |
| [ 0.205678] random: get_random_bytes called from start_kernel+0x93/0x501 with crng_init=0 |
| [ 0.205684] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 |
| [ 0.205845] percpu: Embedded 44 pages/cpu @(____ptrval____) s142936 r8192 d29096 u524288 |
| [ 0.205851] pcpu-alloc: s142936 r8192 d29096 u524288 alloc=1*2097152 |
| [ 0.205852] pcpu-alloc: [0] 0 1 2 3 |
| [ 0.205867] Built 1 zonelists, mobility grouping on. Total pages: 4109784 |
| [ 0.205868] Policy zone: Normal |
| [ 0.205870] Kernel command line: BOOT_IMAGE=/vmlinuz-5.0.0-trunk-amd64 root=/dev/mapper/TP--T430s--vg-root ro iomem=relaxed |
| [ 0.208946] Calgary: detecting Calgary via BIOS EBDA area |
| [ 0.208951] Calgary: Unable to locate Rio Grande table in EBDA - bailing! |
| [ 0.247423] Memory: 16289800K/16700168K available (10243K kernel code, 1167K rwdata, 3244K rodata, 1580K init, 2352K bss, 410368K reserved, 0K cma-reserved) |
| [ 0.247526] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 |
| [ 0.247531] Kernel/User page tables isolation: enabled |
| [ 0.247544] ftrace: allocating 31966 entries in 125 pages |
| [ 0.258740] rcu: Hierarchical RCU implementation. |
| [ 0.258742] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4. |
| [ 0.258743] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. |
| [ 0.258744] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 |
| [ 0.261487] NR_IRQS: 33024, nr_irqs: 456, preallocated irqs: 16 |
| [ 0.263235] Console: colour VGA+ 80x25 |
| [ 0.268562] printk: console [tty0] enabled |
| [ 0.268630] ACPI: Core revision 20181213 |
| [ 0.268819] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns |
| [ 0.268900] hpet clockevent registered |
| [ 0.268904] APIC: Switch to symmetric I/O mode setup |
| [ 0.268961] DMAR: Host address width 36 |
| [ 0.269017] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 |
| [ 0.269077] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a |
| [ 0.269147] DMAR: RMRR base: 0x00000080800000 end: 0x000000829fffff |
| [ 0.269204] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 |
| [ 0.269264] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a |
| [ 0.269335] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 |
| [ 0.269393] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 |
| [ 0.269447] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. |
| [ 0.269905] DMAR-IR: Enabled IRQ remapping in x2apic mode |
| [ 0.269962] x2apic enabled |
| [ 0.270020] Switched APIC routing to cluster x2apic. |
| [ 0.270509] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 |
| [ 0.288905] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x29b54e820a7, max_idle_ns: 440795351416 ns |
| [ 0.288990] Calibrating delay loop (skipped), value calculated using timer frequency.. 5787.01 BogoMIPS (lpj=11574032) |
| [ 0.289064] pid_max: default: 32768 minimum: 301 |
| [ 0.289141] LSM: Security Framework initializing |
| [ 0.289197] Yama: disabled by default; enable with sysctl kernel.yama.* |
| [ 0.289270] AppArmor: AppArmor initialized |
| [ 0.291464] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) |
| [ 0.292619] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) |
| [ 0.292737] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) |
| [ 0.292828] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) |
| [ 0.293165] mce: CPU supports 7 MCE banks |
| [ 0.293229] mce: CPU0: Thermal monitoring enabled (TM1) |
| [ 0.293292] process: using mwait in idle threads |
| [ 0.293348] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 |
| [ 0.293405] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 |
| [ 0.293463] Spectre V2 : Mitigation: Full generic retpoline |
| [ 0.293521] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch |
| [ 0.293588] Spectre V2 : Enabling Restricted Speculation for firmware calls |
| [ 0.293652] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier |
| [ 0.293723] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl |
| [ 0.293783] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp |
| [ 0.293998] Freeing SMP alternatives memory: 24K |
| [ 0.295567] TSC deadline timer enabled |
| [ 0.295569] smpboot: CPU0: Intel(R) Core(TM) i7-3520M CPU @ 2.90GHz (family: 0x6, model: 0x3a, stepping: 0x9) |
| [ 0.295721] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. |
| [ 0.295813] ... version: 3 |
| [ 0.295867] ... bit width: 48 |
| [ 0.295922] ... generic registers: 4 |
| [ 0.295977] ... value mask: 0000ffffffffffff |
| [ 0.296031] ... max period: 00007fffffffffff |
| [ 0.296088] ... fixed-purpose events: 3 |
| [ 0.296144] ... event mask: 000000070000000f |
| [ 0.296232] rcu: Hierarchical SRCU implementation. |
| [ 0.296594] random: crng done (trusting CPU's manufacturer) |
| [ 0.296834] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. |
| [ 0.296929] smp: Bringing up secondary CPUs ... |
| [ 0.296979] x86: Booting SMP configuration: |
| [ 0.296979] .... node #0, CPUs: #1 #2 #3 |
| [ 0.301027] smp: Brought up 1 node, 4 CPUs |
| [ 0.301097] smpboot: Max logical packages: 1 |
| [ 0.301151] smpboot: Total of 4 processors activated (23148.06 BogoMIPS) |
| [ 0.304238] devtmpfs: initialized |
| [ 0.304238] x86/mm: Memory block size: 128MB |
| [ 0.305826] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns |
| [ 0.305826] futex hash table entries: 1024 (order: 4, 65536 bytes) |
| [ 0.305826] pinctrl core: initialized pinctrl subsystem |
| [ 0.305826] NET: Registered protocol family 16 |
| [ 0.305826] audit: initializing netlink subsys (disabled) |
| [ 0.305826] audit: type=2000 audit(1564825374.036:1): state=initialized audit_enabled=0 res=1 |
| [ 0.305826] cpuidle: using governor ladder |
| [ 0.305826] cpuidle: using governor menu |
| [ 0.305826] ACPI: bus type PCI registered |
| [ 0.305826] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 |
| [ 0.305826] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) |
| [ 0.305826] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 |
| [ 0.305826] PCI: Using configuration type 1 for base access |
| [ 0.305826] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on |
| [ 0.309019] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages |
| [ 0.309056] ACPI: Added _OSI(Module Device) |
| [ 0.309097] ACPI: Added _OSI(Processor Device) |
| [ 0.309153] ACPI: Added _OSI(3.0 _SCP Extensions) |
| [ 0.309209] ACPI: Added _OSI(Processor Aggregator Device) |
| [ 0.309262] ACPI: Added _OSI(Linux-Dell-Video) |
| [ 0.309317] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) |
| [ 0.309374] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) |
| [ 0.311376] ACPI: 2 ACPI AML tables successfully acquired and loaded |
| [ 0.312226] ACPI: EC: EC started |
| [ 0.312281] ACPI: EC: interrupt blocked |
| [ 0.312635] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC |
| [ 0.312985] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62 |
| [ 0.313054] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions |
| [ 0.313123] ACPI: Interpreter enabled |
| [ 0.313194] ACPI: (supports S0 S3 S4 S5) |
| [ 0.313250] ACPI: Using IOAPIC for interrupt routing |
| [ 0.313320] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| [ 0.313496] ACPI: Enabled 1 GPEs in block 00 to 3F |
| [ 0.313572] ACPI: Power Resource [FPWR] (off) |
| [ 0.313572] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) |
| [ 0.313609] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] |
| [ 0.313715] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] |
| [ 0.313792] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge |
| [ 0.313903] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff window] (conflicts with Video ROM [mem 0x000c0000-0x000cf1ff]) |
| [ 0.313980] acpi PNP0A08:00: ignoring host bridge window [mem 0x000d0000-0x000d3fff window] (conflicts with Adapter ROM [mem 0x000cf800-0x000d05ff]) |
| [ 0.314185] PCI host bridge to bus 0000:00 |
| [ 0.314241] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] |
| [ 0.314301] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] |
| [ 0.314361] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] |
| [ 0.314431] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] |
| [ 0.314498] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] |
| [ 0.314567] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] |
| [ 0.314636] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] |
| [ 0.314704] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] |
| [ 0.314773] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] |
| [ 0.314842] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] |
| [ 0.314911] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] |
| [ 0.314980] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window] |
| [ 0.315049] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window] |
| [ 0.315117] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window] |
| [ 0.315185] pci_bus 0000:00: root bus resource [mem 0x82a00000-0xefffffff window] |
| [ 0.315256] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] |
| [ 0.315324] pci_bus 0000:00: root bus resource [bus 00-ff] |
| [ 0.315386] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000 |
| [ 0.315460] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000 |
| [ 0.315469] pci 0000:00:02.0: reg 0x10: [mem 0xe1400000-0xe17fffff 64bit] |
| [ 0.315473] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref] |
| [ 0.315476] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f] |
| [ 0.315535] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000 |
| [ 0.315544] pci 0000:00:04.0: reg 0x10: [mem 0xe1b30000-0xe1b37fff 64bit] |
| [ 0.315626] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330 |
| [ 0.315650] pci 0000:00:14.0: reg 0x10: [mem 0xe1b20000-0xe1b2ffff 64bit] |
| [ 0.315716] pci 0000:00:14.0: PME# supported from D3hot D3cold |
| [ 0.315779] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000 |
| [ 0.315798] pci 0000:00:19.0: reg 0x10: [mem 0xe1b00000-0xe1b1ffff] |
| [ 0.315806] pci 0000:00:19.0: reg 0x14: [mem 0xe1b3c000-0xe1b3cfff] |
| [ 0.315813] pci 0000:00:19.0: reg 0x18: [io 0x3040-0x305f] |
| [ 0.315869] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold |
| [ 0.315928] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 |
| [ 0.315949] pci 0000:00:1a.0: reg 0x10: [mem 0xe1b3f000-0xe1b3f3ff] |
| [ 0.316029] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold |
| [ 0.316093] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300 |
| [ 0.316114] pci 0000:00:1b.0: reg 0x10: [mem 0xe1b38000-0xe1b3bfff 64bit] |
| [ 0.316183] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold |
| [ 0.316251] pci 0000:00:1c.0: [8086:1e12] type 01 class 0x060400 |
| [ 0.316387] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold |
| [ 0.316480] pci 0000:00:1c.1: [8086:1e14] type 01 class 0x060400 |
| [ 0.316643] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold |
| [ 0.316734] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 |
| [ 0.316755] pci 0000:00:1d.0: reg 0x10: [mem 0xe1b40000-0xe1b403ff] |
| [ 0.316834] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold |
| [ 0.316899] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100 |
| [ 0.317055] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601 |
| [ 0.317074] pci 0000:00:1f.2: reg 0x10: [io 0x3080-0x3087] |
| [ 0.317081] pci 0000:00:1f.2: reg 0x14: [io 0x3090-0x3093] |
| [ 0.317089] pci 0000:00:1f.2: reg 0x18: [io 0x3088-0x308f] |
| [ 0.317097] pci 0000:00:1f.2: reg 0x1c: [io 0x3094-0x3097] |
| [ 0.317105] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f] |
| [ 0.317112] pci 0000:00:1f.2: reg 0x24: [mem 0xe1b3e000-0xe1b3e7ff] |
| [ 0.317154] pci 0000:00:1f.2: PME# supported from D3hot |
| [ 0.317212] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500 |
| [ 0.317230] pci 0000:00:1f.3: reg 0x10: [mem 0xe1b41000-0xe1b410ff 64bit] |
| [ 0.317249] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f] |
| [ 0.317317] pci 0000:00:1f.6: [8086:1e24] type 00 class 0x118000 |
| [ 0.317340] pci 0000:00:1f.6: reg 0x10: [mem 0xe1b3d000-0xe1b3dfff 64bit] |
| [ 0.317553] pci 0000:01:00.0: [14e4:43a0] type 00 class 0x028000 |
| [ 0.317616] pci 0000:01:00.0: reg 0x10: [mem 0xe1a00000-0xe1a07fff 64bit] |
| [ 0.317644] pci 0000:01:00.0: reg 0x18: [mem 0xe1800000-0xe19fffff 64bit] |
| [ 0.317847] pci 0000:01:00.0: supports D1 D2 |
| [ 0.317848] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.318081] pci 0000:00:1c.0: PCI bridge to [bus 01] |
| [ 0.318146] pci 0000:00:1c.0: bridge window [mem 0xe1800000-0xe1afffff] |
| [ 0.318303] pci 0000:02:00.0: [1180:e822] type 00 class 0x080500 |
| [ 0.318342] pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz. |
| [ 0.318644] pci 0000:02:00.0: reg 0x10: [mem 0xe0800000-0xe08000ff] |
| [ 0.318946] pci 0000:02:00.0: supports D1 D2 |
| [ 0.318947] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.319174] pci 0000:00:1c.1: PCI bridge to [bus 02] |
| [ 0.319234] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff] |
| [ 0.319238] pci 0000:00:1c.1: bridge window [mem 0xe0000000-0xe08fffff] |
| [ 0.319246] pci 0000:00:1c.1: bridge window [mem 0xe0c00000-0xe13fffff 64bit pref] |
| [ 0.319372] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.319467] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.319560] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.319652] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.319745] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.319835] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.319927] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.320018] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.320980] ACPI: EC: interrupt unblocked |
| [ 0.320980] ACPI: EC: event unblocked |
| [ 0.320980] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62 |
| [ 0.320984] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events |
| [ 0.321099] pci 0000:00:02.0: vgaarb: setting as boot VGA device |
| [ 0.321099] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none |
| [ 0.321117] pci 0000:00:02.0: vgaarb: bridge control possible |
| [ 0.321174] vgaarb: loaded |
| [ 0.321271] pps_core: LinuxPPS API ver. 1 registered |
| [ 0.321328] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> |
| [ 0.321401] PTP clock support registered |
| [ 0.321461] EDAC MC: Ver: 3.0.0 |
| [ 0.324998] PCI: Using ACPI for IRQ routing |
| [ 0.326541] PCI: pci_cache_line_size set to 64 bytes |
| [ 0.327053] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] |
| [ 0.327054] e820: reserve RAM buffer [mem 0x7ff24000-0x7fffffff] |
| [ 0.327055] e820: reserve RAM buffer [mem 0x47b600000-0x47bffffff] |
| [ 0.327131] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 |
| [ 0.327131] hpet0: 8 comparators, 64-bit 14.318180 MHz counter |
| [ 0.328999] clocksource: Switched to clocksource tsc-early |
| [ 0.337084] VFS: Disk quotas dquot_6.6.0 |
| [ 0.337155] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) |
| [ 0.337299] AppArmor: AppArmor Filesystem Enabled |
| [ 0.337371] pnp: PnP ACPI init |
| [ 0.337557] pnp 00:00: [Firmware Bug]: PNP resource [mem 0xf0000000-0x12fffffff] covers only part of 0000:00:00.0 Intel MCH; extending to [mem 0xfed10000-0xfed17fff] |
| [ 0.337668] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved |
| [ 0.337729] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved |
| [ 0.337788] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved |
| [ 0.337848] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved |
| [ 0.337908] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved |
| [ 0.337965] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved |
| [ 0.338023] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved |
| [ 0.338083] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved |
| [ 0.338142] system 00:00: [mem 0x20000000-0x201fffff] could not be reserved |
| [ 0.338203] system 00:00: [mem 0x40000000-0x401fffff] could not be reserved |
| [ 0.338264] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) |
| [ 0.338646] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved |
| [ 0.338708] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) |
| [ 0.338737] system 00:02: [io 0x0500-0x057f] has been reserved |
| [ 0.338796] system 00:02: [io 0x0480-0x04bf] has been reserved |
| [ 0.338855] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) |
| [ 0.338870] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) |
| [ 0.338892] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) |
| [ 0.338913] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active) |
| [ 0.338931] pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active) |
| [ 0.338947] pnp: PnP ACPI: found 7 devices |
| [ 0.344483] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns |
| [ 0.344586] pci 0000:00:1c.0: PCI bridge to [bus 01] |
| [ 0.344650] pci 0000:00:1c.0: bridge window [mem 0xe1800000-0xe1afffff] |
| [ 0.344720] pci 0000:00:1c.1: PCI bridge to [bus 02] |
| [ 0.344779] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff] |
| [ 0.344843] pci 0000:00:1c.1: bridge window [mem 0xe0000000-0xe08fffff] |
| [ 0.344904] pci 0000:00:1c.1: bridge window [mem 0xe0c00000-0xe13fffff 64bit pref] |
| [ 0.344980] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] |
| [ 0.344985] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] |
| [ 0.344986] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] |
| [ 0.344987] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] |
| [ 0.344988] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window] |
| [ 0.344989] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window] |
| [ 0.344990] pci_bus 0000:00: resource 10 [mem 0x000d4000-0x000d7fff window] |
| [ 0.344991] pci_bus 0000:00: resource 11 [mem 0x000d8000-0x000dbfff window] |
| [ 0.344991] pci_bus 0000:00: resource 12 [mem 0x000dc000-0x000dffff window] |
| [ 0.344992] pci_bus 0000:00: resource 13 [mem 0x000e0000-0x000e3fff window] |
| [ 0.344993] pci_bus 0000:00: resource 14 [mem 0x000e4000-0x000e7fff window] |
| [ 0.344994] pci_bus 0000:00: resource 15 [mem 0x000e8000-0x000ebfff window] |
| [ 0.344995] pci_bus 0000:00: resource 16 [mem 0x000ec000-0x000effff window] |
| [ 0.344996] pci_bus 0000:00: resource 17 [mem 0x000f0000-0x000fffff window] |
| [ 0.344997] pci_bus 0000:00: resource 18 [mem 0x82a00000-0xefffffff window] |
| [ 0.344998] pci_bus 0000:00: resource 19 [mem 0xfed40000-0xfed44fff window] |
| [ 0.344999] pci_bus 0000:01: resource 1 [mem 0xe1800000-0xe1afffff] |
| [ 0.345000] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] |
| [ 0.345001] pci_bus 0000:02: resource 1 [mem 0xe0000000-0xe08fffff] |
| [ 0.345002] pci_bus 0000:02: resource 2 [mem 0xe0c00000-0xe13fffff 64bit pref] |
| [ 0.345067] NET: Registered protocol family 2 |
| [ 0.345255] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes) |
| [ 0.345365] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) |
| [ 0.345604] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) |
| [ 0.345767] TCP: Hash tables configured (established 131072 bind 65536) |
| [ 0.345856] UDP hash table entries: 8192 (order: 6, 262144 bytes) |
| [ 0.345947] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) |
| [ 0.346066] NET: Registered protocol family 1 |
| [ 0.346126] NET: Registered protocol family 44 |
| [ 0.346187] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] |
| [ 0.346873] PCI: CLS 64 bytes, default 64 |
| [ 0.346906] Unpacking initramfs... |
| [ 1.066610] Freeing initrd memory: 56628K |
| [ 1.097008] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) |
| [ 1.097084] software IO TLB: mapped [mem 0x7bf24000-0x7ff24000] (64MB) |
| [ 1.097685] Initialise system trusted keyrings |
| [ 1.097791] workingset: timestamp_bits=40 max_order=22 bucket_order=0 |
| [ 1.098859] zbud: loaded |
| [ 1.265348] Key type asymmetric registered |
| [ 1.265408] Asymmetric key parser 'x509' registered |
| [ 1.265478] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) |
| [ 1.265572] io scheduler mq-deadline registered |
| [ 1.265911] pcieport 0000:00:1c.0: Signaling PME with IRQ 26 |
| [ 1.266163] pcieport 0000:00:1c.1: Signaling PME with IRQ 27 |
| [ 1.266246] pciehp 0000:00:1c.1:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+ |
| [ 1.266434] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 |
| [ 1.266504] intel_idle: MWAIT substates: 0x21120 |
| [ 1.266505] intel_idle: v0.4.1 model 0x3A |
| [ 1.266689] intel_idle: lapic_timer_reliable_states 0xffffffff |
| [ 1.267196] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
| [ 1.267723] Linux agpgart interface v0.103 |
| [ 1.267819] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de> |
| [ 1.267877] AMD-Vi: AMD IOMMUv2 functionality not available on this system |
| [ 1.268183] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 |
| [ 1.269948] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| [ 1.270010] serio: i8042 AUX port at 0x60,0x64 irq 12 |
| [ 1.270201] mousedev: PS/2 mouse device common for all mice |
| [ 1.270293] rtc_cmos 00:03: RTC can wake from S4 |
| [ 1.270505] rtc_cmos 00:03: registered as rtc0 |
| [ 1.270572] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs |
| [ 1.270661] intel_pstate: Intel P-state driver initializing |
| [ 1.270894] ledtrig-cpu: registered to indicate activity on CPUs |
| [ 1.271511] NET: Registered protocol family 10 |
| [ 1.271645] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 |
| [ 1.287609] Segment Routing with IPv6 |
| [ 1.287718] mip6: Mobile IPv6 |
| [ 1.287784] NET: Registered protocol family 17 |
| [ 1.287941] mpls_gso: MPLS GSO support |
| [ 1.288522] microcode: sig=0x306a9, pf=0x10, revision=0x21 |
| [ 1.290368] microcode: Microcode Update Driver: v2.2. |
| [ 1.290388] sched_clock: Marking stable (1283043601, 7315701)->(1296093287, -5733985) |
| [ 1.290783] registered taskstats version 1 |
| [ 1.290838] Loading compiled-in X.509 certificates |
| [ 1.323386] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' |
| [ 1.323468] Loaded X.509 cert 'Debian Secure Boot Signer: 00a7468def' |
| [ 1.323544] zswap: loaded using pool lzo/zbud |
| [ 1.323664] AppArmor: AppArmor sha1 policy hashing enabled |
| [ 1.323971] rtc_cmos 00:03: setting system clock to 2019-08-03T09:42:55 UTC (1564825375) |
| [ 1.324627] Freeing unused kernel image memory: 1580K |
| [ 1.357074] Write protecting the kernel read-only data: 16384k |
| [ 1.358098] Freeing unused kernel image memory: 2036K |
| [ 1.358616] Freeing unused kernel image memory: 852K |
| [ 1.370919] x86/mm: Checked W+X mappings: passed, no W+X pages found. |
| [ 1.370978] x86/mm: Checking user space page tables |
| [ 1.376166] x86/mm: Checked W+X mappings: passed, no W+X pages found. |
| [ 1.376225] Run /init as init process |
| [ 1.481985] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:29/PNP0C09:00/PNP0C0E:00/input/input3 |
| [ 1.482116] ACPI: Sleep Button [SLPB] |
| [ 1.482219] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:29/PNP0C09:00/PNP0C0D:00/input/input4 |
| [ 1.482302] ACPI: Lid Switch [LID] |
| [ 1.482404] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5 |
| [ 1.482482] ACPI: Power Button [PWRF] |
| [ 1.503266] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k |
| [ 1.503329] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. |
| [ 1.503532] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode |
| [ 1.504474] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20181213/utaddress-213) |
| [ 1.504569] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 1.504644] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20181213/utaddress-213) |
| [ 1.504736] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 1.504798] thermal LNXTHERM:00: registered as thermal_zone0 |
| [ 1.504809] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20181213/utaddress-213) |
| [ 1.504867] ACPI: Thermal Zone [THM0] (54 C) |
| [ 1.504953] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 1.505094] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20181213/utaddress-213) |
| [ 1.505237] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 1.505367] lpc_ich: Resource conflict(s) found affecting gpio_ich |
| [ 1.516775] thermal LNXTHERM:01: registered as thermal_zone1 |
| [ 1.516839] ACPI: Thermal Zone [THM1] (27 C) |
| [ 1.527116] SCSI subsystem initialized |
| [ 1.528073] cryptd: max_cpu_qlen set to 1000 |
| [ 1.532765] ACPI: bus type USB registered |
| [ 1.532845] usbcore: registered new interface driver usbfs |
| [ 1.532913] usbcore: registered new interface driver hub |
| [ 1.532999] usbcore: registered new device driver usb |
| [ 1.533509] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt |
| [ 1.545402] xhci_hcd 0000:00:14.0: xHCI Host Controller |
| [ 1.545469] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 |
| [ 1.545984] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| [ 1.546595] xhci_hcd 0000:00:14.0: hcc params 0x200071a1 hci version 0x100 quirks 0x000000000000b930 |
| [ 1.546678] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported |
| [ 1.546717] ehci-pci: EHCI PCI platform driver |
| [ 1.551415] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00 |
| [ 1.551491] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.551563] usb usb1: Product: xHCI Host Controller |
| [ 1.551622] usb usb1: Manufacturer: Linux 5.0.0-trunk-amd64 xhci-hcd |
| [ 1.551683] usb usb1: SerialNumber: 0000:00:14.0 |
| [ 1.552439] hub 1-0:1.0: USB hub found |
| [ 1.552507] hub 1-0:1.0: 4 ports detected |
| [ 1.552729] xhci_hcd 0000:00:14.0: xHCI Host Controller |
| [ 1.552791] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 |
| [ 1.552794] ehci-pci 0000:00:1a.0: EHCI Host Controller |
| [ 1.552864] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed |
| [ 1.553060] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3 |
| [ 1.553143] ehci-pci 0000:00:1a.0: debug port 2 |
| [ 1.554094] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.00 |
| [ 1.554213] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.554324] usb usb2: Product: xHCI Host Controller |
| [ 1.554411] usb usb2: Manufacturer: Linux 5.0.0-trunk-amd64 xhci-hcd |
| [ 1.554502] usb usb2: SerialNumber: 0000:00:14.0 |
| [ 1.554690] hub 2-0:1.0: USB hub found |
| [ 1.554785] hub 2-0:1.0: 4 ports detected |
| [ 1.555167] libata version 3.00 loaded. |
| [ 1.557113] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported |
| [ 1.557206] ehci-pci 0000:00:1a.0: irq 19, io mem 0xe1b3f000 |
| [ 1.558768] ahci 0000:00:1f.2: version 3.0 |
| [ 1.558928] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled |
| [ 1.569084] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x17 impl SATA mode |
| [ 1.569161] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst |
| [ 1.570359] scsi host0: ahci |
| [ 1.571261] sdhci: Secure Digital Host Controller Interface driver |
| [ 1.571322] sdhci: Copyright(c) Pierre Ossman |
| [ 1.571914] scsi host1: ahci |
| [ 1.572154] scsi host2: ahci |
| [ 1.572835] scsi host3: ahci |
| [ 1.573063] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 |
| [ 1.573186] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00 |
| [ 1.573257] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.573327] usb usb3: Product: EHCI Host Controller |
| [ 1.573384] usb usb3: Manufacturer: Linux 5.0.0-trunk-amd64 ehci_hcd |
| [ 1.573444] usb usb3: SerialNumber: 0000:00:1a.0 |
| [ 1.573677] hub 3-0:1.0: USB hub found |
| [ 1.573793] hub 3-0:1.0: 3 ports detected |
| [ 1.574098] ehci-pci 0000:00:1d.0: EHCI Host Controller |
| [ 1.574162] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4 |
| [ 1.574242] ehci-pci 0000:00:1d.0: debug port 2 |
| [ 1.578201] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported |
| [ 1.578448] ehci-pci 0000:00:1d.0: irq 18, io mem 0xe1b40000 |
| [ 1.579501] AVX version of gcm_enc/dec engaged. |
| [ 1.579559] AES CTR mode by8 optimization enabled |
| [ 1.580426] sdhci-pci 0000:02:00.0: SDHCI controller found [1180:e822] (rev 7) |
| [ 1.580936] sdhci-pci 0000:02:00.0: Will use DMA mode even though HW doesn't fully claim to support it. |
| [ 1.581206] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes |
| [ 1.583833] scsi host4: ahci |
| [ 1.584163] mmc0: SDHCI controller on PCI [0000:02:00.0] using DMA |
| [ 1.585876] scsi host5: ahci |
| [ 1.586003] ata1: SATA max UDMA/133 abar m2048@0xe1b3e000 port 0xe1b3e100 irq 30 |
| [ 1.586074] ata2: SATA max UDMA/133 abar m2048@0xe1b3e000 port 0xe1b3e180 irq 30 |
| [ 1.586145] ata3: SATA max UDMA/133 abar m2048@0xe1b3e000 port 0xe1b3e200 irq 30 |
| [ 1.586215] ata4: DUMMY |
| [ 1.586270] ata5: SATA max UDMA/133 abar m2048@0xe1b3e000 port 0xe1b3e300 irq 30 |
| [ 1.586341] ata6: DUMMY |
| [ 1.592994] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 |
| [ 1.593179] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00 |
| [ 1.593252] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.593323] usb usb4: Product: EHCI Host Controller |
| [ 1.593383] usb usb4: Manufacturer: Linux 5.0.0-trunk-amd64 ehci_hcd |
| [ 1.593445] usb usb4: SerialNumber: 0000:00:1d.0 |
| [ 1.593637] hub 4-0:1.0: USB hub found |
| [ 1.593702] hub 4-0:1.0: 3 ports detected |
| [ 1.599882] [drm] Replacing VGA console driver |
| [ 1.600804] Console: switching to colour dummy device 80x25 |
| [ 1.651631] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). |
| [ 1.651640] [drm] Driver supports precise vblank timestamp query. |
| [ 1.651999] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem |
| [ 1.666994] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock |
| [ 1.713999] [drm] Initialized i915 1.6.0 20181204 for 0000:00:02.0 on minor 0 |
| [ 1.714215] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) |
| [ 1.749049] acpi device:0d: registered as cooling_device5 |
| [ 1.749126] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7 |
| [ 1.791862] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 3c:97:0e:46:56:66 |
| [ 1.791867] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection |
| [ 1.791922] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF |
| [ 1.792832] e1000e 0000:00:19.0 eno0: renamed from eth0 |
| [ 1.899399] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [ 1.900291] ata1.00: ATA-9: KINGSTON SKC400S37512G, SAFM001B, max UDMA/133 |
| [ 1.900327] ata1.00: 1000215216 sectors, multi 0: LBA48 NCQ (depth 32), AA |
| [ 1.900546] ata1.00: configured for UDMA/133 |
| [ 1.900921] scsi 0:0:0:0: Direct-Access ATA KINGSTON SKC400S 001B PQ: 0 ANSI: 5 |
| [ 1.913020] usb 3-1: new high-speed USB device number 2 using ehci-pci |
| [ 1.929026] usb 4-1: new high-speed USB device number 2 using ehci-pci |
| [ 1.949913] usb 2-3: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd |
| [ 2.048221] fbcon: inteldrmfb (fb0) is primary device |
| [ 2.077770] usb 3-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 |
| [ 2.077774] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 2.078145] hub 3-1:1.0: USB hub found |
| [ 2.078296] hub 3-1:1.0: 6 ports detected |
| [ 2.086105] usb 4-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 |
| [ 2.086108] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 2.086583] hub 4-1:1.0: USB hub found |
| [ 2.086760] hub 4-1:1.0: 8 ports detected |
| [ 2.094365] usb 2-3: New USB device found, idVendor=2109, idProduct=0813, bcdDevice= 2.21 |
| [ 2.094369] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 2.094371] usb 2-3: Product: USB3.0 Hub |
| [ 2.094372] usb 2-3: Manufacturer: VIA Labs, Inc. |
| [ 2.096830] hub 2-3:1.0: USB hub found |
| [ 2.097093] hub 2-3:1.0: 4 ports detected |
| [ 2.125057] tsc: Refined TSC clocksource calibration: 2893.425 MHz |
| [ 2.125073] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29b4fff0c46, max_idle_ns: 440795237523 ns |
| [ 2.125123] clocksource: Switched to clocksource tsc |
| [ 2.216180] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [ 2.217042] usb 1-3: new high-speed USB device number 2 using xhci_hcd |
| [ 2.243044] psmouse serio1: synaptics: queried max coordinates: x [..5470], y [..4498] |
| [ 2.253663] ata2.00: ATA-10: ST2000LM015-2E8174, SDM1, max UDMA/133 |
| [ 2.253666] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA |
| [ 2.303439] ata2.00: configured for UDMA/133 |
| [ 2.305301] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b1/0xb40000/0xa0000/0x0, board id: 0, fw id: 920262 |
| [ 2.305310] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0 |
| [ 2.313042] scsi 1:0:0:0: Direct-Access ATA ST2000LM015-2E81 SDM1 PQ: 0 ANSI: 5 |
| [ 2.344369] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6 |
| [ 2.365077] usb 3-1.3: new full-speed USB device number 3 using ehci-pci |
| [ 2.371250] usb 1-3: New USB device found, idVendor=2109, idProduct=2813, bcdDevice= 2.21 |
| [ 2.371254] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 2.371256] usb 1-3: Product: USB2.0 Hub |
| [ 2.371258] usb 1-3: Manufacturer: VIA Labs, Inc. |
| [ 2.372266] hub 1-3:1.0: USB hub found |
| [ 2.373046] hub 1-3:1.0: 4 ports detected |
| [ 2.377068] usb 4-1.5: new high-speed USB device number 3 using ehci-pci |
| [ 2.474751] usb 3-1.3: New USB device found, idVendor=147e, idProduct=2020, bcdDevice= 0.01 |
| [ 2.474754] usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 2.474756] usb 3-1.3: Product: Biometric Coprocessor |
| [ 2.474758] usb 3-1.3: Manufacturer: Auth |
| [ 2.485858] usb 4-1.5: New USB device found, idVendor=17ef, idProduct=100a, bcdDevice= 0.00 |
| [ 2.485862] usb 4-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 2.486423] hub 4-1.5:1.0: USB hub found |
| [ 2.486772] hub 4-1.5:1.0: 6 ports detected |
| [ 2.553052] usb 3-1.4: new full-speed USB device number 4 using ehci-pci |
| [ 2.628086] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) |
| [ 2.628498] ata3.00: supports DRM functions and may not be fully accessible |
| [ 2.628687] ata3.00: ATA-11: KINGSTON SUV500MS240G, 003056RI, max UDMA/133 |
| [ 2.628690] ata3.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 32), AA |
| [ 2.629440] ata3.00: Trusted Computing capability qword not valid! |
| [ 2.629893] ata3.00: supports DRM functions and may not be fully accessible |
| [ 2.630748] ata3.00: Trusted Computing capability qword not valid! |
| [ 2.630755] ata3.00: configured for UDMA/133 |
| [ 2.631309] scsi 2:0:0:0: Direct-Access ATA KINGSTON SUV500M 56RI PQ: 0 ANSI: 5 |
| [ 2.669815] usb 3-1.4: New USB device found, idVendor=0a5c, idProduct=21e6, bcdDevice= 1.12 |
| [ 2.669819] usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [ 2.669821] usb 3-1.4: Product: BCM20702A0 |
| [ 2.669823] usb 3-1.4: Manufacturer: Broadcom Corp |
| [ 2.669825] usb 3-1.4: SerialNumber: B8763FA9D32E |
| [ 2.749072] usb 3-1.6: new high-speed USB device number 5 using ehci-pci |
| [ 2.777027] usb 4-1.5.1: new full-speed USB device number 4 using ehci-pci |
| [ 2.849795] Console: switching to colour frame buffer device 200x67 |
| [ 2.865055] usb 3-1.6: New USB device found, idVendor=5986, idProduct=02d5, bcdDevice=10.11 |
| [ 2.865059] usb 3-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 2.865061] usb 3-1.6: Product: Integrated Camera |
| [ 2.865063] usb 3-1.6: Manufacturer: Ricoh Company Ltd. |
| [ 2.898575] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device |
| [ 2.900555] usb 4-1.5.1: New USB device found, idVendor=17ef, idProduct=604d, bcdDevice= 1.22 |
| [ 2.902098] usb 4-1.5.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0 |
| [ 2.903620] usb 4-1.5.1: Product: Lenovo USB Receiver |
| [ 2.910222] hidraw: raw HID events driver (C) Jiri Kosina |
| [ 2.919689] usbcore: registered new interface driver usbhid |
| [ 2.920824] usbhid: USB HID core driver |
| [ 2.923828] input: Lenovo USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.1/4-1.5.1:1.0/0003:17EF:604D.0001/input/input9 |
| [ 2.944159] ata5: SATA link down (SStatus 0 SControl 300) |
| [ 2.959820] sd 0:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/477 GiB) |
| [ 2.959828] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) |
| [ 2.961014] sd 0:0:0:0: [sda] Write Protect is off |
| [ 2.961044] sd 2:0:0:0: [sdc] 468862128 512-byte logical blocks: (240 GB/224 GiB) |
| [ 2.961045] sd 2:0:0:0: [sdc] 4096-byte physical blocks |
| [ 2.961052] sd 2:0:0:0: [sdc] Write Protect is off |
| [ 2.961054] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 |
| [ 2.961065] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 2.962301] sd 1:0:0:0: [sdb] 4096-byte physical blocks |
| [ 2.962308] sdc: sdc1 sdc2 sdc3 |
| [ 2.962592] sd 2:0:0:0: [sdc] Attached SCSI disk |
| [ 2.963405] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 |
| [ 2.964453] sd 1:0:0:0: [sdb] Write Protect is off |
| [ 2.965511] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 2.966835] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 |
| [ 2.975354] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 2.976801] sda: sda1 sda2 < sda5 > |
| [ 2.978458] sd 0:0:0:0: [sda] Attached SCSI disk |
| [ 2.985286] hid-generic 0003:17EF:604D.0001: input,hidraw0: USB HID v1.11 Keyboard [Lenovo USB Receiver] on usb-0000:00:1d.0-1.5.1/input0 |
| [ 2.985737] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 |
| [ 2.987337] input: Lenovo USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.1/4-1.5.1:1.1/0003:17EF:604D.0002/input/input10 |
| [ 2.990503] hid-generic 0003:17EF:604D.0002: input,hidraw1: USB HID v1.11 Mouse [Lenovo USB Receiver] on usb-0000:00:1d.0-1.5.1/input1 |
| [ 2.992030] input: Lenovo USB Receiver Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.1/4-1.5.1:1.2/0003:17EF:604D.0003/input/input11 |
| [ 2.992998] usb 4-1.5.6: new high-speed USB device number 5 using ehci-pci |
| [ 3.009384] sdb: sdb1 |
| [ 3.011080] sd 1:0:0:0: [sdb] Attached SCSI disk |
| [ 3.053038] input: Lenovo USB Receiver System Control as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.1/4-1.5.1:1.2/0003:17EF:604D.0003/input/input12 |
| [ 3.054197] input: Lenovo USB Receiver Keypad as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.1/4-1.5.1:1.2/0003:17EF:604D.0003/input/input13 |
| [ 3.055579] hid-generic 0003:17EF:604D.0003: input,hiddev0,hidraw2: USB HID v1.11 Keypad [Lenovo USB Receiver] on usb-0000:00:1d.0-1.5.1/input2 |
| [ 3.145891] usb 4-1.5.6: New USB device found, idVendor=0409, idProduct=005a, bcdDevice= 1.00 |
| [ 3.147067] usb 4-1.5.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 3.148573] hub 4-1.5.6:1.0: USB hub found |
| [ 3.150427] hub 4-1.5.6:1.0: 4 ports detected |
| [ 3.193063] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input8 |
| [ 3.368988] raid6: sse2x4 gen() 14338 MB/s |
| [ 3.408994] usb 4-1.5.2: new full-speed USB device number 6 using ehci-pci |
| [ 3.436983] raid6: sse2x4 xor() 9851 MB/s |
| [ 3.504985] raid6: sse2x2 gen() 10213 MB/s |
| [ 3.535803] usb 4-1.5.2: New USB device found, idVendor=04b4, idProduct=4042, bcdDevice= 1.03 |
| [ 3.537447] usb 4-1.5.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 3.541990] input: HID 04b4:4042 as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.2/4-1.5.2:1.0/0003:04B4:4042.0004/input/input14 |
| [ 3.572986] raid6: sse2x2 xor() 6604 MB/s |
| [ 3.601112] hid-generic 0003:04B4:4042.0004: input,hidraw3: USB HID v1.11 Keyboard [HID 04b4:4042] on usb-0000:00:1d.0-1.5.2/input0 |
| [ 3.606587] input: HID 04b4:4042 Mouse as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.2/4-1.5.2:1.1/0003:04B4:4042.0005/input/input15 |
| [ 3.608207] input: HID 04b4:4042 System Control as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.2/4-1.5.2:1.1/0003:04B4:4042.0005/input/input16 |
| [ 3.612993] usb 4-1.5.6.1: new high-speed USB device number 7 using ehci-pci |
| [ 3.640990] raid6: sse2x1 gen() 10088 MB/s |
| [ 3.669032] input: HID 04b4:4042 Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.2/4-1.5.2:1.1/0003:04B4:4042.0005/input/input17 |
| [ 3.670384] input: HID 04b4:4042 as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.2/4-1.5.2:1.1/0003:04B4:4042.0005/input/input18 |
| [ 3.671708] input: HID 04b4:4042 Keyboard as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.2/4-1.5.2:1.1/0003:04B4:4042.0005/input/input19 |
| [ 3.673098] hid-generic 0003:04B4:4042.0005: input,hiddev1,hidraw4: USB HID v1.11 Mouse [HID 04b4:4042] on usb-0000:00:1d.0-1.5.2/input1 |
| [ 3.708987] raid6: sse2x1 xor() 7493 MB/s |
| [ 3.710225] raid6: using algorithm sse2x4 gen() 14338 MB/s |
| [ 3.711459] raid6: .... xor() 9851 MB/s, rmw enabled |
| [ 3.712691] raid6: using ssse3x2 recovery algorithm |
| [ 3.714539] xor: automatically using best checksumming function avx |
| [ 3.716297] async_tx: api initialized (async) |
| [ 3.721801] usb 4-1.5.6.1: New USB device found, idVendor=0409, idProduct=005a, bcdDevice= 1.00 |
| [ 3.723781] usb 4-1.5.6.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 3.726694] hub 4-1.5.6.1:1.0: USB hub found |
| [ 3.729358] hub 4-1.5.6.1:1.0: 4 ports detected |
| [ 3.813035] usb 4-1.5.6.2: new high-speed USB device number 8 using ehci-pci |
| [ 3.888598] device-mapper: uevent: version 1.0.3 |
| [ 3.890183] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com |
| [ 3.926693] usb 4-1.5.6.2: New USB device found, idVendor=0409, idProduct=0058, bcdDevice= 1.00 |
| [ 3.929607] usb 4-1.5.6.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 3.932511] usb 4-1.5.6.2: Product: USB2.0 Hub Controller |
| [ 3.935412] usb 4-1.5.6.2: Manufacturer: NEC Corporation |
| [ 3.937669] hub 4-1.5.6.2:1.0: USB hub found |
| [ 3.939873] hub 4-1.5.6.2:1.0: 4 ports detected |
| [ 4.021089] usb 4-1.5.6.1.2: new full-speed USB device number 9 using ehci-pci |
| [ 4.140297] usb 4-1.5.6.1.2: New USB device found, idVendor=067b, idProduct=2305, bcdDevice= 2.02 |
| [ 4.143953] usb 4-1.5.6.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 4.146703] usb 4-1.5.6.1.2: Product: IEEE-1284 Controller |
| [ 4.149407] usb 4-1.5.6.1.2: Manufacturer: Prolific Technology Inc. |
| [ 4.213079] usb 4-1.5.6.4: new full-speed USB device number 10 using ehci-pci |
| [ 4.330891] usb 4-1.5.6.4: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=24.06 |
| [ 4.334561] usb 4-1.5.6.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 4.338140] usb 4-1.5.6.4: Product: USB Receiver |
| [ 4.339826] usb 4-1.5.6.4: Manufacturer: Logitech |
| [ 4.356614] logitech-djreceiver 0003:046D:C52B.0008: hiddev2,hidraw5: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.5.6.4/input2 |
| [ 4.405078] usb 4-1.5.6.1.3: new full-speed USB device number 11 using ehci-pci |
| [ 4.480441] input: Logitech Unifying Device. Wireless PID:400d Keyboard as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.6/4-1.5.6.4/4-1.5.6.4:1.2/0003:046D:C52B.0008/0003:046D:400D.0009/input/input20 |
| [ 4.488844] input: Logitech Unifying Device. Wireless PID:400d Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.6/4-1.5.6.4/4-1.5.6.4:1.2/0003:046D:C52B.0008/0003:046D:400D.0009/input/input21 |
| [ 4.491862] input: Logitech Unifying Device. Wireless PID:400d System Control as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.6/4-1.5.6.4/4-1.5.6.4:1.2/0003:046D:C52B.0008/0003:046D:400D.0009/input/input22 |
| [ 4.494743] hid-generic 0003:046D:400D.0009: input,hidraw6: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:400d] on usb-0000:00:1d.0-1.5.6.4:2 |
| [ 4.518929] usb 4-1.5.6.1.3: New USB device found, idVendor=067b, idProduct=2303, bcdDevice= 4.00 |
| [ 4.522824] usb 4-1.5.6.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 4.526674] usb 4-1.5.6.1.3: Product: USB-Serial Controller D |
| [ 4.530521] usb 4-1.5.6.1.3: Manufacturer: Prolific Technology Inc. |
| [ 4.612198] input: Logitech K230 as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.6/4-1.5.6.4/4-1.5.6.4:1.2/0003:046D:C52B.0008/0003:046D:400D.0009/input/input26 |
| [ 4.616597] logitech-hidpp-device 0003:046D:400D.0009: input,hidraw6: USB HID v1.11 Keyboard [Logitech K230] on usb-0000:00:1d.0-1.5.6.4:2 |
| [ 16.959840] NET: Registered protocol family 38 |
| [ 17.088502] device-mapper: crypt: xts(aes) using implementation "xts-aes-aesni" |
| [ 17.338470] PM: Image not found (code -22) |
| [ 17.343252] PM: Marking nosave pages: [mem 0x00000000-0x00000fff] |
| [ 17.343255] PM: Marking nosave pages: [mem 0x0009f000-0x000fffff] |
| [ 17.343257] PM: Marking nosave pages: [mem 0x7ff24000-0xffffffff] |
| [ 17.344695] PM: Basic memory bitmaps created |
| [ 17.345485] PM: Basic memory bitmaps freed |
| [ 17.346401] video LNXVIDEO:00: Restoring backlight state |
| [ 17.499809] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) |
| [ 17.720900] systemd[1]: Inserted module 'autofs4' |
| [ 17.745106] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid) |
| [ 17.769265] systemd[1]: Detected architecture x86-64. |
| [ 17.779345] systemd[1]: Set hostname to <TP-T430s>. |
| [ 17.895068] systemd[1]: /lib/systemd/system/thinkfan.service:8: PIDFile= references path below legacy directory /var/run/, updating /var/run/thinkfan.pid → /run/thinkfan.pid; please update the unit file accordingly. |
| [ 17.898275] systemd[1]: /etc/systemd/system/teamviewerd.service:8: PIDFile= references path below legacy directory /var/run/, updating /var/run/teamviewerd.pid → /run/teamviewerd.pid; please update the unit file accordingly. |
| [ 17.917111] systemd[1]: /lib/systemd/system/fancontrol.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/fancontrol.pid → /run/fancontrol.pid; please update the unit file accordingly. |
| [ 17.927782] systemd[1]: /etc/systemd/system/anydesk.service:8: PIDFile= references path below legacy directory /var/run/, updating /var/run/anydesk.pid → /run/anydesk.pid; please update the unit file accordingly. |
| [ 17.953693] systemd[1]: Reached target User and Group Name Lookups. |
| [ 17.956026] systemd[1]: Listening on Journal Socket (/dev/log). |
| [ 17.963059] systemd[1]: Listening on Journal Audit Socket. |
| [ 18.045637] loop: module loaded |
| [ 18.055514] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro |
| [ 18.065735] lp: driver loaded but no devices found |
| [ 18.073031] ppdev: user-space parallel port driver |
| [ 18.309211] ACPI: AC Adapter [AC] (on-line) |
| [ 18.323502] battery: ACPI: Battery Slot [BAT0] (battery present) |
| [ 18.325116] battery: ACPI: Battery Slot [BAT1] (battery absent) |
| [ 18.358382] Non-volatile memory driver v1.3 |
| [ 18.362854] tpm_tis 00:06: 1.2 TPM (device-id 0x0, rev-id 78) |
| [ 18.392450] thinkpad_acpi: ThinkPad ACPI Extras v0.26 |
| [ 18.393750] thinkpad_acpi: http://ibm-acpi.sf.net/ |
| [ 18.393750] thinkpad_acpi: ThinkPad BIOS CBET4000 4.10-155-g3f98d41b6e, EC G7HT39WW-3.22 |
| [ 18.393751] thinkpad_acpi: Lenovo ThinkPad T430s, model 23532NU |
| [ 18.400711] thinkpad_acpi: radio switch found; radios are enabled |
| [ 18.402327] thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode |
| [ 18.403647] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver |
| [ 18.405021] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... |
| [ 18.409472] iTCO_vendor_support: vendor-support=0 |
| [ 18.410363] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked |
| [ 18.412468] sd 0:0:0:0: Attached scsi generic sg0 type 0 |
| [ 18.413151] thinkpad_acpi: rfkill switch tpacpi_wwan_sw: radio is unblocked |
| [ 18.415444] sd 1:0:0:0: Attached scsi generic sg1 type 0 |
| [ 18.416793] systemd-journald[472]: Received request to flush runtime journal from PID 1 |
| [ 18.417281] sd 2:0:0:0: Attached scsi generic sg2 type 0 |
| [ 18.427211] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 |
| [ 18.428878] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560) |
| [ 18.430858] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) |
| [ 18.432821] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one |
| [ 18.434299] thinkpad_acpi: Console audio control enabled, mode: monitor (read only) |
| [ 18.437162] thinkpad_acpi: battery 1 registered (start 0, stop 100) |
| [ 18.437166] battery: new extension: ThinkPad Battery Extension |
| [ 18.440076] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input27 |
| [ 18.467838] snd_hda_intel 0000:00:1b.0: Linked as a consumer to 0000:00:02.0 |
| [ 18.469363] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) |
| [ 18.507411] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker |
| [ 18.508940] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) |
| [ 18.510448] snd_hda_codec_realtek hdaudioC0D0: hp_outs=2 (0x15/0x1b/0x0/0x0/0x0) |
| [ 18.511925] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 |
| [ 18.513442] snd_hda_codec_realtek hdaudioC0D0: inputs: |
| [ 18.514923] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18 |
| [ 18.516375] snd_hda_codec_realtek hdaudioC0D0: Dock Mic=0x19 |
| [ 18.517873] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12 |
| [ 18.525737] wl: loading out-of-tree module taints kernel. |
| [ 18.527120] wl: module license 'MIXED/Proprietary' taints kernel. |
| [ 18.528487] Disabling lock debugging due to kernel taint |
| [ 18.532699] wl: module verification failed: signature and/or required key missing - tainting kernel |
| [ 18.536540] input: PC Speaker as /devices/platform/pcspkr/input/input33 |
| [ 18.543052] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input28 |
| [ 18.544969] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input29 |
| [ 18.546625] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input30 |
| [ 18.548238] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input31 |
| [ 18.549887] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input32 |
| [ 18.551640] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input34 |
| [ 18.553543] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input35 |
| [ 18.554665] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input36 |
| [ 18.565241] wlan0: Broadcom BCM43a0 802.11 Hybrid Wireless Controller 6.30.223.271 (r587334) |
| |
| [ 18.588535] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer |
| [ 18.590119] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules |
| [ 18.591680] RAPL PMU: hw unit of domain package 2^-16 Joules |
| [ 18.593234] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules |
| [ 18.663063] intel_rapl: Found RAPL domain package |
| [ 18.664563] intel_rapl: Found RAPL domain core |
| [ 18.666106] intel_rapl: Found RAPL domain uncore |
| [ 18.851900] wl 0000:01:00.0 wlp1s0: renamed from wlan0 |
| [ 18.957087] Adding 16699388k swap on /dev/mapper/TP--T430s--vg-swap_1. Priority:-2 extents:1 across:16699388k SSFS |
| [ 18.996508] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem |
| [ 19.002437] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null) |
| [ 19.149902] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) |
| [ 19.204706] audit: type=1400 audit(1564825393.373:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1438 comm="apparmor_parser" |
| [ 19.205929] audit: type=1400 audit(1564825393.373:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1438 comm="apparmor_parser" |
| [ 19.207016] audit: type=1400 audit(1564825393.373:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1438 comm="apparmor_parser" |
| [ 19.208042] audit: type=1400 audit(1564825393.373:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="system_tor" pid=1440 comm="apparmor_parser" |
| [ 19.209075] audit: type=1400 audit(1564825393.373:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=1437 comm="apparmor_parser" |
| [ 19.210144] audit: type=1400 audit(1564825393.377:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/freshclam" pid=1443 comm="apparmor_parser" |
| [ 19.211451] audit: type=1400 audit(1564825393.381:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/mysqld" pid=1439 comm="apparmor_parser" |
| [ 19.213476] audit: type=1400 audit(1564825393.385:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/haveged" pid=1445 comm="apparmor_parser" |
| [ 19.214815] audit: type=1400 audit(1564825393.385:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ioquake3" pid=1442 comm="apparmor_parser" |
| [ 19.216070] audit: type=1400 audit(1564825393.385:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ioquake3//popup" pid=1442 comm="apparmor_parser" |
| [ 19.409086] Process accounting resumed |
| [ 20.643995] media: Linux media interface: v0.10 |
| [ 20.672107] videodev: Linux video capture interface: v2.00 |
| [ 20.724432] alg: No test for fips(ansi_cprng) (fips_ansi_cprng) |
| [ 20.773937] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:02d5) |
| [ 20.779724] Bluetooth: Core ver 2.22 |
| [ 20.780586] NET: Registered protocol family 31 |
| [ 20.781425] Bluetooth: HCI device and connection manager initialized |
| [ 20.782233] Bluetooth: HCI socket layer initialized |
| [ 20.783125] Bluetooth: L2CAP socket layer initialized |
| [ 20.784076] Bluetooth: SCO socket layer initialized |
| [ 20.785474] uvcvideo 3-1.6:1.0: Entity type for entity Extension 4 was not initialized! |
| [ 20.786417] uvcvideo 3-1.6:1.0: Entity type for entity Extension 3 was not initialized! |
| [ 20.787552] uvcvideo 3-1.6:1.0: Entity type for entity Processing 2 was not initialized! |
| [ 20.788450] uvcvideo 3-1.6:1.0: Entity type for entity Camera 1 was not initialized! |
| [ 20.789498] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.6/3-1.6:1.0/input/input37 |
| [ 20.790580] usbcore: registered new interface driver uvcvideo |
| [ 20.791719] USB Video Class driver (1.1.1) |
| [ 20.800385] usbcore: registered new interface driver btusb |
| [ 20.879102] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 |
| [ 20.879941] Bluetooth: BNEP filters: protocol multicast |
| [ 20.881398] Bluetooth: BNEP socket layer initialized |
| [ 20.911448] Bluetooth: hci0: BCM: chip id 63 |
| [ 20.912458] Bluetooth: hci0: BCM: features 0x07 |
| [ 20.928435] Bluetooth: hci0: TP-T430s |
| [ 20.932426] Bluetooth: hci0: BCM20702A1 (001.002.014) build 1669 |
| [ 20.938236] bluetooth hci0: firmware: direct-loading firmware brcm/BCM20702A1-0a5c-21e6.hcd |
| [ 21.819464] Bluetooth: hci0: BCM20702A1 (001.002.014) build 1669 |
| [ 21.835440] Bluetooth: hci0: Broadcom Bluetooth Device |
| [ 22.593624] usblp 4-1.5.6.1.2:1.0: usblp3: USB Bidirectional printer dev 9 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 |
| [ 22.594581] usbcore: registered new interface driver usblp |
| [ 22.608755] usbcore: registered new interface driver usbserial_generic |
| [ 22.608768] usbserial: USB Serial support registered for generic |
| [ 22.613866] usbcore: registered new interface driver pl2303 |
| [ 22.613878] usbserial: USB Serial support registered for pl2303 |
| [ 22.613911] pl2303 4-1.5.6.1.3:1.0: pl2303 converter detected |
| [ 22.618587] usb 4-1.5.6.1.3: pl2303 converter now attached to ttyUSB0 |
| [ 23.294298] Bluetooth: RFCOMM TTY layer initialized |
| [ 23.294308] Bluetooth: RFCOMM socket layer initialized |
| [ 23.294316] Bluetooth: RFCOMM ver 1.11 |
| [ 23.574994] e1000e: eno0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None |
| [ 23.575029] IPv6: ADDRCONF(NETDEV_CHANGE): eno0: link becomes ready |
| [ 29.015091] e1000e: eno0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None |
| [ 33.333089] vboxdrv: Found 4 processor cores |
| [ 33.353198] vboxdrv: TSC mode is Invariant, tentative frequency 2893413565 Hz |
| [ 33.353201] vboxdrv: Successfully loaded version 6.0.10_Debian (interface 0x00290008) |
| [ 33.367780] VBoxNetFlt: Successfully started. |
| [ 33.377797] VBoxNetAdp: Successfully started. |
| [ 33.388325] VBoxPciLinuxInit |
| [ 33.393644] vboxpci: IOMMU not found (not registered) |
| [ 33.813007] kauditd_printk_skb: 26 callbacks suppressed |
| [ 33.813009] audit: type=1400 audit(1564825407.981:38): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=3041 comm="apparmor_parser" |
| [ 33.957035] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. |
| [ 33.958982] Bridge firewalling registered |
| [ 34.212709] Initializing XFRM netlink socket |
| [ 35.370402] audit: type=1400 audit(1564825409.541:39): apparmor="DENIED" operation="open" profile="/usr/sbin/cups-browsed" name="/usr/share/cups/locale/" pid=1680 comm="cups-browsed" requested_mask="r" denied_mask="r" fsuid=0 ouid=0 |
| [ 35.370417] audit: type=1400 audit(1564825409.541:40): apparmor="DENIED" operation="open" profile="/usr/sbin/cups-browsed" name="/usr/share/locale/" pid=1680 comm="cups-browsed" requested_mask="r" denied_mask="r" fsuid=0 ouid=0 |
| [ 39.529233] usb 3-1.3: usbfs: interface 0 claimed by usbfs while 'FingerprintDevi' sets config #1 |
| [ 40.461370] usb 3-1.3: usbfs: interface 0 claimed by usbfs while 'FingerprintDevi' sets config #1 |
| [ 41.393189] usb 3-1.3: usbfs: interface 0 claimed by usbfs while 'FingerprintDevi' sets config #1 |
| [ 42.321189] usb 3-1.3: usbfs: interface 0 claimed by usbfs while 'FingerprintDevi' sets config #1 |
| [ 43.253363] usb 3-1.3: usbfs: interface 0 claimed by usbfs while 'FingerprintDevi' sets config #1 |
| [ 44.185334] usb 3-1.3: usbfs: interface 0 claimed by usbfs while 'FingerprintDevi' sets config #1 |
| [ 46.313486] fuse init (API version 7.28) |
| [ 48.427868] rfkill: input handler disabled |
| [ 49.312430] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready |
| [ 84.873510] audit: type=1400 audit(1564825459.045:41): apparmor="DENIED" operation="open" profile="/usr/lib/telepathy/telepathy-*" name="/sys/devices/system/node/" pid=7320 comm="telepathy-haze" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 |
| [ 85.052127] audit: type=1400 audit(1564825459.221:42): apparmor="DENIED" operation="open" profile="/usr/lib/telepathy/telepathy-*" name="/usr/share/perl/5.28.1/strict.pm" pid=7320 comm="telepathy-haze" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0 |
| [ 207.025338] SGI XFS with ACLs, security attributes, realtime, no debug enabled |
| [ 207.038665] JFS: nTxBlock = 8192, nTxLock = 65536 |
| [ 207.061082] ntfs: driver 2.1.32 [Flags: R/O MODULE]. |
| [ 207.086920] QNX4 filesystem 0.2.3 registered. |
| [ 207.161025] Btrfs loaded, crc32c=crc32c-intel |
| [ 358.044808] e1000e: eno0 NIC Link is Down |
| [ 358.232171] PM: suspend entry (deep) |
| [ 358.232176] PM: Syncing filesystems ... done. |
| [ 358.240169] (NULL device *): firmware: direct-loading firmware brcm/BCM20702A1-0a5c-21e6.hcd |
| [ 358.240214] Freezing user space processes ... (elapsed 0.001 seconds) done. |
| [ 358.242131] OOM killer disabled. |
| [ 358.242132] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. |
| [ 358.243262] printk: Suspending console(s) (use no_console_suspend to debug) |
| [ 358.261078] sd 2:0:0:0: [sdc] Synchronizing SCSI cache |
| [ 358.261801] sd 2:0:0:0: [sdc] Stopping disk |
| [ 358.389109] sd 1:0:0:0: [sdb] Synchronizing SCSI cache |
| [ 358.389355] sd 1:0:0:0: [sdb] Stopping disk |
| [ 358.397097] sd 0:0:0:0: [sda] Synchronizing SCSI cache |
| [ 358.399489] sd 0:0:0:0: [sda] Stopping disk |
| [ 358.577402] e1000e: EEE TX LPI TIMER: 00000011 |
| [ 359.341945] ACPI: EC: interrupt blocked |
| [ 359.385518] ACPI: Preparing to enter system sleep state S3 |
| [ 359.388602] ACPI: EC: event blocked |
| [ 359.388603] ACPI: EC: EC stopped |
| [ 359.388604] PM: Saving platform NVS memory |
| [ 359.388605] Disabling non-boot CPUs ... |
| [ 359.390858] smpboot: CPU 1 is now offline |
| [ 359.395311] IRQ 31: no longer affine to CPU2 |
| [ 359.396902] smpboot: CPU 2 is now offline |
| [ 359.401419] IRQ 17: no longer affine to CPU3 |
| [ 359.401426] IRQ 26: no longer affine to CPU3 |
| [ 359.401430] IRQ 27: no longer affine to CPU3 |
| [ 359.402463] smpboot: CPU 3 is now offline |
| [ 359.408006] ACPI: Low-level resume complete |
| [ 359.408043] ACPI: EC: EC started |
| [ 359.408044] PM: Restoring platform NVS memory |
| [ 359.408363] Enabling non-boot CPUs ... |
| [ 359.408400] x86: Booting SMP configuration: |
| [ 359.408401] smpboot: Booting Node 0 Processor 1 APIC 0x1 |
| [ 359.410974] cache: parent cpu1 should not be sleeping |
| [ 359.411496] CPU1 is up |
| [ 359.411521] smpboot: Booting Node 0 Processor 2 APIC 0x2 |
| [ 359.413960] cache: parent cpu2 should not be sleeping |
| [ 359.414427] CPU2 is up |
| [ 359.414465] smpboot: Booting Node 0 Processor 3 APIC 0x3 |
| [ 359.416898] cache: parent cpu3 should not be sleeping |
| [ 359.417330] CPU3 is up |
| [ 359.420817] ACPI: Waking up from system sleep state S3 |
| [ 359.423754] ACPI: EC: interrupt unblocked |
| [ 359.443062] sdhci-pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz. |
| [ 359.464658] ACPI: EC: event unblocked |
| [ 359.467011] ACPI: button: The lid device is not compliant to SW_LID. |
| [ 359.472421] sd 0:0:0:0: [sda] Starting disk |
| [ 359.472441] sd 1:0:0:0: [sdb] Starting disk |
| [ 359.472448] sd 2:0:0:0: [sdc] Starting disk |
| [ 359.577318] usb 2-3: Disable of device-initiated U1 failed. |
| [ 359.580795] usb 2-3: Disable of device-initiated U2 failed. |
| [ 359.718345] usb 3-1.6: reset high-speed USB device number 5 using ehci-pci |
| [ 359.718353] usb 4-1.5: reset high-speed USB device number 3 using ehci-pci |
| [ 359.771452] usb 2-3: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd |
| [ 359.776557] ata5: SATA link down (SStatus 0 SControl 300) |
| [ 359.776595] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [ 359.776617] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) |
| [ 359.777037] ata3.00: supports DRM functions and may not be fully accessible |
| [ 359.777817] ata1.00: configured for UDMA/133 |
| [ 359.777925] ata3.00: Trusted Computing capability qword not valid! |
| [ 359.778369] ata3.00: supports DRM functions and may not be fully accessible |
| [ 359.779195] ata3.00: Trusted Computing capability qword not valid! |
| [ 359.779202] ata3.00: configured for UDMA/133 |
| [ 359.910488] usb 3-1.4: reset full-speed USB device number 4 using ehci-pci |
| [ 359.982412] sdhci-pci 0000:02:00.0: Will use DMA mode even though HW doesn't fully claim to support it. |
| [ 359.982695] sdhci-pci 0000:02:00.0: Will use DMA mode even though HW doesn't fully claim to support it. |
| [ 360.038769] usb 1-3: reset high-speed USB device number 2 using xhci_hcd |
| [ 360.126443] usb 4-1.5.6: reset high-speed USB device number 5 using ehci-pci |
| [ 360.179253] psmouse serio1: synaptics: queried max coordinates: x [..5470], y [..4498] |
| [ 360.314485] usb 4-1.5.1: reset full-speed USB device number 4 using ehci-pci |
| [ 360.431148] input input9: event field not found |
| [ 360.431152] input input9: event field not found |
| [ 360.431155] input input9: event field not found |
| [ 360.431157] input input9: event field not found |
| [ 360.431159] input input9: event field not found |
| [ 360.431161] input input9: event field not found |
| [ 360.431163] input input9: event field not found |
| [ 360.431165] input input9: event field not found |
| [ 360.502487] usb 4-1.5.2: reset full-speed USB device number 6 using ehci-pci |
| [ 360.690481] usb 4-1.5.6.4: reset full-speed USB device number 10 using ehci-pci |
| [ 360.878473] usb 4-1.5.6.2: reset high-speed USB device number 8 using ehci-pci |
| [ 361.066459] usb 4-1.5.6.1: reset high-speed USB device number 7 using ehci-pci |
| [ 361.474461] usb 4-1.5.6.1.2: reset full-speed USB device number 9 using ehci-pci |
| [ 361.585430] usblp3: removed |
| [ 361.662488] usb 4-1.5.6.1.3: reset full-speed USB device number 11 using ehci-pci |
| [ 361.772008] pl2303 ttyUSB0: pl2303 converter now disconnected from ttyUSB0 |
| [ 361.772046] pl2303 4-1.5.6.1.3:1.0: device disconnected |
| [ 361.772740] OOM killer enabled. |
| [ 361.772744] Restarting tasks ... done. |
| [ 361.779077] pl2303 4-1.5.6.1.3:1.0: pl2303 converter detected |
| [ 361.785492] usb 4-1.5.6.1.3: pl2303 converter now attached to ttyUSB0 |
| [ 361.804387] video LNXVIDEO:00: Restoring backlight state |
| [ 361.827782] PM: suspend exit |
| [ 361.906419] mmc0: new SD card at address 80ca |
| [ 361.957013] mmcblk0: mmc0:80ca SD256 241 MiB |
| [ 361.961335] mmcblk0: p1 |
| [ 362.426376] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [ 362.513131] ata2.00: configured for UDMA/133 |
| [ 363.080083] ERROR @wl_cfg80211_scan : |
| [ 363.080085] WLC_SCAN error (-22) |
| [ 365.576404] e1000e: eno0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None |
| [ 365.576450] IPv6: ADDRCONF(NETDEV_CHANGE): eno0: link becomes ready |
| [ 366.010067] ERROR @wl_cfg80211_scan : |
| [ 366.010070] WLC_SCAN error (-22) |
| [ 366.833877] usblp 4-1.5.6.1.2:1.0: usblp3: USB Bidirectional printer dev 9 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 |
| [ 367.077091] Bluetooth: hci0: BCM: chip id 63 |
| [ 367.078101] Bluetooth: hci0: BCM: features 0x07 |
| [ 367.094068] Bluetooth: hci0: BCM20702A |
| [ 367.095062] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000 |
| [ 367.965034] Bluetooth: hci0: BCM20702A1 (001.002.014) build 1669 |
| [ 367.981030] Bluetooth: hci0: Broadcom Bluetooth Device |
| [ 370.980394] e1000e: eno0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None |
| [ 393.403258] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready |
| [ 398.574380] thinkpad_acpi: fan watchdog: enabling fan |