| [ 0.000000] Linux version 5.3.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 9.2.1 20191008 (Debian 9.2.1-9)) #1 SMP Debian 5.3.7-1 (2019-10-19) |
| [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-5.3.0-1-amd64 root=/dev/mapper/TP--T430s--vg-root ro iomem=relaxed |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' |
| [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 |
| [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. |
| [ 0.000000] BIOS-provided physical RAM map: |
| [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ff24fff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000007ff25000-0x00000000829fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000047b5fffff] usable |
| [ 0.000000] NX (Execute Disable) protection: active |
| [ 0.000000] SMBIOS 2.8 present. |
| [ 0.000000] DMI: LENOVO 23532NU/23532NU, BIOS CBET4000 4.10-1264-gd276008b2a 10/30/2019 |
| [ 0.000000] tsc: Fast TSC calibration using PIT |
| [ 0.000000] tsc: Detected 2893.309 MHz processor |
| [ 0.002030] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| [ 0.002031] e820: remove [mem 0x000a0000-0x000fffff] usable |
| [ 0.002035] last_pfn = 0x47b600 max_arch_pfn = 0x400000000 |
| [ 0.002039] MTRR default type: write-back |
| [ 0.002039] MTRR fixed ranges enabled: |
| [ 0.002040] 00000-9FFFF write-back |
| [ 0.002041] A0000-BFFFF uncachable |
| [ 0.002042] C0000-FFFFF write-back |
| [ 0.002042] MTRR variable ranges enabled: |
| [ 0.002043] 0 base 080000000 mask FC0000000 uncachable |
| [ 0.002044] 1 base 0C0000000 mask FF0000000 uncachable |
| [ 0.002045] 2 base 0D0000000 mask FF0000000 write-combining |
| [ 0.002046] 3 base 0E0000000 mask FE0000000 uncachable |
| [ 0.002046] 4 disabled |
| [ 0.002047] 5 disabled |
| [ 0.002047] 6 disabled |
| [ 0.002047] 7 disabled |
| [ 0.002048] 8 disabled |
| [ 0.002048] 9 disabled |
| [ 0.002323] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT |
| [ 0.002686] last_pfn = 0x7ff25 max_arch_pfn = 0x400000000 |
| [ 0.012021] BRK [0x57201000, 0x57201fff] PGTABLE |
| [ 0.012023] BRK [0x57202000, 0x57202fff] PGTABLE |
| [ 0.012024] BRK [0x57203000, 0x57203fff] PGTABLE |
| [ 0.012054] BRK [0x57204000, 0x57204fff] PGTABLE |
| [ 0.012056] BRK [0x57205000, 0x57205fff] PGTABLE |
| [ 0.012208] BRK [0x57206000, 0x57206fff] PGTABLE |
| [ 0.012220] BRK [0x57207000, 0x57207fff] PGTABLE |
| [ 0.012232] BRK [0x57208000, 0x57208fff] PGTABLE |
| [ 0.012243] BRK [0x57209000, 0x57209fff] PGTABLE |
| [ 0.012255] BRK [0x5720a000, 0x5720afff] PGTABLE |
| [ 0.012267] BRK [0x5720b000, 0x5720bfff] PGTABLE |
| [ 0.012279] BRK [0x5720c000, 0x5720cfff] PGTABLE |
| [ 0.012376] RAMDISK: [mem 0x30f35000-0x34791fff] |
| [ 0.012382] ACPI: Early table checksum verification disabled |
| [ 0.012385] ACPI: RSDP 0x00000000000F6770 000024 (v02 COREv4) |
| [ 0.012389] ACPI: XSDT 0x000000007FF4B0E0 00005C (v01 COREv4 COREBOOT 00000000 CORE 20190703) |
| [ 0.012393] ACPI: FACP 0x000000007FF4EBC0 0000F4 (v04 COREv4 COREBOOT 00000000 CORE 20190703) |
| [ 0.012398] ACPI: DSDT 0x000000007FF4B280 003931 (v02 COREv4 COREBOOT 20110725 INTL 20190703) |
| [ 0.012401] ACPI: FACS 0x000000007FF4B240 000040 |
| [ 0.012403] ACPI: FACS 0x000000007FF4B240 000040 |
| [ 0.012405] ACPI: SSDT 0x000000007FF4ECC0 001B03 (v02 COREv4 COREBOOT 0000002A CORE 20190703) |
| [ 0.012408] ACPI: MCFG 0x000000007FF507D0 00003C (v01 COREv4 COREBOOT 00000000 CORE 20190703) |
| [ 0.012410] ACPI: TCPA 0x000000007FF50810 000032 (v02 COREv4 COREBOOT 00000000 CORE 20190703) |
| [ 0.012413] ACPI: APIC 0x000000007FF50850 00006C (v02 COREv4 COREBOOT 00000000 CORE 20190703) |
| [ 0.012415] ACPI: DMAR 0x000000007FF508C0 0000D0 (v01 COREv4 COREBOOT 00000000 CORE 20190703) |
| [ 0.012418] ACPI: HPET 0x000000007FF52990 000038 (v01 COREv4 COREBOOT 00000000 CORE 20190703) |
| [ 0.012425] ACPI: Local APIC address 0xfee00000 |
| [ 0.012496] No NUMA configuration found |
| [ 0.012497] Faking a node at [mem 0x0000000000000000-0x000000047b5fffff] |
| [ 0.012501] NODE_DATA(0) allocated [mem 0x47b5f3000-0x47b5f7fff] |
| [ 0.012530] Zone ranges: |
| [ 0.012531] DMA [mem 0x0000000000001000-0x0000000000ffffff] |
| [ 0.012532] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] |
| [ 0.012533] Normal [mem 0x0000000100000000-0x000000047b5fffff] |
| [ 0.012534] Device empty |
| [ 0.012535] Movable zone start for each node |
| [ 0.012536] Early memory node ranges |
| [ 0.012537] node 0: [mem 0x0000000000001000-0x000000000009efff] |
| [ 0.012538] node 0: [mem 0x0000000000100000-0x000000007ff24fff] |
| [ 0.012539] node 0: [mem 0x0000000100000000-0x000000047b5fffff] |
| [ 0.012549] Zeroed struct page in unavailable ranges: 317 pages |
| [ 0.012550] Initmem setup node 0 [mem 0x0000000000001000-0x000000047b5fffff] |
| [ 0.012551] On node 0 totalpages: 4175043 |
| [ 0.012552] DMA zone: 64 pages used for memmap |
| [ 0.012552] DMA zone: 21 pages reserved |
| [ 0.012553] DMA zone: 3998 pages, LIFO batch:0 |
| [ 0.012600] DMA32 zone: 8125 pages used for memmap |
| [ 0.012601] DMA32 zone: 519973 pages, LIFO batch:63 |
| [ 0.020689] Normal zone: 57048 pages used for memmap |
| [ 0.020690] Normal zone: 3651072 pages, LIFO batch:63 |
| [ 0.060663] Reserving Intel graphics memory at [mem 0x80a00000-0x829fffff] |
| [ 0.060973] ACPI: PM-Timer IO Port: 0x508 |
| [ 0.060976] ACPI: Local APIC address 0xfee00000 |
| [ 0.060991] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 |
| [ 0.060994] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) |
| [ 0.060995] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) |
| [ 0.060997] ACPI: IRQ0 used by override. |
| [ 0.060998] ACPI: IRQ9 used by override. |
| [ 0.060999] Using ACPI (MADT) for SMP configuration information |
| [ 0.061001] ACPI: HPET id: 0x8086a701 base: 0xfed00000 |
| [ 0.061005] smpboot: Allowing 4 CPUs, 0 hotplug CPUs |
| [ 0.061014] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] |
| [ 0.061016] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] |
| [ 0.061016] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] |
| [ 0.061017] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] |
| [ 0.061019] PM: Registered nosave memory: [mem 0x7ff25000-0x829fffff] |
| [ 0.061019] PM: Registered nosave memory: [mem 0x82a00000-0xefffffff] |
| [ 0.061020] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff] |
| [ 0.061021] PM: Registered nosave memory: [mem 0xf4000000-0xfed3ffff] |
| [ 0.061022] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff] |
| [ 0.061022] PM: Registered nosave memory: [mem 0xfed45000-0xfed8ffff] |
| [ 0.061023] PM: Registered nosave memory: [mem 0xfed90000-0xfed91fff] |
| [ 0.061024] PM: Registered nosave memory: [mem 0xfed92000-0xffffffff] |
| [ 0.061026] [mem 0x82a00000-0xefffffff] available for PCI devices |
| [ 0.061026] Booting paravirtualized kernel on bare hardware |
| [ 0.061029] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns |
| [ 0.143659] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 |
| [ 0.143837] percpu: Embedded 53 pages/cpu s178200 r8192 d30696 u524288 |
| [ 0.143843] pcpu-alloc: s178200 r8192 d30696 u524288 alloc=1*2097152 |
| [ 0.143844] pcpu-alloc: [0] 0 1 2 3 |
| [ 0.143862] Built 1 zonelists, mobility grouping on. Total pages: 4109785 |
| [ 0.143863] Policy zone: Normal |
| [ 0.143864] Kernel command line: BOOT_IMAGE=/vmlinuz-5.3.0-1-amd64 root=/dev/mapper/TP--T430s--vg-root ro iomem=relaxed |
| [ 0.144654] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) |
| [ 0.145030] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) |
| [ 0.145079] mem auto-init: stack:off, heap alloc:off, heap free:off |
| [ 0.148077] Calgary: detecting Calgary via BIOS EBDA area |
| [ 0.148081] Calgary: Unable to locate Rio Grande table in EBDA - bailing! |
| [ 0.186463] Memory: 16264032K/16700172K available (10243K kernel code, 1197K rwdata, 3556K rodata, 1660K init, 2100K bss, 436140K reserved, 0K cma-reserved) |
| [ 0.186566] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 |
| [ 0.186576] Kernel/User page tables isolation: enabled |
| [ 0.186589] ftrace: allocating 33146 entries in 130 pages |
| [ 0.198109] rcu: Hierarchical RCU implementation. |
| [ 0.198111] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4. |
| [ 0.198112] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. |
| [ 0.198113] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 |
| [ 0.201040] NR_IRQS: 33024, nr_irqs: 456, preallocated irqs: 16 |
| [ 0.201250] random: crng done (trusting CPU's manufacturer) |
| [ 0.202823] Console: colour VGA+ 80x25 |
| [ 0.208322] printk: console [tty0] enabled |
| [ 0.208388] ACPI: Core revision 20190703 |
| [ 0.208506] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns |
| [ 0.208591] APIC: Switch to symmetric I/O mode setup |
| [ 0.208648] DMAR: Host address width 36 |
| [ 0.208702] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 |
| [ 0.208763] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a |
| [ 0.208833] DMAR: RMRR base: 0x00000080800000 end: 0x000000829fffff |
| [ 0.208888] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 |
| [ 0.208944] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a |
| [ 0.209014] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 |
| [ 0.209073] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 |
| [ 0.209130] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. |
| [ 0.209595] DMAR-IR: Enabled IRQ remapping in x2apic mode |
| [ 0.209653] x2apic enabled |
| [ 0.209711] Switched APIC routing to cluster x2apic. |
| [ 0.210201] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 |
| [ 0.228593] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x29b49260d5b, max_idle_ns: 440795334477 ns |
| [ 0.228668] Calibrating delay loop (skipped), value calculated using timer frequency.. 5786.61 BogoMIPS (lpj=11573236) |
| [ 0.228743] pid_max: default: 32768 minimum: 301 |
| [ 0.228823] LSM: Security Framework initializing |
| [ 0.228884] Yama: disabled by default; enable with sysctl kernel.yama.* |
| [ 0.228959] AppArmor: AppArmor initialized |
| [ 0.229015] TOMOYO Linux initialized |
| [ 0.229109] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) |
| [ 0.229205] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) |
| [ 0.229489] mce: CPU0: Thermal monitoring enabled (TM1) |
| [ 0.229555] process: using mwait in idle threads |
| [ 0.229612] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 |
| [ 0.229669] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 |
| [ 0.229727] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization |
| [ 0.229798] Spectre V2 : Mitigation: Full generic retpoline |
| [ 0.229854] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch |
| [ 0.229923] Spectre V2 : Enabling Restricted Speculation for firmware calls |
| [ 0.229983] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier |
| [ 0.230051] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl |
| [ 0.230110] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp |
| [ 0.230184] MDS: Mitigation: Clear CPU buffers |
| [ 0.230390] Freeing SMP alternatives memory: 20K |
| [ 0.232016] TSC deadline timer enabled |
| [ 0.232019] smpboot: CPU0: Intel(R) Core(TM) i7-3520M CPU @ 2.90GHz (family: 0x6, model: 0x3a, stepping: 0x9) |
| [ 0.232189] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. |
| [ 0.232266] ... version: 3 |
| [ 0.232321] ... bit width: 48 |
| [ 0.232378] ... generic registers: 4 |
| [ 0.232432] ... value mask: 0000ffffffffffff |
| [ 0.232488] ... max period: 00007fffffffffff |
| [ 0.232544] ... fixed-purpose events: 3 |
| [ 0.232599] ... event mask: 000000070000000f |
| [ 0.232665] rcu: Hierarchical SRCU implementation. |
| [ 0.232665] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. |
| [ 0.232665] smp: Bringing up secondary CPUs ... |
| [ 0.232665] x86: Booting SMP configuration: |
| [ 0.232665] .... node #0, CPUs: #1 |
| [ 0.232747] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. |
| [ 0.232913] #2 #3 |
| [ 0.236715] smp: Brought up 1 node, 4 CPUs |
| [ 0.236779] smpboot: Max logical packages: 1 |
| [ 0.236835] smpboot: Total of 4 processors activated (23146.47 BogoMIPS) |
| [ 0.237898] devtmpfs: initialized |
| [ 0.237898] x86/mm: Memory block size: 128MB |
| [ 0.238168] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns |
| [ 0.238168] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) |
| [ 0.238168] pinctrl core: initialized pinctrl subsystem |
| [ 0.238168] NET: Registered protocol family 16 |
| [ 0.238168] audit: initializing netlink subsys (disabled) |
| [ 0.238168] audit: type=2000 audit(1572479338.028:1): state=initialized audit_enabled=0 res=1 |
| [ 0.240682] cpuidle: using governor ladder |
| [ 0.240741] cpuidle: using governor menu |
| [ 0.240820] ACPI: bus type PCI registered |
| [ 0.240875] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 |
| [ 0.242188] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) |
| [ 0.242261] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 |
| [ 0.242327] PCI: Using configuration type 1 for base access |
| [ 0.242399] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on |
| [ 0.243130] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages |
| [ 0.388863] alg: No test for lzo-rle (lzo-rle-generic) |
| [ 0.388863] alg: No test for lzo-rle (lzo-rle-scomp) |
| [ 0.388863] ACPI: Added _OSI(Module Device) |
| [ 0.388863] ACPI: Added _OSI(Processor Device) |
| [ 0.388863] ACPI: Added _OSI(3.0 _SCP Extensions) |
| [ 0.388904] ACPI: Added _OSI(Processor Aggregator Device) |
| [ 0.388961] ACPI: Added _OSI(Linux-Dell-Video) |
| [ 0.389017] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) |
| [ 0.389076] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) |
| [ 0.394483] ACPI: 2 ACPI AML tables successfully acquired and loaded |
| [ 0.395223] ACPI: EC: EC started |
| [ 0.395278] ACPI: EC: interrupt blocked |
| [ 0.395620] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC |
| [ 0.395679] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62 |
| [ 0.395748] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC used to handle transactions |
| [ 0.395817] ACPI: Interpreter enabled |
| [ 0.395886] ACPI: (supports S0 S3 S4 S5) |
| [ 0.395940] ACPI: Using IOAPIC for interrupt routing |
| [ 0.396010] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| [ 0.396192] ACPI: Enabled 1 GPEs in block 00 to 3F |
| [ 0.399304] ACPI: Power Resource [FPWR] (off) |
| [ 0.399605] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) |
| [ 0.399669] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] |
| [ 0.399777] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] |
| [ 0.399855] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge |
| [ 0.399968] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff window] (conflicts with Video ROM [mem 0x000c0000-0x000cf1ff]) |
| [ 0.400045] acpi PNP0A08:00: ignoring host bridge window [mem 0x000d0000-0x000d3fff window] (conflicts with Adapter ROM [mem 0x000cf800-0x000d05ff]) |
| [ 0.400251] PCI host bridge to bus 0000:00 |
| [ 0.400307] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] |
| [ 0.400367] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] |
| [ 0.400426] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] |
| [ 0.400496] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] |
| [ 0.400565] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] |
| [ 0.400633] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] |
| [ 0.400669] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] |
| [ 0.400738] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] |
| [ 0.400808] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] |
| [ 0.400877] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] |
| [ 0.400944] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] |
| [ 0.401013] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window] |
| [ 0.401080] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window] |
| [ 0.401149] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window] |
| [ 0.401218] pci_bus 0000:00: root bus resource [mem 0x82a00000-0xefffffff window] |
| [ 0.401288] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] |
| [ 0.401358] pci_bus 0000:00: root bus resource [bus 00-ff] |
| [ 0.401421] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000 |
| [ 0.401554] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000 |
| [ 0.401620] pci 0000:00:02.0: reg 0x10: [mem 0xe2400000-0xe27fffff 64bit] |
| [ 0.401683] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref] |
| [ 0.401752] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f] |
| [ 0.401872] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000 |
| [ 0.401936] pci 0000:00:04.0: reg 0x10: [mem 0xe2b30000-0xe2b37fff 64bit] |
| [ 0.402079] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330 |
| [ 0.402159] pci 0000:00:14.0: reg 0x10: [mem 0xe2b20000-0xe2b2ffff 64bit] |
| [ 0.402284] pci 0000:00:14.0: PME# supported from D3hot D3cold |
| [ 0.402408] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000 |
| [ 0.402483] pci 0000:00:19.0: reg 0x10: [mem 0xe2b00000-0xe2b1ffff] |
| [ 0.402546] pci 0000:00:19.0: reg 0x14: [mem 0xe2b3c000-0xe2b3cfff] |
| [ 0.402612] pci 0000:00:19.0: reg 0x18: [io 0x4040-0x405f] |
| [ 0.402725] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold |
| [ 0.402844] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 |
| [ 0.402923] pci 0000:00:1a.0: reg 0x10: [mem 0xe2b3f000-0xe2b3f3ff] |
| [ 0.403062] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold |
| [ 0.403184] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300 |
| [ 0.403261] pci 0000:00:1b.0: reg 0x10: [mem 0xe2b38000-0xe2b3bfff 64bit] |
| [ 0.403391] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold |
| [ 0.403519] pci 0000:00:1c.0: [8086:1e12] type 01 class 0x060400 |
| [ 0.403730] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold |
| [ 0.403813] pci 0000:00:1c.0: Enabling MPC IRBNCE |
| [ 0.403871] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled |
| [ 0.404002] pci 0000:00:1c.1: [8086:1e14] type 01 class 0x060400 |
| [ 0.404236] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold |
| [ 0.404322] pci 0000:00:1c.1: Enabling MPC IRBNCE |
| [ 0.404380] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled |
| [ 0.404509] pci 0000:00:1c.2: [8086:1e18] type 01 class 0x060400 |
| [ 0.404744] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold |
| [ 0.404828] pci 0000:00:1c.2: Enabling MPC IRBNCE |
| [ 0.404886] pci 0000:00:1c.2: Intel PCH root port ACS workaround enabled |
| [ 0.405016] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 |
| [ 0.405094] pci 0000:00:1d.0: reg 0x10: [mem 0xe2b40000-0xe2b403ff] |
| [ 0.405231] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold |
| [ 0.405353] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100 |
| [ 0.405568] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601 |
| [ 0.405645] pci 0000:00:1f.2: reg 0x10: [io 0x4080-0x4087] |
| [ 0.405707] pci 0000:00:1f.2: reg 0x14: [io 0x4090-0x4093] |
| [ 0.405771] pci 0000:00:1f.2: reg 0x18: [io 0x4088-0x408f] |
| [ 0.405832] pci 0000:00:1f.2: reg 0x1c: [io 0x4094-0x4097] |
| [ 0.405895] pci 0000:00:1f.2: reg 0x20: [io 0x4060-0x407f] |
| [ 0.405958] pci 0000:00:1f.2: reg 0x24: [mem 0xe2b3e000-0xe2b3e7ff] |
| [ 0.406058] pci 0000:00:1f.2: PME# supported from D3hot |
| [ 0.406172] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500 |
| [ 0.406246] pci 0000:00:1f.3: reg 0x10: [mem 0xe2b41000-0xe2b410ff 64bit] |
| [ 0.406325] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f] |
| [ 0.406454] pci 0000:00:1f.6: [8086:1e24] type 00 class 0x118000 |
| [ 0.406535] pci 0000:00:1f.6: reg 0x10: [mem 0xe2b3d000-0xe2b3dfff 64bit] |
| [ 0.406810] pci 0000:01:00.0: [14e4:43a0] type 00 class 0x028000 |
| [ 0.406961] pci 0000:01:00.0: reg 0x10: [mem 0xe2a00000-0xe2a07fff 64bit] |
| [ 0.407079] pci 0000:01:00.0: reg 0x18: [mem 0xe2800000-0xe29fffff 64bit] |
| [ 0.407387] pci 0000:01:00.0: supports D1 D2 |
| [ 0.407443] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.407772] pci 0000:00:1c.0: PCI bridge to [bus 01] |
| [ 0.407835] pci 0000:00:1c.0: bridge window [mem 0xe2800000-0xe2afffff] |
| [ 0.408110] pci 0000:02:00.0: [1180:e822] type 00 class 0x080500 |
| [ 0.408405] pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz. |
| [ 0.408713] pci 0000:02:00.0: reg 0x10: [mem 0xe0800000-0xe08000ff] |
| [ 0.409288] pci 0000:02:00.0: supports D1 D2 |
| [ 0.409345] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.409780] pci 0000:00:1c.1: PCI bridge to [bus 02] |
| [ 0.409841] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff] |
| [ 0.409902] pci 0000:00:1c.1: bridge window [mem 0xe0000000-0xe08fffff] |
| [ 0.409968] pci 0000:00:1c.1: bridge window [mem 0xe0c00000-0xe13fffff 64bit pref] |
| [ 0.410107] pci 0000:00:1c.2: PCI bridge to [bus 03] |
| [ 0.410163] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff] |
| [ 0.410225] pci 0000:00:1c.2: bridge window [mem 0xe1c00000-0xe23fffff] |
| [ 0.410290] pci 0000:00:1c.2: bridge window [mem 0xe1400000-0xe1bfffff 64bit pref] |
| [ 0.410502] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.410599] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.410692] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.410786] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.410877] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.410970] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.411063] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.411156] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.411793] ACPI: EC: interrupt unblocked |
| [ 0.411856] ACPI: EC: event unblocked |
| [ 0.411915] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62 |
| [ 0.411984] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC used to handle transactions and events |
| [ 0.412098] pci 0000:00:02.0: vgaarb: setting as boot VGA device |
| [ 0.412098] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none |
| [ 0.412098] pci 0000:00:02.0: vgaarb: bridge control possible |
| [ 0.412098] vgaarb: loaded |
| [ 0.412098] EDAC MC: Ver: 3.0.0 |
| [ 0.412688] PCI: Using ACPI for IRQ routing |
| [ 0.414199] PCI: pci_cache_line_size set to 64 bytes |
| [ 0.414732] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] |
| [ 0.414733] e820: reserve RAM buffer [mem 0x7ff25000-0x7fffffff] |
| [ 0.414735] e820: reserve RAM buffer [mem 0x47b600000-0x47bffffff] |
| [ 0.415224] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 |
| [ 0.415285] hpet0: 8 comparators, 64-bit 14.318180 MHz counter |
| [ 0.416684] clocksource: Switched to clocksource tsc-early |
| [ 0.426163] VFS: Disk quotas dquot_6.6.0 |
| [ 0.426235] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) |
| [ 0.426387] AppArmor: AppArmor Filesystem Enabled |
| [ 0.426458] pnp: PnP ACPI init |
| [ 0.426646] pnp 00:00: [Firmware Bug]: PNP resource [mem 0xf0000000-0x12fffffff] covers only part of 0000:00:00.0 Intel MCH; extending to [mem 0xfed10000-0xfed17fff] |
| [ 0.426756] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved |
| [ 0.426816] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved |
| [ 0.426874] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved |
| [ 0.428138] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved |
| [ 0.428196] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved |
| [ 0.428256] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved |
| [ 0.428315] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved |
| [ 0.428374] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved |
| [ 0.428433] system 00:00: [mem 0x20000000-0x201fffff] could not be reserved |
| [ 0.428492] system 00:00: [mem 0x40000000-0x401fffff] could not be reserved |
| [ 0.428557] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) |
| [ 0.428963] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved |
| [ 0.429026] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) |
| [ 0.429057] system 00:02: [io 0x0500-0x057f] has been reserved |
| [ 0.429115] system 00:02: [io 0x0480-0x04bf] has been reserved |
| [ 0.429174] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) |
| [ 0.429191] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) |
| [ 0.429215] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) |
| [ 0.429234] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active) |
| [ 0.429253] pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active) |
| [ 0.429271] pnp: PnP ACPI: found 7 devices |
| [ 0.430346] thermal_sys: Registered thermal governor 'fair_share' |
| [ 0.430346] thermal_sys: Registered thermal governor 'bang_bang' |
| [ 0.430405] thermal_sys: Registered thermal governor 'step_wise' |
| [ 0.430461] thermal_sys: Registered thermal governor 'user_space' |
| [ 0.435014] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns |
| [ 0.435178] pci 0000:00:1c.0: PCI bridge to [bus 01] |
| [ 0.435241] pci 0000:00:1c.0: bridge window [mem 0xe2800000-0xe2afffff] |
| [ 0.435310] pci 0000:00:1c.1: PCI bridge to [bus 02] |
| [ 0.435371] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff] |
| [ 0.435434] pci 0000:00:1c.1: bridge window [mem 0xe0000000-0xe08fffff] |
| [ 0.435497] pci 0000:00:1c.1: bridge window [mem 0xe0c00000-0xe13fffff 64bit pref] |
| [ 0.435573] pci 0000:00:1c.2: PCI bridge to [bus 03] |
| [ 0.435630] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff] |
| [ 0.435693] pci 0000:00:1c.2: bridge window [mem 0xe1c00000-0xe23fffff] |
| [ 0.435756] pci 0000:00:1c.2: bridge window [mem 0xe1400000-0xe1bfffff 64bit pref] |
| [ 0.435833] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] |
| [ 0.435893] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] |
| [ 0.435951] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] |
| [ 0.436008] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] |
| [ 0.436067] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window] |
| [ 0.436127] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window] |
| [ 0.436187] pci_bus 0000:00: resource 10 [mem 0x000d4000-0x000d7fff window] |
| [ 0.436246] pci_bus 0000:00: resource 11 [mem 0x000d8000-0x000dbfff window] |
| [ 0.436305] pci_bus 0000:00: resource 12 [mem 0x000dc000-0x000dffff window] |
| [ 0.436364] pci_bus 0000:00: resource 13 [mem 0x000e0000-0x000e3fff window] |
| [ 0.436424] pci_bus 0000:00: resource 14 [mem 0x000e4000-0x000e7fff window] |
| [ 0.436483] pci_bus 0000:00: resource 15 [mem 0x000e8000-0x000ebfff window] |
| [ 0.436541] pci_bus 0000:00: resource 16 [mem 0x000ec000-0x000effff window] |
| [ 0.436600] pci_bus 0000:00: resource 17 [mem 0x000f0000-0x000fffff window] |
| [ 0.436659] pci_bus 0000:00: resource 18 [mem 0x82a00000-0xefffffff window] |
| [ 0.436722] pci_bus 0000:00: resource 19 [mem 0xfed40000-0xfed44fff window] |
| [ 0.436782] pci_bus 0000:01: resource 1 [mem 0xe2800000-0xe2afffff] |
| [ 0.436840] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] |
| [ 0.436898] pci_bus 0000:02: resource 1 [mem 0xe0000000-0xe08fffff] |
| [ 0.436956] pci_bus 0000:02: resource 2 [mem 0xe0c00000-0xe13fffff 64bit pref] |
| [ 0.437026] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff] |
| [ 0.437081] pci_bus 0000:03: resource 1 [mem 0xe1c00000-0xe23fffff] |
| [ 0.437139] pci_bus 0000:03: resource 2 [mem 0xe1400000-0xe1bfffff 64bit pref] |
| [ 0.437269] NET: Registered protocol family 2 |
| [ 0.437446] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear) |
| [ 0.437533] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) |
| [ 0.437746] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) |
| [ 0.437915] TCP: Hash tables configured (established 131072 bind 65536) |
| [ 0.437995] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear) |
| [ 0.438080] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear) |
| [ 0.438206] NET: Registered protocol family 1 |
| [ 0.438265] NET: Registered protocol family 44 |
| [ 0.438329] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] |
| [ 0.439012] PCI: CLS 64 bytes, default 64 |
| [ 0.439107] Trying to unpack rootfs image as initramfs... |
| [ 1.172629] Freeing initrd memory: 57716K |
| [ 1.172742] DMAR: No ATSR found |
| [ 1.172823] DMAR: dmar0: Using Queued invalidation |
| [ 1.172885] DMAR: dmar1: Using Queued invalidation |
| [ 1.243055] pci 0000:00:00.0: Adding to iommu group 0 |
| [ 1.245979] pci 0000:00:02.0: Adding to iommu group 1 |
| [ 1.246475] pci 0000:00:02.0: Using iommu direct mapping |
| [ 1.246561] pci 0000:00:04.0: Adding to iommu group 2 |
| [ 1.246647] pci 0000:00:14.0: Adding to iommu group 3 |
| [ 1.246739] pci 0000:00:19.0: Adding to iommu group 4 |
| [ 1.246826] pci 0000:00:1a.0: Adding to iommu group 5 |
| [ 1.246917] pci 0000:00:1b.0: Adding to iommu group 6 |
| [ 1.247006] pci 0000:00:1c.0: Adding to iommu group 7 |
| [ 1.247098] pci 0000:00:1c.1: Adding to iommu group 8 |
| [ 1.247185] pci 0000:00:1c.2: Adding to iommu group 9 |
| [ 1.247278] pci 0000:00:1d.0: Adding to iommu group 10 |
| [ 1.247376] pci 0000:00:1f.0: Adding to iommu group 11 |
| [ 1.247441] pci 0000:00:1f.2: Adding to iommu group 11 |
| [ 1.247507] pci 0000:00:1f.3: Adding to iommu group 11 |
| [ 1.247574] pci 0000:00:1f.6: Adding to iommu group 11 |
| [ 1.247669] pci 0000:01:00.0: Adding to iommu group 12 |
| [ 1.247763] pci 0000:02:00.0: Adding to iommu group 13 |
| [ 1.248001] DMAR: Intel(R) Virtualization Technology for Directed I/O |
| [ 1.249847] Initialise system trusted keyrings |
| [ 1.249913] Key type blacklist registered |
| [ 1.250004] workingset: timestamp_bits=40 max_order=22 bucket_order=0 |
| [ 1.251062] zbud: loaded |
| [ 1.251355] Platform Keyring initialized |
| [ 1.251413] Key type asymmetric registered |
| [ 1.251470] Asymmetric key parser 'x509' registered |
| [ 1.251533] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) |
| [ 1.251639] io scheduler mq-deadline registered |
| [ 1.251943] pcieport 0000:00:1c.0: PME: Signaling with IRQ 26 |
| [ 1.252208] pcieport 0000:00:1c.1: PME: Signaling with IRQ 27 |
| [ 1.252293] pcieport 0000:00:1c.1: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+ |
| [ 1.252645] pcieport 0000:00:1c.2: PME: Signaling with IRQ 28 |
| [ 1.252737] pcieport 0000:00:1c.2: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+ |
| [ 1.252932] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 |
| [ 1.253002] intel_idle: MWAIT substates: 0x21120 |
| [ 1.253003] intel_idle: v0.4.1 model 0x3A |
| [ 1.253140] intel_idle: lapic_timer_reliable_states 0xffffffff |
| [ 1.254562] thermal LNXTHERM:00: registered as thermal_zone0 |
| [ 1.254622] ACPI: Thermal Zone [THM0] (55 C) |
| [ 1.255445] thermal LNXTHERM:01: registered as thermal_zone1 |
| [ 1.255505] ACPI: Thermal Zone [THM1] (27 C) |
| [ 1.255637] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
| [ 1.256067] Linux agpgart interface v0.103 |
| [ 1.256163] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de> |
| [ 1.256223] AMD-Vi: AMD IOMMUv2 functionality not available on this system |
| [ 1.256461] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 |
| [ 1.258166] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| [ 1.258227] serio: i8042 AUX port at 0x60,0x64 irq 12 |
| [ 1.258392] mousedev: PS/2 mouse device common for all mice |
| [ 1.258482] rtc_cmos 00:03: RTC can wake from S4 |
| [ 1.258704] rtc_cmos 00:03: registered as rtc0 |
| [ 1.258785] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs |
| [ 1.258861] intel_pstate: Intel P-state driver initializing |
| [ 1.259144] ledtrig-cpu: registered to indicate activity on CPUs |
| [ 1.259712] NET: Registered protocol family 10 |
| [ 1.259846] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 |
| [ 1.279204] Segment Routing with IPv6 |
| [ 1.279324] mip6: Mobile IPv6 |
| [ 1.279390] NET: Registered protocol family 17 |
| [ 1.279593] mpls_gso: MPLS GSO support |
| [ 1.280211] microcode: sig=0x306a9, pf=0x10, revision=0x21 |
| [ 1.280332] microcode: Microcode Update Driver: v2.2. |
| [ 1.280350] sched_clock: Marking stable (1272662968, 7443810)->(1286558311, -6451533) |
| [ 1.280835] registered taskstats version 1 |
| [ 1.280896] Loading compiled-in X.509 certificates |
| [ 1.313347] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' |
| [ 1.313428] Loaded X.509 cert 'Debian Secure Boot Signer: 00a7468def' |
| [ 1.313503] zswap: loaded using pool lzo/zbud |
| [ 1.313620] AppArmor: AppArmor sha1 policy hashing enabled |
| [ 1.314002] rtc_cmos 00:03: setting system clock to 2019-10-30T23:48:59 UTC (1572479339) |
| [ 1.314911] Freeing unused kernel image memory: 1660K |
| [ 1.336783] Write protecting the kernel read-only data: 16384k |
| [ 1.337918] Freeing unused kernel image memory: 2036K |
| [ 1.338398] Freeing unused kernel image memory: 540K |
| [ 1.351521] x86/mm: Checked W+X mappings: passed, no W+X pages found. |
| [ 1.351581] x86/mm: Checking user space page tables |
| [ 1.357691] x86/mm: Checked W+X mappings: passed, no W+X pages found. |
| [ 1.357750] Run /init as init process |
| [ 1.467054] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2a/PNP0C09:00/PNP0C0E:00/input/input2 |
| [ 1.467150] ACPI: Sleep Button [SLPB] |
| [ 1.467262] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2a/PNP0C09:00/PNP0C0D:00/input/input3 |
| [ 1.467346] ACPI: Lid Switch [LID] |
| [ 1.467451] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 |
| [ 1.467529] ACPI: Power Button [PWRF] |
| [ 1.479635] pps_core: LinuxPPS API ver. 1 registered |
| [ 1.479728] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> |
| [ 1.481288] PTP clock support registered |
| [ 1.495787] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k |
| [ 1.495849] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. |
| [ 1.496061] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode |
| [ 1.497840] ACPI: bus type USB registered |
| [ 1.497918] usbcore: registered new interface driver usbfs |
| [ 1.499144] usbcore: registered new interface driver hub |
| [ 1.499225] usbcore: registered new device driver usb |
| [ 1.509816] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| [ 1.510057] sdhci: Secure Digital Host Controller Interface driver |
| [ 1.510117] sdhci: Copyright(c) Pierre Ossman |
| [ 1.510650] ehci-pci: EHCI PCI platform driver |
| [ 1.510847] ehci-pci 0000:00:1a.0: EHCI Host Controller |
| [ 1.510909] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 |
| [ 1.510990] ehci-pci 0000:00:1a.0: debug port 2 |
| [ 1.513187] sdhci-pci 0000:02:00.0: SDHCI controller found [1180:e822] (rev 7) |
| [ 1.513761] sdhci-pci 0000:02:00.0: Will use DMA mode even though HW doesn't fully claim to support it. |
| [ 1.514033] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes |
| [ 1.514284] sdhci-pci 0000:02:00.0: Will use DMA mode even though HW doesn't fully claim to support it. |
| [ 1.514963] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported |
| [ 1.515289] ehci-pci 0000:00:1a.0: irq 19, io mem 0xe2b3f000 |
| [ 1.515632] mmc0: SDHCI controller on PCI [0000:02:00.0] using DMA |
| [ 1.518025] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt |
| [ 1.524347] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20190703/utaddress-204) |
| [ 1.524443] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 1.524517] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20190703/utaddress-204) |
| [ 1.524608] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 1.525551] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20190703/utaddress-204) |
| [ 1.525644] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 1.525717] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20190703/utaddress-204) |
| [ 1.525810] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 1.525883] lpc_ich: Resource conflict(s) found affecting gpio_ich |
| [ 1.528685] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 |
| [ 1.528793] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03 |
| [ 1.528870] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.528943] usb usb1: Product: EHCI Host Controller |
| [ 1.529003] usb usb1: Manufacturer: Linux 5.3.0-1-amd64 ehci_hcd |
| [ 1.529065] usb usb1: SerialNumber: 0000:00:1a.0 |
| [ 1.529250] hub 1-0:1.0: USB hub found |
| [ 1.529315] hub 1-0:1.0: 3 ports detected |
| [ 1.531728] xhci_hcd 0000:00:14.0: xHCI Host Controller |
| [ 1.531794] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 |
| [ 1.533153] xhci_hcd 0000:00:14.0: hcc params 0x200071a1 hci version 0x100 quirks 0x000000000000b930 |
| [ 1.533230] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported |
| [ 1.533461] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03 |
| [ 1.533473] cryptd: max_cpu_qlen set to 1000 |
| [ 1.533533] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.533659] usb usb2: Product: xHCI Host Controller |
| [ 1.533717] usb usb2: Manufacturer: Linux 5.3.0-1-amd64 xhci-hcd |
| [ 1.533777] usb usb2: SerialNumber: 0000:00:14.0 |
| [ 1.535401] hub 2-0:1.0: USB hub found |
| [ 1.536535] hub 2-0:1.0: 4 ports detected |
| [ 1.537961] xhci_hcd 0000:00:14.0: xHCI Host Controller |
| [ 1.538026] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 |
| [ 1.538030] SCSI subsystem initialized |
| [ 1.538102] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed |
| [ 1.538147] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.03 |
| [ 1.538255] ehci-pci 0000:00:1d.0: EHCI Host Controller |
| [ 1.538301] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.538426] usb usb3: Product: xHCI Host Controller |
| [ 1.538483] usb usb3: Manufacturer: Linux 5.3.0-1-amd64 xhci-hcd |
| [ 1.538542] usb usb3: SerialNumber: 0000:00:14.0 |
| [ 1.538703] hub 3-0:1.0: USB hub found |
| [ 1.538771] hub 3-0:1.0: 4 ports detected |
| [ 1.538998] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4 |
| [ 1.539083] ehci-pci 0000:00:1d.0: debug port 2 |
| [ 1.543068] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported |
| [ 1.543138] ehci-pci 0000:00:1d.0: irq 18, io mem 0xe2b40000 |
| [ 1.556860] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 |
| [ 1.557006] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03 |
| [ 1.557090] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.557162] usb usb4: Product: EHCI Host Controller |
| [ 1.557219] usb usb4: Manufacturer: Linux 5.3.0-1-amd64 ehci_hcd |
| [ 1.557279] usb usb4: SerialNumber: 0000:00:1d.0 |
| [ 1.557474] hub 4-0:1.0: USB hub found |
| [ 1.557537] hub 4-0:1.0: 3 ports detected |
| [ 1.558257] AVX version of gcm_enc/dec engaged. |
| [ 1.558315] AES CTR mode by8 optimization enabled |
| [ 1.573635] libata version 3.00 loaded. |
| [ 1.578383] ahci 0000:00:1f.2: version 3.0 |
| [ 1.578558] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled |
| [ 1.588708] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x17 impl SATA mode |
| [ 1.588789] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst |
| [ 1.589663] scsi host0: ahci |
| [ 1.596693] scsi host1: ahci |
| [ 1.608829] scsi host2: ahci |
| [ 1.609799] scsi host3: ahci |
| [ 1.610057] scsi host4: ahci |
| [ 1.610905] [drm] VT-d active for gfx access |
| [ 1.610965] i915 0000:00:02.0: vgaarb: deactivate vga console |
| [ 1.611647] scsi host5: ahci |
| [ 1.611709] ata1: SATA max UDMA/133 abar m2048@0xe2b3e000 port 0xe2b3e100 irq 31 |
| [ 1.611712] ata2: SATA max UDMA/133 abar m2048@0xe2b3e000 port 0xe2b3e180 irq 31 |
| [ 1.611715] ata3: SATA max UDMA/133 abar m2048@0xe2b3e000 port 0xe2b3e200 irq 31 |
| [ 1.611716] ata4: DUMMY |
| [ 1.611719] ata5: SATA max UDMA/133 abar m2048@0xe2b3e000 port 0xe2b3e300 irq 31 |
| [ 1.611719] ata6: DUMMY |
| [ 1.611878] Console: switching to colour dummy device 80x25 |
| [ 1.611945] [drm] DMAR active, disabling use of stolen memory |
| [ 1.615984] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock |
| [ 1.663276] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). |
| [ 1.663286] [drm] Driver supports precise vblank timestamp query. |
| [ 1.663548] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem |
| [ 1.666877] mmc0: new high speed SD card at address e42f |
| [ 1.669675] mmcblk0: mmc0:e42f SD02G 1.89 GiB |
| [ 1.670657] mmcblk0: p1 |
| [ 1.712331] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 3c:97:0e:46:56:66 |
| [ 1.712336] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection |
| [ 1.712372] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF |
| [ 1.713253] e1000e 0000:00:19.0 eno0: renamed from eth0 |
| [ 1.729100] [drm] Initialized i915 1.6.0 20190619 for 0000:00:02.0 on minor 0 |
| [ 1.729331] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) |
| [ 1.753867] acpi device:0d: registered as cooling_device5 |
| [ 1.753973] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6 |
| [ 1.864675] usb 1-1: new high-speed USB device number 2 using ehci-pci |
| [ 1.876706] usb 2-3: new high-speed USB device number 2 using xhci_hcd |
| [ 1.892716] usb 4-1: new high-speed USB device number 2 using ehci-pci |
| [ 1.927050] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [ 1.927975] ata1.00: ATA-9: KINGSTON SKC400S37512G, SAFM001B, max UDMA/133 |
| [ 1.927986] ata1.00: 1000215216 sectors, multi 0: LBA48 NCQ (depth 32), AA |
| [ 1.928147] ata1.00: configured for UDMA/133 |
| [ 1.928412] scsi 0:0:0:0: Direct-Access ATA KINGSTON SKC400S 001B PQ: 0 ANSI: 5 |
| [ 2.021376] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 |
| [ 2.021382] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 2.021559] hub 1-1:1.0: USB hub found |
| [ 2.021655] hub 1-1:1.0: 6 ports detected |
| [ 2.038425] usb 2-3: New USB device found, idVendor=2109, idProduct=2813, bcdDevice= 2.21 |
| [ 2.038430] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 2.038433] usb 2-3: Product: USB2.0 Hub |
| [ 2.038436] usb 2-3: Manufacturer: VIA Labs, Inc. |
| [ 2.039318] hub 2-3:1.0: USB hub found |
| [ 2.039527] hub 2-3:1.0: 4 ports detected |
| [ 2.049492] usb 4-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 |
| [ 2.049497] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 2.050202] hub 4-1:1.0: USB hub found |
| [ 2.050408] hub 4-1:1.0: 8 ports detected |
| [ 2.055404] fbcon: i915drmfb (fb0) is primary device |
| [ 2.225782] usb 3-3: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd |
| [ 2.243695] psmouse serio1: synaptics: queried max coordinates: x [..5470], y [..4498] |
| [ 2.243792] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [ 2.256755] tsc: Refined TSC clocksource calibration: 2893.427 MHz |
| [ 2.256775] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29b502105a9, max_idle_ns: 440795323709 ns |
| [ 2.256809] clocksource: Switched to clocksource tsc |
| [ 2.281152] ata2.00: ATA-10: ST2000LM015-2E8174, SDM1, max UDMA/133 |
| [ 2.281155] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA |
| [ 2.304946] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b1/0xb40000/0xa0000/0x0, board id: 0, fw id: 920262 |
| [ 2.304955] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0 |
| [ 2.312752] usb 1-1.3: new full-speed USB device number 3 using ehci-pci |
| [ 2.331023] ata2.00: configured for UDMA/133 |
| [ 2.340515] scsi 1:0:0:0: Direct-Access ATA ST2000LM015-2E81 SDM1 PQ: 0 ANSI: 5 |
| [ 2.340708] usb 4-1.5: new high-speed USB device number 3 using ehci-pci |
| [ 2.344080] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5 |
| [ 2.370236] usb 3-3: New USB device found, idVendor=2109, idProduct=0813, bcdDevice= 2.21 |
| [ 2.370239] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 2.370242] usb 3-3: Product: USB3.0 Hub |
| [ 2.370244] usb 3-3: Manufacturer: VIA Labs, Inc. |
| [ 2.373214] hub 3-3:1.0: USB hub found |
| [ 2.373468] hub 3-3:1.0: 4 ports detected |
| [ 2.422655] usb 1-1.3: New USB device found, idVendor=147e, idProduct=2020, bcdDevice= 0.01 |
| [ 2.422658] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 2.422661] usb 1-1.3: Product: Biometric Coprocessor |
| [ 2.422663] usb 1-1.3: Manufacturer: Auth |
| [ 2.449849] usb 4-1.5: New USB device found, idVendor=0000, idProduct=0000, bcdDevice= 0.00 |
| [ 2.449852] usb 4-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 2.450603] hub 4-1.5:1.0: USB hub found |
| [ 2.450758] hub 4-1.5:1.0: 7 ports detected |
| [ 2.451005] hub 4-1.5:1.0: insufficient power available to use all downstream ports |
| [ 2.500751] usb 1-1.4: new full-speed USB device number 4 using ehci-pci |
| [ 2.617513] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=21e6, bcdDevice= 1.12 |
| [ 2.617517] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [ 2.617519] usb 1-1.4: Product: BCM20702A0 |
| [ 2.617521] usb 1-1.4: Manufacturer: Broadcom Corp |
| [ 2.617523] usb 1-1.4: SerialNumber: B8763FA9D32E |
| [ 2.655556] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) |
| [ 2.655940] ata3.00: supports DRM functions and may not be fully accessible |
| [ 2.656101] ata3.00: ATA-11: KINGSTON SUV500MS240G, 003056RI, max UDMA/133 |
| [ 2.656105] ata3.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 32), AA |
| [ 2.656897] ata3.00: Trusted Computing capability qword not valid! |
| [ 2.657370] ata3.00: supports DRM functions and may not be fully accessible |
| [ 2.658210] ata3.00: Trusted Computing capability qword not valid! |
| [ 2.658215] ata3.00: configured for UDMA/133 |
| [ 2.658639] scsi 2:0:0:0: Direct-Access ATA KINGSTON SUV500M 56RI PQ: 0 ANSI: 5 |
| [ 2.696716] usb 1-1.6: new high-speed USB device number 5 using ehci-pci |
| [ 2.740754] usb 4-1.5.2: new high-speed USB device number 4 using ehci-pci |
| [ 2.813102] usb 1-1.6: New USB device found, idVendor=5986, idProduct=02d5, bcdDevice=10.11 |
| [ 2.813105] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 2.813108] usb 1-1.6: Product: Integrated Camera |
| [ 2.813110] usb 1-1.6: Manufacturer: Ricoh Company Ltd. |
| [ 2.849714] usb 4-1.5.2: New USB device found, idVendor=0409, idProduct=005a, bcdDevice= 1.00 |
| [ 2.849718] usb 4-1.5.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 2.850287] hub 4-1.5.2:1.0: USB hub found |
| [ 2.852640] hub 4-1.5.2:1.0: 4 ports detected |
| [ 2.865279] Console: switching to colour frame buffer device 240x67 |
| [ 2.921304] i915 0000:00:02.0: fb0: i915drmfb frame buffer device |
| [ 2.932770] usb 4-1.5.3: new high-speed USB device number 5 using ehci-pci |
| [ 2.972821] ata5: SATA link down (SStatus 0 SControl 300) |
| [ 2.990539] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) |
| [ 2.991018] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 |
| [ 2.991666] sd 2:0:0:0: [sdc] 468862128 512-byte logical blocks: (240 GB/224 GiB) |
| [ 2.991667] sd 2:0:0:0: [sdc] 4096-byte physical blocks |
| [ 2.991677] sd 2:0:0:0: [sdc] Write Protect is off |
| [ 2.991679] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 |
| [ 2.991695] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 2.992060] sd 1:0:0:0: [sdb] 4096-byte physical blocks |
| [ 2.992081] sd 0:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/477 GiB) |
| [ 2.992089] sd 0:0:0:0: [sda] Write Protect is off |
| [ 2.992090] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 |
| [ 2.992104] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 2.992931] sdc: sdc1 sdc2 sdc3 |
| [ 2.993261] sd 2:0:0:0: [sdc] Attached SCSI disk |
| [ 2.993396] sda: sda1 sda2 < sda5 > |
| [ 2.993684] sd 0:0:0:0: [sda] Attached SCSI disk |
| [ 3.014199] sd 1:0:0:0: [sdb] Write Protect is off |
| [ 3.015511] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 |
| [ 3.015526] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 3.027617] sdb: sdb1 |
| [ 3.029495] sd 1:0:0:0: [sdb] Attached SCSI disk |
| [ 3.045696] usb 4-1.5.3: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3 |
| [ 3.047040] usb 4-1.5.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 3.048604] hub 4-1.5.3:1.0: USB hub found |
| [ 3.050642] hub 4-1.5.3:1.0: 4 ports detected |
| [ 3.132734] usb 4-1.5.5: new full-speed USB device number 6 using ehci-pci |
| [ 3.200112] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input7 |
| [ 3.257661] usb 4-1.5.5: New USB device found, idVendor=17ef, idProduct=604d, bcdDevice= 1.22 |
| [ 3.259496] usb 4-1.5.5: New USB device strings: Mfr=0, Product=2, SerialNumber=0 |
| [ 3.261315] usb 4-1.5.5: Product: Lenovo USB Receiver |
| [ 3.271132] hidraw: raw HID events driver (C) Jiri Kosina |
| [ 3.281309] usbcore: registered new interface driver usbhid |
| [ 3.282680] usbhid: USB HID core driver |
| [ 3.286031] input: Lenovo USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.5/4-1.5.5:1.0/0003:17EF:604D.0001/input/input8 |
| [ 3.336722] usb 4-1.5.2.1: new high-speed USB device number 7 using ehci-pci |
| [ 3.344885] hid-generic 0003:17EF:604D.0001: input,hidraw0: USB HID v1.11 Keyboard [Lenovo USB Receiver] on usb-0000:00:1d.0-1.5.5/input0 |
| [ 3.346402] input: Lenovo USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.5/4-1.5.5:1.1/0003:17EF:604D.0002/input/input9 |
| [ 3.348284] hid-generic 0003:17EF:604D.0002: input,hidraw1: USB HID v1.11 Mouse [Lenovo USB Receiver] on usb-0000:00:1d.0-1.5.5/input1 |
| [ 3.349938] input: Lenovo USB Receiver Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.5/4-1.5.5:1.2/0003:17EF:604D.0003/input/input10 |
| [ 3.408887] input: Lenovo USB Receiver System Control as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.5/4-1.5.5:1.2/0003:17EF:604D.0003/input/input11 |
| [ 3.412479] input: Lenovo USB Receiver Keypad as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.5/4-1.5.5:1.2/0003:17EF:604D.0003/input/input12 |
| [ 3.416443] hid-generic 0003:17EF:604D.0003: input,hiddev0,hidraw2: USB HID v1.11 Keypad [Lenovo USB Receiver] on usb-0000:00:1d.0-1.5.5/input2 |
| [ 3.445696] usb 4-1.5.2.1: New USB device found, idVendor=0409, idProduct=005a, bcdDevice= 1.00 |
| [ 3.447996] usb 4-1.5.2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 3.450637] hub 4-1.5.2.1:1.0: USB hub found |
| [ 3.453843] hub 4-1.5.2.1:1.0: 4 ports detected |
| [ 3.528676] usb 4-1.5.6: new full-speed USB device number 8 using ehci-pci |
| [ 3.540673] raid6: sse2x4 gen() 10734 MB/s |
| [ 3.608670] raid6: sse2x4 xor() 8321 MB/s |
| [ 3.640324] usb 4-1.5.6: New USB device found, idVendor=04b4, idProduct=4042, bcdDevice= 1.03 |
| [ 3.642375] usb 4-1.5.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 3.647317] input: HID 04b4:4042 as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.6/4-1.5.6:1.0/0003:04B4:4042.0004/input/input13 |
| [ 3.676669] raid6: sse2x2 gen() 11660 MB/s |
| [ 3.711238] hid-generic 0003:04B4:4042.0004: input,hidraw3: USB HID v1.11 Keyboard [HID 04b4:4042] on usb-0000:00:1d.0-1.5.6/input0 |
| [ 3.718035] input: HID 04b4:4042 Mouse as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.6/4-1.5.6:1.1/0003:04B4:4042.0005/input/input14 |
| [ 3.720372] input: HID 04b4:4042 System Control as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.6/4-1.5.6:1.1/0003:04B4:4042.0005/input/input15 |
| [ 3.744672] raid6: sse2x2 xor() 7921 MB/s |
| [ 3.744675] usb 4-1.5.2.1.2: new full-speed USB device number 9 using ehci-pci |
| [ 3.780732] input: HID 04b4:4042 Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.6/4-1.5.6:1.1/0003:04B4:4042.0005/input/input16 |
| [ 3.783249] input: HID 04b4:4042 as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.6/4-1.5.6:1.1/0003:04B4:4042.0005/input/input17 |
| [ 3.785830] input: HID 04b4:4042 Keyboard as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.6/4-1.5.6:1.1/0003:04B4:4042.0005/input/input18 |
| [ 3.788299] hid-generic 0003:04B4:4042.0005: input,hiddev1,hidraw4: USB HID v1.11 Mouse [HID 04b4:4042] on usb-0000:00:1d.0-1.5.6/input1 |
| [ 3.812674] raid6: sse2x1 gen() 9847 MB/s |
| [ 3.862836] usb 4-1.5.2.1.2: New USB device found, idVendor=067b, idProduct=2305, bcdDevice= 2.02 |
| [ 3.865209] usb 4-1.5.2.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 3.867603] usb 4-1.5.2.1.2: Product: IEEE-1284 Controller |
| [ 3.869988] usb 4-1.5.2.1.2: Manufacturer: Prolific Technology Inc. |
| [ 3.880675] raid6: sse2x1 xor() 6755 MB/s |
| [ 3.882238] raid6: using algorithm sse2x2 gen() 11660 MB/s |
| [ 3.883787] raid6: .... xor() 7921 MB/s, rmw enabled |
| [ 3.885348] raid6: using ssse3x2 recovery algorithm |
| [ 3.887803] xor: automatically using best checksumming function avx |
| [ 3.890920] async_tx: api initialized (async) |
| [ 3.952759] usb 4-1.5.2.1.3: new full-speed USB device number 10 using ehci-pci |
| [ 4.082363] usb 4-1.5.2.1.3: New USB device found, idVendor=067b, idProduct=2303, bcdDevice= 4.00 |
| [ 4.086389] usb 4-1.5.2.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 4.090374] usb 4-1.5.2.1.3: Product: USB-Serial Controller D |
| [ 4.094299] usb 4-1.5.2.1.3: Manufacturer: Prolific Technology Inc. |
| [ 4.133973] device-mapper: uevent: version 1.0.3 |
| [ 4.135720] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com |
| [ 11.582346] PM: Image not found (code -22) |
| [ 11.587933] PM: Marking nosave pages: [mem 0x00000000-0x00000fff] |
| [ 11.587935] PM: Marking nosave pages: [mem 0x0009f000-0x000fffff] |
| [ 11.587940] PM: Marking nosave pages: [mem 0x7ff25000-0xffffffff] |
| [ 11.589716] PM: Basic memory bitmaps created |
| [ 11.590457] PM: Basic memory bitmaps freed |
| [ 11.591264] video LNXVIDEO:00: Restoring backlight state |
| [ 11.706562] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) |
| [ 11.771294] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. |
| [ 11.927793] systemd[1]: Inserted module 'autofs4' |
| [ 11.950332] systemd[1]: systemd 242 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) |
| [ 11.972907] systemd[1]: Detected architecture x86-64. |
| [ 11.982523] systemd[1]: Set hostname to <TP-T430s>. |
| [ 11.983270] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument |
| [ 12.087862] systemd[1]: /lib/systemd/system/dbus.socket:4: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly. |
| [ 12.123788] systemd[1]: /lib/systemd/system/thinkfan.service:8: PIDFile= references a path below legacy directory /var/run/, updating /var/run/thinkfan.pid → /run/thinkfan.pid; please update the unit file accordingly. |
| [ 12.127772] systemd[1]: /etc/systemd/system/teamviewerd.service:8: PIDFile= references a path below legacy directory /var/run/, updating /var/run/teamviewerd.pid → /run/teamviewerd.pid; please update the unit file accordingly. |
| [ 12.145308] systemd[1]: /lib/systemd/system/fancontrol.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/fancontrol.pid → /run/fancontrol.pid; please update the unit file accordingly. |
| [ 12.148804] systemd[1]: /lib/systemd/system/docker.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/docker.sock → /run/docker.sock; please update the unit file accordingly. |
| [ 12.157111] systemd[1]: /etc/systemd/system/anydesk.service:8: PIDFile= references a path below legacy directory /var/run/, updating /var/run/anydesk.pid → /run/anydesk.pid; please update the unit file accordingly. |
| [ 12.241781] loop: module loaded |
| [ 12.269041] lp: driver loaded but no devices found |
| [ 12.280902] ppdev: user-space parallel port driver |
| [ 12.291076] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro |
| [ 12.608685] systemd-journald[478]: Received request to flush runtime journal from PID 1 |
| [ 12.622286] ACPI: AC Adapter [AC] (on-line) |
| [ 12.633733] battery: ACPI: Battery Slot [BAT0] (battery present) |
| [ 12.635788] battery: ACPI: Battery Slot [BAT1] (battery absent) |
| [ 12.708970] Non-volatile memory driver v1.3 |
| [ 12.710606] tpm_tis 00:06: 1.2 TPM (device-id 0x0, rev-id 78) |
| [ 12.765025] iTCO_vendor_support: vendor-support=0 |
| [ 12.770321] sd 0:0:0:0: Attached scsi generic sg0 type 0 |
| [ 12.772121] thinkpad_acpi: ThinkPad ACPI Extras v0.26 |
| [ 12.773728] thinkpad_acpi: http://ibm-acpi.sf.net/ |
| [ 12.774959] thinkpad_acpi: ThinkPad BIOS CBET4000 4.10-1264-gd276008b2a, EC G7HT39WW-3.22 |
| [ 12.776125] thinkpad_acpi: Lenovo ThinkPad T430s, model 23532NU |
| [ 12.776878] sd 1:0:0:0: Attached scsi generic sg1 type 0 |
| [ 12.780722] sd 2:0:0:0: Attached scsi generic sg2 type 0 |
| [ 12.783531] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 |
| [ 12.785301] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560) |
| [ 12.787717] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) |
| [ 12.787725] thinkpad_acpi: radio switch found; radios are enabled |
| [ 12.795024] thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode |
| [ 12.796775] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver |
| [ 12.798467] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... |
| [ 12.812918] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked |
| [ 12.815292] thinkpad_acpi: rfkill switch tpacpi_wwan_sw: radio is unblocked |
| [ 12.821369] wl: loading out-of-tree module taints kernel. |
| [ 12.823103] wl: module license 'MIXED/Proprietary' taints kernel. |
| [ 12.824162] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one |
| [ 12.824864] Disabling lock debugging due to kernel taint |
| [ 12.829702] thinkpad_acpi: Console audio control enabled, mode: monitor (read only) |
| [ 12.833847] thinkpad_acpi: battery 1 registered (start 0, stop 100) |
| [ 12.833853] battery: new extension: ThinkPad Battery Extension |
| [ 12.838206] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input19 |
| [ 12.841847] wl: module verification failed: signature and/or required key missing - tainting kernel |
| [ 12.846373] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer |
| [ 12.848192] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules |
| [ 12.850019] RAPL PMU: hw unit of domain package 2^-16 Joules |
| [ 12.851813] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules |
| [ 12.870434] input: PC Speaker as /devices/platform/pcspkr/input/input20 |
| [ 12.879623] wlan0: Broadcom BCM43a0 802.11 Hybrid Wireless Controller 6.30.223.271 (r587334) |
| |
| [ 12.918983] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) |
| [ 12.968602] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker |
| [ 12.970499] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) |
| [ 12.972662] snd_hda_codec_realtek hdaudioC0D0: hp_outs=2 (0x15/0x1b/0x0/0x0/0x0) |
| [ 12.974598] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 |
| [ 12.976968] snd_hda_codec_realtek hdaudioC0D0: inputs: |
| [ 12.981264] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18 |
| [ 12.983190] snd_hda_codec_realtek hdaudioC0D0: Dock Mic=0x19 |
| [ 12.985933] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12 |
| [ 13.013266] snd_hda_codec_generic hdaudioC0D3: ignore pin 0x7, too many assigned pins |
| [ 13.014887] snd_hda_codec_generic hdaudioC0D3: autoconfig for Generic: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line |
| [ 13.016641] snd_hda_codec_generic hdaudioC0D3: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) |
| [ 13.018540] snd_hda_codec_generic hdaudioC0D3: hp_outs=0 (0x0/0x0/0x0/0x0/0x0) |
| [ 13.020401] snd_hda_codec_generic hdaudioC0D3: mono: mono_out=0x0 |
| [ 13.022250] snd_hda_codec_generic hdaudioC0D3: dig-out=0x5/0x6 |
| [ 13.024083] snd_hda_codec_generic hdaudioC0D3: inputs: |
| [ 13.027333] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21 |
| [ 13.029304] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input22 |
| [ 13.031229] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input23 |
| [ 13.033766] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input24 |
| [ 13.036317] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input25 |
| [ 13.038115] input: HDA Intel PCH HDMI as /devices/pci0000:00/0000:00:1b.0/sound/card0/input26 |
| [ 13.041061] input: HDA Intel PCH HDMI as /devices/pci0000:00/0000:00:1b.0/sound/card0/input27 |
| [ 13.145130] wl 0000:01:00.0 wlp1s0: renamed from wlan0 |
| [ 13.212769] Adding 16699388k swap on /dev/mapper/TP--T430s--vg-swap_1. Priority:-2 extents:1 across:16699388k SSFS |
| [ 13.254249] intel_rapl_common: Found RAPL domain package |
| [ 13.254250] intel_rapl_common: Found RAPL domain core |
| [ 13.254251] intel_rapl_common: Found RAPL domain uncore |
| [ 13.513472] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem |
| [ 13.519184] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null) |
| [ 13.662333] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) |
| [ 13.717560] audit: type=1400 audit(1572479351.898:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1263 comm="apparmor_parser" |
| [ 13.718941] audit: type=1400 audit(1572479351.898:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1263 comm="apparmor_parser" |
| [ 13.720345] audit: type=1400 audit(1572479351.898:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1263 comm="apparmor_parser" |
| [ 13.721659] audit: type=1400 audit(1572479351.898:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=1262 comm="apparmor_parser" |
| [ 13.723252] audit: type=1400 audit(1572479351.898:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="system_tor" pid=1265 comm="apparmor_parser" |
| [ 13.724578] audit: type=1400 audit(1572479351.898:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/mysqld" pid=1264 comm="apparmor_parser" |
| [ 13.728064] audit: type=1400 audit(1572479351.910:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/freshclam" pid=1268 comm="apparmor_parser" |
| [ 13.730744] audit: type=1400 audit(1572479351.910:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/haveged" pid=1270 comm="apparmor_parser" |
| [ 13.732871] audit: type=1400 audit(1572479351.914:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=1272 comm="apparmor_parser" |
| [ 13.733611] audit: type=1400 audit(1572479351.914:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=1271 comm="apparmor_parser" |
| [ 13.928731] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input28 |
| [ 13.960574] Process accounting resumed |
| [ 15.412854] mc: Linux media interface: v0.10 |
| [ 15.431553] videodev: Linux video capture interface: v2.00 |
| [ 15.449922] alg: No test for fips(ansi_cprng) (fips_ansi_cprng) |
| [ 15.539733] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:02d5) |
| [ 15.553965] Bluetooth: Core ver 2.22 |
| [ 15.555380] NET: Registered protocol family 31 |
| [ 15.556791] Bluetooth: HCI device and connection manager initialized |
| [ 15.559613] Bluetooth: HCI socket layer initialized |
| [ 15.561078] Bluetooth: L2CAP socket layer initialized |
| [ 15.562496] Bluetooth: SCO socket layer initialized |
| [ 15.598270] uvcvideo 1-1.6:1.0: Entity type for entity Extension 4 was not initialized! |
| [ 15.598275] uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized! |
| [ 15.598277] uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized! |
| [ 15.598279] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized! |
| [ 15.598444] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input29 |
| [ 15.599914] usbcore: registered new interface driver uvcvideo |
| [ 15.599917] USB Video Class driver (1.1.1) |
| [ 15.603761] usbcore: registered new interface driver btusb |
| [ 15.692239] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 |
| [ 15.692242] Bluetooth: BNEP filters: protocol multicast |
| [ 15.692247] Bluetooth: BNEP socket layer initialized |
| [ 15.714584] Bluetooth: hci0: BCM: chip id 63 |
| [ 15.715646] Bluetooth: hci0: BCM: features 0x07 |
| [ 15.731583] Bluetooth: hci0: TP-T430s |
| [ 15.732578] Bluetooth: hci0: BCM20702A1 (001.002.014) build 1669 |
| [ 15.737648] bluetooth hci0: firmware: direct-loading firmware brcm/BCM20702A1-0a5c-21e6.hcd |
| [ 16.606589] Bluetooth: hci0: BCM20702A1 (001.002.014) build 1669 |
| [ 16.622591] Bluetooth: hci0: Broadcom Bluetooth Device |
| [ 16.704698] Bluetooth: RFCOMM TTY layer initialized |
| [ 16.704707] Bluetooth: RFCOMM socket layer initialized |
| [ 16.704712] Bluetooth: RFCOMM ver 1.11 |
| [ 17.016302] usblp 4-1.5.2.1.2:1.0: usblp2: USB Bidirectional printer dev 9 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 |
| [ 17.016348] usbcore: registered new interface driver usblp |
| [ 17.053240] usbcore: registered new interface driver usbserial_generic |
| [ 17.053251] usbserial: USB Serial support registered for generic |
| [ 17.055858] usbcore: registered new interface driver pl2303 |
| [ 17.055872] usbserial: USB Serial support registered for pl2303 |
| [ 17.055904] pl2303 4-1.5.2.1.3:1.0: pl2303 converter detected |
| [ 17.098733] usb 4-1.5.2.1.3: pl2303 converter now attached to ttyUSB0 |
| [ 20.673042] rfkill: input handler disabled |
| [ 21.202421] e1000e: eno0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None |
| [ 21.202465] IPv6: ADDRCONF(NETDEV_CHANGE): eno0: link becomes ready |
| [ 21.848604] kauditd_printk_skb: 26 callbacks suppressed |
| [ 21.848607] audit: type=1400 audit(1572479360.026:38): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=3412 comm="apparmor_parser" |
| [ 22.017042] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. |
| [ 22.019742] Bridge firewalling registered |
| [ 22.387501] Initializing XFRM netlink socket |
| [ 27.219226] e1000e: eno0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None |
| [ 28.709541] rfkill: input handler enabled |
| [ 29.755232] fuse: init (API version 7.31) |
| [ 32.531511] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. |
| [ 32.643336] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready |
| [ 32.808146] rfkill: input handler disabled |