| [ 0.000000] Linux version 5.2.0-3-amd64 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-23)) #1 SMP Debian 5.2.17-1 (2019-10-06) |
| [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-5.2.0-3-amd64 root=/dev/mapper/TP--T430s--vg-root ro iomem=relaxed |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' |
| [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 |
| [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. |
| [ 0.000000] BIOS-provided physical RAM map: |
| [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ff23fff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000007ff24000-0x00000000829fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000047b5fffff] usable |
| [ 0.000000] NX (Execute Disable) protection: active |
| [ 0.000000] SMBIOS 2.8 present. |
| [ 0.000000] DMI: LENOVO 23532NU/23532NU, BIOS CBET4000 4.10-1056-g40377c7250 10/19/2019 |
| [ 0.000000] tsc: Fast TSC calibration using PIT |
| [ 0.000000] tsc: Detected 2893.401 MHz processor |
| [ 0.002003] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| [ 0.002005] e820: remove [mem 0x000a0000-0x000fffff] usable |
| [ 0.002008] last_pfn = 0x47b600 max_arch_pfn = 0x400000000 |
| [ 0.002012] MTRR default type: write-back |
| [ 0.002013] MTRR fixed ranges enabled: |
| [ 0.002014] 00000-9FFFF write-back |
| [ 0.002014] A0000-BFFFF uncachable |
| [ 0.002015] C0000-FFFFF write-back |
| [ 0.002016] MTRR variable ranges enabled: |
| [ 0.002017] 0 base 080000000 mask FC0000000 uncachable |
| [ 0.002018] 1 base 0C0000000 mask FF0000000 uncachable |
| [ 0.002018] 2 base 0D0000000 mask FF0000000 write-combining |
| [ 0.002019] 3 base 0E0000000 mask FE0000000 uncachable |
| [ 0.002019] 4 disabled |
| [ 0.002020] 5 disabled |
| [ 0.002020] 6 disabled |
| [ 0.002021] 7 disabled |
| [ 0.002021] 8 disabled |
| [ 0.002021] 9 disabled |
| [ 0.002768] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT |
| [ 0.003124] last_pfn = 0x7ff24 max_arch_pfn = 0x400000000 |
| [ 0.012558] BRK [0x27c601000, 0x27c601fff] PGTABLE |
| [ 0.012559] BRK [0x27c602000, 0x27c602fff] PGTABLE |
| [ 0.012560] BRK [0x27c603000, 0x27c603fff] PGTABLE |
| [ 0.012589] BRK [0x27c604000, 0x27c604fff] PGTABLE |
| [ 0.012590] BRK [0x27c605000, 0x27c605fff] PGTABLE |
| [ 0.012680] BRK [0x27c606000, 0x27c606fff] PGTABLE |
| [ 0.012703] BRK [0x27c607000, 0x27c607fff] PGTABLE |
| [ 0.012876] RAMDISK: [mem 0x310f7000-0x34872fff] |
| [ 0.012882] ACPI: Early table checksum verification disabled |
| [ 0.012938] ACPI: RSDP 0x00000000000F6770 000024 (v02 COREv4) |
| [ 0.012942] ACPI: XSDT 0x000000007FF4A0E0 00005C (v01 COREv4 COREBOOT 00000000 CORE 20190703) |
| [ 0.012946] ACPI: FACP 0x000000007FF4DBC0 0000F4 (v04 COREv4 COREBOOT 00000000 CORE 20190703) |
| [ 0.012951] ACPI: DSDT 0x000000007FF4A280 003937 (v02 COREv4 COREBOOT 20110725 INTL 20190703) |
| [ 0.012954] ACPI: FACS 0x000000007FF4A240 000040 |
| [ 0.012956] ACPI: FACS 0x000000007FF4A240 000040 |
| [ 0.012958] ACPI: SSDT 0x000000007FF4DCC0 001B03 (v02 COREv4 COREBOOT 0000002A CORE 20190703) |
| [ 0.012961] ACPI: MCFG 0x000000007FF4F7D0 00003C (v01 COREv4 COREBOOT 00000000 CORE 20190703) |
| [ 0.012963] ACPI: TCPA 0x000000007FF4F810 000032 (v02 COREv4 COREBOOT 00000000 CORE 20190703) |
| [ 0.012966] ACPI: APIC 0x000000007FF4F850 00006C (v02 COREv4 COREBOOT 00000000 CORE 20190703) |
| [ 0.012968] ACPI: DMAR 0x000000007FF4F8C0 0000D0 (v01 COREv4 COREBOOT 00000000 CORE 20190703) |
| [ 0.012971] ACPI: HPET 0x000000007FF51990 000038 (v01 COREv4 COREBOOT 00000000 CORE 20190703) |
| [ 0.012978] ACPI: Local APIC address 0xfee00000 |
| [ 0.013069] No NUMA configuration found |
| [ 0.013070] Faking a node at [mem 0x0000000000000000-0x000000047b5fffff] |
| [ 0.013074] NODE_DATA(0) allocated [mem 0x47b5ee000-0x47b5f2fff] |
| [ 0.013102] Zone ranges: |
| [ 0.013103] DMA [mem 0x0000000000001000-0x0000000000ffffff] |
| [ 0.013105] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] |
| [ 0.013106] Normal [mem 0x0000000100000000-0x000000047b5fffff] |
| [ 0.013107] Device empty |
| [ 0.013108] Movable zone start for each node |
| [ 0.013108] Early memory node ranges |
| [ 0.013109] node 0: [mem 0x0000000000001000-0x000000000009efff] |
| [ 0.013110] node 0: [mem 0x0000000000100000-0x000000007ff23fff] |
| [ 0.013111] node 0: [mem 0x0000000100000000-0x000000047b5fffff] |
| [ 0.013119] Zeroed struct page in unavailable ranges: 318 pages |
| [ 0.013120] Initmem setup node 0 [mem 0x0000000000001000-0x000000047b5fffff] |
| [ 0.013122] On node 0 totalpages: 4175042 |
| [ 0.013123] DMA zone: 64 pages used for memmap |
| [ 0.013123] DMA zone: 21 pages reserved |
| [ 0.013124] DMA zone: 3998 pages, LIFO batch:0 |
| [ 0.013172] DMA32 zone: 8125 pages used for memmap |
| [ 0.013173] DMA32 zone: 519972 pages, LIFO batch:63 |
| [ 0.020912] Normal zone: 57048 pages used for memmap |
| [ 0.020913] Normal zone: 3651072 pages, LIFO batch:63 |
| [ 0.059523] Reserving Intel graphics memory at [mem 0x80a00000-0x829fffff] |
| [ 0.059807] ACPI: PM-Timer IO Port: 0x508 |
| [ 0.059809] ACPI: Local APIC address 0xfee00000 |
| [ 0.059825] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 |
| [ 0.059827] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) |
| [ 0.059829] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) |
| [ 0.059830] ACPI: IRQ0 used by override. |
| [ 0.059831] ACPI: IRQ9 used by override. |
| [ 0.059832] Using ACPI (MADT) for SMP configuration information |
| [ 0.059834] ACPI: HPET id: 0x8086a701 base: 0xfed00000 |
| [ 0.059838] smpboot: Allowing 4 CPUs, 0 hotplug CPUs |
| [ 0.059848] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] |
| [ 0.059849] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] |
| [ 0.059850] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] |
| [ 0.059851] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] |
| [ 0.059852] PM: Registered nosave memory: [mem 0x7ff24000-0x829fffff] |
| [ 0.059852] PM: Registered nosave memory: [mem 0x82a00000-0xefffffff] |
| [ 0.059853] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff] |
| [ 0.059854] PM: Registered nosave memory: [mem 0xf4000000-0xfed3ffff] |
| [ 0.059855] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff] |
| [ 0.059855] PM: Registered nosave memory: [mem 0xfed45000-0xfed8ffff] |
| [ 0.059856] PM: Registered nosave memory: [mem 0xfed90000-0xfed91fff] |
| [ 0.059857] PM: Registered nosave memory: [mem 0xfed92000-0xffffffff] |
| [ 0.059859] [mem 0x82a00000-0xefffffff] available for PCI devices |
| [ 0.059860] Booting paravirtualized kernel on bare hardware |
| [ 0.059862] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns |
| [ 0.143011] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 |
| [ 0.143189] percpu: Embedded 53 pages/cpu s176984 r8192 d31912 u524288 |
| [ 0.143196] pcpu-alloc: s176984 r8192 d31912 u524288 alloc=1*2097152 |
| [ 0.143197] pcpu-alloc: [0] 0 1 2 3 |
| [ 0.143213] Built 1 zonelists, mobility grouping on. Total pages: 4109784 |
| [ 0.143214] Policy zone: Normal |
| [ 0.143216] Kernel command line: BOOT_IMAGE=/vmlinuz-5.2.0-3-amd64 root=/dev/mapper/TP--T430s--vg-root ro iomem=relaxed |
| [ 0.146299] Calgary: detecting Calgary via BIOS EBDA area |
| [ 0.146304] Calgary: Unable to locate Rio Grande table in EBDA - bailing! |
| [ 0.184723] Memory: 16289468K/16700168K available (10243K kernel code, 1186K rwdata, 3520K rodata, 1640K init, 2168K bss, 410700K reserved, 0K cma-reserved) |
| [ 0.184826] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 |
| [ 0.184836] Kernel/User page tables isolation: enabled |
| [ 0.184848] ftrace: allocating 32795 entries in 129 pages |
| [ 0.195605] rcu: Hierarchical RCU implementation. |
| [ 0.195608] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4. |
| [ 0.195609] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. |
| [ 0.195610] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 |
| [ 0.198638] NR_IRQS: 33024, nr_irqs: 456, preallocated irqs: 16 |
| [ 0.198847] random: crng done (trusting CPU's manufacturer) |
| [ 0.200422] Console: colour VGA+ 80x25 |
| [ 0.205745] printk: console [tty0] enabled |
| [ 0.205813] ACPI: Core revision 20190509 |
| [ 0.206001] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns |
| [ 0.206083] hpet clockevent registered |
| [ 0.206087] APIC: Switch to symmetric I/O mode setup |
| [ 0.206144] DMAR: Host address width 36 |
| [ 0.206199] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 |
| [ 0.206259] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a |
| [ 0.206329] DMAR: RMRR base: 0x00000080800000 end: 0x000000829fffff |
| [ 0.206385] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 |
| [ 0.206444] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a |
| [ 0.206513] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 |
| [ 0.206571] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 |
| [ 0.206628] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. |
| [ 0.207090] DMAR-IR: Enabled IRQ remapping in x2apic mode |
| [ 0.207147] x2apic enabled |
| [ 0.207205] Switched APIC routing to cluster x2apic. |
| [ 0.207691] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 |
| [ 0.226088] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x29b4e96ecc9, max_idle_ns: 440795280616 ns |
| [ 0.226166] Calibrating delay loop (skipped), value calculated using timer frequency.. 5786.80 BogoMIPS (lpj=11573604) |
| [ 0.226241] pid_max: default: 32768 minimum: 301 |
| [ 0.226320] LSM: Security Framework initializing |
| [ 0.226378] Yama: disabled by default; enable with sysctl kernel.yama.* |
| [ 0.226456] AppArmor: AppArmor initialized |
| [ 0.226510] TOMOYO Linux initialized |
| [ 0.228688] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) |
| [ 0.229834] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) |
| [ 0.229952] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) |
| [ 0.230044] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) |
| [ 0.230382] mce: CPU0: Thermal monitoring enabled (TM1) |
| [ 0.230447] process: using mwait in idle threads |
| [ 0.230505] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 |
| [ 0.230561] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 |
| [ 0.230620] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization |
| [ 0.230690] Spectre V2 : Mitigation: Full generic retpoline |
| [ 0.230748] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch |
| [ 0.230817] Spectre V2 : Enabling Restricted Speculation for firmware calls |
| [ 0.230878] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier |
| [ 0.230948] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl |
| [ 0.231008] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp |
| [ 0.231083] MDS: Mitigation: Clear CPU buffers |
| [ 0.231281] Freeing SMP alternatives memory: 24K |
| [ 0.232911] TSC deadline timer enabled |
| [ 0.232914] smpboot: CPU0: Intel(R) Core(TM) i7-3520M CPU @ 2.90GHz (family: 0x6, model: 0x3a, stepping: 0x9) |
| [ 0.233094] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. |
| [ 0.233174] ... version: 3 |
| [ 0.233228] ... bit width: 48 |
| [ 0.233283] ... generic registers: 4 |
| [ 0.233338] ... value mask: 0000ffffffffffff |
| [ 0.233392] ... max period: 00007fffffffffff |
| [ 0.233450] ... fixed-purpose events: 3 |
| [ 0.233505] ... event mask: 000000070000000f |
| [ 0.233594] rcu: Hierarchical SRCU implementation. |
| [ 0.234111] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. |
| [ 0.234163] smp: Bringing up secondary CPUs ... |
| [ 0.234163] x86: Booting SMP configuration: |
| [ 0.234163] .... node #0, CPUs: #1 |
| [ 0.234289] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. |
| [ 0.234429] #2 #3 |
| [ 0.238213] smp: Brought up 1 node, 4 CPUs |
| [ 0.238275] smpboot: Max logical packages: 1 |
| [ 0.238331] smpboot: Total of 4 processors activated (23147.20 BogoMIPS) |
| [ 0.241431] devtmpfs: initialized |
| [ 0.241431] x86/mm: Memory block size: 128MB |
| [ 0.243052] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns |
| [ 0.243052] futex hash table entries: 1024 (order: 4, 65536 bytes) |
| [ 0.243052] pinctrl core: initialized pinctrl subsystem |
| [ 0.243052] NET: Registered protocol family 16 |
| [ 0.243052] audit: initializing netlink subsys (disabled) |
| [ 0.243052] audit: type=2000 audit(1571521762.036:1): state=initialized audit_enabled=0 res=1 |
| [ 0.243052] cpuidle: using governor ladder |
| [ 0.243052] cpuidle: using governor menu |
| [ 0.243052] ACPI: bus type PCI registered |
| [ 0.243052] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 |
| [ 0.243052] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) |
| [ 0.243844] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 |
| [ 0.243912] PCI: Using configuration type 1 for base access |
| [ 0.243986] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on |
| [ 0.246318] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages |
| [ 0.390366] alg: No test for lzo-rle (lzo-rle-generic) |
| [ 0.390366] alg: No test for lzo-rle (lzo-rle-scomp) |
| [ 0.390366] ACPI: Added _OSI(Module Device) |
| [ 0.390366] ACPI: Added _OSI(Processor Device) |
| [ 0.390366] ACPI: Added _OSI(3.0 _SCP Extensions) |
| [ 0.390366] ACPI: Added _OSI(Processor Aggregator Device) |
| [ 0.390414] ACPI: Added _OSI(Linux-Dell-Video) |
| [ 0.390471] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) |
| [ 0.390528] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) |
| [ 0.394165] ACPI: 2 ACPI AML tables successfully acquired and loaded |
| [ 0.394165] ACPI: EC: EC started |
| [ 0.394165] ACPI: EC: interrupt blocked |
| [ 0.394165] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC |
| [ 0.394165] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62 |
| [ 0.394165] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC used to handle transactions |
| [ 0.394165] ACPI: Interpreter enabled |
| [ 0.394165] ACPI: (supports S0 S3 S4 S5) |
| [ 0.394165] ACPI: Using IOAPIC for interrupt routing |
| [ 0.394180] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| [ 0.394360] ACPI: Enabled 1 GPEs in block 00 to 3F |
| [ 0.397124] ACPI: Power Resource [FPWR] (off) |
| [ 0.397419] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) |
| [ 0.397481] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] |
| [ 0.397588] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] |
| [ 0.397666] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge |
| [ 0.397775] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff window] (conflicts with Video ROM [mem 0x000c0000-0x000cf1ff]) |
| [ 0.398170] acpi PNP0A08:00: ignoring host bridge window [mem 0x000d0000-0x000d3fff window] (conflicts with Adapter ROM [mem 0x000cf800-0x000d05ff]) |
| [ 0.398378] PCI host bridge to bus 0000:00 |
| [ 0.398436] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] |
| [ 0.398496] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] |
| [ 0.398555] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] |
| [ 0.398623] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] |
| [ 0.398692] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] |
| [ 0.398761] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] |
| [ 0.398831] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] |
| [ 0.398900] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] |
| [ 0.398969] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] |
| [ 0.399039] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] |
| [ 0.399109] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] |
| [ 0.399180] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window] |
| [ 0.399250] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window] |
| [ 0.399318] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window] |
| [ 0.399387] pci_bus 0000:00: root bus resource [mem 0x82a00000-0xefffffff window] |
| [ 0.399457] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] |
| [ 0.399526] pci_bus 0000:00: root bus resource [bus 00-ff] |
| [ 0.399589] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000 |
| [ 0.399725] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000 |
| [ 0.399791] pci 0000:00:02.0: reg 0x10: [mem 0xe2400000-0xe27fffff 64bit] |
| [ 0.399855] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref] |
| [ 0.399926] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f] |
| [ 0.400043] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000 |
| [ 0.400110] pci 0000:00:04.0: reg 0x10: [mem 0xe2b30000-0xe2b37fff 64bit] |
| [ 0.400251] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330 |
| [ 0.400330] pci 0000:00:14.0: reg 0x10: [mem 0xe2b20000-0xe2b2ffff 64bit] |
| [ 0.400456] pci 0000:00:14.0: PME# supported from D3hot D3cold |
| [ 0.400581] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000 |
| [ 0.400655] pci 0000:00:19.0: reg 0x10: [mem 0xe2b00000-0xe2b1ffff] |
| [ 0.400718] pci 0000:00:19.0: reg 0x14: [mem 0xe2b3c000-0xe2b3cfff] |
| [ 0.400783] pci 0000:00:19.0: reg 0x18: [io 0x4040-0x405f] |
| [ 0.400896] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold |
| [ 0.401012] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 |
| [ 0.401088] pci 0000:00:1a.0: reg 0x10: [mem 0xe2b3f000-0xe2b3f3ff] |
| [ 0.401225] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold |
| [ 0.401347] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300 |
| [ 0.401425] pci 0000:00:1b.0: reg 0x10: [mem 0xe2b38000-0xe2b3bfff 64bit] |
| [ 0.401553] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold |
| [ 0.401679] pci 0000:00:1c.0: [8086:1e12] type 01 class 0x060400 |
| [ 0.401889] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold |
| [ 0.401977] pci 0000:00:1c.0: Enabling MPC IRBNCE |
| [ 0.402035] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled |
| [ 0.402166] pci 0000:00:1c.1: [8086:1e14] type 01 class 0x060400 |
| [ 0.402400] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold |
| [ 0.402486] pci 0000:00:1c.1: Enabling MPC IRBNCE |
| [ 0.402543] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled |
| [ 0.402675] pci 0000:00:1c.2: [8086:1e18] type 01 class 0x060400 |
| [ 0.402909] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold |
| [ 0.402993] pci 0000:00:1c.2: Enabling MPC IRBNCE |
| [ 0.403050] pci 0000:00:1c.2: Intel PCH root port ACS workaround enabled |
| [ 0.403180] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 |
| [ 0.403257] pci 0000:00:1d.0: reg 0x10: [mem 0xe2b40000-0xe2b403ff] |
| [ 0.403395] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold |
| [ 0.403516] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100 |
| [ 0.403731] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601 |
| [ 0.403807] pci 0000:00:1f.2: reg 0x10: [io 0x4080-0x4087] |
| [ 0.403871] pci 0000:00:1f.2: reg 0x14: [io 0x4090-0x4093] |
| [ 0.403934] pci 0000:00:1f.2: reg 0x18: [io 0x4088-0x408f] |
| [ 0.403999] pci 0000:00:1f.2: reg 0x1c: [io 0x4094-0x4097] |
| [ 0.404063] pci 0000:00:1f.2: reg 0x20: [io 0x4060-0x407f] |
| [ 0.404127] pci 0000:00:1f.2: reg 0x24: [mem 0xe2b3e000-0xe2b3e7ff] |
| [ 0.404227] pci 0000:00:1f.2: PME# supported from D3hot |
| [ 0.404343] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500 |
| [ 0.404416] pci 0000:00:1f.3: reg 0x10: [mem 0xe2b41000-0xe2b410ff 64bit] |
| [ 0.404494] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f] |
| [ 0.404623] pci 0000:00:1f.6: [8086:1e24] type 00 class 0x118000 |
| [ 0.404703] pci 0000:00:1f.6: reg 0x10: [mem 0xe2b3d000-0xe2b3dfff 64bit] |
| [ 0.404980] pci 0000:01:00.0: [14e4:43a0] type 00 class 0x028000 |
| [ 0.405134] pci 0000:01:00.0: reg 0x10: [mem 0xe2a00000-0xe2a07fff 64bit] |
| [ 0.405251] pci 0000:01:00.0: reg 0x18: [mem 0xe2800000-0xe29fffff 64bit] |
| [ 0.405559] pci 0000:01:00.0: supports D1 D2 |
| [ 0.405615] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.405944] pci 0000:00:1c.0: PCI bridge to [bus 01] |
| [ 0.406007] pci 0000:00:1c.0: bridge window [mem 0xe2800000-0xe2afffff] |
| [ 0.406201] pci 0000:02:00.0: [1180:e822] type 00 class 0x080500 |
| [ 0.406493] pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz. |
| [ 0.406798] pci 0000:02:00.0: reg 0x10: [mem 0xe0800000-0xe08000ff] |
| [ 0.407359] pci 0000:02:00.0: supports D1 D2 |
| [ 0.407415] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.407846] pci 0000:00:1c.1: PCI bridge to [bus 02] |
| [ 0.407906] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff] |
| [ 0.407966] pci 0000:00:1c.1: bridge window [mem 0xe0000000-0xe08fffff] |
| [ 0.408031] pci 0000:00:1c.1: bridge window [mem 0xe0c00000-0xe13fffff 64bit pref] |
| [ 0.408167] pci 0000:00:1c.2: PCI bridge to [bus 03] |
| [ 0.408226] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff] |
| [ 0.408289] pci 0000:00:1c.2: bridge window [mem 0xe1c00000-0xe23fffff] |
| [ 0.408353] pci 0000:00:1c.2: bridge window [mem 0xe1400000-0xe1bfffff 64bit pref] |
| [ 0.408563] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.408657] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.408750] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.408842] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.408936] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.409027] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.409118] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.409210] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.410169] ACPI: EC: interrupt unblocked |
| [ 0.410169] ACPI: EC: event unblocked |
| [ 0.410169] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62 |
| [ 0.410169] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC used to handle transactions and events |
| [ 0.410174] pci 0000:00:02.0: vgaarb: setting as boot VGA device |
| [ 0.410229] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none |
| [ 0.410229] pci 0000:00:02.0: vgaarb: bridge control possible |
| [ 0.410229] vgaarb: loaded |
| [ 0.410333] EDAC MC: Ver: 3.0.0 |
| [ 0.414186] PCI: Using ACPI for IRQ routing |
| [ 0.415701] PCI: pci_cache_line_size set to 64 bytes |
| [ 0.416239] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] |
| [ 0.416240] e820: reserve RAM buffer [mem 0x7ff24000-0x7fffffff] |
| [ 0.416242] e820: reserve RAM buffer [mem 0x47b600000-0x47bffffff] |
| [ 0.416749] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 |
| [ 0.416811] hpet0: 8 comparators, 64-bit 14.318180 MHz counter |
| [ 0.418183] clocksource: Switched to clocksource tsc-early |
| [ 0.427825] VFS: Disk quotas dquot_6.6.0 |
| [ 0.427897] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) |
| [ 0.428059] AppArmor: AppArmor Filesystem Enabled |
| [ 0.428131] pnp: PnP ACPI init |
| [ 0.428317] pnp 00:00: [Firmware Bug]: PNP resource [mem 0xf0000000-0x12fffffff] covers only part of 0000:00:00.0 Intel MCH; extending to [mem 0xfed10000-0xfed17fff] |
| [ 0.428426] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved |
| [ 0.428485] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved |
| [ 0.428543] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved |
| [ 0.428601] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved |
| [ 0.428660] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved |
| [ 0.429926] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved |
| [ 0.429986] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved |
| [ 0.430044] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved |
| [ 0.430104] system 00:00: [mem 0x20000000-0x201fffff] could not be reserved |
| [ 0.430164] system 00:00: [mem 0x40000000-0x401fffff] could not be reserved |
| [ 0.430236] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) |
| [ 0.430631] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved |
| [ 0.430693] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) |
| [ 0.430725] system 00:02: [io 0x0500-0x057f] has been reserved |
| [ 0.430783] system 00:02: [io 0x0480-0x04bf] has been reserved |
| [ 0.430844] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) |
| [ 0.430860] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) |
| [ 0.430882] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) |
| [ 0.430902] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active) |
| [ 0.430920] pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active) |
| [ 0.430935] pnp: PnP ACPI: found 7 devices |
| [ 0.436531] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns |
| [ 0.436611] pci 0000:00:1c.0: PCI bridge to [bus 01] |
| [ 0.436674] pci 0000:00:1c.0: bridge window [mem 0xe2800000-0xe2afffff] |
| [ 0.436744] pci 0000:00:1c.1: PCI bridge to [bus 02] |
| [ 0.436803] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff] |
| [ 0.436865] pci 0000:00:1c.1: bridge window [mem 0xe0000000-0xe08fffff] |
| [ 0.436927] pci 0000:00:1c.1: bridge window [mem 0xe0c00000-0xe13fffff 64bit pref] |
| [ 0.437004] pci 0000:00:1c.2: PCI bridge to [bus 03] |
| [ 0.437060] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff] |
| [ 0.437121] pci 0000:00:1c.2: bridge window [mem 0xe1c00000-0xe23fffff] |
| [ 0.437184] pci 0000:00:1c.2: bridge window [mem 0xe1400000-0xe1bfffff 64bit pref] |
| [ 0.437261] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] |
| [ 0.437320] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] |
| [ 0.437380] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] |
| [ 0.437438] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] |
| [ 0.437497] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window] |
| [ 0.437557] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window] |
| [ 0.437616] pci_bus 0000:00: resource 10 [mem 0x000d4000-0x000d7fff window] |
| [ 0.437675] pci_bus 0000:00: resource 11 [mem 0x000d8000-0x000dbfff window] |
| [ 0.437734] pci_bus 0000:00: resource 12 [mem 0x000dc000-0x000dffff window] |
| [ 0.437794] pci_bus 0000:00: resource 13 [mem 0x000e0000-0x000e3fff window] |
| [ 0.437854] pci_bus 0000:00: resource 14 [mem 0x000e4000-0x000e7fff window] |
| [ 0.437913] pci_bus 0000:00: resource 15 [mem 0x000e8000-0x000ebfff window] |
| [ 0.437973] pci_bus 0000:00: resource 16 [mem 0x000ec000-0x000effff window] |
| [ 0.438033] pci_bus 0000:00: resource 17 [mem 0x000f0000-0x000fffff window] |
| [ 0.438094] pci_bus 0000:00: resource 18 [mem 0x82a00000-0xefffffff window] |
| [ 0.438153] pci_bus 0000:00: resource 19 [mem 0xfed40000-0xfed44fff window] |
| [ 0.438215] pci_bus 0000:01: resource 1 [mem 0xe2800000-0xe2afffff] |
| [ 0.438272] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] |
| [ 0.438331] pci_bus 0000:02: resource 1 [mem 0xe0000000-0xe08fffff] |
| [ 0.438389] pci_bus 0000:02: resource 2 [mem 0xe0c00000-0xe13fffff 64bit pref] |
| [ 0.438459] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff] |
| [ 0.438517] pci_bus 0000:03: resource 1 [mem 0xe1c00000-0xe23fffff] |
| [ 0.438575] pci_bus 0000:03: resource 2 [mem 0xe1400000-0xe1bfffff 64bit pref] |
| [ 0.438706] NET: Registered protocol family 2 |
| [ 0.438901] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes) |
| [ 0.439018] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) |
| [ 0.439258] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) |
| [ 0.439419] TCP: Hash tables configured (established 131072 bind 65536) |
| [ 0.439507] UDP hash table entries: 8192 (order: 6, 262144 bytes) |
| [ 0.439600] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) |
| [ 0.439718] NET: Registered protocol family 1 |
| [ 0.439779] NET: Registered protocol family 44 |
| [ 0.439843] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] |
| [ 0.440530] PCI: CLS 64 bytes, default 64 |
| [ 0.440621] Trying to unpack rootfs image as initramfs... |
| [ 1.177913] Freeing initrd memory: 56816K |
| [ 1.178015] DMAR: No ATSR found |
| [ 1.178100] DMAR: dmar0: Using Queued invalidation |
| [ 1.178160] DMAR: dmar1: Using Queued invalidation |
| [ 1.248643] pci 0000:00:02.0: DMAR: Software identity mapping |
| [ 1.248706] DMAR: Setting RMRR: |
| [ 1.248763] pci 0000:00:02.0: DMAR: Setting identity map [0x80800000 - 0x829fffff] |
| [ 1.248986] DMAR: Prepare 0-16MiB unity mapping for LPC |
| [ 1.249093] pci 0000:00:1f.0: DMAR: Setting identity map [0x0 - 0xffffff] |
| [ 1.249410] DMAR: Intel(R) Virtualization Technology for Directed I/O |
| [ 1.249538] pci 0000:00:00.0: Adding to iommu group 0 |
| [ 1.249604] pci 0000:00:02.0: Adding to iommu group 1 |
| [ 1.249669] pci 0000:00:04.0: Adding to iommu group 2 |
| [ 1.249733] pci 0000:00:14.0: Adding to iommu group 3 |
| [ 1.249798] pci 0000:00:19.0: Adding to iommu group 4 |
| [ 1.249863] pci 0000:00:1a.0: Adding to iommu group 5 |
| [ 1.249927] pci 0000:00:1b.0: Adding to iommu group 6 |
| [ 1.249992] pci 0000:00:1c.0: Adding to iommu group 7 |
| [ 1.250056] pci 0000:00:1c.1: Adding to iommu group 8 |
| [ 1.250121] pci 0000:00:1c.2: Adding to iommu group 9 |
| [ 1.250191] pci 0000:00:1d.0: Adding to iommu group 10 |
| [ 1.250265] pci 0000:00:1f.0: Adding to iommu group 11 |
| [ 1.250330] pci 0000:00:1f.2: Adding to iommu group 11 |
| [ 1.250395] pci 0000:00:1f.3: Adding to iommu group 11 |
| [ 1.250460] pci 0000:00:1f.6: Adding to iommu group 11 |
| [ 1.250525] pci 0000:01:00.0: Adding to iommu group 12 |
| [ 1.250587] pci 0000:02:00.0: Adding to iommu group 13 |
| [ 1.252647] Initialise system trusted keyrings |
| [ 1.252710] Key type blacklist registered |
| [ 1.252803] workingset: timestamp_bits=40 max_order=22 bucket_order=0 |
| [ 1.253907] zbud: loaded |
| [ 1.254254] Platform Keyring initialized |
| [ 1.254313] Key type asymmetric registered |
| [ 1.254369] Asymmetric key parser 'x509' registered |
| [ 1.254432] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) |
| [ 1.254539] io scheduler mq-deadline registered |
| [ 1.254850] pcieport 0000:00:1c.0: PME: Signaling with IRQ 26 |
| [ 1.255114] pcieport 0000:00:1c.1: PME: Signaling with IRQ 27 |
| [ 1.255200] pcieport 0000:00:1c.1: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+ |
| [ 1.255519] pcieport 0000:00:1c.2: PME: Signaling with IRQ 28 |
| [ 1.255602] pcieport 0000:00:1c.2: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+ |
| [ 1.255795] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 |
| [ 1.255867] intel_idle: MWAIT substates: 0x21120 |
| [ 1.255867] intel_idle: v0.4.1 model 0x3A |
| [ 1.256014] intel_idle: lapic_timer_reliable_states 0xffffffff |
| [ 1.257685] thermal LNXTHERM:00: registered as thermal_zone0 |
| [ 1.257745] ACPI: Thermal Zone [THM0] (60 C) |
| [ 1.258787] thermal LNXTHERM:01: registered as thermal_zone1 |
| [ 1.258847] ACPI: Thermal Zone [THM1] (27 C) |
| [ 1.258986] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
| [ 1.259430] Linux agpgart interface v0.103 |
| [ 1.259528] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de> |
| [ 1.259587] AMD-Vi: AMD IOMMUv2 functionality not available on this system |
| [ 1.259841] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 |
| [ 1.261588] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| [ 1.261649] serio: i8042 AUX port at 0x60,0x64 irq 12 |
| [ 1.261793] mousedev: PS/2 mouse device common for all mice |
| [ 1.261886] rtc_cmos 00:03: RTC can wake from S4 |
| [ 1.262088] rtc_cmos 00:03: registered as rtc0 |
| [ 1.262170] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs |
| [ 1.262256] intel_pstate: Intel P-state driver initializing |
| [ 1.262465] ledtrig-cpu: registered to indicate activity on CPUs |
| [ 1.263141] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 |
| [ 1.263413] NET: Registered protocol family 10 |
| [ 1.279017] Segment Routing with IPv6 |
| [ 1.279128] mip6: Mobile IPv6 |
| [ 1.279195] NET: Registered protocol family 17 |
| [ 1.279339] mpls_gso: MPLS GSO support |
| [ 1.279871] mce: Using 7 MCE banks |
| [ 1.280029] microcode: sig=0x306a9, pf=0x10, revision=0x21 |
| [ 1.280162] microcode: Microcode Update Driver: v2.2. |
| [ 1.280179] sched_clock: Marking stable (1272512578, 7344510)->(1285838902, -5981814) |
| [ 1.280639] registered taskstats version 1 |
| [ 1.280694] Loading compiled-in X.509 certificates |
| [ 1.312820] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' |
| [ 1.312904] Loaded X.509 cert 'Debian Secure Boot Signer: 00a7468def' |
| [ 1.312978] zswap: loaded using pool lzo/zbud |
| [ 1.313102] AppArmor: AppArmor sha1 policy hashing enabled |
| [ 1.313822] rtc_cmos 00:03: setting system clock to 2019-10-19T21:49:23 UTC (1571521763) |
| [ 1.316070] Freeing unused kernel image memory: 1640K |
| [ 1.346274] Write protecting the kernel read-only data: 16384k |
| [ 1.347339] Freeing unused kernel image memory: 2036K |
| [ 1.347797] Freeing unused kernel image memory: 576K |
| [ 1.361917] x86/mm: Checked W+X mappings: passed, no W+X pages found. |
| [ 1.361989] x86/mm: Checking user space page tables |
| [ 1.367678] x86/mm: Checked W+X mappings: passed, no W+X pages found. |
| [ 1.367736] Run /init as init process |
| [ 1.478541] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2a/PNP0C09:00/PNP0C0E:00/input/input2 |
| [ 1.478640] ACPI: Sleep Button [SLPB] |
| [ 1.478750] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2a/PNP0C09:00/PNP0C0D:00/input/input3 |
| [ 1.478838] ACPI: Lid Switch [LID] |
| [ 1.478952] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 |
| [ 1.479033] ACPI: Power Button [PWRF] |
| [ 1.491221] pps_core: LinuxPPS API ver. 1 registered |
| [ 1.491281] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> |
| [ 1.492465] PTP clock support registered |
| [ 1.502027] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k |
| [ 1.502087] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. |
| [ 1.503084] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode |
| [ 1.507790] ACPI: bus type USB registered |
| [ 1.507870] usbcore: registered new interface driver usbfs |
| [ 1.507938] usbcore: registered new interface driver hub |
| [ 1.508020] usbcore: registered new device driver usb |
| [ 1.513915] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| [ 1.515331] ehci-pci: EHCI PCI platform driver |
| [ 1.515532] ehci-pci 0000:00:1a.0: EHCI Host Controller |
| [ 1.515598] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 |
| [ 1.515682] ehci-pci 0000:00:1a.0: debug port 2 |
| [ 1.519804] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported |
| [ 1.519897] ehci-pci 0000:00:1a.0: irq 19, io mem 0xe2b3f000 |
| [ 1.534383] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 |
| [ 1.534512] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02 |
| [ 1.534585] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.534647] SCSI subsystem initialized |
| [ 1.534655] usb usb1: Product: EHCI Host Controller |
| [ 1.534767] usb usb1: Manufacturer: Linux 5.2.0-3-amd64 ehci_hcd |
| [ 1.534827] usb usb1: SerialNumber: 0000:00:1a.0 |
| [ 1.535019] hub 1-0:1.0: USB hub found |
| [ 1.535081] hub 1-0:1.0: 3 ports detected |
| [ 1.535391] ehci-pci 0000:00:1d.0: EHCI Host Controller |
| [ 1.535453] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 |
| [ 1.535534] ehci-pci 0000:00:1d.0: debug port 2 |
| [ 1.537480] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt |
| [ 1.539324] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20190509/utaddress-213) |
| [ 1.539491] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 1.539549] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported |
| [ 1.539589] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20190509/utaddress-213) |
| [ 1.539736] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 1.539954] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20190509/utaddress-213) |
| [ 1.540047] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 1.540628] ehci-pci 0000:00:1d.0: irq 18, io mem 0xe2b40000 |
| [ 1.540828] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20190509/utaddress-213) |
| [ 1.540921] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 1.540994] lpc_ich: Resource conflict(s) found affecting gpio_ich |
| [ 1.546201] libata version 3.00 loaded. |
| [ 1.551673] ahci 0000:00:1f.2: version 3.0 |
| [ 1.551847] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled |
| [ 1.554206] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 |
| [ 1.554322] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02 |
| [ 1.554393] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.554463] usb usb2: Product: EHCI Host Controller |
| [ 1.554520] usb usb2: Manufacturer: Linux 5.2.0-3-amd64 ehci_hcd |
| [ 1.554578] usb usb2: SerialNumber: 0000:00:1d.0 |
| [ 1.554759] hub 2-0:1.0: USB hub found |
| [ 1.554860] hub 2-0:1.0: 3 ports detected |
| [ 1.555080] xhci_hcd 0000:00:14.0: xHCI Host Controller |
| [ 1.555150] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 |
| [ 1.556324] xhci_hcd 0000:00:14.0: hcc params 0x200071a1 hci version 0x100 quirks 0x000000000000b930 |
| [ 1.556400] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported |
| [ 1.556615] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02 |
| [ 1.556687] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.556756] usb usb3: Product: xHCI Host Controller |
| [ 1.556814] usb usb3: Manufacturer: Linux 5.2.0-3-amd64 xhci-hcd |
| [ 1.556873] usb usb3: SerialNumber: 0000:00:14.0 |
| [ 1.557029] hub 3-0:1.0: USB hub found |
| [ 1.557096] hub 3-0:1.0: 4 ports detected |
| [ 1.557306] xhci_hcd 0000:00:14.0: xHCI Host Controller |
| [ 1.557366] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 |
| [ 1.557438] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed |
| [ 1.557775] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.02 |
| [ 1.557847] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.557916] usb usb4: Product: xHCI Host Controller |
| [ 1.557973] usb usb4: Manufacturer: Linux 5.2.0-3-amd64 xhci-hcd |
| [ 1.558032] usb usb4: SerialNumber: 0000:00:14.0 |
| [ 1.558188] hub 4-0:1.0: USB hub found |
| [ 1.558255] hub 4-0:1.0: 4 ports detected |
| [ 1.562004] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x17 impl SATA mode |
| [ 1.562077] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst |
| [ 1.562807] scsi host0: ahci |
| [ 1.562998] scsi host1: ahci |
| [ 1.563147] scsi host2: ahci |
| [ 1.563301] scsi host3: ahci |
| [ 1.563451] scsi host4: ahci |
| [ 1.563597] scsi host5: ahci |
| [ 1.563705] ata1: SATA max UDMA/133 abar m2048@0xe2b3e000 port 0xe2b3e100 irq 30 |
| [ 1.563776] ata2: SATA max UDMA/133 abar m2048@0xe2b3e000 port 0xe2b3e180 irq 30 |
| [ 1.563847] ata3: SATA max UDMA/133 abar m2048@0xe2b3e000 port 0xe2b3e200 irq 30 |
| [ 1.563916] ata4: DUMMY |
| [ 1.563971] ata5: SATA max UDMA/133 abar m2048@0xe2b3e000 port 0xe2b3e300 irq 30 |
| [ 1.564041] ata6: DUMMY |
| [ 1.571422] cryptd: max_cpu_qlen set to 1000 |
| [ 1.572944] sdhci: Secure Digital Host Controller Interface driver |
| [ 1.573004] sdhci: Copyright(c) Pierre Ossman |
| [ 1.577306] sdhci-pci 0000:02:00.0: SDHCI controller found [1180:e822] (rev 7) |
| [ 1.578015] sdhci-pci 0000:02:00.0: Will use DMA mode even though HW doesn't fully claim to support it. |
| [ 1.578435] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes |
| [ 1.579761] sdhci-pci 0000:02:00.0: Will use DMA mode even though HW doesn't fully claim to support it. |
| [ 1.580711] mmc0: SDHCI controller on PCI [0000:02:00.0] using DMA |
| [ 1.592383] AVX version of gcm_enc/dec engaged. |
| [ 1.592443] AES CTR mode by8 optimization enabled |
| [ 1.640593] [drm] VT-d active for gfx access |
| [ 1.640659] i915 0000:00:02.0: vgaarb: deactivate vga console |
| [ 1.641749] Console: switching to colour dummy device 80x25 |
| [ 1.641805] [drm] DMAR active, disabling use of stolen memory |
| [ 1.664169] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock |
| [ 1.692907] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). |
| [ 1.692912] [drm] Driver supports precise vblank timestamp query. |
| [ 1.693165] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem |
| [ 1.713084] mmc0: new high speed SD card at address e42f |
| [ 1.717159] mmcblk0: mmc0:e42f SD02G 1.89 GiB |
| [ 1.718828] mmcblk0: p1 |
| [ 1.757361] [drm] Initialized i915 1.6.0 20190417 for 0000:00:02.0 on minor 0 |
| [ 1.757572] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) |
| [ 1.785977] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 3c:97:0e:46:56:66 |
| [ 1.785981] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection |
| [ 1.786022] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF |
| [ 1.787281] e1000e 0000:00:19.0 eno0: renamed from eth0 |
| [ 1.794777] acpi device:0d: registered as cooling_device5 |
| [ 1.794828] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6 |
| [ 1.870187] usb 1-1: new high-speed USB device number 2 using ehci-pci |
| [ 1.876645] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [ 1.877449] ata1.00: ATA-9: KINGSTON SKC400S37512G, SAFM001B, max UDMA/133 |
| [ 1.877453] ata1.00: 1000215216 sectors, multi 0: LBA48 NCQ (depth 32), AA |
| [ 1.877611] ata1.00: configured for UDMA/133 |
| [ 1.877736] scsi 0:0:0:0: Direct-Access ATA KINGSTON SKC400S 001B PQ: 0 ANSI: 5 |
| [ 1.894178] usb 2-1: new high-speed USB device number 2 using ehci-pci |
| [ 1.894195] usb 3-3: new high-speed USB device number 2 using xhci_hcd |
| [ 2.026497] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 |
| [ 2.026504] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 2.026653] hub 1-1:1.0: USB hub found |
| [ 2.026747] hub 1-1:1.0: 6 ports detected |
| [ 2.043907] usb 3-3: New USB device found, idVendor=2109, idProduct=2813, bcdDevice= 2.21 |
| [ 2.043912] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 2.043915] usb 3-3: Product: USB2.0 Hub |
| [ 2.043917] usb 3-3: Manufacturer: VIA Labs, Inc. |
| [ 2.044800] hub 3-3:1.0: USB hub found |
| [ 2.045007] hub 3-3:1.0: 4 ports detected |
| [ 2.050811] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 |
| [ 2.050815] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 2.051375] hub 2-1:1.0: USB hub found |
| [ 2.051532] hub 2-1:1.0: 8 ports detected |
| [ 2.100737] fbcon: i915drmfb (fb0) is primary device |
| [ 2.197151] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [ 2.231449] usb 4-3: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd |
| [ 2.234517] ata2.00: ATA-10: ST2000LM015-2E8174, SDM1, max UDMA/133 |
| [ 2.234520] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA |
| [ 2.254291] tsc: Refined TSC clocksource calibration: 2893.428 MHz |
| [ 2.254311] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29b502e9c9f, max_idle_ns: 440795289850 ns |
| [ 2.254341] clocksource: Switched to clocksource tsc |
| [ 2.266679] psmouse serio1: synaptics: queried max coordinates: x [..5470], y [..4498] |
| [ 2.284335] ata2.00: configured for UDMA/133 |
| [ 2.293953] scsi 1:0:0:0: Direct-Access ATA ST2000LM015-2E81 SDM1 PQ: 0 ANSI: 5 |
| [ 2.314250] usb 1-1.3: new full-speed USB device number 3 using ehci-pci |
| [ 2.327645] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b1/0xb40000/0xa0000/0x0, board id: 0, fw id: 920262 |
| [ 2.327653] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0 |
| [ 2.338255] usb 2-1.5: new high-speed USB device number 3 using ehci-pci |
| [ 2.366546] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5 |
| [ 2.375752] usb 4-3: New USB device found, idVendor=2109, idProduct=0813, bcdDevice= 2.21 |
| [ 2.375755] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 2.375758] usb 4-3: Product: USB3.0 Hub |
| [ 2.375760] usb 4-3: Manufacturer: VIA Labs, Inc. |
| [ 2.378438] hub 4-3:1.0: USB hub found |
| [ 2.378698] hub 4-3:1.0: 4 ports detected |
| [ 2.431837] usb 1-1.3: New USB device found, idVendor=147e, idProduct=2020, bcdDevice= 0.01 |
| [ 2.431841] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 2.431843] usb 1-1.3: Product: Biometric Coprocessor |
| [ 2.431845] usb 1-1.3: Manufacturer: Auth |
| [ 2.447345] usb 2-1.5: New USB device found, idVendor=17ef, idProduct=100a, bcdDevice= 0.00 |
| [ 2.447348] usb 2-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 2.448041] hub 2-1.5:1.0: USB hub found |
| [ 2.448229] hub 2-1.5:1.0: 6 ports detected |
| [ 2.514228] usb 1-1.4: new full-speed USB device number 4 using ehci-pci |
| [ 2.609449] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) |
| [ 2.609884] ata3.00: supports DRM functions and may not be fully accessible |
| [ 2.609995] ata3.00: ATA-11: KINGSTON SUV500MS240G, 003056RI, max UDMA/133 |
| [ 2.609998] ata3.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 32), AA |
| [ 2.610994] ata3.00: Trusted Computing capability qword not valid! |
| [ 2.611614] ata3.00: supports DRM functions and may not be fully accessible |
| [ 2.612617] ata3.00: Trusted Computing capability qword not valid! |
| [ 2.612624] ata3.00: configured for UDMA/133 |
| [ 2.613162] scsi 2:0:0:0: Direct-Access ATA KINGSTON SUV500M 56RI PQ: 0 ANSI: 5 |
| [ 2.626026] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=21e6, bcdDevice= 1.12 |
| [ 2.626029] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [ 2.626031] usb 1-1.4: Product: BCM20702A0 |
| [ 2.626033] usb 1-1.4: Manufacturer: Broadcom Corp |
| [ 2.626035] usb 1-1.4: SerialNumber: B8763FA9D32E |
| [ 2.706250] usb 1-1.6: new high-speed USB device number 5 using ehci-pci |
| [ 2.738259] usb 2-1.5.1: new full-speed USB device number 4 using ehci-pci |
| [ 2.822454] usb 1-1.6: New USB device found, idVendor=5986, idProduct=02d5, bcdDevice=10.11 |
| [ 2.822458] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 2.822460] usb 1-1.6: Product: Integrated Camera |
| [ 2.822462] usb 1-1.6: Manufacturer: Ricoh Company Ltd. |
| [ 2.851753] usb 2-1.5.1: New USB device found, idVendor=17ef, idProduct=604d, bcdDevice= 1.22 |
| [ 2.851756] usb 2-1.5.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0 |
| [ 2.851758] usb 2-1.5.1: Product: Lenovo USB Receiver |
| [ 2.863617] hidraw: raw HID events driver (C) Jiri Kosina |
| [ 2.872797] usbcore: registered new interface driver usbhid |
| [ 2.872798] usbhid: USB HID core driver |
| [ 2.875377] input: Lenovo USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5.1/2-1.5.1:1.0/0003:17EF:604D.0001/input/input8 |
| [ 2.926430] Console: switching to colour frame buffer device 240x67 |
| [ 2.929495] ata5: SATA link down (SStatus 0 SControl 300) |
| [ 2.930254] usb 2-1.5.3: new high-speed USB device number 5 using ehci-pci |
| [ 2.934636] hid-generic 0003:17EF:604D.0001: input,hidraw0: USB HID v1.11 Keyboard [Lenovo USB Receiver] on usb-0000:00:1d.0-1.5.1/input0 |
| [ 2.935010] input: Lenovo USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5.1/2-1.5.1:1.1/0003:17EF:604D.0002/input/input9 |
| [ 2.935169] hid-generic 0003:17EF:604D.0002: input,hidraw1: USB HID v1.11 Mouse [Lenovo USB Receiver] on usb-0000:00:1d.0-1.5.1/input1 |
| [ 2.935657] input: Lenovo USB Receiver Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5.1/2-1.5.1:1.2/0003:17EF:604D.0003/input/input10 |
| [ 2.983403] i915 0000:00:02.0: fb0: i915drmfb frame buffer device |
| [ 2.994389] input: Lenovo USB Receiver System Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5.1/2-1.5.1:1.2/0003:17EF:604D.0003/input/input11 |
| [ 2.998367] input: Lenovo USB Receiver Keypad as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5.1/2-1.5.1:1.2/0003:17EF:604D.0003/input/input12 |
| [ 3.002571] hid-generic 0003:17EF:604D.0003: input,hiddev0,hidraw2: USB HID v1.11 Keypad [Lenovo USB Receiver] on usb-0000:00:1d.0-1.5.1/input2 |
| [ 3.010566] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 |
| [ 3.021102] sd 0:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/477 GiB) |
| [ 3.021197] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) |
| [ 3.021873] sd 2:0:0:0: [sdc] 468862128 512-byte logical blocks: (240 GB/224 GiB) |
| [ 3.021875] sd 2:0:0:0: [sdc] 4096-byte physical blocks |
| [ 3.021885] sd 2:0:0:0: [sdc] Write Protect is off |
| [ 3.021886] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 |
| [ 3.021901] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 3.023526] sd 0:0:0:0: [sda] Write Protect is off |
| [ 3.023811] sdc: sdc1 sdc2 sdc3 |
| [ 3.024429] sd 2:0:0:0: [sdc] Attached SCSI disk |
| [ 3.025674] sd 1:0:0:0: [sdb] 4096-byte physical blocks |
| [ 3.027945] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 |
| [ 3.035143] sd 1:0:0:0: [sdb] Write Protect is off |
| [ 3.037345] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 3.039658] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 |
| [ 3.039684] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 3.042847] usb 2-1.5.3: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3 |
| [ 3.046132] sda: sda1 sda2 < sda5 > |
| [ 3.048015] usb 2-1.5.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 3.050202] sd 0:0:0:0: [sda] Attached SCSI disk |
| [ 3.053623] hub 2-1.5.3:1.0: USB hub found |
| [ 3.058818] sdb: sdb1 |
| [ 3.061093] hub 2-1.5.3:1.0: 4 ports detected |
| [ 3.062451] sd 1:0:0:0: [sdb] Attached SCSI disk |
| [ 3.142273] usb 2-1.5.6: new high-speed USB device number 6 using ehci-pci |
| [ 3.230053] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input7 |
| [ 3.258946] usb 2-1.5.6: New USB device found, idVendor=0409, idProduct=005a, bcdDevice= 1.00 |
| [ 3.260786] usb 2-1.5.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 3.263778] hub 2-1.5.6:1.0: USB hub found |
| [ 3.265914] hub 2-1.5.6:1.0: 4 ports detected |
| [ 3.402174] raid6: sse2x4 gen() 14701 MB/s |
| [ 3.470170] raid6: sse2x4 xor() 10041 MB/s |
| [ 3.494180] usb 2-1.5.2: new full-speed USB device number 7 using ehci-pci |
| [ 3.538174] raid6: sse2x2 gen() 11322 MB/s |
| [ 3.605210] usb 2-1.5.2: New USB device found, idVendor=04b4, idProduct=4042, bcdDevice= 1.03 |
| [ 3.606740] raid6: sse2x2 xor() 5670 MB/s |
| [ 3.608264] usb 2-1.5.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 3.613006] input: HID 04b4:4042 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5.2/2-1.5.2:1.0/0003:04B4:4042.0004/input/input13 |
| [ 3.674175] raid6: sse2x1 gen() 10375 MB/s |
| [ 3.674329] hid-generic 0003:04B4:4042.0004: input,hidraw3: USB HID v1.11 Keyboard [HID 04b4:4042] on usb-0000:00:1d.0-1.5.2/input0 |
| [ 3.681872] input: HID 04b4:4042 Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5.2/2-1.5.2:1.1/0003:04B4:4042.0005/input/input14 |
| [ 3.683525] usb 2-1.5.6.1: new high-speed USB device number 8 using ehci-pci |
| [ 3.685205] input: HID 04b4:4042 System Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5.2/2-1.5.2:1.1/0003:04B4:4042.0005/input/input15 |
| [ 3.742169] raid6: sse2x1 xor() 7246 MB/s |
| [ 3.743760] raid6: using algorithm sse2x4 gen() 14701 MB/s |
| [ 3.745341] raid6: .... xor() 10041 MB/s, rmw enabled |
| [ 3.746217] input: HID 04b4:4042 Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5.2/2-1.5.2:1.1/0003:04B4:4042.0005/input/input16 |
| [ 3.747180] raid6: using ssse3x2 recovery algorithm |
| [ 3.748898] input: HID 04b4:4042 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5.2/2-1.5.2:1.1/0003:04B4:4042.0005/input/input17 |
| [ 3.752557] input: HID 04b4:4042 Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5.2/2-1.5.2:1.1/0003:04B4:4042.0005/input/input18 |
| [ 3.754385] xor: automatically using best checksumming function avx |
| [ 3.754421] hid-generic 0003:04B4:4042.0005: input,hiddev1,hidraw4: USB HID v1.11 Mouse [HID 04b4:4042] on usb-0000:00:1d.0-1.5.2/input1 |
| [ 3.758792] async_tx: api initialized (async) |
| [ 3.794996] usb 2-1.5.6.1: New USB device found, idVendor=0409, idProduct=005a, bcdDevice= 1.00 |
| [ 3.798291] usb 2-1.5.6.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 3.802866] hub 2-1.5.6.1:1.0: USB hub found |
| [ 3.804959] hub 2-1.5.6.1:1.0: 4 ports detected |
| [ 3.972449] device-mapper: uevent: version 1.0.3 |
| [ 3.974371] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com |
| [ 4.094267] usb 2-1.5.6.1.2: new full-speed USB device number 9 using ehci-pci |
| [ 4.213513] usb 2-1.5.6.1.2: New USB device found, idVendor=067b, idProduct=2305, bcdDevice= 2.02 |
| [ 4.217625] usb 2-1.5.6.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 4.220539] usb 2-1.5.6.1.2: Product: IEEE-1284 Controller |
| [ 4.223428] usb 2-1.5.6.1.2: Manufacturer: Prolific Technology Inc. |
| [ 4.306264] usb 2-1.5.6.1.3: new full-speed USB device number 10 using ehci-pci |
| [ 4.420810] usb 2-1.5.6.1.3: New USB device found, idVendor=067b, idProduct=2303, bcdDevice= 4.00 |
| [ 4.424929] usb 2-1.5.6.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 4.428960] usb 2-1.5.6.1.3: Product: USB-Serial Controller D |
| [ 4.430607] usb 2-1.5.6.1.3: Manufacturer: Prolific Technology Inc. |
| [ 11.390927] PM: Image not found (code -22) |
| [ 11.395754] PM: Marking nosave pages: [mem 0x00000000-0x00000fff] |
| [ 11.395756] PM: Marking nosave pages: [mem 0x0009f000-0x000fffff] |
| [ 11.395759] PM: Marking nosave pages: [mem 0x7ff24000-0xffffffff] |
| [ 11.397736] PM: Basic memory bitmaps created |
| [ 11.398521] PM: Basic memory bitmaps freed |
| [ 11.399173] video LNXVIDEO:00: Restoring backlight state |
| [ 11.515283] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) |
| [ 11.578120] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. |
| [ 11.746460] systemd[1]: Inserted module 'autofs4' |
| [ 11.773456] systemd[1]: systemd 242 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) |
| [ 11.798421] systemd[1]: Detected architecture x86-64. |
| [ 11.809999] systemd[1]: Set hostname to <TP-T430s>. |
| [ 11.810793] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument |
| [ 11.918144] systemd[1]: /lib/systemd/system/dbus.socket:4: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly. |
| [ 11.952456] systemd[1]: /lib/systemd/system/thinkfan.service:8: PIDFile= references a path below legacy directory /var/run/, updating /var/run/thinkfan.pid → /run/thinkfan.pid; please update the unit file accordingly. |
| [ 11.954903] systemd[1]: /etc/systemd/system/teamviewerd.service:8: PIDFile= references a path below legacy directory /var/run/, updating /var/run/teamviewerd.pid → /run/teamviewerd.pid; please update the unit file accordingly. |
| [ 11.968341] systemd[1]: /lib/systemd/system/fancontrol.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/fancontrol.pid → /run/fancontrol.pid; please update the unit file accordingly. |
| [ 11.971367] systemd[1]: /lib/systemd/system/docker.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/docker.sock → /run/docker.sock; please update the unit file accordingly. |
| [ 11.977873] systemd[1]: /etc/systemd/system/anydesk.service:8: PIDFile= references a path below legacy directory /var/run/, updating /var/run/anydesk.pid → /run/anydesk.pid; please update the unit file accordingly. |
| [ 12.046318] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro |
| [ 12.104084] loop: module loaded |
| [ 12.127997] lp: driver loaded but no devices found |
| [ 12.136699] ppdev: user-space parallel port driver |
| [ 12.423779] ACPI: AC Adapter [AC] (on-line) |
| [ 12.433735] battery: ACPI: Battery Slot [BAT0] (battery present) |
| [ 12.435548] battery: ACPI: Battery Slot [BAT1] (battery absent) |
| [ 12.503262] Non-volatile memory driver v1.3 |
| [ 12.505082] systemd-journald[493]: Received request to flush runtime journal from PID 1 |
| [ 12.519827] thinkpad_acpi: ThinkPad ACPI Extras v0.26 |
| [ 12.519828] thinkpad_acpi: http://ibm-acpi.sf.net/ |
| [ 12.519829] thinkpad_acpi: ThinkPad BIOS CBET4000 4.10-1056-g40377c7250, EC G7HT39WW-3.22 |
| [ 12.519829] thinkpad_acpi: Lenovo ThinkPad T430s, model 23532NU |
| [ 12.526668] thinkpad_acpi: radio switch found; radios are enabled |
| [ 12.526811] thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode |
| [ 12.526821] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver |
| [ 12.526822] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... |
| [ 12.528547] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked |
| [ 12.538311] tpm_tis 00:06: 1.2 TPM (device-id 0x0, rev-id 78) |
| [ 12.549733] thinkpad_acpi: rfkill switch tpacpi_wwan_sw: radio is unblocked |
| [ 12.566211] sd 0:0:0:0: Attached scsi generic sg0 type 0 |
| [ 12.567903] iTCO_vendor_support: vendor-support=0 |
| [ 12.569196] sd 1:0:0:0: Attached scsi generic sg1 type 0 |
| [ 12.571883] sd 2:0:0:0: Attached scsi generic sg2 type 0 |
| [ 12.575616] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 |
| [ 12.577914] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560) |
| [ 12.584035] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) |
| [ 12.586669] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one |
| [ 12.590493] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) |
| [ 12.593728] thinkpad_acpi: Console audio control enabled, mode: monitor (read only) |
| [ 12.597643] thinkpad_acpi: battery 1 registered (start 0, stop 100) |
| [ 12.597648] battery: new extension: ThinkPad Battery Extension |
| [ 12.602377] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input19 |
| [ 12.635630] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker |
| [ 12.637289] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) |
| [ 12.638937] snd_hda_codec_realtek hdaudioC0D0: hp_outs=2 (0x15/0x1b/0x0/0x0/0x0) |
| [ 12.640577] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 |
| [ 12.642515] snd_hda_codec_realtek hdaudioC0D0: inputs: |
| [ 12.644256] input: PC Speaker as /devices/platform/pcspkr/input/input20 |
| [ 12.644738] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18 |
| [ 12.647621] snd_hda_codec_realtek hdaudioC0D0: Dock Mic=0x19 |
| [ 12.649347] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12 |
| [ 12.678744] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21 |
| [ 12.680533] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input22 |
| [ 12.682308] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input23 |
| [ 12.684130] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input24 |
| [ 12.685957] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input25 |
| [ 12.687779] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer |
| [ 12.687819] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input26 |
| [ 12.689440] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules |
| [ 12.691184] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input27 |
| [ 12.693240] RAPL PMU: hw unit of domain package 2^-16 Joules |
| [ 12.693241] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules |
| [ 12.700617] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input28 |
| [ 12.748174] wl: loading out-of-tree module taints kernel. |
| [ 12.750460] wl: module license 'MIXED/Proprietary' taints kernel. |
| [ 12.752310] Disabling lock debugging due to kernel taint |
| [ 12.758312] wl: module verification failed: signature and/or required key missing - tainting kernel |
| [ 12.781193] wlan0: Broadcom BCM43a0 802.11 Hybrid Wireless Controller 6.30.223.271 (r587334) |
| |
| [ 12.867784] intel_rapl: Found RAPL domain package |
| [ 12.869648] intel_rapl: Found RAPL domain core |
| [ 12.871429] intel_rapl: Found RAPL domain uncore |
| [ 13.034793] wl 0000:01:00.0 wlp1s0: renamed from wlan0 |
| [ 13.042206] Adding 16699388k swap on /dev/mapper/TP--T430s--vg-swap_1. Priority:-2 extents:1 across:16699388k SSFS |
| [ 13.318560] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem |
| [ 13.322531] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null) |
| [ 13.510902] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) |
| [ 13.577049] audit: type=1400 audit(1571521775.756:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1263 comm="apparmor_parser" |
| [ 13.577053] audit: type=1400 audit(1571521775.756:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1263 comm="apparmor_parser" |
| [ 13.577055] audit: type=1400 audit(1571521775.756:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1263 comm="apparmor_parser" |
| [ 13.578696] audit: type=1400 audit(1571521775.760:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="system_tor" pid=1265 comm="apparmor_parser" |
| [ 13.579058] audit: type=1400 audit(1571521775.760:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=1262 comm="apparmor_parser" |
| [ 13.587321] audit: type=1400 audit(1571521775.760:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/mysqld" pid=1264 comm="apparmor_parser" |
| [ 13.587324] audit: type=1400 audit(1571521775.764:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/haveged" pid=1270 comm="apparmor_parser" |
| [ 13.587325] audit: type=1400 audit(1571521775.764:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/freshclam" pid=1268 comm="apparmor_parser" |
| [ 13.589997] audit: type=1400 audit(1571521775.768:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ioquake3" pid=1267 comm="apparmor_parser" |
| [ 13.590000] audit: type=1400 audit(1571521775.768:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ioquake3//popup" pid=1267 comm="apparmor_parser" |
| [ 13.758274] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input29 |
| [ 13.826123] Process accounting resumed |
| [ 14.500493] aufs 5.2.5+-20190909 |
| [ 14.756148] vboxdrv: Found 4 processor cores |
| [ 14.778418] vboxdrv: TSC mode is Invariant, tentative frequency 2893428759 Hz |
| [ 14.779710] vboxdrv: Successfully loaded version 6.0.11 (interface 0x00290008) |
| [ 14.992832] VBoxNetFlt: Successfully started. |
| [ 15.009998] VBoxNetAdp: Successfully started. |
| [ 15.019655] VBoxPciLinuxInit |
| [ 15.034073] vboxpci: IOMMU found |
| [ 15.256337] media: Linux media interface: v0.10 |
| [ 15.274839] videodev: Linux video capture interface: v2.00 |
| [ 15.323372] alg: No test for fips(ansi_cprng) (fips_ansi_cprng) |
| [ 15.407706] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:02d5) |
| [ 15.411410] Bluetooth: Core ver 2.22 |
| [ 15.412765] NET: Registered protocol family 31 |
| [ 15.414053] Bluetooth: HCI device and connection manager initialized |
| [ 15.415790] Bluetooth: HCI socket layer initialized |
| [ 15.417097] Bluetooth: L2CAP socket layer initialized |
| [ 15.418528] Bluetooth: SCO socket layer initialized |
| [ 15.424434] uvcvideo 1-1.6:1.0: Entity type for entity Extension 4 was not initialized! |
| [ 15.425964] uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized! |
| [ 15.427404] uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized! |
| [ 15.428663] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized! |
| [ 15.430025] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input30 |
| [ 15.432979] usbcore: registered new interface driver uvcvideo |
| [ 15.434286] USB Video Class driver (1.1.1) |
| [ 15.443948] usbcore: registered new interface driver btusb |
| [ 15.529051] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 |
| [ 15.529053] Bluetooth: BNEP filters: protocol multicast |
| [ 15.529058] Bluetooth: BNEP socket layer initialized |
| [ 15.556157] Bluetooth: hci0: BCM: chip id 63 |
| [ 15.557156] Bluetooth: hci0: BCM: features 0x07 |
| [ 15.573160] Bluetooth: hci0: TP-T430s |
| [ 15.574214] Bluetooth: hci0: BCM20702A1 (001.002.014) build 1669 |
| [ 15.576374] bluetooth hci0: firmware: direct-loading firmware brcm/BCM20702A1-0a5c-21e6.hcd |
| [ 16.448244] Bluetooth: hci0: BCM20702A1 (001.002.014) build 1669 |
| [ 16.464169] Bluetooth: hci0: Broadcom Bluetooth Device |
| [ 16.533235] Bluetooth: RFCOMM TTY layer initialized |
| [ 16.533241] Bluetooth: RFCOMM socket layer initialized |
| [ 16.533247] Bluetooth: RFCOMM ver 1.11 |
| [ 17.053466] usbcore: registered new interface driver usbserial_generic |
| [ 17.053477] usbserial: USB Serial support registered for generic |
| [ 17.057017] usbcore: registered new interface driver pl2303 |
| [ 17.057026] usbserial: USB Serial support registered for pl2303 |
| [ 17.057053] pl2303 2-1.5.6.1.3:1.0: pl2303 converter detected |
| [ 17.061592] usb 2-1.5.6.1.3: pl2303 converter now attached to ttyUSB0 |
| [ 17.081484] usblp 2-1.5.6.1.2:1.0: usblp2: USB Bidirectional printer dev 9 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 |
| [ 17.081518] usbcore: registered new interface driver usblp |
| [ 17.712181] e1000e: eno0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None |
| [ 17.712237] IPv6: ADDRCONF(NETDEV_CHANGE): eno0: link becomes ready |
| [ 19.040830] rfkill: input handler disabled |
| [ 21.416214] e1000e: eno0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None |
| [ 22.046202] kauditd_printk_skb: 26 callbacks suppressed |
| [ 22.046203] audit: type=1400 audit(1571521784.228:38): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=2981 comm="apparmor_parser" |
| [ 22.175065] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. |
| [ 22.176886] Bridge firewalling registered |
| [ 22.445534] Initializing XFRM netlink socket |
| [ 26.131678] rfkill: input handler enabled |
| [ 27.190478] fuse: init (API version 7.31) |
| [ 29.794658] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. |
| [ 30.060601] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready |
| [ 30.419581] rfkill: input handler disabled |