| [ 0.000000] Linux version 4.17.3-1-ARCH (builduser@heftig-6515) (gcc version 8.1.1 20180531 (GCC)) #1 SMP PREEMPT Tue Jun 26 04:42:36 UTC 2018 |
| [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/sda4 rw iomem=relaxed intel_iommu=on i915.fastboot=on |
| [ 0.000000] KERNEL supported cpus: |
| [ 0.000000] Intel GenuineIntel |
| [ 0.000000] AMD AuthenticAMD |
| [ 0.000000] Centaur CentaurHauls |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' |
| [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 |
| [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. |
| [ 0.000000] e820: BIOS-provided physical RAM map: |
| [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ff22fff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000007ff23000-0x000000008e9fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000026f5fffff] usable |
| [ 0.000000] NX (Execute Disable) protection: active |
| [ 0.000000] SMBIOS 2.7 present. |
| [ 0.000000] DMI: LENOVO 2347B85/2347B85, BIOS CBET4000 4.8-704-gd837e66007 07/03/2018 |
| [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable |
| [ 0.000000] e820: last_pfn = 0x26f600 max_arch_pfn = 0x400000000 |
| [ 0.000000] MTRR default type: uncachable |
| [ 0.000000] MTRR fixed ranges enabled: |
| [ 0.000000] 00000-9FFFF write-back |
| [ 0.000000] A0000-BFFFF uncachable |
| [ 0.000000] C0000-FFFFF write-back |
| [ 0.000000] MTRR variable ranges enabled: |
| [ 0.000000] 0 base 000000000 mask F80000000 write-back |
| [ 0.000000] 1 base 0D0000000 mask FF0000000 write-combining |
| [ 0.000000] 2 base 100000000 mask F00000000 write-back |
| [ 0.000000] 3 base 200000000 mask F80000000 write-back |
| [ 0.000000] 4 disabled |
| [ 0.000000] 5 disabled |
| [ 0.000000] 6 disabled |
| [ 0.000000] 7 disabled |
| [ 0.000000] 8 disabled |
| [ 0.000000] 9 disabled |
| [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT |
| [ 0.000000] e820: last_pfn = 0x7ff23 max_arch_pfn = 0x400000000 |
| [ 0.000000] Scanning 1 areas for low memory corruption |
| [ 0.000000] Base memory trampoline at [ (ptrval)] 99000 size 24576 |
| [ 0.000000] BRK [0x26e660000, 0x26e660fff] PGTABLE |
| [ 0.000000] BRK [0x26e661000, 0x26e661fff] PGTABLE |
| [ 0.000000] BRK [0x26e662000, 0x26e662fff] PGTABLE |
| [ 0.000000] BRK [0x26e663000, 0x26e663fff] PGTABLE |
| [ 0.000000] BRK [0x26e664000, 0x26e664fff] PGTABLE |
| [ 0.000000] BRK [0x26e665000, 0x26e665fff] PGTABLE |
| [ 0.000000] BRK [0x26e666000, 0x26e666fff] PGTABLE |
| [ 0.000000] BRK [0x26e667000, 0x26e667fff] PGTABLE |
| [ 0.000000] BRK [0x26e668000, 0x26e668fff] PGTABLE |
| [ 0.000000] BRK [0x26e669000, 0x26e669fff] PGTABLE |
| [ 0.000000] BRK [0x26e66a000, 0x26e66afff] PGTABLE |
| [ 0.000000] BRK [0x26e66b000, 0x26e66bfff] PGTABLE |
| [ 0.000000] RAMDISK: [mem 0x36a59000-0x37523fff] |
| [ 0.000000] ACPI: Early table checksum verification disabled |
| [ 0.000000] ACPI: RSDP 0x00000000000F66B0 000024 (v02 CORE ) |
| [ 0.000000] ACPI: XSDT 0x000000007FF490E0 00005C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: FACP 0x000000007FF4C7B0 0000F4 (v04 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: DSDT 0x000000007FF49280 00352E (v03 COREv4 COREBOOT 20141018 INTL 20161222) |
| [ 0.000000] ACPI: FACS 0x000000007FF49240 000040 |
| [ 0.000000] ACPI: FACS 0x000000007FF49240 000040 |
| [ 0.000000] ACPI: SSDT 0x000000007FF4C8B0 002F32 (v02 CORE COREBOOT 0000002A CORE 0000002A) |
| [ 0.000000] ACPI: MCFG 0x000000007FF4F7F0 00003C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: TCPA 0x000000007FF4F830 000032 (v02 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: APIC 0x000000007FF4F870 00008C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: DMAR 0x000000007FF4F900 0000A8 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: HPET 0x000000007FF4F9B0 000038 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] No NUMA configuration found |
| [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000026f5fffff] |
| [ 0.000000] NODE_DATA(0) allocated [mem 0x26f5fc000-0x26f5fffff] |
| [ 0.000000] tsc: Fast TSC calibration using PIT |
| [ 0.000000] Zone ranges: |
| [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] |
| [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] |
| [ 0.000000] Normal [mem 0x0000000100000000-0x000000026f5fffff] |
| [ 0.000000] Device empty |
| [ 0.000000] Movable zone start for each node |
| [ 0.000000] Early memory node ranges |
| [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] |
| [ 0.000000] node 0: [mem 0x0000000000100000-0x000000007ff22fff] |
| [ 0.000000] node 0: [mem 0x0000000100000000-0x000000026f5fffff] |
| [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000026f5fffff] |
| [ 0.000000] On node 0 totalpages: 2028737 |
| [ 0.000000] DMA zone: 64 pages used for memmap |
| [ 0.000000] DMA zone: 21 pages reserved |
| [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 |
| [ 0.000000] DMA32 zone: 8125 pages used for memmap |
| [ 0.000000] DMA32 zone: 519971 pages, LIFO batch:31 |
| [ 0.000000] Normal zone: 23512 pages used for memmap |
| [ 0.000000] Normal zone: 1504768 pages, LIFO batch:31 |
| [ 0.000000] Reserved but unavailable: 98 pages |
| [ 0.000000] Reserving Intel graphics memory at [mem 0x80a00000-0x8e9fffff] |
| [ 0.000000] ACPI: PM-Timer IO Port: 0x508 |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) |
| [ 0.000000] ACPI: IRQ0 used by override. |
| [ 0.000000] ACPI: IRQ9 used by override. |
| [ 0.000000] Using ACPI (MADT) for SMP configuration information |
| [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 |
| [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs |
| [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x7ff23000-0x8e9fffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x8ea00000-0xefffffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xfed3ffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed8ffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfed91fff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xfed92000-0xffffffff] |
| [ 0.000000] e820: [mem 0x8ea00000-0xefffffff] available for PCI devices |
| [ 0.000000] Booting paravirtualized kernel on bare hardware |
| [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns |
| [ 0.000000] random: get_random_bytes called from start_kernel+0x95/0x535 with crng_init=0 |
| [ 0.000000] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:8 nr_node_ids:1 |
| [ 0.000000] percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u262144 |
| [ 0.000000] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152 |
| [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 |
| [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1997015 |
| [ 0.000000] Policy zone: Normal |
| [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/sda4 rw iomem=relaxed intel_iommu=on i915.fastboot=on |
| [ 0.000000] DMAR: IOMMU enabled |
| [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area |
| [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! |
| [ 0.000000] Memory: 7886384K/8114948K available (10252K kernel code, 1290K rwdata, 3488K rodata, 1476K init, 608K bss, 228564K reserved, 0K cma-reserved) |
| [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 |
| [ 0.000000] Kernel/User page tables isolation: enabled |
| [ 0.000000] ftrace: allocating 32649 entries in 128 pages |
| [ 0.000000] Preemptible hierarchical RCU implementation. |
| [ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32 |
| [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. |
| [ 0.000000] RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8. |
| [ 0.000000] RCU priority boosting: priority 1 delay 500 ms. |
| [ 0.000000] Tasks RCU enabled. |
| [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 |
| [ 0.000000] NR_IRQS: 20736, nr_irqs: 488, preallocated irqs: 16 |
| [ 0.000000] Offload RCU callbacks from CPUs: (none). |
| [ 0.000000] Console: colour dummy device 80x25 |
| [ 0.000000] console [tty0] enabled |
| [ 0.000000] ACPI: Core revision 20180313 |
| [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns |
| [ 0.000000] hpet clockevent registered |
| [ 0.000000] APIC: Switch to symmetric I/O mode setup |
| [ 0.000000] DMAR: Host address width 36 |
| [ 0.000000] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 |
| [ 0.000000] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a |
| [ 0.000000] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 |
| [ 0.000000] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a |
| [ 0.000000] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 |
| [ 0.000000] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 |
| [ 0.000000] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. |
| [ 0.000000] DMAR-IR: Enabled IRQ remapping in x2apic mode |
| [ 0.000000] x2apic enabled |
| [ 0.000000] Switched APIC routing to cluster x2apic. |
| [ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 |
| [ 0.016666] tsc: Fast TSC calibration using PIT |
| [ 0.019999] tsc: Detected 2693.795 MHz processor |
| [ 0.019999] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x26d458cc458, max_idle_ns: 440795298126 ns |
| [ 0.019999] Calibrating delay loop (skipped), value calculated using timer frequency.. 5389.07 BogoMIPS (lpj=8979316) |
| [ 0.019999] pid_max: default: 32768 minimum: 301 |
| [ 0.019999] Security Framework initialized |
| [ 0.019999] Yama: becoming mindful. |
| [ 0.024522] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) |
| [ 0.025183] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) |
| [ 0.025213] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) |
| [ 0.025236] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) |
| [ 0.025441] CPU: Physical Processor ID: 0 |
| [ 0.025442] CPU: Processor Core ID: 0 |
| [ 0.025450] mce: CPU supports 9 MCE banks |
| [ 0.025467] CPU0: Thermal monitoring enabled (TM1) |
| [ 0.025476] process: using mwait in idle threads |
| [ 0.025479] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 |
| [ 0.025479] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 |
| [ 0.025481] Spectre V2 : Mitigation: Full generic retpoline |
| [ 0.025482] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier |
| [ 0.025482] Spectre V2 : Enabling Restricted Speculation for firmware calls |
| [ 0.025482] Speculative Store Bypass: Vulnerable |
| [ 0.025571] Freeing SMP alternatives memory: 28K |
| [ 0.026183] TSC deadline timer enabled |
| [ 0.026186] smpboot: CPU0: Intel(R) Core(TM) i7-3740QM CPU @ 2.70GHz (family: 0x6, model: 0x3a, stepping: 0x9) |
| [ 0.033375] mce: [Hardware Error]: Machine check events logged |
| [ 0.033379] mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 7: ee2000000003110a |
| [ 0.033390] mce: [Hardware Error]: TSC 0 ADDR feffff40 MISC 1040000086 |
| [ 0.033411] mce: [Hardware Error]: PROCESSOR 0:306a9 TIME 1530651999 SOCKET 0 APIC 0 microcode 1f |
| [ 0.033414] mce: [Hardware Error]: Machine check events logged |
| [ 0.033415] mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 8: ee2000000003110a |
| [ 0.033418] mce: [Hardware Error]: TSC 0 ADDR feffff00 MISC 1040000086 |
| [ 0.033422] mce: [Hardware Error]: PROCESSOR 0:306a9 TIME 1530651999 SOCKET 0 APIC 0 microcode 1f |
| [ 0.040014] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. |
| [ 0.040058] ... version: 3 |
| [ 0.040059] ... bit width: 48 |
| [ 0.040060] ... generic registers: 4 |
| [ 0.040061] ... value mask: 0000ffffffffffff |
| [ 0.040076] ... max period: 00007fffffffffff |
| [ 0.040076] ... fixed-purpose events: 3 |
| [ 0.040077] ... event mask: 000000070000000f |
| [ 0.043346] Hierarchical SRCU implementation. |
| [ 0.053570] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. |
| [ 0.056686] smp: Bringing up secondary CPUs ... |
| [ 0.080028] x86: Booting SMP configuration: |
| [ 0.080030] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 |
| [ 0.226348] smp: Brought up 1 node, 8 CPUs |
| [ 0.226348] smpboot: Max logical packages: 1 |
| [ 0.226348] smpboot: Total of 8 processors activated (43117.58 BogoMIPS) |
| [ 0.227017] devtmpfs: initialized |
| [ 0.227017] x86/mm: Memory block size: 128MB |
| [ 0.227319] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns |
| [ 0.227319] futex hash table entries: 2048 (order: 5, 131072 bytes) |
| [ 0.227319] pinctrl core: initialized pinctrl subsystem |
| [ 0.227319] RTC time: 21:06:39, date: 07/03/18 |
| [ 0.227319] NET: Registered protocol family 16 |
| [ 0.227319] cpuidle: using governor ladder |
| [ 0.230015] cpuidle: using governor menu |
| [ 0.230081] ACPI: bus type PCI registered |
| [ 0.230082] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 |
| [ 0.230138] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) |
| [ 0.230140] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 |
| [ 0.230148] PCI: Using configuration type 1 for base access |
| [ 0.230175] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on |
| [ 0.230937] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages |
| [ 0.230937] ACPI: Added _OSI(Module Device) |
| [ 0.230937] ACPI: Added _OSI(Processor Device) |
| [ 0.230937] ACPI: Added _OSI(3.0 _SCP Extensions) |
| [ 0.230937] ACPI: Added _OSI(Processor Aggregator Device) |
| [ 0.230937] ACPI: Added _OSI(Linux-Dell-Video) |
| [ 0.235861] ACPI: 2 ACPI AML tables successfully acquired and loaded |
| [ 0.237888] ACPI: EC: EC started |
| [ 0.237889] ACPI: EC: interrupt blocked |
| [ 0.237960] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC |
| [ 0.237962] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62 |
| [ 0.237964] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions |
| [ 0.237964] ACPI: Interpreter enabled |
| [ 0.237981] ACPI: (supports S0 S3 S4 S5) |
| [ 0.237982] ACPI: Using IOAPIC for interrupt routing |
| [ 0.238003] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| [ 0.238148] ACPI: Enabled 1 GPEs in block 00 to 3F |
| [ 0.242523] ACPI: Power Resource [FPWR] (off) |
| [ 0.242935] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) |
| [ 0.242941] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] |
| [ 0.243006] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] |
| [ 0.243017] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge |
| [ 0.243286] PCI host bridge to bus 0000:00 |
| [ 0.243288] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] |
| [ 0.243290] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] |
| [ 0.243291] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] |
| [ 0.243292] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] |
| [ 0.243294] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] |
| [ 0.243295] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] |
| [ 0.243296] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window] |
| [ 0.243297] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] |
| [ 0.243298] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] |
| [ 0.243300] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] |
| [ 0.243301] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] |
| [ 0.243302] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] |
| [ 0.243303] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] |
| [ 0.243305] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window] |
| [ 0.243306] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window] |
| [ 0.243307] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window] |
| [ 0.243308] pci_bus 0000:00: root bus resource [mem 0x8ea00001-0xefffffff window] |
| [ 0.243310] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] |
| [ 0.243311] pci_bus 0000:00: root bus resource [bus 00-ff] |
| [ 0.243319] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000 |
| [ 0.243437] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000 |
| [ 0.243449] pci 0000:00:02.0: reg 0x10: [mem 0xe1000000-0xe13fffff 64bit] |
| [ 0.243455] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref] |
| [ 0.243459] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f] |
| [ 0.243563] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330 |
| [ 0.243588] pci 0000:00:14.0: reg 0x10: [mem 0xe1620000-0xe162ffff 64bit] |
| [ 0.243657] pci 0000:00:14.0: PME# supported from D3hot D3cold |
| [ 0.243743] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000 |
| [ 0.243762] pci 0000:00:19.0: reg 0x10: [mem 0xe1600000-0xe161ffff] |
| [ 0.243771] pci 0000:00:19.0: reg 0x14: [mem 0xe1634000-0xe1634fff] |
| [ 0.243779] pci 0000:00:19.0: reg 0x18: [io 0x3040-0x305f] |
| [ 0.243840] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold |
| [ 0.243916] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 |
| [ 0.243939] pci 0000:00:1a.0: reg 0x10: [mem 0xe1636000-0xe16363ff] |
| [ 0.244021] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold |
| [ 0.244107] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300 |
| [ 0.244130] pci 0000:00:1b.0: reg 0x10: [mem 0xe1630000-0xe1633fff 64bit] |
| [ 0.244203] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold |
| [ 0.244293] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400 |
| [ 0.244430] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold |
| [ 0.244459] pci 0000:00:1c.0: Enabling MPC IRBNCE |
| [ 0.244462] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled |
| [ 0.244554] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400 |
| [ 0.244692] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold |
| [ 0.244717] pci 0000:00:1c.1: Enabling MPC IRBNCE |
| [ 0.244720] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled |
| [ 0.244813] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400 |
| [ 0.244954] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold |
| [ 0.244979] pci 0000:00:1c.2: Enabling MPC IRBNCE |
| [ 0.244981] pci 0000:00:1c.2: Intel PCH root port ACS workaround enabled |
| [ 0.245074] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 |
| [ 0.245097] pci 0000:00:1d.0: reg 0x10: [mem 0xe1637000-0xe16373ff] |
| [ 0.245180] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold |
| [ 0.245265] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100 |
| [ 0.245445] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601 |
| [ 0.245465] pci 0000:00:1f.2: reg 0x10: [io 0x3080-0x3087] |
| [ 0.245473] pci 0000:00:1f.2: reg 0x14: [io 0x3090-0x3093] |
| [ 0.245481] pci 0000:00:1f.2: reg 0x18: [io 0x3088-0x308f] |
| [ 0.245490] pci 0000:00:1f.2: reg 0x1c: [io 0x3094-0x3097] |
| [ 0.245498] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f] |
| [ 0.245506] pci 0000:00:1f.2: reg 0x24: [mem 0xe1635000-0xe16357ff] |
| [ 0.245550] pci 0000:00:1f.2: PME# supported from D3hot |
| [ 0.245628] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500 |
| [ 0.245648] pci 0000:00:1f.3: reg 0x10: [mem 0xe1638000-0xe16380ff 64bit] |
| [ 0.245668] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f] |
| [ 0.245851] pci 0000:01:00.0: [1180:e822] type 00 class 0x080501 |
| [ 0.245899] pci 0000:01:00.0: MMC controller base frequency changed to 50Mhz. |
| [ 0.245953] pci 0000:01:00.0: reg 0x10: [mem 0xe1400000-0xe14000ff] |
| [ 0.246268] pci 0000:01:00.0: supports D1 D2 |
| [ 0.246269] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.246461] pci 0000:00:1c.0: PCI bridge to [bus 01] |
| [ 0.246467] pci 0000:00:1c.0: bridge window [mem 0xe1400000-0xe14fffff] |
| [ 0.246557] pci 0000:02:00.0: [168c:002b] type 00 class 0x028000 |
| [ 0.246615] pci 0000:02:00.0: reg 0x10: [mem 0xe1500000-0xe150ffff 64bit] |
| [ 0.246828] pci 0000:02:00.0: supports D1 |
| [ 0.246829] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold |
| [ 0.246990] pci 0000:00:1c.1: PCI bridge to [bus 02] |
| [ 0.246996] pci 0000:00:1c.1: bridge window [mem 0xe1500000-0xe15fffff] |
| [ 0.247064] pci 0000:00:1c.2: PCI bridge to [bus 03] |
| [ 0.247069] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff] |
| [ 0.247074] pci 0000:00:1c.2: bridge window [mem 0xe0800000-0xe0ffffff] |
| [ 0.247081] pci 0000:00:1c.2: bridge window [mem 0xe0000000-0xe07fffff 64bit pref] |
| [ 0.247292] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.247358] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.247422] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.247486] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.247549] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.247612] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.247676] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.247739] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.248440] ACPI: EC: interrupt unblocked |
| [ 0.248458] ACPI: EC: event unblocked |
| [ 0.248464] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62 |
| [ 0.248466] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events |
| [ 0.248527] pci 0000:00:02.0: vgaarb: setting as boot VGA device |
| [ 0.248527] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none |
| [ 0.248527] pci 0000:00:02.0: vgaarb: bridge control possible |
| [ 0.248527] vgaarb: loaded |
| [ 0.248527] pps_core: LinuxPPS API ver. 1 registered |
| [ 0.248527] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> |
| [ 0.248527] PTP clock support registered |
| [ 0.248527] EDAC MC: Ver: 3.0.0 |
| [ 0.248527] PCI: Using ACPI for IRQ routing |
| [ 0.250361] PCI: pci_cache_line_size set to 64 bytes |
| [ 0.250430] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] |
| [ 0.250431] e820: reserve RAM buffer [mem 0x7ff23000-0x7fffffff] |
| [ 0.250432] e820: reserve RAM buffer [mem 0x26f600000-0x26fffffff] |
| [ 0.250515] NetLabel: Initializing |
| [ 0.250515] NetLabel: domain hash size = 128 |
| [ 0.250516] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO |
| [ 0.250530] NetLabel: unlabeled traffic allowed by default |
| [ 0.250534] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 |
| [ 0.250534] hpet0: 8 comparators, 64-bit 14.318180 MHz counter |
| [ 0.252397] clocksource: Switched to clocksource tsc-early |
| [ 0.260647] VFS: Disk quotas dquot_6.6.0 |
| [ 0.260663] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) |
| [ 0.260727] pnp: PnP ACPI init |
| [ 0.260905] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved |
| [ 0.260906] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved |
| [ 0.260908] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved |
| [ 0.260909] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved |
| [ 0.260911] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved |
| [ 0.260912] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved |
| [ 0.260914] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved |
| [ 0.260915] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved |
| [ 0.260917] system 00:00: [mem 0x20000000-0x201fffff] could not be reserved |
| [ 0.260918] system 00:00: [mem 0x40000000-0x401fffff] could not be reserved |
| [ 0.260923] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) |
| [ 0.261421] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved |
| [ 0.261425] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) |
| [ 0.261461] system 00:02: [io 0x0500-0x057f] has been reserved |
| [ 0.261462] system 00:02: [io 0x0480-0x04bf] has been reserved |
| [ 0.261466] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) |
| [ 0.261484] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) |
| [ 0.261516] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) |
| [ 0.261543] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active) |
| [ 0.261568] pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active) |
| [ 0.261592] pnp: PnP ACPI: found 7 devices |
| [ 0.267446] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns |
| [ 0.267488] pci 0000:00:1c.0: PCI bridge to [bus 01] |
| [ 0.267495] pci 0000:00:1c.0: bridge window [mem 0xe1400000-0xe14fffff] |
| [ 0.267507] pci 0000:00:1c.1: PCI bridge to [bus 02] |
| [ 0.267513] pci 0000:00:1c.1: bridge window [mem 0xe1500000-0xe15fffff] |
| [ 0.267525] pci 0000:00:1c.2: PCI bridge to [bus 03] |
| [ 0.267528] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff] |
| [ 0.267535] pci 0000:00:1c.2: bridge window [mem 0xe0800000-0xe0ffffff] |
| [ 0.267539] pci 0000:00:1c.2: bridge window [mem 0xe0000000-0xe07fffff 64bit pref] |
| [ 0.267548] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] |
| [ 0.267549] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] |
| [ 0.267551] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] |
| [ 0.267552] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] |
| [ 0.267553] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window] |
| [ 0.267555] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window] |
| [ 0.267556] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window] |
| [ 0.267557] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window] |
| [ 0.267559] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window] |
| [ 0.267560] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window] |
| [ 0.267561] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window] |
| [ 0.267563] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window] |
| [ 0.267564] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window] |
| [ 0.267565] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window] |
| [ 0.267566] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window] |
| [ 0.267568] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window] |
| [ 0.267569] pci_bus 0000:00: resource 20 [mem 0x8ea00001-0xefffffff window] |
| [ 0.267570] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff window] |
| [ 0.267572] pci_bus 0000:01: resource 1 [mem 0xe1400000-0xe14fffff] |
| [ 0.267573] pci_bus 0000:02: resource 1 [mem 0xe1500000-0xe15fffff] |
| [ 0.267575] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff] |
| [ 0.267576] pci_bus 0000:03: resource 1 [mem 0xe0800000-0xe0ffffff] |
| [ 0.267577] pci_bus 0000:03: resource 2 [mem 0xe0000000-0xe07fffff 64bit pref] |
| [ 0.267660] NET: Registered protocol family 2 |
| [ 0.267780] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes) |
| [ 0.267807] TCP established hash table entries: 65536 (order: 7, 524288 bytes) |
| [ 0.267919] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) |
| [ 0.268049] TCP: Hash tables configured (established 65536 bind 65536) |
| [ 0.268081] UDP hash table entries: 4096 (order: 5, 131072 bytes) |
| [ 0.268103] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) |
| [ 0.268150] NET: Registered protocol family 1 |
| [ 0.268162] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] |
| [ 0.268915] PCI: CLS 64 bytes, default 64 |
| [ 0.268948] Unpacking initramfs... |
| [ 0.403256] Freeing initrd memory: 11052K |
| [ 0.403290] DMAR: No RMRR found |
| [ 0.403291] DMAR: No ATSR found |
| [ 0.403330] DMAR: dmar0: Using Queued invalidation |
| [ 0.403371] DMAR: dmar1: Using Queued invalidation |
| [ 0.403382] DMAR: Setting RMRR: |
| [ 0.403383] DMAR: Prepare 0-16MiB unity mapping for LPC |
| [ 0.403460] DMAR: Setting identity map for device 0000:00:1f.0 [0x0 - 0xffffff] |
| [ 0.403545] DMAR: Intel(R) Virtualization Technology for Directed I/O |
| [ 0.403593] iommu: Adding device 0000:00:00.0 to group 0 |
| [ 0.403600] iommu: Adding device 0000:00:02.0 to group 1 |
| [ 0.403606] iommu: Adding device 0000:00:14.0 to group 2 |
| [ 0.403613] iommu: Adding device 0000:00:19.0 to group 3 |
| [ 0.403620] iommu: Adding device 0000:00:1a.0 to group 4 |
| [ 0.403626] iommu: Adding device 0000:00:1b.0 to group 5 |
| [ 0.403634] iommu: Adding device 0000:00:1c.0 to group 6 |
| [ 0.403640] iommu: Adding device 0000:00:1c.1 to group 7 |
| [ 0.403648] iommu: Adding device 0000:00:1c.2 to group 8 |
| [ 0.403656] iommu: Adding device 0000:00:1d.0 to group 9 |
| [ 0.403669] iommu: Adding device 0000:00:1f.0 to group 10 |
| [ 0.403676] iommu: Adding device 0000:00:1f.2 to group 10 |
| [ 0.403682] iommu: Adding device 0000:00:1f.3 to group 10 |
| [ 0.403690] iommu: Adding device 0000:01:00.0 to group 11 |
| [ 0.403696] iommu: Adding device 0000:02:00.0 to group 12 |
| [ 0.403805] DMAR: DRHD: handling fault status reg 3 |
| [ 0.403812] DMAR: [DMA Write] Request device [00:02.0] fault addr 80cc0000 [fault reason 01] Present bit in root entry is clear |
| [ 0.404550] DMAR: DRHD: handling fault status reg 3 |
| [ 0.404553] DMAR: [DMA Write] Request device [00:02.0] fault addr 80d00000 [fault reason 01] Present bit in root entry is clear |
| [ 0.404557] DMAR: DRHD: handling fault status reg 3 |
| [ 0.404560] DMAR: [DMA Write] Request device [00:02.0] fault addr 80d30000 [fault reason 01] Present bit in root entry is clear |
| [ 0.405273] Scanning for low memory corruption every 60 seconds |
| [ 0.405298] DMAR: DRHD: handling fault status reg 3 |
| [ 0.405302] DMAR: [DMA Write] Request device [00:02.0] fault addr 80d40000 [fault reason 01] Present bit in root entry is clear |
| [ 0.405306] DMAR: DRHD: handling fault status reg 3 |
| [ 0.405309] DMAR: [DMA Write] Request device [00:02.0] fault addr 80d79000 [fault reason 01] Present bit in root entry is clear |
| [ 0.405780] Initialise system trusted keyrings |
| [ 0.405789] Key type blacklist registered |
| [ 0.405827] workingset: timestamp_bits=41 max_order=21 bucket_order=0 |
| [ 0.406042] DMAR: DRHD: handling fault status reg 3 |
| [ 0.406046] DMAR: [DMA Write] Request device [00:02.0] fault addr 80d80000 [fault reason 01] Present bit in root entry is clear |
| [ 0.406891] zbud: loaded |
| [ 0.407156] pstore: using lz4hc compression |
| [ 0.408027] Key type asymmetric registered |
| [ 0.408028] Asymmetric key parser 'x509' registered |
| [ 0.408053] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) |
| [ 0.408086] io scheduler noop registered |
| [ 0.408087] io scheduler deadline registered |
| [ 0.408123] io scheduler cfq registered (default) |
| [ 0.408124] io scheduler mq-deadline registered |
| [ 0.408124] io scheduler kyber registered |
| [ 0.408129] io scheduler bfq registered |
| [ 0.408928] pcieport 0000:00:1c.0: Signaling PME with IRQ 26 |
| [ 0.408949] pcieport 0000:00:1c.1: Signaling PME with IRQ 27 |
| [ 0.408970] pcieport 0000:00:1c.2: Signaling PME with IRQ 28 |
| [ 0.408992] pciehp 0000:00:1c.2:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+ |
| [ 0.409057] vesafb: mode is 1600x900x32, linelength=6400, pages=0 |
| [ 0.409058] vesafb: scrolling: redraw |
| [ 0.409060] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 |
| [ 0.409071] vesafb: framebuffer at 0xd0000000, mapped to 0x (ptrval), using 5632k, total 5632k |
| [ 0.409515] random: fast init done |
| [ 0.432150] random: crng init done |
| [ 0.447878] Console: switching to colour frame buffer device 200x56 |
| [ 0.486420] fb0: VESA VGA frame buffer device |
| [ 0.486433] intel_idle: MWAIT substates: 0x21120 |
| [ 0.486434] intel_idle: v0.4.1 model 0x3A |
| [ 0.486710] intel_idle: lapic_timer_reliable_states 0xffffffff |
| [ 0.486757] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:27/PNP0C09:00/PNP0C0E:00/input/input0 |
| [ 0.486770] ACPI: Sleep Button [SLPB] |
| [ 0.486802] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:27/PNP0C09:00/PNP0C0D:00/input/input1 |
| [ 0.486808] ACPI: Lid Switch [LID] |
| [ 0.486840] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 |
| [ 0.486845] ACPI: Power Button [PWRF] |
| [ 0.495564] thermal LNXTHERM:00: registered as thermal_zone0 |
| [ 0.495566] ACPI: Thermal Zone [THM0] (52 C) |
| [ 0.496462] thermal LNXTHERM:01: registered as thermal_zone1 |
| [ 0.496464] ACPI: Thermal Zone [THM1] (27 C) |
| [ 0.496599] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
| [ 0.497769] intel_pstate: Intel P-state driver initializing |
| [ 0.498189] ledtrig-cpu: registered to indicate activity on CPUs |
| [ 0.498631] NET: Registered protocol family 10 |
| [ 0.506460] Segment Routing with IPv6 |
| [ 0.506500] NET: Registered protocol family 17 |
| [ 0.507415] RAS: Correctable Errors collector initialized. |
| [ 0.507481] microcode: sig=0x306a9, pf=0x10, revision=0x1f |
| [ 0.507716] microcode: Microcode Update Driver: v2.2. |
| [ 0.507734] sched_clock: Marking stable (507706757, 0)->(496887758, 10818999) |
| [ 0.508237] registered taskstats version 1 |
| [ 0.508256] Loading compiled-in X.509 certificates |
| [ 0.508293] zswap: loaded using pool lzo/zbud |
| [ 0.512732] Key type big_key registered |
| [ 0.513041] Magic number: 10:523:145 |
| [ 0.513075] acpi device:16: hash matches |
| [ 0.513095] hctosys: unable to open rtc device (rtc0) |
| [ 0.515841] Freeing unused kernel memory: 1476K |
| [ 0.515844] Write protecting the kernel read-only data: 16384k |
| [ 0.516790] Freeing unused kernel memory: 2016K |
| [ 0.519156] Freeing unused kernel memory: 608K |
| [ 0.546251] Linux agpgart interface v0.103 |
| [ 0.582974] [drm] VT-d active for gfx access |
| [ 0.582976] checking generic (d0000000 580000) vs hw (d0000000 10000000) |
| [ 0.582977] fb: switching to inteldrmfb from VESA VGA |
| [ 0.582994] Console: switching to colour dummy device 80x25 |
| [ 0.583075] [drm] Replacing VGA console driver |
| [ 0.583085] [drm] DMAR active, disabling use of stolen memory |
| [ 0.633394] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). |
| [ 0.633394] [drm] Driver supports precise vblank timestamp query. |
| [ 0.633611] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem |
| [ 0.700907] [drm] Initialized i915 1.6.0 20180308 for 0000:00:02.0 on minor 0 |
| [ 0.701093] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) |
| [ 0.703132] acpi device:0b: registered as cooling_device9 |
| [ 0.703173] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3 |
| [ 0.839218] fbcon: inteldrmfb (fb0) is primary device |
| [ 0.844144] [drm:intel_set_cpu_fifo_underrun_reporting [i915]] *ERROR* uncleared fifo underrun on pipe A |
| [ 0.844215] [drm:intel_cpu_fifo_underrun_irq_handler [i915]] *ERROR* CPU pipe A FIFO underrun |
| [ 0.844288] [drm:intel_set_pch_fifo_underrun_reporting [i915]] *ERROR* uncleared pch fifo underrun on pch transcoder A |
| [ 0.844352] [drm:cpt_irq_handler [i915]] *ERROR* PCH transcoder A FIFO underrun |
| [ 0.845873] Console: switching to colour frame buffer device 200x56 |
| [ 0.870442] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device |
| [ 0.940626] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 |
| [ 0.942202] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| [ 0.942239] serio: i8042 AUX port at 0x60,0x64 irq 12 |
| [ 0.948212] ACPI: bus type USB registered |
| [ 0.948233] usbcore: registered new interface driver usbfs |
| [ 0.948241] usbcore: registered new interface driver hub |
| [ 0.948278] usbcore: registered new device driver usb |
| [ 0.949690] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| [ 0.949727] SCSI subsystem initialized |
| [ 0.951011] ehci-pci: EHCI PCI platform driver |
| [ 0.951190] ehci-pci 0000:00:1a.0: EHCI Host Controller |
| [ 0.951196] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 |
| [ 0.951210] ehci-pci 0000:00:1a.0: debug port 2 |
| [ 0.951654] sdhci: Secure Digital Host Controller Interface driver |
| [ 0.951655] sdhci: Copyright(c) Pierre Ossman |
| [ 0.954542] libata version 3.00 loaded. |
| [ 0.954837] sdhci-pci 0000:01:00.0: SDHCI controller found [1180:e822] (rev 7) |
| [ 0.955194] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported |
| [ 0.955210] ehci-pci 0000:00:1a.0: irq 21, io mem 0xe1636000 |
| [ 0.955314] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes |
| [ 0.955416] mmc0: SDHCI controller on PCI [0000:01:00.0] using DMA |
| [ 0.957877] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 |
| [ 0.966676] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 |
| [ 0.966731] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.17 |
| [ 0.966733] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 0.966734] usb usb1: Product: EHCI Host Controller |
| [ 0.966736] usb usb1: Manufacturer: Linux 4.17.3-1-ARCH ehci_hcd |
| [ 0.966737] usb usb1: SerialNumber: 0000:00:1a.0 |
| [ 0.966852] hub 1-0:1.0: USB hub found |
| [ 0.966859] hub 1-0:1.0: 3 ports detected |
| [ 0.967097] ehci-pci 0000:00:1d.0: EHCI Host Controller |
| [ 0.967103] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 |
| [ 0.967113] ehci-pci 0000:00:1d.0: debug port 2 |
| [ 0.971054] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported |
| [ 0.971070] ehci-pci 0000:00:1d.0: irq 19, io mem 0xe1637000 |
| [ 0.983342] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 |
| [ 0.983378] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.17 |
| [ 0.983380] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 0.983381] usb usb2: Product: EHCI Host Controller |
| [ 0.983383] usb usb2: Manufacturer: Linux 4.17.3-1-ARCH ehci_hcd |
| [ 0.983384] usb usb2: SerialNumber: 0000:00:1d.0 |
| [ 0.983475] hub 2-0:1.0: USB hub found |
| [ 0.983481] hub 2-0:1.0: 3 ports detected |
| [ 0.983715] xhci_hcd 0000:00:14.0: xHCI Host Controller |
| [ 0.983720] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 |
| [ 0.984837] xhci_hcd 0000:00:14.0: hcc params 0x200071a1 hci version 0x100 quirks 0x0000b930 |
| [ 0.984843] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported |
| [ 0.984974] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.17 |
| [ 0.984975] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 0.984977] usb usb3: Product: xHCI Host Controller |
| [ 0.984978] usb usb3: Manufacturer: Linux 4.17.3-1-ARCH xhci-hcd |
| [ 0.984979] usb usb3: SerialNumber: 0000:00:14.0 |
| [ 0.985066] hub 3-0:1.0: USB hub found |
| [ 0.985076] hub 3-0:1.0: 4 ports detected |
| [ 0.985211] xhci_hcd 0000:00:14.0: xHCI Host Controller |
| [ 0.985214] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 |
| [ 0.985217] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed |
| [ 0.985252] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.17 |
| [ 0.985254] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 0.985255] usb usb4: Product: xHCI Host Controller |
| [ 0.985256] usb usb4: Manufacturer: Linux 4.17.3-1-ARCH xhci-hcd |
| [ 0.985258] usb usb4: SerialNumber: 0000:00:14.0 |
| [ 0.985332] hub 4-0:1.0: USB hub found |
| [ 0.985341] hub 4-0:1.0: 4 ports detected |
| [ 0.985491] ahci 0000:00:1f.2: version 3.0 |
| [ 0.985652] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled |
| [ 0.996742] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x17 impl SATA mode |
| [ 0.996749] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst |
| [ 0.997745] scsi host0: ahci |
| [ 0.998150] scsi host1: ahci |
| [ 0.998542] scsi host2: ahci |
| [ 0.998768] scsi host3: ahci |
| [ 0.998941] scsi host4: ahci |
| [ 0.999060] scsi host5: ahci |
| [ 0.999177] ata1: SATA max UDMA/133 abar m2048@0xe1635000 port 0xe1635100 irq 31 |
| [ 0.999180] ata2: SATA max UDMA/133 abar m2048@0xe1635000 port 0xe1635180 irq 31 |
| [ 0.999183] ata3: SATA max UDMA/133 abar m2048@0xe1635000 port 0xe1635200 irq 31 |
| [ 0.999184] ata4: DUMMY |
| [ 0.999186] ata5: SATA max UDMA/133 abar m2048@0xe1635000 port 0xe1635300 irq 31 |
| [ 0.999187] ata6: DUMMY |
| [ 1.296779] usb 1-1: new high-speed USB device number 2 using ehci-pci |
| [ 1.313436] usb 2-1: new high-speed USB device number 2 using ehci-pci |
| [ 1.316761] usb 3-4: new high-speed USB device number 2 using xhci_hcd |
| [ 1.317675] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [ 1.318151] ata1.00: supports DRM functions and may not be fully accessible |
| [ 1.318965] ata1.00: disabling queued TRIM support |
| [ 1.318970] ata1.00: ATA-9: Samsung SSD 840 EVO 120GB, EXT0DB6Q, max UDMA/133 |
| [ 1.318974] ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA |
| [ 1.320406] ata1.00: supports DRM functions and may not be fully accessible |
| [ 1.321081] ata1.00: disabling queued TRIM support |
| [ 1.321709] ata1.00: configured for UDMA/133 |
| [ 1.332308] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 DB6Q PQ: 0 ANSI: 5 |
| [ 1.413445] tsc: Refined TSC clocksource calibration: 2693.879 MHz |
| [ 1.413463] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x26d4a7f100e, max_idle_ns: 440795249411 ns |
| [ 1.413522] clocksource: Switched to clocksource tsc |
| [ 1.444120] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 |
| [ 1.444125] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 1.444695] hub 1-1:1.0: USB hub found |
| [ 1.444833] hub 1-1:1.0: 6 ports detected |
| [ 1.459871] usb 3-4: New USB device found, idVendor=413c, idProduct=818e, bcdDevice= 0.00 |
| [ 1.459877] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [ 1.459880] usb 3-4: Product: DW5560 |
| [ 1.459883] usb 3-4: Manufacturer: Dell |
| [ 1.459886] usb 3-4: SerialNumber: 4F06E142AECAC2M0 |
| [ 1.460719] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 |
| [ 1.460724] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 1.461261] hub 2-1:1.0: USB hub found |
| [ 1.461401] hub 2-1:1.0: 8 ports detected |
| [ 1.647656] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [ 1.649213] ata2.00: ATA-8: HGST HTS541010A9E680, JA0OA560, max UDMA/133 |
| [ 1.649218] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA |
| [ 1.650856] ata2.00: configured for UDMA/133 |
| [ 1.651448] scsi 1:0:0:0: Direct-Access ATA HGST HTS541010A9 A560 PQ: 0 ANSI: 5 |
| [ 1.723446] usb 1-1.1: new full-speed USB device number 3 using ehci-pci |
| [ 1.827609] usb 1-1.1: New USB device found, idVendor=17ef, idProduct=1003, bcdDevice= 1.00 |
| [ 1.827614] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 1.827618] usb 1-1.1: Product: Integrated Smart Card Reader |
| [ 1.827620] usb 1-1.1: Manufacturer: Lenovo |
| [ 1.900109] usb 1-1.2: new full-speed USB device number 4 using ehci-pci |
| [ 1.964436] ata3: SATA link down (SStatus 0 SControl 300) |
| [ 2.001116] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c531, bcdDevice=21.00 |
| [ 2.001121] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 2.001124] usb 1-1.2: Product: USB Receiver |
| [ 2.001127] usb 1-1.2: Manufacturer: Logitech |
| [ 2.006554] hidraw: raw HID events driver (C) Jiri Kosina |
| [ 2.012210] usbcore: registered new interface driver usbhid |
| [ 2.012212] usbhid: USB HID core driver |
| [ 2.013559] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:046D:C531.0001/input/input6 |
| [ 2.013629] hid-generic 0003:046D:C531.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-1.2/input0 |
| [ 2.014127] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:046D:C531.0002/input/input7 |
| [ 2.070599] hid-generic 0003:046D:C531.0002: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1a.0-1.2/input1 |
| [ 2.073400] usb 1-1.3: new full-speed USB device number 5 using ehci-pci |
| [ 2.171924] usb 1-1.3: New USB device found, idVendor=147e, idProduct=2020, bcdDevice= 0.01 |
| [ 2.171929] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 2.171933] usb 1-1.3: Product: Biometric Coprocessor |
| [ 2.171935] usb 1-1.3: Manufacturer: Auth |
| [ 2.243445] usb 1-1.4: new full-speed USB device number 6 using ehci-pci |
| [ 2.277570] ata5: SATA link down (SStatus 0 SControl 300) |
| [ 2.290565] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) |
| [ 2.290567] sd 1:0:0:0: [sdb] 4096-byte physical blocks |
| [ 2.290575] sd 1:0:0:0: [sdb] Write Protect is off |
| [ 2.290576] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 |
| [ 2.290587] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 2.290674] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB) |
| [ 2.290687] sd 0:0:0:0: [sda] Write Protect is off |
| [ 2.290689] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 |
| [ 2.290710] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 2.293697] sda: sda1 sda2 sda3 sda4 |
| [ 2.294223] sd 0:0:0:0: [sda] supports TCG Opal |
| [ 2.294224] sd 0:0:0:0: [sda] Attached SCSI disk |
| [ 2.344864] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=21e6, bcdDevice= 1.12 |
| [ 2.344870] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [ 2.344872] usb 1-1.4: Product: BCM20702A0 |
| [ 2.344875] usb 1-1.4: Manufacturer: Broadcom Corp |
| [ 2.344877] usb 1-1.4: SerialNumber: 0C84DCD85B24 |
| [ 2.416781] usb 1-1.6: new high-speed USB device number 7 using ehci-pci |
| [ 2.521408] usb 1-1.6: New USB device found, idVendor=04f2, idProduct=b2db, bcdDevice= 5.64 |
| [ 2.521414] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 2.521417] usb 1-1.6: Product: Integrated Camera |
| [ 2.521420] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd. |
| [ 2.573415] sdb: sdb1 |
| [ 2.574041] sd 1:0:0:0: [sdb] Attached SCSI disk |
| [ 2.935063] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null) |
| [ 3.028929] systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time. |
| [ 3.058936] systemd[1]: systemd 238 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid) |
| [ 3.074035] systemd[1]: Detected architecture x86-64. |
| [ 3.081347] systemd[1]: Set hostname to <ThinkPad-T430>. |
| [ 3.282553] systemd[1]: Reached target User and Group Name Lookups. |
| [ 3.282714] systemd[1]: Reached target Remote File Systems. |
| [ 3.282851] systemd[1]: Listening on Journal Socket (/dev/log). |
| [ 3.283960] systemd[1]: Created slice system-getty.slice. |
| [ 3.284236] systemd[1]: Created slice system-systemd\x2dfsck.slice. |
| [ 3.284365] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. |
| [ 3.284577] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. |
| [ 3.303596] acpi_call: loading out-of-tree module taints kernel. |
| [ 3.314105] sd 0:0:0:0: Attached scsi generic sg0 type 0 |
| [ 3.314143] sd 1:0:0:0: Attached scsi generic sg1 type 0 |
| [ 3.317215] i2c /dev entries driver |
| [ 3.327660] fuse init (API version 7.26) |
| [ 3.332986] EXT4-fs (sda4): re-mounted. Opts: data=ordered |
| [ 3.354252] intel_rapl: Found RAPL domain package |
| [ 3.354253] intel_rapl: Found RAPL domain core |
| [ 3.354254] intel_rapl: Found RAPL domain uncore |
| [ 3.366378] systemd-journald[304]: Received request to flush runtime journal from PID 1 |
| [ 3.367432] vboxdrv: Found 8 processor cores |
| [ 3.368823] systemd-journald[304]: File /var/log/journal/b61a6df1305148d8a1e536aa7b05ee55/system.journal corrupted or uncleanly shut down, renaming and replacing. |
| [ 3.386900] vboxdrv: TSC mode is Invariant, tentative frequency 2693873468 Hz |
| [ 3.386901] vboxdrv: Successfully loaded version 5.2.14 (interface 0x00290001) |
| [ 3.388057] VBoxNetFlt: Successfully started. |
| [ 3.388563] VBoxNetAdp: Successfully started. |
| [ 3.389405] VBoxPciLinuxInit |
| [ 3.389408] vboxpci: IOMMU found |
| [ 3.399581] usbcore: registered new interface driver xpad |
| [ 3.510912] rtc_cmos 00:03: RTC can wake from S4 |
| [ 3.511991] rtc_cmos 00:03: registered as rtc0 |
| [ 3.512014] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs |
| [ 3.516695] Non-volatile memory driver v1.3 |
| [ 3.522103] ACPI: Battery Slot [BAT0] (battery present) |
| [ 3.522250] ACPI: Battery Slot [BAT1] (battery absent) |
| [ 3.522532] ACPI: AC Adapter [AC] (off-line) |
| [ 3.537038] thinkpad_acpi: ThinkPad ACPI Extras v0.26 |
| [ 3.537040] thinkpad_acpi: http://ibm-acpi.sf.net/ |
| [ 3.537041] thinkpad_acpi: ThinkPad BIOS CBET4000 4.8-704-gd837e66007, EC G1HT32WW-3.22 |
| [ 3.537042] thinkpad_acpi: Lenovo ThinkPad T430, model 2347B85 |
| [ 3.538856] thinkpad_acpi: radio switch found; radios are enabled |
| [ 3.538985] thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode |
| [ 3.539533] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver |
| [ 3.539534] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... |
| [ 3.543524] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one |
| [ 3.543602] thinkpad_acpi: Console audio control enabled, mode: monitor (read only) |
| [ 3.545056] thinkpad_acpi: battery 1 registered (start 0, stop 0) |
| [ 3.545061] battery: new extension: ThinkPad Battery Extension |
| [ 3.545113] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input8 |
| [ 3.569891] input: PC Speaker as /devices/platform/pcspkr/input/input9 |
| [ 3.570520] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 |
| [ 3.570751] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer |
| [ 3.570753] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules |
| [ 3.570754] RAPL PMU: hw unit of domain package 2^-16 Joules |
| [ 3.570755] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules |
| [ 3.570777] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt |
| [ 3.574391] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k |
| [ 3.574392] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. |
| [ 3.574461] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode |
| [ 3.579167] tpm_tis 00:06: 1.2 TPM (device-id 0x0, rev-id 78) |
| [ 3.626054] cfg80211: Loading compiled-in X.509 certificates for regulatory database |
| [ 3.627621] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' |
| [ 3.628216] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 |
| [ 3.628217] cfg80211: failed to load regulatory.db |
| [ 3.645420] gpio_ich: GPIO from 436 to 511 on gpio_ich |
| [ 3.645786] iTCO_vendor_support: vendor-support=0 |
| [ 3.646645] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 |
| [ 3.646763] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560) |
| [ 3.646864] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) |
| [ 3.718367] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock |
| [ 3.788524] ath: phy0: Enable LNA combining |
| [ 3.791161] ath: phy0: ASPM enabled: 0x43 |
| [ 3.791163] ath: EEPROM regdomain: 0x60 |
| [ 3.791163] ath: EEPROM indicates we should expect a direct regpair map |
| [ 3.791164] ath: Country alpha2 being used: 00 |
| [ 3.791164] ath: Regpair used: 0x60 |
| [ 3.800455] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' |
| [ 3.800836] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffa56e81650000, irq=17 |
| [ 3.802993] ath9k 0000:02:00.0 wlp2s0: renamed from wlan0 |
| [ 3.842699] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 28:d2:44:12:10:56 |
| [ 3.842711] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection |
| [ 3.842746] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF |
| [ 3.843210] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) |
| [ 3.845834] e1000e 0000:00:19.0 enp0s25: renamed from eth0 |
| [ 3.848763] cryptd: max_cpu_qlen set to 1000 |
| [ 3.852997] AVX version of gcm_enc/dec engaged. |
| [ 3.852998] AES CTR mode by8 optimization enabled |
| [ 3.870364] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3202: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker |
| [ 3.870367] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) |
| [ 3.870369] snd_hda_codec_realtek hdaudioC0D0: hp_outs=2 (0x15/0x1b/0x0/0x0/0x0) |
| [ 3.870371] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 |
| [ 3.870372] snd_hda_codec_realtek hdaudioC0D0: inputs: |
| [ 3.870373] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18 |
| [ 3.870375] snd_hda_codec_realtek hdaudioC0D0: Dock Mic=0x19 |
| [ 3.870376] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12 |
| [ 3.888421] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 |
| [ 3.893647] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 |
| [ 3.893726] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 |
| [ 3.893793] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 |
| [ 3.893851] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 |
| [ 3.893916] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16 |
| [ 3.893979] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17 |
| [ 3.894040] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18 |
| [ 4.092155] device-mapper: uevent: version 1.0.3 |
| [ 4.092250] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com |
| [ 4.110073] NET: Registered protocol family 38 |
| [ 4.125199] AVX2 instructions are not detected. |
| [ 4.258406] psmouse serio1: synaptics: queried max coordinates: x [..5470], y [..4498] |
| [ 4.269220] AVX2 instructions are not detected. |
| [ 4.323392] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b1/0xb40000/0xa0000/0x0, board id: 0, fw id: 920262 |
| [ 4.323400] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0 |
| [ 4.365677] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input10 |
| [ 4.368836] mousedev: PS/2 mouse device common for all mice |
| [ 4.800310] cdc_wdm 3-4:1.5: cdc-wdm1: USB WDM device |
| [ 4.800560] cdc_wdm 3-4:1.8: cdc-wdm2: USB WDM device |
| [ 4.800658] usbcore: registered new interface driver cdc_wdm |
| [ 4.800730] cdc_acm 3-4:1.1: ttyACM0: USB ACM device |
| [ 4.801378] cdc_acm 3-4:1.3: ttyACM1: USB ACM device |
| [ 4.804470] usbcore: registered new interface driver cdc_ncm |
| [ 4.805270] cdc_acm 3-4:1.9: ttyACM2: USB ACM device |
| [ 4.808338] usbcore: registered new interface driver cdc_acm |
| [ 4.808340] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters |
| [ 4.844778] cdc_mbim 3-4:1.6: cdc-wdm3: USB WDM device |
| [ 4.844981] cdc_mbim 3-4:1.6 wwan0: register 'cdc_mbim' at usb-0000:00:14.0-4, CDC MBIM, 1a:be:73:80:32:e2 |
| [ 4.845084] usbcore: registered new interface driver cdc_mbim |
| [ 4.849809] cdc_mbim 3-4:1.6 wwp0s20u4i6: renamed from wwan0 |
| [ 4.994096] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 |
| [ 5.128812] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready |
| [ 5.147760] media: Linux media interface: v0.10 |
| [ 5.164228] Linux video capture interface: v2.00 |
| [ 5.184914] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input19 |
| [ 5.210733] Bluetooth: Core ver 2.22 |
| [ 5.210781] NET: Registered protocol family 31 |
| [ 5.210783] Bluetooth: HCI device and connection manager initialized |
| [ 5.210787] Bluetooth: HCI socket layer initialized |
| [ 5.210789] Bluetooth: L2CAP socket layer initialized |
| [ 5.210795] Bluetooth: SCO socket layer initialized |
| [ 5.216820] usbcore: registered new interface driver btusb |
| [ 5.240792] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b2db) |
| [ 5.248508] uvcvideo 1-1.6:1.0: Entity type for entity Extension 4 was not initialized! |
| [ 5.248510] uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized! |
| [ 5.248512] uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized! |
| [ 5.248513] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized! |
| [ 5.248620] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input20 |
| [ 5.248700] usbcore: registered new interface driver uvcvideo |
| [ 5.248700] USB Video Class driver (1.1.1) |
| [ 5.251681] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 |
| [ 5.251683] Bluetooth: BNEP filters: protocol multicast |
| [ 5.251686] Bluetooth: BNEP socket layer initialized |
| [ 5.328519] Bluetooth: hci0: BCM: chip id 63 |
| [ 5.329532] Bluetooth: hci0: BCM: features 0x07 |
| [ 5.345557] Bluetooth: hci0: ThinkPad-T430 |
| [ 5.346556] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000 |
| [ 5.346776] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-21e6.hcd failed with error -2 |
| [ 5.346778] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-21e6.hcd not found |
| [ 5.377256] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready |
| [ 5.380348] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| [ 5.395996] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| [ 5.419099] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| [ 5.437901] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. |
| [ 5.454122] tun: Universal TUN/TAP device driver, 1.6 |
| [ 5.454676] virbr1: port 1(virbr1-nic) entered blocking state |
| [ 5.454799] virbr1: port 1(virbr1-nic) entered disabled state |
| [ 5.454852] device virbr1-nic entered promiscuous mode |
| [ 5.565804] virbr1: port 1(virbr1-nic) entered blocking state |
| [ 5.565807] virbr1: port 1(virbr1-nic) entered listening state |
| [ 5.598246] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| [ 5.613081] virbr1: port 1(virbr1-nic) entered disabled state |
| [ 5.613880] virbr0: port 1(virbr0-nic) entered blocking state |
| [ 5.613893] virbr0: port 1(virbr0-nic) entered disabled state |
| [ 5.613966] device virbr0-nic entered promiscuous mode |
| [ 5.734458] virbr0: port 1(virbr0-nic) entered blocking state |
| [ 5.734461] virbr0: port 1(virbr0-nic) entered listening state |
| [ 5.767579] virbr0: port 1(virbr0-nic) entered disabled state |
| [ 6.329856] cdc_wdm 3-4:1.8: wdm_int_callback - 0 bytes |
| [ 6.329864] cdc_wdm 3-4:1.5: wdm_int_callback - 0 bytes |
| [ 6.727802] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready |
| [ 7.107936] Bluetooth: RFCOMM TTY layer initialized |
| [ 7.107943] Bluetooth: RFCOMM socket layer initialized |
| [ 7.107949] Bluetooth: RFCOMM ver 1.11 |
| [ 7.900989] wlp2s0: authenticate with 34:ba:9a:38:e6:2e |
| [ 7.920933] wlp2s0: send auth to 34:ba:9a:38:e6:2e (try 1/3) |
| [ 7.922649] wlp2s0: authenticated |
| [ 7.923364] wlp2s0: associate with 34:ba:9a:38:e6:2e (try 1/3) |
| [ 7.930511] wlp2s0: RX AssocResp from 34:ba:9a:38:e6:2e (capab=0x431 status=0 aid=4) |
| [ 7.930732] wlp2s0: associated |
| [ 8.237681] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready |
| [ 8.302413] Adding 524284k swap on /var/lib/systemd-swap/swapfc/1. Priority:-2 extents:7 across:614396k SSFS |
| [ 12.253760] acpi_call: Cannot get handle: Error: AE_NOT_FOUND |
| [ 12.342306] acpi_call: Cannot get handle: Error: AE_NOT_FOUND |
| [ 17.731378] rfkill: input handler disabled |
| [ 1874.352484] usb 1-1.2: USB disconnect, device number 4 |
| [ 1893.458297] usb 1-1.2: new full-speed USB device number 8 using ehci-pci |
| [ 1893.559137] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c531, bcdDevice=21.00 |
| [ 1893.559143] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 1893.559146] usb 1-1.2: Product: USB Receiver |
| [ 1893.559149] usb 1-1.2: Manufacturer: Logitech |
| [ 1893.563722] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:046D:C531.0003/input/input21 |
| [ 1893.564296] hid-generic 0003:046D:C531.0003: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-1.2/input0 |
| [ 1893.567404] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:046D:C531.0004/input/input22 |
| [ 1893.622443] hid-generic 0003:046D:C531.0004: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1a.0-1.2/input1 |