blob: 3e058f5838b7c474e1467b0e7940d3cf11f0f302 [file] [log] [blame]
[ 0.000000] Linux version 5.10.0-14-amd64 (debian-kernel@lists.debian.org) (gcc-10 (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Debian 5.10.113-1 (2022-04-29)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-5.10.0-14-amd64 root=/dev/mapper/red--vg-root ro iomem=relaxed
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ff00fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007ff01000-0x00000000829fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000047d5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 3.0.0 present.
[ 0.000000] DMI: LENOVO 2349NY1/2349NY1, BIOS CBET4000 4.16-1239-gd5c31acee4 05/30/2022
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2194.999 MHz processor
[ 0.000618] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000621] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000626] last_pfn = 0x47d600 max_arch_pfn = 0x400000000
[ 0.000632] MTRR default type: uncachable
[ 0.000633] MTRR fixed ranges enabled:
[ 0.000635] 00000-9FFFF write-back
[ 0.000636] A0000-BFFFF uncachable
[ 0.000637] C0000-FFFFF write-back
[ 0.000638] MTRR variable ranges enabled:
[ 0.000639] 0 base 000000000 mask F80000000 write-back
[ 0.000641] 1 base 090000000 mask FF0000000 write-combining
[ 0.000642] 2 base 100000000 mask F00000000 write-back
[ 0.000643] 3 base 200000000 mask E00000000 write-back
[ 0.000644] 4 base 400000000 mask F80000000 write-back
[ 0.000645] 5 base 47D600000 mask FFFE00000 uncachable
[ 0.000646] 6 base 47D800000 mask FFF800000 uncachable
[ 0.000647] 7 base 47E000000 mask FFE000000 uncachable
[ 0.000648] 8 disabled
[ 0.000649] 9 disabled
[ 0.000999] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.001573] last_pfn = 0x7ff01 max_arch_pfn = 0x400000000
[ 0.014520] RAMDISK: [mem 0x32871000-0x3542ffff]
[ 0.014524] ACPI: Early table checksum verification disabled
[ 0.014527] ACPI: RSDP 0x00000000000F6770 000024 (v02 COREv4)
[ 0.014532] ACPI: XSDT 0x000000007FF2B0E0 000054 (v01 COREv4 COREBOOT 00000000 CORE 20210331)
[ 0.014539] ACPI: FACP 0x000000007FF2EB70 000114 (v06 COREv4 COREBOOT 00000000 CORE 20210331)
[ 0.014546] ACPI: DSDT 0x000000007FF2B280 0038E4 (v02 COREv4 COREBOOT 20141018 INTL 20210331)
[ 0.014550] ACPI: FACS 0x000000007FF2B240 000040
[ 0.014554] ACPI: FACS 0x000000007FF2B240 000040
[ 0.014557] ACPI: SSDT 0x000000007FF2EC90 002919 (v02 COREv4 COREBOOT 0000002A CORE 20210331)
[ 0.014562] ACPI: MCFG 0x000000007FF315B0 00003C (v01 COREv4 COREBOOT 00000000 CORE 20210331)
[ 0.014566] ACPI: TCPA 0x000000007FF315F0 000032 (v02 COREv4 COREBOOT 00000000 CORE 20210331)
[ 0.014570] ACPI: APIC 0x000000007FF31630 00008C (v03 COREv4 COREBOOT 00000000 CORE 20210331)
[ 0.014574] ACPI: HPET 0x000000007FF316C0 000038 (v01 COREv4 COREBOOT 00000000 CORE 20210331)
[ 0.014578] ACPI: Reserving FACP table memory at [mem 0x7ff2eb70-0x7ff2ec83]
[ 0.014580] ACPI: Reserving DSDT table memory at [mem 0x7ff2b280-0x7ff2eb63]
[ 0.014581] ACPI: Reserving FACS table memory at [mem 0x7ff2b240-0x7ff2b27f]
[ 0.014583] ACPI: Reserving FACS table memory at [mem 0x7ff2b240-0x7ff2b27f]
[ 0.014584] ACPI: Reserving SSDT table memory at [mem 0x7ff2ec90-0x7ff315a8]
[ 0.014585] ACPI: Reserving MCFG table memory at [mem 0x7ff315b0-0x7ff315eb]
[ 0.014587] ACPI: Reserving TCPA table memory at [mem 0x7ff315f0-0x7ff31621]
[ 0.014588] ACPI: Reserving APIC table memory at [mem 0x7ff31630-0x7ff316bb]
[ 0.014589] ACPI: Reserving HPET table memory at [mem 0x7ff316c0-0x7ff316f7]
[ 0.014599] ACPI: Local APIC address 0xfee00000
[ 0.014657] No NUMA configuration found
[ 0.014659] Faking a node at [mem 0x0000000000000000-0x000000047d5fffff]
[ 0.014673] NODE_DATA(0) allocated [mem 0x47d5c9000-0x47d5f2fff]
[ 0.015204] Zone ranges:
[ 0.015206] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.015208] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.015210] Normal [mem 0x0000000100000000-0x000000047d5fffff]
[ 0.015212] Device empty
[ 0.015214] Movable zone start for each node
[ 0.015218] Early memory node ranges
[ 0.015220] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.015221] node 0: [mem 0x0000000000100000-0x000000007ff00fff]
[ 0.015223] node 0: [mem 0x0000000100000000-0x000000047d5fffff]
[ 0.015227] Initmem setup node 0 [mem 0x0000000000001000-0x000000047d5fffff]
[ 0.015229] On node 0 totalpages: 4183199
[ 0.015230] DMA zone: 64 pages used for memmap
[ 0.015231] DMA zone: 21 pages reserved
[ 0.015232] DMA zone: 3998 pages, LIFO batch:0
[ 0.015233] DMA32 zone: 8125 pages used for memmap
[ 0.015235] DMA32 zone: 519937 pages, LIFO batch:63
[ 0.015236] Normal zone: 57176 pages used for memmap
[ 0.015236] Normal zone: 3659264 pages, LIFO batch:63
[ 0.015241] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.015287] On node 0, zone DMA: 97 pages in unavailable ranges
[ 0.021827] On node 0, zone Normal: 255 pages in unavailable ranges
[ 0.021965] On node 0, zone Normal: 10752 pages in unavailable ranges
[ 0.021974] Reserving Intel graphics memory at [mem 0x80a00000-0x829fffff]
[ 0.022188] ACPI: PM-Timer IO Port: 0x508
[ 0.022190] ACPI: Local APIC address 0xfee00000
[ 0.022208] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.022211] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.022213] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.022215] ACPI: IRQ0 used by override.
[ 0.022217] ACPI: IRQ9 used by override.
[ 0.022219] Using ACPI (MADT) for SMP configuration information
[ 0.022221] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.022226] TSC deadline timer available
[ 0.022228] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.022241] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.022243] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.022244] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.022245] PM: hibernation: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.022247] PM: hibernation: Registered nosave memory: [mem 0x7ff01000-0x829fffff]
[ 0.022249] PM: hibernation: Registered nosave memory: [mem 0x82a00000-0xefffffff]
[ 0.022250] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
[ 0.022251] PM: hibernation: Registered nosave memory: [mem 0xf4000000-0xfed3ffff]
[ 0.022253] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[ 0.022254] PM: hibernation: Registered nosave memory: [mem 0xfed45000-0xffffffff]
[ 0.022256] [mem 0x82a00000-0xefffffff] available for PCI devices
[ 0.022258] Booting paravirtualized kernel on bare hardware
[ 0.022261] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.027350] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.027594] percpu: Embedded 58 pages/cpu s200536 r8192 d28840 u262144
[ 0.027601] pcpu-alloc: s200536 r8192 d28840 u262144 alloc=1*2097152
[ 0.027602] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.027636] Built 1 zonelists, mobility grouping on. Total pages: 4117813
[ 0.027638] Policy zone: Normal
[ 0.027640] Kernel command line: BOOT_IMAGE=/vmlinuz-5.10.0-14-amd64 root=/dev/mapper/red--vg-root ro iomem=relaxed
[ 0.028683] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ 0.029178] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.029284] mem auto-init: stack:off, heap alloc:on, heap free:off
[ 0.045841] Memory: 2116136K/16732796K available (12295K kernel code, 2545K rwdata, 7572K rodata, 2416K init, 3672K bss, 434540K reserved, 0K cma-reserved)
[ 0.045852] random: get_random_u64 called from __kmem_cache_create+0x2a/0x4d0 with crng_init=0
[ 0.045995] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.046010] Kernel/User page tables isolation: enabled
[ 0.046028] ftrace: allocating 36462 entries in 143 pages
[ 0.061596] ftrace: allocated 143 pages with 5 groups
[ 0.061732] rcu: Hierarchical RCU implementation.
[ 0.061734] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
[ 0.061736] Rude variant of Tasks RCU enabled.
[ 0.061737] Tracing variant of Tasks RCU enabled.
[ 0.061738] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.061740] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.066565] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16
[ 0.066807] random: crng done (trusting CPU's manufacturer)
[ 0.066832] spurious 8259A interrupt: IRQ7.
[ 0.067152] Console: colour dummy device 80x25
[ 0.067339] printk: console [tty0] enabled
[ 0.067356] ACPI: Core revision 20200925
[ 0.067435] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.067453] APIC: Switch to symmetric I/O mode setup
[ 0.067525] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.067921] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.087453] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fa3be80aab, max_idle_ns: 440795204461 ns
[ 0.087460] Calibrating delay loop (skipped), value calculated using timer frequency.. 4389.99 BogoMIPS (lpj=8779996)
[ 0.087466] pid_max: default: 32768 minimum: 301
[ 0.087499] LSM: Security Framework initializing
[ 0.087511] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.087542] AppArmor: AppArmor initialized
[ 0.087546] TOMOYO Linux initialized
[ 0.087590] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.087624] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.087925] mce: CPU0: Thermal monitoring enabled (TM1)
[ 0.087944] process: using mwait in idle threads
[ 0.087948] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.087950] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.087955] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.087959] Spectre V2 : Mitigation: Retpolines
[ 0.087961] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.087964] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.087967] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.087970] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[ 0.087973] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.087978] SRBDS: Vulnerable: No microcode
[ 0.087980] MDS: Mitigation: Clear CPU buffers
[ 0.088122] Freeing SMP alternatives memory: 32K
[ 0.090249] smpboot: CPU0: Intel(R) Core(TM) i7-3632QM CPU @ 2.20GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[ 0.090433] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.090445] ... version: 3
[ 0.090447] ... bit width: 48
[ 0.090449] ... generic registers: 4
[ 0.090451] ... value mask: 0000ffffffffffff
[ 0.090453] ... max period: 00007fffffffffff
[ 0.090455] ... fixed-purpose events: 3
[ 0.090457] ... event mask: 000000070000000f
[ 0.090609] rcu: Hierarchical SRCU implementation.
[ 0.091386] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.091458] smp: Bringing up secondary CPUs ...
[ 0.091458] x86: Booting SMP configuration:
[ 0.091458] .... node #0, CPUs: #1
[ 0.091483] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[ 0.091643] #2 #3 #4 #5 #6 #7
[ 0.103529] smp: Brought up 1 node, 8 CPUs
[ 0.103529] smpboot: Max logical packages: 1
[ 0.103529] smpboot: Total of 8 processors activated (35119.98 BogoMIPS)
[ 0.128535] node 0 deferred pages initialised in 24ms
[ 0.131868] devtmpfs: initialized
[ 0.131868] x86/mm: Memory block size: 128MB
[ 0.132828] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.132828] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.132828] pinctrl core: initialized pinctrl subsystem
[ 0.132828] NET: Registered protocol family 16
[ 0.132828] audit: initializing netlink subsys (disabled)
[ 0.132828] audit: type=2000 audit(1653909790.064:1): state=initialized audit_enabled=0 res=1
[ 0.132828] thermal_sys: Registered thermal governor 'fair_share'
[ 0.132828] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.132828] thermal_sys: Registered thermal governor 'step_wise'
[ 0.132828] thermal_sys: Registered thermal governor 'user_space'
[ 0.132828] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.132828] cpuidle: using governor ladder
[ 0.132828] cpuidle: using governor menu
[ 0.132828] ACPI: bus type PCI registered
[ 0.132828] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.132828] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.132828] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.132828] PCI: Using configuration type 1 for base access
[ 0.132828] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.132828] Kprobes globally optimized
[ 0.135488] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.327911] ACPI: Added _OSI(Module Device)
[ 0.327911] ACPI: Added _OSI(Processor Device)
[ 0.327911] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.327911] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.327911] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.327911] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.327911] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.334018] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.335018] ACPI: EC: EC started
[ 0.335022] ACPI: EC: interrupt blocked
[ 0.335306] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.335310] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC used to handle transactions
[ 0.335313] ACPI: Interpreter enabled
[ 0.335331] ACPI: (supports S0 S3 S4 S5)
[ 0.335334] ACPI: Using IOAPIC for interrupt routing
[ 0.335354] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.335513] ACPI: Enabled 1 GPEs in block 00 to 3F
[ 0.339650] ACPI: Power Resource [FPWR] (off)
[ 0.339983] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.339990] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.340045] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[ 0.340057] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.340150] acpi PNP0A08:00: ignoring host bridge window [mem 0x000c4000-0x000c7fff window] (conflicts with Video ROM [mem 0x000c0000-0x000c6dff])
[ 0.340327] PCI host bridge to bus 0000:00
[ 0.340331] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.340334] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.340337] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.340340] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.340343] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.340346] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.340350] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.340353] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.340356] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.340359] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.340362] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.340366] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.340369] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.340372] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.340375] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[ 0.340378] pci_bus 0000:00: root bus resource [mem 0x82a00000-0xefffffff window]
[ 0.340382] pci_bus 0000:00: root bus resource [mem 0x47d600001-0xfffffffff window]
[ 0.340385] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[ 0.340389] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.340404] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.340518] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 0.340531] pci 0000:00:02.0: reg 0x10: [mem 0x82c00000-0x82ffffff 64bit]
[ 0.340539] pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit pref]
[ 0.340546] pci 0000:00:02.0: reg 0x20: [io 0x1000-0x103f]
[ 0.340675] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.340698] pci 0000:00:14.0: reg 0x10: [mem 0x83820000-0x8382ffff 64bit]
[ 0.340773] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.340916] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.340999] pci 0000:00:16.0: reg 0x10: [mem 0x83839000-0x8383900f 64bit]
[ 0.341337] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.341477] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[ 0.341494] pci 0000:00:19.0: reg 0x10: [mem 0x83800000-0x8381ffff]
[ 0.341505] pci 0000:00:19.0: reg 0x14: [mem 0x83834000-0x83834fff]
[ 0.341515] pci 0000:00:19.0: reg 0x18: [io 0x1040-0x105f]
[ 0.341580] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.341664] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.341683] pci 0000:00:1a.0: reg 0x10: [mem 0x83836000-0x838363ff]
[ 0.341772] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.341874] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.341895] pci 0000:00:1b.0: reg 0x10: [mem 0x83830000-0x83833fff 64bit]
[ 0.341979] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.342088] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.342241] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.342375] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 0.342528] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.342661] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[ 0.342841] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.342953] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.342972] pci 0000:00:1d.0: reg 0x10: [mem 0x83837000-0x838373ff]
[ 0.343063] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.343162] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100
[ 0.343358] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.343374] pci 0000:00:1f.2: reg 0x10: [io 0x1080-0x1087]
[ 0.343383] pci 0000:00:1f.2: reg 0x14: [io 0x1090-0x1093]
[ 0.343393] pci 0000:00:1f.2: reg 0x18: [io 0x1088-0x108f]
[ 0.343402] pci 0000:00:1f.2: reg 0x1c: [io 0x1094-0x1097]
[ 0.343411] pci 0000:00:1f.2: reg 0x20: [io 0x1060-0x107f]
[ 0.343421] pci 0000:00:1f.2: reg 0x24: [mem 0x83835000-0x838357ff]
[ 0.343466] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.343555] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.343576] pci 0000:00:1f.3: reg 0x10: [mem 0x83838000-0x838380ff 64bit]
[ 0.343599] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.343831] pci 0000:01:00.0: MMC controller base frequency changed to 50Mhz.
[ 0.343845] pci 0000:01:00.0: [1180:e823] type 00 class 0x080501
[ 0.343895] pci 0000:01:00.0: reg 0x10: [mem 0x82a00000-0x82a000ff]
[ 0.344227] pci 0000:01:00.0: supports D1 D2
[ 0.344229] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.344474] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.344484] pci 0000:00:1c.0: bridge window [mem 0x82a00000-0x82afffff]
[ 0.344612] pci 0000:02:00.0: [168c:002a] type 00 class 0x028000
[ 0.344671] pci 0000:02:00.0: reg 0x10: [mem 0x82b00000-0x82b0ffff 64bit]
[ 0.344975] pci 0000:02:00.0: supports D1
[ 0.344978] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
[ 0.345167] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.345189] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.345197] pci 0000:00:1c.1: bridge window [mem 0x82b00000-0x82bfffff]
[ 0.345266] pci 0000:00:1c.2: PCI bridge to [bus 03-0b]
[ 0.345272] pci 0000:00:1c.2: bridge window [io 0x2000-0x3fff]
[ 0.345278] pci 0000:00:1c.2: bridge window [mem 0x83000000-0x837fffff]
[ 0.345286] pci 0000:00:1c.2: bridge window [mem 0x47d600000-0x48d5fffff 64bit pref]
[ 0.345473] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.345531] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.345584] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.345636] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.345688] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.345740] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.345791] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.345843] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.346635] ACPI: EC: interrupt unblocked
[ 0.346639] ACPI: EC: event unblocked
[ 0.346646] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.346648] ACPI: EC: GPE=0x11
[ 0.346651] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC initialization complete
[ 0.346654] ACPI: \_SB_.PCI0.LPCB.EC__: EC: Used to handle transactions and events
[ 0.346725] iommu: Default domain type: Translated
[ 0.346743] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.346743] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.346743] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.346743] vgaarb: loaded
[ 0.346743] EDAC MC: Ver: 3.0.0
[ 0.346743] NetLabel: Initializing
[ 0.346743] NetLabel: domain hash size = 128
[ 0.346743] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.346743] NetLabel: unlabeled traffic allowed by default
[ 0.346743] PCI: Using ACPI for IRQ routing
[ 0.348879] PCI: pci_cache_line_size set to 64 bytes
[ 0.348885] pci 0000:00:1c.2: can't claim BAR 15 [mem 0x47d600000-0x48d5fffff 64bit pref]: no compatible bridge window
[ 0.348891] pci 0000:00:1c.2: [mem 0x47d600000-0x48d5fffff 64bit pref] clipped to [mem 0x47d600001-0x48d5fffff 64bit pref]
[ 0.348896] pci 0000:00:1c.2: bridge window [mem 0x47d600001-0x48d5fffff 64bit pref]
[ 0.348972] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.348974] e820: reserve RAM buffer [mem 0x7ff01000-0x7fffffff]
[ 0.348975] e820: reserve RAM buffer [mem 0x47d600000-0x47fffffff]
[ 0.348998] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.349006] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.351041] clocksource: Switched to clocksource tsc-early
[ 0.359262] VFS: Disk quotas dquot_6.6.0
[ 0.359286] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.359419] AppArmor: AppArmor Filesystem Enabled
[ 0.359441] pnp: PnP ACPI init
[ 0.359654] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.359658] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.359662] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.359665] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.359668] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.359671] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.359674] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.359677] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.359680] system 00:00: [mem 0x20000000-0x201fffff] could not be reserved
[ 0.359683] system 00:00: [mem 0x40000000-0x401fffff] could not be reserved
[ 0.359692] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.360233] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.360241] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.360280] system 00:02: [io 0x0500-0x057f] has been reserved
[ 0.360284] system 00:02: [io 0x0480-0x04bf] has been reserved
[ 0.360290] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.360308] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.360339] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.360364] pnp 00:05: Plug and Play ACPI device, IDs LEN0015 PNP0f13 (active)
[ 0.360395] pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active)
[ 0.360410] pnp: PnP ACPI: found 7 devices
[ 0.366370] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.366445] NET: Registered protocol family 2
[ 0.366624] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.369297] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 0.369392] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.369652] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.369749] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.369806] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.369861] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.369933] NET: Registered protocol family 1
[ 0.369943] NET: Registered protocol family 44
[ 0.369959] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.369968] pci 0000:00:1c.0: bridge window [mem 0x82a00000-0x82afffff]
[ 0.369979] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.369985] pci 0000:00:1c.1: bridge window [mem 0x82b00000-0x82bfffff]
[ 0.369995] pci 0000:00:1c.2: PCI bridge to [bus 03-0b]
[ 0.370000] pci 0000:00:1c.2: bridge window [io 0x2000-0x3fff]
[ 0.370006] pci 0000:00:1c.2: bridge window [mem 0x83000000-0x837fffff]
[ 0.370012] pci 0000:00:1c.2: bridge window [mem 0x47d600001-0x48d5fffff 64bit pref]
[ 0.370022] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.370025] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.370028] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.370030] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.370033] pci_bus 0000:00: resource 8 [mem 0x000c8000-0x000cbfff window]
[ 0.370036] pci_bus 0000:00: resource 9 [mem 0x000cc000-0x000cffff window]
[ 0.370039] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window]
[ 0.370042] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window]
[ 0.370045] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window]
[ 0.370048] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window]
[ 0.370051] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window]
[ 0.370054] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window]
[ 0.370057] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window]
[ 0.370060] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window]
[ 0.370062] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff window]
[ 0.370066] pci_bus 0000:00: resource 19 [mem 0x82a00000-0xefffffff window]
[ 0.370068] pci_bus 0000:00: resource 20 [mem 0x47d600001-0xfffffffff window]
[ 0.370071] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff window]
[ 0.370075] pci_bus 0000:01: resource 1 [mem 0x82a00000-0x82afffff]
[ 0.370078] pci_bus 0000:02: resource 1 [mem 0x82b00000-0x82bfffff]
[ 0.370080] pci_bus 0000:03: resource 0 [io 0x2000-0x3fff]
[ 0.370083] pci_bus 0000:03: resource 1 [mem 0x83000000-0x837fffff]
[ 0.370086] pci_bus 0000:03: resource 2 [mem 0x47d600001-0x48d5fffff 64bit pref]
[ 0.370157] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.370718] PCI: CLS 64 bytes, default 64
[ 0.370776] Trying to unpack rootfs image as initramfs...
[ 1.181791] Freeing initrd memory: 44796K
[ 1.181955] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.181959] software IO TLB: mapped [mem 0x000000007bf01000-0x000000007ff01000] (64MB)
[ 1.182517] Initialise system trusted keyrings
[ 1.182530] Key type blacklist registered
[ 1.182594] workingset: timestamp_bits=36 max_order=22 bucket_order=0
[ 1.183829] zbud: loaded
[ 1.184015] integrity: Platform Keyring initialized
[ 1.184020] Key type asymmetric registered
[ 1.184022] Asymmetric key parser 'x509' registered
[ 1.184031] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 1.184083] io scheduler mq-deadline registered
[ 1.184420] pcieport 0000:00:1c.0: PME: Signaling with IRQ 24
[ 1.184621] pcieport 0000:00:1c.1: PME: Signaling with IRQ 25
[ 1.184814] pcieport 0000:00:1c.2: PME: Signaling with IRQ 26
[ 1.184847] pcieport 0000:00:1c.2: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[ 1.184986] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.185005] intel_idle: MWAIT substates: 0x21120
[ 1.185006] intel_idle: v0.5.1 model 0x3A
[ 1.185430] intel_idle: Local APIC timer is reliable in all C-states
[ 1.187493] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.187498] ACPI: Thermal Zone [THM0] (61 C)
[ 1.188383] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.188387] ACPI: Thermal Zone [THM1] (27 C)
[ 1.188537] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.189157] Linux agpgart interface v0.103
[ 1.189194] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug.
[ 1.189720] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.191192] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.191199] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.191349] mousedev: PS/2 mouse device common for all mice
[ 1.191392] rtc_cmos 00:03: RTC can wake from S4
[ 1.191633] rtc_cmos 00:03: registered as rtc0
[ 1.191694] rtc_cmos 00:03: setting system clock to 2022-05-30T11:23:11 UTC (1653909791)
[ 1.191725] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.191738] intel_pstate: Intel P-state driver initializing
[ 1.192386] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.192654] NET: Registered protocol family 10
[ 1.192656] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.199867] Segment Routing with IPv6
[ 1.199901] mip6: Mobile IPv6
[ 1.199904] NET: Registered protocol family 17
[ 1.200071] mpls_gso: MPLS GSO support
[ 1.201015] microcode: sig=0x306a9, pf=0x10, revision=0x21
[ 1.201068] microcode: Microcode Update Driver: v2.2.
[ 1.201071] IPI shorthand broadcast: enabled
[ 1.201081] sched_clock: Marking stable (1200257753, 681070)->(1211170331, -10231508)
[ 1.201237] registered taskstats version 1
[ 1.201241] Loading compiled-in X.509 certificates
[ 1.233063] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[ 1.233079] Loaded X.509 cert 'Debian Secure Boot Signer 2021 - linux: 4b6ef5abca669825178e052c84667ccbc0531f8c'
[ 1.233111] zswap: loaded using pool lzo/zbud
[ 1.233660] Key type ._fscrypt registered
[ 1.233664] Key type .fscrypt registered
[ 1.233665] Key type fscrypt-provisioning registered
[ 1.233698] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.234896] Freeing unused kernel image (initmem) memory: 2416K
[ 1.275580] Write protecting the kernel read-only data: 22528k
[ 1.276092] Freeing unused kernel image (text/rodata gap) memory: 2040K
[ 1.276276] Freeing unused kernel image (rodata/data gap) memory: 620K
[ 1.323485] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.323488] x86/mm: Checking user space page tables
[ 1.368310] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.368317] Run /init as init process
[ 1.368319] with arguments:
[ 1.368320] /init
[ 1.368320] with environment:
[ 1.368321] HOME=/
[ 1.368321] TERM=linux
[ 1.368322] BOOT_IMAGE=/vmlinuz-5.10.0-14-amd64
[ 1.482287] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:29/PNP0C09:00/PNP0C0E:00/input/input2
[ 1.488444] pps_core: LinuxPPS API ver. 1 registered
[ 1.488454] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 1.491454] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20200925/utaddress-204)
[ 1.491479] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.491485] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20200925/utaddress-204)
[ 1.491497] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.491508] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20200925/utaddress-204)
[ 1.491518] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.491531] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20200925/utaddress-204)
[ 1.491542] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.491547] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 1.495517] ACPI: Sleep Button [SLPB]
[ 1.495605] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:29/PNP0C09:00/PNP0C0D:00/input/input3
[ 1.495660] ACPI: Lid Switch [LID]
[ 1.495731] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 1.495777] ACPI: Power Button [PWRF]
[ 1.500816] battery: ACPI: Battery Slot [BAT0] (battery present)
[ 1.500988] battery: ACPI: Battery Slot [BAT1] (battery absent)
[ 1.501434] cryptd: max_cpu_qlen set to 1000
[ 1.503164] PTP clock support registered
[ 1.503524] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 1.503741] i2c i2c-0: 2/2 memory slots populated (from DMI)
[ 1.509780] i2c i2c-0: Successfully instantiated SPD at 0x50
[ 1.510124] i2c i2c-0: Successfully instantiated SPD at 0x51
[ 1.516908] AVX version of gcm_enc/dec engaged.
[ 1.516915] AES CTR mode by8 optimization enabled
[ 1.520516] e1000e: Intel(R) PRO/1000 Network Driver
[ 1.520523] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.520714] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 1.524760] ACPI: bus type USB registered
[ 1.524761] sdhci: Secure Digital Host Controller Interface driver
[ 1.524764] sdhci: Copyright(c) Pierre Ossman
[ 1.524798] usbcore: registered new interface driver usbfs
[ 1.524812] usbcore: registered new interface driver hub
[ 1.524829] usbcore: registered new device driver usb
[ 1.526552] SCSI subsystem initialized
[ 1.531021] sdhci-pci 0000:01:00.0: SDHCI controller found [1180:e823] (rev 4)
[ 1.531252] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes
[ 1.533934] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.534905] ehci-pci: EHCI PCI platform driver
[ 1.535081] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.535092] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.535109] ehci-pci 0000:00:1a.0: debug port 2
[ 1.539033] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.539133] ehci-pci 0000:00:1a.0: irq 19, io mem 0x83836000
[ 1.539445] mmc0: SDHCI controller on PCI [0000:01:00.0] using DMA
[ 1.544505] libata version 3.00 loaded.
[ 1.551474] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.551556] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[ 1.551561] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.551564] usb usb1: Product: EHCI Host Controller
[ 1.551566] usb usb1: Manufacturer: Linux 5.10.0-14-amd64 ehci_hcd
[ 1.551568] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.551692] hub 1-0:1.0: USB hub found
[ 1.551705] hub 1-0:1.0: 3 ports detected
[ 1.551829] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.551838] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.552918] xhci_hcd 0000:00:14.0: hcc params 0x200071a1 hci version 0x100 quirks 0x000000000000b930
[ 1.552934] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.553120] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[ 1.553124] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.553126] usb usb2: Product: xHCI Host Controller
[ 1.553128] usb usb2: Manufacturer: Linux 5.10.0-14-amd64 xhci-hcd
[ 1.553130] usb usb2: SerialNumber: 0000:00:14.0
[ 1.553271] hub 2-0:1.0: USB hub found
[ 1.553284] hub 2-0:1.0: 4 ports detected
[ 1.553419] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.553431] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
[ 1.553450] ehci-pci 0000:00:1d.0: debug port 2
[ 1.553454] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.553461] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 1.553466] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 1.553525] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
[ 1.553530] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.553533] usb usb4: Product: xHCI Host Controller
[ 1.553536] usb usb4: Manufacturer: Linux 5.10.0-14-amd64 xhci-hcd
[ 1.553538] usb usb4: SerialNumber: 0000:00:14.0
[ 1.553661] hub 4-0:1.0: USB hub found
[ 1.553679] hub 4-0:1.0: 4 ports detected
[ 1.553770] ahci 0000:00:1f.2: version 3.0
[ 1.553998] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 1.557371] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.557389] ehci-pci 0000:00:1d.0: irq 18, io mem 0x83837000
[ 1.564097] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x17 impl SATA mode
[ 1.564105] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst
[ 1.564895] scsi host0: ahci
[ 1.565071] scsi host1: ahci
[ 1.565217] scsi host2: ahci
[ 1.565358] scsi host3: ahci
[ 1.565491] scsi host4: ahci
[ 1.565594] scsi host5: ahci
[ 1.565636] ata1: SATA max UDMA/133 abar m2048@0x83835000 port 0x83835100 irq 29
[ 1.565641] ata2: SATA max UDMA/133 abar m2048@0x83835000 port 0x83835180 irq 29
[ 1.565645] ata3: SATA max UDMA/133 abar m2048@0x83835000 port 0x83835200 irq 29
[ 1.565647] ata4: DUMMY
[ 1.565650] ata5: SATA max UDMA/133 abar m2048@0x83835000 port 0x83835300 irq 29
[ 1.565652] ata6: DUMMY
[ 1.571480] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.571602] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[ 1.571607] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.571610] usb usb3: Product: EHCI Host Controller
[ 1.571612] usb usb3: Manufacturer: Linux 5.10.0-14-amd64 ehci_hcd
[ 1.571614] usb usb3: SerialNumber: 0000:00:1d.0
[ 1.571812] hub 3-0:1.0: USB hub found
[ 1.571828] hub 3-0:1.0: 3 ports detected
[ 1.634039] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[ 1.657047] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 1.707762] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.732093] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:21:cc:db:db:61
[ 1.732102] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 1.732165] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
[ 1.775222] [drm] Initialized i915 1.6.0 20200917 for 0000:00:02.0 on minor 0
[ 1.775414] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.800261] acpi device:0d: registered as cooling_device9
[ 1.800327] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 1.807533] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.815554] usb 2-3: new high-speed USB device number 2 using xhci_hcd
[ 1.835553] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 1.882223] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.964147] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 1.964164] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.964555] hub 1-1:1.0: USB hub found
[ 1.964710] hub 1-1:1.0: 6 ports detected
[ 1.974648] usb 2-3: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=92.26
[ 1.974656] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.974659] usb 2-3: Product: USB2.0 Hub
[ 1.974661] usb 2-3: Manufacturer: GenesysLogic
[ 1.975117] hub 2-3:1.0: USB hub found
[ 1.975408] hub 2-3:1.0: 4 ports detected
[ 1.995800] usb 3-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 1.995804] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.995955] hub 3-1:1.0: USB hub found
[ 1.996049] hub 3-1:1.0: 8 ports detected
[ 2.197582] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.215468] tsc: Refined TSC clocksource calibration: 2195.013 MHz
[ 2.215479] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fa3cbf1da7, max_idle_ns: 440795275681 ns
[ 2.215497] clocksource: Switched to clocksource tsc
[ 2.218980] psmouse serio1: synaptics: queried max coordinates: x [..5470], y [..4498]
[ 2.222526] fbcon: i915drmfb (fb0) is primary device
[ 2.255487] usb 1-1.6: new high-speed USB device number 3 using ehci-pci
[ 2.279743] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b1/0xb40000/0xa0000/0x0, board id: 0, fw id: 920262
[ 2.279752] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[ 2.287542] usb 3-1.8: new high-speed USB device number 3 using ehci-pci
[ 2.318921] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[ 2.375394] usb 1-1.6: New USB device found, idVendor=04f2, idProduct=b2db, bcdDevice= 5.64
[ 2.375398] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.375400] usb 1-1.6: Product: Integrated Camera
[ 2.375402] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd.
[ 2.395989] usb 3-1.8: New USB device found, idVendor=17ef, idProduct=100a, bcdDevice= 0.00
[ 2.395993] usb 3-1.8: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.396663] hub 3-1.8:1.0: USB hub found
[ 2.397073] hub 3-1.8:1.0: 7 ports detected
[ 2.510491] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.516724] ata3.00: ATA-10: Dogfish SSD 1TB, T0519A0, max UDMA/133
[ 2.516727] ata3.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 2.526394] ata3.00: configured for UDMA/133
[ 2.536898] scsi 2:0:0:0: Direct-Access ATA Dogfish SSD 1TB 9A0 PQ: 0 ANSI: 5
[ 2.687529] usb 3-1.8.2: new full-speed USB device number 4 using ehci-pci
[ 2.802241] usb 3-1.8.2: New USB device found, idVendor=17ef, idProduct=6047, bcdDevice= 3.30
[ 2.802245] usb 3-1.8.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.802248] usb 3-1.8.2: Product: ThinkPad Compact USB Keyboard with TrackPoint
[ 2.802249] usb 3-1.8.2: Manufacturer: Lenovo
[ 2.850604] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.959411] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 3.040047] usb 2-3-port1: Cannot enable. Maybe the USB cable is bad?
[ 3.160675] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input7
[ 3.193975] Console: switching to colour frame buffer device 200x56
[ 3.217410] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[ 3.235424] e1000e 0000:00:19.0 eno0: renamed from eth0
[ 3.243478] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 3.245272] sd 2:0:0:0: [sda] Write Protect is off
[ 3.246449] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.246489] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.247917] hid: raw HID events driver (C) Jiri Kosina
[ 3.292978] sda: sda1 sda2 < sda5 >
[ 3.339597] sd 2:0:0:0: [sda] Attached SCSI disk
[ 3.350107] usbcore: registered new interface driver usbhid
[ 3.352896] usbhid: USB HID core driver
[ 3.359456] input: Lenovo ThinkPad Compact USB Keyboard with TrackPoint as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.8/3-1.8.2/3-1.8.2:1.0/0003:17EF:6047.0001/input/input8
[ 3.419751] lenovo 0003:17EF:6047.0001: input,hidraw0: USB HID v1.00 Keyboard [Lenovo ThinkPad Compact USB Keyboard with TrackPoint] on usb-0000:00:1d.0-1.8.2/input0
[ 3.421447] input: Lenovo ThinkPad Compact USB Keyboard with TrackPoint as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.8/3-1.8.2/3-1.8.2:1.1/0003:17EF:6047.0002/input/input9
[ 3.480028] lenovo 0003:17EF:6047.0002: input,hiddev0,hidraw1: USB HID v1.00 Mouse [Lenovo ThinkPad Compact USB Keyboard with TrackPoint] on usb-0000:00:1d.0-1.8.2/input1
[ 3.676405] device-mapper: uevent: version 1.0.3
[ 3.678081] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com
[ 3.904018] usb 2-3-port1: Cannot enable. Maybe the USB cable is bad?
[ 3.905881] usb 2-3-port1: attempt power cycle
[ 5.275563] usb 2-3.4: new full-speed USB device number 6 using xhci_hcd
[ 5.378658] usb 2-3.4: New USB device found, idVendor=046d, idProduct=0a49, bcdDevice= 0.30
[ 5.381885] usb 2-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5.385052] usb 2-3.4: Product: Logitech H820e
[ 5.388150] usb 2-3.4: Manufacturer: Logitech Inc
[ 5.391190] usb 2-3.4: SerialNumber: 0000000000
[ 5.399254] input: Logitech Inc Logitech H820e Consumer Control as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.4/2-3.4:1.3/0003:046D:0A49.0003/input/input10
[ 5.459688] input: Logitech Inc Logitech H820e as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.4/2-3.4:1.3/0003:046D:0A49.0003/input/input11
[ 5.463329] hid-generic 0003:046D:0A49.0003: input,hiddev1,hidraw2: USB HID v1.11 Device [Logitech Inc Logitech H820e] on usb-0000:00:14.0-3.4/input3
[ 17.223955] PM: Image not found (code -22)
[ 17.343152] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[ 17.417345] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[ 17.589089] systemd[1]: Inserted module 'autofs4'
[ 17.614984] systemd[1]: systemd 247.3-7 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
[ 17.635750] systemd[1]: Detected architecture x86-64.
[ 17.638667] systemd[1]: Set hostname to <red>.
[ 17.859745] systemd[1]: /lib/systemd/system/plymouth-start.service:16: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
[ 17.898722] systemd[1]: Queued start job for default target Graphical Interface.
[ 17.932908] systemd[1]: Created slice system-getty.slice.
[ 17.933359] systemd[1]: Created slice system-modprobe.slice.
[ 17.933706] systemd[1]: Created slice Cryptsetup Units Slice.
[ 17.934008] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 17.934315] systemd[1]: Created slice system-tor.slice.
[ 17.934599] systemd[1]: Created slice User and Session Slice.
[ 17.934689] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 17.934886] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 17.934978] systemd[1]: Reached target User and Group Name Lookups.
[ 17.935008] systemd[1]: Reached target Remote File Systems.
[ 17.935033] systemd[1]: Reached target Slices.
[ 17.935141] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 17.935277] systemd[1]: Listening on LVM2 poll daemon socket.
[ 17.935383] systemd[1]: Listening on Syslog Socket.
[ 17.935505] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 17.935577] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 17.935756] systemd[1]: Listening on Journal Audit Socket.
[ 17.935865] systemd[1]: Listening on Journal Socket (/dev/log).
[ 17.935998] systemd[1]: Listening on Journal Socket.
[ 17.936140] systemd[1]: Listening on udev Control Socket.
[ 17.936242] systemd[1]: Listening on udev Kernel Socket.
[ 17.937058] systemd[1]: Mounting Huge Pages File System...
[ 17.937826] systemd[1]: Mounting POSIX Message Queue File System...
[ 17.938709] systemd[1]: Mounting Kernel Debug File System...
[ 17.939520] systemd[1]: Mounting Kernel Trace File System...
[ 17.939722] systemd[1]: Finished Availability of block devices.
[ 17.940667] systemd[1]: Starting Set the console keyboard layout...
[ 17.941544] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 17.942367] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ 17.943116] systemd[1]: Starting Load Kernel Module configfs...
[ 17.943936] systemd[1]: Starting Load Kernel Module drm...
[ 17.944802] systemd[1]: Starting Load Kernel Module fuse...
[ 17.945595] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 17.945688] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 17.947691] systemd[1]: Starting Journal Service...
[ 17.950744] systemd[1]: Starting Load Kernel Modules...
[ 17.951946] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 17.953173] systemd[1]: Starting Coldplug All udev Devices...
[ 17.955750] systemd[1]: Mounted Huge Pages File System.
[ 17.955962] systemd[1]: Mounted POSIX Message Queue File System.
[ 17.956139] systemd[1]: Mounted Kernel Debug File System.
[ 17.956306] systemd[1]: Mounted Kernel Trace File System.
[ 17.956782] systemd[1]: Finished Set the console keyboard layout.
[ 17.957307] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 17.957678] systemd[1]: modprobe@configfs.service: Succeeded.
[ 17.957948] systemd[1]: Finished Load Kernel Module configfs.
[ 17.958307] systemd[1]: modprobe@drm.service: Succeeded.
[ 17.958565] systemd[1]: Finished Load Kernel Module drm.
[ 17.959992] systemd[1]: Mounting Kernel Configuration File System...
[ 17.961014] fuse: init (API version 7.32)
[ 17.961658] systemd[1]: modprobe@fuse.service: Succeeded.
[ 17.961877] systemd[1]: Finished Load Kernel Module fuse.
[ 17.962767] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro
[ 17.963201] systemd[1]: Mounted Kernel Configuration File System.
[ 17.963604] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 17.964600] systemd[1]: Mounting FUSE Control File System...
[ 17.966778] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 17.966833] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[ 17.967623] systemd[1]: Starting Load/Save Random Seed...
[ 17.968461] systemd[1]: Starting Create System Users...
[ 17.969414] systemd[1]: Mounted FUSE Control File System.
[ 17.976954] systemd[1]: Finished Load/Save Random Seed.
[ 17.977188] systemd[1]: Condition check resulted in First Boot Complete being skipped.
[ 17.978231] lp: driver loaded but no devices found
[ 17.981994] ppdev: user-space parallel port driver
[ 17.986249] systemd[1]: Finished Create System Users.
[ 17.987193] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 18.001825] systemd[1]: Finished Load Kernel Modules.
[ 18.002869] systemd[1]: Starting Apply Kernel Variables...
[ 18.013722] systemd[1]: Finished Apply Kernel Variables.
[ 18.014182] systemd[1]: Finished Create Static Device Nodes in /dev.
[ 18.015680] systemd[1]: Starting Rule-based Manager for Device Events and Files...
[ 18.020681] systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
[ 18.020857] systemd[1]: Reached target Local File Systems (Pre).
[ 18.032356] systemd[1]: Started Journal Service.
[ 18.038936] systemd-journald[461]: Received client request to flush runtime journal.
[ 18.243596] tpm_tis 00:06: 1.2 TPM (device-id 0x0, rev-id 78)
[ 18.284237] input: PC Speaker as /devices/platform/pcspkr/input/input12
[ 18.284526] ACPI: AC Adapter [AC] (on-line)
[ 18.285858] at24 0-0050: supply vcc not found, using dummy regulator
[ 18.287485] at24 0-0050: 256 byte spd EEPROM, read-only
[ 18.287526] at24 0-0051: supply vcc not found, using dummy regulator
[ 18.288213] at24 0-0051: 256 byte spd EEPROM, read-only
[ 18.288333] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 18.289094] iTCO_vendor_support: vendor-support=0
[ 18.345742] Non-volatile memory driver v1.3
[ 18.346076] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 18.346119] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560)
[ 18.346250] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 18.380356] mc: Linux media interface: v0.10
[ 18.383099] thinkpad_acpi: ThinkPad ACPI Extras v0.26
[ 18.383102] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 18.383103] thinkpad_acpi: ThinkPad BIOS CBET4000 4.16-1239-gd5c31acee4, EC G1HT36WW-3.22
[ 18.383104] thinkpad_acpi: Lenovo ThinkPad T430, model 2349NY1
[ 18.383687] thinkpad_acpi: radio switch found; radios are enabled
[ 18.383815] thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode
[ 18.383831] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 18.383832] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 18.386153] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 18.386219] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 18.387642] thinkpad_acpi: battery 1 registered (start 0, stop 100)
[ 18.387651] battery: new extension: ThinkPad Battery Extension
[ 18.387707] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input13
[ 18.451888] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 18.452219] cfg80211: Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf'
[ 18.452524] cfg80211: Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
[ 18.452833] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 18.454685] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 18.454686] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 18.454687] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 18.454687] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ 18.456319] platform regulatory.0: firmware: direct-loading firmware regulatory.db
[ 18.457133] platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s
[ 18.471179] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[ 18.474276] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[ 18.474285] ext2 filesystem being mounted at /boot supports timestamps until 2038 (0x7fffffff)
[ 18.515567] Adding 999420k swap on /dev/mapper/red--vg-swap_1. Priority:-2 extents:1 across:999420k SSFS
[ 18.541153] audit: type=1400 audit(1653909808.843:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=604 comm="apparmor_parser"
[ 18.541159] audit: type=1400 audit(1653909808.843:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=604 comm="apparmor_parser"
[ 18.541466] audit: type=1400 audit(1653909808.843:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=606 comm="apparmor_parser"
[ 18.541653] audit: type=1400 audit(1653909808.843:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=609 comm="apparmor_parser"
[ 18.541657] audit: type=1400 audit(1653909808.843:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=609 comm="apparmor_parser"
[ 18.541661] audit: type=1400 audit(1653909808.843:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=609 comm="apparmor_parser"
[ 18.541713] audit: type=1400 audit(1653909808.843:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=607 comm="apparmor_parser"
[ 18.559948] audit: type=1400 audit(1653909808.863:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=608 comm="apparmor_parser"
[ 18.560372] audit: type=1400 audit(1653909808.863:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="system_tor" pid=611 comm="apparmor_parser"
[ 18.568587] audit: type=1400 audit(1653909808.871:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=621 comm="apparmor_parser"
[ 20.355473] mei_me 0000:00:16.0: wait hw ready failed
[ 20.355478] mei_me 0000:00:16.0: hw_start failed ret = -62
[ 20.355497] mei_me 0000:00:16.0: H_RST is set = 0x80000015
[ 22.371479] mei_me 0000:00:16.0: wait hw ready failed
[ 22.371484] mei_me 0000:00:16.0: hw_start failed ret = -62
[ 22.371502] mei_me 0000:00:16.0: H_RST is set = 0x80000015
[ 22.751080] rfkill: input handler disabled
[ 24.387503] mei_me 0000:00:16.0: wait hw ready failed
[ 24.387515] mei_me 0000:00:16.0: hw_start failed ret = -62
[ 24.387526] mei_me 0000:00:16.0: reset: reached maximal consecutive resets: disabling the device
[ 24.387529] mei_me 0000:00:16.0: reset failed ret = -19
[ 24.387532] mei_me 0000:00:16.0: link layer initialization failed.
[ 24.387535] mei_me 0000:00:16.0: init hw failure.
[ 24.387621] mei_me 0000:00:16.0: initialization failed.
[ 24.412157] videodev: Linux video capture interface: v2.00
[ 24.433694] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b2db)
[ 24.439748] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input14
[ 24.439845] usbcore: registered new interface driver uvcvideo
[ 24.439850] USB Video Class driver (1.1.1)
[ 24.511763] intel_rapl_common: Found RAPL domain package
[ 24.511770] intel_rapl_common: Found RAPL domain core
[ 24.511772] intel_rapl_common: Found RAPL domain uncore
[ 24.514721] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 24.517962] usbcore: registered new interface driver snd-usb-audio
[ 24.523878] ath: phy0: Enable WAR for ASPM D3/L1
[ 24.958476] ath: EEPROM regdomain: 0x6b
[ 24.958478] ath: EEPROM indicates we should expect a direct regpair map
[ 24.958480] ath: Country alpha2 being used: 00
[ 24.958481] ath: Regpair used: 0x6b
[ 24.958491] ------------[ cut here ]------------
[ 24.958499] WARNING: CPU: 5 PID: 506 at drivers/net/wireless/ath/regd.c:244 ath_regd_init.cold+0xda/0x13c [ath]
[ 24.958500] Modules linked in: ath9k(+) snd_hda_intel ath9k_common intel_rapl_msr snd_intel_dspcfg intel_rapl_common ath9k_hw soundwire_intel soundwire_generic_allocation ath snd_soc_core snd_compress mac80211 soundwire_cadence uvcvideo snd_hda_codec videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 snd_usb_audio videobuf2_common snd_hda_core videodev snd_usbmidi_lib snd_hwdep soundwire_bus snd_rawmidi snd_seq_device x86_pkg_temp_thermal overlay intel_powerclamp coretemp kvm_intel kvm irqbypass rapl intel_cstate snd_pcm thinkpad_acpi cfg80211 mc iTCO_wdt intel_uncore snd_timer nvram mei_me intel_pmc_bxt ledtrig_audio libarc4 joydev snd iTCO_vendor_support sg at24 soundcore mei rfkill serio_raw watchdog pcspkr ac tpm_tis tpm_tis_core tpm evdev rng_core cuse msr parport_pc ppdev lp parport fuse configfs ip_tables x_tables autofs4 ext4 crc16 mbcache jbd2 crc32c_generic dm_crypt dm_mod hid_lenovo hid_generic usbhid hid crc32_pclmul crc32c_intel sd_mod t10_pi crc_t10dif crct10dif_generic
[ 24.958552] crct10dif_pclmul crct10dif_common ghash_clmulni_intel i915 ahci i2c_algo_bit xhci_pci libahci xhci_hcd drm_kms_helper libata ehci_pci ehci_hcd sdhci_pci cqhci cec sdhci usbcore e1000e aesni_intel drm scsi_mod libaes i2c_i801 ptp crypto_simd psmouse cryptd glue_helper mmc_core i2c_smbus lpc_ich pps_core usb_common fan battery video button
[ 24.958576] CPU: 5 PID: 506 Comm: systemd-udevd Not tainted 5.10.0-14-amd64 #1 Debian 5.10.113-1
[ 24.958577] Hardware name: LENOVO 2349NY1/2349NY1, BIOS CBET4000 4.16-1239-gd5c31acee4 05/30/2022
[ 24.958580] RIP: 0010:ath_regd_init.cold+0xda/0x13c [ath]
[ 24.958583] Code: e6 4c 89 c7 f3 a5 eb 84 49 8b 54 24 10 0f b7 12 66 83 fa 6c 77 14 66 83 fa 64 77 1f 74 53 66 83 fa 63 74 56 66 83 fa 5f 77 59 <0f> 0b 48 c7 c6 80 74 61 c1 83 cf 0b 89 7d 38 eb 8b 83 ea 65 be 01
[ 24.958584] RSP: 0018:ffffaabe00493b28 EFLAGS: 00010246
[ 24.958586] RAX: 0000000000000000 RBX: ffff946c9f2dc018 RCX: 0000000000000006
[ 24.958587] RDX: 0000000000000000 RSI: ffffffffc16175c0 RDI: 0000000000000000
[ 24.958588] RBP: ffff946cc54c0300 R08: ffff946c9f2dc168 R09: ffffaabe00493930
[ 24.958589] R10: ffffaabe00493928 R11: ffffffffb10cb408 R12: ffff946c9f2dc150
[ 24.958590] R13: ffff946cc54c0800 R14: ffff946c9f2dc018 R15: 0000000000000000
[ 24.958592] FS: 00007f0f1bb5e8c0(0000) GS:ffff946fed340000(0000) knlGS:0000000000000000
[ 24.958593] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 24.958594] CR2: 000056259fb8bde0 CR3: 00000001108ca006 CR4: 00000000001706e0
[ 24.958595] Call Trace:
[ 24.958605] ? ath9k_op_ps_wakeup+0x10/0x10 [ath9k]
[ 24.958611] ath9k_init_device+0xcbb/0xe10 [ath9k]
[ 24.958615] ? request_threaded_irq+0xf8/0x160
[ 24.958621] ath_pci_probe+0x1db/0x290 [ath9k]
[ 24.958625] ? pinctrl_put+0x40/0x40
[ 24.958628] local_pci_probe+0x42/0x80
[ 24.958632] ? _cond_resched+0x16/0x40
[ 24.958634] pci_device_probe+0xfd/0x1b0
[ 24.958638] really_probe+0x222/0x480
[ 24.958640] driver_probe_device+0xe1/0x150
[ 24.958643] device_driver_attach+0xa1/0xb0
[ 24.958645] __driver_attach+0x8a/0x150
[ 24.958647] ? device_driver_attach+0xb0/0xb0
[ 24.958649] ? device_driver_attach+0xb0/0xb0
[ 24.958651] bus_for_each_dev+0x78/0xc0
[ 24.958654] bus_add_driver+0x12b/0x1e0
[ 24.958655] driver_register+0x8b/0xe0
[ 24.958661] ? set_use_msi+0x15/0x15 [ath9k]
[ 24.958665] ath9k_init+0xa/0xfeb [ath9k]
[ 24.958669] do_one_initcall+0x44/0x1d0
[ 24.958672] ? do_init_module+0x23/0x240
[ 24.958675] ? kmem_cache_alloc_trace+0xf5/0x200
[ 24.958677] do_init_module+0x4c/0x240
[ 24.958679] __do_sys_finit_module+0xb1/0x110
[ 24.958683] do_syscall_64+0x33/0x80
[ 24.958685] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 24.958687] RIP: 0033:0x7f0f1c0179b9
[ 24.958689] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d a7 54 0c 00 f7 d8 64 89 01 48
[ 24.958690] RSP: 002b:00007ffc80a0ddd8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[ 24.958692] RAX: ffffffffffffffda RBX: 000056259fb965f0 RCX: 00007f0f1c0179b9
[ 24.958693] RDX: 0000000000000000 RSI: 00007f0f1c1a2e2d RDI: 0000000000000014
[ 24.958694] RBP: 0000000000020000 R08: 0000000000000000 R09: 000056259fba23e0
[ 24.958695] R10: 0000000000000014 R11: 0000000000000246 R12: 00007f0f1c1a2e2d
[ 24.958696] R13: 0000000000000000 R14: 000056259fba69b0 R15: 000056259fb965f0
[ 24.958698] ---[ end trace 2498ee07057ff01a ]---
[ 24.964875] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 24.965234] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xffffaabe014a0000, irq=17
[ 24.975670] ath9k 0000:02:00.0 wlp2s0: renamed from wlan0
[ 24.986113] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3202: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 24.986117] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 24.986119] snd_hda_codec_realtek hdaudioC0D0: hp_outs=2 (0x15/0x1b/0x0/0x0/0x0)
[ 24.986120] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 24.986121] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 24.986123] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 24.986125] snd_hda_codec_realtek hdaudioC0D0: Dock Mic=0x19
[ 24.986126] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 25.035398] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 25.035500] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 25.035578] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 25.035661] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[ 25.035733] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
[ 25.035805] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
[ 25.035880] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21
[ 25.035947] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input22
[ 28.676541] rfkill: input handler enabled
[ 29.780589] wlp2s0: authenticate with 60:14:66:ff:9f:1a
[ 29.801323] wlp2s0: send auth to 60:14:66:ff:9f:1a (try 1/3)
[ 29.804471] wlp2s0: authenticated
[ 29.811489] wlp2s0: associate with 60:14:66:ff:9f:1a (try 1/3)
[ 29.832819] wlp2s0: RX AssocResp from 60:14:66:ff:9f:1a (capab=0x411 status=0 aid=1)
[ 29.832989] wlp2s0: associated
[ 29.833089] ath: EEPROM regdomain: 0x8028
[ 29.833090] ath: EEPROM indicates we should expect a country code
[ 29.833091] ath: doing EEPROM country->regdmn map search
[ 29.833092] ath: country maps to regdmn code: 0x37
[ 29.833094] ath: Country alpha2 being used: AT
[ 29.833095] ath: Regpair used: 0x37
[ 29.833097] ath: regdomain 0x8028 dynamically updated by country element
[ 29.872067] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 31.474489] rfkill: input handler disabled
[ 32.815232] kauditd_printk_skb: 13 callbacks suppressed
[ 32.815234] audit: type=1400 audit(1653909823.115:25): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=1992 comm="apparmor_parser"
[ 33.008447] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 33.011058] Bridge firewalling registered
[ 33.088346] Initializing XFRM netlink socket
[ 43.790268] traps: pool-tracker-st[1356] trap int3 ip:7f8764e79ca7 sp:7f8753f9ed60 error:0 in libglib-2.0.so.0.6600.8[7f8764e3d000+88000]