blob: 41cba50d11b0c1eace9fbb43cdffcadb6d9c976d [file] [log] [blame]
[ 0.000000] Linux version 5.3.0-29-generic (buildd@lcy01-amd64-024) (gcc version 9.2.1 20191008 (Ubuntu 9.2.1-9ubuntu2)) #31-Ubuntu SMP Fri Jan 17 17:27:26 UTC 2020 (Ubuntu 5.3.0-29.31-generic 5.3.13)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-5.3.0-29-generic root=/dev/mapper/vgubuntu-root ro quiet splash iomem=relaxed vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Hygon HygonGenuine
[ 0.000000] Centaur CentaurHauls
[ 0.000000] zhaoxin Shanghai
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007faadfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007faae000-0x000000007fb2dfff] type 20
[ 0.000000] BIOS-e820: [mem 0x000000007fb2e000-0x000000007fbf1fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007fbf2000-0x000000007fbfcfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007fbfd000-0x000000007fbfdfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007fbfe000-0x000000007fed9fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007feda000-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000047b5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.70 by EDK II
[ 0.000000] efi: ACPI 2.0=0x7feec000 SMBIOS=0x7feda000
[ 0.000000] secureboot: Secure boot could not be determined (mode 0)
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: HP EliteBook 8460p/EliteBook 8460p, BIOS 4.11-1094-g94e5ceea8c 02/03/2020
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2693.791 MHz processor
[ 0.000011] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000012] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000016] last_pfn = 0x47b600 max_arch_pfn = 0x400000000
[ 0.000020] MTRR default type: write-back
[ 0.000021] MTRR fixed ranges enabled:
[ 0.000022] 00000-9FFFF write-back
[ 0.000023] A0000-BFFFF uncachable
[ 0.000023] C0000-FFFFF write-back
[ 0.000024] MTRR variable ranges enabled:
[ 0.000025] 0 base 080000000 mask FC0000000 uncachable
[ 0.000026] 1 base 0C0000000 mask FF0000000 uncachable
[ 0.000027] 2 base 0D0000000 mask FF0000000 write-combining
[ 0.000028] 3 base 0E0000000 mask FE0000000 uncachable
[ 0.000028] 4 disabled
[ 0.000029] 5 disabled
[ 0.000029] 6 disabled
[ 0.000030] 7 disabled
[ 0.000030] 8 disabled
[ 0.000030] 9 disabled
[ 0.000462] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000623] last_pfn = 0x7feda max_arch_pfn = 0x400000000
[ 0.010741] check: Scanning 1 areas for low memory corruption
[ 0.010747] BRK [0x420401000, 0x420401fff] PGTABLE
[ 0.010749] BRK [0x420402000, 0x420402fff] PGTABLE
[ 0.010750] BRK [0x420403000, 0x420403fff] PGTABLE
[ 0.010792] BRK [0x420404000, 0x420404fff] PGTABLE
[ 0.010793] BRK [0x420405000, 0x420405fff] PGTABLE
[ 0.010934] BRK [0x420406000, 0x420406fff] PGTABLE
[ 0.010968] BRK [0x420407000, 0x420407fff] PGTABLE
[ 0.011084] BRK [0x420408000, 0x420408fff] PGTABLE
[ 0.011313] RAMDISK: [mem 0x2e5c1000-0x332d7fff]
[ 0.011320] ACPI: Early table checksum verification disabled
[ 0.011324] ACPI: RSDP 0x000000007FEEC000 000024 (v02 COREv4)
[ 0.011327] ACPI: XSDT 0x000000007FBFDF18 000064 (v01 COREv4 COREBOOT 00000000 CORE 20190703)
[ 0.011333] ACPI: FACP 0x000000007FEEF740 0000F4 (v04 COREv4 COREBOOT 00000000 CORE 20190703)
[ 0.011338] ACPI: DSDT 0x000000007FEEC280 0034BA (v02 COREv4 COREBOOT 20141018 INTL 20190703)
[ 0.011341] ACPI: FACS 0x000000007FEEC240 000040
[ 0.011344] ACPI: FACS 0x000000007FEEC240 000040
[ 0.011346] ACPI: SSDT 0x000000007FEEF840 003185 (v02 COREv4 COREBOOT 0000002A CORE 20190703)
[ 0.011349] ACPI: MCFG 0x000000007FEF29D0 00003C (v01 COREv4 COREBOOT 00000000 CORE 20190703)
[ 0.011351] ACPI: TCPA 0x000000007FEF2A10 000032 (v02 COREv4 COREBOOT 00000000 CORE 20190703)
[ 0.011354] ACPI: APIC 0x000000007FEF2A50 00008C (v02 COREv4 COREBOOT 00000000 CORE 20190703)
[ 0.011356] ACPI: DMAR 0x000000007FEF2AE0 0000D0 (v01 COREv4 COREBOOT 00000000 CORE 20190703)
[ 0.011359] ACPI: HPET 0x000000007FEF2BB0 000038 (v01 COREv4 COREBOOT 00000000 CORE 20190703)
[ 0.011362] ACPI: BGRT 0x000000007FBFD018 000038 (v00 INTEL EDK2 00001720 PTL 00000002)
[ 0.011369] ACPI: Local APIC address 0xfee00000
[ 0.011461] No NUMA configuration found
[ 0.011462] Faking a node at [mem 0x0000000000000000-0x000000047b5fffff]
[ 0.011472] NODE_DATA(0) allocated [mem 0x47b5c8000-0x47b5f2fff]
[ 0.011750] Zone ranges:
[ 0.011751] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.011752] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.011753] Normal [mem 0x0000000100000000-0x000000047b5fffff]
[ 0.011754] Device empty
[ 0.011755] Movable zone start for each node
[ 0.011758] Early memory node ranges
[ 0.011759] node 0: [mem 0x0000000000001000-0x000000000009ffff]
[ 0.011760] node 0: [mem 0x0000000000100000-0x000000007faadfff]
[ 0.011760] node 0: [mem 0x000000007fbf2000-0x000000007fbfcfff]
[ 0.011761] node 0: [mem 0x000000007fbfe000-0x000000007fed9fff]
[ 0.011762] node 0: [mem 0x0000000100000000-0x000000047b5fffff]
[ 0.011776] Zeroed struct page in unavailable ranges: 716 pages
[ 0.011777] Initmem setup node 0 [mem 0x0000000000001000-0x000000047b5fffff]
[ 0.011779] On node 0 totalpages: 4174644
[ 0.011780] DMA zone: 64 pages used for memmap
[ 0.011780] DMA zone: 1064 pages reserved
[ 0.011781] DMA zone: 3999 pages, LIFO batch:0
[ 0.011835] DMA32 zone: 8119 pages used for memmap
[ 0.011836] DMA32 zone: 519573 pages, LIFO batch:63
[ 0.020965] Normal zone: 57048 pages used for memmap
[ 0.020967] Normal zone: 3651072 pages, LIFO batch:63
[ 0.066906] Reserving Intel graphics memory at [mem 0x80a00000-0x829fffff]
[ 0.067184] ACPI: PM-Timer IO Port: 0x508
[ 0.067187] ACPI: Local APIC address 0xfee00000
[ 0.067204] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.067207] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.067208] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.067209] ACPI: IRQ0 used by override.
[ 0.067210] ACPI: IRQ9 used by override.
[ 0.067212] Using ACPI (MADT) for SMP configuration information
[ 0.067213] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.067225] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.067237] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.067238] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.067239] PM: Registered nosave memory: [mem 0x7faae000-0x7fb2dfff]
[ 0.067240] PM: Registered nosave memory: [mem 0x7fb2e000-0x7fbf1fff]
[ 0.067241] PM: Registered nosave memory: [mem 0x7fbfd000-0x7fbfdfff]
[ 0.067242] PM: Registered nosave memory: [mem 0x7feda000-0x7fffffff]
[ 0.067243] PM: Registered nosave memory: [mem 0x80000000-0x809fffff]
[ 0.067243] PM: Registered nosave memory: [mem 0x80a00000-0x829fffff]
[ 0.067244] PM: Registered nosave memory: [mem 0x82a00000-0xffffffff]
[ 0.067245] [mem 0x82a00000-0xffffffff] available for PCI devices
[ 0.067246] Booting paravirtualized kernel on bare hardware
[ 0.067248] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.067254] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.067453] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u262144
[ 0.067458] pcpu-alloc: s184320 r8192 d28672 u262144 alloc=1*2097152
[ 0.067459] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.067485] Built 1 zonelists, mobility grouping on. Total pages: 4108349
[ 0.067485] Policy zone: Normal
[ 0.067486] Kernel command line: BOOT_IMAGE=/vmlinuz-5.3.0-29-generic root=/dev/mapper/vgubuntu-root ro quiet splash iomem=relaxed vt.handoff=7
[ 0.068393] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ 0.068793] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.068880] mem auto-init: stack:off, heap alloc:on, heap free:off
[ 0.072101] Calgary: detecting Calgary via BIOS EBDA area
[ 0.072103] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.112338] Memory: 16204984K/16698576K available (14339K kernel code, 2388K rwdata, 4728K rodata, 2668K init, 5056K bss, 493592K reserved, 0K cma-reserved)
[ 0.112465] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.112476] Kernel/User page tables isolation: enabled
[ 0.112491] ftrace: allocating 43225 entries in 169 pages
[ 0.128604] rcu: Hierarchical RCU implementation.
[ 0.128605] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
[ 0.128606] Tasks RCU enabled.
[ 0.128607] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.128607] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.131694] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16
[ 0.131909] random: crng done (trusting CPU's manufacturer)
[ 0.131933] vt handoff: transparent VT on vt#7
[ 0.131939] Console: colour dummy device 80x25
[ 0.131942] printk: console [tty0] enabled
[ 0.131956] ACPI: Core revision 20190703
[ 0.132033] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.132064] APIC: Switch to symmetric I/O mode setup
[ 0.132065] DMAR: Host address width 36
[ 0.132066] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.132072] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[ 0.132073] DMAR: RMRR base: 0x00000080800000 end: 0x000000829fffff
[ 0.132074] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.132076] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[ 0.132078] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.132078] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.132079] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.132484] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.132485] x2apic enabled
[ 0.132492] Switched APIC routing to cluster x2apic.
[ 0.132923] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.152048] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x26d4551df15, max_idle_ns: 440795296693 ns
[ 0.152052] Calibrating delay loop (skipped), value calculated using timer frequency.. 5387.58 BogoMIPS (lpj=10775164)
[ 0.152054] pid_max: default: 32768 minimum: 301
[ 0.153123] LSM: Security Framework initializing
[ 0.153133] Yama: becoming mindful.
[ 0.153172] AppArmor: AppArmor initialized
[ 0.153230] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.153262] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.153420] *** VALIDATE proc ***
[ 0.153468] *** VALIDATE cgroup1 ***
[ 0.153470] *** VALIDATE cgroup2 ***
[ 0.153517] mce: CPU0: Thermal monitoring enabled (TM1)
[ 0.153529] process: using mwait in idle threads
[ 0.153532] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.153532] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.153535] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.153536] Spectre V2 : Mitigation: Full generic retpoline
[ 0.153537] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.153537] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.153538] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.153539] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[ 0.153540] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.153543] MDS: Mitigation: Clear CPU buffers
[ 0.153709] Freeing SMP alternatives memory: 36K
[ 0.155591] TSC deadline timer enabled
[ 0.155595] smpboot: CPU0: Intel(R) Core(TM) i7-3740QM CPU @ 2.70GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[ 0.155707] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.155714] ... version: 3
[ 0.155714] ... bit width: 48
[ 0.155715] ... generic registers: 4
[ 0.155715] ... value mask: 0000ffffffffffff
[ 0.155716] ... max period: 00007fffffffffff
[ 0.155716] ... fixed-purpose events: 3
[ 0.155717] ... event mask: 000000070000000f
[ 0.155750] rcu: Hierarchical SRCU implementation.
[ 0.156050] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.156050] smp: Bringing up secondary CPUs ...
[ 0.156050] x86: Booting SMP configuration:
[ 0.156050] .... node #0, CPUs: #1
[ 0.156146] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[ 0.156201] #2 #3 #4 #5 #6 #7
[ 0.172110] smp: Brought up 1 node, 8 CPUs
[ 0.172110] smpboot: Max logical packages: 1
[ 0.172110] smpboot: Total of 8 processors activated (43100.65 BogoMIPS)
[ 0.174408] devtmpfs: initialized
[ 0.174408] x86/mm: Memory block size: 128MB
[ 0.176662] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.176662] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.176662] pinctrl core: initialized pinctrl subsystem
[ 0.176662] PM: RTC time: 21:10:34, date: 2020-02-03
[ 0.176662] NET: Registered protocol family 16
[ 0.176662] audit: initializing netlink subsys (disabled)
[ 0.176662] audit: type=2000 audit(1580764234.048:1): state=initialized audit_enabled=0 res=1
[ 0.176662] EISA bus registered
[ 0.176662] cpuidle: using governor ladder
[ 0.176662] cpuidle: using governor menu
[ 0.176662] ACPI: bus type PCI registered
[ 0.176662] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.176662] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.176662] PCI: not using MMCONFIG
[ 0.176662] PCI: Using configuration type 1 for base access
[ 0.176662] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.176985] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.180140] ACPI: Added _OSI(Module Device)
[ 0.180140] ACPI: Added _OSI(Processor Device)
[ 0.180141] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.180142] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.180143] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.180144] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.180144] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.183474] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.184541] ACPI: EC: EC started
[ 0.184542] ACPI: EC: interrupt blocked
[ 0.196009] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[ 0.196011] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.196012] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions
[ 0.196013] ACPI: Interpreter enabled
[ 0.196031] ACPI: (supports S0 S3 S4 S5)
[ 0.196032] ACPI: Using IOAPIC for interrupt routing
[ 0.196055] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.197272] [Firmware Info]: PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] not reserved in ACPI motherboard resources
[ 0.197273] PCI: not using MMCONFIG
[ 0.197275] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.197442] ACPI: Enabled 1 GPEs in block 00 to 3F
[ 0.201560] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.201565] acpi PNP0A08:00: _OSC: OS supports [ASPM ClockPM Segments MSI HPX-Type3]
[ 0.201591] acpi PNP0A08:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
[ 0.201602] acpi PNP0A08:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.201869] PCI host bridge to bus 0000:00
[ 0.201871] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.201872] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.201873] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.201874] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.201875] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.201876] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.201876] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.201877] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.201878] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.201879] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.201880] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.201881] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.201882] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.201883] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.201884] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.201885] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[ 0.201886] pci_bus 0000:00: root bus resource [mem 0x82a00001-0xefffffff window]
[ 0.201887] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[ 0.201888] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.201897] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.201992] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[ 0.202026] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.202103] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 0.202114] pci 0000:00:02.0: reg 0x10: [mem 0xe2400000-0xe27fffff 64bit]
[ 0.202119] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.202123] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
[ 0.202135] pci 0000:00:02.0: BAR 2: assigned to efifb
[ 0.202206] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000
[ 0.202215] pci 0000:00:04.0: reg 0x10: [mem 0xe2a20000-0xe2a27fff 64bit]
[ 0.202387] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 0.202596] pci 0000:00:16.0: reg 0x10: [mem 0xe2a32000-0xe2a3200f 64bit]
[ 0.203298] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.203496] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[ 0.203516] pci 0000:00:19.0: reg 0x10: [mem 0xe2a00000-0xe2a1ffff]
[ 0.203524] pci 0000:00:19.0: reg 0x14: [mem 0xe2a2d000-0xe2a2dfff]
[ 0.203532] pci 0000:00:19.0: reg 0x18: [io 0x3040-0x305f]
[ 0.203592] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.203666] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 0.203688] pci 0000:00:1a.0: reg 0x10: [mem 0xe2a2f000-0xe2a2f3ff]
[ 0.203771] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.203863] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 0.203881] pci 0000:00:1b.0: reg 0x10: [mem 0xe2a28000-0xe2a2bfff 64bit]
[ 0.203948] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.204027] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 0.204114] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.204201] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[ 0.204289] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.204374] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
[ 0.204461] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.204547] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[ 0.204631] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.204718] pci 0000:00:1c.6: [8086:1c1c] type 01 class 0x060400
[ 0.204802] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 0.204887] pci 0000:00:1c.7: [8086:1c1e] type 01 class 0x060400
[ 0.204971] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[ 0.205057] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 0.205078] pci 0000:00:1d.0: reg 0x10: [mem 0xe2a30000-0xe2a303ff]
[ 0.205162] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.205248] pci 0000:00:1f.0: [8086:1c4f] type 00 class 0x060100
[ 0.205428] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[ 0.205448] pci 0000:00:1f.2: reg 0x10: [io 0x3088-0x308f]
[ 0.205456] pci 0000:00:1f.2: reg 0x14: [io 0x3098-0x309b]
[ 0.205464] pci 0000:00:1f.2: reg 0x18: [io 0x3090-0x3097]
[ 0.205472] pci 0000:00:1f.2: reg 0x1c: [io 0x309c-0x309f]
[ 0.205480] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
[ 0.205488] pci 0000:00:1f.2: reg 0x24: [mem 0xe2a2e000-0xe2a2e7ff]
[ 0.205533] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.205611] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 0.205630] pci 0000:00:1f.3: reg 0x10: [mem 0xe2a31000-0xe2a310ff 64bit]
[ 0.205650] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.205766] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.205812] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.205884] acpiphp: Slot [1] registered
[ 0.205890] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.205894] pci 0000:00:1c.1: bridge window [io 0x1000-0x1fff]
[ 0.205898] pci 0000:00:1c.1: bridge window [mem 0xe1400000-0xe1bfffff]
[ 0.205904] pci 0000:00:1c.1: bridge window [mem 0xe0c00000-0xe13fffff 64bit pref]
[ 0.205965] acpiphp: Slot [1-1] registered
[ 0.205998] pci 0000:04:00.0: [197b:2380] type 00 class 0x0c0010
[ 0.206040] pci 0000:04:00.0: reg 0x10: [mem 0xe0810000-0xe08107ff]
[ 0.206063] pci 0000:04:00.0: reg 0x14: [mem 0xe0811000-0xe08110ff]
[ 0.206371] pci 0000:04:00.1: [197b:2392] type 00 class 0x088000
[ 0.206407] pci 0000:04:00.1: reg 0x10: [mem 0xe0812000-0xe08120ff]
[ 0.206520] pci 0000:04:00.1: reg 0x30: [mem 0xe0800000-0xe080ffff pref]
[ 0.206694] pci 0000:04:00.2: [197b:2391] type 00 class 0x080501
[ 0.206729] pci 0000:04:00.2: reg 0x10: [mem 0xe0813000-0xe08130ff]
[ 0.207018] pci 0000:04:00.3: [197b:2393] type 00 class 0x088000
[ 0.207054] pci 0000:04:00.3: reg 0x10: [mem 0xe0814000-0xe08140ff]
[ 0.207338] pci 0000:04:00.4: [197b:2394] type 00 class 0x088000
[ 0.207374] pci 0000:04:00.4: reg 0x10: [mem 0xe0815000-0xe08150ff]
[ 0.207705] pci 0000:00:1c.2: PCI bridge to [bus 04]
[ 0.207708] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.207712] pci 0000:00:1c.2: bridge window [mem 0xe0000000-0xe08fffff]
[ 0.207718] pci 0000:00:1c.2: bridge window [mem 0xe1c00000-0xe23fffff 64bit pref]
[ 0.207794] pci 0000:05:00.0: [168c:002b] type 00 class 0x028000
[ 0.207852] pci 0000:05:00.0: reg 0x10: [mem 0xe2800000-0xe280ffff 64bit]
[ 0.208089] pci 0000:05:00.0: supports D1
[ 0.208091] pci 0000:05:00.0: PME# supported from D0 D1 D3hot D3cold
[ 0.208219] pci 0000:00:1c.3: PCI bridge to [bus 05]
[ 0.208225] pci 0000:00:1c.3: bridge window [mem 0xe2800000-0xe28fffff]
[ 0.208268] pci 0000:00:1c.6: PCI bridge to [bus 06]
[ 0.208352] pci 0000:07:00.0: [1033:0194] type 00 class 0x0c0330
[ 0.208407] pci 0000:07:00.0: reg 0x10: [mem 0xe2900000-0xe2901fff 64bit]
[ 0.208670] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
[ 0.208798] pci 0000:00:1c.7: PCI bridge to [bus 07]
[ 0.208803] pci 0000:00:1c.7: bridge window [mem 0xe2900000-0xe29fffff]
[ 0.209051] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.209118] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.209183] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.209245] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.209308] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.209372] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.209435] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.209499] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.212108] ACPI: EC: interrupt unblocked
[ 0.212117] ACPI: EC: event unblocked
[ 0.212124] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.212125] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions and events
[ 0.212218] SCSI subsystem initialized
[ 0.212233] libata version 3.00 loaded.
[ 0.212233] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.212233] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.212233] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.212233] vgaarb: loaded
[ 0.212233] ACPI: bus type USB registered
[ 0.212233] usbcore: registered new interface driver usbfs
[ 0.212233] usbcore: registered new interface driver hub
[ 0.212233] usbcore: registered new device driver usb
[ 0.212233] pps_core: LinuxPPS API ver. 1 registered
[ 0.212233] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.212233] PTP clock support registered
[ 0.212233] EDAC MC: Ver: 3.0.0
[ 0.212233] Registered efivars operations
[ 0.212233] PCI: Using ACPI for IRQ routing
[ 0.212233] PCI: pci_cache_line_size set to 64 bytes
[ 0.212233] e820: reserve RAM buffer [mem 0x7faae000-0x7fffffff]
[ 0.212233] e820: reserve RAM buffer [mem 0x7fbfd000-0x7fffffff]
[ 0.212233] e820: reserve RAM buffer [mem 0x7feda000-0x7fffffff]
[ 0.212233] e820: reserve RAM buffer [mem 0x47b600000-0x47bffffff]
[ 0.212292] NetLabel: Initializing
[ 0.212293] NetLabel: domain hash size = 128
[ 0.212293] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.212308] NetLabel: unlabeled traffic allowed by default
[ 0.212648] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.212652] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.216057] clocksource: Switched to clocksource tsc-early
[ 0.228040] VFS: Disk quotas dquot_6.6.0
[ 0.228062] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.228089] *** VALIDATE hugetlbfs ***
[ 0.228172] AppArmor: AppArmor Filesystem Enabled
[ 0.228198] pnp: PnP ACPI init
[ 0.228423] pnp 00:00: [Firmware Bug]: PNP resource [mem 0xf0000000-0x12fffffff] covers only part of 0000:00:00.0 Intel MCH; extending to [mem 0xfed10000-0xfed17fff]
[ 0.228446] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.228447] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.228448] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.228449] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.228450] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.228451] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.228453] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.228454] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.228455] system 00:00: [mem 0x20000000-0x201fffff] could not be reserved
[ 0.228457] system 00:00: [mem 0x40000000-0x401fffff] could not be reserved
[ 0.228462] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.228890] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.228894] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.228933] system 00:02: [io 0x0500-0x057f] has been reserved
[ 0.228935] system 00:02: [io 0x0480-0x04bf] has been reserved
[ 0.228938] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.228956] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.228992] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.229019] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.229044] pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active)
[ 0.229066] pnp: PnP ACPI: found 7 devices
[ 0.230269] thermal_sys: Registered thermal governor 'fair_share'
[ 0.230270] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.230270] thermal_sys: Registered thermal governor 'step_wise'
[ 0.230271] thermal_sys: Registered thermal governor 'user_space'
[ 0.230272] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.234768] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.234807] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.234813] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.234824] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.234826] pci 0000:00:1c.1: bridge window [io 0x1000-0x1fff]
[ 0.234831] pci 0000:00:1c.1: bridge window [mem 0xe1400000-0xe1bfffff]
[ 0.234835] pci 0000:00:1c.1: bridge window [mem 0xe0c00000-0xe13fffff 64bit pref]
[ 0.234841] pci 0000:00:1c.2: PCI bridge to [bus 04]
[ 0.234844] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.234848] pci 0000:00:1c.2: bridge window [mem 0xe0000000-0xe08fffff]
[ 0.234852] pci 0000:00:1c.2: bridge window [mem 0xe1c00000-0xe23fffff 64bit pref]
[ 0.234858] pci 0000:00:1c.3: PCI bridge to [bus 05]
[ 0.234862] pci 0000:00:1c.3: bridge window [mem 0xe2800000-0xe28fffff]
[ 0.234870] pci 0000:00:1c.6: PCI bridge to [bus 06]
[ 0.234881] pci 0000:00:1c.7: PCI bridge to [bus 07]
[ 0.234886] pci 0000:00:1c.7: bridge window [mem 0xe2900000-0xe29fffff]
[ 0.234894] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.234895] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.234896] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.234897] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.234898] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.234899] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.234900] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.234901] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.234902] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.234903] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.234904] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.234905] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[ 0.234906] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[ 0.234907] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[ 0.234908] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[ 0.234909] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
[ 0.234910] pci_bus 0000:00: resource 20 [mem 0x82a00001-0xefffffff window]
[ 0.234911] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff window]
[ 0.234912] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
[ 0.234913] pci_bus 0000:03: resource 1 [mem 0xe1400000-0xe1bfffff]
[ 0.234914] pci_bus 0000:03: resource 2 [mem 0xe0c00000-0xe13fffff 64bit pref]
[ 0.234915] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff]
[ 0.234916] pci_bus 0000:04: resource 1 [mem 0xe0000000-0xe08fffff]
[ 0.234917] pci_bus 0000:04: resource 2 [mem 0xe1c00000-0xe23fffff 64bit pref]
[ 0.234918] pci_bus 0000:05: resource 1 [mem 0xe2800000-0xe28fffff]
[ 0.234919] pci_bus 0000:07: resource 1 [mem 0xe2900000-0xe29fffff]
[ 0.235006] NET: Registered protocol family 2
[ 0.235133] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 0.235211] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.235422] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.235506] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.235549] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.235591] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.235685] NET: Registered protocol family 1
[ 0.235689] NET: Registered protocol family 44
[ 0.235699] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.236941] PCI: CLS 64 bytes, default 64
[ 0.236978] Trying to unpack rootfs image as initramfs...
[ 0.421134] Freeing initrd memory: 78940K
[ 0.444088] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.444091] software IO TLB: mapped [mem 0x77ed0000-0x7bed0000] (64MB)
[ 0.444374] check: Scanning for low memory corruption every 60 seconds
[ 0.446332] Initialise system trusted keyrings
[ 0.446339] Key type blacklist registered
[ 0.446368] workingset: timestamp_bits=36 max_order=22 bucket_order=0
[ 0.447595] zbud: loaded
[ 0.447936] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.448081] fuse: init (API version 7.31)
[ 0.448188] Platform Keyring initialized
[ 0.453201] Key type asymmetric registered
[ 0.453202] Asymmetric key parser 'x509' registered
[ 0.453209] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[ 0.453244] io scheduler mq-deadline registered
[ 0.454552] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.454609] efifb: probing for efifb
[ 0.454628] efifb: showing boot graphics
[ 0.455423] efifb: framebuffer at 0xd0000000, using 5632k, total 5632k
[ 0.455424] efifb: mode is 1600x900x32, linelength=6400, pages=1
[ 0.455424] efifb: scrolling: redraw
[ 0.455425] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.455464] fbcon: Deferring console take-over
[ 0.455464] fb0: EFI VGA frame buffer device
[ 0.455472] intel_idle: MWAIT substates: 0x21120
[ 0.455473] intel_idle: v0.4.1 model 0x3A
[ 0.455798] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.459396] ACPI: AC Adapter [AC] (on-line)
[ 0.459456] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2a/PNP0C09:00/PNP0C0D:00/input/input0
[ 0.459462] ACPI: Lid Switch [LID]
[ 0.459492] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.459507] ACPI: Power Button [PWRF]
[ 0.461050] battery: ACPI: Battery Slot [BAT0] (battery absent)
[ 0.461057] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.461133] battery: ACPI: Battery Slot [BAT1] (battery absent)
[ 0.481900] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.483563] Linux agpgart interface v0.103
[ 0.524135] tpm_tis 00:06: 1.2 TPM (device-id 0xB, rev-id 16)
[ 0.994826] loop: module loaded
[ 0.995004] libphy: Fixed MDIO Bus: probed
[ 0.995004] tun: Universal TUN/TAP device driver, 1.6
[ 0.995031] PPP generic driver version 2.4.2
[ 0.995064] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.995068] ehci-pci: EHCI PCI platform driver
[ 0.995209] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.995215] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.995226] ehci-pci 0000:00:1a.0: debug port 2
[ 0.999126] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.999142] ehci-pci 0000:00:1a.0: irq 19, io mem 0xe2a2f000
[ 1.012088] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.012162] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
[ 1.012164] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.012165] usb usb1: Product: EHCI Host Controller
[ 1.012166] usb usb1: Manufacturer: Linux 5.3.0-29-generic ehci_hcd
[ 1.012167] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.012368] hub 1-0:1.0: USB hub found
[ 1.012376] hub 1-0:1.0: 3 ports detected
[ 1.012599] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.012603] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.012614] ehci-pci 0000:00:1d.0: debug port 2
[ 1.016522] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.016533] ehci-pci 0000:00:1d.0: irq 18, io mem 0xe2a30000
[ 1.032096] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.032152] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
[ 1.032154] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.032155] usb usb2: Product: EHCI Host Controller
[ 1.032156] usb usb2: Manufacturer: Linux 5.3.0-29-generic ehci_hcd
[ 1.032157] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.032342] hub 2-0:1.0: USB hub found
[ 1.032350] hub 2-0:1.0: 3 ports detected
[ 1.032455] ehci-platform: EHCI generic platform driver
[ 1.032462] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.032466] ohci-pci: OHCI PCI platform driver
[ 1.032474] ohci-platform: OHCI generic platform driver
[ 1.032479] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.032836] xhci_hcd 0000:07:00.0: xHCI Host Controller
[ 1.032840] xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 3
[ 1.032994] xhci_hcd 0000:07:00.0: hcc params 0x014042c3 hci version 0x96 quirks 0x0000000000000004
[ 1.033336] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
[ 1.033337] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.033338] usb usb3: Product: xHCI Host Controller
[ 1.033339] usb usb3: Manufacturer: Linux 5.3.0-29-generic xhci-hcd
[ 1.033340] usb usb3: SerialNumber: 0000:07:00.0
[ 1.033516] hub 3-0:1.0: USB hub found
[ 1.033532] hub 3-0:1.0: 2 ports detected
[ 1.033643] xhci_hcd 0000:07:00.0: xHCI Host Controller
[ 1.033646] xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 4
[ 1.033648] xhci_hcd 0000:07:00.0: Host supports USB 3.0 SuperSpeed
[ 1.036433] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.036452] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.03
[ 1.036453] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.036454] usb usb4: Product: xHCI Host Controller
[ 1.036454] usb usb4: Manufacturer: Linux 5.3.0-29-generic xhci-hcd
[ 1.036455] usb usb4: SerialNumber: 0000:07:00.0
[ 1.036634] hub 4-0:1.0: USB hub found
[ 1.036648] hub 4-0:1.0: 2 ports detected
[ 1.036777] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.038656] i8042: Detected active multiplexing controller, rev 1.1
[ 1.039362] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.039366] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.039388] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.039406] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.039422] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.039718] mousedev: PS/2 mouse device common for all mice
[ 1.039845] rtc_cmos 00:03: RTC can wake from S4
[ 1.039976] rtc_cmos 00:03: registered as rtc0
[ 1.039994] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.040000] i2c /dev entries driver
[ 1.040033] device-mapper: uevent: version 1.0.3
[ 1.040093] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com
[ 1.040112] platform eisa.0: Probing EISA bus 0
[ 1.040114] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 1.040115] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 1.040116] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 1.040117] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 1.040118] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 1.040118] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 1.040119] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 1.040120] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 1.040121] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 1.040122] platform eisa.0: EISA: Detected 0 cards
[ 1.040127] intel_pstate: Intel P-state driver initializing
[ 1.040685] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.040687] EFI Variables Facility v0.08 2004-May-17
[ 1.041071] NET: Registered protocol family 10
[ 1.047732] Segment Routing with IPv6
[ 1.047748] NET: Registered protocol family 17
[ 1.047791] Key type dns_resolver registered
[ 1.048142] RAS: Correctable Errors collector initialized.
[ 1.048188] microcode: sig=0x306a9, pf=0x10, revision=0x21
[ 1.048257] microcode: Microcode Update Driver: v2.2.
[ 1.048265] sched_clock: Marking stable (1052083375, -3828933)->(1056237974, -7983532)
[ 1.048430] registered taskstats version 1
[ 1.048437] Loading compiled-in X.509 certificates
[ 1.050107] Loaded X.509 cert 'Build time autogenerated kernel key: e010219b5d6ca0f28448e71ca03baad031d32c9b'
[ 1.050134] zswap: loaded using pool lzo/zbud
[ 1.056798] Key type big_key registered
[ 1.056801] Key type trusted registered
[ 1.060248] Key type encrypted registered
[ 1.060251] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.060521] ima: Allocated hash algorithm: sha1
[ 1.063646] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 1.235220] No architecture policies found
[ 1.235250] evm: Initialising EVM extended attributes:
[ 1.235251] evm: security.selinux
[ 1.235251] evm: security.SMACK64
[ 1.235252] evm: security.SMACK64EXEC
[ 1.235252] evm: security.SMACK64TRANSMUTE
[ 1.235252] evm: security.SMACK64MMAP
[ 1.235253] evm: security.apparmor
[ 1.235253] evm: security.ima
[ 1.235253] evm: security.capability
[ 1.235254] evm: HMAC attrs: 0x1
[ 1.235709] PM: Magic number: 8:45:196
[ 1.235845] rtc_cmos 00:03: setting system clock to 2020-02-03T21:10:35 UTC (1580764235)
[ 1.236923] Freeing unused decrypted memory: 2040K
[ 1.237301] Freeing unused kernel image memory: 2668K
[ 1.237367] Write protecting the kernel read-only data: 22528k
[ 1.237875] Freeing unused kernel image memory: 2008K
[ 1.238169] Freeing unused kernel image memory: 1416K
[ 1.245776] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.245776] x86/mm: Checking user space page tables
[ 1.253043] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.253044] Run /init as init process
[ 1.318372] sdhci: Secure Digital Host Controller Interface driver
[ 1.318373] sdhci: Copyright(c) Pierre Ossman
[ 1.318962] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20190703/utaddress-204)
[ 1.318967] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.318970] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20190703/utaddress-204)
[ 1.318974] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.318975] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20190703/utaddress-204)
[ 1.318978] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.318979] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20190703/utaddress-204)
[ 1.318982] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.318982] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 1.319679] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 1.319680] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.319899] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 1.320874] ahci 0000:00:1f.2: version 3.0
[ 1.321109] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 1.321146] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3b impl SATA mode
[ 1.321149] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst
[ 1.322392] sdhci-pci 0000:04:00.1: SDHCI controller found [197b:2392] (rev 30)
[ 1.322885] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes
[ 1.326304] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 1.330098] cryptd: max_cpu_qlen set to 1000
[ 1.331042] mmc0: SDHCI controller on PCI [0000:04:00.1] using DMA
[ 1.331065] sdhci-pci 0000:04:00.2: SDHCI controller found [197b:2391] (rev 30)
[ 1.331473] sdhci-pci 0000:04:00.2: Refusing to bind to secondary interface.
[ 1.331668] scsi host0: ahci
[ 1.333993] scsi host1: ahci
[ 1.334295] scsi host2: ahci
[ 1.334635] scsi host3: ahci
[ 1.342318] AVX version of gcm_enc/dec engaged.
[ 1.342319] AES CTR mode by8 optimization enabled
[ 1.351492] scsi host4: ahci
[ 1.351590] scsi host5: ahci
[ 1.351636] ata1: SATA max UDMA/133 abar m2048@0xe2a2e000 port 0xe2a2e100 irq 42
[ 1.351638] ata2: SATA max UDMA/133 abar m2048@0xe2a2e000 port 0xe2a2e180 irq 42
[ 1.351638] ata3: DUMMY
[ 1.351641] ata4: SATA max UDMA/133 abar m2048@0xe2a2e000 port 0xe2a2e280 irq 42
[ 1.351643] ata5: SATA max UDMA/133 abar m2048@0xe2a2e000 port 0xe2a2e300 irq 42
[ 1.351645] ata6: SATA max UDMA/133 abar m2048@0xe2a2e000 port 0xe2a2e380 irq 42
[ 1.352714] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.359449] checking generic (d0000000 580000) vs hw (d0000000 10000000)
[ 1.359451] fb0: switching to inteldrmfb from EFI VGA
[ 1.359512] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 1.372101] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.408125] firewire_ohci 0000:04:00.0: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x10
[ 1.410632] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.410633] [drm] Driver supports precise vblank timestamp query.
[ 1.411200] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.430051] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[ 1.438789] [drm] Initialized i915 1.6.0 20190619 for 0000:00:02.0 on minor 0
[ 1.438915] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.464947] acpi device:0d: registered as cooling_device8
[ 1.464990] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
[ 1.476061] tsc: Refined TSC clocksource calibration: 2693.884 MHz
[ 1.476067] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x26d4acba1c8, max_idle_ns: 440795203559 ns
[ 1.481990] clocksource: Switched to clocksource tsc
[ 1.485696] fbcon: i915drmfb (fb0) is primary device
[ 1.485696] fbcon: Deferring console take-over
[ 1.485698] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
[ 1.508507] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 1.508508] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.508757] hub 1-1:1.0: USB hub found
[ 1.508895] hub 1-1:1.0: 6 ports detected
[ 1.533873] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 1.533875] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.534166] hub 2-1:1.0: USB hub found
[ 1.534454] hub 2-1:1.0: 8 ports detected
[ 1.535752] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 10:1f:74:fe:c4:de
[ 1.535753] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 1.535787] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
[ 1.536713] e1000e 0000:00:19.0 eno0: renamed from eth0
[ 1.666633] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.668272] ata1.00: supports DRM functions and may not be fully accessible
[ 1.669088] ata1.00: disabling queued TRIM support
[ 1.669092] ata1.00: ATA-9: Samsung SSD 850 PRO 256GB, EXM04B6Q, max UDMA/133
[ 1.669095] ata1.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 1.671067] ata1.00: supports DRM functions and may not be fully accessible
[ 1.671762] ata1.00: disabling queued TRIM support
[ 1.673335] ata1.00: configured for UDMA/133
[ 1.683781] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 850 4B6Q PQ: 0 ANSI: 5
[ 1.684059] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.684087] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[ 1.684093] sd 0:0:0:0: [sda] Write Protect is off
[ 1.684094] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.684104] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.685289] sda: sda1 sda2 sda3
[ 1.686345] sd 0:0:0:0: [sda] supports TCG Opal
[ 1.686346] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.796153] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
[ 1.824129] usb 2-1.4: new high-speed USB device number 3 using ehci-pci
[ 1.876119] usb 1-1.1: device descriptor read/64, error -32
[ 1.920287] firewire_core 0000:04:00.0: created device fw0: GUID ffe473fffffffffe, S400
[ 1.999681] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.064151] usb 1-1.1: device descriptor read/64, error -32
[ 2.066761] usb 2-1.4: New USB device found, idVendor=1bcf, idProduct=2805, bcdDevice=20.15
[ 2.066763] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.066764] usb 2-1.4: Product: HP HD Webcam [Fixed]
[ 2.066765] usb 2-1.4: Manufacturer: 6047B0021701A0117K1KB
[ 2.252130] usb 1-1.1: new full-speed USB device number 4 using ehci-pci
[ 2.305578] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input7
[ 2.315258] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.332143] usb 1-1.1: device descriptor read/64, error -32
[ 2.520152] usb 1-1.1: device descriptor read/64, error -32
[ 2.628277] usb 1-1-port1: attempt power cycle
[ 2.631901] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.947478] ata6: SATA link down (SStatus 0 SControl 300)
[ 3.137760] psmouse serio4: synaptics: queried max coordinates: x [..5728], y [..4916]
[ 3.210866] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x640000/0xa0400/0x0, board id: 1623, fw id: 790122
[ 3.236139] usb 1-1.1: new full-speed USB device number 5 using ehci-pci
[ 3.257830] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input11
[ 3.652148] usb 1-1.1: device not accepting address 5, error -32
[ 3.732078] usb 1-1.1: new full-speed USB device number 6 using ehci-pci
[ 4.152152] usb 1-1.1: device not accepting address 6, error -32
[ 4.152367] usb 1-1-port1: unable to enumerate USB device
[ 14.977907] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[ 15.114637] systemd[1]: Inserted module 'autofs4'
[ 15.127280] systemd[1]: systemd 242 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 15.148288] systemd[1]: Detected architecture x86-64.
[ 15.150130] systemd[1]: Set hostname to <pc>.
[ 15.150727] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument
[ 15.214161] systemd[1]: /lib/systemd/system/dbus.socket:4: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
[ 15.261156] systemd[1]: Reached target Remote File Systems.
[ 15.261876] systemd[1]: Created slice system-systemd\x2dcryptsetup.slice.
[ 15.262027] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 15.262101] systemd[1]: Listening on Syslog Socket.
[ 15.262148] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 15.277648] lp: driver loaded but no devices found
[ 15.281542] ppdev: user-space parallel port driver
[ 15.284335] parport0: PC-style at 0x378 [PCSPP,EPP]
[ 15.289854] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro
[ 15.291280] bpfilter: Loaded bpfilter_umh pid 612
[ 15.388227] lp0: using parport0 (polling).
[ 15.641815] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 15.645574] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 15.645575] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 15.645576] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 15.645577] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ 15.646077] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 15.695043] systemd-journald[602]: Received request to flush runtime journal from PID 1
[ 15.738084] mc: Linux media interface: v0.10
[ 15.747191] videodev: Linux video capture interface: v2.00
[ 15.768642] uvcvideo: Found UVC 1.00 device HP HD Webcam [Fixed] (1bcf:2805)
[ 15.780584] ath: phy0: Enable LNA combining
[ 15.783466] ath: phy0: ASPM enabled: 0x43
[ 15.783469] ath: EEPROM regdomain: 0x60
[ 15.783469] ath: EEPROM indicates we should expect a direct regpair map
[ 15.783471] ath: Country alpha2 being used: 00
[ 15.783472] ath: Regpair used: 0x60
[ 15.785638] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 15.785956] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffadac80a50000, irq=19
[ 15.808264] uvcvideo 2-1.4:1.0: Entity type for entity Extension 4 was not initialized!
[ 15.808266] uvcvideo 2-1.4:1.0: Entity type for entity Extension 3 was not initialized!
[ 15.808268] uvcvideo 2-1.4:1.0: Entity type for entity Processing 2 was not initialized!
[ 15.808269] uvcvideo 2-1.4:1.0: Entity type for entity Camera 1 was not initialized!
[ 15.808345] input: HP HD Webcam [Fixed]: HP HD Web as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input12
[ 15.808419] usbcore: registered new interface driver uvcvideo
[ 15.808422] USB Video Class driver (1.1.1)
[ 15.821168] intel_rapl_common: Found RAPL domain package
[ 15.821170] intel_rapl_common: Found RAPL domain core
[ 15.821170] intel_rapl_common: Found RAPL domain uncore
[ 15.840736] ath9k 0000:05:00.0 wlp5s0: renamed from wlan0
[ 15.849954] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 15.869391] snd_hda_codec_idt hdaudioC0D0: autoconfig for 92HD81B1X5: line_outs=1 (0xa/0x0/0x0/0x0/0x0) type:line
[ 15.869393] snd_hda_codec_idt hdaudioC0D0: speaker_outs=1 (0xd/0x0/0x0/0x0/0x0)
[ 15.869394] snd_hda_codec_idt hdaudioC0D0: hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
[ 15.869394] snd_hda_codec_idt hdaudioC0D0: mono: mono_out=0x0
[ 15.869395] snd_hda_codec_idt hdaudioC0D0: inputs:
[ 15.869396] snd_hda_codec_idt hdaudioC0D0: Mic=0xc
[ 15.869397] snd_hda_codec_idt hdaudioC0D0: Internal Mic=0x11
[ 15.869398] snd_hda_codec_idt hdaudioC0D0: Line=0xf
[ 15.913756] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 15.913796] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 15.913830] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 15.913863] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 15.913896] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 15.913934] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[ 15.913996] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
[ 16.224118] Adding 999420k swap on /dev/mapper/vgubuntu-swap_1. Priority:-2 extents:1 across:999420k SSFS
[ 16.238643] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 16.271005] audit: type=1400 audit(1580764250.530:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=1068 comm="apparmor_parser"
[ 16.271125] audit: type=1400 audit(1580764250.530:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=1071 comm="apparmor_parser"
[ 16.271331] audit: type=1400 audit(1580764250.530:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=1062 comm="apparmor_parser"
[ 16.271335] audit: type=1400 audit(1580764250.530:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=1062 comm="apparmor_parser"
[ 16.271602] audit: type=1400 audit(1580764250.530:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=1067 comm="apparmor_parser"
[ 16.272020] audit: type=1400 audit(1580764250.530:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=1065 comm="apparmor_parser"
[ 16.272025] audit: type=1400 audit(1580764250.530:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=1065 comm="apparmor_parser"
[ 16.272176] audit: type=1400 audit(1580764250.534:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1066 comm="apparmor_parser"
[ 16.272180] audit: type=1400 audit(1580764250.534:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1066 comm="apparmor_parser"
[ 16.272182] audit: type=1400 audit(1580764250.534:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1066 comm="apparmor_parser"
[ 17.664068] mei_me 0000:00:16.0: wait hw ready failed
[ 17.664072] mei_me 0000:00:16.0: hw_start failed ret = -62
[ 17.664110] mei_me 0000:00:16.0: H_RST is set = 0x80000015
[ 18.421318] wlp5s0: authenticate with 48:f8:b3:24:62:cd
[ 18.435712] wlp5s0: send auth to 48:f8:b3:24:62:cd (try 1/3)
[ 18.437464] wlp5s0: authenticated
[ 18.440093] wlp5s0: associate with 48:f8:b3:24:62:cd (try 1/3)
[ 18.443515] wlp5s0: RX AssocResp from 48:f8:b3:24:62:cd (capab=0x411 status=0 aid=3)
[ 18.443714] wlp5s0: associated
[ 18.478529] IPv6: ADDRCONF(NETDEV_CHANGE): wlp5s0: link becomes ready
[ 19.680077] mei_me 0000:00:16.0: wait hw ready failed
[ 19.680083] mei_me 0000:00:16.0: hw_start failed ret = -62
[ 19.680118] mei_me 0000:00:16.0: H_RST is set = 0x80000015
[ 19.887259] rfkill: input handler disabled
[ 21.696066] mei_me 0000:00:16.0: wait hw ready failed
[ 21.696071] mei_me 0000:00:16.0: hw_start failed ret = -62
[ 21.696082] mei_me 0000:00:16.0: reset: reached maximal consecutive resets: disabling the device
[ 21.696083] mei_me 0000:00:16.0: reset failed ret = -19
[ 21.696084] mei_me 0000:00:16.0: link layer initialization failed.
[ 21.696085] mei_me 0000:00:16.0: init hw failure.
[ 21.696204] mei_me 0000:00:16.0: initialization failed.
[ 23.266693] vboxdrv: loading out-of-tree module taints kernel.
[ 23.266892] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[ 23.274452] vboxdrv: Found 8 processor cores
[ 23.292315] vboxdrv: TSC mode is Invariant, tentative frequency 2693877905 Hz
[ 23.292316] vboxdrv: Successfully loaded version 6.0.14_Ubuntu (interface 0x00290008)
[ 23.299520] VBoxNetFlt: Successfully started.
[ 23.305163] VBoxNetAdp: Successfully started.
[ 23.312183] VBoxPciLinuxInit
[ 23.316349] vboxpci: IOMMU not found (not registered)
[ 305.049218] nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based firewall rule not found. Use the iptables CT target to attach helpers instead.