| [ 0.000000] Linux version 4.14.0-2-amd64 (debian-kernel@lists.debian.org) (gcc version 7.2.0 (Debian 7.2.0-18)) #1 SMP Debian 4.14.7-1 (2017-12-22) |
| [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.14.0-2-amd64 root=UUID=a994a1c5-a911-48bd-a468-4aa6a9728001 ro module.sig_enforce=1 quiet iomem=relaxed |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' |
| [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' |
| [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 |
| [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. |
| [ 0.000000] e820: BIOS-provided physical RAM map: |
| [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007feeefff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000007feef000-0x000000008e9fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000003715fffff] usable |
| [ 0.000000] NX (Execute Disable) protection: active |
| [ 0.000000] random: fast init done |
| [ 0.000000] SMBIOS 2.7 present. |
| [ 0.000000] DMI: HP EliteBook Revolve 810 G1/EliteBook Revolve 810 G1, BIOS 4.6-2553-g1291c44abd-dirty 01/12/2018 |
| [ 0.000000] tsc: Fast TSC calibration using PIT |
| [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable |
| [ 0.000000] e820: last_pfn = 0x371600 max_arch_pfn = 0x400000000 |
| [ 0.000000] MTRR default type: write-back |
| [ 0.000000] MTRR fixed ranges enabled: |
| [ 0.000000] 00000-9FFFF write-back |
| [ 0.000000] A0000-BFFFF uncachable |
| [ 0.000000] C0000-FFFFF write-back |
| [ 0.000000] MTRR variable ranges enabled: |
| [ 0.000000] 0 base 080000000 mask FC0000000 uncachable |
| [ 0.000000] 1 base 0C0000000 mask FE0000000 uncachable |
| [ 0.000000] 2 base 0E0000000 mask FF0000000 write-combining |
| [ 0.000000] 3 base 0F0000000 mask FF0000000 uncachable |
| [ 0.000000] 4 disabled |
| [ 0.000000] 5 disabled |
| [ 0.000000] 6 disabled |
| [ 0.000000] 7 disabled |
| [ 0.000000] 8 disabled |
| [ 0.000000] 9 disabled |
| [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT |
| [ 0.000000] e820: last_pfn = 0x7feef max_arch_pfn = 0x400000000 |
| [ 0.000000] Base memory trampoline at [ffff929b80099000] 99000 size 24576 |
| [ 0.000000] BRK [0x23d956000, 0x23d956fff] PGTABLE |
| [ 0.000000] BRK [0x23d957000, 0x23d957fff] PGTABLE |
| [ 0.000000] BRK [0x23d958000, 0x23d958fff] PGTABLE |
| [ 0.000000] BRK [0x23d959000, 0x23d959fff] PGTABLE |
| [ 0.000000] BRK [0x23d95a000, 0x23d95afff] PGTABLE |
| [ 0.000000] BRK [0x23d95b000, 0x23d95bfff] PGTABLE |
| [ 0.000000] BRK [0x23d95c000, 0x23d95cfff] PGTABLE |
| [ 0.000000] RAMDISK: [mem 0x35427000-0x36a0afff] |
| [ 0.000000] ACPI: Early table checksum verification disabled |
| [ 0.000000] ACPI: RSDP 0x00000000000F66B0 000024 (v02 CORE ) |
| [ 0.000000] ACPI: XSDT 0x000000007FF130E0 00005C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: FACP 0x000000007FF165E0 0000F4 (v04 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: DSDT 0x000000007FF13280 00335D (v03 COREv4 COREBOOT 20141018 INTL 20161222) |
| [ 0.000000] ACPI: FACS 0x000000007FF13240 000040 |
| [ 0.000000] ACPI: FACS 0x000000007FF13240 000040 |
| [ 0.000000] ACPI: SSDT 0x000000007FF166E0 001995 (v02 CORE COREBOOT 0000002A CORE 0000002A) |
| [ 0.000000] ACPI: MCFG 0x000000007FF18080 00003C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: TCPA 0x000000007FF180C0 000032 (v02 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: APIC 0x000000007FF18100 00006C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: DMAR 0x000000007FF18170 0000A8 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: HPET 0x000000007FF18220 000038 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] No NUMA configuration found |
| [ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000003715fffff] |
| [ 0.000000] NODE_DATA(0) allocated [mem 0x3715f2000-0x3715f6fff] |
| [ 0.000000] Zone ranges: |
| [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] |
| [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] |
| [ 0.000000] Normal [mem 0x0000000100000000-0x00000003715fffff] |
| [ 0.000000] Device empty |
| [ 0.000000] Movable zone start for each node |
| [ 0.000000] Early memory node ranges |
| [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] |
| [ 0.000000] node 0: [mem 0x0000000000100000-0x000000007feeefff] |
| [ 0.000000] node 0: [mem 0x0000000100000000-0x00000003715fffff] |
| [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000003715fffff] |
| [ 0.000000] On node 0 totalpages: 3085453 |
| [ 0.000000] DMA zone: 64 pages used for memmap |
| [ 0.000000] DMA zone: 21 pages reserved |
| [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 |
| [ 0.000000] DMA32 zone: 8124 pages used for memmap |
| [ 0.000000] DMA32 zone: 519919 pages, LIFO batch:31 |
| [ 0.000000] Normal zone: 40024 pages used for memmap |
| [ 0.000000] Normal zone: 2561536 pages, LIFO batch:31 |
| [ 0.000000] Reserving Intel graphics memory at 0x0000000080a00000-0x000000008e9fffff |
| [ 0.000000] ACPI: PM-Timer IO Port: 0x508 |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) |
| [ 0.000000] ACPI: IRQ0 used by override. |
| [ 0.000000] ACPI: IRQ9 used by override. |
| [ 0.000000] Using ACPI (MADT) for SMP configuration information |
| [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 |
| [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs |
| [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x7feef000-0x8e9fffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x8ea00000-0xf7ffffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfed3ffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed8ffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfed91fff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xfed92000-0xffffffff] |
| [ 0.000000] e820: [mem 0x8ea00000-0xf7ffffff] available for PCI devices |
| [ 0.000000] Booting paravirtualized kernel on bare hardware |
| [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns |
| [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 |
| [ 0.000000] percpu: Embedded 38 pages/cpu @ffff929ef1200000 s115288 r8192 d32168 u524288 |
| [ 0.000000] pcpu-alloc: s115288 r8192 d32168 u524288 alloc=1*2097152 |
| [ 0.000000] pcpu-alloc: [0] 0 1 2 3 |
| [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 3037220 |
| [ 0.000000] Policy zone: Normal |
| [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.14.0-2-amd64 root=UUID=a994a1c5-a911-48bd-a468-4aa6a9728001 ro module.sig_enforce=1 quiet iomem=relaxed |
| [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) |
| [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area |
| [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! |
| [ 0.000000] Memory: 12042324K/12341812K available (6907K kernel code, 1139K rwdata, 3036K rodata, 1484K init, 696K bss, 299488K reserved, 0K cma-reserved) |
| [ 0.000000] ftrace: allocating 28989 entries in 114 pages |
| [ 0.000000] Hierarchical RCU implementation. |
| [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4. |
| [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 |
| [ 0.000000] NR_IRQS: 33024, nr_irqs: 456, preallocated irqs: 16 |
| [ 0.000000] Console: colour VGA+ 80x25 |
| [ 0.000000] console [tty0] enabled |
| [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns |
| [ 0.000000] hpet clockevent registered |
| [ 0.000000] tsc: Fast TSC calibration using PIT |
| [ 0.004000] tsc: Detected 1895.695 MHz processor |
| [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3791.39 BogoMIPS (lpj=7582780) |
| [ 0.004000] pid_max: default: 32768 minimum: 301 |
| [ 0.004000] ACPI: Core revision 20170728 |
| [ 0.010646] ACPI: 2 ACPI AML tables successfully acquired and loaded |
| [ 0.010715] Security Framework initialized |
| [ 0.010717] Yama: disabled by default; enable with sysctl kernel.yama.* |
| [ 0.010736] AppArmor: AppArmor initialized |
| [ 0.013673] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) |
| [ 0.015151] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) |
| [ 0.015217] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) |
| [ 0.015264] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) |
| [ 0.015516] CPU: Physical Processor ID: 0 |
| [ 0.015517] CPU: Processor Core ID: 0 |
| [ 0.015525] mce: CPU supports 7 MCE banks |
| [ 0.015536] CPU0: Thermal monitoring enabled (TM1) |
| [ 0.015547] process: using mwait in idle threads |
| [ 0.015551] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 |
| [ 0.015551] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 |
| [ 0.015665] Freeing SMP alternatives memory: 28K |
| [ 0.017082] smpboot: Max logical packages: 2 |
| [ 0.017087] DMAR: Host address width 36 |
| [ 0.017088] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 |
| [ 0.017097] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a |
| [ 0.017098] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 |
| [ 0.017102] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a |
| [ 0.017104] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 |
| [ 0.017105] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 |
| [ 0.017107] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. |
| [ 0.017456] DMAR-IR: Enabled IRQ remapping in x2apic mode |
| [ 0.017457] x2apic enabled |
| [ 0.017463] Switched APIC routing to cluster x2apic. |
| [ 0.017942] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 |
| [ 0.057645] TSC deadline timer enabled |
| [ 0.057649] smpboot: CPU0: Intel(R) Core(TM) i5-3437U CPU @ 1.90GHz (family: 0x6, model: 0x3a, stepping: 0x9) |
| [ 0.057745] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. |
| [ 0.057774] ... version: 3 |
| [ 0.057774] ... bit width: 48 |
| [ 0.057775] ... generic registers: 4 |
| [ 0.057776] ... value mask: 0000ffffffffffff |
| [ 0.057776] ... max period: 00007fffffffffff |
| [ 0.057777] ... fixed-purpose events: 3 |
| [ 0.057778] ... event mask: 000000070000000f |
| [ 0.057825] Hierarchical SRCU implementation. |
| [ 0.058431] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. |
| [ 0.058448] smp: Bringing up secondary CPUs ... |
| [ 0.058561] x86: Booting SMP configuration: |
| [ 0.058563] .... node #0, CPUs: #1 #2 #3 |
| [ 0.062503] smp: Brought up 1 node, 4 CPUs |
| [ 0.062503] smpboot: Total of 4 processors activated (15165.56 BogoMIPS) |
| [ 0.064412] devtmpfs: initialized |
| [ 0.064412] x86/mm: Memory block size: 128MB |
| [ 0.065368] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns |
| [ 0.065368] futex hash table entries: 1024 (order: 4, 65536 bytes) |
| [ 0.065368] pinctrl core: initialized pinctrl subsystem |
| [ 0.065368] NET: Registered protocol family 16 |
| [ 0.065368] cpuidle: using governor ladder |
| [ 0.065368] cpuidle: using governor menu |
| [ 0.065368] ACPI: bus type PCI registered |
| [ 0.065368] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 |
| [ 0.065368] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) |
| [ 0.065368] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 |
| [ 0.065368] PCI: Using configuration type 1 for base access |
| [ 0.065368] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on |
| [ 0.065368] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages |
| [ 0.068049] ACPI: Added _OSI(Module Device) |
| [ 0.068050] ACPI: Added _OSI(Processor Device) |
| [ 0.068051] ACPI: Added _OSI(3.0 _SCP Extensions) |
| [ 0.068052] ACPI: Added _OSI(Processor Aggregator Device) |
| [ 0.068202] ACPI: Executed 1 blocks of module-level executable AML code |
| [ 0.070206] ACPI Error: No handler for Region [ECRM] (ffff929ee49228b8) [EmbeddedControl] (20170728/evregion-166) |
| [ 0.070272] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20170728/exfldio-299) |
| [ 0.070332] ACPI Error: Method parse/execution failed \_SB.PCI0.LPCB.EC0._REG, AE_NOT_EXIST (20170728/psparse-550) |
| [ 0.071057] ACPI: EC: EC started |
| [ 0.071058] ACPI: EC: interrupt blocked |
| [ 0.084207] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC |
| [ 0.084209] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62 |
| [ 0.084211] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions |
| [ 0.084212] ACPI: Interpreter enabled |
| [ 0.084232] ACPI: (supports S0 S3 S4 S5) |
| [ 0.084233] ACPI: Using IOAPIC for interrupt routing |
| [ 0.084256] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| [ 0.084403] ACPI: GPE 0x01 active on init |
| [ 0.084412] ACPI: Enabled 1 GPEs in block 00 to 3F |
| [ 0.088494] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) |
| [ 0.088499] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] |
| [ 0.088563] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] |
| [ 0.088574] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge |
| [ 0.088638] acpi PNP0A08:00: ignoring host bridge window [mem 0x000c4000-0x000c7fff window] (conflicts with Video ROM [mem 0x000c0000-0x000c6bff]) |
| [ 0.088814] PCI host bridge to bus 0000:00 |
| [ 0.088816] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] |
| [ 0.088818] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] |
| [ 0.088819] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] |
| [ 0.088821] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] |
| [ 0.088822] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] |
| [ 0.088823] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window] |
| [ 0.088825] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] |
| [ 0.088826] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] |
| [ 0.088828] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] |
| [ 0.088829] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] |
| [ 0.088830] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] |
| [ 0.088832] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] |
| [ 0.088833] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window] |
| [ 0.088834] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window] |
| [ 0.088836] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window] |
| [ 0.088837] pci_bus 0000:00: root bus resource [mem 0x8ea00001-0xf7ffffff window] |
| [ 0.088839] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] |
| [ 0.088841] pci_bus 0000:00: root bus resource [bus 00-ff] |
| [ 0.088849] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000 |
| [ 0.088954] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000 |
| [ 0.088968] pci 0000:00:02.0: reg 0x10: [mem 0xf1400000-0xf17fffff 64bit] |
| [ 0.088975] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] |
| [ 0.088980] pci 0000:00:02.0: reg 0x20: [io 0x2000-0x203f] |
| [ 0.089071] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000 |
| [ 0.089082] pci 0000:00:04.0: reg 0x10: [mem 0xf1930000-0xf1937fff 64bit] |
| [ 0.089197] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330 |
| [ 0.089223] pci 0000:00:14.0: reg 0x10: [mem 0xf1920000-0xf192ffff 64bit] |
| [ 0.089299] pci 0000:00:14.0: PME# supported from D3hot D3cold |
| [ 0.089388] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000 |
| [ 0.089409] pci 0000:00:19.0: reg 0x10: [mem 0xf1900000-0xf191ffff] |
| [ 0.089418] pci 0000:00:19.0: reg 0x14: [mem 0xf193c000-0xf193cfff] |
| [ 0.089427] pci 0000:00:19.0: reg 0x18: [io 0x2040-0x205f] |
| [ 0.089492] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold |
| [ 0.089568] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 |
| [ 0.089592] pci 0000:00:1a.0: reg 0x10: [mem 0xf193e000-0xf193e3ff] |
| [ 0.089681] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold |
| [ 0.089766] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300 |
| [ 0.089790] pci 0000:00:1b.0: reg 0x10: [mem 0xf1938000-0xf193bfff 64bit] |
| [ 0.089871] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold |
| [ 0.089957] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400 |
| [ 0.090042] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold |
| [ 0.090130] pci 0000:00:1c.1: [8086:1e14] type 01 class 0x060400 |
| [ 0.090218] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold |
| [ 0.090306] pci 0000:00:1c.2: [8086:1e16] type 01 class 0x060400 |
| [ 0.090392] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold |
| [ 0.090488] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 |
| [ 0.090512] pci 0000:00:1d.0: reg 0x10: [mem 0xf193f000-0xf193f3ff] |
| [ 0.090601] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold |
| [ 0.090685] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100 |
| [ 0.090870] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601 |
| [ 0.090892] pci 0000:00:1f.2: reg 0x10: [io 0x2080-0x2087] |
| [ 0.090901] pci 0000:00:1f.2: reg 0x14: [io 0x2090-0x2093] |
| [ 0.090911] pci 0000:00:1f.2: reg 0x18: [io 0x2088-0x208f] |
| [ 0.090920] pci 0000:00:1f.2: reg 0x1c: [io 0x2094-0x2097] |
| [ 0.090928] pci 0000:00:1f.2: reg 0x20: [io 0x2060-0x207f] |
| [ 0.090937] pci 0000:00:1f.2: reg 0x24: [mem 0xf193d000-0xf193d7ff] |
| [ 0.090986] pci 0000:00:1f.2: PME# supported from D3hot |
| [ 0.091116] pci 0000:00:1c.0: PCI bridge to [bus 01] |
| [ 0.091216] pci 0000:02:00.0: [197b:2392] type 00 class 0x088000 |
| [ 0.091262] pci 0000:02:00.0: reg 0x10: [mem 0xf0810000-0xf08100ff] |
| [ 0.091377] pci 0000:02:00.0: reg 0x30: [mem 0xf0800000-0xf080ffff pref] |
| [ 0.091397] pci 0000:02:00.0: Enabling fixed DMA alias to 00.1 |
| [ 0.091574] pci 0000:02:00.2: [197b:2391] type 00 class 0x080501 |
| [ 0.091619] pci 0000:02:00.2: reg 0x10: [mem 0xf0811000-0xf08110ff] |
| [ 0.091915] pci 0000:02:00.3: [197b:2393] type 00 class 0x088000 |
| [ 0.091960] pci 0000:02:00.3: reg 0x10: [mem 0xf0812000-0xf08120ff] |
| [ 0.092261] pci 0000:02:00.4: [197b:2394] type 00 class 0x088000 |
| [ 0.092308] pci 0000:02:00.4: reg 0x10: [mem 0xf0813000-0xf08130ff] |
| [ 0.104057] pci 0000:00:1c.1: PCI bridge to [bus 02] |
| [ 0.104061] pci 0000:00:1c.1: bridge window [io 0x1000-0x1fff] |
| [ 0.104066] pci 0000:00:1c.1: bridge window [mem 0xf0000000-0xf08fffff] |
| [ 0.104072] pci 0000:00:1c.1: bridge window [mem 0xf0c00000-0xf13fffff 64bit pref] |
| [ 0.104158] pci 0000:03:00.0: [168c:0034] type 00 class 0x028000 |
| [ 0.104222] pci 0000:03:00.0: reg 0x10: [mem 0xf1800000-0xf187ffff 64bit] |
| [ 0.104319] pci 0000:03:00.0: reg 0x30: [mem 0xf1880000-0xf188ffff pref] |
| [ 0.104445] pci 0000:03:00.0: supports D1 D2 |
| [ 0.104447] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.116060] pci 0000:00:1c.2: PCI bridge to [bus 03] |
| [ 0.116067] pci 0000:00:1c.2: bridge window [mem 0xf1800000-0xf18fffff] |
| [ 0.116214] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.116276] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.116335] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.116392] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.116449] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.116506] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.116563] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.116620] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15) |
| [ 0.117174] ACPI: EC: interrupt unblocked |
| [ 0.117180] ACPI: EC: event unblocked |
| [ 0.117186] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62 |
| [ 0.117188] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events |
| [ 0.117255] pci 0000:00:02.0: vgaarb: setting as boot VGA device |
| [ 0.117255] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none |
| [ 0.117255] pci 0000:00:02.0: vgaarb: bridge control possible |
| [ 0.117255] vgaarb: loaded |
| [ 0.117255] EDAC MC: Ver: 3.0.0 |
| [ 0.117255] PCI: Using ACPI for IRQ routing |
| [ 0.117716] PCI: pci_cache_line_size set to 64 bytes |
| [ 0.117792] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] |
| [ 0.117793] e820: reserve RAM buffer [mem 0x7feef000-0x7fffffff] |
| [ 0.117794] e820: reserve RAM buffer [mem 0x371600000-0x373ffffff] |
| [ 0.117917] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 |
| [ 0.117917] hpet0: 8 comparators, 64-bit 14.318180 MHz counter |
| [ 0.121023] clocksource: Switched to clocksource hpet |
| [ 0.131749] VFS: Disk quotas dquot_6.6.0 |
| [ 0.131776] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) |
| [ 0.131894] AppArmor: AppArmor Filesystem Enabled |
| [ 0.131917] pnp: PnP ACPI init |
| [ 0.132045] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved |
| [ 0.132047] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved |
| [ 0.132050] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved |
| [ 0.132052] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved |
| [ 0.132054] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved |
| [ 0.132056] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved |
| [ 0.132057] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved |
| [ 0.132059] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved |
| [ 0.132061] system 00:00: [mem 0x20000000-0x201fffff] could not be reserved |
| [ 0.132063] system 00:00: [mem 0x40000000-0x401fffff] could not be reserved |
| [ 0.132069] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) |
| [ 0.132479] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved |
| [ 0.132484] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) |
| [ 0.132533] system 00:02: [io 0x0500-0x057f] has been reserved |
| [ 0.132535] system 00:02: [io 0x0480-0x04bf] has been reserved |
| [ 0.132539] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) |
| [ 0.132562] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) |
| [ 0.132599] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) |
| [ 0.132630] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active) |
| [ 0.132661] pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active) |
| [ 0.132681] pnp: PnP ACPI: found 7 devices |
| [ 0.139352] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns |
| [ 0.139387] pci 0000:00:1c.0: PCI bridge to [bus 01] |
| [ 0.139403] pci 0000:00:1c.1: PCI bridge to [bus 02] |
| [ 0.139407] pci 0000:00:1c.1: bridge window [io 0x1000-0x1fff] |
| [ 0.139412] pci 0000:00:1c.1: bridge window [mem 0xf0000000-0xf08fffff] |
| [ 0.139417] pci 0000:00:1c.1: bridge window [mem 0xf0c00000-0xf13fffff 64bit pref] |
| [ 0.139423] pci 0000:00:1c.2: PCI bridge to [bus 03] |
| [ 0.139429] pci 0000:00:1c.2: bridge window [mem 0xf1800000-0xf18fffff] |
| [ 0.139440] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] |
| [ 0.139441] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] |
| [ 0.139443] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] |
| [ 0.139444] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] |
| [ 0.139446] pci_bus 0000:00: resource 8 [mem 0x000c8000-0x000cbfff window] |
| [ 0.139447] pci_bus 0000:00: resource 9 [mem 0x000cc000-0x000cffff window] |
| [ 0.139449] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window] |
| [ 0.139450] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window] |
| [ 0.139451] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window] |
| [ 0.139453] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window] |
| [ 0.139454] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window] |
| [ 0.139456] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window] |
| [ 0.139457] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window] |
| [ 0.139459] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window] |
| [ 0.139460] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff window] |
| [ 0.139461] pci_bus 0000:00: resource 19 [mem 0x8ea00001-0xf7ffffff window] |
| [ 0.139463] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed44fff window] |
| [ 0.139465] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff] |
| [ 0.139466] pci_bus 0000:02: resource 1 [mem 0xf0000000-0xf08fffff] |
| [ 0.139467] pci_bus 0000:02: resource 2 [mem 0xf0c00000-0xf13fffff 64bit pref] |
| [ 0.139469] pci_bus 0000:03: resource 1 [mem 0xf1800000-0xf18fffff] |
| [ 0.139565] NET: Registered protocol family 2 |
| [ 0.139784] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) |
| [ 0.140060] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) |
| [ 0.140193] TCP: Hash tables configured (established 131072 bind 65536) |
| [ 0.140239] UDP hash table entries: 8192 (order: 6, 262144 bytes) |
| [ 0.140289] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) |
| [ 0.140382] NET: Registered protocol family 1 |
| [ 0.140397] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] |
| [ 0.140947] PCI: CLS 64 bytes, default 64 |
| [ 0.140996] Unpacking initramfs... |
| [ 0.611451] Freeing initrd memory: 22416K |
| [ 0.611509] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) |
| [ 0.611512] software IO TLB [mem 0x7beef000-0x7feef000] (64MB) mapped at [ffff929bfbeef000-ffff929bffeeefff] |
| [ 0.611945] audit: initializing netlink subsys (disabled) |
| [ 0.612031] audit: type=2000 audit(1515817093.612:1): state=initialized audit_enabled=0 res=1 |
| [ 0.612427] workingset: timestamp_bits=40 max_order=22 bucket_order=0 |
| [ 0.612478] zbud: loaded |
| [ 1.059376] Key type asymmetric registered |
| [ 1.059378] Asymmetric key parser 'x509' registered |
| [ 1.059397] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) |
| [ 1.059447] io scheduler noop registered |
| [ 1.059449] io scheduler deadline registered |
| [ 1.059465] io scheduler cfq registered (default) |
| [ 1.059466] io scheduler mq-deadline registered |
| [ 1.060140] pcieport 0000:00:1c.0: Signaling PME with IRQ 26 |
| [ 1.060174] pcieport 0000:00:1c.1: Signaling PME with IRQ 27 |
| [ 1.060223] pcieport 0000:00:1c.2: Signaling PME with IRQ 28 |
| [ 1.060249] pciehp 0000:00:1c.1:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+ |
| [ 1.060298] intel_idle: MWAIT substates: 0x21120 |
| [ 1.060299] intel_idle: v0.4.1 model 0x3A |
| [ 1.060467] intel_idle: lapic_timer_reliable_states 0xffffffff |
| [ 1.060988] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
| [ 1.061426] Linux agpgart interface v0.103 |
| [ 1.088176] tpm_tis 00:06: 1.2 TPM (device-id 0xB, rev-id 16) |
| [ 1.212039] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de> |
| [ 1.212040] AMD IOMMUv2 functionality not available on this system |
| [ 1.212569] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 |
| [ 1.214356] i8042: Detected active multiplexing controller, rev 1.1 |
| [ 1.215124] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| [ 1.215130] serio: i8042 AUX0 port at 0x60,0x64 irq 12 |
| [ 1.215164] serio: i8042 AUX1 port at 0x60,0x64 irq 12 |
| [ 1.215187] serio: i8042 AUX2 port at 0x60,0x64 irq 12 |
| [ 1.215210] serio: i8042 AUX3 port at 0x60,0x64 irq 12 |
| [ 1.215545] mousedev: PS/2 mouse device common for all mice |
| [ 1.215604] rtc_cmos 00:03: RTC can wake from S4 |
| [ 1.215805] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 |
| [ 1.215839] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs |
| [ 1.215857] intel_pstate: Intel P-state driver initializing |
| [ 1.216219] ledtrig-cpu: registered to indicate activity on CPUs |
| [ 1.216705] NET: Registered protocol family 10 |
| [ 1.217297] Segment Routing with IPv6 |
| [ 1.217334] mip6: Mobile IPv6 |
| [ 1.217338] NET: Registered protocol family 17 |
| [ 1.217343] mpls_gso: MPLS GSO support |
| [ 1.218033] microcode: sig=0x306a9, pf=0x10, revision=0x1b |
| [ 1.218305] microcode: Microcode Update Driver: v2.2. |
| [ 1.218333] sched_clock: Marking stable (1218270597, 0)->(1218035324, 235273) |
| [ 1.219019] registered taskstats version 1 |
| [ 1.219062] zswap: loaded using pool lzo/zbud |
| [ 1.219254] AppArmor: AppArmor sha1 policy hashing enabled |
| [ 1.240246] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 |
| [ 1.536497] rtc_cmos 00:03: setting system clock to 2018-01-13 04:18:15 UTC (1515817095) |
| [ 1.541313] Freeing unused kernel memory: 1484K |
| [ 1.541317] Write protecting the kernel read-only data: 12288k |
| [ 1.542304] Freeing unused kernel memory: 1260K |
| [ 1.545426] Freeing unused kernel memory: 1060K |
| [ 1.551422] x86/mm: Checked W+X mappings: passed, no W+X pages found. |
| [ 1.628025] tsc: Refined TSC clocksource calibration: 1895.693 MHz |
| [ 1.628034] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x36a68ea8fe5, max_idle_ns: 881590678518 ns |
| [ 1.659884] pps_core: LinuxPPS API ver. 1 registered |
| [ 1.659885] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> |
| [ 1.660128] PTP clock support registered |
| [ 1.661531] ACPI: bus type USB registered |
| [ 1.661552] usbcore: registered new interface driver usbfs |
| [ 1.661561] usbcore: registered new interface driver hub |
| [ 1.661583] usbcore: registered new device driver usb |
| [ 1.662033] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k |
| [ 1.662034] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. |
| [ 1.662108] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| [ 1.662113] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode |
| [ 1.662249] sdhci: Secure Digital Host Controller Interface driver |
| [ 1.662250] sdhci: Copyright(c) Pierre Ossman |
| [ 1.662331] ehci-pci: EHCI PCI platform driver |
| [ 1.662888] sdhci-pci 0000:02:00.0: SDHCI controller found [197b:2392] (rev 30) |
| [ 1.666539] SCSI subsystem initialized |
| [ 1.667899] libata version 3.00 loaded. |
| [ 1.668105] mmc0: SDHCI controller on PCI [0000:02:00.0] using DMA |
| [ 1.668132] sdhci-pci 0000:02:00.2: SDHCI controller found [197b:2391] (rev 30) |
| [ 1.668392] sdhci-pci 0000:02:00.2: Refusing to bind to secondary interface. |
| [ 1.677064] AVX version of gcm_enc/dec engaged. |
| [ 1.677066] AES CTR mode by8 optimization enabled |
| [ 1.805941] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock |
| [ 1.930820] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) d4:c9:ef:f7:55:c2 |
| [ 1.930821] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection |
| [ 1.930876] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF |
| [ 1.931226] ehci-pci 0000:00:1a.0: EHCI Host Controller |
| [ 1.931233] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 |
| [ 1.931249] ehci-pci 0000:00:1a.0: debug port 2 |
| [ 1.935157] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported |
| [ 1.935200] ehci-pci 0000:00:1a.0: irq 21, io mem 0xf193e000 |
| [ 1.948066] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 |
| [ 1.948203] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 |
| [ 1.948206] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.948209] usb usb1: Product: EHCI Host Controller |
| [ 1.948212] usb usb1: Manufacturer: Linux 4.14.0-2-amd64 ehci_hcd |
| [ 1.948214] usb usb1: SerialNumber: 0000:00:1a.0 |
| [ 1.948572] hub 1-0:1.0: USB hub found |
| [ 1.948591] hub 1-0:1.0: 3 ports detected |
| [ 1.949141] ehci-pci 0000:00:1d.0: EHCI Host Controller |
| [ 1.949152] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 |
| [ 1.949172] ehci-pci 0000:00:1d.0: debug port 2 |
| [ 1.953097] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported |
| [ 1.953141] ehci-pci 0000:00:1d.0: irq 19, io mem 0xf193f000 |
| [ 1.968097] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 |
| [ 1.968188] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 |
| [ 1.968191] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.968194] usb usb2: Product: EHCI Host Controller |
| [ 1.968196] usb usb2: Manufacturer: Linux 4.14.0-2-amd64 ehci_hcd |
| [ 1.968198] usb usb2: SerialNumber: 0000:00:1d.0 |
| [ 1.968536] hub 2-0:1.0: USB hub found |
| [ 1.968557] hub 2-0:1.0: 3 ports detected |
| [ 1.969304] xhci_hcd 0000:00:14.0: xHCI Host Controller |
| [ 1.969318] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 |
| [ 1.970459] xhci_hcd 0000:00:14.0: hcc params 0x200071a1 hci version 0x100 quirks 0x0000b930 |
| [ 1.970470] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported |
| [ 1.970724] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 |
| [ 1.970729] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.970733] usb usb3: Product: xHCI Host Controller |
| [ 1.970737] usb usb3: Manufacturer: Linux 4.14.0-2-amd64 xhci-hcd |
| [ 1.970741] usb usb3: SerialNumber: 0000:00:14.0 |
| [ 1.971099] hub 3-0:1.0: USB hub found |
| [ 1.971126] hub 3-0:1.0: 4 ports detected |
| [ 1.971554] xhci_hcd 0000:00:14.0: xHCI Host Controller |
| [ 1.971561] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 |
| [ 1.971647] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 |
| [ 1.971650] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 1.971652] usb usb4: Product: xHCI Host Controller |
| [ 1.971654] usb usb4: Manufacturer: Linux 4.14.0-2-amd64 xhci-hcd |
| [ 1.971657] usb usb4: SerialNumber: 0000:00:14.0 |
| [ 1.971989] hub 4-0:1.0: USB hub found |
| [ 1.972037] hub 4-0:1.0: 4 ports detected |
| [ 1.972562] ahci 0000:00:1f.2: version 3.0 |
| [ 1.972931] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled |
| [ 1.972974] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1 impl SATA mode |
| [ 1.972981] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst |
| [ 1.975068] scsi host0: ahci |
| [ 1.975586] scsi host1: ahci |
| [ 1.977039] scsi host2: ahci |
| [ 1.977366] scsi host3: ahci |
| [ 1.977585] scsi host4: ahci |
| [ 1.977810] scsi host5: ahci |
| [ 1.977973] ata1: SATA max UDMA/133 abar m2048@0xf193d000 port 0xf193d100 irq 31 |
| [ 1.977976] ata2: DUMMY |
| [ 1.977978] ata3: DUMMY |
| [ 1.977980] ata4: DUMMY |
| [ 1.977982] ata5: DUMMY |
| [ 1.977984] ata6: DUMMY |
| [ 2.284066] usb 1-1: new high-speed USB device number 2 using ehci-pci |
| [ 2.291064] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| [ 2.291493] ata1.00: ATA-9: TOSHIBA THNSNH256GMCT, HTLAN102, max UDMA/100 |
| [ 2.291499] ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA |
| [ 2.292530] ata1.00: configured for UDMA/100 |
| [ 2.292979] scsi 0:0:0:0: Direct-Access ATA TOSHIBA THNSNH25 N102 PQ: 0 ANSI: 5 |
| [ 2.300988] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB) |
| [ 2.301024] sd 0:0:0:0: [sda] Write Protect is off |
| [ 2.301032] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 |
| [ 2.301089] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| [ 2.303395] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 |
| [ 2.304015] usb 2-1: new high-speed USB device number 2 using ehci-pci |
| [ 2.304022] usb 3-1: new high-speed USB device number 2 using xhci_hcd |
| [ 2.304058] sd 0:0:0:0: [sda] Attached SCSI disk |
| [ 2.408015] raid6: sse2x1 gen() 7713 MB/s |
| [ 2.448364] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 |
| [ 2.448366] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 2.448646] hub 1-1:1.0: USB hub found |
| [ 2.448737] hub 1-1:1.0: 6 ports detected |
| [ 2.452373] usb 3-1: New USB device found, idVendor=0424, idProduct=2134 |
| [ 2.452374] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 2.452375] usb 3-1: Product: USB2134B |
| [ 2.452376] usb 3-1: Manufacturer: SMSC |
| [ 2.452599] hub 3-1:1.0: USB hub found |
| [ 2.452621] hub 3-1:1.0: 4 ports detected |
| [ 2.468362] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 |
| [ 2.468364] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| [ 2.468646] hub 2-1:1.0: USB hub found |
| [ 2.468737] hub 2-1:1.0: 8 ports detected |
| [ 2.476006] raid6: sse2x1 xor() 6084 MB/s |
| [ 2.544013] raid6: sse2x2 gen() 10362 MB/s |
| [ 2.580061] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd |
| [ 2.600413] usb 4-1: New USB device found, idVendor=0424, idProduct=5534 |
| [ 2.600415] usb 4-1: New USB device strings: Mfr=2, Product=3, SerialNumber=0 |
| [ 2.600416] usb 4-1: Product: USB5534B |
| [ 2.600417] usb 4-1: Manufacturer: SMSC |
| [ 2.600867] hub 4-1:1.0: USB hub found |
| [ 2.601384] hub 4-1:1.0: 4 ports detected |
| [ 2.612013] raid6: sse2x2 xor() 6756 MB/s |
| [ 2.680010] raid6: sse2x4 gen() 10692 MB/s |
| [ 2.748005] raid6: sse2x4 xor() 4900 MB/s |
| [ 2.748006] raid6: using algorithm sse2x4 gen() 10692 MB/s |
| [ 2.748007] raid6: .... xor() 4900 MB/s, rmw enabled |
| [ 2.748008] raid6: using ssse3x2 recovery algorithm |
| [ 2.748020] clocksource: Switched to clocksource tsc |
| [ 2.748321] xor: automatically using best checksumming function avx |
| [ 2.748535] async_tx: api initialized (async) |
| [ 2.764835] Btrfs loaded, crc32c=crc32c-intel |
| [ 2.832029] usb 1-1.1: new full-speed USB device number 3 using ehci-pci |
| [ 2.902169] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null) |
| [ 2.952373] usb 1-1.1: New USB device found, idVendor=03eb, idProduct=840b |
| [ 2.952375] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 2.952376] usb 1-1.1: Product: Atmel maXTouch Digitizer |
| [ 2.952377] usb 1-1.1: Manufacturer: Atmel |
| [ 2.984063] ip_tables: (C) 2000-2006 Netfilter Core Team |
| [ 2.990188] systemd[1]: systemd 236 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid) |
| [ 2.990301] systemd[1]: Detected architecture x86-64. |
| [ 2.990526] systemd[1]: Set hostname to <universi-550c22>. |
| [ 3.032022] usb 1-1.2: new full-speed USB device number 4 using ehci-pci |
| [ 3.045987] systemd[1]: File /lib/systemd/system/systemd-journald.service:35 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. |
| [ 3.046003] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) |
| [ 3.103410] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. |
| [ 3.103578] systemd[1]: Created slice User and Session Slice. |
| [ 3.103617] systemd[1]: Started Forward Password Requests to Wall Directory Watch. |
| [ 3.103626] systemd[1]: Reached target Swap. |
| [ 3.103633] systemd[1]: Reached target Libvirt guests shutdown. |
| [ 3.124486] EXT4-fs (sda4): re-mounted. Opts: discard,user_xattr,errors=remount-ro |
| [ 3.128146] RPC: Registered named UNIX socket transport module. |
| [ 3.128147] RPC: Registered udp transport module. |
| [ 3.128148] RPC: Registered tcp transport module. |
| [ 3.128149] RPC: Registered tcp NFSv4.1 backchannel transport module. |
| [ 3.128370] lp: driver loaded but no devices found |
| [ 3.132048] ppdev: user-space parallel port driver |
| [ 3.141738] usb 1-1.2: string descriptor 0 read error: -22 |
| [ 3.141795] usb 1-1.2: New USB device found, idVendor=04ca, idProduct=3006 |
| [ 3.141797] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [ 3.144065] drbd: initialized. Version: 8.4.10 (api:1/proto:86-101) |
| [ 3.144067] drbd: srcversion: 75EFA3DCEBEF5C771A0FCFC |
| [ 3.144068] drbd: registered as block device major 147 |
| [ 3.183821] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input8 |
| [ 3.220023] usb 1-1.3: new high-speed USB device number 5 using ehci-pci |
| [ 3.267608] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1f/PNP0C09:00/PNP0C0D:00/input/input9 |
| [ 3.267644] ACPI: Lid Switch [LID] |
| [ 3.267713] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input10 |
| [ 3.267730] ACPI: Power Button [PWRF] |
| [ 3.269156] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 |
| [ 3.293766] ACPI: AC Adapter [AC] (on-line) |
| [ 3.339730] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20170728/utaddress-247) |
| [ 3.339737] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 3.339740] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20170728/utaddress-247) |
| [ 3.339744] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 3.339744] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20170728/utaddress-247) |
| [ 3.339748] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 3.339749] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20170728/utaddress-247) |
| [ 3.339753] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| [ 3.339753] lpc_ich: Resource conflict(s) found affecting gpio_ich |
| [ 3.340026] sd 0:0:0:0: Attached scsi generic sg0 type 0 |
| [ 3.345304] ACPI: Battery Slot [BAT0] (battery present) |
| [ 3.345405] ACPI: Battery Slot [BAT1] (battery absent) |
| [ 3.354455] [drm] Memory usable by graphics device = 2048M |
| [ 3.354457] [drm] Replacing VGA console driver |
| [ 3.355374] Console: switching to colour dummy device 80x25 |
| [ 3.356268] input: PC Speaker as /devices/platform/pcspkr/input/input11 |
| [ 3.378376] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer |
| [ 3.378378] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules |
| [ 3.378379] RAPL PMU: hw unit of domain package 2^-16 Joules |
| [ 3.378379] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules |
| [ 3.380369] usb 1-1.3: New USB device found, idVendor=05c8, idProduct=034b |
| [ 3.380372] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| [ 3.380374] usb 1-1.3: Product: HP HD Webcam [Fixed] |
| [ 3.380375] usb 1-1.3: Manufacturer: SPCA2062 PC Camera |
| [ 3.396547] ath: phy0: ASPM enabled: 0x43 |
| [ 3.396549] ath: EEPROM regdomain: 0x6a |
| [ 3.396550] ath: EEPROM indicates we should expect a direct regpair map |
| [ 3.396552] ath: Country alpha2 being used: 00 |
| [ 3.396552] ath: Regpair used: 0x6a |
| [ 3.417086] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). |
| [ 3.417088] [drm] Driver supports precise vblank timestamp query. |
| [ 3.417394] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem |
| [ 3.422704] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' |
| [ 3.423049] ieee80211 phy0: Atheros AR9462 Rev:2 mem=0xffffaf0242380000, irq=19 |
| [ 3.462714] [drm] Initialized i915 1.6.0 20170818 for 0000:00:02.0 on minor 0 |
| [ 3.462901] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) |
| [ 3.463251] iTCO_vendor_support: vendor-support=0 |
| [ 3.463787] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 |
| [ 3.463830] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560) |
| [ 3.463945] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) |
| [ 3.467874] acpi device:03: registered as cooling_device4 |
| [ 3.467947] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input12 |
| [ 3.544039] usb 1-1.5: new high-speed USB device number 6 using ehci-pci |
| [ 3.616253] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) |
| [ 3.632120] snd_hda_codec_idt hdaudioC0D0: autoconfig for 92HD91BXX: line_outs=1 (0xa/0x0/0x0/0x0/0x0) type:line |
| [ 3.632123] snd_hda_codec_idt hdaudioC0D0: speaker_outs=1 (0xd/0x0/0x0/0x0/0x0) |
| [ 3.632125] snd_hda_codec_idt hdaudioC0D0: hp_outs=1 (0xb/0x0/0x0/0x0/0x0) |
| [ 3.632127] snd_hda_codec_idt hdaudioC0D0: mono: mono_out=0x0 |
| [ 3.632128] snd_hda_codec_idt hdaudioC0D0: inputs: |
| [ 3.632130] snd_hda_codec_idt hdaudioC0D0: Mic=0xc |
| [ 3.632132] snd_hda_codec_idt hdaudioC0D0: Internal Mic=0x11 |
| [ 3.632133] snd_hda_codec_idt hdaudioC0D0: Line=0xf |
| [ 3.669071] intel_rapl: Found RAPL domain package |
| [ 3.669073] intel_rapl: Found RAPL domain core |
| [ 3.669074] intel_rapl: Found RAPL domain uncore |
| [ 3.687604] usb 1-1.5: config 1 has an invalid interface number: 12 but max is 4 |
| [ 3.687606] usb 1-1.5: config 1 has an invalid interface number: 13 but max is 4 |
| [ 3.687607] usb 1-1.5: config 1 has an invalid interface number: 13 but max is 4 |
| [ 3.687608] usb 1-1.5: config 1 has no interface number 1 |
| [ 3.687610] usb 1-1.5: config 1 has no interface number 4 |
| [ 3.692746] usb 1-1.5: New USB device found, idVendor=1199, idProduct=9071 |
| [ 3.692747] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [ 3.692749] usb 1-1.5: Product: Sierra Wireless MC7430 Qualcomm® Snapdragon™ X7 LTE-A |
| [ 3.692750] usb 1-1.5: Manufacturer: Sierra Wireless, Incorporated |
| [ 3.692751] usb 1-1.5: SerialNumber: LU55030047011009 |
| [ 3.708088] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 |
| [ 3.725309] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 |
| [ 3.725436] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 |
| [ 3.725591] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16 |
| [ 3.725720] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17 |
| [ 3.725878] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18 |
| [ 3.726008] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19 |
| [ 3.768206] fbcon: inteldrmfb (fb0) is primary device |
| [ 3.850419] Bluetooth: Core ver 2.22 |
| [ 3.850432] NET: Registered protocol family 31 |
| [ 3.850433] Bluetooth: HCI device and connection manager initialized |
| [ 3.850436] Bluetooth: HCI socket layer initialized |
| [ 3.850438] Bluetooth: L2CAP socket layer initialized |
| [ 3.850447] Bluetooth: SCO socket layer initialized |
| [ 3.853695] usbcore: registered new interface driver btusb |
| [ 3.855890] usb 1-1.2: firmware: direct-loading firmware ar3k/AthrBT_0x11020000.dfu |
| [ 3.893814] usb 1-1.2: firmware: direct-loading firmware ar3k/ramps_0x11020000_40.dfu |
| [ 3.897433] usbcore: registered new interface driver ath3k |
| [ 3.984651] usb 1-1.2: USB disconnect, device number 4 |
| [ 4.208075] usb 1-1.2: new full-speed USB device number 7 using ehci-pci |
| [ 4.317872] usb 1-1.2: string descriptor 0 read error: -22 |
| [ 4.317884] usb 1-1.2: New USB device found, idVendor=04ca, idProduct=3006 |
| [ 4.317889] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| [ 4.492815] Console: switching to colour frame buffer device 170x48 |
| [ 4.516630] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device |
| [ 4.620829] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: discard,user_xattr |
| [ 4.622673] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: discard,user_xattr |
| [ 4.639200] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: discard,user_xattr |
| [ 4.641520] EXT4-fs (sda10): mounted filesystem with ordered data mode. Opts: discard,user_xattr |
| [ 4.644218] EXT4-fs (sda3): mounting ext2 file system using the ext4 subsystem |
| [ 4.651978] EXT4-fs (sda3): mounted filesystem without journal. Opts: discard,user_xattr |
| [ 4.654897] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: discard,user_xattr |
| [ 4.659575] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: discard,user_xattr |
| [ 4.662720] systemd-journald[303]: Received request to flush runtime journal from PID 1 |
| [ 4.664967] FAT-fs (sda2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. |
| [ 4.736110] audit: type=1400 audit(1515817098.695:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=805 comm="apparmor_parser" |
| [ 4.736115] audit: type=1400 audit(1515817098.695:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man//filter" pid=805 comm="apparmor_parser" |
| [ 4.736117] audit: type=1400 audit(1515817098.695:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man//groff" pid=805 comm="apparmor_parser" |
| [ 4.738262] audit: type=1400 audit(1515817098.695:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=807 comm="apparmor_parser" |
| [ 4.739941] audit: type=1400 audit(1515817098.695:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=808 comm="apparmor_parser" |
| [ 4.744653] audit: type=1400 audit(1515817098.703:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="thunderbird" pid=806 comm="apparmor_parser" |
| [ 4.744658] audit: type=1400 audit(1515817098.703:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="thunderbird//gpg" pid=806 comm="apparmor_parser" |
| [ 4.744661] audit: type=1400 audit(1515817098.703:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="thunderbird//lsb_release" pid=806 comm="apparmor_parser" |
| [ 4.744664] audit: type=1400 audit(1515817098.703:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="thunderbird//sanitized_helper" pid=806 comm="apparmor_parser" |
| [ 4.792191] random: crng init done |
| [ 4.854792] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 |
| [ 4.854794] Bluetooth: BNEP filters: protocol multicast |
| [ 4.854798] Bluetooth: BNEP socket layer initialized |
| [ 4.964706] nfc: nfc_init: NFC Core ver 0.1 |
| [ 4.964730] NET: Registered protocol family 39 |
| [ 5.490657] hidraw: raw HID events driver (C) Jiri Kosina |
| [ 5.501521] usbcore: registered new interface driver usbhid |
| [ 5.501523] usbhid: USB HID core driver |
| [ 5.504762] hid-generic 0003:03EB:840B.0002: hiddev0,hidraw0: USB HID v1.11 Device [Atmel Atmel maXTouch Digitizer] on usb-0000:00:1a.0-1.1/input1 |
| [ 5.506707] input: Atmel Atmel maXTouch Digitizer as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:03EB:840B.0001/input/input20 |
| [ 5.542374] media: Linux media interface: v0.10 |
| [ 5.547210] Linux video capture interface: v2.00 |
| [ 5.558041] uvcvideo: Found UVC 1.00 device HP HD Webcam [Fixed] (05c8:034b) |
| [ 5.567298] input: Atmel Atmel maXTouch Digitizer Pen as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:03EB:840B.0001/input/input21 |
| [ 5.567319] uvcvideo 1-1.3:1.0: Entity type for entity Extension 4 was not initialized! |
| [ 5.567322] uvcvideo 1-1.3:1.0: Entity type for entity Extension 3 was not initialized! |
| [ 5.567324] uvcvideo 1-1.3:1.0: Entity type for entity Processing 2 was not initialized! |
| [ 5.567325] uvcvideo 1-1.3:1.0: Entity type for entity Camera 1 was not initialized! |
| [ 5.567434] input: HP HD Webcam [Fixed]: HP HD Web as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input22 |
| [ 5.567876] usbcore: registered new interface driver uvcvideo |
| [ 5.567877] USB Video Class driver (1.1.1) |
| [ 5.569561] hid-multitouch 0003:03EB:840B.0001: input,hidraw1: USB HID v1.11 Device [Atmel Atmel maXTouch Digitizer] on usb-0000:00:1a.0-1.1/input0 |
| [ 5.579945] usbcore: registered new interface driver usbserial |
| [ 5.579963] usbcore: registered new interface driver usbserial_generic |
| [ 5.579977] usbserial: USB Serial support registered for generic |
| [ 5.582059] usbcore: registered new interface driver qcserial |
| [ 5.582076] usbserial: USB Serial support registered for Qualcomm USB modem |
| [ 5.582478] qcserial 1-1.5:1.0: Qualcomm USB modem converter detected |
| [ 5.582613] usb 1-1.5: Qualcomm USB modem converter now attached to ttyUSB0 |
| [ 5.582973] qcserial 1-1.5:1.2: Qualcomm USB modem converter detected |
| [ 5.583307] usb 1-1.5: Qualcomm USB modem converter now attached to ttyUSB1 |
| [ 5.583723] qcserial 1-1.5:1.3: Qualcomm USB modem converter detected |
| [ 5.583841] usb 1-1.5: Qualcomm USB modem converter now attached to ttyUSB2 |
| [ 5.586805] usbcore: registered new interface driver cdc_ncm |
| [ 5.587926] usbcore: registered new interface driver cdc_wdm |
| [ 5.608859] cdc_mbim 1-1.5:1.12: cdc-wdm1: USB WDM device |
| [ 5.609078] cdc_mbim 1-1.5:1.12 wwan0: register 'cdc_mbim' at usb-0000:00:1a.0-1.5, CDC MBIM, 62:d0:72:c5:31:d5 |
| [ 5.609121] usbcore: registered new interface driver cdc_mbim |
| [ 5.613360] cdc_mbim 1-1.5:1.12 wwp0s26u1u5i12: renamed from wwan0 |
| [ 5.782424] ip6_tables: (C) 2000-2006 Netfilter Core Team |
| [ 5.858923] Ebtables v2.0 registered |
| [ 9.032302] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready |
| [ 9.292492] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready |
| [ 9.302832] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 9.314084] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 9.328018] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 9.759265] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 13.821812] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx |
| [ 13.821995] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready |
| [ 16.781609] Bluetooth: RFCOMM TTY layer initialized |
| [ 16.781617] Bluetooth: RFCOMM socket layer initialized |
| [ 16.781623] Bluetooth: RFCOMM ver 1.11 |
| [ 355.033563] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 670.065999] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 985.084244] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 1300.112018] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 1615.040586] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| [ 1930.049281] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready |